mmc: sdhci: Clear SDHCI_CLOCK_CONTROL before configuring the new value
This patch completely clears the SDHCI_CLOCK_CONTROL register before the
new value is configured instead of just clearing the 2 bits
SDHCI_CLOCK_CARD_EN and SDHCI_CLOCK_INT_EN. Without this change, some
clock configurations will lead to the "Internal clock never stabilised."
error message on the Xenon SDHCI controller used on the Marvell Armada
3700 and 7k/8k ARM64 SoCs.
The Linux SDHCI core driver also writes 0 to this register before
the new value is configured. So this patch simplifies the driver a bit
and brings the U-Boot driver more in-line with the Linux one.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 84e0581..9902dbd 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -295,7 +295,7 @@
static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
{
struct sdhci_host *host = mmc->priv;
- unsigned int div, clk = 0, timeout, reg;
+ unsigned int div, clk = 0, timeout;
/* Wait max 20 ms */
timeout = 200;
@@ -311,9 +311,7 @@
udelay(100);
}
- reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
- reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
- sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return 0;