* Some code cleanup
* Patch by Josef Baumgartner, 10 Feb 2004:
Fixes for Coldfire port
* Patch by Brad Kemp, 11 Feb 2004:
Fix CFI flash driver problems
diff --git a/CHANGELOG b/CHANGELOG
index 6c853c1..da8c2a9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,9 +2,17 @@
Changes since U-Boot 1.0.1:
======================================================================
+* Some code cleanup
+
+* Patch by Josef Baumgartner, 10 Feb 2004:
+ Fixes for Coldfire port
+
+* Patch by Brad Kemp, 11 Feb 2004:
+ Fix CFI flash driver problems
+
* Make sure to use a bus clock divider of 2 only when running TQM8xxM
modules at CPU clock frequencies above 66 MHz.
-
+
* Optimize flash programming speed for LWMON (by another 100% :-)
* Patch by Jian Zhang, 3 Feb 2004:
diff --git a/Makefile b/Makefile
index 56c84ec..965b93d 100644
--- a/Makefile
+++ b/Makefile
@@ -833,10 +833,10 @@
#########################################################################
M5272C3_config : unconfig
- @./mkconfig $(@:_config=) m68k coldfire m5272c3
+ @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
M5282EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k coldfire m5282evb
+ @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
#########################################################################
## MPC85xx Systems
diff --git a/board/bmw/flash.c b/board/bmw/flash.c
index e04af97..7fba174 100644
--- a/board/bmw/flash.c
+++ b/board/bmw/flash.c
@@ -29,7 +29,7 @@
#define ROM_CS0_START 0xFF800000
#define ROM_CS1_START 0xFF000000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CFG_ENV_IS_IN_FLASH)
# ifndef CFG_ENV_ADDR
@@ -46,9 +46,10 @@
/*-----------------------------------------------------------------------
* Functions
*/
-static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
+
#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
#endif /* 0 */
/*flash command address offsets*/
@@ -69,289 +70,305 @@
*/
#if 0
-static int byte_parity_odd(unsigned char x) __attribute__ ((const));
+static int byte_parity_odd (unsigned char x) __attribute__ ((const));
#endif /* 0 */
-static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
+static unsigned long flash_id (unsigned char mfct, unsigned char chip)
+ __attribute__ ((const));
-typedef struct
-{
- FLASH_WORD_SIZE extval;
- unsigned short intval;
+typedef struct {
+ FLASH_WORD_SIZE extval;
+ unsigned short intval;
} map_entry;
#if 0
-static int
-byte_parity_odd(unsigned char x)
+static int byte_parity_odd (unsigned char x)
{
- x ^= x >> 4;
- x ^= x >> 2;
- x ^= x >> 1;
- return (x & 0x1) != 0;
+ x ^= x >> 4;
+ x ^= x >> 2;
+ x ^= x >> 1;
+ return (x & 0x1) != 0;
}
#endif /* 0 */
-static unsigned long
-flash_id(unsigned char mfct, unsigned char chip)
+static unsigned long flash_id (unsigned char mfct, unsigned char chip)
{
- static const map_entry mfct_map[] =
- {
- {(FLASH_WORD_SIZE) AMD_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
- {(FLASH_WORD_SIZE) FUJ_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
- {(FLASH_WORD_SIZE) STM_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
- {(FLASH_WORD_SIZE) MT_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
- {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
- {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
- };
+ static const map_entry mfct_map[] = {
+ {(FLASH_WORD_SIZE) AMD_MANUFACT,
+ (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
+ {(FLASH_WORD_SIZE) FUJ_MANUFACT,
+ (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
+ {(FLASH_WORD_SIZE) STM_MANUFACT,
+ (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
+ {(FLASH_WORD_SIZE) MT_MANUFACT,
+ (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
+ {(FLASH_WORD_SIZE) INTEL_MANUFACT,
+ (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
+ {(FLASH_WORD_SIZE) INTEL_ALT_MANU,
+ (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
+ };
- static const map_entry chip_map[] =
- {
- {AMD_ID_F040B, FLASH_AM040},
- {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
- };
+ static const map_entry chip_map[] = {
+ {AMD_ID_F040B, FLASH_AM040},
+ {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
+ };
- const map_entry *p;
- unsigned long result = FLASH_UNKNOWN;
+ const map_entry *p;
+ unsigned long result = FLASH_UNKNOWN;
- /* find chip id */
- for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
- if(p->extval == chip)
- {
- result = FLASH_VENDMASK | p->intval;
- break;
- }
+ /* find chip id */
+ for (p = &chip_map[0];
+ p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
+ if (p->extval == chip) {
+ result = FLASH_VENDMASK | p->intval;
+ break;
+ }
- /* find vendor id */
- for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
- if(p->extval == mfct)
- {
- result &= ~FLASH_VENDMASK;
- result |= (unsigned long) p->intval << 16;
- break;
- }
+ /* find vendor id */
+ for (p = &mfct_map[0];
+ p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
+ if (p->extval == mfct) {
+ result &= ~FLASH_VENDMASK;
+ result |= (unsigned long) p->intval << 16;
+ break;
+ }
- return result;
+ return result;
}
-unsigned long
-flash_init(void)
+unsigned long flash_init (void)
{
- unsigned long i;
- unsigned char j;
- static const ulong flash_banks[] = CFG_FLASH_BANKS;
+ unsigned long i;
+ unsigned char j;
+ static const ulong flash_banks[] = CFG_FLASH_BANKS;
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
- {
- flash_info_t * const pflinfo = &flash_info[i];
- pflinfo->flash_id = FLASH_UNKNOWN;
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- }
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ flash_info_t *const pflinfo = &flash_info[i];
- for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
- {
- flash_info_t * const pflinfo = &flash_info[i];
- const unsigned long base_address = flash_banks[i];
- volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
+ pflinfo->flash_id = FLASH_UNKNOWN;
+ pflinfo->size = 0;
+ pflinfo->sector_count = 0;
+ }
+
+ for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) {
+ flash_info_t *const pflinfo = &flash_info[i];
+ const unsigned long base_address = flash_banks[i];
+ volatile FLASH_WORD_SIZE *const flash =
+ (FLASH_WORD_SIZE *) base_address;
#if 0
- volatile FLASH_WORD_SIZE * addr2;
+ volatile FLASH_WORD_SIZE *addr2;
#endif
#if 0
- /* write autoselect sequence */
- flash[0x5555] = 0xaa;
- flash[0x2aaa] = 0x55;
- flash[0x5555] = 0x90;
+ /* write autoselect sequence */
+ flash[0x5555] = 0xaa;
+ flash[0x2aaa] = 0x55;
+ flash[0x5555] = 0x90;
#else
- flash[0xAAA << (3 * i)] = 0xaa;
- flash[0x555 << (3 * i)] = 0x55;
- flash[0xAAA << (3 * i)] = 0x90;
+ flash[0xAAA << (3 * i)] = 0xaa;
+ flash[0x555 << (3 * i)] = 0x55;
+ flash[0xAAA << (3 * i)] = 0x90;
#endif
- __asm__ __volatile__("sync");
+ __asm__ __volatile__ ("sync");
#if 0
- pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
+ pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]);
#else
- pflinfo->flash_id = flash_id(flash[0x0], flash[0x2 + 14 * i]);
+ pflinfo->flash_id =
+ flash_id (flash[0x0], flash[0x2 + 14 * i]);
#endif
- switch(pflinfo->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 8;
- for(j = 0; j < 8; j++)
- {
- pflinfo->start[j] = base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_STM800AB:
- pflinfo->size = 0x00100000;
- pflinfo->sector_count = 19;
- pflinfo->start[0] = base_address;
- pflinfo->start[1] = base_address + 0x4000;
- pflinfo->start[2] = base_address + 0x6000;
- pflinfo->start[3] = base_address + 0x8000;
- for(j = 1; j < 16; j++)
- {
- pflinfo->start[j+3] = base_address + 0x00010000 * j;
- }
+ switch (pflinfo->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ pflinfo->size = 0x00080000;
+ pflinfo->sector_count = 8;
+ for (j = 0; j < 8; j++) {
+ pflinfo->start[j] =
+ base_address + 0x00010000 * j;
+ pflinfo->protect[j] = flash[(j << 16) | 0x2];
+ }
+ break;
+ case FLASH_STM800AB:
+ pflinfo->size = 0x00100000;
+ pflinfo->sector_count = 19;
+ pflinfo->start[0] = base_address;
+ pflinfo->start[1] = base_address + 0x4000;
+ pflinfo->start[2] = base_address + 0x6000;
+ pflinfo->start[3] = base_address + 0x8000;
+ for (j = 1; j < 16; j++) {
+ pflinfo->start[j + 3] =
+ base_address + 0x00010000 * j;
+ }
#if 0
- /* check for protected sectors */
- for (j = 0; j < pflinfo->sector_count; j++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
- if (pflinfo->flash_id & FLASH_MAN_SST)
- pflinfo->protect[j] = 0;
- else
- pflinfo->protect[j] = addr2[2] & 1;
- }
+ /* check for protected sectors */
+ for (j = 0; j < pflinfo->sector_count; j++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE
+ *) (pflinfo->start[j]);
+ if (pflinfo->flash_id & FLASH_MAN_SST)
+ pflinfo->protect[j] = 0;
+ else
+ pflinfo->protect[j] = addr2[2] & 1;
+ }
#endif
- break;
- }
- /* Protect monitor and environment sectors
- */
+ break;
+ }
+ /* Protect monitor and environment sectors
+ */
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
#endif
#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
#endif
- /* reset device to read mode */
- flash[0x0000] = 0xf0;
- __asm__ __volatile__("sync");
- }
+ /* reset device to read mode */
+ flash[0x0000] = 0xf0;
+ __asm__ __volatile__ ("sync");
+ }
- return flash_info[0].size + flash_info[1].size;
+ return flash_info[0].size + flash_info[1].size;
}
#if 0
-static void
-flash_get_offsets (ulong base, flash_info_t *info)
+static void flash_get_offsets (ulong base, flash_info_t * info)
{
- int i;
+ int i;
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_MAN_SST) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
- }
}
#endif /* 0 */
/*-----------------------------------------------------------------------
*/
-void
-flash_print_info(flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
+ static const char unk[] = "Unknown";
+ const char *mfct = unk, *type = unk;
+ unsigned int i;
- if(info->flash_id != FLASH_UNKNOWN)
- {
- switch(info->flash_id & FLASH_VENDMASK)
- {
- case FLASH_MAN_AMD: mfct = "AMD"; break;
- case FLASH_MAN_FUJ: mfct = "FUJITSU"; break;
- case FLASH_MAN_STM: mfct = "STM"; break;
- case FLASH_MAN_SST: mfct = "SST"; break;
- case FLASH_MAN_BM: mfct = "Bright Microelectonics"; break;
- case FLASH_MAN_INTEL: mfct = "Intel"; break;
- }
+ if (info->flash_id != FLASH_UNKNOWN) {
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ mfct = "AMD";
+ break;
+ case FLASH_MAN_FUJ:
+ mfct = "FUJITSU";
+ break;
+ case FLASH_MAN_STM:
+ mfct = "STM";
+ break;
+ case FLASH_MAN_SST:
+ mfct = "SST";
+ break;
+ case FLASH_MAN_BM:
+ mfct = "Bright Microelectonics";
+ break;
+ case FLASH_MAN_INTEL:
+ mfct = "Intel";
+ break;
+ }
- switch(info->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM040: type = "AM29F040B (512K * 8, uniform sector size)"; break;
- case FLASH_AM400B: type = "AM29LV400B (4 Mbit, bottom boot sect)"; break;
- case FLASH_AM400T: type = "AM29LV400T (4 Mbit, top boot sector)"; break;
- case FLASH_AM800B: type = "AM29LV800B (8 Mbit, bottom boot sect)"; break;
- case FLASH_AM800T: type = "AM29LV800T (8 Mbit, top boot sector)"; break;
- case FLASH_AM160T: type = "AM29LV160T (16 Mbit, top boot sector)"; break;
- case FLASH_AM320B: type = "AM29LV320B (32 Mbit, bottom boot sect)"; break;
- case FLASH_AM320T: type = "AM29LV320T (32 Mbit, top boot sector)"; break;
- case FLASH_STM800AB: type = "M29W800AB (8 Mbit, bottom boot sect)"; break;
- case FLASH_SST800A: type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; break;
- case FLASH_SST160A: type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; break;
- }
- }
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ type = "AM29F040B (512K * 8, uniform sector size)";
+ break;
+ case FLASH_AM400B:
+ type = "AM29LV400B (4 Mbit, bottom boot sect)";
+ break;
+ case FLASH_AM400T:
+ type = "AM29LV400T (4 Mbit, top boot sector)";
+ break;
+ case FLASH_AM800B:
+ type = "AM29LV800B (8 Mbit, bottom boot sect)";
+ break;
+ case FLASH_AM800T:
+ type = "AM29LV800T (8 Mbit, top boot sector)";
+ break;
+ case FLASH_AM160T:
+ type = "AM29LV160T (16 Mbit, top boot sector)";
+ break;
+ case FLASH_AM320B:
+ type = "AM29LV320B (32 Mbit, bottom boot sect)";
+ break;
+ case FLASH_AM320T:
+ type = "AM29LV320T (32 Mbit, top boot sector)";
+ break;
+ case FLASH_STM800AB:
+ type = "M29W800AB (8 Mbit, bottom boot sect)";
+ break;
+ case FLASH_SST800A:
+ type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
+ break;
+ case FLASH_SST160A:
+ type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
+ break;
+ }
+ }
- printf(
- "\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct,
- type,
- info->size >> 10,
- info->sector_count
- );
+ printf ("\n Brand: %s Type: %s\n"
+ " Size: %lu KB in %d Sectors\n",
+ mfct, type, info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
+ printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
- unsigned long size;
- unsigned int erased;
- unsigned long * flash = (unsigned long *) info->start[i];
+ for (i = 0; i < info->sector_count; i++) {
+ unsigned long size;
+ unsigned int erased;
+ unsigned long *flash = (unsigned long *) info->start[i];
- /*
- * Check if whole sector is erased
- */
- size =
- (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
+ /*
+ * Check if whole sector is erased
+ */
+ size = (i != (info->sector_count - 1)) ?
+ (info->start[i + 1] - info->start[i]) >> 2 :
+ (info->start[0] + info->size - info->start[i]) >> 2;
- for(
- flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size) && erased;
- flash++
- )
- erased = *flash == ~0x0UL;
+ for (flash = (unsigned long *) info->start[i], erased = 1;
+ (flash != (unsigned long *) info->start[i] + size)
+ && erased; flash++)
+ erased = *flash == ~0x0UL;
- printf(
- "%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ",
- info->protect[i] ? "RO" : " "
- );
- }
+ printf ("%s %08lX %s %s",
+ (i % 5) ? "" : "\n ",
+ info->start[i],
+ erased ? "E" : " ", info->protect[i] ? "RO" : " ");
+ }
- puts("\n");
- return;
+ puts ("\n");
+ return;
}
#if 0
@@ -359,268 +376,275 @@
/*
* The following code cannot be run from FLASH!
*/
-ulong
-flash_get_size (vu_long *addr, flash_info_t *info)
+ulong flash_get_size (vu_long * addr, flash_info_t * info)
{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
- printf("flash_get_size: \n");
- /* Write auto select command: read Manufacturer ID */
- eieio();
- addr2[ADDR0] = (FLASH_WORD_SIZE)0xAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x55;
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x90;
- value = addr2[0];
+ printf ("flash_get_size: \n");
+ /* Write auto select command: read Manufacturer ID */
+ eieio ();
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90;
+ value = addr2[0];
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
- printf("recognised manufacturer");
+ switch (value) {
+ case (FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+ printf ("recognised manufacturer");
- value = addr2[ADDR3]; /* device ID */
+ value = addr2[ADDR3]; /* device ID */
debug ("\ndev_code=%x\n", value);
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ switch (value) {
+ case (FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ case (FLASH_WORD_SIZE) SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ case (FLASH_WORD_SIZE) SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ case (FLASH_WORD_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
- }
-
- printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
}
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
+
+ printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id,
+ info->sector_count, info->size);
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_MAN_SST) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
- }
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
if (info->flash_id & FLASH_MAN_SST)
- info->protect[i] = 0;
+ info->protect[i] = 0;
else
- info->protect[i] = addr2[2] & 1;
- }
+ info->protect[i] = addr2[2] & 1;
+ }
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
- }
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr2 = (FLASH_WORD_SIZE *) info->start[0];
+ *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ }
- return (info->size);
+ return (info->size);
}
#endif
-int
-flash_erase(flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+ unsigned char sh8b;
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
}
- return 1;
- }
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
}
- }
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
- l_sect = -1;
+ l_sect = -1;
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START)
+ && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[sect] - info->start[0]) << sh8b));
- if (info->flash_id & FLASH_MAN_SST)
- {
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- udelay(30000); /* wait 30 ms */
- }
- else
- addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- l_sect = sect;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->
+ start
+ [sect]
+ -
+ info->
+ start
+ [0]) <<
+ sh8b));
+ if (info->flash_id & FLASH_MAN_SST) {
+ addr[ADDR0 << sh8b] =
+ (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1 << sh8b] =
+ (FLASH_WORD_SIZE) 0x00550055;
+ addr[ADDR0 << sh8b] =
+ (FLASH_WORD_SIZE) 0x00800080;
+ addr[ADDR0 << sh8b] =
+ (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1 << sh8b] =
+ (FLASH_WORD_SIZE) 0x00550055;
+ addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ udelay (30000); /* wait 30 ms */
+ } else
+ addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ l_sect = sect;
+ }
}
- }
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[l_sect] - info->start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
+ start = get_timer (0);
+ last = start;
+ addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] -
+ info->
+ start[0]) << sh8b));
+ while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
}
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ DONE:
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
- printf (" done\n");
- return 0;
+ printf (" done\n");
+ return 0;
}
/*-----------------------------------------------------------------------
@@ -630,68 +654,68 @@
* 2 - Flash not erased
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
- ulong cp, wp, data;
- int i, l, rc;
+ ulong cp, wp, data;
+ int i, l, rc;
- wp = (addr & ~3); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
}
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
+ if (cnt == 0) {
+ return (0);
}
- wp += 4;
- }
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
+ /*
+ * handle unaligned tail bytes
+ */
data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
}
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
+ return (write_word (info, wp, data));
}
/*-----------------------------------------------------------------------
@@ -700,55 +724,55 @@
* 1 - write timeout
* 2 - Flash not erased
*/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+static int write_word (flash_info_t * info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0];
volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
- ulong start;
- int flag;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int flag;
int i;
- unsigned char sh8b;
+ unsigned char sh8b;
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START)
+ && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
- dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
- info->start[0]);
+ dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) +
+ info->start[0]);
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
- for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
- {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0;
- dest2[i << sh8b] = data2[i];
+ dest2[i << sh8b] = data2[i];
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
- return (0);
+ return (0);
}
/*-----------------------------------------------------------------------
diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c
index b1c28eb..7064567 100644
--- a/board/bmw/ns16550.c
+++ b/board/bmw/ns16550.c
@@ -9,49 +9,49 @@
typedef struct NS16550 *NS16550_t;
-const NS16550_t COM_PORTS[] = { (NS16550_t) ((CFG_EUMB_ADDR) + 0x4500), (NS16550_t) ((CFG_EUMB_ADDR) + 0x4600)};
+const NS16550_t COM_PORTS[] =
+ { (NS16550_t) ((CFG_EUMB_ADDR) + 0x4500),
+(NS16550_t) ((CFG_EUMB_ADDR) + 0x4600) };
-volatile struct NS16550 *
-NS16550_init(int chan, int baud_divisor)
+volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
{
- volatile struct NS16550 *com_port;
- com_port = (struct NS16550 *) COM_PORTS[chan];
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
-return (com_port);
+ volatile struct NS16550 *com_port;
+
+ com_port = (struct NS16550 *) COM_PORTS[chan];
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE; /* Access baud rate */
+ com_port->dll = baud_divisor & 0xff; /* 9600 baud */
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
+ com_port->mcr = MCR_RTS; /* RTS/DTR */
+ com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
+ return (com_port);
}
-void
-NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor)
+void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor)
{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE; /* Access baud rate */
+ com_port->dll = baud_divisor & 0xff; /* 9600 baud */
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
+ com_port->mcr = MCR_RTS; /* RTS/DTR */
+ com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
}
-void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c)
+void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c)
{
- while ((com_port->lsr & LSR_THRE) == 0) ;
- com_port->thr = c;
+ while ((com_port->lsr & LSR_THRE) == 0);
+ com_port->thr = c;
}
-unsigned char
-NS16550_getc(volatile struct NS16550 *com_port)
+unsigned char NS16550_getc (volatile struct NS16550 *com_port)
{
- while ((com_port->lsr & LSR_DR) == 0) ;
- return (com_port->rbr);
+ while ((com_port->lsr & LSR_DR) == 0);
+ return (com_port->rbr);
}
-int NS16550_tstc(volatile struct NS16550 *com_port)
+int NS16550_tstc (volatile struct NS16550 *com_port)
{
- return ((com_port->lsr & LSR_DR) != 0);
+ return ((com_port->lsr & LSR_DR) != 0);
}
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index 0b7b389..104f45b 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -12,20 +12,19 @@
*/
-struct NS16550
- {
- unsigned char rbrthrdlb; /* 0 */
- unsigned char ierdmb; /* 1 */
- unsigned char iirfcrafr; /* 2 */
- unsigned char lcr; /* 3 */
- unsigned char mcr; /* 4 */
- unsigned char lsr; /* 5 */
- unsigned char msr; /* 6 */
- unsigned char scr; /* 7 */
- unsigned char reserved[2]; /* 8 & 9 */
- unsigned char dsr; /* 10 */
- unsigned char dcr; /* 11 */
- };
+struct NS16550 {
+ unsigned char rbrthrdlb; /* 0 */
+ unsigned char ierdmb; /* 1 */
+ unsigned char iirfcrafr; /* 2 */
+ unsigned char lcr; /* 3 */
+ unsigned char mcr; /* 4 */
+ unsigned char lsr; /* 5 */
+ unsigned char msr; /* 6 */
+ unsigned char scr; /* 7 */
+ unsigned char reserved[2]; /* 8 & 9 */
+ unsigned char dsr; /* 10 */
+ unsigned char dcr; /* 11 */
+};
#define rbr rbrthrdlb
@@ -37,44 +36,44 @@
#define fcr iirfcrafr
#define afr iirfcrafr
-#define FCR_FIFO_EN 0x01 /*fifo enable*/
-#define FCR_RXSR 0x02 /*reciever soft reset*/
-#define FCR_TXSR 0x04 /*transmitter soft reset*/
-#define FCR_DMS 0x08 /* DMA Mode Select */
+#define FCR_FIFO_EN 0x01 /*fifo enable */
+#define FCR_RXSR 0x02 /*reciever soft reset */
+#define FCR_TXSR 0x04 /*transmitter soft reset */
+#define FCR_DMS 0x08 /* DMA Mode Select */
-#define MCR_RTS 0x02 /* Readyu to Send */
+#define MCR_RTS 0x02 /* Readyu to Send */
#define MCR_LOOP 0x10 /* Local loopback mode enable */
/* #define MCR_DTR 0x01 noton 8245 duart */
/* #define MCR_DMA_EN 0x04 noton 8245 duart */
/* #define MCR_TX_DFR 0x08 noton 8245 duart */
-#define LCR_WLS_MSK 0x03 /* character length slect mask*/
-#define LCR_WLS_5 0x00 /* 5 bit character length */
-#define LCR_WLS_6 0x01 /* 6 bit character length */
-#define LCR_WLS_7 0x02 /* 7 bit character length */
-#define LCR_WLS_8 0x03 /* 8 bit character length */
-#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN 0x08 /* Parity eneble*/
-#define LCR_EPS 0x10 /* Even Parity Select*/
-#define LCR_STKP 0x20 /* Stick Parity*/
-#define LCR_SBRK 0x40 /* Set Break*/
-#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */
+#define LCR_WLS_MSK 0x03 /* character length slect mask */
+#define LCR_WLS_5 0x00 /* 5 bit character length */
+#define LCR_WLS_6 0x01 /* 6 bit character length */
+#define LCR_WLS_7 0x02 /* 7 bit character length */
+#define LCR_WLS_8 0x03 /* 8 bit character length */
+#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define LCR_PEN 0x08 /* Parity eneble */
+#define LCR_EPS 0x10 /* Even Parity Select */
+#define LCR_STKP 0x20 /* Stick Parity */
+#define LCR_SBRK 0x40 /* Set Break */
+#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
+#define LSR_DR 0x01 /* Data ready */
+#define LSR_OE 0x02 /* Overrun */
+#define LSR_PE 0x04 /* Parity error */
+#define LSR_FE 0x08 /* Framing error */
+#define LSR_BI 0x10 /* Break */
+#define LSR_THRE 0x20 /* Xmit holding register empty */
+#define LSR_TEMT 0x40 /* Xmitter empty */
+#define LSR_ERR 0x80 /* Error */
/* useful defaults for LCR*/
#define LCR_8N1 0x03
-volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
-void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc(volatile struct NS16550 *com_port);
-int NS16550_tstc(volatile struct NS16550 *com_port);
-void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
+volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
+void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
+unsigned char NS16550_getc (volatile struct NS16550 *com_port);
+int NS16550_tstc (volatile struct NS16550 *com_port);
+void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);
diff --git a/board/cogent/mb.c b/board/cogent/mb.c
index ff991cf..e84c7dd 100644
--- a/board/cogent/mb.c
+++ b/board/cogent/mb.c
@@ -43,152 +43,166 @@
const iop_conf_t iop_conf_tab[4][32] = {
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 0, 0, 0, 0, 0 },
- /* PA30 */ { 0, 0, 0, 0, 0, 0 },
- /* PA29 */ { 0, 0, 0, 0, 0, 0 },
- /* PA28 */ { 0, 0, 0, 0, 0, 0 },
- /* PA27 */ { 0, 0, 0, 0, 0, 0 },
- /* PA26 */ { 0, 0, 0, 0, 0, 0 },
- /* PA25 */ { 0, 0, 0, 0, 0, 0 },
- /* PA24 */ { 0, 0, 0, 0, 0, 0 },
- /* PA23 */ { 0, 0, 0, 0, 0, 0 },
- /* PA22 */ { 0, 0, 0, 0, 0, 0 },
- /* PA21 */ { 0, 0, 0, 0, 0, 0 },
- /* PA20 */ { 0, 0, 0, 0, 0, 0 },
- /* PA19 */ { 0, 0, 0, 0, 0, 0 },
- /* PA18 */ { 0, 0, 0, 0, 0, 0 },
- /* PA17 */ { 0, 0, 0, 0, 0, 0 },
- /* PA16 */ { 0, 0, 0, 0, 0, 0 },
- /* PA15 */ { 0, 0, 0, 0, 0, 0 },
- /* PA14 */ { 0, 0, 0, 0, 0, 0 },
- /* PA13 */ { 0, 0, 0, 0, 0, 0 },
- /* PA12 */ { 0, 0, 0, 0, 0, 0 },
- /* PA11 */ { 0, 0, 0, 0, 0, 0 },
- /* PA10 */ { 0, 0, 0, 0, 0, 0 },
- /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
- /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
- /* PA7 */ { 0, 0, 0, 0, 0, 0 },
- /* PA6 */ { 0, 0, 0, 0, 0, 0 },
- /* PA5 */ { 0, 0, 0, 0, 0, 0 },
- /* PA4 */ { 0, 0, 0, 0, 0, 0 },
- /* PA3 */ { 0, 0, 0, 0, 0, 0 },
- /* PA2 */ { 0, 0, 0, 0, 0, 0 },
- /* PA1 */ { 0, 0, 0, 0, 0, 0 },
- /* PA0 */ { 0, 0, 0, 0, 0, 0 }
- },
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ {0, 0, 0, 0, 0, 0},
+ /* PA30 */ {0, 0, 0, 0, 0, 0},
+ /* PA29 */ {0, 0, 0, 0, 0, 0},
+ /* PA28 */ {0, 0, 0, 0, 0, 0},
+ /* PA27 */ {0, 0, 0, 0, 0, 0},
+ /* PA26 */ {0, 0, 0, 0, 0, 0},
+ /* PA25 */ {0, 0, 0, 0, 0, 0},
+ /* PA24 */ {0, 0, 0, 0, 0, 0},
+ /* PA23 */ {0, 0, 0, 0, 0, 0},
+ /* PA22 */ {0, 0, 0, 0, 0, 0},
+ /* PA21 */ {0, 0, 0, 0, 0, 0},
+ /* PA20 */ {0, 0, 0, 0, 0, 0},
+ /* PA19 */ {0, 0, 0, 0, 0, 0},
+ /* PA18 */ {0, 0, 0, 0, 0, 0},
+ /* PA17 */ {0, 0, 0, 0, 0, 0},
+ /* PA16 */ {0, 0, 0, 0, 0, 0},
+ /* PA15 */ {0, 0, 0, 0, 0, 0},
+ /* PA14 */ {0, 0, 0, 0, 0, 0},
+ /* PA13 */ {0, 0, 0, 0, 0, 0},
+ /* PA12 */ {0, 0, 0, 0, 0, 0},
+ /* PA11 */ {0, 0, 0, 0, 0, 0},
+ /* PA10 */ {0, 0, 0, 0, 0, 0},
+ /* PA9 */ {1, 1, 0, 1, 0, 0},
+ /* SMC2 TXD */
+ /* PA8 */ {1, 1, 0, 0, 0, 0},
+ /* SMC2 RXD */
+ /* PA7 */ {0, 0, 0, 0, 0, 0},
+ /* PA6 */ {0, 0, 0, 0, 0, 0},
+ /* PA5 */ {0, 0, 0, 0, 0, 0},
+ /* PA4 */ {0, 0, 0, 0, 0, 0},
+ /* PA3 */ {0, 0, 0, 0, 0, 0},
+ /* PA2 */ {0, 0, 0, 0, 0, 0},
+ /* PA1 */ {0, 0, 0, 0, 0, 0},
+ /* PA0 */ {0, 0, 0, 0, 0, 0}
+ },
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 0, 0, 0, 0, 0, 0 },
- /* PB30 */ { 0, 0, 0, 0, 0, 0 },
- /* PB29 */ { 0, 0, 0, 0, 0, 0 },
- /* PB28 */ { 0, 0, 0, 0, 0, 0 },
- /* PB27 */ { 0, 0, 0, 0, 0, 0 },
- /* PB26 */ { 0, 0, 0, 0, 0, 0 },
- /* PB25 */ { 0, 0, 0, 0, 0, 0 },
- /* PB24 */ { 0, 0, 0, 0, 0, 0 },
- /* PB23 */ { 0, 0, 0, 0, 0, 0 },
- /* PB22 */ { 0, 0, 0, 0, 0, 0 },
- /* PB21 */ { 0, 0, 0, 0, 0, 0 },
- /* PB20 */ { 0, 0, 0, 0, 0, 0 },
- /* PB19 */ { 0, 0, 0, 0, 0, 0 },
- /* PB18 */ { 0, 0, 0, 0, 0, 0 },
- /* PB17 */ { 0, 0, 0, 0, 0, 0 },
- /* PB16 */ { 0, 0, 0, 0, 0, 0 },
- /* PB15 */ { 0, 0, 0, 0, 0, 0 },
- /* PB14 */ { 0, 0, 0, 0, 0, 0 },
- /* PB13 */ { 0, 0, 0, 0, 0, 0 },
- /* PB12 */ { 0, 0, 0, 0, 0, 0 },
- /* PB11 */ { 0, 0, 0, 0, 0, 0 },
- /* PB10 */ { 0, 0, 0, 0, 0, 0 },
- /* PB9 */ { 0, 0, 0, 0, 0, 0 },
- /* PB8 */ { 0, 0, 0, 0, 0, 0 },
- /* PB7 */ { 0, 0, 0, 0, 0, 0 },
- /* PB6 */ { 0, 0, 0, 0, 0, 0 },
- /* PB5 */ { 0, 0, 0, 0, 0, 0 },
- /* PB4 */ { 0, 0, 0, 0, 0, 0 },
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ {0, 0, 0, 0, 0, 0},
+ /* PB30 */ {0, 0, 0, 0, 0, 0},
+ /* PB29 */ {0, 0, 0, 0, 0, 0},
+ /* PB28 */ {0, 0, 0, 0, 0, 0},
+ /* PB27 */ {0, 0, 0, 0, 0, 0},
+ /* PB26 */ {0, 0, 0, 0, 0, 0},
+ /* PB25 */ {0, 0, 0, 0, 0, 0},
+ /* PB24 */ {0, 0, 0, 0, 0, 0},
+ /* PB23 */ {0, 0, 0, 0, 0, 0},
+ /* PB22 */ {0, 0, 0, 0, 0, 0},
+ /* PB21 */ {0, 0, 0, 0, 0, 0},
+ /* PB20 */ {0, 0, 0, 0, 0, 0},
+ /* PB19 */ {0, 0, 0, 0, 0, 0},
+ /* PB18 */ {0, 0, 0, 0, 0, 0},
+ /* PB17 */ {0, 0, 0, 0, 0, 0},
+ /* PB16 */ {0, 0, 0, 0, 0, 0},
+ /* PB15 */ {0, 0, 0, 0, 0, 0},
+ /* PB14 */ {0, 0, 0, 0, 0, 0},
+ /* PB13 */ {0, 0, 0, 0, 0, 0},
+ /* PB12 */ {0, 0, 0, 0, 0, 0},
+ /* PB11 */ {0, 0, 0, 0, 0, 0},
+ /* PB10 */ {0, 0, 0, 0, 0, 0},
+ /* PB9 */ {0, 0, 0, 0, 0, 0},
+ /* PB8 */ {0, 0, 0, 0, 0, 0},
+ /* PB7 */ {0, 0, 0, 0, 0, 0},
+ /* PB6 */ {0, 0, 0, 0, 0, 0},
+ /* PB5 */ {0, 0, 0, 0, 0, 0},
+ /* PB4 */ {0, 0, 0, 0, 0, 0},
+ /* PB3 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PB2 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PB1 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PB0 */ {0, 0, 0, 0, 0, 0}
+ /* pin doesn't exist */
+ },
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 0, 0, 0 },
- /* PC30 */ { 0, 0, 0, 0, 0, 0 },
- /* PC29 */ { 0, 0, 0, 0, 0, 0 },
- /* PC28 */ { 0, 0, 0, 0, 0, 0 },
- /* PC27 */ { 0, 0, 0, 0, 0, 0 },
- /* PC26 */ { 0, 0, 0, 0, 0, 0 },
- /* PC25 */ { 0, 0, 0, 0, 0, 0 },
- /* PC24 */ { 0, 0, 0, 0, 0, 0 },
- /* PC23 */ { 0, 0, 0, 0, 0, 0 },
- /* PC22 */ { 0, 0, 0, 0, 0, 0 },
- /* PC21 */ { 0, 0, 0, 0, 0, 0 },
- /* PC20 */ { 0, 0, 0, 0, 0, 0 },
- /* PC19 */ { 0, 0, 0, 0, 0, 0 },
- /* PC18 */ { 0, 0, 0, 0, 0, 0 },
- /* PC17 */ { 0, 0, 0, 0, 0, 0 },
- /* PC16 */ { 0, 0, 0, 0, 0, 0 },
- /* PC15 */ { 0, 0, 0, 0, 0, 0 },
- /* PC14 */ { 0, 0, 0, 0, 0, 0 },
- /* PC13 */ { 0, 0, 0, 0, 0, 0 },
- /* PC12 */ { 0, 0, 0, 0, 0, 0 },
- /* PC11 */ { 0, 0, 0, 0, 0, 0 },
- /* PC10 */ { 0, 0, 0, 0, 0, 0 },
- /* PC9 */ { 0, 0, 0, 0, 0, 0 },
- /* PC8 */ { 0, 0, 0, 0, 0, 0 },
- /* PC7 */ { 0, 0, 0, 0, 0, 0 },
- /* PC6 */ { 0, 0, 0, 0, 0, 0 },
- /* PC5 */ { 0, 0, 0, 0, 0, 0 },
- /* PC4 */ { 0, 0, 0, 0, 0, 0 },
- /* PC3 */ { 0, 0, 0, 0, 0, 0 },
- /* PC2 */ { 0, 0, 0, 0, 0, 0 },
- /* PC1 */ { 0, 0, 0, 0, 0, 0 },
- /* PC0 */ { 0, 0, 0, 0, 0, 0 }
- },
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ {0, 0, 0, 0, 0, 0},
+ /* PC30 */ {0, 0, 0, 0, 0, 0},
+ /* PC29 */ {0, 0, 0, 0, 0, 0},
+ /* PC28 */ {0, 0, 0, 0, 0, 0},
+ /* PC27 */ {0, 0, 0, 0, 0, 0},
+ /* PC26 */ {0, 0, 0, 0, 0, 0},
+ /* PC25 */ {0, 0, 0, 0, 0, 0},
+ /* PC24 */ {0, 0, 0, 0, 0, 0},
+ /* PC23 */ {0, 0, 0, 0, 0, 0},
+ /* PC22 */ {0, 0, 0, 0, 0, 0},
+ /* PC21 */ {0, 0, 0, 0, 0, 0},
+ /* PC20 */ {0, 0, 0, 0, 0, 0},
+ /* PC19 */ {0, 0, 0, 0, 0, 0},
+ /* PC18 */ {0, 0, 0, 0, 0, 0},
+ /* PC17 */ {0, 0, 0, 0, 0, 0},
+ /* PC16 */ {0, 0, 0, 0, 0, 0},
+ /* PC15 */ {0, 0, 0, 0, 0, 0},
+ /* PC14 */ {0, 0, 0, 0, 0, 0},
+ /* PC13 */ {0, 0, 0, 0, 0, 0},
+ /* PC12 */ {0, 0, 0, 0, 0, 0},
+ /* PC11 */ {0, 0, 0, 0, 0, 0},
+ /* PC10 */ {0, 0, 0, 0, 0, 0},
+ /* PC9 */ {0, 0, 0, 0, 0, 0},
+ /* PC8 */ {0, 0, 0, 0, 0, 0},
+ /* PC7 */ {0, 0, 0, 0, 0, 0},
+ /* PC6 */ {0, 0, 0, 0, 0, 0},
+ /* PC5 */ {0, 0, 0, 0, 0, 0},
+ /* PC4 */ {0, 0, 0, 0, 0, 0},
+ /* PC3 */ {0, 0, 0, 0, 0, 0},
+ /* PC2 */ {0, 0, 0, 0, 0, 0},
+ /* PC1 */ {0, 0, 0, 0, 0, 0},
+ /* PC0 */ {0, 0, 0, 0, 0, 0}
+ },
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 0, 0, 0, 0, 0, 0 },
- /* PD30 */ { 0, 0, 0, 0, 0, 0 },
- /* PD29 */ { 0, 0, 0, 0, 0, 0 },
- /* PD28 */ { 0, 0, 0, 0, 0, 0 },
- /* PD27 */ { 0, 0, 0, 0, 0, 0 },
- /* PD26 */ { 0, 0, 0, 0, 0, 0 },
- /* PD25 */ { 0, 0, 0, 0, 0, 0 },
- /* PD24 */ { 0, 0, 0, 0, 0, 0 },
- /* PD23 */ { 0, 0, 0, 0, 0, 0 },
- /* PD22 */ { 0, 0, 0, 0, 0, 0 },
- /* PD21 */ { 0, 0, 0, 0, 0, 0 },
- /* PD20 */ { 0, 0, 0, 0, 0, 0 },
- /* PD19 */ { 0, 0, 0, 0, 0, 0 },
- /* PD18 */ { 0, 0, 0, 0, 0, 0 },
- /* PD17 */ { 0, 0, 0, 0, 0, 0 },
- /* PD16 */ { 0, 0, 0, 0, 0, 0 },
- /* PD15 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SCL */
- /* PD13 */ { 0, 0, 0, 0, 0, 0 },
- /* PD12 */ { 0, 0, 0, 0, 0, 0 },
- /* PD11 */ { 0, 0, 0, 0, 0, 0 },
- /* PD10 */ { 0, 0, 0, 0, 0, 0 },
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 0, 0, 0 },
- /* PD6 */ { 0, 0, 0, 0, 0, 0 },
- /* PD5 */ { 0, 0, 0, 0, 0, 0 },
- /* PD4 */ { 0, 0, 0, 0, 0, 0 },
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ {0, 0, 0, 0, 0, 0},
+ /* PD30 */ {0, 0, 0, 0, 0, 0},
+ /* PD29 */ {0, 0, 0, 0, 0, 0},
+ /* PD28 */ {0, 0, 0, 0, 0, 0},
+ /* PD27 */ {0, 0, 0, 0, 0, 0},
+ /* PD26 */ {0, 0, 0, 0, 0, 0},
+ /* PD25 */ {0, 0, 0, 0, 0, 0},
+ /* PD24 */ {0, 0, 0, 0, 0, 0},
+ /* PD23 */ {0, 0, 0, 0, 0, 0},
+ /* PD22 */ {0, 0, 0, 0, 0, 0},
+ /* PD21 */ {0, 0, 0, 0, 0, 0},
+ /* PD20 */ {0, 0, 0, 0, 0, 0},
+ /* PD19 */ {0, 0, 0, 0, 0, 0},
+ /* PD18 */ {0, 0, 0, 0, 0, 0},
+ /* PD17 */ {0, 0, 0, 0, 0, 0},
+ /* PD16 */ {0, 0, 0, 0, 0, 0},
+ /* PD15 */ {1, 1, 1, 0, 0, 0},
+ /* I2C SDA */
+ /* PD14 */ {1, 1, 1, 0, 0, 0},
+ /* I2C SCL */
+ /* PD13 */ {0, 0, 0, 0, 0, 0},
+ /* PD12 */ {0, 0, 0, 0, 0, 0},
+ /* PD11 */ {0, 0, 0, 0, 0, 0},
+ /* PD10 */ {0, 0, 0, 0, 0, 0},
+ /* PD9 */ {1, 1, 0, 1, 0, 0},
+ /* SMC1 TXD */
+ /* PD8 */ {1, 1, 0, 0, 0, 0},
+ /* SMC1 RXD */
+ /* PD7 */ {0, 0, 0, 0, 0, 0},
+ /* PD6 */ {0, 0, 0, 0, 0, 0},
+ /* PD5 */ {0, 0, 0, 0, 0, 0},
+ /* PD4 */ {0, 0, 0, 0, 0, 0},
+ /* PD3 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PD2 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PD1 */ {0, 0, 0, 0, 0, 0},
+ /* pin doesn't exist */
+ /* PD0 */ {0, 0, 0, 0, 0, 0}
+ /* pin doesn't exist */
+ }
};
-#endif /* CONFIG_8260 */
+#endif /* CONFIG_8260 */
/* ------------------------------------------------------------------------- */
@@ -196,12 +210,11 @@
* Check Board Identity:
*/
-int
-checkboard(void)
+int checkboard (void)
{
- puts ("Board: Cogent " COGENT_MOTHERBOARD " motherboard with a "
- COGENT_CPU_MODULE " CPU Module\n");
- return (0);
+ puts ("Board: Cogent " COGENT_MOTHERBOARD " motherboard with a "
+ COGENT_CPU_MODULE " CPU Module\n");
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -213,46 +226,44 @@
int misc_init_f (void)
{
- printf ("DIPSW: ");
- dipsw_init();
- return (0);
+ printf ("DIPSW: ");
+ dipsw_init ();
+ return (0);
}
/* ------------------------------------------------------------------------- */
-long int
-initdram(int board_type)
+long int initdram (int board_type)
{
#if CONFIG_CMA111
- return (32L * 1024L * 1024L);
+ return (32L * 1024L * 1024L);
#else
- unsigned char dipsw_val;
- int dual, size0, size1;
- long int memsize;
+ unsigned char dipsw_val;
+ int dual, size0, size1;
+ long int memsize;
- dipsw_val = dipsw_cooked();
+ dipsw_val = dipsw_cooked ();
- dual = dipsw_val & 0x01;
- size0 = (dipsw_val & 0x08) >> 3;
- size1 = (dipsw_val & 0x04) >> 2;
+ dual = dipsw_val & 0x01;
+ size0 = (dipsw_val & 0x08) >> 3;
+ size1 = (dipsw_val & 0x04) >> 2;
- if (size0)
- if (size1)
- memsize = 16L * 1024L * 1024L;
- else
- memsize = 1L * 1024L * 1024L;
- else
- if (size1)
- memsize = 4L * 1024L * 1024L;
+ if (size0)
+ if (size1)
+ memsize = 16L * 1024L * 1024L;
+ else
+ memsize = 1L * 1024L * 1024L;
+ else if (size1)
+ memsize = 4L * 1024L * 1024L;
else {
- printf("[Illegal dip switch settings - assuming 16Mbyte SIMMs] ");
- memsize = 16L * 1024L * 1024L; /* shouldn't happen - guess 16M */
+ printf ("[Illegal dip switch settings - assuming 16Mbyte SIMMs] ");
+ memsize = 16L * 1024L * 1024L; /* shouldn't happen - guess 16M */
}
- if (dual)
- memsize *= 2L;
+ if (dual)
+ memsize *= 2L;
- return (memsize);
+ return (memsize);
#endif
}
@@ -265,21 +276,21 @@
int misc_init_r (void)
{
- printf ("LCD: ");
- lcd_init();
+ printf ("LCD: ");
+ lcd_init ();
#if 0
- printf ("RTC: ");
- rtc_init();
+ printf ("RTC: ");
+ rtc_init ();
- printf ("PAR: ");
- par_init();
+ printf ("PAR: ");
+ par_init ();
- printf ("KBM: ");
- kbm_init();
+ printf ("KBM: ");
+ kbm_init ();
- printf ("PCI: ");
- pci_init();
+ printf ("PCI: ");
+ pci_init ();
#endif
- return (0);
+ return (0);
}
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index c75137a..fc48ed5 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -37,17 +37,18 @@
*/
ulong bab7xx_get_bus_freq (void)
{
- /*
- * The GPIO Port 1 on BAB7xx reflects the bus speed.
- */
- volatile struct GPIO *gpio = (struct GPIO *)(CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+ /*
+ * The GPIO Port 1 on BAB7xx reflects the bus speed.
+ */
+ volatile struct GPIO *gpio =
+ (struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
- unsigned char data = gpio->dta1;
+ unsigned char data = gpio->dta1;
- if (data & 0x02)
- return 66666666;
+ if (data & 0x02)
+ return 66666666;
- return 83333333;
+ return 83333333;
}
/*---------------------------------------------------------------------------*/
@@ -57,24 +58,26 @@
*/
ulong bab7xx_get_gclk_freq (void)
{
- static const int pllratio_to_factor[] = {
- 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00,
- };
+ static const int pllratio_to_factor[] = {
+ 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35,
+ 00,
+ };
- return pllratio_to_factor[get_hid1 () >> 28] * (bab7xx_get_bus_freq() / 10);
+ return pllratio_to_factor[get_hid1 () >> 28] *
+ (bab7xx_get_bus_freq () / 10);
}
/*----------------------------------------------------------------------------*/
int checkcpu (void)
{
- uint pvr = get_pvr();
+ uint pvr = get_pvr ();
- printf ("MPC7xx V%d.%d",(pvr >> 8) & 0xFF, pvr & 0xFF);
- printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq()/1000000,
- bab7xx_get_bus_freq()/1000000);
+ printf ("MPC7xx V%d.%d", (pvr >> 8) & 0xFF, pvr & 0xFF);
+ printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq () / 1000000,
+ bab7xx_get_bus_freq () / 1000000);
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -82,20 +85,20 @@
int checkboard (void)
{
#ifdef CFG_ADDRESS_MAP_A
- puts ("Board: ELTEC BAB7xx PReP\n");
+ puts ("Board: ELTEC BAB7xx PReP\n");
#else
- puts ("Board: ELTEC BAB7xx CHRP\n");
+ puts ("Board: ELTEC BAB7xx CHRP\n");
#endif
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
int checkflash (void)
{
- /* TODO: XXX XXX XXX */
- printf ("2 MB ## Test not implemented yet ##\n");
- return (0);
+ /* TODO: XXX XXX XXX */
+ printf ("2 MB ## Test not implemented yet ##\n");
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -103,77 +106,75 @@
static unsigned int mpc106_read_cfg_dword (unsigned int reg)
{
- unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
+ unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
- out32r(MPC106_REG_ADDR, reg_addr);
+ out32r (MPC106_REG_ADDR, reg_addr);
- return (in32r(MPC106_REG_DATA | (reg & 0x3)));
+ return (in32r (MPC106_REG_DATA | (reg & 0x3)));
}
/* ------------------------------------------------------------------------- */
long int dram_size (int board_type)
{
- /* No actual initialisation to do - done when setting up
- * PICRs MCCRs ME/SARs etc in ram_init.S.
- */
+ /* No actual initialisation to do - done when setting up
+ * PICRs MCCRs ME/SARs etc in ram_init.S.
