MIPS: add support for Broadcom MIPS BCM6338 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/mips/dts/brcm,bcm6338.dtsi b/arch/mips/dts/brcm,bcm6338.dtsi
new file mode 100644
index 0000000..eb51a43
--- /dev/null
+++ b/arch/mips/dts/brcm,bcm6338.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6338-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/bcm6338-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm6338";
+
+ cpus {
+ reg = <0xfffe0000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu@0 {
+ compatible = "brcm,bcm6338-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ periph_clk: periph-clk {
+ compatible = "brcm,bcm6345-clk";
+ reg = <0xfffe0004 0x4>;
+ #clock-cells = <1>;
+ };
+ };
+
+ pflash: nor@1fc00000 {
+ compatible = "cfi-flash";
+ reg = <0x1fc00000 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ pll_cntl: syscon@fffe0008 {
+ compatible = "syscon";
+ reg = <0xfffe0008 0x4>;
+ };
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pll_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_rst: reset-controller@fffe0028 {
+ compatible = "brcm,bcm6345-reset";
+ reg = <0xfffe0028 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@fffe021c {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0xfffe021c 0xc>;
+ clocks = <&periph_osc>;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdt>;
+ };
+
+ uart0: serial@fffe0300 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfffe0300 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio-controller@fffe0404 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0xfffe0404 0x4>, <0xfffe040c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <8>;
+
+ status = "disabled";
+ };
+
+ memory-controller@fffe3100 {
+ compatible = "brcm,bcm6338-mc";
+ reg = <0xfffe3100 0x38>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index e849438..7071888 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -4,6 +4,7 @@
config SYS_SOC
default "bcm3380" if SOC_BMIPS_BCM3380
default "bcm6328" if SOC_BMIPS_BCM6328
+ default "bcm6338" if SOC_BMIPS_BCM6338
default "bcm6348" if SOC_BMIPS_BCM6348
default "bcm6358" if SOC_BMIPS_BCM6358
default "bcm63268" if SOC_BMIPS_BCM63268
@@ -33,6 +34,17 @@
help
This supports BMIPS BCM6328 family including BCM63281 and BCM63283.
+config SOC_BMIPS_BCM6338
+ bool "BMIPS BCM6338 family"
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select MIPS_TUNE_4KC
+ select MIPS_L1_CACHE_SHIFT_4
+ select SWAP_IO_SPACE
+ select SYSRESET_SYSCON
+ help
+ This supports BMIPS BCM6338 family.
+
config SOC_BMIPS_BCM6348
bool "BMIPS BCM6348 family"
select SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/mach-bmips/include/ioremap.h b/arch/mips/mach-bmips/include/ioremap.h
index d3dc0b8..a57f55d 100644
--- a/arch/mips/mach-bmips/include/ioremap.h
+++ b/arch/mips/mach-bmips/include/ioremap.h
@@ -18,7 +18,8 @@
static inline int is_bmips_internal_registers(phys_addr_t offset)
{
-#if defined(CONFIG_SOC_BMIPS_BCM6348) || \
+#if defined(CONFIG_SOC_BMIPS_BCM6338) || \
+ defined(CONFIG_SOC_BMIPS_BCM6348) || \
defined(CONFIG_SOC_BMIPS_BCM6358)
if (offset >= 0xfffe0000)
return 1;