ARM: dts: k2*: Rename the k2* files to keystone-k2* files
As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.
Script for the same (and hand modified for Makefile and config
files):
for i in arch/arm/dts/k2*
do
b=`basename $i`;
git mv $i arch/arm/dts/keystone-$b;
sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si]
done
This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename
the k2* files to keystone-k2* files")
[1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/keystone-k2l.dtsi b/arch/arm/dts/keystone-k2l.dtsi
new file mode 100644
index 0000000..d681cab
--- /dev/null
+++ b/arch/arm/dts/keystone-k2l.dtsi
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ /include/ "keystone-k2l-clocks.dtsi"
+
+ uart2: serial@02348400 {
+ compatible = "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348400 0x100>;
+ clocks = <&clkuart2>;
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ uart3: serial@02348800 {
+ compatible = "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348800 0x100>;
+ clocks = <&clkuart3>;
+ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ dspgpio0: keystone_dsp_gpio@02620240 {
+ compatible = "ti,keystone-dsp-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
+
+ dspgpio1: keystone_dsp_gpio@2620244 {
+ compatible = "ti,keystone-dsp-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x244>;
+ };
+
+ dspgpio2: keystone_dsp_gpio@2620248 {
+ compatible = "ti,keystone-dsp-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x248>;
+ };
+
+ dspgpio3: keystone_dsp_gpio@262024c {
+ compatible = "ti,keystone-dsp-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x24c>;
+ };
+
+ mdio: mdio@26200f00 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x26200f00 0x100>;
+ status = "disabled";
+ clocks = <&clkcpgmac>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
+ /include/ "keystone-k2l-netcp.dtsi"
+ };
+};
+
+&spi0 {
+ ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+ ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+ ti,davinci-spi-num-cs = <5>;
+ /* Pin muxed. Enabled and configured by Bootloader */
+ status = "disabled";
+};