i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5
Newer Samsung SoCs (including newer Exynos, ExynosAuto, Google Tensor)
still use these IPs, or slightly newer versions of it.
Make these drivers available on these platforms by guarding
EXYNOS4/EXYNOS5 specific code behind their configs, and using CCF for
clocks on other platforms.
Tested S3C I2C driver on Exynos7885.
This along with extended clock driver should enable S3C I2C on
Exynos850.
Signed-off-by: David Virag <virag.david003@gmail.com>
Tested-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index cba7f84..52067fa 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -650,7 +650,7 @@
config SYS_I2C_S3C24X0
bool "Samsung I2C driver"
- depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && DM_I2C
+ depends on DM_I2C
help
Support for Samsung I2C controller as Samsung SoCs.
diff --git a/drivers/i2c/exynos_hs_i2c.c b/drivers/i2c/exynos_hs_i2c.c
index 189ce6d..fa0d1c8 100644
--- a/drivers/i2c/exynos_hs_i2c.c
+++ b/drivers/i2c/exynos_hs_i2c.c
@@ -9,11 +9,15 @@
#include <dm.h>
#include <i2c.h>
#include <log.h>
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
+#endif
#include <asm/global_data.h>
+#include <asm/io.h>
#include <linux/delay.h>
+#include <clk.h>
#include "s3c24x0_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -137,15 +141,26 @@
return I2C_NOK_TOUT;
}
-static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
+static int hsi2c_get_clk_details(struct udevice *dev)
{
+ struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
ulong clkin;
unsigned int op_clk = i2c_bus->clock_frequency;
unsigned int i = 0, utemp0 = 0, utemp1 = 0;
unsigned int t_ftl_cycle;
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
clkin = get_i2c_clk();
+#else
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_name(dev, "hsi2c", &clk);
+ if (ret < 0)
+ return ret;
+ clkin = clk_get_rate(&clk);
+#endif
/* FPCLK / FI2C =
* (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
* uTemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
@@ -487,7 +502,7 @@
i2c_bus->clock_frequency = speed;
- if (hsi2c_get_clk_details(i2c_bus))
+ if (hsi2c_get_clk_details(dev))
return -EFAULT;
hsi2c_ch_init(i2c_bus);
@@ -514,7 +529,9 @@
static int s3c_i2c_of_to_plat(struct udevice *dev)
{
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
const void *blob = gd->fdt_blob;
+#endif
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
int node;
@@ -522,7 +539,9 @@
i2c_bus->hsregs = dev_read_addr_ptr(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
i2c_bus->id = pinmux_decode_periph_id(blob, node);
+#endif
i2c_bus->clock_frequency =
dev_read_u32_default(dev, "clock-frequency",
@@ -530,7 +549,9 @@
i2c_bus->node = node;
i2c_bus->bus_num = dev_seq(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
exynos_pinmux_config(i2c_bus->id, PINMUX_FLAG_HS_MODE);
+#endif
i2c_bus->active = true;
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index ae3a801..ade1ad6 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -9,12 +9,15 @@
#include <fdtdec.h>
#include <time.h>
#include <log.h>
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
+#endif
#include <asm/global_data.h>
#include <asm/io.h>
#include <i2c.h>
+#include <clk.h>
#include "s3c24x0_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -46,10 +49,23 @@
clrbits_le32(&i2c->iiccon, I2CCON_IRPND);
}
-static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
+static int i2c_ch_init(struct udevice *dev, int speed, int slaveadd)
{
+ struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
+ struct s3c24x0_i2c *i2c = i2c_bus->regs;
ulong freq, pres = 16, div;
+
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
freq = get_i2c_clk();
+#else
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_name(dev, "i2c", &clk);
+ if (ret < 0)
+ return ret;
+ freq = clk_get_rate(&clk);
+#endif
/* calculate prescaler and divisor values */
if ((freq / pres / (16 + 1)) > speed)
/* set prescaler to 512 */
@@ -67,6 +83,7 @@
writel(slaveadd, &i2c->iicadd);
/* program Master Transmit (and implicit STOP) */
writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
+ return 0;
}
#define SYS_I2C_S3C24X0_SLAVE_ADDR 0
@@ -77,8 +94,9 @@
i2c_bus->clock_frequency = speed;
- i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
- SYS_I2C_S3C24X0_SLAVE_ADDR);
+ if (i2c_ch_init(dev, i2c_bus->clock_frequency,
+ SYS_I2C_S3C24X0_SLAVE_ADDR))
+ return -EFAULT;
return 0;
}
@@ -293,7 +311,9 @@
static int s3c_i2c_of_to_plat(struct udevice *dev)
{
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
const void *blob = gd->fdt_blob;
+#endif
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
int node;
@@ -301,7 +321,9 @@
i2c_bus->regs = dev_read_addr_ptr(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
i2c_bus->id = pinmux_decode_periph_id(blob, node);
+#endif
i2c_bus->clock_frequency =
dev_read_u32_default(dev, "clock-frequency",
@@ -309,7 +331,9 @@
i2c_bus->node = node;
i2c_bus->bus_num = dev_seq(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
exynos_pinmux_config(i2c_bus->id, 0);
+#endif
i2c_bus->active = true;
diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h
index ec8f1ac..12249d5 100644
--- a/drivers/i2c/s3c24x0_i2c.h
+++ b/drivers/i2c/s3c24x0_i2c.h
@@ -54,7 +54,9 @@
struct exynos5_hsi2c *hsregs;
int is_highspeed; /* High speed type, rather than I2C */
unsigned clock_frequency;
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
int id;
+#endif
unsigned clk_cycle;
unsigned clk_div;
};