Merge tag 'u-boot-imx-20220616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-20220616
-------------------
Fixes for 2022.07 + Toradex apalis-imx8 (missed in last PR)
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12322
diff --git a/arch/arm/dts/imx6qdl-sr-som.dtsi b/arch/arm/dts/imx6qdl-sr-som.dtsi
index b065778..c20bed2 100644
--- a/arch/arm/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/dts/imx6qdl-sr-som.dtsi
@@ -55,7 +55,13 @@
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-handle = <&phy>;
phy-mode = "rgmii-id";
- phy-reset-duration = <2>;
+
+ /*
+ * The PHY seems to require a long-enough reset duration to avoid
+ * some rare issues where the PHY gets stuck in an inconsistent and
+ * non-functional state at boot-up. 10ms proved to be fine .
+ */
+ phy-reset-duration = <10>;
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
status = "okay";
@@ -64,8 +70,15 @@
#size-cells = <0>;
phy: ethernet-phy@0 {
- reg = <0>;
+ /*
+ * The PHY can appear either:
+ * - AR8035: at address 0 or 4
+ * - ADIN1300: at address 1
+ * Actual address being detected at runtime.
+ */
+ reg = <0xffffffff>;
qca,clk-out-frequency = <125000000>;
+ adi,phy-output-clock = "125mhz-free-running";
};
};
};
diff --git a/arch/arm/dts/imx8mn-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-evk-u-boot.dtsi
index 3db46d4..593cf06 100644
--- a/arch/arm/dts/imx8mn-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-evk-u-boot.dtsi
@@ -58,7 +58,9 @@
};
- flash {
+ spl {
+ filename = "spl.bin";
+
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 6553bf6..b0e6e43 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -3,6 +3,7 @@
imply CMD_BLOB
imply CMD_HASH if ARM
select FSL_CAAM
+ select ARCH_MISC_INIT
select SPL_BOARD_INIT if (ARM && SPL)
select SPL_HASH if (ARM && SPL)
select SHA_HW_ACCEL
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 6207bf8..42aa5cb 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -1,5 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
+ * Copyright (C) 2022 Josua Mayer <josua@solid-run.com>
+ *
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
@@ -39,6 +41,8 @@
#include <spl.h>
#include <usb.h>
#include <usb/ehci-ci.h>
+#include <netdev.h>
+#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -407,6 +411,80 @@
return 0;
}
+static int find_ethernet_phy(void)
+{
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int phy_addr = -ENOENT;
+
+#ifdef CONFIG_FEC_MXC
+ bus = fec_get_miibus(ENET_BASE_ADDR, -1);
+ if (!bus)
+ return -ENOENT;
+
+ // scan address 0, 1, 4
+ phydev = phy_find_by_mask(bus, 0b00010011);
+ if (!phydev) {
+ free(bus);
+ return -ENOENT;
+ }
+ pr_debug("%s: detected ethernet phy at address %d\n", __func__, phydev->addr);
+ phy_addr = phydev->addr;
+
+ free(phydev);
+#endif
+
+ return phy_addr;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+/*
+ * Configure the correct ethernet PHYs nodes in device-tree:
+ * - AR8035 at addresses 0 or 4: Cubox
+ * - AR8035 at address 0: HummingBoard, HummingBoard 2
+ * - ADIN1300 at address 1: since SoM rev 1.9
+ */
+int ft_board_setup(void *fdt, struct bd_info *bd)
+{
+ int node_phy0, node_phy1, node_phy4;
+ int ret, phy;