+ */
- register unsigned long i, msar1, mear1, memSize;
+ register unsigned long i, msar1, mear1, memSize;
#if defined(CFG_MEMTEST)
- register unsigned long reg;
+ register unsigned long reg;
- printf("Testing DRAM\n");
+ printf ("Testing DRAM\n");
- /* write each mem addr with it's address */
- for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
- *reg = reg;
+ /* write each mem addr with it's address */
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+ *reg = reg;
- for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
- {
- if (*reg != reg)
- return -1;
- }
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+ if (*reg != reg)
+ return -1;
+ }
#endif
- /*
- * Since MPC106 memory controller chip has already been set to
- * control all memory, just read and interpret its memory boundery register.
- */
- memSize = 0;
- msar1 = mpc106_read_cfg_dword(MPC106_MSAR1);
- mear1 = mpc106_read_cfg_dword(MPC106_MEAR1);
- i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf;
+ /*
+ * Since MPC106 memory controller chip has already been set to
+ * control all memory, just read and interpret its memory boundery register.
+ */
+ memSize = 0;
+ msar1 = mpc106_read_cfg_dword (MPC106_MSAR1);
+ mear1 = mpc106_read_cfg_dword (MPC106_MEAR1);
+ i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf;
- do
- {
- if (i & 0x01) /* is bank enabled ? */
- memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
- msar1 >>= 8;
- mear1 >>= 8;
- i >>= 1;
- } while (i);
+ do {
+ if (i & 0x01) /* is bank enabled ? */
+ memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
+ msar1 >>= 8;
+ mear1 >>= 8;
+ i >>= 1;
+ } while (i);
- return (memSize * 0x100000);
+ return (memSize * 0x100000);
}
/* ------------------------------------------------------------------------- */
-long int initdram(int board_type)
+long int initdram (int board_type)
{
- return dram_size(board_type);
+ return dram_size (board_type);
}
/* ------------------------------------------------------------------------- */
void after_reloc (ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Jump to the main U-Boot board init code
- */
- board_init_r((gd_t *)gd, dest_addr);
+ /*
+ * Jump to the main U-Boot board init code
+ */
+ board_init_r ((gd_t *) gd, dest_addr);
}
/* ------------------------------------------------------------------------- */
@@ -182,14 +183,13 @@
* do_reset is done here because in this case it is board specific, since the
* 7xx CPUs can only be reset by external HW (the RTC in this case).
*/
-void
-do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+void do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
#if defined(CONFIG_RTC_MK48T59)
- /* trigger watchdog immediately */
- rtc_set_watchdog(1, RTC_WD_RB_16TH);
+ /* trigger watchdog immediately */
+ rtc_set_watchdog (1, RTC_WD_RB_16TH);
#else
- #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
#endif
}
@@ -200,16 +200,16 @@
* Since the 7xx CPUs don't have an internal watchdog, this function is
* board specific. We use the RTC here.
*/
-void watchdog_reset(void)
+void watchdog_reset (void)
{
#if defined(CONFIG_RTC_MK48T59)
- /* we use a 32 sec watchdog timer */
- rtc_set_watchdog(8, RTC_WD_RB_4);
+ /* we use a 32 sec watchdog timer */
+ rtc_set_watchdog (8, RTC_WD_RB_4);
#else
- #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
#endif
}
-#endif /* CONFIG_WATCHDOG */
+#endif /* CONFIG_WATCHDOG */
/* ------------------------------------------------------------------------- */
@@ -218,29 +218,28 @@
void video_get_info_str (int line_number, char *info)
{
- /* init video info strings for graphic console */
- switch (line_number)
- {
- case 1:
- sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz",
- (get_pvr() >> 8) & 0xFF,
- get_pvr() & 0xFF,
- bab7xx_get_gclk_freq()/1000000,
- bab7xx_get_bus_freq()/1000000);
- return;
- case 2:
- sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
- dram_size(0)/0x100000,
- flash_init()/0x100000);
- return;
- case 3:
- sprintf (info, " %s", smi.modeIdent);
- return;
- }
+ /* init video info strings for graphic console */
+ switch (line_number) {
+ case 1:
+ sprintf (info, " MPC7xx V%d.%d at %ld / %ld MHz",
+ (get_pvr () >> 8) & 0xFF,
+ get_pvr () & 0xFF,
+ bab7xx_get_gclk_freq () / 1000000,
+ bab7xx_get_bus_freq () / 1000000);
+ return;
+ case 2:
+ sprintf (info,
+ " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
+ dram_size (0) / 0x100000, flash_init () / 0x100000);
+ return;
+ case 3:
+ sprintf (info, " %s", smi.modeIdent);
+ return;
+ }
- /* no more info lines */
- *info = 0;
- return;
+ /* no more info lines */
+ *info = 0;
+ return;
}
#endif
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index f33aef7..1505660 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -31,32 +31,32 @@
/* imports */
extern char console_buffer[CFG_CBSIZE];
extern int l2_cache_enable (int l2control);
-extern int eepro100_write_eeprom (struct eth_device* dev, int location,
- int addr_len, unsigned short data);
-extern int read_eeprom (struct eth_device* dev, int location, int addr_len);
+extern int eepro100_write_eeprom (struct eth_device *dev, int location,
+ int addr_len, unsigned short data);
+extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
/*----------------------------------------------------------------------------*/
/*
* read/write to nvram is only byte access
*/
-void *nvram_read(void *dest, const long src, size_t count)
+void *nvram_read (void *dest, const long src, size_t count)
{
- uchar *d = (uchar *) dest;
- uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
+ uchar *d = (uchar *) dest;
+ uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
- while (count--)
- *d++ = *s++;
+ while (count--)
+ *d++ = *s++;
- return dest;
+ return dest;
}
-void nvram_write(long dest, const void *src, size_t count)
+void nvram_write (long dest, const void *src, size_t count)
{
- uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
- uchar *s = (uchar *) src;
+ uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
+ uchar *s = (uchar *) src;
- while (count--)
- *d++ = *s++;
+ while (count--)
+ *d++ = *s++;
}
/*----------------------------------------------------------------------------*/
@@ -67,192 +67,199 @@
*/
int misc_init_r (void)
{
- revinfo eerev;
- u_char *ptr;
- u_int i, l, initSrom, copyNv;
- char buf[256];
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
+ revinfo eerev;
+ u_char *ptr;
+ u_int i, l, initSrom, copyNv;
+ char buf[256];
+ char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+ 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+ };
- /* Clock setting for MPC107 i2c */
- mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
+ /* Clock setting for MPC107 i2c */
+ mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
- /* Reset the EPIC */
- out32r (MPC107_EUMB_GCR, 0xa0000000);
- while (in32r (MPC107_EUMB_GCR) & 0x80000000); /* Wait for reset to complete */
- out32r (MPC107_EUMB_GCR, 0x20000000); /* Put into into mixed mode */
- while (in32r (MPC107_EUMB_IACKR) != 0xff); /* Clear all pending interrupts */
+ /* Reset the EPIC */
+ out32r (MPC107_EUMB_GCR, 0xa0000000);
+ while (in32r (MPC107_EUMB_GCR) & 0x80000000); /* Wait for reset to complete */
+ out32r (MPC107_EUMB_GCR, 0x20000000); /* Put into into mixed mode */
+ while (in32r (MPC107_EUMB_IACKR) != 0xff); /* Clear all pending interrupts */
- /*
- * Check/Remake revision info
- */
- initSrom = 0;
- copyNv = 0;
+ /*
+ * Check/Remake revision info
+ */
+ initSrom = 0;
+ copyNv = 0;
- /* read out current revision srom contens */
- mpc107_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo),
- SECOND_DEVICE, FIRST_BLOCK);
+ /* read out current revision srom contens */
+ mpc107_srom_load (0x0000, (u_char *) & eerev, sizeof (revinfo),
+ SECOND_DEVICE, FIRST_BLOCK);
- /* read out current nvram shadow image */
- nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+ /* read out current nvram shadow image */
+ nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
- if (strcmp (eerev.magic, "ELTEC") != 0)
- {
- /* srom is not initialized -> create a default revision info */
- for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++)
- *ptr++ = 0x00;
- strcpy(eerev.magic, "ELTEC");
- eerev.revrev[0] = 1;
- eerev.revrev[1] = 0;
- eerev.size = 0x00E0;
- eerev.category[0] = 0x01;
+ if (strcmp (eerev.magic, "ELTEC") != 0) {
+ /* srom is not initialized -> create a default revision info */
+ for (i = 0, ptr = (u_char *) & eerev; i < sizeof (revinfo);
+ i++)
+ *ptr++ = 0x00;
+ strcpy (eerev.magic, "ELTEC");
+ eerev.revrev[0] = 1;
+ eerev.revrev[1] = 0;
+ eerev.size = 0x00E0;
+ eerev.category[0] = 0x01;
- /* node id from dead e128 as default */
- eerev.etheraddr[0] = 0x00;
- eerev.etheraddr[1] = 0x00;
- eerev.etheraddr[2] = 0x5B;
- eerev.etheraddr[3] = 0x00;
- eerev.etheraddr[4] = 0x2E;
- eerev.etheraddr[5] = 0x4D;
+ /* node id from dead e128 as default */
+ eerev.etheraddr[0] = 0x00;
+ eerev.etheraddr[1] = 0x00;
+ eerev.etheraddr[2] = 0x5B;
+ eerev.etheraddr[3] = 0x00;
+ eerev.etheraddr[4] = 0x2E;
+ eerev.etheraddr[5] = 0x4D;
- /* cache config word for ELPPC */
- *(int*)&eerev.res[0] = 0;
+ /* cache config word for ELPPC */
+ *(int *) &eerev.res[0] = 0;
- initSrom = 1; /* force dialog */
- copyNv = 1; /* copy to nvram */
- }
-
- if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
- el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
- {
- printf ("Invalid revision info copy in nvram !\n");
- printf ("Press key:\n <c> to copy current revision info to nvram.\n");
- printf (" <r> to reenter revision info.\n");
- printf ("=> ");
- if (0 != readline (NULL))
- {
- switch ((char)toupper(console_buffer[0]))
- {
- case 'C':
- copyNv = 1;
- break;
- case 'R':
- copyNv = 1;
- initSrom = 1;
- break;
- }
+ initSrom = 1; /* force dialog */
+ copyNv = 1; /* copy to nvram */
}
- }
- if (initSrom)
- {
- memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
- printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]);
- if (0 != readline (NULL))
- {
- eerev.revision[0][0] = (char)toupper(console_buffer[0]);
- memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
+ if ((copyNv == 0)
+ && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
+ el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+ printf ("Invalid revision info copy in nvram !\n");
+ printf ("Press key:\n <c> to copy current revision info to nvram.\n");
+ printf (" <r> to reenter revision info.\n");
+ printf ("=> ");
+ if (0 != readline (NULL)) {
+ switch ((char) toupper (console_buffer[0])) {
+ case 'C':
+ copyNv = 1;
+ break;
+ case 'R':
+ copyNv = 1;
+ initSrom = 1;
+ break;
+ }
+ }
}
- printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]);
- if (1 == readline (NULL))
- {
- eerev.revision[0][1] = (char)toupper(console_buffer[0]);
- }
+ if (initSrom) {
+ memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
+ printf ("Enter revision number (0-9): %c ",
+ eerev.revision[0][0]);
+ if (0 != readline (NULL)) {
+ eerev.revision[0][0] =
+ (char) toupper (console_buffer[0]);
+ memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
+ }
- printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board);
- if (11 == readline (NULL))
- {
- for (i=0; i<11; i++)
- eerev.board[i] = (char)toupper(console_buffer[i]);
- eerev.board[11] = '\0';
- }
+ printf ("Enter revision character (A-Z): %c ",
+ eerev.revision[0][1]);
+ if (1 == readline (NULL)) {
+ eerev.revision[0][1] =
+ (char) toupper (console_buffer[0]);
+ }
- printf ("Enter serial number: %s ", (char *)&eerev.serial );
- if (6 == readline (NULL))
- {
- for (i=0; i<6; i++)
- eerev.serial[i] = console_buffer[i];
- eerev.serial[6] = '\0';
- }
+ printf ("Enter board name (V-XXXX-XXXX): %s ",
+ (char *) &eerev.board);
+ if (11 == readline (NULL)) {
+ for (i = 0; i < 11; i++)
+ eerev.board[i] =
+ (char) toupper (console_buffer[i]);
+ eerev.board[11] = '\0';
+ }
- printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ",
- eerev.etheraddr[0], eerev.etheraddr[1],
- eerev.etheraddr[2], eerev.etheraddr[3],
- eerev.etheraddr[4], eerev.etheraddr[5]);
- if (12 == readline (NULL))
- {
- for (i=0; i<12; i+=2)
- eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
- hex[toupper(console_buffer[i+1])-'0']);
- }
+ printf ("Enter serial number: %s ", (char *) &eerev.serial);
+ if (6 == readline (NULL)) {
+ for (i = 0; i < 6; i++)
+ eerev.serial[i] = console_buffer[i];
+ eerev.serial[6] = '\0';
+ }
- l = strlen ((char *)&eerev.text);
- printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text );
- if (0 != readline (NULL))
- {
- for (i = l; i<63; i++)
- eerev.text[i] = console_buffer[i-l];
- eerev.text[63] = '\0';
- }
+ printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", eerev.etheraddr[0], eerev.etheraddr[1], eerev.etheraddr[2], eerev.etheraddr[3], eerev.etheraddr[4], eerev.etheraddr[5]);
+ if (12 == readline (NULL)) {
+ for (i = 0; i < 12; i += 2)
+ eerev.etheraddr[i >> 1] =
+ (char) (16 *
+ hex[toupper
+ (console_buffer[i]) -
+ '0'] +
+ hex[toupper
+ (console_buffer[i + 1]) -
+ '0']);
+ }
- /* prepare network eeprom */
- memset (buf, 0, 128);
+ l = strlen ((char *) &eerev.text);
+ printf ("Add to text section (max 64 chr): %s ",
+ (char *) &eerev.text);
+ if (0 != readline (NULL)) {
+ for (i = l; i < 63; i++)
+ eerev.text[i] = console_buffer[i - l];
+ eerev.text[63] = '\0';
+ }
- buf[0] = eerev.etheraddr[1];
- buf[1] = eerev.etheraddr[0];
- buf[2] = eerev.etheraddr[3];
- buf[3] = eerev.etheraddr[2];
- buf[4] = eerev.etheraddr[5];
- buf[5] = eerev.etheraddr[4];
+ /* prepare network eeprom */
+ memset (buf, 0, 128);
- *(unsigned short *)&buf[20] = 0x48B2;
- *(unsigned short *)&buf[22] = 0x0004;
- *(unsigned short *)&buf[24] = 0x1433;
+ buf[0] = eerev.etheraddr[1];
+ buf[1] = eerev.etheraddr[0];
+ buf[2] = eerev.etheraddr[3];
+ buf[3] = eerev.etheraddr[2];
+ buf[4] = eerev.etheraddr[5];
+ buf[5] = eerev.etheraddr[4];
- printf("\nSRom: Writing i82559 info ........ ");
- if (eepro100_srom_store ((unsigned short *)buf) == -1)
- printf("FAILED\n");
- else
- printf("OK\n");
+ *(unsigned short *) &buf[20] = 0x48B2;
+ *(unsigned short *) &buf[22] = 0x0004;
+ *(unsigned short *) &buf[24] = 0x1433;
- /* update CRC */
- eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size);
+ printf ("\nSRom: Writing i82559 info ........ ");
+ if (eepro100_srom_store ((unsigned short *) buf) == -1)
+ printf ("FAILED\n");
+ else
+ printf ("OK\n");
- /* write new values */
- printf("\nSRom: Writing revision info ...... ");
- if (mpc107_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev,
- sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
- printf("FAILED\n\n");
- else
- printf("OK\n\n");
+ /* update CRC */
+ eerev.crc =
+ el_srom_checksum ((u_char *) eerev.board, eerev.size);
- /* write new values as shadow image to nvram */
- nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+ /* write new values */
+ printf ("\nSRom: Writing revision info ...... ");
+ if (mpc107_srom_store
+ ((BLOCK_SIZE - sizeof (revinfo)), (u_char *) & eerev,
+ sizeof (revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
+ printf ("FAILED\n\n");
+ else
+ printf ("OK\n\n");
- } /*if (initSrom) */
+ /* write new values as shadow image to nvram */
+ nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+ CFG_SROM_SIZE);
- /* copy current values as shadow image to nvram */
- if (initSrom == 0 && copyNv == 1)
- nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+ }
+
+ /*if (initSrom) */
+ /* copy current values as shadow image to nvram */
+ if (initSrom == 0 && copyNv == 1)
+ nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+ CFG_SROM_SIZE);
- /* update environment */
- sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
- eerev.etheraddr[0], eerev.etheraddr[1],
- eerev.etheraddr[2], eerev.etheraddr[3],
- eerev.etheraddr[4], eerev.etheraddr[5]);
- setenv ("ethaddr", buf);
+ /* update environment */
+ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+ eerev.etheraddr[0], eerev.etheraddr[1],
+ eerev.etheraddr[2], eerev.etheraddr[3],
+ eerev.etheraddr[4], eerev.etheraddr[5]);
+ setenv ("ethaddr", buf);
- /* set serial console as default */
- if ((ptr = getenv ("console")) == NULL)
- setenv ("console", "serial");
+ /* set serial console as default */
+ if ((ptr = getenv ("console")) == NULL)
+ setenv ("console", "serial");
- /* print actual board identification */
- printf("Ident: %s Ser %s Rev %c%c\n",
- eerev.board, (char *)&eerev.serial,
- eerev.revision[0][0], eerev.revision[0][1]);
+ /* print actual board identification */
+ printf ("Ident: %s Ser %s Rev %c%c\n",
+ eerev.board, (char *) &eerev.serial,
+ eerev.revision[0][0], eerev.revision[0][1]);
- return (0);
+ return (0);
}
/*----------------------------------------------------------------------------*/
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 76f9f37..bc3d9f4 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -38,19 +38,19 @@
/* imports from common/main.c */
extern char console_buffer[CFG_CBSIZE];
-extern void eeprom_init (void);
-extern int eeprom_read (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
-extern int eeprom_write (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
+extern void eeprom_init (void);
+extern int eeprom_read (unsigned dev_addr, unsigned offset,
+ unsigned char *buffer, unsigned cnt);
+extern int eeprom_write (unsigned dev_addr, unsigned offset,
+ unsigned char *buffer, unsigned cnt);
/* globals */
-void *video_hw_init(void);
-void video_set_lut (unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- );
+void *video_hw_init (void);
+void video_set_lut (unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ );
GraphicDevice gdev;
@@ -60,79 +60,78 @@
static void video_default_lut (unsigned int clut_type);
/* revision info foer MHPC EEPROM offset 480 */
-typedef struct {
- char board[12]; /* 000 - Board Revision information */
- char sensor; /* 012 - Sensor Type information */
- char serial[8]; /* 013 - Board serial number */
- char etheraddr[6]; /* 021 - Ethernet node addresse */
- char revision[2]; /* 027 - Revision code */
- char option[3]; /* 029 - resevered for options */
+typedef struct {
+ char board[12]; /* 000 - Board Revision information */
+ char sensor; /* 012 - Sensor Type information */
+ char serial[8]; /* 013 - Board serial number */
+ char etheraddr[6]; /* 021 - Ethernet node addresse */
+ char revision[2]; /* 027 - Revision code */
+ char option[3]; /* 029 - resevered for options */
} revinfo;
/* ------------------------------------------------------------------------- */
-static const unsigned int sdram_table[] =
-{
- /* read single beat cycle */
- 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
- 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
+static const unsigned int sdram_table[] = {
+ /* read single beat cycle */
+ 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
+ 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
- /* read burst cycle */
- 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
- 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ /* read burst cycle */
+ 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
+ 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- /* write single beat cycle */
- 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ /* write single beat cycle */
+ 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- /* write burst cycle */
- 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
- 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ /* write burst cycle */
+ 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
+ 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- /* periodic timer expired */
- 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
- 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ /* periodic timer expired */
+ 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
+ 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- /* exception */
- 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
+ /* exception */
+ 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
};
/* ------------------------------------------------------------------------- */
int board_early_init_f (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
- /* reset the port A s.a. cpm-routines */
- ip->iop_padat = 0x0000;
- ip->iop_papar = 0x0000;
- ip->iop_padir = 0x0800;
- ip->iop_paodr = 0x0000;
+ /* reset the port A s.a. cpm-routines */
+ ip->iop_padat = 0x0000;
+ ip->iop_papar = 0x0000;
+ ip->iop_padir = 0x0800;
+ ip->iop_paodr = 0x0000;
- /* reset the port B for digital and LCD output */
- cp->cp_pbdat = 0x0300;
- cp->cp_pbpar = 0x5001;
- cp->cp_pbdir = 0x5301;
- cp->cp_pbodr = 0x0000;
+ /* reset the port B for digital and LCD output */
+ cp->cp_pbdat = 0x0300;
+ cp->cp_pbpar = 0x5001;
+ cp->cp_pbdir = 0x5301;
+ cp->cp_pbodr = 0x0000;
- /* reset the port C configured for SMC1 serial port and aqc. control */
- ip->iop_pcdat = 0x0800;
- ip->iop_pcpar = 0x0000;
- ip->iop_pcdir = 0x0e30;
- ip->iop_pcso = 0x0000;
+ /* reset the port C configured for SMC1 serial port and aqc. control */
+ ip->iop_pcdat = 0x0800;
+ ip->iop_pcpar = 0x0000;
+ ip->iop_pcdir = 0x0e30;
+ ip->iop_pcso = 0x0000;
- /* Config port D for LCD output */
- ip->iop_pdpar = 0x1fff;
- ip->iop_pddir = 0x1fff;
+ /* Config port D for LCD output */
+ ip->iop_pdpar = 0x1fff;
+ ip->iop_pddir = 0x1fff;
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -142,322 +141,327 @@
*/
int checkboard (void)
{
- puts ("Board: ELTEC miniHiperCam\n");
- return(0);
+ puts ("Board: ELTEC miniHiperCam\n");
+ return (0);
}
/* ------------------------------------------------------------------------- */
-int misc_init_r(void)
+int misc_init_r (void)
{
- revinfo mhpcRevInfo;
- char nid[32];
- char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
- "OMNIVISON OV7110 b&w", NULL };
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
- int i;
+ revinfo mhpcRevInfo;
+ char nid[32];
+ char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
+ "OMNIVISON OV7110 b&w", NULL
+ };
+ char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+ 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+ };
+ int i;
- /* check revision data */
- eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
+ /* check revision data */
+ eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo, 32);
- if (strncmp((char *)&mhpcRevInfo.board[2], "MHPC", 4) != 0)
- {
- printf ("Enter revision number (0-9): %c ", mhpcRevInfo.revision[0]);
- if (0 != readline (NULL))
- {
- mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]);
- }
+ if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
+ printf ("Enter revision number (0-9): %c ",
+ mhpcRevInfo.revision[0]);
+ if (0 != readline (NULL)) {
+ mhpcRevInfo.revision[0] =
+ (char) toupper (console_buffer[0]);
+ }
- printf ("Enter revision character (A-Z): %c ", mhpcRevInfo.revision[1]);
- if (1 == readline (NULL))
- {
- mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]);
- }
+ printf ("Enter revision character (A-Z): %c ",
+ mhpcRevInfo.revision[1]);
+ if (1 == readline (NULL)) {
+ mhpcRevInfo.revision[1] =
+ (char) toupper (console_buffer[0]);
+ }
- printf("Enter board name (V-XXXX-XXXX): %s ", (char *)&mhpcRevInfo.board);
- if (11 == readline (NULL))
- {
- for (i=0; i<11; i++)
- {
- mhpcRevInfo.board[i] = (char)toupper(console_buffer[i]);
- mhpcRevInfo.board[11] = '\0';
- }
- }
+ printf ("Enter board name (V-XXXX-XXXX): %s ",
+ (char *) &mhpcRevInfo.board);
+ if (11 == readline (NULL)) {
+ for (i = 0; i < 11; i++) {
+ mhpcRevInfo.board[i] =
+ (char) toupper (console_buffer[i]);
+ mhpcRevInfo.board[11] = '\0';
+ }
+ }
- printf("Supported sensor types:\n");
- i=0;
- do
- {
- printf("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]);
- } while ( mhpcSensorTypes[++i] != NULL );
+ printf ("Supported sensor types:\n");
+ i = 0;
+ do {
+ printf ("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]);
+ } while (mhpcSensorTypes[++i] != NULL);
- do
- {
- printf("\nEnter sensor number (0-255): %d ", (int)mhpcRevInfo.sensor );
- if (0 != readline (NULL))
- {
- mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10);
- }
- } while ( mhpcRevInfo.sensor >= i );
+ do {
+ printf ("\nEnter sensor number (0-255): %d ",
+ (int) mhpcRevInfo.sensor);
+ if (0 != readline (NULL)) {
+ mhpcRevInfo.sensor =
+ (unsigned char)
+ simple_strtoul (console_buffer, NULL,
+ 10);
+ }
+ } while (mhpcRevInfo.sensor >= i);
- printf("Enter serial number: %s ", (char *)&mhpcRevInfo.serial );
- if (6 == readline (NULL))
- {
- for (i=0; i<6; i++)
- {
- mhpcRevInfo.serial[i] = console_buffer[i];
- }
- mhpcRevInfo.serial[6] = '\0';
- }
+ printf ("Enter serial number: %s ",
+ (char *) &mhpcRevInfo.serial);
+ if (6 == readline (NULL)) {
+ for (i = 0; i < 6; i++) {
+ mhpcRevInfo.serial[i] = console_buffer[i];
+ }
+ mhpcRevInfo.serial[6] = '\0';
+ }
- printf("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ",
- mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
- mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
- mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5] );
- if (12 == readline (NULL))
- {
- for (i=0; i<12; i+=2)
- {
- mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
- hex[toupper(console_buffer[i+1])-'0']);
- }
- }
+ printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+ if (12 == readline (NULL)) {
+ for (i = 0; i < 12; i += 2) {
+ mhpcRevInfo.etheraddr[i >> 1] =
+ (char) (16 *
+ hex[toupper
+ (console_buffer[i]) -
+ '0'] +
+ hex[toupper
+ (console_buffer[i + 1]) -
+ '0']);
+ }
+ }
- /* setup new revision data */
- eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
- }
+ /* setup new revision data */
+ eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo,
+ 32);
+ }
- /* set environment */
- sprintf( nid, "%02x:%02x:%02x:%02x:%02x:%02x",
- mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
- mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
- mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
- setenv("ethaddr", nid);
+ /* set environment */
+ sprintf (nid, "%02x:%02x:%02x:%02x:%02x:%02x",
+ mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
+ mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
+ mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+ setenv ("ethaddr", nid);
- /* print actual board identification */
- printf("Ident: %s %s Ser %s Rev %c%c\n",
- mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"),
- (char *)&mhpcRevInfo.serial,
- mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]);
+ /* print actual board identification */
+ printf ("Ident: %s %s Ser %s Rev %c%c\n",
+ mhpcRevInfo.board,
+ (mhpcRevInfo.sensor == 0 ? "color" : "b&w"),
+ (char *) &mhpcRevInfo.serial, mhpcRevInfo.revision[0],
+ mhpcRevInfo.revision[1]);
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
- upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
- memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
- memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
- memctl->memc_mptpr = MPTPR_PTP_DIV64;
- memctl->memc_mar = 0x00008800;
+ memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
+ memctl->memc_mptpr = MPTPR_PTP_DIV64;
+ memctl->memc_mar = 0x00008800;
- /*
- * Map controller SDRAM bank 0
- */
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
- udelay(200);
+ /*
+ * Map controller SDRAM bank 0
+ */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+ udelay (200);
- /*
- * Map controller SDRAM bank 1
- */
- memctl->memc_or2 = CFG_OR2;
- memctl->memc_br2 = CFG_BR2;
+ /*
+ * Map controller SDRAM bank 1
+ */
+ memctl->memc_or2 = CFG_OR2;
+ memctl->memc_br2 = CFG_BR2;
- /*
- * Perform SDRAM initializsation sequence
- */
- memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
- udelay(1);
- memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */
- udelay(1);
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+ /*
+ * Perform SDRAM initializsation sequence
+ */
+ memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */
+ udelay (1);
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
- udelay(10000);
+ udelay (10000);
- /* leave place for framebuffers */
- return (SDRAM_MAX_SIZE-SDRAM_RES_SIZE);
+ /* leave place for framebuffers */
+ return (SDRAM_MAX_SIZE - SDRAM_RES_SIZE);
}
/* ------------------------------------------------------------------------- */
static void video_circle (char *center, int radius, int color, int pitch)
{
- int x,y,d,dE,dSE;
+ int x, y, d, dE, dSE;
- x = 0;
- y = radius;
- d = 1-radius;
- dE = 3;
- dSE = -2*radius+5;
+ x = 0;
+ y = radius;
+ d = 1 - radius;
+ dE = 3;
+ dSE = -2 * radius + 5;
- *(center+x+y*pitch) = color;
- *(center+y+x*pitch) = color;
- *(center+y-x*pitch) = color;
- *(center+x-y*pitch) = color;
- *(center-x-y*pitch) = color;
- *(center-y-x*pitch) = color;
- *(center-y+x*pitch) = color;
- *(center-x+y*pitch) = color;
- while(y>x)
- {
- if (d<0)
- {
- d += dE;
- dE += 2;
- dSE += 2;
- x++;
+ *(center + x + y * pitch) = color;
+ *(center + y + x * pitch) = color;
+ *(center + y - x * pitch) = color;
+ *(center + x - y * pitch) = color;
+ *(center - x - y * pitch) = color;
+ *(center - y - x * pitch) = color;
+ *(center - y + x * pitch) = color;
+ *(center - x + y * pitch) = color;
+ while (y > x) {
+ if (d < 0) {
+ d += dE;
+ dE += 2;
+ dSE += 2;
+ x++;
+ } else {
+ d += dSE;
+ dE += 2;
+ dSE += 4;
+ x++;
+ y--;
+ }
+ *(center + x + y * pitch) = color;
+ *(center + y + x * pitch) = color;
+ *(center + y - x * pitch) = color;
+ *(center + x - y * pitch) = color;
+ *(center - x - y * pitch) = color;
+ *(center - y - x * pitch) = color;
+ *(center - y + x * pitch) = color;
+ *(center - x + y * pitch) = color;
}
- else
- {
- d += dSE;
- dE += 2;
- dSE += 4;
- x++;
- y--;
- }
- *(center+x+y*pitch) = color;
- *(center+y+x*pitch) = color;
- *(center+y-x*pitch) = color;
- *(center+x-y*pitch) = color;
- *(center-x-y*pitch) = color;
- *(center-y-x*pitch) = color;
- *(center-y+x*pitch) = color;
- *(center-x+y*pitch) = color;
- }
}
/* ------------------------------------------------------------------------- */
-static void video_test_image(void)
+static void video_test_image (void)
{
- char *di;
- int i, n;
+ char *di;
+ int i, n;
- /* draw raster */
- for (i=0; i<LCD_VIDEO_ROWS; i+=32)
- {
- memset((char*)(LCD_VIDEO_ADDR+i*LCD_VIDEO_COLS), LCD_VIDEO_FG, LCD_VIDEO_COLS);
- for (n=i+1;n<i+32;n++)
- memset((char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS), LCD_VIDEO_BG, LCD_VIDEO_COLS);
- }
+ /* draw raster */
+ for (i = 0; i < LCD_VIDEO_ROWS; i += 32) {
+ memset ((char *) (LCD_VIDEO_ADDR + i * LCD_VIDEO_COLS),
+ LCD_VIDEO_FG, LCD_VIDEO_COLS);
+ for (n = i + 1; n < i + 32; n++)
+ memset ((char *) (LCD_VIDEO_ADDR +
+ n * LCD_VIDEO_COLS), LCD_VIDEO_BG,
+ LCD_VIDEO_COLS);
+ }
- for (i=0; i<LCD_VIDEO_COLS; i+=32)
- {
- for (n=0; n<LCD_VIDEO_ROWS; n++)
- *(char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS+i) = LCD_VIDEO_FG;
- }
+ for (i = 0; i < LCD_VIDEO_COLS; i += 32) {
+ for (n = 0; n < LCD_VIDEO_ROWS; n++)
+ *(char *) (LCD_VIDEO_ADDR + n * LCD_VIDEO_COLS + i) =
+ LCD_VIDEO_FG;
+ }
- /* draw gray bar */
- di = (char *)(LCD_VIDEO_ADDR + (LCD_VIDEO_COLS-256)/64*32 + 97*LCD_VIDEO_COLS);
- for (n=0; n<63; n++)
- {
- for (i=0; i<256; i++)
- {
- *di++ = (char)i;
- *(di+LCD_VIDEO_COLS*64) = (i&1)*255;
+ /* draw gray bar */
+ di = (char *) (LCD_VIDEO_ADDR + (LCD_VIDEO_COLS - 256) / 64 * 32 +
+ 97 * LCD_VIDEO_COLS);
+ for (n = 0; n < 63; n++) {
+ for (i = 0; i < 256; i++) {
+ *di++ = (char) i;
+ *(di + LCD_VIDEO_COLS * 64) = (i & 1) * 255;
+ }
+ di += LCD_VIDEO_COLS - 256;
}
- di += LCD_VIDEO_COLS-256;
- }
- video_circle ((char*)LCD_VIDEO_ADDR+LCD_VIDEO_COLS/2+LCD_VIDEO_ROWS/2*LCD_VIDEO_COLS,
- LCD_VIDEO_ROWS/2,LCD_VIDEO_FG, LCD_VIDEO_COLS);
+ video_circle ((char *) LCD_VIDEO_ADDR + LCD_VIDEO_COLS / 2 +
+ LCD_VIDEO_ROWS / 2 * LCD_VIDEO_COLS, LCD_VIDEO_ROWS / 2,
+ LCD_VIDEO_FG, LCD_VIDEO_COLS);
}
/* ------------------------------------------------------------------------- */
static void video_default_lut (unsigned int clut_type)
{
- unsigned int i;
- unsigned char RGB[] =
- {
- 0x00, 0x00, 0x00, /* black */
- 0x80, 0x80, 0x80, /* gray */
- 0xff, 0x00, 0x00, /* red */
- 0x00, 0xff, 0x00, /* green */
- 0x00, 0x00, 0xff, /* blue */
- 0x00, 0xff, 0xff, /* cyan */
- 0xff, 0x00, 0xff, /* magenta */
- 0xff, 0xff, 0x00, /* yellow */
- 0x80, 0x00, 0x00, /* dark red */
- 0x00, 0x80, 0x00, /* dark green */
- 0x00, 0x00, 0x80, /* dark blue */
- 0x00, 0x80, 0x80, /* dark cyan */
- 0x80, 0x00, 0x80, /* dark magenta */
- 0x80, 0x80, 0x00, /* dark yellow */
- 0xc0, 0xc0, 0xc0, /* light gray */
- 0xff, 0xff, 0xff, /* white */
+ unsigned int i;
+ unsigned char RGB[] = {
+ 0x00, 0x00, 0x00, /* black */
+ 0x80, 0x80, 0x80, /* gray */
+ 0xff, 0x00, 0x00, /* red */
+ 0x00, 0xff, 0x00, /* green */
+ 0x00, 0x00, 0xff, /* blue */
+ 0x00, 0xff, 0xff, /* cyan */
+ 0xff, 0x00, 0xff, /* magenta */
+ 0xff, 0xff, 0x00, /* yellow */
+ 0x80, 0x00, 0x00, /* dark red */
+ 0x00, 0x80, 0x00, /* dark green */
+ 0x00, 0x00, 0x80, /* dark blue */
+ 0x00, 0x80, 0x80, /* dark cyan */
+ 0x80, 0x00, 0x80, /* dark magenta */
+ 0x80, 0x80, 0x00, /* dark yellow */
+ 0xc0, 0xc0, 0xc0, /* light gray */
+ 0xff, 0xff, 0xff, /* white */
};
- switch (clut_type)
- {
- case 1:
- for (i=0; i<240; i++)
- video_set_lut (i, i, i, i);
- for (i=0; i<16; i++)
- video_set_lut (i+240, RGB[i*3], RGB[i*3+1], RGB[i*3+2]);
- break;
- default:
- for (i=0; i<256; i++)
- video_set_lut (i, i, i, i);
- }
+ switch (clut_type) {
+ case 1:
+ for (i = 0; i < 240; i++)
+ video_set_lut (i, i, i, i);
+ for (i = 0; i < 16; i++)
+ video_set_lut (i + 240, RGB[i * 3], RGB[i * 3 + 1],
+ RGB[i * 3 + 2]);
+ break;
+ default:
+ for (i = 0; i < 256; i++)
+ video_set_lut (i, i, i, i);
+ }
}
/* ------------------------------------------------------------------------- */
void *video_hw_init (void)
{
- unsigned int clut = 0;
- unsigned char *penv;
- immap_t *immr = (immap_t *) CFG_IMMR;
+ unsigned int clut = 0;
+ unsigned char *penv;
+ immap_t *immr = (immap_t *) CFG_IMMR;
- /* enable video only on CLUT value */
- if ((penv = getenv ("clut")) != NULL)
- clut = (u_int)simple_strtoul (penv, NULL, 10);
- else
- return NULL;
+ /* enable video only on CLUT value */
+ if ((penv = getenv ("clut")) != NULL)
+ clut = (u_int) simple_strtoul (penv, NULL, 10);
+ else
+ return NULL;
- /* disable graphic before write LCD regs. */
- immr->im_lcd.lcd_lccr = 0x96000866;
+ /* disable graphic before write LCD regs. */
+ immr->im_lcd.lcd_lccr = 0x96000866;
- /* config LCD regs. */
- immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
- immr->im_lcd.lcd_lchcr = 0x010a0093;
- immr->im_lcd.lcd_lcvcr = 0x900f0024;
+ /* config LCD regs. */
+ immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
+ immr->im_lcd.lcd_lchcr = 0x010a0093;
+ immr->im_lcd.lcd_lcvcr = 0x900f0024;
- printf ("Video: 640x480 8Bit Index Lut %s\n",
- (clut==1?"240/16 (gray/vga)":"256(gray)"));
+ printf ("Video: 640x480 8Bit Index Lut %s\n",
+ (clut == 1 ? "240/16 (gray/vga)" : "256(gray)"));
- video_default_lut (clut);
+ video_default_lut (clut);
- /* clear framebuffer */
- memset ( (char*)(LCD_VIDEO_ADDR), LCD_VIDEO_BG, LCD_VIDEO_ROWS*LCD_VIDEO_COLS );
+ /* clear framebuffer */
+ memset ((char *) (LCD_VIDEO_ADDR), LCD_VIDEO_BG,
+ LCD_VIDEO_ROWS * LCD_VIDEO_COLS);
- /* enable graphic */
- immr->im_lcd.lcd_lccr = 0x96000867;
+ /* enable graphic */
+ immr->im_lcd.lcd_lccr = 0x96000867;
- /* fill in Graphic Device */
- gdev.frameAdrs = LCD_VIDEO_ADDR;
- gdev.winSizeX = LCD_VIDEO_COLS;
- gdev.winSizeY = LCD_VIDEO_ROWS;
- gdev.gdfBytesPP = 1;
- gdev.gdfIndex = GDF__8BIT_INDEX;
+ /* fill in Graphic Device */
+ gdev.frameAdrs = LCD_VIDEO_ADDR;
+ gdev.winSizeX = LCD_VIDEO_COLS;
+ gdev.winSizeY = LCD_VIDEO_ROWS;
+ gdev.gdfBytesPP = 1;
+ gdev.gdfIndex = GDF__8BIT_INDEX;
- if (clut > 1)
- /* return Graphic Device for console */
- return (void *)&gdev;
- else
- /* just graphic enabled - draw something beautiful */
- video_test_image();
+ if (clut > 1)
+ /* return Graphic Device for console */
+ return (void *) &gdev;
+ else
+ /* just graphic enabled - draw something beautiful */
+ video_test_image ();
- return NULL; /* this disabels cfb - console */
+ return NULL; /* this disabels cfb - console */
}
/* ------------------------------------------------------------------------- */
@@ -465,13 +469,15 @@
void video_set_lut (unsigned int index,
unsigned char r, unsigned char g, unsigned char b)
{
- unsigned int lum;
- unsigned short *pLut = (unsigned short *)(CFG_IMMR + 0x0e00);
+ unsigned int lum;
+ unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
- /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
- /* y = 0.299*R + 0.587*G + 0.114*B */
- lum = (2990*r + 5870*g + 1140*b)/10000;
- pLut[index] = ((b & 0xc0)<<4) | ((g & 0xc0)<<2) | (r & 0xc0) | (lum & 0x3f);
+ /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
+ /* y = 0.299*R + 0.587*G + 0.114*B */
+ lum = (2990 * r + 5870 * g + 1140 * b) / 10000;
+ pLut[index] =
+ ((b & 0xc0) << 4) | ((g & 0xc0) << 2) | (r & 0xc0) | (lum &
+ 0x3f);
}
/* ------------------------------------------------------------------------- */
diff --git a/board/ep8260/ep8260.c b/board/ep8260/ep8260.c
index 7a2c23f..fb4d325 100644
--- a/board/ep8260/ep8260.c
+++ b/board/ep8260/ep8260.c
@@ -190,21 +190,22 @@
*/
int board_early_init_f (void)
{
- volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- memctl->memc_br4 = CFG_BR4_PRELIM;
- memctl->memc_or4 = CFG_OR4_PRELIM;
- regs->bcsr1 = 0x62; /* to enable terminal on SMC1 */
- regs->bcsr2 = 0x30; /* enable NVRAM and writing FLASH */
- return 0;
+ volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+
+ memctl->memc_br4 = CFG_BR4_PRELIM;
+ memctl->memc_or4 = CFG_OR4_PRELIM;
+ regs->bcsr1 = 0x62; /* to enable terminal on SMC1 */
+ regs->bcsr2 = 0x30; /* enable NVRAM and writing FLASH */
+ return 0;
}
-void
-reset_phy(void)
+void reset_phy (void)
{
- volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
- regs->bcsr4 = 0xC0;
+ volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
+
+ regs->bcsr4 = 0xC0;
}
/*
@@ -213,15 +214,21 @@
* Thats why its a static interpretation ...
*/
-int
-checkboard(void)
+int checkboard (void)
{
- volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
- uint major=0, minor=0;
+ volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
+ uint major = 0, minor = 0;
+
switch (regs->bcsr0) {
- case 0x02: major = 1; break;
- case 0x03: major = 1; minor = 1; break;
- default: break;
+ case 0x02:
+ major = 1;
+ break;
+ case 0x03:
+ major = 1;
+ minor = 1;
+ break;
+ default:
+ break;
}
printf ("Board: Embedded Planet EP8260, Revision %d.%d\n",
major, minor);
@@ -232,13 +239,13 @@
/* ------------------------------------------------------------------------- */
-long int
-initdram(int board_type)
+long int initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar c = 0;
- volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE) + 0x110;
+ volatile uchar *ramaddr = (uchar *) (CFG_SDRAM_BASE) + 0x110;
+
/*
ulong psdmr = CFG_PSDMR;
#ifdef CFG_LSDRAM
@@ -288,7 +295,7 @@
#ifndef CFG_RAMBOOT
#ifdef CFG_LSDRAM
size += CFG_SDRAM1_SIZE;
- ramaddr = (uchar *)(CFG_SDRAM1_BASE) + 0x8c;
+ ramaddr = (uchar *) (CFG_SDRAM1_BASE) + 0x8c;
memctl->memc_lsrt = CFG_LSRT;
memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_PREA;
diff --git a/board/evb64260/ecctest.c b/board/evb64260/ecctest.c
index e7c58b3..5d3679a 100644
--- a/board/evb64260/ecctest.c
+++ b/board/evb64260/ecctest.c
@@ -1,91 +1,111 @@
+indent: Standard input:27: Warning:old style assignment ambiguity in "=*". Assuming "= *"
+
#ifdef ECC_TEST
-static inline void ecc_off(void)
+static inline void ecc_off (void)
{
- *(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) &= ~0x00200000;
+ *(volatile int *) (INTERNAL_REG_BASE_ADDR + 0x4b4) &= ~0x00200000;
}
-static inline void ecc_on(void)
+static inline void ecc_on (void)
{
- *(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) |= 0x00200000;
+ *(volatile int *) (INTERNAL_REG_BASE_ADDR + 0x4b4) |= 0x00200000;
}
-static int putshex(const char *buf, int len)
+static int putshex (const char *buf, int len)
{
- int i;
- for (i=0;i<len;i++) {
- printf("%02x", buf[i]);
- }
- return 0;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ printf ("%02x", buf[i]);
+ }
+ return 0;
}
-static int char_memcpy(void *d, const void *s, int len)
+static int char_memcpy (void *d, const void *s, int len)
{
- int i;
- char *cd=d;
- const char *cs=s;
- for(i=0;i<len;i++) {
- *(cd++)=*(cs++);
- }
- return 0;
+ int i;
+ char *cd = d;
+ const char *cs = s;
+
+ for (i = 0; i < len; i++) {
+ *(cd++) = *(cs++);
+ }
+ return 0;
}
-static int memory_test(char *buf)
+static int memory_test (char *buf)
{
- const char src[][16]={
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
- {0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
- {0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02},
- {0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04},
- {0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08},
- {0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10},
- {0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20},
- {0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40},
- {0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},
- {0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55},
- {0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa},
- {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}
- };
- const int foo[] = {0};
- int i,j,a;
+ const char src[][16] = {
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01},
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+ 0x02, 0x02, 0x02, 0x02, 0x02, 0x02},
+ {0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x04, 0x04, 0x04},
+ {0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x08},
+ {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x10, 0x10, 0x10, 0x10},
+ {0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20},
+ {0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40},
+ {0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80},
+ {0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+ 0x55, 0x55, 0x55, 0x55, 0x55, 0x55},
+ {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa},
+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}
+ };
+ const int foo[] = { 0 };
+ int i, j, a;
- printf("\ntest @ %d %p\n", foo[0], buf);
- for(i=0;i<12;i++) {
- for(a=0;a<8;a++) {
- const char *s=src[i]+a;
- int align=(unsigned)(s)&0x7;
- /* ecc_off(); */
- memcpy(buf,s,8);
- /* ecc_on(); */
- putshex(s,8);
- if(memcmp(buf,s,8)) {
- putc('\n');
- putshex(buf,8);
- printf(" [FAIL] (%p) align=%d\n", s, align);
- for(j=0;j<8;j++) {
- s[j]==buf[j]?puts(" "):printf("%02x", (s[j])^(buf[j]));
- }
- putc('\n');
- } else {
- printf(" [PASS] (%p) align=%d\n", s, align);
- }
- /* ecc_off(); */
- char_memcpy(buf,s,8);
- /* ecc_on(); */
- putshex(s,8);
- if(memcmp(buf,s,8)) {
- putc('\n');
- putshex(buf,8);
- printf(" [FAIL] (%p) align=%d\n", s, align);
- for(j=0;j<8;j++) {
- s[j]==buf[j]?puts(" "):printf("%02x", (s[j])^(buf[j]));
+ printf ("\ntest @ %d %p\n", foo[0], buf);
+ for (i = 0; i < 12; i++) {
+ for (a = 0; a < 8; a++) {
+ const char *s = src[i] + a;
+ int align = (unsigned) (s) & 0x7;
+
+ /* ecc_off(); */
+ memcpy (buf, s, 8);
+ /* ecc_on(); */
+ putshex (s, 8);
+ if (memcmp (buf, s, 8)) {
+ putc ('\n');
+ putshex (buf, 8);
+ printf (" [FAIL] (%p) align=%d\n", s, align);
+ for (j = 0; j < 8; j++) {
+ s[j] == buf[j] ? puts (" ") :
+ printf ("%02x",
+ (s[j]) ^ (buf[j]));
+ }
+ putc ('\n');
+ } else {
+ printf (" [PASS] (%p) align=%d\n", s, align);
+ }
+ /* ecc_off(); */
+ char_memcpy (buf, s, 8);
+ /* ecc_on(); */
+ putshex (s, 8);
+ if (memcmp (buf, s, 8)) {
+ putc ('\n');
+ putshex (buf, 8);
+ printf (" [FAIL] (%p) align=%d\n", s, align);
+ for (j = 0; j < 8; j++) {
+ s[j] == buf[j] ? puts (" ") :
+ printf ("%02x",
+ (s[j]) ^ (buf[j]));
+ }
+ putc ('\n');
+ } else {
+ printf (" [PASS] (%p) align=%d\n", s, align);
+ }
}
- putc('\n');
- } else {
- printf(" [PASS] (%p) align=%d\n", s, align);
- }
}
- }
- return 0;
+ return 0;
}
#endif
diff --git a/board/evb64260/eth_addrtbl.c b/board/evb64260/eth_addrtbl.c
index ef463c3..0abc7d4 100644
--- a/board/evb64260/eth_addrtbl.c
+++ b/board/evb64260/eth_addrtbl.c
@@ -13,66 +13,68 @@
#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
-static u32 addressTableHashMode[ GAL_ETH_DEVS ] = { 0, };
-static u32 addressTableHashSize[ GAL_ETH_DEVS ] = { 0, };
-static addrTblEntry *addressTableBase[ GAL_ETH_DEVS ] = { 0, };
-static void *realAddrTableBase[ GAL_ETH_DEVS ] = { 0, };
+static u32 addressTableHashMode[GAL_ETH_DEVS] = { 0, };
+static u32 addressTableHashSize[GAL_ETH_DEVS] = { 0, };
+static addrTblEntry *addressTableBase[GAL_ETH_DEVS] = { 0, };
+static void *realAddrTableBase[GAL_ETH_DEVS] = { 0, };
-static const u32 hashLength[ 2 ] = {
- (0x8000), /* 8K * 4 entries */
- (0x8000/16), /* 512 * 4 entries */
+static const u32 hashLength[2] = {
+ (0x8000), /* 8K * 4 entries */
+ (0x8000 / 16), /* 512 * 4 entries */
};
/* Initialize the address table for a port, if needed */
-unsigned int initAddressTable( u32 port, u32 hashMode, u32 hashSizeSelector)
+unsigned int initAddressTable (u32 port, u32 hashMode, u32 hashSizeSelector)
{
- unsigned int tableBase;
+ unsigned int tableBase;
- if( port < 0 || port >= GAL_ETH_DEVS ) {
- printf("%s: Invalid port number %d\n", __FUNCTION__, port );
+ if (port < 0 || port >= GAL_ETH_DEVS) {
+ printf ("%s: Invalid port number %d\n", __FUNCTION__, port);
return 0;
}
if (hashMode > 1) {
- printf("%s: Invalid Hash Mode %d\n", __FUNCTION__, port );
+ printf ("%s: Invalid Hash Mode %d\n", __FUNCTION__, port);
return 0;
}
- if ( realAddrTableBase[port] &&
- ( addressTableHashSize[port] != hashSizeSelector )) {
+ if (realAddrTableBase[port] &&
+ (addressTableHashSize[port] != hashSizeSelector)) {
/* we have been here before,
* but now we want a different sized table
*/
- free( realAddrTableBase[port] );
+ free (realAddrTableBase[port]);
realAddrTableBase[port] = 0;
addressTableBase[port] = 0;
}
- tableBase = (unsigned int)addressTableBase[port];
+ tableBase = (unsigned int) addressTableBase[port];
/* we get called for every probe, so only do this once */
- if ( !tableBase ) {
- int bytes = hashLength[hashSizeSelector] * sizeof(addrTblEntry);
+ if (!tableBase) {
+ int bytes =
+ hashLength[hashSizeSelector] * sizeof (addrTblEntry);
- tableBase = (unsigned int)realAddrTableBase[port] = malloc(bytes+64);
+ tableBase = (unsigned int) realAddrTableBase[port] =
+ malloc (bytes + 64);
- if(!tableBase)
- {
- printf("%s: alloc memory failed \n", __FUNCTION__);
+ if (!tableBase) {
+ printf ("%s: alloc memory failed \n", __FUNCTION__);
return 0;
}
- /* align to octal byte */
- if(tableBase&63) tableBase=(tableBase+63) & ~63;
+ /* align to octal byte */
+ if (tableBase & 63)
+ tableBase = (tableBase + 63) & ~63;
- addressTableHashMode[port] = hashMode;
- addressTableHashSize[port] = hashSizeSelector;
- addressTableBase[port] = (addrTblEntry *)tableBase;
+ addressTableHashMode[port] = hashMode;
+ addressTableHashSize[port] = hashSizeSelector;
+ addressTableBase[port] = (addrTblEntry *) tableBase;
- memset((void *)tableBase,0,bytes);
+ memset ((void *) tableBase, 0, bytes);
}
- return tableBase;
+ return tableBase;
}
/*
@@ -87,61 +89,61 @@
* Outputs
* return the calculated entry.
*/
-u32
-hashTableFunction( u32 macH, u32 macL, u32 HashSize, u32 hash_mode)
+u32 hashTableFunction (u32 macH, u32 macL, u32 HashSize, u32 hash_mode)
{
- u32 hashResult;
- u32 addrH;
- u32 addrL;
- u32 addr0;
- u32 addr1;
- u32 addr2;
- u32 addr3;
- u32 addrHSwapped;
- u32 addrLSwapped;
+ u32 hashResult;
+ u32 addrH;
+ u32 addrL;
+ u32 addr0;
+ u32 addr1;
+ u32 addr2;
+ u32 addr3;
+ u32 addrHSwapped;
+ u32 addrLSwapped;
- addrH = NIBBLE_SWAPPING_16_BIT( macH );
- addrL = NIBBLE_SWAPPING_32_BIT( macL );
+ addrH = NIBBLE_SWAPPING_16_BIT (macH);
+ addrL = NIBBLE_SWAPPING_32_BIT (macL);
- addrHSwapped = FLIP_4_BITS( addrH & 0xf )
- + ((FLIP_4_BITS( (addrH >> 4) & 0xf)) << 4)
- + ((FLIP_4_BITS( (addrH >> 8) & 0xf)) << 8)
- + ((FLIP_4_BITS( (addrH >> 12) & 0xf)) << 12);
+ addrHSwapped = FLIP_4_BITS (addrH & 0xf)
+ + ((FLIP_4_BITS ((addrH >> 4) & 0xf)) << 4)
+ + ((FLIP_4_BITS ((addrH >> 8) & 0xf)) << 8)
+ + ((FLIP_4_BITS ((addrH >> 12) & 0xf)) << 12);
- addrLSwapped = FLIP_4_BITS( addrL & 0xf )
- + ((FLIP_4_BITS( (addrL >> 4) & 0xf)) << 4)
- + ((FLIP_4_BITS( (addrL >> 8) & 0xf)) << 8)
- + ((FLIP_4_BITS( (addrL >> 12) & 0xf)) << 12)
- + ((FLIP_4_BITS( (addrL >> 16) & 0xf)) << 16)
- + ((FLIP_4_BITS( (addrL >> 20) & 0xf)) << 20)
- + ((FLIP_4_BITS( (addrL >> 24) & 0xf)) << 24)
- + ((FLIP_4_BITS( (addrL >> 28) & 0xf)) << 28);
+ addrLSwapped = FLIP_4_BITS (addrL & 0xf)
+ + ((FLIP_4_BITS ((addrL >> 4) & 0xf)) << 4)
+ + ((FLIP_4_BITS ((addrL >> 8) & 0xf)) << 8)
+ + ((FLIP_4_BITS ((addrL >> 12) & 0xf)) << 12)
+ + ((FLIP_4_BITS ((addrL >> 16) & 0xf)) << 16)
+ + ((FLIP_4_BITS ((addrL >> 20) & 0xf)) << 20)
+ + ((FLIP_4_BITS ((addrL >> 24) & 0xf)) << 24)
+ + ((FLIP_4_BITS ((addrL >> 28) & 0xf)) << 28);
- addrH = addrHSwapped;
- addrL = addrLSwapped;
+ addrH = addrHSwapped;
+ addrL = addrLSwapped;
- if( hash_mode == 0 ) {
- addr0 = (addrL >> 2) & 0x03f;
- addr1 = (addrL & 0x003) | ((addrL >> 8) & 0x7f) << 2;
- addr2 = (addrL >> 15) & 0x1ff;
- addr3 = ((addrL >> 24) & 0x0ff) | ((addrH & 1) << 8);
- } else {
- addr0 = FLIP_6_BITS( addrL & 0x03f );
- addr1 = FLIP_9_BITS( ((addrL >> 6) & 0x1ff));
- addr2 = FLIP_9_BITS( (addrL >> 15) & 0x1ff);
- addr3 = FLIP_9_BITS( (((addrL >> 24) & 0x0ff) | ((addrH & 0x1) << 8)));
- }
+ if (hash_mode == 0) {
+ addr0 = (addrL >> 2) & 0x03f;
+ addr1 = (addrL & 0x003) | ((addrL >> 8) & 0x7f) << 2;
+ addr2 = (addrL >> 15) & 0x1ff;
+ addr3 = ((addrL >> 24) & 0x0ff) | ((addrH & 1) << 8);
+ } else {
+ addr0 = FLIP_6_BITS (addrL & 0x03f);
+ addr1 = FLIP_9_BITS (((addrL >> 6) & 0x1ff));
+ addr2 = FLIP_9_BITS ((addrL >> 15) & 0x1ff);
+ addr3 = FLIP_9_BITS ((((addrL >> 24) & 0x0ff) |
+ ((addrH & 0x1) << 8)));
+ }
- hashResult = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
+ hashResult = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
- if( HashSize == _8K_TABLE ) {
- hashResult = hashResult & 0xffff;
- } else {
- hashResult = hashResult & 0x07ff;
- }
+ if (HashSize == _8K_TABLE) {
+ hashResult = hashResult & 0xffff;
+ } else {
+ hashResult = hashResult & 0x07ff;
+ }
- return( hashResult );
+ return (hashResult);
}
@@ -160,66 +162,59 @@
* TRUE if success.
* FALSE if table full
*/
-int
-addAddressTableEntry(
- u32 port,
- u32 macH,
- u32 macL,
- u32 rd,
- u32 skip )
+int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
{
- addrTblEntry *entry;
- u32 newHi;
- u32 newLo;
- u32 i;
+ addrTblEntry *entry;
+ u32 newHi;
+ u32 newLo;
+ u32 i;
- newLo = (((macH >> 4) & 0xf) << 15)
- | (((macH >> 0) & 0xf) << 11)
- | (((macH >> 12) & 0xf) << 7)
- | (((macH >> 8) & 0xf) << 3)
- | (((macL >> 20) & 0x1) << 31)
- | (((macL >> 16) & 0xf) << 27)
- | (((macL >> 28) & 0xf) << 23)
- | (((macL >> 24) & 0xf) << 19)
- | (skip << SKIP_BIT) | (rd << 2) | VALID;
+ newLo = (((macH >> 4) & 0xf) << 15)
+ | (((macH >> 0) & 0xf) << 11)
+ | (((macH >> 12) & 0xf) << 7)
+ | (((macH >> 8) & 0xf) << 3)
+ | (((macL >> 20) & 0x1) << 31)
+ | (((macL >> 16) & 0xf) << 27)
+ | (((macL >> 28) & 0xf) << 23)
+ | (((macL >> 24) & 0xf) << 19)
+ | (skip << SKIP_BIT) | (rd << 2) | VALID;
- newHi = (((macL >> 4) & 0xf) << 15)
- | (((macL >> 0) & 0xf) << 11)
- | (((macL >> 12) & 0xf) << 7)
- | (((macL >> 8) & 0xf) << 3)
- | (((macL >> 21) & 0x7) << 0);
+ newHi = (((macL >> 4) & 0xf) << 15)
+ | (((macL >> 0) & 0xf) << 11)
+ | (((macL >> 12) & 0xf) << 7)
+ | (((macL >> 8) & 0xf) << 3)
+ | (((macL >> 21) & 0x7) << 0);
- /*
- * Pick the appropriate table, start scanning for free/reusable
- * entries at the index obtained by hashing the specified MAC address
- */
- entry = addressTableBase[port];
- entry += hashTableFunction( macH, macL, addressTableHashSize[port],
- addressTableHashMode[port] );
- for( i = 0; i < HOP_NUMBER; i++, entry++ ) {
- if( !(entry->lo & VALID) /*|| (entry->lo & SKIP)*/ ) {
- break;
- } else { /* if same address put in same position */
- if( ((entry->lo & 0xfffffff8) == (newLo & 0xfffffff8))
- && (entry->hi == newHi) )
- {
- break;
- }
+ /*
+ * Pick the appropriate table, start scanning for free/reusable
+ * entries at the index obtained by hashing the specified MAC address
+ */
+ entry = addressTableBase[port];
+ entry += hashTableFunction (macH, macL, addressTableHashSize[port],
+ addressTableHashMode[port]);
+ for (i = 0; i < HOP_NUMBER; i++, entry++) {
+ if (!(entry->lo & VALID) /*|| (entry->lo & SKIP) */ ) {
+ break;
+ } else { /* if same address put in same position */
+ if (((entry->lo & 0xfffffff8) == (newLo & 0xfffffff8))
+ && (entry->hi == newHi)) {
+ break;
+ }
+ }
}
- }
- if( i == HOP_NUMBER ) {
- PRINTF( "addGT64260addressTableEntry: table section is full\n" );
- return( FALSE );
- }
+ if (i == HOP_NUMBER) {
+ PRINTF ("addGT64260addressTableEntry: table section is full\n");
+ return (FALSE);
+ }
- /*
- * Update the selected entry
- */
- entry->hi = newHi;
- entry->lo = newLo;
- DCACHE_FLUSH_N_SYNC( (u32)entry, MAC_ENTRY_SIZE );
- return( TRUE );
+ /*
+ * Update the selected entry
+ */
+ entry->hi = newHi;
+ entry->lo = newLo;
+ DCACHE_FLUSH_N_SYNC ((u32) entry, MAC_ENTRY_SIZE);
+ return (TRUE);
}
#endif /* CONFIG_GT_USE_MAC_HASH_TABLE */
diff --git a/board/evb64260/pci.c b/board/evb64260/pci.c
index 22da746..e3172b2 100644
--- a/board/evb64260/pci.c
+++ b/board/evb64260/pci.c
@@ -9,50 +9,62 @@
static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
#ifdef CONFIG_ZUMA_V2
- {0,0,0,0,0,0,0,29, [8 ... PCI_MAX_DEVICES-1]=0},
- {0,0,0,0,0,0,0,28, [8 ... PCI_MAX_DEVICES-1]=0}
-#else /* EVB??? This is a guess */
- {0,0,0,0,0,0,0,27,27, [9 ... PCI_MAX_DEVICES-1]=0},
- {0,0,0,0,0,0,0,29,29, [9 ... PCI_MAX_DEVICES-1]=0}
+ {0, 0, 0, 0, 0, 0, 0, 29,[8...PCI_MAX_DEVICES - 1] = 0},
+ {0, 0, 0, 0, 0, 0, 0, 28,[8...PCI_MAX_DEVICES - 1] = 0}
+#else /* EVB??? This is a guess */
+ {0, 0, 0, 0, 0, 0, 0, 27, 27,[9...PCI_MAX_DEVICES - 1] = 0},
+ {0, 0, 0, 0, 0, 0, 0, 29, 29,[9...PCI_MAX_DEVICES - 1] = 0}
#endif
};
-static const unsigned int pci_p2p_configuration_reg[]={
- PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
+static const unsigned int pci_p2p_configuration_reg[] = {
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
-static const unsigned int pci_configuration_address[]={
- PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS};
+static const unsigned int pci_configuration_address[] = {
+ PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
+};
-static const unsigned int pci_configuration_data[]={
- PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
- PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER};
+static const unsigned int pci_configuration_data[] = {
+ PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
+ PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
+};
-static const unsigned int pci_error_cause_reg[]={
- PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE};
+static const unsigned int pci_error_cause_reg[] = {
+ PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
+};
-static const unsigned int pci_arbiter_control[]={
- PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL};
+static const unsigned int pci_arbiter_control[] = {
+ PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
+};
-static const unsigned int pci_snoop_control_base_0_low[]={
- PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW};
-static const unsigned int pci_snoop_control_top_0[]={
- PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0};
+static const unsigned int pci_snoop_control_base_0_low[] = {
+ PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_snoop_control_top_0[] = {
+ PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
+};
-static const unsigned int pci_access_control_base_0_low[]={
- PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW};
-static const unsigned int pci_access_control_top_0[]={
- PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0};
+static const unsigned int pci_access_control_base_0_low[] = {
+ PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
+};
+static const unsigned int pci_access_control_top_0[] = {
+ PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
+};
static const unsigned int pci_scs_bank_size[2][4] = {
- {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
- PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
- {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
- PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}};
+ {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
+ PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
+ {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
+ PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
+};
static const unsigned int pci_p2p_configuration[] = {
- PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION};
+ PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
+};
-static unsigned int local_buses[] = { 0, 0};
+static unsigned int local_buses[] = { 0, 0 };
+
/********************************************************************
* pciWriteConfigReg - Write to a PCI configuration register
* - Make sure the GT is configured as a master before writing
@@ -71,28 +83,33 @@
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
-void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,unsigned int pciDevNum,unsigned int data)
+void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum, unsigned int data)
{
- volatile unsigned int DataForAddrReg;
- unsigned int functionNum;
- unsigned int busNum = PCI_BUS(pciDevNum);
- unsigned int addr;
+ volatile unsigned int DataForAddrReg;
+ unsigned int functionNum;
+ unsigned int busNum = PCI_BUS (pciDevNum);
+ unsigned int addr;
- if(pciDevNum > 32) /* illegal device Number */
- return;
- if(pciDevNum == SELF) /* configure our configuration space. */
- {
- pciDevNum = (GTREGREAD(pci_p2p_configuration_reg[host]) >> 24) & 0x1f;
- busNum = GTREGREAD(pci_p2p_configuration_reg[host]) & 0xff0000;
- }
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xfc;
- DataForAddrReg = ( regOffset | pciDevNum | functionNum | busNum) | BIT31;
- GT_REG_WRITE(pci_configuration_address[host],DataForAddrReg);
- GT_REG_READ(pci_configuration_address[host], &addr);
- if (addr != DataForAddrReg) return;
- GT_REG_WRITE(pci_configuration_data[host],data);
+ if (pciDevNum > 32) /* illegal device Number */
+ return;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &addr);
+ if (addr != DataForAddrReg)
+ return;
+ GT_REG_WRITE (pci_configuration_data[host], data);
}
/********************************************************************
@@ -113,30 +130,34 @@
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
-unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,unsigned int pciDevNum)
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+ unsigned int pciDevNum)
{
- volatile unsigned int DataForAddrReg;
+ volatile unsigned int DataForAddrReg;
unsigned int data;
- unsigned int functionNum;
- unsigned int busNum = PCI_BUS(pciDevNum);
+ unsigned int functionNum;
+ unsigned int busNum = PCI_BUS (pciDevNum);
- if(pciDevNum > 32) /* illegal device Number */
- return 0xffffffff;
- if(pciDevNum == SELF) /* configure our configuration space. */
- {
- pciDevNum = (GTREGREAD(pci_p2p_configuration_reg[host]) >> 24) & 0x1f;
- busNum = GTREGREAD(pci_p2p_configuration_reg[host]) & 0xff0000;
- }
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xfc;
- DataForAddrReg = (regOffset | pciDevNum | functionNum | busNum) | BIT31 ;
- GT_REG_WRITE(pci_configuration_address[host],DataForAddrReg);
- GT_REG_READ(pci_configuration_address[host], &data);
- if (data != DataForAddrReg)
- return 0xffffffff;
- GT_REG_READ(pci_configuration_data[host], &data);
- return data;
+ if (pciDevNum > 32) /* illegal device Number */
+ return 0xffffffff;
+ if (pciDevNum == SELF) { /* configure our configuration space. */
+ pciDevNum =
+ (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
+ 0x1f;
+ busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
+ 0xff0000;
+ }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xfc;
+ DataForAddrReg =
+ (regOffset | pciDevNum | functionNum | busNum) | BIT31;
+ GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
+ GT_REG_READ (pci_configuration_address[host], &data);
+ if (data != DataForAddrReg)
+ return 0xffffffff;
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
}
/********************************************************************
@@ -161,37 +182,32 @@
* PCI spec referring to P2P.
*
*********************************************************************/
-void pciOverBridgeWriteConfigReg(PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum,unsigned int data)
+void pciOverBridgeWriteConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum, unsigned int data)
{
- unsigned int DataForReg;
- unsigned int functionNum;
+ unsigned int DataForReg;
+ unsigned int functionNum;
+
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
+ } else {
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT31 | BIT0;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ if (pciDevNum == SELF) { /* This board */
+ GT_REG_WRITE (pci_configuration_data[host], data);
+ } else { /* configuration Transaction over the pci. */
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xff;
- busNum = busNum << 16;
- if(pciDevNum == SELF) /* This board */
- {
- DataForReg = ( regOffset | pciDevNum | functionNum) | BIT0;
- }
- else
- {
- DataForReg = ( regOffset | pciDevNum | functionNum | busNum) |
- BIT31 | BIT0;
- }
- GT_REG_WRITE(pci_configuration_address[host],DataForReg);
- if(pciDevNum == SELF) /* This board */
- {
- GT_REG_WRITE(pci_configuration_data[host],data);
- }
- else /* configuration Transaction over the pci. */
- {
- /* The PCI is working in LE Mode So it swap the Data. */
- GT_REG_WRITE(pci_configuration_data[host],WORD_SWAP(data));
- }
+ /* The PCI is working in LE Mode So it swap the Data. */
+ GT_REG_WRITE (pci_configuration_data[host], WORD_SWAP (data));
+ }
}
@@ -216,39 +232,35 @@
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
-unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
- unsigned int regOffset,
- unsigned int pciDevNum,
- unsigned int busNum)
+unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
+ unsigned int regOffset,
+ unsigned int pciDevNum,
+ unsigned int busNum)
{
- unsigned int DataForReg;
- unsigned int data;
- unsigned int functionNum;
+ unsigned int DataForReg;
+ unsigned int data;
+ unsigned int functionNum;
- functionNum = regOffset & 0x00000700;
- pciDevNum = pciDevNum << 11;
- regOffset = regOffset & 0xff;
- busNum = busNum << 16;
- if (pciDevNum == SELF) /* This board */
- {
- DataForReg = (regOffset | pciDevNum | functionNum) | BIT31 ;
- }
- else /* agent on another bus */
- {
- DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
- BIT0 | BIT31 ;
- }
- GT_REG_WRITE(pci_configuration_address[host],DataForReg);
- if (pciDevNum == SELF) /* This board */
- {
- GT_REG_READ(pci_configuration_data[host], &data);
- return data;
- }
- else /* The PCI is working in LE Mode So it swap the Data. */
- {
- GT_REG_READ(pci_configuration_data[host], &data);
- return WORD_SWAP(data);
- }
+ functionNum = regOffset & 0x00000700;
+ pciDevNum = pciDevNum << 11;
+ regOffset = regOffset & 0xff;
+ busNum = busNum << 16;
+ if (pciDevNum == SELF) { /* This board */
+ DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
+ } else { /* agent on another bus */
+
+ DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
+ BIT0 | BIT31;
+ }
+ GT_REG_WRITE (pci_configuration_address[host], DataForReg);
+ if (pciDevNum == SELF) { /* This board */
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return data;
+ } else { /* The PCI is working in LE Mode So it swap the Data. */
+
+ GT_REG_READ (pci_configuration_data[host], &data);
+ return WORD_SWAP (data);
+ }
}
/********************************************************************
@@ -258,95 +270,117 @@
* OUTPUT: N/A
* RETURNS: PCI register base address
*********************************************************************/
-static unsigned int pciGetRegOffset(PCI_HOST host, PCI_REGION region)
+static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
{
- switch (host)
- {
+ switch (host) {
case PCI_HOST0:
- switch(region) {
- case PCI_IO: return PCI_0I_O_LOW_DECODE_ADDRESS;
- case PCI_REGION0: return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
- case PCI_REGION1: return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
- case PCI_REGION2: return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
- case PCI_REGION3: return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
- }
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
+ }
case PCI_HOST1:
- switch(region) {
- case PCI_IO: return PCI_1I_O_LOW_DECODE_ADDRESS;
- case PCI_REGION0: return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
- case PCI_REGION1: return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
- case PCI_REGION2: return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
- case PCI_REGION3: return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
- }
- }
- return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_LOW_DECODE_ADDRESS;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
+ }
+ }
+ return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
}
-static unsigned int pciGetRemapOffset(PCI_HOST host, PCI_REGION region)
+static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
{
- switch (host)
- {
+ switch (host) {
case PCI_HOST0:
- switch(region) {
- case PCI_IO: return PCI_0I_O_ADDRESS_REMAP;
- case PCI_REGION0: return PCI_0MEMORY0_ADDRESS_REMAP;
- case PCI_REGION1: return PCI_0MEMORY1_ADDRESS_REMAP;
- case PCI_REGION2: return PCI_0MEMORY2_ADDRESS_REMAP;
- case PCI_REGION3: return PCI_0MEMORY3_ADDRESS_REMAP;
- }
+ switch (region) {
+ case PCI_IO:
+ return PCI_0I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_0MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_0MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_0MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_0MEMORY3_ADDRESS_REMAP;
+ }
case PCI_HOST1:
- switch(region) {
- case PCI_IO: return PCI_1I_O_ADDRESS_REMAP;
- case PCI_REGION0: return PCI_1MEMORY0_ADDRESS_REMAP;
- case PCI_REGION1: return PCI_1MEMORY1_ADDRESS_REMAP;
- case PCI_REGION2: return PCI_1MEMORY2_ADDRESS_REMAP;
- case PCI_REGION3: return PCI_1MEMORY3_ADDRESS_REMAP;
- }
- }
- return PCI_0MEMORY0_ADDRESS_REMAP;
+ switch (region) {
+ case PCI_IO:
+ return PCI_1I_O_ADDRESS_REMAP;
+ case PCI_REGION0:
+ return PCI_1MEMORY0_ADDRESS_REMAP;
+ case PCI_REGION1:
+ return PCI_1MEMORY1_ADDRESS_REMAP;
+ case PCI_REGION2:
+ return PCI_1MEMORY2_ADDRESS_REMAP;
+ case PCI_REGION3:
+ return PCI_1MEMORY3_ADDRESS_REMAP;
+ }
+ }
+ return PCI_0MEMORY0_ADDRESS_REMAP;
}
-bool pciMapSpace(PCI_HOST host, PCI_REGION region, unsigned int remapBase, unsigned int bankBase,unsigned int bankLength)
+bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
+ unsigned int bankBase, unsigned int bankLength)
{
- unsigned int low=0xfff;
- unsigned int high=0x0;
- unsigned int regOffset=pciGetRegOffset(host, region);
- unsigned int remapOffset=pciGetRemapOffset(host, region);
+ unsigned int low = 0xfff;
+ unsigned int high = 0x0;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+ unsigned int remapOffset = pciGetRemapOffset (host, region);
- if(bankLength!=0) {
- low = (bankBase >> 20) & 0xfff;
- high=((bankBase+bankLength)>>20)-1;
- }
+ if (bankLength != 0) {
+ low = (bankBase >> 20) & 0xfff;
+ high = ((bankBase + bankLength) >> 20) - 1;
+ }
- GT_REG_WRITE(regOffset, low | (1<<24)); /* no swapping */
- GT_REG_WRITE(regOffset+8, high);
+ GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */
+ GT_REG_WRITE (regOffset + 8, high);
- if(bankLength!=0) { /* must do AFTER writing maps */
- GT_REG_WRITE(remapOffset, remapBase>>20); /* sorry, 32 bits only.
- dont support upper 32
- in this driver */
- }
- return true;
+ if (bankLength != 0) { /* must do AFTER writing maps */
+ GT_REG_WRITE (remapOffset, remapBase >> 20); /* sorry, 32 bits only.
+ dont support upper 32
+ in this driver */
+ }
+ return true;
}
-unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region)
+unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
{
- unsigned int low;
- unsigned int regOffset=pciGetRegOffset(host, region);
- GT_REG_READ(regOffset,&low);
- return (low&0xfff)<<20;
+ unsigned int low;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ return (low & 0xfff) << 20;
}
-unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region)
+unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
{
- unsigned int low,high;
- unsigned int regOffset=pciGetRegOffset(host, region);
- GT_REG_READ(regOffset,&low);
- GT_REG_READ(regOffset+8,&high);
- high&=0xfff;
- low&=0xfff;
- if(high<=low) return 0;
- return (high+1-low)<<20;
+ unsigned int low, high;
+ unsigned int regOffset = pciGetRegOffset (host, region);
+
+ GT_REG_READ (regOffset, &low);
+ GT_REG_READ (regOffset + 8, &high);
+ high &= 0xfff;
+ low &= 0xfff;
+ if (high <= low)
+ return 0;
+ return (high + 1 - low) << 20;
}
/********************************************************************
@@ -354,15 +388,19 @@
*
* Inputs: base and size of PCI SCS
*********************************************************************/
-void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank, unsigned int pciDramBase,unsigned int pciDramSize)
+void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
+ unsigned int pciDramBase, unsigned int pciDramSize)
{
pciDramBase = pciDramBase & 0xfffff000;
- pciDramBase = pciDramBase | (pciReadConfigReg(host,
- PCI_SCS_0_BASE_ADDRESS + 4*bank,SELF) & 0x00000fff);
- pciWriteConfigReg(host,PCI_SCS_0_BASE_ADDRESS + 4*bank,SELF,pciDramBase);
- if(pciDramSize == 0)
- pciDramSize ++;
- GT_REG_WRITE(pci_scs_bank_size[host][bank], pciDramSize-1);
+ pciDramBase = pciDramBase | (pciReadConfigReg (host,
+ PCI_SCS_0_BASE_ADDRESS
+ + 4 * bank,
+ SELF) & 0x00000fff);
+ pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + 4 * bank, SELF,
+ pciDramBase);
+ if (pciDramSize == 0)
+ pciDramSize++;
+ GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
}
@@ -377,31 +415,33 @@
* unsigned int topAddress - The region top Address.
* Returns: false if one of the parameters is erroneous true otherwise.
*********************************************************************/
-bool pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,unsigned int features,
- unsigned int baseAddress,unsigned int regionLength)
+bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
+ unsigned int features, unsigned int baseAddress,
+ unsigned int regionLength)
{
- unsigned int accessLow;
- unsigned int accessHigh;
- unsigned int accessTop = baseAddress + regionLength;
+ unsigned int accessLow;
+ unsigned int accessHigh;
+ unsigned int accessTop = baseAddress + regionLength;
- if(regionLength == 0) /* close the region. */
- {
- pciDisableAccessRegion(host, region);
- return true;
- }
- /* base Address is store is bits [11:0] */
- accessLow = (baseAddress & 0xfff00000) >> 20;
- /* All the features are update according to the defines in pci.h (to be on
- the safe side we disable bits: [11:0] */
- accessLow = accessLow | (features & 0xfffff000);
- /* write to the Low Access Region register */
- GT_REG_WRITE( pci_access_control_base_0_low[host] + 0x10*region,accessLow);
+ if (regionLength == 0) { /* close the region. */
+ pciDisableAccessRegion (host, region);
+ return true;
+ }
+ /* base Address is store is bits [11:0] */
+ accessLow = (baseAddress & 0xfff00000) >> 20;
+ /* All the features are update according to the defines in pci.h (to be on
+ the safe side we disable bits: [11:0] */
+ accessLow = accessLow | (features & 0xfffff000);
+ /* write to the Low Access Region register */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ accessLow);
- accessHigh = (accessTop & 0xfff00000) >> 20;
+ accessHigh = (accessTop & 0xfff00000) >> 20;
- /* write to the High Access Region register */
- GT_REG_WRITE(pci_access_control_top_0[host] + 0x10*region,accessHigh - 1);
- return true;
+ /* write to the High Access Region register */
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
+ accessHigh - 1);
+ return true;
}
/********************************************************************
@@ -411,11 +451,12 @@
* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
* Returns: N/A.
*********************************************************************/
-void pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region)
+void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
{
- /* writing back the registers default values. */
- GT_REG_WRITE(pci_access_control_base_0_low[host] + 0x10*region,0x01001fff);
- GT_REG_WRITE(pci_access_control_top_0[host] + 0x10*region,0);
+ /* writing back the registers default values. */
+ GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
+ 0x01001fff);
+ GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
}
/********************************************************************
@@ -424,13 +465,13 @@
* Inputs: N/A
* Returns: true.
*********************************************************************/
-bool pciArbiterEnable(PCI_HOST host)
+bool pciArbiterEnable (PCI_HOST host)
{
- unsigned int regData;
+ unsigned int regData;
- GT_REG_READ(pci_arbiter_control[host],®Data);
- GT_REG_WRITE(pci_arbiter_control[host],regData | BIT31);
- return true;
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
+ return true;
}
/********************************************************************
@@ -439,13 +480,13 @@
* Inputs: N/A
* Returns: true
*********************************************************************/
-bool pciArbiterDisable(PCI_HOST host)
+bool pciArbiterDisable (PCI_HOST host)
{
- unsigned int regData;
+ unsigned int regData;
- GT_REG_READ(pci_arbiter_control[host],®Data);
- GT_REG_WRITE(pci_arbiter_control[host],regData & 0x7fffffff);
- return true;
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
+ return true;
}
/********************************************************************
@@ -463,7 +504,7 @@
* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
* Returns: true
*********************************************************************/
-bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
+bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
PCI_AGENT_PARK externalAgent0,
PCI_AGENT_PARK externalAgent1,
PCI_AGENT_PARK externalAgent2,
@@ -471,17 +512,17 @@
PCI_AGENT_PARK externalAgent4,
PCI_AGENT_PARK externalAgent5)
{
- unsigned int regData;
- unsigned int writeData;
+ unsigned int regData;
+ unsigned int writeData;
- GT_REG_READ(pci_arbiter_control[host],®Data);
- writeData = (internalAgent << 14) + (externalAgent0 << 15) + \
- (externalAgent1 << 16) + (externalAgent2 << 17) + \
- (externalAgent3 << 18) + (externalAgent4 << 19) + \
+ GT_REG_READ (pci_arbiter_control[host], ®Data);
+ writeData = (internalAgent << 14) + (externalAgent0 << 15) +
+ (externalAgent1 << 16) + (externalAgent2 << 17) +
+ (externalAgent3 << 18) + (externalAgent4 << 19) +
(externalAgent5 << 20);
- regData = (regData & ~(0x7f<<14)) | writeData;
- GT_REG_WRITE(pci_arbiter_control[host],regData);
- return true;
+ regData = (regData & ~(0x7f << 14)) | writeData;
+ GT_REG_WRITE (pci_arbiter_control[host], regData);
+ return true;
}
/********************************************************************
@@ -497,65 +538,66 @@
* regionLength - Region length.
* Returns: false if one of the parameters is wrong otherwise return true.
*********************************************************************/
-bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,PCI_SNOOP_TYPE snoopType,
+bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
+ PCI_SNOOP_TYPE snoopType,
unsigned int baseAddress,
unsigned int regionLength)
{
- unsigned int snoopXbaseAddress;
- unsigned int snoopXtopAddress;
- unsigned int data;
- unsigned int snoopHigh = baseAddress + regionLength;
+ unsigned int snoopXbaseAddress;
+ unsigned int snoopXtopAddress;
+ unsigned int data;
+ unsigned int snoopHigh = baseAddress + regionLength;
- if( (region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB) )
- return false;
- snoopXbaseAddress = pci_snoop_control_base_0_low[host] + 0x10 * region;
- snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
- if(regionLength == 0) /* closing the region */
- {
- GT_REG_WRITE(snoopXbaseAddress,0x0000ffff);
- GT_REG_WRITE(snoopXtopAddress,0);
+ if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
+ return false;
+ snoopXbaseAddress =
+ pci_snoop_control_base_0_low[host] + 0x10 * region;
+ snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
+ if (regionLength == 0) { /* closing the region */
+ GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
+ GT_REG_WRITE (snoopXtopAddress, 0);
+ return true;
+ }
+ baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
+ data = (baseAddress >> 20) | snoopType << 12;
+ GT_REG_WRITE (snoopXbaseAddress, data);
+ snoopHigh = (snoopHigh & 0xfff00000) >> 20;
+ GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
return true;
- }
- baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
- data = (baseAddress >> 20) | snoopType << 12;
- GT_REG_WRITE(snoopXbaseAddress,data);
- snoopHigh = (snoopHigh & 0xfff00000) >> 20;
- GT_REG_WRITE(snoopXtopAddress,snoopHigh - 1);
- return true;
}
/*
*
*/
-static int gt_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev,
- int offset, u32* value)
+static int gt_read_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 * value)
{
- int bus = PCI_BUS(dev);
+ int bus = PCI_BUS (dev);
- if ((bus == local_buses[0]) || (bus == local_buses[1])){
- *value = pciReadConfigReg((PCI_HOST) hose->cfg_addr, offset,
- PCI_DEV(dev));
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev));
} else {
- *value = pciOverBridgeReadConfigReg((PCI_HOST) hose->cfg_addr,
- offset, PCI_DEV(dev), bus);
+ *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
+ cfg_addr, offset,
+ PCI_DEV (dev), bus);
}
return 0;
}
-static int gt_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev,
- int offset, u32 value)
+static int gt_write_config_dword (struct pci_controller *hose,
+ pci_dev_t dev, int offset, u32 value)
{
- int bus = PCI_BUS(dev);
+ int bus = PCI_BUS (dev);
- if ((bus == local_buses[0]) || (bus == local_buses[1])){
- pciWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
- PCI_DEV(dev), value);
+ if ((bus == local_buses[0]) || (bus == local_buses[1])) {
+ pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ PCI_DEV (dev), value);
} else {
- pciOverBridgeWriteConfigReg((PCI_HOST)hose->cfg_addr, offset,
- PCI_DEV(dev), value, bus);
+ pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset, PCI_DEV (dev), value,
+ bus);
}
return 0;
}
@@ -564,147 +606,145 @@
*
*/
-static void gt_setup_ide(struct pci_controller *hose,
- pci_dev_t dev, struct pci_config_table *entry)
+static void gt_setup_ide (struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
{
- static const int ide_bar[]={8,4,8,4,0,0};
- u32 bar_response, bar_value;
- int bar;
+ static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
+ u32 bar_response, bar_value;
+ int bar;
- for (bar=0; bar<6; bar++)
- {
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, 0x0);
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, &bar_response);
+ for (bar = 0; bar < 6; bar++) {
+ pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ 0x0);
+ pci_read_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ &bar_response);
- pciauto_region_allocate(bar_response & PCI_BASE_ADDRESS_SPACE_IO ?
- hose->pci_io : hose->pci_mem, ide_bar[bar], &bar_value);
+ pciauto_region_allocate (bar_response &
+ PCI_BASE_ADDRESS_SPACE_IO ? hose->
+ pci_io : hose->pci_mem, ide_bar[bar],
+ &bar_value);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar*4, bar_value);
- }
+ pci_write_config_dword (dev, PCI_BASE_ADDRESS_0 + bar * 4,
+ bar_value);
+ }
}
-static void gt_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
- unsigned char pin, irq;
+ unsigned char pin, irq;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
- if(pin == 1) { /* only allow INT A */
- irq = pci_irq_swizzle[(PCI_HOST)hose->cfg_addr][PCI_DEV(dev)];
- if(irq)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
- }
+ if (pin == 1) { /* only allow INT A */
+ irq = pci_irq_swizzle[(PCI_HOST) hose->
+ cfg_addr][PCI_DEV (dev)];
+ if (irq)
+ pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
+ }
}
struct pci_config_table gt_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
- { }
+ {}
};
struct pci_controller pci0_hose = {
- fixup_irq: gt_fixup_irq,
- config_table: gt_config_table,
+ fixup_irq:gt_fixup_irq,
+ config_table:gt_config_table,
};
struct pci_controller pci1_hose = {
- fixup_irq: gt_fixup_irq,
- config_table: gt_config_table,
+ fixup_irq:gt_fixup_irq,
+ config_table:gt_config_table,
};
-void
-pci_init_board(void)
+void pci_init_board (void)
{
- unsigned int command;
+ unsigned int command;
- pci0_hose.first_busno = 0;
- pci0_hose.last_busno = 0xff;
- local_buses[0] = pci0_hose.first_busno;
- /* PCI memory space */
- pci_set_region(pci0_hose.regions + 0,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_MEM_SIZE,
- PCI_REGION_MEM);
+ pci0_hose.first_busno = 0;
+ pci0_hose.last_busno = 0xff;
+ local_buses[0] = pci0_hose.first_busno;
+ /* PCI memory space */
+ pci_set_region (pci0_hose.regions + 0,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_0_MEM_SPACE,
+ CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
- /* PCI I/O space */
- pci_set_region(pci0_hose.regions + 1,
- CFG_PCI0_IO_SPACE_PCI,
- CFG_PCI0_IO_SPACE,
- CFG_PCI0_IO_SIZE,
- PCI_REGION_IO);
+ /* PCI I/O space */
+ pci_set_region (pci0_hose.regions + 1,
+ CFG_PCI0_IO_SPACE_PCI,
+ CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
- pci_set_ops(&pci0_hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- gt_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- gt_write_config_dword);
+ pci_set_ops (&pci0_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
- pci0_hose.region_count = 2;
+ pci0_hose.region_count = 2;
- pci0_hose.cfg_addr = (unsigned int*) PCI_HOST0;
+ pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
- pci_register_hose(&pci0_hose);
+ pci_register_hose (&pci0_hose);
- pciArbiterEnable(PCI_HOST0);
- pciParkingDisable(PCI_HOST0,1,1,1,1,1,1,1);
+ pciArbiterEnable (PCI_HOST0);
+ pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
- command = pciReadConfigReg(PCI_HOST0, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MASTER;
- pciWriteConfigReg(PCI_HOST0, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
- pci0_hose.last_busno = pci_hose_scan(&pci0_hose);
+ pci0_hose.last_busno = pci_hose_scan (&pci0_hose);
- command = pciReadConfigReg(PCI_HOST0, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MEMORY;
- pciWriteConfigReg(PCI_HOST0, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
- pci1_hose.first_busno = pci0_hose.last_busno + 1;
- pci1_hose.last_busno = 0xff;
- pci1_hose.current_busno = pci0_hose.current_busno;
- local_buses[1] = pci1_hose.first_busno;
+ pci1_hose.first_busno = pci0_hose.last_busno + 1;
+ pci1_hose.last_busno = 0xff;
+ pci1_hose.current_busno = pci0_hose.current_busno;
+ local_buses[1] = pci1_hose.first_busno;
- /* PCI memory space */
- pci_set_region(pci1_hose.regions + 0,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
+ /* PCI memory space */
+ pci_set_region (pci1_hose.regions + 0,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_0_MEM_SPACE,
+ CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
- /* PCI I/O space */
- pci_set_region(pci1_hose.regions + 1,
- CFG_PCI1_IO_SPACE_PCI,
- CFG_PCI1_IO_SPACE,
- CFG_PCI1_IO_SIZE,
- PCI_REGION_IO);
+ /* PCI I/O space */
+ pci_set_region (pci1_hose.regions + 1,
+ CFG_PCI1_IO_SPACE_PCI,
+ CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
- pci_set_ops(&pci1_hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- gt_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- gt_write_config_dword);
+ pci_set_ops (&pci1_hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ gt_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ gt_write_config_dword);
- pci1_hose.region_count = 2;
+ pci1_hose.region_count = 2;
- pci1_hose.cfg_addr = (unsigned int*) PCI_HOST1;
+ pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
- pci_register_hose(&pci1_hose);
+ pci_register_hose (&pci1_hose);
- pciArbiterEnable(PCI_HOST1);
- pciParkingDisable(PCI_HOST1,1,1,1,1,1,1,1);
+ pciArbiterEnable (PCI_HOST1);
+ pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
- command = pciReadConfigReg(PCI_HOST1, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MASTER;
- pciWriteConfigReg(PCI_HOST1, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MASTER;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
- pci1_hose.last_busno = pci_hose_scan(&pci1_hose);
+ pci1_hose.last_busno = pci_hose_scan (&pci1_hose);
- command = pciReadConfigReg(PCI_HOST1, PCI_COMMAND, SELF);
- command |= PCI_COMMAND_MEMORY;
- pciWriteConfigReg(PCI_HOST1, PCI_COMMAND, SELF, command);
+ command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
+ command |= PCI_COMMAND_MEMORY;
+ pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
}
diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c
index d019d22..d9318d5 100644
--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -54,65 +54,64 @@
uchar tras_clocks;
uchar burst_len;
uchar banks, slot;
- int size; /* detected size, not from I2C but from dram_size() */
+ int size; /* detected size, not from I2C but from dram_size() */
} sdram_info_t;
#ifdef DEBUG
-void dump_dimm_info(struct sdram_info *d)
+void dump_dimm_info (struct sdram_info *d)
{
- static const char *ecc_legend[]={""," Parity"," ECC"};
- printf("dimm%s %sDRAM: %dMibytes:\n",
- ecc_legend[d->ecc],
- d->registered?"R":"",
- (d->size>>20));
- printf(" drb=%d tpar=%d tras=%d burstlen=%d banks=%d slot=%d\n",
- d->drb_size, d->tpar, d->tras_clocks, d->burst_len,
- d->banks, d->slot);
+ static const char *ecc_legend[] = { "", " Parity", " ECC" };
+
+ printf ("dimm%s %sDRAM: %dMibytes:\n",
+ ecc_legend[d->ecc],
+ d->registered ? "R" : "", (d->size >> 20));
+ printf (" drb=%d tpar=%d tras=%d burstlen=%d banks=%d slot=%d\n",
+ d->drb_size, d->tpar, d->tras_clocks, d->burst_len,
+ d->banks, d->slot);
}
#endif
static int
-memory_map_bank(unsigned int bankNo,
- unsigned int bankBase,
- unsigned int bankLength)
+memory_map_bank (unsigned int bankNo,
+ unsigned int bankBase, unsigned int bankLength)
{
#ifdef DEBUG
if (bankLength > 0) {
- printf("mapping bank %d at %08x - %08x\n",
- bankNo, bankBase, bankBase + bankLength - 1);
+ printf ("mapping bank %d at %08x - %08x\n",
+ bankNo, bankBase, bankBase + bankLength - 1);
} else {
- printf("unmapping bank %d\n", bankNo);
+ printf ("unmapping bank %d\n", bankNo);
}
#endif
- memoryMapBank(bankNo, bankBase, bankLength);
+ memoryMapBank (bankNo, bankBase, bankLength);
return 0;
}
#ifdef MAP_PCI
static int
-memory_map_bank_pci(unsigned int bankNo,
- unsigned int bankBase,
- unsigned int bankLength)
+memory_map_bank_pci (unsigned int bankNo,
+ unsigned int bankBase, unsigned int bankLength)
{
PCI_HOST host;
- for (host=PCI_HOST0;host<=PCI_HOST1;host++) {
- const int features=
+
+ for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
+ const int features =
PREFETCH_ENABLE |
DELAYED_READ_ENABLE |
AGGRESSIVE_PREFETCH |
READ_LINE_AGGRESSIVE_PREFETCH |
READ_MULTI_AGGRESSIVE_PREFETCH |
- MAX_BURST_4 |
- PCI_NO_SWAP;
+ MAX_BURST_4 | PCI_NO_SWAP;
- pciMapMemoryBank(host, bankNo, bankBase, bankLength);
+ pciMapMemoryBank (host, bankNo, bankBase, bankLength);
- pciSetRegionSnoopMode(host, bankNo, PCI_SNOOP_WB, bankBase,
- bankLength);
+ pciSetRegionSnoopMode (host, bankNo, PCI_SNOOP_WB, bankBase,
+ bankLength);
- pciSetRegionFeatures(host, bankNo, features, bankBase, bankLength);
+ pciSetRegionFeatures (host, bankNo, features, bankBase,
+ bankLength);
}
return 0;
}
@@ -128,8 +127,7 @@
* translate ns.ns/10 coding of SPD timing values
* into 10 ps unit values
*/
-static inline unsigned short
-NS10to10PS(unsigned char spd_byte)
+static inline unsigned short NS10to10PS (unsigned char spd_byte)
{
unsigned short ns, ns10;
@@ -138,37 +136,35 @@
/* isolate lower nibble */
ns10 = (spd_byte & 0x0F);
- return(ns*100 + ns10*10);
+ return (ns * 100 + ns10 * 10);
}
/*
* translate ns coding of SPD timing values
* into 10 ps unit values
*/
-static inline unsigned short
-NSto10PS(unsigned char spd_byte)
+static inline unsigned short NSto10PS (unsigned char spd_byte)
{
- return(spd_byte*100);
+ return (spd_byte * 100);
}
#ifdef CONFIG_ZUMA_V2
-static int
-check_dimm(uchar slot, sdram_info_t *info)
+static int check_dimm (uchar slot, sdram_info_t * info)
{
/* assume 2 dimms, 2 banks each 256M - we dont have an
* dimm i2c so rely on the detection routines later */
- memset(info, 0, sizeof(*info));
+ memset (info, 0, sizeof (*info));
info->slot = slot;
info->banks = 2; /* Detect later */
- info->registered = 0;
+ info->registered = 0;
info->drb_size = 32; /* 16 - 256MBit, 32 - 512MBit
but doesn't matter, both do same
thing in setup_sdram() */
- info->tpar = 3;
- info->tras_clocks = 5;
- info->burst_len = 4;
+ info->tpar = 3;
+ info->tras_clocks = 5;
+ info->burst_len = 4;
#ifdef CONFIG_ECC
info->ecc = 0; /* Detect later */
#endif /* CONFIG_ECC */
@@ -177,10 +173,9 @@
#elif defined(CONFIG_P3G4)
-static int
-check_dimm(uchar slot, sdram_info_t *info)
+static int check_dimm (uchar slot, sdram_info_t * info)
{
- memset(info, 0, sizeof(*info));
+ memset (info, 0, sizeof (*info));
if (slot)
return 0;
@@ -198,12 +193,11 @@
return 0;
}
-#else /* ! CONFIG_ZUMA_V2 && ! CONFIG_P3G4*/
+#else /* ! CONFIG_ZUMA_V2 && ! CONFIG_P3G4 */
/* This code reads the SPD chip on the sdram and populates
* the array which is passed in with the relevant information */
-static int
-check_dimm(uchar slot, sdram_info_t *info)
+static int check_dimm (uchar slot, sdram_info_t * info)
{
DECLARE_GLOBAL_DATA_PTR;
uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
@@ -215,32 +209,32 @@
get_clocks ();
- tmemclk = 1000000000 / (gd->bus_clk / 100); /* in 10 ps units */
+ tmemclk = 1000000000 / (gd->bus_clk / 100); /* in 10 ps units */
#ifdef CONFIG_EVB64260_750CX
if (0 != slot) {
- printf("check_dimm: The EVB-64260-750CX only has 1 DIMM,");
- printf(" called with slot=%d insetad!\n", slot);
+ printf ("check_dimm: The EVB-64260-750CX only has 1 DIMM,");
+ printf (" called with slot=%d insetad!\n", slot);
return 0;
}
#endif
- DP(puts("before i2c read\n"));
+ DP (puts ("before i2c read\n"));
- ret = i2c_read(addr, 0, 128, data, 0);
+ ret = i2c_read (addr, 0, 128, data, 0);
- DP(puts("after i2c read\n"));
+ DP (puts ("after i2c read\n"));
/* zero all the values */
- memset(info, 0, sizeof(*info));
+ memset (info, 0, sizeof (*info));
if (ret) {
- DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret));
+ DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
return 0;
}
/* first, do some sanity checks */
if (data[2] != 0x4) {
- printf("Not SDRAM in slot %d\n", slot);
+ printf ("Not SDRAM in slot %d\n", slot);
return 0;
}
@@ -251,7 +245,8 @@
sdram_banks = data[17];
width = data[13] & 0x7f;
- DP(printf("sdram_banks: %d, banks: %d\n", sdram_banks, info->banks));
+ DP (printf
+ ("sdram_banks: %d, banks: %d\n", sdram_banks, info->banks));
/* check if the memory is registered */
if (data[21] & (BIT1 | BIT4))
@@ -266,31 +261,31 @@
supp_cal = (data[18] & 0x6) >> 1;
/* compute the relevant clock values */
- trp_clocks = (NSto10PS(data[27])+(tmemclk-1)) / tmemclk;
- trcd_clocks = (NSto10PS(data[29])+(tmemclk-1)) / tmemclk;
- info->tras_clocks = (NSto10PS(data[30])+(tmemclk-1)) / tmemclk;
+ trp_clocks = (NSto10PS (data[27]) + (tmemclk - 1)) / tmemclk;
+ trcd_clocks = (NSto10PS (data[29]) + (tmemclk - 1)) / tmemclk;
+ info->tras_clocks = (NSto10PS (data[30]) + (tmemclk - 1)) / tmemclk;
- DP(printf("trp = %d\ntrcd_clocks = %d\ntras_clocks = %d\n",
- trp_clocks, trcd_clocks, info->tras_clocks));
+ DP (printf ("trp = %d\ntrcd_clocks = %d\ntras_clocks = %d\n",
+ trp_clocks, trcd_clocks, info->tras_clocks));
/* try a CAS latency of 3 first... */
cal_val = 0;
if (supp_cal & 3) {
- if (NS10to10PS(data[9]) <= tmemclk)
+ if (NS10to10PS (data[9]) <= tmemclk)
cal_val = 3;
}
/* then 2... */
if (supp_cal & 2) {
- if (NS10to10PS(data[23]) <= tmemclk)
+ if (NS10to10PS (data[23]) <= tmemclk)
cal_val = 2;
}
- DP(printf("cal_val = %d\n", cal_val));
+ DP (printf ("cal_val = %d\n", cal_val));
/* bummer, did't work... */
if (cal_val == 0) {
- DP(printf("Couldn't find a good CAS latency\n"));
+ DP (printf ("Couldn't find a good CAS latency\n"));
return 0;
}
@@ -302,18 +297,19 @@
if (trcd_clocks > info->tpar)
info->tpar = trcd_clocks;
- DP(printf("tpar set to: %d\n", info->tpar));
+ DP (printf ("tpar set to: %d\n", info->tpar));
#ifdef CFG_BROKEN_CL2
- if (info->tpar == 2){
+ if (info->tpar == 2) {
info->tpar = 3;
- DP(printf("tpar fixed-up to: %d\n", info->tpar));
+ DP (printf ("tpar fixed-up to: %d\n", info->tpar));
}
#endif
/* compute the module DRB size */
- info->drb_size = (((1 << (rows + cols)) * sdram_banks) * width) / _16M;
+ info->drb_size =
+ (((1 << (rows + cols)) * sdram_banks) * width) / _16M;
- DP(printf("drb_size set to: %d\n", info->drb_size));
+ DP (printf ("drb_size set to: %d\n", info->drb_size));
/* find the burst len */
info->burst_len = data[16] & 0xf;
@@ -330,40 +326,52 @@
}
#endif /* ! CONFIG_ZUMA_V2 */
-static int
-setup_sdram_common(sdram_info_t info[2])
+static int setup_sdram_common (sdram_info_t info[2])
{
ulong tmp;
- int tpar=2, tras_clocks=5, registered=1, ecc=2;
+ int tpar = 2, tras_clocks = 5, registered = 1, ecc = 2;
- if(!info[0].banks && !info[1].banks) return 0;
+ if (!info[0].banks && !info[1].banks)
+ return 0;
+
+ if (info[0].banks) {
+ if (info[0].tpar > tpar)
+ tpar = info[0].tpar;
+ if (info[0].tras_clocks > tras_clocks)
+ tras_clocks = info[0].tras_clocks;
+ if (!info[0].registered)
+ registered = 0;
+ if (info[0].ecc != 2indent: Standard input:491: Warning:old style assignment ambiguity in "=*". Assuming "= *"
+
+indent: Standard input:492: Warning:old style assignment ambiguity in "=*". Assuming "= *"
- if(info[0].banks) {
- if(info[0].tpar>tpar) tpar=info[0].tpar;
- if(info[0].tras_clocks>tras_clocks) tras_clocks=info[0].tras_clocks;
- if(!info[0].registered) registered=0;
- if(info[0].ecc!=2) ecc=0;
+)
+ ecc = 0;
}
- if(info[1].banks) {
- if(info[1].tpar>tpar) tpar=info[1].tpar;
- if(info[1].tras_clocks>tras_clocks) tras_clocks=info[1].tras_clocks;
- if(!info[1].registered) registered=0;
- if(info[1].ecc!=2) ecc=0;
+ if (info[1].banks) {
+ if (info[1].tpar > tpar)
+ tpar = info[1].tpar;
+ if (info[1].tras_clocks > tras_clocks)
+ tras_clocks = info[1].tras_clocks;
+ if (!info[1].registered)
+ registered = 0;
+ if (info[1].ecc != 2)
+ ecc = 0;
}
/* SDRAM configuration */
- tmp = GTREGREAD(SDRAM_CONFIGURATION);
+ tmp = GTREGREAD (SDRAM_CONFIGURATION);
/* Turn on physical interleave if both DIMMs
* have even numbers of banks. */
- if( (info[0].banks == 0 || info[0].banks == 2) &&
- (info[1].banks == 0 || info[1].banks == 2) ) {
- /* physical interleave on */
- tmp &= ~(1 << 15);
+ if ((info[0].banks == 0 || info[0].banks == 2) &&
+ (info[1].banks == 0 || info[1].banks == 2)) {
+ /* physical interleave on */
+ tmp &= ~(1 << 15);
} else {
- /* physical interleave off */
- tmp |= (1 << 15);
+ /* physical interleave off */
+ tmp |= (1 << 15);
}
tmp |= (registered << 17);
@@ -372,52 +380,51 @@
* See Res #12 */
tmp |= (1 << 26);
- GT_REG_WRITE(SDRAM_CONFIGURATION, tmp);
- DP(printf("SDRAM config: %08x\n",
- GTREGREAD(SDRAM_CONFIGURATION)));
+ GT_REG_WRITE (SDRAM_CONFIGURATION, tmp);
+ DP (printf ("SDRAM config: %08x\n", GTREGREAD (SDRAM_CONFIGURATION)));
/* SDRAM timing */
tmp = (((tpar == 3) ? 2 : 1) |
(((tpar == 3) ? 2 : 1) << 2) |
- (((tpar == 3) ? 2 : 1) << 4) |
- (tras_clocks << 8));
+ (((tpar == 3) ? 2 : 1) << 4) | (tras_clocks << 8));
#ifdef CONFIG_ECC
/* Setup ECC */
- if (ecc == 2) tmp |= 1<<13;
+ if (ecc == 2)
+ tmp |= 1 << 13;
#endif /* CONFIG_ECC */
- GT_REG_WRITE(SDRAM_TIMING, tmp);
- DP(printf("SDRAM timing: %08x (%d,%d,%d,%d)\n",
- GTREGREAD(SDRAM_TIMING), tpar,tpar,tpar,tras_clocks));
+ GT_REG_WRITE (SDRAM_TIMING, tmp);
+ DP (printf ("SDRAM timing: %08x (%d,%d,%d,%d)\n",
+ GTREGREAD (SDRAM_TIMING), tpar, tpar, tpar, tras_clocks));
/* SDRAM address decode register */
/* program this with the default value */
- GT_REG_WRITE(SDRAM_ADDRESS_DECODE, 0x2);
- DP(printf("SDRAM decode: %08x\n",
- GTREGREAD(SDRAM_ADDRESS_DECODE)));
+ GT_REG_WRITE (SDRAM_ADDRESS_DECODE, 0x2);
+ DP (printf ("SDRAM decode: %08x\n",
+ GTREGREAD (SDRAM_ADDRESS_DECODE)));
return 0;
}
/* sets up the GT properly with information passed in */
-static int
-setup_sdram(sdram_info_t *info)
+static int setup_sdram (sdram_info_t * info)
{
ulong tmp, check;
ulong *addr = 0;
int i;
/* sanity checking */
- if (! info->banks) return 0;
+ if (!info->banks)
+ return 0;
/* ---------------------------- */
/* Program the GT with the discovered data */
/* bank parameters */
- tmp = (0xf<<16); /* leave all virt bank pages open */
+ tmp = (0xf << 16); /* leave all virt bank pages open */
- DP(printf("drb_size: %d\n", info->drb_size));
+ DP (printf ("drb_size: %d\n", info->drb_size));
switch (info->drb_size) {
case 1:
tmp |= (1 << 14);
@@ -431,41 +438,42 @@
tmp |= (3 << 14);
break;
default:
- printf("Error in dram size calculation\n");
+ printf ("Error in dram size calculation\n");
return 1;
}
/* SDRAM bank parameters */
/* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
- GT_REG_WRITE(SDRAM_BANK0PARAMETERS + (info->slot * 0x8), tmp);
- GT_REG_WRITE(SDRAM_BANK1PARAMETERS + (info->slot * 0x8), tmp);
- DP(printf("SDRAM bankparam slot %d (bank %d+%d): %08lx\n", info->slot, info->slot*2, (info->slot*2)+1, tmp));
+ GT_REG_WRITE (SDRAM_BANK0PARAMETERS + (info->slot * 0x8), tmp);
+ GT_REG_WRITE (SDRAM_BANK1PARAMETERS + (info->slot * 0x8), tmp);
+ DP (printf
+ ("SDRAM bankparam slot %d (bank %d+%d): %08lx\n", info->slot,
+ info->slot * 2, (info->slot * 2) + 1, tmp));
/* set the SDRAM configuration for each bank */
for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) {
- DP(printf("*** Running a MRS cycle for bank %d ***\n", i));
+ DP (printf ("*** Running a MRS cycle for bank %d ***\n", i));
/* map the bank */
- memory_map_bank(i, 0, GB/4);
+ memory_map_bank (i, 0, GB / 4);
/* set SDRAM mode */
- GT_REG_WRITE(SDRAM_OPERATION_MODE, 0x3);
- check = GTREGREAD(SDRAM_OPERATION_MODE);
+ GT_REG_WRITE (SDRAM_OPERATION_MODE, 0x3);
+ check = GTREGREAD (SDRAM_OPERATION_MODE);
/* dummy write */
*addr = 0;
/* wait for the command to complete */
- while ((GTREGREAD(SDRAM_OPERATION_MODE) & (1 << 31)) == 0)
- ;
+ while ((GTREGREAD (SDRAM_OPERATION_MODE) & (1 << 31)) == 0);
/* switch back to normal operation mode */
- GT_REG_WRITE(SDRAM_OPERATION_MODE, 0);
- check = GTREGREAD(SDRAM_OPERATION_MODE);
+ GT_REG_WRITE (SDRAM_OPERATION_MODE, 0);
+ check = GTREGREAD (SDRAM_OPERATION_MODE);
/* unmap the bank */
- memory_map_bank(i, 0, 0);
- DP(printf("*** MRS cycle for bank %d done ***\n", i));
+ memory_map_bank (i, 0, 0);
+ DP (printf ("*** MRS cycle for bank %d done ***\n", i));
}
return 0;
@@ -478,50 +486,50 @@
* - short between address lines
* - short between data lines
*/
-static long int
-dram_size(long int *base, long int maxsize)
+static long int dram_size (long int *base, long int maxsize)
{
- volatile long int *addr, *b=base;
- long int cnt, val, save1, save2;
+ volatile long int *addr, *b = base;
+ long int cnt, val, save1, save2;
#define STARTVAL (1<<20) /* start test at 1M */
- for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
+ for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
+ cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
- save1=*addr; /* save contents of addr */
- save2=*b; /* save contents of base */
+ save1 = *addr; /* save contents of addr */
+ save2 = *b; /* save contents of base */
- *addr=cnt; /* write cnt to addr */
- *b=0; /* put null at base */
+ *addr = cnt; /* write cnt to addr */
+ *b = 0; /* put null at base */
- /* check at base address */
- if ((*b) != 0) {
- *addr=save1; /* restore *addr */
- *b=save2; /* restore *b */
- return (0);
- }
- val = *addr; /* read *addr */
+ /* check at base address */
+ if ((*b) != 0) {
+ *addr = save1; /* restore *addr */
+ *b = save2; /* restore *b */
+ return (0);
+ }
+ val = *addr; /* read *addr */
- *addr=save1;
- *b=save2;
+ *addr = save1;
+ *b = save2;
- if (val != cnt) {
- /* fix boundary condition.. STARTVAL means zero */
- if(cnt==STARTVAL/sizeof(long)) cnt=0;
- return (cnt * sizeof(long));
- }
- }
- return maxsize;
+ if (val != cnt) {
+ /* fix boundary condition.. STARTVAL means zero */
+ if (cnt == STARTVAL / sizeof (long))
+ cnt = 0;
+ return (cnt * sizeof (long));
+ }
+ }
+ return maxsize;
}
/* ------------------------------------------------------------------------- */
/* U-Boot interface function to SDRAM init - this is where all the
* controlling logic happens */
-long int
-initdram(int board_type)
+long int initdram (int board_type)
{
- ulong checkbank[4] = { [0 ... 3] = 0 };
+ ulong checkbank[4] = {[0 ... 3] = 0 };
int bank_no;
ulong total;
int nhr;
@@ -531,92 +539,97 @@
/* first, use the SPD to get info about the SDRAM */
/* check the NHR bit and skip mem init if it's already done */
- nhr = get_hid0() & (1 << 16);
+ nhr = get_hid0 () & (1 << 16);
if (nhr) {
- printf("Skipping SDRAM setup due to NHR bit being set\n");
+ printf ("Skipping SDRAM setup due to NHR bit being set\n");
} else {
/* DIMM0 */
- check_dimm(0, &dimm_info[0]);
+ check_dimm (0, &dimm_info[0]);
/* DIMM1 */
-#ifndef CONFIG_EVB64260_750CX /* EVB64260_750CX has only 1 DIMM */
- check_dimm(1, &dimm_info[1]);
-#else /* CONFIG_EVB64260_750CX */
- memset(&dimm_info[1], 0, sizeof(sdram_info_t));
+#ifndef CONFIG_EVB64260_750CX /* EVB64260_750CX has only 1 DIMM */
+ check_dimm (1, &dimm_info[1]);
+#else /* CONFIG_EVB64260_750CX */
+ memset (&dimm_info[1], 0, sizeof (sdram_info_t));
#endif
/* unmap all banks */
- memory_map_bank(0, 0, 0);
- memory_map_bank(1, 0, 0);
- memory_map_bank(2, 0, 0);
- memory_map_bank(3, 0, 0);
+ memory_map_bank (0, 0, 0);
+ memory_map_bank (1, 0, 0);
+ memory_map_bank (2, 0, 0);
+ memory_map_bank (3, 0, 0);
/* Now, program the GT with the correct values */
- if (setup_sdram_common(dimm_info)) {
- printf("Setup common failed.\n");
+ if (setup_sdram_common (dimm_info)) {
+ printf ("Setup common failed.\n");
}
- if (setup_sdram(&dimm_info[0])) {
- printf("Setup for DIMM1 failed.\n");
+ if (setup_sdram (&dimm_info[0])) {
+ printf ("Setup for DIMM1 failed.\n");
}
- if (setup_sdram(&dimm_info[1])) {
- printf("Setup for DIMM2 failed.\n");
+ if (setup_sdram (&dimm_info[1])) {
+ printf ("Setup for DIMM2 failed.\n");
}
/* set the NHR bit */
- set_hid0(get_hid0() | (1 << 16));
+ set_hid0 (get_hid0 () | (1 << 16));
}
/* next, size the SDRAM banks */
total = 0;
- if (dimm_info[0].banks > 0) checkbank[0] = 1;
- if (dimm_info[0].banks > 1) checkbank[1] = 1;
+ if (dimm_info[0].banks > 0)
+ checkbank[0] = 1;
+ if (dimm_info[0].banks > 1)
+ checkbank[1] = 1;
if (dimm_info[0].banks > 2)
- printf("Error, SPD claims DIMM1 has >2 banks\n");
+ printf ("Error, SPD claims DIMM1 has >2 banks\n");
- if (dimm_info[1].banks > 0) checkbank[2] = 1;
- if (dimm_info[1].banks > 1) checkbank[3] = 1;
+ if (dimm_info[1].banks > 0)
+ checkbank[2] = 1;
+ if (dimm_info[1].banks > 1)
+ checkbank[3] = 1;
if (dimm_info[1].banks > 2)
- printf("Error, SPD claims DIMM2 has >2 banks\n");
+ printf ("Error, SPD claims DIMM2 has >2 banks\n");
/* Generic dram sizer: works even if we don't have i2c DIMMs,
* as long as the timing settings are more or less correct */
/*
* pass 1: size all the banks, using first bat (0-256M)
- * limitation: we only support 256M per bank due to
- * us only having 1 BAT for all DRAM
+ * limitation: we only support 256M per bank due to
+ * us only having 1 BAT for all DRAM
*/
for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
/* skip over banks that are not populated */
- if (! checkbank[bank_no])
+ if (!checkbank[bank_no])
continue;
- DP(printf("checking bank %d\n", bank_no));
+ DP (printf ("checking bank %d\n", bank_no));
- memory_map_bank(bank_no, 0, GB/4);
- checkbank[bank_no] = dram_size(NULL, GB/4);
- memory_map_bank(bank_no, 0, 0);
+ memory_map_bank (bank_no, 0, GB / 4);
+ checkbank[bank_no] = dram_size (NULL, GB / 4);
+ memory_map_bank (bank_no, 0, 0);
- DP(printf("bank %d %08lx\n", bank_no, checkbank[bank_no]));
+ DP (printf ("bank %d %08lx\n", bank_no, checkbank[bank_no]));
}
/*
* pass 2: contiguously map each bank into physical address
- * space.
+ * space.
*/
- dimm_info[0].banks=dimm_info[1].banks=0;
+ dimm_info[0].banks = dimm_info[1].banks = 0;
for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
- if(!checkbank[bank_no]) continue;
+ if (!checkbank[bank_no])
+ continue;
- dimm_info[bank_no/2].banks++;
- dimm_info[bank_no/2].size+=checkbank[bank_no];
+ dimm_info[bank_no / 2].banks++;
+ dimm_info[bank_no / 2].size += checkbank[bank_no];
- memory_map_bank(bank_no, total, checkbank[bank_no]);
+ memory_map_bank (bank_no, total, checkbank[bank_no]);
#ifdef MAP_PCI
- memory_map_bank_pci(bank_no, total, checkbank[bank_no]);
+ memory_map_bank_pci (bank_no, total, checkbank[bank_no]);
#endif
total += checkbank[bank_no];
}
@@ -630,21 +643,22 @@
* in that configuration, ECC chips are mounted, even for stacked
* chips)
*/
- if (checkbank[2]==0 && checkbank[3]==0) {
- dimm_info[0].ecc=2;
- GT_REG_WRITE(SDRAM_TIMING, GTREGREAD(SDRAM_TIMING) | (1 << 13));
+ if (checkbank[2] == 0 && checkbank[3] == 0) {
+ dimm_info[0].ecc = 2;
+ GT_REG_WRITE (SDRAM_TIMING,
+ GTREGREAD (SDRAM_TIMING) | (1 << 13));
/* TODO: do we have to run MRS cycles again? */
}
#endif /* CONFIG_ZUMA_V2 */
- if (GTREGREAD(SDRAM_TIMING) & (1 << 13)) {
- puts("[ECC] ");
+ if (GTREGREAD (SDRAM_TIMING) & (1 << 13)) {
+ puts ("[ECC] ");
}
#endif /* CONFIG_ECC */
#ifdef DEBUG
- dump_dimm_info(&dimm_info[0]);
- dump_dimm_info(&dimm_info[1]);
+ dump_dimm_info (&dimm_info[0]);
+ dump_dimm_info (&dimm_info[1]);
#endif
/* TODO: return at MOST 256M? */
/* return total > GB/4 ? GB/4 : total; */
diff --git a/board/evb64260/zuma_pbb_mbox.h b/board/evb64260/zuma_pbb_mbox.h
index 0e80fcb..b4a4c0c 100644
--- a/board/evb64260/zuma_pbb_mbox.h
+++ b/board/evb64260/zuma_pbb_mbox.h
@@ -2,33 +2,33 @@
#define OUT_PENDING 2
enum {
- ZUMA_MBOXMSG_DONE,
- ZUMA_MBOXMSG_MACL,
- ZUMA_MBOXMSG_MACH,
- ZUMA_MBOXMSG_IP,
- ZUMA_MBOXMSG_SLOT,
- ZUMA_MBOXMSG_RESET,
- ZUMA_MBOXMSG_BAUD,
- ZUMA_MBOXMSG_START,
- ZUMA_MBOXMSG_ENG_PRV_MACL,
- ZUMA_MBOXMSG_ENG_PRV_MACH,
+ ZUMA_MBOXMSG_DONE,
+ ZUMA_MBOXMSG_MACL,
+ ZUMA_MBOXMSG_MACH,
+ ZUMA_MBOXMSG_IP,
+ ZUMA_MBOXMSG_SLOT,
+ ZUMA_MBOXMSG_RESET,
+ ZUMA_MBOXMSG_BAUD,
+ ZUMA_MBOXMSG_START,
+ ZUMA_MBOXMSG_ENG_PRV_MACL,
+ ZUMA_MBOXMSG_ENG_PRV_MACH,
- MBOXMSG_LAST
+ MBOXMSG_LAST
};
struct zuma_mailbox_info {
- unsigned char acc_mac[6];
- unsigned char prv_mac[6];
- unsigned int ip;
- unsigned int slot_bac;
- unsigned int console_baud;
- unsigned int debug_baud;
+ unsigned char acc_mac[6];
+ unsigned char prv_mac[6];
+ unsigned int ip;
+ unsigned int slot_bac;
+ unsigned int console_baud;
+ unsigned int debug_baud;
};
struct _zuma_mbox_dev {
- pci_dev_t dev;
- PBB_DMA_REG_MAP *sip;
- struct zuma_mailbox_info mailbox;
+ pci_dev_t dev;
+ PBB_DMA_REG_MAP *sip;
+ struct zuma_mailbox_info mailbox;
};
#define zuma_prv_mac zuma_mbox_dev.mailbox.prv_mac
@@ -40,4 +40,4 @@
extern struct _zuma_mbox_dev zuma_mbox_dev;
-extern int zuma_mbox_init(void);
+extern int zuma_mbox_init (void);
diff --git a/board/fads/flash.c b/board/fads/flash.c
index 680a2dc..c23dff7 100644
--- a/board/fads/flash.c
+++ b/board/fads/flash.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CFG_ENV_IS_IN_FLASH)
# ifndef CFG_ENV_ADDR
@@ -41,43 +41,42 @@
/*-----------------------------------------------------------------------
* Functions
*/
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long total_size;
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
- for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
- {
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
total_size = 0;
size_b0 = 0xffffffff;
- for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
- {
- size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size), &flash_info[i]);
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ size_b1 =
+ flash_get_size ((vu_long *) (CFG_FLASH_BASE +
+ total_size),
+ &flash_info[i]);
- if (flash_info[i].flash_id == FLASH_UNKNOWN)
- {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", i, size_b1, size_b1>>20);
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", i, size_b1, size_b1 >> 20);
}
/* Is this really needed ? - LP */
if (size_b1 > size_b0) {
- printf ("## ERROR: Bank %d (0x%08lx = %ld MB) > Bank %d (0x%08lx = %ld MB)\n",
- i, size_b1, size_b1>>20, i-1, size_b0, size_b0>>20);
+ printf ("## ERROR: Bank %d (0x%08lx = %ld MB) > Bank %d (0x%08lx = %ld MB)\n", i, size_b1, size_b1 >> 20, i - 1, size_b0, size_b0 >> 20);
goto out_error;
}
size_b0 = size_b1;
@@ -85,43 +84,47 @@
}
/* Compute the Address Mask */
- for (i=0; (total_size >> i) != 0; ++i) {};
+ for (i = 0; (total_size >> i) != 0; ++i) {
+ }
i--;
if (total_size != (1 << i)) {
- printf ("## WARNING: Total FLASH size (0x%08lx = %ld MB) is not a power of 2\n",
- total_size, total_size>>20);
+ printf ("## WARNING: Total FLASH size (0x%08lx = %ld MB) is not a power of 2\n", total_size, total_size >> 20);
}
/* Remap FLASH according to real size */
- memctl->memc_or0 = ((((unsigned long)~1) << i) & OR_AM_MSK) | CFG_OR_TIMING_FLASH;
+ memctl->memc_or0 =
+ ((((unsigned long) ~1) << i) & OR_AM_MSK) |
+ CFG_OR_TIMING_FLASH;
memctl->memc_br0 = CFG_BR0_PRELIM;
total_size = 0;
- for (i=0; i < CFG_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i)
- {
+ for (i = 0; i < CFG_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) {
/* Re-do sizing to get full correct info */
/* Why ? - LP */
- size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size), &flash_info[i]);
+ size_b1 =
+ flash_get_size ((vu_long *) (CFG_FLASH_BASE +
+ total_size),
+ &flash_info[i]);
/* This is done by flash_get_size - LP */
/* flash_get_offsets (CFG_FLASH_BASE + total_size, &flash_info[i]); */
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[i]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[i]);
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- &flash_info[i]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[i]);
#endif
total_size += size_b1;
@@ -129,12 +132,11 @@
return (total_size);
-out_error:
- for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
+ out_error:
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
}
return (0);
@@ -142,13 +144,14 @@
/*-----------------------------------------------------------------------
*/
-static void flash_get_offsets (ulong base, flash_info_t *info)
+static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
/* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 || (info->flash_id & FLASH_TYPEMASK) == FLASH_AM080 ) {
- /* set sector offsets for uniform sector type */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040
+ || (info->flash_id & FLASH_TYPEMASK) == FLASH_AM080) {
+ /* set sector offsets for uniform sector type */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00040000);
}
@@ -157,64 +160,78 @@
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
int i;
- if (info->flash_id == FLASH_UNKNOWN)
- {
+ if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- default: printf ("Unknown Vendor "); break;
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf ("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf ("FUJITSU ");
+ break;
+ case FLASH_MAN_BM:
+ printf ("BRIGHT MICRO ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM080: printf ("29F080 or 29LV080 (8 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM080:
+ printf ("29F080 or 29LV080 (8 Mbit, uniform sectors)\n");
+ break;
+ case FLASH_AM400B:
+ printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B:
+ printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
}
- printf (" Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
+ printf (" Size: %ld MB in %d Sectors\n", info->size >> 20,
+ info->sector_count);
printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i)
- {
- if ((i % 5) == 0)
- {
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0) {
printf ("\n ");
}
printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ info->start[i], info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
@@ -232,11 +249,12 @@
* The following code cannot be run from FLASH!
*/
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+static ulong flash_get_size (vu_long * addr, flash_info_t * info)
{
short i;
+
#if 0
- ulong base = (ulong)addr;
+ ulong base = (ulong) addr;
#endif
uchar value;
@@ -253,97 +271,95 @@
value = addr[0];
- switch (value + (value << 16))
- {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
+ switch (value + (value << 16)) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
}
- value = addr[1]; /* device ID */
+ value = addr[1]; /* device ID */
- switch (value)
- {
- case AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ switch (value) {
+ case AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case AMD_ID_F080B:
- info->flash_id += FLASH_AM080;
- info->sector_count =16;
- info->size = 0x00400000;
- break; /* => 4 MB */
+ case AMD_ID_F080B:
+ info->flash_id += FLASH_AM080;
+ info->sector_count = 16;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ case AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ case AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ case AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ case AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
+ case AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
+ case AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
}
#if 0
/* set up sector start address table */
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00008000;
info->start[2] = base + 0x0000C000;
@@ -352,7 +368,7 @@
info->start[i] = base + (i * 0x00020000) - 0x00060000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00008000;
info->start[i--] = base + info->size - 0x0000C000;
@@ -362,24 +378,22 @@
}
}
#else
- flash_get_offsets ((ulong)addr, info);
+ flash_get_offsets ((ulong) addr, info);
#endif
/* check for protected sectors */
- for (i = 0; i < info->sector_count; i++)
- {
+ for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
+ addr = (volatile unsigned long *) (info->start[i]);
info->protect[i] = addr[2] & 1;
}
/*
* Prevent writes to uninitialized FLASH.
*/
- if (info->flash_id != FLASH_UNKNOWN)
- {
- addr = (volatile unsigned long *)info->start[0];
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *) info->start[0];
#if 0
*addr = 0x00F000F0; /* reset bank */
#else
@@ -394,9 +408,9 @@
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- vu_long *addr = (vu_long*)(info->start[0]);
+ vu_long *addr = (vu_long *) (info->start[0]);
int flag, prot, sect, l_sect;
ulong start, now, last;
@@ -416,15 +430,14 @@
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
@@ -432,7 +445,7 @@
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
#if 0
addr[0x0555] = 0x00AA00AA;
@@ -449,9 +462,9 @@
#endif
/* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
+ for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
+ addr = (vu_long *) (info->start[sect]);
#if 0
addr[0] = 0x00300030;
#else
@@ -463,7 +476,7 @@
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
@@ -475,15 +488,15 @@
goto DONE;
start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
+ last = start;
+ addr = (vu_long *) (info->start[l_sect]);
#if 0
while ((addr[0] & 0x00800080) != 0x00800080)
#else
while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
#endif
{
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -494,9 +507,9 @@
}
}
-DONE:
+ DONE:
/* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
+ addr = (volatile unsigned long *) info->start[0];
#if 0
addr[0] = 0x00F000F0; /* reset bank */
#else
@@ -514,7 +527,7 @@
* 2 - Flash not erased
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
@@ -526,19 +539,19 @@
*/
if ((l = addr - wp) != 0) {
data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- for (; i<4 && cnt>0; ++i) {
+ for (; i < 4 && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
wp += 4;
@@ -549,13 +562,13 @@
*/
while (cnt >= 4) {
data = 0;
- for (i=0; i<4; ++i) {
+ for (i = 0; i < 4; ++i) {
data = (data << 8) | *src++;
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
- wp += 4;
+ wp += 4;
cnt -= 4;
}
@@ -567,15 +580,15 @@
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- return (write_word(info, wp, data));
+ return (write_word (info, wp, data));
}
/*-----------------------------------------------------------------------
@@ -584,18 +597,18 @@
* 1 - write timeout
* 2 - Flash not erased
*/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+static int write_word (flash_info_t * info, ulong dest, ulong data)
{
- vu_long *addr = (vu_long*)(info->start[0]);
+ vu_long *addr = (vu_long *) (info->start[0]);
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
+ if ((*((vu_long *) dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
#if 0
addr[0x0555] = 0x00AA00AA;
@@ -607,21 +620,21 @@
addr[0x0555] = 0xA0A0A0A0;
#endif
- *((vu_long *)dest) = data;
+ *((vu_long *) dest) = data;
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* data polling for D7 */
start = get_timer (0);
#if 0
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
+ while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080))
#else
- while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
+ while ((*((vu_long *) dest) & 0x80808080) != (data & 0x80808080))
#endif
{
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 2c4fbf1..37788d5 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -72,30 +72,27 @@
};
Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
- { Xilinx_Virtex2,
- slave_selectmap,
- XILINX_XC2V3000_SIZE,
- (void *)&fpga_fns,
- 0
- }
+ {Xilinx_Virtex2,
+ slave_selectmap,
+ XILINX_XC2V3000_SIZE,
+ (void *) &fpga_fns,
+ 0}
};
/*
* Display FPGA revision information
*/
-void
-print_fpga_revision(void)
+void print_fpga_revision (void)
{
- vu_long *rev_p = (vu_long *)0x60000008;
+ vu_long *rev_p = (vu_long *) 0x60000008;
- printf("FPGA Revision 0x%.8lx"
- " (Date %.2lx/%.2lx/%.2lx, Status \"%.1lx\", Version %.3lu)\n",
- *rev_p,
- ((*rev_p >> 28) & 0xf),
- ((*rev_p >> 20) & 0xff),
- ((*rev_p >> 12) & 0xff),
- ((*rev_p >> 8) & 0xf),
- (*rev_p & 0xff));
+ printf ("FPGA Revision 0x%.8lx"
+ " (Date %.2lx/%.2lx/%.2lx, Status \"%.1lx\", Version %.3lu)\n",
+ *rev_p,
+ ((*rev_p >> 28) & 0xf),
+ ((*rev_p >> 20) & 0xff),
+ ((*rev_p >> 12) & 0xff),
+ ((*rev_p >> 8) & 0xf), (*rev_p & 0xff));
}
@@ -106,10 +103,9 @@
* problems with bus charging.
* Return 0 on failure, 1 on success.
*/
-int
-test_fpga_ibtr(void)
+int test_fpga_ibtr (void)
{
- vu_long *ibtr_p = (vu_long *)0x60000010;
+ vu_long *ibtr_p = (vu_long *) 0x60000010;
vu_long readback;
vu_long compare;
int i;
@@ -118,40 +114,41 @@
int pass = 1;
static const ulong bitpattern[] = {
- 0xdeadbeef, /* magic ID pattern for debug */
- 0x00000001, /* single bit */
- 0x00000003, /* two adjacent bits */
- 0x00000007, /* three adjacent bits */
- 0x0000000F, /* four adjacent bits */
- 0x00000005, /* two non-adjacent bits */
- 0x00000015, /* three non-adjacent bits */
- 0x00000055, /* four non-adjacent bits */
- 0xaaaaaaaa, /* alternating 1/0 */
+ 0xdeadbeef, /* magic ID pattern for debug */
+ 0x00000001, /* single bit */
+ 0x00000003, /* two adjacent bits */
+ 0x00000007, /* three adjacent bits */
+ 0x0000000F, /* four adjacent bits */
+ 0x00000005, /* two non-adjacent bits */
+ 0x00000015, /* three non-adjacent bits */
+ 0x00000055, /* four non-adjacent bits */
+ 0xaaaaaaaa, /* alternating 1/0 */
};
for (i = 0; i < 1024; i++) {
for (j = 0; j < 31; j++) {
- for (k = 0; k < sizeof(bitpattern)/sizeof(bitpattern[0]); k++) {
+ for (k = 0;
+ k < sizeof (bitpattern) / sizeof (bitpattern[0]);
+ k++) {
*ibtr_p = compare = (bitpattern[k] << j);
readback = *ibtr_p;
if (readback != ~compare) {
- printf("%s:%d: FPGA test fail: expected 0x%.8lx"
- " actual 0x%.8lx\n",
- __FUNCTION__, __LINE__, ~compare, readback);
+ printf ("%s:%d: FPGA test fail: expected 0x%.8lx" " actual 0x%.8lx\n", __FUNCTION__, __LINE__, ~compare, readback);
pass = 0;
break;
}
}
- if (!pass) break;
+ if (!pass)
+ break;
}
- if (!pass) break;
+ if (!pass)
+ break;
}
if (pass) {
- printf("FPGA inverting bus test passed\n");
- print_fpga_revision();
- }
- else {
- printf("** FPGA inverting bus test failed\n");
+ printf ("FPGA inverting bus test passed\n");
+ print_fpga_revision ();
+ } else {
+ printf ("** FPGA inverting bus test failed\n");
}
return pass;
}
@@ -160,19 +157,17 @@
/*
* Set the active-low FPGA reset signal.
*/
-void
-fpga_reset(int assert)
+void fpga_reset (int assert)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
- PRINTF("%s:%d: RESET ", __FUNCTION__, __LINE__);
+ PRINTF ("%s:%d: RESET ", __FUNCTION__, __LINE__);
if (assert) {
immap->im_ioport.iop_pcdat &= ~(0x8000 >> FPGA_RESET_BIT_NUM);
- PRINTF("asserted\n");
- }
- else {
+ PRINTF ("asserted\n");
+ } else {
immap->im_ioport.iop_pcdat |= (0x8000 >> FPGA_RESET_BIT_NUM);
- PRINTF("deasserted\n");
+ PRINTF ("deasserted\n");
}
}
@@ -181,54 +176,52 @@
* Initialize the SelectMap interface. We assume that the mode and the
* initial state of all of the port pins have already been set!
*/
-void
-fpga_selectmap_init(void)
+void fpga_selectmap_init (void)
{
- PRINTF("%s:%d: Initialize SelectMap interface\n", __FUNCTION__, __LINE__);
- fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */
+ PRINTF ("%s:%d: Initialize SelectMap interface\n", __FUNCTION__,
+ __LINE__);
+ fpga_pgm_fn (FALSE, FALSE, 0); /* make sure program pin is inactive */
}
/*
* Initialize the fpga. Return 1 on success, 0 on failure.
*/
-int
-gen860t_init_fpga(void)
+int gen860t_init_fpga (void)
{
DECLARE_GLOBAL_DATA_PTR;
int i;
- PRINTF("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n",
- __FUNCTION__, __LINE__, gd->reloc_off);
- fpga_init(gd->reloc_off);
- fpga_selectmap_init();
+ PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
+ fpga_init (gd->reloc_off);
+ fpga_selectmap_init ();
- for(i=0; i < CONFIG_FPGA_COUNT; i++) {
- PRINTF("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
- fpga_add(fpga_xilinx, &fpga[i]);
+ for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
+ fpga_add (fpga_xilinx, &fpga[i]);
}
- return 1;
+ return 1;
}
/*
* Set the FPGA's active-low SelectMap program line to the specified level
*/
-int
-fpga_pgm_fn(int assert, int flush, int cookie)
+int fpga_pgm_fn (int assert, int flush, int cookie)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
- PRINTF("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
+ PRINTF ("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
if (assert) {
- immap->im_ioport.iop_padat &= ~(0x8000 >> FPGA_PROGRAM_BIT_NUM);
- PRINTF("asserted\n");
- }
- else {
- immap->im_ioport.iop_padat |= (0x8000 >> FPGA_PROGRAM_BIT_NUM);
- PRINTF("deasserted\n");
+ immap->im_ioport.iop_padat &=
+ ~(0x8000 >> FPGA_PROGRAM_BIT_NUM);
+ PRINTF ("asserted\n");
+ } else {
+ immap->im_ioport.iop_padat |=
+ (0x8000 >> FPGA_PROGRAM_BIT_NUM);
+ PRINTF ("deasserted\n");
}
return assert;
}
@@ -238,18 +231,16 @@
* Test the state of the active-low FPGA INIT line. Return 1 on INIT
* asserted (low).
*/
-int
-fpga_init_fn(int cookie)
+int fpga_init_fn (int cookie)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
- PRINTF("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
- if(immap->im_cpm.cp_pbdat & (0x80000000 >> FPGA_INIT_BIT_NUM)) {
- PRINTF("high\n");
+ PRINTF ("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
+ if (immap->im_cpm.cp_pbdat & (0x80000000 >> FPGA_INIT_BIT_NUM)) {
+ PRINTF ("high\n");
return 0;
- }
- else {
- PRINTF("low\n");
+ } else {
+ PRINTF ("low\n");
return 1;
}
}
@@ -258,18 +249,16 @@
/*
* Test the state of the active-high FPGA DONE pin
*/
-int
-fpga_done_fn(int cookie)
+int fpga_done_fn (int cookie)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
- PRINTF("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
+ PRINTF ("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
if (immap->im_cpm.cp_pbdat & (0x80000000 >> FPGA_DONE_BIT_NUM)) {
- PRINTF("high\n");
+ PRINTF ("high\n");
return FPGA_SUCCESS;
- }
- else {
- PRINTF("low\n");
+ } else {
+ PRINTF ("low\n");
return FPGA_FAIL;
}
}
@@ -278,43 +267,40 @@
/*
* Read FPGA SelectMap data.
*/
-int
-fpga_read_data_fn(unsigned char *data, int cookie)
+int fpga_read_data_fn (unsigned char *data, int cookie)
{
- vu_char *p = (vu_char *)SELECTMAP_BASE;
+ vu_char *p = (vu_char *) SELECTMAP_BASE;
*data = *p;
#if 0
- PRINTF("%s: Read 0x%x into 0x%p\n", __FUNCTION__, (int)data, data);
+ PRINTF ("%s: Read 0x%x into 0x%p\n", __FUNCTION__, (int) data, data);
#endif
- return (int)data;
+ return (int) data;
}
/*
* Write data to the FPGA SelectMap port
*/
-int
-fpga_write_data_fn(unsigned char data, int flush, int cookie)
+int fpga_write_data_fn (unsigned char data, int flush, int cookie)
{
- vu_char *p = (vu_char *)SELECTMAP_BASE;
+ vu_char *p = (vu_char *) SELECTMAP_BASE;
#if 0
- PRINTF("%s: Write Data 0x%x\n", __FUNCTION__, (int)data);
+ PRINTF ("%s: Write Data 0x%x\n", __FUNCTION__, (int) data);
#endif
*p = data;
- return (int)data;
+ return (int) data;
}
/*
* Abort and FPGA operation
*/
-int
-fpga_abort_fn(int cookie)
+int fpga_abort_fn (int cookie)
{
- PRINTF("%s:%d: FPGA program sequence aborted\n",
- __FUNCTION__, __LINE__);
+ PRINTF ("%s:%d: FPGA program sequence aborted\n",
+ __FUNCTION__, __LINE__);
return FPGA_FAIL;
}
@@ -324,11 +310,10 @@
* FPGA reset is asserted to keep the FPGA from starting up after
* configuration.
*/
-int
-fpga_pre_config_fn(int cookie)
+int fpga_pre_config_fn (int cookie)
{
- PRINTF("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
- fpga_reset(TRUE);
+ PRINTF ("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
+ fpga_reset (TRUE);
return 0;
}
@@ -337,22 +322,21 @@
* FPGA post configuration function. Blip the FPGA reset line and then see if
* the FPGA appears to be running.
*/
-int
-fpga_post_config_fn(int cookie)
+int fpga_post_config_fn (int cookie)
{
int rc;
- PRINTF("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
- fpga_reset(TRUE);
- udelay(1000);
- fpga_reset(FALSE);
+ PRINTF ("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
+ fpga_reset (TRUE);
+ udelay (1000);
+ fpga_reset (FALSE);
udelay (1000);
/*
* Use the FPGA,s inverting bus test register to do a simple test of the
* processor interface.
*/
- rc = test_fpga_ibtr();
+ rc = test_fpga_ibtr ();
return rc;
}
@@ -367,32 +351,27 @@
* going low during configuration, so there is no need for a separate error
* function.
*/
-int
-fpga_clk_fn(int assert_clk, int flush, int cookie)
+int fpga_clk_fn (int assert_clk, int flush, int cookie)
{
return assert_clk;
}
-int
-fpga_cs_fn(int assert_cs, int flush, int cookie)
+int fpga_cs_fn (int assert_cs, int flush, int cookie)
{
return assert_cs;
}
-int
-fpga_wr_fn(int assert_write, int flush, int cookie)
+int fpga_wr_fn (int assert_write, int flush, int cookie)
{
return assert_write;
}
-int
-fpga_err_fn(int cookie)
+int fpga_err_fn (int cookie)
{
return 0;
}
-int
-fpga_busy_fn(int cookie)
+int fpga_busy_fn (int cookie)
{
return 0;
}
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index 434055c..f1d173e 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -94,7 +94,7 @@
0xfffffc05, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
/* exception (offset 0x3C in upm ram) */
- };
+};
const uint selectmap_upm_table[] = {
/* single read (offset 0x00 in upm ram) */
@@ -124,63 +124,61 @@
/*
* Check board identity. Always successful (gives information only)
*/
-int
-checkboard(void)
+int checkboard (void)
{
DECLARE_GLOBAL_DATA_PTR;
- unsigned char *s;
- unsigned char buf[64];
- int i;
+ unsigned char *s;
+ unsigned char buf[64];
+ int i;
- i = getenv_r("board_id", buf, sizeof(buf));
- s = (i>0) ? buf : NULL;
+ i = getenv_r ("board_id", buf, sizeof (buf));
+ s = (i > 0) ? buf : NULL;
if (s) {
- printf("%s ", s);
+ printf ("%s ", s);
} else {
- printf("<unknown> ");
+ printf ("<unknown> ");
}
- i = getenv_r("serial#", buf, sizeof(buf));
- s = (i>0) ? buf : NULL;
+ i = getenv_r ("serial#", buf, sizeof (buf));
+ s = (i > 0) ? buf : NULL;
if (s) {
- printf("S/N %s\n", s);
+ printf ("S/N %s\n", s);
} else {
- printf("S/N <unknown>\n");
+ printf ("S/N <unknown>\n");
}
- printf("CPU at %s MHz, ",strmhz(buf, gd->cpu_clk));
- printf("local bus at %s MHz\n", strmhz(buf, gd->bus_clk));
- return (0);
+ printf ("CPU at %s MHz, ", strmhz (buf, gd->cpu_clk));
+ printf ("local bus at %s MHz\n", strmhz (buf, gd->bus_clk));
+ return (0);
}
/*
* Initialize SDRAM
*/
-long int
-initdram(int board_type)
+long int initdram (int board_type)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immr->im_memctl;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immr->im_memctl;
- upmconfig(UPMA,
- (uint *)sdram_upm_table,
- sizeof(sdram_upm_table) / sizeof(uint)
- );
+ upmconfig (UPMA,
+ (uint *) sdram_upm_table,
+ sizeof (sdram_upm_table) / sizeof (uint)
+ );
- /*
- * Setup MAMR register
- */
- memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ /*
+ * Setup MAMR register
+ */
+ memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+ memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
- /*
- * Map CS1* to SDRAM bank
- */
- memctl->memc_or1 = CFG_OR1;
- memctl->memc_br1 = CFG_BR1;
+ /*
+ * Map CS1* to SDRAM bank
+ */
+ memctl->memc_or1 = CFG_OR1;
+ memctl->memc_br1 = CFG_BR1;
/*
* Perform SDRAM initialization sequence:
@@ -193,31 +191,31 @@
* Program SDRAM for standard operation, sequential burst, burst length
* of 4, CAS latency of 2.
*/
- memctl->memc_mar = 0x00000000;
+ memctl->memc_mar = 0x00000000;
memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
- MCR_MLCF(0) | UPMA_NOP_ADDR;
- udelay(200);
- memctl->memc_mar = 0x00000000;
+ MCR_MLCF (0) | UPMA_NOP_ADDR;
+ udelay (200);
+ memctl->memc_mar = 0x00000000;
memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
- MCR_MLCF(4) | UPMA_PRECHARGE_ADDR;
+ MCR_MLCF (4) | UPMA_PRECHARGE_ADDR;
- memctl->memc_mar = 0x00000000;
+ memctl->memc_mar = 0x00000000;
memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
- MCR_MLCF(2) | UPM_REFRESH_ADDR;
+ MCR_MLCF (2) | UPM_REFRESH_ADDR;
- memctl->memc_mar = 0x00000088;
+ memctl->memc_mar = 0x00000088;
memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
- MCR_MLCF(1) | UPMA_MRS_ADDR;
+ MCR_MLCF (1) | UPMA_MRS_ADDR;
- memctl->memc_mar = 0x00000000;
+ memctl->memc_mar = 0x00000000;
memctl->memc_mcr = MCR_UPM_A | MCR_OP_RUN | MCR_MB_CS1 |
- MCR_MLCF(0) | UPMA_NOP_ADDR;
+ MCR_MLCF (0) | UPMA_NOP_ADDR;
/*
* Enable refresh
*/
- memctl->memc_mamr |= MAMR_PTAE;
+ memctl->memc_mamr |= MAMR_PTAE;
- return (SDRAM_SIZE);
+ return (SDRAM_SIZE);
}
/*
@@ -225,42 +223,39 @@
* The DOC lives in the CS2* space
*/
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
-extern void
-doc_probe(ulong physadr);
+extern void doc_probe (ulong physadr);
-void
-doc_init(void)
+void doc_init (void)
{
- printf("Probing at 0x%.8x: ", DOC_BASE);
- doc_probe(DOC_BASE);
+ printf ("Probing at 0x%.8x: ", DOC_BASE);
+ doc_probe (DOC_BASE);
}
#endif
/*
* Miscellaneous intialization
*/
-int
-misc_init_r (void)
+int misc_init_r (void)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immr->im_memctl;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immr->im_memctl;
/*
* Set up UPMB to handle the Virtex FPGA SelectMap interface
*/
- upmconfig(UPMB, (uint *)selectmap_upm_table,
- sizeof(selectmap_upm_table) / sizeof(uint));
+ upmconfig (UPMB, (uint *) selectmap_upm_table,
+ sizeof (selectmap_upm_table) / sizeof (uint));
- memctl->memc_mbmr = 0x0;
+ memctl->memc_mbmr = 0x0;
- config_mpc8xx_ioports(immr);
+ config_mpc8xx_ioports (immr);
#if (CONFIG_COMMANDS & CFG_CMD_MII)
- mii_init();
+ mii_init ();
#endif
#if (CONFIG_FPGA)
- gen860t_init_fpga();
+ gen860t_init_fpga ();
#endif
return 0;
}
@@ -268,8 +263,7 @@
/*
* Final init hook before entering command loop.
