Merge branch 'master' of git://git.denx.de/u-boot-socfpga
diff --git a/MAINTAINERS b/MAINTAINERS
index b387207..9d447ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -126,8 +126,8 @@
F: arch/arm/include/asm/arch-s3c24x0/
ARM STM SPEAR
-M: Vipin Kumar <vipin.kumar@st.com>
-S: Maintained
+#M: Vipin Kumar <vipin.kumar@st.com>
+S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-stm.git
F: arch/arm/cpu/arm926ejs/spear/
F: arch/arm/include/asm/arch-spear/
@@ -309,8 +309,8 @@
F: arch/powerpc/cpu/mpc82*/
POWERPC MPC83XX
-M: Kim Phillips <kim.phillips@freescale.com>
-S: Maintained
+#M: Kim Phillips <kim.phillips@freescale.com>
+S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-mpc83xx.git
F: arch/powerpc/cpu/mpc83xx/
F: arch/powerpc/include/asm/arch-mpc83xx/
@@ -376,8 +376,8 @@
F: arch/sh/
SPARC
-M: Francois Retief <fgretief@spaceteq.co.za>
-S: Maintained
+#M: Francois Retief <fgretief@spaceteq.co.za>
+S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-sparc.git
F: arch/sparc/
@@ -390,8 +390,8 @@
F: include/spi*
TQ GROUP
-M: Martin Krause <martin.krause@tq-systems.de>
-S: Maintained
+#M: Martin Krause <martin.krause@tq-systems.de>
+S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-tq-group.git
UBI
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index 79ae883..b1b0c71 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -9,6 +9,43 @@
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/ls102xa_soc.h>
+#include <asm/arch/ls102xa_stream_id.h>
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+ SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
+struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
unsigned int get_soc_major_rev(void)
{
@@ -88,3 +125,14 @@
return 0;
}
+
+int ls102xa_smmu_stream_id_init(void)
+{
+ ls1021x_config_caam_stream_id(sec_liodn_tbl,
+ ARRAY_SIZE(sec_liodn_tbl));
+
+ ls102xa_config_smmu_stream_id(dev_stream_id,
+ ARRAY_SIZE(dev_stream_id));
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 4e4861d..9c18fd7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -14,6 +14,9 @@
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+#include <fsl_fman.h>
+#endif
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
@@ -204,4 +207,8 @@
#ifdef CONFIG_FSL_LSCH3
fdt_fixup_smmu(blob);
#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_firmware(blob);
+#endif
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 7ff0148..213ce3a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -213,6 +213,24 @@
#endif
}
+/*
+ * This erratum requires setting a value to eddrtqcr1 to optimal
+ * the DDR performance. The eddrtqcr1 register is in SCFG space
+ * of LS1043A and the offset is 0x157_020c.
+ */
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \
+ && defined(CONFIG_SYS_FSL_ERRATUM_A008514)
+#error A009660 and A008514 can not be both enabled.
+#endif
+
+static void erratum_a009660(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009660
+ u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c;
+ out_be32(eddrtqcr1, 0x63b20042);
+#endif
+}
+
void fsl_lsch2_early_init_f(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -238,6 +256,7 @@
/* Erratum */
erratum_a009929();
+ erratum_a009660();
}
#endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b574284..578038b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -96,7 +96,8 @@
dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
-dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
+dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
+ ls1021a-qds-lpuart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb
diff --git a/arch/arm/dts/ls1021a-qds-duart.dts b/arch/arm/dts/ls1021a-qds-duart.dts
new file mode 100644
index 0000000..bc56867
--- /dev/null
+++ b/arch/arm/dts/ls1021a-qds-duart.dts
@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart0;
+ };
+};
diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts b/arch/arm/dts/ls1021a-qds-lpuart.dts
new file mode 100644
index 0000000..1d16ffd
--- /dev/null
+++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
@@ -0,0 +1,16 @@
+/*
+ * Freescale ls1021a QDS board common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ls1021a-qds.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &lpuart0;
+ };
+};
diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dtsi
similarity index 97%
rename from arch/arm/dts/ls1021a-qds.dts
rename to arch/arm/dts/ls1021a-qds.dtsi
index e634292..ca9e835 100644
--- a/arch/arm/dts/ls1021a-qds.dts
+++ b/arch/arm/dts/ls1021a-qds.dtsi
@@ -1,12 +1,11 @@
/*
- * Freescale ls1021a QDS board device tree source
+ * Freescale ls1021a QDS board common device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
-/dts-v1/;
#include "ls1021a.dtsi"
/ {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index ff3b1be..0ef7c9d 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -177,6 +177,8 @@
#define CONFIG_SYS_FSL_ERRATUM_A009663
#define CONFIG_SYS_FSL_ERRATUM_A009929
+#define CONFIG_SYS_FSL_ERRATUM_A009942
+#define CONFIG_SYS_FSL_ERRATUM_A009660
#else
#error SoC not defined
#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
index f10cb91..a354684 100644
--- a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
@@ -9,4 +9,6 @@
unsigned int get_soc_major_rev(void);
int arch_soc_init(void);
+int ls102xa_smmu_stream_id_init(void);
+
#endif /* __FSL_LS102XA_SOC_H */
diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h
index 4094a75..1af73c5 100644
--- a/arch/arm/include/asm/arch-stm32f1/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f1/stm32.h
@@ -24,6 +24,14 @@
#define STM32_BUS_MASK 0xFFFF0000
+#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800)
+#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00)
+#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000)
+#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400)
+#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800)
+#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00)
+#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000)
+
/*
* Register maps
*/
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h
index 6b64d03..7d6331b 100644
--- a/arch/arm/include/asm/arch-stm32f4/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f4/stm32.h
@@ -23,6 +23,16 @@
#define STM32_BUS_MASK 0xFFFF0000
+#define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000)
+#define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400)
+#define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800)
+#define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00)
+#define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000)
+#define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400)
+#define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800)
+#define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00)
+#define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000)
+
/*
* Register maps
*/
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
index a1af25c..38adc4e 100644
--- a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
+++ b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
@@ -22,6 +22,17 @@
enum periph_clock {
USART1_CLOCK_CFG = 0,
USART2_CLOCK_CFG,
+ GPIO_A_CLOCK_CFG,
+ GPIO_B_CLOCK_CFG,
+ GPIO_C_CLOCK_CFG,
+ GPIO_D_CLOCK_CFG,
+ GPIO_E_CLOCK_CFG,
+ GPIO_F_CLOCK_CFG,
+ GPIO_G_CLOCK_CFG,
+ GPIO_H_CLOCK_CFG,
+ GPIO_I_CLOCK_CFG,
+ GPIO_J_CLOCK_CFG,
+ GPIO_K_CLOCK_CFG,
};
#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-stm32f7/gpio.h b/arch/arm/include/asm/arch-stm32f7/gpio.h
new file mode 100644
index 0000000..2942cd9
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/gpio.h
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+enum stm32_gpio_port {
+ STM32_GPIO_PORT_A = 0,
+ STM32_GPIO_PORT_B,
+ STM32_GPIO_PORT_C,
+ STM32_GPIO_PORT_D,
+ STM32_GPIO_PORT_E,
+ STM32_GPIO_PORT_F,
+ STM32_GPIO_PORT_G,
+ STM32_GPIO_PORT_H,
+ STM32_GPIO_PORT_I
+};
+
+enum stm32_gpio_pin {
+ STM32_GPIO_PIN_0 = 0,
+ STM32_GPIO_PIN_1,
+ STM32_GPIO_PIN_2,
+ STM32_GPIO_PIN_3,
+ STM32_GPIO_PIN_4,
+ STM32_GPIO_PIN_5,
+ STM32_GPIO_PIN_6,
+ STM32_GPIO_PIN_7,
+ STM32_GPIO_PIN_8,
+ STM32_GPIO_PIN_9,
+ STM32_GPIO_PIN_10,
+ STM32_GPIO_PIN_11,
+ STM32_GPIO_PIN_12,
+ STM32_GPIO_PIN_13,
+ STM32_GPIO_PIN_14,
+ STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_mode {
+ STM32_GPIO_MODE_IN = 0,
+ STM32_GPIO_MODE_OUT,
+ STM32_GPIO_MODE_AF,
+ STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+ STM32_GPIO_OTYPE_PP = 0,
+ STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+ STM32_GPIO_SPEED_2M = 0,
+ STM32_GPIO_SPEED_25M,
+ STM32_GPIO_SPEED_50M,
+ STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+ STM32_GPIO_PUPD_NO = 0,
+ STM32_GPIO_PUPD_UP,
+ STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+ STM32_GPIO_AF0 = 0,
+ STM32_GPIO_AF1,
+ STM32_GPIO_AF2,
+ STM32_GPIO_AF3,
+ STM32_GPIO_AF4,
+ STM32_GPIO_AF5,
+ STM32_GPIO_AF6,
+ STM32_GPIO_AF7,
+ STM32_GPIO_AF8,
+ STM32_GPIO_AF9,
+ STM32_GPIO_AF10,
+ STM32_GPIO_AF11,
+ STM32_GPIO_AF12,
+ STM32_GPIO_AF13,
+ STM32_GPIO_AF14,
+ STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+ enum stm32_gpio_port port;
+ enum stm32_gpio_pin pin;
+};
+
+struct stm32_gpio_ctl {
+ enum stm32_gpio_mode mode;
+ enum stm32_gpio_otype otype;
+ enum stm32_gpio_speed speed;
+ enum stm32_gpio_pupd pupd;
+ enum stm32_gpio_af af;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+ return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+ return gpio % 16;
+}
+
+int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
+ const struct stm32_gpio_ctl *gpio_ctl);
+int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f7/gpt.h b/arch/arm/include/asm/arch-stm32f7/gpt.h
new file mode 100644
index 0000000..903bdf6
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/gpt.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STM32_GPT_H
+#define _STM32_GPT_H
+
+#include <asm/arch/stm32.h>
+
+struct gpt_regs {
+ u32 cr1;
+ u32 cr2;
+ u32 smcr;
+ u32 dier;
+ u32 sr;
+ u32 egr;
+ u32 ccmr1;
+ u32 ccmr2;
+ u32 ccer;
+ u32 cnt;
+ u32 psc;
+ u32 arr;
+ u32 reserved;
+ u32 ccr1;
+ u32 ccr2;
+ u32 ccr3;
+ u32 ccr4;
+ u32 reserved1;
+ u32 dcr;
+ u32 dmar;
+ u32 tim2_5_or;
+};
+
+struct gpt_regs *const gpt1_regs_ptr =
+ (struct gpt_regs *)TIM2_BASE;
+
+/* Timer control1 register */
+#define GPT_CR1_CEN 0x0001
+#define GPT_MODE_AUTO_RELOAD (1 << 7)
+
+/* Auto reload register for free running config */
+#define GPT_FREE_RUNNING 0xFFFFFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_STM32_HZ 1000
+
+/* Timer Event Generation registers */
+#define TIM_EGR_UG (1 << 0)
+
+#endif
diff --git a/arch/arm/include/asm/arch-stm32f7/rcc.h b/arch/arm/include/asm/arch-stm32f7/rcc.h
new file mode 100644
index 0000000..8bfb7b6
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/rcc.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STM32_RCC_H
+#define _STM32_RCC_H
+
+#define RCC_CR 0x00 /* clock control */
+#define RCC_PLLCFGR 0x04 /* PLL configuration */
+#define RCC_CFGR 0x08 /* clock configuration */
+#define RCC_CIR 0x0C /* clock interrupt */
+#define RCC_AHB1RSTR 0x10 /* AHB1 peripheral reset */
+#define RCC_AHB2RSTR 0x14 /* AHB2 peripheral reset */
+#define RCC_AHB3RSTR 0x18 /* AHB3 peripheral reset */
+#define RCC_APB1RSTR 0x20 /* APB1 peripheral reset */
+#define RCC_APB2RSTR 0x24 /* APB2 peripheral reset */
+#define RCC_AHB1ENR 0x30 /* AHB1 peripheral clock enable */
+#define RCC_AHB2ENR 0x34 /* AHB2 peripheral clock enable */
+#define RCC_AHB3ENR 0x38 /* AHB3 peripheral clock enable */
+#define RCC_APB1ENR 0x40 /* APB1 peripheral clock enable */
+#define RCC_APB2ENR 0x44 /* APB2 peripheral clock enable */
+#define RCC_AHB1LPENR 0x50 /* periph clk enable in low pwr mode */
+#define RCC_AHB2LPENR 0x54 /* AHB2 periph clk enable in low pwr mode */
+#define RCC_AHB3LPENR 0x58 /* AHB3 periph clk enable in low pwr mode */
+#define RCC_APB1LPENR 0x60 /* APB1 periph clk enable in low pwr mode */
+#define RCC_APB2LPENR 0x64 /* APB2 periph clk enable in low pwr mode */
+#define RCC_BDCR 0x70 /* Backup domain control */
+#define RCC_CSR 0x74 /* clock control & status */
+#define RCC_SSCGR 0x80 /* spread spectrum clock generation */
+#define RCC_PLLI2SCFGR 0x84 /* PLLI2S configuration */
+#define RCC_PLLSAICFG 0x88 /* PLLSAI configuration */
+#define RCC_DCKCFG1 0x8C /* dedicated clocks configuration register */
+#define RCC_DCKCFG2 0x90 /* dedicated clocks configuration register */
+
+#define RCC_APB1ENR_TIM2EN (1 << 0)
+#define RCC_APB1ENR_PWREN (1 << 28)
+
+/*
+ * RCC USART specific definitions
+ */
+#define RCC_ENR_USART1EN (1 << 4)
+#define RCC_ENR_USART2EN (1 << 17)
+#define RCC_ENR_USART3EN (1 << 18)
+#define RCC_ENR_USART6EN (1 << 5)
+
+/*
+ * RCC GPIO specific definitions
+ */
+#define RCC_ENR_GPIO_A_EN (1 << 0)
+#define RCC_ENR_GPIO_B_EN (1 << 1)
+#define RCC_ENR_GPIO_C_EN (1 << 2)
+#define RCC_ENR_GPIO_D_EN (1 << 3)
+#define RCC_ENR_GPIO_E_EN (1 << 4)
+#define RCC_ENR_GPIO_F_EN (1 << 5)
+#define RCC_ENR_GPIO_G_EN (1 << 6)
+#define RCC_ENR_GPIO_H_EN (1 << 7)
+#define RCC_ENR_GPIO_I_EN (1 << 8)
+#define RCC_ENR_GPIO_J_EN (1 << 9)
+#define RCC_ENR_GPIO_K_EN (1 << 10)
+
+#endif
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
new file mode 100644
index 0000000..713eb2e
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/* STM32F746 */
+#define ITCM_FLASH_BASE 0x00200000UL
+#define AXIM_FLASH_BASE 0x08000000UL
+
+#define ITCM_SRAM_BASE 0x00000000UL
+#define DTCM_SRAM_BASE 0x20000000UL
+#define SRAM1_BASE 0x20010000UL
+#define SRAM2_BASE 0x2004C000UL
+
+#define PERIPH_BASE 0x40000000UL
+
+#define APB1_PERIPH_BASE (PERIPH_BASE + 0x00000000)
+#define APB2_PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1_PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2_PERIPH_BASE (PERIPH_BASE + 0x10000000)
+#define AHB3_PERIPH_BASE (PERIPH_BASE + 0x20000000)
+
+#define TIM2_BASE (APB1_PERIPH_BASE + 0x0000)
+#define USART2_BASE (APB1_PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1_PERIPH_BASE + 0x4800)
+#define PWR_BASE (APB1_PERIPH_BASE + 0x7000)
+
+#define USART1_BASE (APB2_PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2_PERIPH_BASE + 0x1400)
+
+#define STM32_GPIOA_BASE (AHB1_PERIPH_BASE + 0x0000)
+#define STM32_GPIOB_BASE (AHB1_PERIPH_BASE + 0x0400)
+#define STM32_GPIOC_BASE (AHB1_PERIPH_BASE + 0x0800)
+#define STM32_GPIOD_BASE (AHB1_PERIPH_BASE + 0x0C00)
+#define STM32_GPIOE_BASE (AHB1_PERIPH_BASE + 0x1000)
+#define STM32_GPIOF_BASE (AHB1_PERIPH_BASE + 0x1400)
+#define STM32_GPIOG_BASE (AHB1_PERIPH_BASE + 0x1800)
+#define STM32_GPIOH_BASE (AHB1_PERIPH_BASE + 0x1C00)
+#define STM32_GPIOI_BASE (AHB1_PERIPH_BASE + 0x2000)
+#define STM32_GPIOJ_BASE (AHB1_PERIPH_BASE + 0x2400)
+#define STM32_GPIOK_BASE (AHB1_PERIPH_BASE + 0x2800)
+#define RCC_BASE (AHB1_PERIPH_BASE + 0x3800)
+#define FLASH_CNTL_BASE (AHB1_PERIPH_BASE + 0x3C00)
+
+
+#define SDRAM_FMC_BASE (AHB3_PERIPH_BASE + 0x4A0000140)
+
+enum clock {
+ CLOCK_CORE,
+ CLOCK_AHB,
+ CLOCK_APB1,
+ CLOCK_APB2
+};
+#define STM32_BUS_MASK 0xFFFF0000
+
+int configure_clocks(void);
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_defs.h b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h
new file mode 100644
index 0000000..29b98ae
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __STM32_DEFS_H__
+#define __STM32_DEFS_H__
+#include <asm/arch/stm32_periph.h>
+
+int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
new file mode 100644
index 0000000..38adc4e
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ UART1_GPIOA_9_10 = 0,
+ UART2_GPIOD_5_6,
+};
+
+enum periph_clock {
+ USART1_CLOCK_CFG = 0,
+ USART2_CLOCK_CFG,
+ GPIO_A_CLOCK_CFG,
+ GPIO_B_CLOCK_CFG,
+ GPIO_C_CLOCK_CFG,
+ GPIO_D_CLOCK_CFG,
+ GPIO_E_CLOCK_CFG,
+ GPIO_F_CLOCK_CFG,
+ GPIO_G_CLOCK_CFG,
+ GPIO_H_CLOCK_CFG,
+ GPIO_I_CLOCK_CFG,
+ GPIO_J_CLOCK_CFG,
+ GPIO_K_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index af94dff..4a14391 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -150,6 +150,17 @@
} body;
};
+#define BCM2835_MBOX_TAG_GET_BOARD_SERIAL 0x00010004
+
+struct bcm2835_mbox_tag_get_board_serial {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct __packed {
+ u64 serial;
+ } resp;
+ } body;
+};
+
#define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005
struct bcm2835_mbox_tag_get_arm_mem {
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 7dbeb04..ec6b3ff 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -6,7 +6,11 @@
config STM32F1
bool "stm32f1 family"
+config STM32F7
+ bool "stm32f7 family"
+
source "arch/arm/mach-stm32/stm32f4/Kconfig"
source "arch/arm/mach-stm32/stm32f1/Kconfig"
+source "arch/arm/mach-stm32/stm32f7/Kconfig"
endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index ea06034..ffc537f 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_STM32F1) += stm32f1/
obj-$(CONFIG_STM32F4) += stm32f4/
+obj-$(CONFIG_STM32F7) += stm32f7/
diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c
index 576d3e6..631f36a 100644
--- a/arch/arm/mach-stm32/stm32f4/clock.c
+++ b/arch/arm/mach-stm32/stm32f4/clock.c
@@ -71,6 +71,21 @@
#define FLASH_ACR_ICEN (1 << 9)
#define FLASH_ACR_DCEN (1 << 10)
+/*
+ * RCC GPIO specific definitions
+ */
+#define RCC_ENR_GPIO_A_EN (1 << 0)
+#define RCC_ENR_GPIO_B_EN (1 << 1)
+#define RCC_ENR_GPIO_C_EN (1 << 2)
+#define RCC_ENR_GPIO_D_EN (1 << 3)
+#define RCC_ENR_GPIO_E_EN (1 << 4)
+#define RCC_ENR_GPIO_F_EN (1 << 5)
+#define RCC_ENR_GPIO_G_EN (1 << 6)
+#define RCC_ENR_GPIO_H_EN (1 << 7)
+#define RCC_ENR_GPIO_I_EN (1 << 8)
+#define RCC_ENR_GPIO_J_EN (1 << 9)
+#define RCC_ENR_GPIO_K_EN (1 << 10)
+
struct pll_psc {
u8 pll_m;
u16 pll_n;
@@ -237,6 +252,39 @@
case USART1_CLOCK_CFG:
setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
break;
+ case GPIO_A_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN);
+ break;
+ case GPIO_B_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN);
+ break;
+ case GPIO_C_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN);
+ break;
+ case GPIO_D_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN);
+ break;
+ case GPIO_E_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN);
+ break;
+ case GPIO_F_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN);
+ break;
+ case GPIO_G_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN);
+ break;
+ case GPIO_H_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN);
+ break;
+ case GPIO_I_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN);
+ break;
+ case GPIO_J_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN);
+ break;
+ case GPIO_K_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN);
+ break;
default:
break;
}
diff --git a/arch/arm/mach-stm32/stm32f7/Kconfig b/arch/arm/mach-stm32/stm32f7/Kconfig
new file mode 100644
index 0000000..287e5ad
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/Kconfig
@@ -0,0 +1,8 @@
+if STM32F7
+
+config TARGET_STM32F746_DISCO
+ bool "STM32F746 Discovery board"
+
+source "board/st/stm32f746-disco/Kconfig"
+
+endif
diff --git a/arch/arm/mach-stm32/stm32f7/Makefile b/arch/arm/mach-stm32/stm32f7/Makefile
new file mode 100644
index 0000000..40f1ad3
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016
+# Vikas Manocha, <vikas.manocha@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += timer.o clock.o
diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/arch/arm/mach-stm32/stm32f7/clock.c
new file mode 100644
index 0000000..17a715b
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/clock.c
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/rcc.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case USART1_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN);
+ break;
+ case GPIO_A_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN);
+ break;
+ case GPIO_B_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_B_EN);
+ break;
+ case GPIO_C_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_C_EN);
+ break;
+ case GPIO_D_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_D_EN);
+ break;
+ case GPIO_E_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_E_EN);
+ break;
+ case GPIO_F_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_F_EN);
+ break;
+ case GPIO_G_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_G_EN);
+ break;
+ case GPIO_H_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_H_EN);
+ break;
+ case GPIO_I_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_I_EN);
+ break;
+ case GPIO_J_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_J_EN);
+ break;
+ case GPIO_K_CLOCK_CFG:
+ setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_K_EN);
+ break;
+ default:
+ break;
+ }
+}
diff --git a/arch/arm/mach-stm32/stm32f7/timer.c b/arch/arm/mach-stm32/stm32f7/timer.c
new file mode 100644
index 0000000..a7dee10
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/timer.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpt.h>
+#include <asm/arch/rcc.h>
+
+#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
+#define GPT_RESOLUTION (CONFIG_SYS_HZ_CLOCK/CONFIG_STM32_HZ)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+int timer_init(void)
+{
+ /* Timer2 clock configuration */
+ setbits_le32(RCC_BASE + RCC_APB1ENR, RCC_APB1ENR_TIM2EN);
+ /* Stop the timer */
+ writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+
+ writel((CONFIG_SYS_CLK_FREQ/CONFIG_SYS_HZ_CLOCK) - 1,
+ &gpt1_regs_ptr->psc);
+
+ /* Configure timer for auto-reload */
+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
+ &gpt1_regs_ptr->cr1);
+
+ /* load value for free running */
+ writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
+
+ /* start timer */
+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+
+ writel(readl(&gpt1_regs_ptr->egr) | TIM_EGR_UG, &gpt1_regs_ptr->egr);
+
+ /* Reset the timer */
+ lastdec = READ_TIMER();
+ timestamp = 0;
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+ return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+ ulong tmo;
+ ulong start = get_timer_masked();
+ ulong tenudelcnt = CONFIG_SYS_HZ_CLOCK / (1000 * 100);
+ ulong rndoff;
+
+ rndoff = (usec % 10) ? 1 : 0;
+
+ /* tenudelcnt timer tick gives 10 microsecconds delay */
+ tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+ while ((ulong) (get_timer_masked() - start) < tmo)
+ ;
+}
+
+ulong get_timer_masked(void)
+{
+ ulong now = READ_TIMER();
+
+ if (now >= lastdec) {
+ /* normal mode */
+ timestamp += now - lastdec;
+ } else {
+ /* we have an overflow ... */
+ timestamp += now + GPT_FREE_RUNNING - lastdec;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked(unsigned long usec)
+{
+ return udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_STM32_HZ;
+}
diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
index 2033309..08a1396 100644
--- a/arch/microblaze/dts/microblaze-generic.dts
+++ b/arch/microblaze/dts/microblaze-generic.dts
@@ -4,4 +4,6 @@
#size-cells = <1>;
aliases {
} ;
+ chosen {
+ } ;
} ;
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 80bbc18..f168375 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -37,6 +37,10 @@
#ifdef CONFIG_FSL_CAAM
#include <fsl_sec.h>
#endif
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
+#include <asm/fsl_pamu.h>
+#include <fsl_secboot_err.h>
+#endif
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
#include <errno.h>
@@ -44,7 +48,7 @@
#include "../../../../drivers/block/fsl_sata.h"
#ifdef CONFIG_U_QE
-#include "../../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -432,8 +436,7 @@
ulong cpu_init_f(void)
{
extern void m8560_cpm_reset (void);
-#if defined(CONFIG_SYS_DCSRBAR_PHYS) || \
- (defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET))
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_SECURE_BOOT)
@@ -465,12 +468,6 @@
#if defined(CONFIG_SYS_CPC_REINIT_F)
disable_cpc_sram();
#endif
-
-#if defined(CONFIG_FSL_CORENET)
- /* Put PAMU in bypass mode */
- out_be32(&gur->pamubypenr, FSL_CORENET_PAMU_BYPASS);
-#endif
-
#endif
#ifdef CONFIG_CPM2
@@ -954,6 +951,11 @@
fman_enet_init();
#endif
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
+ if (pamu_init() < 0)
+ fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
+#endif
+
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 7270be1..ced216c 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -19,7 +19,9 @@
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
-#include "../../../../drivers/qe/qe.h" /* For struct qe_firmware */
+#ifdef CONFIG_SYS_DPAA_FMAN
+#include <fsl_fman.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -488,125 +490,6 @@
}
#endif
-/**
- * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree
- *
- * The binding for an Fman firmware node is documented in
- * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains
- * the actual Fman firmware binary data. The operating system is expected to
- * be able to parse the binary data to determine any attributes it needs.
- */
-#ifdef CONFIG_SYS_DPAA_FMAN
-void fdt_fixup_fman_firmware(void *blob)
-{
- int rc, fmnode, fwnode = -1;
- uint32_t phandle;
- struct qe_firmware *fmanfw;
- const struct qe_header *hdr;
- unsigned int length;
- uint32_t crc;
- const char *p;
-
- /* The first Fman we find will contain the actual firmware. */
- fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman");
- if (fmnode < 0)
- /* Exit silently if there are no Fman devices */
- return;
-
- /* If we already have a firmware node, then also exit silently. */
- if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0)
- return;
-
- /* If the environment variable is not set, then exit silently */
- p = getenv("fman_ucode");
- if (!p)
- return;
-
- fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
- if (!fmanfw)
- return;
-
- hdr = &fmanfw->header;
- length = be32_to_cpu(hdr->length);
-
- /* Verify the firmware. */
- if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
- (hdr->magic[2] != 'F')) {
- printf("Data at %p is not an Fman firmware\n", fmanfw);
- return;
- }
-
- if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
- printf("Fman firmware at %p is too large (size=%u)\n",
- fmanfw, length);
- return;
- }
-
- length -= sizeof(u32); /* Subtract the size of the CRC */
- crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length));
- if (crc != crc32_no_comp(0, (void *)fmanfw, length)) {
- printf("Fman firmware at %p has invalid CRC\n", fmanfw);
- return;
- }
-
- /* Increase the size of the fdt to make room for the node. */
- rc = fdt_increase_size(blob, fmanfw->header.length);
- if (rc < 0) {
- printf("Unable to make room for Fman firmware: %s\n",
- fdt_strerror(rc));
- return;
- }
-
- /* Create the firmware node. */
- fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware");
- if (fwnode < 0) {
- char s[64];
- fdt_get_path(blob, fmnode, s, sizeof(s));
- printf("Could not add firmware node to %s: %s\n", s,
- fdt_strerror(fwnode));
- return;
- }
- rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware");
- if (rc < 0) {
- char s[64];
- fdt_get_path(blob, fwnode, s, sizeof(s));
- printf("Could not add compatible property to node %s: %s\n", s,
- fdt_strerror(rc));
- return;
- }
- phandle = fdt_create_phandle(blob, fwnode);
- if (!phandle) {
- char s[64];
- fdt_get_path(blob, fwnode, s, sizeof(s));
- printf("Could not add phandle property to node %s: %s\n", s,
- fdt_strerror(rc));
- return;
- }
- rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length);
- if (rc < 0) {
- char s[64];
- fdt_get_path(blob, fwnode, s, sizeof(s));
- printf("Could not add firmware property to node %s: %s\n", s,
- fdt_strerror(rc));
- return;
- }
-
- /* Find all other Fman nodes and point them to the firmware node. */
- while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) {
- rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle);
- if (rc < 0) {
- char s[64];
- fdt_get_path(blob, fmnode, s, sizeof(s));
- printf("Could not add pointer property to node %s: %s\n",
- s, fdt_strerror(rc));
- return;
- }
- }
-}
-#else
-#define fdt_fixup_fman_firmware(x)
-#endif
-
#if defined(CONFIG_PPC_P4080)
static void fdt_fixup_usb(void *fdt)
{
@@ -752,7 +635,9 @@
ft_fixup_qe_snum(blob);
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
+#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index ac45e0e..c5592cd 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -24,5 +24,6 @@
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_SYS_SRIO) += srio.o
obj-$(CONFIG_FSL_LAW) += law.o
+obj-$(CONFIG_FSL_CORENET) += fsl_pamu.o pamu_table.o
endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
new file mode 100644
index 0000000..9421f1e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
@@ -0,0 +1,433 @@
+/*
+ * FSL PAMU driver
+ *
+ * Copyright 2012-2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/log2.h>
+#include <malloc.h>
+#include <asm/fsl_pamu.h>
+
+struct paace *ppaact;
+struct paace *sec;
+unsigned long fspi;
+
+static inline int __ilog2_roundup_64(uint64_t val)
+{
+ if ((val & (val - 1)) == 0)
+ return __ilog2_u64(val);
+ else
+ return __ilog2_u64(val) + 1;
+}
+
+
+static inline int count_lsb_zeroes(unsigned long val)
+{
+ return ffs(val) - 1;
+}
+
+static unsigned int map_addrspace_size_to_wse(uint64_t addrspace_size)
+{
+ /* window size is 2^(WSE+1) bytes */
+ return count_lsb_zeroes(addrspace_size >> PAMU_PAGE_SHIFT) +
+ PAMU_PAGE_SHIFT - 1;
+}
+
+static unsigned int map_subwindow_cnt_to_wce(uint32_t subwindow_cnt)
+{
+ /* window count is 2^(WCE+1) bytes */
+ return count_lsb_zeroes(subwindow_cnt) - 1;
+}
+
+static void pamu_setup_default_xfer_to_host_ppaace(struct paace *ppaace)
+{
+ set_bf(ppaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_PRIMARY);
+ set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ PAACE_M_COHERENCE_REQ);
+}
+
+static void pamu_setup_default_xfer_to_host_spaace(struct paace *spaace)
+{
+ set_bf(spaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_SECONDARY);
+ set_bf(spaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ PAACE_M_COHERENCE_REQ);
+}
+
+/** Sets up PPAACE entry for specified liodn
+ *
+ * @param[in] liodn Logical IO device number
+ * @param[in] win_addr starting address of DSA window
+ * @param[in] win-size size of DSA window
+ * @param[in] omi Operation mapping index -- if ~omi == 0 then omi
+ not defined
+ * @param[in] stashid cache stash id for associated cpu -- if ~stashid == 0
+ then stashid not defined
+ * @param[in] snoopid snoop id for hardware coherency -- if ~snoopid == 0
+ then snoopid not defined
+ * @param[in] subwin_cnt number of sub-windows
+ *
+ * @return Returns 0 upon success else error code < 0 returned
+ */
+static int pamu_config_ppaace(uint32_t liodn, uint64_t win_addr,
+ uint64_t win_size, uint32_t omi,
+ uint32_t snoopid, uint32_t stashid,
+ uint32_t subwin_cnt)
+{
+ struct paace *ppaace;
+
+ if ((win_size & (win_size - 1)) || win_size < PAMU_PAGE_SIZE)
+ return -1;
+
+ if (win_addr & (win_size - 1))
+ return -2;
+
+ if (liodn > NUM_PPAACT_ENTRIES) {
+ printf("Entries in PPACT not sufficient\n");
+ return -3;
+ }
+
+ ppaace = &ppaact[liodn];
+
+ /* window size is 2^(WSE+1) bytes */
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
+ map_addrspace_size_to_wse(win_size));
+
+ pamu_setup_default_xfer_to_host_ppaace(ppaace);
+
+ if (sizeof(phys_addr_t) > 4)
+ ppaace->wbah = (u64)win_addr >> (PAMU_PAGE_SHIFT + 20);
+ else
+ ppaace->wbah = 0;
+
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
+ (win_addr >> PAMU_PAGE_SHIFT));
+
+ /* set up operation mapping if it's configured */
+ if (omi < OME_NUMBER_ENTRIES) {
+ set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
+ ppaace->op_encode.index_ot.omi = omi;
+ } else if (~omi != 0) {
+ return -3;
+ }
+
+ /* configure stash id */
+ if (~stashid != 0)
+ set_bf(ppaace->impl_attr, PAACE_IA_CID, stashid);
+
+ /* configure snoop id */
+ if (~snoopid != 0)
+ ppaace->domain_attr.to_host.snpid = snoopid;
+
+ if (subwin_cnt) {
+ /* window count is 2^(WCE+1) bytes */
+ set_bf(ppaace->impl_attr, PAACE_IA_WCE,
+ map_subwindow_cnt_to_wce(subwin_cnt));
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0x1);
+ ppaace->fspi = fspi;
+ fspi = fspi + DEFAULT_NUM_SUBWINDOWS - 1;
+ } else {
+ set_bf(ppaace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL);
+ }
+
+ asm volatile("sync" : : : "memory");
+ /* Mark the ppace entry valid */
+ ppaace->addr_bitfields |= PAACE_V_VALID;
+ asm volatile("sync" : : : "memory");
+
+ return 0;
+}
+
+static int pamu_config_spaace(uint32_t liodn,
+ uint64_t subwin_size, uint64_t subwin_addr, uint64_t size,
+ uint32_t omi, uint32_t snoopid, uint32_t stashid)
+{
+ struct paace *paace;
+ /* Align start addr of subwin to subwindoe size */
+ uint64_t sec_addr = subwin_addr & ~(subwin_size - 1);
+ uint64_t end_addr = subwin_addr + size;
+ int size_shift = __ilog2_u64(subwin_size);
+ uint64_t win_size = 0;
+ uint32_t index, swse;
+ unsigned long fspi_idx;
+
+ /* Recalculate the size */
+ size = end_addr - sec_addr;
+
+ if (!subwin_size)
+ return -1;
+
+ if (liodn > NUM_PPAACT_ENTRIES) {
+ printf("LIODN No programmed %d > no. of PPAACT entries %d\n",
+ liodn, NUM_PPAACT_ENTRIES);
+ return -1;
+ }
+
+ while (sec_addr < end_addr) {
+ debug("sec_addr < end_addr is %llx < %llx\n", sec_addr,
+ end_addr);
+ paace = &ppaact[liodn];
+ if (!paace)
+ return -1;
+ fspi_idx = paace->fspi;
+
+ /* Calculating the win_size here as if we map in index 0,
+ paace entry woudl need to be programmed for SWSE */
+ win_size = end_addr - sec_addr;
+ win_size = 1 << __ilog2_roundup_64(win_size);
+
+ if (win_size > subwin_size)
+ win_size = subwin_size;
+ else if (win_size < PAMU_PAGE_SIZE)
+ win_size = PAMU_PAGE_SIZE;
+
+ debug("win_size is %llx\n", win_size);
+
+ swse = map_addrspace_size_to_wse(win_size);
+ index = sec_addr >> size_shift;
+
+ if (index == 0) {
+ set_bf(paace->win_bitfields, PAACE_WIN_SWSE, swse);
+ set_bf(paace->addr_bitfields, PAACE_AF_AP,
+ PAACE_AP_PERMS_ALL);
+ sec_addr += subwin_size;
+ continue;
+ }
+
+ paace = sec + fspi_idx + index - 1;
+
+ debug("SPAACT:Writing at location %p, index %d\n", paace,
+ index);
+
+ pamu_setup_default_xfer_to_host_spaace(paace);
+ set_bf(paace->addr_bitfields, SPAACE_AF_LIODN, liodn);
+ set_bf(paace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL);
+
+ /* configure snoop id */
+ if (~snoopid != 0)
+ paace->domain_attr.to_host.snpid = snoopid;
+
+ if (paace->addr_bitfields & PAACE_V_VALID) {
+ debug("Reached overlap condition\n");
+ debug("%d < %d\n", get_bf(paace->win_bitfields,
+ PAACE_WIN_SWSE), swse);
+ if (get_bf(paace->win_bitfields, PAACE_WIN_SWSE) < swse)
+ set_bf(paace->win_bitfields, PAACE_WIN_SWSE,
+ swse);
+ } else {
+ set_bf(paace->win_bitfields, PAACE_WIN_SWSE, swse);
+ }
+
+ paace->addr_bitfields |= PAACE_V_VALID;
+ sec_addr += subwin_size;
+ }
+
+ return 0;
+}
+
+int pamu_init(void)
+{
+ u32 base_addr = CONFIG_SYS_PAMU_ADDR;
+ struct ccsr_pamu *regs;
+ u32 i = 0;
+ u64 ppaact_phys, ppaact_lim, ppaact_size;
+ u64 spaact_phys, spaact_lim, spaact_size;
+
+ ppaact_size = sizeof(struct paace) * NUM_PPAACT_ENTRIES;
+ spaact_size = sizeof(struct paace) * NUM_SPAACT_ENTRIES;
+
+ /* Allocate space for Primary PAACT Table */
+ ppaact = memalign(PAMU_TABLE_ALIGNMENT, ppaact_size);
+ if (!ppaact)
+ return -1;
+ memset(ppaact, 0, ppaact_size);
+
+ /* Allocate space for Secondary PAACT Table */
+ sec = memalign(PAMU_TABLE_ALIGNMENT, spaact_size);
+ if (!sec)
+ return -1;
+ memset(sec, 0, spaact_size);
+
+ ppaact_phys = virt_to_phys((void *)ppaact);
+ ppaact_lim = ppaact_phys + ppaact_size;
+
+ spaact_phys = (uint64_t)virt_to_phys((void *)sec);
+ spaact_lim = spaact_phys + spaact_size;
+
+ /* Configure all PAMU's */
+ for (i = 0; i < CONFIG_NUM_PAMU; i++) {
+ regs = (struct ccsr_pamu *)base_addr;
+
+ out_be32(®s->ppbah, ppaact_phys >> 32);
+ out_be32(®s->ppbal, (uint32_t)ppaact_phys);
+
+ out_be32(®s->pplah, (ppaact_lim) >> 32);
+ out_be32(®s->pplal, (uint32_t)ppaact_lim);
+
+ if (sec != NULL) {
+ out_be32(®s->spbah, spaact_phys >> 32);
+ out_be32(®s->spbal, (uint32_t)spaact_phys);
+ out_be32(®s->splah, spaact_lim >> 32);
+ out_be32(®s->splal, (uint32_t)spaact_lim);
+ }
+ asm volatile("sync" : : : "memory");
+
+ base_addr += PAMU_OFFSET;
+ }
+
+ return 0;
+}
+
+void pamu_enable(void)
+{
+ u32 i = 0;
+ u32 base_addr = CONFIG_SYS_PAMU_ADDR;
+ for (i = 0; i < CONFIG_NUM_PAMU; i++) {
+ setbits_be32((void *)base_addr + PAMU_PCR_OFFSET,
+ PAMU_PCR_PE);
+ asm volatile("sync" : : : "memory");
+ base_addr += PAMU_OFFSET;
+ }
+}
+
+void pamu_reset(void)
+{
+ u32 i = 0;
+ u32 base_addr = CONFIG_SYS_PAMU_ADDR;
+ struct ccsr_pamu *regs;
+
+ for (i = 0; i < CONFIG_NUM_PAMU; i++) {
+ regs = (struct ccsr_pamu *)base_addr;
+ /* Clear PPAACT Base register */
+ out_be32(®s->ppbah, 0);
+ out_be32(®s->ppbal, 0);
+ out_be32(®s->pplah, 0);
+ out_be32(®s->pplal, 0);
+ out_be32(®s->spbah, 0);
+ out_be32(®s->spbal, 0);
+ out_be32(®s->splah, 0);
+ out_be32(®s->splal, 0);
+
+ clrbits_be32((void *)regs + PAMU_PCR_OFFSET, PAMU_PCR_PE);
+ asm volatile("sync" : : : "memory");
+ base_addr += PAMU_OFFSET;
+ }
+}
+
+void pamu_disable(void)
+{
+ u32 i = 0;
+ u32 base_addr = CONFIG_SYS_PAMU_ADDR;
+
+
+ for (i = 0; i < CONFIG_NUM_PAMU; i++) {
+ clrbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE);
+ asm volatile("sync" : : : "memory");
+ base_addr += PAMU_OFFSET;
+ }
+}
+
+
+static uint64_t find_max(uint64_t arr[], int num)
+{
+ int i = 0;
+ int max = 0;
+ for (i = 1 ; i < num; i++)
+ if (arr[max] < arr[i])
+ max = i;
+
+ return arr[max];
+}
+
+static uint64_t find_min(uint64_t arr[], int num)
+{
+ int i = 0;
+ int min = 0;
+ for (i = 1 ; i < num; i++)
+ if (arr[min] > arr[i])
+ min = i;
+
+ return arr[min];
+}
+
+static uint32_t get_win_cnt(uint64_t size)
+{
+ uint32_t win_cnt = DEFAULT_NUM_SUBWINDOWS;
+
+ while (win_cnt && (size/win_cnt) < PAMU_PAGE_SIZE)
+ win_cnt >>= 1;
+
+ return win_cnt;
+}
+
+int config_pamu(struct pamu_addr_tbl *tbl, int num_entries, uint32_t liodn)
+{
+ int i = 0;
+ int ret = 0;
+ uint32_t num_sec_windows = 0;
+ uint32_t num_windows = 0;
+ uint64_t min_addr, max_addr;
+ uint64_t size;
+ uint64_t subwin_size;
+ int sizebit;
+
+ min_addr = find_min(tbl->start_addr, num_entries);
+ max_addr = find_max(tbl->end_addr, num_entries);
+ size = max_addr - min_addr + 1;
+
+ if (!size)
+ return -1;
+
+ sizebit = __ilog2_roundup_64(size);
+ size = 1 << sizebit;
+ debug("min start_addr is %llx\n", min_addr);
+ debug("max end_addr is %llx\n", max_addr);
+ debug("size found is %llx\n", size);
+
+ if (size < PAMU_PAGE_SIZE)
+ size = PAMU_PAGE_SIZE;
+
+ while (1) {
+ min_addr = min_addr & ~(size - 1);
+ if (min_addr + size > max_addr)
+ break;
+ size <<= 1;
+ if (!size)
+ return -1;
+ }
+ debug("PAACT :Base addr is %llx\n", min_addr);
+ debug("PAACT : Size is %llx\n", size);
+ num_windows = get_win_cnt(size);
+ /* For a single window, no spaact entries are required
+ * sec_sub_window count = 0 */
+ if (num_windows > 1)
+ num_sec_windows = num_windows;
+ else
+ num_sec_windows = 0;
+
+ ret = pamu_config_ppaace(liodn, min_addr,
+ size , -1, -1, -1, num_sec_windows);
+
+ if (ret < 0)
+ return ret;
+
+ debug("configured ppace\n");
+
+ if (num_sec_windows) {
+ subwin_size = size >> count_lsb_zeroes(num_sec_windows);
+ debug("subwin_size is %llx\n", subwin_size);
+
+ for (i = 0; i < num_entries; i++) {
+ ret = pamu_config_spaace(liodn,
+ subwin_size, tbl->start_addr[i] - min_addr,
+ tbl->size[i], -1, -1, -1);
+
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return ret;
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c
new file mode 100644
index 0000000..26c5ea4
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2012-2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_pamu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries)
+{
+ int i = 0;
+ int j;
+
+ tbl->start_addr[i] =
+ (uint64_t)virt_to_phys((void *)CONFIG_SYS_SDRAM_BASE);
+ tbl->size[i] = (phys_size_t)(min(gd->ram_size, CONFIG_MAX_MEM_MAPPED));
+ tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1;
+
+ i++;
+#ifdef CONFIG_SYS_FLASH_BASE_PHYS
+ tbl->start_addr[i] =
+ (uint64_t)virt_to_phys((void *)CONFIG_SYS_FLASH_BASE_PHYS);
+ tbl->size[i] = 256 * 1024 * 1024; /* 256MB flash */
+ tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1;
+
+ i++;
+#endif
+ debug("PAMU address\t\t\tsize\n");
+ for (j = 0; j < i ; j++)
+ debug("%llx \t\t\t%llx\n", tbl->start_addr[j], tbl->size[j]);
+
+ *num_entries = i;
+}
+
+int sec_config_pamu_table(uint32_t liodn_ns, uint32_t liodn_s)
+{
+ struct pamu_addr_tbl tbl;
+ int num_entries = 0;
+ int ret = 0;
+
+ construct_pamu_addr_table(&tbl, &num_entries);
+
+ ret = config_pamu(&tbl, num_entries, liodn_ns);
+ if (ret)
+ return ret;
+
+ ret = config_pamu(&tbl, num_entries, liodn_s);
+ if (ret)
+ return ret;
+
+ return ret;
+}
diff --git a/arch/powerpc/include/asm/fsl_pamu.h b/arch/powerpc/include/asm/fsl_pamu.h
new file mode 100644
index 0000000..93a7cae
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_pamu.h
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2012-2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PAMU_H
+#define __PAMU_H
+
+#define CONFIG_NUM_PAMU 16
+#define NUM_PPAACT_ENTRIES 512
+#define NUM_SPAACT_ENTRIES 256
+
+/* PAMU_OFFSET to the next pamu space in ccsr */
+#define PAMU_OFFSET 0x1000
+
+#define PAMU_TABLE_ALIGNMENT 0x00001000
+
+#define PAMU_PAGE_SHIFT 12
+#define PAMU_PAGE_SIZE 4096U
+
+#define PAACE_M_COHERENCE_REQ 0x01
+
+#define PAACE_DA_HOST_CR 0x80
+#define PAACE_DA_HOST_CR_SHIFT 7
+
+#define PAACE_AF_PT 0x00000002
+#define PAACE_AF_PT_SHIFT 1
+
+#define PAACE_PT_PRIMARY 0x0
+#define PAACE_PT_SECONDARY 0x1
+
+#define PPAACE_AF_WBAL 0xfffff000
+#define PPAACE_AF_WBAL_SHIFT 12
+
+#define OME_NUMBER_ENTRIES 16 /* based on P4080 2.0 silicon plan */
+
+#define PAACE_IA_CID 0x00FF0000
+#define PAACE_IA_CID_SHIFT 16
+#define PAACE_IA_WCE 0x000000F0
+#define PAACE_IA_WCE_SHIFT 4
+#define PAACE_IA_ATM 0x0000000C
+#define PAACE_IA_ATM_SHIFT 2
+#define PAACE_IA_OTM 0x00000003
+#define PAACE_IA_OTM_SHIFT 0
+
+#define PAACE_OTM_NO_XLATE 0x00
+#define PAACE_OTM_IMMEDIATE 0x01
+#define PAACE_OTM_INDEXED 0x02
+#define PAACE_OTM_RESERVED 0x03
+#define PAACE_ATM_NO_XLATE 0x00
+#define PAACE_ATM_WINDOW_XLATE 0x01
+#define PAACE_ATM_PAGE_XLATE 0x02
+#define PAACE_ATM_WIN_PG_XLATE \
+ (PAACE_ATM_WINDOW_XLATE | PAACE_ATM_PAGE_XLATE)
+#define PAACE_WIN_TWBAL 0xfffff000
+#define PAACE_WIN_TWBAL_SHIFT 12
+#define PAACE_WIN_SWSE 0x00000fc0
+#define PAACE_WIN_SWSE_SHIFT 6
+
+#define PAACE_AF_AP 0x00000018
+#define PAACE_AF_AP_SHIFT 3
+#define PAACE_AF_DD 0x00000004
+#define PAACE_AF_DD_SHIFT 2
+#define PAACE_AF_PT 0x00000002
+#define PAACE_AF_PT_SHIFT 1
+#define PAACE_AF_V 0x00000001
+#define PAACE_AF_V_SHIFT 0
+#define PPAACE_AF_WSE 0x00000fc0
+#define PPAACE_AF_WSE_SHIFT 6
+#define PPAACE_AF_MW 0x00000020
+#define PPAACE_AF_MW_SHIFT 5
+
+#define PAACE_AP_PERMS_DENIED 0x0
+#define PAACE_AP_PERMS_QUERY 0x1
+#define PAACE_AP_PERMS_UPDATE 0x2
+#define PAACE_AP_PERMS_ALL 0x3
+
+#define SPAACE_AF_LIODN 0xffff0000
+#define SPAACE_AF_LIODN_SHIFT 16
+#define PAACE_V_VALID 0x1
+
+#define set_bf(v, m, x) (v = ((v) & ~(m)) | (((x) << \
+ (m##_SHIFT)) & (m)))
+#define get_bf(v, m) (((v) & (m)) >> (m##_SHIFT))
+
+#define DEFAULT_NUM_SUBWINDOWS 128
+#define PAMU_PCR_OFFSET 0xc10
+#define PAMU_PCR_PE 0x40000000
+
+struct pamu_addr_tbl {
+ phys_addr_t start_addr[10];
+ phys_addr_t end_addr[10];
+ phys_size_t size[10];
+};
+
+struct paace {
+ /* PAACE Offset 0x00 */
+ uint32_t wbah; /* only valid for Primary PAACE */
+ uint32_t addr_bitfields; /* See P/S PAACE_AF_* */
+
+ /* PAACE Offset 0x08 */
+ /* Interpretation of first 32 bits dependent on DD above */
+ union {
+ struct {
+ /* Destination ID, see PAACE_DID_* defines */
+ uint8_t did;
+ /* Partition ID */
+ uint8_t pid;
+ /* Snoop ID */
+ uint8_t snpid;
+ /* coherency_required : 1 reserved : 7 */
+ uint8_t coherency_required; /* See PAACE_DA_* */
+ } to_host;
+ struct {
+ /* Destination ID, see PAACE_DID_* defines */
+ uint8_t did;
+ uint8_t reserved1;
+ uint16_t reserved2;
+ } to_io;
+ } domain_attr;
+
+ /* Implementation attributes + window count + address & operation
+ * translation modes
+ */
+ uint32_t impl_attr; /* See PAACE_IA_* */
+
+ /* PAACE Offset 0x10 */
+ /* Translated window base address */
+ uint32_t twbah;
+ uint32_t win_bitfields; /* See PAACE_WIN_* */
+
+ /* PAACE Offset 0x18 */
+ /* first secondary paace entry */
+ uint32_t fspi; /* only valid for Primary PAACE */
+ union {
+ struct {
+ uint8_t ioea;
+ uint8_t moea;
+ uint8_t ioeb;
+ uint8_t moeb;
+ } immed_ot;
+ struct {
+ uint16_t reserved;
+ uint16_t omi;
+ } index_ot;
+ } op_encode;
+
+ /* PAACE Offset 0x20 */
+ uint32_t reserved1[2]; /* not currently implemented */
+
+ /* PAACE Offset 0x28 */
+ uint32_t reserved2[2]; /* not currently implemented */
+
+ /* PAACE Offset 0x30 */
+ uint32_t reserved3[2]; /* not currently implemented */
+
+ /* PAACE Offset 0x38 */
+ uint32_t reserved4[2]; /* not currently implemented */
+
+};
+
+int pamu_init(void);
+void pamu_enable(void);
+void pamu_disable(void);
+int config_pamu(struct pamu_addr_tbl *tbl, int num_entries, uint32_t liodn);
+int sec_config_pamu_table(uint32_t liodn_ns, uint32_t liodn_s);
+
+#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index fd8aba4..53ca6d9 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1935,7 +1935,6 @@
u8 res24[64];
u32 pblsr; /* Preboot loader status */
u32 pamubypenr; /* PAMU bypass enable */
-#define FSL_CORENET_PAMU_BYPASS 0xffff0000
u32 dmacr1; /* DMA control */
u8 res25[4];
u32 gensr1; /* General status */
@@ -2774,6 +2773,21 @@
u8 res4[0x400];
} ccsr_pme_t;
+struct ccsr_pamu {
+ u32 ppbah;
+ u32 ppbal;
+ u32 pplah;
+ u32 pplal;
+ u32 spbah;
+ u32 spbal;
+ u32 splah;
+ u32 splal;
+ u32 obah;
+ u32 obal;
+ u32 olah;
+ u32 olal;
+};
+
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
struct ccsr_raide {
u8 res0[0x543];
@@ -2854,6 +2868,7 @@
#define CONFIG_SYS_FSL_CORENET_SERDES4_OFFSET 0xED000
#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
#define CONFIG_SYS_FSL_SCFG_OFFSET 0xFC000
+#define CONFIG_SYS_FSL_PAMU_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000
#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000
#define CONFIG_SYS_MPC85xx_DMA3_OFFSET 0x102000
@@ -3067,6 +3082,8 @@
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET)
#define CONFIG_SYS_FSL_SRIO_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SRIO_OFFSET)
+#define CONFIG_SYS_PAMU_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_PAMU_OFFSET)
#define CONFIG_SYS_PCI1_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET)
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 441465c..ce4acc1 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -12,7 +12,6 @@
#include <version.h>
#include <common.h>
#include <errno.h>
-#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
@@ -640,8 +639,7 @@
};
#endif /* CONFIG_DRIVER_TI_CPSW, ... */
-#if defined(CONFIG_DRIVER_TI_CPSW)
-
+#if defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
int board_eth_init(bd_t *bis)
{
int rv = 0;
@@ -658,8 +656,6 @@
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
- (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
if (!getenv("ethaddr")) {
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT)
printf("<ethaddr> not set. trying DTB ... ");
@@ -685,10 +681,9 @@
printf("Error %d registering CPSW switch\n", rv);
return 0;
}
-#endif /* CONFIG_DRIVER_TI_CPSW, ... */
return rv;
}
-#endif /* CONFIG_DRIVER_TI_CPSW */
+#endif /* defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) */
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
diff --git a/board/compulab/cm_t43/Makefile b/board/compulab/cm_t43/Makefile
index 3993689..c749659 100644
--- a/board/compulab/cm_t43/Makefile
+++ b/board/compulab/cm_t43/Makefile
@@ -6,4 +6,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += board.o mux.o
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o mux.o
+else
+obj-y += cm_t43.o mux.o
+endif
diff --git a/board/compulab/cm_t43/board.c b/board/compulab/cm_t43/board.c
deleted file mode 100644
index 4272c45..0000000
--- a/board/compulab/cm_t43/board.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2015 Compulab, Ltd.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <spl.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/errno.h>
-#include <asm/gpio.h>
-#include <asm/emif.h>
-#include <power/pmic.h>
-#include <power/tps65218.h>
-#include "board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 };
-const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 };
-const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 };
-const struct dpll_params dpll_ddr = { 400, 23, 1, -1, 1, -1, -1 };
-
-const struct ctrl_ioregs ioregs_ddr3 = {
- .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
- .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
- .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
- .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
- .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
- .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
- .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
- .emif_sdram_config_ext = 0x0143,
-};
-
-/* EMIF DDR3 Configurations are different for production AM43X GP EVMs */
-struct emif_regs ddr3_emif_regs = {
- .sdram_config = 0x638413B2,
- .ref_ctrl = 0x00000C30,
- .sdram_tim1 = 0xEAAAD4DB,
- .sdram_tim2 = 0x266B7FDA,
- .sdram_tim3 = 0x107F8678,
- .read_idle_ctrl = 0x00050000,
- .zq_config = 0x50074BE4,
- .temp_alert_config = 0x0,
- .emif_ddr_phy_ctlr_1 = 0x0E004008,
- .emif_ddr_ext_phy_ctrl_1 = 0x08020080,
- .emif_ddr_ext_phy_ctrl_2 = 0x00000066,
- .emif_ddr_ext_phy_ctrl_3 = 0x00000091,
- .emif_ddr_ext_phy_ctrl_4 = 0x000000B9,
- .emif_ddr_ext_phy_ctrl_5 = 0x000000E6,
- .emif_rd_wr_exec_thresh = 0x80000405,
- .emif_prio_class_serv_map = 0x80000001,
- .emif_connect_id_serv_1_map = 0x80000094,
- .emif_connect_id_serv_2_map = 0x00000000,
- .emif_cos_config = 0x000FFFFF
-};
-
-const u32 ext_phy_ctrl_const_base_ddr3[] = {
- 0x00000000,
- 0x00000044,
- 0x00000044,
- 0x00000046,
- 0x00000046,
- 0x00000000,
- 0x00000059,
- 0x00000077,
- 0x00000093,
- 0x000000A8,
- 0x00000000,
- 0x00000019,
- 0x00000037,
- 0x00000053,
- 0x00000068,
- 0x00000000,
- 0x0,
- 0x0,
- 0x40000000,
- 0x08102040
-};
-
-void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
-{
- *regs = ext_phy_ctrl_const_base_ddr3;
- *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
-}
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
- return &dpll_ddr;
-}
-
-const struct dpll_params *get_dpll_mpu_params(void)
-{
- return &dpll_mpu;
-}
-
-const struct dpll_params *get_dpll_core_params(void)
-{
- return &dpll_core;
-}
-
-const struct dpll_params *get_dpll_per_params(void)
-{
- return &dpll_per;
-}
-
-static void enable_vtt_regulator(void)
-{
- u32 temp;
-
- writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL);
- writel(GPIO_SETDATAOUT(7), AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT);
- temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
- temp = temp & ~(GPIO_OE_ENABLE(7));
- writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
-}
-
-void sdram_init(void)
-{
- unsigned long ram_size;
-
- enable_vtt_regulator();
- config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0);
- ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (ram_size == 0x80000000 ||
- ram_size == 0x40000000 ||
- ram_size == 0x20000000)
- return;
-
- ddr3_emif_regs.sdram_config = 0x638453B2;
- config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0);
- ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (ram_size == 0x08000000)
- return;
-
- hang();
-}
-#endif
-
-/* setup board specific PMIC */
-int power_init_board(void)
-{
- struct pmic *p;
-
- power_tps65218_init(I2C_PMIC);
- p = pmic_get("TPS65218_PMIC");
- if (p && !pmic_probe(p))
- puts("PMIC: TPS65218\n");
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- gpmc_init();
- set_i2c_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- i2c_probe(TPS65218_CHIP_PM);
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-static void cpsw_control(int enabled)
-{
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_addr = 0,
- .phy_if = PHY_INTERFACE_MODE_RGMII,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_addr = 1,
- .phy_if = PHY_INTERFACE_MODE_RGMII,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 2,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-#define GPIO_PHY1_RST 170
-#define GPIO_PHY2_RST 168
-
-int board_phy_config(struct phy_device *phydev)
-{
- unsigned short val;
-
- /* introduce tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- val |= 0x0100;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
- if (phydev->drv->config)
- return phydev->drv->config(phydev);
-
- return 0;
-}
-
-static void board_phy_init(void)
-{
- set_mdio_pin_mux();
- writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */
- writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */
- writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */
-
- /* For revision A */
- writel(0x2000009, 0x44df2e6c);
- writel(0x38a, 0x44df2e70);
-
- mdelay(10);
-
- gpio_request(GPIO_PHY1_RST, "phy1_rst");
- gpio_request(GPIO_PHY2_RST, "phy2_rst");
- gpio_direction_output(GPIO_PHY1_RST, 0);
- gpio_direction_output(GPIO_PHY2_RST, 0);
- mdelay(2);
-
- gpio_set_value(GPIO_PHY1_RST, 1);
- gpio_set_value(GPIO_PHY2_RST, 1);
- mdelay(2);
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rv;
-
- set_rgmii_pin_mux();
- writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
- board_phy_init();
-
- rv = cpsw_register(&cpsw_data);
- if (rv < 0)
- printf("Error %d registering CPSW switch\n", rv);
-
- return rv;
-}
-#endif
diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
new file mode 100644
index 0000000..0d5da6f
--- /dev/null
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Compulab, Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/emif.h>
+#include <power/pmic.h>
+#include <power/tps65218.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* setup board specific PMIC */
+int power_init_board(void)
+{
+ struct pmic *p;
+ uchar tps_status = 0;
+
+ power_tps65218_init(I2C_PMIC);
+ p = pmic_get("TPS65218_PMIC");
+ if (p && !pmic_probe(p)) {
+ puts("PMIC: TPS65218\n");
+ /* We don't care if fseal is locked, but we do need it set */
+ tps65218_lock_fseal();
+ tps65218_reg_read(TPS65218_STATUS, &tps_status);
+ if (!(tps_status & TPS65218_FSEAL))
+ printf("WARNING: RTC not backed by battery!\n");
+ }
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gpmc_init();
+ set_i2c_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_probe(TPS65218_CHIP_PM);
+
+ return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+static void cpsw_control(int enabled)
+{
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_addr = 1,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 2,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+#define GPIO_PHY1_RST 170
+#define GPIO_PHY2_RST 168
+
+int board_phy_config(struct phy_device *phydev)
+{
+ unsigned short val;
+
+ /* introduce tx clock delay */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+ val |= 0x0100;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+
+ if (phydev->drv->config)
+ return phydev->drv->config(phydev);
+
+ return 0;
+}
+
+static void board_phy_init(void)
+{
+ set_mdio_pin_mux();
+ writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */
+ writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */
+ writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */
+
+ /* For revision A */
+ writel(0x2000009, 0x44df2e6c);
+ writel(0x38a, 0x44df2e70);
+
+ mdelay(10);
+
+ gpio_request(GPIO_PHY1_RST, "phy1_rst");
+ gpio_request(GPIO_PHY2_RST, "phy2_rst");
+ gpio_direction_output(GPIO_PHY1_RST, 0);
+ gpio_direction_output(GPIO_PHY2_RST, 0);
+ mdelay(2);
+
+ gpio_set_value(GPIO_PHY1_RST, 1);
+ gpio_set_value(GPIO_PHY2_RST, 1);
+ mdelay(2);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rv;
+
+ set_rgmii_pin_mux();
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
+ board_phy_init();
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+
+ return rv;
+}
+#endif
diff --git a/board/compulab/cm_t43/spl.c b/board/compulab/cm_t43/spl.c
new file mode 100644
index 0000000..b7d118e
--- /dev/null
+++ b/board/compulab/cm_t43/spl.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2016 Compulab, Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <i2c.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/gpio.h>
+#include <power/pmic.h>
+#include <power/tps65218.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 };
+const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 };
+const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 };
+const struct dpll_params dpll_ddr = { 400, 23, 1, -1, 1, -1, -1 };
+
+const struct ctrl_ioregs ioregs_ddr3 = {
+ .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
+ .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
+ .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
+ .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
+ .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
+ .emif_sdram_config_ext = 0x0143,
+};
+
+/* EMIF DDR3 Configurations are different for production AM43X GP EVMs */
+struct emif_regs ddr3_emif_regs = {
+ .sdram_config = 0x638413B2,
+ .ref_ctrl = 0x00000C30,
+ .sdram_tim1 = 0xEAAAD4DB,
+ .sdram_tim2 = 0x266B7FDA,
+ .sdram_tim3 = 0x107F8678,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x50074BE4,
+ .temp_alert_config = 0x0,
+ .emif_ddr_phy_ctlr_1 = 0x0E004008,
+ .emif_ddr_ext_phy_ctrl_1 = 0x08020080,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00000066,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00000091,
+ .emif_ddr_ext_phy_ctrl_4 = 0x000000B9,
+ .emif_ddr_ext_phy_ctrl_5 = 0x000000E6,
+ .emif_rd_wr_exec_thresh = 0x80000405,
+ .emif_prio_class_serv_map = 0x80000001,
+ .emif_connect_id_serv_1_map = 0x80000094,
+ .emif_connect_id_serv_2_map = 0x00000000,
+ .emif_cos_config = 0x000FFFFF
+};
+
+const u32 ext_phy_ctrl_const_base_ddr3[] = {
+ 0x00000000,
+ 0x00000044,
+ 0x00000044,
+ 0x00000046,
+ 0x00000046,
+ 0x00000000,
+ 0x00000059,
+ 0x00000077,
+ 0x00000093,
+ 0x000000A8,
+ 0x00000000,
+ 0x00000019,
+ 0x00000037,
+ 0x00000053,
+ 0x00000068,
+ 0x00000000,
+ 0x0,
+ 0x0,
+ 0x40000000,
+ 0x08102040
+};
+
+void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
+{
+ *regs = ext_phy_ctrl_const_base_ddr3;
+ *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+const struct dpll_params *get_dpll_mpu_params(void)
+{
+ return &dpll_mpu;
+}
+
+const struct dpll_params *get_dpll_core_params(void)
+{
+ return &dpll_core;
+}
+
+const struct dpll_params *get_dpll_per_params(void)
+{
+ return &dpll_per;
+}
+
+void scale_vcores(void)
+{
+ set_i2c_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ if (i2c_probe(TPS65218_CHIP_PM))
+ return;
+
+ tps65218_voltage_update(TPS65218_DCDC1, TPS65218_DCDC_VOLT_SEL_1100MV);
+ tps65218_voltage_update(TPS65218_DCDC2, TPS65218_DCDC_VOLT_SEL_1100MV);
+}
+
+void sdram_init(void)
+{
+ unsigned long ram_size;
+
+ config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0);
+ ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ if (ram_size == 0x80000000 ||
+ ram_size == 0x40000000 ||
+ ram_size == 0x20000000)
+ return;
+
+ ddr3_emif_regs.sdram_config = 0x638453B2;
+ config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0);
+ ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ if (ram_size == 0x08000000)
+ return;
+
+ hang();
+}
+
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
index a498c65..71ed15e 100644
--- a/board/freescale/common/arm_sleep.c
+++ b/board/freescale/common/arm_sleep.c
@@ -19,7 +19,7 @@
#include "sleep.h"
#ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
index e9cbd51..498d770 100644
--- a/board/freescale/common/mpc85xx_sleep.c
+++ b/board/freescale/common/mpc85xx_sleep.c
@@ -8,7 +8,7 @@
#include <asm/immap_85xx.h>
#include "sleep.h"
#ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 820d322..c37ab99 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -8,6 +8,7 @@
F: configs/ls1021aqds_ddr4_nor_lpuart_defconfig
F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig
F: configs/ls1021aqds_nor_lpuart_defconfig
-F: configs/ls1021aqds_sdcard_defconfig
+F: configs/ls1021aqds_sdcard_ifc_defconfig
+F: configs/ls1021aqds_sdcard_qspi_defconfig
F: configs/ls1021aqds_qspi_defconfig
F: configs/ls1021aqds_nand_defconfig
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 5f4ec9d..dbea0bf 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -10,7 +10,6 @@
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_stream_id.h>
#include <asm/arch/ls102xa_soc.h>
#include <asm/arch/ls102xa_devdis.h>
#include <asm/arch/ls102xa_sata.h>
@@ -28,7 +27,7 @@
#include "../common/qixis.h"
#include "ls1021aqds_qixis.h"
#ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
#endif
#define PIN_MUX_SEL_CAN 0x03
@@ -61,7 +60,7 @@
int checkboard(void)
{
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
char buf[64];
#endif
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
@@ -90,7 +89,7 @@
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
#endif
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
QIXIS_READ(id), QIXIS_READ(arch));
@@ -426,42 +425,6 @@
return 0;
}
-struct liodn_id_table sec_liodn_tbl[] = {
- SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
-};
-
-struct smmu_stream_id dev_stream_id[] = {
- { 0x100, 0x01, "ETSEC MAC1" },
- { 0x104, 0x02, "ETSEC MAC2" },
- { 0x108, 0x03, "ETSEC MAC3" },
- { 0x10c, 0x04, "PEX1" },
- { 0x110, 0x05, "PEX2" },
- { 0x114, 0x06, "qDMA" },
- { 0x118, 0x07, "SATA" },
- { 0x11c, 0x08, "USB3" },
- { 0x120, 0x09, "QE" },
- { 0x124, 0x0a, "eSDHC" },
- { 0x128, 0x0b, "eMA" },
- { 0x14c, 0x0c, "2D-ACE" },
- { 0x150, 0x0d, "USB2" },
- { 0x18c, 0x0e, "DEBUG" },
-};
-
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -481,10 +444,7 @@
config_serdes_mux();
#endif
- ls1021x_config_caam_stream_id(sec_liodn_tbl,
- ARRAY_SIZE(sec_liodn_tbl));
- ls102xa_config_smmu_stream_id(dev_stream_id,
- ARRAY_SIZE(dev_stream_id));
+ ls102xa_smmu_stream_id_init();
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
enable_layerscape_ns_access();
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
similarity index 100%
rename from board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
rename to board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
new file mode 100644
index 0000000..2bd398c
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#60000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#00000000 001b7200 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+60000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+20024800 001b7200 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 616e0bf..c69c9cb 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -10,7 +10,6 @@
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_stream_id.h>
#include <asm/arch/ls102xa_devdis.h>
#include <asm/arch/ls102xa_soc.h>
#include <asm/arch/ls102xa_sata.h>
@@ -28,7 +27,7 @@
#include <spl.h>
#include "../common/sleep.h"
#ifdef CONFIG_U_QE
-#include "../../../drivers/qe/qe.h"
+#include <fsl_qe.h>
#endif
#include <fsl_validate.h>
@@ -448,43 +447,6 @@
}
#endif
-
-struct liodn_id_table sec_liodn_tbl[] = {
- SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
- SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
- SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
- SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
-};
-
-struct smmu_stream_id dev_stream_id[] = {
- { 0x100, 0x01, "ETSEC MAC1" },
- { 0x104, 0x02, "ETSEC MAC2" },
- { 0x108, 0x03, "ETSEC MAC3" },
- { 0x10c, 0x04, "PEX1" },
- { 0x110, 0x05, "PEX2" },
- { 0x114, 0x06, "qDMA" },
- { 0x118, 0x07, "SATA" },
- { 0x11c, 0x08, "USB3" },
- { 0x120, 0x09, "QE" },
- { 0x124, 0x0a, "eSDHC" },
- { 0x128, 0x0b, "eMA" },
- { 0x14c, 0x0c, "2D-ACE" },
- { 0x150, 0x0d, "USB2" },
- { 0x18c, 0x0e, "DEBUG" },
-};
-
#ifdef CONFIG_DEEP_SLEEP
/* program the regulator (MC34VR500) to support deep sleep */
void ls1twr_program_regulator(void)
@@ -525,10 +487,7 @@
#endif
#endif
- ls1021x_config_caam_stream_id(sec_liodn_tbl,
- ARRAY_SIZE(sec_liodn_tbl));
- ls102xa_config_smmu_stream_id(dev_stream_id,
- ARRAY_SIZE(dev_stream_id));
+ ls102xa_smmu_stream_id_init();
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
enable_layerscape_ns_access();
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 01db078..a72fe52 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -223,10 +223,25 @@
int board_early_init_f(void)
{
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ u32 usb_pwrfault;
+#endif
#ifdef CONFIG_LPUART
u8 uart;
#endif
fsl_lsch2_early_init_f();
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ out_be32(&scfg->rcwpmuxcr0, 0x3333);
+ out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+ usb_pwrfault =
+ (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT);
+ out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+
#ifdef CONFIG_LPUART
/* We use lpuart0 as system console */
uart = QIXIS_READ(brdcfg[14]);
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index c8f723a..66d974a 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -21,6 +21,10 @@
#include <environment.h>
#include <fsl_sec.h>
#include "cpld.h"
+#ifdef CONFIG_U_QE
+#include <fsl_qe.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
@@ -71,23 +75,8 @@
int board_early_init_f(void)
{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
- u32 usb_pwrfault;
-
fsl_lsch2_early_init_f();
-#ifdef CONFIG_HAS_FSL_XHCI_USB
- out_be32(&scfg->rcwpmuxcr0, 0x3333);
- out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
- usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
- SCFG_USBPWRFAULT_USB3_SHIFT) |
- (SCFG_USBPWRFAULT_DEDICATED <<
- SCFG_USBPWRFAULT_USB2_SHIFT) |
- (SCFG_USBPWRFAULT_SHARED <<
- SCFG_USBPWRFAULT_USB1_SHIFT);
- out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
-#endif
-
return 0;
}
@@ -113,11 +102,36 @@
enable_layerscape_ns_access();
#endif
+#ifdef CONFIG_U_QE
+ u_qe_init();
+#endif
+
return 0;
}
int config_board_mux(void)
{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ u32 usb_pwrfault;
+
+ if (hwconfig("qe-hdlc")) {
+ out_be32(&scfg->rcwpmuxcr0,
+ (in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600);
+ printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n",
+ in_be32(&scfg->rcwpmuxcr0));
+ } else {
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ out_be32(&scfg->rcwpmuxcr0, 0x3333);
+ out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+ usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED <<
+ SCFG_USBPWRFAULT_USB1_SHIFT);
+ out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+ }
return 0;
}
@@ -144,6 +158,16 @@
}
#endif
+void fdt_del_qe(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,qe")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
int ft_board_setup(void *blob, bd_t *bd)
{
u64 base[CONFIG_NR_DRAM_BANKS];
@@ -161,6 +185,23 @@
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ /*
+ * qe-hdlc and usb multi-use the pins,
+ * when set hwconfig to qe-hdlc, delete usb node.
+ */
+ if (hwconfig("qe-hdlc"))
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ fdt_del_node_and_alias(blob, "usb1");
+#endif
+ /*
+ * qe just support qe-uart and qe-hdlc,
+ * if qe-uart and qe-hdlc are not set in hwconfig,
+ * delete qe node.
+ */
+ if (!hwconfig("qe-uart") && !hwconfig("qe-hdlc"))
+ fdt_del_qe(blob);
+
return 0;
}
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index b5c44f9..668f684 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -228,6 +228,30 @@
return 0;
}
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ switch (gd->bd->bi_arch_number) {
+ case MACH_TYPE_DM3730_TORPEDO:
+ setenv("fdtimage", "logicpd-torpedo-37xx-devkit.dtb");
+ break;
+ case MACH_TYPE_DM3730_SOM_LV:
+ setenv("fdtimage", "logicpd-som-lv-37xx-devkit.dtb");
+ break;
+ case MACH_TYPE_OMAP3_TORPEDO:
+ setenv("fdtimage", "logicpd-torpedo-35xx-devkit.dtb");
+ break;
+ case MACH_TYPE_OMAP3530_LV_SOM:
+ setenv("fdtimage", "logicpd-som-lv-35xx-devkit.dtb");
+ break;
+ default:
+ /* unknown machine type */
+ break;
+ }
+ return 0;
+}
+#endif
+
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 7f4fe64..1d3a4e0 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -5,6 +5,7 @@
*/
#include <common.h>
+#include <inttypes.h>
#include <config.h>
#include <dm.h>
#include <fdt_support.h>
@@ -56,6 +57,12 @@
u32 end_tag;
};
+struct msg_get_board_serial {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_board_serial get_board_serial;
+ u32 end_tag;
+};
+
struct msg_get_mac_address {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_mac_address get_mac_address;
@@ -281,6 +288,30 @@
}
#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
+static void set_serial_number(void)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_serial, msg, 1);
+ int ret;
+ char serial_string[17] = { 0 };
+
+ if (getenv("serial#"))
+ return;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG_NO_REQ(&msg->get_board_serial, GET_BOARD_SERIAL);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query board serial\n");
+ /* Ignore error; not critical */
+ return;
+ }
+
+ snprintf(serial_string, sizeof(serial_string), "%016" PRIx64,
+ msg->get_board_serial.body.resp.serial);
+ setenv("serial#", serial_string);
+}
+
int misc_init_r(void)
{
set_fdtfile();
@@ -288,6 +319,8 @@
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
set_board_info();
#endif
+ set_serial_number();
+
return 0;
}
diff --git a/board/samsung/origen/tools/mkorigenspl.c b/board/samsung/origen/tools/mkorigenspl.c
index 8b0c3ac..7b5d93b 100644
--- a/board/samsung/origen/tools/mkorigenspl.c
+++ b/board/samsung/origen/tools/mkorigenspl.c
@@ -83,8 +83,8 @@
for (i = 0; i < IMG_SIZE - SPL_HEADER_SIZE; i++)
checksum += buffer[i+16];
- *(ulong *)buffer ^= 0x1f;
- *(ulong *)(buffer+4) ^= checksum;
+ *(unsigned long *)buffer ^= 0x1f;
+ *(unsigned long *)(buffer+4) ^= checksum;
for (i = 1; i < SPL_HEADER_SIZE; i++)
buffer[i] ^= buffer[i-1];
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index fb8475f..d16d73f 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -50,6 +50,7 @@
int i;
int rv = 0;
+ clock_setup(GPIO_A_CLOCK_CFG);
for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
if (rv)
@@ -115,6 +116,13 @@
int rv = 0;
int i;
+ clock_setup(GPIO_B_CLOCK_CFG);
+ clock_setup(GPIO_C_CLOCK_CFG);
+ clock_setup(GPIO_D_CLOCK_CFG);
+ clock_setup(GPIO_E_CLOCK_CFG);
+ clock_setup(GPIO_F_CLOCK_CFG);
+ clock_setup(GPIO_G_CLOCK_CFG);
+
for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) {
rv = stm32_gpio_config(&ext_ram_fmc_gpio[i],
&gpio_ctl_fmc);
diff --git a/board/st/stm32f746-disco/Kconfig b/board/st/stm32f746-disco/Kconfig
new file mode 100644
index 0000000..09289d2
--- /dev/null
+++ b/board/st/stm32f746-disco/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STM32F746_DISCO
+
+config SYS_BOARD
+ string
+ default "stm32f746-disco"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stm32f7"
+
+config SYS_CONFIG_NAME
+ string
+ default "stm32f746-disco"
+
+endif
diff --git a/board/st/stm32f746-disco/MAINTAINERS b/board/st/stm32f746-disco/MAINTAINERS
new file mode 100644
index 0000000..2df0a65
--- /dev/null
+++ b/board/st/stm32f746-disco/MAINTAINERS
@@ -0,0 +1,6 @@
+STM32F746 DISCOVERY BOARD
+M: Vikas Manocha <vikas.manocha@st.com>
+S: Maintained
+F: board/st/stm32f746-disco
+F: include/configs/stm32f746-disco.h
+F: configs/stm32f746-disco_defconfig
diff --git a/board/st/stm32f746-disco/Makefile b/board/st/stm32f746-disco/Makefile
new file mode 100644
index 0000000..db8a0a4
--- /dev/null
+++ b/board/st/stm32f746-disco/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016
+# Vikas Manocha <vikas.manocha@st.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := stm32f746-disco.o
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
new file mode 100644
index 0000000..0e04d14
--- /dev/null
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpio.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_stm32x7.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct stm32_gpio_ctl gpio_ctl_gpout = {
+ .mode = STM32_GPIO_MODE_OUT,
+ .otype = STM32_GPIO_OTYPE_PP,
+ .speed = STM32_GPIO_SPEED_50M,
+ .pupd = STM32_GPIO_PUPD_NO,
+ .af = STM32_GPIO_AF0
+};
+
+const struct stm32_gpio_ctl gpio_ctl_usart = {
+ .mode = STM32_GPIO_MODE_AF,
+ .otype = STM32_GPIO_OTYPE_PP,
+ .speed = STM32_GPIO_SPEED_50M,
+ .pupd = STM32_GPIO_PUPD_UP,
+ .af = STM32_GPIO_AF7
+};
+
+static const struct stm32_gpio_dsc usart_gpio[] = {
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */
+ {STM32_GPIO_PORT_B, STM32_GPIO_PIN_7}, /* RX */
+};
+
+int uart_setup_gpio(void)
+{
+ int i;
+ int rv = 0;
+
+ clock_setup(GPIO_A_CLOCK_CFG);
+ clock_setup(GPIO_B_CLOCK_CFG);
+ for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
+ rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
+ if (rv)
+ goto out;
+ }
+
+out:
+ return rv;
+}
+
+static const struct stm32x7_serial_platdata serial_platdata = {
+ .base = (struct stm32_usart *)USART1_BASE,
+ .clock = CONFIG_SYS_CLK_FREQ,
+};
+
+U_BOOT_DEVICE(stm32x7_serials) = {
+ .name = "serial_stm32x7",
+ .platdata = &serial_platdata,
+};
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ int res;
+
+ res = uart_setup_gpio();
+ clock_setup(USART1_CLOCK_CFG);
+ if (res)
+ return res;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
+ gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE;
+
+ gd->ram_size = CONFIG_SYS_RAM_SIZE;
+ return 0;
+}
diff --git a/cmd/bootm.c b/cmd/bootm.c
index 48738ac..555ccbc 100644
--- a/cmd/bootm.c
+++ b/cmd/bootm.c
@@ -755,15 +755,15 @@
#ifdef CONFIG_SYS_LONGHELP
static char booti_help_text[] =
"[addr [initrd[:size]] [fdt]]\n"
- " - boot Linux Image stored in memory\n"
+ " - boot arm64 Linux Image stored in memory\n"
"\tThe argument 'initrd' is optional and specifies the address\n"
- "\tof the initrd in memory. The optional argument ':size' allows\n"
- "\tspecifying the size of RAW initrd.\n"
+ "\tof an initrd in memory. The optional parameter ':size' allows\n"
+ "\tspecifying the size of a RAW initrd.\n"
#if defined(CONFIG_OF_LIBFDT)
- "\tSince booting a Linux kernelrequires a flat device-tree\n"
- "\ta third argument is required which is the address of the\n"
- "\tdevice-tree blob. To boot that kernel without an initrd image,\n"
- "\tuse a '-' for the second argument.\n"
+ "\tSince booting a Linux kernel requires a flat device-tree, a\n"
+ "\tthird argument providing the address of the device-tree blob\n"
+ "\tis required. To boot a kernel with a device-tree blob but\n"
+ "\twithout an initrd image, use a '-' for the initrd argument.\n"
#endif
"";
#endif
diff --git a/cmd/dfu.c b/cmd/dfu.c
index 6d95ce9..d8aae26 100644
--- a/cmd/dfu.c
+++ b/cmd/dfu.c
@@ -79,6 +79,26 @@
if (ctrlc())
goto exit;
+ if (dfu_get_defer_flush()) {
+ /*
+ * Call to usb_gadget_handle_interrupts() is necessary
+ * to act on ZLP OUT transaction from HOST PC after
+ * transmitting the whole file.
