Blackfin: add port muxing for BF51x SPI
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 99caa96..b147ce7 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -3,7 +3,7 @@
*
* Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -163,7 +163,9 @@
#define TIMEOUT 5000 /* timeout of 5 seconds */
-/* BF54x support */
+/* If part has multiple SPI flashes, assume SPI0 as that is
+ * the one we can boot off of ...
+ */
#ifndef pSPI_CTL
# define pSPI_CTL pSPI0_CTL
# define pSPI_BAUD pSPI0_BAUD
@@ -171,19 +173,16 @@
# define pSPI_RDBR pSPI0_RDBR
# define pSPI_STAT pSPI0_STAT
# define pSPI_TDBR pSPI0_TDBR
-# define SPI0_SCK 0x0001
-# define SPI0_MOSI 0x0004
-# define SPI0_MISO 0x0002
-# define SPI0_SEL1 0x0010
#endif
/* Default to the SPI SSEL that we boot off of:
* BF54x, BF537, (everything new?): SSEL1
- * BF533, BF561: SSEL2
+ * BF51x, BF533, BF561: SSEL2
*/
#ifndef CONFIG_SPI_FLASH_SSEL
# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
+ defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
+ defined(__ADSPBF51x__)
# define CONFIG_SPI_FLASH_SSEL 2
# else
# define CONFIG_SPI_FLASH_SSEL 1
@@ -200,12 +199,15 @@
/* enable SPI pins: SSEL, MOSI, MISO, SCK */
#ifdef __ADSPBF54x__
- *pPORTE_FER |= (SPI0_SCK | SPI0_MOSI | SPI0_MISO | SPI0_SEL1);
+ *pPORTE_FER |= (PE0 | PE1 | PE2 | PE4);
#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
*pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
#elif defined(__ADSPBF52x__)
bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3);
bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4);
+#elif defined(__ADSPBF51x__)
+ bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_1);
+ bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG12 | PG13 | PG14 | PG15);
#endif
/* initate communication upon write of TDBR */