*/
-int
-last_stage_init(void)
+int last_stage_init (void)
{
#if !defined(CONFIG_SC)
unsigned char buf[256];
@@ -278,15 +272,15 @@
/*
* Turn the beeper volume all the way down in case this is a warm boot.
*/
- set_beeper_volume(-64);
- init_beeper();
+ set_beeper_volume (-64);
+ init_beeper ();
/*
* Read the environment to see what to do with the beeper
*/
- i = getenv_r("beeper", buf, sizeof(buf));
+ i = getenv_r ("beeper", buf, sizeof (buf));
if (i > 0) {
- do_beeper(buf);
+ do_beeper (buf);
}
#endif
return 0;
@@ -295,11 +289,10 @@
/*
* Stub to make POST code happy. Can't self-poweroff, so just hang.
*/
-void
-board_poweroff(void)
+void board_poweroff (void)
{
- puts("### Please power off the board ###\n");
- while (1);
+ puts ("### Please power off the board ###\n");
+ while (1);
}
#ifdef CONFIG_POST
@@ -307,9 +300,9 @@
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
-int post_hotkeys_pressed(void)
+int post_hotkeys_pressed (void)
{
- return 0; /* No hotkeys supported */
+ return 0; /* No hotkeys supported */
}
#endif
diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c
index 7b3ebd4..1fc9545 100644
--- a/board/gen860t/ioport.c
+++ b/board/gen860t/ioport.c
@@ -199,16 +199,16 @@
* Configure the MPC8XX I/O ports per the ioport configuration table
* (taken from ./cpu/mpc8260/cpu_init.c)
*/
-void
-config_mpc8xx_ioports(volatile immap_t *immr)
+void config_mpc8xx_ioports (volatile immap_t * immr)
{
- int portnum;
+ int portnum;
- for (portnum = 0; portnum < NUM_PORTS; portnum++) {
+ for (portnum = 0; portnum < NUM_PORTS; portnum++) {
uint pmsk = 0, ppar = 0, psor = 0, pdir = 0;
uint podr = 0, pdat = 0, pint = 0;
uint msk = 1;
- mpc8xx_iop_conf_t *iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][0];
+ mpc8xx_iop_conf_t *iopc =
+ (mpc8xx_iop_conf_t *) & iop_conf_tab[portnum][0];
mpc8xx_iop_conf_t *eiopc = iopc + PORT_BITS;
/*
@@ -216,104 +216,132 @@
* in the configuration tables.
*/
if (portnum != 1) {
- iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][2];
+ iopc = (mpc8xx_iop_conf_t *) &
+ iop_conf_tab[portnum][2];
}
/*
* NOTE: index 0 refers to pin 17, index 17 refers to pin 0
*/
while (iopc < eiopc) {
- if (iopc->conf) {
+ if (iopc->conf) {
pmsk |= msk;
- if (iopc->ppar) ppar |= msk;
- if (iopc->psor) psor |= msk;
- if (iopc->pdir) pdir |= msk;
- if (iopc->podr) podr |= msk;
- if (iopc->pdat) pdat |= msk;
- if (iopc->pint) pint |= msk;
- }
- msk <<= 1;
- iopc++;
+ if (iopc->ppar)
+ ppar |= msk;
+ if (iopc->psor)
+ psor |= msk;
+ if (iopc->pdir)
+ pdir |= msk;
+ if (iopc->podr)
+ podr |= msk;
+ if (iopc->pdat)
+ pdat |= msk;
+ if (iopc->pint)
+ pint |= msk;
+ }
+ msk <<= 1;
+ iopc++;
}
- PRINTF("%s:%d:\n portnum=%d ", __FUNCTION__, __LINE__, portnum);
+ PRINTF ("%s:%d:\n portnum=%d ", __FUNCTION__, __LINE__,
+ portnum);
#ifdef IOPORT_DEBUG
- switch(portnum) {
- case 0: printf("(A)\n"); break;
- case 1: printf("(B)\n"); break;
- case 2: printf("(C)\n"); break;
- case 3: printf("(D)\n"); break;
- default: printf("(?)\n"); break;
+ switch (portnum) {
+ case 0:
+ printf ("(A)\n");
+ break;
+ case 1:
+ printf ("(B)\n");
+ break;
+ case 2:
+ printf ("(C)\n");
+ break;
+ case 3:
+ printf ("(D)\n");
+ break;
+ default:
+ printf ("(?)\n");
+ break;
}
#endif
- PRINTF(" ppar=0x%.8x pdir=0x%.8x podr=0x%.8x\n"
- " pdat=0x%.8x psor=0x%.8x pint=0x%.8x pmsk=0x%.8x\n",
- ppar, pdir, podr, pdat, psor, pint, pmsk);
+ PRINTF (" ppar=0x%.8x pdir=0x%.8x podr=0x%.8x\n"
+ " pdat=0x%.8x psor=0x%.8x pint=0x%.8x pmsk=0x%.8x\n",
+ ppar, pdir, podr, pdat, psor, pint, pmsk);
/*
* Have to handle the ioports on a port-by-port basis since there
* are three different flavors.
*/
if (pmsk != 0) {
- uint tpmsk = ~pmsk;
+ uint tpmsk = ~pmsk;
- if (0 == portnum) { /* port A */
- immr->im_ioport.iop_papar &= tpmsk;
- immr->im_ioport.iop_padat =
- (immr->im_ioport.iop_padat & tpmsk) | pdat;
- immr->im_ioport.iop_padir =
- (immr->im_ioport.iop_padir & tpmsk) | pdir;
- immr->im_ioport.iop_paodr =
- (immr->im_ioport.iop_paodr & tpmsk) | podr;
- immr->im_ioport.iop_papar |= ppar;
- }
- else if (1 == portnum) { /* port B */
- immr->im_cpm.cp_pbpar &= tpmsk;
- immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & tpmsk) | pdat;
- immr->im_cpm.cp_pbdir = (immr->im_cpm.cp_pbdir & tpmsk) | pdir;
- immr->im_cpm.cp_pbodr = (immr->im_cpm.cp_pbodr & tpmsk) | podr;
- immr->im_cpm.cp_pbpar |= ppar;
- }
- else if (2 == portnum) { /* port C */
- immr->im_ioport.iop_pcpar &= tpmsk;
- immr->im_ioport.iop_pcdat =
- (immr->im_ioport.iop_pcdat & tpmsk) | pdat;
- immr->im_ioport.iop_pcdir =
- (immr->im_ioport.iop_pcdir & tpmsk) | pdir;
- immr->im_ioport.iop_pcint =
- (immr->im_ioport.iop_pcint & tpmsk) | pint;
- immr->im_ioport.iop_pcso =
- (immr->im_ioport.iop_pcso & tpmsk) | psor;
- immr->im_ioport.iop_pcpar |= ppar;
- }
- else if (3 == portnum) { /* port D */
- immr->im_ioport.iop_pdpar &= tpmsk;
- immr->im_ioport.iop_pddat =
- (immr->im_ioport.iop_pddat & tpmsk) | pdat;
- immr->im_ioport.iop_pddir =
- (immr->im_ioport.iop_pddir & tpmsk) | pdir;
- immr->im_ioport.iop_pdpar |= ppar;
+ if (0 == portnum) { /* port A */
+ immr->im_ioport.iop_papar &= tpmsk;
+ immr->im_ioport.iop_padat =
+ (immr->im_ioport.
+ iop_padat & tpmsk) | pdat;
+ immr->im_ioport.iop_padir =
+ (immr->im_ioport.
+ iop_padir & tpmsk) | pdir;
+ immr->im_ioport.iop_paodr =
+ (immr->im_ioport.
+ iop_paodr & tpmsk) | podr;
+ immr->im_ioport.iop_papar |= ppar;
+ } else if (1 == portnum) { /* port B */
+ immr->im_cpm.cp_pbpar &= tpmsk;
+ immr->im_cpm.cp_pbdat =
+ (immr->im_cpm.
+ cp_pbdat & tpmsk) | pdat;
+ immr->im_cpm.cp_pbdir =
+ (immr->im_cpm.
+ cp_pbdir & tpmsk) | pdir;
+ immr->im_cpm.cp_pbodr =
+ (immr->im_cpm.
+ cp_pbodr & tpmsk) | podr;
+ immr->im_cpm.cp_pbpar |= ppar;
+ } else if (2 == portnum) { /* port C */
+ immr->im_ioport.iop_pcpar &= tpmsk;
+ immr->im_ioport.iop_pcdat =
+ (immr->im_ioport.
+ iop_pcdat & tpmsk) | pdat;
+ immr->im_ioport.iop_pcdir =
+ (immr->im_ioport.
+ iop_pcdir & tpmsk) | pdir;
+ immr->im_ioport.iop_pcint =
+ (immr->im_ioport.
+ iop_pcint & tpmsk) | pint;
+ immr->im_ioport.iop_pcso =
+ (immr->im_ioport.
+ iop_pcso & tpmsk) | psor;
+ immr->im_ioport.iop_pcpar |= ppar;
+ } else if (3 == portnum) { /* port D */
+ immr->im_ioport.iop_pdpar &= tpmsk;
+ immr->im_ioport.iop_pddat =
+ (immr->im_ioport.
+ iop_pddat & tpmsk) | pdat;
+ immr->im_ioport.iop_pddir =
+ (immr->im_ioport.
+ iop_pddir & tpmsk) | pdir;
+ immr->im_ioport.iop_pdpar |= ppar;
}
}
- }
+ }
- PRINTF("%s:%d: Port A:\n papar=0x%.4x padir=0x%.4x"
- " paodr=0x%.4x\n padat=0x%.4x\n", __FUNCTION__, __LINE__,
- immr->im_ioport.iop_papar, immr->im_ioport.iop_padir,
- immr->im_ioport.iop_paodr, immr->im_ioport.iop_padat);
- PRINTF("%s:%d: Port B:\n pbpar=0x%.8x pbdir=0x%.8x"
- " pbodr=0x%.8x\n pbdat=0x%.8x\n", __FUNCTION__, __LINE__,
- immr->im_cpm.cp_pbpar, immr->im_cpm.cp_pbdir,
- immr->im_cpm.cp_pbodr, immr->im_cpm.cp_pbdat);
- PRINTF("%s:%d: Port C:\n pcpar=0x%.4x pcdir=0x%.4x"
- " pcdat=0x%.4x\n pcso=0x%.4x pcint=0x%.4x\n ",
- __FUNCTION__, __LINE__, immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir, immr->im_ioport.iop_pcdat,
- immr->im_ioport.iop_pcso, immr->im_ioport.iop_pcint);
- PRINTF("%s:%d: Port D:\n pdpar=0x%.4x pddir=0x%.4x"
- " pddat=0x%.4x\n", __FUNCTION__, __LINE__,
- immr->im_ioport.iop_pdpar, immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
+ PRINTF ("%s:%d: Port A:\n papar=0x%.4x padir=0x%.4x"
+ " paodr=0x%.4x\n padat=0x%.4x\n", __FUNCTION__, __LINE__,
+ immr->im_ioport.iop_papar, immr->im_ioport.iop_padir,
+ immr->im_ioport.iop_paodr, immr->im_ioport.iop_padat);
+ PRINTF ("%s:%d: Port B:\n pbpar=0x%.8x pbdir=0x%.8x"
+ " pbodr=0x%.8x\n pbdat=0x%.8x\n", __FUNCTION__, __LINE__,
+ immr->im_cpm.cp_pbpar, immr->im_cpm.cp_pbdir,
+ immr->im_cpm.cp_pbodr, immr->im_cpm.cp_pbdat);
+ PRINTF ("%s:%d: Port C:\n pcpar=0x%.4x pcdir=0x%.4x"
+ " pcdat=0x%.4x\n pcso=0x%.4x pcint=0x%.4x\n ",
+ __FUNCTION__, __LINE__, immr->im_ioport.iop_pcpar,
+ immr->im_ioport.iop_pcdir, immr->im_ioport.iop_pcdat,
+ immr->im_ioport.iop_pcso, immr->im_ioport.iop_pcint);
+ PRINTF ("%s:%d: Port D:\n pdpar=0x%.4x pddir=0x%.4x"
+ " pddat=0x%.4x\n", __FUNCTION__, __LINE__,
+ immr->im_ioport.iop_pdpar, immr->im_ioport.iop_pddir,
+ immr->im_ioport.iop_pddat);
}
-
-/* vim: set ts=4 sw=4 tw=78: */
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
index 7ca1989..009ca30 100644
--- a/board/gw8260/gw8260.c
+++ b/board/gw8260/gw8260.c
@@ -212,16 +212,17 @@
/* */
/* */
/*********************************************************************/
-int checkboard(void)
+int checkboard (void)
{
- char *str;
- puts ("Board: Advent Networks gw8260\n");
+ char *str;
- str = getenv("serial#");
- if (str != NULL) {
- printf("SN: %s\n", str);
- }
- return 0;
+ puts ("Board: Advent Networks gw8260\n");
+
+ str = getenv ("serial#");
+ if (str != NULL) {
+ printf ("SN: %s\n", str);
+ }
+ return 0;
}
@@ -246,30 +247,31 @@
/* May cloober fr0. */
/* */
/*********************************************************************/
-static void move64(unsigned long long *src, unsigned long long *dest)
+static void move64 (unsigned long long *src, unsigned long long *dest)
{
- asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
- "stfd 0, 0(4)" /* *dest = fpr0 */
- : : : "fr0" ); /* Clobbers fr0 */
- return;
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0"); /* Clobbers fr0 */
+ return;
}
#if defined (CFG_DRAM_TEST_DATA)
-unsigned long long pattern[]= {
- 0xaaaaaaaaaaaaaaaa,
- 0xcccccccccccccccc,
- 0xf0f0f0f0f0f0f0f0,
- 0xff00ff00ff00ff00,
- 0xffff0000ffff0000,
- 0xffffffff00000000,
- 0x00000000ffffffff,
- 0x0000ffff0000ffff,
- 0x00ff00ff00ff00ff,
- 0x0f0f0f0f0f0f0f0f,
- 0x3333333333333333,
- 0x5555555555555555};
+unsigned long long pattern[] = {
+ 0xaaaaaaaaaaaaaaaa,
+ 0xcccccccccccccccc,
+ 0xf0f0f0f0f0f0f0f0,
+ 0xff00ff00ff00ff00,
+ 0xffff0000ffff0000,
+ 0xffffffff00000000,
+ 0x00000000ffffffff,
+ 0x0000ffff0000ffff,
+ 0x00ff00ff00ff00ff,
+ 0x0f0f0f0f0f0f0f0f,
+ 0x3333333333333333,
+ 0x5555555555555555
+};
/*********************************************************************/
/* NAME: mem_test_data() - test data lines for shorts and opens */
@@ -315,34 +317,34 @@
/* Assumes only one one SDRAM bank */
/* */
/*********************************************************************/
-int mem_test_data(void)
+int mem_test_data (void)
{
- unsigned long long * pmem =
- (unsigned long long *)CFG_SDRAM_BASE ;
- unsigned long long temp64;
- int num_patterns = sizeof(pattern)/ sizeof(pattern[0]);
- int i;
- unsigned int hi, lo;
+ unsigned long long *pmem = (unsigned long long *) CFG_SDRAM_BASE;
+ unsigned long long temp64;
+ int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
+ int i;
+ unsigned int hi, lo;
- for ( i = 0; i < num_patterns; i++) {
- move64(&(pattern[i]), pmem);
- move64(pmem, &temp64);
+ for (i = 0; i < num_patterns; i++) {
+ move64 (&(pattern[i]), pmem);
+ move64 (pmem, &temp64);
- /* hi = (temp64>>32) & 0xffffffff; */
- /* lo = temp64 & 0xffffffff; */
- /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
- hi = (pattern[i]>>32) & 0xffffffff;
- lo = pattern[i] & 0xffffffff;
- /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
+ hi = (pattern[i] >> 32) & 0xffffffff;
+ lo = pattern[i] & 0xffffffff;
+ /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
- if (temp64 != pattern[i]){
- printf ("\n Data Test Failed, pattern 0x%08x%08x", hi, lo);
- return 1;
+ if (temp64 != pattern[i]) {
+ printf ("\n Data Test Failed, pattern 0x%08x%08x",
+ hi, lo);
+ return 1;
+ }
}
- }
- return 0;
+ return 0;
}
#endif /* CFG_DRAM_TEST_DATA */
@@ -368,25 +370,26 @@
/* */
/* */
/*********************************************************************/
-int mem_test_address(void)
+int mem_test_address (void)
{
- volatile unsigned int * pmem = (volatile unsigned int *)CFG_SDRAM_BASE ;
- const unsigned int size = (CFG_SDRAM_SIZE * 1024 * 1024)/4;
- unsigned int i;
+ volatile unsigned int *pmem =
+ (volatile unsigned int *) CFG_SDRAM_BASE;
+ const unsigned int size = (CFG_SDRAM_SIZE * 1024 * 1024) / 4;
+ unsigned int i;
- /* write address to each location */
- for ( i = 0; i < size; i++) {
- pmem[i] = i;
- }
+ /* write address to each location */
+ for (i = 0; i < size; i++) {
+ pmem[i] = i;
+ }
- /* verify each loaction */
- for ( i = 0; i < size; i++) {
- if (pmem[i] != i) {
- printf("\n Address Test Failed at 0x%x", i);
- return 1;
+ /* verify each loaction */
+ for (i = 0; i < size; i++) {
+ if (pmem[i] != i) {
+ printf ("\n Address Test Failed at 0x%x", i);
+ return 1;
+ }
}
- }
- return 0;
+ return 0;
}
#endif /* CFG_DRAM_TEST_ADDRESS */
@@ -418,39 +421,35 @@
/* */
/* */
/*********************************************************************/
-int mem_march(volatile unsigned long long * base,
- unsigned int size,
- unsigned long long rmask,
- unsigned long long wmask,
- short read,
- short write)
+int mem_march (volatile unsigned long long *base,
+ unsigned int size,
+ unsigned long long rmask,
+ unsigned long long wmask, short read, short write)
{
- unsigned int i;
- unsigned long long temp;
- unsigned int hitemp, lotemp, himask, lomask;
+ unsigned int i;
+ unsigned long long temp;
+ unsigned int hitemp, lotemp, himask, lomask;
- for (i = 0 ; i < size ; i++) {
- if (read != 0) {
- /* temp = base[i]; */
- move64 ((unsigned long long *)&(base[i]), &temp);
- if (rmask != temp) {
- hitemp = (temp>>32) & 0xffffffff;
- lotemp = temp & 0xffffffff;
- himask = (rmask>>32) & 0xffffffff;
- lomask = rmask & 0xffffffff;
+ for (i = 0; i < size; i++) {
+ if (read != 0) {
+ /* temp = base[i]; */
+ move64 ((unsigned long long *) &(base[i]), &temp);
+ if (rmask != temp) {
+ hitemp = (temp >> 32) & 0xffffffff;
+ lotemp = temp & 0xffffffff;
+ himask = (rmask >> 32) & 0xffffffff;
+ lomask = rmask & 0xffffffff;
- printf("\n Walking one's test failed: address = 0x%08x,"
- "\n\texpected 0x%08x%08x, found 0x%08x%08x",
- i<<3, himask, lomask, hitemp, lotemp);
- return 1;
- }
+ printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
+ return 1;
+ }
+ }
+ if (write != 0) {
+ /* base[i] = wmask; */
+ move64 (&wmask, (unsigned long long *) &(base[i]));
+ }
}
- if ( write != 0 ) {
- /* base[i] = wmask; */
- move64 (&wmask, (unsigned long long *)&(base[i]));
- }
- }
- return 0;
+ return 0;
}
#endif /* CFG_DRAM_TEST_WALK */
@@ -480,43 +479,44 @@
/* */
/* */
/*********************************************************************/
-int mem_test_walk(void)
+int mem_test_walk (void)
{
- unsigned long long mask;
- volatile unsigned long long * pmem =
- (volatile unsigned long long *)CFG_SDRAM_BASE ;
- const unsigned long size = (CFG_SDRAM_SIZE * 1024 * 1024)/8;
+ unsigned long long mask;
+ volatile unsigned long long *pmem =
+ (volatile unsigned long long *) CFG_SDRAM_BASE;
+ const unsigned long size = (CFG_SDRAM_SIZE * 1024 * 1024) / 8;
- unsigned int i;
- mask = 0x01;
+ unsigned int i;
- printf("Initial Pass");
- mem_march(pmem,size,0x0,0x1,0,1);
+ mask = 0x01;
- printf("\b\b\b\b\b\b\b\b\b\b\b\b");
- printf(" ");
- printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf ("Initial Pass");
+ mem_march (pmem, size, 0x0, 0x1, 0, 1);
- for (i = 0 ; i < 63 ; i++) {
- printf("Pass %2d", i+2);
- if ( mem_march(pmem,size, mask,mask << 1, 1, 1) != 0 ){
- /*printf("mask: 0x%x, pass: %d, ", mask, i);*/
- return 1;
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+ for (i = 0; i < 63; i++) {
+ printf ("Pass %2d", i + 2);
+ if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
+ /*printf("mask: 0x%x, pass: %d, ", mask, i); */
+ return 1;
+ }
+ mask = mask << 1;
+ printf ("\b\b\b\b\b\b\b");
}
- mask = mask<<1;
- printf("\b\b\b\b\b\b\b");
- }
- printf("Last Pass");
- if (mem_march(pmem, size, 0, mask, 0, 1) != 0) {
- /* printf("mask: 0x%x", mask); */
- return 1;
- }
- printf("\b\b\b\b\b\b\b\b\b");
- printf(" ");
- printf("\b\b\b\b\b\b\b\b\b");
+ printf ("Last Pass");
+ if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
+ /* printf("mask: 0x%x", mask); */
+ return 1;
+ }
+ printf ("\b\b\b\b\b\b\b\b\b");
+ printf (" ");
+ printf ("\b\b\b\b\b\b\b\b\b");
- return 0;
+ return 0;
}
/*********************************************************************/
@@ -542,46 +542,46 @@
/* */
/* */
/*********************************************************************/
-int testdram(void)
+int testdram (void)
{
- char *s;
- int rundata, runaddress, runwalk;
+ char *s;
+ int rundata, runaddress, runwalk;
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ s = getenv ("testdramdata");
+ rundata = (s && (*s == 'y')) ? 1 : 0;
+ s = getenv ("testdramaddress");
+ runaddress = (s && (*s == 'y')) ? 1 : 0;
+ s = getenv ("testdramwalk");
+ runwalk = (s && (*s == 'y')) ? 1 : 0;
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf("Testing RAM ... ");
- }
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf ("Testing RAM ... ");
+ }
#ifdef CFG_DRAM_TEST_DATA
- if (rundata == 1) {
- if (mem_test_data() == 1){
- return 1;
+ if (rundata == 1) {
+ if (mem_test_data () == 1) {
+ return 1;
+ }
}
- }
#endif
#ifdef CFG_DRAM_TEST_ADDRESS
- if (runaddress == 1) {
- if (mem_test_address() == 1){
- return 1;
+ if (runaddress == 1) {
+ if (mem_test_address () == 1) {
+ return 1;
+ }
}
- }
#endif
#ifdef CFG_DRAM_TEST_WALK
- if (runwalk == 1) {
- if (mem_test_walk() == 1){
- return 1;
+ if (runwalk == 1) {
+ if (mem_test_walk () == 1) {
+ return 1;
+ }
}
- }
#endif
- if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf("passed");
- }
- return 0;
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf ("passed");
+ }
+ return 0;
}
#endif /* CFG_DRAM_TEST */
@@ -606,52 +606,52 @@
/* */
/* */
/*********************************************************************/
-long int initdram(int board_type)
+long int initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0, *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
- ulong psdmr = CFG_PSDMR;
- int i;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
+ ulong psdmr = CFG_PSDMR;
+ int i;
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
- */
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
- memctl->memc_psrt = CFG_PSRT;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++){
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++) {
+ *ramaddr = c;
+ }
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
*ramaddr = c;
- }
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
- /* return total ram size */
- return (CFG_SDRAM0_SIZE * 1024 * 1024);
+ /* return total ram size */
+ return (CFG_SDRAM0_SIZE * 1024 * 1024);
}
/*********************************************************************/
diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile
index 378428e..e5d8446 100644
--- a/board/m5272c3/Makefile
+++ b/board/m5272c3/Makefile
@@ -28,7 +28,7 @@
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
- $(AR) crv $@ $^
+ $(AR) crv $@ $(OBJS)
#########################################################################
diff --git a/board/m5272c3/config.mk b/board/m5272c3/config.mk
index e0cd8da..ccb2cf7 100644
--- a/board/m5272c3/config.mk
+++ b/board/m5272c3/config.mk
@@ -22,4 +22,4 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0x3e0000
+TEXT_BASE = 0xffe00000
diff --git a/board/m5272c3/m5272c3.c b/board/m5272c3/m5272c3.c
index 91ec9a1..0dfeaf2 100644
--- a/board/m5272c3/m5272c3.c
+++ b/board/m5272c3/m5272c3.c
@@ -22,14 +22,31 @@
*/
#include <common.h>
+#include <asm/m5272.h>
+#include <asm/immap_5272.h>
-int checkboard (void)
-{
- puts ("MOTOROLA MCF5272C3 Evaluation Board\n");
+
+int checkboard (void) {
+ puts ("Board: ");
+ puts("MOTOROLA MCF5272C3 EVB\n");
return 0;
-}
+ };
+
+long int initdram (int board_type) {
+ volatile sdramctrl_t * sdp = (sdramctrl_t *)(CFG_MBAR + MCFSIM_SDCR);
+
+ sdp->sdram_sdtr = 0xf539;
+ sdp->sdram_sdcr = 0x4211;
+
+ /* Dummy write to start SDRAM */
+ *((volatile unsigned long *)0) = 0;
+
+ return CFG_SDRAM_SIZE * 1024 * 1024;
+ };
+
+int testdram (void) {
+ /* TODO: XXX XXX XXX */
+ printf ("DRAM test not implemented!\n");
-long int initdram (int board_type)
-{
- return 0x400000;
+ return (0);
}
diff --git a/board/m5272c3/u-boot.lds b/board/m5272c3/u-boot.lds
index 0d3829a..f4aa16a 100644
--- a/board/m5272c3/u-boot.lds
+++ b/board/m5272c3/u-boot.lds
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -22,7 +22,7 @@
*/
OUTPUT_ARCH(m68k)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
@@ -56,15 +56,14 @@
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- cpu/coldfire/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/string.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_generic/zlib.o (.text)
+ cpu/mcf52x2/start.o (.text)
+ lib_m68k/traps.o (.text)
+ cpu/mcf52x2/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
-/* . = env_offset; */
- common/environment.o(.text)
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
*(.text)
*(.fixup)
@@ -85,9 +84,12 @@
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
+
.reloc :
{
+ __got_start = .;
*(.got)
+ __got_end = .;
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
@@ -108,6 +110,11 @@
_edata = .;
PROVIDE (edata = .);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
diff --git a/board/m5272c3/u-boot.lds.debug b/board/m5272c3/u-boot.lds.debug
deleted file mode 100644
index cb2a729..0000000
--- a/board/m5272c3/u-boot.lds.debug
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
-
- . = env_offset;
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile
index 378428e..e5d8446 100644
--- a/board/m5282evb/Makefile
+++ b/board/m5282evb/Makefile
@@ -28,7 +28,7 @@
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
- $(AR) crv $@ $^
+ $(AR) crv $@ $(OBJS)
#########################################################################
diff --git a/board/m5282evb/config.mk b/board/m5282evb/config.mk
index e0cd8da..8484307 100644
--- a/board/m5282evb/config.mk
+++ b/board/m5282evb/config.mk
@@ -22,4 +22,4 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0x3e0000
+TEXT_BASE = 0x20000
diff --git a/board/m5282evb/u-boot.lds b/board/m5282evb/u-boot.lds
index 0d3829a..d790018 100644
--- a/board/m5282evb/u-boot.lds
+++ b/board/m5282evb/u-boot.lds
@@ -22,7 +22,7 @@
*/
OUTPUT_ARCH(m68k)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
@@ -56,7 +56,7 @@
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- cpu/coldfire/start.o (.text)
+ cpu/mcf52x2/start.o (.text)
common/dlmalloc.o (.text)
lib_generic/string.o (.text)
lib_generic/vsprintf.o (.text)
@@ -85,9 +85,11 @@
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
- .reloc :
+ .reloc :
{
+ __got_start = .;
*(.got)
+ __got_end = .;
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
@@ -108,6 +110,10 @@
_edata = .;
PROVIDE (edata = .);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
diff --git a/board/m5282evb/u-boot.lds.debug b/board/m5282evb/u-boot.lds.debug
deleted file mode 100644
index cb2a729..0000000
--- a/board/m5282evb/u-boot.lds.debug
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
-
- . = env_offset;
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/ppmc8260/Makefile b/board/ppmc8260/Makefile
index 420ee9c..351f4ee 100644
--- a/board/ppmc8260/Makefile
+++ b/board/ppmc8260/Makefile
@@ -25,7 +25,7 @@
LIB = lib$(BOARD).a
-OBJS := ppmc8260.o strataflash.o
+OBJS := ppmc8260.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h
index f92f3fd..71b0497 100644
--- a/board/siemens/IAD210/atm.h
+++ b/board/siemens/IAD210/atm.h
@@ -1,9 +1,9 @@
-typedef unsigned char uint8;
+typedef unsigned char uint8;
typedef unsigned short uint16;
-typedef unsigned int uint32;
-typedef volatile unsigned char vuint8;
+typedef unsigned int uint32;
+typedef volatile unsigned char vuint8;
typedef volatile unsigned short vuint16;
-typedef volatile unsigned int vuint32;
+typedef volatile unsigned int vuint32;
#define DPRAM_ATM CFG_IMMR + 0x3000
@@ -19,7 +19,7 @@
#define NUM_AP_ENTRIES (NUM_CONNECTIONS+1)
#define NUM_MPHYPT_ENTRIES 1
#define NUM_APCP_ENTRIES 1
-#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */
+#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */
#define NUM_TQ_ENTRIES 12
#define SIZE_OF_CT_ENTRY 64
@@ -31,16 +31,16 @@
#define SIZE_OF_APCT_ENTRY 2
#define SIZE_OF_TQ_ENTRY 2
-#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64*/
-#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32*/
-#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32*/
-#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4*/
+#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64 */
+#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32 */
+#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32 */
+#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4 */
#define AM_BASE (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY)
-#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2*/
+#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2 */
#define AP_BASE (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY)
-#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2*/
-#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2*/
-#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2*/
+#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2 */
+#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2 */
+#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2 */
#define ATM_DPRAM_SIZE ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN)
#define CT_PTR(base) ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE))
@@ -55,62 +55,62 @@
#define TQ_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE))
/* SAR registers */
-#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */
-#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */
-#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */
-#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */
-#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */
-#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */
-#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */
-#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */
-#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */
-#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */
-#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */
-#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */
-#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */
-#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */
-#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */
-#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */
-#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */
-#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */
-#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */
-#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */
-#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */
-#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */
-#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */
-#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */
-#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */
-#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */
-#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */
-#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */
-#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */
-#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */
-#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */
-#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */
-#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */
-#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */
-#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */
-#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */
-#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */
-#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */
-#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */
-#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */
-#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */
-#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */
-#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */
-#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */
-#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */
+#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */
+#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */
+#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */
+#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */
+#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */
+#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */
+#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */
+#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */
+#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */
+#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */
+#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */
+#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */
+#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */
+#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */
+#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */
+#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */
+#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */
+#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */
+#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */
+#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */
+#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */
+#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */
+#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */
+#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */
+#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */
+#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */
+#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */
+#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */
+#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */
+#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */
+#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */
+#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */
+#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */
+#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */
+#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */
+#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */
+#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */
+#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */
+#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */
+#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */
+#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */
+#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */
+#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */
+#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */
+#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */
/* ESAR registers */
-#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */
-#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */
-#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */
-#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */
-#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */
-#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */
-#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */
-#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */
-#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */
+#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */
+#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */
+#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */
+#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */
+#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */
+#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */
+#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */
+#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */
+#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */
/* UTOPIA Mode Register */
#define UTMODE(base) (CAST(vuint32 *)(base + 0x0978))
@@ -139,108 +139,104 @@
#define NUM_INT_ENTRIES 80
#define SIZE_OF_INT_ENTRY 4
-struct apc_params_t
-{
- vuint16 apct_base1; /* APC Table - First Priority Base pointer */
- vuint16 apct_end1; /* First APC Table - Length */
- vuint16 apct_ptr1; /* First APC Table Pointer */
- vuint16 apct_sptr1; /* APC Table First Priority Service pointer */
- vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */
- vuint16 etqend; /* Enhanced Transmit Queue End pointer */
- vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */
- vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */
- vuint16 apc_mi; /* APC - Max Iteration */
- vuint16 ncits; /* Number of Cells In TimeSlot */
- vuint16 apcnt; /* APC - N Timer */
- vuint16 reserved1; /* reserved */
- vuint16 eapcst; /* APC status */
- vuint16 ptp_counter; /* PTP queue length */
- vuint16 ptp_txch; /* PTP channel */
- vuint16 reserved2; /* reserved */
+struct apc_params_t {
+ vuint16 apct_base1; /* APC Table - First Priority Base pointer */
+ vuint16 apct_end1; /* First APC Table - Length */
+ vuint16 apct_ptr1; /* First APC Table Pointer */
+ vuint16 apct_sptr1; /* APC Table First Priority Service pointer */
+ vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */
+ vuint16 etqend; /* Enhanced Transmit Queue End pointer */
+ vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */
+ vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */
+ vuint16 apc_mi; /* APC - Max Iteration */
+ vuint16 ncits; /* Number of Cells In TimeSlot */
+ vuint16 apcnt; /* APC - N Timer */
+ vuint16 reserved1; /* reserved */
+ vuint16 eapcst; /* APC status */
+ vuint16 ptp_counter; /* PTP queue length */
+ vuint16 ptp_txch; /* PTP channel */
+ vuint16 reserved2; /* reserved */
};
-struct ct_entry_t
-{
- /* RCT */
- unsigned fhnt : 1;
- unsigned pm_rct : 1;
- unsigned reserved0 : 6;
- unsigned hec : 1;
- unsigned clp : 1;
- unsigned cng_ncrc : 1;
- unsigned inf_rct : 1;
- unsigned cngi_ptp : 1;
- unsigned cdis_rct : 1;
- unsigned aal_rct : 2;
- uint16 rbalen;
- uint32 rcrc;
- uint32 rb_ptr;
- uint16 rtmlen;
- uint16 rbd_ptr;
- uint16 rbase;
- uint16 tstamp;
- uint16 imask;
- unsigned ft : 2;
- unsigned nim : 1;
- unsigned reserved1 : 2;
- unsigned rpmt : 6;
- unsigned reserved2 : 5;
- uint8 reserved3[8];
- /* TCT */
- unsigned reserved4 : 1;
- unsigned pm_tct : 1;
- unsigned reserved5 : 6;
- unsigned pc : 1;
- unsigned reserved6 : 2;
- unsigned inf_tct : 1;
- unsigned cr10 : 1;
- unsigned cdis_tct : 1;
- unsigned aal_tct : 2;
- uint16 tbalen;
- uint32 tcrc;
- uint32 tb_ptr;
- uint16 ttmlen;
- uint16 tbd_ptr;
- uint16 tbase;
- unsigned reserved7 : 5;
- unsigned tpmt : 6;
- unsigned reserved8 : 3;
- unsigned avcf : 1;
- unsigned act : 1;
- uint32 chead;
- uint16 apcl;
- uint16 apcpr;
- unsigned out : 1;
- unsigned bnr : 1;
- unsigned tservice : 2;
- unsigned apcp : 12;
- uint16 apcpf;
+struct ct_entry_t {
+ /* RCT */
+ unsigned fhnt:1;
+ unsigned pm_rct:1;
+ unsigned reserved0:6;
+ unsigned hec:1;
+ unsigned clp:1;
+ unsigned cng_ncrc:1;
+ unsigned inf_rct:1;
+ unsigned cngi_ptp:1;
+ unsigned cdis_rct:1;
+ unsigned aal_rct:2;
+ uint16 rbalen;
+ uint32 rcrc;
+ uint32 rb_ptr;
+ uint16 rtmlen;
+ uint16 rbd_ptr;
+ uint16 rbase;
+ uint16 tstamp;
+ uint16 imask;
+ unsigned ft:2;
+ unsigned nim:1;
+ unsigned reserved1:2;
+ unsigned rpmt:6;
+ unsigned reserved2:5;
+ uint8 reserved3[8];
+ /* TCT */
+ unsigned reserved4:1;
+ unsigned pm_tct:1;
+ unsigned reserved5:6;
+ unsigned pc:1;
+ unsigned reserved6:2;
+ unsigned inf_tct:1;
+ unsigned cr10:1;
+ unsigned cdis_tct:1;
+ unsigned aal_tct:2;
+ uint16 tbalen;
+ uint32 tcrc;
+ uint32 tb_ptr;
+ uint16 ttmlen;
+ uint16 tbd_ptr;
+ uint16 tbase;
+ unsigned reserved7:5;
+ unsigned tpmt:6;
+ unsigned reserved8:3;
+ unsigned avcf:1;
+ unsigned act:1;
+ uint32 chead;
+ uint16 apcl;
+ uint16 apcpr;
+ unsigned out:1;
+ unsigned bnr:1;
+ unsigned tservice:2;
+ unsigned apcp:12;
+ uint16 apcpf;
};
-struct tcte_entry_t
-{
- unsigned res1 : 4;
- unsigned scr : 12;
- uint16 scrf;
- uint16 bt;
- uint16 buptrh;
- uint32 buptrl;
- unsigned vbr2 : 1;
- unsigned res2 : 15;
- uint16 oobr;
- uint16 res3[8];
+struct tcte_entry_t {
+ unsigned res1:4;
+ unsigned scr:12;
+ uint16 scrf;
+ uint16 bt;
+ uint16 buptrh;
+ uint32 buptrl;
+ unsigned vbr2:1;
+ unsigned res2:15;
+ uint16 oobr;
+ uint16 res3[8];
};
#define SIZE_OF_RBD 12
#define SIZE_OF_TBD 12
-struct atm_bd_t
-{
- vuint16 flags;
- vuint16 length;
- unsigned char * buffer_ptr;
- vuint16 cpcs_uu_cpi;
- vuint16 reserved;
+struct atm_bd_t {
+ vuint16 flags;
+ vuint16 length;
+ unsigned char *buffer_ptr;
+ vuint16 cpcs_uu_cpi;
+ vuint16 reserved;
};
/* BD flags */
@@ -259,35 +255,33 @@
#define LEN_ERROR 0x0002
#define CRC_ERROR 0x0001
-struct atm_connection_t
-{
- struct atm_bd_t * rbd_ptr;
- int num_rbd;
- struct atm_bd_t * tbd_ptr;
- int num_tbd;
- struct ct_entry_t * ct_ptr;
- struct tcte_entry_t * tcte_ptr;
- void * drv;
- void (* notify)(void * drv, int event);
+struct atm_connection_t {
+ struct atm_bd_t *rbd_ptr;
+ int num_rbd;
+ struct atm_bd_t *tbd_ptr;
+ int num_tbd;
+ struct ct_entry_t *ct_ptr;
+ struct tcte_entry_t *tcte_ptr;
+ void *drv;
+ void (*notify) (void *drv, int event);
};
-struct atm_driver_t
-{
- int loaded;
- int started;
- char * csram;
- int csram_size;
- uint32 * am_top;
- uint16 * ap_top;
- uint32 * int_reload_ptr;
- uint32 * int_serv_ptr;
- struct atm_bd_t * rbd_base_ptr;
- struct atm_bd_t * tbd_base_ptr;
- unsigned linerate_in_bps;
+struct atm_driver_t {
+ int loaded;
+ int started;
+ char *csram;
+ int csram_size;
+ uint32 *am_top;
+ uint16 *ap_top;
+ uint32 *int_reload_ptr;
+ uint32 *int_serv_ptr;
+ struct atm_bd_t *rbd_base_ptr;
+ struct atm_bd_t *tbd_base_ptr;
+ unsigned linerate_in_bps;
};
extern struct atm_connection_t g_conn[NUM_CONNECTIONS];
extern struct atm_driver_t g_atm;
-extern int atmLoad(void);
-extern void atmUnload(void);
+extern int atmLoad (void);
+extern void atmUnload (void);
diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c
index 3b93794..661bf66 100644
--- a/board/siemens/SCM/fpga_scm.c
+++ b/board/siemens/SCM/fpga_scm.c
@@ -28,77 +28,77 @@
#include "../common/fpga.h"
fpga_t fpga_list[] = {
- { "FIOX" , CFG_FIOX_BASE ,
- CFG_PD_FIOX_INIT , CFG_PD_FIOX_PROG , CFG_PD_FIOX_DONE },
- { "FDOHM", CFG_FDOHM_BASE,
- CFG_PD_FDOHM_INIT, CFG_PD_FDOHM_PROG, CFG_PD_FDOHM_DONE }
+ {"FIOX", CFG_FIOX_BASE,
+ CFG_PD_FIOX_INIT, CFG_PD_FIOX_PROG, CFG_PD_FIOX_DONE}
+ ,
+ {"FDOHM", CFG_FDOHM_BASE,
+ CFG_PD_FDOHM_INIT, CFG_PD_FDOHM_PROG, CFG_PD_FDOHM_DONE}
};
-int fpga_count = sizeof(fpga_list) / sizeof(fpga_t);
+int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
-ulong fpga_control (fpga_t* fpga, int cmd)
+ulong fpga_control (fpga_t * fpga, int cmd)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
- switch (cmd) {
- case FPGA_INIT_IS_HIGH:
- immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */
- return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1:0;
+ switch (cmd) {
+ case FPGA_INIT_IS_HIGH:
+ immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */
+ return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0;
- case FPGA_INIT_SET_LOW:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
- break;
+ case FPGA_INIT_SET_LOW:
+ immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
+ immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
+ break;
- case FPGA_INIT_SET_HIGH:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd |= fpga->init_mask;
- break;
+ case FPGA_INIT_SET_HIGH:
+ immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
+ immr->im_ioport.iop_pdatd |= fpga->init_mask;
+ break;
- case FPGA_PROG_SET_LOW:
- immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
- break;
+ case FPGA_PROG_SET_LOW:
+ immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
+ break;
- case FPGA_PROG_SET_HIGH:
- immr->im_ioport.iop_pdatd |= fpga->prog_mask;
- break;
+ case FPGA_PROG_SET_HIGH:
+ immr->im_ioport.iop_pdatd |= fpga->prog_mask;
+ break;
- case FPGA_DONE_IS_HIGH:
- return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1:0;
+ case FPGA_DONE_IS_HIGH:
+ return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0;
- case FPGA_READ_MODE:
- break;
+ case FPGA_READ_MODE:
+ break;
- case FPGA_LOAD_MODE:
- break;
+ case FPGA_LOAD_MODE:
+ break;
- case FPGA_GET_ID:
- if (fpga->conf_base == CFG_FIOX_BASE) {
- ulong ver = *(volatile ulong *)(fpga->conf_base + 0x10);
- return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
- }
- else if (fpga->conf_base == CFG_FDOHM_BASE) {
- return (*(volatile ushort *)fpga->conf_base) & 0xff;
- }
- else {
- return *(volatile ulong *)fpga->conf_base;
- }
+ case FPGA_GET_ID:
+ if (fpga->conf_base == CFG_FIOX_BASE) {
+ ulong ver =
+ *(volatile ulong *) (fpga->conf_base + 0x10);
+ return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
+ } else if (fpga->conf_base == CFG_FDOHM_BASE) {
+ return (*(volatile ushort *) fpga->conf_base) & 0xff;
+ } else {
+ return *(volatile ulong *) fpga->conf_base;
+ }
- case FPGA_INIT_PORTS:
- immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */
- immr->im_ioport.iop_psord &= ~fpga->init_mask;
- immr->im_ioport.iop_pdird &= ~fpga->init_mask;
+ case FPGA_INIT_PORTS:
+ immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */
+ immr->im_ioport.iop_psord &= ~fpga->init_mask;
+ immr->im_ioport.iop_pdird &= ~fpga->init_mask;
- immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */
- immr->im_ioport.iop_psord &= ~fpga->prog_mask;
- immr->im_ioport.iop_pdird |= fpga->prog_mask;
+ immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */
+ immr->im_ioport.iop_psord &= ~fpga->prog_mask;
+ immr->im_ioport.iop_pdird |= fpga->prog_mask;
- immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */
- immr->im_ioport.iop_psord &= ~fpga->done_mask;
- immr->im_ioport.iop_pdird &= ~fpga->done_mask;
+ immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */
+ immr->im_ioport.iop_psord &= ~fpga->done_mask;
+ immr->im_ioport.iop_pdird &= ~fpga->done_mask;
- break;
+ break;
- }
- return 0;
+ }
+ return 0;
}
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 94874dd..f8ebef6 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -54,7 +54,7 @@
unsigned short data;
int rcode = 0;
-#ifdef CONFIG_8xx
+#if defined(CONFIG_8xx) || defined(CONFIG_MCF52x2)
mii_init ();
#endif
diff --git a/cpu/coldfire/cpu.c b/cpu/coldfire/cpu.c
deleted file mode 100644
index 5ce0639..0000000
--- a/cpu/coldfire/cpu.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#ifdef CONFIG_M5272
-#include <asm/m5272.h>
-#endif
-#ifdef CONFIG_M5282
-#include <asm/m5282.h>
-#endif
-#include <asm/cache.h>
-
-int do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- return 0;
-}
-
-unsigned long get_tbclk (void)
-{
- return CFG_HZ;
-}
-
-int checkcpu (void)
-{
-#ifdef CONFIG_M5272
- puts ("MOTOROLA Coldfire MCF5272\n");
-#endif
-#ifdef CONFIG_M5282
- puts ("MOTOROLA Coldfire MCF5282\n");
-#endif
- return 0;
-}
-
-void do_exception (void)
-{
- printf ("\n\n*** Unexpected exception ... Reset Board! ***\n");
- for (;;);
-}
-
-void do_buserror (void)
-{
- printf ("\n\n*** Bus error ... Reset Board! ***\n");
- for (;;);
-}
-
-void do_addresserror (void)
-{
- printf ("\n\n*** Address error ... Reset Board! ***\n");
- for (;;);
-}
-
-void trap_init (ulong value)
-{
- extern void buserror_handler (void);
- extern void addresserror_handler (void);
- extern void exception_handler (void);
- unsigned long *vec = 0;
- int i;
-
- vec[2] = buserror_handler;
- vec[3] = addresserror_handler;
- for (i = 4; i < 256; i++) {
- vec[i] = exception_handler;
- }
-}
diff --git a/cpu/coldfire/fec.c b/cpu/coldfire/fec.c
deleted file mode 100644
index 5062741..0000000
--- a/cpu/coldfire/fec.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50000
-
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-#define TX_BUF_CNT 2
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-
-#ifdef CONFIG_M5272
-#define FEC_ADDR 0x10000840
-#endif
-#ifdef CONFIG_M5282
-#define FEC_ADDR 0x40001000
-#endif
-
-#undef ET_DEBUG
-
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
-
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = 0x380000;
-
-
-int eth_send (volatile void *packet, int length)
-{
- int j, rc;
- volatile fec_t *fecp = FEC_ADDR;
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
- && (j < TOUT_LOOP)) {
- udelay (1);
- j++;
- }
- if (j >= TOUT_LOOP) {
- printf ("TX not ready\n");
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
-
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
- && (j < TOUT_LOOP)) {
- udelay (1);
- j++;
- }
- if (j >= TOUT_LOOP) {
- printf ("TX timeout\n");
- }
-#ifdef ET_DEBUG
- printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2);
-#endif
- /* return only status bits */ ;
- rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-int eth_rx (void)
-{
- int length;
- volatile fec_t *fecp = FEC_ADDR;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- NetReceive (NetRxPackets[rxIdx], length - 4);
- }
-
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
-
-int eth_init (bd_t * bd)
-{
-
- int i;
- volatile fec_t *fecp = FEC_ADDR;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return 0;
- }
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt */
- fecp->fec_ievent = 0xffffffff;
-
- /* Set station address */
-#define ea bd->bi_enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
- (ea[2] << 8) | (ea[3]);
- fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16);
-#undef ea
-
- /* Clear multicast address hash table
- */
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
- /*
- * Setup Buffers and Buffer Desriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* Set receive and transmit descriptor base
- */
- fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
- fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
- /* Enable MII mode
- */
-
- /* Half duplex mode */
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE;
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE;
- fecp->fec_x_cntrl = 0;
-
- fecp->fec_mii_speed = 0;
-
- /* Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
-
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
-
- return 1;
-}
-
-
-void eth_halt (void)
-{
- volatile fec_t *fecp = FEC_ADDR;
-
- fecp->fec_ecntrl = 0;
-}
-#endif
diff --git a/cpu/coldfire/fec.h b/cpu/coldfire/fec.h
deleted file mode 100644
index a49417c..0000000
--- a/cpu/coldfire/fec.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FEC_H_
-#define _FEC_H_
-
-
-#endif /* _FEC_H_ */
diff --git a/cpu/coldfire/interrupts.c b/cpu/coldfire/interrupts.c
deleted file mode 100644
index 3861ff1..0000000
--- a/cpu/coldfire/interrupts.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#ifdef CONFIG_M5272
-#include <asm/m5272.h>
-#endif
-#ifdef CONFIG_M5282
-#include <asm/m5282.h>
-#endif
-#include <asm/mcftimer.h>
-#include <asm/processor.h>
-#include <commproc.h>
-
-static ulong timestamp;
-static unsigned short lastinc;
-
-void coldfire_timer_init (void)
-{
- volatile unsigned short *timerp;
-
- timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE4);
- timestamp = 0;
-
-#ifdef CONFIG_M5272
- /* Set up TIMER 4 as poll clock */
- timerp[MCFTIMER_TMR] = MCFTIMER_TMR_DISABLE;
- timerp[MCFTIMER_TRR] = lastinc = 0;
- timerp[MCFTIMER_TMR] = (65 << 8) | MCFTIMER_TMR_CLK1 |
- MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE;
-#endif
-
-#ifdef CONFIG_M5282
- /* Set up TIMER 4 as poll clock */
- timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW;
- timerp[MCFTIMER_PMR] = lastinc = 0;
- timerp[MCFTIMER_PCSR] =
- (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
-#endif
-}
-
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-}
-void irq_free_handler (int vec)
-{
-}
-
-int interrupt_init (void)
-{
- coldfire_timer_init ();
- return 0;
-}
-
-void enable_interrupts ()
-{
-}
-int disable_interrupts ()
-{
- return 0;
-}
-
-void set_timer (ulong t)
-{
- volatile unsigned short *timerp;
-
- timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE4);
- timestamp = 0;
-
-#ifdef CONFIG_M5272
- timerp[MCFTIMER_TRR] = lastinc = 0;
-#endif
-
-#ifdef CONFIG_M5282
- timerp[MCFTIMER_PMR] = lastinc = 0;
-#endif
-}
-
-ulong get_timer (ulong base)
-{
- unsigned short now, diff;
- volatile unsigned short *timerp;
-
- timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE4);
-
-#ifdef CONFIG_M5272
- now = timerp[MCFTIMER_TCN];
- diff = (now - lastinc);
-#endif
-
-#ifdef CONFIG_M5282
- now = timerp[MCFTIMER_PCNTR];
- diff = -(now - lastinc);
-#endif
-
- timestamp += diff;
- lastinc = now;
- return timestamp - base;
-}
-
-void wait_ticks (unsigned long ticks)
-{
- set_timer (0);
- while (get_timer (0) < ticks);
-}
diff --git a/cpu/coldfire/serial.c b/cpu/coldfire/serial.c
deleted file mode 100644
index a140fe3..0000000
--- a/cpu/coldfire/serial.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-
-#ifdef CONFIG_M5272
-#include <asm/m5272.h>
-#endif
-#ifdef CONFIG_M5282
-#include <asm/m5282.h>
-#endif
-#include <asm/mcfuart.h>
-
-#define DoubleClock(a) ((double)(MCF_CLK) / 32.0 / (double)(a))
-
-void rs_serial_setbaudrate (int port, int baudrate)
-{
-#ifdef CONFIG_M5272
- volatile unsigned char *uartp;
- double clock, fraction;
-
- if (port == 0)
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE1);
- else
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE2);
-
- clock = DoubleClock (baudrate); /* Set baud above */
-
- fraction = ((clock - (int) clock) * 16.0) + 0.5;
-
- uartp[MCFUART_UBG1] = (((int) clock >> 8) & 0xff); /* set msb baud */
- uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */
- uartp[MCFUART_UFPD] = ((int) fraction & 0xf); /* set baud fraction adjust */
-#endif
-}
-
-void rs_serial_init (int port, int baudrate)
-{
- volatile unsigned char *uartp;
- double clock, fraction;
-
- /*
- * Reset UART, get it into known state...
- */
- if (port == 0)
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE1);
- else
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE2);
-
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
-
- /*
- * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
- */
- uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
- uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
- rs_serial_setbaudrate (port, baudrate);
-
- uartp[MCFUART_UCSR] =
- MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
- return;
-}
-
-
-/****************************************************************************/
-
-/*
- * Output a single character, using UART polled mode.
- * This is used for console output.
- */
-
-void rs_put_char (char ch)
-{
- volatile unsigned char *uartp;
- int i;
-
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE1);
-
- for (i = 0; (i < 0x10000); i++) {
- if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
- break;
- }
- uartp[MCFUART_UTB] = ch;
- return;
-}
-
-int rs_is_char (void)
-{
- volatile unsigned char *uartp;
-
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE1);
- return ((uartp[MCFUART_USR] & MCFUART_USR_RXREADY) ? 1 : 0);
-}
-
-int rs_get_char (void)
-{
- volatile unsigned char *uartp;
-
- uartp = (volatile unsigned char *) (MCF_MBAR + MCFUART_BASE1);
- return (uartp[MCFUART_URB]);
-}
-
-void serial_setbrg (void)
-{
- DECLARE_GLOBAL_DATA_PTR;
- rs_serial_setbaudrate (0, gd->bd->bi_baudrate);
-}
-
-int serial_init (void)
-{
- DECLARE_GLOBAL_DATA_PTR;
- rs_serial_init (0, gd->bd->bi_baudrate);
- return 0;
-}
-
-
-void serial_putc (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
- rs_put_char (c);
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- while (!rs_is_char ());
- return rs_get_char ();
-}
-
-int serial_tstc ()
-{
- return rs_is_char ();
-}
diff --git a/cpu/coldfire/start.S b/cpu/coldfire/start.S
deleted file mode 100644
index 4454223..0000000
--- a/cpu/coldfire/start.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000-2003 Wolfgang Denk <wd@denx.de>
- * Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include "version.h"
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#define MCF_MBAR 0x10000000
-#define MEM_BUILTIN_ADDR 0x20000000
-#define MEM_BUILTIN_SIZE 0x1000
-#define DRAM_ADDR 0x0
-#define DRAM_SIZE 0x400000
-
- .text
-
- .globl _start
-_start:
- nop
- nop
- move.w #0x2700,%sr
-
- move.l #0, %d0
- movec %d0, %VBR
-
-#ifdef CONFIG_M5272
- move.l #(MCF_MBAR+1), %d0
- move.c %d0, %MBAR
-
- move.l #(MEM_BUILTIN_ADDR+1), %d0
- movec %d0, %RAMBAR0
-
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
-#endif
-
- move.l #_sbss,%a0
- move.l #_ebss,%d0
-1:
- clr.l (%a0)+
- cmp.l %a0,%d0
- bne.s 1b
-
-/* move.l #MEM_BUILTIN_ADDR+MEM_BUILTIN_SIZE, %sp */
- move.l #DRAM_ADDR+DRAM_SIZE, %sp
- clr.l %sp@-
-
- jsr board_init_f
-
- .globl exception_handler
-exception_handler:
- move.w #0x2700,%sr
- lea %sp@(-60),%sp
- movem.l %d0-%d7/%a0-%a6,%sp@
- jsr do_exception
- movem.l %sp@,%d0-%d7/%a0-%a6
- lea %sp@(60),%sp
- rte
-
- .globl buserror_handler
-buserror_handler:
- move.w #0x2700,%sr
- lea %sp@(-60),%sp
- movem.l %d0-%d7/%a0-%a6,%sp@
- jsr do_buserror
- movem.l %sp@,%d0-%d7/%a0-%a6
- lea %sp@(60),%sp
- rte
-
- .globl addresserror_handler
-addresserror_handler:
- move.w #0x2700,%sr
- lea %sp@(-60),%sp
- movem.l %d0-%d7/%a0-%a6,%sp@
- jsr do_buserror
- movem.l %sp@,%d0-%d7/%a0-%a6
- lea %sp@(60),%sp
- rte
-
- .globl get_endaddr
-get_endaddr:
- movel #_end,%d0
- rts
-
-#ifdef CONFIG_M5272
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- moveq #1, %d0
- move.l %d0, icache_state
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #0x00000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- movec %d0, %ACR1 /* Enable cache */
- moveq #0, %d0
- move.l %d0, icache_state
- rts
-#endif
-
-#ifdef CONFIG_M5282
- .globl icache_enable
-icache_enable:
- rts
-
- .globl icache_disable
-icache_disable:
- rts
-#endif
-
- .globl icache_status
-icache_status:
- move.l icache_state, %d0
- rts
-
- .data
-icache_state:
- .long 1
-
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", __DATE__, " - ", __TIME__, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
diff --git a/cpu/coldfire/Makefile b/cpu/mcf52x2/Makefile
similarity index 90%
rename from cpu/coldfire/Makefile
rename to cpu/mcf52x2/Makefile
index 3976f56..879deb7 100644
--- a/cpu/coldfire/Makefile
+++ b/cpu/mcf52x2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -28,12 +28,12 @@
LIB = lib$(CPU).a
START =
-OBJS = kgdb.o serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
+OBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
all: .depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS) kgdb.o
+ $(AR) crv $@ $(OBJS)
#########################################################################
diff --git a/cpu/coldfire/config.mk b/cpu/mcf52x2/config.mk
similarity index 83%
rename from cpu/coldfire/config.mk
rename to cpu/mcf52x2/config.mk
index 72b33ce..650db85 100644
--- a/cpu/coldfire/config.mk
+++ b/cpu/mcf52x2/config.mk
@@ -1,5 +1,7 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+#
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,6 +23,5 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS +=
-
-PLATFORM_CPPFLAGS += -m5200
+PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+PLATFORM_CPPFLAGS += -m5307
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
new file mode 100644
index 0000000..b012222
--- /dev/null
+++ b/cpu/mcf52x2/cpu.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2003
+ * Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+#ifdef CONFIG_M5272
+#include <asm/immap_5272.h>
+#include <asm/m5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+
+#endif
+
+
+#ifdef CONFIG_M5272
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
+ volatile wdog_t * wdp = (wdog_t *)(CFG_MBAR + MCFSIM_WRRR);
+
+ wdp->wdog_wrrr = 0;
+ udelay (1000);
+
+ /* enable watchdog, set timeout to 0 and wait */
+ wdp->wdog_wrrr = 1;
+ while (1);
+
+ /* we don't return! */
+ return 0;
+};
+
+int checkcpu(void) {
+ ulong *dirp = (ulong *)(CFG_MBAR + MCFSIM_DIR);
+ uchar msk;
+ char *suf;
+
+ puts ("CPU: ");
+ msk = (*dirp > 28) & 0xf;
+ switch (msk) {
+ case 0x2: suf = "1K75N"; break;
+ case 0x4: suf = "3K75N"; break;
+ default:
+ suf = NULL;
+ printf ("MOTOROLA MCF5272 (Mask:%01x)\n", msk);
+ break;
+ }
+
+ if (suf)
+ printf ("MOTOROLA MCF5272 %s\n", suf);
+ return 0;
+};
+
+
+#if defined(CONFIG_WATCHDOG)
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset (void)
+{
+ volatile immap_t * regp = (volatile immap_t *)CFG_MBAR;
+ regp->wdog_reg.wdog_wcr = 0;
+}
+
+int watchdog_disable (void)
+{
+ volatile immap_t *regp = (volatile immap_t *)CFG_MBAR;
+
+ regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */
+ regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */
+ regp->wdog_reg.wdog_wrrr = 0; /* disable watchdog timer */
+
+ puts ("WATCHDOG:disabled\n");
+ return (0);
+}
+
+int watchdog_init (void)
+{
+ volatile immap_t *regp = (volatile immap_t *)CFG_MBAR;
+
+ regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */
+
+ /* set timeout and enable watchdog */
+ regp->wdog_reg.wdog_wrrr = ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1;
+ regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */
+
+ puts ("WATCHDOG:enabled\n");
+ return (0);
+}
+#endif /* #ifdef CONFIG_WATCHDOG */
+
+#endif /* #ifdef CONFIG_M5272 */
+
+
+#ifdef CONFIG_M5282
+int checkcpu (void)
+{
+ puts ("CPU: MOTOROLA Coldfire MCF5282\n");
+ return 0;
+}
+
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
+ return 0;
+};
+#endif
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
new file mode 100644
index 0000000..8aff8f1
--- /dev/null
+++ b/cpu/mcf52x2/cpu_init.c
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2003
+ * Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#ifdef CONFIG_M5272
+#include <asm/m5272.h>
+#include <asm/immap_5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+#include <asm/m5282.h>
+#include <asm/immap_5282.h>
+#endif
+
+#ifdef CONFIG_M5272
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (void)
+{
+ /* if we come from RAM we assume the CPU is
+ * already initialized.
+ */
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+ volatile immap_t *regp = (immap_t *)CFG_MBAR;
+
+ volatile unsigned char *mbar;
+ mbar = (volatile unsigned char *) CFG_MBAR;
+
+ regp->sysctrl_reg.sc_scr = CFG_SCR;
+ regp->sysctrl_reg.sc_spr = CFG_SPR;
+
+ /* Setup Ports: */
+ regp->gpio_reg.gpio_pacnt = CFG_PACNT;
+ regp->gpio_reg.gpio_paddr = CFG_PADDR;
+ regp->gpio_reg.gpio_padat = CFG_PADAT;
+ regp->gpio_reg.gpio_pbcnt = CFG_PBCNT;
+ regp->gpio_reg.gpio_pbddr = CFG_PBDDR;
+ regp->gpio_reg.gpio_pbdat = CFG_PBDAT;
+ regp->gpio_reg.gpio_pdcnt = CFG_PDCNT;
+
+ /* Memory Controller: */
+ regp->csctrl_reg.cs_br0 = CFG_BR0_PRELIM;
+ regp->csctrl_reg.cs_or0 = CFG_OR0_PRELIM;
+
+#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
+ regp->csctrl_reg.cs_br1 = CFG_BR1_PRELIM;
+ regp->csctrl_reg.cs_or1 = CFG_OR1_PRELIM;
+#endif
+
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+ regp->csctrl_reg.cs_br2 = CFG_BR2_PRELIM;
+ regp->csctrl_reg.cs_or2 = CFG_OR2_PRELIM;
+#endif
+
+#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
+ regp->csctrl_reg.cs_br3 = CFG_BR3_PRELIM;
+ regp->csctrl_reg.cs_or3 = CFG_OR3_PRELIM;
+#endif
+
+#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM)
+ regp->csctrl_reg.cs_br4 = CFG_BR4_PRELIM;
+ regp->csctrl_reg.cs_or4 = CFG_OR4_PRELIM;
+#endif
+
+#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM)
+ regp->csctrl_reg.cs_br5 = CFG_BR5_PRELIM;
+ regp->csctrl_reg.cs_or5 = CFG_OR5_PRELIM;
+#endif
+
+#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM)
+ regp->csctrl_reg.cs_br6 = CFG_BR6_PRELIM;
+ regp->csctrl_reg.cs_or6 = CFG_OR6_PRELIM;
+#endif
+
+#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM)
+ regp->csctrl_reg.cs_br7 = CFG_BR7_PRELIM;
+ regp->csctrl_reg.cs_or7 = CFG_OR7_PRELIM;
+#endif
+
+#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
+
+ /* enable instruction cache now */
+ icache_enable();
+
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+ return (0);
+}
+#endif /* #ifdef CONFIG_M5272 */
+
+
+#ifdef CONFIG_M5282
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (void)
+{
+
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+ return (0);
+}
+#endif
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
new file mode 100644
index 0000000..623a01d
--- /dev/null
+++ b/cpu/mcf52x2/fec.c
@@ -0,0 +1,558 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/fec.h>
+
+#ifdef CONFIG_M5272
+#include <asm/m5272.h>
+#include <asm/immap_5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+#include <asm/m5282.h>
+#include <asm/immap_5282.h>
+#endif
+
+#include <net.h>
+#include <command.h>
+
+#ifdef CONFIG_M5272
+#define FEC_ADDR (CFG_MBAR + 0x840)
+#endif
+#ifdef CONFIG_M5282
+#define FEC_ADDR (CFG_MBAR + 0x1000)
+#endif
+
+#undef ET_DEBUG
+#undef MII_DEBUG
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+
+#ifdef CFG_DISCOVER_PHY
+#include <miiphy.h>
+static void mii_discover_phy (void);
+#endif
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx = NULL;
+
+int eth_send (volatile void *packet, int length)
+{
+ int j, rc;
+ volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
+
+ /* section 16.9.23.3
+ * Wait for ready
+ */
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
+ && (j < TOUT_LOOP)) {
+ udelay (1);
+ j++;
+ }
+ if (j >= TOUT_LOOP) {
+ printf ("TX not ready\n");
+ }
+
+ rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
+
+ /* Activate transmit Buffer Descriptor polling */
+ fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
+
+ j = 0;
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
+ && (j < TOUT_LOOP)) {
+ udelay (1);
+ j++;
+ }
+ if (j >= TOUT_LOOP) {
+ printf ("TX timeout\n");
+ }
+#ifdef ET_DEBUG
+ printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
+ __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc,
+ (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2);
+#endif
+
+ /* return only status bits */ ;
+ rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
+
+ txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+ return rc;
+}
+
+int eth_rx (void)
+{
+ int length;
+ volatile fec_t *fecp = (fec_t *) FEC_ADDR;
+
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
+
+ length = rtx->rxbd[rxIdx].cbd_datlen;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+ printf ("%s[%d] err: %x\n",
+ __FUNCTION__, __LINE__,
+ rtx->rxbd[rxIdx].cbd_sc);
+#endif
+ } else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[rxIdx], length - 4);
+ }
+
+ /* Give the buffer back to the FEC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+ /* Try to fill Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+ }
+
+ return length;
+}
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+#define FEC_RESET_DELAY 50000
+
+int eth_init (bd_t * bd)
+{
+
+ int i;
+ volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf ("FEC_RESET_DELAY timeout\n");
+ return 0;
+ }
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt */
+ fecp->fec_ievent = 0xffffffff;
+
+ /* Set station address */
+#define ea bd->bi_enetaddr
+ fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
+ (ea[2] << 8) | (ea[3]);
+ fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16);
+#ifdef ET_DEBUG
+ printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]);
+#endif
+#undef ea
+
+ /* Clear multicast address hash table
+ */
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+
+ /* Set maximum receive buffer size.
+ */
+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+
+ /*
+ * Setup Buffers and Buffer Desriptors
+ */
+ rxIdx = 0;
+ txIdx = 0;
+
+ if (!rtx) {
+ rtx = (RTXBD *) CFG_ENET_BD_BASE;
+ }
+
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Last, Tx CRC
+ */
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /* Set receive and transmit descriptor base
+ */
+ fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
+ fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
+
+ /* Enable MII mode
+ */
+#if 0 /* Full duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
+ fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
+#else /* Half duplex mode */
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl = 0;
+#endif
+ /* Set MII speed */
+ fecp->fec_mii_speed = 0x0e;
+
+ /* Configure port B for MII.
+ */
+ /* port initialization was already made in cpu_init_f() */
+
+ /* Now enable the transmit and receive processing
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
+
+#ifdef CFG_DISCOVER_PHY
+ /* wait for the PHY to wake up after reset */
+ mii_discover_phy ();
+#endif
+
+ /* And last, try to fill Rx Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+
+ return 1;
+}
+
+void eth_halt (void)
+{
+ volatile fec_t *fecp = (fec_t *) FEC_ADDR;
+
+ fecp->fec_ecntrl = 0;
+}
+
+
+#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
+
+static int phyaddr = -1; /* didn't find a PHY yet */
+static uint phytype;
+
+/* Make MII read/write commands for the FEC.
+*/
+
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
+ (REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
+
+/* PHY identification
+ */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+
+/* send command to phy using mii, wait for result */
+static uint mii_send (uint mii_cmd)
+{
+ uint mii_reply;
+ volatile fec_t *ep = (fec_t *) (FEC_ADDR);
+
+ ep->fec_mii_data = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */
+ mii_reply = ep->fec_mii_data; /* result from phy */
+ ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+static void mii_discover_phy (void)
+{
+#define MAX_PHY_PASSES 11
+ uint phyno;
+ int pass;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay (10000); /* wait 10ms */
+ }
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+ phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf ("PHY type 0x%x pass %d type ", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |= mii_send (mk_mii_read (phyno,
+ PHY_PHYIDR2));
+
+#ifdef ET_DEBUG
+ printf ("PHY @ 0x%x pass %d type ", phyno,
+ pass);
+ switch (phytype & 0xfffffff0) {
+ case PHY_ID_LXT970:
+ printf ("LXT970\n");
+ break;
+ case PHY_ID_LXT971:
+ printf ("LXT971\n");
+ break;
+ case PHY_ID_82555:
+ printf ("82555\n");
+ break;
+ case PHY_ID_QS6612:
+ printf ("QS6612\n");
+ break;
+ case PHY_ID_AMD79C784:
+ printf ("AMD79C784\n");
+ break;
+ case PHY_ID_LSI80225B:
+ printf ("LSI L80225/B\n");
+ break;
+ default:
+ printf ("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0) {
+ printf ("No PHY device found.\n");
+ }
+}
+#endif /* CFG_DISCOVER_PHY */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
+
+static int mii_init_done = 0;
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_init (void)
+{
+ volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
+
+ int i;
+
+ if (mii_init_done != 0) {
+ return;
+ }
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ fecp->fec_ecntrl = FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf ("FEC_RESET_DELAY timeout\n");
+ return;
+ }
+
+ /* We use strictly polling mode only
+ */
+ fecp->fec_imask = 0;
+
+ /* Clear any pending interrupt
+ */
+ fecp->fec_ievent = 0xffffffff;
+
+ /* Set MII speed */
+ fecp->fec_mii_speed = 0x0e;
+
+ /* Configure port B for MII.
+ */
+ /* port initialization was already made in cpu_init_f() */
+
+ /* Now enable the transmit and receive processing */
+ fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
+
+ mii_init_done = 1;
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send (mk_mii_read (addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send (mk_mii_write (addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf ("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII) */
+
+#endif /* CFG_CMD_NET, FEC_ENET */
diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c
new file mode 100644
index 0000000..fa181d9
--- /dev/null
+++ b/cpu/mcf52x2/interrupts.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_M5272
+#include <asm/m5272.h>
+#include <asm/immap_5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+#include <asm/m5282.h>
+#include <asm/immap_5282.h>
+#endif
+
+
+#define NR_IRQS 31
+
+/*
+ * Interrupt vector functions.
+ */
+struct interrupt_action {
+ interrupt_handler_t *handler;
+ void *arg;
+}
+
+static struct interrupt_action irq_vecs[NR_IRQS];
+
+static __inline__ unsigned short get_sr (void)
+{
+ unsigned short sr;
+
+ asm volatile ("move.w %%sr,%0":"=r" (sr):);
+
+ return sr;
+}
+
+static __inline__ void set_sr (unsigned short sr)
+{
+ asm volatile ("move.w %0,%%sr"::"r" (sr));
+}
+
+/************************************************************************/
+/*
+ * Install and free an interrupt handler
+ */
+void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
+{
+#ifdef CONFIG_M5272
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
+#endif
+ int vec_base = 0;
+
+#ifdef CONFIG_M5272
+ vec_base = intp->int_pivr & 0xe0;
+#endif
+
+ if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) {
+ printf ("irq_install_handler: wrong interrupt vector %d\n",
+ vec);
+ return;
+ }
+
+ irq_vecs[vec - vec_base].handler = handler;
+ irq_vecs[vec - vec_base].arg = arg;
+}
+
+void irq_free_handler (int vec)
+{
+#ifdef CONFIG_M5272
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
+#endif
+ int vec_base = 0;
+
+#ifdef CONFIG_M5272
+ vec_base = intp->int_pivr & 0xe0;
+#endif
+
+ if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) {
+ return;
+ }
+
+ irq_vecs[vec - vec_base].handler = NULL;
+ irq_vecs[vec - vec_base].arg = NULL;
+}
+
+void enable_interrupts (void)
+{
+ unsigned short sr;
+
+ sr = get_sr ();
+ set_sr (sr & ~0x0700);
+}
+
+int disable_interrupts (void)
+{
+ unsigned short sr;
+
+ sr = get_sr ();
+ set_sr (sr | 0x0700);
+
+ return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */
+}
+
+void int_handler (struct pt_regs *fp)
+{
+#ifdef CONFIG_M5272
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
+#endif
+ int vec, vec_base = 0;
+
+ vec = (fp->vector >> 2) & 0xff;
+#ifdef CONFIG_M5272
+ vec_base = intp->int_pivr & 0xe0;
+#endif
+
+ if (irq_vecs[vec - vec_base].handler != NULL) {
+ irq_vecs[vec -
+ vec_base].handler (irq_vecs[vec - vec_base].arg);
+ } else {
+ printf ("\nBogus External Interrupt Vector %ld\n", vec);
+ }
+}
+
+#ifdef CONFIG_M5272
+int interrupt_init (void)
+{
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
+
+ /* disable all external interrupts */
+ intp->int_icr1 = 0x88888888;
+ intp->int_icr2 = 0x88888888;
+ intp->int_icr3 = 0x88888888;
+ intp->int_icr4 = 0x88888888;
+ intp->int_pitr = 0x00000000;
+ /* initialize vector register */
+ intp->int_pivr = 0x40;
+
+ enable_interrupts ();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_M5282
+int interrupt_init (void)
+{
+ return 0;
+}
+#endif
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
new file mode 100644
index 0000000..fbbd14d
--- /dev/null
+++ b/cpu/mcf52x2/serial.c
@@ -0,0 +1,159 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+#include <asm/mcfuart.h>
+
+#ifdef CONFIG_M5272
+#include <asm/m5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+#include <asm/m5282.h>
+#endif
+
+#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a))
+
+void rs_serial_setbaudrate(int port,int baudrate)
+{
+#ifdef CONFIG_M5272
+ volatile unsigned char *uartp;
+ double clock, fraction;
+
+ if (port == 0)
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ else
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+
+ clock = DoubleClock(baudrate); /* Set baud above */
+
+ fraction = ((clock - (int)clock) * 16.0) + 0.5;
+
+ uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
+ uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
+ uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
+#endif
+};
+
+void rs_serial_init(int port,int baudrate)
+{
+ volatile unsigned char *uartp;
+
+ /*
+ * Reset UART, get it into known state...
+ */
+ if (port == 0)
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ else
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
+
+ /*
+ * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
+ */
+ uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
+ uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
+
+ rs_serial_setbaudrate(port,baudrate);
+
+ uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
+ uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
+
+ return;
+}
+
+/****************************************************************************/
+/*
+ * Output a single character, using UART polled mode.
+ * This is used for console output.
+ */
+
+void rs_put_char(char ch)
+{
+ volatile unsigned char *uartp;
+ int i;
+
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+
+ for (i = 0; (i < 0x10000); i++) {
+ if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
+ break;
+ }
+ uartp[MCFUART_UTB] = ch;
+ return;
+}
+
+int rs_is_char(void)
+{
+ volatile unsigned char *uartp;
+
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ return((uartp[MCFUART_USR] & MCFUART_USR_RXREADY) ? 1 : 0);
+}
+
+int rs_get_char(void)
+{
+ volatile unsigned char *uartp;
+
+ uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+ return(uartp[MCFUART_URB]);
+}
+
+void serial_setbrg(void) {
+ DECLARE_GLOBAL_DATA_PTR;
+ rs_serial_setbaudrate(0,gd->bd->bi_baudrate);
+}
+
+int serial_init(void) {
+ DECLARE_GLOBAL_DATA_PTR;
+ rs_serial_init(0,gd->baudrate);
+ return 0;
+}
+
+
+void serial_putc(const char c) {
+ if (c == '\n')
+ serial_putc ('\r');
+ rs_put_char(c);
+}
+
+void serial_puts (const char *s) {
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+int serial_getc(void) {
+ while(!rs_is_char());
+ return rs_get_char();
+}
+
+int serial_tstc() {
+ return rs_is_char();
+}
diff --git a/cpu/coldfire/speed.c b/cpu/mcf52x2/speed.c
similarity index 77%
copy from cpu/coldfire/speed.c
copy to cpu/mcf52x2/speed.c
index 0fe0925..8d5c92f 100644
--- a/cpu/coldfire/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -1,6 +1,6 @@
/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2003
+ * Josef Baumgartner <josef.baumgartner@telex.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -24,12 +24,14 @@
#include <common.h>
#include <asm/processor.h>
-ulong get_gclk_freq (void)
+/*
+ * get_clocks() fills in gd->cpu_clock and gd->bus_clk
+ */
+int get_clocks (void)
{
- return 0;
-}
+ DECLARE_GLOBAL_DATA_PTR;
-ulong get_bus_freq (ulong gclk_freq)
-{
- return 0;
+ gd->cpu_clk = CFG_CLK;
+ gd->bus_clk = gd->cpu_clk;
+ return (0);
}
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
new file mode 100644
index 0000000..cf1b97d
--- /dev/null
+++ b/cpu/mcf52x2/start.S
@@ -0,0 +1,316 @@
+/*
+ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "version.h"
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+
+#define _START _start
+#define _FAULT _fault
+
+
+#define SAVE_ALL \
+ move.w #0x2700,%sr; /* disable intrs */ \
+ subl #60,%sp; /* space for 15 regs */ \
+ moveml %d0-%d7/%a0-%a6,%sp@; \
+
+#define RESTORE_ALL \
+ moveml %sp@,%d0-%d7/%a0-%a6; \
+ addl #60,%sp; /* space for 15 regs */ \
+ rte
+
+/* If we come from a pre-loader we don't need an initial exception
+ * table.
+ */
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+
+.text
+/*
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
+ */
+_vectors:
+
+.long 0x00000000, _START
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+#endif
+
+ .text
+
+ .globl _start
+_start:
+ nop
+ nop
+ move.w #0x2700,%sr
+
+ /* if we come from a pre-loader we have no exception table and
+ * therefore no VBR to set
+ */
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+ move.l #CFG_FLASH_BASE, %d0
+ movec %d0, %VBR
+#endif
+
+#ifdef CONFIG_M5272
+ move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */
+ move.c %d0, %MBAR
+
+ move.l #(CFG_INIT_RAM_ADDR + 1), %d0
+ movec %d0, %RAMBAR0
+#endif
+
+#ifdef CONFIG_M5282
+ /* Initialize IPSBAR */
+ move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
+ move.l %d0, 0x40000000
+
+ /* Initialize FLASHBAR: locate internal Flash and validate it */
+ move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
+ movec %d0, %RAMBAR0
+
+ /* Initialize RAMBAR1: locate SRAM and validate it */
+ move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
+ movec %d0, %RAMBAR1
+#endif
+
+ /* invalidate and disable cache */
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ /* set stackpointer to end of internal ram to get some stackspace for the first c-code */
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+
+ move.l #__got_start, %a5 /* put relocation table address to a5 */
+
+ bsr cpu_init_f /* run low-level CPU init code (from flash) */
+ bsr board_init_f /* run low-level board init code (from flash) */
+
+ /* board_init_f() does not return
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ link.w %a6,#0
+ move.l 8(%a6), %sp /* set new stack pointer */
+
+ move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
+ move.l 16(%a6), %a0 /* Save copy of Destination Address */
+
+ move.l #CFG_MONITOR_BASE, %a1
+ move.l #__init_end, %a2
+ move.l %a0, %a3
+
+ /* copy the code to RAM */
+1:
+ move.l (%a1)+, (%a3)+
+ cmp.l %a1,%a2
+ bgt.s 1b
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ move.l %a0, %a1
+ add.l #(in_ram - CFG_MONITOR_BASE), %a1
+ jmp (%a1)
+
+in_ram:
+
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ move.l %a0, %a1
+ add.l #(_sbss - CFG_MONITOR_BASE),%a1
+ move.l %a0, %d1
+ add.l #(_ebss - CFG_MONITOR_BASE),%d1
+6:
+ clr.l (%a1)+
+ cmp.l %a1,%d1
+ bgt.s 6b
+
+ /*
+ * fix got table in RAM
+ */
+ move.l %a0, %a1
+ add.l #(__got_start - CFG_MONITOR_BASE),%a1
+ move.l %a1,%a5 /* * fix got pointer register a5 */
+
+ move.l %a0, %a2
+ add.l #(__got_end - CFG_MONITOR_BASE),%a2
+
+7:
+ move.l (%a1),%d1
+ sub.l #_start,%d1
+ add.l %a0,%d1
+ move.l %d1,(%a1)+
+ cmp.l %a2, %a1
+ bne 7b
+
+ /* calculate relative jump to board_init_r in ram */
+ move.l %a0, %a1
+ add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+
+ /* set parameters for board_init_r */
+ move.l %a0,-(%sp) /* dest_addr */
+ move.l %d0,-(%sp) /* gd */
+ jsr (%a1)
+
+/*------------------------------------------------------------------------------*/
+/* exception code */
+ .globl _fault
+_fault:
+ jmp _fault
+
+ .globl _exc_handler
+_exc_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr exc_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+ .globl _int_handler
+_int_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr int_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+/*------------------------------------------------------------------------------*/
+/* cache functions */
+#ifdef CONFIG_M5272
+ .globl icache_enable
+icache_enable:
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0x0000c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #0xff00c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR1 /* Enable cache */
+ move.l #0x80000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ moveq #1, %d0
+ move.l %d0, icache_state
+ rts
+#endif
+
+#ifdef CONFIG_M5282
+ .globl icache_enable
+icache_enable:
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0x0000c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #0xff00c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR1 /* Enable cache */
+ move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/
+ movec %d0, %CACR /* Enable cache */
+ moveq #1, %d0
+ move.l %d0, icache_state
+ rts
+#endif
+
+ .globl icache_disable
+icache_disable:
+ move.l #0x00000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ clr.l %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ movec %d0, %ACR1 /* Enable cache */
+ moveq #0, %d0
+ move.l %d0, icache_state
+ rts
+
+ .globl icache_status
+icache_status:
+ move.l icache_state, %d0
+ rts
+
+ .data
+icache_state:
+ .long 1
+
+/*------------------------------------------------------------------------------*/
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
diff --git a/doc/README.m68k b/doc/README.m68k
new file mode 100644
index 0000000..9385f44
--- /dev/null
+++ b/doc/README.m68k
@@ -0,0 +1,133 @@
+
+U-Boot for Motorola M68K
+
+Last Update: January 12, 2004
+====================================================================
+
+This file contains status information for the port of U-Boot to the
+Motorola M68K series of CPUs.
+
+1. OVERVIEW
+-----------
+Bernhard Kuhn ported U-Boot 0.4.0 to the Motorola Coldfire
+architecture. The patches of Bernhard support the MCF5272 and
+MCF5282. A great disadvantage of these patches was that they needed
+a pre-bootloader to start u-boot. Because of this, a new port was
+created which no longer needs a first stage booter.
+
+Although this port is intended to cover all M68k processors, only
+the parts for the Motorola Coldfire MCF5272 and MCF5282 are
+implemented at the moment. Additional CPUs and boards will be
+hopefully added soon!
+
+
+2. SUPPORTED CPUs
+-----------------
+
+2.1 Motorola Coldfire MCF5272
+-----------------------------
+CPU specific code is located in: cpu/mcf52x2
+
+
+2.1 Motorola Coldfire MCF5282
+-----------------------------
+CPU specific code is located in: cpu/mcf52x2
+
+At the moment the code isn't fully implemented and still needs a pre-loader!
+The preloader must initialize the processor and then start u-boot. The board
+must be configured for a pre-loader (see 4.1)
+
+U-boot is configured to run at 0x20000 at default. This can be configured by
+change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
+include/configs/M5282EVB.h.
+
+
+3. SUPPORTED BOARDs
+-------------------
+
+3.1 Motorola M5272C3 EVB
+------------------------
+Board specific code is located in: board/m5272c3
+
+To configure the board, type: make M5272C3_config
+
+U-Boot Memory Map:
+------------------
+0xffe00000 - 0xffe3ffff u-boot
+0xffe04000 - 0xffe05fff environment (embedded in u-boot!)
+0xffe40000 - 0xffffffff free for linux/applications
+
+
+3.2 Motorola M5282 EVB
+------------------------
+Board specific code is located in: board/m5282evb
+
+To configure the board, type: make M5272C3_config
+
+
+4. CONFIGURATION OPTIONS/SETTINGS
+----------------------------------
+
+4.1 Configuration to use a pre-loader
+-------------------------------------
+If u-boot should be loaded to RAM and started by a pre-loader
+CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
+initial vector table and basic processor initialization will not
+be compiled in. The start address of u-boot must be adjusted in
+the boards config header file (CFG_MONITOR_BASE) and Makefile
+(TEXT_BASE) to the load address.
+
+
+4.1 MCF5272 specific Options/Settings
+-------------------------------------
+
+CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs
+CONFIG_M5272 -- defined for all Motorola MCF5272 CPUs
+
+CONFIG_MONITOR_IS_IN_RAM
+ -- defined if u-boot is loaded by a pre-loader
+
+CFG_MBAR -- defines the base address of the MCF5272 configuration registers
+CFG_INIT_RAM_ADDR
+ -- defines the base address of the MCF5272 internal SRAM
+CFG_ENET_BD_BASE
+ -- defines the base addres of the FEC buffer descriptors
+
+CFG_SCR -- defines the contents of the System Configuration Register
+CFG_SPR -- defines the contents of the System Protection Register
+CFG_BRx_PRELIM -- defines the contents of the Chip Select Base Registers
+CFG_ORx_PRELIM -- defines the contents of the Chip Select Option Registers
+
+CFG_PxDDR -- defines the contents of the Data Direction Registers
+CFG_PxDAT -- defines the contents of the Data Registers
+CFG_PXCNT -- defines the contents of the Port Configuration Registers
+
+
+4.2 MCF5282 specific Options/Settings
+-------------------------------------
+
+CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs
+CONFIG_M5282 -- defined for all Motorola MCF5282 CPUs
+
+CONFIG_MONITOR_IS_IN_RAM
+ -- defined if u-boot is loaded by a pre-loader
+
+CFG_MBAR -- defines the base address of the MCF5282 internal register space
+CFG_INIT_RAM_ADDR
+ -- defines the base address of the MCF5282 internal SRAM
+CFG_INT_FLASH_BASE
+ -- defines the base address of the MCF5282 internal Flash memory
+CFG_ENET_BD_BASE
+ -- defines the base addres of the FEC buffer descriptors
+
+
+5. COMPILER
+-----------
+To create U-Boot the gcc-2.95.3 compiler set (m68k-elf-20030314) from uClinux.org was used.
+You can download it from: http://www.uclinux.org/pub/uClinux/m68k-elf-tools/
+
+
+Regards,
+
+Josef
+<josef.baumgartner@telex.de>
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index c4d7bff..c6c2751 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -1,11 +1,15 @@
/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2004
* Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
*
* Copyright (C) 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Modified to work with AMD flashes
*
+ * Copyright (C) 2004
+ * Ed Okerson
+ * Modified to work with little-endian systems.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,18 +30,22 @@
*
* History
* 01/20/2004 - combined variants of original driver.
+ * 01/22/2004 - Write performance enhancements for parallel chips (Tolunay)
+ * 01/23/2004 - Support for x8/x16 chips (Rune Raknerud)
+ * 01/27/2004 - Little endian support Ed Okerson
*
* Tested Architectures
- * Port Width Chip Width # of banks Flash Chip Board
- * 32 16 1 23F128J3 seranoa/eagle
+ * Port Width Chip Width # of banks Flash Chip Board
+ * 32 16 1 23F128J3 seranoa/eagle
+ * 64 16 1 23F128J3 seranoa/falcon
*
*/
/* The DEBUG define must be before common to enable debugging */
-#undef DEBUG
+#undef DEBUG
#include <common.h>
#include <asm/processor.h>
-#ifdef CFG_FLASH_CFI_DRIVER
+#ifdef CFG_FLASH_CFI_DRIVER
/*
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
* The width of the port and the width of the chips are determined at initialization.
@@ -59,6 +67,10 @@
* Verify erase and program timeouts.
*/
+#ifndef CFG_FLASH_BANKS_LIST
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#endif
+
#define FLASH_CMD_CFI 0x98
#define FLASH_CMD_READ_ID 0x90
#define FLASH_CMD_RESET 0xff
@@ -69,8 +81,8 @@
#define FLASH_CMD_PROTECT_SET 0x01
#define FLASH_CMD_PROTECT_CLEAR 0xD0
#define FLASH_CMD_CLEAR_STATUS 0x50
-#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
+#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
#define FLASH_STATUS_DONE 0x80
#define FLASH_STATUS_ESS 0x40
@@ -92,35 +104,35 @@
#define FLASH_OFFSET_CFI 0x55
#define FLASH_OFFSET_CFI_RESP 0x10
-#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
+#define FLASH_OFFSET_PRIMARY_VENDOR 0x13
#define FLASH_OFFSET_WTOUT 0x1F
-#define FLASH_OFFSET_WBTOUT 0x20
+#define FLASH_OFFSET_WBTOUT 0x20
#define FLASH_OFFSET_ETOUT 0x21
-#define FLASH_OFFSET_CETOUT 0x22
+#define FLASH_OFFSET_CETOUT 0x22
#define FLASH_OFFSET_WMAX_TOUT 0x23
-#define FLASH_OFFSET_WBMAX_TOUT 0x24
+#define FLASH_OFFSET_WBMAX_TOUT 0x24
#define FLASH_OFFSET_EMAX_TOUT 0x25
-#define FLASH_OFFSET_CEMAX_TOUT 0x26
+#define FLASH_OFFSET_CEMAX_TOUT 0x26
#define FLASH_OFFSET_SIZE 0x27
-#define FLASH_OFFSET_INTERFACE 0x28
-#define FLASH_OFFSET_BUFFER_SIZE 0x2A
+#define FLASH_OFFSET_INTERFACE 0x28
+#define FLASH_OFFSET_BUFFER_SIZE 0x2A
#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
#define FLASH_OFFSET_ERASE_REGIONS 0x2D
#define FLASH_OFFSET_PROTECT 0x02
-#define FLASH_OFFSET_USER_PROTECTION 0x85
-#define FLASH_OFFSET_INTEL_PROTECTION 0x81
+#define FLASH_OFFSET_USER_PROTECTION 0x85
+#define FLASH_OFFSET_INTEL_PROTECTION 0x81
#define FLASH_MAN_CFI 0x01000000
-#define CFI_CMDSET_NONE 0
+#define CFI_CMDSET_NONE 0
#define CFI_CMDSET_INTEL_EXTENDED 1
-#define CFI_CMDSET_AMD_STANDARD 2
+#define CFI_CMDSET_AMD_STANDARD 2
#define CFI_CMDSET_INTEL_STANDARD 3
-#define CFI_CMDSET_AMD_EXTENDED 4
+#define CFI_CMDSET_AMD_EXTENDED 4
#define CFI_CMDSET_MITSU_STANDARD 256
#define CFI_CMDSET_MITSU_EXTENDED 257
-#define CFI_CMDSET_SST 258
+#define CFI_CMDSET_SST 258
typedef union {
@@ -131,9 +143,9 @@
} cfiword_t;
typedef union {
- volatile unsigned char *cp;
+ volatile unsigned char *cp;
volatile unsigned short *wp;
- volatile unsigned long *lp;
+ volatile unsigned long *lp;
volatile unsigned long long *llp;
} cfiptr_t;
@@ -141,7 +153,7 @@
static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -149,74 +161,157 @@
typedef unsigned long flash_sect_t;
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
-static void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static void flash_unlock_seq(flash_info_t *info);
-static int flash_isequal(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_isset(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_toggle(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c);
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf);
+static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd);
+static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect);
+static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd);
+static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd);
+static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd);
+static int flash_detect_cfi (flash_info_t * info);
static ulong flash_get_size (ulong base, int banknum);
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt);
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+ cfiword_t cword);
+static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
+ ulong tout, char *prompt);
#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+ int len);
#endif
+/*-----------------------------------------------------------------------
+ * create an address based on the offset and the port width
+ */
+inline uchar *flash_make_addr (flash_info_t * info, flash_sect_t sect,
+ uint offset)
+{
+ return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
+}
+
#ifdef DEBUG
-void print_longlong(char * str, unsigned long long data)
+/*-----------------------------------------------------------------------
+ * Debug support
+ */
+void print_longlong (char *str, unsigned long long data)
{
int i;
char *cp;
- cp = (unsigned char *)&data;
- for(i=0;i<8; i++)
- sprintf(&str[i*2], "%2.2x", *cp++);
+
+ cp = (unsigned char *) &data;
+ for (i = 0; i < 8; i++)
+ sprintf (&str[i * 2], "%2.2x", *cp++);
}
+static void flash_printqry (flash_info_t * info, flash_sect_t sect)
+{
+ cfiptr_t cptr;
+ int x, y;
+
+ for (x = 0; x < 0x40; x += 16 / info->portwidth) {
+ cptr.cp =
+ flash_make_addr (info, sect,
+ x + FLASH_OFFSET_CFI_RESP);
+ debug ("%p : ", cptr.cp);
+ for (y = 0; y < 16; y++) {
+ debug ("%2.2x ", cptr.cp[y]);
+ }
+ debug (" ");
+ for (y = 0; y < 16; y++) {
+ if (cptr.cp[y] >= 0x20 && cptr.cp[y] <= 0x7e) {
+ debug ("%c", cptr.cp[y]);
+ } else {
+ debug (".");
+ }
+ }
+ debug ("\n");
+ }
+}
+
#endif
/*-----------------------------------------------------------------------
- * create an address based on the offset and the port width
- */
-inline uchar * flash_make_addr(flash_info_t * info, flash_sect_t sect, uint offset)
-{
- return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
-}
-/*-----------------------------------------------------------------------
* read a character at a port width address
*/
-inline uchar flash_read_uchar(flash_info_t * info, uint offset)
+inline uchar flash_read_uchar (flash_info_t * info, uint offset)
{
uchar *cp;
- cp = flash_make_addr(info, 0, offset);
+
+ cp = flash_make_addr (info, 0, offset);
+#if defined(__LITTLE_ENDIAN)
+ return (cp[0]);
+#else
return (cp[info->portwidth - 1]);
+#endif
}
/*-----------------------------------------------------------------------
* read a short word by swapping for ppc format.
*/
-ushort flash_read_ushort(flash_info_t * info, flash_sect_t sect, uint offset)
+ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
{
- uchar * addr;
+ uchar *addr;
+ ushort retval;
- addr = flash_make_addr(info, sect, offset);
- return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
+#ifdef DEBUG
+ int x;
+#endif
+ addr = flash_make_addr (info, sect, offset);
+#ifdef DEBUG
+ debug ("ushort addr is at %p info->portwidth = %d\n", addr,
+ info->portwidth);
+ for (x = 0; x < 2 * info->portwidth; x++) {
+ debug ("addr[%x] = 0x%x\n", x, addr[x]);
+ }
+#endif
+#if defined(__LITTLE_ENDIAN)
+ retval = ((addr[(info->portwidth)] << 8) | addr[0]);
+#else
+ retval = ((addr[(2 * info->portwidth) - 1] << 8) |
+ addr[info->portwidth - 1]);
+#endif
+
+ debug ("retval = 0x%x\n", retval);
+ return retval;
}
/*-----------------------------------------------------------------------
* read a long word by picking the least significant byte of each maiximum
* port size word. Swap for ppc format.
