x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME
At present this enables a few arch-specific members of the global_data
struct which are otherwise not part of the struct. As a result we have to
use #ifdef in various places.
The cost of always having these in the struct is small. Adjust things so
that we can use compile-time code instead of #ifdefs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c
index 707ceb3..9f32f2e 100644
--- a/arch/x86/cpu/apollolake/cpu_spl.c
+++ b/arch/x86/cpu/apollolake/cpu_spl.c
@@ -247,12 +247,13 @@
ret = pmc_init(pmc);
if (ret < 0)
return log_msg_ret("Could not init PMC", ret);
-#ifdef CONFIG_HAVE_ACPI_RESUME
- ret = pmc_prev_sleep_state(pmc);
- if (ret < 0)
- return log_msg_ret("Could not get PMC sleep state", ret);
- gd->arch.prev_sleep_state = ret;
-#endif
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ ret = pmc_prev_sleep_state(pmc);
+ if (ret < 0)
+ return log_msg_ret("Could not get PMC sleep state",
+ ret);
+ gd->arch.prev_sleep_state = ret;
+ }
return 0;
}
diff --git a/arch/x86/cpu/apollolake/fsp_s.c b/arch/x86/cpu/apollolake/fsp_s.c
index 767ddfe..13e6b20 100644
--- a/arch/x86/cpu/apollolake/fsp_s.c
+++ b/arch/x86/cpu/apollolake/fsp_s.c
@@ -192,16 +192,16 @@
int arch_fsp_init_r(void)
{
-#ifdef CONFIG_HAVE_ACPI_RESUME
- bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
-#else
- bool s3wake = false;
-#endif
+ bool s3wake;
struct udevice *dev, *itss;
int ret;
if (!ll_boot_init())
return 0;
+
+ s3wake = IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) &&
+ gd->arch.prev_sleep_state == ACPI_S3;
+
/*
* This must be called before any devices are probed. Put any probing
* into arch_fsps_preinit() above.
diff --git a/arch/x86/cpu/baytrail/acpi.c b/arch/x86/cpu/baytrail/acpi.c
index 65f2006..b17bc62 100644
--- a/arch/x86/cpu/baytrail/acpi.c
+++ b/arch/x86/cpu/baytrail/acpi.c
@@ -161,7 +161,6 @@
gnvs->iuart_en = 0;
}
-#ifdef CONFIG_HAVE_ACPI_RESUME
/*
* The following two routines are called at a very early stage, even before
* FSP 2nd phase API fsp_init() is called. Registers off ACPI_BASE_ADDRESS
@@ -204,4 +203,3 @@
pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
outl(pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT);
}
-#endif
diff --git a/arch/x86/cpu/broadwell/power_state.c b/arch/x86/cpu/broadwell/power_state.c
index 99d6f72..62fd2e8 100644
--- a/arch/x86/cpu/broadwell/power_state.c
+++ b/arch/x86/cpu/broadwell/power_state.c
@@ -23,11 +23,10 @@
if (ps->pm1_sts & WAK_STS) {
switch ((ps->pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) {
-#if CONFIG_HAVE_ACPI_RESUME
case SLP_TYP_S3:
- prev_sleep_state = SLEEP_STATE_S3;
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME))
+ prev_sleep_state = SLEEP_STATE_S3;
break;
-#endif
case SLP_TYP_S5:
prev_sleep_state = SLEEP_STATE_S5;
break;
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index a814e7d..23a4d63 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -163,10 +163,10 @@
cpu_has_64bit() ? "x86_64" : "x86",
cpu_vendor_name(gd->arch.x86_vendor), gd->arch.x86_device);
-#ifdef CONFIG_HAVE_ACPI_RESUME
- debug("ACPI previous sleep state: %s\n",
- acpi_ss_string(gd->arch.prev_sleep_state));
-#endif
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ debug("ACPI previous sleep state: %s\n",
+ acpi_ss_string(gd->arch.prev_sleep_state));
+ }
return 0;
}
@@ -191,12 +191,12 @@
board_final_cleanup();
-#ifdef CONFIG_HAVE_ACPI_RESUME
- fadt = acpi_find_fadt();
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ fadt = acpi_find_fadt();
- if (fadt && gd->arch.prev_sleep_state == ACPI_S3)
- acpi_resume(fadt);
-#endif
+ if (fadt && gd->arch.prev_sleep_state == ACPI_S3)
+ acpi_resume(fadt);
+ }
write_tables();
@@ -277,17 +277,17 @@
high_table_reserve();
#endif
-#ifdef CONFIG_HAVE_ACPI_RESUME
- acpi_s3_reserve();
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ acpi_s3_reserve();
-#ifdef CONFIG_HAVE_FSP
- /*
- * Save stack address to CMOS so that at next S3 boot,
- * we can use it as the stack address for fsp_contiue()
- */
- fsp_save_s3_stack();
-#endif /* CONFIG_HAVE_FSP */
-#endif /* CONFIG_HAVE_ACPI_RESUME */
+ if (IS_ENABLED(CONFIG_HAVE_FSP)) {
+ /*
+ * Save stack address to CMOS so that at next S3 boot,
+ * we can use it as the stack address for fsp_contiue()
