pxa: move mmc drivers to drivers/mmc
introduce new macro CONFIG_PXA_MMC to activate it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 9f7f0ff..001b48a 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -34,7 +34,6 @@
#ifdef CONFIG_LCD
#define CONFIG_SHARP_LM8V31
#endif
-/* #define CONFIG_MMC 1 */
#define BOARD_LATE_INIT 1
#undef CONFIG_SKIP_RELOCATE_UBOOT
@@ -181,7 +180,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/* #define CONFIG_SYS_MMC_BASE 0xF0000000 */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
/*
* Stack sizes
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 80cf44f..69774d7 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -40,7 +40,7 @@
#ifdef CONFIG_LCD
#define CONFIG_SHARP_LM8V31
#endif
-#define CONFIG_MMC 1
+#define CONFIG_MMC
#define BOARD_LATE_INIT 1
#define CONFIG_DOS_PARTITION
@@ -83,7 +83,6 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
@@ -133,7 +132,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
/*
* Stack sizes
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index 23398e3..59741a9 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -132,6 +132,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#endif
+
/*
* Stack sizes
*
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index fa53cf4..d1c2c65 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -119,7 +119,6 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_DHCP
@@ -249,7 +248,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
/*
* Stack sizes
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index e124be4..70e5ce9 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -79,7 +79,6 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IMLS
#define CONFIG_CMD_PING
@@ -174,7 +173,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
/*
* Stack sizes
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 2fca956..6761438 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -115,7 +115,6 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_PING
#define CONFIG_CMD_JFFS2
@@ -142,9 +141,14 @@
#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
+
/* Stack sizes - The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 58f35a9..6febeea 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -41,7 +41,7 @@
#ifdef CONFIG_LCD
#define CONFIG_SHARP_LM8V31
#endif
-/* #define CONFIG_MMC 1 */
+#undef CONFIG_MMC
#define BOARD_LATE_INIT 1
#undef CONFIG_SKIP_RELOCATE_UBOOT
@@ -152,7 +152,11 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/* #define CONFIG_SYS_MMC_BASE 0xF0000000 */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#endif
/*
* Stack sizes