*/
-ulong flash_read_long(flash_info_t * info, flash_sect_t sect, uint offset)
+ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
{
- uchar * addr;
- addr = flash_make_addr(info, sect, offset);
- return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
- (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
+ uchar *addr;
+ ulong retval;
+
+#ifdef DEBUG
+ int x;
+#endif
+ addr = flash_make_addr (info, sect, offset);
+#ifdef DEBUG
+ debug ("long addr is at %p info->portwidth = %d\n", addr,
+ info->portwidth);
+ for (x = 0; x < 4 * info->portwidth; x++) {
+ debug ("addr[%x] = 0x%x\n", x, addr[x]);
+ }
+#endif
+#if defined(__LITTLE_ENDIAN)
+ retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) |
+ (addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)]
+ << 8);
+#else
+ retval = (addr[(2 * info->portwidth) - 1] << 24) |
+ (addr[(info->portwidth) - 1] << 16) |
+ (addr[(4 * info->portwidth) - 1] << 8) |
+ addr[(3 * info->portwidth) - 1];
+#endif
+ return retval;
}
/*-----------------------------------------------------------------------
@@ -227,21 +322,20 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
- size += flash_info[i].size = flash_get_size(bank_base[i], i);
+ size += flash_info[i].size = flash_get_size (bank_base[i], i);
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, flash_info[i].size, flash_info[i].size << 20);
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", i, flash_info[i].size, flash_info[i].size << 20);
}
}
/* Monitor protection ON by default */
#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
#endif
return (size);
@@ -249,13 +343,13 @@
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int rcode = 0;
int prot;
flash_sect_t sect;
- if( info->flash_id != FLASH_MAN_CFI) {
+ if (info->flash_id != FLASH_MAN_CFI) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
@@ -265,44 +359,50 @@
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
- for (sect = s_first; sect<=s_last; sect++) {
+ for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- switch(info->vendor) {
+ switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
- flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_BLOCK_ERASE);
+ flash_write_cmd (info, sect, 0,
+ FLASH_CMD_ERASE_CONFIRM);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
- flash_unlock_seq(info);
- flash_write_cmd(info, sect, 0x555, AMD_CMD_ERASE_START);
- flash_unlock_seq(info);
- flash_write_cmd(info, sect, 0, AMD_CMD_ERASE_SECTOR);
+ flash_unlock_seq (info, sect);
+ flash_write_cmd (info, sect, 0x555,
+ AMD_CMD_ERASE_START);
+ flash_unlock_seq (info, sect);
+ flash_write_cmd (info, sect, 0,
+ AMD_CMD_ERASE_SECTOR);
break;
default:
- debug("Unkown flash vendor %d\n", info->vendor);
+ debug ("Unkown flash vendor %d\n",
+ info->vendor);
break;
}
- if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
+ if (flash_full_status_check
+ (info, sect, info->erase_blk_tout, "erase")) {
rcode = 1;
} else
- printf(".");
+ printf (".");
}
}
printf (" done\n");
@@ -311,7 +411,7 @@
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
int i;
@@ -320,15 +420,14 @@
return;
}
- printf("CFI conformant FLASH (%d x %d)",
- (info->portwidth << 3 ), (info->chipwidth << 3 ));
+ printf ("CFI conformant FLASH (%d x %d)",
+ (info->portwidth << 3), (info->chipwidth << 3));
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
- printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
- info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+ printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
+ for (i = 0; i < info->sector_count; ++i) {
#ifdef CFG_FLASH_EMPTY_INFO
int k;
int size;
@@ -338,21 +437,19 @@
/*
* Check if whole sector is erased
*/
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
else
- size = info->start[0] + info->size - info->start[i];
+ size = info->start[0] + info->size - info->start[i];
erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
+ flash = (volatile unsigned long *) info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
if ((i % 5) == 0)
printf ("\n");
@@ -365,8 +462,7 @@
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ info->start[i], info->protect[i] ? " (RO)" : " ");
#endif
}
printf ("\n");
@@ -379,7 +475,7 @@
* 1 - write timeout
* 2 - Flash not erased
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong wp;
ulong cp;
@@ -387,45 +483,69 @@
cfiword_t cword;
int i, rc;
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+ int buffered_size;
+#endif
+ int x8mode = 0;
+
+ /* special handling of 16 bit devices in 8 bit mode */
+ if ((info->interface == FLASH_CFI_X8X16)
+ && (info->chipwidth == FLASH_CFI_BY8)) {
+ switch (info->vendor) {
+ case CFI_CMDSET_INTEL_STANDARD:
+ case CFI_CMDSET_INTEL_EXTENDED:
+ x8mode = info->portwidth;
+ info->portwidth >>= 1; /* XXX - Need to test on x9/x16 in parallel. */
+ /*info->portwidth = FLASH_CFI_8BIT; */ /* XXX - Need to test on x9/x16 in parallel. */
+ break;
+ case CFI_CMDSET_AMD_STANDARD:
+ case CFI_CMDSET_AMD_EXTENDED:
+ default:
+ break;
+ }
+ }
+ /* get lower aligned address */
/* get lower aligned address */
wp = (addr & ~(info->portwidth - 1));
/* handle unaligned start */
- if((aln = addr - wp) != 0) {
+ if ((aln = addr - wp) != 0) {
cword.l = 0;
cp = wp;
- for(i=0;i<aln; ++i, ++cp)
- flash_add_byte(info, &cword, (*(uchar *)cp));
+ for (i = 0; i < aln; ++i, ++cp)
+ flash_add_byte (info, &cword, (*(uchar *) cp));
- for(; (i< info->portwidth) && (cnt > 0) ; i++) {
- flash_add_byte(info, &cword, *src++);
+ for (; (i < info->portwidth) && (cnt > 0); i++) {
+ flash_add_byte (info, &cword, *src++);
cnt--;
cp++;
}
- for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
- flash_add_byte(info, &cword, (*(uchar *)cp));
- if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+ flash_add_byte (info, &cword, (*(uchar *) cp));
+ if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
return rc;
wp = cp;
}
+ /* handle the aligned part */
#ifdef CFG_FLASH_USE_BUFFER_WRITE
- while(cnt >= info->portwidth) {
- i = info->buffer_size > cnt? cnt: info->buffer_size;
- if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
+ buffered_size = (info->portwidth / info->chipwidth);
+ buffered_size *= info->buffer_size;
+ while (cnt >= info->portwidth) {
+ i = buffered_size > cnt ? cnt : buffered_size;
+ if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
return rc;
wp += i;
src += i;
- cnt -=i;
+ cnt -= i;
}
#else
- /* handle the aligned part */
- while(cnt >= info->portwidth) {
+ while (cnt >= info->portwidth) {
cword.l = 0;
- for(i = 0; i < info->portwidth; i++) {
- flash_add_byte(info, &cword, *src++);
+ for (i = 0; i < info->portwidth; i++) {
+ flash_add_byte (info, &cword, *src++);
}
- if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
return rc;
wp += info->portwidth;
cnt -= info->portwidth;
@@ -439,154 +559,184 @@
* handle unaligned tail bytes
*/
cword.l = 0;
- for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
- flash_add_byte(info, &cword, *src++);
+ for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
+ flash_add_byte (info, &cword, *src++);
--cnt;
}
- for (; i<info->portwidth; ++i, ++cp) {
- flash_add_byte(info, & cword, (*(uchar *)cp));
+ for (; i < info->portwidth; ++i, ++cp) {
+ flash_add_byte (info, &cword, (*(uchar *) cp));
}
- return flash_write_cfiword(info, wp, cword);
+ /* special handling of 16 bit devices in 8 bit mode */
+ if (x8mode) {
+ info->portwidth = x8mode;;
+ }
+ return flash_write_cfiword (info, wp, cword);
}
/*-----------------------------------------------------------------------
*/
#ifdef CFG_FLASH_PROTECTION
-int flash_real_protect(flash_info_t *info, long sector, int prot)
+int flash_real_protect (flash_info_t * info, long sector, int prot)
{
int retcode = 0;
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
- if(prot)
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
+ if (prot)
+ flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET);
else
- flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
- if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
- prot?"protect":"unprotect")) == 0) {
+ if ((retcode =
+ flash_full_status_check (info, sector, info->erase_blk_tout,
+ prot ? "protect" : "unprotect")) == 0) {
info->protect[sector] = prot;
/* Intel's unprotect unprotects all locking */
- if(prot == 0) {
+ if (prot == 0) {
flash_sect_t i;
- for(i = 0 ; i<info->sector_count; i++) {
- if(info->protect[i])
- flash_real_protect(info, i, 1);
+
+ for (i = 0; i < info->sector_count; i++) {
+ if (info->protect[i])
+ flash_real_protect (info, i, 1);
}
}
}
return retcode;
- }
+}
+
/*-----------------------------------------------------------------------
* flash_read_user_serial - read the OneTimeProgramming cells
*/
-void flash_read_user_serial(flash_info_t * info, void * buffer, int offset, int len)
+void flash_read_user_serial (flash_info_t * info, void *buffer, int offset,
+ int len)
{
- uchar * src;
- uchar * dst;
+ uchar *src;
+ uchar *dst;
dst = buffer;
- src = flash_make_addr(info, 0, FLASH_OFFSET_USER_PROTECTION);
- flash_write_cmd(info,0, 0, FLASH_CMD_READ_ID);
- memcpy(dst,src + offset,len);
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ src = flash_make_addr (info, 0, FLASH_OFFSET_USER_PROTECTION);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
+ memcpy (dst, src + offset, len);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
}
+
/*
* flash_read_factory_serial - read the device Id from the protection area
*/
-void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len)
+void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
+ int len)
{
- uchar * src;
+ uchar *src;
- src = flash_make_addr(info, 0, FLASH_OFFSET_INTEL_PROTECTION);
- flash_write_cmd(info,0, 0, FLASH_CMD_READ_ID);
- memcpy(buffer,src + offset,len);
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ src = flash_make_addr (info, 0, FLASH_OFFSET_INTEL_PROTECTION);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID);
+ memcpy (buffer, src + offset, len);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
}
#endif /* CFG_FLASH_PROTECTION */
-static int flash_poll_status(flash_info_t * info, flash_sect_t sect)
+/*
+ * flash_is_busy - check to see if the flash is busy
+ * This routine checks the status of the chip and returns true if the chip is busy
+ */
+static int flash_is_busy (flash_info_t * info, flash_sect_t sect)
{
int retval;
- switch(info->vendor) {
+
+ switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- retval = !flash_isset(info, sect, 0, FLASH_STATUS_DONE);
+ retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
- retval = flash_toggle(info, sect, 0, AMD_STATUS_TOGGLE);
+ retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE);
break;
default:
retval = 0;
}
+ debug ("flash_is_busy: %d\n", retval);
return retval;
}
+
/*-----------------------------------------------------------------------
* wait for XSR.7 to be set. Time out with an error if it does not.
* This routine does not set the flash to read-array mode.
*/
-static int flash_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt)
+static int flash_status_check (flash_info_t * info, flash_sect_t sector,
+ ulong tout, char *prompt)
{
ulong start;
/* Wait for command completion */
start = get_timer (0);
- while (flash_poll_status(info, sector)) {
- if (get_timer(start) > info->erase_blk_tout) {
- printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
- flash_write_cmd(info, sector, 0, info->cmd_reset);
+ while (flash_is_busy (info, sector)) {
+ if (get_timer (start) > info->erase_blk_tout * CFG_HZ) {
+ printf ("Flash %s timeout at address %lx data %lx\n",
+ prompt, info->start[sector],
+ flash_read_long (info, sector, 0));
+ flash_write_cmd (info, sector, 0, info->cmd_reset);
return ERR_TIMOUT;
}
}
return ERR_OK;
}
+
/*-----------------------------------------------------------------------
* Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
* This routine sets the flash to read-array mode.
*/
-static int flash_full_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt)
+static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
+ ulong tout, char *prompt)
{
int retcode;
- retcode = flash_status_check(info, sector, tout, prompt);
- switch(info->vendor) {
+
+ retcode = flash_status_check (info, sector, tout, prompt);
+ switch (info->vendor) {
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
- if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
+ if ((retcode != ERR_OK)
+ && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
retcode = ERR_INVAL;
- printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
- if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
- printf("Command Sequence Error.\n");
- } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
- printf("Block Erase Error.\n");
+ printf ("Flash %s error at address %lx\n", prompt,
+ info->start[sector]);
+ if (flash_isset
+ (info, sector, 0,
+ FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
+ printf ("Command Sequence Error.\n");
+ } else if (flash_isset
+ (info, sector, 0, FLASH_STATUS_ECLBS)) {
+ printf ("Block Erase Error.\n");
retcode = ERR_NOT_ERASED;
- } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
- printf("Locking Error\n");
+ } else if (flash_isset
+ (info, sector, 0, FLASH_STATUS_PSLBS)) {
+ printf ("Locking Error\n");
}
- if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
- printf("Block locked.\n");
- retcode = ERR_PROTECTED;
- }
- if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
- printf("Vpp Low Error.\n");
+ if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
+ printf ("Block locked.\n");
+ retcode = ERR_PROTECTED;
+ }
+ if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
+ printf ("Vpp Low Error.\n");
}
- flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_RESET);
break;
default:
break;
}
return retcode;
}
+
/*-----------------------------------------------------------------------
*/
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
{
- switch(info->portwidth) {
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
cword->c = c;
break;
@@ -606,47 +756,64 @@
/*-----------------------------------------------------------------------
* make a proper sized command based on the port and chip widths
*/
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
{
int i;
- uchar *cp = (uchar *)cmdbuf;
- for(i=0; i< info->portwidth; i++)
- *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
+
+#if defined(__LITTLE_ENDIAN)
+ ushort stmp;
+#endif
+ uchar *cp = (uchar *) cmdbuf;
+
+ for (i = 0; i < info->portwidth; i++)
+ *cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
+#if defined(__LITTLE_ENDIAN)
+ if (info->portwidth == 2) {
+ stmp = *(ushort *) cmdbuf;
+ *(ushort *) cmdbuf = swab16 (stmp);
+ }
+#endif
}
/*
* Write a proper sized command to the correct address
*/
-static void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
+ uint offset, uchar cmd)
{
volatile cfiptr_t addr;
cfiword_t cword;
- addr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
+
+ addr.cp = flash_make_addr (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
- debug("fwc addr %p cmd %x %x 8bit x %d bit\n",addr.cp, cmd, cword.c,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
+ cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.cp = cword.c;
break;
case FLASH_CFI_16BIT:
- debug("fwc addr %p cmd %x %4.4x 16bit x %d bit\n",addr.wp, cmd, cword.w,
+ debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
+ cmd, cword.w,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.wp = cword.w;
break;
case FLASH_CFI_32BIT:
- debug("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n",addr.lp, cmd, cword.l,
+ debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
+ cmd, cword.l,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.lp = cword.l;
break;
case FLASH_CFI_64BIT:
#ifdef DEBUG
- {
+ {
char str[20];
- print_longlong(str, cword.ll);
- printf("fwc addr %p cmd %x %s 64 bit x %d bit\n",addr.llp, cmd, str,
+ print_longlong (str, cword.ll);
+
+ debug ("fwrite addr %p cmd %x %s 64 bit x %d bit\n",
+ addr.llp, cmd, str,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
}
#endif
@@ -655,43 +822,47 @@
}
}
-static void flash_unlock_seq(flash_info_t *info)
+static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
{
- flash_write_cmd(info, 0, 0x555, 0xAA);
- flash_write_cmd(info, 0, 0x2AA, 0x55);
+ flash_write_cmd (info, sect, 0x555, 0xAA);
+ flash_write_cmd (info, sect, 0x2AA, 0x55);
}
+
/*-----------------------------------------------------------------------
*/
-static int flash_isequal(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static int flash_isequal (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd)
{
cfiptr_t cptr;
cfiword_t cword;
int retval;
- cptr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
+
+ cptr.cp = flash_make_addr (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
- debug("is= cmd %x(%c) addr %p ", cmd,cmd, cptr.cp);
- switch(info->portwidth) {
+ debug ("is= cmd %x(%c) addr %p ", cmd, cmd, cptr.cp);
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
- debug("is= %x %x\n", cptr.cp[0], cword.c);
+ debug ("is= %x %x\n", cptr.cp[0], cword.c);
retval = (cptr.cp[0] == cword.c);
break;
case FLASH_CFI_16BIT:
- debug("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
+ debug ("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
retval = (cptr.wp[0] == cword.w);
break;
case FLASH_CFI_32BIT:
- debug("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
+ debug ("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
retval = (cptr.lp[0] == cword.l);
break;
case FLASH_CFI_64BIT:
#ifdef DEBUG
- {
+ {
char str1[20];
char str2[20];
- print_longlong(str1, cptr.llp[0]);
- print_longlong(str2, cword.ll);
- printf("is= %s %s\n", str1, str2);
+
+ print_longlong (str1, cptr.llp[0]);
+ print_longlong (str2, cword.ll);
+ debug ("is= %s %s\n", str1, str2);
}
#endif
retval = (cptr.llp[0] == cword.ll);
@@ -702,16 +873,19 @@
}
return retval;
}
+
/*-----------------------------------------------------------------------
*/
-static int flash_isset(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static int flash_isset (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd)
{
cfiptr_t cptr;
cfiword_t cword;
int retval;
- cptr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
+
+ cptr.cp = flash_make_addr (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
retval = ((cptr.cp[0] & cword.c) == cword.c);
break;
@@ -723,6 +897,7 @@
break;
case FLASH_CFI_64BIT:
retval = ((cptr.llp[0] & cword.ll) == cword.ll);
+ break;
default:
retval = 0;
break;
@@ -732,14 +907,16 @@
/*-----------------------------------------------------------------------
*/
-static int flash_toggle(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+static int flash_toggle (flash_info_t * info, flash_sect_t sect, uint offset,
+ uchar cmd)
{
cfiptr_t cptr;
cfiword_t cword;
int retval;
- cptr.cp = flash_make_addr(info, sect, offset);
- flash_make_cmd(info, cmd, &cword);
- switch(info->portwidth) {
+
+ cptr.cp = flash_make_addr (info, sect, offset);
+ flash_make_cmd (info, cmd, &cword);
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c));
break;
@@ -750,7 +927,8 @@
retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l));
break;
case FLASH_CFI_64BIT:
- retval = ((cptr.llp[0] & cword.ll) != (cptr.llp[0] & cword.ll));
+ retval = ((cptr.llp[0] & cword.ll) !=
+ (cptr.llp[0] & cword.ll));
break;
default:
retval = 0;
@@ -764,55 +942,71 @@
* http://www.jedec.org/download/search/jesd68.pdf
*
*/
-static int flash_detect_cfi(flash_info_t * info)
+static int flash_detect_cfi (flash_info_t * info)
{
+ debug ("flash detect cfi\n");
- puts("flash detect cfi\n");
-
- for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_64BIT;
- info->portwidth <<= 1) {
- /* for(info->chipwidth = info->portwidth;
- info->chipwidth > 0;
- info->chipwidth >>= 1) { */
- for(info->chipwidth =FLASH_CFI_BY8;
- info->chipwidth <= info->portwidth;
- info->chipwidth <<= 1) {
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
- if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
- flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
- flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
- debug("found port %d chip %d ", info->portwidth, info->chipwidth);
- debug("port %d bits chip %d bits\n", info->portwidth << CFI_FLASH_SHIFT_WIDTH,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ for (info->portwidth = FLASH_CFI_8BIT;
+ info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
+ for (info->chipwidth = FLASH_CFI_BY8;
+ info->chipwidth <= info->portwidth;
+ info->chipwidth <<= 1) {
+ flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd (info, 0, FLASH_OFFSET_CFI,
+ FLASH_CMD_CFI);
+ if (flash_isequal
+ (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
+ && flash_isequal (info, 0,
+ FLASH_OFFSET_CFI_RESP + 1, 'R')
+ && flash_isequal (info, 0,
+ FLASH_OFFSET_CFI_RESP + 2,
+ 'Y')) {
+ info->interface =
+ flash_read_ushort (info, 0,
+ FLASH_OFFSET_INTERFACE);
+ debug ("device interface is %d\n",
+ info->interface);
+ debug ("found port %d chip %d ",
+ info->portwidth, info->chipwidth);
+ debug ("port %d bits chip %d bits\n",
+ info->
+ portwidth << CFI_FLASH_SHIFT_WIDTH,
+ info->
+ chipwidth << CFI_FLASH_SHIFT_WIDTH);
return 1;
}
}
}
- puts("not found\n");
+ debug ("not found\n");
return 0;
}
+
/*
* The following code cannot be run from FLASH!
*
*/
static ulong flash_get_size (ulong base, int banknum)
{
- flash_info_t * info = &flash_info[banknum];
+ flash_info_t *info = &flash_info[banknum];
int i, j;
flash_sect_t sect_cnt;
unsigned long sector;
unsigned long tmp;
int size_ratio;
uchar num_erase_regions;
- int erase_region_size;
- int erase_region_count;
+ int erase_region_size;
+ int erase_region_count;
info->start[0] = base;
- if(flash_detect_cfi(info)){
- info->vendor = flash_read_ushort(info, 0, FLASH_OFFSET_PRIMARY_VENDOR);
- switch(info->vendor) {
+ if (flash_detect_cfi (info)) {
+ info->vendor =
+ flash_read_ushort (info, 0,
+ FLASH_OFFSET_PRIMARY_VENDOR);
+#ifdef DEBUG
+ flash_printqry (info, 0);
+#endif
+ switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
default:
@@ -824,65 +1018,95 @@
break;
}
- debug("manufacturer is %d\n", info->vendor);
+ debug ("manufacturer is %d\n", info->vendor);
size_ratio = info->portwidth / info->chipwidth;
- num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
- debug("size_ration %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
- info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
- debug("found %d erase regions\n", num_erase_regions);
+ /* if the chip is x8/x16 reduce the ratio by half */
+ if ((info->interface == FLASH_CFI_X8X16)
+ && (info->chipwidth == FLASH_CFI_BY8)) {
+ size_ratio >>= 1;
+ }
+ num_erase_regions =
+ flash_read_uchar (info,
+ FLASH_OFFSET_NUM_ERASE_REGIONS);
+ debug ("size_ratio %d port %d bits chip %d bits\n",
+ size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
+ info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ debug ("found %d erase regions\n", num_erase_regions);
sect_cnt = 0;
sector = base;
- for(i = 0 ; i < num_erase_regions; i++) {
- if(i > NUM_ERASE_REGIONS) {
- printf("%d erase regions found, only %d used\n",
- num_erase_regions, NUM_ERASE_REGIONS);
+ for (i = 0; i < num_erase_regions; i++) {
+ if (i > NUM_ERASE_REGIONS) {
+ printf ("%d erase regions found, only %d used\n", num_erase_regions, NUM_ERASE_REGIONS);
break;
}
- tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS + i*4);
- erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
+ tmp = flash_read_long (info, 0,
+ FLASH_OFFSET_ERASE_REGIONS +
+ i * 4);
+ erase_region_size =
+ (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
tmp >>= 16;
- erase_region_count = (tmp & 0xffff) +1;
- for(j = 0; j< erase_region_count; j++) {
+ erase_region_count = (tmp & 0xffff) + 1;
+ printf ("erase_region_count = %d erase_region_size = %d\n", erase_region_count, erase_region_size);
+ for (j = 0; j < erase_region_count; j++) {
info->start[sect_cnt] = sector;
sector += (erase_region_size * size_ratio);
- info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
+ info->protect[sect_cnt] =
+ flash_isset (info, sect_cnt,
+ FLASH_OFFSET_PROTECT,
+ FLASH_STATUS_PROTECT);
sect_cnt++;
}
}
info->sector_count = sect_cnt;
/* multiply the size by the number of chips */
- info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
- info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
- info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
- info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
- tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
- info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
+ info->size =
+ (1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) *
+ size_ratio;
+ info->buffer_size =
+ (1 <<
+ flash_read_ushort (info, 0,
+ FLASH_OFFSET_BUFFER_SIZE));
+ tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
+ info->erase_blk_tout =
+ (tmp *
+ (1 <<
+ flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
+ tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT);
+ info->buffer_write_tout =
+ (tmp *
+ (1 <<
+ flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT)));
+ tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT);
+ info->write_tout =
+ (tmp *
+ (1 <<
+ flash_read_uchar (info,
+ FLASH_OFFSET_WMAX_TOUT))) / 1000;
info->flash_id = FLASH_MAN_CFI;
}
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- return(info->size);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+ return (info->size);
}
/*-----------------------------------------------------------------------
*/
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+ cfiword_t cword)
{
cfiptr_t ctladdr;
cfiptr_t cptr;
int flag;
- ctladdr.cp = flash_make_addr(info, 0, 0);
- cptr.cp = (uchar *)dest;
+ ctladdr.cp = flash_make_addr (info, 0, 0);
+ cptr.cp = (uchar *) dest;
/* Check if Flash is (sufficiently) erased */
- switch(info->portwidth) {
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
flag = ((cptr.cp[0] & cword.c) == cword.c);
break;
@@ -890,7 +1114,7 @@
flag = ((cptr.wp[0] & cword.w) == cword.w);
break;
case FLASH_CFI_32BIT:
- flag = ((cptr.lp[0] & cword.l) == cword.l);
+ flag = ((cptr.lp[0] & cword.l) == cword.l);
break;
case FLASH_CFI_64BIT:
flag = ((cptr.lp[0] & cword.ll) == cword.ll);
@@ -898,26 +1122,26 @@
default:
return 2;
}
- if(!flag)
+ if (!flag)
return 2;
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
- switch(info->vendor) {
+ switch (info->vendor) {
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
- flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
break;
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
- flash_unlock_seq(info);
- flash_write_cmd(info, 0, 0x555, AMD_CMD_WRITE);
+ flash_unlock_seq (info, 0);
+ flash_write_cmd (info, 0, 0x555, AMD_CMD_WRITE);
break;
}
- switch(info->portwidth) {
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
cptr.cp[0] = cword.c;
break;
@@ -933,10 +1157,10 @@
}
/* re-enable interrupts if necessary */
- if(flag)
- enable_interrupts();
+ if (flag)
+ enable_interrupts ();
- return flash_full_status_check(info, 0, info->write_tout, "write");
+ return flash_full_status_check (info, 0, info->write_tout, "write");
}
#ifdef CFG_FLASH_USE_BUFFER_WRITE
@@ -945,17 +1169,19 @@
* when the passed address is greater or equal to the sector address
* we have a match
*/
-static flash_sect_t find_sector(flash_info_t *info, ulong addr)
+static flash_sect_t find_sector (flash_info_t * info, ulong addr)
{
flash_sect_t sector;
- for(sector = info->sector_count - 1; sector >= 0; sector--) {
- if(addr >= info->start[sector])
+
+ for (sector = info->sector_count - 1; sector >= 0; sector--) {
+ if (addr >= info->start[sector])
break;
}
return sector;
}
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+ int len)
{
flash_sect_t sector;
int cnt;
@@ -964,13 +1190,15 @@
volatile cfiptr_t dst;
src.cp = cp;
- dst.cp = (uchar *)dest;
- sector = find_sector(info, dest);
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
- if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
- "write to buffer")) == ERR_OK) {
- switch(info->portwidth) {
+ dst.cp = (uchar *) dest;
+ sector = find_sector (info, dest);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+ if ((retcode =
+ flash_status_check (info, sector, info->buffer_write_tout,
+ "write to buffer")) == ERR_OK) {
+ /* reduce the number of loops by the width of the port */
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
cnt = len;
break;
@@ -987,9 +1215,9 @@
return ERR_INVAL;
break;
}
- flash_write_cmd(info, sector, 0, (uchar)cnt-1);
- while(cnt-- > 0) {
- switch(info->portwidth) {
+ flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ while (cnt-- > 0) {
+ switch (info->portwidth) {
case FLASH_CFI_8BIT:
*dst.cp++ = *src.cp++;
break;
@@ -1007,11 +1235,14 @@
break;
}
}
- flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
- retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
- "buffer write");
+ flash_write_cmd (info, sector, 0,
+ FLASH_CMD_WRITE_BUFFER_CONFIRM);
+ retcode =
+ flash_full_status_check (info, sector,
+ info->buffer_write_tout,
+ "buffer write");
}
- flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
return retcode;
}
#endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/examples/Makefile b/examples/Makefile
index 945b745..6bd10b5 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -41,6 +41,10 @@
LOAD_ADDR = 0x01000000 -L $(gcclibdir)/m32 -T nios.lds
endif
+ifeq ($(ARCH),m68k)
+LOAD_ADDR = 0x20000 -L $(clibdir)
+endif
+
include $(TOPDIR)/config.mk
SREC = hello_world.srec
@@ -56,11 +60,6 @@
BIN += sched.bin sched
endif
-ifeq ($(ARCH),m68k)
-SREC =
-BIN =
-endif
-
# The following example is pretty 8xx specific...
ifeq ($(CPU),mpc8xx)
SREC += timer.srec
@@ -94,6 +93,7 @@
LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
+clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
CPPFLAGS += -I..
diff --git a/examples/stubs.c b/examples/stubs.c
index 6ca6d78..a26337a 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -78,6 +78,22 @@
" jmp %%g0\n" \
" nop \n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
+#elif defined(CONFIG_M68K)
+/*
+ * d7 holds the pointer to the global_data, a0 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" move.l %%d7, %%a0\n" \
+" adda.l %0, %%a0\n" \
+" move.l (%%a0), %%a0\n" \
+" adda.l %1, %%a0\n" \
+" move.l (%%a0), %%a0\n" \
+" jmp (%%a0)\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "a0");
#else
#error stubs definition missing for this architecture
#endif
diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h
new file mode 100644
index 0000000..3283714
--- /dev/null
+++ b/include/asm-m68k/bitops.h
@@ -0,0 +1,18 @@
+/*
+ * bitops.h: Bit string operations on the m68k
+ */
+
+#ifndef _M68K_BITOPS_H
+#define _M68K_BITOPS_H
+
+#include <linux/config.h>
+#include <asm/byteorder.h>
+
+extern void set_bit(int nr, volatile void *addr);
+extern void clear_bit(int nr, volatile void *addr);
+extern void change_bit(int nr, volatile void *addr);
+extern int test_and_set_bit(int nr, volatile void *addr);
+extern int test_and_clear_bit(int nr, volatile void *addr);
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#endif /* _M68K_BITOPS_H */
diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h
new file mode 100644
index 0000000..ce613ac
--- /dev/null
+++ b/include/asm-m68k/byteorder.h
@@ -0,0 +1,7 @@
+#ifndef _M68K_BYTEORDER_H
+#define _M68K_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68K_BYTEORDER_H */
diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h
new file mode 100644
index 0000000..5bbbfb2
--- /dev/null
+++ b/include/asm-m68k/fec.h
@@ -0,0 +1,86 @@
+/*
+ * fec.h -- Fast Ethernet Controller definitions
+ *
+ * Some definitions copied from commproc.h for MPC8xx:
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef fec_h
+#define fec_h
+
+/* Buffer descriptors used FEC.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+#endif /* fec_h */
diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h
index 89bc0ad..f8a3d88 100644
--- a/include/asm-m68k/global_data.h
+++ b/include/asm-m68k/global_data.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2002-2003
+ * (C) Copyright 2002 - 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -48,6 +48,7 @@
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
#endif
+ void **jt; /* Standalone app jump table */
} gd_t;
/*
@@ -56,7 +57,11 @@
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#if 0
extern gd_t *global_data;
#define DECLARE_GLOBAL_DATA_PTR gd_t *gd = global_data
+#else
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("d7")
+#endif
#endif /* __ASM_GBL_DATA_H */
diff --git a/include/asm-m68k/immap_5272.h b/include/asm-m68k/immap_5272.h
new file mode 100644
index 0000000..ecb4906
--- /dev/null
+++ b/include/asm-m68k/immap_5272.h
@@ -0,0 +1,447 @@
+/*
+ * MCF5272 Internal Memory Map
+ *
+ * Copyright (c) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5272__
+#define __IMMAP_5272__
+
+/* System configuration registers
+*/
+typedef struct sys_ctrl {
+ uint sc_mbar;
+ ushort sc_scr;
+ ushort sc_spr;
+ uint sc_pmr;
+ char res1[2];
+ ushort sc_alpr;
+ uint sc_dir;
+ char res2[12];
+} sysctrl_t;
+
+/* Interrupt module registers
+*/
+typedef struct int_ctrl {
+ uint int_icr1;
+ uint int_icr2;
+ uint int_icr3;
+ uint int_icr4;
+ uint int_isr;
+ uint int_pitr;
+ uint int_piwr;
+ uchar res1[3];
+ uchar int_pivr;
+} intctrl_t;
+
+/* Chip select module registers.
+*/
+typedef struct cs_ctlr {
+ uint cs_br0;
+ uint cs_or0;
+ uint cs_br1;
+ uint cs_or1;
+ uint cs_br2;
+ uint cs_or2;
+ uint cs_br3;
+ uint cs_or3;
+ uint cs_br4;
+ uint cs_or4;
+ uint cs_br5;
+ uint cs_or5;
+ uint cs_br6;
+ uint cs_or6;
+ uint cs_br7;
+ uint cs_or7;
+} csctrl_t;
+
+/* GPIO port registers
+*/
+typedef struct gpio_ctrl {
+ uint gpio_pacnt;
+ ushort gpio_paddr;
+ ushort gpio_padat;
+ uint gpio_pbcnt;
+ ushort gpio_pbddr;
+ ushort gpio_pbdat;
+ uchar res1[4];
+ ushort gpio_pcddr;
+ ushort gpio_pcdat;
+ uint gpio_pdcnt;
+ uchar res2[4];
+} gpio_t;
+
+/* QSPI module registers
+ */
+typedef struct qspi_ctrl {
+ ushort qspi_qmr;
+ uchar res1[2];
+ ushort qspi_qdlyr;
+ uchar res2[2];
+ ushort qspi_qwr;
+ uchar res3[2];
+ ushort qspi_qir;
+ uchar res4[2];
+ ushort qspi_qar;
+ uchar res5[2];
+ ushort qspi_qdr;
+ uchar res6[10];
+} qspi_t;
+
+/* PWM module registers
+ */
+typedef struct pwm_ctrl {
+ uchar pwm_pwcr0;
+ uchar res1[3];
+ uchar pwm_pwcr1;
+ uchar res2[3];
+ uchar pwm_pwcr2;
+ uchar res3[7];
+ uchar pwm_pwwd0;
+ uchar res4[3];
+ uchar pwm_pwwd1;
+ uchar res5[3];
+ uchar pwm_pwwd2;
+ uchar res6[7];
+} pwm_t;
+
+/* DMA module registers
+ */
+typedef struct dma_ctrl {
+ ulong dma_dmr;
+ uchar res1[2];
+ ushort dma_dir;
+ ulong dma_dbcr;
+ ulong dma_dsar;
+ ulong dma_ddar;
+ uchar res2[12];
+} dma_t;
+
+/* UART module registers
+ */
+typedef struct uart_ctrl {
+ uchar uart_umr;
+ uchar res1[3];
+ uchar uart_usr_ucsr;
+ uchar res2[3];
+ uchar uart_ucr;
+ uchar res3[3];
+ uchar uart_urb_utb;
+ uchar res4[3];
+ uchar uart_uipcr_uacr;
+ uchar res5[3];
+ uchar uart_uisr_uimr;
+ uchar res6[3];
+ uchar uart_udu;
+ uchar res7[3];
+ uchar uart_udl;
+ uchar res8[3];
+ uchar uart_uabu;
+ uchar res9[3];
+ uchar uart_uabl;
+ uchar res10[3];
+ uchar uart_utf;
+ uchar res11[3];
+ uchar uart_urf;
+ uchar res12[3];
+ uchar uart_ufpd;
+ uchar res13[3];
+ uchar uart_uip;
+ uchar res14[3];
+ uchar uart_uop1;
+ uchar res15[3];
+ uchar uart_uop0;
+ uchar res16[3];
+} uart_t;
+
+/* SDRAM controller registers, offset: 0x180
+ */
+typedef struct sdram_ctrl {
+ uchar res1[2];
+ ushort sdram_sdcr;
+ uchar res2[2];
+ ushort sdram_sdtr;
+ uchar res3[120];
+} sdramctrl_t;
+
+/* Timer module registers
+ */
+typedef struct timer_ctrl {
+ ushort timer_tmr;
+ ushort res1;
+ ushort timer_trr;
+ ushort res2;
+ ushort timer_tcap;
+ ushort res3;
+ ushort timer_tcn;
+ ushort res4;
+ ushort timer_ter;
+ uchar res5[14];
+} timer_t;
+
+/* Watchdog registers
+ */
+typedef struct wdog_ctrl {
+ ushort wdog_wrrr;
+ ushort res1;
+ ushort wdog_wirr;
+ ushort res2;
+ ushort wdog_wcr;
+ ushort res3;
+ ushort wdog_wer;
+ uchar res4[114];
+} wdog_t;
+
+/* PLIC module registers
+ */
+typedef struct plic_ctrl {
+ ulong plic_p0b1rr;
+ ulong plic_p1b1rr;
+ ulong plic_p2b1rr;
+ ulong plic_p3b1rr;
+ ulong plic_p0b2rr;
+ ulong plic_p1b2rr;
+ ulong plic_p2b2rr;
+ ulong plic_p3b2rr;
+ uchar plic_p0drr;
+ uchar plic_p1drr;
+ uchar plic_p2drr;
+ uchar plic_p3drr;
+ uchar res1[4];
+ ulong plic_p0b1tr;
+ ulong plic_p1b1tr;
+ ulong plic_p2b1tr;
+ ulong plic_p3b1tr;
+ ulong plic_p0b2tr;
+ ulong plic_p1b2tr;
+ ulong plic_p2b2tr;
+ ulong plic_p3b2tr;
+ uchar plic_p0dtr;
+ uchar plic_p1dtr;
+ uchar plic_p2dtr;
+ uchar plic_p3dtr;
+ uchar res2[4];
+ ushort plic_p0cr;
+ ushort plic_p1cr;
+ ushort plic_p2cr;
+ ushort plic_p3cr;
+ ushort plic_p0icr;
+ ushort plic_p1icr;
+ ushort plic_p2icr;
+ ushort plic_p3icr;
+ ushort plic_p0gmr;
+ ushort plic_p1gmr;
+ ushort plic_p2gmr;
+ ushort plic_p3gmr;
+ ushort plic_p0gmt;
+ ushort plic_p1gmt;
+ ushort plic_p2gmt;
+ ushort plic_p3gmt;
+ uchar res3;
+ uchar plic_pgmts;
+ uchar plic_pgmta;
+ uchar res4;
+ uchar plic_p0gcir;
+ uchar plic_p1gcir;
+ uchar plic_p2gcir;
+ uchar plic_p3gcir;
+ uchar plic_p0gcit;
+ uchar plic_p1gcit;
+ uchar plic_p2gcit;
+ uchar plic_p3gcit;
+ uchar res5[3];
+ uchar plic_pgcitsr;
+ uchar res6[3];
+ uchar plic_pdcsr;
+ ushort plic_p0psr;
+ ushort plic_p1psr;
+ ushort plic_p2psr;
+ ushort plic_p3psr;
+ ushort plic_pasr;
+ uchar res7;
+ uchar plic_plcr;
+ ushort res8;
+ ushort plic_pdrqr;
+ ushort plic_p0sdr;
+ ushort plic_p1sdr;
+ ushort plic_p2sdr;
+ ushort plic_p3sdr;
+ ushort res9;
+ ushort plic_pcsr;
+ uchar res10[1184];
+} plic_t;
+
+/* Fast ethernet controller registers
+ */
+typedef struct fec {
+ uint fec_ecntrl; /* ethernet control register */
+ uint fec_ievent; /* interrupt event register */
+ uint fec_imask; /* interrupt mask register */
+ uint fec_ivec; /* interrupt level and vector status */
+ uint fec_r_des_active; /* Rx ring updated flag */
+ uint fec_x_des_active; /* Tx ring updated flag */
+ uint res3[10]; /* reserved */
+ uint fec_mii_data; /* MII data register */
+ uint fec_mii_speed; /* MII speed control register */
+ uint res4[17]; /* reserved */
+ uint fec_r_bound; /* end of RAM (read-only) */
+ uint fec_r_fstart; /* Rx FIFO start address */
+ uint res5[6]; /* reserved */
+ uint fec_x_fstart; /* Tx FIFO start address */
+ uint res7[21]; /* reserved */
+ uint fec_r_cntrl; /* Rx control register */
+ uint fec_r_hash; /* Rx hash register */
+ uint res8[14]; /* reserved */
+ uint fec_x_cntrl; /* Tx control register */
+ uint res9[0x9e]; /* reserved */
+ uint fec_addr_low; /* lower 32 bits of station address */
+ uint fec_addr_high; /* upper 16 bits of station address */
+ uint fec_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_r_des_start; /* beginning of Rx descriptor ring */
+ uint fec_x_des_start; /* beginning of Tx descriptor ring */
+ uint fec_r_buff_size; /* Rx buffer size */
+ uint res2[9]; /* reserved */
+ uchar fec_fifo[960]; /* fifo RAM */
+} fec_t;
+
+/* USB module registers
+*/
+typedef struct usb {
+ ushort res1;
+ ushort usb_fnr;
+ ushort res2;
+ ushort usb_fnmr;
+ ushort res3;
+ ushort usb_rfmr;
+ ushort res4;
+ ushort usb_rfmmr;
+ uchar res5[3];
+ uchar usb_far;
+ ulong usb_asr;
+ ulong usb_drr1;
+ ulong usb_drr2;
+ ushort res6;
+ ushort usb_specr;
+ ushort res7;
+ ushort usb_ep0sr;
+ ulong usb_iep0cfg;
+ ulong usb_oep0cfg;
+ ulong usb_ep1cfg;
+ ulong usb_ep2cfg;
+ ulong usb_ep3cfg;
+ ulong usb_ep4cfg;
+ ulong usb_ep5cfg;
+ ulong usb_ep6cfg;
+ ulong usb_ep7cfg;
+ ulong usb_ep0ctl;
+ ushort res8;
+ ushort usb_ep1ctl;
+ ushort res9;
+ ushort usb_ep2ctl;
+ ushort res10;
+ ushort usb_ep3ctl;
+ ushort res11;
+ ushort usb_ep4ctl;
+ ushort res12;
+ ushort usb_ep5ctl;
+ ushort res13;
+ ushort usb_ep6ctl;
+ ushort res14;
+ ushort usb_ep7ctl;
+ ulong usb_ep0isr;
+ ushort res15;
+ ushort usb_ep1isr;
+ ushort res16;
+ ushort usb_ep2isr;
+ ushort res17;
+ ushort usb_ep3isr;
+ ushort res18;
+ ushort usb_ep4isr;
+ ushort res19;
+ ushort usb_ep5isr;
+ ushort res20;
+ ushort usb_ep6isr;
+ ushort res21;
+ ushort usb_ep7isr;
+ ulong usb_ep0imr;
+ ushort res22;
+ ushort usb_ep1imr;
+ ushort res23;
+ ushort usb_ep2imr;
+ ushort res24;
+ ushort usb_ep3imr;
+ ushort res25;
+ ushort usb_ep4imr;
+ ushort res26;
+ ushort usb_ep5imr;
+ ushort res27;
+ ushort usb_ep6imr;
+ ushort res28;
+ ushort usb_ep7imr;
+ ulong usb_ep0dr;
+ ulong usb_ep1dr;
+ ulong usb_ep2dr;
+ ulong usb_ep3dr;
+ ulong usb_ep4dr;
+ ulong usb_ep5dr;
+ ulong usb_ep6dr;
+ ulong usb_ep7dr;
+ ushort res29;
+ ushort usb_ep0dpr;
+ ushort res30;
+ ushort usb_ep1dpr;
+ ushort res31;
+ ushort usb_ep2dpr;
+ ushort res32;
+ ushort usb_ep3dpr;
+ ushort res33;
+ ushort usb_ep4dpr;
+ ushort res34;
+ ushort usb_ep5dpr;
+ ushort res35;
+ ushort usb_ep6dpr;
+ ushort res36;
+ ushort usb_ep7dpr;
+ uchar res37[788];
+ uchar usb_cfgram[1024];
+} usb_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+ sysctrl_t sysctrl_reg; /* System configuration registers */
+ intctrl_t intctrl_reg; /* Interrupt controller registers */
+ csctrl_t csctrl_reg; /* Chip select controller registers */
+ gpio_t gpio_reg; /* GPIO controller registers */
+ qspi_t qspi_reg; /* QSPI controller registers */
+ pwm_t pwm_reg; /* Pulse width modulation registers */
+ dma_t dma_reg; /* DMA registers */
+ uart_t uart_reg[2]; /* UART registers */
+ sdramctrl_t sdram_reg; /* SDRAM controller registers */
+ timer_t timer_reg[4]; /* Timer registers */
+ wdog_t wdog_reg; /* Watchdog registers */
+ plic_t plic_reg; /* Physical layer interface registers */
+ fec_t fec_reg; /* Fast ethernet controller registers */
+ usb_t usb_reg; /* USB controller registers */
+} immap_t;
+
+#endif /* __IMMAP_5272__ */
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
new file mode 100644
index 0000000..f2b77db
--- /dev/null
+++ b/include/asm-m68k/immap_5282.h
@@ -0,0 +1,63 @@
+/*
+ * MCF5282 Internal Memory Map
+ *
+ * Copyright (c) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5282__
+#define __IMMAP_5282__
+
+
+/* Fast ethernet controller registers
+ */
+typedef struct fec {
+ uint fec_ecntrl; /* ethernet control register */
+ uint fec_ievent; /* interrupt event register */
+ uint fec_imask; /* interrupt mask register */
+ uint fec_ivec; /* interrupt level and vector status */
+ uint fec_r_des_active; /* Rx ring updated flag */
+ uint fec_x_des_active; /* Tx ring updated flag */
+ uint res3[10]; /* reserved */
+ uint fec_mii_data; /* MII data register */
+ uint fec_mii_speed; /* MII speed control register */
+ uint res4[17]; /* reserved */
+ uint fec_r_bound; /* end of RAM (read-only) */
+ uint fec_r_fstart; /* Rx FIFO start address */
+ uint res5[6]; /* reserved */
+ uint fec_x_fstart; /* Tx FIFO start address */
+ uint res7[21]; /* reserved */
+ uint fec_r_cntrl; /* Rx control register */
+ uint fec_r_hash; /* Rx hash register */
+ uint res8[14]; /* reserved */
+ uint fec_x_cntrl; /* Tx control register */
+ uint res9[0x9e]; /* reserved */
+ uint fec_addr_low; /* lower 32 bits of station address */
+ uint fec_addr_high; /* upper 16 bits of station address */
+ uint fec_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_r_des_start; /* beginning of Rx descriptor ring */
+ uint fec_x_des_start; /* beginning of Tx descriptor ring */
+ uint fec_r_buff_size; /* Rx buffer size */
+ uint res2[9]; /* reserved */
+ uchar fec_fifo[960]; /* fifo RAM */
+} fec_t;
+
+#endif /* __IMMAP_5282__ */
diff --git a/include/asm-m68k/m5272.h b/include/asm-m68k/m5272.h
new file mode 100644
index 0000000..54d4a32
--- /dev/null
+++ b/include/asm-m68k/m5272.h
@@ -0,0 +1,99 @@
+/*
+ * mcf5272.h -- Definitions for Motorola Coldfire 5272
+ *
+ * Based on mcf5272sim.h of uCLinux distribution:
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef mcf5272_h
+#define mcf5272_h
+/****************************************************************************/
+
+/*
+ * Size of internal RAM
+ */
+
+#define INT_RAM_SIZE 4096
+
+
+/*
+ * Define the 5272 SIM register set addresses.
+ */
+#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */
+#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/
+#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */
+#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */
+#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */
+
+#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */
+#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */
+#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */
+
+#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */
+#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */
+#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */
+#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */
+
+#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */
+#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */
+#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */
+#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */
+#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */
+#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */
+#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */
+#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */
+#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */
+#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */
+#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */
+#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */
+#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */
+#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */
+#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */
+#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */
+
+#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */
+#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */
+#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
+#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
+#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
+#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
+#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
+#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
+#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
+#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
+#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
+
+#endif /* mcf5272_h */
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
new file mode 100644
index 0000000..073b0bc
--- /dev/null
+++ b/include/asm-m68k/m5282.h
@@ -0,0 +1,60 @@
+/*
+ * mcf5282.h -- Definitions for Motorola Coldfire 5282
+ *
+ * Based on mcf5282sim.h of uCLinux distribution:
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************/
+#ifndef m5282_h
+#define m5282_h
+/****************************************************************************/
+
+/*
+ * Size of internal RAM
+ */
+
+#define INT_RAM_SIZE 65536
+
+
+/*
+ * Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
+
+#define MCF5282_GPIO_PUAPAR 0x10005C
+
+
+/****************************************************************************/
+#endif /* m5282_h */
diff --git a/include/asm-m68k/mcftimer.h b/include/asm-m68k/mcftimer.h
new file mode 100644
index 0000000..047950b
--- /dev/null
+++ b/include/asm-m68k/mcftimer.h
@@ -0,0 +1,113 @@
+/*
+ * mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ * Based on mcftimer.h of uCLinux distribution:
+ * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************/
+#ifndef mcftimer_h
+#define mcftimer_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ * Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */
+#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
+#elif defined(CONFIG_M5282)
+#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */
+#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */
+#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */
+#define MCFTIMER_BASE4 0x180000 /* Base address of TIMER3 */
+#endif
+
+/*
+ * Define the TIMER register set addresses.
+ */
+#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */
+#define MCFTIMER_TRR 0x02 /* Timer Reference (r/w) */
+#define MCFTIMER_TCR 0x04 /* Timer Capture reg (r/w) */
+#define MCFTIMER_TCN 0x06 /* Timer Counter reg (r/w) */
+#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
+
+
+/*
+ * Define the TIMER register set addresses for 5282.
