ARM: imx: Perform plain boot in altbootcmd on Data Modul i.MX8M Mini/Plus eDM SBC
The current A/B switching preparatory altbootcmd is confusing
to users, replace it with plain 'run bootcmd' which can be
replaced by proper A/B switching altbootcmd when the matching
updater is added on top of the platform. By default, keep the
boot counter incrementing, but do not do any A/B partition
switching.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index d323f84..57ecb5e 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -34,7 +34,7 @@
#define CFG_SYS_FSL_ESDHC_ADDR 0
#define CFG_EXTRA_ENV_SETTINGS \
- "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
+ "altbootcmd=run bootcmd\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \
diff --git a/include/configs/imx8mp_data_modul_edm_sbc.h b/include/configs/imx8mp_data_modul_edm_sbc.h
index f953847..de5bdd3 100644
--- a/include/configs/imx8mp_data_modul_edm_sbc.h
+++ b/include/configs/imx8mp_data_modul_edm_sbc.h
@@ -24,7 +24,7 @@
#define FEC_QUIRK_ENET_MAC
#define CFG_EXTRA_ENV_SETTINGS \
- "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
+ "altbootcmd=run bootcmd\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \