Merge patch series "Add phyCORE AM62Ax"
Garrett Giordano <ggiordano@phytec.com> says:
This patch set adds the phyCORE AM62Ax board support and documenation to
u-boot.
The phyCORE-AM62Ax is a SoM (System on Module) featuring TI's AM62Ax SoC. It can
be used in combination with different carrier boards. This module can come
with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs
from the AM62x family.
A development Kit, called phyBOARD-Lyra is used as a carrier board reference
design around the AM62x SoM.
This series depends on the following two patches:
- [PATCH v2] arm: mach-k3: am62a7: Provide a way to obtain boot device for non SPL
https://lists.denx.de/pipermail/u-boot/2024-October/570156.html
- [PATCH] board: phytec: common: Introduce CONFIG_PHYTEC_K3_DDR_PATCH
https://lists.denx.de/pipermail/u-boot/2024-November/571543.html
Link: https://lore.kernel.org/r/20241118231606.3161665-1-ggiordano@phytec.com
[trini: Fix warning in board/phytec/common/k3/board.c when
CONFIG_EFI_HAVE_CAPSULE_SUPPORT is not enabled]
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index 4ecf76e..c577a72 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -2,7 +2,7 @@
windows_vm: windows-2022
ubuntu_vm: ubuntu-24.04
macos_vm: macOS-14
- ci_runner_image: trini/u-boot-gitlab-ci-runner:jammy-20240808-21Aug2024
+ ci_runner_image: trini/u-boot-gitlab-ci-runner:jammy-20240808-03Dec2024
# Add '-u 0' options for Azure pipelines, otherwise we get "permission
# denied" error when it tries to "useradd -m -u 1001 vsts_azpcontainer",
# since our $(ci_runner_image) user is not root.
@@ -245,8 +245,6 @@
ln -s u_boot_boardenv_qemu_arm64_na.py /tmp/uboot-test-hooks/py/travis-ci/u_boot_boardenv_qemu_arm64_lwip_na.py
ln -s travis-ci /tmp/uboot-test-hooks/bin/\`hostname\`
ln -s travis-ci /tmp/uboot-test-hooks/py/\`hostname\`
- grub-mkimage --prefix=\"\" -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- grub-mkimage --prefix=\"\" -o ~/grub_x64.efi -O x86_64-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
if [[ "\${TEST_PY_BD}" == "qemu-riscv32_spl" ]]; then
wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.3.1/opensbi-1.3.1-rv-bin.tar.xz | tar -C /tmp -xJ;
export OPENSBI=/tmp/opensbi-1.3.1-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin;
@@ -268,8 +266,8 @@
fi
pip install -r tools/buildman/requirements.txt
tools/buildman/buildman -o \${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e --board \${TEST_PY_BD} \${OVERRIDE}
- cp ~/grub_x86.efi \${UBOOT_TRAVIS_BUILD_DIR}/
- cp ~/grub_x64.efi \${UBOOT_TRAVIS_BUILD_DIR}/
+ cp /opt/grub/grub_x86.efi \${UBOOT_TRAVIS_BUILD_DIR}/
+ cp /opt/grub/grub_x64.efi \${UBOOT_TRAVIS_BUILD_DIR}/
cp /opt/grub/grubriscv64.efi \${UBOOT_TRAVIS_BUILD_DIR}/grub_riscv64.efi
cp /opt/grub/grubaa64.efi \${UBOOT_TRAVIS_BUILD_DIR}/grub_arm64.efi
cp /opt/grub/grubarm.efi \${UBOOT_TRAVIS_BUILD_DIR}/grub_arm.efi
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 2164ad7..57037e2 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -4,6 +4,7 @@
DEFAULT_TAG: ""
MIRROR_DOCKER: docker.io
SJG_LAB: ""
+ PLATFORM: linux/amd64,linux/arm64
default:
tags:
@@ -11,7 +12,7 @@
# Grab our configured image. The source for this is found
# in the u-boot tree at tools/docker/Dockerfile
-image: ${MIRROR_DOCKER}/trini/u-boot-gitlab-ci-runner:jammy-20240808-21Aug2024
+image: ${MIRROR_DOCKER}/trini/u-boot-gitlab-ci-runner:jammy-20240808-03Dec2024
# We run some tests in different order, to catch some failures quicker.
stages:
@@ -34,8 +35,6 @@
- ln -s conf.qemu_arm64_na /tmp/uboot-test-hooks/bin/travis-ci/conf.qemu_arm64_lwip_na
- ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
- ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
- - grub-mkimage --prefix="" -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- - grub-mkimage --prefix="" -o ~/grub_x64.efi -O x86_64-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- if [[ "${TEST_PY_BD}" == "qemu-riscv32_spl" ]]; then
wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.3.1/opensbi-1.3.1-rv-bin.tar.xz | tar -C /tmp -xJ;
export OPENSBI=/tmp/opensbi-1.3.1-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin;
@@ -62,8 +61,8 @@
fi
- tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e
--board ${TEST_PY_BD} ${OVERRIDE}
- - cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/
- - cp ~/grub_x64.efi $UBOOT_TRAVIS_BUILD_DIR/
+ - cp /opt/grub/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/
+ - cp /opt/grub/grub_x64.efi $UBOOT_TRAVIS_BUILD_DIR/
- cp /opt/grub/grubriscv64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_riscv64.efi
- cp /opt/grub/grubaa64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi
- cp /opt/grub/grubarm.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi
diff --git a/Kconfig b/Kconfig
index 1f5b0f1..2e63896 100644
--- a/Kconfig
+++ b/Kconfig
@@ -595,27 +595,6 @@
WARNING: Please make sure that this value is a multiple of the OS
page size.
-config SYS_HAS_SRAM
- bool
- default y if TARGET_PIC32MZDASK
- default y if TARGET_DEVKIT8000
- help
- Enable this to allow support for the on board SRAM.
- SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
- SRAM size is controlled by CONFIG_SYS_SRAM_SIZE.
-
-config SYS_SRAM_BASE
- hex
- default 0x80000000 if TARGET_PIC32MZDASK
- default 0x40200000 if TARGET_DEVKIT8000
- default 0x0
-
-config SYS_SRAM_SIZE
- hex
- default 0x00080000 if TARGET_PIC32MZDASK
- default 0x10000 if TARGET_DEVKIT8000
- default 0x0
-
config SYS_MONITOR_LEN
int "Maximum size in bytes reserved for U-Boot in memory"
default 1048576 if X86
diff --git a/MAINTAINERS b/MAINTAINERS
index bd2c494..ba31f86 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -860,6 +860,7 @@
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
F: arch/arm/mach-zynqmp/
+F: drivers/bootcount/bootcount_zynqmp.c
F: drivers/clk/clk_zynqmp.c
F: driver/firmware/firmware-zynqmp.c
F: drivers/fpga/zynqpl.c
@@ -1735,6 +1736,11 @@
T: git https://source.denx.de/u-boot/custodians/u-boot-ubi.git
F: drivers/mtd/ubi/
+UFETCH
+M: Caleb Connolly <caleb.connolly@linaro.org>
+S: Maintained
+F: cmd/ufetch.c
+
UFS
M: Neil Armstrong <neil.armstrong@linaro.org>
M: Bhupesh Sharma <bhupesh.linux@gmail.com>
diff --git a/Makefile b/Makefile
index 2eaae42..54fdf67 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2025
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
NAME =
# *DOCUMENTATION*
@@ -21,7 +21,7 @@
ifeq ("", "$(CROSS_COMPILE)")
MK_ARCH="${shell uname -m}"
else
- MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\(ccache\)\?[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\3/p'}"
+ MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\(ccache\)\{0,1\}[[:space:]]*\([^\/]*\/\)*\([^-]*\)-[^[:space:]]*/\3/p'}"
endif
unexport HOST_ARCH
ifeq ("x86_64", $(MK_ARCH))
@@ -1149,13 +1149,6 @@
@echo >&2 "See doc/develop/devicetree/control.rst for more info."
@echo >&2 "===================================================="
endif
-ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
- @echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
- @echo >&2 "to binman instead, to avoid the proliferation of"
- @echo >&2 "arch-specific scripts with no tests."
- @echo >&2 "===================================================="
-endif
$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
@@ -1392,12 +1385,21 @@
default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
endif
+binman_dtb := $(shell echo $(CONFIG_BINMAN_DTB))
+ifeq ($(strip $(binman_dtb)),)
+ifeq ($(CONFIG_OF_EMBED),y)
+binman_dtb = ./dts/dt.dtb
+else
+binman_dtb = ./u-boot.dtb
+endif
+endif
+
quiet_cmd_binman = BINMAN $@
cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
$(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
--toolpath $(objtree)/tools \
$(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
- build -u -d u-boot.dtb -O . -m \
+ build -u -d $(binman_dtb) -O . -m \
--allow-missing --fake-ext-blobs \
$(if $(BINMAN_ALLOW_MISSING),--ignore-missing) \
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
@@ -1427,17 +1429,6 @@
u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
$(call if_changed,objcopy)
-# Boards with more complex image requirements can provide an .its source file
-# or a generator script
-# NOTE: Please do not use this. We are migrating away from Makefile rules to use
-# binman instead.
-ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
-U_BOOT_ITS := u-boot.its
-$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
- $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
- $(patsubst %,$(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
-endif
-
ifdef CONFIG_SPL_LOAD_FIT
MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c
index 3a04a9f..2c1ab04 100644
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
@@ -43,7 +43,6 @@
platform_set_mr(si, gd->ram_base, gd->ram_size, MR_ATTR_DRAM);
platform_set_mr(si, gd->bd->bi_flashstart, gd->bd->bi_flashsize, MR_ATTR_FLASH);
- platform_set_mr(si, gd->bd->bi_sramstart, gd->bd->bi_sramsize, MR_ATTR_SRAM);
return 1;
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7282c41..ea414fe 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1177,7 +1177,6 @@
select SUNXI_GPIO
select SYS_NS16550
select SYS_THUMB_BUILD if !ARM64
- select USB if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST
select SPL_USE_TINY_PRINTF if SPL
@@ -1203,6 +1202,7 @@
imply SYSRESET
imply SYSRESET_WATCHDOG
imply SYSRESET_WATCHDOG_AUTO
+ imply USB
imply USB_GADGET
imply WDT
@@ -1324,6 +1324,7 @@
config ARCH_ZYNQMP
bool "Xilinx ZynqMP based platform"
select ARM64
+ select BINMAN
select CLK
select DM
select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index e6be635..5d6953f 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -825,7 +825,7 @@
void dcache_disable(void)
{
- uint32_t sctlr;
+ unsigned long sctlr;
sctlr = get_sctlr();
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
index d568efa..82ecf02 100644
--- a/arch/arm/cpu/armv8/cpu.c
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -94,3 +94,8 @@
secure_ram_addr(psci_arch_init)();
}
#endif
+
+void allow_unaligned(void)
+{
+ set_sctlr(get_sctlr() & ~CR_A);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b92e5ce..99d775f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -190,7 +190,8 @@
cn9130-crb-A.dtb \
cn9130-crb-B.dtb \
ac5-98dx35xx-rd.dtb \
- ac5-98dx35xx-atl-x240.dtb
+ ac5-98dx35xx-atl-x240.dtb \
+ cn9130-atl-x250.dtb
endif
dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
@@ -274,6 +275,7 @@
zynqmp-mini-qspi-x1-stacked.dtb \
zynqmp-mini-qspi-x2-single.dtb \
zynqmp-mini-qspi-x2-stacked.dtb \
+ zynqmp-binman-mini.dtb \
zynqmp-sc-revB.dtb \
zynqmp-sc-revC.dtb \
zynqmp-sm-k24-revA.dtb \
@@ -319,6 +321,7 @@
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-03-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-04-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-05-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-binman.dtb
zynqmp-sc-vek280-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vek280-revA.dtbo
zynqmp-sc-vek280-revB-dtbs := zynqmp-sc-revC.dtb zynqmp-sc-vek280-revB.dtbo
@@ -369,6 +372,7 @@
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-binman-som.dtb
dtb-$(CONFIG_ARCH_VERSAL) += \
versal-mini.dtb \
@@ -935,8 +939,7 @@
fsl-imx8qxp-ai_ml.dtb \
fsl-imx8qxp-colibri.dtb \
fsl-imx8qxp-mek.dtb \
- imx8-deneb.dtb \
- imx8-giedi.dtb
+ imx8-capricorn-cxg3.dtb \
dtb-$(CONFIG_ARCH_IMX8ULP) += \
imx8ulp-evk.dtb
@@ -1156,9 +1159,7 @@
stm32mp257f-ev1.dtb
dtb-$(CONFIG_SOC_K3_AM654) += \
- k3-am654-base-board.dtb \
- k3-am654-r5-base-board.dtb \
- k3-am654-icssg2.dtbo
+ k3-am654-r5-base-board.dtb
dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-r5-common-proc-board.dtb \
k3-j7200-r5-common-proc-board.dtb \
diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi
deleted file mode 100644
index c016e12..0000000
--- a/arch/arm/dts/bcm47622.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm47622", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x818000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm4912.dtsi b/arch/arm/dts/bcm4912.dtsi
deleted file mode 100644
index 3d016c2..0000000
--- a/arch/arm/dts/bcm4912.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm4912", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63146.dtsi b/arch/arm/dts/bcm63146.dtsi
deleted file mode 100644
index 04de96b..0000000
--- a/arch/arm/dts/bcm63146.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63146", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
deleted file mode 100644
index 4bed1f9..0000000
--- a/arch/arm/dts/bcm63158.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63158", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm63158",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi
deleted file mode 100644
index cbd094d..0000000
--- a/arch/arm/dts/bcm63178.dtsi
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm63178", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6756.dtsi b/arch/arm/dts/bcm6756.dtsi
deleted file mode 100644
index ce1b59f..0000000
--- a/arch/arm/dts/bcm6756.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6756", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6813.dtsi b/arch/arm/dts/bcm6813.dtsi
deleted file mode 100644
index c3e6197..0000000
--- a/arch/arm/dts/bcm6813.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6813", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi
deleted file mode 100644
index 10c003a..0000000
--- a/arch/arm/dts/bcm6855.dtsi
+++ /dev/null
@@ -1,257 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6855", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6753",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
-
- leds: led-controller@3000 {
- compatible = "brcm,bcm6753-leds";
- reg = <0x3000 0x3480>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6856.dtsi b/arch/arm/dts/bcm6856.dtsi
deleted file mode 100644
index 38c88f8..0000000
--- a/arch/arm/dts/bcm6856.dtsi
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6856", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk:periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm68360",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi
deleted file mode 100644
index dc95047..0000000
--- a/arch/arm/dts/bcm6858.dtsi
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6858", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
-
- periph_clk: periph_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@2780 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x2780 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@27c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x27c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6858",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6878.dtsi b/arch/arm/dts/bcm6878.dtsi
deleted file mode 100644
index 1e8b5fa..0000000
--- a/arch/arm/dts/bcm6878.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6878", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts
deleted file mode 100644
index 6f08372..0000000
--- a/arch/arm/dts/bcm947622.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm47622.dtsi"
-
-/ {
- model = "Broadcom BCM947622 Reference Board";
- compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm94912.dts b/arch/arm/dts/bcm94912.dts
deleted file mode 100644
index a3623e6..0000000
--- a/arch/arm/dts/bcm94912.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm4912.dtsi"
-
-/ {
- model = "Broadcom BCM94912 Reference Board";
- compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963146.dts b/arch/arm/dts/bcm963146.dts
deleted file mode 100644
index e39f1e6..0000000
--- a/arch/arm/dts/bcm963146.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63146.dtsi"
-
-/ {
- model = "Broadcom BCM963146 Reference Board";
- compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts
deleted file mode 100644
index eba07e0..0000000
--- a/arch/arm/dts/bcm963158.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63158.dtsi"
-
-/ {
- model = "Broadcom BCM963158 Reference Board";
- compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts
deleted file mode 100644
index fa096e9..0000000
--- a/arch/arm/dts/bcm963178.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63178.dtsi"
-
-/ {
- model = "Broadcom BCM963178 Reference Board";
- compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96756.dts b/arch/arm/dts/bcm96756.dts
deleted file mode 100644
index 9a4a87b..0000000
--- a/arch/arm/dts/bcm96756.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6756.dtsi"
-
-/ {
- model = "Broadcom BCM96756 Reference Board";
- compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96813.dts b/arch/arm/dts/bcm96813.dts
deleted file mode 100644
index af17091..0000000
--- a/arch/arm/dts/bcm96813.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6813.dtsi"
-
-/ {
- model = "Broadcom BCM96813 Reference Board";
- compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts
deleted file mode 100644
index e4e740c..0000000
--- a/arch/arm/dts/bcm96855.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6855.dtsi"
-
-/ {
- model = "Broadcom BCM96855 Reference Board";
- compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96856.dts b/arch/arm/dts/bcm96856.dts
deleted file mode 100644
index 032aeb7..0000000
--- a/arch/arm/dts/bcm96856.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6856.dtsi"
-
-/ {
- model = "Broadcom BCM96856 Reference Board";
- compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96858.dts b/arch/arm/dts/bcm96858.dts
deleted file mode 100644
index 0cbf582..0000000
--- a/arch/arm/dts/bcm96858.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6858.dtsi"
-
-/ {
- model = "Broadcom BCM96858 Reference Board";
- compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96878.dts b/arch/arm/dts/bcm96878.dts
deleted file mode 100644
index 8fbc175..0000000
--- a/arch/arm/dts/bcm96878.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6878.dtsi"
-
-/ {
- model = "Broadcom BCM96878 Reference Board";
- compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/cn9130-atl-x250.dts b/arch/arm/dts/cn9130-atl-x250.dts
new file mode 100644
index 0000000..f2c82da
--- /dev/null
+++ b/arch/arm/dts/cn9130-atl-x250.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Allied Telesis Labs
+ */
+
+#include "cn9130.dtsi"
+
+/ {
+ model = "Allied Telesis x250";
+ compatible = "alliedtelesis,x250",
+ "marvell,cn9130",
+ "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+
+ aliases {
+ serial0 = &uart0;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ fault {
+ label = "fault:red";
+ gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+/*
+ * AP related configuration
+ */
+&ap_pinctl {
+ /* AP_MPP Pins:
+ * GPIO & NC [0-6,9-10,12]
+ * UART0 [11,19]
+ * UART1 [7,8]
+ * Note: The x250-28XTm PT1 units has the console port wired
+ * to the second uart pins (UART1). This was fixed in all
+ * subsequent models.
+ * Here we choose to configure the pin control for both
+ * uarts to cater for either unit.
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0 0 0 0 0 0 0 3 3 0
+ 0 3 0 0 0 0 0 0 0 3 >;
+};
+
+&ap_gpio0 {
+ pp-reset {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "pp-reset";
+ };
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+ /* MPP Bus:
+ * [0-1] DEV
+ * [2-8] GPIO
+ * [9] DEV
+ * [10-12] GPIO
+ * [13] ND_RB
+ * [14] GPIO
+ * [15-28] DEV
+ * [29-30] GPIO
+ * [31] DEV
+ * [32-34] GPIO
+ * [35-36] I2C1
+ * [37-38] I2C0
+ * [39-55] GPIO
+ * [56-60] SPI
+ * [61-62] GPIO
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 0 0 0 0 0 0 0 1
+ 0 0 0 2 0 1 1 1 1 1
+ 1 1 1 1 1 1 1 1 1 0
+ 0 1 0 0 0 2 2 2 2 0
+ 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 6
+ 6 0 0>;
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = <37 38>;
+ marvell,function = <2>;
+ };
+
+ cp0_i2c0_gpio_pins: cp0-i2c-gpio-pins-0 {
+ marvell,pins = <37 38>;
+ marvell,function = <0>;
+ };
+
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = <35 36>;
+ marvell,function = <2>;
+ };
+
+ cp0_nand_pins: cp0-nand-pins {
+ marvell,pins = <0 1 9 15 16 17 18 19 20 21 22 23 24 25 26 27 28 31>;
+ marvell,function = <1>;
+ };
+
+ cp0_nand_rb: cp0-nand-rb {
+ marvell,pins = <13>;
+ marvell,function = <2>;
+ };
+
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = <56 57 58 59 60>;
+ marvell,function = <6>;
+ };
+};
+
+&cp0_comphy {
+ phy0 {
+ phy-type = <COMPHY_TYPE_PEX0>;
+ };
+
+ phy1 {
+ phy-type = <COMPHY_TYPE_IGNORE>;
+ };
+
+ phy2 {
+ phy-type = <COMPHY_TYPE_IGNORE>;
+ };
+
+ phy3 {
+ phy-type = <COMPHY_TYPE_IGNORE>;
+ };
+
+ phy4 {
+ phy-type = <COMPHY_TYPE_IGNORE>;
+ };
+
+ phy5 {
+ phy-type = <COMPHY_TYPE_IGNORE>;
+ };
+};
+
+&cp0_pcie0 {
+ num-lanes = <1>;
+ /* non-prefetchable memory */
+ ranges =<0x82000000 0 0xc0000000 0 0xc0000000 0 0x2000000>;
+ status = "disabled";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ clock-frequency = <200000000>;
+};
+
+&cp0_utmi0 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+};
+
+&cp0_spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+};
+
+&cp0_nand {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_nand_pins &cp0_nand_rb>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-timing-mode = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@user {
+ reg = <0x00000000 0x10000000>;
+ label = "user";
+ };
+ };
+};
+
+&cp0_gpio0
+{
+ nand-protect {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "nand-protect";
+ };
+};
+
+&cp0_gpio1
+{
+ usb-en {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-en";
+ };
+
+ phy-reset {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "phy-reset";
+ };
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ pinctrl-1 = <&cp0_i2c0_gpio_pins>;
+ scl-gpios = <&cp0_gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&cp0_gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ mux@71 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+ reset-gpios = <&cp0_gpio1 19 GPIO_ACTIVE_LOW>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hwmon@2e {
+ compatible = "adi,adt7476";
+ reg = <0x2e>;
+ };
+
+ rtc@68 {
+ compatible = "adi,max31331";
+ reg = <0x68>;
+ };
+ };
+ };
+};
+
+&cp0_i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+};
diff --git a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
index 3aa5d8b..6d7148f 100644
--- a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
+++ b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi
@@ -3,17 +3,6 @@
* Copyright (c) 2023 Linaro Ltd.
*/
-&soc {
- /* TODO: Remove this node once it appears in upstream dts */
- trng: rng@12081400 {
- compatible = "samsung,exynos850-trng";
- reg = <0x12081400 0x100>;
- clocks = <&cmu_core CLK_GOUT_SSS_ACLK>,
- <&cmu_core CLK_GOUT_SSS_PCLK>;
- clock-names = "secss", "pclk";
- };
-};
-
&pmu_system_controller {
bootph-all;
samsung,uart-debug-1;
diff --git a/arch/arm/dts/imx8-capricorn-cxg3.dts b/arch/arm/dts/imx8-capricorn-cxg3.dts
new file mode 100644
index 0000000..2f85975
--- /dev/null
+++ b/arch/arm/dts/imx8-capricorn-cxg3.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Siemens AG
+ */
+
+#include "imx8-capricorn.dtsi"
+
+/ {
+ model = "Siemens CXG3";
+
+ leds_default: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ run {
+ label = "run";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ flt {
+ label = "flt";
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ svc {
+ label = "svc";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ com1_tx {
+ label = "com1-tx";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ com1_rx {
+ label = "com1-rx";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ com2_tx {
+ label = "com2-tx";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ com2_rx {
+ label = "com2-rx";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ cloud {
+ label = "cloud";
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ apps {
+ label = "apps";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ dbg2 {
+ label = "dbg2";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ dbg3 {
+ label = "dbg3";
+ gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ dbg4 {
+ label = "dbg4";
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ muxcgrp: imx8qxp-som {
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ SC_P_ESAI0_FST_LSIO_GPIO0_IO01 0x06000021
+ SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 0x06000021
+ SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x06000021
+ SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x06000021
+ SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x06000021
+ SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x06000021
+ SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x06000021
+ SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x06000021
+ SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x06000021
+ SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021
+ SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x06000021
+ SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021
+ SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000021
+ >;
+ };
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x06000021
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx8-capricorn-u-boot.dtsi b/arch/arm/dts/imx8-capricorn-u-boot.dtsi
new file mode 100644
index 0000000..ad5309b
--- /dev/null
+++ b/arch/arm/dts/imx8-capricorn-u-boot.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Siemens AG
+ */
+
+#include "imx8qxp-u-boot.dtsi"
+
+&{/imx8qx-pm} {
+ bootph-all;
+};
+
+&A35_0 {
+ bootph-all;
+};
+
+&mu {
+ bootph-all;
+};
+
+&clk {
+ bootph-all;
+};
+
+&iomuxc {
+ bootph-all;
+};
+
+&pd_lsio {
+ bootph-all;
+};
+
+&pd_lsio_gpio0 {
+ bootph-all;
+};
+
+&pd_lsio_gpio1 {
+ bootph-all;
+};
+
+&pd_lsio_gpio2 {
+ bootph-all;
+};
+
+&pd_lsio_gpio3 {
+ bootph-all;
+};
+
+&pd_lsio_gpio4 {
+ bootph-all;
+};
+
+&pd_lsio_gpio5 {
+ bootph-all;
+};
+
+&pd_lsio_gpio6 {
+ bootph-all;
+};
+
+&pd_lsio_gpio7 {
+ bootph-all;
+};
+
+&pd_dma {
+ bootph-all;
+};
+
+&pd_dma_lpuart0 {
+ bootph-all;
+};
+
+&pd_dma_lpuart2 {
+ bootph-all;
+};
+
+&pd_conn {
+ bootph-all;
+};
+
+&pd_conn_sdch0 {
+ bootph-all;
+};
+
+&pd_conn_sdch1 {
+ bootph-all;
+};
+
+&pd_conn_sdch2 {
+ bootph-all;
+};
+
+&gpio0 {
+ bootph-all;
+};
+
+&gpio1 {
+ bootph-all;
+};
+
+&gpio2 {
+ bootph-all;
+};
+
+&gpio3 {
+ bootph-all;
+};
+
+&gpio4 {
+ bootph-all;
+};
+
+&gpio5 {
+ bootph-all;
+};
+
+&gpio6 {
+ bootph-all;
+};
+
+&gpio7 {
+ bootph-all;
+};
+
+&lpuart0 {
+ bootph-all;
+};
+
+&lpuart2 {
+ bootph-all;
+};
+
+&usdhc1 {
+ bootph-all;
+};
+
+&usdhc2 {
+ bootph-all;
+};
diff --git a/arch/arm/dts/imx8qxp-capricorn.dtsi b/arch/arm/dts/imx8-capricorn.dtsi
similarity index 64%
rename from arch/arm/dts/imx8qxp-capricorn.dtsi
rename to arch/arm/dts/imx8-capricorn.dtsi
index db5653e..3734a9d 100644
--- a/arch/arm/dts/imx8qxp-capricorn.dtsi
+++ b/arch/arm/dts/imx8-capricorn.dtsi
@@ -9,124 +9,25 @@
/dts-v1/;
#include "fsl-imx8qxp.dtsi"
-#include "imx8qxp-capricorn-u-boot.dtsi"
+#include "imx8-capricorn-u-boot.dtsi"
/ {
- model = "Siemens Giedi";
- compatible = "siemens,capricorn", "fsl,imx8qxp";
-
chosen {
bootargs = "console=ttyLP2,115200 earlycon=lpuart32,0x5a080000,115200";
stdout-path = &lpuart2;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_leds>;
-
- run {
- label = "run";
- gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- flt {
- label = "flt";
- gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- svc {
- label = "svc";
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- com1_tx {
- label = "com1-tx";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- com1_rx {
- label = "com1-rx";
- gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- com2_tx {
- label = "com2-tx";
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- com2_rx {
- label = "com2-rx";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- cloud {
- label = "cloud";
- gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- wlan {
- label = "wlan";
- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- dbg1 {
- label = "dbg1";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- dbg2 {
- label = "dbg2";
- gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- dbg3 {
- label = "dbg3";
- gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- dbg4 {
- label = "dbg4";
- gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+ /* create device for u-boot wdt command */
+ scu-wdt {
+ compatible = "siemens,scu-wdt";
};
+
};
&iomuxc {
pinctrl-names = "default";
muxcgrp: imx8qxp-som {
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <
- SC_P_ESAI0_FST_LSIO_GPIO0_IO01 0x06000021
- SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 0x06000021
- SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x06000021
- SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x06000021
- SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x06000021
- SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x06000021
- SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x06000021
- SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x06000021
- SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x06000021
- SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021
- SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x06000021
- SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021
- SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000021
- >;
- };
-
pinctrl_lpi2c0: lpi2c0grp {
fsl,pins = <
SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x0C000020
diff --git a/arch/arm/dts/imx8-deneb.dts b/arch/arm/dts/imx8-deneb.dts
deleted file mode 100644
index 04c764a..0000000
--- a/arch/arm/dts/imx8-deneb.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2019 Siemens AG
- */
-
-#include "imx8qxp-capricorn.dtsi"
-
-/ {
- model = "Siemens Deneb";
-};
diff --git a/arch/arm/dts/imx8-giedi.dts b/arch/arm/dts/imx8-giedi.dts
deleted file mode 100644
index 0dbfef2..0000000
--- a/arch/arm/dts/imx8-giedi.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2019 Siemens AG
- */
-
-#include "imx8qxp-capricorn.dtsi"
-
-/ {
- model = "Siemens Giedi";
-};
diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
index a235e08..3a4f7d0 100644
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
@@ -16,6 +16,12 @@
dmo,ram-coding-gpios = <&gpio2 8 0>, <&gpio2 1 0>, <&gpio2 0 0>;
};
+ clk_pcie100: clk-pcie100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
@@ -35,6 +41,15 @@
bootph-pre-ram;
};
+&pcie_phy {
+ clocks = <&clk_pcie100>;
+};
+
+&pcie0 {
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk_pcie100>;
+};
+
&pinctrl_hog_sbc {
bootph-pre-ram;
};
@@ -77,6 +92,7 @@
&gpio2 {
bootph-pre-ram;
+ bootph-some-ram;
dsi-reset-hog {
bootph-pre-ram;
@@ -144,8 +160,17 @@
bootph-pre-ram;
};
+&usbmisc1 {
+ bootph-pre-ram;
+};
+
+&usbphynop1 {
+ bootph-pre-ram;
+};
+
&usbotg1 {
dr_mode = "peripheral";
+ bootph-pre-ram;
};
&usdhc2 {
diff --git a/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi b/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi
index 516e52e..512dbc9 100644
--- a/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi
@@ -14,6 +14,10 @@
};
};
+&pinctrl_i2c1 {
+ bootph-pre-ram;
+};
+
&pinctrl_uart3 {
bootph-pre-ram;
};
@@ -54,6 +58,10 @@
bootph-pre-ram;
};
+&i2c1 {
+ bootph-pre-ram;
+};
+
&uart3 {
bootph-pre-ram;
};
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index 6875c6d..6d80d85 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -68,6 +68,11 @@
bootph-all;
};
+&osc_32k {
+ bootph-pre-ram;
+ bootph-all;
+};
+
#ifdef CONFIG_FSL_CAAM
&sec_jr0 {
bootph-pre-ram;
diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
index 805b5f5..1e82e71 100644
--- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
@@ -64,6 +64,7 @@
&gpio3 {
bootph-pre-ram;
+ bootph-some-ram;
bl-enable-hog {
bootph-pre-ram;
@@ -92,6 +93,7 @@
&gpio4 {
bootph-pre-ram;
+ bootph-some-ram;
dsi-reset-hog {
bootph-pre-ram;
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
index c065fb8..546490a 100644
--- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
@@ -9,6 +9,8 @@
aliases {
eeprom0 = &eeprom0;
eeprom1 = &eeprom1;
+ eeprom0wl = &eeprom0wl;
+ eeprom1wl = &eeprom1wl;
mmc0 = &usdhc2; /* MicroSD */
mmc1 = &usdhc3; /* eMMC */
mmc2 = &usdhc1; /* SDIO */
diff --git a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
deleted file mode 100644
index cba5618..0000000
--- a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2019 Siemens AG
- */
-
-#include "imx8qxp-u-boot.dtsi"
-
-&{/imx8qx-pm} {
-
- bootph-pre-ram;
-};
-
-&mu {
- bootph-pre-ram;
-};
-
-&clk {
- bootph-pre-ram;
-};
-
-&iomuxc {
- bootph-pre-ram;
-};
-
-&pd_lsio {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio0 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio1 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio2 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio3 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio4 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio5 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio6 {
- bootph-pre-ram;
-};
-
-&pd_lsio_gpio7 {
- bootph-pre-ram;
-};
-
-&pd_dma {
- bootph-pre-ram;
-};
-
-&pd_dma_lpuart0 {
- bootph-pre-ram;
-};
-
-&pd_dma_lpuart2 {
- bootph-pre-ram;
-};
-
-&pd_conn {
- bootph-pre-ram;
-};
-
-&pd_conn_sdch0 {
- bootph-pre-ram;
-};
-
-&pd_conn_sdch1 {
- bootph-pre-ram;
-};
-
-&pd_conn_sdch2 {
- bootph-pre-ram;
-};
-
-&gpio0 {
- bootph-pre-ram;
-};
-
-&gpio1 {
- bootph-pre-ram;
-};
-
-&gpio2 {
- bootph-pre-ram;
-};
-
-&gpio3 {
- bootph-pre-ram;
-};
-
-&gpio4 {
- bootph-pre-ram;
-};
-
-&gpio5 {
- bootph-pre-ram;
-};
-
-&gpio6 {
- bootph-pre-ram;
-};
-
-&gpio7 {
- bootph-pre-ram;
-};
-
-&lpuart0 {
- bootph-pre-ram;
-};
-
-&lpuart2 {
- bootph-pre-ram;
-};
-
-&usdhc1 {
- bootph-pre-ram;
-};
-
-&usdhc2 {
- bootph-pre-ram;
-};
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 62791c3..8058caa 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -120,6 +120,7 @@
};
};
+#ifdef CONFIG_XPL_BUILD
imx-boot {
filename = "flash.bin";
pad-byte = <0x00>;
@@ -130,4 +131,5 @@
type = "blob-ext";
};
};
+#endif
};
diff --git a/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi
new file mode 100644
index 0000000..54b4d0a
--- /dev/null
+++ b/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx91-u-boot.dtsi"
+
+/ {
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog3>;
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+};
+
+&{/soc@0} {
+ bootph-all;
+ bootph-pre-ram;
+};
+
+&aips1 {
+ bootph-pre-ram;
+ bootph-all;
+};
+
+&aips2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&aips3 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&iomuxc {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+®_usdhc2_vmmc {
+ u-boot,off-on-delay-us = <20000>;
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+ bootph-pre-ram;
+};
+
+&pinctrl_uart1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_usdhc1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_usdhc2_gpio {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_usdhc2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio3 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&gpio4 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&lpuart1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&usdhc1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&usdhc2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&lpi2c1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&lpi2c2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&lpi2c3 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&{/soc@0/bus@44000000/i2c@44350000/pmic@25} {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&{/soc@0/bus@44000000/i2c@44350000/pmic@25/regulators} {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_lpi2c1 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_lpi2c2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&pinctrl_lpi2c3 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&fec {
+ compatible = "fsl,imx91-fec", "fsl,imx93-fec", "fsl,imx8mq-fec";
+ phy-reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <15>;
+ phy-reset-post-delay = <100>;
+};
+
+ðphy1 {
+ reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <15000>;
+ reset-deassert-us = <100000>;
+};
+
+&s4muap {
+ bootph-pre-ram;
+ bootph-some-ram;
+ status = "okay";
+};
+
+&clk {
+ bootph-all;
+ bootph-pre-ram;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-rates;
+ /delete-property/ assigned-clock-parents;
+};
+
+&osc_32k {
+ bootph-all;
+ bootph-pre-ram;
+};
+
+&osc_24m {
+ bootph-all;
+ bootph-pre-ram;
+};
+
+&clk_ext1 {
+ bootph-all;
+ bootph-pre-ram;
+};
diff --git a/arch/arm/dts/imx91-u-boot.dtsi b/arch/arm/dts/imx91-u-boot.dtsi
new file mode 100644
index 0000000..5b639c9
--- /dev/null
+++ b/arch/arm/dts/imx91-u-boot.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Mathieu Othacehe <m.othacehe@gmail.com>
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&A55_0 {
+ clocks = <&clk IMX93_CLK_A55_SEL>;
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+
+ ddr-1d-imem-fw {
+ filename = "lpddr4_imem_1d_v202201.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
+
+ ddr-1d-dmem-fw {
+ filename = "lpddr4_dmem_1d_v202201.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
+
+ ddr-2d-imem-fw {
+ filename = "lpddr4_imem_2d_v202201.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
+
+ ddr-2d-dmem-fw {
+ filename = "lpddr4_dmem_2d_v202201.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x204A0000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ u-boot-container {
+ filename = "u-boot-container.bin";
+
+ mkimage {
+ args = "-n u-boot-container.cfgout -T imx8image -e 0x0";
+
+ blob {
+ filename = "u-boot.bin";
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl: blob-ext@1 {
+ filename = "spl.bin";
+ offset = <0x0>;
+ align-size = <0x400>;
+ align = <0x400>;
+ };
+
+ uboot: blob-ext@2 {
+ filename = "u-boot-container.bin";
+ };
+ };
+};
diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
index 6897c91..0c3ca29 100644
--- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
+++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
@@ -2,15 +2,22 @@
/*
* Copyright (C) 2023 PHYTEC Messtechnik GmbH
* Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
*
* Product homepage:
- * phyBOARD-Segin carrier board is reused for the i.MX93 design.
- * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
*/
#include "imx93-u-boot.dtsi"
/ {
+ /*
+ * The phyCORE-i.MX93 u-boot uses the imx93-phyboard-segin.dts as
+ * reference, but does only make use of its SoM (phyCORE) contained
+ * periphery.
+ */
+ model = "PHYTEC phyCORE-i.MX93";
+
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog3>;
@@ -139,6 +146,13 @@
&usdhc1 {
bootph-pre-ram;
bootph-some-ram;
+ /*
+ * Remove pinctrl assignments once they are added to imx93-phycore-som.dtsi
+ */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
};
&usdhc2 {
@@ -215,6 +229,48 @@
MX93_PAD_ENET2_RD3__GPIO4_IO27 0x31e
>;
};
+
+ /*
+ * Remove pinctrl_usdhc1_100mhz and pinctrl_usdhc1_200mhz once they
+ * are added to imx93-phycore-som.dtsi
+ */
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ bootph-pre-ram;
+ bootph-some-ram;
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000139e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000139e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000139e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000139e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000139e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000139e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ bootph-pre-ram;
+ bootph-some-ram;
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000139e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013be
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013be
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013be
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013be
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013be
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013be
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e
+ >;
+ };
};
&lpi2c3 {
@@ -305,4 +361,13 @@
};
};
};
+
+ eeprom@50 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <&buck4>;
+ };
};
diff --git a/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi b/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi
index cbcc7f3..848bc35 100644
--- a/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi
@@ -5,13 +5,3 @@
*/
#include "k3-am62-lp-sk-binman.dtsi"
-
-/ {
- chosen {
- tick-timer = &main_timer0;
- };
-};
-
-&main_timer0 {
- clock-frequency = <25000000>;
-};
diff --git a/arch/arm/dts/k3-am62-r5-lp-sk.dts b/arch/arm/dts/k3-am62-r5-lp-sk.dts
index b8e5f49..135e8d4 100644
--- a/arch/arm/dts/k3-am62-r5-lp-sk.dts
+++ b/arch/arm/dts/k3-am62-r5-lp-sk.dts
@@ -12,6 +12,7 @@
/ {
aliases {
+ tick-timer = &main_timer0;
remoteproc0 = &sysctrler;
remoteproc1 = &a53_0;
serial0 = &wkup_uart0;
@@ -72,6 +73,14 @@
};
};
+&main_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <25000000>;
+};
+
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
status = "okay";
diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
index 63f2eed..31456d2 100644
--- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
+++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
@@ -137,6 +137,20 @@
};
};
};
+
+#include "k3-binman-capsule-r5.dtsi"
+
+&capsule_tiboot3 {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am625-r5-phycore-som-2gb.dtb PHYCORE_AM62X_TIBOOT3
+ */
+ image-guid = "C7D64D6D-10B2-54BC-A3BF-06A9DC3653D9";
+ };
+};
+
#endif /* CONFIG_TARGET_PHYCORE_AM62X_R5 */
#ifdef CONFIG_TARGET_PHYCORE_AM62X_A53
@@ -460,4 +474,29 @@
};
};
};
+
+#include "k3-binman-capsule.dtsi"
+
+&capsule_tispl {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am625-phyboard-lyra-rdk.dtb PHYCORE_AM62X_SPL
+ */
+ image-guid = "09841C3F-F177-5D57-B1F6-754D92879205";
+ };
+};
+
+&capsule_uboot {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am625-phyboard-lyra-rdk.dtb PHYCORE_AM62X_UBOOT
+ */
+ image-guid = "D11A9016-515E-503A-8872-3FF65384D0C4";
+ };
+};
+
#endif /* CONFIG_TARGET_PHYCORE_AM62X_A53 */
diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index d2dd754..34c501d 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -12,6 +12,7 @@
/ {
aliases {
+ tick-timer = &main_timer0;
remoteproc0 = &sysctrler;
remoteproc1 = &a53_0;
serial0 = &wkup_uart0;
@@ -70,6 +71,14 @@
};
};
+&main_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <25000000>;
+};
+
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
status = "okay";
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index 1fc0d40..487ccf0 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -6,16 +6,6 @@
#include "k3-am625-sk-binman.dtsi"
-/ {
- chosen {
- tick-timer = &main_timer0;
- };
-};
-
-&main_timer0 {
- clock-frequency = <25000000>;
-};
-
&main_bcdma {
reg = <0x00 0x485c0100 0x00 0x100>,
<0x00 0x4c000000 0x00 0x20000>,
diff --git a/arch/arm/dts/k3-am62a7-r5-sk.dts b/arch/arm/dts/k3-am62a7-r5-sk.dts
index 464227b..49e6253 100644
--- a/arch/arm/dts/k3-am62a7-r5-sk.dts
+++ b/arch/arm/dts/k3-am62a7-r5-sk.dts
@@ -12,6 +12,7 @@
/ {
aliases {
+ tick-timer = &main_timer0;
remoteproc0 = &sysctrler;
remoteproc1 = &a53_0;
};
@@ -71,6 +72,15 @@
};
};
+&main_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <25000000>;
+ bootph-pre-ram;
+};
+
&wkup_uart0_pins_default {
bootph-pre-ram;
};
diff --git a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi
index c42dec1..7dfbeb1 100644
--- a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi
@@ -9,7 +9,6 @@
/ {
chosen {
stdout-path = "serial2:115200n8";
- tick-timer = &main_timer0;
};
memory@80000000 {
@@ -17,10 +16,6 @@
};
};
-&main_timer0 {
- bootph-all;
-};
-
&cbass_main {
bootph-all;
};
diff --git a/arch/arm/dts/k3-am62p5-r5-sk.dts b/arch/arm/dts/k3-am62p5-r5-sk.dts
index baf1a83..b18b4ce 100644
--- a/arch/arm/dts/k3-am62p5-r5-sk.dts
+++ b/arch/arm/dts/k3-am62p5-r5-sk.dts
@@ -78,6 +78,14 @@
};
};
+&main_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <25000000>;
+};
+
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
status = "okay";
diff --git a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi
index 88d6c40..3710564 100644
--- a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi
+++ b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi
@@ -118,6 +118,19 @@
};
};
+#include "k3-binman-capsule-r5.dtsi"
+
+&capsule_tiboot3 {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am642-r5-phycore-som-2gb.dtb PHYCORE_AM64X_TIBOOT3
+ */
+ image-guid = "B0A6B4FA-5DF0-5CD1-90EC-B60BDE798486";
+ };
+};
+
#endif
#ifdef CONFIG_TARGET_PHYCORE_AM64X_A53
@@ -502,4 +515,29 @@
};
};
};
+
+#include "k3-binman-capsule.dtsi"
+
+&capsule_tispl {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am642-phyboard-electra-rdk.dtb PHYCORE_AM64X_SPL
+ */
+ image-guid = "D0F34382-C2C4-509C-A1D4-BC1CB1B992A8";
+ };
+};
+
+&capsule_uboot {
+ efi-capsule {
+ /*
+ * The GUID is generated dynamically by taking a namespace UUID and hashing
+ * it with the board compatible and fw_image name:
+ * mkeficapsule guidgen k3-am642-phyboard-electra-rdk.dtb PHYCORE_AM64X_UBOOT
+ */
+ image-guid = "0BB40539-DB41-5407-B4D4-EAD057FE10F4";
+ };
+};
+
#endif /* CONFIG_TARGET_PHYCORE_AM64X_A53 */
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
deleted file mode 100644
index 5ebb87f..0000000
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ /dev/null
@@ -1,1568 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for AM6 SoC Family Main Domain peripherals
- *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include <dt-bindings/phy/phy-am654-serdes.h>
-
-&cbass_main {
- msmc_ram: sram@70000000 {
- compatible = "mmio-sram";
- reg = <0x0 0x70000000 0x0 0x200000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x70000000 0x200000>;
-
- atf-sram@0 {
- reg = <0x0 0x20000>;
- };
-
- sysfw-sram@f0000 {
- reg = <0xf0000 0x10000>;
- };
-
- l3cache-sram@100000 {
- reg = <0x100000 0x100000>;
- };
- };
-
- gic500: interrupt-controller@1800000 {
- compatible = "arm,gic-v3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0x90000>, /* GICR */
- <0x00 0x6f000000 0x00 0x2000>, /* GICC */
- <0x00 0x6f010000 0x00 0x1000>, /* GICH */
- <0x00 0x6f020000 0x00 0x2000>; /* GICV */
- /*
- * vcpumntirq:
- * virtual CPU interface maintenance interrupt
- */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
- gic_its: msi-controller@1820000 {
- compatible = "arm,gic-v3-its";
- reg = <0x00 0x01820000 0x00 0x10000>;
- socionext,synquacer-pre-its = <0x1000000 0x400000>;
- msi-controller;
- #msi-cells = <1>;
- };
- };
-
- serdes0: serdes@900000 {
- compatible = "ti,phy-am654-serdes";
- reg = <0x0 0x900000 0x0 0x2000>;
- reg-names = "serdes";
- #phy-cells = <2>;
- power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
- clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
- assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
- assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
- ti,serdes-clk = <&serdes0_clk>;
- #clock-cells = <1>;
- mux-controls = <&serdes_mux 0>;
- };
-
- serdes1: serdes@910000 {
- compatible = "ti,phy-am654-serdes";
- reg = <0x0 0x910000 0x0 0x2000>;
- reg-names = "serdes";
- #phy-cells = <2>;
- power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
- clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
- assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
- assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
- ti,serdes-clk = <&serdes1_clk>;
- #clock-cells = <1>;
- mux-controls = <&serdes_mux 1>;
- };
-
- main_uart0: serial@2800000 {
- compatible = "ti,am654-uart";
- reg = <0x00 0x02800000 0x00 0x100>;
- interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
- current-speed = <115200>;
- power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- main_uart1: serial@2810000 {
- compatible = "ti,am654-uart";
- reg = <0x00 0x02810000 0x00 0x100>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
- power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- main_uart2: serial@2820000 {
- compatible = "ti,am654-uart";
- reg = <0x00 0x02820000 0x00 0x100>;
- interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
- power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- crypto: crypto@4e00000 {
- compatible = "ti,am654-sa2ul";
- reg = <0x0 0x4e00000 0x0 0x1200>;
- power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
-
- dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
- <&main_udmap 0x4003>;
- dma-names = "tx", "rx1", "rx2";
-
- rng: rng@4e10000 {
- compatible = "inside-secure,safexcel-eip76";
- reg = <0x0 0x4e10000 0x0 0x7d>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled"; /* Used by OP-TEE */
- };
- };
-
- /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
- main_timerio_input: pinctrl@104200 {
- compatible = "pinctrl-single";
- reg = <0x0 0x104200 0x0 0x30>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x0000001ff>;
- };
-
- /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
- main_timerio_output: pinctrl@104280 {
- compatible = "pinctrl-single";
- reg = <0x0 0x104280 0x0 0x20>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x0000000f>;
- };
-
- main_pmx0: pinctrl@11c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c000 0x0 0x2e4>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_pmx1: pinctrl@11c2e8 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c2e8 0x0 0x24>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_i2c0: i2c@2000000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2000000 0x0 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 110 1>;
- power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- main_i2c1: i2c@2010000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2010000 0x0 0x100>;
- interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 111 1>;
- power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- main_i2c2: i2c@2020000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2020000 0x0 0x100>;
- interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 112 1>;
- power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- main_i2c3: i2c@2030000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x2030000 0x0 0x100>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 113 1>;
- power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- ecap0: pwm@3100000 {
- compatible = "ti,am654-ecap", "ti,am3352-ecap";
- #pwm-cells = <3>;
- reg = <0x0 0x03100000 0x0 0x60>;
- power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 39 0>;
- clock-names = "fck";
- status = "disabled";
- };
-
- main_spi0: spi@2100000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x2100000 0x0 0x400>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 137 1>;
- power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
- dma-names = "tx0", "rx0";
- status = "disabled";
- };
-
- main_spi1: spi@2110000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x2110000 0x0 0x400>;
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 138 1>;
- power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- assigned-clocks = <&k3_clks 137 1>;
- assigned-clock-rates = <48000000>;
- status = "disabled";
- };
-
- main_spi2: spi@2120000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x2120000 0x0 0x400>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 139 1>;
- power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- main_spi3: spi@2130000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x2130000 0x0 0x400>;
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 140 1>;
- power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- main_spi4: spi@2140000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x2140000 0x0 0x400>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 141 1>;
- power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- main_timer0: timer@2400000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2400000 0x00 0x400>;
- interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 23 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 23 0>;
- assigned-clock-parents = <&k3_clks 23 1>;
- power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer1: timer@2410000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2410000 0x00 0x400>;
- interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 24 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 24 0>;
- assigned-clock-parents = <&k3_clks 24 1>;
- power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer2: timer@2420000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2420000 0x00 0x400>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 27 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 27 0>;
- assigned-clock-parents = <&k3_clks 27 1>;
- power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer3: timer@2430000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2430000 0x00 0x400>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 28 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 28 0>;
- assigned-clock-parents = <&k3_clks 28 1>;
- power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer4: timer@2440000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2440000 0x00 0x400>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 29 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 29 0>;
- assigned-clock-parents = <&k3_clks 29 1>;
- power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer5: timer@2450000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2450000 0x00 0x400>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 30 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 30 0>;
- assigned-clock-parents = <&k3_clks 30 1>;
- power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer6: timer@2460000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2460000 0x00 0x400>;
- interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 31 0>;
- assigned-clocks = <&k3_clks 31 0>;
- assigned-clock-parents = <&k3_clks 31 1>;
- clock-names = "fck";
- power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer7: timer@2470000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2470000 0x00 0x400>;
- interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 32 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 32 0>;
- assigned-clock-parents = <&k3_clks 32 1>;
- power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer8: timer@2480000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2480000 0x00 0x400>;
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 33 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 33 0>;
- assigned-clock-parents = <&k3_clks 33 1>;
- power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer9: timer@2490000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x2490000 0x00 0x400>;
- interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 34 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 34 0>;
- assigned-clock-parents = <&k3_clks 34 1>;
- power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer10: timer@24a0000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x24a0000 0x00 0x400>;
- interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 25 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 25 0>;
- assigned-clock-parents = <&k3_clks 25 1>;
- power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- main_timer11: timer@24b0000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x24b0000 0x00 0x400>;
- interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 26 0>;
- clock-names = "fck";
- assigned-clocks = <&k3_clks 26 0>;
- assigned-clock-parents = <&k3_clks 26 1>;
- power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- };
-
- sdhci0: mmc@4f80000 {
- compatible = "ti,am654-sdhci-5.1";
- reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
- power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
- clock-names = "clk_ahb", "clk_xin";
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x5>;
- ti,otap-del-sel-ddr52 = <0x5>;
- ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
- dma-coherent;
- };
-
- sdhci1: mmc@4fa0000 {
- compatible = "ti,am654-sdhci-5.1";
- reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
- power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
- clock-names = "clk_ahb", "clk_xin";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x4>;
- ti,otap-del-sel-ddr52 = <0x4>;
- ti,otap-del-sel-hs200 = <0x7>;
- ti,clkbuf-sel = <0x7>;
- ti,trm-icp = <0x8>;
- dma-coherent;
- };
-
- scm_conf: scm-conf@100000 {
- compatible = "syscon", "simple-mfd";
- reg = <0 0x00100000 0 0x1c000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x00100000 0x1c000>;
-
- serdes0_clk: clock@4080 {
- compatible = "syscon";
- reg = <0x00004080 0x4>;
- };
-
- serdes1_clk: clock@4090 {
- compatible = "syscon";
- reg = <0x00004090 0x4>;
- };
-
- serdes_mux: mux-controller {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
- mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
- <0x4090 0x3>; /* SERDES1 lane select */
- };
-
- dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
- compatible = "syscon";
- reg = <0x000041e0 0x14>;
- };
-
- ehrpwm_tbclk: clock-controller@4140 {
- compatible = "ti,am654-ehrpwm-tbclk";
- reg = <0x4140 0x18>;
- #clock-cells = <1>;
- };
- };
-
- dwc3_0: dwc3@4000000 {
- compatible = "ti,am654-dwc3";
- reg = <0x0 0x4000000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x4000000 0x20000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
- assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
- assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
- <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
-
- usb0: usb@10000 {
- compatible = "snps,dwc3";
- reg = <0x10000 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "peripheral",
- "host",
- "otg";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- phys = <&usb0_phy>;
- phy-names = "usb2-phy";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- usb0_phy: phy@4100000 {
- compatible = "ti,am654-usb2", "ti,omap-usb2";
- reg = <0x0 0x4100000 0x0 0x54>;
- syscon-phy-power = <&scm_conf 0x4000>;
- clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
- clock-names = "wkupclk", "refclk";
- #phy-cells = <0>;
- };
-
- dwc3_1: dwc3@4020000 {
- compatible = "ti,am654-dwc3";
- reg = <0x0 0x4020000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x4020000 0x20000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 152 2>;
- assigned-clocks = <&k3_clks 152 2>;
- assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
-
- usb1: usb@10000 {
- compatible = "snps,dwc3";
- reg = <0x10000 0x10000>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "peripheral",
- "host",
- "otg";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- phys = <&usb1_phy>;
- phy-names = "usb2-phy";
- };
- };
-
- usb1_phy: phy@4110000 {
- compatible = "ti,am654-usb2", "ti,omap-usb2";
- reg = <0x0 0x4110000 0x0 0x54>;
- syscon-phy-power = <&scm_conf 0x4020>;
- clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
- clock-names = "wkupclk", "refclk";
- #phy-cells = <0>;
- };
-
- intr_main_gpio: interrupt-controller@a00000 {
- compatible = "ti,sci-intr";
- reg = <0x0 0x00a00000 0x0 0x400>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <100>;
- ti,interrupt-ranges = <0 392 32>;
- };
-
- main_navss: bus@30800000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
- dma-coherent;
- dma-ranges;
-
- ti,sci-dev-id = <118>;
-
- intr_main_navss: interrupt-controller@310e0000 {
- compatible = "ti,sci-intr";
- reg = <0x0 0x310e0000 0x0 0x2000>;
- ti,intr-trigger-type = <4>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <182>;
- ti,interrupt-ranges = <0 64 64>,
- <64 448 64>;
- };
-
- inta_main_udmass: interrupt-controller@33d00000 {
- compatible = "ti,sci-inta";
- reg = <0x0 0x33d00000 0x0 0x100000>;
- interrupt-controller;
- interrupt-parent = <&intr_main_navss>;
- msi-controller;
- #interrupt-cells = <0>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <179>;
- ti,interrupt-ranges = <0 0 256>;
- };
-
- secure_proxy_main: mailbox@32c00000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x00 0x32c00000 0x00 0x100000>,
- <0x00 0x32400000 0x00 0x100000>,
- <0x00 0x32800000 0x00 0x100000>;
- interrupt-names = "rx_011";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- hwspinlock: spinlock@30e00000 {
- compatible = "ti,am654-hwspinlock";
- reg = <0x00 0x30e00000 0x00 0x1000>;
- #hwlock-cells = <1>;
- };
-
- mailbox0_cluster0: mailbox@31f80000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f80000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster1: mailbox@31f81000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f81000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster2: mailbox@31f82000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f82000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster3: mailbox@31f83000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f83000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster4: mailbox@31f84000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f84000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster5: mailbox@31f85000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f85000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster6: mailbox@31f86000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f86000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster7: mailbox@31f87000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f87000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster8: mailbox@31f88000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f88000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster9: mailbox@31f89000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f89000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster10: mailbox@31f8a000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f8a000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- mailbox0_cluster11: mailbox@31f8b000 {
- compatible = "ti,am654-mailbox";
- reg = <0x00 0x31f8b000 0x00 0x200>;
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <16>;
- interrupt-parent = <&intr_main_navss>;
- status = "disabled";
- };
-
- ringacc: ringacc@3c000000 {
- compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x3c000000 0x0 0x400000>,
- <0x0 0x38000000 0x0 0x400000>,
- <0x0 0x31120000 0x0 0x100>,
- <0x0 0x33000000 0x0 0x40000>,
- <0x0 0x31080000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
- ti,num-rings = <818>;
- ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <187>;
- msi-parent = <&inta_main_udmass>;
- };
-
- main_udmap: dma-controller@31150000 {
- compatible = "ti,am654-navss-main-udmap";
- reg = <0x0 0x31150000 0x0 0x100>,
- <0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
- msi-parent = <&inta_main_udmass>;
- #dma-cells = <1>;
-
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <188>;
- ti,ringacc = <&ringacc>;
-
- ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
- <0xd>; /* TX_CHAN */
- ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
- <0xa>; /* RX_CHAN */
- ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
- };
-
- cpts@310d0000 {
- compatible = "ti,am65-cpts";
- reg = <0x0 0x310d0000 0x0 0x400>;
- reg-names = "cpts";
- clocks = <&main_cpts_mux>;
- clock-names = "cpts";
- interrupts-extended = <&intr_main_navss 391>;
- interrupt-names = "cpts";
- ti,cpts-periodic-outputs = <6>;
- ti,cpts-ext-ts-inputs = <8>;
-
- main_cpts_mux: refclk-mux {
- #clock-cells = <0>;
- clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
- <&k3_clks 118 6>, <&k3_clks 118 3>,
- <&k3_clks 118 8>, <&k3_clks 118 14>,
- <&k3_clks 120 3>, <&k3_clks 121 3>;
- assigned-clocks = <&main_cpts_mux>;
- assigned-clock-parents = <&k3_clks 118 5>;
- };
- };
- };
-
- main_gpio0: gpio@600000 {
- compatible = "ti,am654-gpio", "ti,keystone-gpio";
- reg = <0x0 0x600000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&intr_main_gpio>;
- interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <96>;
- ti,davinci-gpio-unbanked = <0>;
- clocks = <&k3_clks 57 0>;
- clock-names = "gpio";
- };
-
- main_gpio1: gpio@601000 {
- compatible = "ti,am654-gpio", "ti,keystone-gpio";
- reg = <0x0 0x601000 0x0 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&intr_main_gpio>;
- interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <90>;
- ti,davinci-gpio-unbanked = <0>;
- clocks = <&k3_clks 58 0>;
- clock-names = "gpio";
- };
-
- pcie0_rc: pcie@5500000 {
- compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
- power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>,
- <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&scm_conf 0x210>;
- ti,syscon-pcie-mode = <&scm_conf 0x4060>;
- bus-range = <0x0 0xff>;
- num-viewport = <16>;
- max-link-speed = <2>;
- dma-coherent;
- interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
- msi-map = <0x0 &gic_its 0x0 0x10000>;
- device_type = "pci";
- status = "disabled";
- };
-
- pcie0_ep: pcie-ep@5500000 {
- compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
- reg-names = "app", "dbics", "addr_space", "atu";
- power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&scm_conf 0x4060>;
- num-ib-windows = <16>;
- num-ob-windows = <16>;
- max-link-speed = <2>;
- dma-coherent;
- interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- pcie1_rc: pcie@5600000 {
- compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
- power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>,
- <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&scm_conf 0x210>;
- ti,syscon-pcie-mode = <&scm_conf 0x4070>;
- bus-range = <0x0 0xff>;
- num-viewport = <16>;
- max-link-speed = <2>;
- dma-coherent;
- interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
- msi-map = <0x0 &gic_its 0x10000 0x10000>;
- device_type = "pci";
- status = "disabled";
- };
-
- pcie1_ep: pcie-ep@5600000 {
- compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
- reg-names = "app", "dbics", "addr_space", "atu";
- power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&scm_conf 0x4070>;
- num-ib-windows = <16>;
- num-ob-windows = <16>;
- max-link-speed = <2>;
- dma-coherent;
- interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
- mcasp0: mcasp@2b00000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x0 0x02b00000 0x0 0x2000>,
- <0x0 0x02b08000 0x0 0x1000>;
- reg-names = "mpu","dat";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 104 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp1: mcasp@2b10000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x0 0x02b10000 0x0 0x2000>,
- <0x0 0x02b18000 0x0 0x1000>;
- reg-names = "mpu","dat";
- interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 105 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcasp2: mcasp@2b20000 {
- compatible = "ti,am33xx-mcasp-audio";
- reg = <0x0 0x02b20000 0x0 0x2000>,
- <0x0 0x02b28000 0x0 0x1000>;
- reg-names = "mpu","dat";
- interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
- dma-names = "tx", "rx";
-
- clocks = <&k3_clks 106 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- cal: cal@6f03000 {
- compatible = "ti,am654-cal";
- reg = <0x0 0x06f03000 0x0 0x400>,
- <0x0 0x06f03800 0x0 0x40>;
- reg-names = "cal_top",
- "cal_rx_core0";
- interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- ti,camerrx-control = <&scm_conf 0x40c0>;
- clock-names = "fck";
- clocks = <&k3_clks 2 0>;
- power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- csi2_0: port@0 {
- reg = <0>;
- };
- };
- };
-
- dss: dss@4a00000 {
- compatible = "ti,am65x-dss";
- reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
- <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
- <0x0 0x04a06000 0x0 0x1000>, /* vid */
- <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
- <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
- <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
- reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2";
-
- ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
-
- power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
-
- clocks = <&k3_clks 67 1>,
- <&k3_clks 216 1>,
- <&k3_clks 67 2>;
- clock-names = "fck", "vp1", "vp2";
-
- /*
- * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
- * DIV1. See "Figure 12-3365. DSS Integration"
- * in AM65x TRM for details.
- */
- assigned-clocks = <&k3_clks 67 2>;
- assigned-clock-parents = <&k3_clks 67 5>;
-
- interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
-
- dma-coherent;
-
- dss_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- ehrpwm0: pwm@3000000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3000000 0x0 0x100>;
- power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ehrpwm1: pwm@3010000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3010000 0x0 0x100>;
- power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ehrpwm2: pwm@3020000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3020000 0x0 0x100>;
- power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ehrpwm3: pwm@3030000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3030000 0x0 0x100>;
- power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ehrpwm4: pwm@3040000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3040000 0x0 0x100>;
- power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- ehrpwm5: pwm@3050000 {
- compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
- #pwm-cells = <3>;
- reg = <0x0 0x3050000 0x0 0x100>;
- power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
- clock-names = "tbclk", "fck";
- status = "disabled";
- };
-
- icssg0: icssg@b000000 {
- compatible = "ti,am654-icssg";
- reg = <0x00 0xb000000 0x00 0x80000>;
- power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0xb000000 0x80000>;
-
- icssg0_mem: memories@0 {
- reg = <0x0 0x2000>,
- <0x2000 0x2000>,
- <0x10000 0x10000>;
- reg-names = "dram0", "dram1",
- "shrdram2";
- };
-
- icssg0_cfg: cfg@26000 {
- compatible = "ti,pruss-cfg", "syscon";
- reg = <0x26000 0x200>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x26000 0x2000>;
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- icssg0_coreclk_mux: coreclk-mux@3c {
- reg = <0x3c>;
- #clock-cells = <0>;
- clocks = <&k3_clks 62 19>, /* icssg0_core_clk */
- <&k3_clks 62 3>; /* icssg0_iclk */
- assigned-clocks = <&icssg0_coreclk_mux>;
- assigned-clock-parents = <&k3_clks 62 3>;
- };
-
- icssg0_iepclk_mux: iepclk-mux@30 {
- reg = <0x30>;
- #clock-cells = <0>;
- clocks = <&k3_clks 62 10>, /* icssg0_iep_clk */
- <&icssg0_coreclk_mux>; /* core_clk */
- assigned-clocks = <&icssg0_iepclk_mux>;
- assigned-clock-parents = <&icssg0_coreclk_mux>;
- };
- };
- };
-
- icssg0_iep0: iep@2e000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2e000 0x1000>;
- clocks = <&icssg0_iepclk_mux>;
- };
-
- icssg0_iep1: iep@2f000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2f000 0x1000>;
- clocks = <&icssg0_iepclk_mux>;
- };
-
- icssg0_mii_rt: mii-rt@32000 {
- compatible = "ti,pruss-mii", "syscon";
- reg = <0x32000 0x100>;
- };
-
- icssg0_mii_g_rt: mii-g-rt@33000 {
- compatible = "ti,pruss-mii-g", "syscon";
- reg = <0x33000 0x1000>;
- };
-
- icssg0_intc: interrupt-controller@20000 {
- compatible = "ti,icssg-intc";
- reg = <0x20000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host_intr0", "host_intr1",
- "host_intr2", "host_intr3",
- "host_intr4", "host_intr5",
- "host_intr6", "host_intr7";
- };
-
- pru0_0: pru@34000 {
- compatible = "ti,am654-pru";
- reg = <0x34000 0x4000>,
- <0x22000 0x100>,
- <0x22400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru0_0-fw";
- };
-
- rtu0_0: rtu@4000 {
- compatible = "ti,am654-rtu";
- reg = <0x4000 0x2000>,
- <0x23000 0x100>,
- <0x23400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu0_0-fw";
- };
-
- tx_pru0_0: txpru@a000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xa000 0x1800>,
- <0x25000 0x100>,
- <0x25400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru0_0-fw";
- };
-
- pru0_1: pru@38000 {
- compatible = "ti,am654-pru";
- reg = <0x38000 0x4000>,
- <0x24000 0x100>,
- <0x24400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru0_1-fw";
- };
-
- rtu0_1: rtu@6000 {
- compatible = "ti,am654-rtu";
- reg = <0x6000 0x2000>,
- <0x23800 0x100>,
- <0x23c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu0_1-fw";
- };
-
- tx_pru0_1: txpru@c000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xc000 0x1800>,
- <0x25800 0x100>,
- <0x25c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru0_1-fw";
- };
-
- icssg0_mdio: mdio@32400 {
- compatible = "ti,davinci_mdio";
- reg = <0x32400 0x100>;
- clocks = <&k3_clks 62 3>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- status = "disabled";
- };
- };
-
- icssg1: icssg@b100000 {
- compatible = "ti,am654-icssg";
- reg = <0x00 0xb100000 0x00 0x80000>;
- power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0xb100000 0x80000>;
-
- icssg1_mem: memories@0 {
- reg = <0x0 0x2000>,
- <0x2000 0x2000>,
- <0x10000 0x10000>;
- reg-names = "dram0", "dram1",
- "shrdram2";
- };
-
- icssg1_cfg: cfg@26000 {
- compatible = "ti,pruss-cfg", "syscon";
- reg = <0x26000 0x200>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x26000 0x2000>;
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- icssg1_coreclk_mux: coreclk-mux@3c {
- reg = <0x3c>;
- #clock-cells = <0>;
- clocks = <&k3_clks 63 19>, /* icssg1_core_clk */
- <&k3_clks 63 3>; /* icssg1_iclk */
- assigned-clocks = <&icssg1_coreclk_mux>;
- assigned-clock-parents = <&k3_clks 63 3>;
- };
-
- icssg1_iepclk_mux: iepclk-mux@30 {
- reg = <0x30>;
- #clock-cells = <0>;
- clocks = <&k3_clks 63 10>, /* icssg1_iep_clk */
- <&icssg1_coreclk_mux>; /* core_clk */
- assigned-clocks = <&icssg1_iepclk_mux>;
- assigned-clock-parents = <&icssg1_coreclk_mux>;
- };
- };
- };
-
- icssg1_iep0: iep@2e000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2e000 0x1000>;
- clocks = <&icssg1_iepclk_mux>;
- };
-
- icssg1_iep1: iep@2f000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2f000 0x1000>;
- clocks = <&icssg1_iepclk_mux>;
- };
-
- icssg1_mii_rt: mii-rt@32000 {
- compatible = "ti,pruss-mii", "syscon";
- reg = <0x32000 0x100>;
- };
-
- icssg1_mii_g_rt: mii-g-rt@33000 {
- compatible = "ti,pruss-mii-g", "syscon";
- reg = <0x33000 0x1000>;
- };
-
- icssg1_intc: interrupt-controller@20000 {
- compatible = "ti,icssg-intc";
- reg = <0x20000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host_intr0", "host_intr1",
- "host_intr2", "host_intr3",
- "host_intr4", "host_intr5",
- "host_intr6", "host_intr7";
- };
-
- pru1_0: pru@34000 {
- compatible = "ti,am654-pru";
- reg = <0x34000 0x4000>,
- <0x22000 0x100>,
- <0x22400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru1_0-fw";
- };
-
- rtu1_0: rtu@4000 {
- compatible = "ti,am654-rtu";
- reg = <0x4000 0x2000>,
- <0x23000 0x100>,
- <0x23400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu1_0-fw";
- };
-
- tx_pru1_0: txpru@a000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xa000 0x1800>,
- <0x25000 0x100>,
- <0x25400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru1_0-fw";
- };
-
- pru1_1: pru@38000 {
- compatible = "ti,am654-pru";
- reg = <0x38000 0x4000>,
- <0x24000 0x100>,
- <0x24400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru1_1-fw";
- };
-
- rtu1_1: rtu@6000 {
- compatible = "ti,am654-rtu";
- reg = <0x6000 0x2000>,
- <0x23800 0x100>,
- <0x23c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu1_1-fw";
- };
-
- tx_pru1_1: txpru@c000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xc000 0x1800>,
- <0x25800 0x100>,
- <0x25c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru1_1-fw";
- };
-
- icssg1_mdio: mdio@32400 {
- compatible = "ti,davinci_mdio";
- reg = <0x32400 0x100>;
- clocks = <&k3_clks 63 3>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- status = "disabled";
- };
- };
-
- icssg2: icssg@b200000 {
- compatible = "ti,am654-icssg";
- reg = <0x00 0xb200000 0x00 0x80000>;
- power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00 0xb200000 0x80000>;
-
- icssg2_mem: memories@0 {
- reg = <0x0 0x2000>,
- <0x2000 0x2000>,
- <0x10000 0x10000>;
- reg-names = "dram0", "dram1",
- "shrdram2";
- };
-
- icssg2_cfg: cfg@26000 {
- compatible = "ti,pruss-cfg", "syscon";
- reg = <0x26000 0x200>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x26000 0x2000>;
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- icssg2_coreclk_mux: coreclk-mux@3c {
- reg = <0x3c>;
- #clock-cells = <0>;
- clocks = <&k3_clks 64 19>, /* icssg1_core_clk */
- <&k3_clks 64 3>; /* icssg1_iclk */
- assigned-clocks = <&icssg2_coreclk_mux>;
- assigned-clock-parents = <&k3_clks 64 3>;
- };
-
- icssg2_iepclk_mux: iepclk-mux@30 {
- reg = <0x30>;
- #clock-cells = <0>;
- clocks = <&k3_clks 64 10>, /* icssg1_iep_clk */
- <&icssg2_coreclk_mux>; /* core_clk */
- assigned-clocks = <&icssg2_iepclk_mux>;
- assigned-clock-parents = <&icssg2_coreclk_mux>;
- };
- };
- };
-
- icssg2_iep0: iep@2e000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2e000 0x1000>;
- clocks = <&icssg2_iepclk_mux>;
- };
-
- icssg2_iep1: iep@2f000 {
- compatible = "ti,am654-icss-iep";
- reg = <0x2f000 0x1000>;
- clocks = <&icssg2_iepclk_mux>;
- };
-
- icssg2_mii_rt: mii-rt@32000 {
- compatible = "ti,pruss-mii", "syscon";
- reg = <0x32000 0x100>;
- };
-
- icssg2_mii_g_rt: mii-g-rt@33000 {
- compatible = "ti,pruss-mii-g", "syscon";
- reg = <0x33000 0x1000>;
- };
-
- icssg2_intc: interrupt-controller@20000 {
- compatible = "ti,icssg-intc";
- reg = <0x20000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host_intr0", "host_intr1",
- "host_intr2", "host_intr3",
- "host_intr4", "host_intr5",
- "host_intr6", "host_intr7";
- };
-
- pru2_0: pru@34000 {
- compatible = "ti,am654-pru";
- reg = <0x34000 0x4000>,
- <0x22000 0x100>,
- <0x22400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru2_0-fw";
- };
-
- rtu2_0: rtu@4000 {
- compatible = "ti,am654-rtu";
- reg = <0x4000 0x2000>,
- <0x23000 0x100>,
- <0x23400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu2_0-fw";
- };
-
- tx_pru2_0: txpru@a000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xa000 0x1800>,
- <0x25000 0x100>,
- <0x25400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru2_0-fw";
- };
-
- pru2_1: pru@38000 {
- compatible = "ti,am654-pru";
- reg = <0x38000 0x4000>,
- <0x24000 0x100>,
- <0x24400 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-pru2_1-fw";
- };
-
- rtu2_1: rtu@6000 {
- compatible = "ti,am654-rtu";
- reg = <0x6000 0x2000>,
- <0x23800 0x100>,
- <0x23c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-rtu2_1-fw";
- };
-
- tx_pru2_1: txpru@c000 {
- compatible = "ti,am654-tx-pru";
- reg = <0xc000 0x1800>,
- <0x25800 0x100>,
- <0x25c00 0x100>;
- reg-names = "iram", "control", "debug";
- firmware-name = "am65x-txpru2_1-fw";
- };
-
- icssg2_mdio: mdio@32400 {
- compatible = "ti,davinci_mdio";
- reg = <0x32400 0x100>;
- clocks = <&k3_clks 64 3>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
deleted file mode 100644
index edd5cfb..0000000
--- a/arch/arm/dts/k3-am65-mcu.dtsi
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for AM6 SoC Family MCU Domain peripherals
- *
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_mcu {
- mcu_conf: scm-conf@40f00000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x0 0x40f00000 0x0 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x40f00000 0x20000>;
-
- phy_gmii_sel: phy@4040 {
- compatible = "ti,am654-phy-gmii-sel";
- reg = <0x4040 0x4>;
- #phy-cells = <1>;
- };
- };
-
- /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
- mcu_timerio_input: pinctrl@40f04200 {
- compatible = "pinctrl-single";
- reg = <0x0 0x40f04200 0x0 0x10>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x00000101>;
- };
-
- /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
- mcu_timerio_output: pinctrl@40f04280 {
- compatible = "pinctrl-single";
- reg = <0x0 0x40f04280 0x0 0x8>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x00000003>;
- };
-
- mcu_uart0: serial@40a00000 {
- compatible = "ti,am654-uart";
- reg = <0x00 0x40a00000 0x00 0x100>;
- interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <96000000>;
- current-speed = <115200>;
- power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcu_ram: sram@41c00000 {
- compatible = "mmio-sram";
- reg = <0x00 0x41c00000 0x00 0x80000>;
- ranges = <0x0 0x00 0x41c00000 0x80000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- mcu_i2c0: i2c@40b00000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x0 0x40b00000 0x0 0x100>;
- interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 114 1>;
- power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- mcu_spi0: spi@40300000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x40300000 0x0 0x400>;
- interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 142 1>;
- power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- mcu_spi1: spi@40310000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x40310000 0x0 0x400>;
- interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 143 1>;
- power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- mcu_spi2: spi@40320000 {
- compatible = "ti,am654-mcspi","ti,omap4-mcspi";
- reg = <0x0 0x40320000 0x0 0x400>;
- interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 144 1>;
- power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- tscadc0: tscadc@40200000 {
- compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
- reg = <0x0 0x40200000 0x0 0x1000>;
- interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 0 2>;
- assigned-clocks = <&k3_clks 0 2>;
- assigned-clock-rates = <60000000>;
- clock-names = "fck";
- dmas = <&mcu_udmap 0x7100>,
- <&mcu_udmap 0x7101 >;
- dma-names = "fifo0", "fifo1";
- status = "disabled";
-
- adc {
- #io-channel-cells = <1>;
- compatible = "ti,am654-adc", "ti,am3359-adc";
- };
- };
-
- tscadc1: tscadc@40210000 {
- compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
- reg = <0x0 0x40210000 0x0 0x1000>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 1 2>;
- assigned-clocks = <&k3_clks 1 2>;
- assigned-clock-rates = <60000000>;
- clock-names = "fck";
- dmas = <&mcu_udmap 0x7102>,
- <&mcu_udmap 0x7103>;
- dma-names = "fifo0", "fifo1";
- status = "disabled";
-
- adc {
- #io-channel-cells = <1>;
- compatible = "ti,am654-adc", "ti,am3359-adc";
- };
- };
-
- /*
- * The MCU domain timer interrupts are routed only to the ESM module,
- * and not currently available for Linux. The MCU domain timers are
- * of limited use without interrupts, and likely reserved by the ESM.
- */
- mcu_timer0: timer@40400000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x40400000 0x00 0x400>;
- clocks = <&k3_clks 35 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer1: timer@40410000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x40410000 0x00 0x400>;
- clocks = <&k3_clks 36 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer2: timer@40420000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x40420000 0x00 0x400>;
- clocks = <&k3_clks 37 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_timer3: timer@40430000 {
- compatible = "ti,am654-timer";
- reg = <0x00 0x40430000 0x00 0x400>;
- clocks = <&k3_clks 38 0>;
- clock-names = "fck";
- power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
- ti,timer-pwm;
- status = "reserved";
- };
-
- mcu_navss: bus@28380000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
- dma-coherent;
- dma-ranges;
-
- ti,sci-dev-id = <119>;
-
- mcu_ringacc: ringacc@2b800000 {
- compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>,
- <0x0 0x28440000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg",
- "proxy_target", "cfg";
- ti,num-rings = <286>;
- ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <195>;
- msi-parent = <&inta_main_udmass>;
- };
-
- mcu_udmap: dma-controller@285c0000 {
- compatible = "ti,am654-navss-mcu-udmap";
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
- msi-parent = <&inta_main_udmass>;
- #dma-cells = <1>;
-
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <194>;
- ti,ringacc = <&mcu_ringacc>;
-
- ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
- <0xd>; /* TX_CHAN */
- ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
- <0xa>; /* RX_CHAN */
- ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
- };
- };
-
- secure_proxy_mcu: mailbox@2a480000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x0 0x2a480000 0x0 0x80000>,
- <0x0 0x2a380000 0x0 0x80000>,
- <0x0 0x2a400000 0x0 0x80000>;
- /*
- * Marked Disabled:
- * Node is incomplete as it is meant for bootloaders and
- * firmware on non-MPU processors
- */
- status = "disabled";
- };
-
- m_can0: can@40528000 {
- compatible = "bosch,m_can";
- reg = <0x0 0x40528000 0x0 0x400>,
- <0x0 0x40500000 0x0 0x4400>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
- clock-names = "hclk", "cclk";
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- m_can1: can@40568000 {
- compatible = "bosch,m_can";
- reg = <0x0 0x40568000 0x0 0x400>,
- <0x0 0x40540000 0x0 0x4400>;
- reg-names = "m_can", "message_ram";
- power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
- clock-names = "hclk", "cclk";
- interrupt-parent = <&gic500>;
- interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
- status = "disabled";
- };
-
- fss: bus@47000000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- ospi0: spi@47040000 {
- compatible = "ti,am654-ospi", "cdns,qspi-nor";
- reg = <0x0 0x47040000 0x0 0x100>,
- <0x5 0x00000000 0x1 0x0000000>;
- interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x0>;
- clocks = <&k3_clks 248 0>;
- assigned-clocks = <&k3_clks 248 0>;
- assigned-clock-parents = <&k3_clks 248 2>;
- assigned-clock-rates = <166666666>;
- power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- ospi1: spi@47050000 {
- compatible = "ti,am654-ospi", "cdns,qspi-nor";
- reg = <0x0 0x47050000 0x0 0x100>,
- <0x7 0x00000000 0x1 0x00000000>;
- interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x0>;
- clocks = <&k3_clks 249 6>;
- power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
- };
-
- mcu_cpsw: ethernet@46000000 {
- compatible = "ti,am654-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x0 0x46000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
- dma-coherent;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
-
- dmas = <&mcu_udmap 0xf000>,
- <&mcu_udmap 0xf001>,
- <&mcu_udmap 0xf002>,
- <&mcu_udmap 0xf003>,
- <&mcu_udmap 0xf004>,
- <&mcu_udmap 0xf005>,
- <&mcu_udmap 0xf006>,
- <&mcu_udmap 0xf007>,
- <&mcu_udmap 0x7000>;
- dma-names = "tx0", "tx1", "tx2", "tx3",
- "tx4", "tx5", "tx6", "tx7",
- "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
- reg = <1>;
- ti,mac-only;
- label = "port1";
- ti,syscon-efuse = <&mcu_conf 0x200>;
- phys = <&phy_gmii_sel 1>;
- };
- };
-
- davinci_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x0 0xf00 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- bus_freq = <1000000>;
- status = "disabled";
- };
-
- cpts@3d000 {
- compatible = "ti,am65-cpts";
- reg = <0x0 0x3d000 0x0 0x400>;
- clocks = <&mcu_cpsw_cpts_mux>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
-
- mcu_cpsw_cpts_mux: refclk-mux {
- #clock-cells = <0>;
- clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
- <&k3_clks 118 6>, <&k3_clks 118 3>,
- <&k3_clks 118 8>, <&k3_clks 118 14>,
- <&k3_clks 120 3>, <&k3_clks 121 3>;
- assigned-clocks = <&mcu_cpsw_cpts_mux>;
- assigned-clock-parents = <&k3_clks 118 5>;
- };
- };
- };
-
- mcu_r5fss0: r5fss@41000000 {
- compatible = "ti,am654-r5fss";
- ti,cluster-mode = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x41000000 0x00 0x41000000 0x20000>,
- <0x41400000 0x00 0x41400000 0x20000>;
- power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
-
- mcu_r5fss0_core0: r5f@41000000 {
- compatible = "ti,am654-r5f";
- reg = <0x41000000 0x00008000>,
- <0x41010000 0x00008000>;
- reg-names = "atcm", "btcm";
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <159>;
- ti,sci-proc-ids = <0x01 0xff>;
- resets = <&k3_reset 159 1>;
- firmware-name = "am65x-mcu-r5f0_0-fw";
- ti,atcm-enable = <1>;
- ti,btcm-enable = <1>;
- ti,loczrama = <1>;
- };
-
- mcu_r5fss0_core1: r5f@41400000 {
- compatible = "ti,am654-r5f";
- reg = <0x41400000 0x00008000>,
- <0x41410000 0x00008000>;
- reg-names = "atcm", "btcm";
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <245>;
- ti,sci-proc-ids = <0x02 0xff>;
- resets = <&k3_reset 245 1>;
- firmware-name = "am65x-mcu-r5f0_1-fw";
- ti,atcm-enable = <1>;
- ti,btcm-enable = <1>;
- ti,loczrama = <1>;
- };
- };
-
- mcu_rti1: watchdog@40610000 {
- compatible = "ti,j7-rti-wdt";
- reg = <0x0 0x40610000 0x0 0x100>;
- clocks = <&k3_clks 135 0>;
- power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
- assigned-clocks = <&k3_clks 135 0>;
- assigned-clock-parents = <&k3_clks 135 4>;
- };
-};
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
deleted file mode 100644
index fd2b998..0000000
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
- *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-&cbass_wakeup {
- dmsc: system-controller@44083000 {
- compatible = "ti,am654-sci";
- ti,host-id = <12>;
-
- mbox-names = "rx", "tx";
-
- mboxes = <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
-
- reg-names = "debug_messages";
- reg = <0x44083000 0x1000>;
-
- k3_pds: power-controller {
- compatible = "ti,sci-pm-domain";
- #power-domain-cells = <2>;
- };
-
- k3_clks: clock-controller {
- compatible = "ti,k2g-sci-clk";
- #clock-cells = <2>;
- };
-
- k3_reset: reset-controller {
- compatible = "ti,sci-reset";
- #reset-cells = <2>;
- };
- };
-
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x43000014 0x4>;
- };
-
- wkup_pmx0: pinctrl@4301c000 {
- compatible = "pinctrl-single";
- reg = <0x4301c000 0x118>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- wkup_uart0: serial@42300000 {
- compatible = "ti,am654-uart";
- reg = <0x42300000 0x100>;
- interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
- current-speed = <115200>;
- power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- wkup_i2c0: i2c@42120000 {
- compatible = "ti,am654-i2c", "ti,omap4-i2c";
- reg = <0x42120000 0x100>;
- interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "fck";
- clocks = <&k3_clks 115 1>;
- power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
- status = "disabled";
- };
-
- intr_wkup_gpio: interrupt-controller@42200000 {
- compatible = "ti,sci-intr";
- reg = <0x42200000 0x200>;
- ti,intr-trigger-type = <1>;
- interrupt-controller;
- interrupt-parent = <&gic500>;
- #interrupt-cells = <1>;
- ti,sci = <&dmsc>;
- ti,sci-dev-id = <156>;
- ti,interrupt-ranges = <0 712 16>;
- };
-
- wkup_gpio0: gpio@42110000 {
- compatible = "ti,am654-gpio", "ti,keystone-gpio";
- reg = <0x42110000 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&intr_wkup_gpio>;
- interrupts = <60>, <61>, <62>, <63>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ti,ngpio = <56>;
- ti,davinci-gpio-unbanked = <0>;
- clocks = <&k3_clks 59 0>;
- clock-names = "gpio";
- };
-
- wkup_vtm0: temperature-sensor@42050000 {
- compatible = "ti,am654-vtm";
- reg = <0x42050000 0x25c>;
- power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
deleted file mode 100644
index 4d7b615..0000000
--- a/arch/arm/dts/k3-am65.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for AM6 SoC Family
- *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/ti,sci_pm_domain.h>
-
-#include "k3-pinctrl.h"
-
-/ {
- model = "Texas Instruments K3 AM654 SoC";
- compatible = "ti,am654";
- interrupt-parent = <&gic500>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- firmware {
- optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- };
-
- psci: psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
- };
-
- a53_timer0: timer-cl0-cpu0 {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- /* Recommendation from GIC500 TRM Table A.3 */
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cbass_main: bus@100000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
- <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
- <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
- <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
- <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
- <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
- /* MCUSS Range */
- <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
- <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
- <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
- <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
- <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
- <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
- <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
- <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
- <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
- <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
- <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
- <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
-
- cbass_mcu: bus@28380000 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
- <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
- <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
- <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
- <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
- <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
- <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
- <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
- <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
- <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
- <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */
- <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
- <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
-
- cbass_wakeup: bus@42040000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- /* WKUP Basic peripherals */
- ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
- };
- };
- };
-};
-
-/* Now include the peripherals for each bus segments */
-#include "k3-am65-main.dtsi"
-#include "k3-am65-mcu.dtsi"
-#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
deleted file mode 100644
index 1637ec5..0000000
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ /dev/null
@@ -1,630 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "k3-am654.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
- compatible = "ti,am654-evm", "ti,am654";
- model = "Texas Instruments AM654 Base Board";
-
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- i2c0 = &wkup_i2c0;
- i2c1 = &mcu_i2c0;
- i2c2 = &main_i2c0;
- i2c3 = &main_i2c1;
- i2c4 = &main_i2c2;
- ethernet0 = &cpsw_port1;
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory@80000000 {
- device_type = "memory";
- /* 4G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
- <0x00000008 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- secure_ddr: secure-ddr@9e800000 {
- reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
- alignment = <0x1000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa0000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa0100000 0 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1100000 0 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a2000000 {
- reg = <0x00 0xa2000000 0x00 0x00100000>;
- alignment = <0x1000>;
- no-map;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&push_button_pins_default>;
-
- switch-5 {
- label = "GPIO Key USER1";
- linux,code = <BTN_0>;
- gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- switch-6 {
- label = "GPIO Key USER2";
- linux,code = <BTN_1>;
- gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
- };
- };
-
- evm_12v0: regulator-0 {
- /* main supply */
- compatible = "regulator-fixed";
- regulator-name = "evm_12v0";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc3v3_io: regulator-1 {
- /* Output of TPS54334 */
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&evm_12v0>;
- };
-
- vdd_mmc1_sd: regulator-2 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_mmc1_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- vin-supply = <&vcc3v3_io>;
- gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
- };
-
- vtt_supply: regulator-3 {
- compatible = "regulator-fixed";
- regulator-name = "vtt";
- pinctrl-names = "default";
- pinctrl-0 = <&ddr_vtt_pins_default>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_io>;
- gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&wkup_pmx0 {
- wkup_uart0_pins_default: wkup-uart0-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */
- AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
- AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
- AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
- >;
- };
-
- ddr_vtt_pins_default: ddr-vtt-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
- >;
- };
-
- wkup_i2c0_pins_default: wkup-i2c0-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
- AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
- >;
- };
-
- push_button_pins_default: push-button-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
- AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
- >;
- };
-
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
- AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
- AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
- AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
- AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
- AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
- AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
- AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
- AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
- AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
- AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
- >;
- };
-
- wkup_pca554_default: wkup-pca554-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
- >;
- };
-
- mcu_uart0_pins_default: mcu-uart0-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
- AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
- AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
- AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
- >;
- };
-
- mcu_cpsw_pins_default: mcu-cpsw-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
- AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
- AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
- AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
- AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
- AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
- AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
- AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
- AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
- AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
- AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
- AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
- >;
- };
-
- mcu_mdio_pins_default: mcu-mdio1-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
- AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
- >;
- };
-
- mcu_i2c0_pins_default: mcu-i2c0-default-pins {
- pinctrl-single,pins = <
- AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */
- AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */
- >;
- };
-};
-
-&main_pmx0 {
- main_uart0_pins_default: main-uart0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
- AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
- AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
- AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
- >;
- };
-
- main_i2c2_pins_default: main-i2c2-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
- AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
- >;
- };
-
- main_spi0_pins_default: main-spi0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
- AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
- AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
- AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
- >;
- };
-
- main_mmc0_pins_default: main-mmc0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
- AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
- AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
- AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
- AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
- AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
- AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
- AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
- AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
- AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
- AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
- AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
- >;
- };
-
- main_mmc1_pins_default: main-mmc1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
- AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
- AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
- AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
- AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
- AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
- AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
- AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
- >;
- };
-
- usb1_pins_default: usb1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
- >;
- };
-};
-
-&main_pmx1 {
- main_i2c0_pins_default: main-i2c0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
- AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
- >;
- };
-
- main_i2c1_pins_default: main-i2c1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
- AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
- >;
- };
-
- ecap0_pins_default: ecap0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
- >;
- };
-};
-
-&wkup_uart0 {
- /* Wakeup UART is used by System firmware */
- status = "reserved";
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_uart0_pins_default>;
-};
-
-&mcu_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_uart0_pins_default>;
-};
-
-&main_uart0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_uart0_pins_default>;
- power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
-};
-
-&wkup_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- eeprom@50 {
- /* AT24CM01 */
- compatible = "atmel,24c1024";
- reg = <0x50>;
- };
-
- vdd_mpu: regulator@60 {
- compatible = "ti,tps62363";
- reg = <0x60>;
- regulator-name = "VDD_MPU";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1770000>;
- regulator-always-on;
- regulator-boot-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- ti,enable-vout-discharge;
- };
-
- gpio@38 {
- compatible = "nxp,pca9554";
- reg = <0x38>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- pca9554: gpio@39 {
- compatible = "nxp,pca9554";
- reg = <0x39>;
- gpio-controller;
- #gpio-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&wkup_pca554_default>;
- interrupt-parent = <&wkup_gpio0>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
-
-&mcu_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_i2c0_pins_default>;
- clock-frequency = <400000>;
-};
-
-&main_i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
-
- pca9555: gpio@21 {
- compatible = "nxp,pca9555";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&main_i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <400000>;
-};
-
-&main_i2c2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c2_pins_default>;
- clock-frequency = <400000>;
-};
-
-&ecap0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ecap0_pins_default>;
-};
-
-&main_spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&main_spi0_pins_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,pindir-d0-out-d1-in;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <1>;
- spi-max-frequency = <48000000>;
- };
-};
-
-&sdhci0 {
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- bus-width = <8>;
- non-removable;
- ti,driver-strength-ohm = <50>;
- disable-wp;
-};
-
-/*
- * Because of erratas i2025 and i2026 for silicon revision 1.0, the
- * SD card interface might fail. Boards with sr1.0 are recommended to
- * disable sdhci1
- */
-&sdhci1 {
- vmmc-supply = <&vdd_mmc1_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
- disable-wp;
-};
-
-&usb1 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins_default>;
- dr_mode = "otg";
-};
-
-&dwc3_0 {
- status = "disabled";
-};
-
-&usb0_phy {
- status = "disabled";
-};
-
-&tscadc0 {
- status = "okay";
- adc {
- ti,adc-channels = <0 1 2 3 4 5 6 7>;
- };
-};
-
-&tscadc1 {
- status = "okay";
- adc {
- ti,adc-channels = <0 1 2 3 4 5 6 7>;
- };
-};
-
-&serdes0 {
- status = "disabled";
-};
-
-&serdes1 {
- status = "disabled";
-};
-
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
-};
-
-&ospi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <8>;
- spi-rx-bus-width = <8>;
- spi-max-frequency = <25000000>;
- cdns,tshsl-ns = <60>;
- cdns,tsd2d-ns = <60>;
- cdns,tchsh-ns = <60>;
- cdns,tslch-ns = <60>;
- cdns,read-delay = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ospi.tiboot3";
- reg = <0x0 0x80000>;
- };
-
- partition@80000 {
- label = "ospi.tispl";
- reg = <0x80000 0x200000>;
- };
-
- partition@280000 {
- label = "ospi.u-boot";
- reg = <0x280000 0x400000>;
- };
-
- partition@680000 {
- label = "ospi.env";
- reg = <0x680000 0x20000>;
- };
-
- partition@6a0000 {
- label = "ospi.env.backup";
- reg = <0x6a0000 0x20000>;
- };
-
- partition@6c0000 {
- label = "ospi.sysfw";
- reg = <0x6c0000 0x100000>;
- };
-
- partition@800000 {
- label = "ospi.rootfs";
- reg = <0x800000 0x37c0000>;
- };
-
- partition@3fe0000 {
- label = "ospi.phypattern";
- reg = <0x3fe0000 0x20000>;
- };
- };
- };
-};
-
-&mcu_cpsw {
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default>;
-};
-
-&davinci_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_mdio_pins_default>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
-};
-
-&cpsw_port1 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&phy0>;
-};
-
-&dss {
- status = "disabled";
-};
diff --git a/arch/arm/dts/k3-am654-icssg2.dtso b/arch/arm/dts/k3-am654-icssg2.dtso
deleted file mode 100644
index faefa2f..0000000
--- a/arch/arm/dts/k3-am654-icssg2.dtso
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/**
- * DT overlay for enabling ICSSG2 on AM654 EVM
- *
- * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-pinctrl.h"
-
-&{/} {
- aliases {
- ethernet1 = "/icssg2-eth/ethernet-ports/port@0";
- ethernet2 = "/icssg2-eth/ethernet-ports/port@1";
- };
-
- /* Ethernet node on PRU-ICSSG2 */
- icssg2_eth: icssg2-eth {
- compatible = "ti,am654-icssg-prueth";
- pinctrl-names = "default";
- pinctrl-0 = <&icssg2_rgmii_pins_default>;
- sram = <&msmc_ram>;
- ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
- <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
- firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
- "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
- "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
- "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
- "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
- "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
-
- ti,pruss-gp-mux-sel = <2>, /* MII mode */
- <2>,
- <2>,
- <2>, /* MII mode */
- <2>,
- <2>;
-
- ti,mii-g-rt = <&icssg2_mii_g_rt>;
- ti,mii-rt = <&icssg2_mii_rt>;
- ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
-
- interrupt-parent = <&icssg2_intc>;
- interrupts = <24 0 2>, <25 1 3>;
- interrupt-names = "tx_ts0", "tx_ts1";
-
- dmas = <&main_udmap 0xc300>, /* egress slice 0 */
- <&main_udmap 0xc301>, /* egress slice 0 */
- <&main_udmap 0xc302>, /* egress slice 0 */
- <&main_udmap 0xc303>, /* egress slice 0 */
- <&main_udmap 0xc304>, /* egress slice 1 */
- <&main_udmap 0xc305>, /* egress slice 1 */
- <&main_udmap 0xc306>, /* egress slice 1 */
- <&main_udmap 0xc307>, /* egress slice 1 */
- <&main_udmap 0x4300>, /* ingress slice 0 */
- <&main_udmap 0x4301>; /* ingress slice 1 */
-
- dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
- "tx1-0", "tx1-1", "tx1-2", "tx1-3",
- "rx0", "rx1";
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- icssg2_emac0: port@0 {
- reg = <0>;
- phy-handle = <&icssg2_phy0>;
- phy-mode = "rgmii-id";
- ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
- /* Filled in by bootloader */
- local-mac-address = [00 00 00 00 00 00];
- };
- icssg2_emac1: port@1 {
- reg = <1>;
- phy-handle = <&icssg2_phy1>;
- phy-mode = "rgmii-id";
- ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
- /* Filled in by bootloader */
- local-mac-address = [00 00 00 00 00 00];
- };
- };
- };
-};
-
-&main_pmx0 {
-
- icssg2_mdio_pins_default: icssg2-mdio-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
- AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
- >;
- };
-
- icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
- AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
- AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
- AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
- AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
- AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
- AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
- AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
- AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
- AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
- AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
- AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
-
- AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
- AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
- AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
- AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
- AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
- AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
- AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
- AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
- AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
- AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
- AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
- AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
- >;
- };
-};
-
-&icssg2_mdio {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&icssg2_mdio_pins_default>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- icssg2_phy0: ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
-
- icssg2_phy1: ethernet-phy@3 {
- reg = <3>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
-};
diff --git a/arch/arm/dts/k3-am654-industrial-thermal.dtsi b/arch/arm/dts/k3-am654-industrial-thermal.dtsi
deleted file mode 100644
index 9021c73..0000000
--- a/arch/arm/dts/k3-am654-industrial-thermal.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/thermal/thermal.h>
-
-mpu0_thermal: mpu0-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <500>; /* milliseconds */
- thermal-sensors = <&wkup_vtm0 0>;
-
- trips {
- mpu0_crit: mpu0-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
-};
-
-mpu1_thermal: mpu1-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <500>; /* milliseconds */
- thermal-sensors = <&wkup_vtm0 1>;
-
- trips {
- mpu1_crit: mpu1-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
-};
-
-mcu_thermal: mcu-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <500>; /* milliseconds */
- thermal-sensors = <&wkup_vtm0 2>;
-
- trips {
- mcu_crit: mcu-crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
- };
-};
diff --git a/arch/arm/dts/k3-am654.dtsi b/arch/arm/dts/k3-am654.dtsi
deleted file mode 100644
index 888567b..0000000
--- a/arch/arm/dts/k3-am654.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for AM6 SoC family in Quad core configuration
- *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "k3-am65.dtsi"
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu-map {
- cluster0: cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
-
- core1 {
- cpu = <&cpu1>;
- };
- };
-
- cluster1: cluster1 {
- core0 {
- cpu = <&cpu2>;
- };
-
- core1 {
- cpu = <&cpu3>;
- };
- };
- };
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53";
- reg = <0x000>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- };
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a53";
- reg = <0x001>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_0>;
- };
-
- cpu2: cpu@100 {
- compatible = "arm,cortex-a53";
- reg = <0x100>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_1>;
- };
-
- cpu3: cpu@101 {
- compatible = "arm,cortex-a53";
- reg = <0x101>;
- device_type = "cpu";
- enable-method = "psci";
- i-cache-size = <0x8000>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <0x8000>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&L2_1>;
- };
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- cache-size = <0x80000>;
- cache-line-size = <64>;
- cache-sets = <512>;
- next-level-cache = <&msmc_l3>;
- };
-
- L2_1: l2-cache1 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- cache-size = <0x80000>;
- cache-line-size = <64>;
- cache-sets = <512>;
- next-level-cache = <&msmc_l3>;
- };
-
- msmc_l3: l3-cache0 {
- compatible = "cache";
- cache-level = <3>;
- cache-unified;
- };
-
- thermal_zones: thermal-zones {
- #include "k3-am654-industrial-thermal.dtsi"
- };
-};
diff --git a/arch/arm/dts/k3-am65x-binman.dtsi b/arch/arm/dts/k3-am65x-binman.dtsi
index d0cd488..350775e 100644
--- a/arch/arm/dts/k3-am65x-binman.dtsi
+++ b/arch/arm/dts/k3-am65x-binman.dtsi
@@ -95,10 +95,10 @@
#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define SPL_AM654_EVM_DTB "spl/dts/k3-am654-base-board.dtb"
+#define SPL_AM654_EVM_DTB "spl/dts/ti/k3-am654-base-board.dtb"
#define AM654_EVM_DTB "u-boot.dtb"
-#define AM654_EVM_ICSSG2_DTBO "arch/arm/dts/k3-am654-icssg2.dtbo"
+#define AM654_EVM_ICSSG2_DTBO "ti/k3-am654-icssg2.dtbo"
&binman {
ti-spl {
diff --git a/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi b/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
index 4b8d73a..4ca05f3 100644
--- a/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
@@ -109,10 +109,6 @@
bootph-all;
};
-&ospi0 {
- status = "disabled";
-};
-
&ospi1 {
status = "disabled";
};
diff --git a/arch/arm/dts/k3-am68-sk-r5-base-board.dts b/arch/arm/dts/k3-am68-sk-r5-base-board.dts
index 3b2d7af..b61d22b 100644
--- a/arch/arm/dts/k3-am68-sk-r5-base-board.dts
+++ b/arch/arm/dts/k3-am68-sk-r5-base-board.dts
@@ -10,3 +10,8 @@
#include "k3-j721s2-ddr.dtsi"
#include "k3-am68-sk-base-board-u-boot.dtsi"
#include "k3-j721s2-r5.dtsi"
+
+&wkup_vtm0 {
+ bootph-pre-ram;
+ vdd-supply-2 = <&tps62873a>;
+};
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
index f096b10..5fc4a39 100644
--- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -23,11 +23,12 @@
<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>,
<&k3_pds 4 TI_SCI_PD_EXCLUSIVE>;
resets = <&k3_reset 202 0>;
- clocks = <&k3_clks 61 1>, <&k3_clks 202 2>;
- clock-names = "gtc", "core";
- assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>, <&k3_clks 323 0>;
- assigned-clock-parents= <0>, <0>, <&k3_clks 323 2>;
- assigned-clock-rates = <2000000000>, <200000000>;
+ clocks = <&k3_clks 61 1>, <&k3_clks 202 2>, <&k3_clks 4 1> ;
+ clock-names = "gtc", "core", "msmc";
+ assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>, <&k3_clks 4 1>,
+ <&k3_clks 323 0>;
+ assigned-clock-parents= <0>, <0>, <0>, <&k3_clks 323 2>;
+ assigned-clock-rates = <2000000000>, <200000000>, <1000000000>;
ti,sci = <&dmsc>;
ti,sci-proc-id = <32>;
ti,sci-host-id = <10>;
@@ -53,6 +54,10 @@
};
&mcu_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
clock-frequency = <250000000>;
bootph-pre-ram;
};
diff --git a/arch/arm/dts/k3-j721e-r5.dtsi b/arch/arm/dts/k3-j721e-r5.dtsi
index 688a6cf..786a41c 100644
--- a/arch/arm/dts/k3-j721e-r5.dtsi
+++ b/arch/arm/dts/k3-j721e-r5.dtsi
@@ -42,7 +42,11 @@
};
&mcu_timer0 {
- status = "okay";
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <166666666>;
bootph-pre-ram;
};
diff --git a/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts b/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts
index 506ad9b..09afdf3 100644
--- a/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts
@@ -13,6 +13,10 @@
&tps659411 {
bootph-pre-ram;
+ esm: esm {
+ compatible = "ti,tps659413-esm";
+ bootph-pre-ram;
+ };
};
&wkup_vtm0 {
diff --git a/arch/arm/dts/k3-j721s2-r5.dtsi b/arch/arm/dts/k3-j721s2-r5.dtsi
index 634676c..a820f51 100644
--- a/arch/arm/dts/k3-j721s2-r5.dtsi
+++ b/arch/arm/dts/k3-j721s2-r5.dtsi
@@ -43,6 +43,10 @@
};
&mcu_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
clock-frequency = <250000000>;
bootph-pre-ram;
};
diff --git a/arch/arm/dts/k3-j722s-r5-evm.dts b/arch/arm/dts/k3-j722s-r5-evm.dts
index 5e5c2e3..08286ed 100644
--- a/arch/arm/dts/k3-j722s-r5-evm.dts
+++ b/arch/arm/dts/k3-j722s-r5-evm.dts
@@ -77,6 +77,14 @@
};
};
+&main_timer0 {
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+ clock-frequency = <25000000>;
+};
+
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
status = "okay";
diff --git a/arch/arm/dts/k3-j784s4-r5.dtsi b/arch/arm/dts/k3-j784s4-r5.dtsi
index 0cd0ccc..a139411 100644
--- a/arch/arm/dts/k3-j784s4-r5.dtsi
+++ b/arch/arm/dts/k3-j784s4-r5.dtsi
@@ -41,7 +41,10 @@
};
&mcu_timer0 {
- status = "okay";
+ /delete-property/ clocks;
+ /delete-property/ clocks-names;
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
clock-frequency = <250000000>;
bootph-pre-ram;
};
@@ -104,3 +107,9 @@
&mcu_udmap {
ti,sci = <&dm_tifs>;
};
+
+&wkup_vtm0 {
+ bootph-pre-ram;
+ vdd-supply-2 = <&tps62873a>;
+};
+
diff --git a/arch/arm/dts/meson-a1.dtsi b/arch/arm/dts/meson-a1.dtsi
deleted file mode 100644
index 648e7f4..0000000
--- a/arch/arm/dts/meson-a1.dtsi
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
- */
-
-#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
-#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
-#include <dt-bindings/gpio/meson-a1-gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/meson-a1-power.h>
-#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
-
-/ {
- compatible = "amlogic,a1";
-
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- };
-
- l2: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
- };
-
- efuse: efuse {
- compatible = "amlogic,meson-gxbb-efuse";
- clocks = <&clkc_periphs CLKID_OTP>;
- #address-cells = <1>;
- #size-cells = <1>;
- secure-monitor = <&sm>;
- power-domains = <&pwrc PWRC_OTP_ID>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- linux,cma {
- compatible = "shared-dma-pool";
- reusable;
- size = <0x0 0x800000>;
- alignment = <0x0 0x400000>;
- linux,cma-default;
- };
- };
-
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
-
- pwrc: power-controller {
- compatible = "amlogic,meson-a1-pwrc";
- #power-domain-cells = <1>;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- spifc: spi@fd000400 {
- compatible = "amlogic,a1-spifc";
- reg = <0x0 0xfd000400 0x0 0x290>;
- clocks = <&clkc_periphs CLKID_SPIFC>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&pwrc PWRC_SPIFC_ID>;
- status = "disabled";
- };
-
- apb: bus@fe000000 {
- compatible = "simple-bus";
- reg = <0x0 0xfe000000 0x0 0x1000000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
-
- reset: reset-controller@0 {
- compatible = "amlogic,meson-a1-reset";
- reg = <0x0 0x0 0x0 0x8c>;
- #reset-cells = <1>;
- };
-
- periphs_pinctrl: pinctrl@400 {
- compatible = "amlogic,meson-a1-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio: bank@400 {
- reg = <0x0 0x0400 0x0 0x003c>,
- <0x0 0x0480 0x0 0x0118>;
- reg-names = "mux", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&periphs_pinctrl 0 0 62>;
- };
-
- i2c0_f11_pins: i2c0-f11 {
- mux {
- groups = "i2c0_sck_f11",
- "i2c0_sda_f12";
- function = "i2c0";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c0_f9_pins: i2c0-f9 {
- mux {
- groups = "i2c0_sck_f9",
- "i2c0_sda_f10";
- function = "i2c0";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_x_pins: i2c1-x {
- mux {
- groups = "i2c1_sck_x",
- "i2c1_sda_x";
- function = "i2c1";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c1_a_pins: i2c1-a {
- mux {
- groups = "i2c1_sck_a",
- "i2c1_sda_a";
- function = "i2c1";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_x0_pins: i2c2-x0 {
- mux {
- groups = "i2c2_sck_x0",
- "i2c2_sda_x1";
- function = "i2c2";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_x15_pins: i2c2-x15 {
- mux {
- groups = "i2c2_sck_x15",
- "i2c2_sda_x16";
- function = "i2c2";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_a4_pins: i2c2-a4 {
- mux {
- groups = "i2c2_sck_a4",
- "i2c2_sda_a5";
- function = "i2c2";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c2_a8_pins: i2c2-a8 {
- mux {
- groups = "i2c2_sck_a8",
- "i2c2_sda_a9";
- function = "i2c2";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_x_pins: i2c3-x {
- mux {
- groups = "i2c3_sck_x",
- "i2c3_sda_x";
- function = "i2c3";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- i2c3_f_pins: i2c3-f {
- mux {
- groups = "i2c3_sck_f",
- "i2c3_sda_f";
- function = "i2c3";
- bias-pull-up;
- drive-strength-microamp = <3000>;
- };
- };
-
- uart_a_pins: uart-a {
- mux {
- groups = "uart_a_tx",
- "uart_a_rx";
- function = "uart_a";
- };
- };
-
- uart_a_cts_rts_pins: uart-a-cts-rts {
- mux {
- groups = "uart_a_cts",
- "uart_a_rts";
- function = "uart_a";
- bias-pull-down;
- };
- };
-
- sdio_pins: sdio {
- mux0 {
- groups = "sdcard_d0_x",
- "sdcard_d1_x",
- "sdcard_d2_x",
- "sdcard_d3_x",
- "sdcard_cmd_x";
- function = "sdcard";
- bias-pull-up;
- };
-
- mux1 {
- groups = "sdcard_clk_x";
- function = "sdcard";
- bias-disable;
- };
- };
-
- sdio_clk_gate_pins: sdio-clk-gate {
- mux {
- groups = "sdcard_clk_x";
- function = "sdcard";
- bias-pull-down;
- };
- };
-
- spifc_pins: spifc {
- mux {
- groups = "spif_mo",
- "spif_mi",
- "spif_clk",
- "spif_cs",
- "spif_hold_n",
- "spif_wp_n";
- function = "spif";
- };
- };
- };
-
- gpio_intc: interrupt-controller@440 {
- compatible = "amlogic,meson-a1-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x0440 0x0 0x14>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts =
- <49 50 51 52 53 54 55 56>;
- };
-
- clkc_periphs: clock-controller@800 {
- compatible = "amlogic,a1-peripherals-clkc";
- reg = <0 0x800 0 0x104>;
- #clock-cells = <1>;
- clocks = <&clkc_pll CLKID_FCLK_DIV2>,
- <&clkc_pll CLKID_FCLK_DIV3>,
- <&clkc_pll CLKID_FCLK_DIV5>,
- <&clkc_pll CLKID_FCLK_DIV7>,
- <&clkc_pll CLKID_HIFI_PLL>,
- <&xtal>;
- clock-names = "fclk_div2", "fclk_div3",
- "fclk_div5", "fclk_div7",
- "hifi_pll", "xtal";
- };
-
- i2c0: i2c@1400 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x1400 0x0 0x20>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc_periphs CLKID_I2C_M_A>;
- power-domains = <&pwrc PWRC_I2C_ID>;
- };
-
- uart_AO: serial@1c00 {
- compatible = "amlogic,meson-a1-uart",
- "amlogic,meson-ao-uart";
- reg = <0x0 0x1c00 0x0 0x18>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_AO_B: serial@2000 {
- compatible = "amlogic,meson-a1-uart",
- "amlogic,meson-ao-uart";
- reg = <0x0 0x2000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- saradc: adc@2c00 {
- compatible = "amlogic,meson-g12a-saradc",
- "amlogic,meson-saradc";
- reg = <0x0 0x2c00 0x0 0x48>;
- #io-channel-cells = <1>;
- power-domains = <&pwrc PWRC_I2C_ID>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>,
- <&clkc_periphs CLKID_SARADC_EN>,
- <&clkc_periphs CLKID_SARADC>,
- <&clkc_periphs CLKID_SARADC_SEL>;
- clock-names = "clkin", "core",
- "adc_clk", "adc_sel";
- status = "disabled";
- };
-
- i2c1: i2c@5c00 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x5c00 0x0 0x20>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc_periphs CLKID_I2C_M_B>;
- power-domains = <&pwrc PWRC_I2C_ID>;
- };
-
- i2c2: i2c@6800 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x6800 0x0 0x20>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc_periphs CLKID_I2C_M_C>;
- power-domains = <&pwrc PWRC_I2C_ID>;
- };
-
- i2c3: i2c@6c00 {
- compatible = "amlogic,meson-axg-i2c";
- status = "disabled";
- reg = <0x0 0x6c00 0x0 0x20>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc_periphs CLKID_I2C_M_D>;
- power-domains = <&pwrc PWRC_I2C_ID>;
- };
-
- usb2_phy1: phy@4000 {
- compatible = "amlogic,a1-usb2-phy";
- clocks = <&clkc_periphs CLKID_USB_PHY_IN>;
- clock-names = "xtal";
- reg = <0x0 0x4000 0x0 0x60>;
- resets = <&reset RESET_USBPHY>;
- reset-names = "phy";
- #phy-cells = <0>;
- power-domains = <&pwrc PWRC_USB_ID>;
- };
-
- hwrng: rng@5118 {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x5118 0x0 0x4>;
- power-domains = <&pwrc PWRC_OTP_ID>;
- };
-
- sec_AO: ao-secure@5a20 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x5a20 0x0 0x140>;
- amlogic,has-chip-id;
- };
-
- clkc_pll: pll-clock-controller@7c80 {
- compatible = "amlogic,a1-pll-clkc";
- reg = <0 0x7c80 0 0x18c>;
- #clock-cells = <1>;
- clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
- <&clkc_periphs CLKID_HIFIPLL_IN>;
- clock-names = "fixpll_in", "hifipll_in";
- };
-
- sd_emmc: sd@10000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x10000 0x0 0x800>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc_periphs CLKID_SD_EMMC_A>,
- <&clkc_periphs CLKID_SD_EMMC>,
- <&clkc_pll CLKID_FCLK_DIV2>;
- clock-names = "core",
- "clkin0",
- "clkin1";
- assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>;
- assigned-clock-parents = <&xtal>;
- resets = <&reset RESET_SD_EMMC_A>;
- power-domains = <&pwrc PWRC_SD_EMMC_ID>;
- status = "disabled";
- };
- };
-
- usb: usb@fe004400 {
- status = "disabled";
- compatible = "amlogic,meson-a1-usb-ctrl";
- reg = <0x0 0xfe004400 0x0 0xa0>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&clkc_periphs CLKID_USB_CTRL>,
- <&clkc_periphs CLKID_USB_BUS>,
- <&clkc_periphs CLKID_USB_CTRL_IN>;
- clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
- resets = <&reset RESET_USBCTRL>;
- reset-name = "usb_ctrl";
-
- dr_mode = "otg";
-
- phys = <&usb2_phy1>;
- phy-names = "usb2-phy1";
-
- dwc3: usb@ff400000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xff400000 0x0 0x100000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,dis_u2_susphy_quirk;
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,parkmode-disable-ss-quirk;
- };
-
- dwc2: usb@ff500000 {
- compatible = "amlogic,meson-a1-usb", "snps,dwc2";
- reg = <0x0 0xff500000 0x0 0x40000>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy1>;
- phy-names = "usb2-phy";
- clocks = <&clkc_periphs CLKID_USB_PHY>;
- clock-names = "otg";
- dr_mode = "peripheral";
- g-rx-fifo-size = <192>;
- g-np-tx-fifo-size = <128>;
- g-tx-fifo-size = <128 128 16 16 16>;
- };
- };
-
- gic: interrupt-controller@ff901000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xff901000 0x0 0x1000>,
- <0x0 0xff902000 0x0 0x2000>,
- <0x0 0xff904000 0x0 0x2000>,
- <0x0 0xff906000 0x0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-};
diff --git a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
index c3704d7..531767c 100644
--- a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
+++ b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi
@@ -13,6 +13,14 @@
};
};
+&avb1 {
+ status = "disabled";
+};
+
+&avb2 {
+ status = "disabled";
+};
+
&rpc {
flash@0 {
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi
old mode 100755
new mode 100644
diff --git a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
old mode 100755
new mode 100644
diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts
old mode 100755
new mode 100644
diff --git a/arch/arm/dts/zynqmp-binman-mini.dts b/arch/arm/dts/zynqmp-binman-mini.dts
new file mode 100644
index 0000000..8f3d18e
--- /dev/null
+++ b/arch/arm/dts/zynqmp-binman-mini.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-u-boot.dtsi"
diff --git a/arch/arm/dts/zynqmp-binman-som.dts b/arch/arm/dts/zynqmp-binman-som.dts
new file mode 100644
index 0000000..3d9d847
--- /dev/null
+++ b/arch/arm/dts/zynqmp-binman-som.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SOMs (k24/k26)
+ *
+ * (C) Copyright 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <config.h>
+
+/dts-v1/;
+/ {
+ binman: binman {
+ multiple-images;
+ fit-dtb.blob {
+ filename = "fit-dtb.blob";
+ pad-byte = <0>;
+ fit {
+ fit,align = <0x8>;
+ fit,external-offset = <0x0>;
+ description = "DTBs for SOMs+CCs";
+ fit,fdt-list-val = "zynqmp-smk-k26-revA", "zynqmp-smk-k26-revA-sck-kr-g-revA",
+ "zynqmp-smk-k26-revA-sck-kr-g-revB", "zynqmp-smk-k26-revA-sck-kv-g-revA",
+ "zynqmp-smk-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kv-g-revA",
+ "zynqmp-sm-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kr-g-revB",
+ "zynqmp-smk-k24-revA-sck-kd-g-revA", "zynqmp-smk-k24-revA-sck-kv-g-revB",
+ "zynqmp-smk-k24-revA-sck-kr-g-revB", "zynqmp-sm-k24-revA-sck-kd-g-revA",
+ "zynqmp-sm-k24-revA-sck-kv-g-revB", "zynqmp-sm-k24-revA-sck-kr-g-revB";
+
+ images {
+ @fdt-SEQ {
+ description = "NAME";
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ hash-1 {
+ algo = "md5";
+ };
+ };
+ };
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "SOM itself";
+ fdt = "fdt-1";
+ };
+ conf-2 {
+ description = "zynqmp-smk-k26-.*-sck-kr-g-revA";
+ fdt = "fdt-2";
+ };
+ conf-3 {
+ description = "zynqmp-smk-k26-.*-sck-kr-g-.*";
+ fdt = "fdt-3";
+ };
+ conf-4 {
+ description = "zynqmp-smk-k26-.*-sck-kv-g-rev[AZ]";
+ fdt = "fdt-4";
+ };
+ conf-5 {
+ description = "zynqmp-smk-k26-.*-sck-kv-g-.*";
+ fdt = "fdt-5";
+ };
+ conf-6 {
+ description = "zynqmp-sm-k26-.*-sck-kv-g-rev[AZ]";
+ fdt = "fdt-6";
+ };
+ conf-7 {
+ description = "zynqmp-sm-k26-.*-sck-kv-g-.*";
+ fdt = "fdt-7";
+ };
+ conf-8 {
+ description = "zynqmp-sm-k26-.*-sck-kr-g-.*";
+ fdt = "fdt-8";
+ };
+ conf-9 {
+ description = "zynqmp-smk-k24-.*-sck-kd-g-.*";
+ fdt = "fdt-9";
+ };
+ conf-10 {
+ description = "zynqmp-smk-k24-.*-sck-kv-g-.*";
+ fdt = "fdt-10";
+ };
+ conf-11 {
+ description = "zynqmp-smk-k24-.*-sck-kr-g-.*";
+ fdt = "fdt-11";
+ };
+ conf-12 {
+ description = "zynqmp-sm-k24-.*-sck-kd-g-.*";
+ fdt = "fdt-12";
+ };
+ conf-13 {
+ description = "zynqmp-sm-k24-.*-sck-kv-g-.*";
+ fdt = "fdt-13";
+ };
+ conf-14 {
+ description = "zynqmp-sm-k24-.*-sck-kr-g-.*";
+ fdt = "fdt-14";
+ };
+ };
+ };
+ };
+
+ /* u-boot.itb generation in a static way */
+ itb {
+ filename = "u-boot.itb";
+ pad-byte = <0>;
+
+ fit {
+ description = "Configuration for Xilinx ZynqMP SoC";
+ fit,align = <0x8>;
+ fit,external-offset = <0x0>;
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ type = "firmware";
+ os = "u-boot";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_TEXT_BASE>;
+ entry = /bits/ 64 <CONFIG_TEXT_BASE>;
+ hash {
+ algo = "md5";
+ };
+ u-boot-nodtb {
+ };
+ };
+ atf {
+ description = "Trusted Firmware-A";
+ type = "firmware";
+ os = "arm-trusted-firmware";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ hash {
+ algo = "md5";
+ };
+ atf-bl31 {
+ optional;
+ };
+ };
+ tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ tee-os {
+ optional;
+ };
+ };
+ fdt {
+ description = "Multi DTB fit image";
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ load = <0x0 0x100000>;
+ hash {
+ algo = "md5";
+ };
+ fdt-blob {
+ filename = "fit-dtb.blob";
+ type = "blob-ext";
+ };
+ };
+ };
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "Multi DTB with TF-A/TEE";
+ firmware = "atf";
+ loadables = "tee", "uboot", "fdt";
+ };
+ };
+ };
+ };
+
+ /* boot.bin generated with version string inside */
+ bootimage {
+ filename = "boot.bin";
+ pad-byte = <0>;
+
+ blob-ext@1 {
+ offset = <0x0>;
+ filename = "spl/boot.bin";
+ };
+ /* Optional version string at offset 0x70 */
+ blob-ext@2 {
+ offset = <0x70>;
+ filename = "version.bin";
+ overlap;
+ optional;
+ };
+ /* Optional version string at offset 0x94 */
+ blob-ext@3 {
+ offset = <0x94>;
+ filename = "version.bin";
+ overlap;
+ optional;
+ };
+ };
+
+#ifdef CONFIG_SYS_SPI_U_BOOT_OFFS
+ /* Full QSPI image for recovery app */
+ image {
+ filename = "qspi.bin";
+ pad-byte = <0>;
+
+ blob-ext@1 {
+ offset = <0x0>;
+ filename = "boot.bin";
+ };
+ blob-ext@2 {
+ offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>;
+ filename = "u-boot.itb";
+ };
+ fdtmap {
+ };
+ };
+#endif
+ };
+};
diff --git a/arch/arm/dts/zynqmp-binman.dts b/arch/arm/dts/zynqmp-binman.dts
new file mode 100644
index 0000000..675f6bf
--- /dev/null
+++ b/arch/arm/dts/zynqmp-binman.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP platforms
+ *
+ * (C) Copyright 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <config.h>
+
+/dts-v1/;
+/ {
+ binman: binman {
+ multiple-images;
+
+ /* u-boot.itb generation in a static way */
+ itb {
+ filename = "u-boot.itb";
+ pad-byte = <0>;
+
+ fit {
+ description = "Configuration for Xilinx ZynqMP SoC";
+ fit,align = <0x8>;
+ fit,external-offset = <0x0>;
+ fit,fdt-list = "of-list";
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ type = "firmware";
+ os = "u-boot";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_TEXT_BASE>;
+ entry = /bits/ 64 <CONFIG_TEXT_BASE>;
+ hash {
+ algo = "md5";
+ };
+ u-boot-nodtb {
+ };
+ };
+ atf {
+ description = "Trusted Firmware-A";
+ type = "firmware";
+ os = "arm-trusted-firmware";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ hash {
+ algo = "md5";
+ };
+ atf-bl31 {
+ optional;
+ };
+ };
+ tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ tee-os {
+ optional;
+ };
+ };
+ @fdt-SEQ {
+ description = "NAME";
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ load = <0x0 0x100000>;
+ hash-1 {
+ algo = "md5";
+ };
+ };
+ };
+ configurations {
+ default = "@conf-DEFAULT-SEQ";
+ @conf-SEQ {
+ description = "NAME";
+ firmware = "atf";
+ loadables = "tee", "uboot";
+ fdt = "fdt-SEQ";
+ };
+ };
+ };
+ };
+
+ itb-single {
+ filename = "u-boot-single.itb";
+ pad-byte = <0>;
+
+ fit {
+ description = "Configuration for Xilinx ZynqMP SoC";
+ fit,align = <0x8>;
+ fit,external-offset = <0x0>;
+ fit,fdt-list = "of-list";
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ type = "firmware";
+ os = "u-boot";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_TEXT_BASE>;
+ entry = /bits/ 64 <CONFIG_TEXT_BASE>;
+ hash {
+ algo = "md5";
+ };
+ u-boot-nodtb {
+ };
+ };
+ atf {
+ description = "Trusted Firmware-A";
+ type = "firmware";
+ os = "arm-trusted-firmware";
+ arch = "arm64";
+ compression = "none";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ hash {
+ algo = "md5";
+ };
+ atf-bl31 {
+ optional;
+ };
+ };
+ tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>;
+ tee-os {
+ optional;
+ };
+ };
+ fdt {
+ description = "DT";
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ load = <0x0 0x100000>;
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ hash-1 {
+ algo = "md5";
+ };
+
+ };
+ };
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "Single DT";
+ firmware = "atf";
+ loadables = "tee", "uboot";
+ fdt = "fdt";
+ };
+ };
+ };
+ };
+
+#ifdef CONFIG_SYS_SPI_U_BOOT_OFFS
+ /* QSPI image for testing QSPI boot mode */
+ image {
+ filename = "qspi.bin";
+ pad-byte = <0>;
+
+ blob-ext@1 {
+ offset = <0x0>;
+ filename = "spl/boot.bin";
+ };
+ blob-ext@2 {
+ offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>;
+ filename = "u-boot.itb";
+ };
+ fdtmap {
+ };
+ };
+
+ image-single {
+ filename = "qspi-single.bin";
+ pad-byte = <0>;
+
+ blob-ext@1 {
+ offset = <0x0>;
+ filename = "spl/boot.bin";
+ };
+ blob-ext@2 {
+ offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>;
+ filename = "u-boot-single.itb";
+ };
+ fdtmap {
+ };
+ };
+#endif
+ };
+};
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index dd4569e..60d1b1a 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -70,6 +70,22 @@
clocks = <&zynqmp_clk ACPU>;
};
+&cpu0_debug {
+ clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu1_debug {
+ clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu2_debug {
+ clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu3_debug {
+ clocks = <&zynqmp_clk DBF_FPD>;
+};
+
&fpd_dma_chan1 {
clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
diff --git a/arch/arm/dts/zynqmp-sc-revB.dts b/arch/arm/dts/zynqmp-sc-revB.dts
index 1af3f64..c4f7058 100644
--- a/arch/arm/dts/zynqmp-sc-revB.dts
+++ b/arch/arm/dts/zynqmp-sc-revB.dts
@@ -3,7 +3,7 @@
* dts file for Xilinx ZynqMP Generic System Controller
*
* (C) Copyright 2021 - 2022, Xilinx, Inc.
- * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ * (C) Copyright 2022 - 2024, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
@@ -80,7 +80,7 @@
pwm-fan {
compatible = "pwm-fan";
status = "okay";
- pwms = <&ttc0 2 40000 1>;
+ pwms = <&ttc0 2 40000 0>;
};
};
diff --git a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
index 4de29d5..d56e863 100644
--- a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
@@ -80,7 +80,10 @@
"", "";
};
- /* usb5744@2d */
+ hub: usb-hub@2d { /* u36 */
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
/* USB 3.0 */
@@ -99,18 +102,6 @@
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
assigned-clock-rates = <250000000>, <20000000>;
-#if 0
- usbhub0: usb-hub { /* u36 */
- i2c-bus = <&i2c1>;
- compatible = "microchip,usb5744";
- reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
- };
-
- usb2244: usb-sd { /* u41 */
- compatible = "microchip,usb2244";
- reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_0 {
@@ -118,6 +109,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
};
&gem1 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index 6349a0e..9d0c0c2 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -105,11 +105,19 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ hub_1: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
usbhub_i2c1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ hub_2: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
/* Bus 2/3 are not connected */
};
@@ -145,18 +153,6 @@
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
assigned-clock-rates = <250000000>, <20000000>;
-#if 0
- usbhub0: usb-hub { /* u43 */
- i2c-bus = <&usbhub_i2c0>;
- compatible = "microchip,usb5744";
- reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
- };
-
- usb2244: usb-sd { /* u38 */
- compatible = "microchip,usb2244";
- reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_0 {
@@ -164,6 +160,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
};
&usb1 { /* mio64 - mio75 */
@@ -174,13 +190,6 @@
phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
assigned-clock-rates = <250000000>, <20000000>;
-#if 0
- usbhub1: usb-hub { /* u84 */
- i2c-bus = <&usbhub_i2c1>;
- compatible = "microchip,usb5744";
- reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_1 {
@@ -188,6 +197,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
};
&gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index b0d737d..0d915d4 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -117,11 +117,19 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ hub_1: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
usbhub_i2c1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ hub_2: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
};
/* Bus 2/3 are not connected */
};
@@ -165,18 +173,6 @@
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
assigned-clock-rates = <250000000>, <20000000>;
-#if 0
- usbhub0: usb-hub { /* u43 */
- i2c-bus = <&usbhub_i2c0>;
- compatible = "microchip,usb5744";
- reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
- };
-
- usb2244: usb-sd { /* u38 */
- compatible = "microchip,usb2244";
- reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_0 {
@@ -184,6 +180,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
};
&usb1 { /* mio64 - mio75 */
@@ -194,14 +210,6 @@
phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
assigned-clock-rates = <250000000>, <20000000>;
-
-#if 0
- usbhub1: usb-hub { /* u84 */
- i2c-bus = <&usbhub_i2c1>;
- compatible = "microchip,usb5744";
- reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_1 {
@@ -209,6 +217,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
};
&gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index 561b546..a98a888 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -129,12 +129,6 @@
pinctrl-0 = <&pinctrl_usb0_default>;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
-#if 0
- usbhub: usb5744 { /* u43 */
- compatible = "microchip,usb5744";
- reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_0 {
@@ -142,6 +136,24 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 64683e0..7490efe 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -92,7 +92,10 @@
label = "ina260-u14";
reg = <0x40>;
};
- /* u43 - 0x2d - USB hub */
+ hub: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
};
@@ -131,14 +134,6 @@
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
assigned-clock-rates = <250000000>, <20000000>;
-#if 0
- usb5744: usb-hub { /* u43 */
- status = "okay";
- compatible = "microchip,usb5744";
- i2c-bus = <&i2c1>;
- reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
-#endif
};
&dwc3_0 {
@@ -146,6 +141,26 @@
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index 8056f6b..620f518 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -3,7 +3,7 @@
* dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A
*
* (C) Copyright 2020 - 2021, Xilinx, Inc.
- * (C) Copyright 2023, Advanced Micro Devices, Inc.
+ * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
@@ -387,6 +387,7 @@
&rtc {
status = "okay";
+ calibration = <0x7fff>;
};
&lpd_dma_chan1 {
diff --git a/arch/arm/dts/zynqmp-smk-k26-revA.dts b/arch/arm/dts/zynqmp-smk-k26-revA.dts
index 719a4e4..b804abe 100644
--- a/arch/arm/dts/zynqmp-smk-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-smk-k26-revA.dts
@@ -3,7 +3,7 @@
* dts file for Xilinx ZynqMP SMK-K26 rev2/1/B/A
*
* (C) Copyright 2020 - 2021, Xilinx, Inc.
- * (C) Copyright 2023, Advanced Micro Devices, Inc.
+ * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
diff --git a/arch/arm/dts/zynqmp-u-boot.dtsi b/arch/arm/dts/zynqmp-u-boot.dtsi
new file mode 100644
index 0000000..9a7527e
--- /dev/null
+++ b/arch/arm/dts/zynqmp-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/ {
+ binman: binman {
+ };
+};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 3132fa5..dd63d22 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -960,6 +960,7 @@
&pcie {
status = "okay";
+ phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>;
};
&psgtr {
diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts
index 095c972..b75b2a7 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -15,8 +15,7 @@
/ {
model = "ZynqMP ZCU1275 RevA";
- compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275",
- "xlnx,zynqmp";
+ compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", "xlnx,zynqmp";
aliases {
serial0 = &uart0;
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 6a29f61..70ca5e6 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -168,8 +168,8 @@
bootph-all;
};
- pmu: pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
@@ -441,6 +441,34 @@
};
};
+ cpu0_debug: debug@fec10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0xfec10000 0x0 0x1000>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu0>;
+ };
+
+ cpu1_debug: debug@fed10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0xfed10000 0x0 0x1000>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu1>;
+ };
+
+ cpu2_debug: debug@fee10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0xfee10000 0x0 0x1000>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu2>;
+ };
+
+ cpu3_debug: debug@fef10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x0 0xfef10000 0x0 0x1000>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu3>;
+ };
+
/* GDMA */
fpd_dma_chan1: dma-controller@fd500000 {
status = "disabled";
@@ -885,7 +913,6 @@
power-domains = <&zynqmp_firmware PD_SATA>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
/* iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; */
- /* dma-coherent; */
};
sdhci0: mmc@ff160000 {
@@ -1065,9 +1092,9 @@
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ref";
/* iommus = <&smmu 0x860>; */
snps,quirk-frame-length-adjustment = <0x20>;
- clock-names = "ref";
snps,resume-hs-terminations;
/* dma-coherent; */
};
@@ -1097,9 +1124,9 @@
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ref";
/* iommus = <&smmu 0x861>; */
snps,quirk-frame-length-adjustment = <0x20>;
- clock-names = "ref";
snps,resume-hs-terminations;
/* dma-coherent; */
};
@@ -1176,11 +1203,14 @@
"dp_vtc_pixel_clk_in";
power-domains = <&zynqmp_firmware PD_DP>;
resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
- dma-names = "vid0", "vid1", "vid2", "gfx0";
+ dma-names = "vid0", "vid1", "vid2", "gfx0",
+ "aud0", "aud1";
dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
- <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+ <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
ports {
#address-cells = <1>;
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index b0468a1..0d7a573 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -71,6 +71,11 @@
#define MXC_CPU_IMX9302 0xC9 /* dummy ID */
#define MXC_CPU_IMX9301 0xCA /* dummy ID */
+#define MXC_CPU_IMX91 0xCB /* dummy ID */
+#define MXC_CPU_IMX9121 0xCC /* dummy ID */
+#define MXC_CPU_IMX9111 0xCD /* dummy ID */
+#define MXC_CPU_IMX9101 0xCE /* dummy ID */
+
#define MXC_SOC_MX6 0x60
#define MXC_SOC_MX7 0x70
#define MXC_SOC_IMX8M 0x80
diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h
index 76f1211..60d48b1 100644
--- a/arch/arm/include/asm/arch-imx9/clock.h
+++ b/arch/arm/include/asm/arch-imx9/clock.h
@@ -205,10 +205,17 @@
u32 mux_type;
};
+enum clk_soc {
+ CLK_SOC_ALL = 0,
+ CLK_SOC_IMX93 = 1,
+ CLK_SOC_IMX91 = 2,
+};
+
struct imx_clk_setting {
u32 clk_root;
enum ccm_clk_src src;
u32 div;
+ enum clk_soc soc;
};
int clock_init_early(void);
diff --git a/arch/arm/include/asm/arch-imx9/gpio.h b/arch/arm/include/asm/arch-imx9/gpio.h
index 4073202..ca763f5 100644
--- a/arch/arm/include/asm/arch-imx9/gpio.h
+++ b/arch/arm/include/asm/arch-imx9/gpio.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARCH_IMX9_GPIO_H
#define __ASM_ARCH_IMX9_GPIO_H
+#include <linux/types.h>
+
struct gpio_regs {
u32 gpio_pdor;
u32 gpio_psor;
diff --git a/arch/arm/include/asm/arch-imx9/imx91_pins.h b/arch/arm/include/asm/arch-imx9/imx91_pins.h
new file mode 100644
index 0000000..2624670
--- /dev/null
+++ b/arch/arm/include/asm/arch-imx9/imx91_pins.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX91_PINS_H__
+#define __ASM_ARCH_IMX91_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+ MX91_PAD_DAP_TDI__JTAG_MUX_TDI = IOMUX_PAD(0x01B0, 0x0000, 0x00, 0x03D8, 0x00, 0x00),
+ MX91_PAD_DAP_TDI__MQS2_LEFT = IOMUX_PAD(0x01B0, 0x0000, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDI__CAN2_TX = IOMUX_PAD(0x01B0, 0x0000, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30 = IOMUX_PAD(0x01B0, 0x0000, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDI__GPIO3_IO28 = IOMUX_PAD(0x01B0, 0x0000, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDI__LPUART5_RX = IOMUX_PAD(0x01B0, 0x0000, 0x06, 0x0488, 0x00, 0x00),
+
+ MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS = IOMUX_PAD(0x01B4, 0x0004, 0x00, 0x03DC, 0x00, 0x00),
+ MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 = IOMUX_PAD(0x01B4, 0x0004, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29 = IOMUX_PAD(0x01B4, 0x0004, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B = IOMUX_PAD(0x01B4, 0x0004, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK = IOMUX_PAD(0x01B8, 0x0008, 0x00, 0x03D4, 0x00, 0x00),
+ MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 = IOMUX_PAD(0x01B8, 0x0008, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 = IOMUX_PAD(0x01B8, 0x0008, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B = IOMUX_PAD(0x01B8, 0x0008, 0x06, 0x0484, 0x00, 0x00),
+
+ MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO = IOMUX_PAD(0x01BC, 0x000C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT = IOMUX_PAD(0x01BC, 0x000C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX = IOMUX_PAD(0x01BC, 0x000C, 0x03, 0x0364, 0x00, 0x00),
+ MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 = IOMUX_PAD(0x01BC, 0x000C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 = IOMUX_PAD(0x01BC, 0x000C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX = IOMUX_PAD(0x01BC, 0x000C, 0x06, 0x048C, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO00__GPIO2_IO0 = IOMUX_PAD(0x01C0, 0x0010, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__LPI2C3_SDA = IOMUX_PAD(0x01C0, 0x0010, 0x01, 0x03F4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK = IOMUX_PAD(0x01C0, 0x0010, 0x02, 0x04BC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK = IOMUX_PAD(0x01C0, 0x0010, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__LPSPI6_PCS0 = IOMUX_PAD(0x01C0, 0x0010, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__LPUART5_TX = IOMUX_PAD(0x01C0, 0x0010, 0x05, 0x048C, 0x01, 0x00),
+ MX91_PAD_GPIO_IO00__LPI2C5_SDA = IOMUX_PAD(0x01C0, 0x0010, 0x06, 0x0404, 0x00, 0x00),
+ MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0 = IOMUX_PAD(0x01C0, 0x0010, 0x07, 0x036C, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO01__GPIO2_IO1 = IOMUX_PAD(0x01C4, 0x0014, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__LPI2C3_SCL = IOMUX_PAD(0x01C4, 0x0014, 0x01, 0x03F0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0 = IOMUX_PAD(0x01C4, 0x0014, 0x02, 0x0490, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE = IOMUX_PAD(0x01C4, 0x0014, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__LPSPI6_SIN = IOMUX_PAD(0x01C4, 0x0014, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__LPUART5_RX = IOMUX_PAD(0x01C4, 0x0014, 0x05, 0x0488, 0x01, 0x00),
+ MX91_PAD_GPIO_IO01__LPI2C5_SCL = IOMUX_PAD(0x01C4, 0x0014, 0x06, 0x0400, 0x00, 0x00),
+ MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1 = IOMUX_PAD(0x01C4, 0x0014, 0x07, 0x0370, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO02__GPIO2_IO2 = IOMUX_PAD(0x01C8, 0x0018, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__LPI2C4_SDA = IOMUX_PAD(0x01C8, 0x0018, 0x01, 0x03FC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC = IOMUX_PAD(0x01C8, 0x0018, 0x02, 0x04C0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC = IOMUX_PAD(0x01C8, 0x0018, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__LPSPI6_SOUT = IOMUX_PAD(0x01C8, 0x0018, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__LPUART5_CTS_B = IOMUX_PAD(0x01C8, 0x0018, 0x05, 0x0484, 0x01, 0x00),
+ MX91_PAD_GPIO_IO02__LPI2C6_SDA = IOMUX_PAD(0x01C8, 0x0018, 0x06, 0x040C, 0x00, 0x00),
+ MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2 = IOMUX_PAD(0x01C8, 0x0018, 0x07, 0x0374, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO03__GPIO2_IO3 = IOMUX_PAD(0x01CC, 0x001C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__LPI2C4_SCL = IOMUX_PAD(0x01CC, 0x001C, 0x01, 0x03F8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC = IOMUX_PAD(0x01CC, 0x001C, 0x02, 0x04B8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC = IOMUX_PAD(0x01CC, 0x001C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__LPSPI6_SCK = IOMUX_PAD(0x01CC, 0x001C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__LPUART5_RTS_B = IOMUX_PAD(0x01CC, 0x001C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__LPI2C6_SCL = IOMUX_PAD(0x01CC, 0x001C, 0x06, 0x0408, 0x00, 0x00),
+ MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3 = IOMUX_PAD(0x01CC, 0x001C, 0x07, 0x0378, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO04__GPIO2_IO4 = IOMUX_PAD(0x01D0, 0x0020, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__TPM3_CH0 = IOMUX_PAD(0x01D0, 0x0020, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__PDM_CLK = IOMUX_PAD(0x01D0, 0x0020, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 = IOMUX_PAD(0x01D0, 0x0020, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__LPSPI7_PCS0 = IOMUX_PAD(0x01D0, 0x0020, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__LPUART6_TX = IOMUX_PAD(0x01D0, 0x0020, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO04__LPI2C6_SDA = IOMUX_PAD(0x01D0, 0x0020, 0x06, 0x040C, 0x01, 0x00),
+ MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4 = IOMUX_PAD(0x01D0, 0x0020, 0x07, 0x037C, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO05__GPIO2_IO5 = IOMUX_PAD(0x01D4, 0x0024, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__TPM4_CH0 = IOMUX_PAD(0x01D4, 0x0024, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0 = IOMUX_PAD(0x01D4, 0x0024, 0x02, 0x04C4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 = IOMUX_PAD(0x01D4, 0x0024, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__LPSPI7_SIN = IOMUX_PAD(0x01D4, 0x0024, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__LPUART6_RX = IOMUX_PAD(0x01D4, 0x0024, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO05__LPI2C6_SCL = IOMUX_PAD(0x01D4, 0x0024, 0x06, 0x0408, 0x01, 0x00),
+ MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5 = IOMUX_PAD(0x01D4, 0x0024, 0x07, 0x0380, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO06__GPIO2_IO6 = IOMUX_PAD(0x01D8, 0x0028, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__TPM5_CH0 = IOMUX_PAD(0x01D8, 0x0028, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1 = IOMUX_PAD(0x01D8, 0x0028, 0x02, 0x04C8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 = IOMUX_PAD(0x01D8, 0x0028, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__LPSPI7_SOUT = IOMUX_PAD(0x01D8, 0x0028, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__LPUART6_CTS_B = IOMUX_PAD(0x01D8, 0x0028, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__LPI2C7_SDA = IOMUX_PAD(0x01D8, 0x0028, 0x06, 0x0414, 0x00, 0x00),
+ MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6 = IOMUX_PAD(0x01D8, 0x0028, 0x07, 0x0384, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO07__GPIO2_IO7 = IOMUX_PAD(0x01DC, 0x002C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__LPSPI3_PCS1 = IOMUX_PAD(0x01DC, 0x002C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1 = IOMUX_PAD(0x01DC, 0x002C, 0x02, 0x0494, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 = IOMUX_PAD(0x01DC, 0x002C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__LPSPI7_SCK = IOMUX_PAD(0x01DC, 0x002C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__LPUART6_RTS_B = IOMUX_PAD(0x01DC, 0x002C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__LPI2C7_SCL = IOMUX_PAD(0x01DC, 0x002C, 0x06, 0x0410, 0x00, 0x00),
+ MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7 = IOMUX_PAD(0x01DC, 0x002C, 0x07, 0x0388, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO08__GPIO2_IO8 = IOMUX_PAD(0x01E0, 0x0030, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__LPSPI3_PCS0 = IOMUX_PAD(0x01E0, 0x0030, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2 = IOMUX_PAD(0x01E0, 0x0030, 0x02, 0x0498, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 = IOMUX_PAD(0x01E0, 0x0030, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__TPM6_CH0 = IOMUX_PAD(0x01E0, 0x0030, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__LPUART7_TX = IOMUX_PAD(0x01E0, 0x0030, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO08__LPI2C7_SDA = IOMUX_PAD(0x01E0, 0x0030, 0x06, 0x0414, 0x01, 0x00),
+ MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8 = IOMUX_PAD(0x01E0, 0x0030, 0x07, 0x038C, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO09__GPIO2_IO9 = IOMUX_PAD(0x01E4, 0x0034, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__LPSPI3_SIN = IOMUX_PAD(0x01E4, 0x0034, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3 = IOMUX_PAD(0x01E4, 0x0034, 0x02, 0x049C, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 = IOMUX_PAD(0x01E4, 0x0034, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__TPM3_EXTCLK = IOMUX_PAD(0x01E4, 0x0034, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__LPUART7_RX = IOMUX_PAD(0x01E4, 0x0034, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO09__LPI2C7_SCL = IOMUX_PAD(0x01E4, 0x0034, 0x06, 0x0410, 0x01, 0x00),
+ MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9 = IOMUX_PAD(0x01E4, 0x0034, 0x07, 0x0390, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO10__GPIO2_IO10 = IOMUX_PAD(0x01E8, 0x0038, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__LPSPI3_SOUT = IOMUX_PAD(0x01E8, 0x0038, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4 = IOMUX_PAD(0x01E8, 0x0038, 0x02, 0x04A0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 = IOMUX_PAD(0x01E8, 0x0038, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__TPM4_EXTCLK = IOMUX_PAD(0x01E8, 0x0038, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__LPUART7_CTS_B = IOMUX_PAD(0x01E8, 0x0038, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__LPI2C8_SDA = IOMUX_PAD(0x01E8, 0x0038, 0x06, 0x041C, 0x00, 0x00),
+ MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 = IOMUX_PAD(0x01E8, 0x0038, 0x07, 0x0394, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO11__GPIO2_IO11 = IOMUX_PAD(0x01EC, 0x003C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__LPSPI3_SCK = IOMUX_PAD(0x01EC, 0x003C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5 = IOMUX_PAD(0x01EC, 0x003C, 0x02, 0x04A4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 = IOMUX_PAD(0x01EC, 0x003C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__TPM5_EXTCLK = IOMUX_PAD(0x01EC, 0x003C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__LPUART7_RTS_B = IOMUX_PAD(0x01EC, 0x003C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__LPI2C8_SCL = IOMUX_PAD(0x01EC, 0x003C, 0x06, 0x0418, 0x00, 0x00),
+ MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 = IOMUX_PAD(0x01EC, 0x003C, 0x07, 0x0398, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO12__GPIO2_IO12 = IOMUX_PAD(0x01F0, 0x0040, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__TPM3_CH2 = IOMUX_PAD(0x01F0, 0x0040, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2 = IOMUX_PAD(0x01F0, 0x0040, 0x02, 0x04CC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 = IOMUX_PAD(0x01F0, 0x0040, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__LPSPI8_PCS0 = IOMUX_PAD(0x01F0, 0x0040, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__LPUART8_TX = IOMUX_PAD(0x01F0, 0x0040, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO12__LPI2C8_SDA = IOMUX_PAD(0x01F0, 0x0040, 0x06, 0x041C, 0x01, 0x00),
+ MX91_PAD_GPIO_IO12__SAI3_RX_SYNC = IOMUX_PAD(0x01F0, 0x0040, 0x07, 0x04DC, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO13__GPIO2_IO13 = IOMUX_PAD(0x01F4, 0x0044, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__TPM4_CH2 = IOMUX_PAD(0x01F4, 0x0044, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3 = IOMUX_PAD(0x01F4, 0x0044, 0x02, 0x04D0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 = IOMUX_PAD(0x01F4, 0x0044, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__LPSPI8_SIN = IOMUX_PAD(0x01F4, 0x0044, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__LPUART8_RX = IOMUX_PAD(0x01F4, 0x0044, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO13__LPI2C8_SCL = IOMUX_PAD(0x01F4, 0x0044, 0x06, 0x0418, 0x01, 0x00),
+ MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 = IOMUX_PAD(0x01F4, 0x0044, 0x07, 0x039C, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO14__GPIO2_IO14 = IOMUX_PAD(0x01F8, 0x0048, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__LPUART3_TX = IOMUX_PAD(0x01F8, 0x0048, 0x01, 0x0474, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6 = IOMUX_PAD(0x01F8, 0x0048, 0x02, 0x04A8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 = IOMUX_PAD(0x01F8, 0x0048, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__LPSPI8_SOUT = IOMUX_PAD(0x01F8, 0x0048, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__LPUART8_CTS_B = IOMUX_PAD(0x01F8, 0x0048, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__LPUART4_TX = IOMUX_PAD(0x01F8, 0x0048, 0x06, 0x0480, 0x00, 0x00),
+ MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 = IOMUX_PAD(0x01F8, 0x0048, 0x07, 0x03A0, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO15__GPIO2_IO15 = IOMUX_PAD(0x01FC, 0x004C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__LPUART3_RX = IOMUX_PAD(0x01FC, 0x004C, 0x01, 0x0470, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7 = IOMUX_PAD(0x01FC, 0x004C, 0x02, 0x04AC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 = IOMUX_PAD(0x01FC, 0x004C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__LPSPI8_SCK = IOMUX_PAD(0x01FC, 0x004C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__LPUART8_RTS_B = IOMUX_PAD(0x01FC, 0x004C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__LPUART4_RX = IOMUX_PAD(0x01FC, 0x004C, 0x06, 0x047C, 0x00, 0x00),
+ MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 = IOMUX_PAD(0x01FC, 0x004C, 0x07, 0x03A4, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO16__GPIO2_IO16 = IOMUX_PAD(0x0200, 0x0050, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__SAI3_TX_BCLK = IOMUX_PAD(0x0200, 0x0050, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2 = IOMUX_PAD(0x0200, 0x0050, 0x02, 0x04CC, 0x01, 0x00),
+ MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 = IOMUX_PAD(0x0200, 0x0050, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__LPUART3_CTS_B = IOMUX_PAD(0x0200, 0x0050, 0x04, 0x046C, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__LPSPI4_PCS2 = IOMUX_PAD(0x0200, 0x0050, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__LPUART4_CTS_B = IOMUX_PAD(0x0200, 0x0050, 0x06, 0x0478, 0x00, 0x00),
+ MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 = IOMUX_PAD(0x0200, 0x0050, 0x07, 0x03A8, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO17__GPIO2_IO17 = IOMUX_PAD(0x0204, 0x0054, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__SAI3_MCLK = IOMUX_PAD(0x0204, 0x0054, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8 = IOMUX_PAD(0x0204, 0x0054, 0x02, 0x04B0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 = IOMUX_PAD(0x0204, 0x0054, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__LPUART3_RTS_B = IOMUX_PAD(0x0204, 0x0054, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__LPSPI4_PCS1 = IOMUX_PAD(0x0204, 0x0054, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__LPUART4_RTS_B = IOMUX_PAD(0x0204, 0x0054, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 = IOMUX_PAD(0x0204, 0x0054, 0x07, 0x03AC, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO18__GPIO2_IO18 = IOMUX_PAD(0x0208, 0x0058, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__SAI3_RX_BCLK = IOMUX_PAD(0x0208, 0x0058, 0x01, 0x04D8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9 = IOMUX_PAD(0x0208, 0x0058, 0x02, 0x04B4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 = IOMUX_PAD(0x0208, 0x0058, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__LPSPI5_PCS0 = IOMUX_PAD(0x0208, 0x0058, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__LPSPI4_PCS0 = IOMUX_PAD(0x0208, 0x0058, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__TPM5_CH2 = IOMUX_PAD(0x0208, 0x0058, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 = IOMUX_PAD(0x0208, 0x0058, 0x07, 0x03B0, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO19__GPIO2_IO19 = IOMUX_PAD(0x020C, 0x005C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO19__SAI3_RX_SYNC = IOMUX_PAD(0x020C, 0x005C, 0x01, 0x04DC, 0x01, 0x00),
+ MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3 = IOMUX_PAD(0x020C, 0x005C, 0x02, 0x04D0, 0x01, 0x00),
+ MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 = IOMUX_PAD(0x020C, 0x005C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO19__LPSPI5_SIN = IOMUX_PAD(0x020C, 0x005C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO19__LPSPI4_SIN = IOMUX_PAD(0x020C, 0x005C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO19__TPM6_CH2 = IOMUX_PAD(0x020C, 0x005C, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 = IOMUX_PAD(0x020C, 0x005C, 0x07, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO20__GPIO2_IO20 = IOMUX_PAD(0x0210, 0x0060, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 = IOMUX_PAD(0x0210, 0x0060, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0 = IOMUX_PAD(0x0210, 0x0060, 0x02, 0x04C4, 0x01, 0x00),
+ MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 = IOMUX_PAD(0x0210, 0x0060, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__LPSPI5_SOUT = IOMUX_PAD(0x0210, 0x0060, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__LPSPI4_SOUT = IOMUX_PAD(0x0210, 0x0060, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__TPM3_CH1 = IOMUX_PAD(0x0210, 0x0060, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 = IOMUX_PAD(0x0210, 0x0060, 0x07, 0x03B4, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO21__GPIO2_IO21 = IOMUX_PAD(0x0214, 0x0064, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__SAI3_TX_DATA0 = IOMUX_PAD(0x0214, 0x0064, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__PDM_CLK = IOMUX_PAD(0x0214, 0x0064, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 = IOMUX_PAD(0x0214, 0x0064, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__LPSPI5_SCK = IOMUX_PAD(0x0214, 0x0064, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__LPSPI4_SCK = IOMUX_PAD(0x0214, 0x0064, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__TPM4_CH1 = IOMUX_PAD(0x0214, 0x0064, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO21__SAI3_RX_BCLK = IOMUX_PAD(0x0214, 0x0064, 0x07, 0x04D8, 0x01, 0x00),
+
+ MX91_PAD_GPIO_IO22__GPIO2_IO22 = IOMUX_PAD(0x0218, 0x0068, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__USDHC3_CLK = IOMUX_PAD(0x0218, 0x0068, 0x01, 0x04E8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__SPDIF_IN = IOMUX_PAD(0x0218, 0x0068, 0x02, 0x04E4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 = IOMUX_PAD(0x0218, 0x0068, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__TPM5_CH1 = IOMUX_PAD(0x0218, 0x0068, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__TPM6_EXTCLK = IOMUX_PAD(0x0218, 0x0068, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO22__LPI2C5_SDA = IOMUX_PAD(0x0218, 0x0068, 0x06, 0x0404, 0x01, 0x00),
+ MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 = IOMUX_PAD(0x0218, 0x0068, 0x07, 0x03B8, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO23__GPIO2_IO23 = IOMUX_PAD(0x021C, 0x006C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO23__USDHC3_CMD = IOMUX_PAD(0x021C, 0x006C, 0x01, 0x04EC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO23__SPDIF_OUT = IOMUX_PAD(0x021C, 0x006C, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 = IOMUX_PAD(0x021C, 0x006C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO23__TPM6_CH1 = IOMUX_PAD(0x021C, 0x006C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO23__LPI2C5_SCL = IOMUX_PAD(0x021C, 0x006C, 0x06, 0x0400, 0x01, 0x00),
+ MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 = IOMUX_PAD(0x021C, 0x006C, 0x07, 0x03BC, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO24__GPIO2_IO24 = IOMUX_PAD(0x0220, 0x0070, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__USDHC3_DATA0 = IOMUX_PAD(0x0220, 0x0070, 0x01, 0x04F0, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 = IOMUX_PAD(0x0220, 0x0070, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__TPM3_CH3 = IOMUX_PAD(0x0220, 0x0070, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__JTAG_MUX_TDO = IOMUX_PAD(0x0220, 0x0070, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__LPSPI6_PCS1 = IOMUX_PAD(0x0220, 0x0070, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 = IOMUX_PAD(0x0220, 0x0070, 0x07, 0x03C0, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO25__GPIO2_IO25 = IOMUX_PAD(0x0224, 0x0074, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__USDHC3_DATA1 = IOMUX_PAD(0x0224, 0x0074, 0x01, 0x04F4, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__CAN2_TX = IOMUX_PAD(0x0224, 0x0074, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 = IOMUX_PAD(0x0224, 0x0074, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__TPM4_CH3 = IOMUX_PAD(0x0224, 0x0074, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__JTAG_MUX_TCK = IOMUX_PAD(0x0224, 0x0074, 0x05, 0x03D4, 0x01, 0x00),
+ MX91_PAD_GPIO_IO25__LPSPI7_PCS1 = IOMUX_PAD(0x0224, 0x0074, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 = IOMUX_PAD(0x0224, 0x0074, 0x07, 0x03C4, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO26__GPIO2_IO26 = IOMUX_PAD(0x0228, 0x0078, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO26__USDHC3_DATA2 = IOMUX_PAD(0x0228, 0x0078, 0x01, 0x04F8, 0x00, 0x00),
+ MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1 = IOMUX_PAD(0x0228, 0x0078, 0x02, 0x04C8, 0x01, 0x00),
+ MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 = IOMUX_PAD(0x0228, 0x0078, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO26__TPM5_CH3 = IOMUX_PAD(0x0228, 0x0078, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO26__JTAG_MUX_TDI = IOMUX_PAD(0x0228, 0x0078, 0x05, 0x03D8, 0x01, 0x00),
+ MX91_PAD_GPIO_IO26__LPSPI8_PCS1 = IOMUX_PAD(0x0228, 0x0078, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO26__SAI3_TX_SYNC = IOMUX_PAD(0x0228, 0x0078, 0x07, 0x04E0, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO27__GPIO2_IO27 = IOMUX_PAD(0x022C, 0x007C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO27__USDHC3_DATA3 = IOMUX_PAD(0x022C, 0x007C, 0x01, 0x04FC, 0x00, 0x00),
+ MX91_PAD_GPIO_IO27__CAN2_RX = IOMUX_PAD(0x022C, 0x007C, 0x02, 0x0364, 0x01, 0x00),
+ MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 = IOMUX_PAD(0x022C, 0x007C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO27__TPM6_CH3 = IOMUX_PAD(0x022C, 0x007C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO27__JTAG_MUX_TMS = IOMUX_PAD(0x022C, 0x007C, 0x05, 0x03DC, 0x01, 0x00),
+ MX91_PAD_GPIO_IO27__LPSPI5_PCS1 = IOMUX_PAD(0x022C, 0x007C, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 = IOMUX_PAD(0x022C, 0x007C, 0x07, 0x03C8, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO28__GPIO2_IO28 = IOMUX_PAD(0x0230, 0x0080, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO28__LPI2C3_SDA = IOMUX_PAD(0x0230, 0x0080, 0x01, 0x03F4, 0x01, 0x00),
+ MX91_PAD_GPIO_IO28__CAN1_TX = IOMUX_PAD(0x0230, 0x0080, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 = IOMUX_PAD(0x0230, 0x0080, 0x07, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_GPIO_IO29__GPIO2_IO29 = IOMUX_PAD(0x0234, 0x0084, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_GPIO_IO29__LPI2C3_SCL = IOMUX_PAD(0x0234, 0x0084, 0x01, 0x03F0, 0x01, 0x00),
+ MX91_PAD_GPIO_IO29__CAN1_RX = IOMUX_PAD(0x0234, 0x0084, 0x02, 0x0360, 0x00, 0x00),
+ MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 = IOMUX_PAD(0x0234, 0x0084, 0x07, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 = IOMUX_PAD(0x0238, 0x0088, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 = IOMUX_PAD(0x0238, 0x0088, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO1__GPIO3_IO26 = IOMUX_PAD(0x0238, 0x0088, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_CCM_CLKO2__GPIO3_IO27 = IOMUX_PAD(0x023C, 0x008C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 = IOMUX_PAD(0x023C, 0x008C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 = IOMUX_PAD(0x023C, 0x008C, 0x04, 0x03C8, 0x01, 0x00),
+
+ MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 = IOMUX_PAD(0x0240, 0x0090, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 = IOMUX_PAD(0x0240, 0x0090, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO3__GPIO4_IO28 = IOMUX_PAD(0x0240, 0x0090, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 = IOMUX_PAD(0x0244, 0x0094, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 = IOMUX_PAD(0x0244, 0x0094, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_CCM_CLKO4__GPIO4_IO29 = IOMUX_PAD(0x0244, 0x0094, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_MDC__ENET1_MDC = IOMUX_PAD(0x0248, 0x0098, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__LPUART3_DCB_B = IOMUX_PAD(0x0248, 0x0098, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__I3C2_SCL = IOMUX_PAD(0x0248, 0x0098, 0x02, 0x03CC, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 = IOMUX_PAD(0x0248, 0x0098, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0 = IOMUX_PAD(0x0248, 0x0098, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__GPIO4_IO0 = IOMUX_PAD(0x0248, 0x0098, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDC__LPI2C1_SCL = IOMUX_PAD(0x0248, 0x0098, 0x06, 0x03E0, 0x00, 0x00),
+
+ MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO = IOMUX_PAD(0x024C, 0x009C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__LPUART3_RIN_B = IOMUX_PAD(0x024C, 0x009C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__I3C2_SDA = IOMUX_PAD(0x024C, 0x009C, 0x02, 0x03D0, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 = IOMUX_PAD(0x024C, 0x009C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1 = IOMUX_PAD(0x024C, 0x009C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__GPIO4_IO1 = IOMUX_PAD(0x024C, 0x009C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_MDIO__LPI2C1_SDA = IOMUX_PAD(0x024C, 0x009C, 0x06, 0x03E4, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 = IOMUX_PAD(0x0250, 0x00A0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD3__CAN2_TX = IOMUX_PAD(0x0250, 0x00A0, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 = IOMUX_PAD(0x0250, 0x00A0, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2 = IOMUX_PAD(0x0250, 0x00A0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD3__GPIO4_IO3 = IOMUX_PAD(0x0250, 0x00A0, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD3__LPI2C2_SCL = IOMUX_PAD(0x0250, 0x00A0, 0x06, 0x03E8, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 = IOMUX_PAD(0x0254, 0x00A4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK = IOMUX_PAD(0x0254, 0x00A4, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD2__CAN2_RX = IOMUX_PAD(0x0254, 0x00A4, 0x02, 0x0364, 0x02, 0x00),
+ MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 = IOMUX_PAD(0x0254, 0x00A4, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3 = IOMUX_PAD(0x0254, 0x00A4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD2__GPIO4_IO3 = IOMUX_PAD(0x0254, 0x00A4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD2__LPI2C2_SDA = IOMUX_PAD(0x0254, 0x00A4, 0x06, 0x03EC, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 = IOMUX_PAD(0x0258, 0x00A8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__LPUART3_RTS_B = IOMUX_PAD(0x0258, 0x00A8, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__I3C2_PUR = IOMUX_PAD(0x0258, 0x00A8, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 = IOMUX_PAD(0x0258, 0x00A8, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4 = IOMUX_PAD(0x0258, 0x00A8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__GPIO4_IO4 = IOMUX_PAD(0x0258, 0x00A8, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD1__I3C2_PUR_B = IOMUX_PAD(0x0258, 0x00A8, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 = IOMUX_PAD(0x025C, 0x00AC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD0__LPUART3_TX = IOMUX_PAD(0x025C, 0x00AC, 0x01, 0x0474, 0x01, 0x00),
+ MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5 = IOMUX_PAD(0x025C, 0x00AC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TD0__GPIO4_IO5 = IOMUX_PAD(0x025C, 0x00AC, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL = IOMUX_PAD(0x0260, 0x00B0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B = IOMUX_PAD(0x0260, 0x00B0, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6 = IOMUX_PAD(0x0260, 0x00B0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 = IOMUX_PAD(0x0260, 0x00B0, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK = IOMUX_PAD(0x0260, 0x00B0, 0x02, 0x043C, 0x00, 0x00),
+
+ MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK = IOMUX_PAD(0x0264, 0x00B4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER = IOMUX_PAD(0x0264, 0x00B4, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7 = IOMUX_PAD(0x0264, 0x00B4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TXC__GPIO4_IO7 = IOMUX_PAD(0x0264, 0x00B4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_TXC__LPSPI2_SIN = IOMUX_PAD(0x0264, 0x00B4, 0x02, 0x0440, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL = IOMUX_PAD(0x0268, 0x00B8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B = IOMUX_PAD(0x0268, 0x00B8, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 = IOMUX_PAD(0x0268, 0x00B8, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8 = IOMUX_PAD(0x0268, 0x00B8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 = IOMUX_PAD(0x0268, 0x00B8, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0 = IOMUX_PAD(0x0268, 0x00B8, 0x02, 0x0434, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC = IOMUX_PAD(0x026C, 0x00BC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER = IOMUX_PAD(0x026C, 0x00BC, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9 = IOMUX_PAD(0x026C, 0x00BC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RXC__GPIO4_IO9 = IOMUX_PAD(0x026C, 0x00BC, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RXC__LPSPI2_SOUT = IOMUX_PAD(0x026C, 0x00BC, 0x02, 0x0444, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 = IOMUX_PAD(0x0270, 0x00C0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD0__LPUART3_RX = IOMUX_PAD(0x0270, 0x00C0, 0x01, 0x0470, 0x01, 0x00),
+ MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 = IOMUX_PAD(0x0270, 0x00C0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD0__GPIO4_IO10 = IOMUX_PAD(0x0270, 0x00C0, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 = IOMUX_PAD(0x0274, 0x00C4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD1__LPUART3_CTS_B = IOMUX_PAD(0x0274, 0x00C4, 0x01, 0x046C, 0x01, 0x00),
+ MX91_PAD_ENET1_RD1__LPTMR2_ALT1 = IOMUX_PAD(0x0274, 0x00C4, 0x03, 0x0448, 0x00, 0x00),
+ MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 = IOMUX_PAD(0x0274, 0x00C4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD1__GPIO4_IO11 = IOMUX_PAD(0x0274, 0x00C4, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 = IOMUX_PAD(0x0278, 0x00C8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD2__LPTMR2_ALT2 = IOMUX_PAD(0x0278, 0x00C8, 0x03, 0x044C, 0x00, 0x00),
+ MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 = IOMUX_PAD(0x0278, 0x00C8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD2__GPIO4_IO12 = IOMUX_PAD(0x0278, 0x00C8, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 = IOMUX_PAD(0x027C, 0x00CC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER = IOMUX_PAD(0x027C, 0x00CC, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD3__LPTMR2_ALT3 = IOMUX_PAD(0x027C, 0x00CC, 0x03, 0x0450, 0x00, 0x00),
+ MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 = IOMUX_PAD(0x027C, 0x00CC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET1_RD3__GPIO4_IO13 = IOMUX_PAD(0x027C, 0x00CC, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET2_MDC__ENET2_MDC = IOMUX_PAD(0x0280, 0x00D0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDC__LPUART4_DCB_B = IOMUX_PAD(0x0280, 0x00D0, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDC__SAI2_RX_SYNC = IOMUX_PAD(0x0280, 0x00D0, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 = IOMUX_PAD(0x0280, 0x00D0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDC__GPIO4_IO14 = IOMUX_PAD(0x0280, 0x00D0, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK = IOMUX_PAD(0x0280, 0x00D0, 0x06, 0x04BC, 0x01, 0x00),
+
+ MX91_PAD_ENET2_MDIO__ENET2_MDIO = IOMUX_PAD(0x0284, 0x00D4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDIO__LPUART4_RIN_B = IOMUX_PAD(0x0284, 0x00D4, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK = IOMUX_PAD(0x0284, 0x00D4, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 = IOMUX_PAD(0x0284, 0x00D4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDIO__GPIO4_IO15 = IOMUX_PAD(0x0284, 0x00D4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0 = IOMUX_PAD(0x0284, 0x00D4, 0x06, 0x0490, 0x01, 0x00),
+
+ MX91_PAD_ENET2_TD3__SAI2_RX_DATA0 = IOMUX_PAD(0x0288, 0x00D8, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 = IOMUX_PAD(0x0288, 0x00D8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD3__GPIO4_IO16 = IOMUX_PAD(0x0288, 0x00D8, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC = IOMUX_PAD(0x0288, 0x00D8, 0x06, 0x04C0, 0x01, 0x00),
+ MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 = IOMUX_PAD(0x0288, 0x00D8, 0x00, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 = IOMUX_PAD(0x028C, 0x00DC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 = IOMUX_PAD(0x028C, 0x00DC, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 = IOMUX_PAD(0x028C, 0x00DC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD2__GPIO4_IO17 = IOMUX_PAD(0x028C, 0x00DC, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC = IOMUX_PAD(0x028C, 0x00DC, 0x06, 0x04B8, 0x01, 0x00),
+
+ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 = IOMUX_PAD(0x0290, 0x00E0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD1__LPUART4_RTS_B = IOMUX_PAD(0x0290, 0x00E0, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 = IOMUX_PAD(0x0290, 0x00E0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD1__GPIO4_IO18 = IOMUX_PAD(0x0290, 0x00E0, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1 = IOMUX_PAD(0x0290, 0x00E0, 0x06, 0x0494, 0x01, 0x00),
+
+ MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 = IOMUX_PAD(0x0294, 0x00E4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD0__LPUART4_TX = IOMUX_PAD(0x0294, 0x00E4, 0x01, 0x0480, 0x01, 0x00),
+ MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 = IOMUX_PAD(0x0294, 0x00E4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD0__GPIO4_IO19 = IOMUX_PAD(0x0294, 0x00E4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2 = IOMUX_PAD(0x0294, 0x00E4, 0x06, 0x0498, 0x01, 0x00),
+
+ MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL = IOMUX_PAD(0x0298, 0x00E8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B = IOMUX_PAD(0x0298, 0x00E8, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC = IOMUX_PAD(0x0298, 0x00E8, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 = IOMUX_PAD(0x0298, 0x00E8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 = IOMUX_PAD(0x0298, 0x00E8, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3 = IOMUX_PAD(0x0298, 0x00E8, 0x06, 0x049C, 0x01, 0x00),
+
+ MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC = IOMUX_PAD(0x029C, 0x00EC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TXC__ENET2_TX_ER = IOMUX_PAD(0x029C, 0x00EC, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TXC__SAI2_TX_BCLK = IOMUX_PAD(0x029C, 0x00EC, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 = IOMUX_PAD(0x029C, 0x00EC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TXC__GPIO4_IO21 = IOMUX_PAD(0x029C, 0x00EC, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4 = IOMUX_PAD(0x029C, 0x00EC, 0x06, 0x04A0, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL = IOMUX_PAD(0x02A0, 0x00F0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B = IOMUX_PAD(0x02A0, 0x00F0, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0 = IOMUX_PAD(0x02A0, 0x00F0, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 = IOMUX_PAD(0x02A0, 0x00F0, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 = IOMUX_PAD(0x02A0, 0x00F0, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5 = IOMUX_PAD(0x02A0, 0x00F0, 0x06, 0x04A4, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC = IOMUX_PAD(0x02A4, 0x00F4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RXC__ENET2_RX_ER = IOMUX_PAD(0x02A4, 0x00F4, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 = IOMUX_PAD(0x02A4, 0x00F4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RXC__GPIO4_IO23 = IOMUX_PAD(0x02A4, 0x00F4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6 = IOMUX_PAD(0x02A4, 0x00F4, 0x06, 0x04A8, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 = IOMUX_PAD(0x02A8, 0x00F8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD0__LPUART4_RX = IOMUX_PAD(0x02A8, 0x00F8, 0x01, 0x047C, 0x01, 0x00),
+ MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 = IOMUX_PAD(0x02A8, 0x00F8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD0__GPIO4_IO24 = IOMUX_PAD(0x02A8, 0x00F8, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7 = IOMUX_PAD(0x02A8, 0x00F8, 0x06, 0x04AC, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 = IOMUX_PAD(0x02AC, 0x00FC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD1__SPDIF_IN = IOMUX_PAD(0x02AC, 0x00FC, 0x01, 0x04E4, 0x01, 0x00),
+ MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 = IOMUX_PAD(0x02AC, 0x00FC, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD1__GPIO4_IO25 = IOMUX_PAD(0x02AC, 0x00FC, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8 = IOMUX_PAD(0x02AC, 0x00FC, 0x06, 0x04B0, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 = IOMUX_PAD(0x02B0, 0x0100, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD2__LPUART4_CTS_B = IOMUX_PAD(0x02B0, 0x0100, 0x01, 0x0478, 0x01, 0x00),
+ MX91_PAD_ENET2_RD2__SAI2_MCLK = IOMUX_PAD(0x02B0, 0x0100, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD2__MQS2_RIGHT = IOMUX_PAD(0x02B0, 0x0100, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 = IOMUX_PAD(0x02B0, 0x0100, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD2__GPIO4_IO26 = IOMUX_PAD(0x02B0, 0x0100, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9 = IOMUX_PAD(0x02B0, 0x0100, 0x06, 0x04B4, 0x01, 0x00),
+
+ MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 = IOMUX_PAD(0x02B4, 0x0104, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD3__SPDIF_OUT = IOMUX_PAD(0x02B4, 0x0104, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD3__SPDIF_IN = IOMUX_PAD(0x02B4, 0x0104, 0x02, 0x04E4, 0x02, 0x00),
+ MX91_PAD_ENET2_RD3__MQS2_LEFT = IOMUX_PAD(0x02B4, 0x0104, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 = IOMUX_PAD(0x02B4, 0x0104, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_ENET2_RD3__GPIO4_IO27 = IOMUX_PAD(0x02B4, 0x0104, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8 = IOMUX_PAD(0x02B8, 0x0108, 0x04, 0x038C, 0x01, 0x00),
+ MX91_PAD_SD1_CLK__GPIO3_IO8 = IOMUX_PAD(0x02B8, 0x0108, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x02B8, 0x0108, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_CLK__LPSPI2_SCK = IOMUX_PAD(0x02B8, 0x0108, 0x03, 0x043C, 0x01, 0x00),
+
+ MX91_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x02BC, 0x010C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9 = IOMUX_PAD(0x02BC, 0x010C, 0x04, 0x0390, 0x01, 0x00),
+ MX91_PAD_SD1_CMD__GPIO3_IO9 = IOMUX_PAD(0x02BC, 0x010C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_CMD__LPSPI2_SIN = IOMUX_PAD(0x02BC, 0x010C, 0x03, 0x0440, 0x01, 0x00),
+
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 = IOMUX_PAD(0x02C0, 0x0110, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 = IOMUX_PAD(0x02C0, 0x0110, 0x04, 0x0394, 0x01, 0x00),
+ MX91_PAD_SD1_DATA0__GPIO3_IO10 = IOMUX_PAD(0x02C0, 0x0110, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA0__LPSPI2_PCS0 = IOMUX_PAD(0x02C0, 0x0110, 0x03, 0x0434, 0x01, 0x00),
+
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 = IOMUX_PAD(0x02C4, 0x0114, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 = IOMUX_PAD(0x02C4, 0x0114, 0x04, 0x0398, 0x01, 0x00),
+ MX91_PAD_SD1_DATA1__GPIO3_IO11 = IOMUX_PAD(0x02C4, 0x0114, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT = IOMUX_PAD(0x02C4, 0x0114, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA1__LPSPI2_SOUT = IOMUX_PAD(0x02C4, 0x0114, 0x03, 0x0444, 0x01, 0x00),
+
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 = IOMUX_PAD(0x02C8, 0x0118, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 = IOMUX_PAD(0x02C8, 0x0118, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA2__GPIO3_IO12 = IOMUX_PAD(0x02C8, 0x0118, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY = IOMUX_PAD(0x02C8, 0x0118, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA2__LPSPI2_PCS1 = IOMUX_PAD(0x02C8, 0x0118, 0x03, 0x0438, 0x00, 0x00),
+
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 = IOMUX_PAD(0x02CC, 0x011C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B = IOMUX_PAD(0x02CC, 0x011C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 = IOMUX_PAD(0x02CC, 0x011C, 0x04, 0x039C, 0x01, 0x00),
+ MX91_PAD_SD1_DATA3__GPIO3_IO13 = IOMUX_PAD(0x02CC, 0x011C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA3__LPSPI1_PCS1 = IOMUX_PAD(0x02CC, 0x011C, 0x03, 0x0424, 0x00, 0x00),
+
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 = IOMUX_PAD(0x02D0, 0x0120, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4 = IOMUX_PAD(0x02D0, 0x0120, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 = IOMUX_PAD(0x02D0, 0x0120, 0x04, 0x03A0, 0x01, 0x00),
+ MX91_PAD_SD1_DATA4__GPIO3_IO14 = IOMUX_PAD(0x02D0, 0x0120, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA4__LPSPI1_PCS0 = IOMUX_PAD(0x02D0, 0x0120, 0x03, 0x0420, 0x00, 0x00),
+
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 = IOMUX_PAD(0x02D4, 0x0124, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5 = IOMUX_PAD(0x02D4, 0x0124, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA5__USDHC1_RESET_B = IOMUX_PAD(0x02D4, 0x0124, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 = IOMUX_PAD(0x02D4, 0x0124, 0x04, 0x03A4, 0x01, 0x00),
+ MX91_PAD_SD1_DATA5__GPIO3_IO15 = IOMUX_PAD(0x02D4, 0x0124, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA5__LPSPI1_SIN = IOMUX_PAD(0x02D4, 0x0124, 0x03, 0x042C, 0x00, 0x00),
+
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 = IOMUX_PAD(0x02D8, 0x0128, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6 = IOMUX_PAD(0x02D8, 0x0128, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA6__USDHC1_CD_B = IOMUX_PAD(0x02D8, 0x0128, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 = IOMUX_PAD(0x02D8, 0x0128, 0x04, 0x03A8, 0x01, 0x00),
+ MX91_PAD_SD1_DATA6__GPIO3_IO16 = IOMUX_PAD(0x02D8, 0x0128, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA6__LPSPI1_SCK = IOMUX_PAD(0x02D8, 0x0128, 0x03, 0x0428, 0x00, 0x00),
+
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 = IOMUX_PAD(0x02DC, 0x012C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7 = IOMUX_PAD(0x02DC, 0x012C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA7__USDHC1_WP = IOMUX_PAD(0x02DC, 0x012C, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 = IOMUX_PAD(0x02DC, 0x012C, 0x04, 0x03AC, 0x01, 0x00),
+ MX91_PAD_SD1_DATA7__GPIO3_IO17 = IOMUX_PAD(0x02DC, 0x012C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_DATA7__LPSPI1_SOUT = IOMUX_PAD(0x02DC, 0x012C, 0x03, 0x0430, 0x00, 0x00),
+
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE = IOMUX_PAD(0x02E0, 0x0130, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS = IOMUX_PAD(0x02E0, 0x0130, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 = IOMUX_PAD(0x02E0, 0x0130, 0x04, 0x03B0, 0x01, 0x00),
+ MX91_PAD_SD1_STROBE__GPIO3_IO18 = IOMUX_PAD(0x02E0, 0x0130, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT = IOMUX_PAD(0x02E4, 0x0134, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_VSELECT__USDHC2_WP = IOMUX_PAD(0x02E4, 0x0134, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_VSELECT__LPTMR2_ALT3 = IOMUX_PAD(0x02E4, 0x0134, 0x02, 0x0450, 0x01, 0x00),
+ MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 = IOMUX_PAD(0x02E4, 0x0134, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_VSELECT__GPIO3_IO19 = IOMUX_PAD(0x02E4, 0x0134, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 = IOMUX_PAD(0x02E4, 0x0134, 0x06, 0x0368, 0x00, 0x00),
+
+ MX91_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x02E8, 0x0138, 0x00, 0x04E8, 0x01, 0x00),
+ MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK = IOMUX_PAD(0x02E8, 0x0138, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_CLK__LPUART1_CTS_B = IOMUX_PAD(0x02E8, 0x0138, 0x02, 0x0454, 0x00, 0x00),
+ MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20 = IOMUX_PAD(0x02E8, 0x0138, 0x04, 0x03B4, 0x01, 0x00),
+ MX91_PAD_SD3_CLK__GPIO3_IO20 = IOMUX_PAD(0x02E8, 0x0138, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x02EC, 0x013C, 0x00, 0x04EC, 0x01, 0x00),
+ MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B = IOMUX_PAD(0x02EC, 0x013C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_CMD__LPUART1_RTS_B = IOMUX_PAD(0x02EC, 0x013C, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21 = IOMUX_PAD(0x02EC, 0x013C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_CMD__GPIO3_IO21 = IOMUX_PAD(0x02EC, 0x013C, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 = IOMUX_PAD(0x02F0, 0x0140, 0x00, 0x04F0, 0x01, 0x00),
+ MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 = IOMUX_PAD(0x02F0, 0x0140, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_DATA0__LPUART2_CTS_B = IOMUX_PAD(0x02F0, 0x0140, 0x02, 0x0460, 0x00, 0x00),
+ MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 = IOMUX_PAD(0x02F0, 0x0140, 0x04, 0x03B8, 0x01, 0x00),
+ MX91_PAD_SD3_DATA0__GPIO3_IO22 = IOMUX_PAD(0x02F0, 0x0140, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 = IOMUX_PAD(0x02F4, 0x0144, 0x00, 0x04F4, 0x01, 0x00),
+ MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 = IOMUX_PAD(0x02F4, 0x0144, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_DATA1__LPUART2_RTS_B = IOMUX_PAD(0x02F4, 0x0144, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 = IOMUX_PAD(0x02F4, 0x0144, 0x04, 0x03BC, 0x01, 0x00),
+ MX91_PAD_SD3_DATA1__GPIO3_IO23 = IOMUX_PAD(0x02F4, 0x0144, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 = IOMUX_PAD(0x02F8, 0x0148, 0x00, 0x04F8, 0x01, 0x00),
+ MX91_PAD_SD3_DATA2__LPI2C4_SDA = IOMUX_PAD(0x02F8, 0x0148, 0x02, 0x03FC, 0x01, 0x00),
+ MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 = IOMUX_PAD(0x02F8, 0x0148, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 = IOMUX_PAD(0x02F8, 0x0148, 0x04, 0x03C0, 0x01, 0x00),
+ MX91_PAD_SD3_DATA2__GPIO3_IO24 = IOMUX_PAD(0x02F8, 0x0148, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 = IOMUX_PAD(0x02FC, 0x014C, 0x00, 0x04FC, 0x01, 0x00),
+ MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 = IOMUX_PAD(0x02FC, 0x014C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD3_DATA3__LPI2C4_SCL = IOMUX_PAD(0x02FC, 0x014C, 0x02, 0x03F8, 0x01, 0x00),
+ MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 = IOMUX_PAD(0x02FC, 0x014C, 0x04, 0x03C4, 0x01, 0x00),
+ MX91_PAD_SD3_DATA3__GPIO3_IO25 = IOMUX_PAD(0x02FC, 0x014C, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_CD_B__USDHC2_CD_B = IOMUX_PAD(0x0300, 0x0150, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN = IOMUX_PAD(0x0300, 0x0150, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CD_B__I3C2_SCL = IOMUX_PAD(0x0300, 0x0150, 0x02, 0x03CC, 0x01, 0x00),
+ MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0 = IOMUX_PAD(0x0300, 0x0150, 0x04, 0x036C, 0x01, 0x00),
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 = IOMUX_PAD(0x0300, 0x0150, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CD_B__LPI2C1_SCL = IOMUX_PAD(0x0300, 0x0150, 0x03, 0x03E0, 0x01, 0x00),
+
+ MX91_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x0304, 0x0154, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT = IOMUX_PAD(0x0304, 0x0154, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CLK__I2C1_SDA = IOMUX_PAD(0x0304, 0x0154, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CLK__I3C2_SDA = IOMUX_PAD(0x0304, 0x0154, 0x02, 0x03D0, 0x01, 0x00),
+ MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1 = IOMUX_PAD(0x0304, 0x0154, 0x04, 0x0370, 0x01, 0x00),
+ MX91_PAD_SD2_CLK__GPIO3_IO1 = IOMUX_PAD(0x0304, 0x0154, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 = IOMUX_PAD(0x0304, 0x0154, 0x06, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CLK__LPI2C1_SDA = IOMUX_PAD(0x0304, 0x0154, 0x03, 0x03E4, 0x01, 0x00),
+
+ MX91_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0308, 0x0158, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN = IOMUX_PAD(0x0308, 0x0158, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CMD__I3C2_PUR = IOMUX_PAD(0x0308, 0x0158, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CMD__I3C2_PUR_B = IOMUX_PAD(0x0308, 0x0158, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2 = IOMUX_PAD(0x0308, 0x0158, 0x04, 0x0374, 0x01, 0x00),
+ MX91_PAD_SD2_CMD__GPIO3_IO2 = IOMUX_PAD(0x0308, 0x0158, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 = IOMUX_PAD(0x0308, 0x0158, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 = IOMUX_PAD(0x030C, 0x015C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT = IOMUX_PAD(0x030C, 0x015C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA0__CAN2_TX = IOMUX_PAD(0x030C, 0x015C, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3 = IOMUX_PAD(0x030C, 0x015C, 0x04, 0x0378, 0x01, 0x00),
+ MX91_PAD_SD2_DATA0__GPIO3_IO3 = IOMUX_PAD(0x030C, 0x015C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA0__LPUART1_TX = IOMUX_PAD(0x030C, 0x015C, 0x03, 0x045C, 0x00, 0x00),
+ MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 = IOMUX_PAD(0x030C, 0x015C, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 = IOMUX_PAD(0x0310, 0x0160, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN = IOMUX_PAD(0x0310, 0x0160, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA1__CAN2_RX = IOMUX_PAD(0x0310, 0x0160, 0x02, 0x0364, 0x03, 0x00),
+ MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4 = IOMUX_PAD(0x0310, 0x0160, 0x04, 0x037C, 0x01, 0x00),
+ MX91_PAD_SD2_DATA1__GPIO3_IO4 = IOMUX_PAD(0x0310, 0x0160, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA1__LPUART1_RX = IOMUX_PAD(0x0310, 0x0160, 0x03, 0x0458, 0x00, 0x00),
+ MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT = IOMUX_PAD(0x0310, 0x0160, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 = IOMUX_PAD(0x0314, 0x0164, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT = IOMUX_PAD(0x0314, 0x0164, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA2__MQS2_RIGHT = IOMUX_PAD(0x0314, 0x0164, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5 = IOMUX_PAD(0x0314, 0x0164, 0x04, 0x0380, 0x01, 0x00),
+ MX91_PAD_SD2_DATA2__GPIO3_IO5 = IOMUX_PAD(0x0314, 0x0164, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA2__LPUART2_TX = IOMUX_PAD(0x0314, 0x0164, 0x03, 0x0468, 0x00, 0x00),
+ MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP = IOMUX_PAD(0x0314, 0x0164, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 = IOMUX_PAD(0x0318, 0x0168, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA3__LPTMR2_ALT1 = IOMUX_PAD(0x0318, 0x0168, 0x01, 0x0448, 0x01, 0x00),
+ MX91_PAD_SD2_DATA3__MQS2_LEFT = IOMUX_PAD(0x0318, 0x0168, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6 = IOMUX_PAD(0x0318, 0x0168, 0x04, 0x0384, 0x01, 0x00),
+ MX91_PAD_SD2_DATA3__GPIO3_IO6 = IOMUX_PAD(0x0318, 0x0168, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_DATA3__LPUART2_RX = IOMUX_PAD(0x0318, 0x0168, 0x03, 0x0464, 0x00, 0x00),
+ MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET = IOMUX_PAD(0x0318, 0x0168, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SD2_RESET_B__USDHC2_RESET_B = IOMUX_PAD(0x031C, 0x016C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_RESET_B__LPTMR2_ALT2 = IOMUX_PAD(0x031C, 0x016C, 0x01, 0x044C, 0x01, 0x00),
+ MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7 = IOMUX_PAD(0x031C, 0x016C, 0x04, 0x0388, 0x01, 0x00),
+ MX91_PAD_SD2_RESET_B__GPIO3_IO7 = IOMUX_PAD(0x031C, 0x016C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET = IOMUX_PAD(0x031C, 0x016C, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_I2C1_SCL__LPI2C1_SCL = IOMUX_PAD(0x0320, 0x0170, 0x00, 0x03E0, 0x02, 0x00),
+ MX91_PAD_I2C1_SCL__I3C1_SCL = IOMUX_PAD(0x0320, 0x0170, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SCL__LPUART1_DCB_B = IOMUX_PAD(0x0320, 0x0170, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SCL__TPM2_CH0 = IOMUX_PAD(0x0320, 0x0170, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SCL__GPIO1_IO0 = IOMUX_PAD(0x0320, 0x0170, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_I2C1_SDA__LPI2C1_SDA = IOMUX_PAD(0x0324, 0x0174, 0x00, 0x03E4, 0x02, 0x00),
+ MX91_PAD_I2C1_SDA__I3C1_SDA = IOMUX_PAD(0x0324, 0x0174, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SDA__LPUART1_RIN_B = IOMUX_PAD(0x0324, 0x0174, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SDA__TPM2_CH1 = IOMUX_PAD(0x0324, 0x0174, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C1_SDA__GPIO1_IO1 = IOMUX_PAD(0x0324, 0x0174, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_I2C2_SCL__LPI2C2_SCL = IOMUX_PAD(0x0328, 0x0178, 0x00, 0x03E8, 0x01, 0x00),
+ MX91_PAD_I2C2_SCL__I3C1_PUR = IOMUX_PAD(0x0328, 0x0178, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SCL__LPUART2_DCB_B = IOMUX_PAD(0x0328, 0x0178, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SCL__TPM2_CH2 = IOMUX_PAD(0x0328, 0x0178, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SCL__SAI1_RX_SYNC = IOMUX_PAD(0x0328, 0x0178, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SCL__GPIO1_IO3 = IOMUX_PAD(0x0328, 0x0178, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SCL__I3C1_PUR_B = IOMUX_PAD(0x0328, 0x0178, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_I2C2_SDA__LPI2C2_SDA = IOMUX_PAD(0x032C, 0x017C, 0x00, 0x03EC, 0x01, 0x00),
+ MX91_PAD_I2C2_SDA__LPUART2_RIN_B = IOMUX_PAD(0x032C, 0x017C, 0x02, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SDA__TPM2_CH3 = IOMUX_PAD(0x032C, 0x017C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SDA__SAI1_RX_BCLK = IOMUX_PAD(0x032C, 0x017C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_I2C2_SDA__GPIO1_IO3 = IOMUX_PAD(0x032C, 0x017C, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_UART1_RXD__LPUART1_RX = IOMUX_PAD(0x0330, 0x0180, 0x00, 0x0458, 0x01, 0x00),
+ MX91_PAD_UART1_RXD__ELE_UART_RX = IOMUX_PAD(0x0330, 0x0180, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART1_RXD__LPSPI2_SIN = IOMUX_PAD(0x0330, 0x0180, 0x02, 0x0440, 0x02, 0x00),
+ MX91_PAD_UART1_RXD__TPM1_CH0 = IOMUX_PAD(0x0330, 0x0180, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART1_RXD__GPIO1_IO4 = IOMUX_PAD(0x0330, 0x0180, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_UART1_TXD__LPUART1_TX = IOMUX_PAD(0x0334, 0x0184, 0x00, 0x045C, 0x01, 0x00),
+ MX91_PAD_UART1_TXD__ELE_UART_TX = IOMUX_PAD(0x0334, 0x0184, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART1_TXD__LPSPI2_PCS0 = IOMUX_PAD(0x0334, 0x0184, 0x02, 0x0434, 0x02, 0x00),
+ MX91_PAD_UART1_TXD__TPM1_CH1 = IOMUX_PAD(0x0334, 0x0184, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART1_TXD__GPIO1_IO5 = IOMUX_PAD(0x0334, 0x0184, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_UART2_RXD__LPUART2_RX = IOMUX_PAD(0x0338, 0x0188, 0x00, 0x0464, 0x01, 0x00),
+ MX91_PAD_UART2_RXD__LPUART1_CTS_B = IOMUX_PAD(0x0338, 0x0188, 0x01, 0x0454, 0x01, 0x00),
+ MX91_PAD_UART2_RXD__LPSPI2_SOUT = IOMUX_PAD(0x0338, 0x0188, 0x02, 0x0444, 0x02, 0x00),
+ MX91_PAD_UART2_RXD__TPM1_CH2 = IOMUX_PAD(0x0338, 0x0188, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART2_RXD__SAI1_MCLK = IOMUX_PAD(0x0338, 0x0188, 0x04, 0x04D4, 0x00, 0x00),
+ MX91_PAD_UART2_RXD__GPIO1_IO6 = IOMUX_PAD(0x0338, 0x0188, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_UART2_TXD__LPUART2_TX = IOMUX_PAD(0x033C, 0x018C, 0x00, 0x0468, 0x01, 0x00),
+ MX91_PAD_UART2_TXD__LPUART1_RTS_B = IOMUX_PAD(0x033C, 0x018C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART2_TXD__LPSPI2_SCK = IOMUX_PAD(0x033C, 0x018C, 0x02, 0x043C, 0x02, 0x00),
+ MX91_PAD_UART2_TXD__TPM1_CH3 = IOMUX_PAD(0x033C, 0x018C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART2_TXD__GPIO1_IO7 = IOMUX_PAD(0x033C, 0x018C, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_UART2_TXD__SAI3_TX_SYNC = IOMUX_PAD(0x033C, 0x018C, 0x07, 0x04E0, 0x02, 0x00),
+
+ MX91_PAD_PDM_CLK__PDM_CLK = IOMUX_PAD(0x0340, 0x0190, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_CLK__MQS1_LEFT = IOMUX_PAD(0x0340, 0x0190, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_CLK__LPTMR1_ALT1 = IOMUX_PAD(0x0340, 0x0190, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_CLK__GPIO1_IO8 = IOMUX_PAD(0x0340, 0x0190, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_CLK__CAN1_TX = IOMUX_PAD(0x0340, 0x0190, 0x06, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 = IOMUX_PAD(0x0344, 0x0194, 0x00, 0x04C4, 0x02, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT = IOMUX_PAD(0x0344, 0x0194, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 = IOMUX_PAD(0x0344, 0x0194, 0x02, 0x0424, 0x01, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK = IOMUX_PAD(0x0344, 0x0194, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 = IOMUX_PAD(0x0344, 0x0194, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 = IOMUX_PAD(0x0344, 0x0194, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM0__CAN1_RX = IOMUX_PAD(0x0344, 0x0194, 0x06, 0x0360, 0x01, 0x00),
+
+ MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 = IOMUX_PAD(0x0348, 0x0198, 0x00, 0x04C8, 0x02, 0x00),
+ MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 = IOMUX_PAD(0x0348, 0x0198, 0x02, 0x0438, 0x01, 0x00),
+ MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK = IOMUX_PAD(0x0348, 0x0198, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 = IOMUX_PAD(0x0348, 0x0198, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 = IOMUX_PAD(0x0348, 0x0198, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 = IOMUX_PAD(0x0348, 0x0198, 0x06, 0x0368, 0x01, 0x00),
+
+ MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC = IOMUX_PAD(0x034C, 0x019C, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1 = IOMUX_PAD(0x034C, 0x019C, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXFS__LPSPI1_PCS0 = IOMUX_PAD(0x034C, 0x019C, 0x02, 0x0420, 0x01, 0x00),
+ MX91_PAD_SAI1_TXFS__LPUART2_DTR_B = IOMUX_PAD(0x034C, 0x019C, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXFS__MQS1_LEFT = IOMUX_PAD(0x034C, 0x019C, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXFS__GPIO1_IO11 = IOMUX_PAD(0x034C, 0x019C, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SAI1_TXC__SAI1_TX_BCLK = IOMUX_PAD(0x0350, 0x01A0, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXC__LPUART2_CTS_B = IOMUX_PAD(0x0350, 0x01A0, 0x01, 0x0460, 0x01, 0x00),
+ MX91_PAD_SAI1_TXC__LPSPI1_SIN = IOMUX_PAD(0x0350, 0x01A0, 0x02, 0x042C, 0x01, 0x00),
+ MX91_PAD_SAI1_TXC__LPUART1_DSR_B = IOMUX_PAD(0x0350, 0x01A0, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXC__CAN1_RX = IOMUX_PAD(0x0350, 0x01A0, 0x04, 0x0360, 0x02, 0x00),
+ MX91_PAD_SAI1_TXC__GPIO1_IO12 = IOMUX_PAD(0x0350, 0x01A0, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 = IOMUX_PAD(0x0354, 0x01A4, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXD0__LPUART2_RTS_B = IOMUX_PAD(0x0354, 0x01A4, 0x01, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXD0__LPSPI1_SCK = IOMUX_PAD(0x0354, 0x01A4, 0x02, 0x0428, 0x01, 0x00),
+ MX91_PAD_SAI1_TXD0__LPUART1_DTR_B = IOMUX_PAD(0x0354, 0x01A4, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXD0__CAN1_TX = IOMUX_PAD(0x0354, 0x01A4, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXD0__GPIO1_IO13 = IOMUX_PAD(0x0354, 0x01A4, 0x05, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_TXD0__SAI1_MCLK = IOMUX_PAD(0x0354, 0x01A4, 0x06, 0x04D4, 0x01, 0x00),
+
+ MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 = IOMUX_PAD(0x0358, 0x01A8, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_RXD0__SAI1_MCLK = IOMUX_PAD(0x0358, 0x01A8, 0x01, 0x04D4, 0x02, 0x00),
+ MX91_PAD_SAI1_RXD0__LPSPI1_SOUT = IOMUX_PAD(0x0358, 0x01A8, 0x02, 0x0430, 0x01, 0x00),
+ MX91_PAD_SAI1_RXD0__LPUART2_DSR_B = IOMUX_PAD(0x0358, 0x01A8, 0x03, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_RXD0__MQS1_RIGHT = IOMUX_PAD(0x0358, 0x01A8, 0x04, 0x0000, 0x00, 0x00),
+ MX91_PAD_SAI1_RXD0__GPIO1_IO14 = IOMUX_PAD(0x0358, 0x01A8, 0x05, 0x0000, 0x00, 0x00),
+
+ MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY = IOMUX_PAD(0x035C, 0x01AC, 0x00, 0x0000, 0x00, 0x00),
+ MX91_PAD_WDOG_ANY__GPIO1_IO15 = IOMUX_PAD(0x035C, 0x01AC, 0x05, 0x0000, 0x00, 0x00),
+};
+#endif /* __ASM_ARCH_IMX91_PINS_H__ */
diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h
index 0492abd..149c7b7 100644
--- a/arch/arm/include/asm/mach-imx/iomux-v3.h
+++ b/arch/arm/include/asm/mach-imx/iomux-v3.h
@@ -86,7 +86,7 @@
#define IOMUX_CONFIG_LPSR 0x20
#define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \
MUX_MODE_SHIFT)
-#ifdef CONFIG_IMX93
+#if defined(CONFIG_IMX93) || defined(CONFIG_IMX91)
#define PAD_CTL_FSEL2 (0x2 << 7)
#define PAD_CTL_FSEL3 (0x3 << 7)
#define PAD_CTL_PUE (0x1 << 9)
diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index 31ace97..109a806 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -97,6 +97,12 @@
#define is_imx9302() (is_cpu_type(MXC_CPU_IMX9302))
#define is_imx9301() (is_cpu_type(MXC_CPU_IMX9301))
+#define is_imx9121() (is_cpu_type(MXC_CPU_IMX9121))
+#define is_imx9111() (is_cpu_type(MXC_CPU_IMX9111))
+#define is_imx9101() (is_cpu_type(MXC_CPU_IMX9101))
+#define is_imx91() (is_cpu_type(MXC_CPU_IMX91) || is_cpu_type(MXC_CPU_IMX9111) || \
+ is_cpu_type(MXC_CPU_IMX9101) || is_cpu_type(MXC_CPU_IMX9121))
+
#define is_imxrt1020() (is_cpu_type(MXC_CPU_IMXRT1020))
#define is_imxrt1050() (is_cpu_type(MXC_CPU_IMXRT1050))
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 52f6c9b..dbf9ab4 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -171,7 +171,7 @@
return 3 & (el >> 2);
}
-static inline unsigned int get_sctlr(void)
+static inline unsigned long get_sctlr(void)
{
unsigned int el;
unsigned long val;
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 192c120..974cbfe 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -73,11 +73,10 @@
* Call remove function of all devices with a removal flag set.
* This may be useful for last-stage operations, like cancelling
* of DMA operation or releasing device internal buffers.
+ * dm_remove_devices_active() ensures that vital devices are removed in
+ * a second round.
*/
- dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL | DM_REMOVE_NON_VITAL);
-
- /* Remove all active vital devices next */
- dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);
+ dm_remove_devices_active();
cleanup_before_linux();
}
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 1e7dc10..9cf6037 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -16,8 +16,8 @@
config ASPEED_AST2500
bool "Support Aspeed AST2500 SoC"
- depends on DM_RESET
select CPU_ARM1176
+ select DM_RESET
help
The Aspeed AST2500 is a ARM-based SoC with arm1176 CPU.
It is used as Board Management Controller on many server boards,
diff --git a/arch/arm/mach-aspeed/ast2600/spl.c b/arch/arm/mach-aspeed/ast2600/spl.c
index 05390c1..0c5a82e 100644
--- a/arch/arm/mach-aspeed/ast2600/spl.c
+++ b/arch/arm/mach-aspeed/ast2600/spl.c
@@ -45,10 +45,10 @@
}
/* boot from UART has higher priority */
- if (scu->hwstrap2 & SCU_HWSTRAP2_BOOT_UART)
+ if (readl(&scu->hwstrap2) & SCU_HWSTRAP2_BOOT_UART)
return BOOT_DEVICE_UART;
- if (scu->hwstrap1 & SCU_HWSTRAP1_BOOT_EMMC)
+ if (readl(&scu->hwstrap1) & SCU_HWSTRAP1_BOOT_EMMC)
return BOOT_DEVICE_MMC1;
out:
diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig
index bce3089..56ce280 100644
--- a/arch/arm/mach-bcmbca/bcm47622/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM947622
bool "Broadcom 47622 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm47622"
diff --git a/arch/arm/mach-bcmbca/bcm4912/Kconfig b/arch/arm/mach-bcmbca/bcm4912/Kconfig
index b8c14d1..9844dde 100644
--- a/arch/arm/mach-bcmbca/bcm4912/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm4912/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM94912
bool "Broadcom 4912 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm4912"
diff --git a/arch/arm/mach-bcmbca/bcm63146/Kconfig b/arch/arm/mach-bcmbca/bcm63146/Kconfig
index 690cbf1..7c26742 100644
--- a/arch/arm/mach-bcmbca/bcm63146/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63146/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM963146
bool "Broadcom 63146 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63146"
diff --git a/arch/arm/mach-bcmbca/bcm63158/Kconfig b/arch/arm/mach-bcmbca/bcm63158/Kconfig
index b774443..6db7b36 100644
--- a/arch/arm/mach-bcmbca/bcm63158/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63158/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM963158
bool "Broadcom 63158 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63158"
diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig
index 73ac462..167acff 100644
--- a/arch/arm/mach-bcmbca/bcm63178/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM963178
bool "Broadcom 63178 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63178"
diff --git a/arch/arm/mach-bcmbca/bcm6756/Kconfig b/arch/arm/mach-bcmbca/bcm6756/Kconfig
index c83dcd0..bbaa45e 100644
--- a/arch/arm/mach-bcmbca/bcm6756/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6756/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96756
bool "Broadcom 6756 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6756"
diff --git a/arch/arm/mach-bcmbca/bcm6813/Kconfig b/arch/arm/mach-bcmbca/bcm6813/Kconfig
index 25a4221..0cda69c 100644
--- a/arch/arm/mach-bcmbca/bcm6813/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6813/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96813
bool "Broadcom 6813 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6813"
diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig
index 78087c7..31eaaed 100644
--- a/arch/arm/mach-bcmbca/bcm6855/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96855
bool "Broadcom 6855 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6855"
diff --git a/arch/arm/mach-bcmbca/bcm6856/Kconfig b/arch/arm/mach-bcmbca/bcm6856/Kconfig
index 6ac75cb..7b09a15 100644
--- a/arch/arm/mach-bcmbca/bcm6856/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6856/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96856
bool "Broadcom 6856 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6856"
diff --git a/arch/arm/mach-bcmbca/bcm6858/Kconfig b/arch/arm/mach-bcmbca/bcm6858/Kconfig
index a6504ba..d32107a 100644
--- a/arch/arm/mach-bcmbca/bcm6858/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6858/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96858
bool "Broadcom 6858 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6858"
diff --git a/arch/arm/mach-bcmbca/bcm6878/Kconfig b/arch/arm/mach-bcmbca/bcm6878/Kconfig
index 43f8942..2365cfd 100644
--- a/arch/arm/mach-bcmbca/bcm6878/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6878/Kconfig
@@ -8,6 +8,7 @@
config TARGET_BCM96878
bool "Broadcom 6878 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6878"
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 59d11b3..9a43bed 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -54,15 +54,8 @@
select BOARD_LATE_INIT
select IMX8QXP
-config TARGET_DENEB
- bool "Support i.MX8QXP Capricorn Deneb board"
- select BINMAN
- select BOARD_LATE_INIT
- select FACTORYSET
- select IMX8QXP
-
-config TARGET_GIEDI
- bool "Support i.MX8QXP Capricorn Giedi board"
+config TARGET_CAPRICORN
+ bool "Support i.MX8QXP Capricorn board"
select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index 5c10541..54c6b11 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -16,6 +16,12 @@
select IMX9
select ARMV8_SPL_EXCEPTION_VECTORS
+config IMX91
+ bool
+ select IMX9
+ select ARMV8_SPL_EXCEPTION_VECTORS
+
+
config SYS_SOC
default "imx9"
@@ -23,6 +29,12 @@
prompt "NXP i.MX9 board select"
optional
+config TARGET_IMX91_11X11_EVK
+ bool "imx91_11x11_evk"
+ select OF_BOARD_FIXUP
+ select IMX91
+ imply OF_UPSTREAM
+
config TARGET_IMX93_9X9_QSB
bool "imx93_qsb"
select OF_BOARD_FIXUP
@@ -45,9 +57,12 @@
bool "phycore_imx93"
select IMX93
select IMX9_LPDDR4X
+ select OF_BOARD_FIXUP
+ select OF_BOARD_SETUP
endchoice
+source "board/freescale/imx91_evk/Kconfig"
source "board/freescale/imx93_evk/Kconfig"
source "board/freescale/imx93_qsb/Kconfig"
source "board/phytec/phycore_imx93/Kconfig"
diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c
index c00be19..e65cabe 100644
--- a/arch/arm/mach-imx/imx9/clock.c
+++ b/arch/arm/mach-imx/imx9/clock.c
@@ -30,6 +30,7 @@
INT_PLL_RATE(1400000000U, 1, 175, 3), /* 1.4Ghz */
INT_PLL_RATE(1000000000U, 1, 166, 4), /* 1000Mhz */
INT_PLL_RATE(900000000U, 1, 150, 4), /* 900Mhz */
+ INT_PLL_RATE(800000000U, 1, 200, 6), /* 800Mhz */
};
static struct imx_fracpll_rate_table imx9_fracpll_tbl[] = {
@@ -37,12 +38,14 @@
FRAC_PLL_RATE(933000000U, 1, 155, 4, 1, 2), /* 933Mhz */
FRAC_PLL_RATE(800000000U, 1, 200, 6, 0, 1), /* 800Mhz */
FRAC_PLL_RATE(700000000U, 1, 145, 5, 5, 6), /* 700Mhz */
+ FRAC_PLL_RATE(600000000U, 1, 200, 8, 0, 1), /* 600Mhz */
FRAC_PLL_RATE(484000000U, 1, 121, 6, 0, 1),
FRAC_PLL_RATE(445333333U, 1, 167, 9, 0, 1),
FRAC_PLL_RATE(466000000U, 1, 155, 8, 1, 3), /* 466Mhz */
FRAC_PLL_RATE(400000000U, 1, 200, 12, 0, 1), /* 400Mhz */
FRAC_PLL_RATE(300000000U, 1, 150, 12, 0, 1),
FRAC_PLL_RATE(233000000U, 1, 174, 18, 3, 4), /* 233Mhz */
+ FRAC_PLL_RATE(200000000U, 1, 200, 24, 0, 1), /* 200Mhz */
};
/* return in khz */
@@ -723,7 +726,7 @@
/* SWO TRACE to 133M */
{SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3},
/* M33 systetick to 24M */
- {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1},
+ {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1, CLK_SOC_IMX93},
/* NIC to 250M */
{NIC_CLK_ROOT, SYS_PLL_PFD0, 4},
/* NIC_APB to 133M */
@@ -753,13 +756,17 @@
* WAKEUP_AXI to 312.5M, because of FEC only can support to 320M for
* generating MII clock at 2.5M
*/
- {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2},
+ {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2, CLK_SOC_IMX93},
+ /* Wakeup AXI 250M*/
+ {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD0, 4, CLK_SOC_IMX91},
/* SWO TRACE to 133M */
{SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3},
/* M33 systetick to 24M */
- {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1},
+ {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1, CLK_SOC_IMX93},
/* NIC to 400M */
- {NIC_CLK_ROOT, SYS_PLL_PFD1, 2},
+ {NIC_CLK_ROOT, SYS_PLL_PFD1, 2, CLK_SOC_IMX93},
+ /* NIC to 333M */
+ {NIC_CLK_ROOT, SYS_PLL_PFD0, 3, CLK_SOC_IMX91},
/* NIC_APB to 133M */
{NIC_APB_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}
};
@@ -769,8 +776,12 @@
int i;
for (i = 0; i < ARRAY_SIZE(imx_clk_ld_settings); i++) {
- ccm_clk_root_cfg(imx_clk_ld_settings[i].clk_root,
- imx_clk_ld_settings[i].src, imx_clk_ld_settings[i].div);
+ if (imx_clk_ld_settings[i].soc == CLK_SOC_ALL ||
+ (is_imx91() && imx_clk_ld_settings[i].soc == CLK_SOC_IMX91) ||
+ (is_imx93() && imx_clk_ld_settings[i].soc == CLK_SOC_IMX93)) {
+ ccm_clk_root_cfg(imx_clk_ld_settings[i].clk_root,
+ imx_clk_ld_settings[i].src, imx_clk_ld_settings[i].div);
+ }
}
}
@@ -779,8 +790,12 @@
int i;
for (i = 0; i < ARRAY_SIZE(imx_clk_settings); i++) {
- ccm_clk_root_cfg(imx_clk_settings[i].clk_root,
- imx_clk_settings[i].src, imx_clk_settings[i].div);
+ if (imx_clk_settings[i].soc == CLK_SOC_ALL ||
+ (is_imx91() && imx_clk_settings[i].soc == CLK_SOC_IMX91) ||
+ (is_imx93() && imx_clk_settings[i].soc == CLK_SOC_IMX93)) {
+ ccm_clk_root_cfg(imx_clk_settings[i].clk_root,
+ imx_clk_settings[i].src, imx_clk_settings[i].div);
+ }
}
}
@@ -857,7 +872,7 @@
return ccm_clk_root_get_rate(WAKEUP_AXI_CLK_ROOT);
}
-#if defined(CONFIG_IMX93) && defined(CONFIG_DWC_ETH_QOS)
+#if (CONFIG_IS_ENABLED(IMX93) || CONFIG_IS_ENABLED(IMX91)) && CONFIG_IS_ENABLED(DWC_ETH_QOS)
static int imx93_eqos_interface_init(struct udevice *dev, phy_interface_t interface_type)
{
struct blk_ctrl_wakeupmix_regs *bctrl =
@@ -901,12 +916,12 @@
int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type)
{
- if (IS_ENABLED(CONFIG_IMX93) &&
+ if ((IS_ENABLED(CONFIG_IMX93) || IS_ENABLED(CONFIG_IMX91)) &&
IS_ENABLED(CONFIG_DWC_ETH_QOS) &&
device_is_compatible(dev, "nxp,imx93-dwmac-eqos"))
return imx93_eqos_interface_init(dev, interface_type);
- if (IS_ENABLED(CONFIG_IMX93) &&
+ if ((IS_ENABLED(CONFIG_IMX93) || IS_ENABLED(CONFIG_IMX91)) &&
IS_ENABLED(CONFIG_FEC_MXC) &&
device_is_compatible(dev, "fsl,imx93-fec"))
return 0;
diff --git a/arch/arm/mach-imx/imx9/container.cfg b/arch/arm/mach-imx/imx9/container.cfg
index 72fe791..91a9731 100644
--- a/arch/arm/mach-imx/imx9/container.cfg
+++ b/arch/arm/mach-imx/imx9/container.cfg
@@ -6,6 +6,10 @@
BOOT_FROM SD 0x400
SOC_TYPE IMX9
CONTAINER
+#ifdef CONFIG_IMX91
+IMAGE A55 bl31.bin 0x204C0000
+#else
IMAGE A55 bl31.bin 0x204E0000
+#endif
IMAGE A55 u-boot.bin CONFIG_TEXT_BASE
-IMAGE A55 tee.bin 0x96000000
\ No newline at end of file
+IMAGE A55 tee.bin 0x96000000
diff --git a/arch/arm/mach-imx/imx9/imximage.cfg b/arch/arm/mach-imx/imx9/imximage.cfg
index d327d6a..118dfb3 100644
--- a/arch/arm/mach-imx/imx9/imximage.cfg
+++ b/arch/arm/mach-imx/imx9/imximage.cfg
@@ -5,6 +5,10 @@
BOOT_FROM SD 0x400
SOC_TYPE IMX9
+#ifdef CONFIG_IMX91
+APPEND mx91a0-ahab-container.img
+#else
APPEND mx93a1-ahab-container.img
+#endif
CONTAINER
-IMAGE A55 u-boot-spl-ddr.bin 0x2049A000
\ No newline at end of file
+IMAGE A55 u-boot-spl-ddr.bin CONFIG_SPL_TEXT_BASE
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
index 21e0e7d..bb13ca7 100644
--- a/arch/arm/mach-imx/imx9/soc.c
+++ b/arch/arm/mach-imx/imx9/soc.c
@@ -118,6 +118,8 @@
if (is_imx93())
max_speed = MHZ(1700);
+ else if (is_imx91())
+ max_speed = MHZ(1400);
/* In case the fuse of speed grade not programmed */
if (speed > max_speed)
@@ -195,7 +197,30 @@
bool npu_disable = !!(val & BIT(13));
bool core1_disable = !!(val & BIT(15));
- u32 pack_9x9_fused = BIT(4) | BIT(17) | BIT(19) | BIT(24);
+ u32 pack_9x9_fused = BIT(4) | BIT(5) | BIT(17) | BIT(19) | BIT(24);
+ u32 nxp_recog = (val & GENMASK(23, 16)) >> 16;
+
+ /* For iMX91 */
+ if (type == MXC_CPU_IMX91) {
+ switch (nxp_recog) {
+ case 0x9:
+ case 0xA:
+ type = MXC_CPU_IMX9111;
+ break;
+ case 0xD:
+ case 0xE:
+ type = MXC_CPU_IMX9121;
+ break;
+ case 0xF:
+ case 0x10:
+ type = MXC_CPU_IMX9101;
+ break;
+ default:
+ break; /* 9131 as default */
+ }
+
+ return type;
+ }
/* Low performance 93 part */
if (((val >> 6) & 0x3F) == 0xE && npu_disable)
@@ -217,8 +242,14 @@
u32 get_cpu_rev(void)
{
u32 rev = (gd->arch.soc_rev >> 24) - 0xa0;
+ u32 type;
+
+ if ((gd->arch.soc_rev & 0xFFFF) == 0x9300)
+ type = MXC_CPU_IMX93;
+ else
+ type = MXC_CPU_IMX91;
- return (get_cpu_variant_type(MXC_CPU_IMX93) << 12) |
+ return (get_cpu_variant_type(type) << 12) |
(CHIP_REV_1_0 + rev);
}
@@ -539,7 +570,8 @@
cpurev = get_cpu_rev();
- printf("CPU: i.MX93 rev%d.%d\n", (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0);
+ printf("CPU: i.MX%s rev%d.%d\n", is_imx93() ? "93" : "91",
+ (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0);
return 0;
}
@@ -634,7 +666,7 @@
return 0;
}
-#ifdef CONFIG_OF_BOARD_FIXUP
+#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_TARGET_PHYCORE_IMX93)
#ifndef CONFIG_XPL_BUILD
int board_fix_fdt(void *fdt)
{
@@ -893,7 +925,9 @@
void soc_power_init(void)
{
mix_power_init(MIX_PD_MEDIAMIX);
- mix_power_init(MIX_PD_MLMIX);
+
+ if (is_imx93())
+ mix_power_init(MIX_PD_MLMIX);
disable_isolation();
}
@@ -919,6 +953,9 @@
(struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
u32 val, i;
+ if (is_imx91())
+ return -ENODEV;
+
if (m33_is_rom_kicked())
return -EPERM;
@@ -1007,7 +1044,7 @@
u32 speed = get_cpu_speed_grade_hz();
enum imx9_soc_voltage_mode voltage = VOLT_OVER_DRIVE;
- if (is_imx93()) {
+ if (is_imx93() || is_imx91()) {
if (speed == 1700000000)
voltage = VOLT_OVER_DRIVE;
else if (speed == 1400000000)
diff --git a/arch/arm/mach-imx/imx9/trdc.c b/arch/arm/mach-imx/imx9/trdc.c
index ef0f8b5..d7593ec 100644
--- a/arch/arm/mach-imx/imx9/trdc.c
+++ b/arch/arm/mach-imx/imx9/trdc.c
@@ -484,7 +484,7 @@
}
}
-#if DEBUG
+#ifdef DEBUG
int trdc_mbc_control_dump(ulong trdc_reg, u32 mbc_x, u32 glbac_id)
{
struct trdc_mbc *mbc_base = (struct trdc_mbc *)trdc_get_mbc_base(trdc_reg, mbc_x);
diff --git a/arch/arm/mach-k3/am62ax/Makefile b/arch/arm/mach-k3/am62ax/Makefile
index e2ef881..4e35e0c 100644
--- a/arch/arm/mach-k3/am62ax/Makefile
+++ b/arch/arm/mach-k3/am62ax/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_OF_SYSTEM_SETUP) += am62a7_fdt.o
obj-$(CONFIG_XPL_BUILD) += am62a7_init.o
+obj-y += boot.o
diff --git a/arch/arm/mach-k3/am62ax/am62a7_init.c b/arch/arm/mach-k3/am62ax/am62a7_init.c
index 0f62f39..5c0d3ee 100644
--- a/arch/arm/mach-k3/am62ax/am62a7_init.c
+++ b/arch/arm/mach-k3/am62ax/am62a7_init.c
@@ -171,102 +171,7 @@
debug("am62a_init: %s done\n", __func__);
}
-static u32 __get_backup_bootmedia(u32 devstat)
-{
- u32 bkup_bootmode = (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >>
- MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT;
- u32 bkup_bootmode_cfg =
- (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >>
- MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT;
-
- switch (bkup_bootmode) {
- case BACKUP_BOOT_DEVICE_UART:
- return BOOT_DEVICE_UART;
-
- case BACKUP_BOOT_DEVICE_USB:
- return BOOT_DEVICE_USB;
-
- case BACKUP_BOOT_DEVICE_ETHERNET:
- return BOOT_DEVICE_ETHERNET;
-
- case BACKUP_BOOT_DEVICE_MMC:
- if (bkup_bootmode_cfg)
- return BOOT_DEVICE_MMC2;
- return BOOT_DEVICE_MMC1;
-
- case BACKUP_BOOT_DEVICE_SPI:
- return BOOT_DEVICE_SPI;
-
- case BACKUP_BOOT_DEVICE_I2C:
- return BOOT_DEVICE_I2C;
-
- case BACKUP_BOOT_DEVICE_DFU:
- if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK)
- return BOOT_DEVICE_USB;
- return BOOT_DEVICE_DFU;
- };
-
- return BOOT_DEVICE_RAM;
-}
-
-static u32 __get_primary_bootmedia(u32 devstat)
-{
- u32 bootmode = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
- MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
- u32 bootmode_cfg = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >>
- MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT;
-
- switch (bootmode) {
- case BOOT_DEVICE_OSPI:
- fallthrough;
- case BOOT_DEVICE_QSPI:
- fallthrough;
- case BOOT_DEVICE_XSPI:
- fallthrough;
- case BOOT_DEVICE_SPI:
- return BOOT_DEVICE_SPI;
-
- case BOOT_DEVICE_ETHERNET_RGMII:
- fallthrough;
- case BOOT_DEVICE_ETHERNET_RMII:
- return BOOT_DEVICE_ETHERNET;
-
- case BOOT_DEVICE_EMMC:
- return BOOT_DEVICE_MMC1;
-
- case BOOT_DEVICE_SPI_NAND:
- return BOOT_DEVICE_SPINAND;
-
- case BOOT_DEVICE_MMC:
- if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >>
- MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT)
- return BOOT_DEVICE_MMC2;
- return BOOT_DEVICE_MMC1;
-
- case BOOT_DEVICE_DFU:
- if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >>
- MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT)
- return BOOT_DEVICE_USB;
- return BOOT_DEVICE_DFU;
-
- case BOOT_DEVICE_NOBOOT:
- return BOOT_DEVICE_RAM;
- }
-
- return bootmode;
-}
-
u32 spl_boot_device(void)
{
- u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
- u32 bootmedia;
-
- if (bootindex == K3_PRIMARY_BOOTMODE)
- bootmedia = __get_primary_bootmedia(devstat);
- else
- bootmedia = __get_backup_bootmedia(devstat);
-
- debug("am62a_init: %s: devstat = 0x%x bootmedia = 0x%x bootindex = %d\n",
- __func__, devstat, bootmedia, bootindex);
- return bootmedia;
+ return get_boot_device();
}
diff --git a/arch/arm/mach-k3/am62ax/boot.c b/arch/arm/mach-k3/am62ax/boot.c
new file mode 100644
index 0000000..af7fce1
--- /dev/null
+++ b/arch/arm/mach-k3/am62ax/boot.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/am62a_spl.h>
+
+static u32 __get_backup_bootmedia(u32 devstat)
+{
+ u32 bkup_bootmode = (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >>
+ MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT;
+ u32 bkup_bootmode_cfg =
+ (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >>
+ MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT;
+
+ switch (bkup_bootmode) {
+ case BACKUP_BOOT_DEVICE_UART:
+ return BOOT_DEVICE_UART;
+
+ case BACKUP_BOOT_DEVICE_USB:
+ return BOOT_DEVICE_USB;
+
+ case BACKUP_BOOT_DEVICE_ETHERNET:
+ return BOOT_DEVICE_ETHERNET;
+
+ case BACKUP_BOOT_DEVICE_MMC:
+ if (bkup_bootmode_cfg)
+ return BOOT_DEVICE_MMC2;
+ return BOOT_DEVICE_MMC1;
+
+ case BACKUP_BOOT_DEVICE_SPI:
+ return BOOT_DEVICE_SPI;
+
+ case BACKUP_BOOT_DEVICE_I2C:
+ return BOOT_DEVICE_I2C;
+
+ case BACKUP_BOOT_DEVICE_DFU:
+ if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK)
+ return BOOT_DEVICE_USB;
+ return BOOT_DEVICE_DFU;
+ };
+
+ return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 devstat)
+{
+ u32 bootmode = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+ MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+ u32 bootmode_cfg = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >>
+ MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT;
+
+ switch (bootmode) {
+ case BOOT_DEVICE_OSPI:
+ fallthrough;
+ case BOOT_DEVICE_QSPI:
+ fallthrough;
+ case BOOT_DEVICE_XSPI:
+ fallthrough;
+ case BOOT_DEVICE_SPI:
+ return BOOT_DEVICE_SPI;
+
+ case BOOT_DEVICE_ETHERNET_RGMII:
+ fallthrough;
+ case BOOT_DEVICE_ETHERNET_RMII:
+ return BOOT_DEVICE_ETHERNET;
+
+ case BOOT_DEVICE_EMMC:
+ return BOOT_DEVICE_MMC1;
+
+ case BOOT_DEVICE_SPI_NAND:
+ return BOOT_DEVICE_SPINAND;
+
+ case BOOT_DEVICE_MMC:
+ if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >>
+ MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT)
+ return BOOT_DEVICE_MMC2;
+ return BOOT_DEVICE_MMC1;
+
+ case BOOT_DEVICE_DFU:
+ if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >>
+ MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT)
+ return BOOT_DEVICE_USB;
+ return BOOT_DEVICE_DFU;
+
+ case BOOT_DEVICE_NOBOOT:
+ return BOOT_DEVICE_RAM;
+ }
+
+ return bootmode;
+}
+
+u32 get_boot_device(void)
+{
+ u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+ u32 bootmode = *(u32 *)(K3_BOOT_PARAM_TABLE_INDEX_OCRAM);
+ u32 bootmedia;
+
+ if (bootmode == K3_PRIMARY_BOOTMODE)
+ bootmedia = __get_primary_bootmedia(devstat);
+ else
+ bootmedia = __get_backup_bootmedia(devstat);
+
+ debug("%s: devstat = 0x%x bootmedia = 0x%x bootmode = %d\n",
+ __func__, devstat, bootmedia, bootmode);
+
+ return bootmedia;
+}
diff --git a/arch/arm/mach-k3/am62px/am62p5_init.c b/arch/arm/mach-k3/am62px/am62p5_init.c
index 34ed01c..2d35a7c 100644
--- a/arch/arm/mach-k3/am62px/am62p5_init.c
+++ b/arch/arm/mach-k3/am62px/am62p5_init.c
@@ -159,6 +159,8 @@
}
spl_enable_cache();
+
+ setup_qos();
debug("am62px_init: %s done\n", __func__);
}
diff --git a/arch/arm/mach-k3/am62x/Kconfig b/arch/arm/mach-k3/am62x/Kconfig
index 8b0cdd7..81199ad 100644
--- a/arch/arm/mach-k3/am62x/Kconfig
+++ b/arch/arm/mach-k3/am62x/Kconfig
@@ -42,6 +42,7 @@
select SPL_RAM
select K3_DDRSS
select BINMAN
+ select PHYTEC_K3_DDR_PATCH
imply SYS_K3_SPL_ATF
config TARGET_VERDIN_AM62_A53
diff --git a/arch/arm/mach-k3/am65x/Kconfig b/arch/arm/mach-k3/am65x/Kconfig
index f17b641..72a8298 100644
--- a/arch/arm/mach-k3/am65x/Kconfig
+++ b/arch/arm/mach-k3/am65x/Kconfig
@@ -16,6 +16,7 @@
select BOARD_LATE_INIT
select BINMAN
imply TI_I2C_BOARD_DETECT
+ select OF_UPSTREAM
config TARGET_AM654_R5_EVM
bool "TI K3 based AM654 EVM running on R5"
diff --git a/arch/arm/mach-k3/j721e/j721e_init.c b/arch/arm/mach-k3/j721e/j721e_init.c
index e9ed8cb..805b28a 100644
--- a/arch/arm/mach-k3/j721e/j721e_init.c
+++ b/arch/arm/mach-k3/j721e/j721e_init.c
@@ -19,6 +19,7 @@
#include <fdtdec.h>
#include <mmc.h>
#include <remoteproc.h>
+#include <k3-avs.h>
#include "../sysfw-loader.h"
#include "../common.h"
@@ -39,6 +40,12 @@
#define NB_THREADMAP_BIT0 BIT(0)
#define NB_THREADMAP_BIT1 BIT(1)
+/* TISCI DEV ID for A72, MSMC Clock */
+#define DEV_A72SS0_CORE0_0_ID 202
+#define DEV_A72SS0_CORE0_0_ARM_CLK_CLK_ID 2
+#define DEV_A72SS0_CORE0_ID 4
+#define DEV_A72SS0_CORE0_MSMC_CLK_ID 1
+
#ifdef CONFIG_K3_LOAD_SYSFW
struct fwl_data cbass_hc_cfg0_fwls[] = {
#if defined(CONFIG_TARGET_J721E_R5_EVM)
@@ -147,6 +154,78 @@
writel(NB_THREADMAP_BIT1, (uintptr_t)NAVSS0_NBSS_NB1_CFG_NB_THREADMAP);
}
+#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
+static int get_clock_index_by_dev_id(ofnode node, u32 dev_id, u32 clk_id)
+{
+ ofnode clknode;
+ int count, i;
+ struct ofnode_phandle_args phandle_args;
+
+ clknode = ofnode_by_compatible(ofnode_null(), "ti,k2g-sci-clk");
+ if (!ofnode_valid(clknode)) {
+ printf("%s: clock-controller not found\n", __func__);
+ return -ENODEV;
+ }
+
+ count = ofnode_count_phandle_with_args(node, "assigned-clocks", "#clock-cells", 0);
+ for (i = 0; i < count; i++) {
+ if (ofnode_parse_phandle_with_args(node, "assigned-clocks",
+ "#clock-cells", 0, i, &phandle_args)) {
+ printf("%s: Could not parse assigned-clocks at index %d\n", __func__, i);
+ continue;
+ }
+ if (ofnode_equal(clknode, phandle_args.node) &&
+ phandle_args.args[0] == dev_id && phandle_args.args[1] == clk_id)
+ return i;
+ }
+ return -1;
+}
+
+static int fdt_fixup_a72ss_clock_frequency(void)
+{
+ int index, size;
+ u32 *rates;
+ ofnode node;
+
+ node = ofnode_by_compatible(ofnode_null(), "ti,am654-rproc");
+ if (!ofnode_valid(node)) {
+ printf("%s: A72 not found\n", __func__);
+ return -ENODEV;
+ }
+
+ rates = fdt_getprop_w(ofnode_to_fdt(node), ofnode_to_offset(node),
+ "assigned-clock-rates", &size);
+ if (!rates) {
+ printf("%s: Wrong A72 assigned-clocks-rates configuration\n", __func__);
+ return -1;
+ }
+
+ /* Update A72 Clock Frequency to OPP_LOW spec */
+ index = get_clock_index_by_dev_id(node,
+ DEV_A72SS0_CORE0_0_ID,
+ DEV_A72SS0_CORE0_0_ARM_CLK_CLK_ID);
+ if (index < 0 || index >= (size / sizeof(u32))) {
+ printf("%s: Wrong A72 assigned-clocks configuration\n", __func__);
+ return -1;
+ }
+ rates[index] = cpu_to_fdt32(1000000000);
+ printf("Changed A72 CPU frequency to %dHz in DT\n", 1000000000);
+
+ /* Update MSMC Clock Frequency to OPP_LOW spec */
+ index = get_clock_index_by_dev_id(node,
+ DEV_A72SS0_CORE0_ID,
+ DEV_A72SS0_CORE0_MSMC_CLK_ID);
+ if (index < 0 || index >= (size / sizeof(u32))) {
+ printf("%s: Wrong A72 assigned-clocks configuration\n", __func__);
+ return -1;
+ }
+ rates[index] = cpu_to_fdt32(500000000);
+ printf("Changed MSMC frequency to %dHz in DT\n", 500000000);
+
+ return 0;
+}
+#endif
+
/*
* This uninitialized global variable would normal end up in the .bss section,
* but the .bss is cleared between writing and reading this variable, so move
@@ -301,8 +380,19 @@
#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
&dev);
- if (ret)
+ if (ret) {
printf("AVS init failed: %d\n", ret);
+ } else if (IS_ENABLED(CONFIG_K3_OPP_LOW)) {
+ ret = k3_avs_check_opp(dev, J721E_VDD_MPU, AM6_OPP_LOW);
+ if (ret) {
+ printf("OPP_LOW: k3_avs_check_opp failed: %d\n", ret);
+ } else {
+ ret = fdt_fixup_a72ss_clock_frequency();
+ if (ret)
+ printf("OPP_LOW: fdt_fixup_a72ss_clock_frequency failed: %d\n",
+ ret);
+ }
+ }
#endif
#if defined(CONFIG_K3_J721E_DDRSS)
diff --git a/arch/arm/mach-k3/j722s/j722s_init.c b/arch/arm/mach-k3/j722s/j722s_init.c
index 01b0068..0313e11 100644
--- a/arch/arm/mach-k3/j722s/j722s_init.c
+++ b/arch/arm/mach-k3/j722s/j722s_init.c
@@ -165,6 +165,7 @@
{
k3_spl_init();
k3_mem_init();
+ setup_qos();
}
static u32 __get_backup_bootmedia(u32 devstat)
diff --git a/arch/arm/mach-k3/j784s4/j784s4_init.c b/arch/arm/mach-k3/j784s4/j784s4_init.c
index 07b5d7d..8a41cd3 100644
--- a/arch/arm/mach-k3/j784s4/j784s4_init.c
+++ b/arch/arm/mach-k3/j784s4/j784s4_init.c
@@ -233,9 +233,19 @@
void board_init_f(ulong dummy)
{
+ struct udevice *dev;
+ int ret;
+
k3_spl_init();
k3_mem_init();
+ if (IS_ENABLED(CONFIG_CPU_V7R) && IS_ENABLED(CONFIG_K3_AVS0)) {
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
+ &dev);
+ if (ret)
+ printf("AVS init failed: %d\n", ret);
+ }
+
if (IS_ENABLED(CONFIG_CPU_V7R))
setup_navss_nb();
diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig
index 878087f..1233588 100644
--- a/arch/arm/mach-k3/r5/Kconfig
+++ b/arch/arm/mach-k3/r5/Kconfig
@@ -1,6 +1,13 @@
config K3_LOAD_SYSFW
bool
+config K3_OPP_LOW
+ depends on ARCH_K3 && K3_AVS0
+ bool "Enable OPP_LOW on supported TI K3 SoCs"
+ help
+ Enabling this will allow Socs with the proper efuse to run at a lower
+ MPU core voltage and adjust frequency according to SoC TRM
+
config K3_QOS
bool "Enable Quality of Service (QoS) Settings for TI K3 SoCs"
default y if SOC_K3_AM62A7
diff --git a/arch/arm/mach-k3/r5/am62px/Makefile b/arch/arm/mach-k3/r5/am62px/Makefile
index 091d4fa..066c3ce 100644
--- a/arch/arm/mach-k3/r5/am62px/Makefile
+++ b/arch/arm/mach-k3/r5/am62px/Makefile
@@ -4,3 +4,4 @@
obj-y += clk-data.o
obj-y += dev-data.o
+obj-y += am62p_qos_uboot.o
diff --git a/arch/arm/mach-k3/r5/am62px/am62p_qos.h b/arch/arm/mach-k3/r5/am62px/am62p_qos.h
new file mode 100644
index 0000000..99e2ee4
--- /dev/null
+++ b/arch/arm/mach-k3/r5/am62px/am62p_qos.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Keystone3 Quality of service endpoint definitions
+ * Auto generated by K3 Resource Partitioning Tool
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#define PULSAR_UL_WKUP_0_CPU0_RMST 0x45D14000
+#define PULSAR_UL_WKUP_0_CPU0_WMST 0x45D14400
+#define PULSAR_UL_WKUP_0_CPU0_PMST 0x45D14800
+#define PULSAR_UL_MAIN_0_CPU0_RMST 0x45D15000
+#define PULSAR_UL_MAIN_0_CPU0_WMST 0x45D15400
+#define PULSAR_UL_MAIN_0_CPU0_PMST 0x45D15800
+#define PULSAR_ULS_MCU_0_CPU0_RMST 0x45D18000
+#define PULSAR_ULS_MCU_0_CPU0_WMST 0x45D18400
+#define PULSAR_ULS_MCU_0_CPU0_PMST 0x45D18800
+#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_R 0x45D20400
+#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_W 0x45D20800
+#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMW 0x45D21800
+#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMR 0x45D21C00
+#define GIC500SS_1_4_MAIN_0_MEM_WR_VBUSM 0x45D22000
+#define GIC500SS_1_4_MAIN_0_MEM_RD_VBUSM 0x45D22400
+#define EMMCSD4SS_MAIN_0_EMMCSDSS_RD 0x45D23000
+#define EMMCSD4SS_MAIN_0_EMMCSDSS_WR 0x45D23400
+#define EMMCSD4SS_MAIN_1_EMMCSDSS_WR 0x45D23800
+#define EMMCSD4SS_MAIN_1_EMMCSDSS_RD 0x45D23C00
+#define SA3SS_AM62A_MAIN_0_CTXCACH_EXT_DMA 0x45D25400
+#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_R_ASYNC 0x45D26800
+#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_W_ASYNC 0x45D26C00
+#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_R_ASYNC 0x45D27000
+#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_W_ASYNC 0x45D27400
+#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_W_SYNC 0x45D29800
+#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_R_SYNC 0x45D2A000
+#define K3_DSS_UL_MAIN_0_VBUSM_DMA 0x45D30000
+#define K3_DSS_UL_MAIN_1_VBUSM_DMA 0x45D30400
+#define USB2SS_16FFC_MAIN_0_MSTR0 0x45D34000
+#define USB2SS_16FFC_MAIN_0_MSTW0 0x45D34400
+#define EMMC8SS_16FFC_MAIN_0_EMMCSS_WR 0x45D34800
+#define EMMC8SS_16FFC_MAIN_0_EMMCSS_RD 0x45D34C00
+#define USB2SS_16FFC_MAIN_1_MSTR0 0x45D35000
+#define USB2SS_16FFC_MAIN_1_MSTW0 0x45D35400
diff --git a/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c b/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c
new file mode 100644
index 0000000..d25512a
--- /dev/null
+++ b/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * am62p Quality of Service (QoS) Configuration Data
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <asm/arch/k3-qos.h>
+#include "am62p_qos.h"
+
+struct k3_qos_data qos_data[] = {
+ /* modules_qosConfig0 - 1 endpoints, 4 channels */
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 0),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 1),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 2),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 3),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+
+ /* modules_qosConfig1 - 1 endpoints, 4 channels */
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 0),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 1),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 2),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 3),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+
+ /* Following registers set 1:1 mapping for orderID MAP1/MAP2
+ * remap registers. orderID x is remapped to orderID x again
+ * This is to ensure orderID from MAP register is unchanged
+ */
+
+ /* K3_DSS_UL_MAIN_0_VBUSM_DMA - 0 groups */
+
+ /* K3_DSS_UL_MAIN_1_VBUSM_DMA - 0 groups */
+};
+
+u32 qos_count = ARRAY_SIZE(qos_data);
diff --git a/arch/arm/mach-k3/r5/j722s/Makefile b/arch/arm/mach-k3/r5/j722s/Makefile
index 2a0dbf5..2f0b35a 100644
--- a/arch/arm/mach-k3/r5/j722s/Makefile
+++ b/arch/arm/mach-k3/r5/j722s/Makefile
@@ -4,3 +4,4 @@
obj-y += clk-data.o
obj-y += dev-data.o
+obj-y += j722s_qos_uboot.o
diff --git a/arch/arm/mach-k3/r5/j722s/j722s_qos.h b/arch/arm/mach-k3/r5/j722s/j722s_qos.h
new file mode 100644
index 0000000..88fa208
--- /dev/null
+++ b/arch/arm/mach-k3/r5/j722s/j722s_qos.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Keystone3 Quality of service endpoint definitions
+ * Auto generated by K3 Resource Partitioning Tool
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#define PULSAR_UL_WKUP_0_CPU0_RMST 0x45D14000
+#define PULSAR_UL_WKUP_0_CPU0_WMST 0x45D14400
+#define PULSAR_UL_WKUP_0_CPU0_PMST 0x45D14800
+#define PULSAR_UL_MAIN_0_CPU0_RMST 0x45D15000
+#define PULSAR_UL_MAIN_0_CPU0_WMST 0x45D15400
+#define PULSAR_UL_MAIN_0_CPU0_PMST 0x45D15800
+#define PULSAR_ULS_MCU_0_CPU0_RMST 0x45D18000
+#define PULSAR_ULS_MCU_0_CPU0_WMST 0x45D18400
+#define PULSAR_ULS_MCU_0_CPU0_PMST 0x45D18800
+#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_R 0x45D20400
+#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_W 0x45D20800
+#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMW 0x45D21800
+#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMR 0x45D21C00
+#define GIC500SS_1_4_MAIN_0_MEM_WR_VBUSM 0x45D22000
+#define GIC500SS_1_4_MAIN_0_MEM_RD_VBUSM 0x45D22400
+#define EMMCSD4SS_MAIN_0_EMMCSDSS_RD 0x45D23000
+#define EMMCSD4SS_MAIN_0_EMMCSDSS_WR 0x45D23400
+#define EMMCSD4SS_MAIN_1_EMMCSDSS_WR 0x45D23800
+#define EMMCSD4SS_MAIN_1_EMMCSDSS_RD 0x45D23C00
+#define USB3P0SS64_16FFC_MAIN_0_MSTR0 0x45D24800
+#define USB3P0SS64_16FFC_MAIN_0_MSTW0 0x45D24C00
+#define SA3SS_AM62A_MAIN_0_CTXCACH_EXT_DMA 0x45D25400
+#define K3_JPGENC_E5010_MAIN_0_M_VBUSM_W 0x45D25800
+#define K3_JPGENC_E5010_MAIN_0_M_VBUSM_R 0x45D25C00
+#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_R_ASYNC 0x45D26800
+#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_W_ASYNC 0x45D26C00
+#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_R_ASYNC 0x45D27000
+#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_W_ASYNC 0x45D27400
+#define SAM67_C7XV_WRAP_MAIN_0_C7XV_SOC 0x45D27800
+#define SAM67_VPAC_WRAP_MAIN_0_LDC0_M_MST 0x45D28000
+#define PCIE_G2X1_64_MAIN_0_PCIE_MST_RD 0x45D29000
+#define PCIE_G2X1_64_MAIN_0_PCIE_MST_WR 0x45D29400
+#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_W_SYNC 0x45D29800
+#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_R_SYNC 0x45D2A000
+#define SAM67_C7XV_WRAP_MAIN_1_C7XV_SOC 0x45D2C000
+#define K3_DSS_UL_MAIN_0_VBUSM_DMA 0x45D30000
+#define K3_DSS_UL_MAIN_1_VBUSM_DMA 0x45D30400
+#define USB2SS_16FFC_MAIN_0_MSTR0 0x45D34000
+#define USB2SS_16FFC_MAIN_0_MSTW0 0x45D34400
+#define EMMC8SS_16FFC_MAIN_0_EMMCSS_WR 0x45D34800
+#define EMMC8SS_16FFC_MAIN_0_EMMCSS_RD 0x45D34C00
+#define USB2SS_16FFC_MAIN_1_MSTR0 0x45D35000
+#define USB2SS_16FFC_MAIN_1_MSTW0 0x45D35400
diff --git a/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c b/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c
new file mode 100644
index 0000000..1d59f49
--- /dev/null
+++ b/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * j722s Quality of Service (QoS) Configuration Data
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <asm/arch/k3-qos.h>
+#include "j722s_qos.h"
+
+struct k3_qos_data qos_data[] = {
+ /* modules_qosConfig0 - 1 endpoints, 4 channels */
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 0),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 1),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 2),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 3),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+
+ /* modules_qosConfig1 - 1 endpoints, 4 channels */
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 0),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 1),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 2),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+ {
+ .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 3),
+ .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0),
+ },
+
+ /* Following registers set 1:1 mapping for orderID MAP1/MAP2
+ * remap registers. orderID x is remapped to orderID x again
+ * This is to ensure orderID from MAP register is unchanged
+ */
+
+ /* K3_DSS_UL_MAIN_0_VBUSM_DMA - 0 groups */
+
+ /* K3_DSS_UL_MAIN_1_VBUSM_DMA - 0 groups */
+};
+
+u32 qos_count = ARRAY_SIZE(qos_data);
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c1a1a33..adb8169 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -215,9 +215,16 @@
bool "Support Allied Telesis x530"
select 88F6820
+config TARGET_X250
+ bool "Support Allied Telesis x250"
+ select ARMADA_8K
+ imply SCSI
+ imply BOOTSTD_DEFAULTS
+
config TARGET_X240
bool "Support Allied Telesis x240"
select ALLEYCAT_5
+ imply BOOTSTD_DEFAULTS
config TARGET_DB_XC3_24G4XG
bool "Support DB-XC3-24G4XG"
@@ -301,6 +308,7 @@
default "theadorable" if TARGET_THEADORABLE
default "a38x" if TARGET_CONTROLCENTERDC
default "x530" if TARGET_X530
+ default "x250" if TARGET_X250
default "x240" if TARGET_X240
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
@@ -325,6 +333,7 @@
default "turris_mox" if TARGET_TURRIS_MOX
default "controlcenterdc" if TARGET_CONTROLCENTERDC
default "x530" if TARGET_X530
+ default "x250" if TARGET_X250
default "x240" if TARGET_X240
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
@@ -349,6 +358,7 @@
default "CZ.NIC" if TARGET_TURRIS_MOX
default "gdsys" if TARGET_CONTROLCENTERDC
default "alliedtelesis" if TARGET_X530
+ default "alliedtelesis" if TARGET_X250
default "alliedtelesis" if TARGET_X240
default "mikrotik" if TARGET_CRS3XX_98DX3236
default "Marvell" if TARGET_MVEBU_ALLEYCAT5
diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig
index 536960b..976c0e3 100644
--- a/arch/arm/mach-snapdragon/Kconfig
+++ b/arch/arm/mach-snapdragon/Kconfig
@@ -11,6 +11,9 @@
Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD>
will be used as the custom board directory.
+config SYS_MALLOC_LEN
+ default 0x10000000
+
config SYS_MALLOC_F_LEN
default 0x2000
@@ -20,6 +23,9 @@
config SPL_SYS_MALLOC_F_LEN
default 0x2000
+config SYS_MALLOC_LEN
+ default 0x800000
+
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
default 0x80000000
diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile
index 7a4495c..343e825 100644
--- a/arch/arm/mach-snapdragon/Makefile
+++ b/arch/arm/mach-snapdragon/Makefile
@@ -3,4 +3,5 @@
# (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
obj-y += board.o
+obj-$(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) += capsule_update.o
obj-$(CONFIG_OF_LIVE) += of_fixup.o
diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c
index 2ab2ceb..75a880f 100644
--- a/arch/arm/mach-snapdragon/board.c
+++ b/arch/arm/mach-snapdragon/board.c
@@ -6,7 +6,9 @@
* Author: Caleb Connolly <caleb.connolly@linaro.org>
*/
-#include "time.h"
+#define LOG_CATEGORY LOGC_BOARD
+#define pr_fmt(fmt) "QCOM: " fmt
+
#include <asm/armv8/mmu.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -29,6 +31,7 @@
#include <fdt_support.h>
#include <usb.h>
#include <sort.h>
+#include <time.h>
#include "qcom-priv.h"
@@ -448,6 +451,9 @@
configure_env();
qcom_late_init();
+ /* Configure the dfu_string for capsule updates */
+ qcom_configure_capsule_updates();
+
return 0;
}
diff --git a/arch/arm/mach-snapdragon/capsule_update.c b/arch/arm/mach-snapdragon/capsule_update.c
new file mode 100644
index 0000000..bf75a9a
--- /dev/null
+++ b/arch/arm/mach-snapdragon/capsule_update.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Capsule update support for Qualcomm boards.
+ *
+ * Copyright (c) 2024 Linaro Ltd.
+ * Author: Caleb Connolly <caleb.connolly@linaro.org>
+ */
+
+#define pr_fmt(fmt) "QCOM-FMP: " fmt
+
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <efi.h>
+#include <efi_loader.h>
+#include <malloc.h>
+#include <scsi.h>
+#include <part.h>
+#include <linux/err.h>
+
+#include "qcom-priv.h"
+
+/*
+ * NOTE: for now this implementation only supports the rb3gen2. Supporting other
+ * boards that boot in different ways (e.g. chainloaded from ABL) will require
+ * additional complexity to properly create the dfu string and fw_images array.
+ */
+
+/*
+ * To handle different variants like chainloaded U-Boot here we'll need to
+ * build the fw_images array dynamically at runtime. It looks like
+ * mach-rockchip is a good example for how to do this.
+ * Detecting which image types a board uses is TBD, hence for now we only
+ * support the one new board that runs U-Boot as its primary bootloader.
+ */
+struct efi_fw_image fw_images[] = {
+ {
+ /* U-Boot flashed to the uefi_X partition (e.g. rb3gen2) */
+ .fw_name = u"UBOOT_UEFI_PARTITION",
+ .image_index = 1,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ /* Filled in by configure_dfu_string() */
+ .dfu_string = NULL,
+ .num_images = ARRAY_SIZE(fw_images),
+ .images = fw_images,
+};
+
+/* LSB first */
+struct part_slot_status {
+ u16: 2;
+ u16 active : 1;
+ u16: 3;
+ u16 successful : 1;
+ u16 unbootable : 1;
+ u16 tries_remaining : 4;
+};
+
+static int find_boot_partition(const char *partname, struct blk_desc *blk_dev, char *name)
+{
+ int ret;
+ int partnum;
+ struct disk_partition info;
+ struct part_slot_status *slot_status;
+
+ for (partnum = 1;; partnum++) {
+ ret = part_get_info(blk_dev, partnum, &info);
+ if (ret)
+ return ret;
+
+ slot_status = (struct part_slot_status *)&info.type_flags;
+ log_io("%16s: Active: %1d, Successful: %1d, Unbootable: %1d, Tries left: %1d\n",
+ info.name, slot_status->active,
+ slot_status->successful, slot_status->unbootable,
+ slot_status->tries_remaining);
+ /*
+ * FIXME: eventually we'll want to find the active/inactive variant of the partition
+ * but on the rb3gen2 these values might all be 0
+ */
+ if (!strncmp(info.name, partname, strlen(partname))) {
+ log_debug("Found active %s partition: '%s'!\n", partname, info.name);
+ strlcpy(name, info.name, sizeof(info.name));
+ return partnum;
+ }
+ }
+
+ return -1;
+}
+
+/**
+ * qcom_configure_capsule_updates() - Configure the DFU string for capsule updates
+ *
+ * U-Boot is flashed to the boot partition on Qualcomm boards. In most cases there
+ * are two boot partitions, boot_a and boot_b. As we don't currently support doing
+ * full A/B updates, we only support updating the currently active boot partition.
+ *
+ * So we need to find the current slot suffix and the associated boot partition.
+ * We do this by looking for the boot partition that has the 'active' flag set
+ * in the GPT partition vendor attribute bits.
+ */
+void qcom_configure_capsule_updates(void)
+{
+ struct blk_desc *desc;
+ int ret = 0, partnum = -1, devnum;
+ static char dfu_string[32] = { 0 };
+ char name[32]; /* GPT partition name */
+ char *partname = "uefi_a";
+ struct udevice *dev = NULL;
+
+ if (IS_ENABLED(CONFIG_SCSI)) {
+ /* Scan for SCSI devices */
+ ret = scsi_scan(false);
+ if (ret) {
+ debug("Failed to scan SCSI devices: %d\n", ret);
+ return;
+ }
+ }
+
+ uclass_foreach_dev_probe(UCLASS_BLK, dev) {
+ if (device_get_uclass_id(dev) != UCLASS_BLK)
+ continue;
+
+ desc = dev_get_uclass_plat(dev);
+ if (!desc || desc->part_type == PART_TYPE_UNKNOWN)
+ continue;
+ devnum = desc->devnum;
+ partnum = find_boot_partition(partname, desc,
+ name);
+ if (partnum >= 0)
+ break;
+ }
+
+ if (partnum < 0) {
+ log_err("Failed to find boot partition\n");
+ return;
+ }
+
+ switch (desc->uclass_id) {
+ case UCLASS_SCSI:
+ snprintf(dfu_string, 32, "scsi %d=u-boot.bin part %d", devnum, partnum);
+ break;
+ case UCLASS_MMC:
+ snprintf(dfu_string, 32, "mmc 0=u-boot.bin part %d %d", devnum, partnum);
+ break;
+ default:
+ debug("Unsupported storage uclass: %d\n", desc->uclass_id);
+ return;
+ }
+ log_debug("boot partition is %s, DFU string: '%s'\n", name, dfu_string);
+
+ update_info.dfu_string = dfu_string;
+}
diff --git a/arch/arm/mach-snapdragon/qcom-priv.h b/arch/arm/mach-snapdragon/qcom-priv.h
index 0a7ed5e..74d3919 100644
--- a/arch/arm/mach-snapdragon/qcom-priv.h
+++ b/arch/arm/mach-snapdragon/qcom-priv.h
@@ -3,6 +3,12 @@
#ifndef __QCOM_PRIV_H__
#define __QCOM_PRIV_H__
+#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)
+void qcom_configure_capsule_updates(void);
+#else
+void qcom_configure_capsule_updates(void) {}
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
#if CONFIG_IS_ENABLED(OF_LIVE)
/**
* qcom_of_fixup_nodes() - Fixup Qualcomm DT nodes
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index aea1362..92d61e8 100644
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -132,6 +132,20 @@
even if no eFuses were burnt. This option restores the interface if
possible.
+config BL31_LOAD_ADDR
+ hex "Load address of BL31 image (mostly TF-A)"
+ default 0xfffea000
+ help
+ The load address for the BL31 image. This value is used to build the
+ FIT image header that places BL31 in memory where it will run.
+
+config BL32_LOAD_ADDR
+ hex "Load address of BL32 image (mostly secure OS)"
+ default 0
+ help
+ The load address for the BL32 image. This value is used to build the
+ FIT image header that places BL32 in memory where it will run.
+
config ZYNQ_SDHCI_MAX_FREQ
default 200000000
diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
index 49e449e..3c372bd 100644
--- a/arch/arm/mach-zynqmp/include/mach/hardware.h
+++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -188,6 +188,8 @@
u32 gen_storage4; /* 0x40 */
u32 reserved1[1];
u32 gen_storage6; /* 0x48 */
+ u32 reserved2[3];
+ u32 pers_gen_storage2; /* 0x58 */
};
#define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR)
diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
deleted file mode 100755
index cdecb1c..0000000
--- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
+++ /dev/null
@@ -1,240 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-#
-# script to generate FIT image source for Xilinx ZynqMP boards with
-# ARM Trusted Firmware and multiple device trees (given on the command line)
-#
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
-
-BL33="u-boot-nodtb.bin"
-[ -z "$BL31" ] && BL31="bl31.bin"
-BL31_ELF="${BL31%.*}.elf"
-[ -f ${BL31_ELF} ] && ATF_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL31_ELF}" | \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000"
-ATF_LOAD_ADDR_LOW=`printf 0x%x $((ATF_LOAD_ADDR & 0xffffffff))`
-ATF_LOAD_ADDR_HIGH=`printf 0x%x $((ATF_LOAD_ADDR >> 32))`
-
-[ -z "$BL32" ] && BL32="tee.bin"
-BL32_ELF="${BL32%.*}.elf"
-[ -f ${BL32_ELF} ] && TEE_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL32_ELF}" | \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0x60000000"
-TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))`
-TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))`
-
-if [ -z "$BL33_LOAD_ADDR" ];then
- BL33_LOAD_ADDR=`awk '/CONFIG_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
-fi
-BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))`
-BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))`
-
-DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }' include/generated/autoconf.h`
-if [ ! -z "$DTB_LOAD_ADDR" ]; then
- DTB_LOAD_ADDR_LOW=`printf 0x%x $((DTB_LOAD_ADDR & 0xffffffff))`
- DTB_LOAD_ADDR_HIGH=`printf 0x%x $((DTB_LOAD_ADDR >> 32))`
- DTB_LOAD="load = <$DTB_LOAD_ADDR_HIGH $DTB_LOAD_ADDR_LOW>;"
-else
- DTB_LOAD=""
-fi
-
-if [ -z "$*" ]; then
- DT=arch/arm/dts/${DEVICE_TREE}.dtb
-else
- DT=$*
-fi
-
-if [ ! -f $BL31 ]; then
- echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2
- BL31=/dev/null
-fi
-
-cat << __HEADER_EOF
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-/dts-v1/;
-
-/ {
- description = "Configuration for Xilinx ZynqMP SoC";
-
- images {
- uboot {
- description = "U-Boot (64-bit)";
- data = /incbin/("$BL33");
- type = "firmware";
- os = "u-boot";
- arch = "arm64";
- compression = "none";
- load = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
- entry = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__HEADER_EOF
-
-if [ -f $BL31 ]; then
-cat << __ATF
- atf {
- description = "Trusted Firmware-A";
- data = /incbin/("$BL31");
- type = "firmware";
- os = "arm-trusted-firmware";
- arch = "arm64";
- compression = "none";
- load = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
- entry = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__ATF
-fi
-
-if [ -f $BL32 ]; then
-cat << __TEE
- tee {
- description = "TEE firmware";
- data = /incbin/("$BL32");
- type = "firmware";
- os = "tee";
- arch = "arm64";
- compression = "none";
- load = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
- entry = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__TEE
-fi
-
-MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }' include/generated/autoconf.h`
-
-if [ 1"$MULTI_DTB" -eq 11 ]; then
- cat << __FDT_IMAGE_EOF
- fdt_1 {
- description = "Multi DTB fit image";
- data = /incbin/("fit-dtb.blob");
- type = "flat_dt";
- arch = "arm64";
- compression = "none";
- $DTB_LOAD
- hash {
- algo = "md5";
- };
- };
- };
- configurations {
- default = "config_1";
-__FDT_IMAGE_EOF
-
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB without TF-A";
- firmware = "uboot";
- loadables = "fdt_1";
- };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB with TF-A and TEE";
- firmware = "atf";
- loadables = "uboot", "tee", "fdt_1";
- };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB with TF-A";
- firmware = "atf";
- loadables = "uboot", "fdt_1";
- };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cat << __ITS_EOF
- };
-};
-__ITS_EOF
-
-else
-
-DEFAULT=1
-cnt=1
-for dtname in $DT
-do
- cat << __FDT_IMAGE_EOF
- fdt_$cnt {
- description = "$(basename $dtname .dtb)";
- data = /incbin/("$dtname");
- type = "flat_dt";
- arch = "arm64";
- compression = "none";
- $DTB_LOAD
- hash {
- algo = "md5";
- };
- };
-__FDT_IMAGE_EOF
-
-[ "x$(basename $dtname .dtb)" = "x${DEVICE_TREE}" ] && DEFAULT=$cnt
-
-cnt=$((cnt+1))
-done
-
-cat << __CONF_HEADER_EOF
- };
- configurations {
- default = "config_$DEFAULT";
-
-__CONF_HEADER_EOF
-
-cnt=1
-for dtname in $DT
-do
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "uboot";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "atf";
- loadables = "uboot", "tee";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "atf";
- loadables = "uboot";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cnt=$((cnt+1))
-done
-
-cat << __ITS_EOF
- };
-};
-__ITS_EOF
-
-fi
diff --git a/arch/arm/mach-zynqmp/mp.c b/arch/arm/mach-zynqmp/mp.c
index 6e6da80..448bc53 100644
--- a/arch/arm/mach-zynqmp/mp.c
+++ b/arch/arm/mach-zynqmp/mp.c
@@ -352,7 +352,7 @@
*/
flush_dcache_all();
- if (!strncmp(argv[1], "lockstep", 8)) {
+ if (!strcmp(argv[1], "lockstep") || !strcmp(argv[1], "0")) {
if (nr != ZYNQMP_CORE_RPU0) {
printf("Lockstep mode should run on ZYNQMP_CORE_RPU0\n");
return 1;
@@ -369,7 +369,7 @@
dcache_enable();
set_r5_halt_mode(nr, RELEASE, LOCK);
mark_r5_used(nr, LOCK);
- } else if (!strncmp(argv[1], "split", 5)) {
+ } else if (!strcmp(argv[1], "split") || !strcmp(argv[1], "1")) {
printf("R5 split mode\n");
set_r5_reset(nr, SPLIT);
set_r5_tcm_mode(SPLIT);
diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c
index 8250297..76c610b 100644
--- a/arch/riscv/lib/bootm.c
+++ b/arch/riscv/lib/bootm.c
@@ -57,7 +57,7 @@
* This may be useful for last-stage operations, like cancelling
* of DMA operation or releasing device internal buffers.
*/
- dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);
+ dm_remove_devices_active();
cleanup_before_linux();
}
diff --git a/arch/sandbox/cpu/cache.c b/arch/sandbox/cpu/cache.c
index c8a5e64..96b3da4 100644
--- a/arch/sandbox/cpu/cache.c
+++ b/arch/sandbox/cpu/cache.c
@@ -4,12 +4,18 @@
*/
#include <cpu_func.h>
+#include <mapmem.h>
#include <asm/state.h>
void flush_cache(unsigned long addr, unsigned long size)
{
+ void *ptr;
+
+ ptr = map_sysmem(addr, size);
+
/* Clang uses (char *) parameters, GCC (void *) */
- __builtin___clear_cache((void *)addr, (void *)(addr + size));
+ __builtin___clear_cache(map_sysmem(addr, size), ptr + size);
+ unmap_sysmem(ptr);
}
void invalidate_icache_all(void)
diff --git a/arch/sandbox/dts/other.dts b/arch/sandbox/dts/other.dts
index 395a792..515d634 100644
--- a/arch/sandbox/dts/other.dts
+++ b/arch/sandbox/dts/other.dts
@@ -8,13 +8,15 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
/ {
compatible = "sandbox-other";
#address-cells = <1>;
#size-cells = <1>;
node {
- target = <&target 3 4>;
+ other-phandle = <&target>;
subnode {
compatible = "sandbox-other2";
@@ -25,9 +27,34 @@
};
};
+ other-a-test {
+ other-test-gpios = <&other_gpio_a 1>, <&other_gpio_a 4>,
+ <&other_gpio_b 5 GPIO_ACTIVE_HIGH 3 2 1>,
+ <0>, <&other_gpio_a 12>;
+ other-phandle-value = <&other_gpio_c 10>, <0xFFFFFFFF 20>, <&other_gpio_a 30>;
+ other-phandle-nodes = <&other_phandle_node_1>, <&other_phandle_node_2>;
+ };
+
+ other_gpio_a: other-gpio-a {
+ #gpio-cells = <1>;
+ };
+
+ other_gpio_b: other-gpio-b {
+ #gpio-cells = <5>;
+ };
+
+ other_gpio_c: other-gpio-c {
+ #gpio-cells = <2>;
+ };
+
+ other_phandle_node_1: other-phandle-node-1 {
+ };
+
+ other_phandle_node_2: other-phandle-node-2 {
+ };
+
target: target {
compatible = "sandbox-other2";
- #gpio-cells = <2>;
str-prop = "other";
reg = <0x8000 0x100>;
status = "disabled";
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index dee2801..ae52b37 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -44,6 +44,7 @@
mmc5 = "/mmc5";
mmc6 = "/mmc6";
mmc7 = "/mmc7";
+ mmc8 = "/mmc8";
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
@@ -101,11 +102,12 @@
bootscr-ram-offset = /bits/ 64 <0x12345678>;
bootscr-flash-offset = /bits/ 64 <0>;
bootscr-flash-size = /bits/ 64 <0x2000>;
- boot-led = "sandbox:green";
- activity-led = "sandbox:red";
+ boot-led = <&sandbox_led_green>;
+ activity-led = <&sandbox_led_red>;
testing-bool;
testing-int = <123>;
testing-str = "testing";
+ testing-phandle = <&phandle_node_1>;
};
};
@@ -296,6 +298,12 @@
compatible = "sandbox,dsi-host";
};
+ phandle_node_1: phandle-node-1 {
+ };
+
+ phandle_node_2: phandle-node-2 {
+ };
+
a-test {
reg = <0 1>;
compatible = "denx,u-boot-fdt-test";
@@ -334,6 +342,7 @@
interrupts-extended = <&irq 3 0>;
acpi,name = "GHIJ";
phandle-value = <&gpio_c 10>, <0xFFFFFFFF 20>, <&gpio_a 30>;
+ phandle-nodes = <&phandle_node_1>, <&phandle_node_2>;
mux-controls = <&muxcontroller0 0>, <&muxcontroller0 1>,
<&muxcontroller0 2>, <&muxcontroller0 3>,
@@ -980,12 +989,12 @@
leds {
compatible = "gpio-leds";
- iracibble {
+ sandbox_led_red: iracibble {
gpios = <&gpio_a 1 0>;
label = "sandbox:red";
};
- martinet {
+ sandbox_led_green: martinet {
gpios = <&gpio_a 2 0>;
label = "sandbox:green";
};
@@ -1138,13 +1147,20 @@
filename = "mmc6.img";
};
- /* This is used for Android tests */
+ /* This is used for Android boot image v4 tests */
mmc7 {
status = "disabled";
compatible = "sandbox,mmc";
filename = "mmc7.img";
};
+ /* This is used for Android boot image v2 tests. */
+ mmc8 {
+ status = "disabled";
+ compatible = "sandbox,mmc";
+ filename = "mmc8.img";
+ };
+
pch {
compatible = "sandbox,pch";
};
diff --git a/arch/x86/cpu/intel_common/cpu_from_spl.c b/arch/x86/cpu/intel_common/cpu_from_spl.c
index 5aad2ae..48b2ef2 100644
--- a/arch/x86/cpu/intel_common/cpu_from_spl.c
+++ b/arch/x86/cpu/intel_common/cpu_from_spl.c
@@ -24,7 +24,9 @@
int ret;
#if CONFIG_IS_ENABLED(HANDOFF) && IS_ENABLED(CONFIG_USE_HOB)
- gd->arch.hob_list = handoff_get();
+ struct spl_handoff *ho = gd->spl_handoff;
+
+ gd->arch.hob_list = ho->arch.hob_list;
#endif
ret = x86_cpu_reinit_f();
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index 55f5818..0f79a5d 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -49,7 +49,7 @@
* This may be useful for last-stage operations, like cancelling
* of DMA operation or releasing device internal buffers.
*/
- dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);
+ dm_remove_devices_active();
}
#if defined(CONFIG_OF_LIBFDT) && !defined(CONFIG_OF_NO_KERNEL)
diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c
index 4c4c833..75fa8f9 100644
--- a/arch/x86/lib/fsp2/fsp_dram.c
+++ b/arch/x86/lib/fsp2/fsp_dram.c
@@ -59,7 +59,7 @@
#endif
} else {
#if CONFIG_IS_ENABLED(HANDOFF)
- struct spl_handoff *ho = handoff_get();
+ struct spl_handoff *ho = gd->spl_handoff;
if (!ho) {
log_debug("No SPL handoff found\n");
@@ -82,7 +82,7 @@
return gd->ram_size;
#if CONFIG_IS_ENABLED(HANDOFF)
- struct spl_handoff *ho = handoff_get();
+ struct spl_handoff *ho = gd->spl_handoff;
log_debug("usable_ram_top = %lx\n", ho->arch.usable_ram_top);
diff --git a/board/Marvell/sheevaplug/sheevaplug.env b/board/Marvell/sheevaplug/sheevaplug.env
new file mode 100644
index 0000000..bcd62db
--- /dev/null
+++ b/board/Marvell/sheevaplug/sheevaplug.env
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2024 Tony Dinh <mibodhi@gmail.com>
+ *
+ * Environment variables configurations
+ */
+
+kernel_addr_r=0x800000
+fdt_addr_r=0x2c00000
+ramdisk_addr_r=0x01100000
+scriptaddr=0x200000
+fdtfile=CONFIG_DEFAULT_DEVICE_TREE.dtb
+mtdparts=CONFIG_MTDPARTS_DEFAULT
+console=ttyS0,115200
+
+/* Standard Boot */
+bootcmd=
+ bootflow scan -lb
+failed=
+ echo CONFIG_SYS_BOARD boot failed - please check your image
diff --git a/board/alliedtelesis/x250/MAINTAINERS b/board/alliedtelesis/x250/MAINTAINERS
new file mode 100644
index 0000000..8a74dbc
--- /dev/null
+++ b/board/alliedtelesis/x250/MAINTAINERS
@@ -0,0 +1,7 @@
+X250 BOARD
+M: Chris Packham <chris.packham@alliedtelesis.co.nz>
+S: Maintained
+F: board/alliedtelesis/x250/
+F: arch/arm/dts/cn9130-atl-x250.dts
+F: include/configs/x250.h
+F: configs/x250_defconfig
diff --git a/board/alliedtelesis/x250/Makefile b/board/alliedtelesis/x250/Makefile
new file mode 100644
index 0000000..98e0cce
--- /dev/null
+++ b/board/alliedtelesis/x250/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2024 Allied Telesis
+#
+
+obj-y += x250.o
diff --git a/board/alliedtelesis/x250/x250.c b/board/alliedtelesis/x250/x250.c
new file mode 100644
index 0000000..66c7826
--- /dev/null
+++ b/board/alliedtelesis/x250/x250.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <config.h>
+#include <asm/global_data.h>
+#include <linux/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEVICE_BUS_SYNC_CTRL 0xF27004C8
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
+
+ /* DEV_READYn is not needed for NVS, ignore it when accessing CS1 */
+ writel(0x00004001, DEVICE_BUS_SYNC_CTRL);
+
+ return 0;
+}
diff --git a/board/armltd/total_compute/MAINTAINERS b/board/armltd/total_compute/MAINTAINERS
index 3dc1cd1..92486f4 100644
--- a/board/armltd/total_compute/MAINTAINERS
+++ b/board/armltd/total_compute/MAINTAINERS
@@ -1,5 +1,5 @@
TOTAL_COMPUTE BOARD
-M: Usama Arif <usama.arif@arm.com>
+M: Ben Horgan <ben.horgan@arm.com>
S: Maintained
F: board/armltd/total_compute/
F: include/configs/total_compute.h
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index cf998096..584b545 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -16,8 +16,8 @@
select VIRTIO_BLK if VIRTIO_MMIO
select VIRTIO_NET if VIRTIO_MMIO
select DM_ETH if VIRTIO_NET
+ imply DM_RTC
imply RTC_PL031
- select DM_RTC if RTC_PL031
imply EFI_SET_TIME if DM_RTC
select LINUX_KERNEL_IMAGE_HEADER
select POSITION_INDEPENDENT
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index b85fd806..1adee9a 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -281,7 +281,7 @@
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
- bus = fec_get_miibus(base, -1);
+ bus = fec_get_miibus(NULL, base, -1);
if (!bus)
return -EINVAL;
/* scan phy 4,5,6,7 */
diff --git a/board/coreboot/coreboot/sysinfo.c b/board/coreboot/coreboot/sysinfo.c
index e0bdc7a..d6b1953 100644
--- a/board/coreboot/coreboot/sysinfo.c
+++ b/board/coreboot/coreboot/sysinfo.c
@@ -24,21 +24,21 @@
const char *str = NULL;
switch (id) {
- case SYSINFO_ID_BOARD_MODEL:
+ case SYSID_BOARD_MODEL:
if (priv->t1)
str = smbios_string(priv->system,
priv->t1->product_name);
break;
- case SYSINFO_ID_BOARD_MANUFACTURER:
+ case SYSID_BOARD_MANUFACTURER:
if (priv->t1)
str = smbios_string(priv->system,
priv->t1->manufacturer);
break;
- case SYSINFO_ID_PRIOR_STAGE_VERSION:
+ case SYSID_PRIOR_STAGE_VERSION:
if (priv->t0)
str = smbios_string(priv->bios, priv->t0->bios_ver);
break;
- case SYSINFO_ID_PRIOR_STAGE_DATE:
+ case SYSID_PRIOR_STAGE_DATE:
if (priv->t0)
str = smbios_string(priv->bios,
priv->t0->bios_release_date);
diff --git a/board/data_modul/common/common.c b/board/data_modul/common/common.c
index b5f8390..9e35dc5 100644
--- a/board/data_modul/common/common.c
+++ b/board/data_modul/common/common.c
@@ -47,6 +47,9 @@
"dmo,ram-coding-gpios",
gpio, ARRAY_SIZE(gpio),
GPIOD_IS_IN);
+ if (ret < 0)
+ return BIT(2) | BIT(0);
+
for (i = 0; i < ret; i++)
memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i;
diff --git a/board/data_modul/imx8mm_edm_sbc/spl.c b/board/data_modul/imx8mm_edm_sbc/spl.c
index 17aafd7..a9ef049 100644
--- a/board/data_modul/imx8mm_edm_sbc/spl.c
+++ b/board/data_modul/imx8mm_edm_sbc/spl.c
@@ -61,8 +61,10 @@
{
if (boot_dev_spl == MMC3_BOOT)
return BOOT_DEVICE_MMC2; /* eMMC */
- else
+ else if (boot_dev_spl == MMC2_BOOT)
return BOOT_DEVICE_MMC1; /* SD */
+ else
+ return BOOT_DEVICE_BOARD;
}
void board_boot_order(u32 *spl_boot_list)
@@ -76,7 +78,7 @@
else
spl_boot_list[1] = BOOT_DEVICE_MMC1; /* SD */
- spl_boot_list[2] = BOOT_DEVICE_UART; /* YModem */
+ spl_boot_list[2] = BOOT_DEVICE_BOARD; /* SDP */
spl_boot_list[3] = BOOT_DEVICE_NONE;
}
diff --git a/board/dhelectronics/common/dh_common.c b/board/dhelectronics/common/dh_common.c
index 32c50b4..7101080 100644
--- a/board/dhelectronics/common/dh_common.c
+++ b/board/dhelectronics/common/dh_common.c
@@ -7,9 +7,27 @@
#include <dm.h>
#include <i2c_eeprom.h>
#include <net.h>
+#include <u-boot/crc.h>
#include "dh_common.h"
+static int on_dh_som_serial_number(const char *name, const char *value, enum env_op op,
+ int flags)
+{
+ env_set("SN", value);
+ return 0;
+}
+
+U_BOOT_ENV_CALLBACK(dh_som_serial_number, on_dh_som_serial_number);
+
+static int on_SN(const char *name, const char *value, enum env_op op, int flags)
+{
+ env_set("dh_som_serial_number", value);
+ return 0;
+}
+
+U_BOOT_ENV_CALLBACK(SN, on_SN);
+
bool dh_mac_is_in_env(const char *env)
{
unsigned char enetaddr[6];
@@ -30,6 +48,149 @@
return 0;
}
+int dh_read_eeprom_id_page(u8 *eeprom_buffer, const char *alias)
+{
+ struct eeprom_id_page *eip = (struct eeprom_id_page *)eeprom_buffer;
+ struct udevice *dev;
+ size_t payload_len;
+ int eeprom_size;
+ u16 crc16_calc;
+ u16 crc16_eip;
+ u8 crc8_calc;
+ ofnode node;
+ int ret;
+
+ node = ofnode_path(alias);
+
+ ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, node, &dev);
+ if (ret)
+ return ret;
+
+ eeprom_size = i2c_eeprom_size(dev);
+ if (eeprom_size < 0) {
+ printf("%s: Error getting EEPROM ID page size! ret = %d\n", __func__, ret);
+ return eeprom_size;
+ }
+
+ if (eeprom_size == 0 || eeprom_size > DH_EEPROM_ID_PAGE_MAX_SIZE) {
+ eeprom_size = DH_EEPROM_ID_PAGE_MAX_SIZE;
+ printf("Get invalid EEPROM ID page size %d bytes! Try to read %d bytes.\n",
+ eeprom_size, DH_EEPROM_ID_PAGE_MAX_SIZE);
+ }
+
+ ret = i2c_eeprom_read(dev, 0x0, eeprom_buffer, eeprom_size);
+ if (ret) {
+ printf("%s: Error reading EEPROM ID page! ret = %d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Validate header ID */
+ if (eip->hdr.id[0] != 'D' || eip->hdr.id[1] != 'H' || eip->hdr.id[2] != 'E') {
+ printf("%s: Error validating header ID! (got %c%c%c (0x%02x 0x%02x 0x%02x) != expected DHE)\n",
+ __func__, isprint(eip->hdr.id[0]) ? eip->hdr.id[0] : '.',
+ isprint(eip->hdr.id[1]) ? eip->hdr.id[1] : '.',
+ isprint(eip->hdr.id[2]) ? eip->hdr.id[2] : '.',
+ eip->hdr.id[0], eip->hdr.id[1], eip->hdr.id[2]);
+ return -EINVAL;
+ }
+
+ /* Validate header checksum */
+ crc8_calc = crc8(0xff, eeprom_buffer, offsetof(struct eeprom_id_page, hdr.crc8_hdr));
+ if (eip->hdr.crc8_hdr != crc8_calc) {
+ printf("%s: Error validating header checksum! (got 0x%02x != calc 0x%02x)\n",
+ __func__, eip->hdr.crc8_hdr, crc8_calc);
+ return -EINVAL;
+ }
+
+ /*
+ * Validate header version
+ * The payload is defined by the version specified in the header.
+ * Currently only version 0x10 is defined, so take the length of
+ * the only defined payload as the payload length.
+ */
+ if (eip->hdr.version != DH_EEPROM_ID_PAGE_V1_0) {
+ printf("%s: Error validating version! (0x%02X is not supported)\n",
+ __func__, eip->hdr.version);
+ return -EINVAL;
+ }
+ payload_len = sizeof(eip->pl);
+
+ /* Validate payload checksum */
+ crc16_eip = (eip->hdr.crc16_pl[1] << 8) | eip->hdr.crc16_pl[0];
+ crc16_calc = crc16(0xffff, eeprom_buffer + sizeof(eip->hdr), payload_len);
+ if (crc16_eip != crc16_calc) {
+ printf("%s: Error validating data checksum! (got 0x%02x != calc 0x%02x)\n",
+ __func__, crc16_eip, crc16_calc);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int dh_get_value_from_eeprom_buffer(enum eip_request_values request, u8 *data, int data_len,
+ struct eeprom_id_page *eip)
+{
+ const char fin_chr = (eip->pl.item_prefix & DH_ITEM_PREFIX_FIN_BIT) ?
+ DH_ITEM_PREFIX_FIN_FLASHED_CHR : DH_ITEM_PREFIX_FIN_HALF_CHR;
+ const u8 soc_coded = eip->pl.item_prefix & 0xf;
+ char soc_chr;
+
+ if (!eip)
+ return -EINVAL;
+
+ /* Copy requested data */
+ switch (request) {
+ case DH_MAC0:
+ if (!is_valid_ethaddr(eip->pl.mac0))
+ return -EINVAL;
+
+ if (data_len >= sizeof(eip->pl.mac0))
+ memcpy(data, eip->pl.mac0, sizeof(eip->pl.mac0));
+ else
+ return -EINVAL;
+ break;
+ case DH_MAC1:
+ if (!is_valid_ethaddr(eip->pl.mac1))
+ return -EINVAL;
+
+ if (data_len >= sizeof(eip->pl.mac1))
+ memcpy(data, eip->pl.mac1, sizeof(eip->pl.mac1));
+ else
+ return -EINVAL;
+ break;
+ case DH_ITEM_NUMBER:
+ if (data_len < 8) /* String length must be 7 characters + string termination */
+ return -EINVAL;
+
+ if (soc_coded == DH_ITEM_PREFIX_NXP)
+ soc_chr = DH_ITEM_PREFIX_NXP_CHR;
+ else if (soc_coded == DH_ITEM_PREFIX_ST)
+ soc_chr = DH_ITEM_PREFIX_ST_CHR;
+ else
+ return -EINVAL;
+
+ snprintf(data, data_len, "%c%c%05d", fin_chr, soc_chr,
+ (eip->pl.item_num[0] << 16) | (eip->pl.item_num[1] << 8) |
+ eip->pl.item_num[2]);
+ break;
+ case DH_SERIAL_NUMBER:
+ /*
+ * data_len must be greater than the size of eip->pl.serial,
+ * because there is a string termination needed.
+ */
+ if (data_len <= sizeof(eip->pl.serial))
+ return -EINVAL;
+
+ data[sizeof(eip->pl.serial)] = 0;
+ memcpy(data, eip->pl.serial, sizeof(eip->pl.serial));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int dh_get_mac_from_eeprom(unsigned char *enetaddr, const char *alias)
{
struct udevice *dev;
@@ -62,7 +223,7 @@
return 0;
}
-__weak int dh_setup_mac_address(void)
+__weak int dh_setup_mac_address(struct eeprom_id_page *eip)
{
unsigned char enetaddr[6];
@@ -72,6 +233,9 @@
if (dh_get_mac_is_enabled("ethernet0"))
return 0;
+ if (!dh_get_value_from_eeprom_buffer(DH_MAC0, enetaddr, sizeof(enetaddr), eip))
+ return eth_env_set_enetaddr("ethaddr", enetaddr);
+
if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0"))
return eth_env_set_enetaddr("ethaddr", enetaddr);
diff --git a/board/dhelectronics/common/dh_common.h b/board/dhelectronics/common/dh_common.h
index a2de5b1..c4693c6 100644
--- a/board/dhelectronics/common/dh_common.h
+++ b/board/dhelectronics/common/dh_common.h
@@ -3,6 +3,52 @@
* Copyright 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
*/
+#define DH_EEPROM_ID_PAGE_MAX_SIZE 64
+
+enum eip_request_values {
+ DH_MAC0,
+ DH_MAC1,
+ DH_ITEM_NUMBER,
+ DH_SERIAL_NUMBER,
+};
+
+/* DH item: Vendor coding */
+#define DH_ITEM_PREFIX_NXP 0x01
+#define DH_ITEM_PREFIX_NXP_CHR 'I'
+#define DH_ITEM_PREFIX_ST 0x02
+#define DH_ITEM_PREFIX_ST_CHR 'S'
+
+/*
+ * DH item: Finished state coding
+ * Bit = 0 means half finished
+ * Prefix is 'H'
+ * Bit = 1 means finished with a customer image flashed
+ * Prefix is 'F'
+ */
+#define DH_ITEM_PREFIX_FIN_BIT BIT(7)
+#define DH_ITEM_PREFIX_FIN_HALF_CHR 'H'
+#define DH_ITEM_PREFIX_FIN_FLASHED_CHR 'F'
+
+struct eeprom_id_page {
+ /* Header */
+ struct {
+ u8 id[3]; /* Identifier 'D', 'H', 'E' - 'D' is at index 0 */
+ u8 version; /* 0x10 -- Version 1.0 */
+ u8 crc16_pl[2]; /* Checksum payload, [1] is MSbyte */
+ u8 crc8_hdr; /* Checksum header */
+ } hdr;
+ /* Payload */
+ struct {
+ u8 mac0[6];
+ u8 mac1[6];
+ u8 item_prefix; /* H/F is coded in MSbits, Vendor coding starts at LSbits */
+ u8 item_num[3]; /* [2] is MSbyte */
+ u8 serial[9]; /* [8] is MSbyte */
+ } pl;
+};
+
+#define DH_EEPROM_ID_PAGE_V1_0 0x10
+
/*
* dh_mac_is_in_env - Check if MAC address is already set
*
@@ -29,8 +75,39 @@
int dh_get_mac_from_eeprom(unsigned char *enetaddr, const char *alias);
/*
+ * dh_read_eeprom_id_page() - Read EEPROM ID page content into given buffer
+ * @eeprom_buffer: Buffer for EEPROM ID page content
+ * @alias: Alias for EEPROM ID page device tree node
+ *
+ * Read the content of the EEPROM ID page into the given buffer (parameter
+ * eeprom_buffer). The EEPROM ID page device is selected via alias device
+ * tree name (parameter alias). The data of the EEPROM ID page is verified.
+ * An error is returned for reading failures and invalid data.
+ *
+ * Return: 0 if OK, other value on error
+ */
+int dh_read_eeprom_id_page(u8 *eeprom_buffer, const char *alias);
+
+/*
+ * dh_get_value_from_eeprom_buffer() - Get value from EEPROM buffer
+ * @eip_request_values: Requested value as enum
+ * @data: Buffer where value is to be stored
+ * @data_len: Length of the value buffer
+ * @eip: Pointer to EEPROM ID page struct from which the data is parsed
+ *
+ * Gets the value specified by the parameter eip_request_values from the EEPROM
+ * data struct (parameter eip). The data is written to the specified data
+ * buffer (parameter data). If the length of the data (parameter data_len) is
+ * not sufficient to copy the data into the buffer, an error is returned.
+ *
+ * Return: 0 if OK, other value on error
+ */
+int dh_get_value_from_eeprom_buffer(enum eip_request_values request, u8 *data, int data_len,
+ struct eeprom_id_page *eip);
+
+/*
* dh_setup_mac_address - Try to get MAC address from various locations and write it to env
*
* Return: 0 if OK, other value on error
*/
-int dh_setup_mac_address(void);
+int dh_setup_mac_address(struct eeprom_id_page *eip);
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index f2b14bf..234824b 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -84,7 +84,7 @@
}
#endif
-int dh_setup_mac_address(void)
+int dh_setup_mac_address(struct eeprom_id_page *eip)
{
unsigned char enetaddr[6];
@@ -171,7 +171,7 @@
u32 hw_code;
char buf[16];
- dh_setup_mac_address();
+ dh_setup_mac_address(NULL);
hw_code = board_get_hwcode();
diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
index 78aae41..4af3cbe 100644
--- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
+++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
@@ -40,7 +40,7 @@
return 0;
}
-static int dh_imx8_setup_ethaddr(void)
+static int dh_imx8_setup_ethaddr(struct eeprom_id_page *eip)
{
unsigned char enetaddr[6];
@@ -53,6 +53,9 @@
if (!dh_imx_get_mac_from_fuse(enetaddr))
goto out;
+ if (!dh_get_value_from_eeprom_buffer(DH_MAC0, enetaddr, sizeof(enetaddr), eip))
+ goto out;
+
if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0"))
goto out;
@@ -62,7 +65,7 @@
return eth_env_set_enetaddr("ethaddr", enetaddr);
}
-static int dh_imx8_setup_eth1addr(void)
+static int dh_imx8_setup_eth1addr(struct eeprom_id_page *eip)
{
unsigned char enetaddr[6];
@@ -75,6 +78,9 @@
if (!dh_imx_get_mac_from_fuse(enetaddr))
goto increment_out;
+ if (!dh_get_value_from_eeprom_buffer(DH_MAC1, enetaddr, sizeof(enetaddr), eip))
+ goto out;
+
if (!dh_get_mac_from_eeprom(enetaddr, "eeprom1"))
goto out;
@@ -95,21 +101,58 @@
return eth_env_set_enetaddr("eth1addr", enetaddr);
}
-int dh_setup_mac_address(void)
+int dh_setup_mac_address(struct eeprom_id_page *eip)
{
int ret;
- ret = dh_imx8_setup_ethaddr();
+ ret = dh_imx8_setup_ethaddr(eip);
if (ret)
printf("%s: Unable to setup ethaddr! ret = %d\n", __func__, ret);
- ret = dh_imx8_setup_eth1addr();
+ ret = dh_imx8_setup_eth1addr(eip);
if (ret)
printf("%s: Unable to setup eth1addr! ret = %d\n", __func__, ret);
return ret;
}
+void dh_add_item_number_and_serial_to_env(struct eeprom_id_page *eip)
+{
+ char *item_number_env;
+ char item_number[8]; /* String with 7 characters + string termination */
+ char *serial_env;
+ char serial[10]; /* String with 9 characters + string termination */
+ int ret;
+
+ ret = dh_get_value_from_eeprom_buffer(DH_ITEM_NUMBER, item_number, sizeof(item_number),
+ eip);
+ if (ret) {
+ printf("%s: Unable to get DHSOM item number from EEPROM ID page! ret = %d\n",
+ __func__, ret);
+ } else {
+ item_number_env = env_get("dh_som_item_number");
+ if (!item_number_env)
+ env_set("dh_som_item_number", item_number);
+ else if (strcmp(item_number_env, item_number))
+ printf("Warning: Environment dh_som_item_number differs from EEPROM ID page value (%s != %s)\n",
+ item_number_env, item_number);
+ }
+
+ ret = dh_get_value_from_eeprom_buffer(DH_SERIAL_NUMBER, serial, sizeof(serial),
+ eip);
+ if (ret) {
+ printf("%s: Unable to get DHSOM serial number from EEPROM ID page! ret = %d\n",
+ __func__, ret);
+ } else {
+ serial_env = env_get("dh_som_serial_number");
+ if (!serial_env)
+ env_set("dh_som_serial_number", serial);
+ else if (strcmp(serial_env, serial))
+ printf("Warning: Environment dh_som_serial_number differs from EEPROM ID page value (%s != %s)\n",
+ serial_env, serial);
+ }
+}
+
int board_init(void)
{
return 0;
@@ -117,7 +160,27 @@
int board_late_init(void)
{
- dh_setup_mac_address();
+ u8 eeprom_buffer[DH_EEPROM_ID_PAGE_MAX_SIZE] = { 0 };
+ struct eeprom_id_page *eip = (struct eeprom_id_page *)eeprom_buffer;
+ int ret;
+
+ ret = dh_read_eeprom_id_page(eeprom_buffer, "eeprom0wl");
+ if (ret) {
+ /*
+ * The EEPROM ID page is available on SoM rev. 200 and greater.
+ * For SoM rev. 100 the return value will be -ENODEV. Suppress
+ * the error message for that, because the absence cannot be
+ * treated as an error.
+ */
+ if (ret != -ENODEV)
+ printf("%s: Cannot read valid data from EEPROM ID page! ret = %d\n",
+ __func__, ret);
+ dh_setup_mac_address(NULL);
+ } else {
+ dh_setup_mac_address(eip);
+ dh_add_item_number_and_serial_to_env(eip);
+ }
+
return 0;
}
diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
index 6095cb0..e0e18b4 100644
--- a/board/emulation/qemu-arm/qemu-arm.c
+++ b/board/emulation/qemu-arm/qemu-arm.c
@@ -48,7 +48,7 @@
};
struct efi_capsule_update_info update_info = {
- .num_images = ARRAY_SIZE(fw_images)
+ .num_images = ARRAY_SIZE(fw_images),
.images = fw_images,
};
diff --git a/board/freescale/imx91_evk/Kconfig b/board/freescale/imx91_evk/Kconfig
new file mode 100644
index 0000000..caaa82b
--- /dev/null
+++ b/board/freescale/imx91_evk/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_IMX91_11X11_EVK
+
+config SYS_BOARD
+ default "imx91_evk"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "imx91_evk"
+
+config IMX91_EVK_LPDDR4
+ bool "Using LPDDR4 Timing and PMIC voltage"
+ default y
+ select IMX9_LPDDR4X
+ help
+ Select the LPDDR4 timing and 1.1V VDDQ
+
+endif
diff --git a/board/freescale/imx91_evk/MAINTAINERS b/board/freescale/imx91_evk/MAINTAINERS
new file mode 100644
index 0000000..f7d39bf
--- /dev/null
+++ b/board/freescale/imx91_evk/MAINTAINERS
@@ -0,0 +1,7 @@
+i.MX91 11x11 EVK BOARD
+M: Peng Fan <peng.fan@nxp.com>
+S: Maintained
+F: board/freescale/imx91_evk/
+F: include/configs/imx91_evk.h
+F: configs/imx91_11x11_evk_defconfig
+F: configs/imx91_11x11_evk_inline_ecc_defconfig
diff --git a/board/freescale/imx91_evk/Makefile b/board/freescale/imx91_evk/Makefile
new file mode 100644
index 0000000..a96228a
--- /dev/null
+++ b/board/freescale/imx91_evk/Makefile
@@ -0,0 +1,16 @@
+#
+# Copyright 2024 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += imx91_evk.o
+
+ifdef CONFIG_XPL_BUILD
+obj-y += spl.o
+ifdef CONFIG_IMX9_DRAM_INLINE_ECC
+obj-$(CONFIG_IMX91_EVK_LPDDR4) += lpddr4_timing_2400mts_ecc.o lpddr4_timing_1600mts_ecc.o
+else
+obj-$(CONFIG_IMX91_EVK_LPDDR4) += lpddr4_timing_2400mts.o lpddr4_timing_1600mts.o
+endif
+endif
diff --git a/board/freescale/imx91_evk/imx91_evk.c b/board/freescale/imx91_evk/imx91_evk.c
new file mode 100644
index 0000000..83bfca2
--- /dev/null
+++ b/board/freescale/imx91_evk/imx91_evk.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <env.h>
+#include <init.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/sys_proto.h>
+
+int board_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_IS_IN_MMC
+ board_late_mmc_env_init();
+#endif
+
+ env_set("sec_boot", "no");
+#ifdef CONFIG_AHAB_BOOT
+ env_set("sec_boot", "yes");
+#endif
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ env_set("board_name", "11X11_EVK");
+ env_set("board_rev", "iMX93");
+#endif
+ return 0;
+}
diff --git a/board/freescale/imx91_evk/imx91_evk.env b/board/freescale/imx91_evk/imx91_evk.env
new file mode 100644
index 0000000..92486c6
--- /dev/null
+++ b/board/freescale/imx91_evk/imx91_evk.env
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+boot_targets=mmc0 mmc1
+boot_fit=no
+bootm_size=0x10000000
+cntr_addr=0x98000000
+cntr_file=os_cntr_signed.bin
+console=ttyLP0,115200 earlycon
+fdt_addr_r=0x83000000
+fdt_addr=0x83000000
+fdtfile=CONFIG_DEFAULT_FDT_FILE
+image=Image
+mmcpart=1
+mmcroot=/dev/mmcblk1p2 rootwait rw
+mmcautodetect=yes
+mmcargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=${mmcroot}
+prepare_mcore=setenv mcore_clk clk-imx93.mcore_booted
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
+loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}
+auth_os=auth_cntr ${cntr_addr}
+boot_os=booti ${loadaddr} - ${fdt_addr_r}
+mmcboot=
+ echo Booting from mmc ...;
+ run mmcargs;
+ if test ${sec_boot} = yes; then
+ if run auth_os; then
+ run boot_os;
+ else
+ echo ERR: failed to authenticate;
+ fi;
+ else
+ if run loadfdt; then
+ run boot_os;
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+ fi;
+netargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=/dev/nfs
+ ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=
+ echo Booting from net ...;
+ run netargs;
+ if test ${ip_dyn} = yes; then
+ setenv get_cmd dhcp;
+ else
+ setenv get_cmd tftp;
+ fi;
+ if test ${sec_boot} = yes; then
+ ${get_cmd} ${cntr_addr} ${cntr_file};
+ if run auth_os; then
+ run boot_os;
+ else
+ echo ERR: failed to authenticate;
+ fi;
+ else
+ ${get_cmd} ${loadaddr} ${image};
+ if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
+ run boot_os;
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+ fi;
diff --git a/board/freescale/imx91_evk/lpddr4_timing_1600mts.c b/board/freescale/imx91_evk/lpddr4_timing_1600mts.c
new file mode 100644
index 0000000..45e19da
--- /dev/null
+++ b/board/freescale/imx91_evk/lpddr4_timing_1600mts.c
@@ -0,0 +1,1995 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2024 NXP
+ *
+ * Code generated with DDR Tool v3.3.0_1.9-d1cdb7d3.
+ * DDR PHY FW2022.01
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+/* Initialize DDRC registers */
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+ {0x4e300110, 0x44100001},
+ {0x4e300000, 0x8000ff},
+ {0x4e300008, 0x0},
+ {0x4e300080, 0x80000512},
+ {0x4e300084, 0x0},
+ {0x4e300114, 0x1002},
+ {0x4e300260, 0x80},
+ {0x4e300f04, 0x80},
+ {0x4e300800, 0x43b30002},
+ {0x4e300804, 0x1f1f1f1f},
+ {0x4e301000, 0x0},
+ {0x4e301240, 0x0},
+ {0x4e301244, 0x0},
+ {0x4e301248, 0x0},
+ {0x4e30124c, 0x0},
+ {0x4e301250, 0x0},
+ {0x4e301254, 0x0},
+ {0x4e301258, 0x0},
+ {0x4e30125c, 0x0},
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+ {
+ {
+ {0x4e300100, 0x02121100},
+ {0x4e300104, 0xF866000C},
+ {0x4e300108, 0xF2FA8088},
+ {0x4e30010C, 0x0061E1A0},
+ {0x4e300124, 0x0C340000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30700000},
+ {0x4e300170, 0x8A0A0508},
+ {0x4e300250, 0x00000011},
+ {0x4e300254, 0x00900090},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ {0x4e300300, 0x0F220F09},
+ {0x4e300304, 0x00901008},
+ {0x4e300308, 0x063C061A},
+ },
+ {
+ {0x01, 0xA4},
+ {0x02, 0x52},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00091000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x81820A48},
+ {0x4e30010C, 0x00310110},
+ {0x4e300124, 0x061A0000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30100000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000009},
+ {0x4e300254, 0x00440044},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00061000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x6E62FA48},
+ {0x4e30010C, 0x0031010D},
+ {0x4e300124, 0x04C50000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30000000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000007},
+ {0x4e300254, 0x00340034},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 1,
+ },
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+ {0x100a0, 0x4},
+ {0x100a1, 0x5},
+ {0x100a2, 0x6},
+ {0x100a3, 0x7},
+ {0x100a4, 0x0},
+ {0x100a5, 0x1},
+ {0x100a6, 0x2},
+ {0x100a7, 0x3},
+ {0x110a0, 0x3},
+ {0x110a1, 0x2},
+ {0x110a2, 0x0},
+ {0x110a3, 0x1},
+ {0x110a4, 0x7},
+ {0x110a5, 0x6},
+ {0x110a6, 0x4},
+ {0x110a7, 0x5},
+ {0x1005f, 0x1ff},
+ {0x1015f, 0x1ff},
+ {0x1105f, 0x1ff},
+ {0x1115f, 0x1ff},
+ {0x11005f, 0x1ff},
+ {0x11015f, 0x1ff},
+ {0x11105f, 0x1ff},
+ {0x11115f, 0x1ff},
+ {0x21005f, 0x1ff},
+ {0x21015f, 0x1ff},
+ {0x21105f, 0x1ff},
+ {0x21115f, 0x1ff},
+ {0x55, 0x1ff},
+ {0x1055, 0x1ff},
+ {0x2055, 0x1ff},
+ {0x200c5, 0xb},
+ {0x1200c5, 0x3},
+ {0x2200c5, 0x7},
+ {0x2002e, 0x1},
+ {0x12002e, 0x1},
+ {0x22002e, 0x2},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x2007d, 0x212},
+ {0x2007c, 0x61},
+ {0x120024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x12007d, 0x212},
+ {0x12007c, 0x61},
+ {0x220024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x22007d, 0x212},
+ {0x22007c, 0x61},
+ {0x20056, 0x3},
+ {0x120056, 0x3},
+ {0x220056, 0x3},
+ {0x1004d, 0x600},
+ {0x1014d, 0x600},
+ {0x1104d, 0x600},
+ {0x1114d, 0x600},
+ {0x11004d, 0x600},
+ {0x11014d, 0x600},
+ {0x11104d, 0x600},
+ {0x11114d, 0x600},
+ {0x21004d, 0x600},
+ {0x21014d, 0x600},
+ {0x21104d, 0x600},
+ {0x21114d, 0x600},
+ {0x10049, 0xe3f},
+ {0x10149, 0xe3f},
+ {0x11049, 0xe3f},
+ {0x11149, 0xe3f},
+ {0x110049, 0xe3f},
+ {0x110149, 0xe3f},
+ {0x111049, 0xe3f},
+ {0x111149, 0xe3f},
+ {0x210049, 0xe3f},
+ {0x210149, 0xe3f},
+ {0x211049, 0xe3f},
+ {0x211149, 0xe3f},
+ {0x43, 0x7f},
+ {0x1043, 0x7f},
+ {0x2043, 0x7f},
+ {0x20018, 0x1},
+ {0x20075, 0x4},
+ {0x20050, 0x11},
+ {0x2009b, 0x2},
+ {0x20008, 0x190},
+ {0x120008, 0xc8},
+ {0x220008, 0x9c},
+ {0x20088, 0x9},
+ {0x200b2, 0x10c},
+ {0x10043, 0x5a1},
+ {0x10143, 0x5a1},
+ {0x11043, 0x5a1},
+ {0x11143, 0x5a1},
+ {0x1200b2, 0x10c},
+ {0x110043, 0x5a1},
+ {0x110143, 0x5a1},
+ {0x111043, 0x5a1},
+ {0x111143, 0x5a1},
+ {0x2200b2, 0x10c},
+ {0x210043, 0x5a1},
+ {0x210143, 0x5a1},
+ {0x211043, 0x5a1},
+ {0x211143, 0x5a1},
+ {0x200fa, 0x2},
+ {0x1200fa, 0x2},
+ {0x2200fa, 0x2},
+ {0x20019, 0x1},
+ {0x120019, 0x1},
+ {0x220019, 0x1},
+ {0x200f0, 0x600},
+ {0x200f1, 0x0},
+ {0x200f2, 0x4444},
+ {0x200f3, 0x8888},
+ {0x200f4, 0x5655},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0xf000},
+ {0x1004a, 0x500},
+ {0x1104a, 0x500},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0x20021, 0x0},
+ {0x200c7, 0x21},
+ {0x1200c7, 0x41},
+ {0x200ca, 0x24},
+ {0x1200ca, 0x24},
+};
+
+/* PHY trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+ {0x1005f, 0x0},
+ {0x1015f, 0x0},
+ {0x1105f, 0x0},
+ {0x1115f, 0x0},
+ {0x11005f, 0x0},
+ {0x11015f, 0x0},
+ {0x11105f, 0x0},
+ {0x11115f, 0x0},
+ {0x21005f, 0x0},
+ {0x21015f, 0x0},
+ {0x21105f, 0x0},
+ {0x21115f, 0x0},
+ {0x55, 0x0},
+ {0x1055, 0x0},
+ {0x2055, 0x0},
+ {0x200c5, 0x0},
+ {0x1200c5, 0x0},
+ {0x2200c5, 0x0},
+ {0x2002e, 0x0},
+ {0x12002e, 0x0},
+ {0x22002e, 0x0},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x0},
+ {0x2003a, 0x0},
+ {0x2007d, 0x0},
+ {0x2007c, 0x0},
+ {0x120024, 0x0},
+ {0x12007d, 0x0},
+ {0x12007c, 0x0},
+ {0x220024, 0x0},
+ {0x22007d, 0x0},
+ {0x22007c, 0x0},
+ {0x20056, 0x0},
+ {0x120056, 0x0},
+ {0x220056, 0x0},
+ {0x1004d, 0x0},
+ {0x1014d, 0x0},
+ {0x1104d, 0x0},
+ {0x1114d, 0x0},
+ {0x11004d, 0x0},
+ {0x11014d, 0x0},
+ {0x11104d, 0x0},
+ {0x11114d, 0x0},
+ {0x21004d, 0x0},
+ {0x21014d, 0x0},
+ {0x21104d, 0x0},
+ {0x21114d, 0x0},
+ {0x10049, 0x0},
+ {0x10149, 0x0},
+ {0x11049, 0x0},
+ {0x11149, 0x0},
+ {0x110049, 0x0},
+ {0x110149, 0x0},
+ {0x111049, 0x0},
+ {0x111149, 0x0},
+ {0x210049, 0x0},
+ {0x210149, 0x0},
+ {0x211049, 0x0},
+ {0x211149, 0x0},
+ {0x43, 0x0},
+ {0x1043, 0x0},
+ {0x2043, 0x0},
+ {0x20018, 0x0},
+ {0x20075, 0x0},
+ {0x20050, 0x0},
+ {0x2009b, 0x0},
+ {0x20008, 0x0},
+ {0x120008, 0x0},
+ {0x220008, 0x0},
+ {0x20088, 0x0},
+ {0x200b2, 0x0},
+ {0x10043, 0x0},
+ {0x10143, 0x0},
+ {0x11043, 0x0},
+ {0x11143, 0x0},
+ {0x1200b2, 0x0},
+ {0x110043, 0x0},
+ {0x110143, 0x0},
+ {0x111043, 0x0},
+ {0x111143, 0x0},
+ {0x2200b2, 0x0},
+ {0x210043, 0x0},
+ {0x210143, 0x0},
+ {0x211043, 0x0},
+ {0x211143, 0x0},
+ {0x200fa, 0x0},
+ {0x1200fa, 0x0},
+ {0x2200fa, 0x0},
+ {0x20019, 0x0},
+ {0x120019, 0x0},
+ {0x220019, 0x0},
+ {0x200f0, 0x0},
+ {0x200f1, 0x0},
+ {0x200f2, 0x0},
+ {0x200f3, 0x0},
+ {0x200f4, 0x0},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0x0},
+ {0x1004a, 0x0},
+ {0x1104a, 0x0},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0xd0000, 0x0},
+ {0x90000, 0x0},
+ {0x90001, 0x0},
+ {0x90002, 0x0},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x0},
+ {0x90029, 0x0},
+ {0x9002a, 0x0},
+ {0x9002b, 0x0},
+ {0x9002c, 0x0},
+ {0x9002d, 0x0},
+ {0x9002e, 0x0},
+ {0x9002f, 0x0},
+ {0x90030, 0x0},
+ {0x90031, 0x0},
+ {0x90032, 0x0},
+ {0x90033, 0x0},
+ {0x90034, 0x0},
+ {0x90035, 0x0},
+ {0x90036, 0x0},
+ {0x90037, 0x0},
+ {0x90038, 0x0},
+ {0x90039, 0x0},
+ {0x9003a, 0x0},
+ {0x9003b, 0x0},
+ {0x9003c, 0x0},
+ {0x9003d, 0x0},
+ {0x9003e, 0x0},
+ {0x9003f, 0x0},
+ {0x90040, 0x0},
+ {0x90041, 0x0},
+ {0x90042, 0x0},
+ {0x90043, 0x0},
+ {0x90044, 0x0},
+ {0x90045, 0x0},
+ {0x90046, 0x0},
+ {0x90047, 0x0},
+ {0x90048, 0x0},
+ {0x90049, 0x0},
+ {0x9004a, 0x0},
+ {0x9004b, 0x0},
+ {0x9004c, 0x0},
+ {0x9004d, 0x0},
+ {0x9004e, 0x0},
+ {0x9004f, 0x0},
+ {0x90050, 0x0},
+ {0x90051, 0x0},
+ {0x90052, 0x0},
+ {0x90053, 0x0},
+ {0x90054, 0x0},
+ {0x90055, 0x0},
+ {0x90056, 0x0},
+ {0x90057, 0x0},
+ {0x90058, 0x0},
+ {0x90059, 0x0},
+ {0x9005a, 0x0},
+ {0x9005b, 0x0},
+ {0x9005c, 0x0},
+ {0x9005d, 0x0},
+ {0x9005e, 0x0},
+ {0x9005f, 0x0},
+ {0x90060, 0x0},
+ {0x90061, 0x0},
+ {0x90062, 0x0},
+ {0x90063, 0x0},
+ {0x90064, 0x0},
+ {0x90065, 0x0},
+ {0x90066, 0x0},
+ {0x90067, 0x0},
+ {0x90068, 0x0},
+ {0x90069, 0x0},
+ {0x9006a, 0x0},
+ {0x9006b, 0x0},
+ {0x9006c, 0x0},
+ {0x9006d, 0x0},
+ {0x9006e, 0x0},
+ {0x9006f, 0x0},
+ {0x90070, 0x0},
+ {0x90071, 0x0},
+ {0x90072, 0x0},
+ {0x90073, 0x0},
+ {0x90074, 0x0},
+ {0x90075, 0x0},
+ {0x90076, 0x0},
+ {0x90077, 0x0},
+ {0x90078, 0x0},
+ {0x90079, 0x0},
+ {0x9007a, 0x0},
+ {0x9007b, 0x0},
+ {0x9007c, 0x0},
+ {0x9007d, 0x0},
+ {0x9007e, 0x0},
+ {0x9007f, 0x0},
+ {0x90080, 0x0},
+ {0x90081, 0x0},
+ {0x90082, 0x0},
+ {0x90083, 0x0},
+ {0x90084, 0x0},
+ {0x90085, 0x0},
+ {0x90086, 0x0},
+ {0x90087, 0x0},
+ {0x90088, 0x0},
+ {0x90089, 0x0},
+ {0x9008a, 0x0},
+ {0x9008b, 0x0},
+ {0x9008c, 0x0},
+ {0x9008d, 0x0},
+ {0x9008e, 0x0},
+ {0x9008f, 0x0},
+ {0x90090, 0x0},
+ {0x90091, 0x0},
+ {0x90092, 0x0},
+ {0x90093, 0x0},
+ {0x90094, 0x0},
+ {0x90095, 0x0},
+ {0x90096, 0x0},
+ {0x90097, 0x0},
+ {0x90098, 0x0},
+ {0x90099, 0x0},
+ {0x9009a, 0x0},
+ {0x9009b, 0x0},
+ {0x9009c, 0x0},
+ {0x9009d, 0x0},
+ {0x9009e, 0x0},
+ {0x9009f, 0x0},
+ {0x900a0, 0x0},
+ {0x900a1, 0x0},
+ {0x900a2, 0x0},
+ {0x900a3, 0x0},
+ {0x900a4, 0x0},
+ {0x900a5, 0x0},
+ {0x900a6, 0x0},
+ {0x900a7, 0x0},
+ {0x900a8, 0x0},
+ {0x900a9, 0x0},
+ {0x40000, 0x0},
+ {0x40020, 0x0},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x0},
+ {0x40021, 0x0},
+ {0x40041, 0x0},
+ {0x40061, 0x0},
+ {0x40002, 0x0},
+ {0x40022, 0x0},
+ {0x40042, 0x0},
+ {0x40062, 0x0},
+ {0x40003, 0x0},
+ {0x40023, 0x0},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x0},
+ {0x40024, 0x0},
+ {0x40044, 0x0},
+ {0x40064, 0x0},
+ {0x40005, 0x0},
+ {0x40025, 0x0},
+ {0x40045, 0x0},
+ {0x40065, 0x0},
+ {0x40006, 0x0},
+ {0x40026, 0x0},
+ {0x40046, 0x0},
+ {0x40066, 0x0},
+ {0x40007, 0x0},
+ {0x40027, 0x0},
+ {0x40047, 0x0},
+ {0x40067, 0x0},
+ {0x40008, 0x0},
+ {0x40028, 0x0},
+ {0x40048, 0x0},
+ {0x40068, 0x0},
+ {0x40009, 0x0},
+ {0x40029, 0x0},
+ {0x40049, 0x0},
+ {0x40069, 0x0},
+ {0x4000a, 0x0},
+ {0x4002a, 0x0},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x0},
+ {0x4002b, 0x0},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x0},
+ {0x4002c, 0x0},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0x0},
+ {0x4002d, 0x0},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x0},
+ {0x4002e, 0x0},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x0},
+ {0x4002f, 0x0},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x0},
+ {0x40030, 0x0},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x0},
+ {0x40031, 0x0},
+ {0x40051, 0x0},
+ {0x40071, 0x0},
+ {0x40012, 0x0},
+ {0x40032, 0x0},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x0},
+ {0x40033, 0x0},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x0},
+ {0x40034, 0x0},
+ {0x40054, 0x0},
+ {0x40074, 0x0},
+ {0x40015, 0x0},
+ {0x40035, 0x0},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x0},
+ {0x40036, 0x0},
+ {0x40056, 0x0},
+ {0x40076, 0x0},
+ {0x40017, 0x0},
+ {0x40037, 0x0},
+ {0x40057, 0x0},
+ {0x40077, 0x0},
+ {0x40018, 0x0},
+ {0x40038, 0x0},
+ {0x40058, 0x0},
+ {0x40078, 0x0},
+ {0x40019, 0x0},
+ {0x40039, 0x0},
+ {0x40059, 0x0},
+ {0x40079, 0x0},
+ {0x4001a, 0x0},
+ {0x4003a, 0x0},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x0},
+ {0x900ac, 0x0},
+ {0x900ad, 0x0},
+ {0x900ae, 0x0},
+ {0x900af, 0x0},
+ {0x900b0, 0x0},
+ {0x900b1, 0x0},
+ {0x900b2, 0x0},
+ {0x900b3, 0x0},
+ {0x900b4, 0x0},
+ {0x900b5, 0x0},
+ {0x900b6, 0x0},
+ {0x900b7, 0x0},
+ {0x900b8, 0x0},
+ {0x900b9, 0x0},
+ {0x900ba, 0x0},
+ {0x900bb, 0x0},
+ {0x900bc, 0x0},
+ {0x900bd, 0x0},
+ {0x900be, 0x0},
+ {0x900bf, 0x0},
+ {0x900c0, 0x0},
+ {0x900c1, 0x0},
+ {0x900c2, 0x0},
+ {0x900c3, 0x0},
+ {0x900c4, 0x0},
+ {0x900c5, 0x0},
+ {0x900c6, 0x0},
+ {0x900c7, 0x0},
+ {0x900c8, 0x0},
+ {0x900c9, 0x0},
+ {0x900ca, 0x0},
+ {0x900cb, 0x0},
+ {0x900cc, 0x0},
+ {0x900cd, 0x0},
+ {0x900ce, 0x0},
+ {0x900cf, 0x0},
+ {0x900d0, 0x0},
+ {0x900d1, 0x0},
+ {0x900d2, 0x0},
+ {0x900d3, 0x0},
+ {0x900d4, 0x0},
+ {0x900d5, 0x0},
+ {0x900d6, 0x0},
+ {0x900d7, 0x0},
+ {0x900d8, 0x0},
+ {0x900d9, 0x0},
+ {0x900da, 0x0},
+ {0x900db, 0x0},
+ {0x900dc, 0x0},
+ {0x900dd, 0x0},
+ {0x900de, 0x0},
+ {0x900df, 0x0},
+ {0x900e0, 0x0},
+ {0x900e1, 0x0},
+ {0x900e2, 0x0},
+ {0x900e3, 0x0},
+ {0x900e4, 0x0},
+ {0x900e5, 0x0},
+ {0x900e6, 0x0},
+ {0x900e7, 0x0},
+ {0x900e8, 0x0},
+ {0x900e9, 0x0},
+ {0x900ea, 0x0},
+ {0x900eb, 0x0},
+ {0x900ec, 0x0},
+ {0x900ed, 0x0},
+ {0x900ee, 0x0},
+ {0x900ef, 0x0},
+ {0x900f0, 0x0},
+ {0x900f1, 0x0},
+ {0x900f2, 0x0},
+ {0x900f3, 0x0},
+ {0x900f4, 0x0},
+ {0x900f5, 0x0},
+ {0x900f6, 0x0},
+ {0x900f7, 0x0},
+ {0x900f8, 0x0},
+ {0x900f9, 0x0},
+ {0x900fa, 0x0},
+ {0x900fb, 0x0},
+ {0x900fc, 0x0},
+ {0x900fd, 0x0},
+ {0x900fe, 0x0},
+ {0x900ff, 0x0},
+ {0x90100, 0x0},
+ {0x90101, 0x0},
+ {0x90102, 0x0},
+ {0x90103, 0x0},
+ {0x90104, 0x0},
+ {0x90105, 0x0},
+ {0x90106, 0x0},
+ {0x90107, 0x0},
+ {0x90108, 0x0},
+ {0x90109, 0x0},
+ {0x9010a, 0x0},
+ {0x9010b, 0x0},
+ {0x9010c, 0x0},
+ {0x9010d, 0x0},
+ {0x9010e, 0x0},
+ {0x9010f, 0x0},
+ {0x90110, 0x0},
+ {0x90111, 0x0},
+ {0x90112, 0x0},
+ {0x90113, 0x0},
+ {0x90114, 0x0},
+ {0x90115, 0x0},
+ {0x90116, 0x0},
+ {0x90117, 0x0},
+ {0x90118, 0x0},
+ {0x90119, 0x0},
+ {0x9011a, 0x0},
+ {0x9011b, 0x0},
+ {0x9011c, 0x0},
+ {0x9011d, 0x0},
+ {0x9011e, 0x0},
+ {0x9011f, 0x0},
+ {0x90120, 0x0},
+ {0x90121, 0x0},
+ {0x90122, 0x0},
+ {0x90123, 0x0},
+ {0x90124, 0x0},
+ {0x90125, 0x0},
+ {0x90126, 0x0},
+ {0x90127, 0x0},
+ {0x90128, 0x0},
+ {0x90129, 0x0},
+ {0x9012a, 0x0},
+ {0x9012b, 0x0},
+ {0x9012c, 0x0},
+ {0x9012d, 0x0},
+ {0x9012e, 0x0},
+ {0x9012f, 0x0},
+ {0x90130, 0x0},
+ {0x90131, 0x0},
+ {0x90132, 0x0},
+ {0x90133, 0x0},
+ {0x90134, 0x0},
+ {0x90135, 0x0},
+ {0x90136, 0x0},
+ {0x90137, 0x0},
+ {0x90138, 0x0},
+ {0x90139, 0x0},
+ {0x9013a, 0x0},
+ {0x9013b, 0x0},
+ {0x9013c, 0x0},
+ {0x9013d, 0x0},
+ {0x9013e, 0x0},
+ {0x9013f, 0x0},
+ {0x90140, 0x0},
+ {0x90141, 0x0},
+ {0x90142, 0x0},
+ {0x90143, 0x0},
+ {0x90144, 0x0},
+ {0x90145, 0x0},
+ {0x90146, 0x0},
+ {0x90147, 0x0},
+ {0x90148, 0x0},
+ {0x90149, 0x0},
+ {0x9014a, 0x0},
+ {0x9014b, 0x0},
+ {0x9014c, 0x0},
+ {0x9014d, 0x0},
+ {0x9014e, 0x0},
+ {0x9014f, 0x0},
+ {0x90150, 0x0},
+ {0x90151, 0x0},
+ {0x90152, 0x0},
+ {0x90153, 0x0},
+ {0x90154, 0x0},
+ {0x90155, 0x0},
+ {0x90156, 0x0},
+ {0x90157, 0x0},
+ {0x90158, 0x0},
+ {0x90159, 0x0},
+ {0x9015a, 0x0},
+ {0x9015b, 0x0},
+ {0x9015c, 0x0},
+ {0x9015d, 0x0},
+ {0x9015e, 0x0},
+ {0x9015f, 0x0},
+ {0x90160, 0x0},
+ {0x90161, 0x0},
+ {0x90162, 0x0},
+ {0x90163, 0x0},
+ {0x90164, 0x0},
+ {0x90165, 0x0},
+ {0x90166, 0x0},
+ {0x90167, 0x0},
+ {0x90168, 0x0},
+ {0x90169, 0x0},
+ {0x9016a, 0x0},
+ {0x9016b, 0x0},
+ {0x9016c, 0x0},
+ {0x9016d, 0x0},
+ {0x9016e, 0x0},
+ {0x9016f, 0x0},
+ {0x90170, 0x0},
+ {0x90171, 0x0},
+ {0x90172, 0x0},
+ {0x90173, 0x0},
+ {0x90174, 0x0},
+ {0x90175, 0x0},
+ {0x90176, 0x0},
+ {0x90177, 0x0},
+ {0x90178, 0x0},
+ {0x90179, 0x0},
+ {0x9017a, 0x0},
+ {0x9017b, 0x0},
+ {0x9017c, 0x0},
+ {0x9017d, 0x0},
+ {0x9017e, 0x0},
+ {0x9017f, 0x0},
+ {0x90180, 0x0},
+ {0x90181, 0x0},
+ {0x90182, 0x0},
+ {0x90183, 0x0},
+ {0x90184, 0x0},
+ {0x90006, 0x0},
+ {0x90007, 0x0},
+ {0x90008, 0x0},
+ {0x90009, 0x0},
+ {0x9000a, 0x0},
+ {0x9000b, 0x0},
+ {0xd00e7, 0x0},
+ {0x90017, 0x0},
+ {0x9001f, 0x0},
+ {0x90026, 0x0},
+ {0x400d0, 0x0},
+ {0x400d1, 0x0},
+ {0x400d2, 0x0},
+ {0x400d3, 0x0},
+ {0x400d4, 0x0},
+ {0x400d5, 0x0},
+ {0x400d6, 0x0},
+ {0x400d7, 0x0},
+ {0x200be, 0x0},
+ {0x2000b, 0x0},
+ {0x2000c, 0x0},
+ {0x2000d, 0x0},
+ {0x2000e, 0x0},
+ {0x12000b, 0x0},
+ {0x12000c, 0x0},
+ {0x12000d, 0x0},
+ {0x12000e, 0x0},
+ {0x22000b, 0x0},
+ {0x22000c, 0x0},
+ {0x22000d, 0x0},
+ {0x22000e, 0x0},
+ {0x9000c, 0x0},
+ {0x9000d, 0x0},
+ {0x9000e, 0x0},
+ {0x9000f, 0x0},
+ {0x90010, 0x0},
+ {0x90011, 0x0},
+ {0x90012, 0x0},
+ {0x90013, 0x0},
+ {0x20010, 0x0},
+ {0x20011, 0x0},
+ {0x120010, 0x0},
+ {0x120011, 0x0},
+ {0x40080, 0x0},
+ {0x40081, 0x0},
+ {0x40082, 0x0},
+ {0x40083, 0x0},
+ {0x40084, 0x0},
+ {0x40085, 0x0},
+ {0x140080, 0x0},
+ {0x140081, 0x0},
+ {0x140082, 0x0},
+ {0x140083, 0x0},
+ {0x140084, 0x0},
+ {0x140085, 0x0},
+ {0x240080, 0x0},
+ {0x240081, 0x0},
+ {0x240082, 0x0},
+ {0x240083, 0x0},
+ {0x240084, 0x0},
+ {0x240085, 0x0},
+ {0x400fd, 0x0},
+ {0x400f1, 0x0},
+ {0x10011, 0x0},
+ {0x10012, 0x0},
+ {0x10013, 0x0},
+ {0x10018, 0x0},
+ {0x10002, 0x0},
+ {0x100b2, 0x0},
+ {0x101b4, 0x0},
+ {0x102b4, 0x0},
+ {0x103b4, 0x0},
+ {0x104b4, 0x0},
+ {0x105b4, 0x0},
+ {0x106b4, 0x0},
+ {0x107b4, 0x0},
+ {0x108b4, 0x0},
+ {0x11011, 0x0},
+ {0x11012, 0x0},
+ {0x11013, 0x0},
+ {0x11018, 0x0},
+ {0x11002, 0x0},
+ {0x110b2, 0x0},
+ {0x111b4, 0x0},
+ {0x112b4, 0x0},
+ {0x113b4, 0x0},
+ {0x114b4, 0x0},
+ {0x115b4, 0x0},
+ {0x116b4, 0x0},
+ {0x117b4, 0x0},
+ {0x118b4, 0x0},
+ {0x20089, 0x0},
+ {0xc0080, 0x0},
+ {0x200cb, 0x0},
+ {0x10068, 0x0},
+ {0x10069, 0x0},
+ {0x10168, 0x0},
+ {0x10169, 0x0},
+ {0x10268, 0x0},
+ {0x10269, 0x0},
+ {0x10368, 0x0},
+ {0x10369, 0x0},
+ {0x10468, 0x0},
+ {0x10469, 0x0},
+ {0x10568, 0x0},
+ {0x10569, 0x0},
+ {0x10668, 0x0},
+ {0x10669, 0x0},
+ {0x10768, 0x0},
+ {0x10769, 0x0},
+ {0x10868, 0x0},
+ {0x10869, 0x0},
+ {0x100aa, 0x0},
+ {0x10062, 0x0},
+ {0x10001, 0x0},
+ {0x100a0, 0x0},
+ {0x100a1, 0x0},
+ {0x100a2, 0x0},
+ {0x100a3, 0x0},
+ {0x100a4, 0x0},
+ {0x100a5, 0x0},
+ {0x100a6, 0x0},
+ {0x100a7, 0x0},
+ {0x11068, 0x0},
+ {0x11069, 0x0},
+ {0x11168, 0x0},
+ {0x11169, 0x0},
+ {0x11268, 0x0},
+ {0x11269, 0x0},
+ {0x11368, 0x0},
+ {0x11369, 0x0},
+ {0x11468, 0x0},
+ {0x11469, 0x0},
+ {0x11568, 0x0},
+ {0x11569, 0x0},
+ {0x11668, 0x0},
+ {0x11669, 0x0},
+ {0x11768, 0x0},
+ {0x11769, 0x0},
+ {0x11868, 0x0},
+ {0x11869, 0x0},
+ {0x110aa, 0x0},
+ {0x11062, 0x0},
+ {0x11001, 0x0},
+ {0x110a0, 0x0},
+ {0x110a1, 0x0},
+ {0x110a2, 0x0},
+ {0x110a3, 0x0},
+ {0x110a4, 0x0},
+ {0x110a5, 0x0},
+ {0x110a6, 0x0},
+ {0x110a7, 0x0},
+ {0x80, 0x0},
+ {0x1080, 0x0},
+ {0x2080, 0x0},
+ {0x10020, 0x0},
+ {0x10080, 0x0},
+ {0x10081, 0x0},
+ {0x100d0, 0x0},
+ {0x100d1, 0x0},
+ {0x1008c, 0x0},
+ {0x1008d, 0x0},
+ {0x10180, 0x0},
+ {0x10181, 0x0},
+ {0x101d0, 0x0},
+ {0x101d1, 0x0},
+ {0x1018c, 0x0},
+ {0x1018d, 0x0},
+ {0x100c0, 0x0},
+ {0x100c1, 0x0},
+ {0x101c0, 0x0},
+ {0x101c1, 0x0},
+ {0x102c0, 0x0},
+ {0x102c1, 0x0},
+ {0x103c0, 0x0},
+ {0x103c1, 0x0},
+ {0x104c0, 0x0},
+ {0x104c1, 0x0},
+ {0x105c0, 0x0},
+ {0x105c1, 0x0},
+ {0x106c0, 0x0},
+ {0x106c1, 0x0},
+ {0x107c0, 0x0},
+ {0x107c1, 0x0},
+ {0x108c0, 0x0},
+ {0x108c1, 0x0},
+ {0x100ae, 0x0},
+ {0x100af, 0x0},
+ {0x11020, 0x0},
+ {0x11080, 0x0},
+ {0x11081, 0x0},
+ {0x110d0, 0x0},
+ {0x110d1, 0x0},
+ {0x1108c, 0x0},
+ {0x1108d, 0x0},
+ {0x11180, 0x0},
+ {0x11181, 0x0},
+ {0x111d0, 0x0},
+ {0x111d1, 0x0},
+ {0x1118c, 0x0},
+ {0x1118d, 0x0},
+ {0x110c0, 0x0},
+ {0x110c1, 0x0},
+ {0x111c0, 0x0},
+ {0x111c1, 0x0},
+ {0x112c0, 0x0},
+ {0x112c1, 0x0},
+ {0x113c0, 0x0},
+ {0x113c1, 0x0},
+ {0x114c0, 0x0},
+ {0x114c1, 0x0},
+ {0x115c0, 0x0},
+ {0x115c1, 0x0},
+ {0x116c0, 0x0},
+ {0x116c1, 0x0},
+ {0x117c0, 0x0},
+ {0x117c1, 0x0},
+ {0x118c0, 0x0},
+ {0x118c1, 0x0},
+ {0x110ae, 0x0},
+ {0x110af, 0x0},
+ {0x90201, 0x0},
+ {0x90202, 0x0},
+ {0x90203, 0x0},
+ {0x90205, 0x0},
+ {0x90206, 0x0},
+ {0x90207, 0x0},
+ {0x90208, 0x0},
+ {0x20020, 0x0},
+ {0x100080, 0x0},
+ {0x101080, 0x0},
+ {0x102080, 0x0},
+ {0x110020, 0x0},
+ {0x110080, 0x0},
+ {0x110081, 0x0},
+ {0x1100d0, 0x0},
+ {0x1100d1, 0x0},
+ {0x11008c, 0x0},
+ {0x11008d, 0x0},
+ {0x110180, 0x0},
+ {0x110181, 0x0},
+ {0x1101d0, 0x0},
+ {0x1101d1, 0x0},
+ {0x11018c, 0x0},
+ {0x11018d, 0x0},
+ {0x1100c0, 0x0},
+ {0x1100c1, 0x0},
+ {0x1101c0, 0x0},
+ {0x1101c1, 0x0},
+ {0x1102c0, 0x0},
+ {0x1102c1, 0x0},
+ {0x1103c0, 0x0},
+ {0x1103c1, 0x0},
+ {0x1104c0, 0x0},
+ {0x1104c1, 0x0},
+ {0x1105c0, 0x0},
+ {0x1105c1, 0x0},
+ {0x1106c0, 0x0},
+ {0x1106c1, 0x0},
+ {0x1107c0, 0x0},
+ {0x1107c1, 0x0},
+ {0x1108c0, 0x0},
+ {0x1108c1, 0x0},
+ {0x1100ae, 0x0},
+ {0x1100af, 0x0},
+ {0x111020, 0x0},
+ {0x111080, 0x0},
+ {0x111081, 0x0},
+ {0x1110d0, 0x0},
+ {0x1110d1, 0x0},
+ {0x11108c, 0x0},
+ {0x11108d, 0x0},
+ {0x111180, 0x0},
+ {0x111181, 0x0},
+ {0x1111d0, 0x0},
+ {0x1111d1, 0x0},
+ {0x11118c, 0x0},
+ {0x11118d, 0x0},
+ {0x1110c0, 0x0},
+ {0x1110c1, 0x0},
+ {0x1111c0, 0x0},
+ {0x1111c1, 0x0},
+ {0x1112c0, 0x0},
+ {0x1112c1, 0x0},
+ {0x1113c0, 0x0},
+ {0x1113c1, 0x0},
+ {0x1114c0, 0x0},
+ {0x1114c1, 0x0},
+ {0x1115c0, 0x0},
+ {0x1115c1, 0x0},
+ {0x1116c0, 0x0},
+ {0x1116c1, 0x0},
+ {0x1117c0, 0x0},
+ {0x1117c1, 0x0},
+ {0x1118c0, 0x0},
+ {0x1118c1, 0x0},
+ {0x1110ae, 0x0},
+ {0x1110af, 0x0},
+ {0x190201, 0x0},
+ {0x190202, 0x0},
+ {0x190203, 0x0},
+ {0x190205, 0x0},
+ {0x190206, 0x0},
+ {0x190207, 0x0},
+ {0x190208, 0x0},
+ {0x120020, 0x0},
+ {0x200080, 0x0},
+ {0x201080, 0x0},
+ {0x202080, 0x0},
+ {0x210020, 0x0},
+ {0x210080, 0x0},
+ {0x210081, 0x0},
+ {0x2100d0, 0x0},
+ {0x2100d1, 0x0},
+ {0x21008c, 0x0},
+ {0x21008d, 0x0},
+ {0x210180, 0x0},
+ {0x210181, 0x0},
+ {0x2101d0, 0x0},
+ {0x2101d1, 0x0},
+ {0x21018c, 0x0},
+ {0x21018d, 0x0},
+ {0x2100c0, 0x0},
+ {0x2100c1, 0x0},
+ {0x2101c0, 0x0},
+ {0x2101c1, 0x0},
+ {0x2102c0, 0x0},
+ {0x2102c1, 0x0},
+ {0x2103c0, 0x0},
+ {0x2103c1, 0x0},
+ {0x2104c0, 0x0},
+ {0x2104c1, 0x0},
+ {0x2105c0, 0x0},
+ {0x2105c1, 0x0},
+ {0x2106c0, 0x0},
+ {0x2106c1, 0x0},
+ {0x2107c0, 0x0},
+ {0x2107c1, 0x0},
+ {0x2108c0, 0x0},
+ {0x2108c1, 0x0},
+ {0x2100ae, 0x0},
+ {0x2100af, 0x0},
+ {0x211020, 0x0},
+ {0x211080, 0x0},
+ {0x211081, 0x0},
+ {0x2110d0, 0x0},
+ {0x2110d1, 0x0},
+ {0x21108c, 0x0},
+ {0x21108d, 0x0},
+ {0x211180, 0x0},
+ {0x211181, 0x0},
+ {0x2111d0, 0x0},
+ {0x2111d1, 0x0},
+ {0x21118c, 0x0},
+ {0x21118d, 0x0},
+ {0x2110c0, 0x0},
+ {0x2110c1, 0x0},
+ {0x2111c0, 0x0},
+ {0x2111c1, 0x0},
+ {0x2112c0, 0x0},
+ {0x2112c1, 0x0},
+ {0x2113c0, 0x0},
+ {0x2113c1, 0x0},
+ {0x2114c0, 0x0},
+ {0x2114c1, 0x0},
+ {0x2115c0, 0x0},
+ {0x2115c1, 0x0},
+ {0x2116c0, 0x0},
+ {0x2116c1, 0x0},
+ {0x2117c0, 0x0},
+ {0x2117c1, 0x0},
+ {0x2118c0, 0x0},
+ {0x2118c1, 0x0},
+ {0x2110ae, 0x0},
+ {0x2110af, 0x0},
+ {0x290201, 0x0},
+ {0x290202, 0x0},
+ {0x290203, 0x0},
+ {0x290205, 0x0},
+ {0x290206, 0x0},
+ {0x290207, 0x0},
+ {0x290208, 0x0},
+ {0x220020, 0x0},
+ {0x20077, 0x0},
+ {0x20072, 0x0},
+ {0x20073, 0x0},
+ {0x400c0, 0x0},
+ {0x10040, 0x0},
+ {0x10140, 0x0},
+ {0x10240, 0x0},
+ {0x10340, 0x0},
+ {0x10440, 0x0},
+ {0x10540, 0x0},
+ {0x10640, 0x0},
+ {0x10740, 0x0},
+ {0x10840, 0x0},
+ {0x11040, 0x0},
+ {0x11140, 0x0},
+ {0x11240, 0x0},
+ {0x11340, 0x0},
+ {0x11440, 0x0},
+ {0x11540, 0x0},
+ {0x11640, 0x0},
+ {0x11740, 0x0},
+ {0x11840, 0x0},
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x640},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x131f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P1 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x1},
+ {0x54003, 0x320},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P2 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x102},
+ {0x54003, 0x270},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4800},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4800},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x11},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x11},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x640},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x61},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54010, 0x2080},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+ {0xd0000, 0x0},
+ {0x90000, 0x10},
+ {0x90001, 0x400},
+ {0x90002, 0x10e},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x8},
+ {0x90029, 0xb},
+ {0x9002a, 0x480},
+ {0x9002b, 0x109},
+ {0x9002c, 0x8},
+ {0x9002d, 0x448},
+ {0x9002e, 0x139},
+ {0x9002f, 0x8},
+ {0x90030, 0x478},
+ {0x90031, 0x109},
+ {0x90032, 0x0},
+ {0x90033, 0xe8},
+ {0x90034, 0x109},
+ {0x90035, 0x2},
+ {0x90036, 0x10},
+ {0x90037, 0x139},
+ {0x90038, 0xb},
+ {0x90039, 0x7c0},
+ {0x9003a, 0x139},
+ {0x9003b, 0x44},
+ {0x9003c, 0x633},
+ {0x9003d, 0x159},
+ {0x9003e, 0x14f},
+ {0x9003f, 0x630},
+ {0x90040, 0x159},
+ {0x90041, 0x47},
+ {0x90042, 0x633},
+ {0x90043, 0x149},
+ {0x90044, 0x4f},
+ {0x90045, 0x633},
+ {0x90046, 0x179},
+ {0x90047, 0x8},
+ {0x90048, 0xe0},
+ {0x90049, 0x109},
+ {0x9004a, 0x0},
+ {0x9004b, 0x7c8},
+ {0x9004c, 0x109},
+ {0x9004d, 0x0},
+ {0x9004e, 0x1},
+ {0x9004f, 0x8},
+ {0x90050, 0x30},
+ {0x90051, 0x65a},
+ {0x90052, 0x9},
+ {0x90053, 0x0},
+ {0x90054, 0x45a},
+ {0x90055, 0x9},
+ {0x90056, 0x0},
+ {0x90057, 0x448},
+ {0x90058, 0x109},
+ {0x90059, 0x40},
+ {0x9005a, 0x633},
+ {0x9005b, 0x179},
+ {0x9005c, 0x1},
+ {0x9005d, 0x618},
+ {0x9005e, 0x109},
+ {0x9005f, 0x40c0},
+ {0x90060, 0x633},
+ {0x90061, 0x149},
+ {0x90062, 0x8},
+ {0x90063, 0x4},
+ {0x90064, 0x48},
+ {0x90065, 0x4040},
+ {0x90066, 0x633},
+ {0x90067, 0x149},
+ {0x90068, 0x0},
+ {0x90069, 0x4},
+ {0x9006a, 0x48},
+ {0x9006b, 0x40},
+ {0x9006c, 0x633},
+ {0x9006d, 0x149},
+ {0x9006e, 0x0},
+ {0x9006f, 0x658},
+ {0x90070, 0x109},
+ {0x90071, 0x10},
+ {0x90072, 0x4},
+ {0x90073, 0x18},
+ {0x90074, 0x0},
+ {0x90075, 0x4},
+ {0x90076, 0x78},
+ {0x90077, 0x549},
+ {0x90078, 0x633},
+ {0x90079, 0x159},
+ {0x9007a, 0xd49},
+ {0x9007b, 0x633},
+ {0x9007c, 0x159},
+ {0x9007d, 0x94a},
+ {0x9007e, 0x633},
+ {0x9007f, 0x159},
+ {0x90080, 0x441},
+ {0x90081, 0x633},
+ {0x90082, 0x149},
+ {0x90083, 0x42},
+ {0x90084, 0x633},
+ {0x90085, 0x149},
+ {0x90086, 0x1},
+ {0x90087, 0x633},
+ {0x90088, 0x149},
+ {0x90089, 0x0},
+ {0x9008a, 0xe0},
+ {0x9008b, 0x109},
+ {0x9008c, 0xa},
+ {0x9008d, 0x10},
+ {0x9008e, 0x109},
+ {0x9008f, 0x9},
+ {0x90090, 0x3c0},
+ {0x90091, 0x149},
+ {0x90092, 0x9},
+ {0x90093, 0x3c0},
+ {0x90094, 0x159},
+ {0x90095, 0x18},
+ {0x90096, 0x10},
+ {0x90097, 0x109},
+ {0x90098, 0x0},
+ {0x90099, 0x3c0},
+ {0x9009a, 0x109},
+ {0x9009b, 0x18},
+ {0x9009c, 0x4},
+ {0x9009d, 0x48},
+ {0x9009e, 0x18},
+ {0x9009f, 0x4},
+ {0x900a0, 0x58},
+ {0x900a1, 0xb},
+ {0x900a2, 0x10},
+ {0x900a3, 0x109},
+ {0x900a4, 0x1},
+ {0x900a5, 0x10},
+ {0x900a6, 0x109},
+ {0x900a7, 0x5},
+ {0x900a8, 0x7c0},
+ {0x900a9, 0x109},
+ {0x40000, 0x811},
+ {0x40020, 0x880},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x4008},
+ {0x40021, 0x83},
+ {0x40041, 0x4f},
+ {0x40061, 0x0},
+ {0x40002, 0x4040},
+ {0x40022, 0x83},
+ {0x40042, 0x51},
+ {0x40062, 0x0},
+ {0x40003, 0x811},
+ {0x40023, 0x880},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x720},
+ {0x40024, 0xf},
+ {0x40044, 0x1740},
+ {0x40064, 0x0},
+ {0x40005, 0x16},
+ {0x40025, 0x83},
+ {0x40045, 0x4b},
+ {0x40065, 0x0},
+ {0x40006, 0x716},
+ {0x40026, 0xf},
+ {0x40046, 0x2001},
+ {0x40066, 0x0},
+ {0x40007, 0x716},
+ {0x40027, 0xf},
+ {0x40047, 0x2800},
+ {0x40067, 0x0},
+ {0x40008, 0x716},
+ {0x40028, 0xf},
+ {0x40048, 0xf00},
+ {0x40068, 0x0},
+ {0x40009, 0x720},
+ {0x40029, 0xf},
+ {0x40049, 0x1400},
+ {0x40069, 0x0},
+ {0x4000a, 0xe08},
+ {0x4002a, 0xc15},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x625},
+ {0x4002b, 0x15},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x4028},
+ {0x4002c, 0x80},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0xe08},
+ {0x4002d, 0xc1a},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x625},
+ {0x4002e, 0x1a},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x4040},
+ {0x4002f, 0x80},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x2604},
+ {0x40030, 0x15},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x708},
+ {0x40031, 0x5},
+ {0x40051, 0x0},
+ {0x40071, 0x2002},
+ {0x40012, 0x8},
+ {0x40032, 0x80},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x2604},
+ {0x40033, 0x1a},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x708},
+ {0x40034, 0xa},
+ {0x40054, 0x0},
+ {0x40074, 0x2002},
+ {0x40015, 0x4040},
+ {0x40035, 0x80},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x60a},
+ {0x40036, 0x15},
+ {0x40056, 0x1200},
+ {0x40076, 0x0},
+ {0x40017, 0x61a},
+ {0x40037, 0x15},
+ {0x40057, 0x1300},
+ {0x40077, 0x0},
+ {0x40018, 0x60a},
+ {0x40038, 0x1a},
+ {0x40058, 0x1200},
+ {0x40078, 0x0},
+ {0x40019, 0x642},
+ {0x40039, 0x1a},
+ {0x40059, 0x1300},
+ {0x40079, 0x0},
+ {0x4001a, 0x4808},
+ {0x4003a, 0x880},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x790},
+ {0x900ac, 0x11a},
+ {0x900ad, 0x8},
+ {0x900ae, 0x7aa},
+ {0x900af, 0x2a},
+ {0x900b0, 0x10},
+ {0x900b1, 0x7b2},
+ {0x900b2, 0x2a},
+ {0x900b3, 0x0},
+ {0x900b4, 0x7c8},
+ {0x900b5, 0x109},
+ {0x900b6, 0x10},
+ {0x900b7, 0x10},
+ {0x900b8, 0x109},
+ {0x900b9, 0x10},
+ {0x900ba, 0x2a8},
+ {0x900bb, 0x129},
+ {0x900bc, 0x8},
+ {0x900bd, 0x370},
+ {0x900be, 0x129},
+ {0x900bf, 0xa},
+ {0x900c0, 0x3c8},
+ {0x900c1, 0x1a9},
+ {0x900c2, 0xc},
+ {0x900c3, 0x408},
+ {0x900c4, 0x199},
+ {0x900c5, 0x14},
+ {0x900c6, 0x790},
+ {0x900c7, 0x11a},
+ {0x900c8, 0x8},
+ {0x900c9, 0x4},
+ {0x900ca, 0x18},
+ {0x900cb, 0xe},
+ {0x900cc, 0x408},
+ {0x900cd, 0x199},
+ {0x900ce, 0x8},
+ {0x900cf, 0x8568},
+ {0x900d0, 0x108},
+ {0x900d1, 0x18},
+ {0x900d2, 0x790},
+ {0x900d3, 0x16a},
+ {0x900d4, 0x8},
+ {0x900d5, 0x1d8},
+ {0x900d6, 0x169},
+ {0x900d7, 0x10},
+ {0x900d8, 0x8558},
+ {0x900d9, 0x168},
+ {0x900da, 0x1ff8},
+ {0x900db, 0x85a8},
+ {0x900dc, 0x1e8},
+ {0x900dd, 0x50},
+ {0x900de, 0x798},
+ {0x900df, 0x16a},
+ {0x900e0, 0x60},
+ {0x900e1, 0x7a0},
+ {0x900e2, 0x16a},
+ {0x900e3, 0x8},
+ {0x900e4, 0x8310},
+ {0x900e5, 0x168},
+ {0x900e6, 0x8},
+ {0x900e7, 0xa310},
+ {0x900e8, 0x168},
+ {0x900e9, 0xa},
+ {0x900ea, 0x408},
+ {0x900eb, 0x169},
+ {0x900ec, 0x6e},
+ {0x900ed, 0x0},
+ {0x900ee, 0x68},
+ {0x900ef, 0x0},
+ {0x900f0, 0x408},
+ {0x900f1, 0x169},
+ {0x900f2, 0x0},
+ {0x900f3, 0x8310},
+ {0x900f4, 0x168},
+ {0x900f5, 0x0},
+ {0x900f6, 0xa310},
+ {0x900f7, 0x168},
+ {0x900f8, 0x1ff8},
+ {0x900f9, 0x85a8},
+ {0x900fa, 0x1e8},
+ {0x900fb, 0x68},
+ {0x900fc, 0x798},
+ {0x900fd, 0x16a},
+ {0x900fe, 0x78},
+ {0x900ff, 0x7a0},
+ {0x90100, 0x16a},
+ {0x90101, 0x68},
+ {0x90102, 0x790},
+ {0x90103, 0x16a},
+ {0x90104, 0x8},
+ {0x90105, 0x8b10},
+ {0x90106, 0x168},
+ {0x90107, 0x8},
+ {0x90108, 0xab10},
+ {0x90109, 0x168},
+ {0x9010a, 0xa},
+ {0x9010b, 0x408},
+ {0x9010c, 0x169},
+ {0x9010d, 0x58},
+ {0x9010e, 0x0},
+ {0x9010f, 0x68},
+ {0x90110, 0x0},
+ {0x90111, 0x408},
+ {0x90112, 0x169},
+ {0x90113, 0x0},
+ {0x90114, 0x8b10},
+ {0x90115, 0x168},
+ {0x90116, 0x1},
+ {0x90117, 0xab10},
+ {0x90118, 0x168},
+ {0x90119, 0x0},
+ {0x9011a, 0x1d8},
+ {0x9011b, 0x169},
+ {0x9011c, 0x80},
+ {0x9011d, 0x790},
+ {0x9011e, 0x16a},
+ {0x9011f, 0x18},
+ {0x90120, 0x7aa},
+ {0x90121, 0x6a},
+ {0x90122, 0xa},
+ {0x90123, 0x0},
+ {0x90124, 0x1e9},
+ {0x90125, 0x8},
+ {0x90126, 0x8080},
+ {0x90127, 0x108},
+ {0x90128, 0xf},
+ {0x90129, 0x408},
+ {0x9012a, 0x169},
+ {0x9012b, 0xc},
+ {0x9012c, 0x0},
+ {0x9012d, 0x68},
+ {0x9012e, 0x9},
+ {0x9012f, 0x0},
+ {0x90130, 0x1a9},
+ {0x90131, 0x0},
+ {0x90132, 0x408},
+ {0x90133, 0x169},
+ {0x90134, 0x0},
+ {0x90135, 0x8080},
+ {0x90136, 0x108},
+ {0x90137, 0x8},
+ {0x90138, 0x7aa},
+ {0x90139, 0x6a},
+ {0x9013a, 0x0},
+ {0x9013b, 0x8568},
+ {0x9013c, 0x108},
+ {0x9013d, 0xb7},
+ {0x9013e, 0x790},
+ {0x9013f, 0x16a},
+ {0x90140, 0x1f},
+ {0x90141, 0x0},
+ {0x90142, 0x68},
+ {0x90143, 0x8},
+ {0x90144, 0x8558},
+ {0x90145, 0x168},
+ {0x90146, 0xf},
+ {0x90147, 0x408},
+ {0x90148, 0x169},
+ {0x90149, 0xd},
+ {0x9014a, 0x0},
+ {0x9014b, 0x68},
+ {0x9014c, 0x0},
+ {0x9014d, 0x408},
+ {0x9014e, 0x169},
+ {0x9014f, 0x0},
+ {0x90150, 0x8558},
+ {0x90151, 0x168},
+ {0x90152, 0x8},
+ {0x90153, 0x3c8},
+ {0x90154, 0x1a9},
+ {0x90155, 0x3},
+ {0x90156, 0x370},
+ {0x90157, 0x129},
+ {0x90158, 0x20},
+ {0x90159, 0x2aa},
+ {0x9015a, 0x9},
+ {0x9015b, 0x8},
+ {0x9015c, 0xe8},
+ {0x9015d, 0x109},
+ {0x9015e, 0x0},
+ {0x9015f, 0x8140},
+ {0x90160, 0x10c},
+ {0x90161, 0x10},
+ {0x90162, 0x8138},
+ {0x90163, 0x104},
+ {0x90164, 0x8},
+ {0x90165, 0x448},
+ {0x90166, 0x109},
+ {0x90167, 0xf},
+ {0x90168, 0x7c0},
+ {0x90169, 0x109},
+ {0x9016a, 0x0},
+ {0x9016b, 0xe8},
+ {0x9016c, 0x109},
+ {0x9016d, 0x47},
+ {0x9016e, 0x630},
+ {0x9016f, 0x109},
+ {0x90170, 0x8},
+ {0x90171, 0x618},
+ {0x90172, 0x109},
+ {0x90173, 0x8},
+ {0x90174, 0xe0},
+ {0x90175, 0x109},
+ {0x90176, 0x0},
+ {0x90177, 0x7c8},
+ {0x90178, 0x109},
+ {0x90179, 0x8},
+ {0x9017a, 0x8140},
+ {0x9017b, 0x10c},
+ {0x9017c, 0x0},
+ {0x9017d, 0x478},
+ {0x9017e, 0x109},
+ {0x9017f, 0x0},
+ {0x90180, 0x1},
+ {0x90181, 0x8},
+ {0x90182, 0x8},
+ {0x90183, 0x4},
+ {0x90184, 0x0},
+ {0x90006, 0x8},
+ {0x90007, 0x7c8},
+ {0x90008, 0x109},
+ {0x90009, 0x0},
+ {0x9000a, 0x400},
+ {0x9000b, 0x106},
+ {0xd00e7, 0x400},
+ {0x90017, 0x0},
+ {0x9001f, 0x2b},
+ {0x90026, 0x69},
+ {0x400d0, 0x0},
+ {0x400d1, 0x101},
+ {0x400d2, 0x105},
+ {0x400d3, 0x107},
+ {0x400d4, 0x10f},
+ {0x400d5, 0x202},
+ {0x400d6, 0x20a},
+ {0x400d7, 0x20b},
+ {0x2003a, 0x2},
+ {0x200be, 0x3},
+ {0x2000b, 0x1c2},
+ {0x2000c, 0x64},
+ {0x2000d, 0x3e8},
+ {0x2000e, 0x2c},
+ {0x12000b, 0xe1},
+ {0x12000c, 0x32},
+ {0x12000d, 0x1f4},
+ {0x12000e, 0x10},
+ {0x22000b, 0xb0},
+ {0x22000c, 0x27},
+ {0x22000d, 0x186},
+ {0x22000e, 0x10},
+ {0x9000c, 0x0},
+ {0x9000d, 0x173},
+ {0x9000e, 0x60},
+ {0x9000f, 0x6110},
+ {0x90010, 0x2152},
+ {0x90011, 0xdfbd},
+ {0x90012, 0x2060},
+ {0x90013, 0x6152},
+ {0x20010, 0x5a},
+ {0x20011, 0x3},
+ {0x120010, 0x5a},
+ {0x120011, 0x3},
+ {0x40080, 0xe0},
+ {0x40081, 0x12},
+ {0x40082, 0xe0},
+ {0x40083, 0x12},
+ {0x40084, 0xe0},
+ {0x40085, 0x12},
+ {0x140080, 0xe0},
+ {0x140081, 0x12},
+ {0x140082, 0xe0},
+ {0x140083, 0x12},
+ {0x140084, 0xe0},
+ {0x140085, 0x12},
+ {0x240080, 0xe0},
+ {0x240081, 0x12},
+ {0x240082, 0xe0},
+ {0x240083, 0x12},
+ {0x240084, 0xe0},
+ {0x240085, 0x12},
+ {0x400fd, 0xf},
+ {0x400f1, 0xe},
+ {0x10011, 0x1},
+ {0x10012, 0x1},
+ {0x10013, 0x180},
+ {0x10018, 0x1},
+ {0x10002, 0x6209},
+ {0x100b2, 0x1},
+ {0x101b4, 0x1},
+ {0x102b4, 0x1},
+ {0x103b4, 0x1},
+ {0x104b4, 0x1},
+ {0x105b4, 0x1},
+ {0x106b4, 0x1},
+ {0x107b4, 0x1},
+ {0x108b4, 0x1},
+ {0x11011, 0x1},
+ {0x11012, 0x1},
+ {0x11013, 0x180},
+ {0x11018, 0x1},
+ {0x11002, 0x6209},
+ {0x110b2, 0x1},
+ {0x111b4, 0x1},
+ {0x112b4, 0x1},
+ {0x113b4, 0x1},
+ {0x114b4, 0x1},
+ {0x115b4, 0x1},
+ {0x116b4, 0x1},
+ {0x117b4, 0x1},
+ {0x118b4, 0x1},
+ {0x20089, 0x1},
+ {0x20088, 0x19},
+ {0xc0080, 0x0},
+ {0xd0000, 0x1},
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+ {
+ /* P0 1600mts 1D */
+ .drate = 1600,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+ },
+ {
+ /* P1 800mts 1D */
+ .drate = 800,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+ },
+ {
+ /* P2 625mts 1D */
+ .drate = 625,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+ },
+ {
+ /* P0 1600mts 2D */
+ .drate = 1600,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = ddr_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+ },
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing_1600mts = {
+ .ddrc_cfg = ddr_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+ .ddrphy_cfg = ddr_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+ .fsp_msg = ddr_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+ .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+ .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+ .ddrphy_pie = ddr_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+ .fsp_table = { 1600, 800, 625, },
+ .fsp_cfg = ddr_dram_fsp_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
diff --git a/board/freescale/imx91_evk/lpddr4_timing_1600mts_ecc.c b/board/freescale/imx91_evk/lpddr4_timing_1600mts_ecc.c
new file mode 100644
index 0000000..4594ab6
--- /dev/null
+++ b/board/freescale/imx91_evk/lpddr4_timing_1600mts_ecc.c
@@ -0,0 +1,1995 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2024 NXP
+ *
+ * Code generated with DDR Tool v3.3.0_1.9-d1cdb7d3.
+ * DDR PHY FW2022.01
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+/* Initialize DDRC registers */
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+ {0x4e300110, 0x44100001},
+ {0x4e300000, 0x8000ef},
+ {0x4e300008, 0x0},
+ {0x4e300080, 0x80000512},
+ {0x4e300084, 0x0},
+ {0x4e300114, 0x1012},
+ {0x4e300260, 0x80},
+ {0x4e300f04, 0x80},
+ {0x4e300800, 0x43b30d00},
+ {0x4e300804, 0x1f1f1f1f},
+ {0x4e301000, 0xc0000000},
+ {0x4e301240, 0x0},
+ {0x4e301244, 0x0},
+ {0x4e301248, 0x0},
+ {0x4e30124c, 0x0},
+ {0x4e301250, 0x0},
+ {0x4e301254, 0x0},
+ {0x4e301258, 0x0},
+ {0x4e30125c, 0x0},
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+ {
+ {
+ {0x4e300100, 0x02121100},
+ {0x4e300104, 0xF866000C},
+ {0x4e300108, 0xF2FA8088},
+ {0x4e30010C, 0x0061E1A0},
+ {0x4e300124, 0x0C340000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30700000},
+ {0x4e300170, 0x8A0A0508},
+ {0x4e300250, 0x00000011},
+ {0x4e300254, 0x00900090},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ {0x4e300300, 0x0F220F09},
+ {0x4e300304, 0x00901008},
+ {0x4e300308, 0x063C061A},
+ },
+ {
+ {0x01, 0xA4},
+ {0x02, 0x52},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00091000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x81820A48},
+ {0x4e30010C, 0x00310110},
+ {0x4e300124, 0x061A0000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30100000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000009},
+ {0x4e300254, 0x00440044},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00061000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x6E62FA48},
+ {0x4e30010C, 0x0031010D},
+ {0x4e300124, 0x04C50000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30000000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000007},
+ {0x4e300254, 0x00340034},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 1,
+ },
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+ {0x100a0, 0x4},
+ {0x100a1, 0x5},
+ {0x100a2, 0x6},
+ {0x100a3, 0x7},
+ {0x100a4, 0x0},
+ {0x100a5, 0x1},
+ {0x100a6, 0x2},
+ {0x100a7, 0x3},
+ {0x110a0, 0x3},
+ {0x110a1, 0x2},
+ {0x110a2, 0x0},
+ {0x110a3, 0x1},
+ {0x110a4, 0x7},
+ {0x110a5, 0x6},
+ {0x110a6, 0x4},
+ {0x110a7, 0x5},
+ {0x1005f, 0x1ff},
+ {0x1015f, 0x1ff},
+ {0x1105f, 0x1ff},
+ {0x1115f, 0x1ff},
+ {0x11005f, 0x1ff},
+ {0x11015f, 0x1ff},
+ {0x11105f, 0x1ff},
+ {0x11115f, 0x1ff},
+ {0x21005f, 0x1ff},
+ {0x21015f, 0x1ff},
+ {0x21105f, 0x1ff},
+ {0x21115f, 0x1ff},
+ {0x55, 0x1ff},
+ {0x1055, 0x1ff},
+ {0x2055, 0x1ff},
+ {0x200c5, 0xb},
+ {0x1200c5, 0x3},
+ {0x2200c5, 0x7},
+ {0x2002e, 0x1},
+ {0x12002e, 0x1},
+ {0x22002e, 0x2},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x2007d, 0x212},
+ {0x2007c, 0x61},
+ {0x120024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x12007d, 0x212},
+ {0x12007c, 0x61},
+ {0x220024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x22007d, 0x212},
+ {0x22007c, 0x61},
+ {0x20056, 0x3},
+ {0x120056, 0x3},
+ {0x220056, 0x3},
+ {0x1004d, 0x600},
+ {0x1014d, 0x600},
+ {0x1104d, 0x600},
+ {0x1114d, 0x600},
+ {0x11004d, 0x600},
+ {0x11014d, 0x600},
+ {0x11104d, 0x600},
+ {0x11114d, 0x600},
+ {0x21004d, 0x600},
+ {0x21014d, 0x600},
+ {0x21104d, 0x600},
+ {0x21114d, 0x600},
+ {0x10049, 0xe3f},
+ {0x10149, 0xe3f},
+ {0x11049, 0xe3f},
+ {0x11149, 0xe3f},
+ {0x110049, 0xe3f},
+ {0x110149, 0xe3f},
+ {0x111049, 0xe3f},
+ {0x111149, 0xe3f},
+ {0x210049, 0xe3f},
+ {0x210149, 0xe3f},
+ {0x211049, 0xe3f},
+ {0x211149, 0xe3f},
+ {0x43, 0x7f},
+ {0x1043, 0x7f},
+ {0x2043, 0x7f},
+ {0x20018, 0x1},
+ {0x20075, 0x4},
+ {0x20050, 0x11},
+ {0x2009b, 0x2},
+ {0x20008, 0x190},
+ {0x120008, 0xc8},
+ {0x220008, 0x9c},
+ {0x20088, 0x9},
+ {0x200b2, 0x10c},
+ {0x10043, 0x5a1},
+ {0x10143, 0x5a1},
+ {0x11043, 0x5a1},
+ {0x11143, 0x5a1},
+ {0x1200b2, 0x10c},
+ {0x110043, 0x5a1},
+ {0x110143, 0x5a1},
+ {0x111043, 0x5a1},
+ {0x111143, 0x5a1},
+ {0x2200b2, 0x10c},
+ {0x210043, 0x5a1},
+ {0x210143, 0x5a1},
+ {0x211043, 0x5a1},
+ {0x211143, 0x5a1},
+ {0x200fa, 0x2},
+ {0x1200fa, 0x2},
+ {0x2200fa, 0x2},
+ {0x20019, 0x1},
+ {0x120019, 0x1},
+ {0x220019, 0x1},
+ {0x200f0, 0x600},
+ {0x200f1, 0x0},
+ {0x200f2, 0x4444},
+ {0x200f3, 0x8888},
+ {0x200f4, 0x5655},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0xf000},
+ {0x1004a, 0x500},
+ {0x1104a, 0x500},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0x20021, 0x0},
+ {0x200c7, 0x21},
+ {0x1200c7, 0x41},
+ {0x200ca, 0x24},
+ {0x1200ca, 0x24},
+};
+
+/* PHY trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+ {0x1005f, 0x0},
+ {0x1015f, 0x0},
+ {0x1105f, 0x0},
+ {0x1115f, 0x0},
+ {0x11005f, 0x0},
+ {0x11015f, 0x0},
+ {0x11105f, 0x0},
+ {0x11115f, 0x0},
+ {0x21005f, 0x0},
+ {0x21015f, 0x0},
+ {0x21105f, 0x0},
+ {0x21115f, 0x0},
+ {0x55, 0x0},
+ {0x1055, 0x0},
+ {0x2055, 0x0},
+ {0x200c5, 0x0},
+ {0x1200c5, 0x0},
+ {0x2200c5, 0x0},
+ {0x2002e, 0x0},
+ {0x12002e, 0x0},
+ {0x22002e, 0x0},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x0},
+ {0x2003a, 0x0},
+ {0x2007d, 0x0},
+ {0x2007c, 0x0},
+ {0x120024, 0x0},
+ {0x12007d, 0x0},
+ {0x12007c, 0x0},
+ {0x220024, 0x0},
+ {0x22007d, 0x0},
+ {0x22007c, 0x0},
+ {0x20056, 0x0},
+ {0x120056, 0x0},
+ {0x220056, 0x0},
+ {0x1004d, 0x0},
+ {0x1014d, 0x0},
+ {0x1104d, 0x0},
+ {0x1114d, 0x0},
+ {0x11004d, 0x0},
+ {0x11014d, 0x0},
+ {0x11104d, 0x0},
+ {0x11114d, 0x0},
+ {0x21004d, 0x0},
+ {0x21014d, 0x0},
+ {0x21104d, 0x0},
+ {0x21114d, 0x0},
+ {0x10049, 0x0},
+ {0x10149, 0x0},
+ {0x11049, 0x0},
+ {0x11149, 0x0},
+ {0x110049, 0x0},
+ {0x110149, 0x0},
+ {0x111049, 0x0},
+ {0x111149, 0x0},
+ {0x210049, 0x0},
+ {0x210149, 0x0},
+ {0x211049, 0x0},
+ {0x211149, 0x0},
+ {0x43, 0x0},
+ {0x1043, 0x0},
+ {0x2043, 0x0},
+ {0x20018, 0x0},
+ {0x20075, 0x0},
+ {0x20050, 0x0},
+ {0x2009b, 0x0},
+ {0x20008, 0x0},
+ {0x120008, 0x0},
+ {0x220008, 0x0},
+ {0x20088, 0x0},
+ {0x200b2, 0x0},
+ {0x10043, 0x0},
+ {0x10143, 0x0},
+ {0x11043, 0x0},
+ {0x11143, 0x0},
+ {0x1200b2, 0x0},
+ {0x110043, 0x0},
+ {0x110143, 0x0},
+ {0x111043, 0x0},
+ {0x111143, 0x0},
+ {0x2200b2, 0x0},
+ {0x210043, 0x0},
+ {0x210143, 0x0},
+ {0x211043, 0x0},
+ {0x211143, 0x0},
+ {0x200fa, 0x0},
+ {0x1200fa, 0x0},
+ {0x2200fa, 0x0},
+ {0x20019, 0x0},
+ {0x120019, 0x0},
+ {0x220019, 0x0},
+ {0x200f0, 0x0},
+ {0x200f1, 0x0},
+ {0x200f2, 0x0},
+ {0x200f3, 0x0},
+ {0x200f4, 0x0},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0x0},
+ {0x1004a, 0x0},
+ {0x1104a, 0x0},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0xd0000, 0x0},
+ {0x90000, 0x0},
+ {0x90001, 0x0},
+ {0x90002, 0x0},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x0},
+ {0x90029, 0x0},
+ {0x9002a, 0x0},
+ {0x9002b, 0x0},
+ {0x9002c, 0x0},
+ {0x9002d, 0x0},
+ {0x9002e, 0x0},
+ {0x9002f, 0x0},
+ {0x90030, 0x0},
+ {0x90031, 0x0},
+ {0x90032, 0x0},
+ {0x90033, 0x0},
+ {0x90034, 0x0},
+ {0x90035, 0x0},
+ {0x90036, 0x0},
+ {0x90037, 0x0},
+ {0x90038, 0x0},
+ {0x90039, 0x0},
+ {0x9003a, 0x0},
+ {0x9003b, 0x0},
+ {0x9003c, 0x0},
+ {0x9003d, 0x0},
+ {0x9003e, 0x0},
+ {0x9003f, 0x0},
+ {0x90040, 0x0},
+ {0x90041, 0x0},
+ {0x90042, 0x0},
+ {0x90043, 0x0},
+ {0x90044, 0x0},
+ {0x90045, 0x0},
+ {0x90046, 0x0},
+ {0x90047, 0x0},
+ {0x90048, 0x0},
+ {0x90049, 0x0},
+ {0x9004a, 0x0},
+ {0x9004b, 0x0},
+ {0x9004c, 0x0},
+ {0x9004d, 0x0},
+ {0x9004e, 0x0},
+ {0x9004f, 0x0},
+ {0x90050, 0x0},
+ {0x90051, 0x0},
+ {0x90052, 0x0},
+ {0x90053, 0x0},
+ {0x90054, 0x0},
+ {0x90055, 0x0},
+ {0x90056, 0x0},
+ {0x90057, 0x0},
+ {0x90058, 0x0},
+ {0x90059, 0x0},
+ {0x9005a, 0x0},
+ {0x9005b, 0x0},
+ {0x9005c, 0x0},
+ {0x9005d, 0x0},
+ {0x9005e, 0x0},
+ {0x9005f, 0x0},
+ {0x90060, 0x0},
+ {0x90061, 0x0},
+ {0x90062, 0x0},
+ {0x90063, 0x0},
+ {0x90064, 0x0},
+ {0x90065, 0x0},
+ {0x90066, 0x0},
+ {0x90067, 0x0},
+ {0x90068, 0x0},
+ {0x90069, 0x0},
+ {0x9006a, 0x0},
+ {0x9006b, 0x0},
+ {0x9006c, 0x0},
+ {0x9006d, 0x0},
+ {0x9006e, 0x0},
+ {0x9006f, 0x0},
+ {0x90070, 0x0},
+ {0x90071, 0x0},
+ {0x90072, 0x0},
+ {0x90073, 0x0},
+ {0x90074, 0x0},
+ {0x90075, 0x0},
+ {0x90076, 0x0},
+ {0x90077, 0x0},
+ {0x90078, 0x0},
+ {0x90079, 0x0},
+ {0x9007a, 0x0},
+ {0x9007b, 0x0},
+ {0x9007c, 0x0},
+ {0x9007d, 0x0},
+ {0x9007e, 0x0},
+ {0x9007f, 0x0},
+ {0x90080, 0x0},
+ {0x90081, 0x0},
+ {0x90082, 0x0},
+ {0x90083, 0x0},
+ {0x90084, 0x0},
+ {0x90085, 0x0},
+ {0x90086, 0x0},
+ {0x90087, 0x0},
+ {0x90088, 0x0},
+ {0x90089, 0x0},
+ {0x9008a, 0x0},
+ {0x9008b, 0x0},
+ {0x9008c, 0x0},
+ {0x9008d, 0x0},
+ {0x9008e, 0x0},
+ {0x9008f, 0x0},
+ {0x90090, 0x0},
+ {0x90091, 0x0},
+ {0x90092, 0x0},
+ {0x90093, 0x0},
+ {0x90094, 0x0},
+ {0x90095, 0x0},
+ {0x90096, 0x0},
+ {0x90097, 0x0},
+ {0x90098, 0x0},
+ {0x90099, 0x0},
+ {0x9009a, 0x0},
+ {0x9009b, 0x0},
+ {0x9009c, 0x0},
+ {0x9009d, 0x0},
+ {0x9009e, 0x0},
+ {0x9009f, 0x0},
+ {0x900a0, 0x0},
+ {0x900a1, 0x0},
+ {0x900a2, 0x0},
+ {0x900a3, 0x0},
+ {0x900a4, 0x0},
+ {0x900a5, 0x0},
+ {0x900a6, 0x0},
+ {0x900a7, 0x0},
+ {0x900a8, 0x0},
+ {0x900a9, 0x0},
+ {0x40000, 0x0},
+ {0x40020, 0x0},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x0},
+ {0x40021, 0x0},
+ {0x40041, 0x0},
+ {0x40061, 0x0},
+ {0x40002, 0x0},
+ {0x40022, 0x0},
+ {0x40042, 0x0},
+ {0x40062, 0x0},
+ {0x40003, 0x0},
+ {0x40023, 0x0},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x0},
+ {0x40024, 0x0},
+ {0x40044, 0x0},
+ {0x40064, 0x0},
+ {0x40005, 0x0},
+ {0x40025, 0x0},
+ {0x40045, 0x0},
+ {0x40065, 0x0},
+ {0x40006, 0x0},
+ {0x40026, 0x0},
+ {0x40046, 0x0},
+ {0x40066, 0x0},
+ {0x40007, 0x0},
+ {0x40027, 0x0},
+ {0x40047, 0x0},
+ {0x40067, 0x0},
+ {0x40008, 0x0},
+ {0x40028, 0x0},
+ {0x40048, 0x0},
+ {0x40068, 0x0},
+ {0x40009, 0x0},
+ {0x40029, 0x0},
+ {0x40049, 0x0},
+ {0x40069, 0x0},
+ {0x4000a, 0x0},
+ {0x4002a, 0x0},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x0},
+ {0x4002b, 0x0},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x0},
+ {0x4002c, 0x0},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0x0},
+ {0x4002d, 0x0},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x0},
+ {0x4002e, 0x0},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x0},
+ {0x4002f, 0x0},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x0},
+ {0x40030, 0x0},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x0},
+ {0x40031, 0x0},
+ {0x40051, 0x0},
+ {0x40071, 0x0},
+ {0x40012, 0x0},
+ {0x40032, 0x0},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x0},
+ {0x40033, 0x0},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x0},
+ {0x40034, 0x0},
+ {0x40054, 0x0},
+ {0x40074, 0x0},
+ {0x40015, 0x0},
+ {0x40035, 0x0},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x0},
+ {0x40036, 0x0},
+ {0x40056, 0x0},
+ {0x40076, 0x0},
+ {0x40017, 0x0},
+ {0x40037, 0x0},
+ {0x40057, 0x0},
+ {0x40077, 0x0},
+ {0x40018, 0x0},
+ {0x40038, 0x0},
+ {0x40058, 0x0},
+ {0x40078, 0x0},
+ {0x40019, 0x0},
+ {0x40039, 0x0},
+ {0x40059, 0x0},
+ {0x40079, 0x0},
+ {0x4001a, 0x0},
+ {0x4003a, 0x0},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x0},
+ {0x900ac, 0x0},
+ {0x900ad, 0x0},
+ {0x900ae, 0x0},
+ {0x900af, 0x0},
+ {0x900b0, 0x0},
+ {0x900b1, 0x0},
+ {0x900b2, 0x0},
+ {0x900b3, 0x0},
+ {0x900b4, 0x0},
+ {0x900b5, 0x0},
+ {0x900b6, 0x0},
+ {0x900b7, 0x0},
+ {0x900b8, 0x0},
+ {0x900b9, 0x0},
+ {0x900ba, 0x0},
+ {0x900bb, 0x0},
+ {0x900bc, 0x0},
+ {0x900bd, 0x0},
+ {0x900be, 0x0},
+ {0x900bf, 0x0},
+ {0x900c0, 0x0},
+ {0x900c1, 0x0},
+ {0x900c2, 0x0},
+ {0x900c3, 0x0},
+ {0x900c4, 0x0},
+ {0x900c5, 0x0},
+ {0x900c6, 0x0},
+ {0x900c7, 0x0},
+ {0x900c8, 0x0},
+ {0x900c9, 0x0},
+ {0x900ca, 0x0},
+ {0x900cb, 0x0},
+ {0x900cc, 0x0},
+ {0x900cd, 0x0},
+ {0x900ce, 0x0},
+ {0x900cf, 0x0},
+ {0x900d0, 0x0},
+ {0x900d1, 0x0},
+ {0x900d2, 0x0},
+ {0x900d3, 0x0},
+ {0x900d4, 0x0},
+ {0x900d5, 0x0},
+ {0x900d6, 0x0},
+ {0x900d7, 0x0},
+ {0x900d8, 0x0},
+ {0x900d9, 0x0},
+ {0x900da, 0x0},
+ {0x900db, 0x0},
+ {0x900dc, 0x0},
+ {0x900dd, 0x0},
+ {0x900de, 0x0},
+ {0x900df, 0x0},
+ {0x900e0, 0x0},
+ {0x900e1, 0x0},
+ {0x900e2, 0x0},
+ {0x900e3, 0x0},
+ {0x900e4, 0x0},
+ {0x900e5, 0x0},
+ {0x900e6, 0x0},
+ {0x900e7, 0x0},
+ {0x900e8, 0x0},
+ {0x900e9, 0x0},
+ {0x900ea, 0x0},
+ {0x900eb, 0x0},
+ {0x900ec, 0x0},
+ {0x900ed, 0x0},
+ {0x900ee, 0x0},
+ {0x900ef, 0x0},
+ {0x900f0, 0x0},
+ {0x900f1, 0x0},
+ {0x900f2, 0x0},
+ {0x900f3, 0x0},
+ {0x900f4, 0x0},
+ {0x900f5, 0x0},
+ {0x900f6, 0x0},
+ {0x900f7, 0x0},
+ {0x900f8, 0x0},
+ {0x900f9, 0x0},
+ {0x900fa, 0x0},
+ {0x900fb, 0x0},
+ {0x900fc, 0x0},
+ {0x900fd, 0x0},
+ {0x900fe, 0x0},
+ {0x900ff, 0x0},
+ {0x90100, 0x0},
+ {0x90101, 0x0},
+ {0x90102, 0x0},
+ {0x90103, 0x0},
+ {0x90104, 0x0},
+ {0x90105, 0x0},
+ {0x90106, 0x0},
+ {0x90107, 0x0},
+ {0x90108, 0x0},
+ {0x90109, 0x0},
+ {0x9010a, 0x0},
+ {0x9010b, 0x0},
+ {0x9010c, 0x0},
+ {0x9010d, 0x0},
+ {0x9010e, 0x0},
+ {0x9010f, 0x0},
+ {0x90110, 0x0},
+ {0x90111, 0x0},
+ {0x90112, 0x0},
+ {0x90113, 0x0},
+ {0x90114, 0x0},
+ {0x90115, 0x0},
+ {0x90116, 0x0},
+ {0x90117, 0x0},
+ {0x90118, 0x0},
+ {0x90119, 0x0},
+ {0x9011a, 0x0},
+ {0x9011b, 0x0},
+ {0x9011c, 0x0},
+ {0x9011d, 0x0},
+ {0x9011e, 0x0},
+ {0x9011f, 0x0},
+ {0x90120, 0x0},
+ {0x90121, 0x0},
+ {0x90122, 0x0},
+ {0x90123, 0x0},
+ {0x90124, 0x0},
+ {0x90125, 0x0},
+ {0x90126, 0x0},
+ {0x90127, 0x0},
+ {0x90128, 0x0},
+ {0x90129, 0x0},
+ {0x9012a, 0x0},
+ {0x9012b, 0x0},
+ {0x9012c, 0x0},
+ {0x9012d, 0x0},
+ {0x9012e, 0x0},
+ {0x9012f, 0x0},
+ {0x90130, 0x0},
+ {0x90131, 0x0},
+ {0x90132, 0x0},
+ {0x90133, 0x0},
+ {0x90134, 0x0},
+ {0x90135, 0x0},
+ {0x90136, 0x0},
+ {0x90137, 0x0},
+ {0x90138, 0x0},
+ {0x90139, 0x0},
+ {0x9013a, 0x0},
+ {0x9013b, 0x0},
+ {0x9013c, 0x0},
+ {0x9013d, 0x0},
+ {0x9013e, 0x0},
+ {0x9013f, 0x0},
+ {0x90140, 0x0},
+ {0x90141, 0x0},
+ {0x90142, 0x0},
+ {0x90143, 0x0},
+ {0x90144, 0x0},
+ {0x90145, 0x0},
+ {0x90146, 0x0},
+ {0x90147, 0x0},
+ {0x90148, 0x0},
+ {0x90149, 0x0},
+ {0x9014a, 0x0},
+ {0x9014b, 0x0},
+ {0x9014c, 0x0},
+ {0x9014d, 0x0},
+ {0x9014e, 0x0},
+ {0x9014f, 0x0},
+ {0x90150, 0x0},
+ {0x90151, 0x0},
+ {0x90152, 0x0},
+ {0x90153, 0x0},
+ {0x90154, 0x0},
+ {0x90155, 0x0},
+ {0x90156, 0x0},
+ {0x90157, 0x0},
+ {0x90158, 0x0},
+ {0x90159, 0x0},
+ {0x9015a, 0x0},
+ {0x9015b, 0x0},
+ {0x9015c, 0x0},
+ {0x9015d, 0x0},
+ {0x9015e, 0x0},
+ {0x9015f, 0x0},
+ {0x90160, 0x0},
+ {0x90161, 0x0},
+ {0x90162, 0x0},
+ {0x90163, 0x0},
+ {0x90164, 0x0},
+ {0x90165, 0x0},
+ {0x90166, 0x0},
+ {0x90167, 0x0},
+ {0x90168, 0x0},
+ {0x90169, 0x0},
+ {0x9016a, 0x0},
+ {0x9016b, 0x0},
+ {0x9016c, 0x0},
+ {0x9016d, 0x0},
+ {0x9016e, 0x0},
+ {0x9016f, 0x0},
+ {0x90170, 0x0},
+ {0x90171, 0x0},
+ {0x90172, 0x0},
+ {0x90173, 0x0},
+ {0x90174, 0x0},
+ {0x90175, 0x0},
+ {0x90176, 0x0},
+ {0x90177, 0x0},
+ {0x90178, 0x0},
+ {0x90179, 0x0},
+ {0x9017a, 0x0},
+ {0x9017b, 0x0},
+ {0x9017c, 0x0},
+ {0x9017d, 0x0},
+ {0x9017e, 0x0},
+ {0x9017f, 0x0},
+ {0x90180, 0x0},
+ {0x90181, 0x0},
+ {0x90182, 0x0},
+ {0x90183, 0x0},
+ {0x90184, 0x0},
+ {0x90006, 0x0},
+ {0x90007, 0x0},
+ {0x90008, 0x0},
+ {0x90009, 0x0},
+ {0x9000a, 0x0},
+ {0x9000b, 0x0},
+ {0xd00e7, 0x0},
+ {0x90017, 0x0},
+ {0x9001f, 0x0},
+ {0x90026, 0x0},
+ {0x400d0, 0x0},
+ {0x400d1, 0x0},
+ {0x400d2, 0x0},
+ {0x400d3, 0x0},
+ {0x400d4, 0x0},
+ {0x400d5, 0x0},
+ {0x400d6, 0x0},
+ {0x400d7, 0x0},
+ {0x200be, 0x0},
+ {0x2000b, 0x0},
+ {0x2000c, 0x0},
+ {0x2000d, 0x0},
+ {0x2000e, 0x0},
+ {0x12000b, 0x0},
+ {0x12000c, 0x0},
+ {0x12000d, 0x0},
+ {0x12000e, 0x0},
+ {0x22000b, 0x0},
+ {0x22000c, 0x0},
+ {0x22000d, 0x0},
+ {0x22000e, 0x0},
+ {0x9000c, 0x0},
+ {0x9000d, 0x0},
+ {0x9000e, 0x0},
+ {0x9000f, 0x0},
+ {0x90010, 0x0},
+ {0x90011, 0x0},
+ {0x90012, 0x0},
+ {0x90013, 0x0},
+ {0x20010, 0x0},
+ {0x20011, 0x0},
+ {0x120010, 0x0},
+ {0x120011, 0x0},
+ {0x40080, 0x0},
+ {0x40081, 0x0},
+ {0x40082, 0x0},
+ {0x40083, 0x0},
+ {0x40084, 0x0},
+ {0x40085, 0x0},
+ {0x140080, 0x0},
+ {0x140081, 0x0},
+ {0x140082, 0x0},
+ {0x140083, 0x0},
+ {0x140084, 0x0},
+ {0x140085, 0x0},
+ {0x240080, 0x0},
+ {0x240081, 0x0},
+ {0x240082, 0x0},
+ {0x240083, 0x0},
+ {0x240084, 0x0},
+ {0x240085, 0x0},
+ {0x400fd, 0x0},
+ {0x400f1, 0x0},
+ {0x10011, 0x0},
+ {0x10012, 0x0},
+ {0x10013, 0x0},
+ {0x10018, 0x0},
+ {0x10002, 0x0},
+ {0x100b2, 0x0},
+ {0x101b4, 0x0},
+ {0x102b4, 0x0},
+ {0x103b4, 0x0},
+ {0x104b4, 0x0},
+ {0x105b4, 0x0},
+ {0x106b4, 0x0},
+ {0x107b4, 0x0},
+ {0x108b4, 0x0},
+ {0x11011, 0x0},
+ {0x11012, 0x0},
+ {0x11013, 0x0},
+ {0x11018, 0x0},
+ {0x11002, 0x0},
+ {0x110b2, 0x0},
+ {0x111b4, 0x0},
+ {0x112b4, 0x0},
+ {0x113b4, 0x0},
+ {0x114b4, 0x0},
+ {0x115b4, 0x0},
+ {0x116b4, 0x0},
+ {0x117b4, 0x0},
+ {0x118b4, 0x0},
+ {0x20089, 0x0},
+ {0xc0080, 0x0},
+ {0x200cb, 0x0},
+ {0x10068, 0x0},
+ {0x10069, 0x0},
+ {0x10168, 0x0},
+ {0x10169, 0x0},
+ {0x10268, 0x0},
+ {0x10269, 0x0},
+ {0x10368, 0x0},
+ {0x10369, 0x0},
+ {0x10468, 0x0},
+ {0x10469, 0x0},
+ {0x10568, 0x0},
+ {0x10569, 0x0},
+ {0x10668, 0x0},
+ {0x10669, 0x0},
+ {0x10768, 0x0},
+ {0x10769, 0x0},
+ {0x10868, 0x0},
+ {0x10869, 0x0},
+ {0x100aa, 0x0},
+ {0x10062, 0x0},
+ {0x10001, 0x0},
+ {0x100a0, 0x0},
+ {0x100a1, 0x0},
+ {0x100a2, 0x0},
+ {0x100a3, 0x0},
+ {0x100a4, 0x0},
+ {0x100a5, 0x0},
+ {0x100a6, 0x0},
+ {0x100a7, 0x0},
+ {0x11068, 0x0},
+ {0x11069, 0x0},
+ {0x11168, 0x0},
+ {0x11169, 0x0},
+ {0x11268, 0x0},
+ {0x11269, 0x0},
+ {0x11368, 0x0},
+ {0x11369, 0x0},
+ {0x11468, 0x0},
+ {0x11469, 0x0},
+ {0x11568, 0x0},
+ {0x11569, 0x0},
+ {0x11668, 0x0},
+ {0x11669, 0x0},
+ {0x11768, 0x0},
+ {0x11769, 0x0},
+ {0x11868, 0x0},
+ {0x11869, 0x0},
+ {0x110aa, 0x0},
+ {0x11062, 0x0},
+ {0x11001, 0x0},
+ {0x110a0, 0x0},
+ {0x110a1, 0x0},
+ {0x110a2, 0x0},
+ {0x110a3, 0x0},
+ {0x110a4, 0x0},
+ {0x110a5, 0x0},
+ {0x110a6, 0x0},
+ {0x110a7, 0x0},
+ {0x80, 0x0},
+ {0x1080, 0x0},
+ {0x2080, 0x0},
+ {0x10020, 0x0},
+ {0x10080, 0x0},
+ {0x10081, 0x0},
+ {0x100d0, 0x0},
+ {0x100d1, 0x0},
+ {0x1008c, 0x0},
+ {0x1008d, 0x0},
+ {0x10180, 0x0},
+ {0x10181, 0x0},
+ {0x101d0, 0x0},
+ {0x101d1, 0x0},
+ {0x1018c, 0x0},
+ {0x1018d, 0x0},
+ {0x100c0, 0x0},
+ {0x100c1, 0x0},
+ {0x101c0, 0x0},
+ {0x101c1, 0x0},
+ {0x102c0, 0x0},
+ {0x102c1, 0x0},
+ {0x103c0, 0x0},
+ {0x103c1, 0x0},
+ {0x104c0, 0x0},
+ {0x104c1, 0x0},
+ {0x105c0, 0x0},
+ {0x105c1, 0x0},
+ {0x106c0, 0x0},
+ {0x106c1, 0x0},
+ {0x107c0, 0x0},
+ {0x107c1, 0x0},
+ {0x108c0, 0x0},
+ {0x108c1, 0x0},
+ {0x100ae, 0x0},
+ {0x100af, 0x0},
+ {0x11020, 0x0},
+ {0x11080, 0x0},
+ {0x11081, 0x0},
+ {0x110d0, 0x0},
+ {0x110d1, 0x0},
+ {0x1108c, 0x0},
+ {0x1108d, 0x0},
+ {0x11180, 0x0},
+ {0x11181, 0x0},
+ {0x111d0, 0x0},
+ {0x111d1, 0x0},
+ {0x1118c, 0x0},
+ {0x1118d, 0x0},
+ {0x110c0, 0x0},
+ {0x110c1, 0x0},
+ {0x111c0, 0x0},
+ {0x111c1, 0x0},
+ {0x112c0, 0x0},
+ {0x112c1, 0x0},
+ {0x113c0, 0x0},
+ {0x113c1, 0x0},
+ {0x114c0, 0x0},
+ {0x114c1, 0x0},
+ {0x115c0, 0x0},
+ {0x115c1, 0x0},
+ {0x116c0, 0x0},
+ {0x116c1, 0x0},
+ {0x117c0, 0x0},
+ {0x117c1, 0x0},
+ {0x118c0, 0x0},
+ {0x118c1, 0x0},
+ {0x110ae, 0x0},
+ {0x110af, 0x0},
+ {0x90201, 0x0},
+ {0x90202, 0x0},
+ {0x90203, 0x0},
+ {0x90205, 0x0},
+ {0x90206, 0x0},
+ {0x90207, 0x0},
+ {0x90208, 0x0},
+ {0x20020, 0x0},
+ {0x100080, 0x0},
+ {0x101080, 0x0},
+ {0x102080, 0x0},
+ {0x110020, 0x0},
+ {0x110080, 0x0},
+ {0x110081, 0x0},
+ {0x1100d0, 0x0},
+ {0x1100d1, 0x0},
+ {0x11008c, 0x0},
+ {0x11008d, 0x0},
+ {0x110180, 0x0},
+ {0x110181, 0x0},
+ {0x1101d0, 0x0},
+ {0x1101d1, 0x0},
+ {0x11018c, 0x0},
+ {0x11018d, 0x0},
+ {0x1100c0, 0x0},
+ {0x1100c1, 0x0},
+ {0x1101c0, 0x0},
+ {0x1101c1, 0x0},
+ {0x1102c0, 0x0},
+ {0x1102c1, 0x0},
+ {0x1103c0, 0x0},
+ {0x1103c1, 0x0},
+ {0x1104c0, 0x0},
+ {0x1104c1, 0x0},
+ {0x1105c0, 0x0},
+ {0x1105c1, 0x0},
+ {0x1106c0, 0x0},
+ {0x1106c1, 0x0},
+ {0x1107c0, 0x0},
+ {0x1107c1, 0x0},
+ {0x1108c0, 0x0},
+ {0x1108c1, 0x0},
+ {0x1100ae, 0x0},
+ {0x1100af, 0x0},
+ {0x111020, 0x0},
+ {0x111080, 0x0},
+ {0x111081, 0x0},
+ {0x1110d0, 0x0},
+ {0x1110d1, 0x0},
+ {0x11108c, 0x0},
+ {0x11108d, 0x0},
+ {0x111180, 0x0},
+ {0x111181, 0x0},
+ {0x1111d0, 0x0},
+ {0x1111d1, 0x0},
+ {0x11118c, 0x0},
+ {0x11118d, 0x0},
+ {0x1110c0, 0x0},
+ {0x1110c1, 0x0},
+ {0x1111c0, 0x0},
+ {0x1111c1, 0x0},
+ {0x1112c0, 0x0},
+ {0x1112c1, 0x0},
+ {0x1113c0, 0x0},
+ {0x1113c1, 0x0},
+ {0x1114c0, 0x0},
+ {0x1114c1, 0x0},
+ {0x1115c0, 0x0},
+ {0x1115c1, 0x0},
+ {0x1116c0, 0x0},
+ {0x1116c1, 0x0},
+ {0x1117c0, 0x0},
+ {0x1117c1, 0x0},
+ {0x1118c0, 0x0},
+ {0x1118c1, 0x0},
+ {0x1110ae, 0x0},
+ {0x1110af, 0x0},
+ {0x190201, 0x0},
+ {0x190202, 0x0},
+ {0x190203, 0x0},
+ {0x190205, 0x0},
+ {0x190206, 0x0},
+ {0x190207, 0x0},
+ {0x190208, 0x0},
+ {0x120020, 0x0},
+ {0x200080, 0x0},
+ {0x201080, 0x0},
+ {0x202080, 0x0},
+ {0x210020, 0x0},
+ {0x210080, 0x0},
+ {0x210081, 0x0},
+ {0x2100d0, 0x0},
+ {0x2100d1, 0x0},
+ {0x21008c, 0x0},
+ {0x21008d, 0x0},
+ {0x210180, 0x0},
+ {0x210181, 0x0},
+ {0x2101d0, 0x0},
+ {0x2101d1, 0x0},
+ {0x21018c, 0x0},
+ {0x21018d, 0x0},
+ {0x2100c0, 0x0},
+ {0x2100c1, 0x0},
+ {0x2101c0, 0x0},
+ {0x2101c1, 0x0},
+ {0x2102c0, 0x0},
+ {0x2102c1, 0x0},
+ {0x2103c0, 0x0},
+ {0x2103c1, 0x0},
+ {0x2104c0, 0x0},
+ {0x2104c1, 0x0},
+ {0x2105c0, 0x0},
+ {0x2105c1, 0x0},
+ {0x2106c0, 0x0},
+ {0x2106c1, 0x0},
+ {0x2107c0, 0x0},
+ {0x2107c1, 0x0},
+ {0x2108c0, 0x0},
+ {0x2108c1, 0x0},
+ {0x2100ae, 0x0},
+ {0x2100af, 0x0},
+ {0x211020, 0x0},
+ {0x211080, 0x0},
+ {0x211081, 0x0},
+ {0x2110d0, 0x0},
+ {0x2110d1, 0x0},
+ {0x21108c, 0x0},
+ {0x21108d, 0x0},
+ {0x211180, 0x0},
+ {0x211181, 0x0},
+ {0x2111d0, 0x0},
+ {0x2111d1, 0x0},
+ {0x21118c, 0x0},
+ {0x21118d, 0x0},
+ {0x2110c0, 0x0},
+ {0x2110c1, 0x0},
+ {0x2111c0, 0x0},
+ {0x2111c1, 0x0},
+ {0x2112c0, 0x0},
+ {0x2112c1, 0x0},
+ {0x2113c0, 0x0},
+ {0x2113c1, 0x0},
+ {0x2114c0, 0x0},
+ {0x2114c1, 0x0},
+ {0x2115c0, 0x0},
+ {0x2115c1, 0x0},
+ {0x2116c0, 0x0},
+ {0x2116c1, 0x0},
+ {0x2117c0, 0x0},
+ {0x2117c1, 0x0},
+ {0x2118c0, 0x0},
+ {0x2118c1, 0x0},
+ {0x2110ae, 0x0},
+ {0x2110af, 0x0},
+ {0x290201, 0x0},
+ {0x290202, 0x0},
+ {0x290203, 0x0},
+ {0x290205, 0x0},
+ {0x290206, 0x0},
+ {0x290207, 0x0},
+ {0x290208, 0x0},
+ {0x220020, 0x0},
+ {0x20077, 0x0},
+ {0x20072, 0x0},
+ {0x20073, 0x0},
+ {0x400c0, 0x0},
+ {0x10040, 0x0},
+ {0x10140, 0x0},
+ {0x10240, 0x0},
+ {0x10340, 0x0},
+ {0x10440, 0x0},
+ {0x10540, 0x0},
+ {0x10640, 0x0},
+ {0x10740, 0x0},
+ {0x10840, 0x0},
+ {0x11040, 0x0},
+ {0x11140, 0x0},
+ {0x11240, 0x0},
+ {0x11340, 0x0},
+ {0x11440, 0x0},
+ {0x11540, 0x0},
+ {0x11640, 0x0},
+ {0x11740, 0x0},
+ {0x11840, 0x0},
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x640},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x131f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P1 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x1},
+ {0x54003, 0x320},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P2 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x102},
+ {0x54003, 0x270},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4800},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4800},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x11},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x11},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x640},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x61},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54010, 0x2080},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+ {0xd0000, 0x0},
+ {0x90000, 0x10},
+ {0x90001, 0x400},
+ {0x90002, 0x10e},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x8},
+ {0x90029, 0xb},
+ {0x9002a, 0x480},
+ {0x9002b, 0x109},
+ {0x9002c, 0x8},
+ {0x9002d, 0x448},
+ {0x9002e, 0x139},
+ {0x9002f, 0x8},
+ {0x90030, 0x478},
+ {0x90031, 0x109},
+ {0x90032, 0x0},
+ {0x90033, 0xe8},
+ {0x90034, 0x109},
+ {0x90035, 0x2},
+ {0x90036, 0x10},
+ {0x90037, 0x139},
+ {0x90038, 0xb},
+ {0x90039, 0x7c0},
+ {0x9003a, 0x139},
+ {0x9003b, 0x44},
+ {0x9003c, 0x633},
+ {0x9003d, 0x159},
+ {0x9003e, 0x14f},
+ {0x9003f, 0x630},
+ {0x90040, 0x159},
+ {0x90041, 0x47},
+ {0x90042, 0x633},
+ {0x90043, 0x149},
+ {0x90044, 0x4f},
+ {0x90045, 0x633},
+ {0x90046, 0x179},
+ {0x90047, 0x8},
+ {0x90048, 0xe0},
+ {0x90049, 0x109},
+ {0x9004a, 0x0},
+ {0x9004b, 0x7c8},
+ {0x9004c, 0x109},
+ {0x9004d, 0x0},
+ {0x9004e, 0x1},
+ {0x9004f, 0x8},
+ {0x90050, 0x30},
+ {0x90051, 0x65a},
+ {0x90052, 0x9},
+ {0x90053, 0x0},
+ {0x90054, 0x45a},
+ {0x90055, 0x9},
+ {0x90056, 0x0},
+ {0x90057, 0x448},
+ {0x90058, 0x109},
+ {0x90059, 0x40},
+ {0x9005a, 0x633},
+ {0x9005b, 0x179},
+ {0x9005c, 0x1},
+ {0x9005d, 0x618},
+ {0x9005e, 0x109},
+ {0x9005f, 0x40c0},
+ {0x90060, 0x633},
+ {0x90061, 0x149},
+ {0x90062, 0x8},
+ {0x90063, 0x4},
+ {0x90064, 0x48},
+ {0x90065, 0x4040},
+ {0x90066, 0x633},
+ {0x90067, 0x149},
+ {0x90068, 0x0},
+ {0x90069, 0x4},
+ {0x9006a, 0x48},
+ {0x9006b, 0x40},
+ {0x9006c, 0x633},
+ {0x9006d, 0x149},
+ {0x9006e, 0x0},
+ {0x9006f, 0x658},
+ {0x90070, 0x109},
+ {0x90071, 0x10},
+ {0x90072, 0x4},
+ {0x90073, 0x18},
+ {0x90074, 0x0},
+ {0x90075, 0x4},
+ {0x90076, 0x78},
+ {0x90077, 0x549},
+ {0x90078, 0x633},
+ {0x90079, 0x159},
+ {0x9007a, 0xd49},
+ {0x9007b, 0x633},
+ {0x9007c, 0x159},
+ {0x9007d, 0x94a},
+ {0x9007e, 0x633},
+ {0x9007f, 0x159},
+ {0x90080, 0x441},
+ {0x90081, 0x633},
+ {0x90082, 0x149},
+ {0x90083, 0x42},
+ {0x90084, 0x633},
+ {0x90085, 0x149},
+ {0x90086, 0x1},
+ {0x90087, 0x633},
+ {0x90088, 0x149},
+ {0x90089, 0x0},
+ {0x9008a, 0xe0},
+ {0x9008b, 0x109},
+ {0x9008c, 0xa},
+ {0x9008d, 0x10},
+ {0x9008e, 0x109},
+ {0x9008f, 0x9},
+ {0x90090, 0x3c0},
+ {0x90091, 0x149},
+ {0x90092, 0x9},
+ {0x90093, 0x3c0},
+ {0x90094, 0x159},
+ {0x90095, 0x18},
+ {0x90096, 0x10},
+ {0x90097, 0x109},
+ {0x90098, 0x0},
+ {0x90099, 0x3c0},
+ {0x9009a, 0x109},
+ {0x9009b, 0x18},
+ {0x9009c, 0x4},
+ {0x9009d, 0x48},
+ {0x9009e, 0x18},
+ {0x9009f, 0x4},
+ {0x900a0, 0x58},
+ {0x900a1, 0xb},
+ {0x900a2, 0x10},
+ {0x900a3, 0x109},
+ {0x900a4, 0x1},
+ {0x900a5, 0x10},
+ {0x900a6, 0x109},
+ {0x900a7, 0x5},
+ {0x900a8, 0x7c0},
+ {0x900a9, 0x109},
+ {0x40000, 0x811},
+ {0x40020, 0x880},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x4008},
+ {0x40021, 0x83},
+ {0x40041, 0x4f},
+ {0x40061, 0x0},
+ {0x40002, 0x4040},
+ {0x40022, 0x83},
+ {0x40042, 0x51},
+ {0x40062, 0x0},
+ {0x40003, 0x811},
+ {0x40023, 0x880},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x720},
+ {0x40024, 0xf},
+ {0x40044, 0x1740},
+ {0x40064, 0x0},
+ {0x40005, 0x16},
+ {0x40025, 0x83},
+ {0x40045, 0x4b},
+ {0x40065, 0x0},
+ {0x40006, 0x716},
+ {0x40026, 0xf},
+ {0x40046, 0x2001},
+ {0x40066, 0x0},
+ {0x40007, 0x716},
+ {0x40027, 0xf},
+ {0x40047, 0x2800},
+ {0x40067, 0x0},
+ {0x40008, 0x716},
+ {0x40028, 0xf},
+ {0x40048, 0xf00},
+ {0x40068, 0x0},
+ {0x40009, 0x720},
+ {0x40029, 0xf},
+ {0x40049, 0x1400},
+ {0x40069, 0x0},
+ {0x4000a, 0xe08},
+ {0x4002a, 0xc15},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x625},
+ {0x4002b, 0x15},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x4028},
+ {0x4002c, 0x80},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0xe08},
+ {0x4002d, 0xc1a},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x625},
+ {0x4002e, 0x1a},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x4040},
+ {0x4002f, 0x80},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x2604},
+ {0x40030, 0x15},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x708},
+ {0x40031, 0x5},
+ {0x40051, 0x0},
+ {0x40071, 0x2002},
+ {0x40012, 0x8},
+ {0x40032, 0x80},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x2604},
+ {0x40033, 0x1a},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x708},
+ {0x40034, 0xa},
+ {0x40054, 0x0},
+ {0x40074, 0x2002},
+ {0x40015, 0x4040},
+ {0x40035, 0x80},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x60a},
+ {0x40036, 0x15},
+ {0x40056, 0x1200},
+ {0x40076, 0x0},
+ {0x40017, 0x61a},
+ {0x40037, 0x15},
+ {0x40057, 0x1300},
+ {0x40077, 0x0},
+ {0x40018, 0x60a},
+ {0x40038, 0x1a},
+ {0x40058, 0x1200},
+ {0x40078, 0x0},
+ {0x40019, 0x642},
+ {0x40039, 0x1a},
+ {0x40059, 0x1300},
+ {0x40079, 0x0},
+ {0x4001a, 0x4808},
+ {0x4003a, 0x880},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x790},
+ {0x900ac, 0x11a},
+ {0x900ad, 0x8},
+ {0x900ae, 0x7aa},
+ {0x900af, 0x2a},
+ {0x900b0, 0x10},
+ {0x900b1, 0x7b2},
+ {0x900b2, 0x2a},
+ {0x900b3, 0x0},
+ {0x900b4, 0x7c8},
+ {0x900b5, 0x109},
+ {0x900b6, 0x10},
+ {0x900b7, 0x10},
+ {0x900b8, 0x109},
+ {0x900b9, 0x10},
+ {0x900ba, 0x2a8},
+ {0x900bb, 0x129},
+ {0x900bc, 0x8},
+ {0x900bd, 0x370},
+ {0x900be, 0x129},
+ {0x900bf, 0xa},
+ {0x900c0, 0x3c8},
+ {0x900c1, 0x1a9},
+ {0x900c2, 0xc},
+ {0x900c3, 0x408},
+ {0x900c4, 0x199},
+ {0x900c5, 0x14},
+ {0x900c6, 0x790},
+ {0x900c7, 0x11a},
+ {0x900c8, 0x8},
+ {0x900c9, 0x4},
+ {0x900ca, 0x18},
+ {0x900cb, 0xe},
+ {0x900cc, 0x408},
+ {0x900cd, 0x199},
+ {0x900ce, 0x8},
+ {0x900cf, 0x8568},
+ {0x900d0, 0x108},
+ {0x900d1, 0x18},
+ {0x900d2, 0x790},
+ {0x900d3, 0x16a},
+ {0x900d4, 0x8},
+ {0x900d5, 0x1d8},
+ {0x900d6, 0x169},
+ {0x900d7, 0x10},
+ {0x900d8, 0x8558},
+ {0x900d9, 0x168},
+ {0x900da, 0x1ff8},
+ {0x900db, 0x85a8},
+ {0x900dc, 0x1e8},
+ {0x900dd, 0x50},
+ {0x900de, 0x798},
+ {0x900df, 0x16a},
+ {0x900e0, 0x60},
+ {0x900e1, 0x7a0},
+ {0x900e2, 0x16a},
+ {0x900e3, 0x8},
+ {0x900e4, 0x8310},
+ {0x900e5, 0x168},
+ {0x900e6, 0x8},
+ {0x900e7, 0xa310},
+ {0x900e8, 0x168},
+ {0x900e9, 0xa},
+ {0x900ea, 0x408},
+ {0x900eb, 0x169},
+ {0x900ec, 0x6e},
+ {0x900ed, 0x0},
+ {0x900ee, 0x68},
+ {0x900ef, 0x0},
+ {0x900f0, 0x408},
+ {0x900f1, 0x169},
+ {0x900f2, 0x0},
+ {0x900f3, 0x8310},
+ {0x900f4, 0x168},
+ {0x900f5, 0x0},
+ {0x900f6, 0xa310},
+ {0x900f7, 0x168},
+ {0x900f8, 0x1ff8},
+ {0x900f9, 0x85a8},
+ {0x900fa, 0x1e8},
+ {0x900fb, 0x68},
+ {0x900fc, 0x798},
+ {0x900fd, 0x16a},
+ {0x900fe, 0x78},
+ {0x900ff, 0x7a0},
+ {0x90100, 0x16a},
+ {0x90101, 0x68},
+ {0x90102, 0x790},
+ {0x90103, 0x16a},
+ {0x90104, 0x8},
+ {0x90105, 0x8b10},
+ {0x90106, 0x168},
+ {0x90107, 0x8},
+ {0x90108, 0xab10},
+ {0x90109, 0x168},
+ {0x9010a, 0xa},
+ {0x9010b, 0x408},
+ {0x9010c, 0x169},
+ {0x9010d, 0x58},
+ {0x9010e, 0x0},
+ {0x9010f, 0x68},
+ {0x90110, 0x0},
+ {0x90111, 0x408},
+ {0x90112, 0x169},
+ {0x90113, 0x0},
+ {0x90114, 0x8b10},
+ {0x90115, 0x168},
+ {0x90116, 0x1},
+ {0x90117, 0xab10},
+ {0x90118, 0x168},
+ {0x90119, 0x0},
+ {0x9011a, 0x1d8},
+ {0x9011b, 0x169},
+ {0x9011c, 0x80},
+ {0x9011d, 0x790},
+ {0x9011e, 0x16a},
+ {0x9011f, 0x18},
+ {0x90120, 0x7aa},
+ {0x90121, 0x6a},
+ {0x90122, 0xa},
+ {0x90123, 0x0},
+ {0x90124, 0x1e9},
+ {0x90125, 0x8},
+ {0x90126, 0x8080},
+ {0x90127, 0x108},
+ {0x90128, 0xf},
+ {0x90129, 0x408},
+ {0x9012a, 0x169},
+ {0x9012b, 0xc},
+ {0x9012c, 0x0},
+ {0x9012d, 0x68},
+ {0x9012e, 0x9},
+ {0x9012f, 0x0},
+ {0x90130, 0x1a9},
+ {0x90131, 0x0},
+ {0x90132, 0x408},
+ {0x90133, 0x169},
+ {0x90134, 0x0},
+ {0x90135, 0x8080},
+ {0x90136, 0x108},
+ {0x90137, 0x8},
+ {0x90138, 0x7aa},
+ {0x90139, 0x6a},
+ {0x9013a, 0x0},
+ {0x9013b, 0x8568},
+ {0x9013c, 0x108},
+ {0x9013d, 0xb7},
+ {0x9013e, 0x790},
+ {0x9013f, 0x16a},
+ {0x90140, 0x1f},
+ {0x90141, 0x0},
+ {0x90142, 0x68},
+ {0x90143, 0x8},
+ {0x90144, 0x8558},
+ {0x90145, 0x168},
+ {0x90146, 0xf},
+ {0x90147, 0x408},
+ {0x90148, 0x169},
+ {0x90149, 0xd},
+ {0x9014a, 0x0},
+ {0x9014b, 0x68},
+ {0x9014c, 0x0},
+ {0x9014d, 0x408},
+ {0x9014e, 0x169},
+ {0x9014f, 0x0},
+ {0x90150, 0x8558},
+ {0x90151, 0x168},
+ {0x90152, 0x8},
+ {0x90153, 0x3c8},
+ {0x90154, 0x1a9},
+ {0x90155, 0x3},
+ {0x90156, 0x370},
+ {0x90157, 0x129},
+ {0x90158, 0x20},
+ {0x90159, 0x2aa},
+ {0x9015a, 0x9},
+ {0x9015b, 0x8},
+ {0x9015c, 0xe8},
+ {0x9015d, 0x109},
+ {0x9015e, 0x0},
+ {0x9015f, 0x8140},
+ {0x90160, 0x10c},
+ {0x90161, 0x10},
+ {0x90162, 0x8138},
+ {0x90163, 0x104},
+ {0x90164, 0x8},
+ {0x90165, 0x448},
+ {0x90166, 0x109},
+ {0x90167, 0xf},
+ {0x90168, 0x7c0},
+ {0x90169, 0x109},
+ {0x9016a, 0x0},
+ {0x9016b, 0xe8},
+ {0x9016c, 0x109},
+ {0x9016d, 0x47},
+ {0x9016e, 0x630},
+ {0x9016f, 0x109},
+ {0x90170, 0x8},
+ {0x90171, 0x618},
+ {0x90172, 0x109},
+ {0x90173, 0x8},
+ {0x90174, 0xe0},
+ {0x90175, 0x109},
+ {0x90176, 0x0},
+ {0x90177, 0x7c8},
+ {0x90178, 0x109},
+ {0x90179, 0x8},
+ {0x9017a, 0x8140},
+ {0x9017b, 0x10c},
+ {0x9017c, 0x0},
+ {0x9017d, 0x478},
+ {0x9017e, 0x109},
+ {0x9017f, 0x0},
+ {0x90180, 0x1},
+ {0x90181, 0x8},
+ {0x90182, 0x8},
+ {0x90183, 0x4},
+ {0x90184, 0x0},
+ {0x90006, 0x8},
+ {0x90007, 0x7c8},
+ {0x90008, 0x109},
+ {0x90009, 0x0},
+ {0x9000a, 0x400},
+ {0x9000b, 0x106},
+ {0xd00e7, 0x400},
+ {0x90017, 0x0},
+ {0x9001f, 0x2b},
+ {0x90026, 0x69},
+ {0x400d0, 0x0},
+ {0x400d1, 0x101},
+ {0x400d2, 0x105},
+ {0x400d3, 0x107},
+ {0x400d4, 0x10f},
+ {0x400d5, 0x202},
+ {0x400d6, 0x20a},
+ {0x400d7, 0x20b},
+ {0x2003a, 0x2},
+ {0x200be, 0x3},
+ {0x2000b, 0x1c2},
+ {0x2000c, 0x64},
+ {0x2000d, 0x3e8},
+ {0x2000e, 0x2c},
+ {0x12000b, 0xe1},
+ {0x12000c, 0x32},
+ {0x12000d, 0x1f4},
+ {0x12000e, 0x10},
+ {0x22000b, 0xb0},
+ {0x22000c, 0x27},
+ {0x22000d, 0x186},
+ {0x22000e, 0x10},
+ {0x9000c, 0x0},
+ {0x9000d, 0x173},
+ {0x9000e, 0x60},
+ {0x9000f, 0x6110},
+ {0x90010, 0x2152},
+ {0x90011, 0xdfbd},
+ {0x90012, 0x2060},
+ {0x90013, 0x6152},
+ {0x20010, 0x5a},
+ {0x20011, 0x3},
+ {0x120010, 0x5a},
+ {0x120011, 0x3},
+ {0x40080, 0xe0},
+ {0x40081, 0x12},
+ {0x40082, 0xe0},
+ {0x40083, 0x12},
+ {0x40084, 0xe0},
+ {0x40085, 0x12},
+ {0x140080, 0xe0},
+ {0x140081, 0x12},
+ {0x140082, 0xe0},
+ {0x140083, 0x12},
+ {0x140084, 0xe0},
+ {0x140085, 0x12},
+ {0x240080, 0xe0},
+ {0x240081, 0x12},
+ {0x240082, 0xe0},
+ {0x240083, 0x12},
+ {0x240084, 0xe0},
+ {0x240085, 0x12},
+ {0x400fd, 0xf},
+ {0x400f1, 0xe},
+ {0x10011, 0x1},
+ {0x10012, 0x1},
+ {0x10013, 0x180},
+ {0x10018, 0x1},
+ {0x10002, 0x6209},
+ {0x100b2, 0x1},
+ {0x101b4, 0x1},
+ {0x102b4, 0x1},
+ {0x103b4, 0x1},
+ {0x104b4, 0x1},
+ {0x105b4, 0x1},
+ {0x106b4, 0x1},
+ {0x107b4, 0x1},
+ {0x108b4, 0x1},
+ {0x11011, 0x1},
+ {0x11012, 0x1},
+ {0x11013, 0x180},
+ {0x11018, 0x1},
+ {0x11002, 0x6209},
+ {0x110b2, 0x1},
+ {0x111b4, 0x1},
+ {0x112b4, 0x1},
+ {0x113b4, 0x1},
+ {0x114b4, 0x1},
+ {0x115b4, 0x1},
+ {0x116b4, 0x1},
+ {0x117b4, 0x1},
+ {0x118b4, 0x1},
+ {0x20089, 0x1},
+ {0x20088, 0x19},
+ {0xc0080, 0x0},
+ {0xd0000, 0x1},
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+ {
+ /* P0 1600mts 1D */
+ .drate = 1600,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+ },
+ {
+ /* P1 800mts 1D */
+ .drate = 800,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+ },
+ {
+ /* P2 625mts 1D */
+ .drate = 625,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+ },
+ {
+ /* P0 1600mts 2D */
+ .drate = 1600,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = ddr_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+ },
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing_1600mts = {
+ .ddrc_cfg = ddr_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+ .ddrphy_cfg = ddr_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+ .fsp_msg = ddr_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+ .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+ .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+ .ddrphy_pie = ddr_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+ .fsp_table = { 1600, 800, 625, },
+ .fsp_cfg = ddr_dram_fsp_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
diff --git a/board/freescale/imx91_evk/lpddr4_timing_2400mts.c b/board/freescale/imx91_evk/lpddr4_timing_2400mts.c
new file mode 100644
index 0000000..e0e6f5d
--- /dev/null
+++ b/board/freescale/imx91_evk/lpddr4_timing_2400mts.c
@@ -0,0 +1,1995 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2024 NXP
+ *
+ * Code generated with DDR Tool v3.3.0_1.9-d1cdb7d3.
+ * DDR PHY FW2022.01
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+/* Initialize DDRC registers */
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+ {0x4e300110, 0x44100001},
+ {0x4e300000, 0x8000ff},
+ {0x4e300008, 0x0},
+ {0x4e300080, 0x80000512},
+ {0x4e300084, 0x0},
+ {0x4e300114, 0x1002},
+ {0x4e300260, 0x80},
+ {0x4e300f04, 0x80},
+ {0x4e300800, 0x43b30002},
+ {0x4e300804, 0x1f1f1f1f},
+ {0x4e301000, 0x0},
+ {0x4e301240, 0x0},
+ {0x4e301244, 0x0},
+ {0x4e301248, 0x0},
+ {0x4e30124c, 0x0},
+ {0x4e301250, 0x0},
+ {0x4e301254, 0x0},
+ {0x4e301258, 0x0},
+ {0x4e30125c, 0x0},
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+ {
+ {
+ {0x4e300100, 0x135C2110},
+ {0x4e300104, 0xF8990011},
+ {0x4e300108, 0x636E08CC},
+ {0x4e30010C, 0x0061E070},
+ {0x4e300124, 0x124E0000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x31D00000},
+ {0x4e300170, 0x8B0B0608},
+ {0x4e300250, 0x0000001A},
+ {0x4e300254, 0x00DC00DC},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ {0x4e300300, 0x1633160D},
+ {0x4e300304, 0x00DC180C},
+ {0x4e300308, 0x0C3C0927},
+ },
+ {
+ {0x01, 0xC4},
+ {0x02, 0x24},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x010D1100},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0xBABAC068},
+ {0x4e30010C, 0x00610158},
+ {0x4e300124, 0x09270000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30400000},
+ {0x4e300170, 0x8A0A0508},
+ {0x4e300250, 0x0000000D},
+ {0x4e300254, 0x006A006A},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0xA4},
+ {0x02, 0x52},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00061000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x6E62FA48},
+ {0x4e30010C, 0x0031010D},
+ {0x4e300124, 0x04C50000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30000000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000007},
+ {0x4e300254, 0x00340034},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 1,
+ },
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+ {0x100a0, 0x4},
+ {0x100a1, 0x5},
+ {0x100a2, 0x6},
+ {0x100a3, 0x7},
+ {0x100a4, 0x0},
+ {0x100a5, 0x1},
+ {0x100a6, 0x2},
+ {0x100a7, 0x3},
+ {0x110a0, 0x3},
+ {0x110a1, 0x2},
+ {0x110a2, 0x0},
+ {0x110a3, 0x1},
+ {0x110a4, 0x7},
+ {0x110a5, 0x6},
+ {0x110a6, 0x4},
+ {0x110a7, 0x5},
+ {0x1005f, 0x1ff},
+ {0x1015f, 0x1ff},
+ {0x1105f, 0x1ff},
+ {0x1115f, 0x1ff},
+ {0x11005f, 0x1ff},
+ {0x11015f, 0x1ff},
+ {0x11105f, 0x1ff},
+ {0x11115f, 0x1ff},
+ {0x21005f, 0x1ff},
+ {0x21015f, 0x1ff},
+ {0x21105f, 0x1ff},
+ {0x21115f, 0x1ff},
+ {0x55, 0x1ff},
+ {0x1055, 0x1ff},
+ {0x2055, 0x1ff},
+ {0x200c5, 0xa},
+ {0x1200c5, 0x2},
+ {0x2200c5, 0x7},
+ {0x2002e, 0x2},
+ {0x12002e, 0x1},
+ {0x22002e, 0x2},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x2007d, 0x212},
+ {0x2007c, 0x61},
+ {0x120024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x12007d, 0x212},
+ {0x12007c, 0x61},
+ {0x220024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x22007d, 0x212},
+ {0x22007c, 0x61},
+ {0x20056, 0x3},
+ {0x120056, 0x3},
+ {0x220056, 0x3},
+ {0x1004d, 0x600},
+ {0x1014d, 0x600},
+ {0x1104d, 0x600},
+ {0x1114d, 0x600},
+ {0x11004d, 0x600},
+ {0x11014d, 0x600},
+ {0x11104d, 0x600},
+ {0x11114d, 0x600},
+ {0x21004d, 0x600},
+ {0x21014d, 0x600},
+ {0x21104d, 0x600},
+ {0x21114d, 0x600},
+ {0x10049, 0xe3f},
+ {0x10149, 0xe3f},
+ {0x11049, 0xe3f},
+ {0x11149, 0xe3f},
+ {0x110049, 0xe3f},
+ {0x110149, 0xe3f},
+ {0x111049, 0xe3f},
+ {0x111149, 0xe3f},
+ {0x210049, 0xe3f},
+ {0x210149, 0xe3f},
+ {0x211049, 0xe3f},
+ {0x211149, 0xe3f},
+ {0x43, 0x7f},
+ {0x1043, 0x7f},
+ {0x2043, 0x7f},
+ {0x20018, 0x1},
+ {0x20075, 0x4},
+ {0x20050, 0x11},
+ {0x2009b, 0x2},
+ {0x20008, 0x258},
+ {0x120008, 0x12c},
+ {0x220008, 0x9c},
+ {0x20088, 0x9},
+ {0x200b2, 0x10c},
+ {0x10043, 0x5a1},
+ {0x10143, 0x5a1},
+ {0x11043, 0x5a1},
+ {0x11143, 0x5a1},
+ {0x1200b2, 0x10c},
+ {0x110043, 0x5a1},
+ {0x110143, 0x5a1},
+ {0x111043, 0x5a1},
+ {0x111143, 0x5a1},
+ {0x2200b2, 0x10c},
+ {0x210043, 0x5a1},
+ {0x210143, 0x5a1},
+ {0x211043, 0x5a1},
+ {0x211143, 0x5a1},
+ {0x200fa, 0x2},
+ {0x1200fa, 0x2},
+ {0x2200fa, 0x2},
+ {0x20019, 0x1},
+ {0x120019, 0x1},
+ {0x220019, 0x1},
+ {0x200f0, 0x600},
+ {0x200f1, 0x0},
+ {0x200f2, 0x4444},
+ {0x200f3, 0x8888},
+ {0x200f4, 0x5655},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0xf000},
+ {0x1004a, 0x500},
+ {0x1104a, 0x500},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0x20021, 0x0},
+ {0x200c7, 0x21},
+ {0x1200c7, 0x41},
+ {0x200ca, 0x24},
+ {0x1200ca, 0x24},
+};
+
+/* PHY trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+ {0x1005f, 0x0},
+ {0x1015f, 0x0},
+ {0x1105f, 0x0},
+ {0x1115f, 0x0},
+ {0x11005f, 0x0},
+ {0x11015f, 0x0},
+ {0x11105f, 0x0},
+ {0x11115f, 0x0},
+ {0x21005f, 0x0},
+ {0x21015f, 0x0},
+ {0x21105f, 0x0},
+ {0x21115f, 0x0},
+ {0x55, 0x0},
+ {0x1055, 0x0},
+ {0x2055, 0x0},
+ {0x200c5, 0x0},
+ {0x1200c5, 0x0},
+ {0x2200c5, 0x0},
+ {0x2002e, 0x0},
+ {0x12002e, 0x0},
+ {0x22002e, 0x0},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x0},
+ {0x2003a, 0x0},
+ {0x2007d, 0x0},
+ {0x2007c, 0x0},
+ {0x120024, 0x0},
+ {0x12007d, 0x0},
+ {0x12007c, 0x0},
+ {0x220024, 0x0},
+ {0x22007d, 0x0},
+ {0x22007c, 0x0},
+ {0x20056, 0x0},
+ {0x120056, 0x0},
+ {0x220056, 0x0},
+ {0x1004d, 0x0},
+ {0x1014d, 0x0},
+ {0x1104d, 0x0},
+ {0x1114d, 0x0},
+ {0x11004d, 0x0},
+ {0x11014d, 0x0},
+ {0x11104d, 0x0},
+ {0x11114d, 0x0},
+ {0x21004d, 0x0},
+ {0x21014d, 0x0},
+ {0x21104d, 0x0},
+ {0x21114d, 0x0},
+ {0x10049, 0x0},
+ {0x10149, 0x0},
+ {0x11049, 0x0},
+ {0x11149, 0x0},
+ {0x110049, 0x0},
+ {0x110149, 0x0},
+ {0x111049, 0x0},
+ {0x111149, 0x0},
+ {0x210049, 0x0},
+ {0x210149, 0x0},
+ {0x211049, 0x0},
+ {0x211149, 0x0},
+ {0x43, 0x0},
+ {0x1043, 0x0},
+ {0x2043, 0x0},
+ {0x20018, 0x0},
+ {0x20075, 0x0},
+ {0x20050, 0x0},
+ {0x2009b, 0x0},
+ {0x20008, 0x0},
+ {0x120008, 0x0},
+ {0x220008, 0x0},
+ {0x20088, 0x0},
+ {0x200b2, 0x0},
+ {0x10043, 0x0},
+ {0x10143, 0x0},
+ {0x11043, 0x0},
+ {0x11143, 0x0},
+ {0x1200b2, 0x0},
+ {0x110043, 0x0},
+ {0x110143, 0x0},
+ {0x111043, 0x0},
+ {0x111143, 0x0},
+ {0x2200b2, 0x0},
+ {0x210043, 0x0},
+ {0x210143, 0x0},
+ {0x211043, 0x0},
+ {0x211143, 0x0},
+ {0x200fa, 0x0},
+ {0x1200fa, 0x0},
+ {0x2200fa, 0x0},
+ {0x20019, 0x0},
+ {0x120019, 0x0},
+ {0x220019, 0x0},
+ {0x200f0, 0x0},
+ {0x200f1, 0x0},
+ {0x200f2, 0x0},
+ {0x200f3, 0x0},
+ {0x200f4, 0x0},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0x0},
+ {0x1004a, 0x0},
+ {0x1104a, 0x0},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0xd0000, 0x0},
+ {0x90000, 0x0},
+ {0x90001, 0x0},
+ {0x90002, 0x0},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x0},
+ {0x90029, 0x0},
+ {0x9002a, 0x0},
+ {0x9002b, 0x0},
+ {0x9002c, 0x0},
+ {0x9002d, 0x0},
+ {0x9002e, 0x0},
+ {0x9002f, 0x0},
+ {0x90030, 0x0},
+ {0x90031, 0x0},
+ {0x90032, 0x0},
+ {0x90033, 0x0},
+ {0x90034, 0x0},
+ {0x90035, 0x0},
+ {0x90036, 0x0},
+ {0x90037, 0x0},
+ {0x90038, 0x0},
+ {0x90039, 0x0},
+ {0x9003a, 0x0},
+ {0x9003b, 0x0},
+ {0x9003c, 0x0},
+ {0x9003d, 0x0},
+ {0x9003e, 0x0},
+ {0x9003f, 0x0},
+ {0x90040, 0x0},
+ {0x90041, 0x0},
+ {0x90042, 0x0},
+ {0x90043, 0x0},
+ {0x90044, 0x0},
+ {0x90045, 0x0},
+ {0x90046, 0x0},
+ {0x90047, 0x0},
+ {0x90048, 0x0},
+ {0x90049, 0x0},
+ {0x9004a, 0x0},
+ {0x9004b, 0x0},
+ {0x9004c, 0x0},
+ {0x9004d, 0x0},
+ {0x9004e, 0x0},
+ {0x9004f, 0x0},
+ {0x90050, 0x0},
+ {0x90051, 0x0},
+ {0x90052, 0x0},
+ {0x90053, 0x0},
+ {0x90054, 0x0},
+ {0x90055, 0x0},
+ {0x90056, 0x0},
+ {0x90057, 0x0},
+ {0x90058, 0x0},
+ {0x90059, 0x0},
+ {0x9005a, 0x0},
+ {0x9005b, 0x0},
+ {0x9005c, 0x0},
+ {0x9005d, 0x0},
+ {0x9005e, 0x0},
+ {0x9005f, 0x0},
+ {0x90060, 0x0},
+ {0x90061, 0x0},
+ {0x90062, 0x0},
+ {0x90063, 0x0},
+ {0x90064, 0x0},
+ {0x90065, 0x0},
+ {0x90066, 0x0},
+ {0x90067, 0x0},
+ {0x90068, 0x0},
+ {0x90069, 0x0},
+ {0x9006a, 0x0},
+ {0x9006b, 0x0},
+ {0x9006c, 0x0},
+ {0x9006d, 0x0},
+ {0x9006e, 0x0},
+ {0x9006f, 0x0},
+ {0x90070, 0x0},
+ {0x90071, 0x0},
+ {0x90072, 0x0},
+ {0x90073, 0x0},
+ {0x90074, 0x0},
+ {0x90075, 0x0},
+ {0x90076, 0x0},
+ {0x90077, 0x0},
+ {0x90078, 0x0},
+ {0x90079, 0x0},
+ {0x9007a, 0x0},
+ {0x9007b, 0x0},
+ {0x9007c, 0x0},
+ {0x9007d, 0x0},
+ {0x9007e, 0x0},
+ {0x9007f, 0x0},
+ {0x90080, 0x0},
+ {0x90081, 0x0},
+ {0x90082, 0x0},
+ {0x90083, 0x0},
+ {0x90084, 0x0},
+ {0x90085, 0x0},
+ {0x90086, 0x0},
+ {0x90087, 0x0},
+ {0x90088, 0x0},
+ {0x90089, 0x0},
+ {0x9008a, 0x0},
+ {0x9008b, 0x0},
+ {0x9008c, 0x0},
+ {0x9008d, 0x0},
+ {0x9008e, 0x0},
+ {0x9008f, 0x0},
+ {0x90090, 0x0},
+ {0x90091, 0x0},
+ {0x90092, 0x0},
+ {0x90093, 0x0},
+ {0x90094, 0x0},
+ {0x90095, 0x0},
+ {0x90096, 0x0},
+ {0x90097, 0x0},
+ {0x90098, 0x0},
+ {0x90099, 0x0},
+ {0x9009a, 0x0},
+ {0x9009b, 0x0},
+ {0x9009c, 0x0},
+ {0x9009d, 0x0},
+ {0x9009e, 0x0},
+ {0x9009f, 0x0},
+ {0x900a0, 0x0},
+ {0x900a1, 0x0},
+ {0x900a2, 0x0},
+ {0x900a3, 0x0},
+ {0x900a4, 0x0},
+ {0x900a5, 0x0},
+ {0x900a6, 0x0},
+ {0x900a7, 0x0},
+ {0x900a8, 0x0},
+ {0x900a9, 0x0},
+ {0x40000, 0x0},
+ {0x40020, 0x0},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x0},
+ {0x40021, 0x0},
+ {0x40041, 0x0},
+ {0x40061, 0x0},
+ {0x40002, 0x0},
+ {0x40022, 0x0},
+ {0x40042, 0x0},
+ {0x40062, 0x0},
+ {0x40003, 0x0},
+ {0x40023, 0x0},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x0},
+ {0x40024, 0x0},
+ {0x40044, 0x0},
+ {0x40064, 0x0},
+ {0x40005, 0x0},
+ {0x40025, 0x0},
+ {0x40045, 0x0},
+ {0x40065, 0x0},
+ {0x40006, 0x0},
+ {0x40026, 0x0},
+ {0x40046, 0x0},
+ {0x40066, 0x0},
+ {0x40007, 0x0},
+ {0x40027, 0x0},
+ {0x40047, 0x0},
+ {0x40067, 0x0},
+ {0x40008, 0x0},
+ {0x40028, 0x0},
+ {0x40048, 0x0},
+ {0x40068, 0x0},
+ {0x40009, 0x0},
+ {0x40029, 0x0},
+ {0x40049, 0x0},
+ {0x40069, 0x0},
+ {0x4000a, 0x0},
+ {0x4002a, 0x0},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x0},
+ {0x4002b, 0x0},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x0},
+ {0x4002c, 0x0},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0x0},
+ {0x4002d, 0x0},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x0},
+ {0x4002e, 0x0},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x0},
+ {0x4002f, 0x0},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x0},
+ {0x40030, 0x0},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x0},
+ {0x40031, 0x0},
+ {0x40051, 0x0},
+ {0x40071, 0x0},
+ {0x40012, 0x0},
+ {0x40032, 0x0},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x0},
+ {0x40033, 0x0},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x0},
+ {0x40034, 0x0},
+ {0x40054, 0x0},
+ {0x40074, 0x0},
+ {0x40015, 0x0},
+ {0x40035, 0x0},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x0},
+ {0x40036, 0x0},
+ {0x40056, 0x0},
+ {0x40076, 0x0},
+ {0x40017, 0x0},
+ {0x40037, 0x0},
+ {0x40057, 0x0},
+ {0x40077, 0x0},
+ {0x40018, 0x0},
+ {0x40038, 0x0},
+ {0x40058, 0x0},
+ {0x40078, 0x0},
+ {0x40019, 0x0},
+ {0x40039, 0x0},
+ {0x40059, 0x0},
+ {0x40079, 0x0},
+ {0x4001a, 0x0},
+ {0x4003a, 0x0},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x0},
+ {0x900ac, 0x0},
+ {0x900ad, 0x0},
+ {0x900ae, 0x0},
+ {0x900af, 0x0},
+ {0x900b0, 0x0},
+ {0x900b1, 0x0},
+ {0x900b2, 0x0},
+ {0x900b3, 0x0},
+ {0x900b4, 0x0},
+ {0x900b5, 0x0},
+ {0x900b6, 0x0},
+ {0x900b7, 0x0},
+ {0x900b8, 0x0},
+ {0x900b9, 0x0},
+ {0x900ba, 0x0},
+ {0x900bb, 0x0},
+ {0x900bc, 0x0},
+ {0x900bd, 0x0},
+ {0x900be, 0x0},
+ {0x900bf, 0x0},
+ {0x900c0, 0x0},
+ {0x900c1, 0x0},
+ {0x900c2, 0x0},
+ {0x900c3, 0x0},
+ {0x900c4, 0x0},
+ {0x900c5, 0x0},
+ {0x900c6, 0x0},
+ {0x900c7, 0x0},
+ {0x900c8, 0x0},
+ {0x900c9, 0x0},
+ {0x900ca, 0x0},
+ {0x900cb, 0x0},
+ {0x900cc, 0x0},
+ {0x900cd, 0x0},
+ {0x900ce, 0x0},
+ {0x900cf, 0x0},
+ {0x900d0, 0x0},
+ {0x900d1, 0x0},
+ {0x900d2, 0x0},
+ {0x900d3, 0x0},
+ {0x900d4, 0x0},
+ {0x900d5, 0x0},
+ {0x900d6, 0x0},
+ {0x900d7, 0x0},
+ {0x900d8, 0x0},
+ {0x900d9, 0x0},
+ {0x900da, 0x0},
+ {0x900db, 0x0},
+ {0x900dc, 0x0},
+ {0x900dd, 0x0},
+ {0x900de, 0x0},
+ {0x900df, 0x0},
+ {0x900e0, 0x0},
+ {0x900e1, 0x0},
+ {0x900e2, 0x0},
+ {0x900e3, 0x0},
+ {0x900e4, 0x0},
+ {0x900e5, 0x0},
+ {0x900e6, 0x0},
+ {0x900e7, 0x0},
+ {0x900e8, 0x0},
+ {0x900e9, 0x0},
+ {0x900ea, 0x0},
+ {0x900eb, 0x0},
+ {0x900ec, 0x0},
+ {0x900ed, 0x0},
+ {0x900ee, 0x0},
+ {0x900ef, 0x0},
+ {0x900f0, 0x0},
+ {0x900f1, 0x0},
+ {0x900f2, 0x0},
+ {0x900f3, 0x0},
+ {0x900f4, 0x0},
+ {0x900f5, 0x0},
+ {0x900f6, 0x0},
+ {0x900f7, 0x0},
+ {0x900f8, 0x0},
+ {0x900f9, 0x0},
+ {0x900fa, 0x0},
+ {0x900fb, 0x0},
+ {0x900fc, 0x0},
+ {0x900fd, 0x0},
+ {0x900fe, 0x0},
+ {0x900ff, 0x0},
+ {0x90100, 0x0},
+ {0x90101, 0x0},
+ {0x90102, 0x0},
+ {0x90103, 0x0},
+ {0x90104, 0x0},
+ {0x90105, 0x0},
+ {0x90106, 0x0},
+ {0x90107, 0x0},
+ {0x90108, 0x0},
+ {0x90109, 0x0},
+ {0x9010a, 0x0},
+ {0x9010b, 0x0},
+ {0x9010c, 0x0},
+ {0x9010d, 0x0},
+ {0x9010e, 0x0},
+ {0x9010f, 0x0},
+ {0x90110, 0x0},
+ {0x90111, 0x0},
+ {0x90112, 0x0},
+ {0x90113, 0x0},
+ {0x90114, 0x0},
+ {0x90115, 0x0},
+ {0x90116, 0x0},
+ {0x90117, 0x0},
+ {0x90118, 0x0},
+ {0x90119, 0x0},
+ {0x9011a, 0x0},
+ {0x9011b, 0x0},
+ {0x9011c, 0x0},
+ {0x9011d, 0x0},
+ {0x9011e, 0x0},
+ {0x9011f, 0x0},
+ {0x90120, 0x0},
+ {0x90121, 0x0},
+ {0x90122, 0x0},
+ {0x90123, 0x0},
+ {0x90124, 0x0},
+ {0x90125, 0x0},
+ {0x90126, 0x0},
+ {0x90127, 0x0},
+ {0x90128, 0x0},
+ {0x90129, 0x0},
+ {0x9012a, 0x0},
+ {0x9012b, 0x0},
+ {0x9012c, 0x0},
+ {0x9012d, 0x0},
+ {0x9012e, 0x0},
+ {0x9012f, 0x0},
+ {0x90130, 0x0},
+ {0x90131, 0x0},
+ {0x90132, 0x0},
+ {0x90133, 0x0},
+ {0x90134, 0x0},
+ {0x90135, 0x0},
+ {0x90136, 0x0},
+ {0x90137, 0x0},
+ {0x90138, 0x0},
+ {0x90139, 0x0},
+ {0x9013a, 0x0},
+ {0x9013b, 0x0},
+ {0x9013c, 0x0},
+ {0x9013d, 0x0},
+ {0x9013e, 0x0},
+ {0x9013f, 0x0},
+ {0x90140, 0x0},
+ {0x90141, 0x0},
+ {0x90142, 0x0},
+ {0x90143, 0x0},
+ {0x90144, 0x0},
+ {0x90145, 0x0},
+ {0x90146, 0x0},
+ {0x90147, 0x0},
+ {0x90148, 0x0},
+ {0x90149, 0x0},
+ {0x9014a, 0x0},
+ {0x9014b, 0x0},
+ {0x9014c, 0x0},
+ {0x9014d, 0x0},
+ {0x9014e, 0x0},
+ {0x9014f, 0x0},
+ {0x90150, 0x0},
+ {0x90151, 0x0},
+ {0x90152, 0x0},
+ {0x90153, 0x0},
+ {0x90154, 0x0},
+ {0x90155, 0x0},
+ {0x90156, 0x0},
+ {0x90157, 0x0},
+ {0x90158, 0x0},
+ {0x90159, 0x0},
+ {0x9015a, 0x0},
+ {0x9015b, 0x0},
+ {0x9015c, 0x0},
+ {0x9015d, 0x0},
+ {0x9015e, 0x0},
+ {0x9015f, 0x0},
+ {0x90160, 0x0},
+ {0x90161, 0x0},
+ {0x90162, 0x0},
+ {0x90163, 0x0},
+ {0x90164, 0x0},
+ {0x90165, 0x0},
+ {0x90166, 0x0},
+ {0x90167, 0x0},
+ {0x90168, 0x0},
+ {0x90169, 0x0},
+ {0x9016a, 0x0},
+ {0x9016b, 0x0},
+ {0x9016c, 0x0},
+ {0x9016d, 0x0},
+ {0x9016e, 0x0},
+ {0x9016f, 0x0},
+ {0x90170, 0x0},
+ {0x90171, 0x0},
+ {0x90172, 0x0},
+ {0x90173, 0x0},
+ {0x90174, 0x0},
+ {0x90175, 0x0},
+ {0x90176, 0x0},
+ {0x90177, 0x0},
+ {0x90178, 0x0},
+ {0x90179, 0x0},
+ {0x9017a, 0x0},
+ {0x9017b, 0x0},
+ {0x9017c, 0x0},
+ {0x9017d, 0x0},
+ {0x9017e, 0x0},
+ {0x9017f, 0x0},
+ {0x90180, 0x0},
+ {0x90181, 0x0},
+ {0x90182, 0x0},
+ {0x90183, 0x0},
+ {0x90184, 0x0},
+ {0x90006, 0x0},
+ {0x90007, 0x0},
+ {0x90008, 0x0},
+ {0x90009, 0x0},
+ {0x9000a, 0x0},
+ {0x9000b, 0x0},
+ {0xd00e7, 0x0},
+ {0x90017, 0x0},
+ {0x9001f, 0x0},
+ {0x90026, 0x0},
+ {0x400d0, 0x0},
+ {0x400d1, 0x0},
+ {0x400d2, 0x0},
+ {0x400d3, 0x0},
+ {0x400d4, 0x0},
+ {0x400d5, 0x0},
+ {0x400d6, 0x0},
+ {0x400d7, 0x0},
+ {0x200be, 0x0},
+ {0x2000b, 0x0},
+ {0x2000c, 0x0},
+ {0x2000d, 0x0},
+ {0x2000e, 0x0},
+ {0x12000b, 0x0},
+ {0x12000c, 0x0},
+ {0x12000d, 0x0},
+ {0x12000e, 0x0},
+ {0x22000b, 0x0},
+ {0x22000c, 0x0},
+ {0x22000d, 0x0},
+ {0x22000e, 0x0},
+ {0x9000c, 0x0},
+ {0x9000d, 0x0},
+ {0x9000e, 0x0},
+ {0x9000f, 0x0},
+ {0x90010, 0x0},
+ {0x90011, 0x0},
+ {0x90012, 0x0},
+ {0x90013, 0x0},
+ {0x20010, 0x0},
+ {0x20011, 0x0},
+ {0x120010, 0x0},
+ {0x120011, 0x0},
+ {0x40080, 0x0},
+ {0x40081, 0x0},
+ {0x40082, 0x0},
+ {0x40083, 0x0},
+ {0x40084, 0x0},
+ {0x40085, 0x0},
+ {0x140080, 0x0},
+ {0x140081, 0x0},
+ {0x140082, 0x0},
+ {0x140083, 0x0},
+ {0x140084, 0x0},
+ {0x140085, 0x0},
+ {0x240080, 0x0},
+ {0x240081, 0x0},
+ {0x240082, 0x0},
+ {0x240083, 0x0},
+ {0x240084, 0x0},
+ {0x240085, 0x0},
+ {0x400fd, 0x0},
+ {0x400f1, 0x0},
+ {0x10011, 0x0},
+ {0x10012, 0x0},
+ {0x10013, 0x0},
+ {0x10018, 0x0},
+ {0x10002, 0x0},
+ {0x100b2, 0x0},
+ {0x101b4, 0x0},
+ {0x102b4, 0x0},
+ {0x103b4, 0x0},
+ {0x104b4, 0x0},
+ {0x105b4, 0x0},
+ {0x106b4, 0x0},
+ {0x107b4, 0x0},
+ {0x108b4, 0x0},
+ {0x11011, 0x0},
+ {0x11012, 0x0},
+ {0x11013, 0x0},
+ {0x11018, 0x0},
+ {0x11002, 0x0},
+ {0x110b2, 0x0},
+ {0x111b4, 0x0},
+ {0x112b4, 0x0},
+ {0x113b4, 0x0},
+ {0x114b4, 0x0},
+ {0x115b4, 0x0},
+ {0x116b4, 0x0},
+ {0x117b4, 0x0},
+ {0x118b4, 0x0},
+ {0x20089, 0x0},
+ {0xc0080, 0x0},
+ {0x200cb, 0x0},
+ {0x10068, 0x0},
+ {0x10069, 0x0},
+ {0x10168, 0x0},
+ {0x10169, 0x0},
+ {0x10268, 0x0},
+ {0x10269, 0x0},
+ {0x10368, 0x0},
+ {0x10369, 0x0},
+ {0x10468, 0x0},
+ {0x10469, 0x0},
+ {0x10568, 0x0},
+ {0x10569, 0x0},
+ {0x10668, 0x0},
+ {0x10669, 0x0},
+ {0x10768, 0x0},
+ {0x10769, 0x0},
+ {0x10868, 0x0},
+ {0x10869, 0x0},
+ {0x100aa, 0x0},
+ {0x10062, 0x0},
+ {0x10001, 0x0},
+ {0x100a0, 0x0},
+ {0x100a1, 0x0},
+ {0x100a2, 0x0},
+ {0x100a3, 0x0},
+ {0x100a4, 0x0},
+ {0x100a5, 0x0},
+ {0x100a6, 0x0},
+ {0x100a7, 0x0},
+ {0x11068, 0x0},
+ {0x11069, 0x0},
+ {0x11168, 0x0},
+ {0x11169, 0x0},
+ {0x11268, 0x0},
+ {0x11269, 0x0},
+ {0x11368, 0x0},
+ {0x11369, 0x0},
+ {0x11468, 0x0},
+ {0x11469, 0x0},
+ {0x11568, 0x0},
+ {0x11569, 0x0},
+ {0x11668, 0x0},
+ {0x11669, 0x0},
+ {0x11768, 0x0},
+ {0x11769, 0x0},
+ {0x11868, 0x0},
+ {0x11869, 0x0},
+ {0x110aa, 0x0},
+ {0x11062, 0x0},
+ {0x11001, 0x0},
+ {0x110a0, 0x0},
+ {0x110a1, 0x0},
+ {0x110a2, 0x0},
+ {0x110a3, 0x0},
+ {0x110a4, 0x0},
+ {0x110a5, 0x0},
+ {0x110a6, 0x0},
+ {0x110a7, 0x0},
+ {0x80, 0x0},
+ {0x1080, 0x0},
+ {0x2080, 0x0},
+ {0x10020, 0x0},
+ {0x10080, 0x0},
+ {0x10081, 0x0},
+ {0x100d0, 0x0},
+ {0x100d1, 0x0},
+ {0x1008c, 0x0},
+ {0x1008d, 0x0},
+ {0x10180, 0x0},
+ {0x10181, 0x0},
+ {0x101d0, 0x0},
+ {0x101d1, 0x0},
+ {0x1018c, 0x0},
+ {0x1018d, 0x0},
+ {0x100c0, 0x0},
+ {0x100c1, 0x0},
+ {0x101c0, 0x0},
+ {0x101c1, 0x0},
+ {0x102c0, 0x0},
+ {0x102c1, 0x0},
+ {0x103c0, 0x0},
+ {0x103c1, 0x0},
+ {0x104c0, 0x0},
+ {0x104c1, 0x0},
+ {0x105c0, 0x0},
+ {0x105c1, 0x0},
+ {0x106c0, 0x0},
+ {0x106c1, 0x0},
+ {0x107c0, 0x0},
+ {0x107c1, 0x0},
+ {0x108c0, 0x0},
+ {0x108c1, 0x0},
+ {0x100ae, 0x0},
+ {0x100af, 0x0},
+ {0x11020, 0x0},
+ {0x11080, 0x0},
+ {0x11081, 0x0},
+ {0x110d0, 0x0},
+ {0x110d1, 0x0},
+ {0x1108c, 0x0},
+ {0x1108d, 0x0},
+ {0x11180, 0x0},
+ {0x11181, 0x0},
+ {0x111d0, 0x0},
+ {0x111d1, 0x0},
+ {0x1118c, 0x0},
+ {0x1118d, 0x0},
+ {0x110c0, 0x0},
+ {0x110c1, 0x0},
+ {0x111c0, 0x0},
+ {0x111c1, 0x0},
+ {0x112c0, 0x0},
+ {0x112c1, 0x0},
+ {0x113c0, 0x0},
+ {0x113c1, 0x0},
+ {0x114c0, 0x0},
+ {0x114c1, 0x0},
+ {0x115c0, 0x0},
+ {0x115c1, 0x0},
+ {0x116c0, 0x0},
+ {0x116c1, 0x0},
+ {0x117c0, 0x0},
+ {0x117c1, 0x0},
+ {0x118c0, 0x0},
+ {0x118c1, 0x0},
+ {0x110ae, 0x0},
+ {0x110af, 0x0},
+ {0x90201, 0x0},
+ {0x90202, 0x0},
+ {0x90203, 0x0},
+ {0x90205, 0x0},
+ {0x90206, 0x0},
+ {0x90207, 0x0},
+ {0x90208, 0x0},
+ {0x20020, 0x0},
+ {0x100080, 0x0},
+ {0x101080, 0x0},
+ {0x102080, 0x0},
+ {0x110020, 0x0},
+ {0x110080, 0x0},
+ {0x110081, 0x0},
+ {0x1100d0, 0x0},
+ {0x1100d1, 0x0},
+ {0x11008c, 0x0},
+ {0x11008d, 0x0},
+ {0x110180, 0x0},
+ {0x110181, 0x0},
+ {0x1101d0, 0x0},
+ {0x1101d1, 0x0},
+ {0x11018c, 0x0},
+ {0x11018d, 0x0},
+ {0x1100c0, 0x0},
+ {0x1100c1, 0x0},
+ {0x1101c0, 0x0},
+ {0x1101c1, 0x0},
+ {0x1102c0, 0x0},
+ {0x1102c1, 0x0},
+ {0x1103c0, 0x0},
+ {0x1103c1, 0x0},
+ {0x1104c0, 0x0},
+ {0x1104c1, 0x0},
+ {0x1105c0, 0x0},
+ {0x1105c1, 0x0},
+ {0x1106c0, 0x0},
+ {0x1106c1, 0x0},
+ {0x1107c0, 0x0},
+ {0x1107c1, 0x0},
+ {0x1108c0, 0x0},
+ {0x1108c1, 0x0},
+ {0x1100ae, 0x0},
+ {0x1100af, 0x0},
+ {0x111020, 0x0},
+ {0x111080, 0x0},
+ {0x111081, 0x0},
+ {0x1110d0, 0x0},
+ {0x1110d1, 0x0},
+ {0x11108c, 0x0},
+ {0x11108d, 0x0},
+ {0x111180, 0x0},
+ {0x111181, 0x0},
+ {0x1111d0, 0x0},
+ {0x1111d1, 0x0},
+ {0x11118c, 0x0},
+ {0x11118d, 0x0},
+ {0x1110c0, 0x0},
+ {0x1110c1, 0x0},
+ {0x1111c0, 0x0},
+ {0x1111c1, 0x0},
+ {0x1112c0, 0x0},
+ {0x1112c1, 0x0},
+ {0x1113c0, 0x0},
+ {0x1113c1, 0x0},
+ {0x1114c0, 0x0},
+ {0x1114c1, 0x0},
+ {0x1115c0, 0x0},
+ {0x1115c1, 0x0},
+ {0x1116c0, 0x0},
+ {0x1116c1, 0x0},
+ {0x1117c0, 0x0},
+ {0x1117c1, 0x0},
+ {0x1118c0, 0x0},
+ {0x1118c1, 0x0},
+ {0x1110ae, 0x0},
+ {0x1110af, 0x0},
+ {0x190201, 0x0},
+ {0x190202, 0x0},
+ {0x190203, 0x0},
+ {0x190205, 0x0},
+ {0x190206, 0x0},
+ {0x190207, 0x0},
+ {0x190208, 0x0},
+ {0x120020, 0x0},
+ {0x200080, 0x0},
+ {0x201080, 0x0},
+ {0x202080, 0x0},
+ {0x210020, 0x0},
+ {0x210080, 0x0},
+ {0x210081, 0x0},
+ {0x2100d0, 0x0},
+ {0x2100d1, 0x0},
+ {0x21008c, 0x0},
+ {0x21008d, 0x0},
+ {0x210180, 0x0},
+ {0x210181, 0x0},
+ {0x2101d0, 0x0},
+ {0x2101d1, 0x0},
+ {0x21018c, 0x0},
+ {0x21018d, 0x0},
+ {0x2100c0, 0x0},
+ {0x2100c1, 0x0},
+ {0x2101c0, 0x0},
+ {0x2101c1, 0x0},
+ {0x2102c0, 0x0},
+ {0x2102c1, 0x0},
+ {0x2103c0, 0x0},
+ {0x2103c1, 0x0},
+ {0x2104c0, 0x0},
+ {0x2104c1, 0x0},
+ {0x2105c0, 0x0},
+ {0x2105c1, 0x0},
+ {0x2106c0, 0x0},
+ {0x2106c1, 0x0},
+ {0x2107c0, 0x0},
+ {0x2107c1, 0x0},
+ {0x2108c0, 0x0},
+ {0x2108c1, 0x0},
+ {0x2100ae, 0x0},
+ {0x2100af, 0x0},
+ {0x211020, 0x0},
+ {0x211080, 0x0},
+ {0x211081, 0x0},
+ {0x2110d0, 0x0},
+ {0x2110d1, 0x0},
+ {0x21108c, 0x0},
+ {0x21108d, 0x0},
+ {0x211180, 0x0},
+ {0x211181, 0x0},
+ {0x2111d0, 0x0},
+ {0x2111d1, 0x0},
+ {0x21118c, 0x0},
+ {0x21118d, 0x0},
+ {0x2110c0, 0x0},
+ {0x2110c1, 0x0},
+ {0x2111c0, 0x0},
+ {0x2111c1, 0x0},
+ {0x2112c0, 0x0},
+ {0x2112c1, 0x0},
+ {0x2113c0, 0x0},
+ {0x2113c1, 0x0},
+ {0x2114c0, 0x0},
+ {0x2114c1, 0x0},
+ {0x2115c0, 0x0},
+ {0x2115c1, 0x0},
+ {0x2116c0, 0x0},
+ {0x2116c1, 0x0},
+ {0x2117c0, 0x0},
+ {0x2117c1, 0x0},
+ {0x2118c0, 0x0},
+ {0x2118c1, 0x0},
+ {0x2110ae, 0x0},
+ {0x2110af, 0x0},
+ {0x290201, 0x0},
+ {0x290202, 0x0},
+ {0x290203, 0x0},
+ {0x290205, 0x0},
+ {0x290206, 0x0},
+ {0x290207, 0x0},
+ {0x290208, 0x0},
+ {0x220020, 0x0},
+ {0x20077, 0x0},
+ {0x20072, 0x0},
+ {0x20073, 0x0},
+ {0x400c0, 0x0},
+ {0x10040, 0x0},
+ {0x10140, 0x0},
+ {0x10240, 0x0},
+ {0x10340, 0x0},
+ {0x10440, 0x0},
+ {0x10540, 0x0},
+ {0x10640, 0x0},
+ {0x10740, 0x0},
+ {0x10840, 0x0},
+ {0x11040, 0x0},
+ {0x11140, 0x0},
+ {0x11240, 0x0},
+ {0x11340, 0x0},
+ {0x11440, 0x0},
+ {0x11540, 0x0},
+ {0x11640, 0x0},
+ {0x11740, 0x0},
+ {0x11840, 0x0},
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x960},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x131f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x24c4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x24c4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xc400},
+ {0x54033, 0x3324},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xc400},
+ {0x54039, 0x3324},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P1 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x1},
+ {0x54003, 0x4b0},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P2 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x102},
+ {0x54003, 0x270},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4800},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4800},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x11},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x11},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x960},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x61},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54010, 0x2080},
+ {0x54012, 0x110},
+ {0x54019, 0x24c4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x24c4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xc400},
+ {0x54033, 0x3324},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xc400},
+ {0x54039, 0x3324},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+ {0xd0000, 0x0},
+ {0x90000, 0x10},
+ {0x90001, 0x400},
+ {0x90002, 0x10e},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x8},
+ {0x90029, 0xb},
+ {0x9002a, 0x480},
+ {0x9002b, 0x109},
+ {0x9002c, 0x8},
+ {0x9002d, 0x448},
+ {0x9002e, 0x139},
+ {0x9002f, 0x8},
+ {0x90030, 0x478},
+ {0x90031, 0x109},
+ {0x90032, 0x0},
+ {0x90033, 0xe8},
+ {0x90034, 0x109},
+ {0x90035, 0x2},
+ {0x90036, 0x10},
+ {0x90037, 0x139},
+ {0x90038, 0xb},
+ {0x90039, 0x7c0},
+ {0x9003a, 0x139},
+ {0x9003b, 0x44},
+ {0x9003c, 0x633},
+ {0x9003d, 0x159},
+ {0x9003e, 0x14f},
+ {0x9003f, 0x630},
+ {0x90040, 0x159},
+ {0x90041, 0x47},
+ {0x90042, 0x633},
+ {0x90043, 0x149},
+ {0x90044, 0x4f},
+ {0x90045, 0x633},
+ {0x90046, 0x179},
+ {0x90047, 0x8},
+ {0x90048, 0xe0},
+ {0x90049, 0x109},
+ {0x9004a, 0x0},
+ {0x9004b, 0x7c8},
+ {0x9004c, 0x109},
+ {0x9004d, 0x0},
+ {0x9004e, 0x1},
+ {0x9004f, 0x8},
+ {0x90050, 0x30},
+ {0x90051, 0x65a},
+ {0x90052, 0x9},
+ {0x90053, 0x0},
+ {0x90054, 0x45a},
+ {0x90055, 0x9},
+ {0x90056, 0x0},
+ {0x90057, 0x448},
+ {0x90058, 0x109},
+ {0x90059, 0x40},
+ {0x9005a, 0x633},
+ {0x9005b, 0x179},
+ {0x9005c, 0x1},
+ {0x9005d, 0x618},
+ {0x9005e, 0x109},
+ {0x9005f, 0x40c0},
+ {0x90060, 0x633},
+ {0x90061, 0x149},
+ {0x90062, 0x8},
+ {0x90063, 0x4},
+ {0x90064, 0x48},
+ {0x90065, 0x4040},
+ {0x90066, 0x633},
+ {0x90067, 0x149},
+ {0x90068, 0x0},
+ {0x90069, 0x4},
+ {0x9006a, 0x48},
+ {0x9006b, 0x40},
+ {0x9006c, 0x633},
+ {0x9006d, 0x149},
+ {0x9006e, 0x0},
+ {0x9006f, 0x658},
+ {0x90070, 0x109},
+ {0x90071, 0x10},
+ {0x90072, 0x4},
+ {0x90073, 0x18},
+ {0x90074, 0x0},
+ {0x90075, 0x4},
+ {0x90076, 0x78},
+ {0x90077, 0x549},
+ {0x90078, 0x633},
+ {0x90079, 0x159},
+ {0x9007a, 0xd49},
+ {0x9007b, 0x633},
+ {0x9007c, 0x159},
+ {0x9007d, 0x94a},
+ {0x9007e, 0x633},
+ {0x9007f, 0x159},
+ {0x90080, 0x441},
+ {0x90081, 0x633},
+ {0x90082, 0x149},
+ {0x90083, 0x42},
+ {0x90084, 0x633},
+ {0x90085, 0x149},
+ {0x90086, 0x1},
+ {0x90087, 0x633},
+ {0x90088, 0x149},
+ {0x90089, 0x0},
+ {0x9008a, 0xe0},
+ {0x9008b, 0x109},
+ {0x9008c, 0xa},
+ {0x9008d, 0x10},
+ {0x9008e, 0x109},
+ {0x9008f, 0x9},
+ {0x90090, 0x3c0},
+ {0x90091, 0x149},
+ {0x90092, 0x9},
+ {0x90093, 0x3c0},
+ {0x90094, 0x159},
+ {0x90095, 0x18},
+ {0x90096, 0x10},
+ {0x90097, 0x109},
+ {0x90098, 0x0},
+ {0x90099, 0x3c0},
+ {0x9009a, 0x109},
+ {0x9009b, 0x18},
+ {0x9009c, 0x4},
+ {0x9009d, 0x48},
+ {0x9009e, 0x18},
+ {0x9009f, 0x4},
+ {0x900a0, 0x58},
+ {0x900a1, 0xb},
+ {0x900a2, 0x10},
+ {0x900a3, 0x109},
+ {0x900a4, 0x1},
+ {0x900a5, 0x10},
+ {0x900a6, 0x109},
+ {0x900a7, 0x5},
+ {0x900a8, 0x7c0},
+ {0x900a9, 0x109},
+ {0x40000, 0x811},
+ {0x40020, 0x880},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x4008},
+ {0x40021, 0x83},
+ {0x40041, 0x4f},
+ {0x40061, 0x0},
+ {0x40002, 0x4040},
+ {0x40022, 0x83},
+ {0x40042, 0x51},
+ {0x40062, 0x0},
+ {0x40003, 0x811},
+ {0x40023, 0x880},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x720},
+ {0x40024, 0xf},
+ {0x40044, 0x1740},
+ {0x40064, 0x0},
+ {0x40005, 0x16},
+ {0x40025, 0x83},
+ {0x40045, 0x4b},
+ {0x40065, 0x0},
+ {0x40006, 0x716},
+ {0x40026, 0xf},
+ {0x40046, 0x2001},
+ {0x40066, 0x0},
+ {0x40007, 0x716},
+ {0x40027, 0xf},
+ {0x40047, 0x2800},
+ {0x40067, 0x0},
+ {0x40008, 0x716},
+ {0x40028, 0xf},
+ {0x40048, 0xf00},
+ {0x40068, 0x0},
+ {0x40009, 0x720},
+ {0x40029, 0xf},
+ {0x40049, 0x1400},
+ {0x40069, 0x0},
+ {0x4000a, 0xe08},
+ {0x4002a, 0xc15},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x625},
+ {0x4002b, 0x15},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x4028},
+ {0x4002c, 0x80},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0xe08},
+ {0x4002d, 0xc1a},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x625},
+ {0x4002e, 0x1a},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x4040},
+ {0x4002f, 0x80},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x2604},
+ {0x40030, 0x15},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x708},
+ {0x40031, 0x5},
+ {0x40051, 0x0},
+ {0x40071, 0x2002},
+ {0x40012, 0x8},
+ {0x40032, 0x80},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x2604},
+ {0x40033, 0x1a},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x708},
+ {0x40034, 0xa},
+ {0x40054, 0x0},
+ {0x40074, 0x2002},
+ {0x40015, 0x4040},
+ {0x40035, 0x80},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x60a},
+ {0x40036, 0x15},
+ {0x40056, 0x1200},
+ {0x40076, 0x0},
+ {0x40017, 0x61a},
+ {0x40037, 0x15},
+ {0x40057, 0x1300},
+ {0x40077, 0x0},
+ {0x40018, 0x60a},
+ {0x40038, 0x1a},
+ {0x40058, 0x1200},
+ {0x40078, 0x0},
+ {0x40019, 0x642},
+ {0x40039, 0x1a},
+ {0x40059, 0x1300},
+ {0x40079, 0x0},
+ {0x4001a, 0x4808},
+ {0x4003a, 0x880},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x790},
+ {0x900ac, 0x11a},
+ {0x900ad, 0x8},
+ {0x900ae, 0x7aa},
+ {0x900af, 0x2a},
+ {0x900b0, 0x10},
+ {0x900b1, 0x7b2},
+ {0x900b2, 0x2a},
+ {0x900b3, 0x0},
+ {0x900b4, 0x7c8},
+ {0x900b5, 0x109},
+ {0x900b6, 0x10},
+ {0x900b7, 0x10},
+ {0x900b8, 0x109},
+ {0x900b9, 0x10},
+ {0x900ba, 0x2a8},
+ {0x900bb, 0x129},
+ {0x900bc, 0x8},
+ {0x900bd, 0x370},
+ {0x900be, 0x129},
+ {0x900bf, 0xa},
+ {0x900c0, 0x3c8},
+ {0x900c1, 0x1a9},
+ {0x900c2, 0xc},
+ {0x900c3, 0x408},
+ {0x900c4, 0x199},
+ {0x900c5, 0x14},
+ {0x900c6, 0x790},
+ {0x900c7, 0x11a},
+ {0x900c8, 0x8},
+ {0x900c9, 0x4},
+ {0x900ca, 0x18},
+ {0x900cb, 0xe},
+ {0x900cc, 0x408},
+ {0x900cd, 0x199},
+ {0x900ce, 0x8},
+ {0x900cf, 0x8568},
+ {0x900d0, 0x108},
+ {0x900d1, 0x18},
+ {0x900d2, 0x790},
+ {0x900d3, 0x16a},
+ {0x900d4, 0x8},
+ {0x900d5, 0x1d8},
+ {0x900d6, 0x169},
+ {0x900d7, 0x10},
+ {0x900d8, 0x8558},
+ {0x900d9, 0x168},
+ {0x900da, 0x1ff8},
+ {0x900db, 0x85a8},
+ {0x900dc, 0x1e8},
+ {0x900dd, 0x50},
+ {0x900de, 0x798},
+ {0x900df, 0x16a},
+ {0x900e0, 0x60},
+ {0x900e1, 0x7a0},
+ {0x900e2, 0x16a},
+ {0x900e3, 0x8},
+ {0x900e4, 0x8310},
+ {0x900e5, 0x168},
+ {0x900e6, 0x8},
+ {0x900e7, 0xa310},
+ {0x900e8, 0x168},
+ {0x900e9, 0xa},
+ {0x900ea, 0x408},
+ {0x900eb, 0x169},
+ {0x900ec, 0x6e},
+ {0x900ed, 0x0},
+ {0x900ee, 0x68},
+ {0x900ef, 0x0},
+ {0x900f0, 0x408},
+ {0x900f1, 0x169},
+ {0x900f2, 0x0},
+ {0x900f3, 0x8310},
+ {0x900f4, 0x168},
+ {0x900f5, 0x0},
+ {0x900f6, 0xa310},
+ {0x900f7, 0x168},
+ {0x900f8, 0x1ff8},
+ {0x900f9, 0x85a8},
+ {0x900fa, 0x1e8},
+ {0x900fb, 0x68},
+ {0x900fc, 0x798},
+ {0x900fd, 0x16a},
+ {0x900fe, 0x78},
+ {0x900ff, 0x7a0},
+ {0x90100, 0x16a},
+ {0x90101, 0x68},
+ {0x90102, 0x790},
+ {0x90103, 0x16a},
+ {0x90104, 0x8},
+ {0x90105, 0x8b10},
+ {0x90106, 0x168},
+ {0x90107, 0x8},
+ {0x90108, 0xab10},
+ {0x90109, 0x168},
+ {0x9010a, 0xa},
+ {0x9010b, 0x408},
+ {0x9010c, 0x169},
+ {0x9010d, 0x58},
+ {0x9010e, 0x0},
+ {0x9010f, 0x68},
+ {0x90110, 0x0},
+ {0x90111, 0x408},
+ {0x90112, 0x169},
+ {0x90113, 0x0},
+ {0x90114, 0x8b10},
+ {0x90115, 0x168},
+ {0x90116, 0x1},
+ {0x90117, 0xab10},
+ {0x90118, 0x168},
+ {0x90119, 0x0},
+ {0x9011a, 0x1d8},
+ {0x9011b, 0x169},
+ {0x9011c, 0x80},
+ {0x9011d, 0x790},
+ {0x9011e, 0x16a},
+ {0x9011f, 0x18},
+ {0x90120, 0x7aa},
+ {0x90121, 0x6a},
+ {0x90122, 0xa},
+ {0x90123, 0x0},
+ {0x90124, 0x1e9},
+ {0x90125, 0x8},
+ {0x90126, 0x8080},
+ {0x90127, 0x108},
+ {0x90128, 0xf},
+ {0x90129, 0x408},
+ {0x9012a, 0x169},
+ {0x9012b, 0xc},
+ {0x9012c, 0x0},
+ {0x9012d, 0x68},
+ {0x9012e, 0x9},
+ {0x9012f, 0x0},
+ {0x90130, 0x1a9},
+ {0x90131, 0x0},
+ {0x90132, 0x408},
+ {0x90133, 0x169},
+ {0x90134, 0x0},
+ {0x90135, 0x8080},
+ {0x90136, 0x108},
+ {0x90137, 0x8},
+ {0x90138, 0x7aa},
+ {0x90139, 0x6a},
+ {0x9013a, 0x0},
+ {0x9013b, 0x8568},
+ {0x9013c, 0x108},
+ {0x9013d, 0xb7},
+ {0x9013e, 0x790},
+ {0x9013f, 0x16a},
+ {0x90140, 0x1f},
+ {0x90141, 0x0},
+ {0x90142, 0x68},
+ {0x90143, 0x8},
+ {0x90144, 0x8558},
+ {0x90145, 0x168},
+ {0x90146, 0xf},
+ {0x90147, 0x408},
+ {0x90148, 0x169},
+ {0x90149, 0xd},
+ {0x9014a, 0x0},
+ {0x9014b, 0x68},
+ {0x9014c, 0x0},
+ {0x9014d, 0x408},
+ {0x9014e, 0x169},
+ {0x9014f, 0x0},
+ {0x90150, 0x8558},
+ {0x90151, 0x168},
+ {0x90152, 0x8},
+ {0x90153, 0x3c8},
+ {0x90154, 0x1a9},
+ {0x90155, 0x3},
+ {0x90156, 0x370},
+ {0x90157, 0x129},
+ {0x90158, 0x20},
+ {0x90159, 0x2aa},
+ {0x9015a, 0x9},
+ {0x9015b, 0x8},
+ {0x9015c, 0xe8},
+ {0x9015d, 0x109},
+ {0x9015e, 0x0},
+ {0x9015f, 0x8140},
+ {0x90160, 0x10c},
+ {0x90161, 0x10},
+ {0x90162, 0x8138},
+ {0x90163, 0x104},
+ {0x90164, 0x8},
+ {0x90165, 0x448},
+ {0x90166, 0x109},
+ {0x90167, 0xf},
+ {0x90168, 0x7c0},
+ {0x90169, 0x109},
+ {0x9016a, 0x0},
+ {0x9016b, 0xe8},
+ {0x9016c, 0x109},
+ {0x9016d, 0x47},
+ {0x9016e, 0x630},
+ {0x9016f, 0x109},
+ {0x90170, 0x8},
+ {0x90171, 0x618},
+ {0x90172, 0x109},
+ {0x90173, 0x8},
+ {0x90174, 0xe0},
+ {0x90175, 0x109},
+ {0x90176, 0x0},
+ {0x90177, 0x7c8},
+ {0x90178, 0x109},
+ {0x90179, 0x8},
+ {0x9017a, 0x8140},
+ {0x9017b, 0x10c},
+ {0x9017c, 0x0},
+ {0x9017d, 0x478},
+ {0x9017e, 0x109},
+ {0x9017f, 0x0},
+ {0x90180, 0x1},
+ {0x90181, 0x8},
+ {0x90182, 0x8},
+ {0x90183, 0x4},
+ {0x90184, 0x0},
+ {0x90006, 0x8},
+ {0x90007, 0x7c8},
+ {0x90008, 0x109},
+ {0x90009, 0x0},
+ {0x9000a, 0x400},
+ {0x9000b, 0x106},
+ {0xd00e7, 0x400},
+ {0x90017, 0x0},
+ {0x9001f, 0x2b},
+ {0x90026, 0x69},
+ {0x400d0, 0x0},
+ {0x400d1, 0x101},
+ {0x400d2, 0x105},
+ {0x400d3, 0x107},
+ {0x400d4, 0x10f},
+ {0x400d5, 0x202},
+ {0x400d6, 0x20a},
+ {0x400d7, 0x20b},
+ {0x2003a, 0x2},
+ {0x200be, 0x3},
+ {0x2000b, 0x2a3},
+ {0x2000c, 0x96},
+ {0x2000d, 0x5dc},
+ {0x2000e, 0x2c},
+ {0x12000b, 0x152},
+ {0x12000c, 0x4b},
+ {0x12000d, 0x2ee},
+ {0x12000e, 0x2c},
+ {0x22000b, 0xb0},
+ {0x22000c, 0x27},
+ {0x22000d, 0x186},
+ {0x22000e, 0x10},
+ {0x9000c, 0x0},
+ {0x9000d, 0x173},
+ {0x9000e, 0x60},
+ {0x9000f, 0x6110},
+ {0x90010, 0x2152},
+ {0x90011, 0xdfbd},
+ {0x90012, 0x2060},
+ {0x90013, 0x6152},
+ {0x20010, 0x5a},
+ {0x20011, 0x3},
+ {0x120010, 0x5a},
+ {0x120011, 0x3},
+ {0x40080, 0xe0},
+ {0x40081, 0x12},
+ {0x40082, 0xe0},
+ {0x40083, 0x12},
+ {0x40084, 0xe0},
+ {0x40085, 0x12},
+ {0x140080, 0xe0},
+ {0x140081, 0x12},
+ {0x140082, 0xe0},
+ {0x140083, 0x12},
+ {0x140084, 0xe0},
+ {0x140085, 0x12},
+ {0x240080, 0xe0},
+ {0x240081, 0x12},
+ {0x240082, 0xe0},
+ {0x240083, 0x12},
+ {0x240084, 0xe0},
+ {0x240085, 0x12},
+ {0x400fd, 0xf},
+ {0x400f1, 0xe},
+ {0x10011, 0x1},
+ {0x10012, 0x1},
+ {0x10013, 0x180},
+ {0x10018, 0x1},
+ {0x10002, 0x6209},
+ {0x100b2, 0x1},
+ {0x101b4, 0x1},
+ {0x102b4, 0x1},
+ {0x103b4, 0x1},
+ {0x104b4, 0x1},
+ {0x105b4, 0x1},
+ {0x106b4, 0x1},
+ {0x107b4, 0x1},
+ {0x108b4, 0x1},
+ {0x11011, 0x1},
+ {0x11012, 0x1},
+ {0x11013, 0x180},
+ {0x11018, 0x1},
+ {0x11002, 0x6209},
+ {0x110b2, 0x1},
+ {0x111b4, 0x1},
+ {0x112b4, 0x1},
+ {0x113b4, 0x1},
+ {0x114b4, 0x1},
+ {0x115b4, 0x1},
+ {0x116b4, 0x1},
+ {0x117b4, 0x1},
+ {0x118b4, 0x1},
+ {0x20089, 0x1},
+ {0x20088, 0x19},
+ {0xc0080, 0x0},
+ {0xd0000, 0x1},
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+ {
+ /* P0 2400mts 1D */
+ .drate = 2400,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+ },
+ {
+ /* P1 1200mts 1D */
+ .drate = 1200,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+ },
+ {
+ /* P2 625mts 1D */
+ .drate = 625,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+ },
+ {
+ /* P0 2400mts 2D */
+ .drate = 2400,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = ddr_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+ },
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+ .ddrc_cfg = ddr_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+ .ddrphy_cfg = ddr_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+ .fsp_msg = ddr_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+ .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+ .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+ .ddrphy_pie = ddr_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+ .fsp_table = { 2400, 1200, 625, },
+ .fsp_cfg = ddr_dram_fsp_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
diff --git a/board/freescale/imx91_evk/lpddr4_timing_2400mts_ecc.c b/board/freescale/imx91_evk/lpddr4_timing_2400mts_ecc.c
new file mode 100644
index 0000000..8116871
--- /dev/null
+++ b/board/freescale/imx91_evk/lpddr4_timing_2400mts_ecc.c
@@ -0,0 +1,1995 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2024 NXP
+ *
+ * Code generated with DDR Tool v3.3.0_1.9-d1cdb7d3.