+ */
+#define MCFTIMER_PCSR 0
+#define MCFTIMER_PMR 1
+#define MCFTIMER_PCNTR 2
+
+/*
+ * Bit definitions for the Timer Mode Register (TMR).
+ * Register bit flags are common accross ColdFires.
+ */
+#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */
+#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */
+#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */
+#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */
+#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */
+#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */
+#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */
+#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */
+#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */
+#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */
+#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */
+#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */
+#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */
+#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */
+#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */
+#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */
+#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */
+
+/*
+ * Bit definitions for the Timer Event Registers (TER).
+ */
+#define MCFTIMER_TER_CAP 0x01 /* Capture event */
+#define MCFTIMER_TER_REF 0x02 /* Refernece event */
+
+/*
+ * Bit definitions for the 5282 PIT Control and Status Register (PCSR).
+ */
+#define MCFTIMER_PCSR_EN 0x0001
+#define MCFTIMER_PCSR_RLD 0x0002
+#define MCFTIMER_PCSR_PIF 0x0004
+#define MCFTIMER_PCSR_PIE 0x0008
+#define MCFTIMER_PCSR_OVW 0x0010
+#define MCFTIMER_PCSR_HALTED 0x0020
+#define MCFTIMER_PCSR_DOZE 0x0040
+
+
+/****************************************************************************/
+#endif /* mcftimer_h */
diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h
new file mode 100644
index 0000000..7b80245
--- /dev/null
+++ b/include/asm-m68k/mcfuart.h
@@ -0,0 +1,217 @@
+/*
+ * mcfuart.h -- ColdFire internal UART support defines.
+ *
+ * File copied from mcfuart.h of uCLinux distribution:
+ * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************/
+#ifndef mcfuart_h
+#define mcfuart_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ * Define the base address of the UARTS within the MBAR address
+ * space.
+ */
+#if defined(CONFIG_M5272)
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M5282)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#endif
+#endif
+
+
+/*
+ * Define the ColdFire UART register set addresses.
+ */
+#define MCFUART_UMR 0x00 /* Mode register (r/w) */
+#define MCFUART_USR 0x04 /* Status register (r) */
+#define MCFUART_UCSR 0x04 /* Clock Select (w) */
+#define MCFUART_UCR 0x08 /* Command register (w) */
+#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
+#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
+#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
+#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
+#define MCFUART_UISR 0x14 /* Interrup Status (r) */
+#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
+#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
+#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
+#ifdef CONFIG_M5272
+#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
+#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
+#else
+#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
+#endif
+#define MCFUART_UIPR 0x34 /* Input Port (r) */
+#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
+#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
+
+
+/*
+ * Define bit flags in Mode Register 1 (MR1).
+ */
+#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
+#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
+#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
+#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
+#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
+
+#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
+#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
+#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
+#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
+#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
+
+#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
+#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
+#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
+#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
+
+/*
+ * Define bit flags in Mode Register 2 (MR2).
+ */
+#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
+#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
+#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
+#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
+#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
+
+#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
+#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
+#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
+
+/*
+ * Define bit flags in Status Register (USR).
+ */
+#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
+#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
+#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
+#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
+#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
+#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
+#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
+#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
+
+#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+ MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ * Define bit flags in Clock Select Register (UCSR).
+ */
+#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
+#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
+#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
+
+#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
+#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
+#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
+
+/*
+ * Define bit flags in Command Register (UCR).
+ */
+#define MCFUART_UCR_CMDNULL 0x00 /* No command */
+#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */
+#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */
+#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */
+#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */
+#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */
+#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
+#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
+
+#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
+#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
+#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
+#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
+#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
+#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
+
+/*
+ * Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
+#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Input Port Register (UIP).
+ */
+#define MCFUART_UIPR_CTS 0x01 /* CTS value */
+
+/*
+ * Define bit flags in Output Port Registers (UOP).
+ * Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
+
+/*
+ * Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define MCFUART_UACR_IEC 0x01 /* Input enable control */
+
+/*
+ * Define bit flags in Interrupt Status Register (UISR).
+ * These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
+#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
+#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
+#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
+
+#ifdef CONFIG_M5272
+/*
+ * Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define MCFUART_UTF_TXB 0x1f /* transmitter data level */
+#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */
+#define MCFUART_UTF_TXS 0xc0 /* transmitter status */
+
+/*
+ * Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define MCFUART_URF_RXB 0x1f /* receiver data level */
+#define MCFUART_URF_FULL 0x20 /* receiver fifo full */
+#define MCFUART_URF_RXS 0xc0 /* receiver status */
+#endif
+
+/****************************************************************************/
+#endif /* mcfuart_h */
diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h
new file mode 100644
index 0000000..3fafa6f
--- /dev/null
+++ b/include/asm-m68k/processor.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#define _GLOBAL(n)\
+ .globl n;\
+n:
+
+/* Macros for setting and retrieving special purpose registers */
+#define setvbr(v) asm volatile("movec %0,%%VBR" : : "r" (v))
+
+#ifndef __ASSEMBLY__
+
+#endif /* ifndef ASSEMBLY*/
+
+#endif /* __ASM_M68K_PROCESSOR_H */
diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h
index 8205518..a80ff90 100644
--- a/include/asm-m68k/ptrace.h
+++ b/include/asm-m68k/ptrace.h
@@ -1,107 +1,59 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
*
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
-#include <linux/config.h>
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_M68K64BRIDGE
-#define M68K_REG unsigned long /*long*/
-#else
-#define M68K_REG unsigned long
-#endif
-struct pt_regs {
- M68K_REG gpr[32];
- M68K_REG nip;
- M68K_REG msr;
- M68K_REG orig_gpr3; /* Used for restarting system calls */
- M68K_REG ctr;
- M68K_REG link;
- M68K_REG xer;
- M68K_REG ccr;
- M68K_REG mq; /* 601 only (not used at present) */
- /* Used on APUS to hold IPL value. */
- M68K_REG trap; /* Reason for being here */
- M68K_REG dar; /* Fault registers */
- M68K_REG dsisr;
- M68K_REG result; /* Result of a system call */
-};
-#endif
-
-#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
-
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE 64
-
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
+ * This struct defines the way the registers are stored on the
+ * kernel stack during an exception.
*/
-#define PT_R0 0
-#define PT_R1 1
-#define PT_R2 2
-#define PT_R3 3
-#define PT_R4 4
-#define PT_R5 5
-#define PT_R6 6
-#define PT_R7 7
-#define PT_R8 8
-#define PT_R9 9
-#define PT_R10 10
-#define PT_R11 11
-#define PT_R12 12
-#define PT_R13 13
-#define PT_R14 14
-#define PT_R15 15
-#define PT_R16 16
-#define PT_R17 17
-#define PT_R18 18
-#define PT_R19 19
-#define PT_R20 20
-#define PT_R21 21
-#define PT_R22 22
-#define PT_R23 23
-#define PT_R24 24
-#define PT_R25 25
-#define PT_R26 26
-#define PT_R27 27
-#define PT_R28 28
-#define PT_R29 29
-#define PT_R30 30
-#define PT_R31 31
+#ifndef __ASSEMBLY__
-#define PT_NIP 32
-#define PT_MSR 33
-#ifdef __KERNEL__
-#define PT_ORIG_R3 34
+struct pt_regs {
+ ulong d0;
+ ulong d1;
+ ulong d2;
+ ulong d3;
+ ulong d4;
+ ulong d5;
+ ulong d6;
+ ulong d7;
+ ulong a0;
+ ulong a1;
+ ulong a2;
+ ulong a3;
+ ulong a4;
+ ulong a5;
+ ulong a6;
+#if defined(CONFIG_M5272) || defined(CONFIG_M5282)
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+ unsigned short sr;
+ unsigned long pc;
+#else
+ unsigned short sr;
+ unsigned long pc;
#endif
-#define PT_CTR 35
-#define PT_LNK 36
-#define PT_XER 37
-#define PT_CCR 38
-#define PT_MQ 39
+};
-#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+#endif /* #ifndef __ASSEMBLY__ */
-#endif
+#endif /* #ifndef _M68K_PTRACE_H */
diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h
index b414490..3a21fd2 100644
--- a/include/asm-m68k/u-boot.h
+++ b/include/asm-m68k/u-boot.h
@@ -38,10 +38,11 @@
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
+ unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_boot_params; /* where this board expects params */
+ unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -49,21 +50,5 @@
} bd_t;
#endif /* __ASSEMBLY__ */
-/* The following data structure is placed in DPRAM to allow for a
- * minimum set of global variables during system initialization
- * (until we have set up the memory controller so that we can use
- * RAM).
- *
- * Keep it *SMALL* and remember to set CFG_INIT_DATA_SIZE > sizeof(init_data_t)
- */
-typedef struct init_data {
- unsigned long cpu_clk; /* VCOOUT = CPU clock in Hz! */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long relocated; /* Relocat. offset when running in RAM */
- unsigned long have_console; /* serial_init() was called */
-#ifdef CONFIG_LCD
- unsigned long lcd_base; /* Base address of LCD frambuffer mem */
-#endif
-} init_data_t;
+
#endif /* __U_BOOT_H__ */
diff --git a/include/common.h b/include/common.h
index fed04a9..df58008 100644
--- a/include/common.h
+++ b/include/common.h
@@ -397,9 +397,10 @@
#if defined(CONFIG_8xx) || defined(CONFIG_8260)
void cpu_init_f (volatile immap_t *immr);
#endif
-#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx)
+#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2)
void cpu_init_f (void);
#endif
+
int cpu_init_r (void);
#if defined(CONFIG_8260)
int prt_8260_rsr (void);
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 8d200f3..5fd6a95 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -1,40 +1,189 @@
-#ifndef _CONFIG_M5272C3_H
-#define _CONFIG_M5272C3_H
+/*
+ * Configuation settings for the Motorola MC5272C3 board.
+ *
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
-#include <cmd_confdefs.h>
-#define CONFIG_BOOTDELAY 5
+/*
+ * board/config.h - configuration options, board specific
+ */
-#define CFG_MAX_FLASH_SECT 11
-#define CFG_CACHELINE_SIZE 16
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_SIZE 0x1000
-#define CFG_INIT_DATA_OFFSET 0
-#define CONFIG_BAUDRATE 19200
-#define CFG_MONITOR_BASE 0x3e0000
-#define CFG_MONITOR_LEN 0x20000
-#define CFG_SDRAM_BASE 0
-#define CFG_FLASH_BASE 0xffe00000
-#define CFG_PROMPT "MCF5272C3> "
-#define CFG_CBSIZE 1024
-#define CFG_MAXARGS 64
-#define CFG_LOAD_ADDR 0x20000
-#define CFG_BOOTMAPSZ 0
-#define CFG_BARGSIZE CFG_CBSIZE
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
-#define CFG_ENV_ADDR 0xffe04000
-#define CFG_ENV_SIZE 0x2000
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_PBSIZE 1024
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
-#define CFG_HZ 1000000
-#define CFG_FLASH_ERASE_TOUT 10000000
+#ifndef _M5272C3_H
+#define _M5272C3_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF52x2 /* define processor family */
+#define CONFIG_M5272 /* define processor type */
#define FEC_ENET
+#define CONFIG_BAUDRATE 19200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */
+
+#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_ENV_OFFSET 0x4000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_EMBEDDED 1
+#else
+#define CFG_ENV_ADDR 0xffe04000
+#define CFG_ENV_SECT_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+#endif
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) | \
+ CFG_CMD_MII)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#define CONFIG_BOOTDELAY 5
+
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_LOAD_ADDR 0x20000
+
+#define CFG_MEMTEST_START 0x400
+#define CFG_MEMTEST_END 0x380000
+
+#define CFG_HZ 1000
+#define CFG_CLK 66000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_MBAR 0x10000000 /* Register Base Addrs */
+
-#define CONFIG_M5272
+#define CFG_SCR 0x0003;
+#define CFG_SPR 0xffff;
+
+#define CFG_DISCOVER_PHY
+#define CFG_ENET_BD_BASE 0x380000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x20000000
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */
+#define CFG_FLASH_BASE 0xffe00000
+
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_MONITOR_BASE 0x20000
+#else
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#endif
+
+#define CFG_MONITOR_LEN 0x20000
+#define CFG_MALLOC_LEN (256 << 10)
+#define CFG_BOOTPARAMS_LEN 64*1024
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 1000
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+#define CFG_BR0_PRELIM 0xFFE00201
+#define CFG_OR0_PRELIM 0xFFE00014
+
+#define CFG_BR1_PRELIM 0
+#define CFG_OR1_PRELIM 0
+
+#define CFG_BR2_PRELIM 0x30000001
+#define CFG_OR2_PRELIM 0xFFF80000
+
+#define CFG_BR3_PRELIM 0
+#define CFG_OR3_PRELIM 0
+
+#define CFG_BR4_PRELIM 0
+#define CFG_OR4_PRELIM 0
+
+#define CFG_BR5_PRELIM 0
+#define CFG_OR5_PRELIM 0
+
+#define CFG_BR6_PRELIM 0
+#define CFG_OR6_PRELIM 0
+
+#define CFG_BR7_PRELIM 0x00000701
+#define CFG_OR7_PRELIM 0xFFC0007C
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
+#define CFG_PACNT 0x00000000
+#define CFG_PADDR 0x0000
+#define CFG_PADAT 0x0000
+#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */
+#define CFG_PBDDR 0x0000
+#define CFG_PBDAT 0x0000
+#define CFG_PDCNT 0x00000000
-#endif /* _CONFIG_M5272C3_H */
+#endif /* _M5272C3_H */
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index bbac7d1..cbb3e3b 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -1,40 +1,151 @@
+/*
+ * Configuation settings for the Motorola MC5282EVB board.
+ *
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
#ifndef _CONFIG_M5282EVB_H
#define _CONFIG_M5282EVB_H
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
-#include <cmd_confdefs.h>
-#define CONFIG_BOOTDELAY 5
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF52x2 /* define processor family */
+#define CONFIG_M5282 /* define processor type */
-#define CFG_MAX_FLASH_SECT 35
-#define CFG_CACHELINE_SIZE 16
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_SIZE 0x1000
-#define CFG_INIT_DATA_OFFSET 0
+#define FEC_ENET
+
#define CONFIG_BAUDRATE 19200
-#define CFG_MONITOR_BASE 0x3e0000
-#define CFG_MONITOR_LEN 0x20000
-#define CFG_SDRAM_BASE 0
-#define CFG_FLASH_BASE 0xffe00000
-#define CFG_PROMPT "M5282EVB> "
-#define CFG_CBSIZE 1024
-#define CFG_MAXARGS 64
-#define CFG_LOAD_ADDR 0x20000
-#define CFG_BOOTMAPSZ 0
-#define CFG_BARGSIZE CFG_CBSIZE
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
-#define CFG_ENV_ADDR 0xffe04000
-#define CFG_ENV_SIZE 0x2000
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_PBSIZE 1024
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MEMTEST_START 0x400
-#define CFG_MEMTEST_END 0x380000
-#define CFG_HZ 1000000
-#define CFG_FLASH_ERASE_TOUT 10000000
-#define FEC_ENET
+#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_ADDR 0xffe04000
+#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_IS_IN_FLASH 1
+
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#define CONFIG_BOOTDELAY 5
+
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_LOAD_ADDR 0x20000
+
+#define CFG_MEMTEST_START 0x400
+#define CFG_MEMTEST_END 0x380000
+
+#define CFG_HZ 1000000
+#define CFG_CLK 64000000
+
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+#define CFG_MBAR 0x40000000
+
+#undef CFG_DISCOVER_PHY
+#define CFG_ENET_BD_BASE 0x380000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x20000000
+#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */
+#define CFG_FLASH_BASE 0xffe00000
+#define CFG_INT_FLASH_BASE 0xf0000000
+
+/* If M5282 port is fully implemented the monitor base will be behind
+ * the vector table. */
+/* #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) */
+#define CFG_MONITOR_BASE 0x20000
+
+#define CFG_MONITOR_LEN 0x20000
+#define CFG_MALLOC_LEN (256 << 10)
+#define CFG_BOOTPARAMS_LEN 64*1024
+
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_SECT 35
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_FLASH_ERASE_TOUT 10000000
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
-#define CONFIG_M5282
#endif /* _CONFIG_M5282EVB_H */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 580b590..8fc7c30 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -445,6 +445,7 @@
*/
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
diff --git a/include/flash.h b/include/flash.h
index 0cfc76d..bda11d5 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -44,6 +44,7 @@
ulong buffer_write_tout; /* maximum buffer write timeout */
ushort vendor; /* the primary vendor id */
ushort cmd_reset; /* Vendor specific reset command */
+ ushort interface; /* used for x8/x16 adjustments */
#endif
} flash_info_t;
@@ -61,6 +62,14 @@
#define FLASH_CFI_BY16 0x02
#define FLASH_CFI_BY32 0x04
#define FLASH_CFI_BY64 0x08
+/* convert between bit value and numeric value */
+#define CFI_FLASH_SHIFT_WIDTH 3
+/*
+ * Values for the flash device interface
+ */
+#define FLASH_CFI_X8 0x00
+#define FLASH_CFI_X16 0x01
+#define FLASH_CFI_X8X16 0x02
/* convert between bit value and numeric value */
#define CFI_FLASH_SHIFT_WIDTH 3
@@ -185,6 +194,7 @@
#define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */
#define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */
+#define FUJI_ID_29LV650UE 0x22d722d7 /* MBM29LV650UE/651UE ID (8M = 128 x 32kWord) */
#define SST_ID_xF200A 0x27892789 /* 39xF200A ID ( 2M = 128K x 16 ) */
#define SST_ID_xF400A 0x27802780 /* 39xF400A ID ( 4M = 256K x 16 ) */
@@ -340,6 +350,8 @@
#define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */
#define FLASH_AMDL163B 0x00B3
+#define FLASH_FUJLV650 0x00B4 /* Fujitsu MBM 29LV650UE/651UE */
+
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
diff --git a/cpu/coldfire/Makefile b/lib_m68k/Makefile
similarity index 76%
copy from cpu/coldfire/Makefile
copy to lib_m68k/Makefile
index 3976f56..698da36 100644
--- a/cpu/coldfire/Makefile
+++ b/lib_m68k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,19 @@
include $(TOPDIR)/config.mk
-# CFLAGS += -DET_DEBUG
+LIB = lib$(ARCH).a
-LIB = lib$(CPU).a
+AOBJS =
+COBJS = cache.o traps.o time.o board.o m68k_linux.o
+OBJS = $(AOBJS) $(COBJS)
-START =
-OBJS = kgdb.o serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
-
-all: .depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS) kgdb.o
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
sinclude .depend
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 0bf637d..06b3bd5 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -1,5 +1,8 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2003
+ * Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -26,7 +29,11 @@
#include <command.h>
#include <malloc.h>
#include <devices.h>
-#include <syscall.h>
+
+#ifdef CONFIG_M5272
+#include <asm/immap_5272.h>
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_IDE)
#include <ide.h>
#endif
@@ -54,18 +61,8 @@
extern flash_info_t flash_info[];
#endif
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef CFG_ENV_ADDR
-# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
-# endif
-# ifndef CFG_ENV_SIZE
-# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
-# endif
-# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
- (CFG_ENV_ADDR+CFG_ENV_SIZE) < (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-# define ENV_IS_EMBEDDED
-# endif
-#endif /* CFG_ENV_IS_IN_FLASH */
+#include <environment.h>
+
#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
(CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
defined(CFG_ENV_IS_IN_NVRAM)
@@ -74,12 +71,30 @@
#define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
#endif
+extern ulong __init_end;
+extern ulong _end;
+
+extern void timer_init(void);
+
+#if defined(CONFIG_WATCHDOG)
+# define INIT_FUNC_WATCHDOG_INIT watchdog_init,
+# define WATCHDOG_DISABLE watchdog_disable
+
+extern int watchdog_init(void);
+extern int watchdog_disable(void);
+#else
+# define INIT_FUNC_WATCHDOG_INIT /* undef */
+# define WATCHDOG_DISABLE /* undef */
+#endif /* CONFIG_WATCHDOG */
+
+ulong monitor_flash_len;
+
/*
* Begin and End of memory area for malloc(), and current "brk"
*/
-static ulong mem_malloc_start = 0;
-static ulong mem_malloc_end = 0;
-static ulong mem_malloc_brk = 0;
+static ulong mem_malloc_start = 0;
+static ulong mem_malloc_end = 0;
+static ulong mem_malloc_brk = 0;
/************************************************************************
* Utilities *
@@ -89,13 +104,18 @@
/*
* The Malloc area is immediately below the monitor copy in DRAM
*/
-static void mem_malloc_init (ulong dest_addr)
+static void mem_malloc_init (void)
{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+
mem_malloc_end = dest_addr;
mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
- memset ((void *) mem_malloc_start, 0,
+ memset ((void *) mem_malloc_start,
+ 0,
mem_malloc_end - mem_malloc_start);
}
@@ -104,50 +124,106 @@
ulong old = mem_malloc_brk;
ulong new = old + increment;
- if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+ if ((new < mem_malloc_start) ||
+ (new > mem_malloc_end) ) {
return (NULL);
}
mem_malloc_brk = new;
- return ((void *) old);
+ return ((void *)old);
}
-char *strmhz (char *buf, long hz)
+char *strmhz(char *buf, long hz)
{
- long l, n;
- long m;
+ long l, n;
+ long m;
- n = hz / 1000000L;
+ n = hz / 1000000L;
- l = sprintf (buf, "%ld", n);
+ l = sprintf (buf, "%ld", n);
- m = (hz % 1000000L) / 1000L;
+ m = (hz % 1000000L) / 1000L;
- if (m != 0)
- sprintf (buf + l, ".%03ld", m);
+ if (m != 0)
+ sprintf (buf+l, ".%03ld", m);
- return (buf);
+ return (buf);
}
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+/************************************************************************
+ * Init Utilities *
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * but let's get it working (again) first...
+ */
+
-static void syscalls_init (int reloc_off)
+static int init_baudrate (void)
{
- ulong *addr;
+ DECLARE_GLOBAL_DATA_PTR;
+
+ uchar tmp[64]; /* long enough for environment variables */
+ int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+ gd->baudrate = (i > 0)
+ ? (int) simple_strtoul (tmp, NULL, 10)
+ : CONFIG_BAUDRATE;
+ return (0);
+}
- addr = (ulong *) syscall_tbl;
- syscall_tbl[SYSCALL_MALLOC] = (void *) malloc;
- syscall_tbl[SYSCALL_FREE] = (void *) free;
+/***********************************************************************/
- syscall_tbl[SYSCALL_INSTALL_HDLR] = (void *) irq_install_handler;
- syscall_tbl[SYSCALL_FREE_HDLR] = (void *) irq_free_handler;
+static int init_func_ram (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
- addr = (ulong *) 0xc00; /* syscall ISR addr */
+ int board_type = 0; /* use dummy arg */
+ puts ("DRAM: ");
- /* patch ISR code */
- *addr++ |= (ulong) syscall_tbl >> 16;
- *addr++ |= (ulong) syscall_tbl & 0xFFFF;
- *addr++ |= NR_SYSCALLS >> 16;
- *addr++ |= NR_SYSCALLS & 0xFFFF;
+ if ((gd->ram_size = initdram (board_type)) > 0) {
+ print_size (gd->ram_size, "\n");
+ return (0);
+ }
+ puts (failed);
+ return (1);
}
+/***********************************************************************/
+
+/************************************************************************
+ * Initialization sequence *
+ ************************************************************************
+ */
+
+init_fnc_t *init_sequence[] = {
+ env_init,
+ init_baudrate,
+ serial_init,
+ console_init_f,
+ display_options,
+ checkcpu,
+ checkboard,
+ init_func_ram,
+#if defined(CFG_DRAM_TEST)
+ testdram,
+#endif /* CFG_DRAM_TEST */
+ INIT_FUNC_WATCHDOG_INIT
+ NULL, /* Terminate this list */
+};
+
+
/************************************************************************
*
* This is the first part of the initialization sequence that is
@@ -164,132 +240,146 @@
************************************************************************
*/
-
-gd_t *global_data;
-static gd_t gdata;
-static bd_t bdata;
-
-void board_init_f (ulong bootflag)
+void
+board_init_f (ulong bootflag)
{
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
bd_t *bd;
- ulong reg, len, addr, addr_sp, dram_size;
- int i, baudrate, board_type;
- char *s, *e;
+ ulong len, addr, addr_sp;
+ gd_t *id;
+ init_fnc_t **init_fnc_ptr;
+#ifdef CONFIG_PRAM
+ int i;
+ ulong reg;
uchar tmp[64]; /* long enough for environment variables */
-
- /* Pointer to initial global data area */
- gd = global_data = &gdata;
- bd = gd->bd = &bdata;
-
- init_timebase ();
- env_init ();
-
- i = getenv_r ("baudrate", tmp, sizeof (tmp));
- baudrate =
- (i > 0) ? (int) simple_strtoul (tmp, NULL,
- 10) : CONFIG_BAUDRATE;
- bd->bi_baudrate = baudrate; /* Console Baudrate */
-
- /* set up serial port */
- serial_init ();
-
- /* Initialize the console (before the relocation) */
- console_init_f ();
-
-#ifdef DEBUG
- if (sizeof (init_data_t) > CFG_INIT_DATA_SIZE) {
- printf ("PANIC: sizeof(init_data_t)=%d > CFG_INIT_DATA_SIZE=%d\n", sizeof (init_data_t), CFG_INIT_DATA_SIZE);
- hang ();
- }
-#endif /* DEBUG */
-
- /* now we can use standard printf/puts/getc/tstc functions */
- display_options ();
-
- puts ("CPU: "); /* Check CPU */
- if (checkcpu () < 0) {
- puts (failed);
- hang ();
- }
+#endif
- puts ("Board: "); /* Check Board */
- if ((board_type = checkboard ()) < 0) {
- puts (failed);
- hang ();
- }
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
- puts ("DRAM: ");
- if ((dram_size = initdram (board_type)) > 0) {
- printf ("%2ld MB\n", dram_size >> 20);
- } else {
- puts (failed);
- hang ();
- }
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
-#if defined(CFG_DRAM_TEST)
- if (testdram () != 0) {
- hang ();
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+ if ((*init_fnc_ptr)() != 0) {
+ hang ();
+ }
}
-#endif /* CFG_DRAM_TEST */
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
*
* Reserve memory at end of RAM for (top down in that order):
- * - protected RAM
- * - LCD framebuffer
- * - monitor code
- * - board info struct
+ * - protected RAM
+ * - LCD framebuffer
+ * - monitor code
+ * - board info struct
*/
- len = get_endaddr () - CFG_MONITOR_BASE;
+ len = (ulong)&_end - CFG_MONITOR_BASE;
- if (len > CFG_MONITOR_LEN) {
- printf ("*** u-boot size %ld > reserved memory (%d)\n",
- len, CFG_MONITOR_LEN);
- hang ();
- }
+ addr = CFG_SDRAM_BASE + gd->ram_size;
- if (CFG_MONITOR_LEN > len)
- len = CFG_MONITOR_LEN;
+#ifdef CONFIG_LOGBUFFER
+ /* reserve kernel log buffer */
+ addr -= (LOGBUFF_RESERVE);
+ debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+#endif
+
+#ifdef CONFIG_PRAM
+ /*
+ * reserve protected RAM
+ */
+ i = getenv_r ("pram", tmp, sizeof (tmp));
+ reg = (i > 0) ? simple_strtoul (tmp, NULL, 10) : CONFIG_PRAM;
+ addr -= (reg << 10); /* size is in kB */
+ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+#endif /* CONFIG_PRAM */
- addr = CFG_SDRAM_BASE + dram_size;
+ /*
+ * reserve memory for U-Boot code, data & bss
+ * round down to next 4 kB limit
+ */
addr -= len;
+ addr &= ~(4096 - 1);
+
+ debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
/*
- * Save local variables to board info struct
+ * reserve memory for malloc() arena
*/
- bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
- bd->bi_memsize = dram_size; /* size of DRAM memory in bytes */
- bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
+ addr_sp = addr - TOTAL_MALLOC_LEN;
+ debug ("Reserving %dk for malloc() at: %08lx\n",
+ TOTAL_MALLOC_LEN >> 10, addr_sp);
- i = getenv_r ("ethaddr", tmp, sizeof (tmp));
- s = (i > 0) ? tmp : NULL;
+ /*
+ * (permanently) allocate a Board Info struct
+ * and a permanent copy of the "global" data
+ */
+ addr_sp -= sizeof (bd_t);
+ bd = (bd_t *) addr_sp;
+ gd->bd = bd;
+ debug ("Reserving %d Bytes for Board Info at: %08lx\n",
+ sizeof (bd_t), addr_sp);
+ addr_sp -= sizeof (gd_t);
+ id = (gd_t *) addr_sp;
+ debug ("Reserving %d Bytes for Global Data at: %08lx\n",
+ sizeof (gd_t), addr_sp);
- for (reg = 0; reg < 6; ++reg) {
- bd->bi_enetaddr[reg] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ /* Reserve memory for boot params. */
+ addr_sp -= CFG_BOOTPARAMS_LEN;
+ bd->bi_boot_params = addr_sp;
+ debug ("Reserving %dk for boot parameters at: %08lx\n",
+ CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+
+ /*
+ * Finally, we set up a new (bigger) stack.
+ *
+ * Leave some safety gap for SP, force alignment on 16 byte boundary
+ * Clear initial stack frame
+ */
+ addr_sp -= 16;
+ addr_sp &= ~0xF;
+ *((ulong *) addr_sp)-- = 0;
+ *((ulong *) addr_sp)-- = 0;
+ debug ("Stack Pointer at: %08lx\n", addr_sp);
+
+ /*
+ * Save local variables to board info struct
+ */
+ bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
+ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
+ bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
+
+ bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
- bd->bi_intfreq = get_gclk_freq (); /* Internal Freq, in Hz */
- bd->bi_busfreq = get_bus_freq (get_gclk_freq ()); /* Bus Freq, in Hz */
+ WATCHDOG_RESET ();
+ bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
+ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
+ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifdef CFG_EXTBDINFO
strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
- strncpy (bd->bi_r_version, PPCBOOT_VERSION,
- sizeof (bd->bi_r_version));
+ strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
+#endif
+
+ WATCHDOG_RESET ();
- bd->bi_procfreq = get_gclk_freq (); /* Processor Speed, In Hz */
- bd->bi_plb_busfreq = bd->bi_busfreq;
+#ifdef CONFIG_POST
+ post_bootmode_init();
+ post_run (NULL, POST_ROM | post_bootmode_get(0));
#endif
- board_init_final (addr);
+ WATCHDOG_RESET();
-}
+ memcpy (id, (void *)gd, sizeof (gd_t));
+ debug ("Start relocate of code from %08x to %08lx\n", CFG_MONITOR_BASE, addr);
+ relocate_code (addr_sp, id, addr);
+
+ /* NOTREACHED - jump_to_ram() does not return */
+}
/************************************************************************
*
@@ -300,61 +390,123 @@
*
************************************************************************
*/
-
-void board_init_final (ulong dest_addr)
+void board_init_r (gd_t *id, ulong dest_addr)
{
DECLARE_GLOBAL_DATA_PTR;
- char *s;
cmd_tbl_t *cmdtp;
- ulong flash_size;
+ char *s, *e;
bd_t *bd;
+ int i;
+ extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+ extern char * env_name_spec;
+#endif
+#ifndef CFG_NO_FLASH
+ ulong flash_size;
+#endif
+ gd = id; /* initialize RAM version of global data */
bd = gd->bd;
- /* icache_enable(); /XX* it's time to enable the instruction cache */
+
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+
+ debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
+ WATCHDOG_RESET ();
+
+ gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+ monitor_flash_len = (ulong)&__init_end - dest_addr;
/*
+ * We have to relocate the command table manually
+ */
+ for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ ulong addr;
+ addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+ printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+ cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+ cmdtp->cmd =
+ (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+ addr = (ulong)(cmdtp->name) + gd->reloc_off;
+ cmdtp->name = (char *)addr;
+
+ if (cmdtp->usage) {
+ addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+ cmdtp->usage = (char *)addr;
+ }
+#ifdef CFG_LONGHELP
+ if (cmdtp->help) {
+ addr = (ulong)(cmdtp->help) + gd->reloc_off;
+ cmdtp->help = (char *)addr;
+ }
+#endif
+ }
+ /* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+ env_name_spec += gd->reloc_off;
+#endif
+
+ WATCHDOG_RESET ();
+
+#ifdef CONFIG_LOGBUFFER
+ logbuff_init_ptrs ();
+#endif
+#ifdef CONFIG_POST
+ post_output_backlog ();
+ post_reloc ();
+#endif
+ WATCHDOG_RESET();
+
+#if 0
+ /* instruction cache enabled in cpu_init_f() for faster relocation */
+ icache_enable (); /* it's time to enable the instruction cache */
+#endif
+
+ /*
* Setup trap handlers
*/
- trap_init (dest_addr);
+ trap_init (0);
+#if !defined(CFG_NO_FLASH)
puts ("FLASH: ");
if ((flash_size = flash_init ()) > 0) {
-#ifdef CFG_FLASH_CHECKSUM
- if (flash_size >= (1 << 20)) {
- printf ("%2ld MB", flash_size >> 20);
- } else {
- printf ("%2ld kB", flash_size >> 10);
- }
+# ifdef CFG_FLASH_CHECKSUM
+ print_size (flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
- * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
s = getenv ("flashchecksum");
if (s && (*s == 'y')) {
printf (" CRC: %08lX",
- crc32 (0,
- (const unsigned char *) CFG_FLASH_BASE,
- flash_size)
- );
+ crc32 (0,
+ (const unsigned char *) CFG_FLASH_BASE,
+ flash_size)
+ );
}
putc ('\n');
-#else
- if (flash_size >= (1 << 20)) {
- printf ("%2ld MB\n", flash_size >> 20);
- } else {
- printf ("%2ld kB\n", flash_size >> 10);
- }
-#endif /* CFG_FLASH_CHECKSUM */
+# else /* !CFG_FLASH_CHECKSUM */
+ print_size (flash_size, "\n");
+# endif /* CFG_FLASH_CHECKSUM */
} else {
puts (failed);
hang ();
}
- bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
- bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
- bd->bi_flashoffset = 0x10000; /* reserved area for startup monitor */
+ bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
+ bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
+ bd->bi_flashoffset = 0;
+#else /* CFG_NO_FLASH */
+ bd->bi_flashsize = 0;
+ bd->bi_flashstart = 0;
+ bd->bi_flashoffset = 0;
+#endif /* !CFG_NO_FLASH */
WATCHDOG_RESET ();
@@ -364,7 +516,8 @@
WATCHDOG_RESET ();
/* initialize malloc() area */
- mem_malloc_init (dest_addr);
+ mem_malloc_init ();
+ malloc_bin_reloc ();
#ifdef CONFIG_SPI
# if !defined(CFG_ENV_IS_IN_EEPROM)
@@ -376,36 +529,35 @@
/* relocate environment function pointers etc. */
env_relocate ();
+ /*
+ * Fill in missing fields of bd_info.
+ * We do this here, where we have "normal" access to the
+ * environment; we used to do this still running from ROM,
+ * where had to use getenv_r(), which can be pretty slow when
+ * the environment is in EEPROM.
+ */
+ s = getenv ("ethaddr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
- /* allocate syscalls table (console_init_r will fill it in */
- syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
-
- /* Initialize the console (after the relocation and devices init) */
+ /** leave this here (after malloc(), environment and PCI are working) **/
+ /* Initialize devices */
+ devices_init ();
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
- defined(CONFIG_CCM) || \
- defined(CONFIG_EP8260) || \
- defined(CONFIG_IP860) || \
- defined(CONFIG_IVML24) || \
- defined(CONFIG_IVMS8) || \
- defined(CONFIG_LWMON) || \
- defined(CONFIG_MPC8260ADS) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_RPXSUPER) || \
- defined(CONFIG_SPD823TS) )
+ /* Initialize the jump table for applications */
+ jumptable_init ();
- WATCHDOG_RESET ();
-# ifdef DEBUG
- puts ("Reset Ethernet PHY\n");
-# endif
- reset_phy ();
-#endif
-
+ /* Initialize the console (after the relocation and devices init) */
+ console_init_r ();
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
WATCHDOG_RESET ();
@@ -413,11 +565,28 @@
kgdb_init ();
#endif
+ debug ("U-Boot relocated to %08lx\n", dest_addr);
+
/*
* Enable Interrupts
*/
interrupt_init ();
+
+ /* Must happen after interrupts are initialized since
+ * an irq handler gets installed
+ */
+ timer_init();
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+ serial_buffered_init();
+#endif
+
+#ifdef CONFIG_STATUS_LED
+ status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
udelay (20);
+
set_timer (0);
/* Insert function pointers now that we have relocated the code */
@@ -432,12 +601,27 @@
}
#endif /* CFG_CMD_NET */
+ WATCHDOG_RESET ();
+
+#if (CONFIG_COMMANDS & CFG_CMD_DOC)
WATCHDOG_RESET ();
+ puts ("DOC: ");
+ doc_init ();
+#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
WATCHDOG_RESET ();
- puts ("Net: ");
- eth_initialize (bd);
+ puts ("NAND:");
+ nand_init(); /* go init the NAND */
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+ WATCHDOG_RESET();
+ eth_init(bd);
+#endif
+
+#ifdef CONFIG_POST
+ post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
#ifdef CONFIG_LAST_STAGE_INIT
@@ -455,26 +639,51 @@
bedbug_init ();
#endif
-#ifdef CONFIG_PRAM
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
/*
* Export available size of memory for Linux,
* taking into account the protected RAM at top of memory
*/
{
ulong pram;
- char *s;
uchar memsz[32];
+#ifdef CONFIG_PRAM
+ char *s;
if ((s = getenv ("pram")) != NULL) {
pram = simple_strtoul (s, NULL, 10);
} else {
pram = CONFIG_PRAM;
}
+#else
+ pram=0;
+#endif
+#ifdef CONFIG_LOGBUFFER
+ /* Also take the logbuffer into account (pram is in kB) */
+ pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+#endif
sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
setenv ("mem", memsz);
}
#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ {
+ extern int do_mdm_init;
+ do_mdm_init = gd->do_mdm_init;
+ }
+#endif
+
+#ifdef CONFIG_WATCHDOG
+ /* disable watchdog if environment is set */
+ if ((s = getenv ("watchdog")) != NULL) {
+ if (strncmp (s, "off", 3) == 0) {
+ WATCHDOG_DISABLE ();
+ }
+ }
+#endif /* CONFIG_WATCHDOG*/
+
+
/* Initialization complete - start the monitor */
/* main_loop() can return to retry autoboot, if so just run it again. */
@@ -486,7 +695,8 @@
/* NOTREACHED - no way out of command loop except booting */
}
-void hang (void)
+
+void hang(void)
{
puts ("### ERROR ### Please RESET the board ###\n");
for (;;);
diff --git a/cpu/coldfire/speed.c b/lib_m68k/cache.c
similarity index 85%
rename from cpu/coldfire/speed.c
rename to lib_m68k/cache.c
index 0fe0925..84fb6c2 100644
--- a/cpu/coldfire/speed.c
+++ b/lib_m68k/cache.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -22,14 +22,8 @@
*/
#include <common.h>
-#include <asm/processor.h>
-ulong get_gclk_freq (void)
-{
- return 0;
-}
-
-ulong get_bus_freq (ulong gclk_freq)
+void flush_cache (ulong start_addr, ulong size)
{
- return 0;
+ /* Must be implemented for all M68k processors with copy-back data cache */
}
diff --git a/lib_m68k/extable.c b/lib_m68k/extable.c
deleted file mode 100644
index afbc1eb..0000000
--- a/lib_m68k/extable.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern const struct exception_table_entry __start___ex_table[];
-extern const struct exception_table_entry __stop___ex_table[];
-
-static inline unsigned long
-search_one_table (const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
-{
- while (first <= last) {
- const struct exception_table_entry *mid;
- long diff;
-
- mid = (last - first) / 2 + first;
- diff = mid->insn - value;
- if (diff == 0)
- return mid->fixup;
- else if (diff < 0)
- first = mid + 1;
- else
- last = mid - 1;
- }
- return 0;
-}
-
-int ex_tab_message = 1;
-
-unsigned long search_exception_table (unsigned long addr)
-{
- unsigned long ret;
-
- /* There is only the kernel to search. */
- ret = search_one_table (__start___ex_table, __stop___ex_table - 1,
- addr);
- if (ex_tab_message)
- printf ("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
- if (ret)
- return ret;
-
- return 0;
-}
diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c
index b20393d..a32de1a 100644
--- a/lib_m68k/m68k_linux.c
+++ b/lib_m68k/m68k_linux.c
@@ -12,26 +12,25 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
#include <command.h>
-#include <cmd_boot.h>
#include <image.h>
#include <zlib.h>
#include <asm/byteorder.h>
#define PHYSADDR(x) x
-#define LINUX_MAX_ENVS 256
-#define LINUX_MAX_ARGS 256
+#define LINUX_MAX_ENVS 256
+#define LINUX_MAX_ARGS 256
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
@@ -42,6 +41,8 @@
extern image_header_t header; /* from cmd_bootm.c */
+extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+
static int linux_argc;
static char **linux_argv;
@@ -52,7 +53,6 @@
static void linux_params_init (ulong start, char *commandline);
static void linux_env_set (char *env_name, char *env_val);
-
void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong * len_ptr, int verify)
{
@@ -123,9 +123,9 @@
SHOW_BOOT_PROGRESS (11);
if ((hdr->ih_os != IH_OS_LINUX) ||
- (hdr->ih_arch != IH_CPU_MIPS) ||
+ (hdr->ih_arch != IH_CPU_M68K) ||
(hdr->ih_type != IH_TYPE_RAMDISK)) {
- printf ("No Linux MIPS Ramdisk Image\n");
+ printf ("No Linux M68K Ramdisk Image\n");
SHOW_BOOT_PROGRESS (-13);
do_reset (cmdtp, flag, argc, argv);
}
diff --git a/lib_m68k/time.c b/lib_m68k/time.c
index 5fc2751..0b85411 100644
--- a/lib_m68k/time.c
+++ b/lib_m68k/time.c
@@ -1,5 +1,7 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -12,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -23,65 +25,149 @@
#include <common.h>
+#include <asm/mcftimer.h>
+
+#ifdef CONFIG_M5272
+#include <asm/m5272.h>
+#include <asm/immap_5272.h>
+#endif
+
+#ifdef CONFIG_M5282
+#include <asm/m5282.h>
+#endif
-/* ------------------------------------------------------------------------- */
+static ulong timestamp;
+#ifdef CONFIG_M5282
+static unsigned short lastinc;
+#endif
+
+
+#if defined(CONFIG_M5272)
/*
- * This function is intended for SHORT delays only.
- * It will overflow at around 10 seconds @ 400MHz,
- * or 20 seconds @ 200MHz.
+ * We use timer 3 which is running with a period of 1 us
*/
-unsigned long usec2ticks(unsigned long usec)
+void udelay(unsigned long usec)
{
- ulong ticks;
+ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE3);
+ uint start, now, tmp;
+
+ while (usec > 0) {
+ if (usec > 65000)
+ tmp = 65000;
+ else
+ tmp = usec;
+ usec = usec - tmp;
+
+ /* Set up TIMER 3 as timebase clock */
+ timerp->timer_tmr = MCFTIMER_TMR_DISABLE;
+ timerp->timer_tcn = 0;
+ /* set period to 1 us */
+ timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
+ MCFTIMER_TMR_FREERUN | MCFTIMER_TMR_ENABLE;
+
+ start = now = timerp->timer_tcn;
+ while (now < start + tmp)
+ now = timerp->timer_tcn;
+ }
+}
+
+void mcf_timer_interrupt (void * not_used){
+ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4);
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
- if (usec < 1000) {
- ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
- } else {
- ticks = ((usec / 10) * (get_tbclk() / 100000));
+ /* check for timer 4 interrupts */
+ if ((intp->int_isr & 0x01000000) != 0) {
+ return;
}
- return (ticks);
+ /* reset timer */
+ timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
+ timestamp ++;
}
-/* ------------------------------------------------------------------------- */
+void timer_init (void) {
+ volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4);
+ volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1);
-/*
- * We implement the delay by converting the delay (the number of
- * microseconds to wait) into a number of time base ticks; then we
- * watch the time base until it has incremented by that amount.
- */
-void udelay(unsigned long usec)
+ timestamp = 0;
+
+ /* Set up TIMER 4 as clock */
+ timerp->timer_tmr = MCFTIMER_TMR_DISABLE;
+
+ /* initialize and enable timer 4 interrupt */
+ irq_install_handler (72, mcf_timer_interrupt, 0);
+ intp->int_icr1 |= 0x0000000d;
+
+ timerp->timer_tcn = 0;
+ timerp->timer_trr = 1000; /* Interrupt every ms */
+ /* set a period of 1us, set timer mode to restart and enable timer and interrupt */
+ timerp->timer_tmr = (((CFG_CLK / 1000000) - 1) << 8) | MCFTIMER_TMR_CLK1 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE;
+}
+
+void reset_timer (void)
{
- ulong ticks = usec2ticks (usec);
+ timestamp = 0;
+}
- wait_ticks (ticks);
+ulong get_timer (ulong base)
+{
+ return (timestamp - base);
}
-/* ------------------------------------------------------------------------- */
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+#endif
+
+#if defined(CONFIG_M5282)
+
+void udelay(unsigned long usec)
+{
+}
-unsigned long ticks2usec(unsigned long ticks)
+void timer_init (void)
{
- ulong tbclk = get_tbclk();
+ volatile unsigned short *timerp;
- /* usec = ticks * 1000000 / tbclk
- * Multiplication would overflow at ~4.2e3 ticks,
- * so we break it up into
- * usec = ( ( ticks * 1000) / tbclk ) * 1000;
- */
- ticks *= 1000L;
- ticks /= tbclk;
- ticks *= 1000L;
+ timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
+ timestamp = 0;
- return ((ulong)ticks);
+ /* Set up TIMER 4 as poll clock */
+ timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW;
+ timerp[MCFTIMER_PMR] = lastinc = 0;
+ timerp[MCFTIMER_PCSR] =
+ (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW;
}
-/* ------------------------------------------------------------------------- */
+void set_timer (ulong t)
+{
+ volatile unsigned short *timerp;
-int init_timebase (void)
+ timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
+ timestamp = 0;
+ timerp[MCFTIMER_PMR] = lastinc = 0;
+}
+
+ulong get_timer (ulong base)
{
- /* FIXME!! */
- return 0;
+ unsigned short now, diff;
+ volatile unsigned short *timerp;
+
+ timerp = (volatile unsigned short *) (CFG_MBAR + MCFTIMER_BASE4);
+ now = timerp[MCFTIMER_PCNTR];
+ diff = -(now - lastinc);
+
+ timestamp += diff;
+ lastinc = now;
+ return timestamp - base;
}
-/* ------------------------------------------------------------------------- */
+void wait_ticks (unsigned long ticks)
+{
+ set_timer (0);
+ while (get_timer (0) < ticks);
+}
+#endif
diff --git a/lib_m68k/traps.c b/lib_m68k/traps.c
new file mode 100644
index 0000000..1ca94dc
--- /dev/null
+++ b/lib_m68k/traps.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2003
+ * Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+
+
+extern void _exc_handler(void);
+extern void _int_handler(void);
+
+static void show_frame(struct pt_regs *fp)
+{
+ printf ("Vector Number: %d Format: %02x Fault Status: %01x\n\n", (fp->vector & 0x3fc) >> 2,
+ fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8));
+ printf ("PC: %08lx SR: %08lx SP: %08lx\n", fp->pc, (long) fp->sr, (long) fp);
+ printf ("D0: %08lx D1: %08lx D2: %08lx D3: %08lx\n",
+ fp->d0, fp->d1, fp->d2, fp->d3);
+ printf ("D4: %08lx D5: %08lx D6: %08lx D7: %08lx\n",
+ fp->d4, fp->d5, fp->d6, fp->d7);
+ printf ("A0: %08lx A1: %08lx A2: %08lx A3: %08lx\n",
+ fp->a0, fp->a1, fp->a2, fp->a3);
+ printf ("A4: %08lx A5: %08lx A6: %08lx\n",
+ fp->a4, fp->a5, fp->a6);
+}
+
+void exc_handler(struct pt_regs *fp) {
+ printf("\n\n*** Unexpected exception ***\n");
+ show_frame (fp);
+ printf("\n*** Please Reset Board! ***\n");
+ for(;;);
+}
+
+void trap_init(ulong value) {
+ unsigned long *vec = (ulong *)value;
+ int i;
+
+ for(i = 2; i < 25; i++) {
+ vec[i] = (unsigned long)_exc_handler;
+ }
+ for(i = 25; i < 32; i++) {
+ vec[i] = (unsigned long)_int_handler;
+ }
+ for(i = 32; i < 64; i++) {
+ vec[i] = (unsigned long)_exc_handler;
+ }
+ for(i = 64; i < 256; i++) {
+ vec[i] = (unsigned long)_int_handler;
+ }
+
+ setvbr(value); /* set vector base register to new table */
+}