+ *
+ * If this ZLP OUT packet is NAK'ed, the HOST libusb
+ * function fails after timeout (by default it is set to
+ * 5 seconds). In such situation the dfu-util program
+ * exits with error message.
+ */
+ usb_gadget_handle_interrupts(controller_index);
+ ret = dfu_flush(dfu_get_defer_flush(), NULL, 0, 0);
+ dfu_set_defer_flush(NULL);
+ if (ret) {
+ error("Deferred dfu_flush() failed!");
+ goto exit;
+ }
+ }
+
WATCHDOG_RESET();
usb_gadget_handle_interrupts(controller_index);
}
diff --git a/cmd/mem.c b/cmd/mem.c
index efa3929..a690957 100644
--- a/cmd/mem.c
+++ b/cmd/mem.c
@@ -1038,7 +1038,7 @@
return -1;
}
- printf("Testing %08x ... %08x:\n", (uint)start, (uint)end);
+ printf("Testing %08lx ... %08lx:\n", start, end);
debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__,
start, end);
diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig
index 6044ae9..d1da759 100644
--- a/configs/cm_t43_defconfig
+++ b/configs/cm_t43_defconfig
@@ -2,6 +2,7 @@
CONFIG_TARGET_CM_T43=y
CONFIG_DM_GPIO=y
CONFIG_SPL=y
+CONFIG_SYS_PROMPT="CM-T43 # "
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
@@ -10,3 +11,15 @@
# CONFIG_CMD_NFS is not set
CONFIG_DM=y
CONFIG_SYS_NS16550=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig
index 10d39eb..4d2aa6c 100644
--- a/configs/kwb_defconfig
+++ b/configs/kwb_defconfig
@@ -2,7 +2,7 @@
CONFIG_TARGET_KWB=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
-CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# "
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_GO is not set
@@ -14,9 +14,18 @@
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index 2f16339..842f645 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 44b2a0d..0e1a59d 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index 6878df4..f4c81e2 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -1,6 +1,10 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 1186af2..e81448d 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -1,7 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
CONFIG_SYS_EXTRA_OPTIONS="LPUART"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_FSL_LPUART=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index 0f740fd..2e98d6c 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
CONFIG_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds"
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig
similarity index 71%
rename from configs/ls1021aqds_sdcard_defconfig
rename to configs/ls1021aqds_sdcard_ifc_defconfig
index 3249b48..e283f69 100644
--- a/configs/ls1021aqds_sdcard_defconfig
+++ b/configs/ls1021aqds_sdcard_ifc_defconfig
@@ -1,8 +1,11 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1021AQDS=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
new file mode 100644
index 0000000..cd75af6
--- /dev/null
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021AQDS=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
new file mode 100644
index 0000000..7cfed4a
--- /dev/null
+++ b/configs/stm32f746-disco_defconfig
@@ -0,0 +1,9 @@
+CONFIG_ARM=y
+CONFIG_STM32=y
+CONFIG_STM32F7=y
+CONFIG_TARGET_STM32F746_DISCO=y
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig
index 7518774..168e379 100644
--- a/configs/tseries_mmc_defconfig
+++ b/configs/tseries_mmc_defconfig
@@ -2,7 +2,7 @@
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
-CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# "
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -11,9 +11,18 @@
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig
index 65d514a..8151caf 100644
--- a/configs/tseries_nand_defconfig
+++ b/configs/tseries_nand_defconfig
@@ -2,7 +2,7 @@
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
-CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# "
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -11,9 +11,19 @@
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig
index 11e4e6b..901c55e 100644
--- a/configs/tseries_spi_defconfig
+++ b/configs/tseries_spi_defconfig
@@ -2,7 +2,7 @@
CONFIG_TARGET_TSERIES=y
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
-CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# "
+CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
@@ -11,11 +11,23 @@
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_NETCONSOLE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_STORAGE=y
diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt
index 61f2da3..cddfb9f 100644
--- a/doc/driver-model/serial-howto.txt
+++ b/doc/driver-model/serial-howto.txt
@@ -4,7 +4,6 @@
Almost all of the serial drivers have been converted as at January 2016. These
ones remain:
- arm_dcc.c
mcfuart.c
serial_bfin.c
serial_pxa.c
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index b553e3c..b766470 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -12,6 +12,9 @@
#include "jr.h"
#include "jobdesc.h"
#include "desc_constr.h"
+#ifdef CONFIG_FSL_CORENET
+#include <asm/fsl_pamu.h>
+#endif
#define CIRC_CNT(head, tail, size) (((head) - (tail)) & (size - 1))
#define CIRC_SPACE(head, tail, size) CIRC_CNT((tail), (head) + 1, (size))
@@ -95,14 +98,16 @@
JR_SIZE * sizeof(dma_addr_t));
if (!jr.input_ring)
return -1;
+
+ jr.op_size = roundup(JR_SIZE * sizeof(struct op_ring),
+ ARCH_DMA_MINALIGN);
jr.output_ring =
- (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
- JR_SIZE * sizeof(struct op_ring));
+ (struct op_ring *)memalign(ARCH_DMA_MINALIGN, jr.op_size);
if (!jr.output_ring)
return -1;
memset(jr.input_ring, 0, JR_SIZE * sizeof(dma_addr_t));
- memset(jr.output_ring, 0, JR_SIZE * sizeof(struct op_ring));
+ memset(jr.output_ring, 0, jr.op_size);
start_jr0();
@@ -190,8 +195,8 @@
unsigned long start = (unsigned long)&jr.info[head] &
~(ARCH_DMA_MINALIGN - 1);
- unsigned long end = ALIGN(start + sizeof(struct jr_info),
- ARCH_DMA_MINALIGN);
+ unsigned long end = ALIGN((unsigned long)&jr.info[head] +
+ sizeof(struct jr_info), ARCH_DMA_MINALIGN);
flush_dcache_range(start, end);
#ifdef CONFIG_PHYS_64BIT
@@ -216,11 +221,19 @@
#endif /* ifdef CONFIG_PHYS_64BIT */
start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
- end = ALIGN(start + sizeof(phys_addr_t), ARCH_DMA_MINALIGN);
+ end = ALIGN((unsigned long)&jr.input_ring[head] +
+ sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
flush_dcache_range(start, end);
jr.head = (head + 1) & (jr.size - 1);
+ /* Invalidate output ring */
+ start = (unsigned long)jr.output_ring &
+ ~(ARCH_DMA_MINALIGN - 1);
+ end = ALIGN((unsigned long)jr.output_ring + jr.op_size,
+ ARCH_DMA_MINALIGN);
+ invalidate_dcache_range(start, end);
+
sec_out32(®s->irja, 1);
return 0;
@@ -241,12 +254,6 @@
#endif
while (sec_in32(®s->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
- unsigned long start = (unsigned long)jr.output_ring &
- ~(ARCH_DMA_MINALIGN - 1);
- unsigned long end = ALIGN(start +
- sizeof(struct op_ring)*JR_SIZE,
- ARCH_DMA_MINALIGN);
- invalidate_dcache_range(start, end);
found = 0;
@@ -530,18 +537,38 @@
uint32_t mcr = sec_in32(&sec->mcfgr);
int ret = 0;
+#ifdef CONFIG_FSL_CORENET
+ uint32_t liodnr;
+ uint32_t liodn_ns;
+ uint32_t liodn_s;
+#endif
+
mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0x2 << MCFGR_AWCACHE_SHIFT);
#ifdef CONFIG_PHYS_64BIT
mcr |= (1 << MCFGR_PS_SHIFT);
#endif
sec_out32(&sec->mcfgr, mcr);
+#ifdef CONFIG_FSL_CORENET
+ liodnr = sec_in32(&sec->jrliodnr[0].ls);
+ liodn_ns = (liodnr & JRNSLIODN_MASK) >> JRNSLIODN_SHIFT;
+ liodn_s = (liodnr & JRSLIODN_MASK) >> JRSLIODN_SHIFT;
+#endif
+
ret = jr_init();
if (ret < 0) {
printf("SEC initialization failed\n");
return -1;
}
+#ifdef CONFIG_FSL_CORENET
+ ret = sec_config_pamu_table(liodn_ns, liodn_s);
+ if (ret < 0)
+ return -1;
+
+ pamu_enable();
+#endif
+
if (get_rng_vid() >= 4) {
if (rng_init() < 0) {
printf("RNG instantiation failed\n");
diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h
index 5899696..545d964 100644
--- a/drivers/crypto/fsl/jr.h
+++ b/drivers/crypto/fsl/jr.h
@@ -72,6 +72,8 @@
int write_idx;
/* Size of the rings. */
int size;
+ /* Op ring size aligned to cache line size */
+ int op_size;
/* The ip and output rings have to be accessed by SEC. So the
* pointers will ahve to point to the housekeeping region provided
* by SEC
diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c
index 75a84e1..50f86d3 100644
--- a/drivers/gpio/stm32_gpio.c
+++ b/drivers/gpio/stm32_gpio.c
@@ -19,17 +19,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_STM32F4)
-#define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000)
-#define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400)
-#define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800)
-#define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00)
-#define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000)
-#define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400)
-#define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800)
-#define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00)
-#define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000)
-
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
static const unsigned long io_base[] = {
STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE,
STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE,
@@ -70,8 +60,6 @@
gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port];
- setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port);
-
i = (dsc->pin & 0x07) * 4;
clrsetbits_le32(&gpio_regs->afr[dsc->pin >> 3], 0xF << i, ctl->af << i);
@@ -87,14 +75,6 @@
return rv;
}
#elif defined(CONFIG_STM32F1)
-#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800)
-#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00)
-#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000)
-#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400)
-#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800)
-#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00)
-#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000)
-
static const unsigned long io_base[] = {
STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE,
STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE,
@@ -141,9 +121,6 @@
gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port];
- /* Enable clock for GPIO port */
- setbits_le32(&STM32_RCC->apb2enr, 0x04 << dsc->port);
-
if (p < 8) {
cr = &gpio_regs->crl;
crp = p;
@@ -230,7 +207,7 @@
dsc.port = stm32_gpio_to_port(gpio);
dsc.pin = stm32_gpio_to_pin(gpio);
-#if defined(CONFIG_STM32F4)
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
ctl.af = STM32_GPIO_AF0;
ctl.mode = STM32_GPIO_MODE_IN;
ctl.otype = STM32_GPIO_OTYPE_PP;
@@ -256,7 +233,7 @@
dsc.port = stm32_gpio_to_port(gpio);
dsc.pin = stm32_gpio_to_pin(gpio);
-#if defined(CONFIG_STM32F4)
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
ctl.af = STM32_GPIO_AF0;
ctl.mode = STM32_GPIO_MODE_OUT;
ctl.pupd = STM32_GPIO_PUPD_NO;
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index a3c9f99..493cdc6 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -6,6 +6,7 @@
obj-y += dtsec.o
obj-y += eth.o
+obj-y += fdt.o
obj-y += fm.o
obj-y += init.o
obj-y += tgec.o
diff --git a/drivers/net/fm/fdt.c b/drivers/net/fm/fdt.c
new file mode 100644
index 0000000..9918d80
--- /dev/null
+++ b/drivers/net/fm/fdt.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <asm/io.h>
+#include <fsl_qe.h> /* For struct qe_firmware */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+/**
+ * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree
+ *
+ * The binding for an Fman firmware node is documented in
+ * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains
+ * the actual Fman firmware binary data. The operating system is expected to
+ * be able to parse the binary data to determine any attributes it needs.
+ */
+void fdt_fixup_fman_firmware(void *blob)
+{
+ int rc, fmnode, fwnode = -1;
+ uint32_t phandle;
+ struct qe_firmware *fmanfw;
+ const struct qe_header *hdr;
+ unsigned int length;
+ uint32_t crc;
+ const char *p;
+
+ /* The first Fman we find will contain the actual firmware. */
+ fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman");
+ if (fmnode < 0)
+ /* Exit silently if there are no Fman devices */
+ return;
+
+ /* If we already have a firmware node, then also exit silently. */
+ if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0)
+ return;
+
+ /* If the environment variable is not set, then exit silently */
+ p = getenv("fman_ucode");
+ if (!p)
+ return;
+
+ fmanfw = (struct qe_firmware *)simple_strtoul(p, NULL, 16);
+ if (!fmanfw)
+ return;
+
+ hdr = &fmanfw->header;
+ length = fdt32_to_cpu(hdr->length);
+
+ /* Verify the firmware. */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printf("Data at %p is not an Fman firmware\n", fmanfw);
+ return;
+ }
+
+ if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
+ printf("Fman firmware at %p is too large (size=%u)\n",
+ fmanfw, length);
+ return;
+ }
+
+ length -= sizeof(u32); /* Subtract the size of the CRC */
+ crc = fdt32_to_cpu(*(u32 *)((void *)fmanfw + length));
+ if (crc != crc32_no_comp(0, (void *)fmanfw, length)) {
+ printf("Fman firmware at %p has invalid CRC\n", fmanfw);
+ return;
+ }
+
+ length += sizeof(u32);
+
+ /* Increase the size of the fdt to make room for the node. */
+ rc = fdt_increase_size(blob, length);
+ if (rc < 0) {
+ printf("Unable to make room for Fman firmware: %s\n",
+ fdt_strerror(rc));
+ return;
+ }
+
+ /* Create the firmware node. */
+ fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware");
+ if (fwnode < 0) {
+ char s[64];
+ fdt_get_path(blob, fmnode, s, sizeof(s));
+ printf("Could not add firmware node to %s: %s\n", s,
+ fdt_strerror(fwnode));
+ return;
+ }
+ rc = fdt_setprop_string(blob, fwnode, "compatible",
+ "fsl,fman-firmware");
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add compatible property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+ phandle = fdt_create_phandle(blob, fwnode);
+ if (!phandle) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add phandle property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+ rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, length);
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fwnode, s, sizeof(s));
+ printf("Could not add firmware property to node %s: %s\n", s,
+ fdt_strerror(rc));
+ return;
+ }
+
+ /* Find all other Fman nodes and point them to the firmware node. */
+ while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode,
+ "fsl,fman")) > 0) {
+ rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle",
+ phandle);
+ if (rc < 0) {
+ char s[64];
+ fdt_get_path(blob, fmnode, s, sizeof(s));
+ printf("Could not add pointer property to node %s: %s\n",
+ s, fdt_strerror(rc));
+ return;
+ }
+ }
+}
+#endif
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 40fbf19..e2a8ed3 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -10,7 +10,7 @@
#include <asm/errno.h>
#include "fm.h"
-#include "../../qe/qe.h" /* For struct qe_firmware */
+#include <fsl_qe.h> /* For struct qe_firmware */
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index d5bf6f4..9eb605b 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -266,7 +266,7 @@
int exec_method)
{
struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
- struct pci_rom_header *rom, *ram = NULL;
+ struct pci_rom_header *rom = NULL, *ram = NULL;
int vesa_mode = -1;
bool emulate, alloced;
int ret;
diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c
index dbc7a73..0fd0ad4 100644
--- a/drivers/power/pmic/pmic_tps65218.c
+++ b/drivers/power/pmic/pmic_tps65218.c
@@ -11,6 +11,20 @@
#include <power/pmic.h>
#include <power/tps65218.h>
+int tps65218_reg_read(uchar dest_reg, uchar *dest_val)
+{
+ uchar read_val;
+ int ret;
+
+ ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
+ if (ret)
+ return ret;
+
+ *dest_val = read_val;
+
+ return 0;
+}
+
/**
* tps65218_reg_write() - Generic function that can write a TPS65218 PMIC
* register or bit field regardless of protection
@@ -98,6 +112,48 @@
return 0;
}
+/**
+ * tps65218_toggle_fseal() - Perform the sequence that toggles the FSEAL bit.
+ *
+ * @return: 0 on success, -EBADE if the sequence was broken
+ */
+int tps65218_toggle_fseal(void)
+{
+ if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
+ 0xb1, TPS65218_MASK_ALL_BITS))
+ return -EBADE;
+
+ if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
+ 0xfe, TPS65218_MASK_ALL_BITS))
+ return -EBADE;
+
+ if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
+ 0xa3, TPS65218_MASK_ALL_BITS))
+ return -EBADE;
+
+ return 0;
+}
+
+/**
+ * tps65218_lock_fseal() - Perform the sequence that locks the FSEAL bit to 1.
+ *
+ * The FSEAL bit prevents the PMIC from turning off DCDC5 and DCDC6. It can be
+ * toggled at most 3 times: 0->1, 1->0, and finally 0->1. After the third switch
+ * its value is locked and can only be reset by powering off the PMIC entirely.
+ *
+ * @return: 0 on success, -EBADE if the sequence was broken
+ */
+int tps65218_lock_fseal(void)
+{
+ int i;
+
+ for (i = 0; i < 3; i++)
+ if (tps65218_toggle_fseal())
+ return -EBADE;
+
+ return 0;
+}
+
int power_tps65218_init(unsigned char bus)
{
static const char name[] = "TPS65218_PMIC";
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index dfae4bf..4f48f98 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -10,7 +10,7 @@
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
-#include "qe.h"
+#include <fsl_qe.h>
#ifdef CONFIG_QE
DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 08620b2..2b98984 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -12,7 +12,7 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
+#include <fsl_qe.h>
#ifdef CONFIG_LS102XA
#include <asm/arch/immap_ls102xa.h>
#endif
@@ -20,7 +20,9 @@
#define MPC85xx_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr = NULL;
+#ifdef CONFIG_QE
static qe_snum_t snums[QE_NUM_OF_SNUM];
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -81,6 +83,7 @@
return (void *)&qe_immr->muram[offset];
}
+#ifdef CONFIG_QE
static void qe_sdma_init(void)
{
volatile sdma_t *p;
@@ -184,12 +187,12 @@
qe_sdma_init();
qe_snums_init();
}
+#endif
#ifdef CONFIG_U_QE
void u_qe_init(void)
{
- uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
- qe_immr = (qe_map_t *)qe_base;
+ qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
@@ -200,9 +203,8 @@
void u_qe_resume(void)
{
qe_map_t *qe_immrr;
- uint qe_base = CONFIG_SYS_IMMR + QE_IMMR_OFFSET; /* QE immr base */
- qe_immrr = (qe_map_t *)qe_base;
+ qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr);
out_be32(&qe_immrr->iram.iready, QE_IRAM_READY);
}
@@ -214,6 +216,7 @@
(u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+#ifdef CONFIG_QE
void qe_assign_page(uint snum, uint para_ram_base)
{
u32 cecr;
@@ -229,6 +232,7 @@
return;
}
+#endif
/*
* brg: 0~15 as BRG1~BRG16
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 85386bf..e011886 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -12,8 +12,8 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
#include "uccf.h"
+#include <fsl_qe.h>
void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
{
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
index 55941e4..aa817e7 100644
--- a/drivers/qe/uccf.h
+++ b/drivers/qe/uccf.h
@@ -11,8 +11,8 @@
#define __UCCF_H__
#include "common.h"
-#include "qe.h"
#include "linux/immap_qe.h"
+#include <fsl_qe.h>
/* Fast or Giga ethernet
*/
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index e0ab04a..40cccc2 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -12,11 +12,11 @@
#include "asm/errno.h"
#include "asm/io.h"
#include "linux/immap_qe.h"
-#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <fsl_qe.h>
#include <phy.h>
/* Default UTBIPAR SMI address */
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6b559f7..22e248f 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -10,8 +10,8 @@
#ifndef __UEC_H__
#define __UEC_H__
-#include "qe.h"
#include "uccf.h"
+#include <fsl_qe.h>
#include <phy.h>
#define MAX_TX_THREADS 8
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index e701787..272874d 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -16,11 +16,11 @@
#include "asm/errno.h"
#include "linux/immap_qe.h"
#include "asm/io.h"
-#include "qe.h"
#include "uccf.h"
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <fsl_qe.h>
#include <phy.h>
#define ugphy_printk(format, arg...) \
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c63999a..05bdf56 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -37,6 +37,7 @@
obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o
obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o
+obj-$(CONFIG_STM32X7_SERIAL) += serial_stm32x7.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
new file mode 100644
index 0000000..cfbfab7
--- /dev/null
+++ b/drivers/serial/serial_stm32x7.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <serial.h>
+#include <dm/platform_data/serial_stm32x7.h>
+#include "serial_stm32x7.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct stm32x7_serial_platdata *plat = dev->platdata;
+ struct stm32_usart *const usart = plat->base;
+ writel(plat->clock/baudrate, &usart->brr);
+
+ return 0;
+}
+
+static int stm32_serial_getc(struct udevice *dev)
+{
+ struct stm32x7_serial_platdata *plat = dev->platdata;
+ struct stm32_usart *const usart = plat->base;
+
+ if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
+ return -EAGAIN;
+
+ return readl(&usart->rd_dr);
+}
+
+static int stm32_serial_putc(struct udevice *dev, const char c)
+{
+ struct stm32x7_serial_platdata *plat = dev->platdata;
+ struct stm32_usart *const usart = plat->base;
+
+ if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0)
+ return -EAGAIN;
+
+ writel(c, &usart->tx_dr);
+
+ return 0;
+}
+
+static int stm32_serial_pending(struct udevice *dev, bool input)
+{
+ struct stm32x7_serial_platdata *plat = dev->platdata;
+ struct stm32_usart *const usart = plat->base;
+
+ if (input)
+ return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0;
+ else
+ return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1;
+}
+
+static int stm32_serial_probe(struct udevice *dev)
+{
+ struct stm32x7_serial_platdata *plat = dev->platdata;
+ struct stm32_usart *const usart = plat->base;
+ setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
+
+ return 0;
+}
+
+static const struct dm_serial_ops stm32_serial_ops = {
+ .putc = stm32_serial_putc,
+ .pending = stm32_serial_pending,
+ .getc = stm32_serial_getc,
+ .setbrg = stm32_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_stm32) = {
+ .name = "serial_stm32x7",
+ .id = UCLASS_SERIAL,
+ .ops = &stm32_serial_ops,
+ .probe = stm32_serial_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/serial/serial_stm32x7.h b/drivers/serial/serial_stm32x7.h
new file mode 100644
index 0000000..6190d67
--- /dev/null
+++ b/drivers/serial/serial_stm32x7.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SERIAL_STM32_X7_
+#define _SERIAL_STM32_X7_
+
+struct stm32_usart {
+ u32 cr1;
+ u32 cr2;
+ u32 cr3;
+ u32 brr;
+ u32 gtpr;
+ u32 rtor;
+ u32 rqr;
+ u32 sr;
+ u32 icr;
+ u32 rd_dr;
+ u32 tx_dr;
+};
+
+
+#define USART_CR1_RE (1 << 2)
+#define USART_CR1_TE (1 << 3)
+#define USART_CR1_UE (1 << 0)
+
+#define USART_SR_FLAG_RXNE (1 << 5)
+#define USART_SR_FLAG_TXE (1 << 7)
+
+#define USART_BRR_F_MASK 0xFF
+#define USART_BRR_M_SHIFT 4
+#define USART_BRR_M_MASK 0xFFF0
+
+#endif
diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
index b9c9a84..36734e2 100644
--- a/drivers/usb/eth/usb_ether.c
+++ b/drivers/usb/eth/usb_ether.c
@@ -73,7 +73,7 @@
}
ueth->rxsize = rxsize;
- ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN);
+ ueth->rxbuf = memalign(ARCH_DMA_MINALIGN, rxsize);
if (!ueth->rxbuf)
return -ENOMEM;
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 77a1567..7d88008 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -44,6 +44,8 @@
unsigned int poll_timeout;
};
+struct dfu_entity *dfu_defer_flush;
+
typedef int (*dfu_state_fn) (struct f_dfu *,
const struct usb_ctrlrequest *,
struct usb_gadget *,
@@ -167,14 +169,7 @@
static void dnload_request_flush(struct usb_ep *ep, struct usb_request *req)
{
struct f_dfu *f_dfu = req->context;
- int ret;
-
- ret = dfu_flush(dfu_get_entity(f_dfu->altsetting), req->buf,
- req->length, f_dfu->blk_seq_num);
- if (ret) {
- f_dfu->dfu_status = DFU_STATUS_errUNKNOWN;
- f_dfu->dfu_state = DFU_STATE_dfuERROR;
- }
+ dfu_set_defer_flush(dfu_get_entity(f_dfu->altsetting));
}
static inline int dfu_get_manifest_timeout(struct dfu_entity *dfu)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 87e54eb..a54b4ee 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -382,7 +382,7 @@
strsep(&cmd, ":");
if (!cmd) {
- error("missing variable\n");
+ error("missing variable");
fastboot_tx_write_str("FAILmissing var");
return;
}
@@ -413,7 +413,7 @@
else
strcpy(response, "FAILValue not set");
} else {
- error("unknown variable: %s\n", cmd);
+ printf("WARNING: unknown variable: %s\n", cmd);
strcpy(response, "FAILVariable not implemented");
}
fastboot_tx_write_str(response);
@@ -561,7 +561,7 @@
strsep(&cmd, ":");
if (!cmd) {
- error("missing partition name\n");
+ error("missing partition name");
fastboot_tx_write_str("FAILmissing partition name");
return;
}
@@ -683,7 +683,7 @@
}
if (!func_cb) {
- error("unknown command: %s\n", cmdbuf);
+ error("unknown command: %s", cmdbuf);
fastboot_tx_write_str("FAILunknown command");
} else {
if (req->actual < req->length) {
@@ -691,7 +691,7 @@
buf[req->actual] = 0;
func_cb(ep, req);
} else {
- error("buffer overflow\n");
+ error("buffer overflow");
fastboot_tx_write_str("FAILbuffer overflow");
}
}
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
index 84114c5..4444988 100644
--- a/drivers/usb/host/ehci-generic.c
+++ b/drivers/usb/host/ehci-generic.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <clk.h>
+#include <asm/io.h>
#include <dm.h>
#include "ehci.h"
@@ -20,7 +21,7 @@
static int ehci_usb_probe(struct udevice *dev)
{
- struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
+ struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
int i;
@@ -36,6 +37,7 @@
clk_dev->name, clk_id);
}
+ hccr = map_physmem(dev_get_addr(dev), 0x100, MAP_NOCACHE);
hcor = (struct ehci_hcor *)((uintptr_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c664b16..8f259be 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -134,6 +134,8 @@
tmp |= USBMODE_CM_HC;
#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
tmp |= USBMODE_BE;
+#else
+ tmp &= ~USBMODE_BE;
#endif
ehci_writel(reg_ptr, tmp);
}
@@ -245,7 +247,7 @@
idx = 0;
while (idx < QT_BUFFER_CNT) {
- td->qt_buffer[idx] = cpu_to_hc32(addr);
+ td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr));
td->qt_buffer_hi[idx] = 0;
next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1);
delta = next - addr;
@@ -398,7 +400,7 @@
* qh_overlay.qt_next ...... 13-10 H
* - qh_overlay.qt_altnext
*/
- qh->qh_link = cpu_to_hc32((unsigned long)&ctrl->qh_list | QH_LINK_TYPE_QH);
+ qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH);
c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe);
maxpacket = usb_maxpacket(dev, pipe);
endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) |
@@ -415,7 +417,6 @@
qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
tdp = &qh->qh_overlay.qt_next;
-
if (req != NULL) {
/*
* Setup request qTD (3.5 in ehci-r10.pdf)
@@ -438,7 +439,7 @@
goto fail;
}
/* Update previous qTD! */
- *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]);
+ *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
tdp = &qtd[qtd_counter++].qt_next;
toggle = 1;
}
@@ -497,7 +498,7 @@
goto fail;
}
/* Update previous qTD! */
- *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]);
+ *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
tdp = &qtd[qtd_counter++].qt_next;
/*
* Data toggle has to be adjusted since the qTD transfer
@@ -528,11 +529,11 @@
QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
/* Update previous qTD! */
- *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]);
+ *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
tdp = &qtd[qtd_counter++].qt_next;
}
- ctrl->qh_list.qh_link = cpu_to_hc32((unsigned long)qh | QH_LINK_TYPE_QH);
+ ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH);
/* Flush dcache */
flush_dcache_range((unsigned long)&ctrl->qh_list,
@@ -542,7 +543,7 @@
ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
/* Set async. queue head pointer. */
- ehci_writel(&ctrl->hcor->or_asynclistaddr, (unsigned long)&ctrl->qh_list);
+ ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list));
usbsts = ehci_readl(&ctrl->hcor->or_usbsts);
ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f));
@@ -989,7 +990,7 @@
/* Set head of reclaim list */
memset(qh_list, 0, sizeof(*qh_list));
- qh_list->qh_link = cpu_to_hc32((unsigned long)qh_list | QH_LINK_TYPE_QH);
+ qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH);
qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
QH_ENDPT1_EPS(USB_SPEED_HIGH));
qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
@@ -1001,7 +1002,7 @@
ALIGN_END_ADDR(struct QH, qh_list, 1));
/* Set async. queue head pointer. */
- ehci_writel(&ctrl->hcor->or_asynclistaddr, (unsigned long)qh_list);
+ ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list));
/*
* Set up periodic list
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index b41c04a..826b3fe 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -102,8 +102,9 @@
} __attribute__ ((packed));
#if defined CONFIG_EHCI_DESC_BIG_ENDIAN
-#define ehci_readl(x) (*((volatile u32 *)(x)))
-#define ehci_writel(a, b) (*((volatile u32 *)(a)) = ((volatile u32)b))
+#define ehci_readl(x) cpu_to_be32((*((volatile u32 *)(x))))
+#define ehci_writel(a, b) (*((volatile u32 *)(a)) = \
+ cpu_to_be32(((volatile u32)b)))
#else
#define ehci_readl(x) cpu_to_le32((*((volatile u32 *)(x))))
#define ehci_writel(a, b) (*((volatile u32 *)(a)) = \
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index a257084..c9515a8 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -130,7 +130,6 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_FAT_WRITE
-
/* Fastboot and USB OTG */
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
@@ -150,23 +149,4 @@
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
-#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 0
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USBID_ADDR 0x34052c46
-#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
-#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
-#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
-
#endif /* __BCM28155_AP_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index ffc6811..a94b1e2 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -3,7 +3,7 @@
*
* common parts used by B&R AM335x based boards
*
- * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
@@ -12,25 +12,9 @@
#ifndef __BUR_AM335X_COMMON_H__
#define __BUR_AM335X_COMMON_H__
/* ------------------------------------------------------------------------- */
-#define BUR_COMMON_ENV \
-"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \
-"brdefaultip=if test -r ${ipaddr}; then; else" \
-" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
-" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
-"netconsole=echo switching to network console ...; " \
-"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
-"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
-"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
-"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
-
-#define CONFIG_PREBOOT "run brdefaultip"
-#define CONFIG_CMD_TIME
-
-
#define CONFIG_AM33XX
#define CONFIG_OMAP
#define CONFIG_OMAP_COMMON
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
@@ -53,24 +37,11 @@
#define CONFIG_BAUDRATE 115200
/* Network defines */
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 2
-#define CONFIG_CMD_PING
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
-#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_PHYLIB
#define CONFIG_PHY_NATSEMI
-#define CONFIG_SPL_NET_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-/* Network console */
-#define CONFIG_NETCONSOLE 1
-#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
+
/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x402F0400 and 0x4030B800 as a download area and
@@ -109,42 +80,8 @@
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
-/*
- * ----------------------------------------------------------------------------
- * The following are general good-enough settings for U-Boot. We set a
- * large malloc pool as we generally have a lot of DDR, and we opt for
- * function over binary size in the main portion of U-Boot as this is
- * generally easily constrained later if needed. We enable the config
- * options that give us information in the environment about what board
- * we are on so we do not need to rely on the command prompt. We set a
- * console baudrate of 115200 and use the default baud rate table.
- */
-#define CONFIG_SYS_MALLOC_LEN (5120 << 10)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-
-/* As stated above, the following choices are optional. */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS 64
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
- sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/*
* Our platforms make use of SPL to initalize the hardware (primarily
diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h
new file mode 100644
index 0000000..f183775
--- /dev/null
+++ b/include/configs/bur_cfg_common.h
@@ -0,0 +1,64 @@
+/*
+ * bur_cfg_common.h
+ *
+ * common parts used over all B&R boards
+ *
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BUR_CFG_COMMON_H__
+#define __BUR_CFG_COMMON_H__
+/* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \
+" source ${scradr}\0" \
+"brdefaultip=if test -r ${ipaddr}; then; else" \
+" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
+" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
+"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
+"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_PREBOOT "run cfgscr; run brdefaultip"
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Network defines */
+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 2
+
+/* Network console */
+#define CONFIG_NETCONSOLE 1
+#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+
+/* As stated above, the following choices are optional. */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS 64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#endif /* __BUR_CFG_COMMON_H__ */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index d3cd38d..1c1951c 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -18,10 +18,12 @@
#include <asm/arch/omap.h>
/* Serial support */
-#define CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 48000000
#define CONFIG_SYS_NS16550_COM1 0x44e09000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#endif
/* NAND support */
#define CONFIG_NAND
@@ -68,9 +70,7 @@
#define CONFIG_AM437X_USB2PHY2_HOST
/* SPI Flash support */
-#define CONFIG_SPI_FLASH
#define CONFIG_TI_SPI_MMAP
-#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -98,9 +98,8 @@
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SPL_GPIO_SUPPORT
#undef CONFIG_SPL_NAND_SUPPORT
-#undef CONFIG_SPL_BOARD_INIT
-#undef CONFIG_BOOTDELAY
-#include <config_distro_defaults.h>
+#undef CONFIG_SYS_MONITOR_LEN
+#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_CMD_IMLS
@@ -165,8 +164,12 @@
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
#endif /* __CONFIG_CM_T43_H */
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 45253b8..60e6496 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -12,6 +12,7 @@
#ifndef __CONFIG_KWB_H__
#define __CONFIG_KWB_H__
+#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
@@ -27,6 +28,9 @@
#define CONFIG_BMP_24BMP
#define CONFIG_BMP_32BPP
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -103,10 +107,9 @@
#define CONFIG_BOOTDELAY 0
/* undefine command which we not need here */
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
/* Support both device trees and ATAGs. */
#define CONFIG_OF_LIBFDT
@@ -122,17 +125,11 @@
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
@@ -151,4 +148,4 @@
#define CONFIG_CMD_FS_GENERIC
#endif /* CONFIG_MMC, ... */
-#endif /* ! __CONFIG_TSERIES_H__ */
+#endif /* __CONFIG_KWB_H__ */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index f6efc55..39d747f 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -42,7 +42,7 @@
unsigned long get_board_ddr_clk(void);
#endif
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#define CONFIG_QIXIS_I2C_ACCESS
@@ -56,7 +56,13 @@
#endif
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
+#endif
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -87,6 +93,9 @@
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_NO_FLASH
#endif
@@ -162,7 +171,7 @@
/*
* IFC Definitions
*/
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@@ -375,7 +384,9 @@
#else
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
+#endif
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
@@ -410,7 +421,7 @@
#define CONFIG_DOS_PARTITION
/* SPI */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
/* QSPI */
#define QSPI0_AMBA_BASE 0x40000000
#define FSL_QSPI_FLASH_SIZE (1 << 24)
@@ -555,6 +566,10 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#undef CONFIG_CMD_IMLS
+#endif
+
#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 4ab8e13..158cf02 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -379,6 +379,19 @@
#endif
#endif
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 506f50d..bc40b06 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -268,6 +268,13 @@
#define CONFIG_ETHPRIME "FM1@DTSEC3"
#endif
+/* QE */
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+ !defined(CONFIG_QSPI_BOOT)
+#define CONFIG_U_QE
+#endif
+#define CONFIG_SYS_QE_FW_ADDR 0x60600000
+
/* USB */
#define CONFIG_HAS_FSL_XHCI_USB
#ifdef CONFIG_HAS_FSL_XHCI_USB
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index def0a6f..64b82e8 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -264,14 +264,17 @@
"kernel_start=0x581200000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyAMA0,38400n8\0"
+ "console=ttyAMA0,38400n8\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500" \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
- " hugepagesz=2m hugepages=16"
-#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
- "$kernel_size && bootm $kernel_load"
+ " hugepagesz=2m hugepages=256"
+#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \
+ " cp.b $kernel_start $kernel_load" \
+ " $kernel_size && bootm $kernel_load"
#define CONFIG_BOOTDELAY 10
/* Monitor Command Prompt */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index a402c06..dab3820 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -346,7 +346,9 @@
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0"
+ "kernel_size=0x2800000\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 116dbcd..b2c0181 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -327,13 +327,15 @@
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0"
+ "kernel_size=0x2800000\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600" \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
- " hugepagesz=2m hugepages=16"
+ " hugepagesz=2m hugepages=256"
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index 648e48b..500f0f9 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -69,6 +69,7 @@
#define CONFIG_CMD_DFU
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define DFU_MANIFEST_POLL_TIMEOUT 25000
/* THOR */
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index fba2a12..0fc9d1c 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -40,7 +40,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index 97e5d2c..e07fa65 100644
--- a/include/configs/rpi-common.h
+++ b/include/configs/rpi-common.h
@@ -68,6 +68,7 @@
#define CONFIG_FB_ADDR 0
#define CONFIG_VIDEO_BCM2835
#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
new file mode 100644
index 0000000..e1b8bcb
--- /dev/null
+++ b/include/configs/stm32f746-disco.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_RAM_SIZE ((64 + 192) << 10)
+#define CONFIG_SYS_RAM_CS 1
+#define CONFIG_SYS_RAM_FREQ_DIV 2
+#define CONFIG_SYS_RAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR 0x20000000
+#define CONFIG_LOADADDR 0x20000000
+
+#define CONFIG_SYS_MAX_FLASH_SECT 12
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE (8 << 10)
+
+#define CONFIG_STM32_GPIO
+#define CONFIG_STM32X7_SERIAL
+
+#define CONFIG_SYS_CLK_FREQ 16*1000*1000 /* 180 MHz */
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (16 * 1024)
+#define CONFIG_STACKSIZE (64 << 10)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define CONFIG_BOOTCOMMAND \
+ "run bootcmd_romfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
+ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
+ "bootm 0x08044000 - 0x08042000\0"
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMD_MEM
+#define CONFIG_CMD_TIMER
+#undef CONFIG_CMD_IMLS
+#endif /* __CONFIG_H */
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 93e3454..43cf965 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -12,6 +12,7 @@
#ifndef __CONFIG_TSERIES_H__
#define __CONFIG_TSERIES_H__
+#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
@@ -30,6 +31,10 @@
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -204,7 +209,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x8000000
#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
@@ -249,23 +253,15 @@
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#if defined(CONFIG_SPI_BOOT)
/* McSPI IP block */
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_SPL_SPI_SUPPORT
diff --git a/include/dfu.h b/include/dfu.h
index 6118dc2..f39d3f1 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -163,6 +163,31 @@
int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
+/*
+ * dfu_defer_flush - pointer to store dfu_entity for deferred flashing.
+ * It should be NULL when not used.
+ */
+extern struct dfu_entity *dfu_defer_flush;
+/**
+ * dfu_get_defer_flush - get current value of dfu_defer_flush pointer
+ *
+ * @return - value of the dfu_defer_flush pointer
+ */
+static inline struct dfu_entity *dfu_get_defer_flush(void)
+{
+ return dfu_defer_flush;
+}
+
+/**
+ * dfu_set_defer_flush - set the dfu_defer_flush pointer
+ *
+ * @param dfu - pointer to the dfu_entity, which should be written
+ */
+static inline void dfu_set_defer_flush(struct dfu_entity *dfu)
+{
+ dfu_defer_flush = dfu;
+}
+
/**
* dfu_write_from_mem_addr - write data from memory to DFU managed medium
*
diff --git a/include/dm/platform_data/serial_stm32x7.h b/include/dm/platform_data/serial_stm32x7.h
new file mode 100644
index 0000000..328a8a3
--- /dev/null
+++ b/include/dm/platform_data/serial_stm32x7.h
@@ -0,0 +1,17 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SERIAL_STM32x7_H
+#define __SERIAL_STM32x7_H
+
+/* Information about a serial port */
+struct stm32x7_serial_platdata {
+ struct stm32_usart *base; /* address of registers in physical memory */
+ unsigned int clock;
+};
+
+#endif /* __SERIAL_STM32x7_H */
diff --git a/include/fsl_fman.h b/include/fsl_fman.h
index 4d04415..f3e35f8 100644
--- a/include/fsl_fman.h
+++ b/include/fsl_fman.h
@@ -460,4 +460,5 @@
u8 res5[4*1024];
} ccsr_fman_t;
+void fdt_fixup_fman_firmware(void *blob);
#endif /*__FSL_FMAN_H__*/
diff --git a/drivers/qe/qe.h b/include/fsl_qe.h
similarity index 100%
rename from drivers/qe/qe.h
rename to include/fsl_qe.h
diff --git a/include/power/tps65218.h b/include/power/tps65218.h
index 63fc7b3..4d68faa 100644
--- a/include/power/tps65218.h
+++ b/include/power/tps65218.h
@@ -8,6 +8,8 @@
#ifndef __POWER_TPS65218_H__
#define __POWER_TPS65218_H__
+#include <linux/bitops.h>
+
/* I2C chip address */
#define TPS65218_CHIP_PM 0x24
@@ -60,8 +62,18 @@
#define TPS65218_DCDC_VOLT_SEL_1260MV 0x29
#define TPS65218_DCDC_VOLT_SEL_1330MV 0x30
+#define TPS65218_CC_STAT (BIT(0) | BIT(1))
+#define TPS65218_STATE (BIT(2) | BIT(3))
+#define TPS65218_PB_STATE BIT(4)
+#define TPS65218_AC_STATE BIT(5)
+#define TPS65218_EE BIT(6)
+#define TPS65218_FSEAL BIT(7)
+
+int tps65218_reg_read(uchar dest_reg, uchar *dest_val);
int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
uchar mask);
int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel);
+int tps65218_toggle_fseal(void);
+int tps65218_lock_fseal(void);
int power_tps65218_init(unsigned char bus);
#endif /* __POWER_TPS65218_H__ */
diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py
index bc2bd76..d6502c6 100644
--- a/test/py/u_boot_console_base.py
+++ b/test/py/u_boot_console_base.py
@@ -303,8 +303,13 @@
if not self.config.gdbserver:
self.p.timeout = 30000
self.p.logfile_read = self.logstream
- if self.config.buildconfig.get('config_spl', False) == 'y':
- m = self.p.expect([pattern_u_boot_spl_signon] + self.bad_patterns)
+ bcfg = self.config.buildconfig
+ config_spl = bcfg.get('config_spl', 'n') == 'y'
+ config_spl_serial_support = bcfg.get('config_spl_serial_support',
+ 'n') == 'y'
+ if config_spl and config_spl_serial_support:
+ m = self.p.expect([pattern_u_boot_spl_signon] +
+ self.bad_patterns)
if m != 0:
raise Exception('Bad pattern found on console: ' +
self.bad_pattern_ids[m - 1])
diff --git a/tools/Makefile b/tools/Makefile
index 1382b05..2881a7c 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -129,6 +129,14 @@
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),)
HOSTLOADLIBES_mkimage += \
$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
+
+# OS X deprecate openssl in favour of CommonCrypto, supress deprecation
+# warnings on those systems
+ifeq ($(HOSTOS),darwin)
+HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
+HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
+HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
+endif
endif
HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage)
diff --git a/tools/buildman/README b/tools/buildman/README
index 66502af..6f41008 100644
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -157,7 +157,7 @@
x86: i386
blackfin: bfin
nds32: nds32le
-openrisc: or32
+openrisc: or1k
This selects the available toolchain paths. Add the base directory for
@@ -362,6 +362,10 @@
sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
+Note openrisc kernel.org toolchain is out of date, download latest one from
+http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions, eg:
+ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/gcc-or1k-elf-4.8.1-x86.tar.bz2.
+
Buildman should now be set up to use your new toolchain.
At the time of writing, U-Boot has these architectures:
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 8f8b6df..facebcd 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -129,7 +129,7 @@
case 'a':
if (--argc <= 0)
usage ();
- params.addr = strtoul (*++argv, &ptr, 16);
+ params.addr = strtoull(*++argv, &ptr, 16);
if (*ptr) {
fprintf (stderr,
"%s: invalid load address %s\n",
@@ -146,7 +146,7 @@
case 'e':
if (--argc <= 0)
usage ();
- params.ep = strtoul (*++argv, &ptr, 16);
+ params.ep = strtoull(*++argv, &ptr, 16);
if (*ptr) {
fprintf (stderr,
"%s: invalid entry point %s\n",
diff --git a/tools/moveconfig.py b/tools/moveconfig.py
index 1b53f95..6f71b55 100755
--- a/tools/moveconfig.py
+++ b/tools/moveconfig.py
@@ -184,6 +184,9 @@
# nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz
# nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545
# sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
+#
+# openrisc kernel.org toolchain is out of date, download latest one from
+# http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions
CROSS_COMPILE = {
'arc': 'arc-linux-',
'aarch64': 'aarch64-linux-',
@@ -195,7 +198,7 @@
'mips': 'mips-linux-',
'nds32': 'nds32le-linux-',
'nios2': 'nios2-linux-gnu-',
- 'openrisc': 'or32-linux-',
+ 'openrisc': 'or1k-elf-',
'powerpc': 'powerpc-linux-',
'sh': 'sh-linux-gnu-',
'sparc': 'sparc-linux-',