+ bool enable_phy0 = false, enable_phy1 = false, enable_phy4 = false;
+
+ // detect phy
+ phy = find_ethernet_phy();
+ if (phy == 0 || phy == 4) {
+ enable_phy0 = true;
+ switch (board_type()) {
+ case CUBOXI:
+ case UNKNOWN:
+ default:
+ enable_phy4 = true;
+ }
+ } else if (phy == 1) {
+ enable_phy1 = true;
+ } else {
+ pr_err("%s: couldn't detect ethernet phy, not patching dtb!\n", __func__);
+ return 0;
+ }
+
+ // update all phy nodes status
+ node_phy0 = fdt_path_offset(fdt, "/soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@0");
+ ret = fdt_setprop_string(fdt, node_phy0, "status", enable_phy0 ? "okay" : "disabled");
+ if (ret < 0 && enable_phy0)
+ pr_err("%s: failed to enable ethernet phy at address 0 in dtb!\n", __func__);
+ node_phy1 = fdt_path_offset(fdt, "/soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@1");
+ ret = fdt_setprop_string(fdt, node_phy1, "status", enable_phy1 ? "okay" : "disabled");
+ if (ret < 0 && enable_phy1)
+ pr_err("%s: failed to enable ethernet phy at address 1 in dtb!\n", __func__);
+ node_phy4 = fdt_path_offset(fdt, "/soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@4");
+ ret = fdt_setprop_string(fdt, node_phy4, "status", enable_phy4 ? "okay" : "disabled");
+ if (ret < 0 && enable_phy4)
+ pr_err("%s: failed to enable ethernet phy at address 4 in dtb!\n", __func__);
+
+ return 0;
+}
+#endif
+
/* Override the default implementation, DT model is not accurate */
int show_board_info(void)
{
diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c
index 04877fc..4081988 100644
--- a/board/toradex/apalis-imx8/apalis-imx8.c
+++ b/board/toradex/apalis-imx8/apalis-imx8.c
@@ -18,6 +18,7 @@
#include <env.h>
#include <errno.h>
#include <linux/libfdt.h>
+#include <linux/bitops.h>
#include "../common/tdx-cfg-block.h"
@@ -28,22 +29,75 @@
(SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
(SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+#define TDX_USER_FUSE_BLOCK1_A 276
+#define TDX_USER_FUSE_BLOCK1_B 277
+#define TDX_USER_FUSE_BLOCK2_A 278
+#define TDX_USER_FUSE_BLOCK2_B 279
+
static iomux_cfg_t uart1_pads[] = {
SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+struct tdx_user_fuses {
+ u16 pid4;
+ u16 vers;
+ u8 ramid;
+};
+
static void setup_iomux_uart(void)
{
imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
+static uint32_t do_get_tdx_user_fuse(int a, int b)
+{
+ sc_err_t sciErr;
+ u32 val_a = 0;
+ u32 val_b = 0;
+
+ sciErr = sc_misc_otp_fuse_read(-1, a, &val_a);
+ if (sciErr != SC_ERR_NONE) {
+ printf("Error reading out user fuse %d\n", a);
+ return 0;
+ }
+
+ sciErr = sc_misc_otp_fuse_read(-1, b, &val_b);
+ if (sciErr != SC_ERR_NONE) {
+ printf("Error reading out user fuse %d\n", b);
+ return 0;
+ }
+
+ return ((val_a & 0xffff) << 16) | (val_b & 0xffff);
+}
+
+static void get_tdx_user_fuse(struct tdx_user_fuses *tdxuserfuse)
+{
+ u32 fuse_block;
+
+ fuse_block = do_get_tdx_user_fuse(TDX_USER_FUSE_BLOCK2_A,
+ TDX_USER_FUSE_BLOCK2_B);
+
+ /*
+ * Fuse block 2 acts as a backup area, if this reads 0 we want to
+ * use fuse block 1
+ */
+ if (fuse_block == 0)
+ fuse_block = do_get_tdx_user_fuse(TDX_USER_FUSE_BLOCK1_A,
+ TDX_USER_FUSE_BLOCK1_B);
+
+ tdxuserfuse->pid4 = (fuse_block >> 18) & GENMASK(13, 0);
