rockchip: rk3399: move sysreset-gpio logic to TPL
If TPL_GPIO and TPL_PINCTRL_ROCKCHIP are enabled and a sysreset-gpio is
provided in the TPL Device Tree, this will trigger a system reset
similar to what's currently been done in SPL whenever the RK3399 "warm"
boots. Because there's currently only one user of sysreset-gpio logic,
and TPL is enabled on that board, so let's migrate the logic and that
board to do it in TPL.
There are three reasons for moving this earlier:
- faster boot time as we don't need to reach SPL to be able to reset the
system on a condition we know is already met in TPL,
- have less code to be impacted by the issue this system reset works
around (that is, "unclean" SoC registers after a reboot),
- less confusion around the reason for restarting. Indeed when done from
SPL, the following log can be observed:
"""
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
Channel 0: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45 +0100)
Trying to boot from MMC2
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
"""
possibly hinting at an issue within the SPL when loading the fitImage
from MMC2 instead of the normal course of events (a system reset).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index 7b6a822..0c28241 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -169,7 +169,8 @@
}
#endif
-#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
+#if defined(CONFIG_TPL_BUILD)
static void rk3399_force_power_on_reset(void)
{
const struct rockchip_cru *cru = rockchip_get_cru();
@@ -195,9 +196,9 @@
if (cru->glb_rst_st == 0)
return;
- if (!IS_ENABLED(CONFIG_SPL_GPIO)) {
+ if (!IS_ENABLED(CONFIG_TPL_GPIO)) {
debug("%s: trying to force a power-on reset but no GPIO "
- "support in SPL!\n", __func__);
+ "support in TPL!\n", __func__);
return;
}
@@ -218,6 +219,11 @@
dm_gpio_set_value(&sysreset_gpio, 1);
}
+void tpl_board_init(void)
+{
+ rk3399_force_power_on_reset();
+}
+# else
void __weak led_setup(void)
{
}
@@ -225,7 +231,6 @@
void spl_board_init(void)
{
led_setup();
-
- rk3399_force_power_on_reset();
}
#endif
+#endif
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 67c0ee7..7a180b1 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -30,6 +30,7 @@
CONFIG_SPL_POWER=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_TPL=y
+CONFIG_TPL_GPIO=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
@@ -78,6 +79,8 @@
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_TPL_PINCTRL=y
+CONFIG_TPL_PINCTRL_FULL=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_PMIC_RK8XX=y