cgtqmx6eval: Add Ethernet support
cgtqmx6eval can be populated with a AR8035 or KSZ9031 depending on the
board revision.
Add Ethernet support.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index fb5b82e..92930c8 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -97,6 +97,19 @@
#define CONFIG_LBA48
#define CONFIG_LIBATA
+/* Ethernet */
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
/* Command definition */
#define CONFIG_MXC_UART_BASE UART2_BASE
diff --git a/include/micrel.h b/include/micrel.h
index 04c9ecf..e6d145d 100644
--- a/include/micrel.h
+++ b/include/micrel.h
@@ -20,6 +20,10 @@
#define MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW 0x6
#define MII_KSZ9031_EXT_RGMII_CLOCK_SKEW 0x8
+/* Registers */
+#define MMD_ACCESS_CONTROL 0xd
+#define MMD_ACCESS_REG_DATA 0xe
+
struct phy_device;
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val);
int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum);