vpl: Add Kconfig options for VPL
Add VPL versions of commonly used Kconfig options.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index be09866..84f2847 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -189,6 +189,13 @@
spl_board_init() from board_init_r(). This function should be
provided by the board.
+config VPL_BOARD_INIT
+ bool "Call board-specific initialization in VPL"
+ help
+ If this option is enabled, U-Boot will call the function
+ spl_board_init() from board_init_r(). This function should be
+ provided by the board.
+
config SPL_BOOTROM_SUPPORT
bool "Support returning to the BOOTROM"
help
@@ -1632,6 +1639,218 @@
endif # TPL
+config VPL
+ bool
+ depends on SUPPORT_SPL
+ prompt "Enable VPL"
+ help
+ If you want to build VPL as well as the normal image, TPL and SPL,
+ say Y.
+
+if VPL
+
+config VPL_BANNER_PRINT
+ bool "Enable output of the VPL banner 'U-Boot VPL ...'"
+ depends on VPL
+ default y
+ help
+ If this option is enabled, VPL will print the banner with version
+ info. Disabling this option could be useful to reduce VPL boot time
+ (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
+
+config VPL_BOARD_INIT
+ bool "Call board-specific initialization in VPL"
+ help
+ If this option is enabled, U-Boot will call the function
+ spl_board_init() from board_init_r(). This function should be
+ provided by the board.
+
+config VPL_CACHE
+ depends on CACHE
+ bool "Support cache drivers in VPL"
+ help
+ Enable support for cache drivers in VPL.
+
+config VPL_CRC32
+ bool "Support CRC32 in VPL"
+ default y if VPL_ENV_SUPPORT || VPL_BLOBLIST
+ help
+ Enable this to support CRC32 in uImages or FIT images within VPL.
+ This is a 32-bit checksum value that can be used to verify images.
+ For FIT images, this is the least secure type of checksum, suitable
+ for detected accidental image corruption. For secure applications you
+ should consider SHA1 or SHA256.
+
+config VPL_DM_SPI
+ bool "Support SPI DM drivers in VPL"
+ help
+ Enable support for SPI DM drivers in VPL.
+
+config VPL_DM_SPI_FLASH
+ bool "Support SPI DM FLASH drivers in VPL"
+ help
+ Enable support for SPI DM flash drivers in VPL.
+
+config VPL_FRAMEWORK
+ bool "Support VPL based upon the common SPL framework"
+ default y
+ help
+ Enable the SPL framework under common/spl/ for VPL builds.
+ This framework supports MMC, NAND and YMODEM and other methods
+ loading of U-Boot's next stage. If unsure, say Y.
+
+config VPL_HANDOFF
+ bool "Pass hand-off information from VPL to SPL"
+ depends on HANDOFF && VPL_BLOBLIST
+ default y
+ help
+ This option enables VPL to write handoff information. This can be
+ used to pass information like the size of SDRAM from VPL to SPL. Also
+ VPL can receive information from TPL in the same place if that is
+ enabled.
+
+config VPL_LIBCOMMON_SUPPORT
+ bool "Support common libraries"
+ default y if SPL_LIBCOMMON_SUPPORT
+ help
+ Enable support for common U-Boot libraries within VPL. See
+ SPL_LIBCOMMON_SUPPORT for details.
+
+config VPL_LIBGENERIC_SUPPORT
+ bool "Support generic libraries"
+ default y if SPL_LIBGENERIC_SUPPORT
+ help
+ Enable support for generic U-Boot libraries within VPL. These
+ libraries include generic code to deal with device tree, hashing,
+ printf(), compression and the like. This option is enabled on many
+ boards. Enable this option to build the code in lib/ as part of a
+ VPL build.
+
+config VPL_DRIVERS_MISC
+ bool "Support misc drivers"
+ default y if TPL_DRIVERS_MISC
+ help
+ Enable miscellaneous drivers in VPL. These drivers perform various
+ tasks that don't fall nicely into other categories, Enable this
+ option to build the drivers in drivers/misc as part of a VPL
+ build, for those that support building in VPL (not all drivers do).
+
+config VPL_ENV_SUPPORT
+ bool "Support an environment"
+ help
+ Enable environment support in VPL. The U-Boot environment provides
+ a number of settings (essentially name/value pairs) which can
+ control many aspects of U-Boot's operation. Enabling this option will
+ make env_get() and env_set() available in VSPL.
+
+config VPL_GPIO
+ bool "Support GPIO in VPL"
+ default y if SPL_GPIO
+ help
+ Enable support for GPIOs (General-purpose Input/Output) in VPL.
+ GPIOs allow U-Boot to read the state of an input line (high or
+ low) and set the state of an output line. This can be used to
+ drive LEDs, control power to various system parts and read user
+ input. GPIOs can be useful in VPL to enable a 'sign-of-life' LED,
+ for example. Enable this option to build the drivers in
+ drivers/gpio as part of a VPL build.
+
+config VPL_HANDOFF
+ bool "Pass hand-off information from VPL to SPL and U-Boot proper"
+ depends on HANDOFF && VPL_BLOBLIST
+ default y
+ help
+ This option enables VPL to write handoff information. This can be
+ used to pass information like the size of SDRAM from VPL to U-Boot
+ proper. The information is also available to VPL if it is useful
+ there.
+
+config VPL_HASH
+ bool "Support hashing drivers in VPL"
+ depends on VPL
+ select SHA1
+ select SHA256
+ help
+ Enable hashing drivers in VPL. These drivers can be used to
+ accelerate secure boot processing in secure applications. Enable
+ this option to build system-specific drivers for hash acceleration
+ as part of a VPL build.
+
+config VPL_I2C_SUPPORT
+ bool "Support I2C in VPL"
+ default y if SPL_I2C_SUPPORT
+ help
+ Enable support for the I2C bus in VPL. Vee SPL_I2C_SUPPORT for
+ details.
+
+config VPL_PCH_SUPPORT
+ bool "Support PCH drivers"
+ default y if TPL_PCH_SUPPORT
+ help
+ Enable support for PCH (Platform Controller Hub) devices in VPL.
+ These are used to set up GPIOs and the SPI peripheral early in
+ boot. This enables the drivers in drivers/pch as part of a VPL
+ build.
+
+config VPL_PCI
+ bool "Support PCI drivers"
+ default y if SPL_PCI
+ help
+ Enable support for PCI in VPL. For platforms that need PCI to boot,
+ or must perform some init using PCI in VPL, this provides the
+ necessary driver support. This enables the drivers in drivers/pci
+ as part of a VPL build.
+
+config VPL_RTC
+ bool "Support RTC drivers"
+ help
+ Enable RTC (Real-time Clock) support in VPL. This includes support
+ for reading and setting the time. Some RTC devices also have some
+ non-volatile (battery-backed) memory which is accessible if
+ needed. This enables the drivers in drivers/rtc as part of a VPL
+ build.
+
+config VPL_SERIAL
+ bool "Support serial"
+ default y if TPL_SERIAL
+ select VPL_PRINTF
+ select VPL_STRTO
+ help
+ Enable support for serial in VPL. See SPL_SERIAL_SUPPORT for
+ details.
+
+config VPL_SIZE_LIMIT
+ hex "Maximum size of VPL image"
+ depends on VPL
+ default 0x0
+ help
+ Specifies the maximum length of the U-Boot VPL image.
+ If this value is zero, it is ignored.
+
+config VPL_SPI
+ bool "Support SPI drivers"
+ help
+ Enable support for using SPI in VPL. See SPL_SPI_SUPPORT for
+ details.
+
+config VPL_SPI_FLASH_SUPPORT
+ bool "Support SPI flash drivers"
+ help
+ Enable support for using SPI flash in VPL, and loading U-Boot from
+ SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
+ the SPI bus that is used to connect it to a system. It is a simple
+ but fast bidirectional 4-wire bus (clock, chip select and two data
+ lines). This enables the drivers in drivers/mtd/spi as part of a
+ VPL build. This normally requires VPL_SPI_SUPPORT.
+
+config VPL_TEXT_BASE
+ hex "VPL Text Base"
+ default 0x0
+ help
+ The address in memory that VPL will be running from.
+
+endif # VPL
+
config SPL_AT91_MCK_BYPASS
bool "Use external clock signal as a source of main clock for AT91 platforms"
depends on ARCH_AT91