ARM: zynq: Added efuse status register base address
Added efuse status register base address. This register
is used for determining whether efuse was blown or not.
Also, added the zynq_get_silicon_version() to get the
silicon version of the zynq board.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 7626b5c..816d0c5 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -14,6 +14,9 @@
{
}
+#define ZYNQ_SILICON_VER_MASK 0xF0000000
+#define ZYNQ_SILICON_VER_SHIFT 28
+
int arch_cpu_init(void)
{
zynq_slcr_unlock();
@@ -42,6 +45,16 @@
return 0;
}
+unsigned int zynq_get_silicon_version(void)
+{
+ unsigned int ver;
+
+ ver = (readl(&devcfg_base->mctrl) &
+ ZYNQ_SILICON_VER_MASK) >> ZYNQ_SILICON_VER_SHIFT;
+
+ return ver;
+}
+
void reset_cpu(ulong addr)
{
zynq_slcr_cpu_reset();
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index 39184da..20f62bf 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -22,6 +22,7 @@
#define ZYNQ_SPI_BASEADDR0 0xE0006000
#define ZYNQ_SPI_BASEADDR1 0xE0007000
#define ZYNQ_DDRC_BASEADDR 0xF8006000
+#define ZYNQ_EFUSE_BASEADDR 0xF800D000
/* Bootmode setting values */
#define ZYNQ_BM_MASK 0xF
@@ -130,4 +131,12 @@
};
#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
+struct efuse_reg {
+ u32 reserved1[4];
+ u32 status;
+ u32 reserved2[3];
+};
+
+#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
+
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index a68e1b3..2445a04 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -16,6 +16,7 @@
extern u32 zynq_slcr_get_boot_mode(void);
extern u32 zynq_slcr_get_idcode(void);
extern void zynq_ddrc_init(void);
+extern unsigned int zynq_get_silicon_version(void);
/* Driver extern functions */
extern int zynq_sdhci_init(u32 regbase);