+ * DDR PHY FW2022.01
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+/* Initialize DDRC registers */
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+ {0x4e300110, 0x44100001},
+ {0x4e300000, 0x8000ef},
+ {0x4e300008, 0x0},
+ {0x4e300080, 0x80000512},
+ {0x4e300084, 0x0},
+ {0x4e300114, 0x1012},
+ {0x4e300260, 0x80},
+ {0x4e300f04, 0x80},
+ {0x4e300800, 0x43b30d00},
+ {0x4e300804, 0x1f1f1f1f},
+ {0x4e301000, 0xc0000000},
+ {0x4e301240, 0x0},
+ {0x4e301244, 0x0},
+ {0x4e301248, 0x0},
+ {0x4e30124c, 0x0},
+ {0x4e301250, 0x0},
+ {0x4e301254, 0x0},
+ {0x4e301258, 0x0},
+ {0x4e30125c, 0x0},
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+ {
+ {
+ {0x4e300100, 0x135C2110},
+ {0x4e300104, 0xF8990011},
+ {0x4e300108, 0x636E08CC},
+ {0x4e30010C, 0x0061E070},
+ {0x4e300124, 0x124E0000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x31D00000},
+ {0x4e300170, 0x8B0B0608},
+ {0x4e300250, 0x0000001A},
+ {0x4e300254, 0x00DC00DC},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ {0x4e300300, 0x1633160D},
+ {0x4e300304, 0x00DC180C},
+ {0x4e300308, 0x0C3C0927},
+ },
+ {
+ {0x01, 0xC4},
+ {0x02, 0x24},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x010D1100},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0xBABAC068},
+ {0x4e30010C, 0x00610158},
+ {0x4e300124, 0x09270000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30400000},
+ {0x4e300170, 0x8A0A0508},
+ {0x4e300250, 0x0000000D},
+ {0x4e300254, 0x006A006A},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0xA4},
+ {0x02, 0x52},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x00061000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x6E62FA48},
+ {0x4e30010C, 0x0031010D},
+ {0x4e300124, 0x04C50000},
+ {0x4e300160, 0x00009102},
+ {0x4e30016C, 0x30000000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000007},
+ {0x4e300254, 0x00340034},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x33},
+ {0x0b, 0x46},
+ {0x0c, 0x11},
+ {0x0e, 0x48},
+ {0x16, 0x04},
+ },
+ 1,
+ },
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+ {0x100a0, 0x4},
+ {0x100a1, 0x5},
+ {0x100a2, 0x6},
+ {0x100a3, 0x7},
+ {0x100a4, 0x0},
+ {0x100a5, 0x1},
+ {0x100a6, 0x2},
+ {0x100a7, 0x3},
+ {0x110a0, 0x3},
+ {0x110a1, 0x2},
+ {0x110a2, 0x0},
+ {0x110a3, 0x1},
+ {0x110a4, 0x7},
+ {0x110a5, 0x6},
+ {0x110a6, 0x4},
+ {0x110a7, 0x5},
+ {0x1005f, 0x1ff},
+ {0x1015f, 0x1ff},
+ {0x1105f, 0x1ff},
+ {0x1115f, 0x1ff},
+ {0x11005f, 0x1ff},
+ {0x11015f, 0x1ff},
+ {0x11105f, 0x1ff},
+ {0x11115f, 0x1ff},
+ {0x21005f, 0x1ff},
+ {0x21015f, 0x1ff},
+ {0x21105f, 0x1ff},
+ {0x21115f, 0x1ff},
+ {0x55, 0x1ff},
+ {0x1055, 0x1ff},
+ {0x2055, 0x1ff},
+ {0x200c5, 0xa},
+ {0x1200c5, 0x2},
+ {0x2200c5, 0x7},
+ {0x2002e, 0x2},
+ {0x12002e, 0x1},
+ {0x22002e, 0x2},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x2007d, 0x212},
+ {0x2007c, 0x61},
+ {0x120024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x12007d, 0x212},
+ {0x12007c, 0x61},
+ {0x220024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x22007d, 0x212},
+ {0x22007c, 0x61},
+ {0x20056, 0x3},
+ {0x120056, 0x3},
+ {0x220056, 0x3},
+ {0x1004d, 0x600},
+ {0x1014d, 0x600},
+ {0x1104d, 0x600},
+ {0x1114d, 0x600},
+ {0x11004d, 0x600},
+ {0x11014d, 0x600},
+ {0x11104d, 0x600},
+ {0x11114d, 0x600},
+ {0x21004d, 0x600},
+ {0x21014d, 0x600},
+ {0x21104d, 0x600},
+ {0x21114d, 0x600},
+ {0x10049, 0xe3f},
+ {0x10149, 0xe3f},
+ {0x11049, 0xe3f},
+ {0x11149, 0xe3f},
+ {0x110049, 0xe3f},
+ {0x110149, 0xe3f},
+ {0x111049, 0xe3f},
+ {0x111149, 0xe3f},
+ {0x210049, 0xe3f},
+ {0x210149, 0xe3f},
+ {0x211049, 0xe3f},
+ {0x211149, 0xe3f},
+ {0x43, 0x7f},
+ {0x1043, 0x7f},
+ {0x2043, 0x7f},
+ {0x20018, 0x1},
+ {0x20075, 0x4},
+ {0x20050, 0x11},
+ {0x2009b, 0x2},
+ {0x20008, 0x258},
+ {0x120008, 0x12c},
+ {0x220008, 0x9c},
+ {0x20088, 0x9},
+ {0x200b2, 0x10c},
+ {0x10043, 0x5a1},
+ {0x10143, 0x5a1},
+ {0x11043, 0x5a1},
+ {0x11143, 0x5a1},
+ {0x1200b2, 0x10c},
+ {0x110043, 0x5a1},
+ {0x110143, 0x5a1},
+ {0x111043, 0x5a1},
+ {0x111143, 0x5a1},
+ {0x2200b2, 0x10c},
+ {0x210043, 0x5a1},
+ {0x210143, 0x5a1},
+ {0x211043, 0x5a1},
+ {0x211143, 0x5a1},
+ {0x200fa, 0x2},
+ {0x1200fa, 0x2},
+ {0x2200fa, 0x2},
+ {0x20019, 0x1},
+ {0x120019, 0x1},
+ {0x220019, 0x1},
+ {0x200f0, 0x600},
+ {0x200f1, 0x0},
+ {0x200f2, 0x4444},
+ {0x200f3, 0x8888},
+ {0x200f4, 0x5655},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0xf000},
+ {0x1004a, 0x500},
+ {0x1104a, 0x500},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0x20021, 0x0},
+ {0x200c7, 0x21},
+ {0x1200c7, 0x41},
+ {0x200ca, 0x24},
+ {0x1200ca, 0x24},
+};
+
+/* PHY trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+ {0x1005f, 0x0},
+ {0x1015f, 0x0},
+ {0x1105f, 0x0},
+ {0x1115f, 0x0},
+ {0x11005f, 0x0},
+ {0x11015f, 0x0},
+ {0x11105f, 0x0},
+ {0x11115f, 0x0},
+ {0x21005f, 0x0},
+ {0x21015f, 0x0},
+ {0x21105f, 0x0},
+ {0x21115f, 0x0},
+ {0x55, 0x0},
+ {0x1055, 0x0},
+ {0x2055, 0x0},
+ {0x200c5, 0x0},
+ {0x1200c5, 0x0},
+ {0x2200c5, 0x0},
+ {0x2002e, 0x0},
+ {0x12002e, 0x0},
+ {0x22002e, 0x0},
+ {0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
+ {0x20024, 0x0},
+ {0x2003a, 0x0},
+ {0x2007d, 0x0},
+ {0x2007c, 0x0},
+ {0x120024, 0x0},
+ {0x12007d, 0x0},
+ {0x12007c, 0x0},
+ {0x220024, 0x0},
+ {0x22007d, 0x0},
+ {0x22007c, 0x0},
+ {0x20056, 0x0},
+ {0x120056, 0x0},
+ {0x220056, 0x0},
+ {0x1004d, 0x0},
+ {0x1014d, 0x0},
+ {0x1104d, 0x0},
+ {0x1114d, 0x0},
+ {0x11004d, 0x0},
+ {0x11014d, 0x0},
+ {0x11104d, 0x0},
+ {0x11114d, 0x0},
+ {0x21004d, 0x0},
+ {0x21014d, 0x0},
+ {0x21104d, 0x0},
+ {0x21114d, 0x0},
+ {0x10049, 0x0},
+ {0x10149, 0x0},
+ {0x11049, 0x0},
+ {0x11149, 0x0},
+ {0x110049, 0x0},
+ {0x110149, 0x0},
+ {0x111049, 0x0},
+ {0x111149, 0x0},
+ {0x210049, 0x0},
+ {0x210149, 0x0},
+ {0x211049, 0x0},
+ {0x211149, 0x0},
+ {0x43, 0x0},
+ {0x1043, 0x0},
+ {0x2043, 0x0},
+ {0x20018, 0x0},
+ {0x20075, 0x0},
+ {0x20050, 0x0},
+ {0x2009b, 0x0},
+ {0x20008, 0x0},
+ {0x120008, 0x0},
+ {0x220008, 0x0},
+ {0x20088, 0x0},
+ {0x200b2, 0x0},
+ {0x10043, 0x0},
+ {0x10143, 0x0},
+ {0x11043, 0x0},
+ {0x11143, 0x0},
+ {0x1200b2, 0x0},
+ {0x110043, 0x0},
+ {0x110143, 0x0},
+ {0x111043, 0x0},
+ {0x111143, 0x0},
+ {0x2200b2, 0x0},
+ {0x210043, 0x0},
+ {0x210143, 0x0},
+ {0x211043, 0x0},
+ {0x211143, 0x0},
+ {0x200fa, 0x0},
+ {0x1200fa, 0x0},
+ {0x2200fa, 0x0},
+ {0x20019, 0x0},
+ {0x120019, 0x0},
+ {0x220019, 0x0},
+ {0x200f0, 0x0},
+ {0x200f1, 0x0},
+ {0x200f2, 0x0},
+ {0x200f3, 0x0},
+ {0x200f4, 0x0},
+ {0x200f5, 0x0},
+ {0x200f6, 0x0},
+ {0x200f7, 0x0},
+ {0x1004a, 0x0},
+ {0x1104a, 0x0},
+ {0x20025, 0x0},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
+ {0x2002c, 0x0},
+ {0xd0000, 0x0},
+ {0x90000, 0x0},
+ {0x90001, 0x0},
+ {0x90002, 0x0},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x0},
+ {0x90029, 0x0},
+ {0x9002a, 0x0},
+ {0x9002b, 0x0},
+ {0x9002c, 0x0},
+ {0x9002d, 0x0},
+ {0x9002e, 0x0},
+ {0x9002f, 0x0},
+ {0x90030, 0x0},
+ {0x90031, 0x0},
+ {0x90032, 0x0},
+ {0x90033, 0x0},
+ {0x90034, 0x0},
+ {0x90035, 0x0},
+ {0x90036, 0x0},
+ {0x90037, 0x0},
+ {0x90038, 0x0},
+ {0x90039, 0x0},
+ {0x9003a, 0x0},
+ {0x9003b, 0x0},
+ {0x9003c, 0x0},
+ {0x9003d, 0x0},
+ {0x9003e, 0x0},
+ {0x9003f, 0x0},
+ {0x90040, 0x0},
+ {0x90041, 0x0},
+ {0x90042, 0x0},
+ {0x90043, 0x0},
+ {0x90044, 0x0},
+ {0x90045, 0x0},
+ {0x90046, 0x0},
+ {0x90047, 0x0},
+ {0x90048, 0x0},
+ {0x90049, 0x0},
+ {0x9004a, 0x0},
+ {0x9004b, 0x0},
+ {0x9004c, 0x0},
+ {0x9004d, 0x0},
+ {0x9004e, 0x0},
+ {0x9004f, 0x0},
+ {0x90050, 0x0},
+ {0x90051, 0x0},
+ {0x90052, 0x0},
+ {0x90053, 0x0},
+ {0x90054, 0x0},
+ {0x90055, 0x0},
+ {0x90056, 0x0},
+ {0x90057, 0x0},
+ {0x90058, 0x0},
+ {0x90059, 0x0},
+ {0x9005a, 0x0},
+ {0x9005b, 0x0},
+ {0x9005c, 0x0},
+ {0x9005d, 0x0},
+ {0x9005e, 0x0},
+ {0x9005f, 0x0},
+ {0x90060, 0x0},
+ {0x90061, 0x0},
+ {0x90062, 0x0},
+ {0x90063, 0x0},
+ {0x90064, 0x0},
+ {0x90065, 0x0},
+ {0x90066, 0x0},
+ {0x90067, 0x0},
+ {0x90068, 0x0},
+ {0x90069, 0x0},
+ {0x9006a, 0x0},
+ {0x9006b, 0x0},
+ {0x9006c, 0x0},
+ {0x9006d, 0x0},
+ {0x9006e, 0x0},
+ {0x9006f, 0x0},
+ {0x90070, 0x0},
+ {0x90071, 0x0},
+ {0x90072, 0x0},
+ {0x90073, 0x0},
+ {0x90074, 0x0},
+ {0x90075, 0x0},
+ {0x90076, 0x0},
+ {0x90077, 0x0},
+ {0x90078, 0x0},
+ {0x90079, 0x0},
+ {0x9007a, 0x0},
+ {0x9007b, 0x0},
+ {0x9007c, 0x0},
+ {0x9007d, 0x0},
+ {0x9007e, 0x0},
+ {0x9007f, 0x0},
+ {0x90080, 0x0},
+ {0x90081, 0x0},
+ {0x90082, 0x0},
+ {0x90083, 0x0},
+ {0x90084, 0x0},
+ {0x90085, 0x0},
+ {0x90086, 0x0},
+ {0x90087, 0x0},
+ {0x90088, 0x0},
+ {0x90089, 0x0},
+ {0x9008a, 0x0},
+ {0x9008b, 0x0},
+ {0x9008c, 0x0},
+ {0x9008d, 0x0},
+ {0x9008e, 0x0},
+ {0x9008f, 0x0},
+ {0x90090, 0x0},
+ {0x90091, 0x0},
+ {0x90092, 0x0},
+ {0x90093, 0x0},
+ {0x90094, 0x0},
+ {0x90095, 0x0},
+ {0x90096, 0x0},
+ {0x90097, 0x0},
+ {0x90098, 0x0},
+ {0x90099, 0x0},
+ {0x9009a, 0x0},
+ {0x9009b, 0x0},
+ {0x9009c, 0x0},
+ {0x9009d, 0x0},
+ {0x9009e, 0x0},
+ {0x9009f, 0x0},
+ {0x900a0, 0x0},
+ {0x900a1, 0x0},
+ {0x900a2, 0x0},
+ {0x900a3, 0x0},
+ {0x900a4, 0x0},
+ {0x900a5, 0x0},
+ {0x900a6, 0x0},
+ {0x900a7, 0x0},
+ {0x900a8, 0x0},
+ {0x900a9, 0x0},
+ {0x40000, 0x0},
+ {0x40020, 0x0},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x0},
+ {0x40021, 0x0},
+ {0x40041, 0x0},
+ {0x40061, 0x0},
+ {0x40002, 0x0},
+ {0x40022, 0x0},
+ {0x40042, 0x0},
+ {0x40062, 0x0},
+ {0x40003, 0x0},
+ {0x40023, 0x0},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x0},
+ {0x40024, 0x0},
+ {0x40044, 0x0},
+ {0x40064, 0x0},
+ {0x40005, 0x0},
+ {0x40025, 0x0},
+ {0x40045, 0x0},
+ {0x40065, 0x0},
+ {0x40006, 0x0},
+ {0x40026, 0x0},
+ {0x40046, 0x0},
+ {0x40066, 0x0},
+ {0x40007, 0x0},
+ {0x40027, 0x0},
+ {0x40047, 0x0},
+ {0x40067, 0x0},
+ {0x40008, 0x0},
+ {0x40028, 0x0},
+ {0x40048, 0x0},
+ {0x40068, 0x0},
+ {0x40009, 0x0},
+ {0x40029, 0x0},
+ {0x40049, 0x0},
+ {0x40069, 0x0},
+ {0x4000a, 0x0},
+ {0x4002a, 0x0},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x0},
+ {0x4002b, 0x0},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x0},
+ {0x4002c, 0x0},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0x0},
+ {0x4002d, 0x0},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x0},
+ {0x4002e, 0x0},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x0},
+ {0x4002f, 0x0},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x0},
+ {0x40030, 0x0},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x0},
+ {0x40031, 0x0},
+ {0x40051, 0x0},
+ {0x40071, 0x0},
+ {0x40012, 0x0},
+ {0x40032, 0x0},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x0},
+ {0x40033, 0x0},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x0},
+ {0x40034, 0x0},
+ {0x40054, 0x0},
+ {0x40074, 0x0},
+ {0x40015, 0x0},
+ {0x40035, 0x0},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x0},
+ {0x40036, 0x0},
+ {0x40056, 0x0},
+ {0x40076, 0x0},
+ {0x40017, 0x0},
+ {0x40037, 0x0},
+ {0x40057, 0x0},
+ {0x40077, 0x0},
+ {0x40018, 0x0},
+ {0x40038, 0x0},
+ {0x40058, 0x0},
+ {0x40078, 0x0},
+ {0x40019, 0x0},
+ {0x40039, 0x0},
+ {0x40059, 0x0},
+ {0x40079, 0x0},
+ {0x4001a, 0x0},
+ {0x4003a, 0x0},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x0},
+ {0x900ac, 0x0},
+ {0x900ad, 0x0},
+ {0x900ae, 0x0},
+ {0x900af, 0x0},
+ {0x900b0, 0x0},
+ {0x900b1, 0x0},
+ {0x900b2, 0x0},
+ {0x900b3, 0x0},
+ {0x900b4, 0x0},
+ {0x900b5, 0x0},
+ {0x900b6, 0x0},
+ {0x900b7, 0x0},
+ {0x900b8, 0x0},
+ {0x900b9, 0x0},
+ {0x900ba, 0x0},
+ {0x900bb, 0x0},
+ {0x900bc, 0x0},
+ {0x900bd, 0x0},
+ {0x900be, 0x0},
+ {0x900bf, 0x0},
+ {0x900c0, 0x0},
+ {0x900c1, 0x0},
+ {0x900c2, 0x0},
+ {0x900c3, 0x0},
+ {0x900c4, 0x0},
+ {0x900c5, 0x0},
+ {0x900c6, 0x0},
+ {0x900c7, 0x0},
+ {0x900c8, 0x0},
+ {0x900c9, 0x0},
+ {0x900ca, 0x0},
+ {0x900cb, 0x0},
+ {0x900cc, 0x0},
+ {0x900cd, 0x0},
+ {0x900ce, 0x0},
+ {0x900cf, 0x0},
+ {0x900d0, 0x0},
+ {0x900d1, 0x0},
+ {0x900d2, 0x0},
+ {0x900d3, 0x0},
+ {0x900d4, 0x0},
+ {0x900d5, 0x0},
+ {0x900d6, 0x0},
+ {0x900d7, 0x0},
+ {0x900d8, 0x0},
+ {0x900d9, 0x0},
+ {0x900da, 0x0},
+ {0x900db, 0x0},
+ {0x900dc, 0x0},
+ {0x900dd, 0x0},
+ {0x900de, 0x0},
+ {0x900df, 0x0},
+ {0x900e0, 0x0},
+ {0x900e1, 0x0},
+ {0x900e2, 0x0},
+ {0x900e3, 0x0},
+ {0x900e4, 0x0},
+ {0x900e5, 0x0},
+ {0x900e6, 0x0},
+ {0x900e7, 0x0},
+ {0x900e8, 0x0},
+ {0x900e9, 0x0},
+ {0x900ea, 0x0},
+ {0x900eb, 0x0},
+ {0x900ec, 0x0},
+ {0x900ed, 0x0},
+ {0x900ee, 0x0},
+ {0x900ef, 0x0},
+ {0x900f0, 0x0},
+ {0x900f1, 0x0},
+ {0x900f2, 0x0},
+ {0x900f3, 0x0},
+ {0x900f4, 0x0},
+ {0x900f5, 0x0},
+ {0x900f6, 0x0},
+ {0x900f7, 0x0},
+ {0x900f8, 0x0},
+ {0x900f9, 0x0},
+ {0x900fa, 0x0},
+ {0x900fb, 0x0},
+ {0x900fc, 0x0},
+ {0x900fd, 0x0},
+ {0x900fe, 0x0},
+ {0x900ff, 0x0},
+ {0x90100, 0x0},
+ {0x90101, 0x0},
+ {0x90102, 0x0},
+ {0x90103, 0x0},
+ {0x90104, 0x0},
+ {0x90105, 0x0},
+ {0x90106, 0x0},
+ {0x90107, 0x0},
+ {0x90108, 0x0},
+ {0x90109, 0x0},
+ {0x9010a, 0x0},
+ {0x9010b, 0x0},
+ {0x9010c, 0x0},
+ {0x9010d, 0x0},
+ {0x9010e, 0x0},
+ {0x9010f, 0x0},
+ {0x90110, 0x0},
+ {0x90111, 0x0},
+ {0x90112, 0x0},
+ {0x90113, 0x0},
+ {0x90114, 0x0},
+ {0x90115, 0x0},
+ {0x90116, 0x0},
+ {0x90117, 0x0},
+ {0x90118, 0x0},
+ {0x90119, 0x0},
+ {0x9011a, 0x0},
+ {0x9011b, 0x0},
+ {0x9011c, 0x0},
+ {0x9011d, 0x0},
+ {0x9011e, 0x0},
+ {0x9011f, 0x0},
+ {0x90120, 0x0},
+ {0x90121, 0x0},
+ {0x90122, 0x0},
+ {0x90123, 0x0},
+ {0x90124, 0x0},
+ {0x90125, 0x0},
+ {0x90126, 0x0},
+ {0x90127, 0x0},
+ {0x90128, 0x0},
+ {0x90129, 0x0},
+ {0x9012a, 0x0},
+ {0x9012b, 0x0},
+ {0x9012c, 0x0},
+ {0x9012d, 0x0},
+ {0x9012e, 0x0},
+ {0x9012f, 0x0},
+ {0x90130, 0x0},
+ {0x90131, 0x0},
+ {0x90132, 0x0},
+ {0x90133, 0x0},
+ {0x90134, 0x0},
+ {0x90135, 0x0},
+ {0x90136, 0x0},
+ {0x90137, 0x0},
+ {0x90138, 0x0},
+ {0x90139, 0x0},
+ {0x9013a, 0x0},
+ {0x9013b, 0x0},
+ {0x9013c, 0x0},
+ {0x9013d, 0x0},
+ {0x9013e, 0x0},
+ {0x9013f, 0x0},
+ {0x90140, 0x0},
+ {0x90141, 0x0},
+ {0x90142, 0x0},
+ {0x90143, 0x0},
+ {0x90144, 0x0},
+ {0x90145, 0x0},
+ {0x90146, 0x0},
+ {0x90147, 0x0},
+ {0x90148, 0x0},
+ {0x90149, 0x0},
+ {0x9014a, 0x0},
+ {0x9014b, 0x0},
+ {0x9014c, 0x0},
+ {0x9014d, 0x0},
+ {0x9014e, 0x0},
+ {0x9014f, 0x0},
+ {0x90150, 0x0},
+ {0x90151, 0x0},
+ {0x90152, 0x0},
+ {0x90153, 0x0},
+ {0x90154, 0x0},
+ {0x90155, 0x0},
+ {0x90156, 0x0},
+ {0x90157, 0x0},
+ {0x90158, 0x0},
+ {0x90159, 0x0},
+ {0x9015a, 0x0},
+ {0x9015b, 0x0},
+ {0x9015c, 0x0},
+ {0x9015d, 0x0},
+ {0x9015e, 0x0},
+ {0x9015f, 0x0},
+ {0x90160, 0x0},
+ {0x90161, 0x0},
+ {0x90162, 0x0},
+ {0x90163, 0x0},
+ {0x90164, 0x0},
+ {0x90165, 0x0},
+ {0x90166, 0x0},
+ {0x90167, 0x0},
+ {0x90168, 0x0},
+ {0x90169, 0x0},
+ {0x9016a, 0x0},
+ {0x9016b, 0x0},
+ {0x9016c, 0x0},
+ {0x9016d, 0x0},
+ {0x9016e, 0x0},
+ {0x9016f, 0x0},
+ {0x90170, 0x0},
+ {0x90171, 0x0},
+ {0x90172, 0x0},
+ {0x90173, 0x0},
+ {0x90174, 0x0},
+ {0x90175, 0x0},
+ {0x90176, 0x0},
+ {0x90177, 0x0},
+ {0x90178, 0x0},
+ {0x90179, 0x0},
+ {0x9017a, 0x0},
+ {0x9017b, 0x0},
+ {0x9017c, 0x0},
+ {0x9017d, 0x0},
+ {0x9017e, 0x0},
+ {0x9017f, 0x0},
+ {0x90180, 0x0},
+ {0x90181, 0x0},
+ {0x90182, 0x0},
+ {0x90183, 0x0},
+ {0x90184, 0x0},
+ {0x90006, 0x0},
+ {0x90007, 0x0},
+ {0x90008, 0x0},
+ {0x90009, 0x0},
+ {0x9000a, 0x0},
+ {0x9000b, 0x0},
+ {0xd00e7, 0x0},
+ {0x90017, 0x0},
+ {0x9001f, 0x0},
+ {0x90026, 0x0},
+ {0x400d0, 0x0},
+ {0x400d1, 0x0},
+ {0x400d2, 0x0},
+ {0x400d3, 0x0},
+ {0x400d4, 0x0},
+ {0x400d5, 0x0},
+ {0x400d6, 0x0},
+ {0x400d7, 0x0},
+ {0x200be, 0x0},
+ {0x2000b, 0x0},
+ {0x2000c, 0x0},
+ {0x2000d, 0x0},
+ {0x2000e, 0x0},
+ {0x12000b, 0x0},
+ {0x12000c, 0x0},
+ {0x12000d, 0x0},
+ {0x12000e, 0x0},
+ {0x22000b, 0x0},
+ {0x22000c, 0x0},
+ {0x22000d, 0x0},
+ {0x22000e, 0x0},
+ {0x9000c, 0x0},
+ {0x9000d, 0x0},
+ {0x9000e, 0x0},
+ {0x9000f, 0x0},
+ {0x90010, 0x0},
+ {0x90011, 0x0},
+ {0x90012, 0x0},
+ {0x90013, 0x0},
+ {0x20010, 0x0},
+ {0x20011, 0x0},
+ {0x120010, 0x0},
+ {0x120011, 0x0},
+ {0x40080, 0x0},
+ {0x40081, 0x0},
+ {0x40082, 0x0},
+ {0x40083, 0x0},
+ {0x40084, 0x0},
+ {0x40085, 0x0},
+ {0x140080, 0x0},
+ {0x140081, 0x0},
+ {0x140082, 0x0},
+ {0x140083, 0x0},
+ {0x140084, 0x0},
+ {0x140085, 0x0},
+ {0x240080, 0x0},
+ {0x240081, 0x0},
+ {0x240082, 0x0},
+ {0x240083, 0x0},
+ {0x240084, 0x0},
+ {0x240085, 0x0},
+ {0x400fd, 0x0},
+ {0x400f1, 0x0},
+ {0x10011, 0x0},
+ {0x10012, 0x0},
+ {0x10013, 0x0},
+ {0x10018, 0x0},
+ {0x10002, 0x0},
+ {0x100b2, 0x0},
+ {0x101b4, 0x0},
+ {0x102b4, 0x0},
+ {0x103b4, 0x0},
+ {0x104b4, 0x0},
+ {0x105b4, 0x0},
+ {0x106b4, 0x0},
+ {0x107b4, 0x0},
+ {0x108b4, 0x0},
+ {0x11011, 0x0},
+ {0x11012, 0x0},
+ {0x11013, 0x0},
+ {0x11018, 0x0},
+ {0x11002, 0x0},
+ {0x110b2, 0x0},
+ {0x111b4, 0x0},
+ {0x112b4, 0x0},
+ {0x113b4, 0x0},
+ {0x114b4, 0x0},
+ {0x115b4, 0x0},
+ {0x116b4, 0x0},
+ {0x117b4, 0x0},
+ {0x118b4, 0x0},
+ {0x20089, 0x0},
+ {0xc0080, 0x0},
+ {0x200cb, 0x0},
+ {0x10068, 0x0},
+ {0x10069, 0x0},
+ {0x10168, 0x0},
+ {0x10169, 0x0},
+ {0x10268, 0x0},
+ {0x10269, 0x0},
+ {0x10368, 0x0},
+ {0x10369, 0x0},
+ {0x10468, 0x0},
+ {0x10469, 0x0},
+ {0x10568, 0x0},
+ {0x10569, 0x0},
+ {0x10668, 0x0},
+ {0x10669, 0x0},
+ {0x10768, 0x0},
+ {0x10769, 0x0},
+ {0x10868, 0x0},
+ {0x10869, 0x0},
+ {0x100aa, 0x0},
+ {0x10062, 0x0},
+ {0x10001, 0x0},
+ {0x100a0, 0x0},
+ {0x100a1, 0x0},
+ {0x100a2, 0x0},
+ {0x100a3, 0x0},
+ {0x100a4, 0x0},
+ {0x100a5, 0x0},
+ {0x100a6, 0x0},
+ {0x100a7, 0x0},
+ {0x11068, 0x0},
+ {0x11069, 0x0},
+ {0x11168, 0x0},
+ {0x11169, 0x0},
+ {0x11268, 0x0},
+ {0x11269, 0x0},
+ {0x11368, 0x0},
+ {0x11369, 0x0},
+ {0x11468, 0x0},
+ {0x11469, 0x0},
+ {0x11568, 0x0},
+ {0x11569, 0x0},
+ {0x11668, 0x0},
+ {0x11669, 0x0},
+ {0x11768, 0x0},
+ {0x11769, 0x0},
+ {0x11868, 0x0},
+ {0x11869, 0x0},
+ {0x110aa, 0x0},
+ {0x11062, 0x0},
+ {0x11001, 0x0},
+ {0x110a0, 0x0},
+ {0x110a1, 0x0},
+ {0x110a2, 0x0},
+ {0x110a3, 0x0},
+ {0x110a4, 0x0},
+ {0x110a5, 0x0},
+ {0x110a6, 0x0},
+ {0x110a7, 0x0},
+ {0x80, 0x0},
+ {0x1080, 0x0},
+ {0x2080, 0x0},
+ {0x10020, 0x0},
+ {0x10080, 0x0},
+ {0x10081, 0x0},
+ {0x100d0, 0x0},
+ {0x100d1, 0x0},
+ {0x1008c, 0x0},
+ {0x1008d, 0x0},
+ {0x10180, 0x0},
+ {0x10181, 0x0},
+ {0x101d0, 0x0},
+ {0x101d1, 0x0},
+ {0x1018c, 0x0},
+ {0x1018d, 0x0},
+ {0x100c0, 0x0},
+ {0x100c1, 0x0},
+ {0x101c0, 0x0},
+ {0x101c1, 0x0},
+ {0x102c0, 0x0},
+ {0x102c1, 0x0},
+ {0x103c0, 0x0},
+ {0x103c1, 0x0},
+ {0x104c0, 0x0},
+ {0x104c1, 0x0},
+ {0x105c0, 0x0},
+ {0x105c1, 0x0},
+ {0x106c0, 0x0},
+ {0x106c1, 0x0},
+ {0x107c0, 0x0},
+ {0x107c1, 0x0},
+ {0x108c0, 0x0},
+ {0x108c1, 0x0},
+ {0x100ae, 0x0},
+ {0x100af, 0x0},
+ {0x11020, 0x0},
+ {0x11080, 0x0},
+ {0x11081, 0x0},
+ {0x110d0, 0x0},
+ {0x110d1, 0x0},
+ {0x1108c, 0x0},
+ {0x1108d, 0x0},
+ {0x11180, 0x0},
+ {0x11181, 0x0},
+ {0x111d0, 0x0},
+ {0x111d1, 0x0},
+ {0x1118c, 0x0},
+ {0x1118d, 0x0},
+ {0x110c0, 0x0},
+ {0x110c1, 0x0},
+ {0x111c0, 0x0},
+ {0x111c1, 0x0},
+ {0x112c0, 0x0},
+ {0x112c1, 0x0},
+ {0x113c0, 0x0},
+ {0x113c1, 0x0},
+ {0x114c0, 0x0},
+ {0x114c1, 0x0},
+ {0x115c0, 0x0},
+ {0x115c1, 0x0},
+ {0x116c0, 0x0},
+ {0x116c1, 0x0},
+ {0x117c0, 0x0},
+ {0x117c1, 0x0},
+ {0x118c0, 0x0},
+ {0x118c1, 0x0},
+ {0x110ae, 0x0},
+ {0x110af, 0x0},
+ {0x90201, 0x0},
+ {0x90202, 0x0},
+ {0x90203, 0x0},
+ {0x90205, 0x0},
+ {0x90206, 0x0},
+ {0x90207, 0x0},
+ {0x90208, 0x0},
+ {0x20020, 0x0},
+ {0x100080, 0x0},
+ {0x101080, 0x0},
+ {0x102080, 0x0},
+ {0x110020, 0x0},
+ {0x110080, 0x0},
+ {0x110081, 0x0},
+ {0x1100d0, 0x0},
+ {0x1100d1, 0x0},
+ {0x11008c, 0x0},
+ {0x11008d, 0x0},
+ {0x110180, 0x0},
+ {0x110181, 0x0},
+ {0x1101d0, 0x0},
+ {0x1101d1, 0x0},
+ {0x11018c, 0x0},
+ {0x11018d, 0x0},
+ {0x1100c0, 0x0},
+ {0x1100c1, 0x0},
+ {0x1101c0, 0x0},
+ {0x1101c1, 0x0},
+ {0x1102c0, 0x0},
+ {0x1102c1, 0x0},
+ {0x1103c0, 0x0},
+ {0x1103c1, 0x0},
+ {0x1104c0, 0x0},
+ {0x1104c1, 0x0},
+ {0x1105c0, 0x0},
+ {0x1105c1, 0x0},
+ {0x1106c0, 0x0},
+ {0x1106c1, 0x0},
+ {0x1107c0, 0x0},
+ {0x1107c1, 0x0},
+ {0x1108c0, 0x0},
+ {0x1108c1, 0x0},
+ {0x1100ae, 0x0},
+ {0x1100af, 0x0},
+ {0x111020, 0x0},
+ {0x111080, 0x0},
+ {0x111081, 0x0},
+ {0x1110d0, 0x0},
+ {0x1110d1, 0x0},
+ {0x11108c, 0x0},
+ {0x11108d, 0x0},
+ {0x111180, 0x0},
+ {0x111181, 0x0},
+ {0x1111d0, 0x0},
+ {0x1111d1, 0x0},
+ {0x11118c, 0x0},
+ {0x11118d, 0x0},
+ {0x1110c0, 0x0},
+ {0x1110c1, 0x0},
+ {0x1111c0, 0x0},
+ {0x1111c1, 0x0},
+ {0x1112c0, 0x0},
+ {0x1112c1, 0x0},
+ {0x1113c0, 0x0},
+ {0x1113c1, 0x0},
+ {0x1114c0, 0x0},
+ {0x1114c1, 0x0},
+ {0x1115c0, 0x0},
+ {0x1115c1, 0x0},
+ {0x1116c0, 0x0},
+ {0x1116c1, 0x0},
+ {0x1117c0, 0x0},
+ {0x1117c1, 0x0},
+ {0x1118c0, 0x0},
+ {0x1118c1, 0x0},
+ {0x1110ae, 0x0},
+ {0x1110af, 0x0},
+ {0x190201, 0x0},
+ {0x190202, 0x0},
+ {0x190203, 0x0},
+ {0x190205, 0x0},
+ {0x190206, 0x0},
+ {0x190207, 0x0},
+ {0x190208, 0x0},
+ {0x120020, 0x0},
+ {0x200080, 0x0},
+ {0x201080, 0x0},
+ {0x202080, 0x0},
+ {0x210020, 0x0},
+ {0x210080, 0x0},
+ {0x210081, 0x0},
+ {0x2100d0, 0x0},
+ {0x2100d1, 0x0},
+ {0x21008c, 0x0},
+ {0x21008d, 0x0},
+ {0x210180, 0x0},
+ {0x210181, 0x0},
+ {0x2101d0, 0x0},
+ {0x2101d1, 0x0},
+ {0x21018c, 0x0},
+ {0x21018d, 0x0},
+ {0x2100c0, 0x0},
+ {0x2100c1, 0x0},
+ {0x2101c0, 0x0},
+ {0x2101c1, 0x0},
+ {0x2102c0, 0x0},
+ {0x2102c1, 0x0},
+ {0x2103c0, 0x0},
+ {0x2103c1, 0x0},
+ {0x2104c0, 0x0},
+ {0x2104c1, 0x0},
+ {0x2105c0, 0x0},
+ {0x2105c1, 0x0},
+ {0x2106c0, 0x0},
+ {0x2106c1, 0x0},
+ {0x2107c0, 0x0},
+ {0x2107c1, 0x0},
+ {0x2108c0, 0x0},
+ {0x2108c1, 0x0},
+ {0x2100ae, 0x0},
+ {0x2100af, 0x0},
+ {0x211020, 0x0},
+ {0x211080, 0x0},
+ {0x211081, 0x0},
+ {0x2110d0, 0x0},
+ {0x2110d1, 0x0},
+ {0x21108c, 0x0},
+ {0x21108d, 0x0},
+ {0x211180, 0x0},
+ {0x211181, 0x0},
+ {0x2111d0, 0x0},
+ {0x2111d1, 0x0},
+ {0x21118c, 0x0},
+ {0x21118d, 0x0},
+ {0x2110c0, 0x0},
+ {0x2110c1, 0x0},
+ {0x2111c0, 0x0},
+ {0x2111c1, 0x0},
+ {0x2112c0, 0x0},
+ {0x2112c1, 0x0},
+ {0x2113c0, 0x0},
+ {0x2113c1, 0x0},
+ {0x2114c0, 0x0},
+ {0x2114c1, 0x0},
+ {0x2115c0, 0x0},
+ {0x2115c1, 0x0},
+ {0x2116c0, 0x0},
+ {0x2116c1, 0x0},
+ {0x2117c0, 0x0},
+ {0x2117c1, 0x0},
+ {0x2118c0, 0x0},
+ {0x2118c1, 0x0},
+ {0x2110ae, 0x0},
+ {0x2110af, 0x0},
+ {0x290201, 0x0},
+ {0x290202, 0x0},
+ {0x290203, 0x0},
+ {0x290205, 0x0},
+ {0x290206, 0x0},
+ {0x290207, 0x0},
+ {0x290208, 0x0},
+ {0x220020, 0x0},
+ {0x20077, 0x0},
+ {0x20072, 0x0},
+ {0x20073, 0x0},
+ {0x400c0, 0x0},
+ {0x10040, 0x0},
+ {0x10140, 0x0},
+ {0x10240, 0x0},
+ {0x10340, 0x0},
+ {0x10440, 0x0},
+ {0x10540, 0x0},
+ {0x10640, 0x0},
+ {0x10740, 0x0},
+ {0x10840, 0x0},
+ {0x11040, 0x0},
+ {0x11140, 0x0},
+ {0x11240, 0x0},
+ {0x11340, 0x0},
+ {0x11440, 0x0},
+ {0x11540, 0x0},
+ {0x11640, 0x0},
+ {0x11740, 0x0},
+ {0x11840, 0x0},
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x960},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x131f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x24c4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x24c4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xc400},
+ {0x54033, 0x3324},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xc400},
+ {0x54039, 0x3324},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P1 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x1},
+ {0x54003, 0x4b0},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x52a4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x52a4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xa400},
+ {0x54033, 0x3352},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xa400},
+ {0x54039, 0x3352},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P2 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x102},
+ {0x54003, 0x270},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4800},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4800},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x3309},
+ {0x54034, 0x4600},
+ {0x54035, 0x11},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x3309},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x11},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54003, 0x960},
+ {0x54004, 0x4},
+ {0x54006, 0x15},
+ {0x54008, 0x61},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54010, 0x2080},
+ {0x54012, 0x110},
+ {0x54019, 0x24c4},
+ {0x5401a, 0x33},
+ {0x5401b, 0x1146},
+ {0x5401c, 0x4808},
+ {0x5401e, 0x4},
+ {0x5401f, 0x24c4},
+ {0x54020, 0x33},
+ {0x54021, 0x1146},
+ {0x54022, 0x4808},
+ {0x54024, 0x4},
+ {0x54032, 0xc400},
+ {0x54033, 0x3324},
+ {0x54034, 0x4600},
+ {0x54035, 0x811},
+ {0x54036, 0x48},
+ {0x54037, 0x400},
+ {0x54038, 0xc400},
+ {0x54039, 0x3324},
+ {0x5403a, 0x4600},
+ {0x5403b, 0x811},
+ {0x5403c, 0x48},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+ {0xd0000, 0x0},
+ {0x90000, 0x10},
+ {0x90001, 0x400},
+ {0x90002, 0x10e},
+ {0x90003, 0x0},
+ {0x90004, 0x0},
+ {0x90005, 0x8},
+ {0x90029, 0xb},
+ {0x9002a, 0x480},
+ {0x9002b, 0x109},
+ {0x9002c, 0x8},
+ {0x9002d, 0x448},
+ {0x9002e, 0x139},
+ {0x9002f, 0x8},
+ {0x90030, 0x478},
+ {0x90031, 0x109},
+ {0x90032, 0x0},
+ {0x90033, 0xe8},
+ {0x90034, 0x109},
+ {0x90035, 0x2},
+ {0x90036, 0x10},
+ {0x90037, 0x139},
+ {0x90038, 0xb},
+ {0x90039, 0x7c0},
+ {0x9003a, 0x139},
+ {0x9003b, 0x44},
+ {0x9003c, 0x633},
+ {0x9003d, 0x159},
+ {0x9003e, 0x14f},
+ {0x9003f, 0x630},
+ {0x90040, 0x159},
+ {0x90041, 0x47},
+ {0x90042, 0x633},
+ {0x90043, 0x149},
+ {0x90044, 0x4f},
+ {0x90045, 0x633},
+ {0x90046, 0x179},
+ {0x90047, 0x8},
+ {0x90048, 0xe0},
+ {0x90049, 0x109},
+ {0x9004a, 0x0},
+ {0x9004b, 0x7c8},
+ {0x9004c, 0x109},
+ {0x9004d, 0x0},
+ {0x9004e, 0x1},
+ {0x9004f, 0x8},
+ {0x90050, 0x30},
+ {0x90051, 0x65a},
+ {0x90052, 0x9},
+ {0x90053, 0x0},
+ {0x90054, 0x45a},
+ {0x90055, 0x9},
+ {0x90056, 0x0},
+ {0x90057, 0x448},
+ {0x90058, 0x109},
+ {0x90059, 0x40},
+ {0x9005a, 0x633},
+ {0x9005b, 0x179},
+ {0x9005c, 0x1},
+ {0x9005d, 0x618},
+ {0x9005e, 0x109},
+ {0x9005f, 0x40c0},
+ {0x90060, 0x633},
+ {0x90061, 0x149},
+ {0x90062, 0x8},
+ {0x90063, 0x4},
+ {0x90064, 0x48},
+ {0x90065, 0x4040},
+ {0x90066, 0x633},
+ {0x90067, 0x149},
+ {0x90068, 0x0},
+ {0x90069, 0x4},
+ {0x9006a, 0x48},
+ {0x9006b, 0x40},
+ {0x9006c, 0x633},
+ {0x9006d, 0x149},
+ {0x9006e, 0x0},
+ {0x9006f, 0x658},
+ {0x90070, 0x109},
+ {0x90071, 0x10},
+ {0x90072, 0x4},
+ {0x90073, 0x18},
+ {0x90074, 0x0},
+ {0x90075, 0x4},
+ {0x90076, 0x78},
+ {0x90077, 0x549},
+ {0x90078, 0x633},
+ {0x90079, 0x159},
+ {0x9007a, 0xd49},
+ {0x9007b, 0x633},
+ {0x9007c, 0x159},
+ {0x9007d, 0x94a},
+ {0x9007e, 0x633},
+ {0x9007f, 0x159},
+ {0x90080, 0x441},
+ {0x90081, 0x633},
+ {0x90082, 0x149},
+ {0x90083, 0x42},
+ {0x90084, 0x633},
+ {0x90085, 0x149},
+ {0x90086, 0x1},
+ {0x90087, 0x633},
+ {0x90088, 0x149},
+ {0x90089, 0x0},
+ {0x9008a, 0xe0},
+ {0x9008b, 0x109},
+ {0x9008c, 0xa},
+ {0x9008d, 0x10},
+ {0x9008e, 0x109},
+ {0x9008f, 0x9},
+ {0x90090, 0x3c0},
+ {0x90091, 0x149},
+ {0x90092, 0x9},
+ {0x90093, 0x3c0},
+ {0x90094, 0x159},
+ {0x90095, 0x18},
+ {0x90096, 0x10},
+ {0x90097, 0x109},
+ {0x90098, 0x0},
+ {0x90099, 0x3c0},
+ {0x9009a, 0x109},
+ {0x9009b, 0x18},
+ {0x9009c, 0x4},
+ {0x9009d, 0x48},
+ {0x9009e, 0x18},
+ {0x9009f, 0x4},
+ {0x900a0, 0x58},
+ {0x900a1, 0xb},
+ {0x900a2, 0x10},
+ {0x900a3, 0x109},
+ {0x900a4, 0x1},
+ {0x900a5, 0x10},
+ {0x900a6, 0x109},
+ {0x900a7, 0x5},
+ {0x900a8, 0x7c0},
+ {0x900a9, 0x109},
+ {0x40000, 0x811},
+ {0x40020, 0x880},
+ {0x40040, 0x0},
+ {0x40060, 0x0},
+ {0x40001, 0x4008},
+ {0x40021, 0x83},
+ {0x40041, 0x4f},
+ {0x40061, 0x0},
+ {0x40002, 0x4040},
+ {0x40022, 0x83},
+ {0x40042, 0x51},
+ {0x40062, 0x0},
+ {0x40003, 0x811},
+ {0x40023, 0x880},
+ {0x40043, 0x0},
+ {0x40063, 0x0},
+ {0x40004, 0x720},
+ {0x40024, 0xf},
+ {0x40044, 0x1740},
+ {0x40064, 0x0},
+ {0x40005, 0x16},
+ {0x40025, 0x83},
+ {0x40045, 0x4b},
+ {0x40065, 0x0},
+ {0x40006, 0x716},
+ {0x40026, 0xf},
+ {0x40046, 0x2001},
+ {0x40066, 0x0},
+ {0x40007, 0x716},
+ {0x40027, 0xf},
+ {0x40047, 0x2800},
+ {0x40067, 0x0},
+ {0x40008, 0x716},
+ {0x40028, 0xf},
+ {0x40048, 0xf00},
+ {0x40068, 0x0},
+ {0x40009, 0x720},
+ {0x40029, 0xf},
+ {0x40049, 0x1400},
+ {0x40069, 0x0},
+ {0x4000a, 0xe08},
+ {0x4002a, 0xc15},
+ {0x4004a, 0x0},
+ {0x4006a, 0x0},
+ {0x4000b, 0x625},
+ {0x4002b, 0x15},
+ {0x4004b, 0x0},
+ {0x4006b, 0x0},
+ {0x4000c, 0x4028},
+ {0x4002c, 0x80},
+ {0x4004c, 0x0},
+ {0x4006c, 0x0},
+ {0x4000d, 0xe08},
+ {0x4002d, 0xc1a},
+ {0x4004d, 0x0},
+ {0x4006d, 0x0},
+ {0x4000e, 0x625},
+ {0x4002e, 0x1a},
+ {0x4004e, 0x0},
+ {0x4006e, 0x0},
+ {0x4000f, 0x4040},
+ {0x4002f, 0x80},
+ {0x4004f, 0x0},
+ {0x4006f, 0x0},
+ {0x40010, 0x2604},
+ {0x40030, 0x15},
+ {0x40050, 0x0},
+ {0x40070, 0x0},
+ {0x40011, 0x708},
+ {0x40031, 0x5},
+ {0x40051, 0x0},
+ {0x40071, 0x2002},
+ {0x40012, 0x8},
+ {0x40032, 0x80},
+ {0x40052, 0x0},
+ {0x40072, 0x0},
+ {0x40013, 0x2604},
+ {0x40033, 0x1a},
+ {0x40053, 0x0},
+ {0x40073, 0x0},
+ {0x40014, 0x708},
+ {0x40034, 0xa},
+ {0x40054, 0x0},
+ {0x40074, 0x2002},
+ {0x40015, 0x4040},
+ {0x40035, 0x80},
+ {0x40055, 0x0},
+ {0x40075, 0x0},
+ {0x40016, 0x60a},
+ {0x40036, 0x15},
+ {0x40056, 0x1200},
+ {0x40076, 0x0},
+ {0x40017, 0x61a},
+ {0x40037, 0x15},
+ {0x40057, 0x1300},
+ {0x40077, 0x0},
+ {0x40018, 0x60a},
+ {0x40038, 0x1a},
+ {0x40058, 0x1200},
+ {0x40078, 0x0},
+ {0x40019, 0x642},
+ {0x40039, 0x1a},
+ {0x40059, 0x1300},
+ {0x40079, 0x0},
+ {0x4001a, 0x4808},
+ {0x4003a, 0x880},
+ {0x4005a, 0x0},
+ {0x4007a, 0x0},
+ {0x900aa, 0x0},
+ {0x900ab, 0x790},
+ {0x900ac, 0x11a},
+ {0x900ad, 0x8},
+ {0x900ae, 0x7aa},
+ {0x900af, 0x2a},
+ {0x900b0, 0x10},
+ {0x900b1, 0x7b2},
+ {0x900b2, 0x2a},
+ {0x900b3, 0x0},
+ {0x900b4, 0x7c8},
+ {0x900b5, 0x109},
+ {0x900b6, 0x10},
+ {0x900b7, 0x10},
+ {0x900b8, 0x109},
+ {0x900b9, 0x10},
+ {0x900ba, 0x2a8},
+ {0x900bb, 0x129},
+ {0x900bc, 0x8},
+ {0x900bd, 0x370},
+ {0x900be, 0x129},
+ {0x900bf, 0xa},
+ {0x900c0, 0x3c8},
+ {0x900c1, 0x1a9},
+ {0x900c2, 0xc},
+ {0x900c3, 0x408},
+ {0x900c4, 0x199},
+ {0x900c5, 0x14},
+ {0x900c6, 0x790},
+ {0x900c7, 0x11a},
+ {0x900c8, 0x8},
+ {0x900c9, 0x4},
+ {0x900ca, 0x18},
+ {0x900cb, 0xe},
+ {0x900cc, 0x408},
+ {0x900cd, 0x199},
+ {0x900ce, 0x8},
+ {0x900cf, 0x8568},
+ {0x900d0, 0x108},
+ {0x900d1, 0x18},
+ {0x900d2, 0x790},
+ {0x900d3, 0x16a},
+ {0x900d4, 0x8},
+ {0x900d5, 0x1d8},
+ {0x900d6, 0x169},
+ {0x900d7, 0x10},
+ {0x900d8, 0x8558},
+ {0x900d9, 0x168},
+ {0x900da, 0x1ff8},
+ {0x900db, 0x85a8},
+ {0x900dc, 0x1e8},
+ {0x900dd, 0x50},
+ {0x900de, 0x798},
+ {0x900df, 0x16a},
+ {0x900e0, 0x60},
+ {0x900e1, 0x7a0},
+ {0x900e2, 0x16a},
+ {0x900e3, 0x8},
+ {0x900e4, 0x8310},
+ {0x900e5, 0x168},
+ {0x900e6, 0x8},
+ {0x900e7, 0xa310},
+ {0x900e8, 0x168},
+ {0x900e9, 0xa},
+ {0x900ea, 0x408},
+ {0x900eb, 0x169},
+ {0x900ec, 0x6e},
+ {0x900ed, 0x0},
+ {0x900ee, 0x68},
+ {0x900ef, 0x0},
+ {0x900f0, 0x408},
+ {0x900f1, 0x169},
+ {0x900f2, 0x0},
+ {0x900f3, 0x8310},
+ {0x900f4, 0x168},
+ {0x900f5, 0x0},
+ {0x900f6, 0xa310},
+ {0x900f7, 0x168},
+ {0x900f8, 0x1ff8},
+ {0x900f9, 0x85a8},
+ {0x900fa, 0x1e8},
+ {0x900fb, 0x68},
+ {0x900fc, 0x798},
+ {0x900fd, 0x16a},
+ {0x900fe, 0x78},
+ {0x900ff, 0x7a0},
+ {0x90100, 0x16a},
+ {0x90101, 0x68},
+ {0x90102, 0x790},
+ {0x90103, 0x16a},
+ {0x90104, 0x8},
+ {0x90105, 0x8b10},
+ {0x90106, 0x168},
+ {0x90107, 0x8},
+ {0x90108, 0xab10},
+ {0x90109, 0x168},
+ {0x9010a, 0xa},
+ {0x9010b, 0x408},
+ {0x9010c, 0x169},
+ {0x9010d, 0x58},
+ {0x9010e, 0x0},
+ {0x9010f, 0x68},
+ {0x90110, 0x0},
+ {0x90111, 0x408},
+ {0x90112, 0x169},
+ {0x90113, 0x0},
+ {0x90114, 0x8b10},
+ {0x90115, 0x168},
+ {0x90116, 0x1},
+ {0x90117, 0xab10},
+ {0x90118, 0x168},
+ {0x90119, 0x0},
+ {0x9011a, 0x1d8},
+ {0x9011b, 0x169},
+ {0x9011c, 0x80},
+ {0x9011d, 0x790},
+ {0x9011e, 0x16a},
+ {0x9011f, 0x18},
+ {0x90120, 0x7aa},
+ {0x90121, 0x6a},
+ {0x90122, 0xa},
+ {0x90123, 0x0},
+ {0x90124, 0x1e9},
+ {0x90125, 0x8},
+ {0x90126, 0x8080},
+ {0x90127, 0x108},
+ {0x90128, 0xf},
+ {0x90129, 0x408},
+ {0x9012a, 0x169},
+ {0x9012b, 0xc},
+ {0x9012c, 0x0},
+ {0x9012d, 0x68},
+ {0x9012e, 0x9},
+ {0x9012f, 0x0},
+ {0x90130, 0x1a9},
+ {0x90131, 0x0},
+ {0x90132, 0x408},
+ {0x90133, 0x169},
+ {0x90134, 0x0},
+ {0x90135, 0x8080},
+ {0x90136, 0x108},
+ {0x90137, 0x8},
+ {0x90138, 0x7aa},
+ {0x90139, 0x6a},
+ {0x9013a, 0x0},
+ {0x9013b, 0x8568},
+ {0x9013c, 0x108},
+ {0x9013d, 0xb7},
+ {0x9013e, 0x790},
+ {0x9013f, 0x16a},
+ {0x90140, 0x1f},
+ {0x90141, 0x0},
+ {0x90142, 0x68},
+ {0x90143, 0x8},
+ {0x90144, 0x8558},
+ {0x90145, 0x168},
+ {0x90146, 0xf},
+ {0x90147, 0x408},
+ {0x90148, 0x169},
+ {0x90149, 0xd},
+ {0x9014a, 0x0},
+ {0x9014b, 0x68},
+ {0x9014c, 0x0},
+ {0x9014d, 0x408},
+ {0x9014e, 0x169},
+ {0x9014f, 0x0},
+ {0x90150, 0x8558},
+ {0x90151, 0x168},
+ {0x90152, 0x8},
+ {0x90153, 0x3c8},
+ {0x90154, 0x1a9},
+ {0x90155, 0x3},
+ {0x90156, 0x370},
+ {0x90157, 0x129},
+ {0x90158, 0x20},
+ {0x90159, 0x2aa},
+ {0x9015a, 0x9},
+ {0x9015b, 0x8},
+ {0x9015c, 0xe8},
+ {0x9015d, 0x109},
+ {0x9015e, 0x0},
+ {0x9015f, 0x8140},
+ {0x90160, 0x10c},
+ {0x90161, 0x10},
+ {0x90162, 0x8138},
+ {0x90163, 0x104},
+ {0x90164, 0x8},
+ {0x90165, 0x448},
+ {0x90166, 0x109},
+ {0x90167, 0xf},
+ {0x90168, 0x7c0},
+ {0x90169, 0x109},
+ {0x9016a, 0x0},
+ {0x9016b, 0xe8},
+ {0x9016c, 0x109},
+ {0x9016d, 0x47},
+ {0x9016e, 0x630},
+ {0x9016f, 0x109},
+ {0x90170, 0x8},
+ {0x90171, 0x618},
+ {0x90172, 0x109},
+ {0x90173, 0x8},
+ {0x90174, 0xe0},
+ {0x90175, 0x109},
+ {0x90176, 0x0},
+ {0x90177, 0x7c8},
+ {0x90178, 0x109},
+ {0x90179, 0x8},
+ {0x9017a, 0x8140},
+ {0x9017b, 0x10c},
+ {0x9017c, 0x0},
+ {0x9017d, 0x478},
+ {0x9017e, 0x109},
+ {0x9017f, 0x0},
+ {0x90180, 0x1},
+ {0x90181, 0x8},
+ {0x90182, 0x8},
+ {0x90183, 0x4},
+ {0x90184, 0x0},
+ {0x90006, 0x8},
+ {0x90007, 0x7c8},
+ {0x90008, 0x109},
+ {0x90009, 0x0},
+ {0x9000a, 0x400},
+ {0x9000b, 0x106},
+ {0xd00e7, 0x400},
+ {0x90017, 0x0},
+ {0x9001f, 0x2b},
+ {0x90026, 0x69},
+ {0x400d0, 0x0},
+ {0x400d1, 0x101},
+ {0x400d2, 0x105},
+ {0x400d3, 0x107},
+ {0x400d4, 0x10f},
+ {0x400d5, 0x202},
+ {0x400d6, 0x20a},
+ {0x400d7, 0x20b},
+ {0x2003a, 0x2},
+ {0x200be, 0x3},
+ {0x2000b, 0x2a3},
+ {0x2000c, 0x96},
+ {0x2000d, 0x5dc},
+ {0x2000e, 0x2c},
+ {0x12000b, 0x152},
+ {0x12000c, 0x4b},
+ {0x12000d, 0x2ee},
+ {0x12000e, 0x2c},
+ {0x22000b, 0xb0},
+ {0x22000c, 0x27},
+ {0x22000d, 0x186},
+ {0x22000e, 0x10},
+ {0x9000c, 0x0},
+ {0x9000d, 0x173},
+ {0x9000e, 0x60},
+ {0x9000f, 0x6110},
+ {0x90010, 0x2152},
+ {0x90011, 0xdfbd},
+ {0x90012, 0x2060},
+ {0x90013, 0x6152},
+ {0x20010, 0x5a},
+ {0x20011, 0x3},
+ {0x120010, 0x5a},
+ {0x120011, 0x3},
+ {0x40080, 0xe0},
+ {0x40081, 0x12},
+ {0x40082, 0xe0},
+ {0x40083, 0x12},
+ {0x40084, 0xe0},
+ {0x40085, 0x12},
+ {0x140080, 0xe0},
+ {0x140081, 0x12},
+ {0x140082, 0xe0},
+ {0x140083, 0x12},
+ {0x140084, 0xe0},
+ {0x140085, 0x12},
+ {0x240080, 0xe0},
+ {0x240081, 0x12},
+ {0x240082, 0xe0},
+ {0x240083, 0x12},
+ {0x240084, 0xe0},
+ {0x240085, 0x12},
+ {0x400fd, 0xf},
+ {0x400f1, 0xe},
+ {0x10011, 0x1},
+ {0x10012, 0x1},
+ {0x10013, 0x180},
+ {0x10018, 0x1},
+ {0x10002, 0x6209},
+ {0x100b2, 0x1},
+ {0x101b4, 0x1},
+ {0x102b4, 0x1},
+ {0x103b4, 0x1},
+ {0x104b4, 0x1},
+ {0x105b4, 0x1},
+ {0x106b4, 0x1},
+ {0x107b4, 0x1},
+ {0x108b4, 0x1},
+ {0x11011, 0x1},
+ {0x11012, 0x1},
+ {0x11013, 0x180},
+ {0x11018, 0x1},
+ {0x11002, 0x6209},
+ {0x110b2, 0x1},
+ {0x111b4, 0x1},
+ {0x112b4, 0x1},
+ {0x113b4, 0x1},
+ {0x114b4, 0x1},
+ {0x115b4, 0x1},
+ {0x116b4, 0x1},
+ {0x117b4, 0x1},
+ {0x118b4, 0x1},
+ {0x20089, 0x1},
+ {0x20088, 0x19},
+ {0xc0080, 0x0},
+ {0xd0000, 0x1},
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+ {
+ /* P0 2400mts 1D */
+ .drate = 2400,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+ },
+ {
+ /* P1 1200mts 1D */
+ .drate = 1200,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+ },
+ {
+ /* P2 625mts 1D */
+ .drate = 625,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+ },
+ {
+ /* P0 2400mts 2D */
+ .drate = 2400,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = ddr_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+ },
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+ .ddrc_cfg = ddr_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+ .ddrphy_cfg = ddr_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+ .fsp_msg = ddr_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+ .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+ .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+ .ddrphy_pie = ddr_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+ .fsp_table = { 2400, 1200, 625, },
+ .fsp_cfg = ddr_dram_fsp_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
diff --git a/board/freescale/imx91_evk/spl.c b/board/freescale/imx91_evk/spl.c
new file mode 100644
index 0000000..46bde93
--- /dev/null
+++ b/board/freescale/imx91_evk/spl.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/mu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch-mx7ulp/gpio.h>
+#include <asm/mach-imx/ele_api.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/ddr.h>
+#include <power/pmic.h>
+#include <power/pca9450.h>
+#include <asm/arch/trdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+ return BOOT_DEVICE_BOOTROM;
+}
+
+void spl_board_init(void)
+{
+ int ret;
+
+ ret = ele_start_rng();
+ if (ret)
+ printf("Fail to start RNG: %d\n", ret);
+
+ puts("Normal Boot\n");
+}
+
+extern struct dram_timing_info dram_timing_1600mts;
+void spl_dram_init(void)
+{
+ struct dram_timing_info *ptiming = &dram_timing;
+
+ if (is_voltage_mode(VOLT_LOW_DRIVE))
+ ptiming = &dram_timing_1600mts;
+
+ printf("DDR: %uMTS\n", ptiming->fsp_msg[0].drate);
+ ddr_init(ptiming);
+}
+
+#if CONFIG_IS_ENABLED(DM_PMIC_PCA9450)
+int power_init_board(void)
+{
+ struct udevice *dev;
+ int ret;
+ unsigned int val = 0, buck_val;
+
+ ret = pmic_get("pmic@25", &dev);
+ if (ret == -ENODEV) {
+ puts("ERROR: Get PMIC PCA9451A failed!\n");
+ return ret;
+ }
+ if (ret != 0)
+ return ret;
+
+ /* BUCKxOUT_DVS0/1 control BUCK123 output */
+ pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
+
+ /* enable DVS control through PMIC_STBY_REQ */
+ pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
+
+ ret = pmic_reg_read(dev, PCA9450_PWR_CTRL);
+ if (ret < 0)
+ return ret;
+
+ val = ret;
+
+ if (is_voltage_mode(VOLT_LOW_DRIVE)) {
+ buck_val = 0x0c; /* 0.8V for Low drive mode */
+ printf("PMIC: Low Drive Voltage Mode\n");
+ } else if (is_voltage_mode(VOLT_NOMINAL_DRIVE)) {
+ buck_val = 0x10; /* 0.85V for Nominal drive mode */
+ printf("PMIC: Nominal Voltage Mode\n");
+ } else {
+ buck_val = 0x14; /* 0.9V for Over drive mode */
+ printf("PMIC: Over Drive Voltage Mode\n");
+ }
+
+ if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+ pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, buck_val);
+ pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, buck_val);
+ } else {
+ pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, buck_val + 0x4);
+ pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, buck_val + 0x4);
+ }
+
+ /* Set VDDQ to 1.1V from buck2 (buck2 not used for iMX91 EVK) */
+ pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x28);
+
+ /* set standby voltage to 0.65V */
+ if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
+ pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
+ else
+ pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
+
+ /* I2C_LT_EN*/
+ pmic_reg_write(dev, 0xa, 0x3);
+ return 0;
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+ int ret;
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ timer_init();
+
+ arch_cpu_init();
+
+ spl_early_init();
+
+ preloader_console_init();
+
+ ret = imx9_probe_mu();
+ if (ret) {
+ printf("Fail to init ELE API\n");
+ } else {
+ debug("SOC: 0x%x\n", gd->arch.soc_rev);
+ debug("LC: 0x%x\n", gd->arch.lifecycle);
+ }
+
+ clock_init_late();
+
+ power_init_board();
+
+ if (!is_voltage_mode(VOLT_LOW_DRIVE))
+ set_arm_clk(get_cpu_speed_grade_hz());
+
+ /* Init power of mix */
+ soc_power_init();
+
+ /* Setup TRDC for DDR access */
+ trdc_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ board_init_r(NULL, 0);
+}
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
old mode 100755
new mode 100644
diff --git a/board/google/chromebook_coral/coral.c b/board/google/chromebook_coral/coral.c
index 3443dc9..db96534 100644
--- a/board/google/chromebook_coral/coral.c
+++ b/board/google/chromebook_coral/coral.c
@@ -151,8 +151,8 @@
return -ENOSYS;
switch (id) {
- case SYSINFO_ID_SMBIOS_SYSTEM_VERSION:
- case SYSINFO_ID_SMBIOS_BASEBOARD_VERSION: {
+ case SYSID_SM_SYSTEM_VERSION:
+ case SYSID_SM_BASEBOARD_VERSION: {
ret = get_skuconfig(dev);
if (ret < 0)
@@ -162,7 +162,7 @@
sprintf(val, "rev%d", ret);
break;
}
- case SYSINFO_ID_BOARD_MODEL: {
+ case SYSID_BOARD_MODEL: {
int mem_config, sku_config;
const char *model;
diff --git a/board/phytec/common/Kconfig b/board/phytec/common/Kconfig
index f394ace..bc55117 100644
--- a/board/phytec/common/Kconfig
+++ b/board/phytec/common/Kconfig
@@ -19,6 +19,14 @@
Support of I2C EEPROM based SoM detection. Supported
for PHYTEC i.MX8MM/i.MX8MP boards
+config PHYTEC_IMX93_SOM_DETECTION
+ bool "Support SoM detection for i.MX93 PHYTEC platforms"
+ depends on ARCH_IMX9 && PHYTEC_SOM_DETECTION
+ default y
+ help
+ Support of I2C EEPROM based SoM detection. Supported
+ for PHYTEC i.MX93 based boards
+
config PHYTEC_AM62_SOM_DETECTION
bool "Support SoM detection for AM62x PHYTEC platforms"
depends on (TARGET_PHYCORE_AM62X_A53 || TARGET_PHYCORE_AM62X_R5) && \
diff --git a/board/phytec/common/Makefile b/board/phytec/common/Makefile
index cd78f76..8126f73 100644
--- a/board/phytec/common/Makefile
+++ b/board/phytec/common/Makefile
@@ -10,3 +10,4 @@
obj-y += phytec_som_detection.o phytec_som_detection_blocks.o
obj-$(CONFIG_ARCH_K3) += am6_som_detection.o k3/
obj-$(CONFIG_ARCH_IMX8M) += imx8m_som_detection.o
+obj-$(CONFIG_ARCH_IMX9) += imx93_som_detection.o
diff --git a/board/phytec/common/imx93_som_detection.c b/board/phytec/common/imx93_som_detection.c
new file mode 100644
index 0000000..eb9574d
--- /dev/null
+++ b/board/phytec/common/imx93_som_detection.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+#include <asm/arch/sys_proto.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <i2c.h>
+#include <u-boot/crc.h>
+
+#include "imx93_som_detection.h"
+
+extern struct phytec_eeprom_data eeprom_data;
+
+#if IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION)
+
+/* Check if the SoM is actually one of the following products:
+ * - i.MX93
+ *
+ * Returns 0 in case it's a known SoM. Otherwise, returns 1.
+ */
+u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data)
+{
+ u8 som;
+
+ if (!data)
+ data = &eeprom_data;
+
+ /* Early API revisions are not supported */
+ if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2)
+ return 1;
+
+ som = data->payload.data.data_api2.som_no;
+ debug("%s: som id: %u\n", __func__, som);
+
+ if (som == PHYTEC_IMX93_SOM && is_imx93())
+ return 0;
+
+ pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n", __func__);
+ return 1;
+}
+
+/*
+ * Filter PHYTEC i.MX93 SoM options by option index
+ *
+ * Returns:
+ * - option value
+ * - PHYTEC_EEPROM_INVAL when the data is invalid
+ *
+ */
+u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data,
+ enum phytec_imx93_option_index idx)
+{
+ char *opt;
+ u8 opt_id;
+
+ if (!data)
+ data = &eeprom_data;
+
+ if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2)
+ return PHYTEC_EEPROM_INVAL;
+
+ opt = phytec_get_opt(data);
+ if (opt)
+ opt_id = PHYTEC_GET_OPTION(opt[idx]);
+ else
+ opt_id = PHYTEC_EEPROM_INVAL;
+
+ debug("%s: opt[%d] id: %u\n", __func__, idx, opt_id);
+ return opt_id;
+}
+
+/*
+ * Filter PHYTEC i.MX93 SoM voltage
+ *
+ * Returns:
+ * - PHYTEC_IMX93_VOLTAGE_1V8 or PHYTEC_IMX93_VOLTAGE_3V3
+ * - PHYTEC_EEPROM_INVAL when the data is invalid
+ *
+ */
+enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage(struct phytec_eeprom_data *data)
+{
+ u8 option = phytec_imx93_get_opt(data, PHYTEC_IMX93_OPT_FEAT);
+
+ if (option == PHYTEC_EEPROM_INVAL)
+ return PHYTEC_IMX93_VOLTAGE_INVALID;
+ return (option & 0x01) ? PHYTEC_IMX93_VOLTAGE_1V8 : PHYTEC_IMX93_VOLTAGE_3V3;
+}
+
+#else
+
+inline u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data)
+{
+ return 1;
+}
+
+inline u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data,
+ enum phytec_imx93_option_index idx)
+{
+ return PHYTEC_EEPROM_INVAL;
+}
+
+inline enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage
+ (struct phytec_eeprom_data *data)
+{
+ return PHYTEC_EEPROM_INVAL;
+}
+
+#endif /* IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION) */
diff --git a/board/phytec/common/imx93_som_detection.h b/board/phytec/common/imx93_som_detection.h
new file mode 100644
index 0000000..a0803b4
--- /dev/null
+++ b/board/phytec/common/imx93_som_detection.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+#ifndef _PHYTEC_IMX93_SOM_DETECTION_H
+#define _PHYTEC_IMX93_SOM_DETECTION_H
+
+#include "phytec_som_detection.h"
+
+#define PHYTEC_IMX93_SOM 77
+
+enum phytec_imx93_option_index {
+ PHYTEC_IMX93_OPT_DDR = 0,
+ PHYTEC_IMX93_OPT_EMMC = 1,
+ PHYTEC_IMX93_OPT_CPU = 2,
+ PHYTEC_IMX93_OPT_FREQ = 3,
+ PHYTEC_IMX93_OPT_NPU = 4,
+ PHYTEC_IMX93_OPT_DISP = 5,
+ PHYTEC_IMX93_OPT_ETH = 6,
+ PHYTEC_IMX93_OPT_FEAT = 7,
+ PHYTEC_IMX93_OPT_TEMP = 8,
+ PHYTEC_IMX93_OPT_BOOT = 9,
+ PHYTEC_IMX93_OPT_LED = 10,
+ PHYTEC_IMX93_OPT_EEPROM = 11,
+};
+
+enum phytec_imx93_voltage {
+ PHYTEC_IMX93_VOLTAGE_INVALID = PHYTEC_EEPROM_INVAL,
+ PHYTEC_IMX93_VOLTAGE_3V3 = 0,
+ PHYTEC_IMX93_VOLTAGE_1V8 = 1,
+};
+
+enum phytec_imx93_ddr_eeprom_code {
+ PHYTEC_IMX93_DDR_INVALID = PHYTEC_EEPROM_INVAL,
+ PHYTEC_IMX93_LPDDR4X_512MB = 0,
+ PHYTEC_IMX93_LPDDR4X_1GB = 1,
+ PHYTEC_IMX93_LPDDR4X_2GB = 2,
+ PHYTEC_IMX93_LPDDR4_512MB = 3,
+ PHYTEC_IMX93_LPDDR4_1GB = 4,
+ PHYTEC_IMX93_LPDDR4_2GB = 5,
+};
+
+u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data);
+u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data,
+ enum phytec_imx93_option_index idx);
+enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage
+ (struct phytec_eeprom_data *data);
+
+#endif /* _PHYTEC_IMX93_SOM_DETECTION_H */
diff --git a/board/phytec/common/k3/Kconfig b/board/phytec/common/k3/Kconfig
new file mode 100644
index 0000000..282f4b7
--- /dev/null
+++ b/board/phytec/common/k3/Kconfig
@@ -0,0 +1,5 @@
+config PHYTEC_K3_DDR_PATCH
+ bool "Patch DDR timings on PHYTEC K3 SoMs"
+ help
+ Allow to override default DDR timings prior to
+ DDRSS driver probing.
diff --git a/board/phytec/common/k3/Makefile b/board/phytec/common/k3/Makefile
index 40e91a4..6861c70 100644
--- a/board/phytec/common/k3/Makefile
+++ b/board/phytec/common/k3/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y += board.o
-obj-$(CONFIG_K3_DDRSS) += k3_ddrss_patch.o
+obj-$(CONFIG_PHYTEC_K3_DDR_PATCH) += k3_ddrss_patch.o
diff --git a/board/phytec/common/k3/board.c b/board/phytec/common/k3/board.c
index 346b2b6..9ff861c 100644
--- a/board/phytec/common/k3/board.c
+++ b/board/phytec/common/k3/board.c
@@ -4,15 +4,92 @@
* Author: Wadim Egorov <w.egorov@phytec.de>
*/
+#include <efi_loader.h>
#include <env_internal.h>
#include <fdt_support.h>
#include <dm/ofnode.h>
+#include <mtd.h>
#include <spl.h>
#include <malloc.h>
#include <asm/arch/hardware.h>
#include "../am6_som_detection.h"
+#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_image fw_images[] = {
+ {
+ .fw_name = PHYCORE_AM6XX_FW_NAME_TIBOOT3,
+ .image_index = 1,
+ },
+ {
+ .fw_name = PHYCORE_AM6XX_FW_NAME_SPL,
+ .image_index = 2,
+ },
+ {
+ .fw_name = PHYCORE_AM6XX_FW_NAME_UBOOT,
+ .image_index = 3,
+ }
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = NULL,
+ .num_images = ARRAY_SIZE(fw_images),
+ .images = fw_images,
+};
+
+/**
+ * configure_capsule_updates() - Set up the DFU string for capsule updates
+ *
+ * Configures all three bootloader binaries for updates on the current
+ * booted flash device, which may be eMMC, OSPI NOR, or a uSD card. If
+ * booting from USB or Serial, capsule updates will be performed on the
+ * eMMC device.
+ *
+ * Note: Currently, eMMC hardware partitions are not differentiated; Updates
+ * are always applied to the first boot partition.
+ */
+void configure_capsule_updates(void)
+{
+ static char dfu_string[128] = { 0 };
+ const char *dfu_raw = "tiboot3.bin raw 0x0 0x400 mmcpart 1;"
+ "tispl.bin raw 0x400 0x1000 mmcpart 1;"
+ "u-boot.img.raw raw 0x1400 0x2000 mmcpart 1";
+ const char *dfu_fat = "tiboot3.bin fat 1 1;"
+ "tispl.bin fat 1 1;"
+ "u-boot.img fat 1 1";
+ const char *dfu_spi = "tiboot3.bin part 1;"
+ "tispl.bin part 2;"
+ "u-boot.img part 3";
+ u32 boot_device = get_boot_device();
+
+ switch (boot_device) {
+ case BOOT_DEVICE_MMC1:
+ snprintf(dfu_string, 128, "mmc 0=%s", dfu_raw);
+ break;
+ case BOOT_DEVICE_MMC2:
+ snprintf(dfu_string, 128, "mmc 1=%s", dfu_fat);
+ break;
+ case BOOT_DEVICE_SPI:
+ mtd_probe_devices();
+ snprintf(dfu_string, 128, "mtd nor0=%s", dfu_spi);
+ break;
+ default:
+ snprintf(dfu_string, 128, "mmc 0=%s", dfu_raw);
+ break;
+ };
+
+ update_info.dfu_string = dfu_string;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_SET_DFU_ALT_INFO)
+void set_dfu_alt_info(char *interface, char *devstr)
+{
+ if (IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT))
+ env_set("dfu_alt_info", update_info.dfu_string);
+}
+#endif
+
#if IS_ENABLED(CONFIG_ENV_IS_IN_FAT) || IS_ENABLED(CONFIG_ENV_IS_IN_MMC)
int mmc_get_env_dev(void)
{
@@ -94,6 +171,10 @@
}
}
+#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)
+ configure_capsule_updates();
+#endif
+
return 0;
}
#endif
diff --git a/board/phytec/phycore_am62x/Kconfig b/board/phytec/phycore_am62x/Kconfig
index 7c179ef..ecee587 100644
--- a/board/phytec/phycore_am62x/Kconfig
+++ b/board/phytec/phycore_am62x/Kconfig
@@ -33,6 +33,7 @@
default "arch/arm/mach-omap2/u-boot-spl.lds"
source "board/phytec/common/Kconfig"
+source "board/phytec/common/k3/Kconfig"
endif
diff --git a/board/phytec/phycore_imx8mm/Kconfig b/board/phytec/phycore_imx8mm/Kconfig
index 25e4bf2..0644912 100644
--- a/board/phytec/phycore_imx8mm/Kconfig
+++ b/board/phytec/phycore_imx8mm/Kconfig
@@ -12,4 +12,5 @@
config IMX_CONFIG
default "board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg"
+source "board/phytec/common/Kconfig"
endif
diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
new file mode 100644
index 0000000..a7d14e7
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -0,0 +1,65 @@
+#include <env/phytec/rauc.env>
+
+bootcmd=
+ mmc dev ${mmcdev};
+ if mmc rescan; then
+ if test ${doraucboot} = 1; then
+ run raucinit;
+ fi;
+ if run loadimage; then
+ run mmcboot;
+ else
+ run netboot;
+ fi;
+ fi;
+console=ttymxc2,115200
+emmc_dev=2
+fdt_addr_r=0x48000000
+fdtfile=CONFIG_DEFAULT_FDT_FILE
+image=Image
+ip_dyn=yes
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
+mmcargs=
+ setenv bootargs console=${console}
+ root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
+mmcautodetect=yes
+mmcboot=
+ echo Booting from mmc ...;
+ run mmcargs;
+ if run loadfdt; then
+ if test ${dofitboot} = 1; then
+ booti ${loadaddr} - ${fdt_addr_r}
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+ fi;
+mmcdev=CONFIG_SYS_MMC_ENV_DEV
+mmcpart=1
+mmcroot=2
+netargs=
+ setenv bootargs console=${console} root=/dev/nfs ip=dhcp
+ nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=
+ echo Booting from net ...;
+ if test ${ip_dyn} = yes; then
+ setenv get_cmd dhcp;
+ else
+ setenv get_cmd tftp;
+ fi;
+ ${get_cmd} ${loadaddr} ${image};
+ run netargs;
+ if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
+ booti ${loadaddr} - ${fdt_addr_r};
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+nfsroot=/srv/nfs
+update_bootimg=
+ mmc dev ${mmcdev};
+ if dhcp ${loadaddr} ${update_filepath}/${update_filename}; then
+ setexpr fw_sz ${filesize} / 0x200;
+ mmc write ${loadaddr} ${update_offset} ${fw_sz};
+ fi;
+update_filename=flash.bin
+update_offset=0x42
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index 8d85859..faff064 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -17,8 +17,13 @@
#include <log.h>
#include <spl.h>
+#include "../common/imx8m_som_detection.h"
+
DECLARE_GLOBAL_DATA_PTR;
+#define EEPROM_ADDR 0x51
+#define EEPROM_ADDR_FALLBACK 0x59
+
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
switch (boot_dev_spl) {
@@ -39,6 +44,18 @@
static void spl_dram_init(void)
{
+ int ret;
+
+ ret = phytec_eeprom_data_setup_fallback(NULL, 0, EEPROM_ADDR,
+ EEPROM_ADDR_FALLBACK);
+ if (ret)
+ goto out;
+
+ ret = phytec_imx8m_detect(NULL);
+ if (!ret)
+ phytec_print_som_info(NULL);
+
+out:
ddr_init(&dram_timing);
}
diff --git a/board/phytec/phycore_imx93/Kconfig b/board/phytec/phycore_imx93/Kconfig
index a70104c..09f26e8 100644
--- a/board/phytec/phycore_imx93/Kconfig
+++ b/board/phytec/phycore_imx93/Kconfig
@@ -10,4 +10,32 @@
config SYS_CONFIG_NAME
default "phycore_imx93"
+config PHYCORE_IMX93_RAM_TYPE_FIX
+ bool "Set phyCORE-i.MX93 RAM type and size fix instead of detecting"
+ default false
+ help
+ RAM type and size is being automatically detected with the help
+ of the PHYTEC EEPROM introspection data.
+ Set RAM type to a fix value instead.
+
+choice
+ prompt "phyCORE-i.MX93 RAM type"
+ depends on PHYCORE_IMX93_RAM_TYPE_FIX
+ default PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB
+
+config PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB
+ bool "LPDDR4X 1GB RAM"
+ help
+ Set RAM type fixed to LPDDR4X and RAM size fixed to 1GB
+ for phyCORE-i.MX93.
+
+config PHYCORE_IMX93_RAM_TYPE_LPDDR4X_2GB
+ bool "LPDDR4X 2GB RAM"
+ help
+ Set RAM type fixed to LPDDR4X and RAM size fixed to 2GB
+ for phyCORE-i.MX93.
+
+endchoice
+
+source "board/phytec/common/Kconfig"
endif
diff --git a/board/phytec/phycore_imx93/MAINTAINERS b/board/phytec/phycore_imx93/MAINTAINERS
index 9e91a29..718f89a 100644
--- a/board/phytec/phycore_imx93/MAINTAINERS
+++ b/board/phytec/phycore_imx93/MAINTAINERS
@@ -1,10 +1,13 @@
phyCORE-i.MX93
-M: Mathieu Othacehe <m.othacehe@gmail.com>
+M: Mathieu Othacehe <m.othacehe@gmail.com>
+R: Christoph Stoidner <c.stoidner@phytec.de>
W: https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
S: Maintained
F: arch/arm/dts/imx93-phyboard-segin.dts
F: arch/arm/dts/imx93-phycore-som.dtsi
F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
F: board/phytec/phycore_imx93/
-F: configs/imx93-phyboard-segin_defconfig
+F: board/phytec/common/imx93_som_detection.c
+F: board/phytec/common/imx93_som_detection.h
+F: configs/imx93-phycore_defconfig
F: include/configs/phycore_imx93.h
diff --git a/board/phytec/phycore_imx93/lpddr4_timing.c b/board/phytec/phycore_imx93/lpddr4_timing.c
index 2111972..f1261f6 100644
--- a/board/phytec/phycore_imx93/lpddr4_timing.c
+++ b/board/phytec/phycore_imx93/lpddr4_timing.c
@@ -1,24 +1,24 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2023 NXP
- * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Copyright 2024 NXP
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
* Christoph Stoidner <c.stoidner@phytec.de>
*
- * Code generated with DDR Tool v1.0.0.
+ * Code generated with DDR Tool v3.1.0_7.4.
*/
#include <linux/kernel.h>
#include <asm/arch/ddr.h>
+/* Initialize DDRC registers */
static struct dram_cfg_param ddr_ddrc_cfg[] = {
- /** Initialize DDRC registers **/
{0x4e300110, 0x44100001},
{0x4e300000, 0x8000bf},
{0x4e300008, 0x0},
{0x4e300080, 0x80000412},
{0x4e300084, 0x0},
{0x4e300114, 0x1002},
- {0x4e300260, 0x4080},
+ {0x4e300260, 0x80},
{0x4e300f04, 0x80},
{0x4e300800, 0x43b30002},
{0x4e300804, 0x1f1f1f1f},
@@ -31,18 +31,17 @@
{0x4e301254, 0x0},
{0x4e301258, 0x0},
{0x4e30125c, 0x0},
-
};
/* dram fsp cfg */
static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
{
{
- {0x4e300100, 0x24A0421B},
+ {0x4e300100, 0x24A0321B},
{0x4e300104, 0xF8EE001B},
- {0x4e300108, 0x2F263233},
- {0x4e30010C, 0x0005E18B},
- {0x4e300124, 0x1C770000},
+ {0x4e300108, 0x2F2E3233},
+ {0x4e30010C, 0x0005C18B},
+ {0x4e300124, 0x1C790000},
{0x4e300160, 0x00009102},
{0x4e30016C, 0x35F00000},
{0x4e300170, 0x8B0B0608},
@@ -50,21 +49,73 @@
{0x4e300254, 0x00FE00FE},
{0x4e300258, 0x00000008},
{0x4e30025C, 0x00000400},
- {0x4e300300, 0x224F2215},
+ {0x4e300300, 0x224F2213},
{0x4e300304, 0x00FE2213},
- {0x4e300308, 0x0A3C0E3C},
+ {0x4e300308, 0x0A380E3D},
},
{
{0x01, 0xE4},
{0x02, 0x36},
- {0x03, 0xF2},
- {0x0b, 0x46},
- {0x0c, 0x11},
- {0x0e, 0x11},
+ {0x03, 0x22},
+ {0x0b, 0x44},
+ {0x0c, 0x1E},
+ {0x0e, 0x12},
+ {0x16, 0x04},
+ },
+ 0,
+ },
+ {
+ {
+ {0x4e300100, 0x124F2100},
+ {0x4e300104, 0xF877000E},
+ {0x4e300108, 0x1816E4AA},
+ {0x4e30010C, 0x005101E6},
+ {0x4e300124, 0x0E3C0000},
+ {0x4e300160, 0x00009101},
+ {0x4e30016C, 0x30900000},
+ {0x4e300170, 0x8A0A0508},
+ {0x4e300250, 0x00000014},
+ {0x4e300254, 0x007B007B},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0xB4},
+ {0x02, 0x1B},
+ {0x03, 0x22},
+ {0x0b, 0x44},
+ {0x0c, 0x1E},
+ {0x0e, 0x12},
{0x16, 0x04},
},
0,
},
+ {
+ {
+ {0x4e300100, 0x00051000},
+ {0x4e300104, 0xF855000A},
+ {0x4e300108, 0x6E620A48},
+ {0x4e30010C, 0x0031010D},
+ {0x4e300124, 0x04C50000},
+ {0x4e300160, 0x00009100},
+ {0x4e30016C, 0x30000000},
+ {0x4e300170, 0x89090408},
+ {0x4e300250, 0x00000007},
+ {0x4e300254, 0x00240024},
+ {0x4e300258, 0x00000008},
+ {0x4e30025C, 0x00000400},
+ },
+ {
+ {0x01, 0x94},
+ {0x02, 0x9},
+ {0x03, 0x22},
+ {0x0b, 0x44},
+ {0x0c, 0x1E},
+ {0x0e, 0x12},
+ {0x16, 0x04},
+ },
+ 1,
+ },
};
@@ -90,25 +141,65 @@
{0x1015f, 0x5ff},
{0x1105f, 0x5ff},
{0x1115f, 0x5ff},
+ {0x11005f, 0x5ff},
+ {0x11015f, 0x5ff},
+ {0x11105f, 0x5ff},
+ {0x11115f, 0x5ff},
+ {0x21005f, 0x5ff},
+ {0x21015f, 0x5ff},
+ {0x21105f, 0x5ff},
+ {0x21115f, 0x5ff},
{0x55, 0x1ff},
{0x1055, 0x1ff},
{0x2055, 0x1ff},
{0x200c5, 0x19},
+ {0x1200c5, 0xb},
+ {0x2200c5, 0x7},
{0x2002e, 0x2},
+ {0x12002e, 0x2},
+ {0x22002e, 0x2},
{0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
{0x20024, 0x1e3},
{0x2003a, 0x2},
{0x2007d, 0x212},
{0x2007c, 0x61},
+ {0x120024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x12007d, 0x212},
+ {0x12007c, 0x61},
+ {0x220024, 0x1e3},
+ {0x2003a, 0x2},
+ {0x22007d, 0x212},
+ {0x22007c, 0x61},
{0x20056, 0x3},
+ {0x120056, 0x3},
+ {0x220056, 0x3},
{0x1004d, 0x600},
{0x1014d, 0x600},
{0x1104d, 0x600},
{0x1114d, 0x600},
- {0x10049, 0xe00},
- {0x10149, 0xe00},
- {0x11049, 0xe00},
- {0x11149, 0xe00},
+ {0x11004d, 0x600},
+ {0x11014d, 0x600},
+ {0x11104d, 0x600},
+ {0x11114d, 0x600},
+ {0x21004d, 0x600},
+ {0x21014d, 0x600},
+ {0x21104d, 0x600},
+ {0x21114d, 0x600},
+ {0x10049, 0x604},
+ {0x10149, 0x604},
+ {0x11049, 0x604},
+ {0x11149, 0x604},
+ {0x110049, 0x604},
+ {0x110149, 0x604},
+ {0x111049, 0x604},
+ {0x111149, 0x604},
+ {0x210049, 0x604},
+ {0x210149, 0x604},
+ {0x211049, 0x604},
+ {0x211149, 0x604},
{0x43, 0x60},
{0x1043, 0x60},
{0x2043, 0x60},
@@ -117,14 +208,30 @@
{0x20050, 0x0},
{0x2009b, 0x2},
{0x20008, 0x3a5},
+ {0x120008, 0x1d3},
+ {0x220008, 0x9c},
{0x20088, 0x9},
- {0x200b2, 0x10c},
+ {0x200b2, 0x104},
{0x10043, 0x5a1},
{0x10143, 0x5a1},
{0x11043, 0x5a1},
{0x11143, 0x5a1},
+ {0x1200b2, 0x104},
+ {0x110043, 0x5a1},
+ {0x110143, 0x5a1},
+ {0x111043, 0x5a1},
+ {0x111143, 0x5a1},
+ {0x2200b2, 0x104},
+ {0x210043, 0x5a1},
+ {0x210143, 0x5a1},
+ {0x211043, 0x5a1},
+ {0x211143, 0x5a1},
{0x200fa, 0x2},
+ {0x1200fa, 0x2},
+ {0x2200fa, 0x2},
{0x20019, 0x1},
+ {0x120019, 0x1},
+ {0x220019, 0x1},
{0x200f0, 0x600},
{0x200f1, 0x0},
{0x200f2, 0x4444},
@@ -133,42 +240,83 @@
{0x200f5, 0x0},
{0x200f6, 0x0},
{0x200f7, 0xf000},
+ {0x1004a, 0x500},
+ {0x1104a, 0x500},
{0x20025, 0x0},
- {0x2002d, 0x1},
+ {0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
{0x2002c, 0x0},
{0x20021, 0x0},
{0x200c7, 0x21},
{0x1200c7, 0x21},
{0x200ca, 0x24},
{0x1200ca, 0x24},
-
};
-/* ddr phy trained csr */
+/* PHY trained csr */
static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
{0x1005f, 0x0},
{0x1015f, 0x0},
{0x1105f, 0x0},
{0x1115f, 0x0},
+ {0x11005f, 0x0},
+ {0x11015f, 0x0},
+ {0x11105f, 0x0},
+ {0x11115f, 0x0},
+ {0x21005f, 0x0},
+ {0x21015f, 0x0},
+ {0x21105f, 0x0},
+ {0x21115f, 0x0},
{0x55, 0x0},
{0x1055, 0x0},
{0x2055, 0x0},
{0x200c5, 0x0},
+ {0x1200c5, 0x0},
+ {0x2200c5, 0x0},
{0x2002e, 0x0},
+ {0x12002e, 0x0},
+ {0x22002e, 0x0},
{0x90204, 0x0},
+ {0x190204, 0x0},
+ {0x290204, 0x0},
{0x20024, 0x0},
{0x2003a, 0x0},
{0x2007d, 0x0},
{0x2007c, 0x0},
+ {0x120024, 0x0},
+ {0x12007d, 0x0},
+ {0x12007c, 0x0},
+ {0x220024, 0x0},
+ {0x22007d, 0x0},
+ {0x22007c, 0x0},
{0x20056, 0x0},
+ {0x120056, 0x0},
+ {0x220056, 0x0},
{0x1004d, 0x0},
{0x1014d, 0x0},
{0x1104d, 0x0},
{0x1114d, 0x0},
+ {0x11004d, 0x0},
+ {0x11014d, 0x0},
+ {0x11104d, 0x0},
+ {0x11114d, 0x0},
+ {0x21004d, 0x0},
+ {0x21014d, 0x0},
+ {0x21104d, 0x0},
+ {0x21114d, 0x0},
{0x10049, 0x0},
{0x10149, 0x0},
{0x11049, 0x0},
{0x11149, 0x0},
+ {0x110049, 0x0},
+ {0x110149, 0x0},
+ {0x111049, 0x0},
+ {0x111149, 0x0},
+ {0x210049, 0x0},
+ {0x210149, 0x0},
+ {0x211049, 0x0},
+ {0x211149, 0x0},
{0x43, 0x0},
{0x1043, 0x0},
{0x2043, 0x0},
@@ -177,14 +325,30 @@
{0x20050, 0x0},
{0x2009b, 0x0},
{0x20008, 0x0},
+ {0x120008, 0x0},
+ {0x220008, 0x0},
{0x20088, 0x0},
{0x200b2, 0x0},
{0x10043, 0x0},
{0x10143, 0x0},
{0x11043, 0x0},
{0x11143, 0x0},
+ {0x1200b2, 0x0},
+ {0x110043, 0x0},
+ {0x110143, 0x0},
+ {0x111043, 0x0},
+ {0x111143, 0x0},
+ {0x2200b2, 0x0},
+ {0x210043, 0x0},
+ {0x210143, 0x0},
+ {0x211043, 0x0},
+ {0x211143, 0x0},
{0x200fa, 0x0},
+ {0x1200fa, 0x0},
+ {0x2200fa, 0x0},
{0x20019, 0x0},
+ {0x120019, 0x0},
+ {0x220019, 0x0},
{0x200f0, 0x0},
{0x200f1, 0x0},
{0x200f2, 0x0},
@@ -193,8 +357,12 @@
{0x200f5, 0x0},
{0x200f6, 0x0},
{0x200f7, 0x0},
+ {0x1004a, 0x0},
+ {0x1104a, 0x0},
{0x20025, 0x0},
{0x2002d, 0x0},
+ {0x12002d, 0x0},
+ {0x22002d, 0x0},
{0x2002c, 0x0},
{0xd0000, 0x0},
{0x90000, 0x0},
@@ -682,6 +850,14 @@
{0x2000c, 0x0},
{0x2000d, 0x0},
{0x2000e, 0x0},
+ {0x12000b, 0x0},
+ {0x12000c, 0x0},
+ {0x12000d, 0x0},
+ {0x12000e, 0x0},
+ {0x22000b, 0x0},
+ {0x22000c, 0x0},
+ {0x22000d, 0x0},
+ {0x22000e, 0x0},
{0x9000c, 0x0},
{0x9000d, 0x0},
{0x9000e, 0x0},
@@ -692,12 +868,26 @@
{0x90013, 0x0},
{0x20010, 0x0},
{0x20011, 0x0},
+ {0x120010, 0x0},
+ {0x120011, 0x0},
{0x40080, 0x0},
{0x40081, 0x0},
{0x40082, 0x0},
{0x40083, 0x0},
{0x40084, 0x0},
{0x40085, 0x0},
+ {0x140080, 0x0},
+ {0x140081, 0x0},
+ {0x140082, 0x0},
+ {0x140083, 0x0},
+ {0x140084, 0x0},
+ {0x140085, 0x0},
+ {0x240080, 0x0},
+ {0x240081, 0x0},
+ {0x240082, 0x0},
+ {0x240083, 0x0},
+ {0x240084, 0x0},
+ {0x240085, 0x0},
{0x400fd, 0x0},
{0x400f1, 0x0},
{0x10011, 0x0},
@@ -866,6 +1056,160 @@
{0x90207, 0x0},
{0x90208, 0x0},
{0x20020, 0x0},
+ {0x100080, 0x0},
+ {0x101080, 0x0},
+ {0x102080, 0x0},
+ {0x110020, 0x0},
+ {0x110080, 0x0},
+ {0x110081, 0x0},
+ {0x1100d0, 0x0},
+ {0x1100d1, 0x0},
+ {0x11008c, 0x0},
+ {0x11008d, 0x0},
+ {0x110180, 0x0},
+ {0x110181, 0x0},
+ {0x1101d0, 0x0},
+ {0x1101d1, 0x0},
+ {0x11018c, 0x0},
+ {0x11018d, 0x0},
+ {0x1100c0, 0x0},
+ {0x1100c1, 0x0},
+ {0x1101c0, 0x0},
+ {0x1101c1, 0x0},
+ {0x1102c0, 0x0},
+ {0x1102c1, 0x0},
+ {0x1103c0, 0x0},
+ {0x1103c1, 0x0},
+ {0x1104c0, 0x0},
+ {0x1104c1, 0x0},
+ {0x1105c0, 0x0},
+ {0x1105c1, 0x0},
+ {0x1106c0, 0x0},
+ {0x1106c1, 0x0},
+ {0x1107c0, 0x0},
+ {0x1107c1, 0x0},
+ {0x1108c0, 0x0},
+ {0x1108c1, 0x0},
+ {0x1100ae, 0x0},
+ {0x1100af, 0x0},
+ {0x111020, 0x0},
+ {0x111080, 0x0},
+ {0x111081, 0x0},
+ {0x1110d0, 0x0},
+ {0x1110d1, 0x0},
+ {0x11108c, 0x0},
+ {0x11108d, 0x0},
+ {0x111180, 0x0},
+ {0x111181, 0x0},
+ {0x1111d0, 0x0},
+ {0x1111d1, 0x0},
+ {0x11118c, 0x0},
+ {0x11118d, 0x0},
+ {0x1110c0, 0x0},
+ {0x1110c1, 0x0},
+ {0x1111c0, 0x0},
+ {0x1111c1, 0x0},
+ {0x1112c0, 0x0},
+ {0x1112c1, 0x0},
+ {0x1113c0, 0x0},
+ {0x1113c1, 0x0},
+ {0x1114c0, 0x0},
+ {0x1114c1, 0x0},
+ {0x1115c0, 0x0},
+ {0x1115c1, 0x0},
+ {0x1116c0, 0x0},
+ {0x1116c1, 0x0},
+ {0x1117c0, 0x0},
+ {0x1117c1, 0x0},
+ {0x1118c0, 0x0},
+ {0x1118c1, 0x0},
+ {0x1110ae, 0x0},
+ {0x1110af, 0x0},
+ {0x190201, 0x0},
+ {0x190202, 0x0},
+ {0x190203, 0x0},
+ {0x190205, 0x0},
+ {0x190206, 0x0},
+ {0x190207, 0x0},
+ {0x190208, 0x0},
+ {0x120020, 0x0},
+ {0x200080, 0x0},
+ {0x201080, 0x0},
+ {0x202080, 0x0},
+ {0x210020, 0x0},
+ {0x210080, 0x0},
+ {0x210081, 0x0},
+ {0x2100d0, 0x0},
+ {0x2100d1, 0x0},
+ {0x21008c, 0x0},
+ {0x21008d, 0x0},
+ {0x210180, 0x0},
+ {0x210181, 0x0},
+ {0x2101d0, 0x0},
+ {0x2101d1, 0x0},
+ {0x21018c, 0x0},
+ {0x21018d, 0x0},
+ {0x2100c0, 0x0},
+ {0x2100c1, 0x0},
+ {0x2101c0, 0x0},
+ {0x2101c1, 0x0},
+ {0x2102c0, 0x0},
+ {0x2102c1, 0x0},
+ {0x2103c0, 0x0},
+ {0x2103c1, 0x0},
+ {0x2104c0, 0x0},
+ {0x2104c1, 0x0},
+ {0x2105c0, 0x0},
+ {0x2105c1, 0x0},
+ {0x2106c0, 0x0},
+ {0x2106c1, 0x0},
+ {0x2107c0, 0x0},
+ {0x2107c1, 0x0},
+ {0x2108c0, 0x0},
+ {0x2108c1, 0x0},
+ {0x2100ae, 0x0},
+ {0x2100af, 0x0},
+ {0x211020, 0x0},
+ {0x211080, 0x0},
+ {0x211081, 0x0},
+ {0x2110d0, 0x0},
+ {0x2110d1, 0x0},
+ {0x21108c, 0x0},
+ {0x21108d, 0x0},
+ {0x211180, 0x0},
+ {0x211181, 0x0},
+ {0x2111d0, 0x0},
+ {0x2111d1, 0x0},
+ {0x21118c, 0x0},
+ {0x21118d, 0x0},
+ {0x2110c0, 0x0},
+ {0x2110c1, 0x0},
+ {0x2111c0, 0x0},
+ {0x2111c1, 0x0},
+ {0x2112c0, 0x0},
+ {0x2112c1, 0x0},
+ {0x2113c0, 0x0},
+ {0x2113c1, 0x0},
+ {0x2114c0, 0x0},
+ {0x2114c1, 0x0},
+ {0x2115c0, 0x0},
+ {0x2115c1, 0x0},
+ {0x2116c0, 0x0},
+ {0x2116c1, 0x0},
+ {0x2117c0, 0x0},
+ {0x2117c1, 0x0},
+ {0x2118c0, 0x0},
+ {0x2118c1, 0x0},
+ {0x2110ae, 0x0},
+ {0x2110af, 0x0},
+ {0x290201, 0x0},
+ {0x290202, 0x0},
+ {0x290203, 0x0},
+ {0x290205, 0x0},
+ {0x290206, 0x0},
+ {0x290207, 0x0},
+ {0x290208, 0x0},
+ {0x220020, 0x0},
{0x20077, 0x0},
{0x20072, 0x0},
{0x20073, 0x0},
@@ -888,7 +1232,6 @@
{0x11640, 0x0},
{0x11740, 0x0},
{0x11840, 0x0},
-
};
/* P0 message block parameter for training firmware */
@@ -896,7 +1239,7 @@
{0xd0000, 0x0},
{0x54003, 0xe94},
{0x54004, 0x4},
- {0x54006, 0x15},
+ {0x54006, 0x14},
{0x54008, 0x131f},
{0x54009, 0xc8},
{0x5400b, 0x4},
@@ -904,36 +1247,112 @@
{0x5400f, 0x100},
{0x54012, 0x110},
{0x54019, 0x36e4},
- {0x5401a, 0xf2},
- {0x5401b, 0x1146},
- {0x5401c, 0x1108},
+ {0x5401a, 0x22},
+ {0x5401b, 0x1e44},
+ {0x5401c, 0x1208},
{0x5401e, 0x4},
{0x5401f, 0x36e4},
- {0x54020, 0xf2},
- {0x54021, 0x1146},
- {0x54022, 0x1108},
+ {0x54020, 0x22},
+ {0x54021, 0x1e44},
+ {0x54022, 0x1208},
{0x54024, 0x4},
{0x54032, 0xe400},
- {0x54033, 0xf236},
- {0x54034, 0x4600},
- {0x54035, 0x811},
- {0x54036, 0x11},
+ {0x54033, 0x2236},
+ {0x54034, 0x4400},
+ {0x54035, 0x81e},
+ {0x54036, 0x12},
{0x54037, 0x400},
{0x54038, 0xe400},
- {0x54039, 0xf236},
- {0x5403a, 0x4600},
- {0x5403b, 0x811},
- {0x5403c, 0x11},
+ {0x54039, 0x2236},
+ {0x5403a, 0x4400},
+ {0x5403b, 0x81e},
+ {0x5403c, 0x12},
{0x5403d, 0x400},
{0xd0000, 0x1}
};
+/* P1 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp1_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x1},
+ {0x54003, 0x74a},
+ {0x54004, 0x4},
+ {0x54006, 0x14},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x1bb4},
+ {0x5401a, 0x22},
+ {0x5401b, 0x1e44},
+ {0x5401c, 0x1208},
+ {0x5401e, 0x4},
+ {0x5401f, 0x1bb4},
+ {0x54020, 0x22},
+ {0x54021, 0x1e44},
+ {0x54022, 0x1208},
+ {0x54024, 0x4},
+ {0x54032, 0xb400},
+ {0x54033, 0x221b},
+ {0x54034, 0x4400},
+ {0x54035, 0x81e},
+ {0x54036, 0x12},
+ {0x54037, 0x400},
+ {0x54038, 0xb400},
+ {0x54039, 0x221b},
+ {0x5403a, 0x4400},
+ {0x5403b, 0x81e},
+ {0x5403c, 0x12},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
+/* P2 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp2_cfg[] = {
+ {0xd0000, 0x0},
+ {0x54002, 0x102},
+ {0x54003, 0x270},
+ {0x54004, 0x4},
+ {0x54006, 0x14},
+ {0x54008, 0x121f},
+ {0x54009, 0xc8},
+ {0x5400b, 0x4},
+ {0x5400d, 0x100},
+ {0x5400f, 0x100},
+ {0x54012, 0x110},
+ {0x54019, 0x994},
+ {0x5401a, 0x22},
+ {0x5401b, 0x1e44},
+ {0x5401c, 0x1200},
+ {0x5401e, 0x4},
+ {0x5401f, 0x994},
+ {0x54020, 0x22},
+ {0x54021, 0x1e44},
+ {0x54022, 0x1200},
+ {0x54024, 0x4},
+ {0x54032, 0x9400},
+ {0x54033, 0x2209},
+ {0x54034, 0x4400},
+ {0x54035, 0x1e},
+ {0x54036, 0x12},
+ {0x54037, 0x400},
+ {0x54038, 0x9400},
+ {0x54039, 0x2209},
+ {0x5403a, 0x4400},
+ {0x5403b, 0x1e},
+ {0x5403c, 0x12},
+ {0x5403d, 0x400},
+ {0xd0000, 0x1}
+};
+
/* P0 2D message block parameter for training firmware */
static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
{0xd0000, 0x0},
{0x54003, 0xe94},
{0x54004, 0x4},
- {0x54006, 0x15},
+ {0x54006, 0x14},
{0x54008, 0x61},
{0x54009, 0xc8},
{0x5400b, 0x4},
@@ -942,26 +1361,26 @@
{0x54010, 0x2080},
{0x54012, 0x110},
{0x54019, 0x36e4},
- {0x5401a, 0xf2},
- {0x5401b, 0x1146},
- {0x5401c, 0x1108},
+ {0x5401a, 0x22},
+ {0x5401b, 0x1e44},
+ {0x5401c, 0x1208},
{0x5401e, 0x4},
{0x5401f, 0x36e4},
- {0x54020, 0xf2},
- {0x54021, 0x1146},
- {0x54022, 0x1108},
+ {0x54020, 0x22},
+ {0x54021, 0x1e44},
+ {0x54022, 0x1208},
{0x54024, 0x4},
{0x54032, 0xe400},
- {0x54033, 0xf236},
- {0x54034, 0x4600},
- {0x54035, 0x811},
- {0x54036, 0x11},
+ {0x54033, 0x2236},
+ {0x54034, 0x4400},
+ {0x54035, 0x81e},
+ {0x54036, 0x12},
{0x54037, 0x400},
{0x54038, 0xe400},
- {0x54039, 0xf236},
- {0x5403a, 0x4600},
- {0x5403b, 0x811},
- {0x5403c, 0x11},
+ {0x54039, 0x2236},
+ {0x5403a, 0x4400},
+ {0x5403b, 0x81e},
+ {0x5403c, 0x12},
{0x5403d, 0x400},
{0xd0000, 0x1}
};
@@ -1451,10 +1870,18 @@
{0x400d7, 0x20b},
{0x2003a, 0x2},
{0x200be, 0x3},
- {0x2000b, 0x75},
+ {0x2000b, 0x41a},
{0x2000c, 0xe9},
{0x2000d, 0x91c},
{0x2000e, 0x2c},
+ {0x12000b, 0x20d},
+ {0x12000c, 0x74},
+ {0x12000d, 0x48e},
+ {0x12000e, 0x2c},
+ {0x22000b, 0xb0},
+ {0x22000c, 0x27},
+ {0x22000d, 0x186},
+ {0x22000e, 0x10},
{0x9000c, 0x0},
{0x9000d, 0x173},
{0x9000e, 0x60},
@@ -1465,12 +1892,26 @@
{0x90013, 0x6152},
{0x20010, 0x5a},
{0x20011, 0x3},
+ {0x120010, 0x5a},
+ {0x120011, 0x3},
{0x40080, 0xe0},
{0x40081, 0x12},
{0x40082, 0xe0},
{0x40083, 0x12},
{0x40084, 0xe0},
{0x40085, 0x12},
+ {0x140080, 0xe0},
+ {0x140081, 0x12},
+ {0x140082, 0xe0},
+ {0x140083, 0x12},
+ {0x140084, 0xe0},
+ {0x140085, 0x12},
+ {0x240080, 0xe0},
+ {0x240081, 0x12},
+ {0x240082, 0xe0},
+ {0x240083, 0x12},
+ {0x240084, 0xe0},
+ {0x240085, 0x12},
{0x400fd, 0xf},
{0x400f1, 0xe},
{0x10011, 0x1},
@@ -1505,7 +1946,6 @@
{0x20088, 0x19},
{0xc0080, 0x0},
{0xd0000, 0x1},
-
};
static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
@@ -1515,9 +1955,21 @@
.fw_type = FW_1D_IMAGE,
.fsp_cfg = ddr_fsp0_cfg,
.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
-
},
-
+ {
+ /* P1 1866mts 1D */
+ .drate = 1866,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg),
+ },
+ {
+ /* P2 625mts 1D */
+ .drate = 625,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = ddr_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg),
+ },
{
/* P0 3733mts 2D */
.drate = 3733,
@@ -1525,7 +1977,6 @@
.fsp_cfg = ddr_fsp0_2d_cfg,
.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
},
-
};
/* ddr timing config params */
@@ -1540,7 +1991,227 @@
.ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
.ddrphy_pie = ddr_phy_pie,
.ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
- .fsp_table = { 3733, },
+ .fsp_table = { 3733, 1866, 625, },
.fsp_cfg = ddr_dram_fsp_cfg,
.fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
};
+
+void set_dram_timings_2gb_lpddr4x(void)
+{
+ /* Initialize DDRC registers */
+ dram_timing.ddrc_cfg[1].val = 0x8000ff;
+ dram_timing.ddrc_cfg[3].val = 0x80000512;
+
+ /* dram fsp cfg */
+ dram_timing.fsp_cfg[0].ddrc_cfg[0].val = 0x24AB321B;
+ dram_timing.fsp_cfg[0].ddrc_cfg[2].val = 0x2F2EE233;
+ dram_timing.fsp_cfg[0].ddrc_cfg[9].val = 0x015B015B;
+ dram_timing.fsp_cfg[0].ddrc_cfg[13].val = 0x015B2213;
+ dram_timing.fsp_cfg[0].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[0].mr_cfg[5].val = 0x13;
+
+ dram_timing.fsp_cfg[1].ddrc_cfg[0].val = 0x12552100;
+ dram_timing.fsp_cfg[1].ddrc_cfg[2].val = 0x1816B4AA;
+ dram_timing.fsp_cfg[1].ddrc_cfg[9].val = 0x00AA00AA;
+ dram_timing.fsp_cfg[1].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[1].mr_cfg[5].val = 0x13;
+
+ dram_timing.fsp_cfg[2].ddrc_cfg[0].val = 0x00061000;
+ dram_timing.fsp_cfg[2].ddrc_cfg[2].val = 0x6E62FA48;
+ dram_timing.fsp_cfg[2].ddrc_cfg[9].val = 0x00340034;
+ dram_timing.fsp_cfg[2].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[2].mr_cfg[5].val = 0x13;
+
+ /* P0 message block parameter for training firmware */
+ dram_timing.fsp_msg[0].fsp_cfg[12].val = 0x2044;
+ dram_timing.fsp_msg[0].fsp_cfg[13].val = 0x1308;
+ dram_timing.fsp_msg[0].fsp_cfg[17].val = 0x2044;
+ dram_timing.fsp_msg[0].fsp_cfg[18].val = 0x1308;
+ dram_timing.fsp_msg[0].fsp_cfg[23].val = 0x820;
+ dram_timing.fsp_msg[0].fsp_cfg[24].val = 0x13;
+ dram_timing.fsp_msg[0].fsp_cfg[29].val = 0x820;
+ dram_timing.fsp_msg[0].fsp_cfg[30].val = 0x13;
+
+ /* P1 message block parameter for training firmware */
+ dram_timing.fsp_msg[1].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[1].fsp_cfg[14].val = 0x1308;
+ dram_timing.fsp_msg[1].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[1].fsp_cfg[19].val = 0x1308;
+ dram_timing.fsp_msg[1].fsp_cfg[24].val = 0x820;
+ dram_timing.fsp_msg[1].fsp_cfg[25].val = 0x13;
+ dram_timing.fsp_msg[1].fsp_cfg[30].val = 0x820;
+ dram_timing.fsp_msg[1].fsp_cfg[31].val = 0x13;
+
+ /* P2 message block parameter for training firmware */
+ dram_timing.fsp_msg[2].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[2].fsp_cfg[14].val = 0x1300;
+ dram_timing.fsp_msg[2].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[2].fsp_cfg[19].val = 0x1300;
+ dram_timing.fsp_msg[2].fsp_cfg[24].val = 0x20;
+ dram_timing.fsp_msg[2].fsp_cfg[25].val = 0x13;
+ dram_timing.fsp_msg[2].fsp_cfg[30].val = 0x20;
+ dram_timing.fsp_msg[2].fsp_cfg[31].val = 0x13;
+
+ /* P0 2D message block parameter for training firmware */
+ dram_timing.fsp_msg[3].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[3].fsp_cfg[14].val = 0x1308;
+ dram_timing.fsp_msg[3].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[3].fsp_cfg[19].val = 0x1308;
+ dram_timing.fsp_msg[3].fsp_cfg[24].val = 0x820;
+ dram_timing.fsp_msg[3].fsp_cfg[25].val = 0x13;
+ dram_timing.fsp_msg[3].fsp_cfg[30].val = 0x820;
+ dram_timing.fsp_msg[3].fsp_cfg[31].val = 0x13;
+}
+
+/* Generated with DDR Tool v3.3.0_7.8-d1cdb7d3 */
+void set_dram_timings_1gb_lpddr4x_900mhz(void)
+{
+ /* Initialize DDRC registers */
+ dram_timing.ddrc_cfg[6].val = 0x4080;
+
+ /* dram fsp cfg */
+ dram_timing.fsp_cfg[0].ddrc_cfg[0].val = 0x124F2100;
+ dram_timing.fsp_cfg[0].ddrc_cfg[1].val = 0xF877000E;
+ dram_timing.fsp_cfg[0].ddrc_cfg[2].val = 0x181AE4AA;
+ dram_timing.fsp_cfg[0].ddrc_cfg[3].val = 0x005101E6;
+ dram_timing.fsp_cfg[0].ddrc_cfg[4].val = 0x0E3C0000;
+ dram_timing.fsp_cfg[0].ddrc_cfg[5].val = 0x00009101;
+ dram_timing.fsp_cfg[0].ddrc_cfg[6].val = 0x30900000;
+ dram_timing.fsp_cfg[0].ddrc_cfg[7].val = 0x8A0A0508;
+ dram_timing.fsp_cfg[0].ddrc_cfg[8].val = 0x00000014;
+ dram_timing.fsp_cfg[0].ddrc_cfg[9].val = 0x007B007B;
+ dram_timing.fsp_cfg[0].ddrc_cfg[12].val = 0x1128110B;
+ dram_timing.fsp_cfg[0].ddrc_cfg[13].val = 0x007B140A;
+ dram_timing.fsp_cfg[0].ddrc_cfg[14].val = 0x0620071E;
+ dram_timing.fsp_cfg[0].mr_cfg[0].val = 0xB4;
+ dram_timing.fsp_cfg[0].mr_cfg[1].val = 0x1B;
+ dram_timing.fsp_cfg[0].mr_cfg[2].val = 0xE2;
+ dram_timing.fsp_cfg[0].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[0].mr_cfg[5].val = 0x15;
+
+ dram_timing.fsp_cfg[1].ddrc_cfg[2].val = 0x181AE4AA;
+ dram_timing.fsp_cfg[1].mr_cfg[2].val = 0xE2;
+ dram_timing.fsp_cfg[1].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[1].mr_cfg[5].val = 0x15;
+
+ dram_timing.fsp_cfg[2].ddrc_cfg[2].val = 0x6E660A48;
+ dram_timing.fsp_cfg[2].mr_cfg[2].val = 0xE2;
+ dram_timing.fsp_cfg[2].mr_cfg[4].val = 0x20;
+ dram_timing.fsp_cfg[2].mr_cfg[5].val = 0x15;
+
+ /* PHY Initialize Configuration */
+ dram_timing.ddrphy_cfg[31].val = 0xb;
+ dram_timing.ddrphy_cfg[86].val = 0x1d3;
+ dram_timing.ddrphy_cfg[90].val = 0x10c;
+ dram_timing.ddrphy_cfg[95].val = 0x10c;
+ dram_timing.ddrphy_cfg[100].val = 0x10c;
+ dram_timing.ddrphy_cfg[122].val = 0x1;
+ /**
+ * NOTE:
+ * In the output from DDR Tool v3.3.0_7.8-d1cdb7d3, array members 119
+ * (reg=0x1004a, val=0x500) and 120 (reg=0x1104a, val=0x500) are not
+ * present in the ddr_ddrphy_cfg array. However they were present in array
+ * generated with previous DDR Tool v3.1.0_7.4. We simply set both values
+ * to default value of 0x400 (read with dwc_ddrphy_apb_rd()) here to avoid
+ * any negative side-effects.
+ */
+ dram_timing.ddrphy_cfg[119].val = 0x400;
+ dram_timing.ddrphy_cfg[120].val = 0x400;
+
+ /**
+ * NOTE:
+ * In the output from DDR Tool v3.3.0_7.8-d1cdb7d3, array members 101
+ * (reg=0x1004a, val=0x0) and 120 (reg=0x1104a, val=0x0) are not present
+ * in the ddr_ddrphy_trained_csr array. However they were present in array
+ * generated with previous DDR Tool v3.1.0_7.4. We simply set both values
+ * to default 0x0 (like all other ddrphy_trained_csr values) here to avoid
+ * any negative side-effects.
+ */
+ /* PHY trained csr */
+ dram_timing.ddrphy_trained_csr[101].val = 0x0;
+ dram_timing.ddrphy_trained_csr[102].val = 0x0;
+
+ /* P0 message block parameter for training firmware */
+ dram_timing.fsp_msg[0].fsp_cfg[1].val = 0x74a;
+ dram_timing.fsp_msg[0].fsp_cfg[3].val = 0x15;
+ dram_timing.fsp_msg[0].fsp_cfg[10].val = 0x1bb4;
+ dram_timing.fsp_msg[0].fsp_cfg[11].val = 0xe2;
+ dram_timing.fsp_msg[0].fsp_cfg[12].val = 0x2044;
+ dram_timing.fsp_msg[0].fsp_cfg[13].val = 0x1508;
+ dram_timing.fsp_msg[0].fsp_cfg[15].val = 0x1bb4;
+ dram_timing.fsp_msg[0].fsp_cfg[16].val = 0xe2;
+ dram_timing.fsp_msg[0].fsp_cfg[17].val = 0x2044;
+ dram_timing.fsp_msg[0].fsp_cfg[18].val = 0x1508;
+ dram_timing.fsp_msg[0].fsp_cfg[20].val = 0xb400;
+ dram_timing.fsp_msg[0].fsp_cfg[21].val = 0xe21b;
+ dram_timing.fsp_msg[0].fsp_cfg[23].val = 0x820;
+ dram_timing.fsp_msg[0].fsp_cfg[24].val = 0x15;
+ dram_timing.fsp_msg[0].fsp_cfg[26].val = 0xb400;
+ dram_timing.fsp_msg[0].fsp_cfg[27].val = 0xe21b;
+ dram_timing.fsp_msg[0].fsp_cfg[29].val = 0x820;
+ dram_timing.fsp_msg[0].fsp_cfg[30].val = 0x15;
+
+ /* P1 message block parameter for training firmware */
+ dram_timing.fsp_msg[1].fsp_cfg[4].val = 0x15;
+ dram_timing.fsp_msg[1].fsp_cfg[12].val = 0xe2;
+ dram_timing.fsp_msg[1].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[1].fsp_cfg[14].val = 0x1508;
+ dram_timing.fsp_msg[1].fsp_cfg[17].val = 0xe2;
+ dram_timing.fsp_msg[1].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[1].fsp_cfg[19].val = 0x1508;
+ dram_timing.fsp_msg[1].fsp_cfg[22].val = 0xe21b;
+ dram_timing.fsp_msg[1].fsp_cfg[24].val = 0x820;
+ dram_timing.fsp_msg[1].fsp_cfg[25].val = 0x15;
+ dram_timing.fsp_msg[1].fsp_cfg[28].val = 0xe21b;
+ dram_timing.fsp_msg[1].fsp_cfg[30].val = 0x820;
+ dram_timing.fsp_msg[1].fsp_cfg[31].val = 0x15;
+
+ /* P2 message block parameter for training firmware */
+ dram_timing.fsp_msg[2].fsp_cfg[4].val = 0x15;
+ dram_timing.fsp_msg[2].fsp_cfg[12].val = 0xe2;
+ dram_timing.fsp_msg[2].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[2].fsp_cfg[14].val = 0x1500;
+ dram_timing.fsp_msg[2].fsp_cfg[17].val = 0xe2;
+ dram_timing.fsp_msg[2].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[2].fsp_cfg[19].val = 0x1500;
+ dram_timing.fsp_msg[2].fsp_cfg[22].val = 0xe209;
+ dram_timing.fsp_msg[2].fsp_cfg[24].val = 0x20;
+ dram_timing.fsp_msg[2].fsp_cfg[25].val = 0x15;
+ dram_timing.fsp_msg[2].fsp_cfg[28].val = 0xe209;
+ dram_timing.fsp_msg[2].fsp_cfg[30].val = 0x20;
+ dram_timing.fsp_msg[2].fsp_cfg[31].val = 0x15;
+
+ /* P0 2D message block parameter for training firmware */
+ dram_timing.fsp_msg[3].fsp_cfg[1].val = 0x74a;
+ dram_timing.fsp_msg[3].fsp_cfg[3].val = 0x15;
+ dram_timing.fsp_msg[3].fsp_cfg[11].val = 0x1bb4;
+ dram_timing.fsp_msg[3].fsp_cfg[12].val = 0xe2;
+ dram_timing.fsp_msg[3].fsp_cfg[13].val = 0x2044;
+ dram_timing.fsp_msg[3].fsp_cfg[14].val = 0x1508;
+ dram_timing.fsp_msg[3].fsp_cfg[16].val = 0x1bb4;
+ dram_timing.fsp_msg[3].fsp_cfg[17].val = 0xe2;
+ dram_timing.fsp_msg[3].fsp_cfg[18].val = 0x2044;
+ dram_timing.fsp_msg[3].fsp_cfg[19].val = 0x1508;
+ dram_timing.fsp_msg[3].fsp_cfg[21].val = 0xb400;
+ dram_timing.fsp_msg[3].fsp_cfg[22].val = 0xe21b;
+ dram_timing.fsp_msg[3].fsp_cfg[24].val = 0x820;
+ dram_timing.fsp_msg[3].fsp_cfg[25].val = 0x15;
+ dram_timing.fsp_msg[3].fsp_cfg[27].val = 0xb400;
+ dram_timing.fsp_msg[3].fsp_cfg[28].val = 0xe21b;
+ dram_timing.fsp_msg[3].fsp_cfg[30].val = 0x820;
+ dram_timing.fsp_msg[3].fsp_cfg[31].val = 0x15;
+
+ /* DRAM PHY init engine image */
+ dram_timing.ddrphy_pie[483].val = 0x20d;
+ dram_timing.ddrphy_pie[484].val = 0x74;
+ dram_timing.ddrphy_pie[485].val = 0x48e;
+
+ /* P0 3733mts 1D */
+ dram_timing.fsp_msg[0].drate = 1866;
+
+ /* P0 1866mts 2D */
+ dram_timing.fsp_msg[3].drate = 1866;
+
+ /* ddr timing config params */
+ dram_timing.fsp_table[0] = 1866;
+}
diff --git a/board/phytec/phycore_imx93/phycore-imx93.c b/board/phytec/phycore_imx93/phycore-imx93.c
index 085c8e1..a55795e 100644
--- a/board/phytec/phycore_imx93/phycore-imx93.c
+++ b/board/phytec/phycore_imx93/phycore-imx93.c
@@ -3,6 +3,7 @@
* Copyright (C) 2023 PHYTEC Messtechnik GmbH
* Author: Christoph Stoidner <c.stoidner@phytec.de>
* Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
*/
#include <asm/arch-imx9/ccm_regs.h>
@@ -12,11 +13,21 @@
#include <asm/global_data.h>
#include <asm/mach-imx/boot_mode.h>
#include <env.h>
+#include <fdt_support.h>
+
+#include "../common/imx93_som_detection.h"
DECLARE_GLOBAL_DATA_PTR;
+#define EEPROM_ADDR 0x50
+
int board_init(void)
{
+ int ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR);
+
+ if (ret)
+ printf("%s: EEPROM data init failed\n", __func__);
+
return 0;
}
@@ -38,5 +49,45 @@
break;
}
+ return 0;
+}
+
+static void emmc_fixup(void *blob, struct phytec_eeprom_data *data)
+{
+ enum phytec_imx93_voltage voltage = phytec_imx93_get_voltage(data);
+ int offset;
+
+ if (voltage == PHYTEC_IMX93_VOLTAGE_INVALID)
+ goto err;
+
+ if (voltage == PHYTEC_IMX93_VOLTAGE_1V8) {
+ offset = fdt_node_offset_by_compat_reg(blob, "fsl,imx93-usdhc",
+ 0x42850000);
+ if (offset)
+ fdt_delprop(blob, offset, "no-1-8-v");
+ else
+ goto err;
+ }
+
+ return;
+err:
+ printf("Could not detect eMMC VDD-IO. Fall back to default.\n");
+}
+
+int board_fix_fdt(void *blob)
+{
+ struct phytec_eeprom_data data;
+
+ phytec_eeprom_data_setup(&data, 2, EEPROM_ADDR);
+
+ emmc_fixup(blob, &data);
+
+ return 0;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ emmc_fixup(blob, NULL);
+
return 0;
}
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
index 17a8736..a4d2aaa 100644
--- a/board/phytec/phycore_imx93/spl.c
+++ b/board/phytec/phycore_imx93/spl.c
@@ -3,6 +3,7 @@
* Copyright (C) 2023 PHYTEC Messtechnik GmbH
* Author: Christoph Stoidner <c.stoidner@phytec.de>
* Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
*/
#include <asm/arch/clock.h>
@@ -20,6 +21,8 @@
#include <power/pca9450.h>
#include <spl.h>
+#include "../common/imx93_som_detection.h"
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -27,6 +30,13 @@
* when pca9451a support is added.
*/
#define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5)
+#define EEPROM_ADDR 0x50
+
+/*
+ * Prototypes of automatically generated ram config file
+ */
+void set_dram_timings_2gb_lpddr4x(void);
+void set_dram_timings_1gb_lpddr4x_900mhz(void);
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
@@ -46,6 +56,44 @@
void spl_dram_init(void)
{
+ int ret;
+ enum phytec_imx93_ddr_eeprom_code ddr_opt = PHYTEC_IMX93_DDR_INVALID;
+
+ /* NOTE: In SPL lpi2c3 is mapped to bus 0 */
+ ret = phytec_eeprom_data_setup(NULL, 0, EEPROM_ADDR);
+ if (ret && !IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX))
+ goto out;
+
+ ret = phytec_imx93_detect(NULL);
+ if (!ret)
+ phytec_print_som_info(NULL);
+
+ if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX)) {
+ if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB))
+ ddr_opt = PHYTEC_IMX93_LPDDR4X_1GB;
+ else if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_LPDDR4X_2GB))
+ ddr_opt = PHYTEC_IMX93_LPDDR4X_2GB;
+ } else {
+ ddr_opt = phytec_imx93_get_opt(NULL, PHYTEC_IMX93_OPT_DDR);
+ }
+
+ switch (ddr_opt) {
+ case PHYTEC_IMX93_LPDDR4X_1GB:
+ if (is_voltage_mode(VOLT_LOW_DRIVE))
+ set_dram_timings_1gb_lpddr4x_900mhz();
+ break;
+ case PHYTEC_IMX93_LPDDR4X_2GB:
+ set_dram_timings_2gb_lpddr4x();
+ break;
+ default:
+ goto out;
+ }
+ ddr_init(&dram_timing);
+ return;
+out:
+ puts("Could not detect correct RAM type and size. Fall back to default.\n");
+ if (is_voltage_mode(VOLT_LOW_DRIVE))
+ set_dram_timings_1gb_lpddr4x_900mhz();
ddr_init(&dram_timing);
}
diff --git a/board/siemens/capricorn/Kconfig b/board/siemens/capricorn/Kconfig
index c5a28ff..fe23097 100644
--- a/board/siemens/capricorn/Kconfig
+++ b/board/siemens/capricorn/Kconfig
@@ -1,4 +1,5 @@
-if TARGET_GIEDI
+if TARGET_CAPRICORN
+
config SYS_BOARD
default "capricorn"
@@ -7,24 +8,18 @@
default "siemens"
config SYS_CONFIG_NAME
- default "giedi"
+ default "capricorn-common"
config IMX_CONFIG
default "board/siemens/capricorn/imximage.cfg"
-endif
-if TARGET_DENEB
-
-config SYS_BOARD
- default "capricorn"
-
-config SYS_VENDOR
- default "siemens"
+endif
-config SYS_CONFIG_NAME
- default "deneb"
-config IMX_CONFIG
- default "board/siemens/capricorn/imximage.cfg"
+config SPL_CMT
+ bool "Enable Siemens SPL RAM test"
+ depends on SPL
+ help
+ Enable SIemens SPL RAM test.
-endif
+source "board/siemens/common/Kconfig"
diff --git a/board/siemens/capricorn/MAINTAINERS b/board/siemens/capricorn/MAINTAINERS
index b4c5203..5f467aa 100644
--- a/board/siemens/capricorn/MAINTAINERS
+++ b/board/siemens/capricorn/MAINTAINERS
@@ -1,10 +1,12 @@
CAPRICORN BOARD
+M: Alexander Sverdlin <alexander.sverdlin@siemens.com>
M: Anatolij Gustschin <agust@denx.de>
+M: Heiko Schocher <hs@denx.de>
+M: Walter Schweizer <walter.schweizer@siemens.com>
S: Maintained
+F: arch/arm/dts/imx8-capricorn-cxg3.dts
+F: arch/arm/dts/imx8-capricorn-u-boot.dtsi
+F: arch/arm/dts/imx8-capricorn.dtsi
F: board/siemens/capricorn/
+F: configs/capricorn_cxg3_defconfig
F: include/configs/capricorn-common.h
-F: include/configs/deneb.h
-F: include/configs/giedi.h
-F: include/configs/siemens-env-common.h
-F: configs/deneb_defconfig
-F: configs/giedi_defconfig
diff --git a/board/siemens/capricorn/Makefile b/board/siemens/capricorn/Makefile
index e8a24c4..a03d54e 100644
--- a/board/siemens/capricorn/Makefile
+++ b/board/siemens/capricorn/Makefile
@@ -8,6 +8,8 @@
ifdef CONFIG_XPL_BUILD
obj-y += spl.o
+obj-$(CONFIG_SPL_CMT) += spl_memory_test.o
else
obj-y += ../common/factoryset.o
+obj-$(CONFIG_DDR_SI_TEST) += ../common/ddr_si_test.o
endif
diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c
index ad474d9..390a7b0 100644
--- a/board/siemens/capricorn/board.c
+++ b/board/siemens/capricorn/board.c
@@ -26,6 +26,7 @@
#include <asm/arch-imx8/clock.h>
#endif
#include <linux/delay.h>
+#include "../common/board.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
@@ -63,8 +64,7 @@
sc_pm_clock_rate_t rate = SC_80MHZ;
int ret;
- ret = sc_pm_setup_uart(SC_R_UART_0, rate);
- ret |= sc_pm_setup_uart(SC_R_UART_2, rate);
+ ret = sc_pm_setup_uart(SC_R_UART_2, rate);
if (ret)
return ret;
@@ -73,6 +73,40 @@
return 0;
}
+#ifndef CONFIG_XPL_BUILD
+void board_mem_get_layout(u64 *phys_sdram_1_start,
+ u64 *phys_sdram_1_size,
+ u64 *phys_sdram_2_start,
+ u64 *phys_sdram_2_size)
+{
+ sc_faddr_t addr_start, addr_end;
+ sc_faddr_t sdram_1_size, sdram_2_size;
+ sc_err_t sc_err;
+
+ sc_err = sc_rm_get_memreg_info(-1, 6, &addr_start, &addr_end);
+ if (sc_err == SC_ERR_NONE) {
+ if (addr_end < 0x100000000) {
+ /* only lower RAM available */
+ sdram_1_size = (addr_end + 1) - PHYS_SDRAM_1;
+ sdram_2_size = 0;
+ } else {
+ /* lower RAM (2 GB) und upper RAM available */
+ sdram_1_size = SZ_2G;
+ sdram_2_size = (addr_end + 1) - PHYS_SDRAM_2;
+ }
+ } else {
+ /* Get default in case it would fail */
+ sdram_1_size = PHYS_SDRAM_1_SIZE;
+ sdram_2_size = PHYS_SDRAM_2_SIZE;
+ }
+
+ *phys_sdram_1_start = PHYS_SDRAM_1;
+ *phys_sdram_1_size = sdram_1_size;
+ *phys_sdram_2_start = PHYS_SDRAM_2;
+ *phys_sdram_2_size = sdram_2_size;
+}
+#endif /* ! CONFIG_XPL_BUILD */
+
#define ENET_PHY_RESET IMX_GPIO_NR(0, 3)
#define ENET_TEST_1 IMX_GPIO_NR(0, 8)
#define ENET_TEST_2 IMX_GPIO_NR(0, 9)
@@ -271,11 +305,7 @@
{
puts("Board: Capricorn\n");
- /*
- * Running build_info() doesn't work with current SCFW blob.
- * Uncomment below call when new blob is available.
- */
- /*build_info();*/
+ build_info();
print_bootinfo();
return 0;
@@ -283,6 +313,32 @@
int board_init(void)
{
+ struct chip_data eeprom_data = {};
+ char module_name[16];
+ int ret;
+
+ ret = siemens_ee_setup();
+ if (ret) {
+ printf("'siemens_ee_setup' failed, ret: %d\n", ret);
+ goto skip;
+ }
+
+ /* Get module name from EEPROM */
+ siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, module_name,
+ sizeof(module_name));
+ printf("CPU module: %s\n", module_name);
+
+ ret = siemens_ee_read_data(SIEMENS_EE_ADDR_CHIP,
+ (uchar *)&eeprom_data,
+ sizeof(eeprom_data));
+ if (ret) {
+ printf("'siemens_ee_read_data' failed, ret: %d\n", ret);
+ goto skip;
+ }
+
+ printf("HW Version: %s\n", eeprom_data.shwver);
+skip:
+
setup_fec();
return 0;
}
diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg
index 4350e29..7fd3fb8 100644
--- a/board/siemens/capricorn/imximage.cfg
+++ b/board/siemens/capricorn/imximage.cfg
@@ -9,13 +9,24 @@
/* Boot from SD, sector size 0x400 */
BOOT_FROM sd
+
+/* skip DCD data, as firmware initializes the RAM */
+DCD_SKIP true
+
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
-/* Append seco container image */
-APPEND ahab-container.img
+/*
+ * Append seco container image,
+ * use same name as in arch/arm/dts/imx8qxp-u-boot.dtsi
+ */
+APPEND mx8qxc0-ahab-container.img
/* Create the 2nd container */
CONTAINER
-/* Add scfw image with exec attribute */
-IMAGE SCU capricorn-scfw-tcm.bin
-/* Add ATF image with exec attribute */
+/*
+ * Add scfw image with exec attribute
+ * use same name as in arch/arm/dts/imx8qxp-u-boot.dtsi
+ */
+IMAGE SCU mx8qx-mek-scfw-tcm.bin
+
+/* Add SPL image with exec attribute */
IMAGE A35 spl/u-boot-spl.bin 0x00100000
diff --git a/board/siemens/capricorn/spl.c b/board/siemens/capricorn/spl.c
index 696b5eb..5865cde 100644
--- a/board/siemens/capricorn/spl.c
+++ b/board/siemens/capricorn/spl.c
@@ -15,12 +15,31 @@
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
+#include <firmware/imx/sci/sci.h>
+#include <asm/arch/imx8-pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include "spl_memory_test.h"
+
DECLARE_GLOBAL_DATA_PTR;
+#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \
+ (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+ (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
+ (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+
+#define USDHC2_SD_PWR IMX_GPIO_NR(4, 19)
+static iomux_cfg_t usdhc2_sd_pwr[] = {
+ SC_P_USDHC1_RESET_B | MUX_PAD_CTRL(GPIO_PAD_CTRL),
+};
+
void spl_board_init(void)
{
struct udevice *dev;
+ uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(imx8_scu), &dev);
+
uclass_find_first_device(UCLASS_MISC, &dev);
for (; dev; uclass_find_next_device(&dev)) {
@@ -34,8 +53,32 @@
timer_init();
+ imx8_iomux_setup_multiple_pads(usdhc2_sd_pwr, ARRAY_SIZE(usdhc2_sd_pwr));
+ gpio_direction_output(USDHC2_SD_PWR, 0);
+
preloader_console_init();
+
+ puts("Normal Boot\n");
+
+#if IS_ENABLED(CONFIG_SPL_CMT)
+ spl_siemens_memory_full_test();
+#endif
+}
+
+void spl_board_prepare_for_boot(void)
+{
+ imx8_power_off_pd_devices(NULL, 0);
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
}
+#endif
void board_init_f(ulong dummy)
{
diff --git a/board/siemens/capricorn/spl_memory_test.c b/board/siemens/capricorn/spl_memory_test.c
new file mode 100644
index 0000000..84c97e7
--- /dev/null
+++ b/board/siemens/capricorn/spl_memory_test.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright Siemens AG 2020
+ *
+ * SPL Full Memory Test
+ * - memory test through the full DDR area
+ * - refresh over temperature torture (write all, read all)
+ *
+ * Remark:
+ * This test has ran properly with the definition of the RAM sizes in board
+ * headers. Since these headers are removed it's necessary to set the correct
+ * values to PHYS_SDRAM_1_SIZE & PHYS_SDRAM_2_SIZE before to recompile.
+ *
+ * An alternative is to refactor the code to get the size info from system
+ * controller
+ */
+
+#include <init.h>
+#include <log.h>
+
+/* ----- Defines ----- */
+#define CHECK_LOWER_UPPER
+
+#define LEVEL2_PRINT 0x0FFFFFFF
+
+/* use 0x7FFF0000 for shorter loop test */
+#define BASE_OFFSET 0x00000000
+
+/* ----- Types ----- */
+struct ct_t {
+ unsigned long *start;
+ unsigned long *end;
+};
+
+/* ----- Variables ----- */
+static struct ct_t ct;
+static unsigned long error_counter;
+
+static void print_parameters(void)
+{
+ printf("\nstart addr: %p\n", ct.start);
+ printf("end addr : %p\n", ct.end);
+}
+
+static void run_test(void)
+{
+ /* moved full test in one void */
+ unsigned long *address; /* 512 */
+ unsigned long ebyte1;
+ unsigned long ebyte2;
+ unsigned int i;
+ unsigned long rpattern;
+
+ for (i = 0; i <= 255; i++) {
+ memset(&ebyte1, i, sizeof(ebyte1));
+ ebyte2 = ~ebyte1;
+ printf("LWord: %016lx #LWord: %016lx\n", ebyte1, ebyte2);
+
+ /* write all bytes -> duration ~ 150 s */
+ for (address = ct.start; address <= ct.end; address++) {
+#ifdef LEVEL2_PRINT
+ if (((unsigned long)address & LEVEL2_PRINT) == 0)
+ printf("write to %p - %p\n", address,
+ (void *)((unsigned long)address +
+ LEVEL2_PRINT));
+#endif
+ *address = ebyte1;
+ address++;
+ *address = ebyte2;
+ }
+
+ /* check all bytes */
+ for (address = ct.start; address <= ct.end; address++) {
+#ifdef LEVEL2_PRINT
+ if (((unsigned long)address & LEVEL2_PRINT) == 0)
+ printf("check from %p - %p\n", address,
+ (void *)((unsigned long)address +
+ LEVEL2_PRINT));
+#endif
+
+ rpattern = *address;
+ if (rpattern != ebyte1) {
+ error_counter++;
+ printf("Error! Read: %016lX Wrote: %016lX Address: %p\n",
+ rpattern, ebyte1, address);
+ }
+
+ address++;
+ rpattern = *address;
+ if (rpattern != ebyte2) {
+ error_counter++;
+ printf("Error! Read: %016lX Wrote: %016lX Address: %p\n",
+ rpattern, ebyte2, address);
+ }
+ }
+ }
+}
+
+#ifdef CHECK_LOWER_UPPER
+void test_lower_upper(void)
+{
+ /*
+ * write different values at the same address of both memory areas
+ * and check them
+ */
+#define TEST_ADDRESS 0x12345670UL
+#define LOWER_ADDRESS (PHYS_SDRAM_1 + TEST_ADDRESS)
+#define UPPER_ADDRESS (PHYS_SDRAM_2 + TEST_ADDRESS)
+#define LOWER_VALUE 0x0011223344556677
+#define UPPER_VALUE 0x89ab89abffeeddcc
+
+ *(unsigned long *)LOWER_ADDRESS = LOWER_VALUE;
+ *(unsigned long *)UPPER_ADDRESS = UPPER_VALUE;
+
+ puts("\nlower-upper memory area test\n");
+ printf("write %016lx to lower address %010lx\n", LOWER_VALUE,
+ LOWER_ADDRESS);
+ printf("write %016lx to upper address %010lx\n", UPPER_VALUE,
+ UPPER_ADDRESS);
+ printf("read %016lx from lower address %010lx\n",
+ *(unsigned long *)LOWER_ADDRESS, LOWER_ADDRESS);
+ printf("read %016lx from upper address %010lx\n",
+ *(unsigned long *)UPPER_ADDRESS, UPPER_ADDRESS);
+}
+#endif
+
+void spl_siemens_memory_full_test(void)
+{
+ unsigned long loopc = 0;
+
+ puts("\nSPL: memory cell test\n");
+
+#ifdef CHECK_LOWER_UPPER
+ if (PHYS_SDRAM_2_SIZE != 0)
+ test_lower_upper();
+#endif
+
+ while (true) {
+ /* imx8x has 2 memory areas up to 2 GB */
+
+ /* 1st memory area @ 0x80000000 */
+ ct.start = (unsigned long *)(PHYS_SDRAM_1 + BASE_OFFSET);
+ ct.end = (unsigned long *)(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - 1);
+ print_parameters();
+ run_test();
+
+ /* 2nd memory area @ 0x880000000 */
+ if (PHYS_SDRAM_2_SIZE != 0) {
+ ct.start = (unsigned long *)(PHYS_SDRAM_2 + BASE_OFFSET);
+ ct.end = (unsigned long *)(PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE - 1);
+ print_parameters();
+ run_test();
+ }
+
+ loopc++;
+ printf("loop: %ld, errors: %ld\n\n", loopc, error_counter);
+ };
+}
diff --git a/board/siemens/capricorn/spl_memory_test.h b/board/siemens/capricorn/spl_memory_test.h
new file mode 100644
index 0000000..28df284
--- /dev/null
+++ b/board/siemens/capricorn/spl_memory_test.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright Siemens AG 2020
+ *
+ */
+
+void spl_siemens_memory_full_test(void);
diff --git a/board/siemens/common/Kconfig b/board/siemens/common/Kconfig
index 131439f..4ae12b1 100644
--- a/board/siemens/common/Kconfig
+++ b/board/siemens/common/Kconfig
@@ -1,2 +1,6 @@
config FACTORYSET
bool
+
+config DDR_SI_TEST
+ bool "DDR signal integrity test implementations"
+ default y
diff --git a/board/siemens/common/board.h b/board/siemens/common/board.h
new file mode 100644
index 0000000..db34bc7
--- /dev/null
+++ b/board/siemens/common/board.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Common board functions for siemens based boards
+ * (C) Copyright 2022 Siemens Schweiz AG
+ */
+
+#ifndef __COMMON_BOARD_H
+#define __COMMON_BOARD_H
+
+/*
+ * Chip data
+ * Offset in EEPROM: 0x120 - 0x14F
+ *
+ * -----------------------------------------------------------------------------------
+ * | Address range | Content |
+ * -----------------------------------------------------------------------------------
+ * | 0x120 - 0x123 | Magic Number - 0x43484950 (4 byte) |
+ * -----------------------------------------------------------------------------------
+ * | 0x124 - 0x133 | Device Nomenclature (15 + 1 byte) |
+ * -----------------------------------------------------------------------------------
+ * | 0x134 - 0x13A | HW Version of the form "v00.00" (6 + 1 byte) |
+ * | | - First 2 digits: Layout revision (starting from 1) |
+ * | | - Last 2 digits: Assembly variant revision (starting from 1) |
+ * -----------------------------------------------------------------------------------
+ * | 0x13B - 0x13F | Flash Size in Gibit (4 + 1 byte) |
+ * -----------------------------------------------------------------------------------
+ * | 0x140 - 0x144 | Ram Size in Gibit (4 + 1 byte) |
+ * -----------------------------------------------------------------------------------
+ * | 0x145 - 0x14F | Sequence number, equals DMC-code (10 + 1 byte) [OBSOLETE] |
+ * -----------------------------------------------------------------------------------
+ */
+
+#define MAGIC_CHIP 0x50494843
+#define EEPROM_CHIP_OFFSET 0x120
+
+struct chip_data {
+ unsigned int magic;
+ char sdevname[16];
+ char shwver[7];
+ char flash_size[5];
+ char ram_size[5];
+};
+
+#endif /* __COMMON_BOARD_H */
diff --git a/board/siemens/common/ddr_si_test.c b/board/siemens/common/ddr_si_test.c
new file mode 100644
index 0000000..c1f523e
--- /dev/null
+++ b/board/siemens/common/ddr_si_test.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright Siemens AG 2023
+ *
+ * DDR signal integrity test
+ * Check signals on DDR lines
+ * - signals must be as fast as possible and generate long burst
+ * - signals must be unidirectional (to DDR or from DDR only)
+ *
+ * Set pattern: define 2^n 32-bit patterns (up to 4)
+ * Addresses: must be multiple of 16 to avoid checks in loops
+ * Test functions
+ * - write: write pattern to memory area for iteration times
+ * - read: write pattern once to memory area, read for iteration times
+ */
+
+#include <command.h>
+#include <exports.h>
+#include <time.h>
+#if CONFIG_IS_ENABLED(AM33XX)
+#include <asm/arch-am33xx/hardware_am33xx.h>
+#include <asm/arch-am33xx/cpu.h>
+#include <asm/io.h>
+#endif
+
+/* enable some print for debugging */
+#ifdef PR_DEBUG
+ #define PDEBUG(fmt, args...) printf(fmt, ## args)
+#else
+ #define PDEBUG(fmt, args...)
+#endif
+
+/* define 4 32-bit patterns */
+#define MAX_PTN_SIZE (128)
+#define PTN_ARRAY_SIZE (MAX_PTN_SIZE / (8 * sizeof(u32)))
+
+/* define test direction */
+#define DIR_READ 0
+#define DIR_WRITE 1
+
+static union {
+ u64 l[2];
+ u32 s[4];
+ } test_pattern;
+static int num_ptn32;
+
+#if CONFIG_IS_ENABLED(AM33XX)
+static inline void wdt_disable(void)
+{
+ struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+}
+
+static inline void wdt_enable(void)
+{
+ struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+
+ writel(0xBBBB, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x4444, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+}
+#else /* ! */
+static inline void wdt_disable(void) {}
+
+static inline void wdt_enable(void) {}
+#endif /* CONFIG_IS_ENABLED(AM33XX) */
+
+static int do_ddr_set_ptn(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ int i, n;
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+
+ /* number of patterns: 2 exponent */
+ n = argc - 1;
+ if (n > PTN_ARRAY_SIZE || (n & (n - 1)))
+ return CMD_RET_USAGE;
+ num_ptn32 = n;
+
+ /* get patterns */
+ for (i = 0; i < n; i++)
+ test_pattern.s[i] = simple_strtoul(argv[i + 1], NULL, 0);
+
+ printf("Test pattern set\n");
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_ddr_show_ptn(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ if (!num_ptn32) {
+ printf("No pattern available\n");
+ } else {
+ u32 *buf = test_pattern.s;
+ int len = num_ptn32;
+ int i;
+
+ printf("Pattern: ");
+ for (i = 0 ; i < len; i++)
+ printf("0x%08X ", *buf++);
+
+ printf("\n");
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static void ddr_read32(u64 start_addr, u64 n_word, unsigned long iter)
+{
+ while (iter--) {
+ register volatile u32 *addr = (u32 *)start_addr;
+ register u64 count = n_word;
+
+ while (count) {
+ (void)*addr++;
+ PDEBUG("Read 0x%08X from 0x%p\n", val, addr - 1);
+ count--;
+ }
+ }
+}
+
+static void ddr_read64(u64 start_addr, u64 n_word, unsigned long iter)
+{
+ while (iter--) {
+ register volatile u64 *addr = (u64 *)start_addr;
+ register u64 count = n_word;
+
+ if (num_ptn32 == 4)
+ count *= 2;
+
+ /*
+ * 64 & 128 bit pattern. Increase the nummber of read
+ * commands in the loop to generate longer burst signal
+ */
+ while (count) {
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ (void)*addr++;
+ PDEBUG("Read 0x%016llX from 0x%p\n", val, addr - 1);
+ /*
+ * underflow cannot happen since n_word = end -
+ * start, end & start addresses are checked to be
+ * multiple of 16
+ */
+ count -= 8;
+ }
+ }
+}
+
+static void ddr_write32(u64 start_addr, u64 n_word, unsigned long iter)
+{
+ while (iter--) {
+ register u32 *addr = (u32 *)start_addr;
+ register u32 ptn = *test_pattern.s;
+ register u64 count = n_word;
+
+ while (count) {
+ PDEBUG("Write 0x%08X to 0x%p\n", ptn, addr);
+ *addr++ = ptn;
+ count--;
+ }
+ }
+}
+
+static void ddr_write64(u64 start_addr, u64 n_word, unsigned long iter)
+{
+ while (iter--) {
+ register u64 *addr = (u64 *)start_addr;
+ register u64 ptnA = test_pattern.l[0];
+ register u64 ptnB = test_pattern.l[1];
+ register u64 count = n_word;
+
+ if (num_ptn32 == 2)
+ ptnB = ptnA;
+ else
+ count *= 2;
+
+ /*
+ * 64 & 128 bit pattern. Increase the nummber of write
+ * commands in the loop to generate longer burst signal
+ */
+ while (count) {
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnA, addr);
+ *addr++ = ptnA;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnB, addr);
+ *addr++ = ptnB;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnA, addr);
+ *addr++ = ptnA;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnB, addr);
+ *addr++ = ptnB;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnA, addr);
+ *addr++ = ptnA;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnB, addr);
+ *addr++ = ptnB;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnA, addr);
+ *addr++ = ptnA;
+ PDEBUG("Write 0x%016llX to 0x%p\n", ptnB, addr);
+ *addr++ = ptnB;
+ /*
+ * underflow cannot happen since n_word = end -
+ * start, end & start addresses are checked to be
+ * multiple of 16
+ */
+ count -= 8;
+ }
+ }
+}
+
+static int do_ddr_si_test(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ u64 start_addr, end_addr, n_word;
+ u64 ts_start, ts_end;
+ unsigned long iteration, wr_iter;
+ int direction, i;
+
+ if (argc < 3 || argc > 4)
+ return CMD_RET_USAGE;
+
+ /* get arguments */
+ direction = strcmp(argv[0], "read") ? DIR_WRITE : DIR_READ;
+ start_addr = simple_strtoul(argv[1], NULL, 0);
+ end_addr = simple_strtoul(argv[2], NULL, 0);
+ iteration = simple_strtoul(argv[3], NULL, 10);
+
+ n_word = (end_addr - start_addr) / (num_ptn32 * 4);
+ printf("\nDDR signal integrity %s test: start\n", argv[0]);
+ /* checks */
+ if (start_addr & 0xF) {
+ printf("ERROR: start_address should be 16 bytes aligned\n\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (end_addr & 0xF) {
+ printf("ERROR: end_address should be 16 bytes aligned\n\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (start_addr >= end_addr) {
+ printf("ERROR: end_address is not bigger than start_address\n\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (!iteration) {
+ printf("ERROR: no iteration specified\n\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (!num_ptn32) {
+ printf("ERROR: no test pattern specified\n\n");
+ return CMD_RET_USAGE;
+ }
+
+ /* print parameters */
+ printf("start_address = 0x%016llX\n", start_addr);
+ printf("end_address = 0x%016llX\n", end_addr);
+ printf("iterations = %lu\n", iteration);
+
+ /* print pattern */
+ printf("test pattern 0x");
+ for (i = 0; i < num_ptn32; i++)
+ printf("%08X", test_pattern.s[i]);
+
+ printf("\n");
+
+ wdt_disable();
+
+ /* writing */
+ printf("Writing..\n");
+ ts_start = get_timer_us(0);
+
+ if (direction == DIR_READ)
+ wr_iter = 1;
+ else
+ wr_iter = iteration;
+
+ if (num_ptn32 == 1)
+ ddr_write32(start_addr, n_word, wr_iter);
+ else
+ ddr_write64(start_addr, n_word, wr_iter);
+
+ ts_end = get_timer_us(0);
+
+ /* reading */
+ if (direction == DIR_READ) {
+ printf("Reading..\n");
+ /* we need read time, just overwrite */
+ ts_start = get_timer_us(0);
+
+ if (num_ptn32 == 1)
+ ddr_read32(start_addr, n_word, iteration);
+ else
+ ddr_read64(start_addr, n_word, iteration);
+
+ ts_end = get_timer_us(0);
+ }
+
+ wdt_enable();
+
+ /* print stats */
+ printf("DONE.");
+ printf(" Bytes=%llu ", n_word * num_ptn32 * 4 * iteration);
+ printf(" Time=%llu us ", ts_end - ts_start);
+ printf("\nDDR signal integrity %s test: end\n", argv[0]);
+
+ return CMD_RET_SUCCESS;
+}
+
+static char ddr_si_help_text[] =
+ "- DDR signal integrity test\n\n"
+ "ddr_si setptn <pattern> [<pattern>] : set [1,2,4] 32-bit patterns\n"
+ "ddr_si showptn : show patterns\n"
+ "ddr_si read <start> <end> <iterations> : run test for reading\n"
+ "ddr_si write <start> <end> <iterations> : run test for writing\n"
+ "\nWith\n"
+ "\t<pattern>: 32-bit pattern in hex format\n"
+ "\t<start>: test start address in hex format\n"
+ "\t<end>: test end address in hex format\n"
+ "\t<iterations>: number of iterations\n";
+
+U_BOOT_CMD_WITH_SUBCMDS(ddr_si, "DDR si test", ddr_si_help_text,
+ U_BOOT_SUBCMD_MKENT(setptn, 5, 0, do_ddr_set_ptn),
+ U_BOOT_SUBCMD_MKENT(showptn, 1, 0, do_ddr_show_ptn),
+ U_BOOT_SUBCMD_MKENT(read, 4, 0, do_ddr_si_test),
+ U_BOOT_SUBCMD_MKENT(write, 4, 0, do_ddr_si_test));
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
index 935f340..77f35a6 100644
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@@ -11,6 +11,8 @@
#ifndef _BOARD_DRACO_H_
#define _BOARD_DRACO_H_
+#include "../common/board.h"
+
#define PARGS(x) #x , /* Parameter Name */ \
settings.ddr3.x, /* EEPROM Value */ \
ddr3_default.x, /* Default Value */ \
@@ -18,8 +20,6 @@
#define PRINTARGS(y) printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
-#define MAGIC_CHIP 0x50494843
-
/* Automatic generated definition */
/* Wed, 16 Apr 2014 16:50:41 +0200 */
/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
@@ -43,12 +43,6 @@
char manu_marking[32]; /* "default \0" */
};
-struct chip_data {
- unsigned int magic;
- char sdevname[16];
- char shwver[7];
-};
-
struct draco_baseboard_id {
struct ddr3_data ddr3;
struct chip_data chip;
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index e9269ef..b543bf8 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -385,7 +385,7 @@
int phy_addr = -ENOENT;
#ifdef CONFIG_FEC_MXC
- bus = fec_get_miibus(ENET_BASE_ADDR, -1);
+ bus = fec_get_miibus(NULL, ENET_BASE_ADDR, -1);
if (!bus)
return -ENOENT;
diff --git a/board/ti/am62ax/am62ax.env b/board/ti/am62ax/am62ax.env
index 97122fb..96d9e1e 100644
--- a/board/ti/am62ax/am62ax.env
+++ b/board/ti/am62ax/am62ax.env
@@ -1,5 +1,6 @@
#include <env/ti/ti_common.env>
#include <env/ti/mmc.env>
+#include <env/ti/k3_dfu.env>
#if CONFIG_CMD_REMOTEPROC
#include <env/ti/k3_rproc.env>
#endif
diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index 2cfeb3b..9bcf67b 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -326,4 +326,27 @@
void spl_board_init(void)
{
+ struct udevice *dev;
+ int ret;
+
+ if (IS_ENABLED(CONFIG_ESM_K3)) {
+ const char * const esms[] = {"esm@700000", "esm@40800000", "esm@42080000"};
+
+ for (int i = 0; i < ARRAY_SIZE(esms); ++i) {
+ ret = uclass_get_device_by_name(UCLASS_MISC, esms[i],
+ &dev);
+ if (ret) {
+ printf("MISC init for %s failed: %d\n", esms[i], ret);
+ break;
+ }
+ }
+ }
+
+ if (IS_ENABLED(CONFIG_ESM_PMIC) && ret == 0) {
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_DRIVER_GET(pmic_esm),
+ &dev);
+ if (ret)
+ printf("ESM PMIC init failed: %d\n", ret);
+ }
}
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index a6e3c6a..0fb49fc 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -70,97 +70,95 @@
#define TARGET_IS_ENABLED(x) IS_ENABLED(CONFIG_TARGET_ ## x)
const struct toradex_som toradex_modules[] = {
- [0] = { "UNKNOWN MODULE", 0 },
- [1] = { "Colibri PXA270 312MHz", 0 },
- [2] = { "Colibri PXA270 520MHz", 0 },
- [3] = { "Colibri PXA320 806MHz", 0 },
- [4] = { "Colibri PXA300 208MHz", 0 },
- [5] = { "Colibri PXA310 624MHz", 0 },
- [6] = { "Colibri PXA320IT 806MHz", 0 },
- [7] = { "Colibri PXA300 208MHz XT", 0 },
- [8] = { "Colibri PXA270 312MHz", 0 },
- [9] = { "Colibri PXA270 520MHz", 0 },
- [10] = { "Colibri VF50 128MB", TARGET_IS_ENABLED(COLIBRI_VF) },
- [11] = { "Colibri VF61 256MB", TARGET_IS_ENABLED(COLIBRI_VF) },
- [12] = { "Colibri VF61 256MB IT", TARGET_IS_ENABLED(COLIBRI_VF) },
- [13] = { "Colibri VF50 128MB IT", TARGET_IS_ENABLED(COLIBRI_VF) },
- [14] = { "Colibri iMX6S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [15] = { "Colibri iMX6DL 512MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [16] = { "Colibri iMX6S 256MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [17] = { "Colibri iMX6DL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [18] = { "UNKNOWN MODULE", 0 },
- [19] = { "UNKNOWN MODULE", 0 },
- [20] = { "Colibri T20 256MB", TARGET_IS_ENABLED(COLIBRI_T20) },
- [21] = { "Colibri T20 512MB", TARGET_IS_ENABLED(COLIBRI_T20) },
- [22] = { "Colibri T20 512MB IT", TARGET_IS_ENABLED(COLIBRI_T20) },
- [23] = { "Colibri T30 1GB", TARGET_IS_ENABLED(COLIBRI_T30) },
- [24] = { "Colibri T20 256MB IT", TARGET_IS_ENABLED(COLIBRI_T20) },
- [25] = { "Apalis T30 2GB", TARGET_IS_ENABLED(APALIS_T30) },
- [26] = { "Apalis T30 1GB", TARGET_IS_ENABLED(APALIS_T30) },
- [27] = { "Apalis iMX6Q 1GB", TARGET_IS_ENABLED(APALIS_IMX6) },
- [28] = { "Apalis iMX6Q 2GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
- [29] = { "Apalis iMX6D 512MB", TARGET_IS_ENABLED(APALIS_IMX6) },
- [30] = { "Colibri T30 1GB IT", TARGET_IS_ENABLED(COLIBRI_T30) },
- [31] = { "Apalis T30 1GB IT", TARGET_IS_ENABLED(APALIS_T30) },
- [32] = { "Colibri iMX7S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
- [33] = { "Colibri iMX7D 512MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
- [34] = { "Apalis TK1 2GB", TARGET_IS_ENABLED(APALIS_TK1) },
- [35] = { "Apalis iMX6D 1GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
- [36] = { "Colibri iMX6ULL 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
- [37] = { "Apalis iMX8QM 4GB WB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
- [38] = { "Colibri iMX8QXP 2GB WB IT", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
- [39] = { "Colibri iMX7D 1GB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
- [40] = { "Colibri iMX6ULL 512MB WB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
- [41] = { "Colibri iMX7D 512MB EPDC", TARGET_IS_ENABLED(COLIBRI_IMX7) },
- [42] = { "Apalis TK1 4GB", TARGET_IS_ENABLED(APALIS_TK1) },
- [43] = { "Colibri T20 512MB IT SETEK", TARGET_IS_ENABLED(COLIBRI_T20) },
- [44] = { "Colibri iMX6ULL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
- [45] = { "Colibri iMX6ULL 512MB WB", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
- [46] = { "Apalis iMX8QXP 2GB WB IT", 0 },
- [47] = { "Apalis iMX8QM 4GB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
- [48] = { "Apalis iMX8QP 2GB WB", TARGET_IS_ENABLED(APALIS_IMX8) },
- [49] = { "Apalis iMX8QP 2GB", TARGET_IS_ENABLED(APALIS_IMX8) },
- [50] = { "Colibri iMX8QXP 2GB IT", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
- [51] = { "Colibri iMX8DX 1GB WB", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
- [52] = { "Colibri iMX8DX 1GB", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
- [53] = { "Apalis iMX8QXP 2GB ECC IT", 0 },
- [54] = { "Apalis iMX8DXP 1GB", TARGET_IS_ENABLED(APALIS_IMX8) },
- [55] = { "Verdin iMX8M Mini Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [56] = { "Verdin iMX8M Nano Quad 1GB WB", 0 },
- [57] = { "Verdin iMX8M Mini DualLite 1GB", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [58] = { "Verdin iMX8M Plus Quad 4GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [59] = { "Verdin iMX8M Mini Quad 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [60] = { "Verdin iMX8M Mini DualLite 1GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [61] = { "Verdin iMX8M Plus Quad 2GB", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [62] = { "Colibri iMX6ULL 1GB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
- [63] = { "Verdin iMX8M Plus Quad 4GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [64] = { "Verdin iMX8M Plus Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [65] = { "Verdin iMX8M Plus QuadLite 1GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [66] = { "Verdin iMX8M Plus Quad 8GB WB", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [67] = { "Apalis iMX8QM 8GB WB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
- [68] = { "Verdin iMX8M Mini Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [69] = { "Verdin AM62 Quad 1GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [70] = { "Verdin iMX8M Plus Quad 8GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
- [71] = { "Verdin AM62 Solo 512MB", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [72] = { "Verdin AM62 Solo 512MB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [73] = { "Verdin AM62 Dual 1GB ET", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [74] = { "Verdin AM62 Dual 1GB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [75] = { "Verdin AM62 Dual 1GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [76] = { "Verdin AM62 Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
- [77] = { "Colibri iMX6S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [78] = { "Colibri iMX6S 256MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [79] = { "Colibri iMX6DL 512MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [80] = { "Colibri iMX6DL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
- [81] = { "Colibri iMX7D 512MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
- [82] = { "Apalis iMX6D 512MB", TARGET_IS_ENABLED(APALIS_IMX6) },
- [83] = { "Apalis iMX6Q 1GB", TARGET_IS_ENABLED(APALIS_IMX6) },
- [84] = { "Apalis iMX6D 1GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
- [85] = { "Apalis iMX6Q 2GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
- [86] = { "Verdin iMX8M Mini DualLite 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [87] = { "Verdin iMX8M Mini Quad 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
- [88] = { "Aquila AM69 Octa 32GB WB IT", TARGET_IS_ENABLED(AQUILA_AM69_A72) },
- [89] = { "Verdin iMX95 Hexa 16GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX95) },
- [90] = { "Verdin iMX8M Mini Quad 4GB WB ET", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { 0, "UNKNOWN MODULE", 0 },
+ { COLIBRI_PXA270_V1_312MHZ, "Colibri PXA270 312MHz", 0 },
+ { COLIBRI_PXA270_V1_520MHZ, "Colibri PXA270 520MHz", 0 },
+ { COLIBRI_PXA320, "Colibri PXA320 806MHz", 0 },
+ { COLIBRI_PXA300, "Colibri PXA300 208MHz", 0 },
+ { COLIBRI_PXA310, "Colibri PXA310 624MHz", 0 },
+ { COLIBRI_PXA320_IT, "Colibri PXA320IT 806MHz", 0 },
+ { COLIBRI_PXA300_XT, "Colibri PXA300 208MHz XT", 0 },
+ { COLIBRI_PXA270_312MHZ, "Colibri PXA270 312MHz", 0 },
+ { COLIBRI_PXA270_520MHZ, "Colibri PXA270 520MHz", 0 },
+ { COLIBRI_VF50, "Colibri VF50 128MB", TARGET_IS_ENABLED(COLIBRI_VF) },
+ { COLIBRI_VF61, "Colibri VF61 256MB", TARGET_IS_ENABLED(COLIBRI_VF) },
+ { COLIBRI_VF61_IT, "Colibri VF61 256MB IT", TARGET_IS_ENABLED(COLIBRI_VF) },
+ { COLIBRI_VF50_IT, "Colibri VF50 128MB IT", TARGET_IS_ENABLED(COLIBRI_VF) },
+ { COLIBRI_IMX6S, "Colibri iMX6S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6DL, "Colibri iMX6DL 512MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6S_IT, "Colibri iMX6S 256MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6DL_IT, "Colibri iMX6DL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_T20_256MB, "Colibri T20 256MB", TARGET_IS_ENABLED(COLIBRI_T20) },
+ { COLIBRI_T20_512MB, "Colibri T20 512MB", TARGET_IS_ENABLED(COLIBRI_T20) },
+ { COLIBRI_T20_512MB_IT, "Colibri T20 512MB IT", TARGET_IS_ENABLED(COLIBRI_T20) },
+ { COLIBRI_T30, "Colibri T30 1GB", TARGET_IS_ENABLED(COLIBRI_T30) },
+ { COLIBRI_T20_256MB_IT, "Colibri T20 256MB IT", TARGET_IS_ENABLED(COLIBRI_T20) },
+ { APALIS_T30_2GB, "Apalis T30 2GB", TARGET_IS_ENABLED(APALIS_T30) },
+ { APALIS_T30_1GB, "Apalis T30 1GB", TARGET_IS_ENABLED(APALIS_T30) },
+ { APALIS_IMX6Q, "Apalis iMX6Q 1GB", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { APALIS_IMX6Q_IT, "Apalis iMX6Q 2GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { APALIS_IMX6D, "Apalis iMX6D 512MB", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { COLIBRI_T30_IT, "Colibri T30 1GB IT", TARGET_IS_ENABLED(COLIBRI_T30) },
+ { APALIS_T30_IT, "Apalis T30 1GB IT", TARGET_IS_ENABLED(APALIS_T30) },
+ { COLIBRI_IMX7S, "Colibri iMX7S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
+ { COLIBRI_IMX7D, "Colibri iMX7D 512MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
+ { APALIS_TK1_2GB, "Apalis TK1 2GB", TARGET_IS_ENABLED(APALIS_TK1) },
+ { APALIS_IMX6D_IT, "Apalis iMX6D 1GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { COLIBRI_IMX6ULL, "Colibri iMX6ULL 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
+ { APALIS_IMX8QM_WIFI_BT_IT, "Apalis iMX8QM 4GB WB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { COLIBRI_IMX8QXP_WIFI_BT_IT, "Colibri iMX8QXP 2GB WB IT", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
+ { COLIBRI_IMX7D_EMMC, "Colibri iMX7D 1GB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
+ { COLIBRI_IMX6ULL_WIFI_BT_IT, "Colibri iMX6ULL 512MB WB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
+ { COLIBRI_IMX7D_EPDC, "Colibri iMX7D 512MB EPDC", TARGET_IS_ENABLED(COLIBRI_IMX7) },
+ { APALIS_TK1_4GB, "Apalis TK1 4GB", TARGET_IS_ENABLED(APALIS_TK1) },
+ { COLIBRI_T20_512MB_IT_SETEK, "Colibri T20 512MB IT SETEK", TARGET_IS_ENABLED(COLIBRI_T20) },
+ { COLIBRI_IMX6ULL_IT, "Colibri iMX6ULL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
+ { COLIBRI_IMX6ULL_WIFI_BT, "Colibri iMX6ULL 512MB WB", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
+ { APALIS_IMX8QXP_WIFI_BT_IT, "Apalis iMX8QXP 2GB WB IT", 0 },
+ { APALIS_IMX8QM_IT, "Apalis iMX8QM 4GB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { APALIS_IMX8QP_WIFI_BT, "Apalis iMX8QP 2GB WB", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { APALIS_IMX8QP, "Apalis iMX8QP 2GB", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { COLIBRI_IMX8QXP_IT, "Colibri iMX8QXP 2GB IT", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
+ { COLIBRI_IMX8DX_WIFI_BT, "Colibri iMX8DX 1GB WB", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
+ { COLIBRI_IMX8DX, "Colibri iMX8DX 1GB", TARGET_IS_ENABLED(COLIBRI_IMX8X) },
+ { APALIS_IMX8QXP, "Apalis iMX8QXP 2GB ECC IT", 0 },
+ { APALIS_IMX8DXP, "Apalis iMX8DXP 1GB", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { VERDIN_IMX8MMQ_WIFI_BT_IT, "Verdin iMX8M Mini Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_IMX8MNQ_WIFI_BT, "Verdin iMX8M Nano Quad 1GB WB", 0 },
+ { VERDIN_IMX8MMDL, "Verdin iMX8M Mini DualLite 1GB", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_IMX8MPQ_WIFI_BT_IT, "Verdin iMX8M Plus Quad 4GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { VERDIN_IMX8MMQ_IT, "Verdin iMX8M Mini Quad 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_IMX8MMDL_WIFI_BT_IT, "Verdin iMX8M Mini DualLite 1GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_IMX8MPQ, "Verdin iMX8M Plus Quad 2GB", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { COLIBRI_IMX6ULL_IT_EMMC, "Colibri iMX6ULL 1GB IT", TARGET_IS_ENABLED(COLIBRI_IMX6ULL) },
+ { VERDIN_IMX8MPQ_IT, "Verdin iMX8M Plus Quad 4GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { VERDIN_IMX8MPQ_2GB_WIFI_BT_IT, "Verdin iMX8M Plus Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { VERDIN_IMX8MPQL_IT, "Verdin iMX8M Plus QuadLite 1GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { VERDIN_IMX8MPQ_8GB_WIFI_BT, "Verdin iMX8M Plus Quad 8GB WB", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { APALIS_IMX8QM_8GB_WIFI_BT_IT, "Apalis iMX8QM 8GB WB IT", TARGET_IS_ENABLED(APALIS_IMX8) },
+ { VERDIN_IMX8MMQ_WIFI_BT_IT_NO_CAN, "Verdin iMX8M Mini Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_AM62Q_WIFI_BT_IT, "Verdin AM62 Quad 1GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_IMX8MPQ_8GB_WIFI_BT_IT, "Verdin iMX8M Plus Quad 8GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX8MP) },
+ { VERDIN_AM62S_512MB, "Verdin AM62 Solo 512MB", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_AM62S_512MB_WIFI_BT_IT, "Verdin AM62 Solo 512MB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_AM62D_1G_ET, "Verdin AM62 Dual 1GB ET", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_AM62D_1G_IT, "Verdin AM62 Dual 1GB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_AM62D_1G_WIFI_BT_IT, "Verdin AM62 Dual 1GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { VERDIN_AM62Q_2G_WIFI_BT_IT, "Verdin AM62 Quad 2GB WB IT", TARGET_IS_ENABLED(VERDIN_AM62_A53) },
+ { COLIBRI_IMX6S_NOWINCE, "Colibri iMX6S 256MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6S_IT_NOWINCE, "Colibri iMX6S 256MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6DL_NOWINCE, "Colibri iMX6DL 512MB", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX6DL_IT_NOWINCE, "Colibri iMX6DL 512MB IT", TARGET_IS_ENABLED(COLIBRI_IMX6) },
+ { COLIBRI_IMX7D_NOWINCE, "Colibri iMX7D 512MB", TARGET_IS_ENABLED(COLIBRI_IMX7) },
+ { APALIS_IMX6D_NOWINCE, "Apalis iMX6D 512MB", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { APALIS_IMX6Q_NOWINCE, "Apalis iMX6Q 1GB", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { APALIS_IMX6D_IT_NOWINCE, "Apalis iMX6D 1GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { APALIS_IMX6Q_IT_NOWINCE, "Apalis iMX6Q 2GB IT", TARGET_IS_ENABLED(APALIS_IMX6) },
+ { VERDIN_IMX8MMDL_2G_IT, "Verdin iMX8M Mini DualLite 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { VERDIN_IMX8MMQ_2G_IT_NO_CAN, "Verdin iMX8M Mini Quad 2GB IT", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
+ { AQUILA_AM69O_32G_WIFI_BT_IT, "Aquila AM69 Octa 32GB WB IT", TARGET_IS_ENABLED(AQUILA_AM69_A72) },
+ { VERDIN_IMX95H_16G_WIFI_BT_IT, "Verdin iMX95 Hexa 16GB WB IT", TARGET_IS_ENABLED(VERDIN_IMX95) },
+ { VERDIN_IMX8MMQ_4G_WIFI_BT_ET, "Verdin iMX8M Mini Quad 4GB WB ET", TARGET_IS_ENABLED(VERDIN_IMX8MM) },
};
struct pid4list {
@@ -188,6 +186,20 @@
[1] = 0x8c06cbUL,
};
+int get_toradex_modules_idx(int pid4)
+{
+ int i, index = 0;
+
+ for (i = 1; i < ARRAY_SIZE(toradex_modules); i++) {
+ if (pid4 == toradex_modules[i].pid4) {
+ index = i;
+ break;
+ }
+ }
+
+ return index;
+}
+
const char * const get_toradex_carrier_boards(int pid4)
{
int i, index = 0;
@@ -361,7 +373,7 @@
int read_tdx_cfg_block(void)
{
- int ret = 0;
+ int idx, ret = 0;
u8 *config_block = NULL;
struct toradex_tag *tag;
size_t size = TDX_CFG_BLOCK_MAX_SIZE;
@@ -430,7 +442,8 @@
}
/* Cap product id to avoid issues with a yet unknown one */
- if (tdx_hw_tag.prodid >= ARRAY_SIZE(toradex_modules))
+ idx = get_toradex_modules_idx(tdx_hw_tag.prodid);
+ if (!toradex_modules[idx].pid4)
tdx_hw_tag.prodid = 0;
out:
@@ -456,19 +469,21 @@
int len = 0;
int ret = 0;
unsigned int prodid;
- int i;
+ int i, idx;
printf("Enabled modules:\n");
for (i = 0; i < ARRAY_SIZE(toradex_modules); i++) {
if (toradex_modules[i].is_enabled)
- printf(" %04d %s\n", i, toradex_modules[i].name);
+ printf(" %04d %s\n", toradex_modules[i].pid4,
+ toradex_modules[i].name);
}
sprintf(message, "Enter the module ID: ");
len = cli_readline(message);
prodid = dectoul(console_buffer, NULL);
- if (prodid >= ARRAY_SIZE(toradex_modules) || !toradex_modules[prodid].is_enabled) {
+ idx = get_toradex_modules_idx(prodid);
+ if (!toradex_modules[idx].pid4 || !toradex_modules[idx].is_enabled) {
printf("Parsing module id failed\n");
return -1;
}
diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h
index 0d6dd1c..937e84c 100644
--- a/board/toradex/common/tdx-cfg-block.h
+++ b/board/toradex/common/tdx-cfg-block.h
@@ -21,6 +21,7 @@
} __attribute__((__packed__));
struct toradex_som {
+ int pid4;
const char *name;
int is_enabled;
};
@@ -139,6 +140,7 @@
int read_tdx_cfg_block(void);
int read_tdx_cfg_block_carrier(void);
+int get_toradex_modules_idx(int pid4);
const char * const get_toradex_carrier_boards(int pid4);
const char * const get_toradex_display_adapters(int pid4);
int try_migrate_tdx_cfg_block_carrier(void);
diff --git a/board/toradex/common/tdx-common.c b/board/toradex/common/tdx-common.c
index a6b45cd..f01fb36 100644
--- a/board/toradex/common/tdx-common.c
+++ b/board/toradex/common/tdx-common.c
@@ -191,13 +191,16 @@
static int tdx_get_str(struct udevice *dev, int id, size_t size, char *val)
{
int ret = -ENOTSUPP;
+ int idx;
switch (id) {
- case SYSINFO_ID_BOARD_MODEL:
+ case SYSID_BOARD_MODEL:
+ idx = get_toradex_modules_idx(tdx_hw_tag.prodid);
+
snprintf(val, size,
"Toradex %04d %s %s",
tdx_hw_tag.prodid,
- toradex_modules[tdx_hw_tag.prodid].name,
+ toradex_modules[idx].name,
tdx_board_rev_str);
ret = 0;
diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
index 0ff8440..f7152d6 100644
--- a/board/xilinx/Kconfig
+++ b/board/xilinx/Kconfig
@@ -40,6 +40,15 @@
endif
+config XILINX_MINI
+ bool "Mini configuration"
+ depends on ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
+ help
+ This option disables features which are not needed for Mini U-Boot
+ configurations. Mini U-Boot is running in EL3 mostly on size contrained
+ systems. It's purpose is to program non volatile memories or running
+ initial memory tests.
+
config XILINX_OF_BOARD_DTB_ADDR
hex "Default DTB pickup address"
default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 38dd805..a12dccd 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -19,6 +19,7 @@
#include <i2c.h>
#include <linux/sizes.h>
#include <malloc.h>
+#include <memtop.h>
#include <mtd_node.h>
#include "board.h"
#include <dm.h>
@@ -676,3 +677,31 @@
return 0;
}
#endif
+
+#ifndef CONFIG_XILINX_MINI
+
+#ifndef MMU_SECTION_SIZE
+#define MMU_SECTION_SIZE (1 * 1024 * 1024)
+#endif
+
+phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
+{
+ phys_size_t size;
+ phys_addr_t reg;
+
+ if (!total_size)
+ return gd->ram_top;
+
+ if (!IS_ALIGNED((ulong)gd->fdt_blob, 0x8))
+ panic("Not 64bit aligned DT location: %p\n", gd->fdt_blob);
+
+ size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE);
+ reg = get_mem_top(gd->ram_base, gd->ram_size, size,
+ (void *)gd->fdt_blob);
+ if (!reg)
+ reg = gd->ram_top - size;
+
+ return reg + size;
+}
+
+#endif
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index 3947467..fd5c6ce 100644
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -12,12 +12,15 @@
#include <env_internal.h>
#include <log.h>
#include <malloc.h>
+#include <memalign.h>
+#include <mmc.h>
#include <time.h>
#include <asm/cache.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
+#include <linux/sizes.h>
#include <dm/device.h>
#include <dm/uclass.h>
#include <versalpl.h>
@@ -301,9 +304,11 @@
return 0;
}
+#if !CONFIG_IS_ENABLED(SYSRESET)
void reset_cpu(void)
{
}
+#endif
#if defined(CONFIG_ENV_IS_NOWHERE)
enum env_location env_get_location(enum env_operation op, int prio)
@@ -336,3 +341,41 @@
}
}
#endif
+
+#if defined(CONFIG_SET_DFU_ALT_INFO)
+
+#define DFU_ALT_BUF_LEN SZ_1K
+
+void set_dfu_alt_info(char *interface, char *devstr)
+{
+ int bootseq = 0, len = 0;
+ u32 bootmode = versal_get_bootmode();
+
+ ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
+
+ if (env_get("dfu_alt_info"))
+ return;
+
+ memset(buf, 0, sizeof(buf));
+
+ switch (bootmode) {
+ case EMMC_MODE:
+ case SD_MODE:
+ case SD1_LSHFT_MODE:
+ case SD_MODE1:
+ bootseq = mmc_get_env_dev();
+
+ len += snprintf(buf + len, DFU_ALT_BUF_LEN, "mmc %d=boot",
+ bootseq);
+
+ len += snprintf(buf + len, DFU_ALT_BUF_LEN, ".bin fat %d 1",
+ bootseq);
+ break;
+ default:
+ return;
+ }
+
+ env_set("dfu_alt_info", buf);
+ puts("DFU alt info setting: done\n");
+}
+#endif
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
index 927f398..ff3a092 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -77,6 +77,7 @@
tpm_kd240=if test ${card1_rev} = A; then run tpm_reset; fi
board_setup=\
+rtc dev 0; \
zynqmp mmio_write 0xFFCA0010 0xfff 0; \
if test ${card1_name} = SCK-KV-G; then run kv260_setup; run tpm_kv260; fi;\
if test ${card1_name} = SCK-KR-G; then run kr260_setup; run tpm_reset; fi;\
diff --git a/boot/Kconfig b/boot/Kconfig
index 7dd30a0..99dcedc 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -283,21 +283,6 @@
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
-config USE_SPL_FIT_GENERATOR
- bool "Use a script to generate the .its script"
- depends on SPL_FIT
- default y if SPL_FIT && ARCH_ZYNQMP
-
-config SPL_FIT_GENERATOR
- string ".its file generator script for U-Boot FIT image"
- depends on USE_SPL_FIT_GENERATOR
- default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
- help
- Specifies a (platform specific) script file to generate the FIT
- source file used to build the U-Boot FIT image file. This gets
- passed a list of supported device tree file stub names to
- include in the generated image.
-
if VPL
config VPL_FIT
@@ -500,7 +485,6 @@
bool "Bootdev support for Android"
depends on X86 || ARM || SANDBOX
depends on CMDLINE
- select ANDROID_AB
select ANDROID_BOOT_IMAGE
select CMD_BCB
imply CMD_FASTBOOT
diff --git a/boot/bootmeth_android.c b/boot/bootmeth_android.c
index 19b1f2c..3a5144a 100644
--- a/boot/bootmeth_android.c
+++ b/boot/bootmeth_android.c
@@ -29,6 +29,7 @@
#define BCB_PART_NAME "misc"
#define BOOT_PART_NAME "boot"
#define VENDOR_BOOT_PART_NAME "vendor_boot"
+#define SLOT_LEN 2
/**
* struct android_priv - Private data
@@ -42,8 +43,10 @@
*/
struct android_priv {
enum android_boot_mode boot_mode;
- char slot[2];
+ char *slot;
u32 header_version;
+ u32 boot_img_size;
+ u32 vendor_boot_img_size;
};
static int android_check(struct udevice *dev, struct bootflow_iter *iter)
@@ -71,7 +74,11 @@
char *buf;
int ret;
- sprintf(partname, BOOT_PART_NAME "_%s", priv->slot);
+ if (priv->slot)
+ sprintf(partname, BOOT_PART_NAME "_%s", priv->slot);
+ else
+ sprintf(partname, BOOT_PART_NAME);
+
ret = part_get_info_by_name(desc, partname, &partition);
if (ret < 0)
return log_msg_ret("part info", ret);
@@ -93,7 +100,13 @@
return log_msg_ret("header", -ENOENT);
}
+ if (!android_image_get_bootimg_size(buf, &priv->boot_img_size)) {
+ free(buf);
+ return log_msg_ret("get bootimg size", -EINVAL);
+ }
+
priv->header_version = ((struct andr_boot_img_hdr_v0 *)buf)->header_version;
+
free(buf);
return 0;
@@ -108,7 +121,11 @@
char *buf;
int ret;
+ if (priv->slot)
+ sprintf(partname, VENDOR_BOOT_PART_NAME "_%s", priv->slot);
+ else
+ sprintf(partname, VENDOR_BOOT_PART_NAME);
+
- sprintf(partname, VENDOR_BOOT_PART_NAME "_%s", priv->slot);
ret = part_get_info_by_name(desc, partname, &partition);
if (ret < 0)
return log_msg_ret("part info", ret);
@@ -129,6 +146,12 @@
free(buf);
return log_msg_ret("header", -ENOENT);
}
+
+ if (!android_image_get_vendor_bootimg_size(buf, &priv->vendor_boot_img_size)) {
+ free(buf);
+ return log_msg_ret("get vendor bootimg size", -EINVAL);
+ }
+
free(buf);
return 0;
@@ -142,6 +165,11 @@
char slot_suffix[3];
int ret;
+ if (!CONFIG_IS_ENABLED(ANDROID_AB)) {
+ priv->slot = NULL;
+ return 0;
+ }
+
ret = part_get_info_by_name(desc, BCB_PART_NAME, &misc);
if (ret < 0)
return log_msg_ret("part", ret);
@@ -150,6 +178,7 @@
if (ret < 0)
return log_msg_ret("slot", ret);
+ priv->slot = malloc(SLOT_LEN);
priv->slot[0] = BOOT_SLOT_NAME(ret);
priv->slot[1] = '\0';
@@ -259,16 +288,12 @@
goto free_priv;
}
- if (priv->header_version != 4) {
- log_debug("only boot.img v4 is supported %u\n", priv->header_version);
- ret = -EINVAL;
- goto free_priv;
- }
-
- ret = scan_vendor_boot_part(bflow->blk, priv);
- if (ret < 0) {
- log_debug("scan vendor_boot failed: err=%d\n", ret);
- goto free_priv;
+ if (priv->header_version >= 3) {
+ ret = scan_vendor_boot_part(bflow->blk, priv);
+ if (ret < 0) {
+ log_debug("scan vendor_boot failed: err=%d\n", ret);
+ goto free_priv;
+ }
}
/*
@@ -278,7 +303,7 @@
configure_serialno(bflow);
configure_bootloader_version(bflow);
- if (priv->boot_mode == ANDROID_BOOT_MODE_NORMAL) {
+ if (priv->boot_mode == ANDROID_BOOT_MODE_NORMAL && priv->slot) {
ret = bootflow_cmdline_set_arg(bflow, "androidboot.force_normal_boot",
"1", false);
if (ret < 0) {
@@ -319,28 +344,44 @@
* @blk: Block device to read
* @name: Partition name to read
* @slot: Nul-terminated slot suffixed to partition name ("a\0" or "b\0")
+ * @image_size: Image size in bytes used when reading the partition
* @addr: Address where the partition content is loaded into
* Return: 0 if OK, negative errno on failure.
*/
static int read_slotted_partition(struct blk_desc *desc, const char *const name,
- const char slot[2], ulong addr)
+ const char slot[2], ulong image_size, ulong addr)
{
struct disk_partition partition;
char partname[PART_NAME_LEN];
+ size_t partname_len;
+ ulong num_blks = DIV_ROUND_UP(image_size, desc->blksz);
int ret;
u32 n;
+ /*
+ * Ensure name fits in partname.
+ * For A/B, it should be <name>_<slot>\0
+ * For non A/B, it should be <name>\0
+ */
+ if (CONFIG_IS_ENABLED(ANDROID_AB))
+ partname_len = PART_NAME_LEN - 2 - 1;
+ else
+ partname_len = PART_NAME_LEN - 1;
+
- /* Ensure name fits in partname it should be: <name>_<slot>\0 */
- if (strlen(name) > (PART_NAME_LEN - 2 - 1))
+ if (strlen(name) > partname_len)
return log_msg_ret("name too long", -EINVAL);
- sprintf(partname, "%s_%s", name, slot);
+ if (slot)
+ sprintf(partname, "%s_%s", name, slot);
+ else
+ sprintf(partname, "%s", name);
+
ret = part_get_info_by_name(desc, partname, &partition);
if (ret < 0)
return log_msg_ret("part", ret);
- n = blk_dread(desc, partition.start, partition.size, map_sysmem(addr, 0));
- if (n < partition.size)
+ n = blk_dread(desc, partition.start, num_blks, map_sysmem(addr, 0));
+ if (n < num_blks)
return log_msg_ret("part read", -EIO);
return 0;
@@ -386,7 +427,7 @@
AvbSlotVerifyData *out_data;
enum avb_boot_state boot_state;
char *extra_args;
- char slot_suffix[3];
+ char slot_suffix[3] = "";
bool unlocked = false;
int ret;
@@ -394,7 +435,8 @@
if (!avb_ops)
return log_msg_ret("avb ops", -ENOMEM);
- sprintf(slot_suffix, "_%s", priv->slot);
+ if (priv->slot)
+ sprintf(slot_suffix, "_%s", priv->slot);
ret = avb_ops->read_is_device_unlocked(avb_ops, &unlocked);
if (ret != AVB_IO_RESULT_OK)
@@ -472,16 +514,22 @@
if (ret < 0)
return log_msg_ret("read slot", ret);
- ret = read_slotted_partition(desc, "boot", priv->slot, loadaddr);
+ ret = read_slotted_partition(desc, "boot", priv->slot, priv->boot_img_size,
+ loadaddr);
if (ret < 0)
return log_msg_ret("read boot", ret);
- ret = read_slotted_partition(desc, "vendor_boot", priv->slot, vloadaddr);
- if (ret < 0)
- return log_msg_ret("read vendor_boot", ret);
-
+ if (priv->header_version >= 3) {
+ ret = read_slotted_partition(desc, "vendor_boot", priv->slot,
+ priv->vendor_boot_img_size, vloadaddr);
+ if (ret < 0)
+ return log_msg_ret("read vendor_boot", ret);
+ set_avendor_bootimg_addr(vloadaddr);
+ }
set_abootimg_addr(loadaddr);
- set_avendor_bootimg_addr(vloadaddr);
+
+ if (priv->slot)
+ free(priv->slot);
ret = bootm_boot_start(loadaddr, bflow->cmdline);
diff --git a/boot/image-android.c b/boot/image-android.c
index cd01278..93b54bf 100644
--- a/boot/image-android.c
+++ b/boot/image-android.c
@@ -178,6 +178,51 @@
data->boot_img_total_size = end - (ulong)hdr;
}
+bool android_image_get_bootimg_size(const void *hdr, u32 *boot_img_size)
+{
+ struct andr_image_data data;
+
+ if (!hdr || !boot_img_size) {
+ printf("hdr or boot_img_size can't be NULL\n");
+ return false;
+ }
+
+ if (!is_android_boot_image_header(hdr)) {
+ printf("Incorrect boot image header\n");
+ return false;
+ }
+
+ if (((struct andr_boot_img_hdr_v0 *)hdr)->header_version <= 2)
+ android_boot_image_v0_v1_v2_parse_hdr(hdr, &data);
+ else
+ android_boot_image_v3_v4_parse_hdr(hdr, &data);
+
+ *boot_img_size = data.boot_img_total_size;
+
+ return true;
+}
+
+bool android_image_get_vendor_bootimg_size(const void *hdr, u32 *vendor_boot_img_size)
+{
+ struct andr_image_data data;
+
+ if (!hdr || !vendor_boot_img_size) {
+ printf("hdr or vendor_boot_img_size can't be NULL\n");
+ return false;
+ }
+
+ if (!is_android_vendor_boot_image_header(hdr)) {
+ printf("Incorrect vendor boot image header\n");
+ return false;
+ }
+
+ android_vendor_boot_image_v3_v4_parse_hdr(hdr, &data);
+
+ *vendor_boot_img_size = data.vendor_boot_img_total_size;
+
+ return true;
+}
+
bool android_image_get_data(const void *boot_hdr, const void *vendor_boot_hdr,
struct andr_image_data *data)
{
diff --git a/boot/image-board.c b/boot/image-board.c
index 1757e58..b726bd6 100644
--- a/boot/image-board.c
+++ b/boot/image-board.c
@@ -624,9 +624,10 @@
void *buf;
int conf_noffset;
int fit_img_result;
- const char *uname, *name;
+ const char *uname, *name, *compatible;
int err;
int devnum = 0; /* TODO support multi fpga platforms */
+ int flags = 0;
if (!IS_ENABLED(CONFIG_FPGA))
return -ENOSYS;
@@ -674,20 +675,29 @@
return fit_img_result;
}
+ conf_noffset = fit_image_get_node(buf, uname);
+ compatible = fdt_getprop(buf, conf_noffset, "compatible", NULL);
+ if (!compatible) {
+ printf("'fpga' image without 'compatible' property\n");
+ } else {
+ if (CONFIG_IS_ENABLED(FPGA_LOAD_SECURE))
+ flags = fpga_compatible2flag(devnum, compatible);
+ }
+
if (!fpga_is_partial_data(devnum, img_len)) {
name = "full";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_FULL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
- img_len, BIT_FULL, 0);
+ img_len, BIT_FULL, flags);
} else {
name = "partial";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_PARTIAL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
- img_len, BIT_PARTIAL, 0);
+ img_len, BIT_PARTIAL, flags);
}
if (err)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index b2d0348..4936a70 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -176,6 +176,13 @@
internal name) and clock frequency. Other information may be
available depending on the CPU driver.
+config CMD_UFETCH
+ bool "U-Boot fetch"
+ depends on BLK
+ help
+ Fetch utility for U-Boot (akin to neofetch). Prints information
+ about U-Boot and the board it is running on in a pleasing format.
+
config CMD_FWU_METADATA
bool "fwu metadata read"
depends on FWU_MULTI_BANK_UPDATE
@@ -2016,7 +2023,9 @@
config CMD_CDP
bool "cdp"
help
- Perform CDP network configuration
+ The cdp command is used to announce the U-Boot device in the network
+ and to retrieve configuration data including the VLAN id using the
+ proprietary Cisco Discovery Protocol (CDP).
config CMD_SNTP
bool "sntp"
@@ -2115,11 +2124,8 @@
config CMD_WGET
bool "wget"
- depends on CMD_NET
default y if SANDBOX
- select PROT_TCP if NET
- select PROT_TCP_LWIP if NET_LWIP
- select PROT_DNS_LWIP if NET_LWIP
+ select WGET
help
wget is a simple command to download kernel, or other files,
from a http server over TCP.
diff --git a/cmd/Makefile b/cmd/Makefile
index d1f369d..1e6d312 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -53,6 +53,7 @@
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_DEMO) += demo.o
obj-$(CONFIG_CMD_DM) += dm.o
+obj-$(CONFIG_CMD_UFETCH) += ufetch.o
obj-$(CONFIG_CMD_SOUND) += sound.o
ifdef CONFIG_POST
obj-$(CONFIG_CMD_DIAG) += diag.o
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 4c0e2ad..ae9e192 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -140,10 +140,6 @@
#endif
bdinfo_print_num_l("boot_params", (ulong)bd->bi_boot_params);
print_bi_dram(bd);
- if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) {
- bdinfo_print_num_l("sramstart", (ulong)bd->bi_sramstart);
- bdinfo_print_num_l("sramsize", (ulong)bd->bi_sramsize);
- }
bdinfo_print_num_l("flashstart", (ulong)bd->bi_flashstart);
bdinfo_print_num_l("flashsize", (ulong)bd->bi_flashsize);
bdinfo_print_num_l("flashoffset", (ulong)bd->bi_flashoffset);
diff --git a/cmd/net-lwip.c b/cmd/net-lwip.c
index 6f5fc74..0fd446e 100644
--- a/cmd/net-lwip.c
+++ b/cmd/net-lwip.c
@@ -27,6 +27,9 @@
#endif
#if defined(CONFIG_CMD_WGET)
-U_BOOT_CMD(wget, 3, 1, do_wget, "boot image via network using HTTP protocol",
- "[loadAddress] URL");
+U_BOOT_CMD(wget, 3, 1, do_wget,
+ "boot image via network using HTTP/HTTPS protocol",
+ "[loadAddress] url\n"
+ "wget [loadAddress] [host:]path"
+);
#endif
diff --git a/cmd/net.c b/cmd/net.c
index c90578e..79525f7 100644
--- a/cmd/net.c
+++ b/cmd/net.c
@@ -196,6 +196,8 @@
#if defined(CONFIG_CMD_WGET)
static int do_wget(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
{
+ wget_info = &default_wget_info;
+
return netboot_common(WGET, cmdtp, argc, argv);
}
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index 392f90f..1f25980 100644
--- a/cmd/nvedit.c
+++ b/cmd/nvedit.c
@@ -523,6 +523,9 @@
case 'f': /* force */
env_flag |= H_FORCE;
break;
+ case 'k':
+ env_flag |= H_NOCLEAR;
+ break;
default:
return cmd_usage(cmdtp);
}
@@ -1133,8 +1136,9 @@
#if defined(CONFIG_CMD_ENV_CALLBACK)
"callbacks - print callbacks and their associated variables\nenv "
#endif
- "default [-f] -a - [forcibly] reset default environment\n"
- "env default [-f] var [...] - [forcibly] reset variable(s) to their default values\n"
+ "default [-k] [-f] -a - [forcibly] reset default environment\n"
+ "env default [-k] [-f] var [...] - [forcibly] reset variable(s) to their default values\n"
+ " \"-k\": keep variables not defined in default environment\n"
"env delete [-f] var [...] - [forcibly] delete variable(s)\n"
#if defined(CONFIG_CMD_EDITENV)
"env edit name - edit environment variable\n"
diff --git a/cmd/sb.c b/cmd/sb.c
index 9245052..79f3fb0 100644
--- a/cmd/sb.c
+++ b/cmd/sb.c
@@ -15,10 +15,8 @@
char *const argv[])
{
#if CONFIG_IS_ENABLED(HANDOFF)
- struct spl_handoff *handoff = handoff_get();
-
- if (handoff)
- printf("SPL handoff magic %lx\n", handoff->arch.magic);
+ if (gd->spl_handoff)
+ printf("SPL handoff magic %lx\n", gd->spl_handoff->arch.magic);
else
printf("SPL handoff info not received\n");
diff --git a/cmd/ufetch.c b/cmd/ufetch.c
new file mode 100644
index 0000000..0b825d7
--- /dev/null
+++ b/cmd/ufetch.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Small "fetch" utility for U-Boot */
+
+#ifdef CONFIG_ARM64
+#include <asm/system.h>
+#endif
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <display_options.h>
+#include <mmc.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <cli.h>
+#include <command.h>
+#include <dm/ofnode.h>
+#include <env.h>
+#include <rand.h>
+#include <vsprintf.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <version.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define LINE_WIDTH 40
+#define BLUE "\033[38;5;4m"
+#define YELLOW "\033[38;5;11m"
+#define BOLD "\033[1m"
+#define RESET "\033[0m"
+static const char * const logo_lines[] = {
+ BLUE BOLD " ......::...... ",
+ BLUE BOLD " ...::::::::::::::::::... ",
+ BLUE BOLD " ..::::::::::::::::::::::::::.. ",
+ BLUE BOLD " .::::.:::::::::::::::...::::.::::. ",
+ BLUE BOLD " .::::::::::::::::::::..::::::::::::::. ",
+ BLUE BOLD " .::.:::::::::::::::::::" YELLOW "=*%#*" BLUE "::::::::::.::. ",
+ BLUE BOLD " .:::::::::::::::::....." YELLOW "*%%*-" BLUE ":....::::::::::. ",
+ BLUE BOLD " .:.:::...:::::::::.:-" YELLOW "===##*---==-" BLUE "::::::::::.:. ",
+ BLUE BOLD " .::::..::::........" YELLOW "-***#****###****-" BLUE "...::::::.:. ",
+ BLUE BOLD " ::.:.-" YELLOW "+***+=" BLUE "::-" YELLOW "=+**#%%%%%%%%%%%%###*= " BLUE "-::...::::. ",
+ BLUE BOLD ".:.::-" YELLOW "*****###%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE ":..:::: ",
+ BLUE BOLD ".::" YELLOW "##" BLUE ":" YELLOW "***#%%%%%%#####%%%%%%%####%%%%%####%%%*" BLUE "-.::. ",
+ BLUE BOLD ":.:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%#*****##%%%#*****##%%##*****#%%+" BLUE ".::.",
+ BLUE BOLD ".::" YELLOW "**==#%%%%%%%##****#%%%%##****#%%%%#****###%%" BLUE ":.. ",
+ BLUE BOLD "..:" YELLOW "#%" BLUE "::" YELLOW "*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%%%%+ " BLUE ".:.",
+ BLUE BOLD " ::" YELLOW "##" BLUE ":" YELLOW "+**#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%* " BLUE "-.:: ",
+ BLUE BOLD " ..::-" YELLOW "#****#%#%%%%%%%%%%%%%%%%%%%%%%%%%%#*=" BLUE "-..::. ",
+ BLUE BOLD " ...:=" YELLOW "*****=" BLUE "::-" YELLOW "=+**###%%%%%%%%###**+= " BLUE "--:...::: ",
+ BLUE BOLD " .::.::--:........::::::--::::::......::::::. ",
+ BLUE BOLD " .::.....::::::::::...........:::::::::.::. ",
+ BLUE BOLD " .::::::::::::::::::::::::::::::::::::. ",
+ BLUE BOLD " .::::.::::::::::::::::::::::.::::. ",
+ BLUE BOLD " ..::::::::::::::::::::::::::.. ",
+ BLUE BOLD " ...::::::::::::::::::... ",
+ BLUE BOLD " ......::...... ",
+};
+
+enum output_lines {
+ FIRST,
+ SECOND,
+ KERNEL,
+ SYSINFO,
+ HOST,
+ UPTIME,
+ IP,
+ CMDS,
+ CONSOLES,
+ FEATURES,
+ RELOCATION,
+ CORES,
+ MEMORY,
+ STORAGE,
+
+ /* Up to 10 storage devices... Should be enough for anyone right? */
+ _LAST_LINE = (STORAGE + 10),
+#define LAST_LINE (_LAST_LINE - 1UL)
+};
+
+/*
+ * TODO/ideas:
+ * - Refactor to not use a for loop
+ * - Handle multiple network interfaces
+ * - Include stats about number of bound/probed devices
+ * - Show U-Boot's size and malloc usage, fdt size, etc.
+ */
+
+
+static int do_ufetch(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ int num_lines = max(LAST_LINE + 1, ARRAY_SIZE(logo_lines));
+ const char *model, *compatible;
+ char *ipaddr;
+ int n_cmds, n_cpus = 0, ret, compatlen;
+ size_t size;
+ ofnode np;
+ struct udevice *dev;
+ struct blk_desc *desc;
+ bool skip_ascii = false;
+
+ if (argc > 1 && strcmp(argv[1], "-n") == 0) {
+ skip_ascii = true;
+ num_lines = LAST_LINE;
+ }
+
+ for (int line = 0; line < num_lines; line++) {
+ if (!skip_ascii) {
+ if (line < ARRAY_SIZE(logo_lines))
+ printf("%s ", logo_lines[line]);
+ else
+ printf("%*c ", LINE_WIDTH, ' ');
+ }
+ switch (line) {
+ case FIRST:
+ compatible = ofnode_read_string(ofnode_root(), "compatible");
+ if (!compatible)
+ compatible = "unknown";
+ printf(RESET "%s\n", compatible);
+ compatlen = strlen(compatible);
+ break;
+ case SECOND:
+ for (int j = 0; j < compatlen; j++)
+ putc('-');
+ putc('\n');
+ break;
+ case KERNEL:
+ printf("Kernel:" RESET " %s\n", U_BOOT_VERSION);
+ break;
+ case SYSINFO:
+ printf("Config:" RESET " %s_defconfig\n", CONFIG_SYS_CONFIG_NAME);
+ break;
+ case HOST:
+ model = ofnode_read_string(ofnode_root(), "model");
+ if (model)
+ printf("Host:" RESET " %s\n", model);
+ break;
+ case UPTIME:
+ printf("Uptime:" RESET " %ld seconds\n", get_timer(0) / 1000);
+ break;
+ case IP:
+ ipaddr = env_get("ipaddr");
+ if (!ipaddr)
+ ipaddr = "none";
+ printf("IP Address:" RESET " %s", ipaddr);
+ ipaddr = env_get("ipv6addr");
+ if (ipaddr)
+ printf(", %s\n", ipaddr);
+ else
+ putc('\n');
+ break;
+ case CMDS:
+ n_cmds = ll_entry_count(struct cmd_tbl, cmd);
+ printf("Commands:" RESET " %d (help)\n", n_cmds);
+ break;
+ case CONSOLES:
+ printf("Consoles:" RESET " %s", env_get("stdout"));
+ if (gd->baudrate)
+ printf(" (%d baud)", gd->baudrate);
+ putc('\n');
+ break;
+ case FEATURES:
+ printf("Features:" RESET " ");
+ if (IS_ENABLED(CONFIG_NET))
+ printf("Net");
+ if (IS_ENABLED(CONFIG_EFI_LOADER))
+ printf(", EFI");
+ if (IS_ENABLED(CONFIG_CMD_CAT))
+ printf(", cat :3");
+#ifdef CONFIG_ARM64
+ switch (current_el()) {
+ case 2:
+ printf(", VMs");
+ break;
+ case 3:
+ printf(", full control!");
+ break;
+ }
+#endif
+ printf("\n");
+ break;
+ case RELOCATION:
+ if (gd->flags & GD_FLG_SKIP_RELOC)
+ printf("Relocated:" RESET " no\n");
+ else
+ printf("Relocated:" RESET " to %#011lx\n", gd->relocaddr);
+ break;
+ case CORES:
+ ofnode_for_each_subnode(np, ofnode_path("/cpus")) {
+ if (ofnode_name_eq(np, "cpu"))
+ n_cpus++;
+ }
+ printf("CPU:" RESET " %d (1 in use)\n", n_cpus);
+ break;
+ case MEMORY:
+ for (int j = 0; j < CONFIG_NR_DRAM_BANKS && gd->bd->bi_dram[j].size; j++)
+ size += gd->bd->bi_dram[j].size;
+ printf("Memory:" RESET " ");
+ print_size(size, "\n");
+ break;
+ case STORAGE:
+ default:
+ ret = uclass_find_device_by_seq(UCLASS_BLK, line - STORAGE, &dev);
+ if (!ret && dev) {
+ desc = dev_get_uclass_plat(dev);
+ size = desc->lba * desc->blksz;
+ printf("%4s %d: " RESET, blk_get_uclass_name(desc->uclass_id),
+ desc->lun);
+ if (size)
+ print_size(size, "");
+ else
+ printf("No media");
+ } else if (ret == -ENODEV && (skip_ascii || line > ARRAY_SIZE(logo_lines))) {
+ break;
+ }
+ printf("\n");
+ }
+ }
+
+ printf(RESET "\n\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(ufetch, 2, 1, do_ufetch,
+ "U-Boot fetch utility",
+ "Print information about your device.\n"
+ " -n Don't print the ASCII logo"
+);
diff --git a/common/Makefile b/common/Makefile
index 2ee5ef9..3599156 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -7,6 +7,7 @@
ifndef CONFIG_XPL_BUILD
obj-y += init/
obj-y += main.o
+obj-y += memtop.o
obj-y += exports.o
obj-y += cli_getch.o cli_simple.o cli_readline.o
obj-$(CONFIG_HUSH_OLD_PARSER) += cli_hush.o
diff --git a/common/board_f.c b/common/board_f.c
index 98dc259..54c48d4 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -305,6 +305,17 @@
return 0;
}
+static int setup_spl_handoff(void)
+{
+#if CONFIG_IS_ENABLED(HANDOFF)
+ gd->spl_handoff = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF,
+ sizeof(struct spl_handoff));
+ debug("Found SPL hand-off info %p\n", gd->spl_handoff);
+#endif
+
+ return 0;
+}
+
__weak int arch_cpu_init(void)
{
return 0;
@@ -637,13 +648,6 @@
int setup_bdinfo(void)
{
- struct bd_info *bd = gd->bd;
-
- if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) {
- bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */
- bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */
- }
-
return arch_setup_bdinfo();
}
@@ -880,6 +884,7 @@
initf_bootstage, /* uses its own timer, so does not need DM */
event_init,
bloblist_maybe_init,
+ setup_spl_handoff,
#if defined(CONFIG_CONSOLE_RECORD_INIT_F)
console_record_init,
#endif
diff --git a/common/board_info.c b/common/board_info.c
index 33c260b..dc26e1a 100644
--- a/common/board_info.c
+++ b/common/board_info.c
@@ -18,9 +18,9 @@
const char *name;
enum sysinfo_id id;
} to_show[] = {
- { "Manufacturer", SYSINFO_ID_BOARD_MANUFACTURER},
- { "Prior-stage version", SYSINFO_ID_PRIOR_STAGE_VERSION },
- { "Prior-stage date", SYSINFO_ID_PRIOR_STAGE_DATE },
+ { "Manufacturer", SYSID_BOARD_MANUFACTURER},
+ { "Prior-stage version", SYSID_PRIOR_STAGE_VERSION },
+ { "Prior-stage date", SYSID_PRIOR_STAGE_DATE },
{ /* sentinel */ }
};
@@ -39,7 +39,7 @@
if (ret)
return ret;
- ret = sysinfo_get_str(dev, SYSINFO_ID_BOARD_MODEL, sizeof(str), str);
+ ret = sysinfo_get_str(dev, SYSID_BOARD_MODEL, sizeof(str), str);
if (ret)
return ret;
printf("Model: %s\n", str);
diff --git a/common/board_r.c b/common/board_r.c
index 62228a7..23ebc41 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -152,6 +152,15 @@
*/
gd->env_addr += gd->reloc_off;
#endif
+
+ /*
+ * For CONFIG_OF_EMBED case the FDT is embedded into ELF, available by
+ * __dtb_dt_begin. After U-boot ELF self-relocation to RAM top address
+ * it is worth to update fdt_blob in global_data
+ */
+ if (IS_ENABLED(CONFIG_OF_EMBED))
+ gd->fdt_blob = dtb_dt_embedded();
+
#ifdef CONFIG_EFI_LOADER
/*
* On the ARM architecture gd is mapped to a fixed register (r9 or x18).
@@ -287,13 +296,10 @@
return 0;
}
-static int initr_binman(void)
+static int __maybe_unused initr_binman(void)
{
int ret;
- if (!CONFIG_IS_ENABLED(BINMAN_FDT))
- return 0;
-
ret = binman_init();
if (ret)
printf("binman_init failed:%d\n", ret);
@@ -635,7 +641,9 @@
#ifdef CONFIG_EFI_LOADER
efi_memory_init,
#endif
+#ifdef CONFIG_BINMAN_FDT
initr_binman,
+#endif
#ifdef CONFIG_FSP_VERSION2
arch_fsp_init_r,
#endif
diff --git a/common/console.c b/common/console.c
index 2222470..863ac6a 100644
--- a/common/console.c
+++ b/common/console.c
@@ -745,11 +745,7 @@
}
if (IS_ENABLED(CONFIG_DEBUG_UART) && !(gd->flags & GD_FLG_SERIAL_READY)) {
- while (*s) {
- int ch = *s++;
-
- printch(ch);
- }
+ printascii(s);
return;
}
diff --git a/common/init/handoff.c b/common/init/handoff.c
index 86c020e..a7cd065 100644
--- a/common/init/handoff.c
+++ b/common/init/handoff.c
@@ -5,7 +5,6 @@
* Copyright 2018 Google, Inc
*/
-#include <bloblist.h>
#include <handoff.h>
#include <asm/global_data.h>
@@ -39,14 +38,3 @@
bd->bi_dram[i].size = ho->ram_bank[i].size;
}
}
-
-struct spl_handoff *handoff_get(void)
-{
- struct spl_handoff *handoff;
-
- handoff = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF,
- sizeof(struct spl_handoff));
- debug("Found SPL hand-off info %p\n", handoff);
-
- return handoff;
-}
diff --git a/common/memtop.c b/common/memtop.c
new file mode 100644
index 0000000..841d89e
--- /dev/null
+++ b/common/memtop.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <memtop.h>
+
+#include <asm/types.h>
+
+#define MEM_RGN_COUNT 16
+
+struct region {
+ phys_addr_t base;
+ phys_size_t size;
+};
+
+struct mem_region {
+ struct region rgn[MEM_RGN_COUNT];
+ uint count;
+};
+
+static void add_mem_region(struct mem_region *mem_rgn, phys_addr_t base,
+ phys_size_t size)
+{
+ long i;
+
+ for (i = mem_rgn->count; i >= 0; i--) {
+ if (i && base < mem_rgn->rgn[i - 1].base) {
+ mem_rgn->rgn[i] = mem_rgn->rgn[i - 1];
+ } else {
+ mem_rgn->rgn[i].base = base;
+ mem_rgn->rgn[i].size = size;
+ break;
+ }
+ }
+
+ mem_rgn->count++;
+}
+
+static void mem_regions_init(struct mem_region *mem)
+{
+ uint i;
+
+ mem->count = 0;
+ for (i = 0; i < MEM_RGN_COUNT; i++) {
+ mem->rgn[i].base = 0;
+ mem->rgn[i].size = 0;
+ }
+}
+
+static int fdt_add_reserved_regions(struct mem_region *free_mem,
+ struct mem_region *reserved_mem,
+ void *fdt_blob)
+{
+ u64 addr, size;
+ int i, total, ret;
+ int nodeoffset, subnode;
+ struct fdt_resource res;
+
+ if (fdt_check_header(fdt_blob) != 0)
+ return -1;
+
+ /* process memreserve sections */
+ total = fdt_num_mem_rsv(fdt_blob);
+ assert_noisy(total < MEM_RGN_COUNT);
+ for (i = 0; i < total; i++) {
+ if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
+ continue;
+ add_mem_region(reserved_mem, addr, size);
+ }
+
+ i = 0;
+ /* process reserved-memory */
+ nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory");
+ if (nodeoffset >= 0) {
+ subnode = fdt_first_subnode(fdt_blob, nodeoffset);
+ while (subnode >= 0) {
+ /* check if this subnode has a reg property */
+ ret = fdt_get_resource(fdt_blob, subnode, "reg", 0,
+ &res);
+ if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) {
+ addr = res.start;
+ size = res.end - res.start + 1;
+ assert_noisy(i < MEM_RGN_COUNT);
+ add_mem_region(reserved_mem, addr, size);
+ }
+
+ subnode = fdt_next_subnode(fdt_blob, subnode);
+ ++i;
+ }
+ }
+
+ return 0;
+}
+
+static long addrs_overlap(phys_addr_t base1, phys_size_t size1,
+ phys_addr_t base2, phys_size_t size2)
+{
+ const phys_addr_t base1_end = base1 + size1 - 1;
+ const phys_addr_t base2_end = base2 + size2 - 1;
+
+ return ((base1 <= base2_end) && (base2 <= base1_end));
+}
+
+static long region_overlap_check(struct mem_region *mem_rgn, phys_addr_t base,
+ phys_size_t size)
+{
+ unsigned long i;
+ struct region *rgn = mem_rgn->rgn;
+
+ for (i = 0; i < mem_rgn->count; i++) {
+ phys_addr_t rgnbase = rgn[i].base;
+ phys_size_t rgnsize = rgn[i].size;
+
+ if (addrs_overlap(base, size, rgnbase, rgnsize))
+ break;
+ }
+
+ return (i < mem_rgn->count) ? i : -1;
+}
+
+static int find_ram_top(struct mem_region *free_mem,
+ struct mem_region *reserved_mem, phys_size_t size)
+{
+ long i, rgn;
+ phys_addr_t base = 0;
+ phys_addr_t res_base;
+
+ for (i = free_mem->count - 1; i >= 0; i--) {
+ phys_addr_t rgnbase = free_mem->rgn[i].base;
+ phys_size_t rgnsize = free_mem->rgn[i].size;
+
+ if (rgnsize < size)
+ continue;
+
+ base = rgnbase + rgnsize - size;
+ while (base && rgnbase <= base) {
+ rgn = region_overlap_check(reserved_mem, base, size);
+ if (rgn < 0)
+ return base;
+
+ res_base = reserved_mem->rgn[rgn].base;
+ if (res_base < size)
+ break;
+ base = res_base - size;
+ }
+ }
+
+ return 0;
+}
+
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+ phys_size_t size, void *fdt)
+{
+ int i;
+ struct mem_region free_mem;
+ struct mem_region reserved_mem;
+
+ mem_regions_init(&free_mem);
+ mem_regions_init(&reserved_mem);
+
+ add_mem_region(&free_mem, ram_start, ram_size);
+
+ i = fdt_add_reserved_regions(&free_mem, &reserved_mem, fdt);
+ if (i < 0)
+ return 0;
+
+ return find_ram_top(&free_mem, &reserved_mem, size);
+}
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 045fcac..240543c 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -462,6 +462,7 @@
config SPL_SYS_MALLOC_SIZE
hex "Size of the SPL malloc pool"
depends on SPL_SYS_MALLOC
+ default 0x180000 if BIOSEMU && RISCV
default 0x100000
config SPL_READ_ONLY
diff --git a/common/usb_onboard_hub.c b/common/usb_onboard_hub.c
index 68a04ac..6f28036 100644
--- a/common/usb_onboard_hub.c
+++ b/common/usb_onboard_hub.c
@@ -7,37 +7,203 @@
* Mostly inspired by Linux kernel v6.1 onboard_usb_hub driver
*/
+#include <asm/gpio.h>
#include <dm.h>
#include <dm/device_compat.h>
+#include <i2c.h>
+#include <linux/delay.h>
#include <power/regulator.h>
+#define USB5744_COMMAND_ATTACH 0x0056
+#define USB5744_COMMAND_ATTACH_LSB 0xAA
+#define USB5744_CONFIG_REG_ACCESS 0x0037
+#define USB5744_CONFIG_REG_ACCESS_LSB 0x99
+
struct onboard_hub {
struct udevice *vdd;
+ struct gpio_desc *reset_gpio;
+};
+
+struct onboard_hub_data {
+ unsigned long reset_us;
+ unsigned long power_on_delay_us;
+ int (*init)(struct udevice *dev);
};
+static int usb5744_i2c_init(struct udevice *dev)
+{
+ /*
+ * Prevent the MCU from the putting the HUB in suspend mode through register write.
+ * The BYPASS_UDC_SUSPEND bit (Bit 3) of the RuntimeFlags2 register at address
+ * 0x411D controls this aspect of the hub.
+ * Format to write to hub registers via SMBus- 2D 00 00 05 00 01 41 1D 08
+ * Byte 0: Address of slave 2D
+ * Byte 1: Memory address 00
+ * Byte 2: Memory address 00
+ * Byte 3: Number of bytes to write to memory
+ * Byte 4: Write configuration register (00)
+ * Byte 5: Write the number of data bytes (01- 1 data byte)
+ * Byte 6: LSB of register address 0x41
+ * Byte 7: MSB of register address 0x1D
+ * Byte 8: value to be written to the register
+ */
+ u8 data_buf[8] = {0x0, 0x5, 0x0, 0x1, 0x41, 0x1D, 0x08};
+ u8 config_reg_access_buf = USB5744_CONFIG_REG_ACCESS;
+ struct udevice *i2c_bus = NULL, *i2c_dev;
+ struct ofnode_phandle_args phandle;
+ u8 buf = USB5744_COMMAND_ATTACH;
+ struct dm_i2c_chip *i2c_chip;
+ int ret, slave_addr;
+
+ ret = dev_read_phandle_with_args(dev, "i2c-bus", NULL, 0, 0, &phandle);
+ if (ret) {
+ dev_err(dev, "i2c-bus not specified\n");
+ return ret;
+ }
+
+ ret = device_get_global_by_ofnode(ofnode_get_parent(phandle.node), &i2c_bus);
+ if (ret) {
+ dev_err(dev, "Failed to get i2c node, err: %d\n", ret);
+ return ret;
+ }
+
+ ret = ofnode_read_u32(phandle.node, "reg", &slave_addr);
+ if (ret)
+ return ret;
+
+ ret = i2c_get_chip(i2c_bus, slave_addr, 1, &i2c_dev);
+ if (ret) {
+ dev_err(dev, "%s: can't find i2c chip device for addr 0x%x\n", __func__,
+ slave_addr);
+ return ret;
+ }
+
+ i2c_chip = dev_get_parent_plat(i2c_dev);
+ if (!i2c_chip) {
+ dev_err(dev, "parent platform data not found\n");
+ return -EINVAL;
+ }
+
+ i2c_chip->flags &= ~DM_I2C_CHIP_WR_ADDRESS;
+ /* SMBus write command */
+ ret = dm_i2c_write(i2c_dev, 0, (uint8_t *)&data_buf, 8);
+ if (ret) {
+ dev_err(dev, "data_buf i2c_write failed, err:%d\n", ret);
+ return ret;
+ }
+
+ /* Configuration register access command */
+ ret = dm_i2c_write(i2c_dev, USB5744_CONFIG_REG_ACCESS_LSB,
+ &config_reg_access_buf, 2);
+ if (ret) {
+ dev_err(dev, "config_reg_access i2c_write failed, err: %d\n", ret);
+ return ret;
+ }
+
+ /* USB Attach with SMBus */
+ ret = dm_i2c_write(i2c_dev, USB5744_COMMAND_ATTACH_LSB, &buf, 2);
+ if (ret) {
+ dev_err(dev, "usb_attach i2c_write failed, err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int usb_onboard_hub_reset(struct udevice *dev)
+{
+ struct onboard_hub_data *data =
+ (struct onboard_hub_data *)dev_get_driver_data(dev);
+ struct onboard_hub *hub = dev_get_priv(dev);
+ int ret;
+
+ hub->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_IS_OUT);
+
+ /* property is optional, don't return error! */
+ if (!hub->reset_gpio)
+ return 0;
+
+ ret = dm_gpio_set_value(hub->reset_gpio, 1);
+ if (ret)
+ return ret;
+
+ udelay(data->reset_us);
+
+ ret = dm_gpio_set_value(hub->reset_gpio, 0);
+ if (ret)
+ return ret;
+
+ udelay(data->power_on_delay_us);
+
+ return 0;
+}
+
static int usb_onboard_hub_probe(struct udevice *dev)
{
+ struct onboard_hub_data *data =
+ (struct onboard_hub_data *)dev_get_driver_data(dev);
struct onboard_hub *hub = dev_get_priv(dev);
int ret;
ret = device_get_supply_regulator(dev, "vdd-supply", &hub->vdd);
- if (ret) {
+ if (ret && ret != -ENOENT) {
dev_err(dev, "can't get vdd-supply: %d\n", ret);
return ret;
}
- ret = regulator_set_enable_if_allowed(hub->vdd, true);
+ if (hub->vdd) {
+ ret = regulator_set_enable_if_allowed(hub->vdd, true);
+ if (ret && ret != -ENOSYS) {
+ dev_err(dev, "can't enable vdd-supply: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = usb_onboard_hub_reset(dev);
if (ret)
- dev_err(dev, "can't enable vdd-supply: %d\n", ret);
+ return ret;
+ if (data->init) {
+ ret = data->init(dev);
+ if (ret) {
+ dev_err(dev, "onboard i2c init failed: %d\n", ret);
+ goto err;
+ }
+ }
+ return 0;
+err:
+ dm_gpio_set_value(hub->reset_gpio, 0);
return ret;
}
+static int usb_onboard_hub_bind(struct udevice *dev)
+{
+ struct ofnode_phandle_args phandle;
+ const void *fdt = gd->fdt_blob;
+ int ret, off;
+
+ ret = dev_read_phandle_with_args(dev, "peer-hub", NULL, 0, 0, &phandle);
+ if (ret) {
+ dev_err(dev, "peer-hub not specified\n");
+ return ret;
+ }
+
+ off = ofnode_to_offset(phandle.node);
+ ret = fdt_node_check_compatible(fdt, off, "usb424,5744");
+ if (!ret)
+ return 0;
+
+ return -ENODEV;
+}
+
static int usb_onboard_hub_remove(struct udevice *dev)
{
struct onboard_hub *hub = dev_get_priv(dev);
int ret;
+ if (hub->reset_gpio)
+ dm_gpio_free(hub->reset_gpio->dev, hub->reset_gpio);
+
ret = regulator_set_enable_if_allowed(hub->vdd, false);
if (ret)
dev_err(dev, "can't disable vdd-supply: %d\n", ret);
@@ -45,15 +211,34 @@
return ret;
}
+static const struct onboard_hub_data usb2514_data = {
+ .power_on_delay_us = 500,
+ .reset_us = 1,
+};
+
+static const struct onboard_hub_data usb5744_data = {
+ .init = usb5744_i2c_init,
+ .power_on_delay_us = 1000,
+ .reset_us = 5,
+};
+
static const struct udevice_id usb_onboard_hub_ids[] = {
/* Use generic usbVID,PID dt-bindings (usb-device.yaml) */
- { .compatible = "usb424,2514" }, /* USB2514B USB 2.0 */
- { }
+ { .compatible = "usb424,2514", /* USB2514B USB 2.0 */
+ .data = (ulong)&usb2514_data,
+ }, {
+ .compatible = "usb424,2744", /* USB2744 USB 2.0 */
+ .data = (ulong)&usb5744_data,
+ }, {
+ .compatible = "usb424,5744", /* USB5744 USB 3.0 */
+ .data = (ulong)&usb5744_data,
+ }
};
U_BOOT_DRIVER(usb_onboard_hub) = {
.name = "usb_onboard_hub",
.id = UCLASS_USB_HUB,
+ .bind = usb_onboard_hub_bind,
.probe = usb_onboard_hub_probe,
.remove = usb_onboard_hub_remove,
.of_match = usb_onboard_hub_ids,
diff --git a/configs/am62px_evm_r5_defconfig b/configs/am62px_evm_r5_defconfig
index a93c33c..a0eaa12 100644
--- a/configs/am62px_evm_r5_defconfig
+++ b/configs/am62px_evm_r5_defconfig
@@ -89,6 +89,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
+CONFIG_K3_QOS=y
CONFIG_K3_SEC_PROXY=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
diff --git a/configs/am62x_a53_android.config b/configs/am62x_a53_android.config
index adbe2b8..2aca51e 100644
--- a/configs/am62x_a53_android.config
+++ b/configs/am62x_a53_android.config
@@ -11,6 +11,7 @@
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
# Enable Android boot flow
CONFIG_BOOTMETH_ANDROID=y
+CONFIG_ANDROID_AB=y
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_MALLOC_LEN=0x08000000
CONFIG_AVB_VERIFY=y
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index cf7a211..b6df8b4 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -14,7 +14,7 @@
CONFIG_ENV_OFFSET=0x680000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board"
+CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am654-base-board"
CONFIG_DM_RESET=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
@@ -76,6 +76,7 @@
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_OVERLAY_LIST="ti/k3-am654-icssg2"
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
CONFIG_ENV_OVERWRITE=y
diff --git a/configs/am68_sk_r5_defconfig b/configs/am68_sk_r5_defconfig
index f4800ef..097bed6 100644
--- a/configs/am68_sk_r5_defconfig
+++ b/configs/am68_sk_r5_defconfig
@@ -5,10 +5,14 @@
CONFIG_SOC_K3_J721S2=y
CONFIG_TARGET_J721S2_R5_EVM=y
+CONFIG_ESM_K3=n
CONFIG_K3_AVS0=n
+CONFIG_ESM_PMIC=n
CONFIG_DM_REGULATOR_TPS65941=n
CONFIG_PMIC_TPS65941=n
+CONFIG_SPL_DM_REGULATOR_TPS6287X=y
+
CONFIG_DEFAULT_DEVICE_TREE="k3-am68-sk-r5-base-board"
CONFIG_SPL_OF_LIST="k3-am68-sk-r5-base-board"
CONFIG_OF_LIST="k3-am68-sk-r5-base-board"
diff --git a/configs/amd_versal2_mini_defconfig b/configs/amd_versal2_mini_defconfig
index ea22541..4c902e4 100644
--- a/configs/amd_versal2_mini_defconfig
+++ b/configs/amd_versal2_mini_defconfig
@@ -15,6 +15,7 @@
CONFIG_SYS_LOAD_ADDR=0xBBF80000
CONFIG_DEBUG_UART_BASE=0xf1920000
CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
diff --git a/configs/amd_versal2_mini_emmc_defconfig b/configs/amd_versal2_mini_emmc_defconfig
index 6d4b261..da3eebe 100644
--- a/configs/amd_versal2_mini_emmc_defconfig
+++ b/configs/amd_versal2_mini_emmc_defconfig
@@ -12,6 +12,7 @@
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_DEBUG_UART_BASE=0xf1920000
CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
# CONFIG_EXPERT is not set
diff --git a/configs/amd_versal2_mini_ospi_defconfig b/configs/amd_versal2_mini_ospi_defconfig
index 71bd667..d881cd4 100644
--- a/configs/amd_versal2_mini_ospi_defconfig
+++ b/configs/amd_versal2_mini_ospi_defconfig
@@ -15,6 +15,7 @@
CONFIG_SYS_LOAD_ADDR=0xBBF80000
CONFIG_DEBUG_UART_BASE=0xf1920000
CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
diff --git a/configs/amd_versal2_mini_qspi_defconfig b/configs/amd_versal2_mini_qspi_defconfig
index 3947604..eb63f06 100644
--- a/configs/amd_versal2_mini_qspi_defconfig
+++ b/configs/amd_versal2_mini_qspi_defconfig
@@ -15,6 +15,7 @@
CONFIG_SYS_LOAD_ADDR=0xBBF80000
CONFIG_DEBUG_UART_BASE=0xf1920000
CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig
index 08e6077..b4aebf3 100644
--- a/configs/amd_versal2_virt_defconfig
+++ b/configs/amd_versal2_virt_defconfig
@@ -130,6 +130,8 @@
CONFIG_CADENCE_OSPI_VERSAL=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
CONFIG_TPM2_TIS_SPI=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
@@ -151,3 +153,4 @@
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_BLK=y
CONFIG_TPM=y
+# CONFIG_OPTEE_LIB is not set
diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
index 71057f1..566f9f2 100644
--- a/configs/bcm947622_defconfig
+++ b/configs/bcm947622_defconfig
@@ -8,7 +8,7 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm947622"
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM47622"
@@ -16,6 +16,12 @@
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm94912_defconfig b/configs/bcm94912_defconfig
index 5b6de30..46bbfb6 100644
--- a/configs/bcm94912_defconfig
+++ b/configs/bcm94912_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm94912"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm94912"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM4912"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963146_defconfig b/configs/bcm963146_defconfig
index 5033b06..239a8a1 100644
--- a/configs/bcm963146_defconfig
+++ b/configs/bcm963146_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963146"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963146"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63146"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963158_defconfig b/configs/bcm963158_defconfig
index c3010d9..a6cfea6 100644
--- a/configs/bcm963158_defconfig
+++ b/configs/bcm963158_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963158"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63158"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
index 1409feb..95c9c8e 100644
--- a/configs/bcm963178_defconfig
+++ b/configs/bcm963178_defconfig
@@ -9,7 +9,7 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm963178"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63178"
@@ -17,6 +17,12 @@
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96756_defconfig b/configs/bcm96756_defconfig
index 96a9a31..bfd309c 100644
--- a/configs/bcm96756_defconfig
+++ b/configs/bcm96756_defconfig
@@ -9,7 +9,7 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96756"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6756"
@@ -17,6 +17,12 @@
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96813_defconfig b/configs/bcm96813_defconfig
index eadcb637..7f16523 100644
--- a/configs/bcm96813_defconfig
+++ b/configs/bcm96813_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96813"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96813"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6813"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig
index 6ffae45..342be0a 100644
--- a/configs/bcm96855_defconfig
+++ b/configs/bcm96855_defconfig
@@ -9,7 +9,7 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96855"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96855"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6855"
@@ -17,6 +17,12 @@
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96856_defconfig b/configs/bcm96856_defconfig
index f926b37..5f22186 100644
--- a/configs/bcm96856_defconfig
+++ b/configs/bcm96856_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96856"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96856"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6856"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96858_defconfig b/configs/bcm96858_defconfig
index cc6069f..682cb14 100644
--- a/configs/bcm96858_defconfig
+++ b/configs/bcm96858_defconfig
@@ -9,13 +9,19 @@
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96858"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96858"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6858"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96878_defconfig b/configs/bcm96878_defconfig
index 7d1cd6c..ad65187 100644
--- a/configs/bcm96878_defconfig
+++ b/configs/bcm96878_defconfig
@@ -9,7 +9,7 @@
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96878"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6878"
@@ -17,6 +17,12 @@
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/deneb_defconfig b/configs/capricorn_cxg3_defconfig
similarity index 88%
rename from configs/deneb_defconfig
rename to configs/capricorn_cxg3_defconfig
index 98841bb..2764455 100644
--- a/configs/deneb_defconfig
+++ b/configs/capricorn_cxg3_defconfig
@@ -10,10 +10,11 @@
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
+CONFIG_ENV_OFFSET=0x200000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8-deneb"
-CONFIG_TARGET_DENEB=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_TARGET_CAPRICORN=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
@@ -25,7 +26,7 @@
CONFIG_SYS_BOOTM_LEN=0x800000
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2000
+CONFIG_ENV_OFFSET_REDUND=0x202000
CONFIG_IDENT_STRING=" ##v01.06"
CONFIG_REMAKE_ELF=y
# CONFIG_EFI_LOADER is not set
@@ -55,9 +56,10 @@
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
@@ -112,10 +114,13 @@
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=5
CONFIG_MV88E61XX_PHY_PORTS=0x7
+CONFIG_DM_ETH_PHY=y
CONFIG_FEC_MXC_SHARE_MDIO=y
CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8=y
@@ -129,5 +134,7 @@
CONFIG_FSL_LPUART=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_SPL_WDT is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SIEMENS_PMIC=y
CONFIG_SPL_TINY_MEMSET=y
diff --git a/configs/dhsom.config b/configs/dhsom.config
index fc76632..380beda 100644
--- a/configs/dhsom.config
+++ b/configs/dhsom.config
@@ -49,6 +49,7 @@
CONFIG_CMD_WGET=y
CONFIG_CMD_XXD=y
CONFIG_CRC32_VERIFY=y
+CONFIG_ENV_CALLBACK_LIST_STATIC="dh_som_serial_number:dh_som_serial_number,SN:SN,"
CONFIG_HASH_VERIFY=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_SHA1SUM_VERIFY=y
diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig
index 323e2f5..1ba02e0 100644
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@@ -33,7 +33,6 @@
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)"
diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig
index e35ca16..9411567 100644
--- a/configs/dockstar_defconfig
+++ b/configs/dockstar_defconfig
@@ -33,7 +33,6 @@
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),-(root)"
diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
index 25e5be3..44e9b17 100644
--- a/configs/ds414_defconfig
+++ b/configs/ds414_defconfig
@@ -49,7 +49,6 @@
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TIME=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_ENV_OVERWRITE=y
diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig
index 5797c6c..c36196c 100644
--- a/configs/e850-96_defconfig
+++ b/configs/e850-96_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARM_SMCCC=y
CONFIG_ARCH_EXYNOS=y
CONFIG_TEXT_BASE=0xf8800000
CONFIG_SYS_MALLOC_LEN=0x81f000
@@ -9,6 +10,7 @@
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf8c00000
CONFIG_DEFAULT_DEVICE_TREE="exynos/exynos850-e850-96"
CONFIG_SYS_LOAD_ADDR=0x80000000
+# CONFIG_PSCI_RESET is not set
CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_AUTOBOOT is not set
# CONFIG_DISPLAY_CPUINFO is not set
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
deleted file mode 100644
index af9c7a4..0000000
--- a/configs/giedi_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8-giedi"
-CONFIG_TARGET_GIEDI=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x13e000
-CONFIG_SPL_TEXT_BASE=0x100000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x128000
-CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_SYS_LOAD_ADDR=0x80280000
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2000
-CONFIG_IDENT_STRING=" ##v01.07"
-CONFIG_REMAKE_ELF=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_AUTOBOOT_KEYED_CTRLC=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2073
-CONFIG_LOG=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_MAX_SIZE=0x1f000
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_MMC_ENV_PART=2
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="eth1"
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_SPL_CLK=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_MV88E61XX_SWITCH=y
-CONFIG_MV88E61XX_CPU_PORT=5
-CONFIG_MV88E61XX_PHY_PORTS=0x7
-CONFIG_FEC_MXC_SHARE_MDIO=y
-CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_SPL_WDT is not set
-CONFIG_SPL_TINY_MEMSET=y
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index af758fc..add4a24 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -35,7 +35,6 @@
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)"
diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig
index 0fab4c3..540b918 100644
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@@ -35,7 +35,6 @@
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)"
diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
index 9d195e1..6ee40e3 100644
--- a/configs/iconnect_defconfig
+++ b/configs/iconnect_defconfig
@@ -35,7 +35,6 @@
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x80000@0x0(uboot),0x20000@0x80000(uboot_env),-@0xa0000(rootfs)"
diff --git a/configs/imx8m_data_modul.config b/configs/imx8m_data_modul.config
new file mode 100644
index 0000000..2164c75
--- /dev/null
+++ b/configs/imx8m_data_modul.config
@@ -0,0 +1,221 @@
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_INPUT is not set
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+# CONFIG_SPL_DM_USB is not set
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_ARCH_IMX8M=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_ARM=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_BOOTCOMMAND="run dmo_update_env ; load ${devtype} ${devnum}:${devpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset"
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_BTRFS=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_LSBLK=y
+CONFIG_CMD_MBR=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_WGET=y
+CONFIG_CMD_XXD=y
+CONFIG_CONSOLE_MUX=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x30880000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_MTD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_DM_RTC=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_THERMAL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_OFFSET=0xFFFC0000
+CONFIG_ENV_OFFSET_REDUND=0xFFFC0000
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FEC_MXC=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_USDHC=y
+CONFIG_GPIO_HOG=y
+CONFIG_HASH_VERIFY=y
+CONFIG_HUSH_PARSER=y
+CONFIG_I2C_EEPROM=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_IMX_TMU=y
+CONFIG_IMX_WATCHDOG=y
+CONFIG_IPV6=y
+CONFIG_IP_DEFRAG=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_MII=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_SPEED_MODE_SET=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MTD=y
+CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
+CONFIG_MXC_GPIO=y
+CONFIG_MXC_SPI=y
+CONFIG_MXC_UART=y
+CONFIG_NETCONSOLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_PROT_TCP_SACK=y
+CONFIG_REGMAP=y
+CONFIG_RGMII=y
+CONFIG_RTC_M41T62=y
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_SPI=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPL=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SYSCON=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
+CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
+CONFIG_SYS_EEPROM_SIZE=16384
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SYS_PBSIZE=2081
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_TFTP_TSIZE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_FUNCTION_ACM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Data Modul"
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_HUB_USB251XB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_USE_PREBOOT=y
+CONFIG_VERSION_VARIABLE=y
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index 105fbfb..66cb133 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -1,242 +1,39 @@
+#include <configs/imx8m_data_modul.config>
+
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
-CONFIG_TEXT_BASE=0x40200000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0xFFFC0000
-CONFIG_IMX_CONFIG="board/data_modul/imx8mm_edm_sbc/imximage.cfg"
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
CONFIG_TARGET_IMX8MM_DATA_MODUL_EDM_SBC=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_DM_RESET=y
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
-CONFIG_SPL_STACK=0x920000
-CONFIG_SPL_TEXT_BASE=0x7E1000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x910000
-CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SYS_BOOTM_LEN=0x8000000
-CONFIG_SYS_LOAD_ADDR=0x60000000
-CONFIG_SPL=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_ENV_OFFSET_REDUND=0xFFFC0000
-CONFIG_IMX_BOOTAUX=y
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run dmo_update_env ; load ${devtype} ${devnum}:${devpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="run dmo_preboot"
-CONFIG_DEFAULT_FDT_FILE="imx8mm-data-modul-edm-sbc.dtb"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2074
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_LATE_INIT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
-CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
-CONFIG_SPL_I2C=y
-CONFIG_SPL_POWER=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="u-boot=> "
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_EXPORTENV is not set
-CONFIG_CMD_ERASEENV=y
-CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_SIZE=16384
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
-CONFIG_CMD_MD5SUM=y
-CONFIG_MD5SUM_VERIFY=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_SHA1SUM=y
-CONFIG_SHA1SUM_VERIFY=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_GPT_RENAME=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LSBLK=y
-CONFIG_CMD_MBR=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_BKOPS_ENABLE=y
-CONFIG_MMC_SPEED_MODE_SET=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_SDP=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_CAT=y
-CONFIG_CMD_XXD=y
-CONFIG_CMD_DHCP6=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_WGET=y
-CONFIG_CMD_PXE=y
-CONFIG_CMD_BOOTCOUNT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_GETTIME=y
-CONFIG_CMD_KASLRSEED=y
-CONFIG_CMD_SYSBOOT=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_PMIC=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_SMC=y
-CONFIG_HASH_VERIFY=y
-CONFIG_CMD_BTRFS=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_FS_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
-CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_PARTITION_TYPE_GUID=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=1
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NETCONSOLE=y
-CONFIG_IP_DEFRAG=y
-CONFIG_TFTP_TSIZE=y
-CONFIG_PROT_TCP_SACK=y
-CONFIG_IPV6=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
-CONFIG_SPL_CLK_COMPOSITE_CCF=y
-CONFIG_CLK_COMPOSITE_CCF=y
-CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_CI_UDC=y
CONFIG_CLK_IMX8MM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DFU_TFTP=y
-CONFIG_DFU_TIMEOUT=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_MTD=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x42800000
-CONFIG_FASTBOOT_BUF_SIZE=0x20000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_GPIO_HOG=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-# CONFIG_INPUT is not set
-CONFIG_USB_HUB_USB251XB=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_SPL_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_ES_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ANEG_TIMEOUT=20000
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8M=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8M_POWER_DOMAIN=y
-CONFIG_DM_PMIC=y
+CONFIG_CMD_PCI=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mm-data-modul-edm-sbc"
+CONFIG_DEFAULT_FDT_FILE="imx8mm-data-modul-edm-sbc.dtb"
CONFIG_DM_PMIC_BD71837=y
-CONFIG_SPL_DM_PMIC_BD71837=y
-CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_BD71837=y
+CONFIG_IMX_CONFIG="board/data_modul/imx8mm_edm_sbc/imximage.cfg"
+CONFIG_NVME_PCI=y
+CONFIG_PCI=y
+CONFIG_PCIE_DW_IMX=y
+CONFIG_PHY=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_IMX8M_PCIE=y
+CONFIG_PREBOOT="run dmo_preboot"
+CONFIG_SDP_LOADADDR=0x60000000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SPL_BSS_START_ADDR=0x910000
+CONFIG_SPL_MAX_SIZE=0x30000
+CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
+CONFIG_SPL_DM_PMIC_BD71837=y
CONFIG_SPL_DM_REGULATOR_BD71837=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_RNG=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_M41T62=y
-CONFIG_DM_SERIAL=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_SYSRESET=y
-CONFIG_SPL_SYSRESET=y
-CONFIG_SYSRESET_PSCI=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_TMU=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Data Modul"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_USB_FUNCTION_ACM=y
-CONFIG_IMX_WATCHDOG=y
+CONFIG_SPL_DM_USB=y
+CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
+CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_STACK=0x920000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
+CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x60000000
diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig
index f809d23..ea8109b 100644
--- a/configs/imx8mp_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mp_data_modul_edm_sbc_defconfig
@@ -1,271 +1,54 @@
+#include <configs/imx8m_data_modul.config>
+
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
-CONFIG_TEXT_BASE=0x40200000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SYS_MALLOC_F_LEN=0x18000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SF_DEFAULT_SPEED=50000000
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0xFFFC0000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mp-data-modul-edm-sbc"
CONFIG_TARGET_IMX8MP_DATA_MODUL_EDM_SBC=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_DM_RESET=y
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
-CONFIG_SPL_STACK=0x96fc00
-CONFIG_SPL_TEXT_BASE=0x920000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x96fc00
-CONFIG_SPL_BSS_MAX_SIZE=0x400
-CONFIG_SYS_BOOTM_LEN=0x8000000
-CONFIG_SYS_LOAD_ADDR=0x50000000
-CONFIG_SPL=y
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_DEBUG_UART_BASE=0x30880000
-CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_ENV_OFFSET_REDUND=0xFFFC0000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_IMX_BOOTAUX=y
-CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_DEBUG_UART=y
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run dmo_update_env ; load ${devtype} ${devnum}:${devpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset"
-CONFIG_USE_PREBOOT=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mp-data-modul-edm-sbc"
CONFIG_DEFAULT_FDT_FILE="imx8mp-data-modul-edm-sbc.dtb"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2081
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_LATE_INIT=y
-CONFIG_SPL_MAX_SIZE=0x25000
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_BOOTROM_SUPPORT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
-CONFIG_SPL_I2C=y
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_POWER=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x58000
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="u-boot=> "
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_EXPORTENV is not set
-CONFIG_CMD_ERASEENV=y
-CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_SIZE=16384
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
-CONFIG_CMD_MD5SUM=y
-CONFIG_MD5SUM_VERIFY=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_SHA1SUM=y
-CONFIG_SHA1SUM_VERIFY=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_GPT_RENAME=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_LSBLK=y
-CONFIG_CMD_MBR=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_BKOPS_ENABLE=y
-CONFIG_MMC_SPEED_MODE_SET=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_SDP=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_CAT=y
-CONFIG_CMD_XXD=y
-CONFIG_CMD_DHCP6=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_WGET=y
-CONFIG_CMD_PXE=y
-CONFIG_CMD_BOOTCOUNT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_GETTIME=y
-CONFIG_CMD_KASLRSEED=y
-CONFIG_CMD_SYSBOOT=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_PMIC=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_SMC=y
-CONFIG_HASH_VERIFY=y
-CONFIG_CMD_BTRFS=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_FS_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
-CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_PARTITION_TYPE_GUID=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_ENV_IS_NOWHERE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=1
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NETCONSOLE=y
-CONFIG_IP_DEFRAG=y
-CONFIG_TFTP_TSIZE=y
-CONFIG_PROT_TCP_SACK=y
-CONFIG_IPV6=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
-CONFIG_SPL_CLK_COMPOSITE_CCF=y
-CONFIG_CLK_COMPOSITE_CCF=y
-CONFIG_SPL_CLK_IMX8MP=y
-CONFIG_CLK_IMX8MP=y
-CONFIG_FSL_CAAM=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
CONFIG_IMX8M_DRAM_INLINE_ECC=y
-CONFIG_DFU_TFTP=y
-CONFIG_DFU_TIMEOUT=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_MTD=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x42800000
-CONFIG_FASTBOOT_BUF_SIZE=0x20000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_GPIO_HOG=y
-CONFIG_SPL_GPIO_HOG=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-# CONFIG_INPUT is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
-CONFIG_USB_HUB_USB251XB=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_SPL_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_SPL_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_ES_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SFDP_SUPPORT=y
-# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_PHY_ANEG_TIMEOUT=20000
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
+CONFIG_PHY_IMX8MQ_USB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_DWC_ETH_QOS=y
-CONFIG_DWC_ETH_QOS_IMX=y
-CONFIG_FEC_MXC=y
-CONFIG_RGMII=y
-CONFIG_MII=y
-CONFIG_PHY_IMX8MQ_USB=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8M=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8M_POWER_DOMAIN=y
-CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SPL_BSS_START_ADDR=0x96fc00
+CONFIG_SPL_CLK_IMX8MP=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
CONFIG_SPL_DM_PMIC_PCA9450=y
-CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PCA9450=y
CONFIG_SPL_DM_REGULATOR_PCA9450=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_RNG=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_M41T62=y
-CONFIG_DM_SERIAL=y
-CONFIG_MXC_UART=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_SYSRESET=y
-CONFIG_SPL_SYSRESET=y
-CONFIG_SYSRESET_PSCI=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_TMU=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_DM_USB_GADGET=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
-CONFIG_USB_EHCI_HCD=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_SPL_MAX_SIZE=0x25000
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_STACK=0x96fc00
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SPL_TEXT_BASE=0x920000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x58000
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Data Modul"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_FUNCTION_ACM=y
CONFIG_USB_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETH_CDC=y
-CONFIG_IMX_WATCHDOG=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_XHCI_HCD=y
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx91_11x11_evk_defconfig
similarity index 63%
copy from configs/imx93-phyboard-segin_defconfig
copy to configs/imx91_11x11_evk_defconfig
index 309262c..6ee0b44 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx91_11x11_evk_defconfig
@@ -2,30 +2,30 @@
CONFIG_ARCH_IMX9=y
CONFIG_TEXT_BASE=0x80200000
CONFIG_SYS_MALLOC_LEN=0x2000000
-CONFIG_SYS_MALLOC_F_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SOURCE_FILE="phycore_imx93"
-CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SOURCE_FILE="imx91_evk"
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin"
-CONFIG_AHAB_BOOT=y
-CONFIG_TARGET_PHYCORE_IMX93=y
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx91-11x11-evk"
+CONFIG_TARGET_IMX91_11X11_EVK=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x20519dd0
-CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_SPL_STACK=0x204E0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0x204A0000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051a000
+CONFIG_SPL_BSS_START_ADDR=0x20498000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x720000
CONFIG_CMD_DEKBLOB=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SYS_MEMTEST_START=0x80000000
@@ -33,10 +33,10 @@
CONFIG_REMAKE_ELF=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
-CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_DEFAULT_FDT_FILE="imx91-11x11-evk.dtb"
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
+CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BOARD_INIT=y
@@ -44,30 +44,27 @@
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_CMD_CPU=y
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_SIZE=4096
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_USB=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
@@ -83,40 +80,42 @@
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth1"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
-CONFIG_SPL_CLK_IMX93=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_ADC=y
+CONFIG_ADC_IMX93=y
CONFIG_CLK_IMX93=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82800000
-CONFIG_FASTBOOT_BUF_SIZE=0x20000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_GPIO_HOG=y
+CONFIG_CPU=y
+CONFIG_CPU_IMX=y
+CONFIG_SAVED_DRAM_TIMING_BASE=0x2049C000
CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_ADP5585_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
-CONFIG_PHY_TI_GENERIC=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
-CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
@@ -130,22 +129,17 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_SYSRESET=y
-CONFIG_SPL_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_TMU=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
-CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
-CONFIG_CI_UDC=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_SYSRESET_PSCI=y
CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_SHA384=y
CONFIG_LZO=y
CONFIG_BZIP2=y
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx91_11x11_evk_inline_ecc_defconfig
similarity index 63%
copy from configs/imx93-phyboard-segin_defconfig
copy to configs/imx91_11x11_evk_inline_ecc_defconfig
index 309262c..761a666 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx91_11x11_evk_inline_ecc_defconfig
@@ -2,30 +2,30 @@
CONFIG_ARCH_IMX9=y
CONFIG_TEXT_BASE=0x80200000
CONFIG_SYS_MALLOC_LEN=0x2000000
-CONFIG_SYS_MALLOC_F_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
-CONFIG_ENV_SOURCE_FILE="phycore_imx93"
-CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SOURCE_FILE="imx91_evk"
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin"
-CONFIG_AHAB_BOOT=y
-CONFIG_TARGET_PHYCORE_IMX93=y
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx91-11x11-evk"
+CONFIG_TARGET_IMX91_11X11_EVK=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x20519dd0
-CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_SPL_STACK=0x204E0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0x204A0000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x2051a000
+CONFIG_SPL_BSS_START_ADDR=0x20498000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x720000
CONFIG_CMD_DEKBLOB=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SYS_MEMTEST_START=0x80000000
@@ -33,10 +33,10 @@
CONFIG_REMAKE_ELF=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
-CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_DEFAULT_FDT_FILE="imx91-11x11-evk.dtb"
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
+CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BOARD_INIT=y
@@ -44,30 +44,27 @@
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_CMD_CPU=y
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_SIZE=4096
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_USB=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
@@ -83,40 +80,43 @@
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth1"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
-CONFIG_SPL_CLK_IMX93=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_ADC=y
+CONFIG_ADC_IMX93=y
CONFIG_CLK_IMX93=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82800000
-CONFIG_FASTBOOT_BUF_SIZE=0x20000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_GPIO_HOG=y
+CONFIG_CPU=y
+CONFIG_CPU_IMX=y
+CONFIG_SAVED_DRAM_TIMING_BASE=0x2049C000
+CONFIG_IMX9_DRAM_INLINE_ECC=y
CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_ADP5585_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
-CONFIG_PHY_TI_GENERIC=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
-CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
@@ -130,22 +130,17 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_SYSRESET=y
-CONFIG_SPL_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_TMU=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
-CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
-CONFIG_CI_UDC=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_SYSRESET_PSCI=y
CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_SHA384=y
CONFIG_LZO=y
CONFIG_BZIP2=y
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phycore_defconfig
similarity index 97%
rename from configs/imx93-phyboard-segin_defconfig
rename to configs/imx93-phycore_defconfig
index 309262c..cf98001 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx93-phycore_defconfig
@@ -6,6 +6,7 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
+CONFIG_PHYTEC_SOM_DETECTION=y
CONFIG_ENV_SOURCE_FILE="phycore_imx93"
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x700000
@@ -31,6 +32,7 @@
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_REMAKE_ELF=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index f036a6f..217759e 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -102,6 +102,7 @@
CONFIG_FS_LOADER=y
CONFIG_SPL_FS_LOADER=y
CONFIG_K3_AVS0=y
+# CONFIG_K3_OPP_LOW is not set
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPL_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig
index f4441d6..23ae991 100644
--- a/configs/j721s2_evm_r5_defconfig
+++ b/configs/j721s2_evm_r5_defconfig
@@ -111,7 +111,9 @@
CONFIG_K3_SEC_PROXY=y
CONFIG_FS_LOADER=y
CONFIG_SPL_FS_LOADER=y
+CONFIG_ESM_K3=y
CONFIG_K3_AVS0=y
+CONFIG_ESM_PMIC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_SPL_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
diff --git a/configs/j722s_evm_r5_defconfig b/configs/j722s_evm_r5_defconfig
index a3c13fe..0f7cd4b 100644
--- a/configs/j722s_evm_r5_defconfig
+++ b/configs/j722s_evm_r5_defconfig
@@ -89,6 +89,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
+CONFIG_K3_QOS=y
CONFIG_K3_SEC_PROXY=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
diff --git a/configs/j784s4_evm_r5_defconfig b/configs/j784s4_evm_r5_defconfig
index 3f1f66d..61a44bf 100644
--- a/configs/j784s4_evm_r5_defconfig
+++ b/configs/j784s4_evm_r5_defconfig
@@ -145,3 +145,7 @@
CONFIG_PANIC_HANG=y
CONFIG_LIB_RATIONAL=y
CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_K3_AVS0=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_TPS6287X=y
diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig
index de5357c..a078c5d 100644
--- a/configs/khadas-vim3_android_ab_defconfig
+++ b/configs/khadas-vim3_android_ab_defconfig
@@ -24,6 +24,12 @@
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTMETH_ANDROID=y
+# CONFIG_BOOTMETH_EXTLINUX is not set
+# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
+# CONFIG_BOOTMETH_EFILOADER is not set
+# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
+# CONFIG_BOOTMETH_VBE is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -35,7 +41,6 @@
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
# CONFIG_CMD_IMI is not set
-CONFIG_CMD_BCB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig
index a0d9c42..b77a44c 100644
--- a/configs/khadas-vim3_android_defconfig
+++ b/configs/khadas-vim3_android_defconfig
@@ -24,6 +24,12 @@
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTMETH_ANDROID=y
+# CONFIG_BOOTMETH_EXTLINUX is not set
+# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
+# CONFIG_BOOTMETH_EFILOADER is not set
+# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
+# CONFIG_BOOTMETH_VBE is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -34,7 +40,6 @@
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
# CONFIG_CMD_IMI is not set
-CONFIG_CMD_BCB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig
index 4d7b90f..43db610 100644
--- a/configs/khadas-vim3l_android_ab_defconfig
+++ b/configs/khadas-vim3l_android_ab_defconfig
@@ -24,6 +24,12 @@
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTMETH_ANDROID=y
+# CONFIG_BOOTMETH_EXTLINUX is not set
+# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
+# CONFIG_BOOTMETH_EFILOADER is not set
+# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
+# CONFIG_BOOTMETH_VBE is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -35,7 +41,6 @@
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
# CONFIG_CMD_IMI is not set
-CONFIG_CMD_BCB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/khadas-vim3l_android_defconfig b/configs/khadas-vim3l_android_defconfig
index 4ec2726..32d57a5 100644
--- a/configs/khadas-vim3l_android_defconfig
+++ b/configs/khadas-vim3l_android_defconfig
@@ -24,6 +24,12 @@
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTMETH_ANDROID=y
+# CONFIG_BOOTMETH_EXTLINUX is not set
+# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
+# CONFIG_BOOTMETH_EFILOADER is not set
+# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
+# CONFIG_BOOTMETH_VBE is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -34,7 +40,6 @@
CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
# CONFIG_CMD_IMI is not set
-CONFIG_CMD_BCB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index a9d595c..2e618d8 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -47,7 +47,6 @@
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_JFFS2=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index 783879d..ca70ee9 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -34,7 +34,6 @@
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)"
@@ -66,5 +65,3 @@
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_NAND=y
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index f671835..9a42c39 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -30,7 +30,6 @@
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)"
diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig
index c4235ee..ab93163 100644
--- a/configs/nsa325_defconfig
+++ b/configs/nsa325_defconfig
@@ -42,7 +42,6 @@
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
# CONFIG_CMD_BLOCK_CACHE is not set
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)"
@@ -73,6 +72,4 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_NAND=y
CONFIG_UBIFS_SILENCE_MSG=y
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 5e59efe..3f43368 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -11,6 +11,7 @@
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-phyboard-polis-rdk"
CONFIG_TARGET_PHYCORE_IMX8MM=y
+CONFIG_PHYTEC_SOM_DETECTION=y
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_SPL_MMC=y
@@ -30,8 +31,6 @@
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
CONFIG_DEFAULT_FDT_FILE="oftree"
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig
index 0b0cf17..551fd44 100644
--- a/configs/phycore_am62x_a53_defconfig
+++ b/configs/phycore_am62x_a53_defconfig
@@ -36,6 +36,9 @@
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTSTD_FULL=y
@@ -61,18 +64,22 @@
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
CONFIG_SPL_YMODEM_SUPPORT=y
+# CONFIG_CMD_BOOTEFI_HELLO is not set
+CONFIG_CMD_BOOTEFI_SELFTEST=y
+CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_DFU=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_RTC=y
CONFIG_CMD_SMC=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_MULTI_DTB_FIT=y
CONFIG_OF_OVERLAY_LIST="ti/k3-am6xx-phycore-disable-spi-nor ti/k3-am6xx-phycore-disable-rtc ti/k3-am6xx-phycore-disable-eth-phy ti/k3-am6xx-phycore-qspi-nor"
+CONFIG_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
CONFIG_ENV_OVERWRITE=y
@@ -91,6 +98,7 @@
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
CONFIG_DFU_RAM=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
@@ -107,6 +115,7 @@
CONFIG_SPL_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MTD=y
+CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
@@ -157,3 +166,4 @@
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SPL_DFU=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+# CONFIG_HEXDUMP is not set
diff --git a/configs/phycore_am64x_a53_defconfig b/configs/phycore_am64x_a53_defconfig
index ac9731d..bc45000 100644
--- a/configs/phycore_am64x_a53_defconfig
+++ b/configs/phycore_am64x_a53_defconfig
@@ -35,6 +35,8 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
CONFIG_BOOTSTD_FULL=y
@@ -65,7 +67,10 @@
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
CONFIG_SPL_YMODEM_SUPPORT=y
+# CONFIG_CMD_BOOTEFI_HELLO is not set
+CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_ASKENV=y
+CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -73,6 +78,7 @@
CONFIG_CMD_MTD=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_RTC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SMC=y
@@ -98,6 +104,7 @@
CONFIG_CLK_CCF=y
CONFIG_CLK_TI_SCI=y
CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
@@ -121,6 +128,7 @@
CONFIG_SPL_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MTD=y
+CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig
index 50103f3..50c9292 100644
--- a/configs/pogo_e02_defconfig
+++ b/configs/pogo_e02_defconfig
@@ -32,7 +32,6 @@
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)"
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
index fb8036a..03b4fd9 100644
--- a/configs/pogo_v4_defconfig
+++ b/configs/pogo_v4_defconfig
@@ -41,7 +41,6 @@
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
# CONFIG_CMD_BLOCK_CACHE is not set
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
@@ -73,6 +72,4 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_NAND=y
CONFIG_UBIFS_SILENCE_MSG=y
diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig
index 5ddc5ab..ba26924 100644
--- a/configs/qcm6490_defconfig
+++ b/configs/qcm6490_defconfig
@@ -19,3 +19,9 @@
CONFIG_REMAKE_ELF=y
CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2"
+
+# Enable capsule updates
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index ea0dd3e..cd94315 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -21,12 +21,14 @@
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_EEPROM=y
CONFIG_SYS_I2C_EEPROM_BUS=2
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
# CONFIG_CMD_BIND is not set
CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
@@ -34,6 +36,7 @@
CONFIG_CMD_USB=y
CONFIG_CMD_CAT=y
CONFIG_CMD_BMP=y
+CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_LOG=y
CONFIG_OF_LIVE=y
@@ -52,6 +55,9 @@
CONFIG_CLK_QCOM_SM8550=y
CONFIG_CLK_QCOM_SM8650=y
CONFIG_CLK_QCOM_SC7280=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SCSI=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
CONFIG_MSM_GPIO=y
CONFIG_QCOM_PMIC_GPIO=y
CONFIG_DM_I2C=y
@@ -77,10 +83,12 @@
CONFIG_DWC_ETH_QOS_QCOM=y
CONFIG_RGMII=y
CONFIG_PHY=y
+CONFIG_PHY_QCOM_QMP_UFS=y
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_SNPS_EUSB2=y
CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
CONFIG_PINCTRL_QCOM_APQ8016=y
CONFIG_PINCTRL_QCOM_APQ8096=y
CONFIG_PINCTRL_QCOM_QCM2290=y
@@ -114,10 +122,10 @@
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
CONFIG_UFS=y
+CONFIG_QCOM_UFS=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_FONT_8X16 is not set
CONFIG_VIDEO_FONT_16X32=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_NO_FB_CLEAR=y
CONFIG_VIDEO_SIMPLE=y
-CONFIG_HEXDUMP=y
diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index 8dffb91..06ac6fe 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -3,7 +3,6 @@
CONFIG_ARCH_QEMU=y
CONFIG_SYS_MALLOC_LEN=0x1000000
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_SECT_SIZE=0x40000
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
index cc4f454..e164407 100644
--- a/configs/qemu_arm_defconfig
+++ b/configs/qemu_arm_defconfig
@@ -3,7 +3,6 @@
CONFIG_ARCH_QEMU=y
CONFIG_SYS_MALLOC_LEN=0x1000000
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_SECT_SIZE=0x40000
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 718e4a8..af56571 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -50,7 +50,9 @@
CONFIG_LOGF_FUNC=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_STACKPROTECTOR=y
+CONFIG_ANDROID_AB=y
CONFIG_CMD_CPU=y
+CONFIG_CMD_UFETCH=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_SMBIOS=y
CONFIG_CMD_BOOTM_PRE_LOAD=y
diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig
index 9ac40b9..a7f6c73 100644
--- a/configs/sheevaplug_defconfig
+++ b/configs/sheevaplug_defconfig
@@ -16,16 +16,14 @@
CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-sheevaplug"
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
+CONFIG_LTO=y
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_BOARD_SIZE_LIMIT=524288
+CONFIG_BOOTSTD_FULL=y
CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;"
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_BOOTZ=y
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
@@ -35,19 +33,10 @@
CONFIG_CMD_NAND=y
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
-CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
@@ -68,6 +57,5 @@
CONFIG_RTC_MV=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_BZIP2=y
diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
index 058e5fa..4fed7ed 100644
--- a/configs/sifive_unmatched_defconfig
+++ b/configs/sifive_unmatched_defconfig
@@ -42,6 +42,7 @@
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_CMD_ERASEENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_PWM=y
@@ -58,6 +59,7 @@
CONFIG_SPI_FLASH_ISSI=y
CONFIG_E1000=y
CONFIG_NVME_PCI=y
+CONFIG_PCI_REGION_MULTI_ENTRY=y
CONFIG_PCIE_DW_SIFIVE=y
CONFIG_SCSI=y
CONFIG_USB=y
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index 1c70d1d..20f89ae 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -32,6 +32,7 @@
CONFIG_RISCV_SMODE=y
# CONFIG_OF_BOARD_FIXUP is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
CONFIG_FIT=y
CONFIG_BOOTSTD_DEFAULTS=y
CONFIG_BOOTSTAGE=y
diff --git a/configs/x240_defconfig b/configs/x240_defconfig
index f930d28..ff64916 100644
--- a/configs/x240_defconfig
+++ b/configs/x240_defconfig
@@ -27,16 +27,12 @@
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_IPV6=y
CONFIG_CLK=y
CONFIG_CLK_MVEBU=y
CONFIG_GPIO_HOG=y
@@ -74,7 +70,6 @@
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
@@ -83,3 +78,4 @@
CONFIG_USB_ETHER_SMSC95XX=y
# CONFIG_FAT_WRITE is not set
# CONFIG_SMBIOS is not set
+# CONFIG_TOOLS_MKEFICAPSULE is not set
diff --git a/configs/x250_defconfig b/configs/x250_defconfig
new file mode 100644
index 0000000..dffe85b
--- /dev/null
+++ b/configs/x250_defconfig
@@ -0,0 +1,104 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_TEXT_BASE=0x00000000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
+CONFIG_TARGET_X250=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xf80000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="cn9130-atl-x250"
+CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_DEBUG_UART_BASE=0xf0512000
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd"
+CONFIG_USE_PREBOOT=y
+CONFIG_SPL_SILENT_CONSOLE=y
+CONFIG_TPL_SILENT_CONSOLE=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_UBI=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ARP_TIMEOUT=200
+CONFIG_NET_RETRY_COUNT=50
+CONFIG_IPV6=y
+CONFIG_SYS_64BIT_LBA=y
+CONFIG_GPIO_HOG=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_INPUT is not set
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+# CONFIG_MMC is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_MVPP2=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_MVEBU=y
+CONFIG_PHY=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_RTC_MAX313XX=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+# CONFIG_TOOLS_MKEFICAPSULE is not set
diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index 89612be..815370c 100644
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -65,6 +65,7 @@
CONFIG_ENV_OVERWRITE=y
CONFIG_ARP_TIMEOUT=200
CONFIG_NET_RETRY_COUNT=50
+CONFIG_IPV6=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
@@ -95,3 +96,4 @@
CONFIG_WDT=y
CONFIG_WDT_ORION=y
CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_TOOLS_MKEFICAPSULE is not set
diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig
index 7388a78..ac3815b 100644
--- a/configs/xilinx_versal_mini_defconfig
+++ b/configs/xilinx_versal_mini_defconfig
@@ -12,6 +12,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-mini"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_SYS_MEMTEST_START=0x00000000
diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig
index a36e40d..21f241e 100644
--- a/configs/xilinx_versal_mini_emmc0_defconfig
+++ b/configs/xilinx_versal_mini_emmc0_defconfig
@@ -12,6 +12,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
CONFIG_REMAKE_ELF=y
diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig
index 3ae2115..6cb654c 100644
--- a/configs/xilinx_versal_mini_emmc1_defconfig
+++ b/configs/xilinx_versal_mini_emmc1_defconfig
@@ -12,6 +12,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
CONFIG_REMAKE_ELF=y
diff --git a/configs/xilinx_versal_mini_ospi_defconfig b/configs/xilinx_versal_mini_ospi_defconfig
index d0ea2b6..c2a5624 100644
--- a/configs/xilinx_versal_mini_ospi_defconfig
+++ b/configs/xilinx_versal_mini_ospi_defconfig
@@ -13,6 +13,7 @@
# CONFIG_DM_GPIO is not set
CONFIG_DEFAULT_DEVICE_TREE="versal-mini-ospi-single"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_VERSAL_NO_DDR=y
# CONFIG_PSCI_RESET is not set
diff --git a/configs/xilinx_versal_mini_qspi_defconfig b/configs/xilinx_versal_mini_qspi_defconfig
index ef6eec0..4d23b35 100644
--- a/configs/xilinx_versal_mini_qspi_defconfig
+++ b/configs/xilinx_versal_mini_qspi_defconfig
@@ -11,6 +11,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_VERSAL_NO_DDR=y
# CONFIG_PSCI_RESET is not set
diff --git a/configs/xilinx_versal_net_mini_defconfig b/configs/xilinx_versal_net_mini_defconfig
index 1640dfa..e489f70 100644
--- a/configs/xilinx_versal_net_mini_defconfig
+++ b/configs/xilinx_versal_net_mini_defconfig
@@ -14,6 +14,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini"
CONFIG_SYS_LOAD_ADDR=0xBBF00000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_SYS_MEMTEST_START=0x00000000
diff --git a/configs/xilinx_versal_net_mini_emmc_defconfig b/configs/xilinx_versal_net_mini_emmc_defconfig
index 4c6159a..ab20156 100644
--- a/configs/xilinx_versal_net_mini_emmc_defconfig
+++ b/configs/xilinx_versal_net_mini_emmc_defconfig
@@ -10,6 +10,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-emmc"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
CONFIG_REMAKE_ELF=y
diff --git a/configs/xilinx_versal_net_mini_ospi_defconfig b/configs/xilinx_versal_net_mini_ospi_defconfig
index 071eeb8..f5864b5 100644
--- a/configs/xilinx_versal_net_mini_ospi_defconfig
+++ b/configs/xilinx_versal_net_mini_ospi_defconfig
@@ -13,6 +13,7 @@
# CONFIG_DM_GPIO is not set
CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-ospi-single"
CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_LTO=y
diff --git a/configs/xilinx_versal_net_mini_qspi_defconfig b/configs/xilinx_versal_net_mini_qspi_defconfig
index 227c45d..8453be5 100644
--- a/configs/xilinx_versal_net_mini_qspi_defconfig
+++ b/configs/xilinx_versal_net_mini_qspi_defconfig
@@ -11,6 +11,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-qspi-single"
CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
# CONFIG_PSCI_RESET is not set
CONFIG_LTO=y
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index a9320de..30d79ab 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -133,6 +133,7 @@
CONFIG_CADENCE_OSPI_VERSAL=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
CONFIG_TPM2_TIS_SPI=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index f220cc0..c8f166c 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -4,6 +4,7 @@
CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
CONFIG_ARCH_VERSAL=y
CONFIG_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_LEN=0x4000000
CONFIG_SYS_MALLOC_F_LEN=0x100000
CONFIG_NR_DRAM_BANKS=36
CONFIG_SF_DEFAULT_SPEED=30000000
@@ -18,6 +19,10 @@
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_REMAKE_ELF=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_ON_DISK_EARLY=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_EFI_HTTP_BOOT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -76,6 +81,7 @@
CONFIG_SIMPLE_PM_BUS=y
CONFIG_CLK_VERSAL=y
CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
CONFIG_ARM_FFA_TRANSPORT=y
@@ -99,11 +105,14 @@
CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -136,6 +145,9 @@
CONFIG_CADENCE_OSPI_VERSAL=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
CONFIG_TPM2_TIS_SPI=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index e00b386..ed3d101 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -146,6 +146,7 @@
CONFIG_ZYNQ_SERIAL=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQ_QSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ULPI_VIEWPORT=y
diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig
index 5757a0c..8fb66f7 100644
--- a/configs/xilinx_zynqmp_kria_defconfig
+++ b/configs/xilinx_zynqmp_kria_defconfig
@@ -47,6 +47,7 @@
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_BINMAN_SYMBOLS is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_FS_LOAD_KERNEL_NAME=""
CONFIG_SPL_FS_LOAD_ARGS_NAME=""
@@ -187,7 +188,6 @@
CONFIG_PWM_CADENCE_TTC=y
CONFIG_RESET_ZYNQMP=y
CONFIG_DM_RTC=y
-CONFIG_RTC_EMULATION=y
CONFIG_RTC_ZYNQMP=y
CONFIG_SCSI=y
CONFIG_ARM_DCC=y
@@ -208,6 +208,7 @@
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
+CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
@@ -224,6 +225,8 @@
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_BLK=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-som.dtb"
CONFIG_PANIC_HANG=y
CONFIG_TPM=y
CONFIG_SPL_GZIP=y
diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig
index 7aab69c..396c876 100644
--- a/configs/xilinx_zynqmp_mini_defconfig
+++ b/configs/xilinx_zynqmp_mini_defconfig
@@ -9,6 +9,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
@@ -59,6 +60,8 @@
# CONFIG_DM_MAILBOX is not set
# CONFIG_MMC is not set
CONFIG_ARM_DCC=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig
index c56b1e83..c19f79f 100644
--- a/configs/xilinx_zynqmp_mini_emmc0_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig
@@ -15,6 +15,7 @@
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SPL=y
+CONFIG_XILINX_MINI=y
CONFIG_REMAKE_ELF=y
# CONFIG_MP is not set
# CONFIG_EFI_LOADER is not set
@@ -28,6 +29,7 @@
# CONFIG_BOARD_LATE_INIT is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_BINMAN_SYMBOLS is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
@@ -73,6 +75,8 @@
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig
index a8dbf00..459e029 100644
--- a/configs/xilinx_zynqmp_mini_emmc1_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig
@@ -15,6 +15,7 @@
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SPL=y
+CONFIG_XILINX_MINI=y
CONFIG_REMAKE_ELF=y
# CONFIG_MP is not set
# CONFIG_EFI_LOADER is not set
@@ -28,6 +29,7 @@
# CONFIG_BOARD_LATE_INIT is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_BINMAN_SYMBOLS is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
@@ -73,6 +75,8 @@
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig
index ba8f02c..0a5cfd8 100644
--- a/configs/xilinx_zynqmp_mini_nand_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_defconfig
@@ -10,6 +10,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_REMAKE_ELF=y
# CONFIG_MP is not set
# CONFIG_EFI_LOADER is not set
@@ -59,6 +60,8 @@
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_MAX_CHIPS=2
CONFIG_ARM_DCC=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig
index a8a0055..4c399fd 100644
--- a/configs/xilinx_zynqmp_mini_nand_single_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig
@@ -10,6 +10,7 @@
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_XILINX_MINI=y
CONFIG_REMAKE_ELF=y
# CONFIG_MP is not set
# CONFIG_EFI_LOADER is not set
@@ -58,6 +59,8 @@
CONFIG_NAND_ARASAN=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_ARM_DCC=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig
index c08b10c..9d78541 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -15,6 +15,7 @@
CONFIG_SPL=y
# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
+CONFIG_XILINX_MINI=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_NO_DDR=y
# CONFIG_PSCI_RESET is not set
@@ -31,6 +32,7 @@
# CONFIG_BOARD_LATE_INIT is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_BINMAN_SYMBOLS is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
@@ -91,6 +93,8 @@
CONFIG_ARM_DCC=y
CONFIG_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman-mini.dtb"
CONFIG_PANIC_HANG=y
# CONFIG_GZIP is not set
# CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index f3d83a2..09f487a 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -41,6 +41,7 @@
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_BINMAN_SYMBOLS is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
@@ -210,6 +211,7 @@
CONFIG_SPI=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SPI_STACKED_PARALLEL=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_CMD_POWEROFF=y
CONFIG_SYSRESET_PSCI=y
@@ -240,6 +242,8 @@
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_BLK=y
+# CONFIG_BINMAN_FDT is not set
+CONFIG_BINMAN_DTB="./arch/arm/dts/zynqmp-binman.dtb"
CONFIG_PANIC_HANG=y
CONFIG_TPM=y
CONFIG_SPL_GZIP=y
diff --git a/disk/part_efi.c b/disk/part_efi.c
index bdcfcba..932d058 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -292,6 +292,7 @@
print_efiname(&gpt_pte[part - 1]));
strcpy((char *)info->type, "U-Boot");
info->bootable = get_bootable(&gpt_pte[part - 1]);
+ info->type_flags = gpt_pte[part - 1].attributes.fields.type_guid_specific;
if (CONFIG_IS_ENABLED(PARTITION_UUIDS)) {
uuid_bin_to_str(gpt_pte[part - 1].unique_partition_guid.b,
(char *)disk_partition_uuid(info),
diff --git a/doc/README.TPL b/doc/README.TPL
deleted file mode 100644
index 95b466e..0000000
--- a/doc/README.TPL
+++ /dev/null
@@ -1,49 +0,0 @@
-Generic TPL framework
-=====================
-
-Overview
---------
-
-TPL---Third Program Loader.
-
-Due to the SPL on some boards(powerpc mpc85xx) has a size limit and cannot
-be compatible with all the external device(e.g. DDR). So add a tertiary
-program loader (TPL) to enable a loader stub loaded by the code from the
-SPL. It loads the final uboot image into DDR, then jump to it to begin
-execution. Now, only the powerpc mpc85xx has this requirement and will
-implemente it.
-
-Keep consistent with SPL, with this framework almost all source files for a
-board can be reused. No code duplication or symlinking is necessary anymore.
-
-How it works
-------------
-
-There has been a directory $(srctree)/spl which contains only a Makefile. The
-Makefile is shared by SPL and TPL.
-
-The object files are built separately for SPL/TPL and placed in the
-directory spl/tpl. The final binaries which are generated are
-u-boot-{spl|tpl}, u-boot-{spl|tpl}.bin and u-boot-{spl|tpl}.map.
-
-During the TPL build a variable named CONFIG_TPL_BUILD is exported in the
-make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD.
-
-The SPL options are shared by SPL and TPL, the board config file should
-determine which SPL options to choose based on whether CONFIG_TPL_BUILD
-is set. Source files can be compiled for TPL with options chosen in the
-board config file.
-
-TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with
-the pre-relocation properties: 'bootph-all' and 'bootph-pre-sram'
-(see doc/develop/spl.rst for details).
-
-For example:
-
-spl/Makefile:
-LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o
-
-CONFIG_SPL_LIBCOMMON_SUPPORT is defined in board config file:
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#endif
diff --git a/doc/README.kconfig b/doc/README.kconfig
deleted file mode 100644
index 808cf56..0000000
--- a/doc/README.kconfig
+++ /dev/null
@@ -1,151 +0,0 @@
-Kconfig in U-Boot
-=================
-
-This document describes the configuration infrastructure of U-Boot.
-
-The conventional configuration was replaced by Kconfig at v2014.10-rc1 release.
-
-
-Language Specification
-----------------------
-
-Kconfig originates in Linux Kernel.
-See the file "Documentation/kbuild/kconfig*.txt" in your Linux Kernel
-source directory for a basic specification of Kconfig.
-
-
-Difference from Linux's Kconfig
--------------------------------
-
-Here are some worth-mentioning configuration targets.
-
-- silentoldconfig
-
- This target updates .config, include/generated/autoconf.h and
- include/configs/* as in Linux. In U-Boot, it also does the following
- for the compatibility with the old configuration system:
-
- * create a symbolic link "arch/${ARCH}/include/asm/arch" pointing to
- the SoC/CPU specific header directory
- * create include/config.h
- * create include/autoconf.mk
- * create spl/include/autoconf.mk (SPL and TPL only)
- * create tpl/include/autoconf.mk (TPL only)
-
- If we could completely switch to Kconfig in a long run
- (i.e. remove all the include/configs/*.h), those additional processings
- above would be removed.
-
-- defconfig
-
- In U-Boot, "make defconfig" is a shorthand of "make sandbox_defconfig"
-
-- <board>_defconfig
-
- Now it works as in Linux.
- The prefixes such as "+S:" in *_defconfig are deprecated.
- You can simply remove the prefixes. Do not add them for new boards.
-
-- <board>_config
-
- This does not exist in Linux's Kconfig.
- "make <board>_config" works the same as "make <board>_defconfig".
- Prior to Kconfig, in U-Boot, "make <board>_config" was used for the
- configuration. It is still supported for backward compatibility, so
- we do not need to update the distro recipes.
-
-
-The other configuration targets work as in Linux Kernel.
-
-
-Migration steps to Kconfig
---------------------------
-
-Prior to Kconfig, the C preprocessor based board configuration had been used
-in U-Boot.
-
-Although Kconfig was introduced and some configs have been moved to Kconfig,
-many of configs are still defined in C header files. It will take a very
-long term to move all of them to Kconfig. In the interim, the two different
-configuration infrastructures should coexist.
-The configuration files are generated by both Kconfig and the old preprocessor
-based configuration as follows:
-
-Configuration files for use in C sources
- - include/generated/autoconf.h (generated by Kconfig for Normal)
- - include/configs/<board>.h (exists for all boards)
-
-Configuration file for use in makefiles
- - include/config/auto.conf (generated by Kconfig)
- - include/autoconf.mk (generated by the old config for Normal)
- - spl/include/autoconfig.mk (generated by the old config for SPL)
- - tpl/include/autoconfig.mk (generated by the old config for TPL)
-
-When adding a new CONFIG macro, it is highly recommended to add it to Kconfig
-rather than to a header file.
-
-
-Conversion from boards.cfg to Kconfig
--------------------------------------
-
-Prior to Kconfig, boards.cfg was a primary database that contained Arch, CPU,
-SoC, etc. of all the supported boards. It was deleted when switching to
-Kconfig. Each field of boards.cfg was converted as follows:
-
- Status -> "S:" entry of MAINTAINERS
- Arch -> CONFIG_SYS_ARCH defined by Kconfig
- CPU -> CONFIG_SYS_CPU defined by Kconfig
- SoC -> CONFIG_SYS_SOC defined by Kconfig
- Vendor -> CONFIG_SYS_VENDOR defined by Kconfig
- Board -> CONFIG_SYS_BOARD defined by Kconfig
- Target -> File name of defconfig (configs/<target>_defconfig)
- Maintainers -> "M:" entry of MAINTAINERS
-
-
-Tips to add/remove boards
--------------------------
-
-When adding a new board, the following steps are generally needed:
-
- [1] Add a header file include/configs/<target>.h
- [2] Make sure to define necessary CONFIG_SYS_* in Kconfig:
- Define CONFIG_SYS_CPU="cpu" to compile arch/<arch>/cpu/<cpu>
- Define CONFIG_SYS_SOC="soc" to compile arch/<arch>/cpu/<cpu>/<soc>
- Define CONFIG_SYS_VENDOR="vendor" to compile board/<vendor>/common/*
- and board/<vendor>/<board>/*
- Define CONFIG_SYS_BOARD="board" to compile board/<board>/*
- (or board/<vendor>/<board>/* if CONFIG_SYS_VENDOR is defined)
- Define CONFIG_SYS_CONFIG_NAME="target" to include
- include/configs/<target>.h
- [3] Add a new entry to the board select menu in Kconfig.
- The board select menu is located in arch/<arch>/Kconfig or
- arch/<arch>/*/Kconfig.
- [4] Add a MAINTAINERS file
- It is generally placed at board/<board>/MAINTAINERS or
- board/<vendor>/<board>/MAINTAINERS
- [5] Add configs/<target>_defconfig
-
-When removing an obsolete board, the following steps are generally needed:
-
- [1] Remove configs/<target>_defconfig
- [2] Remove include/configs/<target>.h if it is not used by any other boards
- [3] Remove board/<vendor>/<board>/* or board/<board>/* if it is not used
- by any other boards
- [4] Update MAINTAINERS if necessary
- [5] Remove the unused entry from the board select menu in Kconfig
- [6] Add an entry to doc/README.scrapyard
-
-
-TODO
-----
-
-- In the pre-Kconfig, a single board had multiple entries in the boards.cfg
- file with differences in the option fields. The corresponding defconfig
- files were auto-generated when switching to Kconfig. Now we have too many
- defconfig files compared with the number of the supported boards. It is
- recommended to have only one defconfig per board and allow users to select
- the config options.
-
-- Move the config macros in header files to Kconfig. When we move at least
- macros used in makefiles, we can drop include/autoconfig.mk, which makes
- the build scripts much simpler.
diff --git a/doc/board/nxp/imx91_11x11_evk.rst b/doc/board/nxp/imx91_11x11_evk.rst
new file mode 100644
index 0000000..3ec3d28
--- /dev/null
+++ b/doc/board/nxp/imx91_11x11_evk.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx91_11x11_EVK
+=======================
+
+U-Boot for the NXP i.MX91 11x11 EVK
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.10
+
+.. code-block:: bash
+
+ $ unset LDFLAGS
+ $ make PLAT=imx91 bl31
+ $ cp build/imx91/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+ $ chmod +x firmware-imx-8.21.bin
+ $ ./firmware-imx-8.21.bin
+ $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-1.3.0-17945fc.bin
+ $ chmod +x firmware-ele-imx-1.3.0-17945fc.bin
+ $ ./firmware-ele-imx-1.3.0-17945fc.bin
+ $ cp firmware-ele-imx-1.3.0-17945fc/mx91a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-poky-linux-
+ $ make imx91_11x11_evk_defconfig or imx91_11x11_evk_inline_ecc_defconfig
+ $ make
+
+- Inline ECC is to enable DDR ECC feature with imx91_11x11_evk_inline_ecc_defconfig
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+ $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst
index 734bab6..8ca4b56 100644
--- a/doc/board/nxp/index.rst
+++ b/doc/board/nxp/index.rst
@@ -12,6 +12,7 @@
imx8mq_evk
imx8qxp_mek
imx8ulp_evk
+ imx91_11x11_evk
imx93_9x9_qsb
imx93_11x11_evk
imxrt1020-evk
diff --git a/doc/board/phytec/imx93-phyboard-segin.rst b/doc/board/phytec/imx93-phycore.rst
similarity index 90%
rename from doc/board/phytec/imx93-phyboard-segin.rst
rename to doc/board/phytec/imx93-phycore.rst
index ce17fbe..bd110a3 100644
--- a/doc/board/phytec/imx93-phyboard-segin.rst
+++ b/doc/board/phytec/imx93-phycore.rst
@@ -1,9 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0+
-phyBOARD-Segin-i.MX93
-=====================
+phyCORE-i.MX 93
+===============
-U-Boot for the phyBOARD-Segin-i.MX93.
+U-Boot for the phyCORE-i.MX 93.
Quick Start
-----------
@@ -51,7 +51,7 @@
.. code-block:: bash
- $ make imx93-phyboard-segin_defconfig
+ $ make imx93-phycore_defconfig
$ make
Burn the flash.bin to MicroSD card offset 32KB:
diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
index 697aec3..1ae30c2 100644
--- a/doc/board/phytec/index.rst
+++ b/doc/board/phytec/index.rst
@@ -7,7 +7,7 @@
:maxdepth: 2
imx8mm-phygate-tauri-l
- imx93-phyboard-segin
+ imx93-phycore
phycore-am62x
phycore-am62ax
phycore-am64x
diff --git a/doc/build/docker.rst b/doc/build/docker.rst
index 45659b3..5896dd5 100644
--- a/doc/build/docker.rst
+++ b/doc/build/docker.rst
@@ -1,11 +1,30 @@
GitLab CI / U-Boot runner container
===================================
-In order to have a reproducible and portable build environment for CI we use a container for building in. This means that developers can also reproduce the CI environment, to a large degree at least, locally. This file is located in the tools/docker directory. To build the image yourself
+In order to have a reproducible and portable build environment for CI we use a container for building in. This means that developers can also reproduce the CI environment, to a large degree at least, locally. This file is located in the tools/docker directory.
+
+The docker image supports both amd64 and arm64. Ensure that the
+'docker-buildx' Debian package is installed (or the equivalent on another
+distribution).
+
+You will need a multi-platform container, otherwise this error is shown::
+
+ ERROR: Multi-platform build is not supported for the docker driver.
+ Switch to a different driver, or turn on the containerd image store, and try again.
+
+You can add one with::
+
+ sudo docker buildx create --name multiarch --driver docker-container --use
+
+Building is supported on both amd64 (i.e. 64-bit x86) and arm64 machines. While
+both amd64 and arm64 happen in parallel, the non-native part will take
+considerably longer as it must use QEMU to emulate the foreign code.
+
+To build the image yourself::
.. code-block:: bash
- sudo docker build -t your-namespace:your-tag .
+ sudo docker buildx build --platform linux/arm64/v8,linux/amd64 -t your-namespace:your-tag .
Or to use an existing container
diff --git a/doc/develop/environment.rst b/doc/develop/environment.rst
index e178346..e46cd39 100644
--- a/doc/develop/environment.rst
+++ b/doc/develop/environment.rst
@@ -18,8 +18,8 @@
U_BOOT_ENV_CALLBACK macro in your board or driver code.
These callbacks are associated with variables in one of two ways. The
-static list can be added to by defining CFG_ENV_CALLBACK_LIST_STATIC
-in the board configuration to a string that defines a list of
+static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC
+in the board defconfig via menuconfig to a string that defines a list of
associations. The list must be in the following format::
entry = variable_name[:callback_name]
diff --git a/doc/develop/index.rst b/doc/develop/index.rst
index 30f7fdb..d9f2a83 100644
--- a/doc/develop/index.rst
+++ b/doc/develop/index.rst
@@ -13,6 +13,7 @@
codingstyle
designprinciples
docstyle
+ kconfig
memory
patman
process
diff --git a/doc/develop/kconfig.rst b/doc/develop/kconfig.rst
new file mode 100644
index 0000000..227074d
--- /dev/null
+++ b/doc/develop/kconfig.rst
@@ -0,0 +1,157 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kconfig in U-Boot
+=================
+
+This document describes the configuration infrastructure of U-Boot.
+
+The conventional configuration was replaced by Kconfig at v2014.10-rc1 release.
+
+Language Specification
+----------------------
+
+The Kconfig configuration language originates in Linux kernel.
+See the Linux document
+`Kconfig Language <https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html>`_
+for a description of Kconfig.
+
+Difference from Linux's Kconfig
+-------------------------------
+
+Here are some worth-mentioning configuration targets.
+
+silentoldconfig
+ This target updates .config, include/generated/autoconf.h and
+ include/configs/* as in Linux. In U-Boot, it also does the following
+ for the compatibility with the old configuration system:
+
+ * create a symbolic link "arch/${ARCH}/include/asm/arch" pointing to
+ the SoC/CPU specific header directory
+ * create include/config.h
+ * create include/autoconf.mk
+ * create spl/include/autoconf.mk (SPL and TPL only)
+ * create tpl/include/autoconf.mk (TPL only)
+
+ If we could completely switch to Kconfig in a long run
+ (i.e. remove all the include/configs/\*.h), those additional processings
+ above would be removed.
+
+defconfig
+ In U-Boot, "make defconfig" is a shorthand of "make sandbox_defconfig"
+
+<board>_defconfig
+ Now it works as in Linux.
+ The prefixes such as "+S:" in \*_defconfig are deprecated.
+ You can simply remove the prefixes. Do not add them for new boards.
+
+<board>_config
+ This does not exist in Linux's Kconfig.
+ "make <board>_config" works the same as "make <board>_defconfig".
+ Prior to Kconfig, in U-Boot, "make <board>_config" was used for the
+ configuration. It is still supported for backward compatibility, so
+ we do not need to update the distro recipes.
+
+The other configuration targets work as in Linux Kernel.
+
+Migration steps to Kconfig
+--------------------------
+
+Prior to Kconfig, the C preprocessor based board configuration had been used
+in U-Boot.
+
+Although Kconfig was introduced and some configs have been moved to Kconfig,
+many of configs are still defined in C header files. It will take a very
+long term to move all of them to Kconfig. In the interim, the two different
+configuration infrastructures should coexist.
+The configuration files are generated by both Kconfig and the old preprocessor
+based configuration as follows:
+
+Configuration files for use in C sources
+ - include/generated/autoconf.h (generated by Kconfig for Normal)
+ - include/configs/<board>.h (exists for all boards)
+
+Configuration file for use in makefiles
+ - include/config/auto.conf (generated by Kconfig)
+ - include/autoconf.mk (generated by the old config for Normal)
+ - spl/include/autoconfig.mk (generated by the old config for SPL)
+ - tpl/include/autoconfig.mk (generated by the old config for TPL)
+
+When adding a new CONFIG macro, it is highly recommended to add it to Kconfig
+rather than to a header file.
+
+Conversion from boards.cfg to Kconfig
+-------------------------------------
+
+Prior to Kconfig, boards.cfg was a primary database that contained Arch, CPU,
+SoC, etc. of all the supported boards. It was deleted when switching to
+Kconfig. Each field of boards.cfg was converted as follows:
+
+=========== ====================================================
+From To
+=========== ====================================================
+Arch CONFIG_SYS_ARCH defined by Kconfig
+Board CONFIG_SYS_BOARD defined by Kconfig
+CPU CONFIG_SYS_CPU defined by Kconfig
+Maintainers "M:" entry of MAINTAINERS
+SoC CONFIG_SYS_SOC defined by Kconfig
+Status "S:" entry of MAINTAINERS
+Target File name of defconfig (configs/<target>\_defconfig)
+Vendor CONFIG_SYS_VENDOR defined by Kconfig
+=========== ====================================================
+
+Tips to add/remove boards
+-------------------------
+
+When adding a new board, the following steps are generally needed:
+
+1. Add a header file include/configs/<target>.h
+
+2. Make sure to define necessary CONFIG_SYS_* in Kconfig:
+
+ * Define CONFIG_SYS_CPU="cpu" to compile arch/<arch>/cpu/<cpu>
+ * Define CONFIG_SYS_SOC="soc" to compile arch/<arch>/cpu/<cpu>/<soc>
+ * Define CONFIG_SYS_VENDOR="vendor" to compile board/<vendor>/common/\*
+ and board/<vendor>/<board>/\*
+ * Define CONFIG_SYS_BOARD="board" to compile board/<board>/\*
+ (or board/<vendor>/<board>/* if CONFIG_SYS_VENDOR is defined)
+ Define CONFIG_SYS_CONFIG_NAME="target" to include
+ include/configs/<target>.h
+
+3. Add a new entry to the board select menu in Kconfig.
+ The board select menu is located in arch/<arch>/Kconfig or
+ arch/<arch>/\*/Kconfig.
+
+4. Add a MAINTAINERS file
+ It is generally placed at board/<board>/MAINTAINERS or
+ board/<vendor>/<board>/MAINTAINERS
+
+5. Add configs/<target>_defconfig
+
+When removing an obsolete board, the following steps are generally needed:
+
+1. Remove configs/<target>_defconfig
+
+2. Remove include/configs/<target>.h if it is not used by any other boards
+
+3. Remove board/<vendor>/<board>/\* or board/<board>/\* if it is not used
+ by any other boards
+
+4. Update MAINTAINERS if necessary
+
+5. Remove the unused entry from the board select menu in Kconfig
+
+6. Add an entry to doc/README.scrapyard
+
+TODO
+----
+
+* In the pre-Kconfig, a single board had multiple entries in the boards.cfg
+ file with differences in the option fields. The corresponding defconfig
+ files were auto-generated when switching to Kconfig. Now we have too many
+ defconfig files compared with the number of the supported boards. It is
+ recommended to have only one defconfig per board and allow users to select
+ the config options.
+
+* Move the config macros in header files to Kconfig. When we move at least
+ macros used in makefiles, we can drop include/autoconfig.mk, which makes
+ the build scripts much simpler.
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index 1548d26..9f9252b 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -71,9 +71,9 @@
* U-Boot v2025.01-rc2 was released on Mon 11 November 2024.
-.. * U-Boot v2025.01-rc3 was released on Mon 25 November 2024.
+* U-Boot v2025.01-rc3 was released on Mon 25 November 2024.
-.. * U-Boot v2025.01-rc4 was released on Mon 09 December 2024.
+* U-Boot v2025.01-rc4 was released on Mon 09 December 2024.
.. * U-Boot v2025.01-rc5 was released on Mon 23 December 2024.
diff --git a/doc/usage/cmd/wget.rst b/doc/usage/cmd/wget.rst
index b8ca35b..48bedf1 100644
--- a/doc/usage/cmd/wget.rst
+++ b/doc/usage/cmd/wget.rst
@@ -11,29 +11,54 @@
::
- wget address [[hostIPaddr:]path]
+ wget [address] [host:]path
+ wget [address] url # lwIP only
+
Description
-----------
+The wget command is used to download a file from an HTTP(S) server.
+In order to use HTTPS you will need to compile wget with lwIP support.
+
-The wget command is used to download a file from an HTTP server.
+Legacy syntax
+~~~~~~~~~~~~~
-wget command will use HTTP over TCP to download files from an HTTP server.
+The legacy syntax is supported by the legacy network stack (CONFIG_NET=y)
+as well as by the lwIP base network stack (CONFIG_NET_LWIP=y). It supports HTTP
+only.
+
By default the destination port is 80 and the source port is pseudo-random.
-The environment variable *httpdstp* can be used to set the destination port.
+On the legacy nework stack the environment variable *httpdstp* can be used to
+set the destination port
address
memory address for the data downloaded
-hostIPaddr
- IP address of the HTTP server, defaults to the value of environment
- variable *serverip*
+host
+ IP address (or host name if `CONFIG_CMD_DNS` is enabled) of the HTTP
+ server, defaults to the value of environment variable *serverip*.
path
path of the file to be downloaded.
+New syntax (lwIP only)
+~~~~~~~~~~~~~~~~~~~~~~
+
+In addition to the syntax described above, wget accepts URLs if the network
+stack is lwIP.
+
+address
+ memory address for the data downloaded
+
+url
+ HTTP or HTTPS URL, that is: http[s]://<host>[:<port>]/<path>.
+
+Examples
+--------
+
-Example
--------
+Example with the legacy network stack
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In the example the following steps are executed:
@@ -52,13 +77,42 @@
HTTP/1.0 302 Found
Packets received 4, Transfer Successful
+Example with lwIP
+~~~~~~~~~~~~~~~~~
+
+In the example the following steps are executed:
+
+* setup client network address
+* download a file from the HTTPS server
+
+::
+
+ => dhcp
+ DHCP client bound to address 10.0.2.15 (3 ms)
+ => wget https://download.rockylinux.org/pub/rocky/9/isos/aarch64/Rocky-9.4-aarch64-minimal.iso
+ ##########################################################################
+ ##########################################################################
+ ##########################################################################
+ [...]
+ 1694892032 bytes transferred in 492181 ms (3.3 MiB/s)
+ Bytes transferred = 1694892032 (65060000 hex)
+
Configuration
-------------
The command is only available if CONFIG_CMD_WGET=y.
+To enable lwIP support set CONFIG_NET_LWIP=y.
+
+TCP Selective Acknowledgments in the legacy network stack can be enabled via
+CONFIG_PROT_TCP_SACK=y. This will improve the download speed. Selective
+Acknowledgments are enabled by default with lwIP.
+
+.. note::
-TCP Selective Acknowledgments can be enabled via CONFIG_PROT_TCP_SACK=y.
-This will improve the download speed.
+ U-Boot currently has no way to verify certificates for HTTPS.
+ A place to store the root CA certificates is needed, and then MBed TLS would
+ need to walk the entire chain. Therefore, man-in-the middle attacks are
+ possible and HTTPS should not be relied upon for payload authentication.
Return value
------------
diff --git a/doc/usage/dfu.rst b/doc/usage/dfu.rst
index 8cc09c3..af80551 100644
--- a/doc/usage/dfu.rst
+++ b/doc/usage/dfu.rst
@@ -22,6 +22,7 @@
Today the supported DFU backends are:
- MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT)
+- SCSI (UFS, RAW partition, FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT)
- NAND
- RAM
- SF (serial flash)
@@ -51,6 +52,7 @@
* CONFIG_DFU_MTD
* CONFIG_DFU_NAND
* CONFIG_DFU_RAM
+* CONFIG_DFU_SCSI
* CONFIG_DFU_SF
* CONFIG_DFU_SF_PART
* CONFIG_DFU_TIMEOUT
@@ -167,6 +169,36 @@
Please note that this means the user will be able to execute any
arbitrary commands just like in the u-boot's shell.
+scsi
+ for UFS storage::
+
+ dfu 0 scsi <dev>
+
+ each element in *dfu_alt_info* being
+
+ * <name> raw <offset> <size> raw access to SCSI LUN
+ * <name> part <part_id> raw access to partition
+ * <name> fat <part_id> file in FAT partition
+ * <name> ext4 <part_id> file in EXT4 partition
+ * <name> skip 0 0 ignore flashed data
+ * <name> script 0 0 execute commands in shell
+
+ with
+
+ size
+ is the size of the access area (hexadecimal without "0x")
+ or 0 which means whole device
+ partid
+ is the GPT or DOS partition index.
+ dev
+ is the SCSI LU (Logical Unit) index (decimal only)
+
+ A value of environment variable *dfu_alt_info* for UFS could be::
+
+ u-boot part 4;bl2 raw 0x1e 0x1d
+
+ See mmc section above for details on the skip and script types.
+
nand
raw slc nand device::
@@ -278,6 +310,7 @@
mmc <dev>=<alt1>;....;<altN>
nand <dev>=<alt1>;....;<altN>
ram <dev>=<alt1>;....;<altN>
+ scsi <dev>=<alt1>;....;<altN>
sf <dev>=<alt1>;....;<altN>
mtd <dev>=<alt1>;....;<altN>
virt <dev>=<alt1>;....;<altN>
diff --git a/doc/usage/fit/howto.rst b/doc/usage/fit/howto.rst
index 280eff7..675c9aa 100644
--- a/doc/usage/fit/howto.rst
+++ b/doc/usage/fit/howto.rst
@@ -57,10 +57,6 @@
multiple /configurations subnodes. The required images must be enumerated in
the "loadables" property as a list of strings.
-CONFIG_SPL_FIT_GENERATOR can point to a script which generates this image source
-file during the build process. It gets passed a list of device tree files (taken
-from the CONFIG_OF_LIST symbol).
-
The SPL also records to a DT all additional images (called loadables) which are
loaded. The information about loadables locations is passed via the DT node with
fit-images name.
diff --git a/drivers/bios_emulator/biosemui.h b/drivers/bios_emulator/biosemui.h
index 954cd88..739a17c 100644
--- a/drivers/bios_emulator/biosemui.h
+++ b/drivers/bios_emulator/biosemui.h
@@ -128,6 +128,7 @@
u32 finalVal;
} BE_portInfo;
+#if defined(X86EMU_RAW_IO)
#define PM_inpb(port) inb(port)
#define PM_inpw(port) inw(port)
#define PM_inpd(port) inl(port)
@@ -135,6 +136,46 @@
#define PM_outpw(port, val) outw(val, port)
#define PM_outpd(port, val) outl(val, port)
+#else
+
+/*
+ * Until the emulator code is fixed, at least print warnings.
+ */
+
+static inline u8 PM_inpb(u16 port)
+{
+ printf("x86 port 0x%x read attempt, returning 0\n", port);
+ return 0;
+}
+
+static inline u16 PM_inpw(u16 port)
+{
+ printf("x86 port 0x%x read attempt, returning 0\n", port);
+ return 0;
+}
+
+static inline u32 PM_inpd(u16 port)
+{
+ printf("x86 port 0x%x read attempt, returning 0\n", port);
+ return 0;
+}
+
+static inline void PM_outpb(u16 port, u8 val)
+{
+ printf("x86 port 0x%x write attempt, ignoring\n", port);
+}
+
+static inline void PM_outpw(u16 port, u16 val)
+{
+ printf("x86 port 0x%x write attempt, ignoring\n", port);
+}
+
+static inline void PM_outpd(u16 port, u32 val)
+{
+ printf("x86 port 0x%x write attempt, ignoring\n", port);
+}
+#endif
+
#define LOG_inpb(port) PM_inpb(port)
#define LOG_inpw(port) PM_inpw(port)
#define LOG_inpd(port) PM_inpd(port)
diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c
index b426dc3..c63cf3d 100644
--- a/drivers/bios_emulator/x86emu/debug.c
+++ b/drivers/bios_emulator/x86emu/debug.c
@@ -38,6 +38,8 @@
****************************************************************************/
#include <stdarg.h>
+#include <string.h>
+#include <vsprintf.h>
#include <linux/ctype.h>
#include <linux/printk.h>
#include "x86emu/x86emui.h"
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index fa6d8e7..0080d2a 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -164,6 +164,13 @@
Accessing the backend is done using the regmap interface.
+config DM_BOOTCOUNT_ZYNQMP
+ bool "Support ZynqMP PMUFW as a backing store for bootcount"
+ depends on ARCH_ZYNQMP
+ help
+ Enable support for the bootcount API by utilising the Persistent
+ Global General Storage Register 2 of the PMU.
+
endmenu
endif
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 245f879..0cf79e4 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -16,3 +16,4 @@
obj-$(CONFIG_DM_BOOTCOUNT_I2C) += bootcount_dm_i2c.o
obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH) += spi-flash.o
obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
+obj-$(CONFIG_DM_BOOTCOUNT_ZYNQMP) += bootcount_zynqmp.o
diff --git a/drivers/bootcount/bootcount_zynqmp.c b/drivers/bootcount/bootcount_zynqmp.c
new file mode 100644
index 0000000..bc0984e
--- /dev/null
+++ b/drivers/bootcount/bootcount_zynqmp.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+// SPDX-FileCopyrightText: 2024 CERN (home.cern)
+
+#include <bootcount.h>
+#include <dm.h>
+#include <stdio.h>
+#include <zynqmp_firmware.h>
+#include <asm/arch/hardware.h>
+#include <dm/platdata.h>
+
+static int bootcount_zynqmp_set(struct udevice *dev, const u32 val)
+{
+ int ret;
+
+ ret = zynqmp_mmio_write((ulong)&pmu_base->pers_gen_storage2, 0xFF, val);
+ if (ret)
+ pr_info("%s write fail\n", __func__);
+
+ return ret;
+}
+
+static int bootcount_zynqmp_get(struct udevice *dev, u32 *val)
+{
+ int ret;
+
+ *val = 0;
+ ret = zynqmp_mmio_read((ulong)&pmu_base->pers_gen_storage2, val);
+ if (ret)
+ pr_info("%s read fail\n", __func__);
+
+ return ret;
+}
+
+U_BOOT_DRVINFO(bootcount_zynqmp) = {
+ .name = "bootcount_zynqmp",
+};
+
+static const struct bootcount_ops bootcount_zynqmp_ops = {
+ .get = bootcount_zynqmp_get,
+ .set = bootcount_zynqmp_set,
+};
+
+U_BOOT_DRIVER(bootcount_zynqmp) = {
+ .name = "bootcount_zynqmp",
+ .id = UCLASS_BOOTCOUNT,
+ .ops = &bootcount_zynqmp_ops,
+};
diff --git a/drivers/button/Kconfig b/drivers/button/Kconfig
index 3918b05..6cae16f 100644
--- a/drivers/button/Kconfig
+++ b/drivers/button/Kconfig
@@ -9,6 +9,17 @@
can provide access to board-specific buttons. Use of the device tree
for configuration is encouraged.
+config BUTTON_REMAP_PHONE_KEYS
+ bool "Remap phone keys for navigation"
+ depends on BUTTON
+ help
+ Enable remapping of phone keys to navigation keys. This is useful for
+ devices with phone keys that are not used in U-Boot. The phone keys
+ are remapped to the following navigation keys:
+ - Volume up: Up
+ - Volume down: Down
+ - Power: Enter
+
config BUTTON_ADC
bool "Button adc"
depends on BUTTON
diff --git a/drivers/button/button-gpio.c b/drivers/button/button-gpio.c
index 43b82d9..31b85c8 100644
--- a/drivers/button/button-gpio.c
+++ b/drivers/button/button-gpio.c
@@ -20,6 +20,9 @@
struct button_gpio_priv *priv = dev_get_priv(dev);
int ret;
+ if (!priv)
+ return -ENODATA;
+
if (!dm_gpio_is_valid(&priv->gpio))
return -EREMOTEIO;
ret = dm_gpio_get_value(&priv->gpio);
@@ -32,6 +35,8 @@
static int button_gpio_get_code(struct udevice *dev)
{
struct button_gpio_priv *priv = dev_get_priv(dev);
+ if (!priv)
+ return -ENODATA;
int code = priv->linux_code;
if (!code)
@@ -51,7 +56,7 @@
return 0;
ret = gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_IN);
- if (ret)
+ if (ret || !dm_gpio_is_valid(&priv->gpio))
return ret;
ret = dev_read_u32(dev, "linux,code", &priv->linux_code);
@@ -98,6 +103,8 @@
return ret;
uc_plat = dev_get_uclass_plat(dev);
uc_plat->label = label;
+ debug("Button '%s' bound to driver '%s'\n", label,
+ dev->driver->name);
}
return 0;
diff --git a/drivers/button/button-uclass.c b/drivers/button/button-uclass.c
index cda2433..729983d 100644
--- a/drivers/button/button-uclass.c
+++ b/drivers/button/button-uclass.c
@@ -10,6 +10,7 @@
#include <button.h>
#include <dm.h>
#include <dm/uclass-internal.h>
+#include <dt-bindings/input/linux-event-codes.h>
int button_get_by_label(const char *label, struct udevice **devp)
{
@@ -37,14 +38,33 @@
return ops->get_state(dev);
}
+static int button_remap_phone_keys(int code)
+{
+ switch (code) {
+ case KEY_VOLUMEUP:
+ return KEY_UP;
+ case KEY_VOLUMEDOWN:
+ return KEY_DOWN;
+ case KEY_POWER:
+ return KEY_ENTER;
+ default:
+ return code;
+ }
+}
+
int button_get_code(struct udevice *dev)
{
struct button_ops *ops = button_get_ops(dev);
+ int code;
if (!ops->get_code)
return -ENOSYS;
- return ops->get_code(dev);
+ code = ops->get_code(dev);
+ if (CONFIG_IS_ENABLED(BUTTON_REMAP_PHONE_KEYS))
+ return button_remap_phone_keys(code);
+ else
+ return code;
}
UCLASS_DRIVER(button) = {
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index a9937c2..353ae47 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -569,8 +569,20 @@
return 0;
ops = clk_dev_ops(clk->dev);
- if (!ops->set_rate)
- return -ENOSYS;
+ /* Try to find parents which can set rate */
+ while (!ops->set_rate) {
+ struct clk *parent;
+
+ if (!(clk->flags & CLK_SET_RATE_PARENT))
+ return -ENOSYS;
+
+ parent = clk_get_parent(clk);
+ if (IS_ERR_OR_NULL(parent) || !clk_valid(parent))
+ return -ENODEV;
+
+ clk = parent;
+ ops = clk_dev_ops(clk->dev);
+ }
/* get private clock struct used for cache */
clk_get_priv(clk, &clkp);
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 8f42a5c..81e19d3 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -86,6 +86,7 @@
*/
static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
+ PLL_FRACN_GP(600000000U, 200, 0, 1, 0, 8),
PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
@@ -93,7 +94,8 @@
PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10),
- PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12)
+ PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12),
+ PLL_FRACN_GP(200000000U, 200, 0, 1, 0, 24)
};
struct imx_fracn_gppll_clk imx_fracn_gppll = {
@@ -111,6 +113,7 @@
PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2),
PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3),
PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4),
+ PLL_FRACN_GP_INTEGER(800000000U, 200, 1, 6),
};
struct imx_fracn_gppll_clk imx_fracn_gppll_integer = {
diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
index ede36c4..b31e57a 100644
--- a/drivers/clk/imx/clk-imx93.c
+++ b/drivers/clk/imx/clk-imx93.c
@@ -13,6 +13,11 @@
#include "clk.h"
+#define IMX93_CLK_END 207
+
+#define PLAT_IMX93 BIT(0)
+#define PLAT_IMX91 BIT(1)
+
enum clk_sel {
LOW_SPEED_IO_SEL,
NON_IO_SEL,
@@ -50,6 +55,7 @@
u32 off;
enum clk_sel sel;
unsigned long flags;
+ unsigned long plat;
} root_array[] = {
/* a55/m33/bus critical clk for system run */
{ IMX93_CLK_A55_PERIPH, "a55_periph_root", 0x0000, FAST_SEL, CLK_IS_CRITICAL },
@@ -60,7 +66,7 @@
{ IMX93_CLK_BUS_AON, "bus_aon_root", 0x0300, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_WAKEUP_AXI, "wakeup_axi_root", 0x0380, FAST_SEL, CLK_IS_CRITICAL },
{ IMX93_CLK_SWO_TRACE, "swo_trace_root", 0x0400, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_M33_SYSTICK, "m33_systick_root", 0x0480, LOW_SPEED_IO_SEL, },
+ { IMX93_CLK_M33_SYSTICK, "m33_systick_root", 0x0480, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
{ IMX93_CLK_FLEXIO1, "flexio1_root", 0x0500, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_FLEXIO2, "flexio2_root", 0x0580, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_LPTMR1, "lptmr1_root", 0x0700, LOW_SPEED_IO_SEL, },
@@ -117,15 +123,15 @@
{ IMX93_CLK_HSIO_ACSCAN_80M, "hsio_acscan_80m_root", 0x1f80, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_HSIO_ACSCAN_480M, "hsio_acscan_480m_root", 0x2000, MISC_SEL, },
{ IMX93_CLK_NIC_AXI, "nic_axi_root", 0x2080, FAST_SEL, CLK_IS_CRITICAL, },
- { IMX93_CLK_ML_APB, "ml_apb_root", 0x2180, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_ML, "ml_root", 0x2200, FAST_SEL, },
+ { IMX93_CLK_ML_APB, "ml_apb_root", 0x2180, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_ML, "ml_root", 0x2200, FAST_SEL, 0, PLAT_IMX93, },
{ IMX93_CLK_MEDIA_AXI, "media_axi_root", 0x2280, FAST_SEL, },
{ IMX93_CLK_MEDIA_APB, "media_apb_root", 0x2300, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_MEDIA_LDB, "media_ldb_root", 0x2380, VIDEO_SEL, },
+ { IMX93_CLK_MEDIA_LDB, "media_ldb_root", 0x2380, VIDEO_SEL, 0, PLAT_IMX93, },
{ IMX93_CLK_MEDIA_DISP_PIX, "media_disp_pix_root", 0x2400, VIDEO_SEL, },
{ IMX93_CLK_CAM_PIX, "cam_pix_root", 0x2480, VIDEO_SEL, },
- { IMX93_CLK_MIPI_TEST_BYTE, "mipi_test_byte_root", 0x2500, VIDEO_SEL, },
- { IMX93_CLK_MIPI_PHY_CFG, "mipi_phy_cfg_root", 0x2580, VIDEO_SEL, },
+ { IMX93_CLK_MIPI_TEST_BYTE, "mipi_test_byte_root", 0x2500, VIDEO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_MIPI_PHY_CFG, "mipi_phy_cfg_root", 0x2580, VIDEO_SEL, 0, PLAT_IMX93, },
{ IMX93_CLK_ADC, "adc_root", 0x2700, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_PDM, "pdm_root", 0x2780, AUDIO_SEL, },
{ IMX93_CLK_TSTMR1, "tstmr1_root", 0x2800, LOW_SPEED_IO_SEL, },
@@ -134,13 +140,16 @@
{ IMX93_CLK_MQS2, "mqs2_root", 0x2980, AUDIO_SEL, },
{ IMX93_CLK_AUDIO_XCVR, "audio_xcvr_root", 0x2a00, NON_IO_SEL, },
{ IMX93_CLK_SPDIF, "spdif_root", 0x2a80, AUDIO_SEL, },
- { IMX93_CLK_ENET, "enet_root", 0x2b00, NON_IO_SEL, },
- { IMX93_CLK_ENET_TIMER1, "enet_timer1_root", 0x2b80, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_ENET_TIMER2, "enet_timer2_root", 0x2c00, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_ENET_REF, "enet_ref_root", 0x2c80, NON_IO_SEL, },
- { IMX93_CLK_ENET_REF_PHY, "enet_ref_phy_root", 0x2d00, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_I3C1_SLOW, "i3c1_slow_root", 0x2d80, LOW_SPEED_IO_SEL, },
- { IMX93_CLK_I3C2_SLOW, "i3c2_slow_root", 0x2e00, LOW_SPEED_IO_SEL, },
+ { IMX93_CLK_ENET, "enet_root", 0x2b00, NON_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_ENET_TIMER1, "enet_timer1_root", 0x2b80, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_ENET_TIMER2, "enet_timer2_root", 0x2c00, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_ENET_REF, "enet_ref_root", 0x2c80, NON_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_ENET_REF_PHY, "enet_ref_phy_root", 0x2d00, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
+ { IMX91_CLK_ENET1_QOS_TSN, "enet1_qos_tsn_root", 0x2b00, NON_IO_SEL, 0, PLAT_IMX91, },
+ { IMX91_CLK_ENET_TIMER, "enet_timer_root", 0x2b80, LOW_SPEED_IO_SEL, 0, PLAT_IMX91, },
+ { IMX91_CLK_ENET2_REGULAR, "enet2_regular_root", 0x2c80, NON_IO_SEL, 0, PLAT_IMX91, },
+ { IMX93_CLK_I3C1_SLOW, "i3c1_slow_root", 0x2d80, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
+ { IMX93_CLK_I3C2_SLOW, "i3c2_slow_root", 0x2e00, LOW_SPEED_IO_SEL, 0, PLAT_IMX93, },
{ IMX93_CLK_USB_PHY_BURUNIN, "usb_phy_root", 0x2e80, LOW_SPEED_IO_SEL, },
{ IMX93_CLK_PAL_CAME_SCAN, "pal_came_scan_root", 0x2f00, MISC_SEL, }
};
@@ -152,6 +161,7 @@
u32 off;
unsigned long flags;
u32 *shared_count;
+ unsigned long plat;
} ccgr_array[] = {
{ IMX93_CLK_A55_GATE, "a55_alt", "a55_alt_root", 0x8000, },
/* M33 critical clk for system run */
@@ -226,7 +236,7 @@
{ IMX93_CLK_SAI3_IPG, "sai3_ipg_clk", "bus_wakeup_root", 0x94c0, 0, &share_count_sai3},
{ IMX93_CLK_MIPI_CSI_GATE, "mipi_csi", "media_apb_root", 0x9580, },
{ IMX93_CLK_MIPI_DSI_GATE, "mipi_dsi", "media_apb_root", 0x95c0, },
- { IMX93_CLK_LVDS_GATE, "lvds", "media_ldb_root", 0x9600, },
+ { IMX93_CLK_LVDS_GATE, "lvds", "media_ldb_root", 0x9600, 0, NULL, PLAT_IMX93, },
{ IMX93_CLK_LCDIF_GATE, "lcdif", "media_apb_root", 0x9640, },
{ IMX93_CLK_PXP_GATE, "pxp", "media_apb_root", 0x9680, },
{ IMX93_CLK_ISI_GATE, "isi", "media_apb_root", 0x96c0, },
@@ -240,8 +250,10 @@
{ IMX93_CLK_AUD_XCVR_GATE, "aud_xcvr", "audio_xcvr_root", 0x9b80, },
{ IMX93_CLK_SPDIF_GATE, "spdif", "spdif_root", 0x9c00, },
{ IMX93_CLK_HSIO_32K_GATE, "hsio_32k", "clock-osc-24m", 0x9dc0, },
- { IMX93_CLK_ENET1_GATE, "enet1", "wakeup_axi_root", 0x9e00, },
- { IMX93_CLK_ENET_QOS_GATE, "enet_qos", "wakeup_axi_root", 0x9e40, },
+ { IMX93_CLK_ENET1_GATE, "enet1", "wakeup_axi_root", 0x9e00, 0, NULL, PLAT_IMX93, },
+ { IMX93_CLK_ENET_QOS_GATE, "enet_qos", "wakeup_axi_root", 0x9e40, 0, NULL, PLAT_IMX93, },
+ { IMX91_CLK_ENET2_REGULAR_GATE, "enet2_regular", "wakeup_axi_root", 0x9e00, 0, NULL, PLAT_IMX91, },
+ { IMX91_CLK_ENET1_QOS_TSN_GATE, "enet1_qos_tsn", "wakeup_axi_root", 0x9e40, 0, NULL, PLAT_IMX91, },
/* Critical because clk accessed during CPU idle */
{ IMX93_CLK_SYS_CNT_GATE, "sys_cnt", "clock-osc-24m", 0x9e80, CLK_IS_CRITICAL},
{ IMX93_CLK_TSTMR1_GATE, "tstmr1", "bus_aon_root", 0x9ec0, },
@@ -257,6 +269,7 @@
struct clk osc_24m_clk, osc_32k_clk, ext1_clk;
void __iomem *base, *anatop_base;
int i, ret;
+ const unsigned long plat = (unsigned long)dev_get_driver_data(dev);
clk_dm(IMX93_CLK_DUMMY, clk_register_fixed_rate(NULL, "dummy", 0UL));
@@ -307,6 +320,8 @@
for (i = 0; i < ARRAY_SIZE(root_array); i++) {
root = &root_array[i];
+ if (root->plat && !(root->plat & plat))
+ continue;
clk_dm(root->clk, imx93_clk_composite_flags(root->name,
parent_names[root->sel],
4, base + root->off, 3,
@@ -315,6 +330,8 @@
for (i = 0; i < ARRAY_SIZE(ccgr_array); i++) {
ccgr = &ccgr_array[i];
+ if (ccgr->plat && !(ccgr->plat & plat))
+ continue;
clk_dm(ccgr->clk, imx93_clk_gate(NULL, ccgr->name, ccgr->parent_name,
ccgr->flags, base + ccgr->off, 0, 1, 1, 3,
ccgr->shared_count));
@@ -328,7 +345,8 @@
}
static const struct udevice_id imx93_clk_ids[] = {
- { .compatible = "fsl,imx93-ccm" },
+ { .compatible = "fsl,imx93-ccm", .data = (unsigned long)PLAT_IMX93 },
+ { .compatible = "fsl,imx91-ccm", .data = (unsigned long)PLAT_IMX91 },
{ /* Sentinel */ },
};
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index c8735d8..3c5340d 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -69,7 +69,15 @@
dev_dbg(clk->dev, "%s %s clock %u\n", enable ? "enable" : "disable",
is_mod_clk(clk->id) ? "module" : "core", cpg_clk_id);
+
if (!is_mod_clk(clk->id)) {
+ /*
+ * Non-module clocks are always on. Ignore attempts to enable
+ * them and reject attempts to disable them.
+ */
+ if (enable)
+ return 0;
+
dev_err(clk->dev, "ID %lu is not a module clock\n", clk->id);
return -EINVAL;
}
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 155ea8d..6e87db1 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -8,7 +8,6 @@
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
-#include <handoff.h>
#include <log.h>
#include <malloc.h>
#include <mapmem.h>
@@ -1468,7 +1467,7 @@
init_clocks = true;
#elif CONFIG_IS_ENABLED(HANDOFF)
if (!(gd->flags & GD_FLG_RELOC)) {
- if (!handoff_get())
+ if (!(gd->spl_handoff))
init_clocks = true;
}
#endif
diff --git a/drivers/clk/ti/clk-k3-pll.c b/drivers/clk/ti/clk-k3-pll.c
index b3a1b4c..b775bd5 100644
--- a/drivers/clk/ti/clk-k3-pll.c
+++ b/drivers/clk/ti/clk-k3-pll.c
@@ -14,6 +14,7 @@
#include <linux/clk-provider.h>
#include "k3-clk.h"
#include <linux/rational.h>
+#include <linux/delay.h>
/* 16FFT register offsets */
#define PLL_16FFT_CFG 0x08
@@ -29,10 +30,12 @@
/* CAL STAT register bits */
#define PLL_16FFT_CAL_STAT_CAL_LOCK BIT(31)
+#define PLL_16FFT_CAL_STAT_CAL_LOCK_TIMEOUT (4350U * 100U)
/* CFG register bits */
#define PLL_16FFT_CFG_PLL_TYPE_SHIFT (0)
#define PLL_16FFT_CFG_PLL_TYPE_MASK (0x3 << 0)
+#define PLL_16FFT_CFG_PLL_TYPE_FRAC2 0
#define PLL_16FFT_CFG_PLL_TYPE_FRACF 1
/* CAL CTRL register bits */
@@ -41,14 +44,21 @@
#define PLL_16FFT_CAL_CTRL_CAL_BYP BIT(15)
#define PLL_16FFT_CAL_CTRL_CAL_CNT_SHIFT 16
#define PLL_16FFT_CAL_CTRL_CAL_CNT_MASK (0x7 << 16)
+#define PLL_16FFT_CAL_CTRL_CAL_IN_MASK (0xFFFU)
/* CTRL register bits */
#define PLL_16FFT_CTRL_BYPASS_EN BIT(31)
+#define PLL_16FFT_CTRL_BYP_ON_LOCKLOSS BIT(16)
#define PLL_16FFT_CTRL_PLL_EN BIT(15)
+#define PLL_16FFT_CTRL_INTL_BYP_EN BIT(8)
+#define PLL_16FFT_CTRL_CLK_4PH_EN BIT(5)
+#define PLL_16FFT_CTRL_CLK_POSTDIV_EN BIT(4)
#define PLL_16FFT_CTRL_DSM_EN BIT(1)
+#define PLL_16FFT_CTRL_DAC_EN BIT(0)
/* STAT register bits */
#define PLL_16FFT_STAT_LOCK BIT(0)
+#define PLL_16FFT_STAT_LOCK_TIMEOUT (150U * 100U)
/* FREQ_CTRL0 bits */
#define PLL_16FFT_FREQ_CTRL0_FB_DIV_INT_MASK 0xfff
@@ -62,7 +72,6 @@
/* FREQ_CTRL1 bits */
#define PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_BITS 24
#define PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_MASK 0xffffff
-#define PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_SHIFT 0
/* KICK register magic values */
#define PLL_KICK0_VALUE 0x68ef3490
@@ -75,68 +84,199 @@
*/
struct ti_pll_clk {
struct clk clk;
- void __iomem *reg;
+ void __iomem *base;
};
#define to_clk_pll(_clk) container_of(_clk, struct ti_pll_clk, clk)
-static int ti_pll_wait_for_lock(struct clk *clk)
+static int ti_pll_clk_disable(struct clk *clk)
{
struct ti_pll_clk *pll = to_clk_pll(clk);
+ u32 ctrl;
+
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
+
+ if ((ctrl & PLL_16FFT_CTRL_PLL_EN)) {
+ ctrl &= ~PLL_16FFT_CTRL_PLL_EN;
+ writel(ctrl, pll->base + PLL_16FFT_CTRL);
+
+ /* wait 1us */
+ udelay(1);
+ }
+
+ return 0;
+}
+
+static int ti_pll_clk_enable(struct clk *clk)
+{
+ struct ti_pll_clk *pll = to_clk_pll(clk);
+ u32 ctrl;
+
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
+ ctrl |= PLL_16FFT_CTRL_PLL_EN;
+ writel(ctrl, pll->base + PLL_16FFT_CTRL);
+
+ /* Wait 1us */
+ udelay(1);
+
+ return 0;
+}
+
+static bool clk_pll_16fft_check_lock(const struct ti_pll_clk *pll)
+{
u32 stat;
+
+ stat = readl(pll->base + PLL_16FFT_STAT);
+ return (stat & PLL_16FFT_STAT_LOCK);
+}
+
+static bool clk_pll_16fft_check_cal_lock(const struct ti_pll_clk *pll)
+{
+ u32 stat;
+
+ stat = readl(pll->base + PLL_16FFT_CAL_STAT);
+ return (stat & PLL_16FFT_CAL_STAT_CAL_LOCK);
+}
+
+static void clk_pll_16fft_cal_int(const struct ti_pll_clk *pll)
+{
+ u32 cal;
+
+ cal = readl(pll->base + PLL_16FFT_CAL_CTRL);
+
+ /* Enable fast cal mode */
+ cal |= PLL_16FFT_CAL_CTRL_FAST_CAL;
+
+ /* Disable calibration bypass */
+ cal &= ~PLL_16FFT_CAL_CTRL_CAL_BYP;
+
+ /* Set CALCNT to 2 */
+ cal &= ~PLL_16FFT_CAL_CTRL_CAL_CNT_MASK;
+ cal |= 2 << PLL_16FFT_CAL_CTRL_CAL_CNT_SHIFT;
+
+ /* Set CAL_IN to 0 */
+ cal &= ~PLL_16FFT_CAL_CTRL_CAL_IN_MASK;
+
+ /* Note this register does not readback the written value. */
+ writel(cal, pll->base + PLL_16FFT_CAL_CTRL);
+
+ /* Wait 1us before enabling the CAL_EN field */
+ udelay(1);
+
+ cal = readl(pll->base + PLL_16FFT_CAL_CTRL);
+
+ /* Enable calibration for FRACF */
+ cal |= PLL_16FFT_CAL_CTRL_CAL_EN;
+
+ /* Note this register does not readback the written value. */
+ writel(cal, pll->base + PLL_16FFT_CAL_CTRL);
+}
+
+static void clk_pll_16fft_disable_cal(const struct ti_pll_clk *pll)
+{
+ u32 cal, stat;
+
+ cal = readl(pll->base + PLL_16FFT_CAL_CTRL);
+ cal &= ~PLL_16FFT_CAL_CTRL_CAL_EN;
+ /* Note this register does not readback the written value. */
+ writel(cal, pll->base + PLL_16FFT_CAL_CTRL);
+ do {
+ stat = readl(pll->base + PLL_16FFT_CAL_STAT);
+ } while (stat & PLL_16FFT_CAL_STAT_CAL_LOCK);
+}
+
+static int ti_pll_wait_for_lock(struct clk *clk)
+{
+ struct ti_pll_clk *pll = to_clk_pll(clk);
u32 cfg;
u32 cal;
u32 freq_ctrl1;
- int i;
+ unsigned int i;
u32 pllfm;
u32 pll_type;
- int success;
+ u32 cal_en = 0;
+ bool success;
- for (i = 0; i < 100000; i++) {
- stat = readl(pll->reg + PLL_16FFT_STAT);
- if (stat & PLL_16FFT_STAT_LOCK) {
- success = 1;
+ /*
+ * Minimum VCO input freq is 5MHz, and the longest a lock should
+ * be consider to be timed out after 750 cycles. Be conservative
+ * and assume each loop takes 10 cycles and we run at a
+ * max of 1GHz. That gives 15000 loop cycles. We may end up waiting
+ * longer than necessary for timeout, but that should be ok.
