arm: dts: ls1028a: move the iRC node and its devices into /soc
While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.
While at it fix the indentation.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index c289009..ca593c7 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -43,105 +43,6 @@
IRQ_TYPE_LEVEL_LOW)>;
};
- pcie@1f0000000 {
- compatible = "pci-host-ecam-generic";
- /* ECAM bus 0, HW has more space reserved but not populated */
- bus-range = <0x0 0x0>;
- reg = <0x01 0xf0000000 0x0 0x100000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
- enetc0: pci@0,0 {
- reg = <0x000000 0 0 0 0>;
- status = "disabled";
- };
- enetc1: pci@0,1 {
- reg = <0x000100 0 0 0 0>;
- status = "disabled";
- };
- enetc2: pci@0,2 {
- reg = <0x000200 0 0 0 0>;
- status = "disabled";
- phy-mode = "internal";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
- mdio0: pci@0,3 {
- #address-cells=<0>;
- #size-cells=<1>;
- reg = <0x000300 0 0 0 0>;
- status = "disabled";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- mscc_felix: pci@0,5 {
- reg = <0x000500 0 0 0 0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mscc_felix_port0: port@0 {
- reg = <0>;
- status = "disabled";
- };
-
- mscc_felix_port1: port@1 {
- reg = <1>;
- status = "disabled";
- };
-
- mscc_felix_port2: port@2 {
- reg = <2>;
- status = "disabled";
- };
-
- mscc_felix_port3: port@3 {
- reg = <3>;
- status = "disabled";
- };
-
- mscc_felix_port4: port@4 {
- reg = <4>;
- phy-mode = "internal";
- status = "disabled";
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-
- mscc_felix_port5: port@5 {
- reg = <5>;
- phy-mode = "internal";
- status = "disabled";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- };
- };
- };
-
- enetc6: pci@0,6 {
- reg = <0x000600 0 0 0 0>;
- status = "disabled";
- phy-mode = "internal";
- };
- };
-
soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -484,5 +385,108 @@
compatible = "arm,sp805-wdt";
reg = <0x0 0xc000000 0x0 0x1000>;
};
+
+ pcie@1f0000000 {
+ compatible = "pci-host-ecam-generic";
+ /* ECAM bus 0, HW has more space reserved but not populated */
+ bus-range = <0x0 0x0>;
+ reg = <0x01 0xf0000000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
+
+ enetc0: pci@0,0 {
+ reg = <0x000000 0 0 0 0>;
+ status = "disabled";
+ };
+
+ enetc1: pci@0,1 {
+ reg = <0x000100 0 0 0 0>;
+ status = "disabled";
+ };
+
+ enetc2: pci@0,2 {
+ reg = <0x000200 0 0 0 0>;
+ status = "disabled";
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ mdio0: pci@0,3 {
+ #address-cells=<0>;
+ #size-cells=<1>;
+ reg = <0x000300 0 0 0 0>;
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mscc_felix: pci@0,5 {
+ reg = <0x000500 0 0 0 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mscc_felix_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ mscc_felix_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ mscc_felix_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ mscc_felix_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ mscc_felix_port4: port@4 {
+ reg = <4>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ mscc_felix_port5: port@5 {
+ reg = <5>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ };
+ };
+ };
+
+ enetc6: pci@0,6 {
+ reg = <0x000600 0 0 0 0>;
+ status = "disabled";
+ phy-mode = "internal";
+ };
+ };
};
};