diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
new file mode 100644
index 0000000..046dfc0
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PH2";
+			};
+
+			led_pins_pcduino3: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			key_pins_pcduino3: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3>;
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_ahci_5v: ahci-5v {
+		gpio = <&pio 7 2 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
new file mode 100644
index 0000000..4011628
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -0,0 +1,988 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		pll8: clk@01c20040 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20040 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll8";
+		};
+
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+				"ahb_nand", "ahb_sdram", "ahb_ace",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_spi3", "ahb_sata",
+				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
+				"ahb_mali";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_pio", "apb0_ir0", "apb0_ir1",
+				"apb0_iis2", "apb0_keypad";
+		};
+
+		apb1_mux: apb1_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1_mux";
+		};
+
+		apb1: apb1@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb1_mux>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_i2c3", "apb1_can",
+				"apb1_scr", "apb1_ps20", "apb1_ps21",
+				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3", "apb1_uart4",
+				"apb1_uart5", "apb1_uart6", "apb1_uart7";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc3";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		pata_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "pata";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		ir1_clk: clk@01c200b4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir1";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
+		spi3_clk: clk@01c200d4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200d4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi3";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@3 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		/*
+		 * Dummy clock used by output clocks
+		 */
+		osc24M_32k: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <750>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc24M_32k";
+		};
+
+		clk_out_a: clk@01c201f0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-out-clk";
+			reg = <0x01c201f0 0x4>;
+			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+			clock-output-names = "clk_out_a";
+		};
+
+		clk_out_b: clk@01c201f4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-out-clk";
+			reg = <0x01c201f4 0x4>;
+			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+			clock-output-names = "clk_out_b";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nmi_intc: interrupt-controller@01c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <0 0 4>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <0 10 4>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <0 11 4>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <0 55 4>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>, <&mmc0_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 32 4>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>, <&mmc1_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 33 4>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>, <&mmc2_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 34 4>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>, <&mmc3_clk>;
+			clock-names = "ahb", "mmc";
+			interrupts = <0 35 4>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <0 39 4>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <0 64 4>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <0 56 4>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <0 40 4>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <0 65 4>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <0 50 4>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 28 4>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "uart2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			clk_out_a_pins_a: clk_out_a@0 {
+				allwinner,pins = "PI12";
+				allwinner,function = "clk_out_a";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			clk_out_b_pins_a: clk_out_b@0 {
+				allwinner,pins = "PI13";
+				allwinner,function = "clk_out_b";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA10",
+						"PA11", "PA12", "PA13",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <3>;
+				allwinner,pull = <0>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			mmc3_pins_a: mmc3@0 {
+				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+				allwinner,function = "mmc3";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
+			ir0_pins_a: ir0@0 {
+				    allwinner,pins = "PB3","PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				    allwinner,pins = "PB22","PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <0 22 4>,
+				     <0 23 4>,
+				     <0 24 4>,
+				     <0 25 4>,
+				     <0 67 4>,
+				     <0 68 4>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@01c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <0 24 4>;
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 5 4>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 6 4>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <0 29 4>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 1 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 2 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 3 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 4 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 17 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <0 18 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <0 19 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <0 20 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 7 4>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 8 4>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 9 4>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 88 4>;
+			clocks = <&apb1_gates 3>;
+			clock-frequency = <100000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@01c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <0 89 4>;
+			clocks = <&apb1_gates 15>;
+			clock-frequency = <100000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@01c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <0 85 4>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hstimer@01c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
+			clocks = <&ahb_gates 28>;
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+	};
+};
diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi
new file mode 100644
index 0000000..3d021ef
--- /dev/null
+++ b/arch/arm/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,89 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PB8";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH6";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ahci_pwr_pin_a>;
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 8 0>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 6 0>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_a>;
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 3 0>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};