image: Add boot_get_fpga() to load fpga with bootm
Add function boot_get_fpga() which find and load bitstream to
programmable logic if fpga entry is present.
Function is supported on Xilinx devices for full and partial bitstreams
in BIN and BIT format.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Remove additional blankline in image.h
diff --git a/common/bootm.c b/common/bootm.c
index c965326..4941414 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -246,6 +246,16 @@
#endif
#if IMAGE_ENABLE_FIT
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
+ /* find bitstreams */
+ ret = boot_get_fpga(argc, argv, &images, IH_ARCH_DEFAULT,
+ NULL, NULL);
+ if (ret) {
+ printf("FPGA image is corrupted or invalid\n");
+ return 1;
+ }
+#endif
+
/* find all of the loadables */
ret = boot_get_loadable(argc, argv, &images, IH_ARCH_DEFAULT,
NULL, NULL);
diff --git a/common/image-fit.c b/common/image-fit.c
index 8a0ca2a..9873957 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -422,7 +422,8 @@
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
- (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
+ (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK) ||
+ (type == IH_TYPE_FPGA)) {
ret = fit_image_get_load(fit, image_noffset, &load);
printf("%s Load Address: ", p);
if (ret)
@@ -1571,6 +1572,8 @@
return FIT_SETUP_PROP;
case IH_TYPE_LOADABLE:
return FIT_LOADABLE_PROP;
+ case IH_TYPE_FPGA:
+ return FIT_FPGA_PROP;
}
return "unknown";
@@ -1685,7 +1688,7 @@
fit_image_check_type(fit, noffset,
IH_TYPE_KERNEL_NOLOAD));
- os_ok = image_type == IH_TYPE_FLATDT ||
+ os_ok = image_type == IH_TYPE_FLATDT || IH_TYPE_FPGA ||
fit_image_check_os(fit, noffset, IH_OS_LINUX) ||
fit_image_check_os(fit, noffset, IH_OS_OPENRTOS);
diff --git a/common/image.c b/common/image.c
index ec78b7e..0be09e5 100644
--- a/common/image.c
+++ b/common/image.c
@@ -32,6 +32,8 @@
#if IMAGE_ENABLE_FIT || IMAGE_ENABLE_OF_LIBFDT
#include <libfdt.h>
#include <fdt_support.h>
+#include <fpga.h>
+#include <xilinx.h>
#endif
#include <u-boot/md5.h>
@@ -1212,6 +1214,96 @@
}
#if IMAGE_ENABLE_FIT
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
+int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
+ uint8_t arch, const ulong *ld_start, ulong * const ld_len)
+{
+ ulong tmp_img_addr, img_data, img_len;
+ void *buf;
+ int conf_noffset;
+ int fit_img_result;
+ char *uname, *name;
+ int err;
+ int devnum = 0; /* TODO support multi fpga platforms */
+ const fpga_desc * const desc = fpga_get_desc(devnum);
+ xilinx_desc *desc_xilinx = desc->devdesc;
+
+ /* Check to see if the images struct has a FIT configuration */
+ if (!genimg_has_config(images)) {
+ debug("## FIT configuration was not specified\n");
+ return 0;
+ }
+
+ /*
+ * Obtain the os FIT header from the images struct
+ * copy from dataflash if needed
+ */
+ tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
+ tmp_img_addr = genimg_get_image(tmp_img_addr);
+ buf = map_sysmem(tmp_img_addr, 0);
+ /*
+ * Check image type. For FIT images get FIT node
+ * and attempt to locate a generic binary.
+ */
+ switch (genimg_get_format(buf)) {
+ case IMAGE_FORMAT_FIT:
+ conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
+
+ err = fdt_get_string_index(buf, conf_noffset, FIT_FPGA_PROP, 0,
+ (const char **)&uname);
+ if (err < 0) {
+ debug("## FPGA image is not specified\n");
+ return 0;
+ }
+ fit_img_result = fit_image_load(images,
+ tmp_img_addr,
+ (const char **)&uname,
+ &(images->fit_uname_cfg),
+ arch,
+ IH_TYPE_FPGA,
+ BOOTSTAGE_ID_FPGA_INIT,
+ FIT_LOAD_OPTIONAL_NON_ZERO,
+ &img_data, &img_len);
+
+ debug("FPGA image (%s) loaded to 0x%lx/size 0x%lx\n",
+ uname, img_data, img_len);
+
+ if (fit_img_result < 0) {
+ /* Something went wrong! */
+ return fit_img_result;
+ }
+
+ if (img_len >= desc_xilinx->size) {
+ name = "full";
+ err = fpga_loadbitstream(devnum, (char *)img_data,
+ img_len, BIT_FULL);
+ if (err)
+ err = fpga_load(devnum, (const void *)img_data,
+ img_len, BIT_FULL);
+ } else {
+ name = "partial";
+ err = fpga_loadbitstream(devnum, (char *)img_data,
+ img_len, BIT_PARTIAL);
+ if (err)
+ err = fpga_load(devnum, (const void *)img_data,
+ img_len, BIT_PARTIAL);
+ }
+
+ printf(" Programming %s bitstream... ", name);
+ if (err)
+ printf("failed\n");
+ else
+ printf("OK\n");
+ break;
+ default:
+ printf("The given image format is not supported (corrupt?)\n");
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
diff --git a/include/bootstage.h b/include/bootstage.h
index 9765360..0880a68 100644
--- a/include/bootstage.h
+++ b/include/bootstage.h
@@ -198,6 +198,7 @@
BOOTSTAGE_ID_ACCUM_SCSI,
BOOTSTAGE_ID_ACCUM_SPI,
BOOTSTAGE_ID_ACCUM_DECOMP,
+ BOOTSTAGE_ID_FPGA_INIT,
/* a few spare for the user, from here */
BOOTSTAGE_ID_USER,
diff --git a/include/image.h b/include/image.h
index e2a90ca..a8f6bd1 100644
--- a/include/image.h
+++ b/include/image.h
@@ -496,6 +496,8 @@
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);
+int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
+ uint8_t arch, const ulong *ld_start, ulong * const ld_len);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);