rockchip: rk3328: add soc basic support
RK3328 is a SoC from Rockchip with quad-core Cortex-A53 CPU.
It supports two USB2.0 EHCI ports. Other interfaces are very
much like RK3288, the DRAM are 32bit width address and support
address from 0 to 4GB-16MB range.
Signed-off-by: William Zhang <william.zhang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Add empty arch/arm/mach-rockchip/rk3328/Kconfig to avoid build error:
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
new file mode 100644
index 0000000..eacf716
--- /dev/null
+++ b/include/configs/rk3328_common.h
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_RK3328_COMMON_H
+#define __CONFIG_RK3328_COMMON_H
+
+#include "rockchip-common.h"
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_BAUDRATE 1500000
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_TEXT_BASE 0x00200000
+#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
+#define CONFIG_SYS_LOAD_ADDR 0x00800800
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
+
+/* MMC/SD IP block */
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_SUPPORT_VFAT
+#define CONFIG_FS_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_FS_EXT4
+
+/* RAW SD card / eMMC locations. */
+#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+
+/* FAT sd card locations. */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+
+#ifndef CONFIG_SPL_BUILD
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "scriptaddr=0x00500000\0" \
+ "pxefile_addr_r=0x00600000\0" \
+ "fdt_addr_r=0x01f00000\0" \
+ "kernel_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x04000000\0"
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ "partitions=" PARTS_DEFAULT \
+ BOOTENV
+
+#endif
+
+#endif