| /* |
| * Voipac PXA270 configuration file |
| * |
| * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Board Configuration Options |
| */ |
| #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ |
| #define CONFIG_VPAC270 1 /* Voipac PXA270 board */ |
| |
| #undef BOARD_LATE_INIT |
| #undef CONFIG_SKIP_RELOCATE_UBOOT |
| #undef CONFIG_USE_IRQ |
| #undef CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_SIZE 0x4000 |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 |
| |
| #define CONFIG_ENV_OVERWRITE /* override default environment */ |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ |
| "bootm 0xa4000000; " \ |
| "fi; " \ |
| "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ |
| "bootm 0xa4000000; " \ |
| "fi; " \ |
| "bootm 0x40000;" |
| #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" |
| #define CONFIG_TIMESTAMP |
| #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| |
| #define CONFIG_LZMA /* LZMA compression support */ |
| |
| /* |
| * Serial Console Configuration |
| */ |
| #define CONFIG_PXA_SERIAL |
| #define CONFIG_FFUART 1 |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* |
| * Bootloader Components Configuration |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_ENV |
| #undef CONFIG_CMD_IMLS |
| #define CONFIG_CMD_MMC |
| #define CONFIG_CMD_USB |
| #undef CONFIG_LCD |
| #define CONFIG_CMD_IDE |
| |
| #ifdef CONFIG_ONENAND_U_BOOT |
| #undef CONFIG_CMD_FLASH |
| #define CONFIG_CMD_ONENAND |
| #else |
| #define CONFIG_CMD_FLASH |
| #undef CONFIG_CMD_ONENAND |
| #endif |
| |
| /* |
| * Networking Configuration |
| * chip on the Voipac PXA270 board |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| |
| #define CONFIG_NET_MULTI 1 |
| #define CONFIG_DRIVER_DM9000 1 |
| #define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ |
| #define DM9000_IO (CONFIG_DM9000_BASE) |
| #define DM9000_DATA (CONFIG_DM9000_BASE + 4) |
| #define CONFIG_NET_RETRY_COUNT 10 |
| |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #endif |
| |
| /* |
| * MMC Card Configuration |
| */ |
| #ifdef CONFIG_CMD_MMC |
| #define CONFIG_MMC |
| #define CONFIG_PXA_MMC |
| #define CONFIG_SYS_MMC_BASE 0xF0000000 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| /* |
| * KGDB |
| */ |
| #ifdef CONFIG_CMD_KGDB |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| /* |
| * HUSH Shell Configuration |
| */ |
| #define CONFIG_SYS_HUSH_PARSER 1 |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ |
| #else |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| #endif |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_DEVICE_NULLDEV 1 |
| |
| /* |
| * Clock Configuration |
| */ |
| #undef CONFIG_SYS_CLKS_IN_HZ |
| #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ |
| #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /* |
| * DRAM Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ |
| #define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ |
| #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ |
| |
| #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ |
| #define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR (0x5c000000) |
| |
| /* |
| * NOR FLASH |
| */ |
| #if defined(CONFIG_CMD_FLASH) /* NOR */ |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ |
| |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 |
| #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) |
| |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 |
| #define CONFIG_SYS_FLASH_PROTECTION 1 |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| |
| #elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ |
| #define CONFIG_SYS_NO_FLASH |
| #define CONFIG_SYS_ONENAND_BASE 0x00000000 |
| #define CONFIG_ENV_IS_IN_ONENAND 1 |
| |
| #else /* No flash */ |
| #define CONFIG_SYS_NO_FLASH |
| #define CONFIG_SYS_ENV_IS_NOWHERE |
| #endif |
| |
| #define CONFIG_SYS_MONITOR_BASE 0x000000 |
| #define CONFIG_SYS_MONITOR_LEN 0x40000 |
| |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) |
| #define CONFIG_ENV_SECT_SIZE 0x40000 |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
| |
| /* |
| * IDE |
| */ |
| #ifdef CONFIG_CMD_IDE |
| #define CONFIG_LBA48 |
| #undef CONFIG_IDE_LED |
| #undef CONFIG_IDE_RESET |
| |
| #define CONFIG_SYS_IDE_MAXBUS 1 |
| #define CONFIG_SYS_IDE_MAXDEVICE 1 |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 |
| |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0x120 |
| #define CONFIG_SYS_ATA_REG_OFFSET 0x120 |
| #define CONFIG_SYS_ATA_ALT_OFFSET 0x120 |
| |
| #define CONFIG_SYS_ATA_STRIDE 2 |
| #endif |
| |
| /* |
| * GPIO settings |
| */ |
| #define CONFIG_SYS_GPSR0_VAL 0x01308800 |
| #define CONFIG_SYS_GPSR1_VAL 0x00cf0000 |
| #define CONFIG_SYS_GPSR2_VAL 0x922ac000 |
| #define CONFIG_SYS_GPSR3_VAL 0x0161e800 |
| |
| #define CONFIG_SYS_GPCR0_VAL 0x00010000 |
| #define CONFIG_SYS_GPCR1_VAL 0x0 |
| #define CONFIG_SYS_GPCR2_VAL 0x0 |
| #define CONFIG_SYS_GPCR3_VAL 0x0 |
| |
| #define CONFIG_SYS_GPDR0_VAL 0xcbb18800 |
| #define CONFIG_SYS_GPDR1_VAL 0xfccfa981 |
| #define CONFIG_SYS_GPDR2_VAL 0x922affff |
| #define CONFIG_SYS_GPDR3_VAL 0x0161e904 |
| |
| #define CONFIG_SYS_GAFR0_L_VAL 0x00100000 |
| #define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510 |
| #define CONFIG_SYS_GAFR1_L_VAL 0x6992901a |
| #define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa |
| #define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa |
| #define CONFIG_SYS_GAFR2_U_VAL 0x4109a401 |
| #define CONFIG_SYS_GAFR3_L_VAL 0x54010310 |
| #define CONFIG_SYS_GAFR3_U_VAL 0x00025401 |
| |
| #define CONFIG_SYS_PSSR_VAL 0x30 |
| |
| /* |
| * Clock settings |
| */ |
| #define CONFIG_SYS_CKEN 0x00500240 |
| #define CONFIG_SYS_CCCR 0x02000290 |
| |
| /* |
| * Memory settings |
| */ |
| #define CONFIG_SYS_MSC0_VAL 0x3ffc95fa |
| #define CONFIG_SYS_MSC1_VAL 0x02ccf974 |
| #define CONFIG_SYS_MSC2_VAL 0x00000000 |
| #define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3 |
| #define CONFIG_SYS_MDREFR_VAL 0x201fe01e |
| #define CONFIG_SYS_MDMRS_VAL 0x00000000 |
| #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 |
| #define CONFIG_SYS_SXCNFG_VAL 0x40044004 |
| #define CONFIG_SYS_MEM_BUF_IMP 0x0f |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| #define CONFIG_SYS_MECR_VAL 0x00000001 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00014307 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00014307 |
| #define CONFIG_SYS_MCATT0_VAL 0x0001c787 |
| #define CONFIG_SYS_MCATT1_VAL 0x0001c787 |
| #define CONFIG_SYS_MCIO0_VAL 0x0001430f |
| #define CONFIG_SYS_MCIO1_VAL 0x0001430f |
| |
| /* |
| * LCD |
| */ |
| #ifdef CONFIG_LCD |
| #define CONFIG_VOIPAC_LCD |
| #endif |
| |
| /* |
| * USB |
| */ |
| #ifdef CONFIG_CMD_USB |
| #define CONFIG_USB_OHCI_NEW |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT |
| #define CONFIG_SYS_USB_OHCI_BOARD_INIT |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270" |
| #define CONFIG_USB_STORAGE |
| #endif |
| |
| #endif /* __CONFIG_H */ |