+ tdxuserfuse->vers = (fuse_block >> 4) & GENMASK(13, 0);
+ tdxuserfuse->ramid = fuse_block & GENMASK(3, 0);
+}
+
void board_mem_get_layout(u64 *phys_sdram_1_start,
u64 *phys_sdram_1_size,
u64 *phys_sdram_2_start,
u64 *phys_sdram_2_size)
{
u32 is_quadplus = 0, val = 0;
+ struct tdx_user_fuses tdxramfuses;
sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
if (scierr == SC_ERR_NONE) {
@@ -51,14 +105,33 @@
is_quadplus = ((val >> 4) & 0x3) != 0x0;
}
+ get_tdx_user_fuse(&tdxramfuses);
+
*phys_sdram_1_start = PHYS_SDRAM_1;
*phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
*phys_sdram_2_start = PHYS_SDRAM_2;
- if (is_quadplus)
- /* Our QP based SKUs only have 2 GB RAM (PHYS_SDRAM_1_SIZE) */
+
+ switch (tdxramfuses.ramid) {
+ case 1:
+ *phys_sdram_2_size = SZ_2G;
+ break;
+ case 2:
*phys_sdram_2_size = 0x0UL;
- else
- *phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
+ break;
+ case 3:
+ *phys_sdram_2_size = SZ_2G;
+ break;
+ case 4:
+ *phys_sdram_2_size = SZ_4G + SZ_2G;
+ break;
+ default:
+ if (is_quadplus)
+ /* Our QP based SKUs only have 2 GB RAM (PHYS_SDRAM_1_SIZE) */
+ *phys_sdram_2_size = 0x0UL;
+ else
+ *phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
+ break;
+ }
}
int board_early_init_f(void)
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 9c87289..6c8cf45 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -144,6 +144,7 @@
[64] = "Verdin iMX8M Plus Quad 2GB Wi-Fi / BT IT",
[65] = "Verdin iMX8M Plus QuadLite 1GB IT",
[66] = "Verdin iMX8M Plus Quad 8GB Wi-Fi / BT",
+ [67] = "Apalis iMX8 QuadMax 8GB Wi-Fi / BT IT",
};
const char * const toradex_carrier_boards[] = {
@@ -359,6 +360,7 @@
char *soc;
char it = 'n';
char wb = 'n';
+ char mem8g = 'n';
int len = 0;
/* Unknown module by default */
@@ -377,6 +379,14 @@
sprintf(message, "Does the module have Wi-Fi / Bluetooth? [y/N] ");
len = cli_readline(message);
wb = console_buffer[0];
+
+#if defined(CONFIG_TARGET_APALIS_IMX8)
+ if ((wb == 'y' || wb == 'Y') && (it == 'y' || it == 'Y')) {
+ sprintf(message, "Does your module have 8GB of RAM? [y/N] ");
+ len = cli_readline(message);
+ mem8g = console_buffer[0];
+ }
+#endif
#endif
soc = env_get("soc");
@@ -430,8 +440,12 @@
tdx_hw_tag.prodid = COLIBRI_IMX7S;
else if (is_cpu_type(MXC_CPU_IMX8QM)) {
if (it == 'y' || it == 'Y') {
- if (wb == 'y' || wb == 'Y')
- tdx_hw_tag.prodid = APALIS_IMX8QM_WIFI_BT_IT;
+ if (wb == 'y' || wb == 'Y') {
+ if (mem8g == 'y' || mem8g == 'Y')
+ tdx_hw_tag.prodid = APALIS_IMX8QM_8GB_WIFI_BT_IT;
+ else
+ tdx_hw_tag.prodid = APALIS_IMX8QM_WIFI_BT_IT;
+ }
else
tdx_hw_tag.prodid = APALIS_IMX8QM_IT;
} else {
diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h
index ddcf699..43e662e 100644
--- a/board/toradex/common/tdx-cfg-block.h
+++ b/board/toradex/common/tdx-cfg-block.h
@@ -87,6 +87,7 @@
VERDIN_IMX8MPQ_2GB_WIFI_BT_IT,
VERDIN_IMX8MPQL_IT, /* 65 */
VERDIN_IMX8MPQ_8GB_WIFI_BT,
+ APALIS_IMX8QM_8GB_WIFI_BT_IT,
};
enum {
diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index c18c19f..52954b0 100644
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -46,6 +46,9 @@
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
@@ -70,7 +73,12 @@
