fec_mxc: cleanup and factor out MX27 dependencies
general cleanup
move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c
make MX27 specific phy init conditional on CONFIG_MX27
replace call to imx_get_ahbclk with one to imx_get_fecclk
and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h
Signed-off-by: John Rigby <jcrigby@gmail.com>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Fred Fan <fanyefeng@gmail.com>
CC: Tom <Tom.Rix@windriver.com>
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 446076f..e027894 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -162,7 +162,9 @@
* Wake up from sleep if necessary
* Reset PHY, then delay 300ns
*/
+#ifdef CONFIG_MX27
miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_MIPGSR, 0x00FF);
+#endif
miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
PHY_BMCR_RESET);
udelay(1000);
@@ -363,7 +365,8 @@
/*
* Enable FEC-Lite controller
*/
- writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
+ &fec->eth->ecntrl);
miiphy_wait_aneg(edev);
miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR);
@@ -490,7 +493,7 @@
/*
* issue graceful stop command to the FEC transmitter if necessary
*/
- writel(FEC_ECNTRL_RESET | readl(&fec->eth->x_cntrl),
+ writel(FEC_TCNTRL_GTS | readl(&fec->eth->x_cntrl),
&fec->eth->x_cntrl);
debug("eth_halt: wait for stop regs\n");
@@ -498,7 +501,7 @@
* wait for graceful stop to register
*/
while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA)))
- ; /* FIXME ensure time */
+ udelay(1);
/*
* Disable SmartDMA tasks
@@ -510,7 +513,7 @@
* Disable the Ethernet Controller
* Note: this will also reset the BD index counter!
*/
- writel(0, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
fec->rbd_index = 0;
fec->tbd_index = 0;
debug("eth_halt: done\n");
@@ -569,7 +572,7 @@
* wait until frame is sent .
*/
while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) {
- /* FIXME: Timeout */
+ udelay(1);
}
debug("fec_send: status 0x%x index %d\n",
readw(&fec->tbd_base[fec->tbd_index].status),
@@ -688,7 +691,7 @@
fec->xcv_type = MII100;
/* Reset chip. */
- writel(FEC_ECNTRL_RESET, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl);
while (readl(&fec->eth->ecntrl) & 1)
udelay(10);