ARM: mxs: Rename M28EVK
The board is now manufactured by Aries Embedded GmbH , rename it.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/board/aries/m28evk/m28evk.c b/board/aries/m28evk/m28evk.c
new file mode 100644
index 0000000..c990ea9
--- /dev/null
+++ b/board/aries/m28evk/m28evk.c
@@ -0,0 +1,173 @@
+/*
+ * Aries M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+ /* IO0 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK0, 480000);
+ /* IO1 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK1, 480000);
+
+ /* SSP0 clock at 96MHz */
+ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
+
+#ifdef CONFIG_CMD_USB
+ mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ return mxs_dram_init();
+}
+
+#ifdef CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+ if (id != 0) {
+ printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+ return 1;
+ }
+
+ return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Configure WP as input. */
+ gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+ /* Turn on the power to the card. */
+ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
+
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+
+#define MII_OPMODE_STRAP_OVERRIDE 0x16
+#define MII_PHY_CTRL1 0x1e
+#define MII_PHY_CTRL2 0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
+ /* KZ8031 PHY on old boards. */
+ const uint32_t freq = 0x0080;
+#else
+ /* KZ8021 PHY on new boards. */
+ const uint32_t freq = 0x0000;
+#endif
+
+ miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+ miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+ if (phy == 3)
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct eth_device *dev;
+ int ret;
+
+ ret = cpu_eth_init(bis);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+ CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
+ /* Reset the new PHY */
+ gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
+ udelay(10000);
+ gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
+ udelay(10000);
+#endif
+
+ ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC0\n");
+ return ret;
+ }
+
+ ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC1\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC0");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC0 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC1");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC1 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+#endif