CONFIG_SPL_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index 1e2e332..46634a1 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -22,6 +22,7 @@
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;"
@@ -54,6 +55,7 @@
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ADIN=y
CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index ac727b7..ffbc1d1 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -122,15 +122,15 @@
"sys_pll2_100m", "sys_pll1_800m",
"sys_pll2_500m", "clk_ext4", "audio_pll2_out" };
-static const char *imx8mp_ecspi1_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+static const char *imx8mp_ecspi1_sels[] = {"clock-osc-24m", "sys_pll2_200m", "sys_pll1_40m",
"sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
"sys_pll2_250m", "audio_pll2_out", };
-static const char *imx8mp_ecspi2_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+static const char *imx8mp_ecspi2_sels[] = {"clock-osc-24m", "sys_pll2_200m", "sys_pll1_40m",
"sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
"sys_pll2_250m", "audio_pll2_out", };
-static const char *imx8mp_ecspi3_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+static const char *imx8mp_ecspi3_sels[] = {"clock-osc-24m", "sys_pll2_200m", "sys_pll1_40m",
"sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
"sys_pll2_250m", "audio_pll2_out", };
@@ -300,7 +300,7 @@
clk_dm(IMX8MP_CLK_UART2_ROOT, imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0));
clk_dm(IMX8MP_CLK_UART3_ROOT, imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0));
clk_dm(IMX8MP_CLK_UART4_ROOT, imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0));
- clk_dm(IMX8MP_CLK_USB_ROOT, imx_clk_gate4("usb_root_clk", "osc_32k", base + 0x44d0, 0));
+ clk_dm(IMX8MP_CLK_USB_ROOT, imx_clk_gate4("usb_root_clk", "usb_core_ref", base + 0x44d0, 0));
clk_dm(IMX8MP_CLK_USB_PHY_ROOT, imx_clk_gate4("usb_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0));
clk_dm(IMX8MP_CLK_USDHC1_ROOT, imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0));
clk_dm(IMX8MP_CLK_USDHC2_ROOT, imx_clk_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0));
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index cff841a..a5bfd96 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -4,6 +4,7 @@
*
* Copyright 2019 Analog Devices Inc.
* Copyright 2022 Variscite Ltd.
+ * Copyright 2022 Josua Mayer <josua@solid-run.com>
*/
#include <common.h>
#include <phy.h>
@@ -13,6 +14,16 @@
#define PHY_ID_ADIN1300 0x0283bc30
#define ADIN1300_EXT_REG_PTR 0x10
#define ADIN1300_EXT_REG_DATA 0x11
+
+#define ADIN1300_GE_CLK_CFG_REG 0xff1f
+#define ADIN1300_GE_CLK_CFG_MASK GENMASK(5, 0)
+#define ADIN1300_GE_CLK_CFG_RCVR_125 BIT(5)
+#define ADIN1300_GE_CLK_CFG_FREE_125 BIT(4)
+#define ADIN1300_GE_CLK_CFG_REF_EN BIT(3)
+#define ADIN1300_GE_CLK_CFG_HRT_RCVR BIT(2)
+#define ADIN1300_GE_CLK_CFG_HRT_FREE BIT(1)
+#define ADIN1300_GE_CLK_CFG_25 BIT(0)
+
#define ADIN1300_GE_RGMII_CFG 0xff23
#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6)
#define ADIN1300_GE_RGMII_RX_SEL(x) \
@@ -100,27 +111,27 @@
* The function gets phy-mode string from property 'adi,phy-mode-override'
* and return its index in phy_interface_strings table, or -1 in error case.
*/
-int adin_get_phy_mode_override(struct phy_device *phydev)
+phy_interface_t adin_get_phy_mode_override(struct phy_device *phydev)
{
ofnode node = phy_get_ofnode(phydev);
const char *phy_mode_override;
const char *prop_phy_mode_override = "adi,phy-mode-override";
- int override_interface;
+ int i;
phy_mode_override = ofnode_read_string(node, prop_phy_mode_override);
if (!phy_mode_override)
- return -ENODEV;
+ return PHY_INTERFACE_MODE_NA;
debug("%s: %s = '%s'\n",
__func__, prop_phy_mode_override, phy_mode_override);
- override_interface = phy_get_interface_by_name(phy_mode_override);
+ for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++)
+ if (!strcmp(phy_mode_override, phy_interface_strings[i]))
+ return (phy_interface_t) i;
- if (override_interface < 0)
- printf("%s: %s = '%s' is not valid\n",
- __func__, prop_phy_mode_override, phy_mode_override);
+ printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode_override);
- return override_interface;
+ return PHY_INTERFACE_MODE_NA;
}
static u16 adin_ext_read(struct phy_device *phydev, const u32 regnum)
@@ -144,14 +155,41 @@
return phy_write(phydev, MDIO_DEVAD_NONE, ADIN1300_EXT_REG_DATA, val);
}
+static int adin_config_clk_out(struct phy_device *phydev)
+{
+ ofnode node = phy_get_ofnode(phydev);
+ const char *val = NULL;
+ u8 sel = 0;
+
+ val = ofnode_read_string(node, "adi,phy-output-clock");
+ if (!val) {
+ /* property not present, do not enable GP_CLK pin */
+ } else if (strcmp(val, "25mhz-reference") == 0) {
+ sel |= ADIN1300_GE_CLK_CFG_25;
+ } else if (strcmp(val, "125mhz-free-running") == 0) {
+ sel |= ADIN1300_GE_CLK_CFG_FREE_125;
+ } else if (strcmp(val, "adaptive-free-running") == 0) {
+ sel |= ADIN1300_GE_CLK_CFG_HRT_FREE;
+ } else {
+ pr_err("%s: invalid adi,phy-output-clock\n", __func__);
+ return -EINVAL;
+ }
+
+ if (ofnode_read_bool(node, "adi,phy-output-reference-clock"))
+ sel |= ADIN1300_GE_CLK_CFG_REF_EN;
+
+ return adin_ext_write(phydev, ADIN1300_GE_CLK_CFG_REG,
+ ADIN1300_GE_CLK_CFG_MASK & sel);
+}
+
static int adin_config_rgmii_mode(struct phy_device *phydev)
{
u16 reg_val;
u32 val;
- int phy_mode_override = adin_get_phy_mode_override(phydev);
+ phy_interface_t phy_mode_override = adin_get_phy_mode_override(phydev);
- if (phy_mode_override >= 0) {
- phydev->interface = (phy_interface_t) phy_mode_override;
+ if (phy_mode_override != PHY_INTERFACE_MODE_NA) {
+ phydev->interface = phy_mode_override;
}
reg_val = adin_ext_read(phydev, ADIN1300_GE_RGMII_CFG);
@@ -202,6 +240,10 @@
printf("ADIN1300 PHY detected at addr %d\n", phydev->addr);
+ ret = adin_config_clk_out(phydev);
+ if (ret < 0)
+ return ret;
+
ret = adin_config_rgmii_mode(phydev);
if (ret < 0)
diff --git a/drivers/spi/nxp_fspi.c b/drivers/spi/nxp_fspi.c
index 607c953..579d6ba 100644
--- a/drivers/spi/nxp_fspi.c
+++ b/drivers/spi/nxp_fspi.c
@@ -866,9 +866,6 @@
u32 reg;
#if CONFIG_IS_ENABLED(CLK)
- /* disable and unprepare clock to avoid glitch pass to controller */
- nxp_fspi_clk_disable_unprep(f);
-
/* the default frequency, we will change it later if necessary. */
ret = clk_set_rate(&f->clk, 20000000);
if (ret < 0)
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index cd950ad..558b781 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -58,8 +58,8 @@
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=${console},${baudrate} " \
- "console=tty1 consoleblank=0 earlycon\0" \
+ "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+ "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 470f64d..52fa2be 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -75,7 +75,7 @@
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+ "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
"consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \