| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* Tegra2 high-level function multiplexing */ |
| #include <common.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/funcmux.h> |
| #include <asm/arch/pinmux.h> |
| |
| int funcmux_select(enum periph_id id, int config) |
| { |
| int bad_config = config != FUNCMUX_DEFAULT; |
| |
| switch (id) { |
| case PERIPH_ID_UART1: |
| switch (config) { |
| case FUNCMUX_UART1_IRRX_IRTX: |
| pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA); |
| pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PINGRP_IRRX); |
| pinmux_tristate_disable(PINGRP_IRTX); |
| break; |
| case FUNCMUX_UART1_UAA_UAB: |
| pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA); |
| pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PINGRP_UAA); |
| pinmux_tristate_disable(PINGRP_UAB); |
| bad_config = 0; |
| break; |
| case FUNCMUX_UART1_GPU: |
| pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PINGRP_GPU); |
| bad_config = 0; |
| break; |
| } |
| if (!bad_config) { |
| /* |
| * Tegra appears to boot with function UARTA pre- |
| * selected on mux group SDB. If two mux groups are |
| * both set to the same function, it's unclear which |
| * group's pins drive the RX signals into the HW. |
| * For UARTA, SDB certainly overrides group IRTX in |
| * practice. To solve this, configure some alternative |
| * function on SDB to avoid the conflict. Also, tri- |
| * state the group to avoid driving any signal onto it |
| * until we know what's connected. |
| */ |
| pinmux_tristate_enable(PINGRP_SDB); |
| pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3); |
| } |
| break; |
| |
| case PERIPH_ID_UART2: |
| if (config == FUNCMUX_UART2_IRDA) { |
| pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA); |
| pinmux_tristate_disable(PINGRP_UAD); |
| } |
| break; |
| |
| case PERIPH_ID_UART4: |
| if (config == FUNCMUX_UART4_GMC) { |
| pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD); |
| pinmux_tristate_disable(PINGRP_GMC); |
| } |
| break; |
| |
| case PERIPH_ID_DVC_I2C: |
| /* there is only one selection, pinmux_config is ignored */ |
| if (config == FUNCMUX_DVC_I2CP) { |
| pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C); |
| pinmux_tristate_disable(PINGRP_I2CP); |
| } |
| break; |
| |
| case PERIPH_ID_I2C1: |
| /* support pinmux_config of 0 for now, */ |
| if (config == FUNCMUX_I2C1_RM) { |
| pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C); |
| pinmux_tristate_disable(PINGRP_RM); |
| } |
| break; |
| case PERIPH_ID_I2C2: /* I2C2 */ |
| switch (config) { |
| case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */ |
| pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2); |
| /* PTA to HDMI */ |
| pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI); |
| pinmux_tristate_disable(PINGRP_DDC); |
| break; |
| case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */ |
| pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2); |
| /* set DDC_SEL to RSVDx (RSVD2 works for now) */ |
| pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2); |
| pinmux_tristate_disable(PINGRP_PTA); |
| bad_config = 0; |
| break; |
| } |
| break; |
| case PERIPH_ID_I2C3: /* I2C3 */ |
| /* support pinmux_config of 0 for now */ |
| if (config == FUNCMUX_I2C3_DTF) { |
| pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3); |
| pinmux_tristate_disable(PINGRP_DTF); |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC2: |
| if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) { |
| pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2); |
| pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2); |
| |
| pinmux_tristate_disable(PINGRP_DTA); |
| pinmux_tristate_disable(PINGRP_DTD); |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC3: |
| switch (config) { |
| case FUNCMUX_SDMMC3_SDB_SLXA_8BIT: |
| pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3); |
| |
| pinmux_tristate_disable(PINGRP_SLXA); |
| pinmux_tristate_disable(PINGRP_SLXC); |
| pinmux_tristate_disable(PINGRP_SLXD); |
| pinmux_tristate_disable(PINGRP_SLXK); |
| /* fall through */ |
| |
| case FUNCMUX_SDMMC3_SDB_4BIT: |
| pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3); |
| |
| pinmux_tristate_disable(PINGRP_SDB); |
| pinmux_tristate_disable(PINGRP_SDC); |
| pinmux_tristate_disable(PINGRP_SDD); |
| bad_config = 0; |
| break; |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC4: |
| switch (config) { |
| case FUNCMUX_SDMMC4_ATC_ATD_8BIT: |
| pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4); |
| pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4); |
| |
| pinmux_tristate_disable(PINGRP_ATC); |
| pinmux_tristate_disable(PINGRP_ATD); |
| break; |
| |
| case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT: |
| pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4); |
| pinmux_tristate_disable(PINGRP_GME); |
| /* fall through */ |
| |
| case FUNCMUX_SDMMC4_ATB_GMA_4_BIT: |
| pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4); |
| pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4); |
| |
| pinmux_tristate_disable(PINGRP_ATB); |
| pinmux_tristate_disable(PINGRP_GMA); |
| bad_config = 0; |
| break; |
| } |
| break; |
| |
| case PERIPH_ID_KBC: |
| if (config == FUNCMUX_DEFAULT) { |
| enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB, |
| PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE, |
| PINGRP_KBCF}; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(grp); i++) { |
| pinmux_tristate_disable(grp[i]); |
| pinmux_set_func(grp[i], PMUX_FUNC_KBC); |
| pinmux_set_pullupdown(grp[i], PMUX_PULL_UP); |
| } |
| |
| break; |
| } |
| |
| default: |
| debug("%s: invalid periph_id %d", __func__, id); |
| return -1; |
| } |
| |
| if (bad_config) { |
| debug("%s: invalid config %d for periph_id %d", __func__, |
| config, id); |
| return -1; |
| } |
| |
| return 0; |
| } |