+ */
+ fsp_save_s3_stack();
+ }
+ }
return 0;
}
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 4aee2f3..0e64c8a 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -116,10 +116,8 @@
u32 high_table_ptr;
u32 high_table_limit;
#endif
-#ifdef CONFIG_HAVE_ACPI_RESUME
int prev_sleep_state; /* Previous sleep state ACPI_S0/1../5 */
ulong backup_mem; /* Backup memory address for S3 */
-#endif
#ifdef CONFIG_FSP_VERSION2
struct fsp_header *fsp_s_hdr; /* Pointer to FSP-S header */
#endif
diff --git a/arch/x86/lib/coreboot_table.c b/arch/x86/lib/coreboot_table.c
index 331c1b7..6cd3244 100644
--- a/arch/x86/lib/coreboot_table.c
+++ b/arch/x86/lib/coreboot_table.c
@@ -21,11 +21,11 @@
gd->arch.high_table_ptr = gd->start_addr_sp;
/* clear the memory */
-#ifdef CONFIG_HAVE_ACPI_RESUME
- if (gd->arch.prev_sleep_state != ACPI_S3)
-#endif
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) &&
+ gd->arch.prev_sleep_state != ACPI_S3) {
memset((void *)gd->arch.high_table_ptr, 0,
CONFIG_HIGH_TABLE_SIZE);
+ }
gd->start_addr_sp &= ~0xf;
diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c
index cf32b3e..8e3082d 100644
--- a/arch/x86/lib/fsp/fsp_common.c
+++ b/arch/x86/lib/fsp/fsp_common.c
@@ -60,7 +60,6 @@
debug("OK\n");
}
-#ifdef CONFIG_HAVE_ACPI_RESUME
int fsp_save_s3_stack(void)
{
struct udevice *dev;
@@ -84,4 +83,3 @@
return 0;
}
-#endif
diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c
index ad5a0f7..01d498c 100644
--- a/arch/x86/lib/fsp/fsp_dram.c
+++ b/arch/x86/lib/fsp/fsp_dram.c
@@ -117,17 +117,21 @@
entries[num_entries].type = E820_RESERVED;
num_entries++;
-#ifdef CONFIG_HAVE_ACPI_RESUME
- /*
- * Everything between U-Boot's stack and ram top needs to be
- * reserved in order for ACPI S3 resume to work.
- */
- entries[num_entries].addr = gd->start_addr_sp - CONFIG_STACK_SIZE;
- entries[num_entries].size = gd->ram_top - gd->start_addr_sp +
- CONFIG_STACK_SIZE;
- entries[num_entries].type = E820_RESERVED;
- num_entries++;
-#endif
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ ulong stack_size;
+
+ stack_size = CONFIG_IS_ENABLED(HAVE_ACPI_RESUME,
+ (CONFIG_STACK_SIZE), (0));
+ /*
+ * Everything between U-Boot's stack and ram top needs to be
+ * reserved in order for ACPI S3 resume to work.
+ */
+ entries[num_entries].addr = gd->start_addr_sp - stack_size;
+ entries[num_entries].size = gd->ram_top - gd->start_addr_sp +
+ stack_size;
+ entries[num_entries].type = E820_RESERVED;
+ num_entries++;
+ }
return num_entries;
}
diff --git a/arch/x86/lib/fsp1/fsp_common.c b/arch/x86/lib/fsp1/fsp_common.c
index 43d32b7..da351cf 100644
--- a/arch/x86/lib/fsp1/fsp_common.c
+++ b/arch/x86/lib/fsp1/fsp_common.c
@@ -46,10 +46,12 @@
void *nvs;
int stack = CONFIG_FSP_TEMP_RAM_ADDR;
int boot_mode = BOOT_FULL_CONFIG;
-#ifdef CONFIG_HAVE_ACPI_RESUME
- int prev_sleep_state = chipset_prev_sleep_state();
- gd->arch.prev_sleep_state = prev_sleep_state;
-#endif
+ int prev_sleep_state;
+
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) {
+ prev_sleep_state = chipset_prev_sleep_state();
+ gd->arch.prev_sleep_state = prev_sleep_state;
+ }
if (!gd->arch.hob_list) {
if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE))
@@ -57,8 +59,8 @@
else
nvs = NULL;
-#ifdef CONFIG_HAVE_ACPI_RESUME
- if (prev_sleep_state == ACPI_S3) {
+ if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) &&
+ prev_sleep_state == ACPI_S3) {
if (nvs == NULL) {
/* If waking from S3 and no cache then */
debug("No MRC cache found in S3 resume path\n");
@@ -79,7 +81,7 @@
stack = cmos_read32(CMOS_FSP_STACK_ADDR);
boot_mode = BOOT_ON_S3_RESUME;
}
-#endif
+
/*
* The first time we enter here, call fsp_init().
* Note the execution does not return to this function,
diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c
index 1c82b81..c9f6402 100644
--- a/arch/x86/lib/fsp2/fsp_dram.c
+++ b/arch/x86/lib/fsp2/fsp_dram.c
@@ -27,11 +27,10 @@
return 0;
}
if (spl_phase() == PHASE_SPL) {
-#ifdef CONFIG_HAVE_ACPI_RESUME
- bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
-#else
bool s3wake = false;
-#endif
+
+ s3wake = IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) &&
+ gd->arch.prev_sleep_state == ACPI_S3;
ret = fsp_memory_init(s3wake,
IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH));