board/BuR/tseries: change pinmux
some pins on the board have been rerouted to other peripherals, so we
change the pinmux to apply with hardware-design.
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index caedf00..c5dc4b7 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -17,8 +17,10 @@
#include <i2c.h>
static struct module_pin_mux uart0_pin_mux[] = {
+ /* UART0_RTS */
+ {OFFSET(uart0_rtsn), (MODE(0) | PULLUDEN)},
/* UART0_CTS */
- {OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
/* UART0_RXD */
{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
/* UART0_TXD */
@@ -26,9 +28,13 @@
{-1},
};
static struct module_pin_mux uart1_pin_mux[] = {
- /* UART0_RXD */
+ /* UART1_RTS as I2C2-SCL */
+ {OFFSET(uart1_rtsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+ /* UART1_CTS as I2C2-SDA */
+ {OFFSET(uart1_ctsn), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+ /* UART1_RXD */
{OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
- /* UART0_TXD */
+ /* UART1_TXD */
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
{-1},
};