| /* |
| * Copyright 2015 Freescale Semiconductor |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ |
| #define _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ |
| |
| #ifdef CONFIG_SYS_FSL_CCSR_GUR_LE |
| #define gur_in32(a) in_le32(a) |
| #define gur_out32(a, v) out_le32(a, v) |
| #elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE) |
| #define gur_in32(a) in_be32(a) |
| #define gur_out32(a, v) out_be32(a, v) |
| #endif |
| |
| #ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE |
| #define scfg_in32(a) in_le32(a) |
| #define scfg_out32(a, v) out_le32(a, v) |
| #elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE) |
| #define scfg_in32(a) in_be32(a) |
| #define scfg_out32(a, v) out_be32(a, v) |
| #endif |
| |
| #ifdef CONFIG_SYS_FSL_PEX_LUT_LE |
| #define pex_lut_in32(a) in_le32(a) |
| #define pex_lut_out32(a, v) out_le32(a, v) |
| #elif defined(CONFIG_SYS_FSL_PEX_LUT_BE) |
| #define pex_lut_in32(a) in_be32(a) |
| #define pex_lut_out32(a, v) out_be32(a, v) |
| #endif |
| #ifndef __ASSEMBLY__ |
| struct cpu_type { |
| char name[15]; |
| u32 soc_ver; |
| u32 num_cores; |
| }; |
| |
| #define CPU_TYPE_ENTRY(n, v, nc) \ |
| { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)} |
| #endif |
| #define SVR_WO_E 0xFFFFFE |
| #define SVR_LS1012A 0x870400 |
| #define SVR_LS1043A 0x879200 |
| #define SVR_LS1023A 0x879208 |
| #define SVR_LS1046A 0x870700 |
| #define SVR_LS1026A 0x870708 |
| #define SVR_LS2045A 0x870120 |
| #define SVR_LS2080A 0x870110 |
| #define SVR_LS2085A 0x870100 |
| #define SVR_LS2040A 0x870130 |
| #define SVR_LS2088A 0x870900 |
| #define SVR_LS2084A 0x870910 |
| #define SVR_LS2048A 0x870920 |
| #define SVR_LS2044A 0x870930 |
| |
| #define SVR_DEV_LS2080A 0x8701 |
| |
| #define SVR_MAJ(svr) (((svr) >> 4) & 0xf) |
| #define SVR_MIN(svr) (((svr) >> 0) & 0xf) |
| #define SVR_REV(svr) (((svr) >> 0) & 0xff) |
| #define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E) |
| #define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1)) |
| #define IS_SVR_REV(svr, maj, min) \ |
| ((SVR_MAJ(svr) == (maj)) && (SVR_MIN(svr) == (min))) |
| |
| /* ahci port register default value */ |
| #define AHCI_PORT_PHY_1_CFG 0xa003fffe |
| #define AHCI_PORT_TRANS_CFG 0x08000029 |
| #define AHCI_PORT_AXICC_CFG 0x3fffffff |
| |
| #ifndef __ASSEMBLY__ |
| /* AHCI (sata) register map */ |
| struct ccsr_ahci { |
| u32 res1[0xa4/4]; /* 0x0 - 0xa4 */ |
| u32 pcfg; /* port config */ |
| u32 ppcfg; /* port phy1 config */ |
| u32 pp2c; /* port phy2 config */ |
| u32 pp3c; /* port phy3 config */ |
| u32 pp4c; /* port phy4 config */ |
| u32 pp5c; /* port phy5 config */ |
| u32 axicc; /* AXI cache control */ |
| u32 paxic; /* port AXI config */ |
| u32 axipc; /* AXI PROT control */ |
| u32 ptc; /* port Trans Config */ |
| u32 pts; /* port Trans Status */ |
| u32 plc; /* port link config */ |
| u32 plc1; /* port link config1 */ |
| u32 plc2; /* port link config2 */ |
| u32 pls; /* port link status */ |
| u32 pls1; /* port link status1 */ |
| u32 pcmdc; /* port CMD config */ |
| u32 ppcs; /* port phy control status */ |
| u32 pberr; /* port 0/1 BIST error */ |
| u32 cmds; /* port 0/1 CMD status error */ |
| }; |
| |
| #ifdef CONFIG_FSL_LSCH3 |
| void fsl_lsch3_early_init_f(void); |
| #elif defined(CONFIG_FSL_LSCH2) |
| void fsl_lsch2_early_init_f(void); |
| int setup_chip_volt(void); |
| /* Setup core vdd in unit mV */ |
| int board_setup_core_volt(u32 vdd); |
| #endif |
| |
| void cpu_name(char *name); |
| #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 |
| void erratum_a009635(void); |
| #endif |
| |
| #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 |
| void erratum_a010315(void); |
| #endif |
| |
| bool soc_has_dp_ddr(void); |
| bool soc_has_aiop(void); |
| #endif |
| #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */ |