diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
new file mode 100644
index 0000000..fc92d45
--- /dev/null
+++ b/include/configs/lwmon.h
@@ -0,0 +1,534 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC823		1	/* This is a MPC823E CPU	*/
+#define CONFIG_LWMON		1	/* ...on a LWMON board		*/
+
+#define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init		*/
+
+#define CONFIG_LCD		1	/* use LCD controller ...	*/
+#define CONFIG_HLD1045		1	/* ... with a HLD1045 display	*/
+
+#if 1
+#define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
+#else
+#define CONFIG_8xx_CONS_SCC2
+#endif
+
+#define CONFIG_BAUDRATE		115200	/* with watchdog >= 38400 needed */
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second	*/
+
+#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+
+/* pre-boot commands */
+#define	CONFIG_PREBOOT		"setenv bootdelay 15"
+
+#undef	CONFIG_BOOTARGS
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_CACHE | \
+				 CFG_POST_WATCHDOG | \
+				 CFG_POST_RTC | \
+				 CFG_POST_MEMORY | \
+				 CFG_POST_CPU | \
+				 CFG_POST_UART | \
+				 CFG_POST_ETHER | \
+				 CFG_POST_SPI | \
+				 CFG_POST_USB | \
+				 CFG_POST_SPR)
+
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS						\
+	"kernel_addr=40040000\0"						\
+	"ramdisk_addr=40100000\0"						\
+	"magic_keys=#3\0"							\
+	"key_magic#=28\0"							\
+	"key_cmd#=setenv addfb setenv bootargs \\$(bootargs) console=tty0\0"	\
+	"key_magic3=24\0"							\
+	"key_cmd3=echo *** Entering Test Mode ***;" \
+		"setenv add_misc setenv bootargs \\$(bootargs) testmode\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
+	"ramargs=setenv bootargs root=/dev/ram rw\0"				\
+	"addfb=setenv bootargs $(bootargs) console=ttyS1,$(baudrate)\0"		\
+	"addip=setenv bootargs $(bootargs) "					\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off " \
+		"panic=1\0"							\
+	"add_wdt=setenv bootargs $(bootargs) $(wdt_args)\0"			\
+	"flash_nfs=run nfsargs addip add_wdt addfb;"		\
+		"bootm $(kernel_addr)\0"					\
+	"flash_self=run ramargs addip add_wdt addfb;"		\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"			\
+	"net_nfs=tftp 100000 /tftpboot/pImage.lwmon;"		\
+		"run nfsargs addip add_wdt addfb;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"						\
+	"load=tftp 100000 /tftpboot/u-boot.bin\0"				\
+	"update=protect off 1:0;era 1:0;cp.b 100000 40000000 $(filesize)\0"	\
+	"wdt_args=wdt_8xx=off\0"						\
+	"verify=no"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
+
+#undef	CONFIG_STATUS_LED		/* Status LED disabled		*/
+
+/* enable I2C and select the hardware/software driver */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C         	/* I2C bit-banged		*/
+
+#ifdef CONFIG_HARD_I2C
+/*
+ * Hardware (CPM) I2C driver configuration
+ */
+# define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+# define CFG_I2C_SLAVE		0xFE
+#endif	/* CONFIG_HARD_I2C */
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(1)	/* 1/4 I2C clock duration */
+#endif	/* CONFIG_SOFT_I2C */
+
+
+#define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+#ifdef CONFIG_8xx_CONS_SCC2	/* Can't use ethernet, then */
+#define CONFIG_COMMANDS	     ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
+				CFG_CMD_DATE	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_BSP	| \
+				CFG_CMD_POST_DIAG )
+#else
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_BSP	| \
+				CFG_CMD_POST_DIAG )
+#endif
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+
+#undef	CFG_HUSH_PARSER			/* enable "hush" shell		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+
+#define CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#else
+#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#endif
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	600	/* Timeout for Flash Write (in ms)	*/
+
+#if 1
+/* Put environment in flash which is much faster to boot */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR	    0x40040000	/* Address    of Environment Sector	*/
+#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
+#define CFG_ENV_SECT_SIZE	0x40000 /* we have BIG sectors only :-(		*/
+#else
+/* Environment in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		2048
+#endif
+/*-----------------------------------------------------------------------
+ * I2C/EEPROM Configuration
+ */
+
+#define CFG_I2C_AUDIO_ADDR	0x28	/* Audio volume control			*/
+#define CFG_I2C_SYSMON_ADDR	0x2E	/* LM87 System Monitor			*/
+#define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
+#define CFG_I2C_POWER_A_ADDR	0x52	/* PCMCIA/USB power switch, channel A	*/
+#define CFG_I2C_POWER_B_ADDR	0x53	/* PCMCIA/USB power switch, channel B	*/
+#define CFG_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard			*/
+#define CFG_I2C_PICIO_ADDR	0x57	/* PIC IO Expander			*/
+
+#define CONFIG_USE_FRAM			/* Use FRAM instead of EEPROM	*/
+#ifdef CONFIG_USE_FRAM	/* use FRAM */
+#define CFG_I2C_EEPROM_ADDR	0x55	/* FRAM FM24CL64		*/
+#define CFG_I2C_EEPROM_ADDR_LEN	2
+#else			/* use EEPROM */
+#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
+#define CFG_I2C_EEPROM_ADDR_LEN	1
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
+#endif	/* CONFIG_USE_FRAM */
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if 0 && defined(CONFIG_WATCHDOG)	/* LWMON uses external MAX706TESA WD */
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+/* EARB, DBGC and DBPC are initialised by the HCW */
+/* => 0x000000C0 */
+#define CFG_SIUMCR	(SIUMCR_GB5E)
+/*#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit, set PLL multiplication factor !
+ */
+/* 0x00405000 */
+#define CFG_PLPRCR_MF	4	/* (4+1) * 13.2 = 66 MHz Clock */
+#define CFG_PLPRCR							\
+		(	(CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
+			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
+			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
+			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
+		)
+
+#define CONFIG_8xx_GCLK_FREQ	((CFG_PLPRCR_MF+1)*13200000)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+/* 0x01800000 */
+#define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
+			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
+			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
+			 SCCR_EBDF00 |	 SCCR_DFSYNC00 |	\
+			 SCCR_DFBRG00	|   SCCR_DFNL000  |	\
+			 SCCR_DFNH000	|   SCCR_DFLCD100 |	\
+			 SCCR_DFALCD01)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+/* 0x00C3 => 0x0003 */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration Register		19-4
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0x0000
+
+/*-----------------------------------------------------------------------
+ * RMDS - RISC Microcode Development Support Control Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMDS 0
+
+/*-----------------------------------------------------------------------
+ *
+ * Interrupt Levels
+ *-----------------------------------------------------------------------
+ */
+#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER 0x2002000F*/
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH) - second Flash bank optional
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x41000000	/* FLASH bank #1	*/
+
+/* used to re-map FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0xFF000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xFF000000	/* OR addr mask */
+
+/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0	*/
+#define CFG_OR_TIMING_FLASH	(OR_SCY_8_CLK)
+
+#define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+				CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CFG_OR_TIMING_FLASH)
+/* 16 bit, bank valid */
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+
+/*
+ * BR3/OR3: SDRAM
+ *
+ * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
+ */
+#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank */
+#define SDRAM_PRELIM_OR_AM	0xF0000000	/* map 256 MB (>SDRAM_MAX_SIZE!) */
+#define SDRAM_TIMING		OR_SCY_0_CLK	/* SDRAM-Timing */
+
+#define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB SDRAM */
+
+#define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * BR5/OR5: Touch Panel
+ *
+ * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0
+ */
+#define TOUCHPNL_BASE		0x20000000
+#define TOUCHPNL_OR_AM		0xFFFF8000
+#define TOUCHPNL_TIMING		OR_SCY_0_CLK
+
+#define CFG_OR5_PRELIM	(TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+			 TOUCHPNL_TIMING )
+#define CFG_BR5_PRELIM	((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
+
+#define	CFG_MEMORY_75
+#undef	CFG_MEMORY_7E
+#undef	CFG_MEMORY_8E
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MPTPR	0x200
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+#define CFG_MAMR_8COL	0x80802114
+#define CFG_MAMR_9COL	0x80904114
+
+/*
+ * MAR setting for SDRAM
+ */
+#define CFG_MAR		0x00000088
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#endif	/* __CONFIG_H */