+ */
+ success = false;
+ for (i = 0; i < PLL_16FFT_STAT_LOCK_TIMEOUT; i++) {
+ if (clk_pll_16fft_check_lock(pll)) {
+ success = true;
break;
}
}
- /* Enable calibration if not in fractional mode of the FRACF PLL */
- freq_ctrl1 = readl(pll->reg + PLL_16FFT_FREQ_CTRL1);
+ /* Disable calibration in the fractional mode of the FRACF PLL based on data
+ * from silicon and simulation data.
+ */
+ freq_ctrl1 = readl(pll->base + PLL_16FFT_FREQ_CTRL1);
pllfm = freq_ctrl1 & PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_MASK;
- pllfm >>= PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_SHIFT;
- cfg = readl(pll->reg + PLL_16FFT_CFG);
+
+ cfg = readl(pll->base + PLL_16FFT_CFG);
pll_type = (cfg & PLL_16FFT_CFG_PLL_TYPE_MASK) >> PLL_16FFT_CFG_PLL_TYPE_SHIFT;
- if (success && pll_type == PLL_16FFT_CFG_PLL_TYPE_FRACF && pllfm == 0) {
- cal = readl(pll->reg + PLL_16FFT_CAL_CTRL);
+ if (success && pll_type == PLL_16FFT_CFG_PLL_TYPE_FRACF) {
+ cal = readl(pll->base + PLL_16FFT_CAL_CTRL);
+ cal_en = (cal & PLL_16FFT_CAL_CTRL_CAL_EN);
+ }
- /* Enable calibration for FRACF */
- cal |= PLL_16FFT_CAL_CTRL_CAL_EN;
+ if (success && pll_type == PLL_16FFT_CFG_PLL_TYPE_FRACF &&
+ pllfm == 0 && cal_en == 1) {
+ /*
+ * Wait for calibration lock.
+ *
+ * Lock should occur within:
+ *
+ * 170 * 2^(5+CALCNT) / PFD
+ * 21760 / PFD
+ *
+ * CALCNT = 2, PFD = 5-50MHz. This gives a range of 0.435mS to
+ * 4.35mS depending on PFD frequency.
+ *
+ * Be conservative and assume each loop takes 10 cycles and we run at a
+ * max of 1GHz. That gives 435000 loop cycles. We may end up waiting
+ * longer than necessary for timeout, but that should be ok.
+ *
+ * The recommend timeout for CALLOCK to go high is 4.35 ms
+ */
+ success = false;
+ for (i = 0; i < PLL_16FFT_CAL_STAT_CAL_LOCK_TIMEOUT; i++) {
+ if (clk_pll_16fft_check_cal_lock(pll)) {
+ success = true;
+ break;
+ }
+ }
- /* Enable fast cal mode */
- cal |= PLL_16FFT_CAL_CTRL_FAST_CAL;
+ /* In case of cal lock failure, operate without calibration */
+ if (!success) {
+ debug("Failure for calibration, falling back without calibration\n");
- /* Disable calibration bypass */
- cal &= ~PLL_16FFT_CAL_CTRL_CAL_BYP;
+ /* Disable PLL */
+ ti_pll_clk_disable(clk);
- /* Set CALCNT to 2 */
- cal &= ~PLL_16FFT_CAL_CTRL_CAL_CNT_MASK;
- cal |= 2 << PLL_16FFT_CAL_CTRL_CAL_CNT_SHIFT;
+ /* Disable Calibration */
+ clk_pll_16fft_disable_cal(pll);
- /* Note this register does not readback the written value. */
- writel(cal, pll->reg + PLL_16FFT_CAL_CTRL);
+ /* Enable PLL */
+ ti_pll_clk_enable(clk);
- success = 0;
- for (i = 0; i < 100000; i++) {
- stat = readl(pll->reg + PLL_16FFT_CAL_STAT);
- if (stat & PLL_16FFT_CAL_STAT_CAL_LOCK) {
- success = 1;
- break;
+ /* Wait for PLL Lock */
+ for (i = 0; i < PLL_16FFT_STAT_LOCK_TIMEOUT; i++) {
+ if (clk_pll_16fft_check_lock(pll)) {
+ success = true;
+ break;
+ }
}
}
}
- if (success == 0) {
+ if (!success) {
printf("%s: pll (%s) failed to lock\n", __func__,
clk->dev->name);
return -EBUSY;
@@ -156,14 +296,14 @@
u32 ctrl;
/* Check if we are in bypass */
- ctrl = readl(pll->reg + PLL_16FFT_CTRL);
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
if (ctrl & PLL_16FFT_CTRL_BYPASS_EN)
return parent_freq;
- pllm = readl(pll->reg + PLL_16FFT_FREQ_CTRL0);
- pllfm = readl(pll->reg + PLL_16FFT_FREQ_CTRL1);
+ pllm = readl(pll->base + PLL_16FFT_FREQ_CTRL0);
+ pllfm = readl(pll->base + PLL_16FFT_FREQ_CTRL1);
- plld = readl(pll->reg + PLL_16FFT_DIV_CTRL) &
+ plld = readl(pll->base + PLL_16FFT_DIV_CTRL) &
PLL_16FFT_DIV_CTRL_REF_DIV_MASK;
current_freq = parent_freq * pllm / plld;
@@ -180,6 +320,30 @@
return current_freq;
}
+static bool ti_pll_clk_is_bypass(struct ti_pll_clk *pll)
+{
+ u32 ctrl;
+ bool ret;
+
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
+ ret = (ctrl & PLL_16FFT_CTRL_BYPASS_EN) != 0;
+
+ return ret;
+}
+
+static void ti_pll_clk_bypass(struct ti_pll_clk *pll, bool bypass)
+{
+ u32 ctrl;
+
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
+ if (bypass)
+ ctrl |= PLL_16FFT_CTRL_BYPASS_EN;
+ else
+ ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN;
+
+ writel(ctrl, pll->base + PLL_16FFT_CTRL);
+}
+
static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)
{
struct ti_pll_clk *pll = to_clk_pll(clk);
@@ -187,9 +351,13 @@
u64 parent_freq = clk_get_parent_rate(clk);
int ret;
u32 ctrl;
+ u32 cfg;
+ u32 pll_type;
unsigned long pllm;
u32 pllfm = 0;
unsigned long plld;
+ u32 freq_ctrl0;
+ u32 freq_ctrl1;
u32 div_ctrl;
u32 rem;
int shift;
@@ -212,16 +380,22 @@
break;
}
- /* Put PLL to bypass mode */
- ctrl = readl(pll->reg + PLL_16FFT_CTRL);
- ctrl |= PLL_16FFT_CTRL_BYPASS_EN;
- writel(ctrl, pll->reg + PLL_16FFT_CTRL);
+ if (!ti_pll_clk_is_bypass(pll)) {
+ /* Put the PLL into bypass */
+ ti_pll_clk_bypass(pll, true);
+ }
+
+ /* Disable the PLL */
+ ti_pll_clk_disable(clk);
if (rate == parent_freq) {
debug("%s: put %s to bypass\n", __func__, clk->dev->name);
return rate;
}
+ cfg = readl(pll->base + PLL_16FFT_CFG);
+ pll_type = (cfg & PLL_16FFT_CFG_PLL_TYPE_MASK) >> PLL_16FFT_CFG_PLL_TYPE_SHIFT;
+
debug("%s: pre-frac-calc: rate=%u, parent_freq=%u, plld=%u, pllm=%u\n",
__func__, (u32)rate, (u32)parent_freq, (u32)plld, (u32)pllm);
@@ -237,31 +411,75 @@
plld = 1;
}
- if (pllfm)
- ctrl |= PLL_16FFT_CTRL_DSM_EN;
- else
- ctrl &= ~PLL_16FFT_CTRL_DSM_EN;
+ /* Program the new rate */
+ freq_ctrl0 = readl(pll->base + PLL_16FFT_FREQ_CTRL0);
+ freq_ctrl1 = readl(pll->base + PLL_16FFT_FREQ_CTRL1);
+ div_ctrl = readl(pll->base + PLL_16FFT_DIV_CTRL);
- writel(pllm, pll->reg + PLL_16FFT_FREQ_CTRL0);
- writel(pllfm, pll->reg + PLL_16FFT_FREQ_CTRL1);
+ freq_ctrl0 &= ~PLL_16FFT_FREQ_CTRL0_FB_DIV_INT_MASK;
+ freq_ctrl0 |= pllm;
+
+ freq_ctrl1 &= ~PLL_16FFT_FREQ_CTRL1_FB_DIV_FRAC_MASK;
+ freq_ctrl1 |= pllfm;
/*
* div_ctrl register contains other divider values, so rmw
* only plld and leave existing values alone
*/
- div_ctrl = readl(pll->reg + PLL_16FFT_DIV_CTRL);
div_ctrl &= ~PLL_16FFT_DIV_CTRL_REF_DIV_MASK;
div_ctrl |= plld;
- writel(div_ctrl, pll->reg + PLL_16FFT_DIV_CTRL);
- ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN;
- ctrl |= PLL_16FFT_CTRL_PLL_EN;
- writel(ctrl, pll->reg + PLL_16FFT_CTRL);
+ /* Make sure we have fractional support if required */
+ ctrl = readl(pll->base + PLL_16FFT_CTRL);
+
+ /* Don't use internal bypass,it is not glitch free. Always prefer glitchless bypass */
+ ctrl &= ~(PLL_16FFT_CTRL_INTL_BYP_EN | PLL_16FFT_CTRL_CLK_4PH_EN);
+
+ /* Always enable output if PLL, Always bypass if we lose lock */
+ ctrl |= (PLL_16FFT_CTRL_CLK_POSTDIV_EN | PLL_16FFT_CTRL_BYP_ON_LOCKLOSS);
+
+ /* Enable fractional support if required */
+ if (pll_type == PLL_16FFT_CFG_PLL_TYPE_FRACF) {
+ if (pllfm != 0)
+ ctrl |= (PLL_16FFT_CTRL_DSM_EN | PLL_16FFT_CTRL_DAC_EN);
+ else
+ ctrl &= ~(PLL_16FFT_CTRL_DSM_EN | PLL_16FFT_CTRL_DAC_EN);
+ }
+
+ /* Enable Fractional by default for PLL_16FFT_CFG_PLL_TYPE_FRAC2 */
+ if (pll_type == PLL_16FFT_CFG_PLL_TYPE_FRAC2)
+ ctrl |= (PLL_16FFT_CTRL_DSM_EN | PLL_16FFT_CTRL_DAC_EN);
+
+ writel(freq_ctrl0, pll->base + PLL_16FFT_FREQ_CTRL0);
+ writel(freq_ctrl1, pll->base + PLL_16FFT_FREQ_CTRL1);
+ writel(div_ctrl, pll->base + PLL_16FFT_DIV_CTRL);
+ writel(ctrl, pll->base + PLL_16FFT_CTRL);
+
+ /* Configure PLL calibration*/
+ if (pll_type == PLL_16FFT_CFG_PLL_TYPE_FRACF) {
+ if (pllfm != 0) {
+ /* Disable Calibration in Fractional mode */
+ clk_pll_16fft_disable_cal(pll);
+ } else {
+ /* Enable Calibration in Integer mode */
+ clk_pll_16fft_cal_int(pll);
+ }
+ }
+
+ /*
+ * Wait at least 1 ref cycle before enabling PLL.
+ * Minimum VCO input frequency is 5MHz, therefore maximum
+ * wait time for 1 ref clock is 0.2us.
+ */
+ udelay(1);
+ ti_pll_clk_enable(clk);
ret = ti_pll_wait_for_lock(clk);
if (ret)
return ret;
+ ti_pll_clk_bypass(pll, false);
+
debug("%s: pllm=%u, plld=%u, pllfm=%u, parent_freq=%u\n",
__func__, (u32)pllm, (u32)plld, (u32)pllfm, (u32)parent_freq);
@@ -279,30 +497,7 @@
return current_freq;
}
-static int ti_pll_clk_enable(struct clk *clk)
-{
- struct ti_pll_clk *pll = to_clk_pll(clk);
- u32 ctrl;
-
- ctrl = readl(pll->reg + PLL_16FFT_CTRL);
- ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN;
- ctrl |= PLL_16FFT_CTRL_PLL_EN;
- writel(ctrl, pll->reg + PLL_16FFT_CTRL);
-
- return ti_pll_wait_for_lock(clk);
-}
-
-static int ti_pll_clk_disable(struct clk *clk)
-{
- struct ti_pll_clk *pll = to_clk_pll(clk);
- u32 ctrl;
- ctrl = readl(pll->reg + PLL_16FFT_CTRL);
- ctrl |= PLL_16FFT_CTRL_BYPASS_EN;
- writel(ctrl, pll->reg + PLL_16FFT_CTRL);
-
- return 0;
-}
static const struct clk_ops ti_pll_clk_ops = {
.get_rate = ti_pll_clk_get_rate,
@@ -323,7 +518,7 @@
if (!pll)
return ERR_PTR(-ENOMEM);
- pll->reg = reg;
+ pll->base = reg;
ret = clk_register(&pll->clk, "ti-pll-clk", name, parent_name);
if (ret) {
@@ -333,19 +528,19 @@
}
/* Unlock the PLL registers */
- writel(PLL_KICK0_VALUE, pll->reg + PLL_KICK0);
- writel(PLL_KICK1_VALUE, pll->reg + PLL_KICK1);
+ writel(PLL_KICK0_VALUE, pll->base + PLL_KICK0);
+ writel(PLL_KICK1_VALUE, pll->base + PLL_KICK1);
/* Enable all HSDIV outputs */
- cfg = readl(pll->reg + PLL_16FFT_CFG);
+ cfg = readl(pll->base + PLL_16FFT_CFG);
for (i = 0; i < 16; i++) {
hsdiv_presence_bit = BIT(16 + i);
hsdiv_ctrl_offs = 0x80 + (i * 4);
/* Enable HSDIV output if present */
if ((hsdiv_presence_bit & cfg) != 0UL) {
- ctrl = readl(pll->reg + hsdiv_ctrl_offs);
+ ctrl = readl(pll->base + hsdiv_ctrl_offs);
ctrl |= PLL_16FFT_HSDIV_CTRL_CLKOUT_EN;
- writel(ctrl, pll->reg + hsdiv_ctrl_offs);
+ writel(ctrl, pll->base + hsdiv_ctrl_offs);
}
}
diff --git a/drivers/core/of_access.c b/drivers/core/of_access.c
index 77acd76..b11e362 100644
--- a/drivers/core/of_access.c
+++ b/drivers/core/of_access.c
@@ -666,11 +666,12 @@
return i <= 0 ? -ENODATA : i;
}
-static int __of_parse_phandle_with_args(const struct device_node *np,
- const char *list_name,
- const char *cells_name,
- int cell_count, int index,
- struct of_phandle_args *out_args)
+static int __of_root_parse_phandle_with_args(struct device_node *root,
+ const struct device_node *np,
+ const char *list_name,
+ const char *cells_name,
+ int cell_count, int index,
+ struct of_phandle_args *out_args)
{
const __be32 *list, *list_end;
int rc = 0, cur_index = 0;
@@ -706,7 +707,7 @@
* below.
*/
if (cells_name || cur_index == index) {
- node = of_find_node_by_phandle(NULL, phandle);
+ node = of_find_node_by_phandle(root, phandle);
if (!node) {
dm_warn("%s: could not find phandle\n",
np->full_name);
@@ -783,39 +784,65 @@
return rc;
}
-struct device_node *of_parse_phandle(const struct device_node *np,
- const char *phandle_name, int index)
+struct device_node *of_root_parse_phandle(struct device_node *root,
+ const struct device_node *np,
+ const char *phandle_name, int index)
{
struct of_phandle_args args;
if (index < 0)
return NULL;
- if (__of_parse_phandle_with_args(np, phandle_name, NULL, 0, index,
- &args))
+ if (__of_root_parse_phandle_with_args(root, np, phandle_name, NULL, 0,
+ index, &args))
return NULL;
return args.np;
}
+int of_root_parse_phandle_with_args(struct device_node *root,
+ const struct device_node *np,
+ const char *list_name, const char *cells_name,
+ int cell_count, int index,
+ struct of_phandle_args *out_args)
+{
+ if (index < 0)
+ return -EINVAL;
+
+ return __of_root_parse_phandle_with_args(root, np, list_name, cells_name,
+ cell_count, index, out_args);
+}
+
+int of_root_count_phandle_with_args(struct device_node *root,
+ const struct device_node *np,
+ const char *list_name, const char *cells_name,
+ int cell_count)
+{
+ return __of_root_parse_phandle_with_args(root, np, list_name, cells_name,
+ cell_count, -1, NULL);
+}
+
+struct device_node *of_parse_phandle(const struct device_node *np,
+ const char *phandle_name, int index)
+{
+ return of_root_parse_phandle(NULL, np, phandle_name, index);
+}
+
int of_parse_phandle_with_args(const struct device_node *np,
const char *list_name, const char *cells_name,
int cell_count, int index,
struct of_phandle_args *out_args)
{
- if (index < 0)
- return -EINVAL;
-
- return __of_parse_phandle_with_args(np, list_name, cells_name,
- cell_count, index, out_args);
+ return of_root_parse_phandle_with_args(NULL, np, list_name, cells_name,
+ cell_count, index, out_args);
}
int of_count_phandle_with_args(const struct device_node *np,
const char *list_name, const char *cells_name,
int cell_count)
{
- return __of_parse_phandle_with_args(np, list_name, cells_name,
- cell_count, -1, NULL);
+ return of_root_count_phandle_with_args(NULL, np, list_name, cells_name,
+ cell_count);
}
static void of_alias_add(struct alias_prop *ap, struct device_node *np,
diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index 950895e..c816182 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -879,11 +879,69 @@
return count;
}
-static void ofnode_from_fdtdec_phandle_args(struct fdtdec_phandle_args *in,
+ofnode ofnode_parse_phandle(ofnode node, const char *phandle_name,
+ int index)
+{
+ ofnode phandle;
+
+ if (ofnode_is_np(node)) {
+ struct device_node *np;
+
+ np = of_parse_phandle(ofnode_to_np(node), phandle_name,
+ index);
+ if (!np)
+ return ofnode_null();
+
+ phandle = np_to_ofnode(np);
+ } else {
+ struct fdtdec_phandle_args args;
+
+ if (fdtdec_parse_phandle_with_args(ofnode_to_fdt(node),
+ ofnode_to_offset(node),
+ phandle_name, NULL,
+ 0, index, &args))
+ return ofnode_null();
+
+ phandle = offset_to_ofnode(args.node);
+ }
+
+ return phandle;
+}
+
+ofnode oftree_parse_phandle(oftree tree, ofnode node, const char *phandle_name,
+ int index)
+{
+ ofnode phandle;
+
+ if (ofnode_is_np(node)) {
+ struct device_node *np;
+
+ np = of_root_parse_phandle(tree.np, ofnode_to_np(node),
+ phandle_name, index);
+ if (!np)
+ return ofnode_null();
+
+ phandle = np_to_ofnode(np);
+ } else {
+ struct fdtdec_phandle_args args;
+
+ if (fdtdec_parse_phandle_with_args(tree.fdt,
+ ofnode_to_offset(node),
+ phandle_name, NULL,
+ 0, index, &args))
+ return ofnode_null();
+
+ phandle = noffset_to_ofnode(node, args.node);
+ }
+
+ return phandle;
+}
+
+static void ofnode_from_fdtdec_phandle_args(ofnode node, struct fdtdec_phandle_args *in,
struct ofnode_phandle_args *out)
{
assert(OF_MAX_PHANDLE_ARGS == MAX_PHANDLE_ARGS);
- out->node = offset_to_ofnode(in->node);
+ out->node = noffset_to_ofnode(node, in->node);
out->args_count = in->args_count;
memcpy(out->args, in->args, sizeof(out->args));
}
@@ -923,7 +981,40 @@
cell_count, index, &args);
if (ret)
return ret;
+ ofnode_from_fdtdec_phandle_args(node, &args, out_args);
+ }
+
+ return 0;
+}
+
+int oftree_parse_phandle_with_args(oftree tree, ofnode node, const char *list_name,
+ const char *cells_name, int cell_count,
+ int index,
+ struct ofnode_phandle_args *out_args)
+{
+ if (ofnode_is_np(node)) {
+ struct of_phandle_args args;
+ int ret;
+
+ ret = of_root_parse_phandle_with_args(tree.np,
+ ofnode_to_np(node),
+ list_name, cells_name,
+ cell_count, index,
+ &args);
+ if (ret)
+ return ret;
+ ofnode_from_of_phandle_args(&args, out_args);
+ } else {
+ struct fdtdec_phandle_args args;
+ int ret;
+
+ ret = fdtdec_parse_phandle_with_args(tree.fdt,
+ ofnode_to_offset(node),
+ list_name, cells_name,
+ cell_count, index, &args);
+ if (ret)
+ return ret;
- ofnode_from_fdtdec_phandle_args(&args, out_args);
+ ofnode_from_fdtdec_phandle_args(node, &args, out_args);
}
return 0;
@@ -941,6 +1032,18 @@
cell_count, -1, NULL);
}
+int oftree_count_phandle_with_args(oftree tree, ofnode node, const char *list_name,
+ const char *cells_name, int cell_count)
+{
+ if (ofnode_is_np(node))
+ return of_root_count_phandle_with_args(tree.np, ofnode_to_np(node),
+ list_name, cells_name, cell_count);
+ else
+ return fdtdec_parse_phandle_with_args(tree.fdt,
+ ofnode_to_offset(node), list_name, cells_name,
+ cell_count, -1, NULL);
+}
+
ofnode ofnode_path(const char *path)
{
if (of_live_active())
@@ -1768,6 +1871,21 @@
return ofnode_read_string(uboot, prop_name);
}
+int ofnode_options_get_by_phandle(const char *prop_name, ofnode *nodep)
+{
+ ofnode uboot;
+
+ uboot = ofnode_path("/options/u-boot");
+ if (!ofnode_valid(uboot))
+ return -EINVAL;
+
+ *nodep = ofnode_parse_phandle(uboot, prop_name, 0);
+ if (!ofnode_valid(*nodep))
+ return -EINVAL;
+
+ return 0;
+}
+
int ofnode_read_bootscript_address(u64 *bootscr_address, u64 *bootscr_offset)
{
int ret;
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 7a714f5..c7fb582 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -147,6 +147,13 @@
return 0;
}
+
+void dm_remove_devices_active(void)
+{
+ /* Remove non-vital devices first */
+ device_remove(dm_root(), DM_REMOVE_ACTIVE_ALL | DM_REMOVE_NON_VITAL);
+ device_remove(dm_root(), DM_REMOVE_ACTIVE_ALL);
+}
#endif
int dm_scan_plat(bool pre_reloc_only)
diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 51262be..53d31b3 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -65,6 +65,14 @@
return "93(02)";/* iMX93 900Mhz Low performance Dual core without NPU */
case MXC_CPU_IMX9301:
return "93(01)";/* iMX93 900Mhz Low performance Single core without NPU */
+ case MXC_CPU_IMX91:
+ return "91(31)";/* iMX91 11x11 Full feature */
+ case MXC_CPU_IMX9121:
+ return "91(21)";/* iMX91 11x11 Low drive mode */
+ case MXC_CPU_IMX9111:
+ return "91(11)";/* iMX91 9x9 Reduced feature */
+ case MXC_CPU_IMX9101:
+ return "91(01)";/* iMX91 9x9 Specific feature */
default:
return "??";
}
@@ -127,6 +135,8 @@
if (IS_ENABLED(CONFIG_IMX8)) {
if (plat->cpu_rsrc == SC_R_A72)
idx = 2; /* use "cpu-thermal1" device */
+ } else if (IS_ENABLED(CONFIG_IMX91)) {
+ idx = 0;
} else {
idx = 1;
}
diff --git a/drivers/ddr/imx/phy/ddrphy_utils.c b/drivers/ddr/imx/phy/ddrphy_utils.c
index 14278f5..8e350de 100644
--- a/drivers/ddr/imx/phy/ddrphy_utils.c
+++ b/drivers/ddr/imx/phy/ddrphy_utils.c
@@ -144,6 +144,10 @@
dram_pll_init(MHZ(400));
dram_disable_bypass();
break;
+ case 1200:
+ dram_pll_init(MHZ(300));
+ dram_disable_bypass();
+ break;
case 1066:
dram_pll_init(MHZ(266));
dram_disable_bypass();
@@ -152,6 +156,10 @@
dram_pll_init(MHZ(233));
dram_disable_bypass();
break;
+ case 800:
+ dram_pll_init(MHZ(200));
+ dram_disable_bypass();
+ break;
case 667:
dram_pll_init(MHZ(167));
dram_disable_bypass();
diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index 604386b..e33b005 100644
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -89,6 +89,13 @@
used at board level to manage specific behavior
(OTP update for example).
+config DFU_SCSI
+ bool "SCSI flash back end for DFU"
+ help
+ This option enables using DFU to read and write to SCSI devices
+ used at board level to manage specific behavior
+ (OTP update for example).
+
config SET_DFU_ALT_INFO
bool "Dynamic set of DFU alternate information"
help
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 05d7cc6..6e1ab1c 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_$(XPL_)DFU_SF) += dfu_sf.o
obj-$(CONFIG_$(XPL_)DFU_WRITE_ALT) += dfu_alt.o
obj-$(CONFIG_$(XPL_)DFU_VIRT) += dfu_virt.o
+obj-$(CONFIG_$(XPL_)DFU_SCSI) += dfu_scsi.o
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 7a4d7ba..7565692 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -564,6 +564,9 @@
} else if (strcmp(interface, "virt") == 0) {
if (dfu_fill_entity_virt(dfu, devstr, argv, argc))
return -1;
+ } else if (strcmp(interface, "scsi") == 0) {
+ if (dfu_fill_entity_scsi(dfu, devstr, argv, argc))
+ return -1;
} else {
printf("%s: Device %s not (yet) supported!\n",
__func__, interface);
@@ -660,7 +663,7 @@
const char *dfu_get_dev_type(enum dfu_device_type t)
{
const char *const dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM",
- "SF", "MTD", "VIRT"};
+ "SF", "MTD", "VIRT", "SCSI"};
return dev_t[t];
}
diff --git a/drivers/dfu/dfu_scsi.c b/drivers/dfu/dfu_scsi.c
new file mode 100644
index 0000000..9f95194
--- /dev/null
+++ b/drivers/dfu/dfu_scsi.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DFU SCSI backend (based on MMC backend).
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski@samsung.com>
+ * Copyright (C) 2024 Linaro Ltd.
+ */
+
+#include <log.h>
+#include <malloc.h>
+#include <errno.h>
+#include <div64.h>
+#include <dfu.h>
+#include <ext4fs.h>
+#include <fat.h>
+#include <scsi.h>
+#include <part.h>
+#include <command.h>
+#include <linux/printk.h>
+
+static unsigned char *dfu_file_buf;
+static u64 dfu_file_buf_len;
+static u64 dfu_file_buf_offset;
+
+#define scsi_get_blk_desc(dev) ((struct blk_desc *)dev_get_uclass_plat(dev))
+
+#define find_scsi_device(dev_num, scsi) blk_get_device(UCLASS_SCSI, dev_num, scsi)
+
+static int scsi_block_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, long *len)
+{
+ struct udevice *scsi;
+ u32 blk_start, blk_count, n = 0;
+ int ret;
+
+ ret = find_scsi_device(dfu->data.scsi.lun, &scsi);
+ if (ret < 0) {
+ pr_err("Device scsi %d - not found!", dfu->data.scsi.lun);
+ return -ENODEV;
+ }
+
+ /*
+ * We must ensure that we work in lba_blk_size chunks, so ALIGN
+ * this value.
+ */
+ *len = ALIGN(*len, dfu->data.scsi.lba_blk_size);
+
+ blk_start = dfu->data.scsi.lba_start + (u32)lldiv(offset, dfu->data.scsi.lba_blk_size);
+ blk_count = *len / dfu->data.scsi.lba_blk_size;
+ if (blk_start + blk_count > dfu->data.scsi.lba_start + dfu->data.scsi.lba_size) {
+ puts("Request would exceed designated area!\n");
+ return -EINVAL;
+ }
+
+ debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n", __func__,
+ op == DFU_OP_READ ? "scsi READ" : "scsi WRITE", dfu->data.scsi.lun, blk_start,
+ blk_count, buf);
+ switch (op) {
+ case DFU_OP_READ:
+ n = blk_dread(scsi_get_blk_desc(scsi), blk_start, blk_count, buf);
+ break;
+ case DFU_OP_WRITE:
+ n = blk_dwrite(scsi_get_blk_desc(scsi), blk_start, blk_count, buf);
+ break;
+ default:
+ pr_err("Operation not supported\n");
+ }
+
+ if (n != blk_count) {
+ pr_err("scsi block operation failed");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int scsi_file_op(enum dfu_op op, struct dfu_entity *dfu, u64 offset, void *buf, u64 *len)
+{
+ char dev_part_str[8];
+ int ret;
+ int fstype;
+ loff_t size = 0;
+
+ switch (dfu->layout) {
+ case DFU_FS_FAT:
+ fstype = FS_TYPE_FAT;
+ break;
+ case DFU_FS_EXT4:
+ fstype = FS_TYPE_EXT;
+ break;
+ case DFU_SKIP:
+ return 0;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ return -1;
+ }
+
+ snprintf(dev_part_str, sizeof(dev_part_str), "%d:%d", dfu->data.scsi.dev,
+ dfu->data.scsi.part);
+
+ ret = fs_set_blk_dev("scsi", dev_part_str, fstype);
+ if (ret) {
+ puts("dfu: fs_set_blk_dev error!\n");
+ return ret;
+ }
+
+ switch (op) {
+ case DFU_OP_READ:
+ ret = fs_read(dfu->name, (size_t)buf, offset, *len, &size);
+ if (ret) {
+ puts("dfu: fs_read error!\n");
+ return ret;
+ }
+ *len = size;
+ break;
+ case DFU_OP_WRITE:
+ ret = fs_write(dfu->name, (size_t)buf, offset, *len, &size);
+ if (ret) {
+ puts("dfu: fs_write error!\n");
+ return ret;
+ }
+ break;
+ case DFU_OP_SIZE:
+ ret = fs_size(dfu->name, &size);
+ if (ret) {
+ puts("dfu: fs_size error!\n");
+ return ret;
+ }
+ *len = size;
+ break;
+ default:
+ return -1;
+ }
+
+ return ret;
+}
+
+static int scsi_file_buf_write(struct dfu_entity *dfu, u64 offset, void *buf, long *len)
+{
+ int ret = 0;
+
+ if (offset == 0) {
+ dfu_file_buf_len = 0;
+ dfu_file_buf_offset = 0;
+ }
+
+ /* Add to the current buffer. */
+ if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE)
+ *len = CONFIG_SYS_DFU_MAX_FILE_SIZE - dfu_file_buf_len;
+ memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len);
+ dfu_file_buf_len += *len;
+
+ if (dfu_file_buf_len == CONFIG_SYS_DFU_MAX_FILE_SIZE) {
+ ret = scsi_file_op(DFU_OP_WRITE, dfu, dfu_file_buf_offset, dfu_file_buf,
+ &dfu_file_buf_len);
+ dfu_file_buf_offset += dfu_file_buf_len;
+ dfu_file_buf_len = 0;
+ }
+
+ return ret;
+}
+
+static int scsi_file_buf_write_finish(struct dfu_entity *dfu)
+{
+ int ret = scsi_file_op(DFU_OP_WRITE, dfu, dfu_file_buf_offset, dfu_file_buf,
+ &dfu_file_buf_len);
+
+ /* Now that we're done */
+ dfu_file_buf_len = 0;
+ dfu_file_buf_offset = 0;
+
+ return ret;
+}
+
+int dfu_write_medium_scsi(struct dfu_entity *dfu, u64 offset, void *buf, long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = scsi_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+ break;
+ case DFU_FS_FAT:
+ case DFU_FS_EXT4:
+ ret = scsi_file_buf_write(dfu, offset, buf, len);
+ break;
+ case DFU_SCRIPT:
+ ret = run_command_list(buf, *len, 0);
+ break;
+ case DFU_SKIP:
+ ret = 0;
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+int dfu_flush_medium_scsi(struct dfu_entity *dfu)
+{
+ int ret = 0;
+
+ switch (dfu->layout) {
+ case DFU_FS_FAT:
+ case DFU_FS_EXT4:
+ ret = scsi_file_buf_write_finish(dfu);
+ break;
+ case DFU_SCRIPT:
+ /* script may have changed the dfu_alt_info */
+ dfu_reinit_needed = true;
+ break;
+ case DFU_RAW_ADDR:
+ case DFU_SKIP:
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+int dfu_get_medium_size_scsi(struct dfu_entity *dfu, u64 *size)
+{
+ int ret;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ *size = dfu->data.scsi.lba_size * dfu->data.scsi.lba_blk_size;
+ return 0;
+ case DFU_FS_FAT:
+ case DFU_FS_EXT4:
+ ret = scsi_file_op(DFU_OP_SIZE, dfu, 0, NULL, size);
+ if (ret < 0)
+ return ret;
+ return 0;
+ case DFU_SCRIPT:
+ case DFU_SKIP:
+ return 0;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ return -1;
+ }
+}
+
+static int scsi_file_buf_read(struct dfu_entity *dfu, u64 offset, void *buf, long *len)
+{
+ int ret;
+
+ if (offset == 0 || offset >= dfu_file_buf_offset + dfu_file_buf_len ||
+ offset + *len < dfu_file_buf_offset) {
+ u64 file_len = CONFIG_SYS_DFU_MAX_FILE_SIZE;
+
+ ret = scsi_file_op(DFU_OP_READ, dfu, offset, dfu_file_buf, &file_len);
+ if (ret < 0)
+ return ret;
+ dfu_file_buf_len = file_len;
+ dfu_file_buf_offset = offset;
+ }
+ if (offset + *len > dfu_file_buf_offset + dfu_file_buf_len)
+ return -EINVAL;
+
+ /* Add to the current buffer. */
+ memcpy(buf, dfu_file_buf + offset - dfu_file_buf_offset, *len);
+
+ return 0;
+}
+
+int dfu_read_medium_scsi(struct dfu_entity *dfu, u64 offset, void *buf, long *len)
+{
+ int ret = -1;
+
+ switch (dfu->layout) {
+ case DFU_RAW_ADDR:
+ ret = scsi_block_op(DFU_OP_READ, dfu, offset, buf, len);
+ break;
+ case DFU_FS_FAT:
+ case DFU_FS_EXT4:
+ ret = scsi_file_buf_read(dfu, offset, buf, len);
+ break;
+ default:
+ printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+ dfu_get_layout(dfu->layout));
+ }
+
+ return ret;
+}
+
+void dfu_free_entity_scsi(struct dfu_entity *dfu)
+{
+ if (dfu_file_buf) {
+ free(dfu_file_buf);
+ dfu_file_buf = NULL;
+ }
+}
+
+/*
+ * @param s Parameter string containing space-separated arguments:
+ * 1st:
+ * raw (raw read/write)
+ * fat (files)
+ * ext4 (^)
+ * part (partition image)
+ * 2nd and 3rd:
+ * lba_start and lba_size, for raw write
+ * scsi_dev and scsi_part, for filesystems and part
+ */
+int dfu_fill_entity_scsi(struct dfu_entity *dfu, char *devstr, char **argv, int argc)
+{
+ const char *entity_type;
+ ssize_t second_arg;
+ ssize_t third_arg = -1;
+ struct udevice *scsi;
+ struct blk_desc *blk_dev;
+ int ret;
+ char *s;
+
+ if (argc < 2) {
+ pr_err("Need at least one argument\n");
+ return -EINVAL;
+ }
+
+ dfu->data.scsi.lun = dectoul(devstr, &s);
+ if (*s)
+ return -EINVAL;
+
+ entity_type = argv[0];
+ /*
+ * Base 0 means we'll accept (prefixed with 0x or 0) base 16, 8,
+ * with default 10.
+ */
+ second_arg = simple_strtol(argv[1], &s, 0);
+ if (*s)
+ return -EINVAL;
+ if (argc >= 3) {
+ third_arg = simple_strtoul(argv[2], &s, 0);
+ if (*s)
+ return -EINVAL;
+ }
+
+ if (scsi_scan(false)) {
+ pr_err("Couldn't init scsi device.\n");
+ return -ENODEV;
+ }
+
+ ret = find_scsi_device(dfu->data.scsi.lun, &scsi);
+ if (ret < 0) {
+ pr_err("Couldn't find scsi device no. %d.\n", dfu->data.scsi.lun);
+ return -ENODEV;
+ }
+
+ blk_dev = scsi_get_blk_desc(scsi);
+ if (!blk_dev) {
+ pr_err("Couldn't get block device for scsi device no. %d.\n", dfu->data.scsi.lun);
+ return -ENODEV;
+ }
+
+ /* if it's NOT a raw write */
+ if (strcmp(entity_type, "raw")) {
+ dfu->data.scsi.dev = (second_arg != -1) ? second_arg : dfu->data.scsi.lun;
+ dfu->data.scsi.part = third_arg;
+ }
+
+ if (!strcmp(entity_type, "raw")) {
+ dfu->layout = DFU_RAW_ADDR;
+ dfu->data.scsi.lba_start = second_arg;
+ if (third_arg < 0) {
+ pr_err("raw requires two arguments\n");
+ return -EINVAL;
+ }
+ dfu->data.scsi.lba_size = third_arg;
+ dfu->data.scsi.lba_blk_size = blk_dev->blksz;
+
+ /*
+ * In case the size is zero (i.e. scsi raw 0x10 0),
+ * assume the user intends to use whole device.
+ */
+ if (third_arg == 0)
+ dfu->data.scsi.lba_size = blk_dev->lba;
+
+ } else if (!strcmp(entity_type, "part")) {
+ struct disk_partition partinfo;
+ int scsipart = second_arg;
+
+ if (third_arg >= 0) {
+ pr_err("part only accepts one argument\n");
+ return -EINVAL;
+ }
+
+ if (part_get_info(blk_dev, scsipart, &partinfo) != 0) {
+ pr_err("Couldn't find part #%d on scsi device #%d\n", scsipart,
+ dfu->data.scsi.lun);
+ return -ENODEV;
+ }
+
+ dfu->layout = DFU_RAW_ADDR;
+ dfu->data.scsi.lba_start = partinfo.start;
+ dfu->data.scsi.lba_size = partinfo.size;
+ dfu->data.scsi.lba_blk_size = partinfo.blksz;
+ } else if (!strcmp(entity_type, "fat")) {
+ dfu->layout = DFU_FS_FAT;
+ } else if (!strcmp(entity_type, "ext4")) {
+ dfu->layout = DFU_FS_EXT4;
+ } else if (!strcmp(entity_type, "skip")) {
+ dfu->layout = DFU_SKIP;
+ } else if (!strcmp(entity_type, "script")) {
+ dfu->layout = DFU_SCRIPT;
+ } else {
+ pr_err("Memory layout (%s) not supported!\n", entity_type);
+ return -ENODEV;
+ }
+
+ dfu->dev_type = DFU_DEV_SCSI;
+ dfu->get_medium_size = dfu_get_medium_size_scsi;
+ dfu->read_medium = dfu_read_medium_scsi;
+ dfu->write_medium = dfu_write_medium_scsi;
+ dfu->flush_medium = dfu_flush_medium_scsi;
+ dfu->inited = 0;
+ dfu->free_entity = dfu_free_entity_scsi;
+
+ /* Check if file buffer is ready */
+ if (!dfu_file_buf) {
+ dfu_file_buf = memalign(CONFIG_SYS_CACHELINE_SIZE, CONFIG_SYS_DFU_MAX_FILE_SIZE);
+ if (!dfu_file_buf) {
+ pr_err("Could not memalign 0x%x bytes\n", CONFIG_SYS_DFU_MAX_FILE_SIZE);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/fastboot/fb_getvar.c b/drivers/fastboot/fb_getvar.c
index 93cbd59..9c2ce65 100644
--- a/drivers/fastboot/fb_getvar.c
+++ b/drivers/fastboot/fb_getvar.c
@@ -230,7 +230,8 @@
if (r >= 0) {
r = fs_set_blk_dev_with_part(dev_desc, r);
if (r < 0)
- fastboot_fail("failed to set partition", response);
+ /* If we don't know then just default to raw */
+ fastboot_okay("raw", response);
else
fastboot_okay(fs_get_type_name(), response);
}
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index 50a6981..76fcd3f 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -219,6 +219,44 @@
val = readl(&at91_port->osr);
return val & mask;
}
+
+static bool at91_is_port_gpio(struct at91_port *at91_port, int offset)
+{
+ u32 mask, val;
+
+ mask = 1 << offset;
+ val = readl(&at91_port->psr);
+ return !!(val & mask);
+}
+
+static void at91_set_port_multi_drive(struct at91_port *at91_port, int offset, int is_on)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ if (is_on)
+ writel(mask, &at91_port->mder);
+ else
+ writel(mask, &at91_port->mddr);
+}
+
+static bool at91_get_port_multi_drive(struct at91_port *at91_port, int offset)
+{
+ u32 mask, val;
+
+ mask = 1 << offset;
+ val = readl(&at91_port->mdsr);
+ return !!(val & mask);
+}
+
+static bool at91_get_port_pullup(struct at91_port *at91_port, int offset)
+{
+ u32 mask, val;
+
+ mask = 1 << offset;
+ val = readl(&at91_port->pusr);
+ return !(val & mask);
+}
#endif
static void at91_set_port_input(struct at91_port *at91_port, int offset,
@@ -549,13 +587,68 @@
{
struct at91_port_priv *port = dev_get_priv(dev);
- /* GPIOF_FUNC is not implemented yet */
+ if (!at91_is_port_gpio(port->regs, offset))
+ return GPIOF_FUNC;
+
if (at91_get_port_output(port->regs, offset))
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
}
+static int at91_gpio_set_flags(struct udevice *dev, unsigned int offset,
+ ulong flags)
+{
+ struct at91_port_priv *port = dev_get_priv(dev);
+ ulong supported_mask;
+
+ supported_mask = GPIOD_OPEN_DRAIN | GPIOD_MASK_DIR | GPIOD_PULL_UP;
+ if (flags & ~supported_mask)
+ return -ENOTSUPP;
+
+ if (flags & GPIOD_IS_OUT) {
+ if (flags & GPIOD_OPEN_DRAIN)
+ at91_set_port_multi_drive(port->regs, offset, true);
+ else
+ at91_set_port_multi_drive(port->regs, offset, false);
+
+ at91_set_port_output(port->regs, offset, flags & GPIOD_IS_OUT_ACTIVE);
+
+ } else if (flags & GPIOD_IS_IN) {
+ at91_set_port_input(port->regs, offset, false);
+ }
+ if (flags & GPIOD_PULL_UP)
+ at91_set_port_pullup(port->regs, offset, true);
+
+ return 0;
+}
+
+static int at91_gpio_get_flags(struct udevice *dev, unsigned int offset,
+ ulong *flagsp)
+{
+ struct at91_port_priv *port = dev_get_priv(dev);
+ ulong dir_flags = 0;
+
+ if (at91_get_port_output(port->regs, offset)) {
+ dir_flags |= GPIOD_IS_OUT;
+
+ if (at91_get_port_multi_drive(port->regs, offset))
+ dir_flags |= GPIOD_OPEN_DRAIN;
+
+ if (at91_get_port_value(port->regs, offset))
+ dir_flags |= GPIOD_IS_OUT_ACTIVE;
+ } else {
+ dir_flags |= GPIOD_IS_IN;
+ }
+
+ if (at91_get_port_pullup(port->regs, offset))
+ dir_flags |= GPIOD_PULL_UP;
+
+ *flagsp = dir_flags;
+
+ return 0;
+}
+
static const char *at91_get_bank_name(uint32_t base_addr)
{
switch (base_addr) {
@@ -584,6 +677,8 @@
.get_value = at91_gpio_get_value,
.set_value = at91_gpio_set_value,
.get_function = at91_gpio_get_function,
+ .set_flags = at91_gpio_set_flags,
+ .get_flags = at91_gpio_get_flags,
};
static int at91_gpio_probe(struct udevice *dev)
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 0213271..da929c3 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -705,6 +705,9 @@
if (ops->set_flags) {
ret = ops->set_flags(dev, desc->offset, flags);
} else {
+ if (flags & GPIOD_MASK_PULL)
+ return -EINVAL;
+
if (flags & GPIOD_IS_OUT) {
bool value = flags & GPIOD_IS_OUT_ACTIVE;
diff --git a/drivers/gpio/imx_rgpio2p.c b/drivers/gpio/imx_rgpio2p.c
index fc1d418..7cf178f 100644
--- a/drivers/gpio/imx_rgpio2p.c
+++ b/drivers/gpio/imx_rgpio2p.c
@@ -231,7 +231,7 @@
.have_dual_base = true,
};
-static struct imx_rgpio2p_soc_data imx8ulp_data = {
+static struct imx_rgpio2p_soc_data imx8ulp_data __section(".data") = {
.have_dual_base = false,
};
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
index f2ef4e5..cd9f392 100644
--- a/drivers/gpio/qcom_pmic_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -69,6 +69,17 @@
#define REG_EN_CTL 0x46
#define REG_EN_CTL_ENABLE (1 << 7)
+/**
+ * pmic_gpio_match_data - platform specific configuration
+ *
+ * @PMIC_MATCH_READONLY: treat all GPIOs as readonly, don't attempt to configure them.
+ * This is a workaround for an unknown bug on some platforms where trying to write the
+ * GPIO configuration registers causes the board to hang.
+ */
+enum pmic_gpio_quirks {
+ QCOM_PMIC_QUIRK_READONLY = (1 << 0),
+};
+
struct qcom_pmic_gpio_data {
uint32_t pid; /* Peripheral ID on SPMI bus */
bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
@@ -117,8 +128,13 @@
{
struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
+ ulong quirks = dev_get_driver_data(dev);
int ret = 0;
+ /* Some PMICs don't like their GPIOs being configured */
+ if (quirks & QCOM_PMIC_QUIRK_READONLY)
+ return 0;
+
/* Disable the GPIO */
ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
REG_EN_CTL_ENABLE, 0);
@@ -262,6 +278,7 @@
{
struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
+ ulong quirks = dev_get_driver_data(dev);
struct udevice *child;
struct driver *drv;
int ret;
@@ -275,7 +292,7 @@
/* Bind the GPIO driver as a child of the PMIC. */
ret = device_bind_with_driver_data(dev, drv,
dev->name,
- 0, dev_ofnode(dev), &child);
+ quirks, dev_ofnode(dev), &child);
if (ret)
return log_msg_ret("bind", ret);
@@ -348,7 +365,7 @@
{ .compatible = "qcom,pms405-gpio" },
{ .compatible = "qcom,pm6125-gpio" },
{ .compatible = "qcom,pm8150-gpio" },
- { .compatible = "qcom,pm8550-gpio" },
+ { .compatible = "qcom,pm8550-gpio", .data = QCOM_PMIC_QUIRK_READONLY },
{ }
};
diff --git a/drivers/iommu/apple_dart.c b/drivers/iommu/apple_dart.c
index 3e9e7819..bfd4ad2 100644
--- a/drivers/iommu/apple_dart.c
+++ b/drivers/iommu/apple_dart.c
@@ -322,5 +322,5 @@
.ops = &apple_dart_ops,
.probe = apple_dart_probe,
.remove = apple_dart_remove,
- .flags = DM_FLAG_OS_PREPARE
+ .flags = DM_FLAG_OS_PREPARE | DM_FLAG_VITAL
};
diff --git a/drivers/iommu/qcom-hyp-smmu.c b/drivers/iommu/qcom-hyp-smmu.c
index 1b5a09b..c1b95bc 100644
--- a/drivers/iommu/qcom-hyp-smmu.c
+++ b/drivers/iommu/qcom-hyp-smmu.c
@@ -91,6 +91,8 @@
phys_addr_t base;
struct list_head devices;
struct udevice *dev;
+ /* SMMU is not needed when running in EL2 */
+ bool disable;
/* Read-once config */
int num_cb;
@@ -134,7 +136,7 @@
int count = ofnode_parse_phandle_with_args(node, "iommus",
"#iommu-cells", 0, 0, &args);
- if (count < 0 || args.args[0] == 0) {
+ if (count < 0) {
printf("Error: %s: iommus property not found or wrong number of cells\n",
__func__);
return -EINVAL;
@@ -277,6 +279,9 @@
if (WARN_ON(!priv))
return -EINVAL;
+ if (priv->disable)
+ return 0;
+
mdev = alloc_dev(dev);
if (IS_ERR(mdev) && PTR_ERR(mdev) != -EEXIST) {
printf("%s: %s Couldn't create mmu context\n", __func__,
@@ -348,6 +353,8 @@
priv->base = dev_read_addr(dev);
INIT_LIST_HEAD(&priv->devices);
+ priv->disable = current_el() > 1;
+
/* Read SMMU config */
val = gr0_readl(priv, ARM_SMMU_GR0_ID0);
priv->num_smr = FIELD_GET(ARM_SMMU_ID0_NUMSMRG, val);
diff --git a/drivers/led/led-uclass.c b/drivers/led/led-uclass.c
index 05e0990..7607505 100644
--- a/drivers/led/led-uclass.c
+++ b/drivers/led/led-uclass.c
@@ -232,16 +232,24 @@
#endif
#endif
+static const char *led_get_label(ofnode node)
+{
+ const char *label;
+
+ label = ofnode_read_string(node, "label");
+ if (!label && !ofnode_read_string(node, "compatible"))
+ label = ofnode_get_name(node);
+
+ return label;
+}
+
static int led_post_bind(struct udevice *dev)
{
struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev);
const char *default_state;
if (!uc_plat->label)
- uc_plat->label = dev_read_string(dev, "label");
-
- if (!uc_plat->label && !dev_read_string(dev, "compatible"))
- uc_plat->label = ofnode_get_name(dev_ofnode(dev));
+ uc_plat->label = led_get_label(dev_ofnode(dev));
uc_plat->default_state = LEDST_COUNT;
@@ -300,15 +308,21 @@
static int led_init(struct uclass *uc)
{
struct led_uc_priv *priv = uclass_get_priv(uc);
+ ofnode led_node;
+ int ret;
#ifdef CONFIG_LED_BOOT
- priv->boot_led_label = ofnode_options_read_str("boot-led");
- priv->boot_led_period = ofnode_options_read_int("boot-led-period", 250);
+ ret = ofnode_options_get_by_phandle("boot-led", &led_node);
+ if (!ret)
+ priv->boot_led_label = led_get_label(led_node);
+ priv->boot_led_period = ofnode_options_read_int("boot-led-period-ms", 250);
#endif
#ifdef CONFIG_LED_ACTIVITY
- priv->activity_led_label = ofnode_options_read_str("activity-led");
- priv->activity_led_period = ofnode_options_read_int("activity-led-period",
+ ret = ofnode_options_get_by_phandle("activity-led", &led_node);
+ if (!ret)
+ priv->activity_led_label = led_get_label(led_node);
+ priv->activity_led_period = ofnode_options_read_int("activity-led-period-ms",
250);
#endif
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index 10f0173..3cb38aa 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -264,6 +264,13 @@
.offset_len = 2,
};
+static const struct i2c_eeprom_drv_data st24256e_wlp_data = {
+ .size = 64,
+ .pagesize = 64,
+ .addr_offset_mask = 0,
+ .offset_len = 2,
+};
+
static const struct i2c_eeprom_drv_data atmel24c512_data = {
.size = 65536,
.pagesize = 64,
@@ -287,6 +294,7 @@
{ .compatible = "atmel,24c128", (ulong)&atmel24c128_data },
{ .compatible = "atmel,24c256", (ulong)&atmel24c256_data },
{ .compatible = "atmel,24c512", (ulong)&atmel24c512_data },
+ { .compatible = "st,24256e-wl", (ulong)&st24256e_wlp_data },
{ }
};
diff --git a/drivers/misc/imx8/scu_api.c b/drivers/misc/imx8/scu_api.c
index 591d71b..a40c8ba 100644
--- a/drivers/misc/imx8/scu_api.c
+++ b/drivers/misc/imx8/scu_api.c
@@ -951,6 +951,26 @@
return ret;
}
+int sc_timer_control_siemens_pmic_wdog(sc_ipc_t ipc, u8 cmd)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_TIMER;
+ RPC_FUNC(&msg) = (u8)TIMER_FUNC_CTRL_SIEMENS_PMIC_WDOG;
+ RPC_U8(&msg, 0U) = (u8)cmd;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: res:%d\n", __func__, RPC_R8(&msg));
+
+ return ret;
+}
+
int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd,
sc_faddr_t addr)
{
diff --git a/drivers/misc/k3_avs.c b/drivers/misc/k3_avs.c
index 99a18a1..0774e0a 100644
--- a/drivers/misc/k3_avs.c
+++ b/drivers/misc/k3_avs.c
@@ -121,6 +121,11 @@
if (!vd->supply)
return -ENODEV;
+ if (!volt) {
+ dev_err(priv->dev, "No efuse found for opp_%d\n", opp_id);
+ return -EINVAL;
+ }
+
vd->opp = opp_id;
vd->flags |= VD_FLAG_INIT_DONE;
@@ -189,6 +194,33 @@
printf("No matching OPP found for freq %d.\n", freq);
+ return -EINVAL;
+}
+
+/**
+ * k3_check_opp: Check for presence of opp efuse
+ * @dev: AVS device
+ * @vdd_id: voltage domain ID
+ * @opp_id: opp id to check if voltage is present
+ *
+ * Checks to see if an opp has voltage. k3_avs probe will populate
+ * voltage data if efuse is present. Returns 0 if data is valid.
+ */
+int k3_avs_check_opp(struct udevice *dev, int vdd_id, int opp_id)
+{
+ struct k3_avs_privdata *priv = dev_get_priv(dev);
+ struct vd_data *vd;
+ int volt;
+
+ vd = get_vd(priv, vdd_id);
+ if (!vd)
+ return -EINVAL;
+
+ volt = vd->opps[opp_id].volt;
+ if (volt)
+ return 0;
+
+ printf("No efuse found for opp_%d\n", opp_id);
return -EINVAL;
}
@@ -501,6 +533,10 @@
.dev_id = 202, /* J721E_DEV_A72SS0_CORE0 */
.clk_id = 2, /* ARM clock */
.opps = {
+ [AM6_OPP_LOW] = {
+ .volt = 0, /* voltage TBD after OPP fuse reading */
+ .freq = 1000000000,
+ },
[AM6_OPP_NOM] = {
.volt = 880000, /* TBD in DM */
.freq = 2000000000,
diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 4e5c932..27bb705 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -15,6 +15,7 @@
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/bitops.h>
+#include <power/regulator.h>
/* Non-standard registers needed for SDHCI startup */
#define SDCC_MCI_POWER 0x0
@@ -43,6 +44,7 @@
struct sdhci_host host;
void *base;
struct clk_bulk clks;
+ struct udevice *vqmmc;
};
struct msm_sdhc_variant_info {
@@ -163,6 +165,16 @@
if (ret)
return ret;
+ /* Get the vqmmc regulator and enable it if available */
+ device_get_supply_regulator(dev, "vqmmc-supply", &prv->vqmmc);
+ if (prv->vqmmc) {
+ ret = regulator_set_enable_if_allowed(prv->vqmmc, true);
+ if (ret) {
+ printf("Failed to enable the VQMMC regulator\n");
+ return ret;
+ }
+ }
+
var_info = (void *)dev_get_driver_data(dev);
if (!var_info->mci_removed) {
ret = msm_sdc_mci_init(prv);
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index c345fc1..609bdff 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -133,36 +133,12 @@
help
Enable support for broadcom nand driver on bcm6368.
-config NAND_BRCMNAND_6753
- bool "Support Broadcom NAND controller on bcm6753"
- depends on NAND_BRCMNAND && BCM6855
- help
- Enable support for broadcom nand driver on bcm6753.
-
-config NAND_BRCMNAND_68360
- bool "Support Broadcom NAND controller on bcm68360"
- depends on NAND_BRCMNAND && BCM6856
- help
- Enable support for broadcom nand driver on bcm68360.
-
config NAND_BRCMNAND_6838
bool "Support Broadcom NAND controller on bcm6838"
depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838
help
Enable support for broadcom nand driver on bcm6838.
-config NAND_BRCMNAND_6858
- bool "Support Broadcom NAND controller on bcm6858"
- depends on NAND_BRCMNAND && BCM6858
- help
- Enable support for broadcom nand driver on bcm6858.
-
-config NAND_BRCMNAND_63158
- bool "Support Broadcom NAND controller on bcm63158"
- depends on NAND_BRCMNAND && BCM63158
- help
- Enable support for broadcom nand driver on bcm63158.
-
config NAND_BRCMNAND_IPROC
bool "Support Broadcom NAND controller on the iproc family"
depends on NAND_BRCMNAND
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 817fab4..25f187a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2205,7 +2205,6 @@
static int atmel_nand_controller_probe(struct udevice *dev)
{
const struct atmel_nand_controller_caps *caps;
- struct udevice *pmecc_dev;
caps = (struct atmel_nand_controller_caps *)dev_get_driver_data(dev);
if (!caps) {
@@ -2213,12 +2212,6 @@
return -EINVAL;
}
- /* Probe pmecc driver */
- if (uclass_get_device(UCLASS_MTD, 1, &pmecc_dev)) {
- printf("%s: get device fail\n", __func__);
- return -EINVAL;
- }
-
return caps->ops->probe(dev, caps);
}
diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c
index 51f6bd2..e500a0f 100644
--- a/drivers/mtd/nand/raw/atmel/pmecc.c
+++ b/drivers/mtd/nand/raw/atmel/pmecc.c
@@ -913,6 +913,7 @@
ret = ofnode_parse_phandle_with_args(userdev->node_,
"ecc-engine",
NULL, 0, 0, &args);
+ /* Probe pmecc driver */
ret = uclass_get_device_by_ofnode(UCLASS_MTD, args.node, &pdev);
if (ret)
return NULL;
diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
index 24d0d56..4fba5c1 100644
--- a/drivers/mtd/nand/raw/brcmnand/Makefile
+++ b/drivers/mtd/nand/raw/brcmnand/Makefile
@@ -1,11 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_NAND_BRCMNAND_6368) += bcm6368_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_63158) += bcm63158_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_6753) += bcm6753_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_68360) += bcm68360_nand.o
obj-$(CONFIG_NAND_BRCMNAND_6838) += bcm6838_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_6858) += bcm6858_nand.o
obj-$(CONFIG_NAND_BRCMNAND_BCMBCA) += bcmbca_nand.o
obj-$(CONFIG_NAND_BRCMNAND_IPROC) += iproc_nand.o
obj-$(CONFIG_NAND_BRCMNAND) += brcmnand.o
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
deleted file mode 100644
index 3f59fbb..0000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm63158_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM63158_NAND_INT 0x00
-#define BCM63158_NAND_STATUS_SHIFT 0
-#define BCM63158_NAND_STATUS_MASK (0xfff << BCM63158_NAND_STATUS_SHIFT)
-
-#define BCM63158_NAND_INT_EN 0x04
-#define BCM63158_NAND_ENABLE_SHIFT 0
-#define BCM63158_NAND_ENABLE_MASK (0xffff << BCM63158_NAND_ENABLE_SHIFT)
-
-enum {
- BCM63158_NP_READ = BIT(0),
- BCM63158_BLOCK_ERASE = BIT(1),
- BCM63158_COPY_BACK = BIT(2),
- BCM63158_PAGE_PGM = BIT(3),
- BCM63158_CTRL_READY = BIT(4),
- BCM63158_DEV_RBPIN = BIT(5),
- BCM63158_ECC_ERR_UNC = BIT(6),
- BCM63158_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm63158_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm63158_nand_soc *priv =
- container_of(soc, struct bcm63158_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM63158_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM63158_CTRL_READY << BCM63158_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM63158_NAND_STATUS_MASK;
- val |= BCM63158_CTRL_READY << BCM63158_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm63158_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm63158_nand_soc *priv =
- container_of(soc, struct bcm63158_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM63158_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM63158_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM63158_CTRL_READY << BCM63158_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM63158_CTRL_READY << BCM63158_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm63158_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm63158_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm63158_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm63158_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM63158_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM63158_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm63158_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm63158",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm63158_nand) = {
- .name = "bcm63158-nand",
- .id = UCLASS_MTD,
- .of_match = bcm63158_nand_dt_ids,
- .probe = bcm63158_nand_probe,
- .priv_auto = sizeof(struct bcm63158_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm63158_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
deleted file mode 100644
index a101222..0000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-
-#include "brcmnand.h"
-
-struct bcm6753_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM6753_NAND_INT 0x00
-#define BCM6753_NAND_STATUS_SHIFT 0
-#define BCM6753_NAND_STATUS_MASK (0xfff << BCM6753_NAND_STATUS_SHIFT)
-
-#define BCM6753_NAND_INT_EN 0x04
-#define BCM6753_NAND_ENABLE_SHIFT 0
-#define BCM6753_NAND_ENABLE_MASK (0xffff << BCM6753_NAND_ENABLE_SHIFT)
-
-enum {
- BCM6753_NP_READ = BIT(0),
- BCM6753_BLOCK_ERASE = BIT(1),
- BCM6753_COPY_BACK = BIT(2),
- BCM6753_PAGE_PGM = BIT(3),
- BCM6753_CTRL_READY = BIT(4),
- BCM6753_DEV_RBPIN = BIT(5),
- BCM6753_ECC_ERR_UNC = BIT(6),
- BCM6753_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm6753_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm6753_nand_soc *priv =
- container_of(soc, struct bcm6753_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6753_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM6753_CTRL_READY << BCM6753_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM6753_NAND_STATUS_MASK;
- val |= BCM6753_CTRL_READY << BCM6753_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm6753_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm6753_nand_soc *priv =
- container_of(soc, struct bcm6753_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6753_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM6753_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM6753_CTRL_READY << BCM6753_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM6753_CTRL_READY << BCM6753_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm6753_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm6753_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm6753_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm6753_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM6753_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM6753_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm6753_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm6753",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm6753_nand) = {
- .name = "bcm6753-nand",
- .id = UCLASS_MTD,
- .of_match = bcm6753_nand_dt_ids,
- .probe = bcm6753_nand_probe,
- .priv_auto = sizeof(struct bcm6753_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm6753_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
deleted file mode 100644
index 385642d..0000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm68360_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM68360_NAND_INT 0x00
-#define BCM68360_NAND_STATUS_SHIFT 0
-#define BCM68360_NAND_STATUS_MASK (0xfff << BCM68360_NAND_STATUS_SHIFT)
-
-#define BCM68360_NAND_INT_EN 0x04
-#define BCM68360_NAND_ENABLE_SHIFT 0
-#define BCM68360_NAND_ENABLE_MASK (0xffff << BCM68360_NAND_ENABLE_SHIFT)
-
-enum {
- BCM68360_NP_READ = BIT(0),
- BCM68360_BLOCK_ERASE = BIT(1),
- BCM68360_COPY_BACK = BIT(2),
- BCM68360_PAGE_PGM = BIT(3),
- BCM68360_CTRL_READY = BIT(4),
- BCM68360_DEV_RBPIN = BIT(5),
- BCM68360_ECC_ERR_UNC = BIT(6),
- BCM68360_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm68360_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm68360_nand_soc *priv =
- container_of(soc, struct bcm68360_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM68360_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM68360_CTRL_READY << BCM68360_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM68360_NAND_STATUS_MASK;
- val |= BCM68360_CTRL_READY << BCM68360_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm68360_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm68360_nand_soc *priv =
- container_of(soc, struct bcm68360_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM68360_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM68360_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM68360_CTRL_READY << BCM68360_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM68360_CTRL_READY << BCM68360_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm68360_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm68360_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm68360_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm68360_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM68360_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM68360_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm68360_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm68360",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm68360_nand) = {
- .name = "bcm68360-nand",
- .id = UCLASS_MTD,
- .of_match = bcm68360_nand_dt_ids,
- .probe = bcm68360_nand_probe,
- .priv_auto = sizeof(struct bcm68360_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm68360_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
deleted file mode 100644
index 564c678..0000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm6858_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM6858_NAND_INT 0x00
-#define BCM6858_NAND_STATUS_SHIFT 0
-#define BCM6858_NAND_STATUS_MASK (0xfff << BCM6858_NAND_STATUS_SHIFT)
-
-#define BCM6858_NAND_INT_EN 0x04
-#define BCM6858_NAND_ENABLE_SHIFT 0
-#define BCM6858_NAND_ENABLE_MASK (0xffff << BCM6858_NAND_ENABLE_SHIFT)
-
-enum {
- BCM6858_NP_READ = BIT(0),
- BCM6858_BLOCK_ERASE = BIT(1),
- BCM6858_COPY_BACK = BIT(2),
- BCM6858_PAGE_PGM = BIT(3),
- BCM6858_CTRL_READY = BIT(4),
- BCM6858_DEV_RBPIN = BIT(5),
- BCM6858_ECC_ERR_UNC = BIT(6),
- BCM6858_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm6858_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm6858_nand_soc *priv =
- container_of(soc, struct bcm6858_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6858_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM6858_CTRL_READY << BCM6858_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM6858_NAND_STATUS_MASK;
- val |= BCM6858_CTRL_READY << BCM6858_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm6858_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm6858_nand_soc *priv =
- container_of(soc, struct bcm6858_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6858_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM6858_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM6858_CTRL_READY << BCM6858_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM6858_CTRL_READY << BCM6858_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm6858_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm6858_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm6858_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm6858_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM6858_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM6858_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm6858_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm6858",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm6858_nand) = {
- .name = "bcm6858-nand",
- .id = UCLASS_MTD,
- .of_match = bcm6858_nand_dt_ids,
- .probe = bcm6858_nand_probe,
- .priv_auto = sizeof(struct bcm6858_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm6858_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 749553c..ef492e6 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1071,8 +1071,8 @@
if ((val & mask) == expected_val)
return 0;
- dev_warn(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
- expected_val, val & mask);
+ dev_err(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
+ expected_val, val & mask);
return -ETIMEDOUT;
}
@@ -2032,7 +2032,7 @@
return err;
}
- dev_dbg(ctrl->dev, "uncorrectable error at 0x%llx\n",
+ dev_err(ctrl->dev, "uncorrectable error at 0x%llx\n",
(unsigned long long)err_addr);
mtd->ecc_stats.failed++;
/* NAND layer expects zero on ECC errors */
@@ -2793,9 +2793,17 @@
nand_hw_control_init(&ctrl->controller);
INIT_LIST_HEAD(&ctrl->host_list);
+#ifdef CONFIG_NAND_BRCMNAND_BCMBCA
+ /*
+ * BCMBCA platform does not use non-linux parameter-page-big-endian dts property,
+ * param page data is little endian
+ */
+ ctrl->parameter_page_big_endian = 0;
+#else
/* Is parameter page in big endian ? */
ctrl->parameter_page_big_endian =
dev_read_u32_default(dev, "parameter-page-big-endian", 1);
+#endif
/* NAND register range */
#ifndef __UBOOT__
diff --git a/drivers/mtd/ubispl/ubispl.c b/drivers/mtd/ubispl/ubispl.c
index 90a7c4c..9face5f 100644
--- a/drivers/mtd/ubispl/ubispl.c
+++ b/drivers/mtd/ubispl/ubispl.c
@@ -113,7 +113,7 @@
crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC);
if (be32_to_cpu(vtbl[i].crc) != crc) {
- ubi_err("bad CRC at record %u: %#08x, not %#08x",
+ ubi_err("bad CRC at record %u: #%08x, not #%08x",
i, crc, be32_to_cpu(vtbl[i].crc));
ubi_dump_vtbl_record(&vtbl[i], i);
return 1;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index d6d5cb5..eca681b 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -160,7 +160,7 @@
}
}
-static void fec_mii_setspeed(struct ethernet_regs *eth)
+static void fec_mii_setspeed(struct udevice *dev, struct ethernet_regs *eth)
{
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
@@ -182,7 +182,7 @@
u32 hold;
int ret;
- ret = fec_get_clk_rate(NULL, 0);
+ ret = fec_get_clk_rate(dev, 0);
if (ret < 0) {
printf("Can't find FEC0 clk rate: %d\n", ret);
return;
@@ -581,7 +581,7 @@
fec_reg_setup(fec);
if (fec->xcv_type != SEVENWIRE)
- fec_mii_setspeed(fec->bus->priv);
+ fec_mii_setspeed(dev, fec->bus->priv);
/* Set Opcode/Pause Duration Register */
writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */
@@ -996,7 +996,7 @@
free(fec->tbd_base);
}
-struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id)
+struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id)
{
struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
struct mii_dev *bus;
@@ -1018,7 +1018,7 @@
free(bus);
return NULL;
}
- fec_mii_setspeed(eth);
+ fec_mii_setspeed(dev, eth);
return bus;
}
@@ -1354,10 +1354,10 @@
if (!bus) {
dm_mii_bus = false;
#ifdef CONFIG_FEC_MXC_MDIO_BASE
- bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE,
+ bus = fec_get_miibus(dev, (ulong)CONFIG_FEC_MXC_MDIO_BASE,
dev_seq(dev));
#else
- bus = fec_get_miibus((ulong)priv->eth, dev_seq(dev));
+ bus = fec_get_miibus(dev, (ulong)priv->eth, dev_seq(dev));
#endif
}
if (!bus) {
diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index f1401d2..231764e 100644
--- a/drivers/net/ravb.c
+++ b/drivers/net/ravb.c
@@ -649,7 +649,6 @@
int ravb_of_to_plat(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
- const fdt32_t *cell;
pdata->iobase = dev_read_addr(dev);
@@ -657,10 +656,7 @@
if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
return -EINVAL;
- pdata->max_speed = 1000;
- cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL);
- if (cell)
- pdata->max_speed = fdt32_to_cpu(*cell);
+ pdata->max_speed = dev_read_u32_default(dev, "max-speed", 1000);
sprintf(bb_miiphy_buses[0].name, dev->name);
diff --git a/drivers/phy/qcom/phy-qcom-qmp-ufs.c b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
index 8908a34..5c90d60 100644
--- a/drivers/phy/qcom/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
@@ -84,12 +84,6 @@
QPHY_LAYOUT_SIZE
};
-static const unsigned int ufsphy_v2_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_START_CTRL] = QPHY_V2_PCS_UFS_PHY_START,
- [QPHY_PCS_READY_STATUS] = QPHY_V2_PCS_UFS_READY_STATUS,
- [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
-};
-
static const unsigned int ufsphy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = QPHY_V3_PCS_UFS_PHY_START,
[QPHY_PCS_READY_STATUS] = QPHY_V3_PCS_UFS_READY_STATUS,
@@ -189,6 +183,29 @@
QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
};
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_tx[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x75),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_rx[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x6c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
+};
+
static const struct qmp_ufs_init_tbl sm8150_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
@@ -461,6 +478,112 @@
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
};
+
+static const struct qmp_ufs_init_tbl sc7280_ufsphy_tx[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x35),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_ufs_init_tbl sc7280_ufsphy_rx[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_ufs_init_tbl sc7280_ufsphy_pcs[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_PLL_CNTL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
+};
+
+static const struct qmp_ufs_init_tbl sc7280_ufsphy_hs_g4_rx[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x2c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x0f),
+};
+
struct qmp_ufs_offsets {
u16 serdes;
u16 pcs;
@@ -623,6 +746,44 @@
.no_pcs_sw_reset = true,
};
+static const struct qmp_ufs_cfg sm8150_ufsphy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_ufs_offsets,
+
+ .tbls = {
+ .serdes = sm8150_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8150_ufsphy_serdes),
+ .tx = sm8150_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8150_ufsphy_tx),
+ .rx = sm8150_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8150_ufsphy_rx),
+ .pcs = sm8150_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8150_ufsphy_pcs),
+ },
+ .tbls_hs_b = {
+ .serdes = sm8150_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+ },
+ .tbls_hs_g4 = {
+ .tx = sm8150_ufsphy_hs_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx),
+ .rx = sm8150_ufsphy_hs_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx),
+ .pcs = sm8150_ufsphy_hs_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+ },
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_ufs_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_ufs_vreg_l),
+ .reset_list = qmp_ufs_reset_l,
+ .num_resets = ARRAY_SIZE(qmp_ufs_reset_l),
+ .regs = ufsphy_v4_regs_layout,
+
+ .no_pcs_sw_reset = false,
+};
+
static const struct qmp_ufs_cfg sm8250_ufsphy_cfg = {
.lanes = 2,
@@ -713,6 +874,41 @@
.no_pcs_sw_reset = false,
};
+
+static const struct qmp_ufs_cfg sc7280_ufsphy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_ufs_offsets,
+
+ .tbls = {
+ .serdes = sm8150_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8150_ufsphy_serdes),
+ .tx = sc7280_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sc7280_ufsphy_tx),
+ .rx = sc7280_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sc7280_ufsphy_rx),
+ .pcs = sc7280_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sc7280_ufsphy_pcs),
+ },
+ .tbls_hs_b = {
+ .serdes = sm8150_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+ },
+ .tbls_hs_g4 = {
+ .tx = sm8250_ufsphy_hs_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
+ .rx = sc7280_ufsphy_hs_g4_rx,
+ .rx_num = ARRAY_SIZE(sc7280_ufsphy_hs_g4_rx),
+ .pcs = sm8150_ufsphy_hs_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+ },
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_ufs_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_ufs_vreg_l),
+ .regs = ufsphy_v4_regs_layout,
+};
+
static void qmp_ufs_configure_lane(void __iomem *base,
const struct qmp_ufs_init_tbl tbl[],
int num,
@@ -1100,9 +1296,11 @@
static const struct udevice_id qmp_ufs_ids[] = {
{ .compatible = "qcom,sdm845-qmp-ufs-phy", .data = (ulong)&sdm845_ufsphy_cfg },
+ { .compatible = "qcom,sm8150-qmp-ufs-phy", .data = (ulong)&sm8150_ufsphy_cfg },
{ .compatible = "qcom,sm8250-qmp-ufs-phy", .data = (ulong)&sm8250_ufsphy_cfg },
{ .compatible = "qcom,sm8550-qmp-ufs-phy", .data = (ulong)&sm8550_ufsphy_cfg },
{ .compatible = "qcom,sm8650-qmp-ufs-phy", .data = (ulong)&sm8650_ufsphy_cfg },
+ { .compatible = "qcom,sc7280-qmp-ufs-phy", .data = (ulong)&sc7280_ufsphy_cfg, },
{ }
};
diff --git a/drivers/pinctrl/exynos/pinctrl-exynos.c b/drivers/pinctrl/exynos/pinctrl-exynos.c
index b393127..b37282f 100644
--- a/drivers/pinctrl/exynos/pinctrl-exynos.c
+++ b/drivers/pinctrl/exynos/pinctrl-exynos.c
@@ -114,8 +114,8 @@
int exynos_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
struct exynos_pinctrl_priv *priv = dev_get_priv(dev);
- unsigned int count, idx;
- unsigned int pinvals[PINCFG_TYPE_NUM];
+ int count;
+ unsigned int idx, pinvals[PINCFG_TYPE_NUM];
/*
* refer to the following document for the pinctrl bindings
diff --git a/drivers/pinctrl/nxp/pinctrl-imx93.c b/drivers/pinctrl/nxp/pinctrl-imx93.c
index 9a5b9de..8d8ffec 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx93.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx93.c
@@ -22,6 +22,7 @@
static const struct udevice_id imx93_pinctrl_match[] = {
{ .compatible = "fsl,imx93-iomuxc", .data = (ulong)&imx93_pinctrl_soc_info },
+ { .compatible = "fsl,imx91-iomuxc", .data = (ulong)&imx93_pinctrl_soc_info },
{ /* sentinel */ }
};
diff --git a/drivers/pinctrl/renesas/rzg2l-pfc.c b/drivers/pinctrl/renesas/rzg2l-pfc.c
index e88ec1c..3c751e9 100644
--- a/drivers/pinctrl/renesas/rzg2l-pfc.c
+++ b/drivers/pinctrl/renesas/rzg2l-pfc.c
@@ -180,7 +180,7 @@
RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
- RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN),
RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
@@ -189,7 +189,7 @@
RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN),
RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
@@ -381,7 +381,7 @@
}
switch (param) {
- case PIN_CONFIG_INPUT_ENABLE: {
+ case PIN_CONFIG_INPUT_ENABLE:
if (!(cfg & PIN_CFG_IEN)) {
dev_err(dev, "pin does not support IEN\n");
return -EINVAL;
@@ -391,21 +391,12 @@
port_offset, pin, argument);
rzg2l_rmw_pin_config(data, IEN(port_offset), pin, IEN_MASK, !!argument);
break;
- }
case PIN_CONFIG_POWER_SOURCE: {
- u32 pwr_reg = 0x0;
+ bool support_2500 = false;
+ u32 pwr_reg;
+ u32 value;
- /* argument is in mV */
- if (argument != 1800 && argument != 3300) {
- dev_err(dev, "Invalid mV %u\n", argument);
- return -EINVAL;
- }
-
- /*
- * TODO: PIN_CFG_IO_VMC_ETH0 & PIN_CFG_IO_VMC_ETH1 will be
- * handled when the RZ/G2L Ethernet driver is added.
- */
if (cfg & PIN_CFG_IO_VMC_SD0) {
dev_dbg(dev, "port off %u:%u set SD_CH 0 PVDD=%u\n",
port_offset, pin, argument);
@@ -418,13 +409,68 @@
dev_dbg(dev, "port off %u:%u set QSPI PVDD=%u\n",
port_offset, pin, argument);
pwr_reg = QSPI;
+ } else if (cfg & PIN_CFG_IO_VMC_ETH0) {
+ dev_dbg(dev, "port off %u:%u set ETH0 PVDD=%u\n",
+ port_offset, pin, argument);
+ pwr_reg = ETH_POC(0);
+ support_2500 = true;
+ } else if (cfg & PIN_CFG_IO_VMC_ETH1) {
+ dev_dbg(dev, "port off %u:%u set ETH1 PVDD=%u\n",
+ port_offset, pin, argument);
+ pwr_reg = ETH_POC(1);
+ support_2500 = true;
} else {
- dev_dbg(dev, "pin power source is not selectable\n");
+ dev_dbg(dev, "port off %u:%u PVDD is not selectable\n",
+ port_offset, pin);
+ return -EINVAL;
+ }
+
+ /* argument is in mV */
+ switch (argument) {
+ case 1800:
+ value = PVDD_1800;
+ break;
+ case 3300:
+ value = PVDD_3300;
+ break;
+ case 2500:
+ if (support_2500) {
+ value = PVDD_2500;
+ break;
+ }
+ fallthrough;
+ default:
+ dev_err(dev, "Invalid mV %u\n", argument);
return -EINVAL;
}
+ writel(value, data->base + pwr_reg);
+ break;
+ }
+
+ case PIN_CONFIG_OUTPUT_ENABLE: {
+ u8 ch;
+
+ if (!(cfg & PIN_CFG_OEN)) {
+ dev_err(dev, "pin does not support OEN\n");
+ return -EINVAL;
+ }
+
+ /*
+ * We can determine which Ethernet interface we're dealing with from
+ * the caps.
+ */
+ if (cfg & PIN_CFG_IO_VMC_ETH0)
+ ch = 0;
+ else /* PIN_CFG_IO_VMC_ETH1 */
+ ch = 1;
+
+ dev_dbg(dev, "set ETH%u TXC OEN=%u\n", ch, argument);
+ if (argument)
+ clrbits_8(data->base + ETH_MODE, BIT(ch));
+ else
+ setbits_8(data->base + ETH_MODE, BIT(ch));
+
- writel((argument == 1800) ? PVDD_1800 : PVDD_3300,
- data->base + pwr_reg);
break;
}
@@ -521,6 +567,7 @@
static const struct pinconf_param rzg2l_pinconf_params[] = {
{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
+ { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "power-source", PIN_CONFIG_POWER_SOURCE, 3300 /* mV */ },
};
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index decd080..09567eb 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -9,6 +9,7 @@
#include <errno.h>
#include <dm.h>
#include <log.h>
+#include <dm/device_compat.h>
#include <dm/uclass-internal.h>
#include <linux/delay.h>
#include <power/pmic.h>
@@ -43,8 +44,7 @@
{
int delay = DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
- debug("regulator %s: delay %u us (%d uV -> %d uV)\n", dev->name, delay,
- old_uV, new_uV);
+ dev_dbg(dev, "delay %u us (%d uV -> %d uV)\n", delay, old_uV, new_uV);
udelay(delay);
}
@@ -263,7 +263,7 @@
for (ret = uclass_find_first_device(UCLASS_REGULATOR, &dev); dev;
ret = uclass_find_next_device(&dev)) {
if (ret) {
- debug("regulator %s, ret=%d\n", dev->name, ret);
+ dev_dbg(dev, "ret=%d\n", ret);
continue;
}
@@ -439,16 +439,15 @@
/* Regulator's mandatory constraint */
uc_pdata->name = dev_read_string(dev, property);
if (!uc_pdata->name) {
- debug("%s: dev '%s' has no property '%s'\n",
- __func__, dev->name, property);
+ dev_dbg(dev, "has no property '%s'\n", property);
uc_pdata->name = dev_read_name(dev);
if (!uc_pdata->name)
return -EINVAL;
}
if (!regulator_name_is_unique(dev, uc_pdata->name)) {
- debug("'%s' of dev: '%s', has nonunique value: '%s\n",
- property, dev->name, uc_pdata->name);
+ dev_err(dev, "'%s' has nonunique value: '%s\n",
+ property, uc_pdata->name);
return -EINVAL;
}
diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index 525b6d5..6e9202b 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -216,9 +216,6 @@
req_type = readl(ddrss->ddrss_ctrl_mmr +
CTRLMMR_DDR4_FSP_CLKCHNG_REQ_OFFS + ddrss->instance * 0x10) & 0x03;
- debug("%s: received freq change req: req type = %d, req no. = %d, instance = %d\n",
- __func__, req_type, counter, ddrss->instance);
-
if (req_type == 1)
clk_set_rate(&ddrss->ddr_clk, ddrss->ddr_freq1);
else if (req_type == 2)
@@ -245,8 +242,6 @@
{
struct k3_ddrss_desc *ddrss = (struct k3_ddrss_desc *)pd->ddr_instance;
- debug("--->>> LPDDR4 Initialization is in progress ... <<<---\n");
-
switch (ddrss->dram_class) {
case DENALI_CTL_0_DRAM_CLASS_DDR4:
break;
diff --git a/drivers/remoteproc/rproc-elf-loader.c b/drivers/remoteproc/rproc-elf-loader.c
index ab1836b..0b3941b 100644
--- a/drivers/remoteproc/rproc-elf-loader.c
+++ b/drivers/remoteproc/rproc-elf-loader.c
@@ -6,6 +6,7 @@
#include <dm.h>
#include <elf.h>
#include <log.h>
+#include <mapmem.h>
#include <remoteproc.h>
#include <asm/cache.h>
#include <dm/device_compat.h>
@@ -180,6 +181,7 @@
for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
void *dst = (void *)(uintptr_t)phdr->p_paddr;
void *src = (void *)addr + phdr->p_offset;
+ ulong dst_addr;
if (phdr->p_type != PT_LOAD)
continue;
@@ -195,10 +197,11 @@
if (phdr->p_filesz != phdr->p_memsz)
memset(dst + phdr->p_filesz, 0x00,
phdr->p_memsz - phdr->p_filesz);
- flush_cache(rounddown((unsigned long)dst, ARCH_DMA_MINALIGN),
- roundup((unsigned long)dst + phdr->p_filesz,
+ dst_addr = map_to_sysmem(dst);
+ flush_cache(rounddown(dst_addr, ARCH_DMA_MINALIGN),
+ roundup(dst_addr + phdr->p_filesz,
ARCH_DMA_MINALIGN) -
- rounddown((unsigned long)dst, ARCH_DMA_MINALIGN));
+ rounddown(dst_addr, ARCH_DMA_MINALIGN));
}
return 0;
@@ -377,6 +380,7 @@
const struct dm_rproc_ops *ops;
Elf32_Shdr *shdr;
void *src, *dst;
+ ulong dst_addr;
shdr = rproc_elf32_find_rsc_table(dev, fw_addr, fw_size);
if (!shdr)
@@ -398,10 +402,10 @@
(ulong)dst, *rsc_size);
memcpy(dst, src, *rsc_size);
- flush_cache(rounddown((unsigned long)dst, ARCH_DMA_MINALIGN),
- roundup((unsigned long)dst + *rsc_size,
- ARCH_DMA_MINALIGN) -
- rounddown((unsigned long)dst, ARCH_DMA_MINALIGN));
+ dst_addr = map_to_sysmem(dst);
+ flush_cache(rounddown(dst_addr, ARCH_DMA_MINALIGN),
+ roundup(dst_addr + *rsc_size, ARCH_DMA_MINALIGN) -
+ rounddown(dst_addr, ARCH_DMA_MINALIGN));
return 0;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 7fc53a6..9c2d139 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -203,6 +203,7 @@
config RTC_PL031
bool "Enable ARM AMBA PL031 RTC driver"
+ depends on DM_RTC
help
The ARM PrimeCell Real Time Clock (PL031) is an optional SoC
peripheral based on the Advanced Microcontroller Bus Architecture
diff --git a/drivers/spi/cadence_ospi_versal.c b/drivers/spi/cadence_ospi_versal.c
index 222f828..dcf28c7 100644
--- a/drivers/spi/cadence_ospi_versal.c
+++ b/drivers/spi/cadence_ospi_versal.c
@@ -125,49 +125,8 @@
return 0;
}
-#if defined(CONFIG_DM_GPIO)
-int cadence_qspi_versal_flash_reset(struct udevice *dev)
-{
- struct gpio_desc gpio;
- u32 reset_gpio;
- int ret;
-
- /* request gpio and set direction as output set to 1 */
- ret = gpio_request_by_name(dev, "reset-gpios", 0, &gpio,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- if (ret) {
- printf("%s: unable to reset ospi flash device", __func__);
- return ret;
- }
-
- reset_gpio = PMIO_NODE_ID_BASE + gpio.offset;
-
- /* Request for pin */
- xilinx_pm_request(PM_PINCTRL_REQUEST, reset_gpio, 0, 0, 0, NULL);
-
- /* Enable hysteresis in cmos receiver */
- xilinx_pm_request(PM_PINCTRL_CONFIG_PARAM_SET, reset_gpio,
- PM_PINCTRL_CONFIG_SCHMITT_CMOS,
- PM_PINCTRL_INPUT_TYPE_SCHMITT, 0, NULL);
-
- /* Disable Tri-state */
- xilinx_pm_request(PM_PINCTRL_CONFIG_PARAM_SET, reset_gpio,
- PM_PINCTRL_CONFIG_TRI_STATE,
- PM_PINCTRL_TRI_STATE_DISABLE, 0, NULL);
- udelay(1);
-
- /* Set value 0 to pin */
- dm_gpio_set_value(&gpio, 0);
- udelay(1);
-
- /* Set value 1 to pin */
- dm_gpio_set_value(&gpio, 1);
- udelay(1);
-
- return 0;
-}
-#else
-int cadence_qspi_versal_flash_reset(struct udevice *dev)
+#if !CONFIG_IS_ENABLED(DM_GPIO)
+int cadence_qspi_flash_reset(struct udevice *dev)
{
/* CRP WPROT */
writel(0, WPROT_CRP);
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 9c466f8..623904e 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -33,7 +33,7 @@
return 0;
}
-__weak int cadence_qspi_versal_flash_reset(struct udevice *dev)
+__weak int cadence_qspi_flash_reset(struct udevice *dev)
{
return 0;
}
@@ -251,15 +251,10 @@
priv->wr_delay = 50 * DIV_ROUND_UP(NSEC_PER_SEC, priv->ref_clk_hz);
- /* Versal and Versal-NET use spi calibration to set read delay */
- if (CONFIG_IS_ENABLED(ARCH_VERSAL) ||
- CONFIG_IS_ENABLED(ARCH_VERSAL_NET) ||
- CONFIG_IS_ENABLED(ARCH_VERSAL2))
- if (priv->read_delay >= 0)
- priv->read_delay = -1;
-
/* Reset ospi flash device */
- return cadence_qspi_versal_flash_reset(bus);
+ return cadence_qspi_flash_reset(bus);
+
+ return 0;
}
static int cadence_spi_remove(struct udevice *dev)
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 36b7d38..d604975 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -446,7 +446,7 @@
slave = dev_get_parent_priv(dev);
bus_data = dev_get_uclass_priv(bus);
-#if CONFIG_IS_ENABLED(SPI_ADVANCE)
+#if CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)
if ((dev_read_bool(dev, "parallel-memories")) && !slave->multi_cs_cap) {
dev_err(dev, "controller doesn't support multi CS\n");
return -EINVAL;
@@ -515,7 +515,7 @@
int mode = 0;
int value;
-#if CONFIG_IS_ENABLED(SPI_ADVANCE)
+#if CONFIG_IS_ENABLED(SPI_STACKED_PARALLEL)
int ret;
ret = dev_read_u32_array(dev, "reg", plat->cs, SPI_CS_CNT_MAX);
diff --git a/drivers/sysinfo/gazerbeam.h b/drivers/sysinfo/gazerbeam.h
index 6bf3c00..047f365 100644
--- a/drivers/sysinfo/gazerbeam.h
+++ b/drivers/sysinfo/gazerbeam.h
@@ -8,8 +8,8 @@
#include <sysinfo.h>
enum {
- BOARD_HWVERSION = SYSINFO_ID_BOARD_MODEL,
- BOARD_MULTICHANNEL = SYSINFO_ID_USER,
+ BOARD_HWVERSION = SYSID_BOARD_MODEL,
+ BOARD_MULTICHANNEL = SYSID_USER,
BOARD_VARIANT
};
diff --git a/drivers/sysinfo/gpio.c b/drivers/sysinfo/gpio.c
index aaca318..66d2a91 100644
--- a/drivers/sysinfo/gpio.c
+++ b/drivers/sysinfo/gpio.c
@@ -38,7 +38,7 @@
struct sysinfo_gpio_priv *priv = dev_get_priv(dev);
switch (id) {
- case SYSINFO_ID_BOARD_MODEL:
+ case SYSID_BOARD_MODEL:
*val = priv->revision;
return 0;
default:
@@ -51,7 +51,7 @@
struct sysinfo_gpio_priv *priv = dev_get_priv(dev);
switch (id) {
- case SYSINFO_ID_BOARD_MODEL: {
+ case SYSID_BOARD_MODEL: {
const char *name = NULL;
int i, ret;
u32 revision;
diff --git a/drivers/sysinfo/rcar3.c b/drivers/sysinfo/rcar3.c
index 37e2ccc..2994df9 100644
--- a/drivers/sysinfo/rcar3.c
+++ b/drivers/sysinfo/rcar3.c
@@ -46,7 +46,7 @@
struct sysinfo_rcar_priv *priv = dev_get_priv(dev);
switch (id) {
- case SYSINFO_ID_BOARD_MODEL:
+ case SYSID_BOARD_MODEL:
strncpy(val, priv->boardmodel, size);
val[size - 1] = '\0';
return 0;
diff --git a/drivers/sysinfo/sandbox.h b/drivers/sysinfo/sandbox.h
index d9c5804..a7cbac0 100644
--- a/drivers/sysinfo/sandbox.h
+++ b/drivers/sysinfo/sandbox.h
@@ -5,7 +5,7 @@
*/
enum {
- BOOL_CALLED_DETECT = SYSINFO_ID_USER,
+ BOOL_CALLED_DETECT = SYSID_USER,
INT_TEST1,
INT_TEST2,
STR_VACATIONSPOT,
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 2ab41cb..55e62b3 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -51,7 +51,8 @@
};
static int dwc3_generic_probe(struct udevice *dev,
- struct dwc3_generic_priv *priv)
+ struct dwc3_generic_priv *priv,
+ enum usb_dr_mode mode)
{
int rc;
struct dwc3_generic_plat *plat = dev_get_plat(dev);
@@ -62,7 +63,7 @@
dwc3->dev = dev;
dwc3->maximum_speed = plat->maximum_speed;
- dwc3->dr_mode = plat->dr_mode;
+ dwc3->dr_mode = mode;
#if CONFIG_IS_ENABLED(OF_CONTROL)
dwc3_of_parse(dwc3);
@@ -197,7 +198,7 @@
{
struct dwc3_generic_priv *priv = dev_get_priv(dev);
- return dwc3_generic_probe(dev, priv);
+ return dwc3_generic_probe(dev, priv, USB_DR_MODE_PERIPHERAL);
}
static int dwc3_generic_peripheral_remove(struct udevice *dev)
@@ -241,7 +242,7 @@
struct dwc3_generic_host_priv *priv = dev_get_priv(dev);
int rc;
- rc = dwc3_generic_probe(dev, &priv->gen_priv);
+ rc = dwc3_generic_probe(dev, &priv->gen_priv, USB_DR_MODE_HOST);
if (rc)
return rc;
diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c
index 4bd3b9d..69d3073 100644
--- a/drivers/usb/eth/asix88179.c
+++ b/drivers/usb/eth/asix88179.c
@@ -173,9 +173,10 @@
#define USB_BULK_SEND_TIMEOUT 5000
#define USB_BULK_RECV_TIMEOUT 5000
-#define AX_RX_URB_SIZE 1024 * 0x12
+#define AX_RX_URB_SIZE 1024 * 0x1a
#define BLK_FRAME_SIZE 0x200
#define PHY_CONNECT_TIMEOUT 5000
+#define PHY_RESET_TIMEOUT 500
#define TIMEOUT_RESOLUTION 50 /* ms */
@@ -192,10 +193,10 @@
static const struct {
unsigned char ctrl, timer_l, timer_h, size, ifg;
} AX88179_BULKIN_SIZE[] = {
- {7, 0x4f, 0, 0x02, 0xff},
- {7, 0x20, 3, 0x03, 0xff},
- {7, 0xae, 7, 0x04, 0xff},
- {7, 0xcc, 0x4c, 0x04, 8},
+ {7, 0x4f, 0, 0x12, 0xff},
+ {7, 0x20, 3, 0x16, 0xff},
+ {7, 0xae, 7, 0x18, 0xff},
+ {7, 0xcc, 0x4c, 0x18, 8},
};
/* driver private */
@@ -285,6 +286,26 @@
return ret;
}
+static int asix_reset_phy(struct ueth_data *dev)
+{
+ u16 bmcr;
+ u32 t;
+
+ /* Reset the PHY */
+ bmcr = BMCR_RESET;
+ asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMCR, 2, &bmcr);
+
+ for (t = 0; t < PHY_RESET_TIMEOUT; t += TIMEOUT_RESOLUTION) {
+ asix_read_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMCR, 2, &bmcr);
+ if (!(bmcr & BMCR_RESET))
+ return 0;
+ mdelay(TIMEOUT_RESOLUTION);
+ }
+
+ debug("Reset PHY timeout\n");
+ return -ETIMEDOUT;
+}
+
static int asix_basic_reset(struct ueth_data *dev,
struct asix_private *dev_priv)
{
@@ -311,7 +332,7 @@
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
- dev_priv->rx_urb_size = 128 * 20;
+ dev_priv->rx_urb_size = 1024 * 20;
/* Water Level configuration */
*tmp = 0x34;
@@ -344,14 +365,22 @@
AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN;
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16);
+ asix_reset_phy(dev);
+
u16 adv = 0;
- adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK |
- ADVERTISE_NPAGE | ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP;
+ adv = ADVERTISE_ALL | ADVERTISE_CSMA |
+ ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP;
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv);
adv = ADVERTISE_1000FULL;
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv);
+ /* Restart auto-negotiation */
+ u16 bmcr = 0;
+ asix_read_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMCR, 2, &bmcr);
+ bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
+ asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMCR, 2, &bmcr);
+
return 0;
}
diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index bbe03cf..4bff75d 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -649,12 +649,30 @@
}
}
+/*
+ * This function explicitly sets the address, without the "USBADRA" (advance)
+ * feature, which is not supported by older versions of the controller.
+ */
+static void ci_set_address(struct ci_udc *udc, u8 address)
+{
+ DBG("%s %x\n", __func__, address);
+ writel(address << 25, &udc->devaddr);
+}
+
static void handle_ep_complete(struct ci_ep *ci_ep)
{
struct ept_queue_item *item, *next_td;
int num, in, len, j;
struct ci_req *ci_req;
+ /* Set the device address that was previously sent by SET_ADDRESS */
+ if (controller.next_device_address != 0) {
+ struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor;
+
+ ci_set_address(udc, controller.next_device_address);
+ controller.next_device_address = 0;
+ }
+
num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
in = (ci_ep->desc->bEndpointAddress & USB_DIR_IN) != 0;
item = ci_get_qtd(num, in);
@@ -783,7 +801,7 @@
* write address delayed (will take effect
* after the next IN txn)
*/
- writel((r.wValue << 25) | (1 << 24), &udc->devaddr);
+ controller.next_device_address = r.wValue;
req->length = 0;
usb_ep_queue(controller.gadget.ep0, req, 0);
return;
@@ -814,6 +832,9 @@
int i, num, in;
struct ept_queue_head *head;
struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor;
+
+ ci_set_address(udc, 0);
+
writel(readl(&udc->epcomp), &udc->epcomp);
#ifdef CONFIG_CI_UDC_HAS_HOSTPC
writel(readl(&udc->epsetupstat), &udc->epsetupstat);
@@ -934,6 +955,7 @@
struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor;
if (is_on) {
/* RESET */
+ controller.next_device_address = 0;
writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd);
udelay(200);
diff --git a/drivers/usb/gadget/ci_udc.h b/drivers/usb/gadget/ci_udc.h
index bea2f9f..807f208 100644
--- a/drivers/usb/gadget/ci_udc.h
+++ b/drivers/usb/gadget/ci_udc.h
@@ -105,6 +105,7 @@
struct ept_queue_head *epts;
uint8_t *items_mem;
struct ci_ep ep[NUM_ENDPOINTS];
+ u8 next_device_address;
};
struct ept_queue_head {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0e45f0a..b39b254 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -351,6 +351,13 @@
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.
+config WDT_SIEMENS_PMIC
+ bool "Enable PMIC Watchdog Timer support for Siemens platforms"
+ depends on ARCH_IMX8 && WDT
+ help
+ Select this to enable the PMIC watchdog driver controlled via
+ IMX8 SCU API found on Siemens platforms.
+
config WDT_SL28CPLD
bool "sl28cpld watchdog timer support"
depends on WDT && SL28CPLD
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0b107c0..9b6b1a8 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
+obj-$(CONFIG_WDT_SIEMENS_PMIC) += siemens_pmic_wdt.o
obj-$(CONFIG_WDT_SL28CPLD) += sl28cpld-wdt.o
obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
obj-$(CONFIG_WDT_STARFIVE) += starfive_wdt.o
diff --git a/drivers/watchdog/siemens_pmic_wdt.c b/drivers/watchdog/siemens_pmic_wdt.c
new file mode 100644
index 0000000..87e817b
--- /dev/null
+++ b/drivers/watchdog/siemens_pmic_wdt.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for a PMIC watchdog timer controlled via Siemens SCU firmware
+ * extensions. Only useful on some Siemens i.MX8-based platforms as
+ * special NXP SCFW is needed which provides the needed SCU API.
+ *
+ * Copyright (C) 2024 Siemens AG
+ */
+
+#include <dm.h>
+#include <wdt.h>
+#include <firmware/imx/sci/sci.h>
+
+/* watchdog commands */
+#define CMD_START_WDT 0x55
+#define CMD_STOP_WDT 0x45
+#define CMD_PING_WDT 0x35
+
+static int scu_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ /* start external watchdog via Timer API */
+ return sc_timer_control_siemens_pmic_wdog(-1, CMD_START_WDT);
+}
+
+static int scu_wdt_stop(struct udevice *dev)
+{
+ /* stop external watchdog via Timer API */
+ return sc_timer_control_siemens_pmic_wdog(-1, CMD_STOP_WDT);
+}
+
+static int scu_wdt_reset(struct udevice *dev)
+{
+ return sc_timer_control_siemens_pmic_wdog(-1, CMD_PING_WDT);
+}
+
+static int scu_wdt_probe(struct udevice *dev)
+{
+ debug("%s(dev=%p)\n", __func__, dev);
+ return 0;
+}
+
+static const struct wdt_ops scu_wdt_ops = {
+ .reset = scu_wdt_reset,
+ .start = scu_wdt_start,
+ .stop = scu_wdt_stop,
+};
+
+static const struct udevice_id scu_wdt_ids[] = {
+ { .compatible = "siemens,scu-wdt" },
+ { }
+};
+
+U_BOOT_DRIVER(scu_wdt) = {
+ .name = "scu_wdt",
+ .id = UCLASS_WDT,
+ .of_match = scu_wdt_ids,
+ .probe = scu_wdt_probe,
+ .ops = &scu_wdt_ops,
+};
diff --git a/dts/upstream/include/dt-bindings/clock/imx93-clock.h b/dts/upstream/include/dt-bindings/clock/imx93-clock.h
index 787c9e7..6c68506 100644
--- a/dts/upstream/include/dt-bindings/clock/imx93-clock.h
+++ b/dts/upstream/include/dt-bindings/clock/imx93-clock.h
@@ -204,6 +204,10 @@
#define IMX93_CLK_A55_SEL 199
#define IMX93_CLK_A55_CORE 200
#define IMX93_CLK_PDM_IPG 201
-#define IMX93_CLK_END 202
+#define IMX91_CLK_ENET1_QOS_TSN 202
+#define IMX91_CLK_ENET_TIMER 203
+#define IMX91_CLK_ENET2_REGULAR 204
+#define IMX91_CLK_ENET2_REGULAR_GATE 205
+#define IMX91_CLK_ENET1_QOS_TSN_GATE 206
#endif
diff --git a/dts/upstream/src/arm64/freescale/imx91-11x11-evk.dts b/dts/upstream/src/arm64/freescale/imx91-11x11-evk.dts
new file mode 100644
index 0000000..65571fc
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+ compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+ model = "NXP i.MX91 11X11 EVK board";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ rtc0 = &bbnsm_rtc;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vref_1v8";
+ };
+
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "audio-pwr";
+ gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "WLAN_EN";
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ };
+
+ reg_vdd_12v: regulator-vdd-12v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "reg_vdd_12v";
+ gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vrpi_3v3: regulator-vrpi-3v3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VRPI_3V3";
+ vin-supply = <&buck4>;
+ gpio = <&pcal6524 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vrpi_5v: regulator-vrpi-5v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VRPI_5V";
+ gpio = <&pcal6524 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ reusable;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&eqos {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+&fec {
+ phy-handle = <ðphy2>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ pinctrl-names = "default", "sleep";
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+/*
+ * When add, delete or change any target device setting in &lpi2c1,
+ * please synchronize the changes to the &i3c1 bus in imx91-11x11-evk-i3c.dts.
+ */
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX93_CLK_SAI3_GATE>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ DCVDD-supply = <®_audio_pwr>;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+
+ lsm6dsm@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
+};
+
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio3>;
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ pinctrl-names = "default";
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+
+ regulators {
+
+ buck1: BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2237500>;
+ regulator-min-microvolt = <650000>;
+ regulator-name = "BUCK1";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2187500>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK2";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK4";
+ };
+
+ buck5: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK5";
+ };
+
+ buck6: BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK6";
+ };
+
+ ldo1: LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1600000>;
+ regulator-name = "LDO1";
+ };
+
+ ldo4: LDO4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "LDO4";
+ };
+
+ ldo5: LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+
+ adp5585: io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #pwm-cells = <3>;
+ gpio-reserved-ranges = <5 1>;
+
+ exp-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+ status = "okay";
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ ptn5110_2: tcpc@51 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x51>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+ status = "okay";
+
+ typec2_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec2_dr_sw: endpoint {
+ remote-endpoint = <&usb2_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+ status = "okay";
+ };
+};
+
+&lpuart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lpuart5 {
+ pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg1 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb2_drd_sw: endpoint {
+ remote-endpoint = <&typec2_dr_sw>;
+ };
+ };
+};
+
+&usdhc1 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ status = "okay";
+};
+
+&usdhc2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ no-mmc;
+ no-sdio;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__ENET1_MDC 0x57e
+ MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
+ MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x5fe
+ MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
+ MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x57e
+ MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
+ MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
+ MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
+ MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqossleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__GPIO4_IO0 0x31e
+ MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x31e
+ MX91_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX91_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX91_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX91_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX91_PAD_ENET1_RXC__GPIO4_IO9 0x31e
+ MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x31e
+ MX91_PAD_ENET1_TD0__GPIO4_IO5 0x31e
+ MX91_PAD_ENET1_TD1__GPIO4_IO4 0x31e
+ MX91_PAD_ENET1_TD2__GPIO4_IO3 0x31e
+ MX91_PAD_ENET1_TD3__GPIO4_IO3 0x31e
+ MX91_PAD_ENET1_TXC__GPIO4_IO7 0x31e
+ MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__ENET2_MDC 0x57e
+ MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x57e
+ MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x57e
+ MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x57e
+ MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x57e
+ MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x57e
+ MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x5fe
+ MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x57e
+ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x57e
+ MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x57e
+ MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x57e
+ MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x5fe
+ MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ MX91_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX91_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX91_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX91_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX91_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX91_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX91_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX91_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX91_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX91_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2_sleep: flexcan2sleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO25__GPIO2_IO25 0x31e
+ MX91_PAD_GPIO_IO27__GPIO2_IO27 0x31e
+ >;
+ };
+
+ pinctrl_lcdif_gpio: lcdifgpiogrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO00__GPIO2_IO0 0x51e
+ MX91_PAD_GPIO_IO01__GPIO2_IO1 0x51e
+ MX91_PAD_GPIO_IO02__GPIO2_IO2 0x51e
+ MX91_PAD_GPIO_IO03__GPIO2_IO3 0x51e
+ >;
+ };
+
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e
+ MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e
+ MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e
+ MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e
+ MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x31e
+ MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x31e
+ MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x31e
+ MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x31e
+ MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x31e
+ MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x31e
+ MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x31e
+ MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x31e
+ MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x31e
+ MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x31e
+ MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e
+ MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e
+ MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e
+ MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e
+ MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e
+ MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e
+ MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e
+ MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e
+ MX91_PAD_GPIO_IO27__GPIO2_IO27 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX91_PAD_PDM_CLK__PDM_CLK 0x31e
+ MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e
+ MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e
+ >;
+ };
+
+ pinctrl_pdm_sleep: pdmsleepgrp {
+ fsl,pins = <
+ MX91_PAD_PDM_CLK__GPIO1_IO8 0x31e
+ MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 0x31e
+ MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
+ MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
+ MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e
+ MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e
+ >;
+ };
+
+ pinctrl_sai1_sleep: sai1sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SAI1_TXC__GPIO1_IO12 0x51e
+ MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x51e
+ MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x51e
+ MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x51e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ MX91_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ MX91_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 0x31e
+ MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 0x31e
+ >;
+ };
+
+ pinctrl_sai3_sleep: sai3sleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO26__GPIO2_IO26 0x51e
+ MX91_PAD_GPIO_IO16__GPIO2_IO16 0x51e
+ MX91_PAD_GPIO_IO17__GPIO2_IO17 0x51e
+ MX91_PAD_GPIO_IO19__GPIO2_IO19 0x51e
+ MX91_PAD_GPIO_IO20__GPIO2_IO20 0x51e
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO22__SPDIF_IN 0x31e
+ MX91_PAD_GPIO_IO23__SPDIF_OUT 0x31e
+ >;
+ };
+
+ pinctrl_spdif_sleep: spdifsleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO22__GPIO2_IO22 0x31e
+ MX91_PAD_GPIO_IO23__GPIO2_IO23 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX91_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX91_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX91_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x1382
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x1382
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1382
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x1382
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1382
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1382
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1382
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1382
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1382
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__GPIO3_IO1 0x51e
+ MX91_PAD_SD2_CMD__GPIO3_IO2 0x51e
+ MX91_PAD_SD2_DATA0__GPIO3_IO3 0x51e
+ MX91_PAD_SD2_DATA1__GPIO3_IO4 0x51e
+ MX91_PAD_SD2_DATA2__GPIO3_IO5 0x51e
+ MX91_PAD_SD2_DATA3__GPIO3_IO6 0x51e
+ MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x138e
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x13fe
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x1382
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x1382
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x1382
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x1382
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x1382
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__GPIO3_IO20 0x31e
+ MX91_PAD_SD3_CMD__GPIO3_IO21 0x31e
+ MX91_PAD_SD3_DATA0__GPIO3_IO22 0x31e
+ MX91_PAD_SD3_DATA1__GPIO3_IO23 0x31e
+ MX91_PAD_SD3_DATA2__GPIO3_IO24 0x31e
+ MX91_PAD_SD3_DATA3__GPIO3_IO25 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
+ >;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx91-pinfunc.h b/dts/upstream/src/arm64/freescale/imx91-pinfunc.h
new file mode 100644
index 0000000..b0066df
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX 0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0 0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0 0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1 0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0 0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1 0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2 0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2 0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3 0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL 0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK 0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B 0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL 0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3 0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4 0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4 0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5 0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0 0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5 0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6 0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1 0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6 0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7 0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1 0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1 0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK 0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B 0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL 0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7 0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8 0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2 0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8 0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9 0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3 0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9 0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4 0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11 0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK 0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5 0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK 0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B 0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL 0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2 0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3 0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6 0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15 0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX 0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7 0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK 0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B 0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX 0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2 0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8 0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9 0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19 0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3 0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN 0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN 0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2 0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0 0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0 0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23 0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD 0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT 0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1 0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL 0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1 0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27 0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3 0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX 0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3 0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1 0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX 0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX 0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC 0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0 0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0 0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL 0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA 0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1 0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA 0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX 0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2 0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO3 0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL 0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK 0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX 0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3 0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3 0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA 0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B 0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR 0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4 0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4 0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B 0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX 0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5 0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5 0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6 0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK 0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7 0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7 0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN 0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8 0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0 0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9 0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9 0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT 0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX 0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10 0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B 0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1 0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11 0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2 0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12 0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3 0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13 0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC 0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B 0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14 0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK 0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0 0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0 0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16 0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC 0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17 0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC 0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B 0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18 0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1 0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX 0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19 0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2 0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3 0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER 0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21 0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4 0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0 0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5 0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER 0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23 0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6 0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX 0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24 0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7 0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN 0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25 0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8 0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9 0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8 0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8 0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK 0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD 0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9 0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9 0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN 0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0 0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT 0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1 0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13 0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1 0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4 0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0 0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5 0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN 0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6 0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK 0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7 0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP 0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17 0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT 0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B 0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD 0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B 0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21 0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B 0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B 0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA 0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL 0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25 0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0 0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0 0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL 0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA 0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1 0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1 0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA 0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2 0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2 0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT 0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX 0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3 0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3 0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX 0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4 0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4 0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX 0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5 0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5 0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX 0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6 0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6 0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX 0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7 0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0 0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1 0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO3 0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B 0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3 0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3 0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX 0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4 0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX 0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5 0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6 0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX 0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B 0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK 0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3 0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7 0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC 0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8 0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1 0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT 0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B 0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN 0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B 0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX 0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12 0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK 0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX 0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK 0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK 0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT 0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15 0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/dts/upstream/src/arm64/freescale/imx91.dtsi b/dts/upstream/src/arm64/freescale/imx91.dtsi
new file mode 100644
index 0000000..be923e5
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx91.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx93.dtsi"
+
+/delete-node/ &A55_1;
+/delete-node/ &cm33;
+/delete-node/ &mlmix;
+/delete-node/ &mu1;
+/delete-node/ &mu2;
+
+&clk {
+ compatible = "fsl,imx91-ccm";
+};
+
+&eqos {
+ clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+};
+
+&fec {
+ clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>,
+ <&clk IMX93_CLK_DUMMY>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_I3C1_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_I3C2_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+ compatible = "fsl,imx91-iomuxc";
+};
+
+&tmu {
+ status = "disabled";
+};
+
+&{/soc@0/ddr-pmu@4e300dc0} {
+ compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&{/thermal-zones/cpu-thermal/cooling-maps/map0} {
+ cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
diff --git a/env/Kconfig b/env/Kconfig
index 031cf58..aaf0b1f 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -21,6 +21,19 @@
environment is assumed to come from the ad-hoc
CFG_EXTRA_ENV_SETTINGS #define
+config ENV_CALLBACK_LIST_STATIC
+ string "Static callbacks list"
+ default ""
+ help
+ The environment callbacks are associated with variables in a
+ static list. Define this list in the following format:
+
+ entry = variable_name[:callback_name]
+ list = entry[,list]
+
+ If the callback name is not specified, then the callback is deleted.
+ Spaces are also allowed anywhere in the list.
+
config SAVEENV
def_bool y if CMD_SAVEENV
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 26277b9..789adf2 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -400,6 +400,12 @@
*/
struct bloblist_hdr *bloblist;
#endif
+#if CONFIG_IS_ENABLED(HANDOFF)
+ /**
+ * @spl_handoff: SPL hand-off information
+ */
+ struct spl_handoff *spl_handoff;
+#endif
#if defined(CONFIG_TRANSLATION_OFFSET)
/**
* @translation_offset: optional translation offset
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 70303ac..8c619c1 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -30,8 +30,6 @@
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
#ifdef CONFIG_ARM
unsigned long bi_arm_freq; /* arm frequency */
unsigned long bi_dsp_freq; /* dsp core frequency */
diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 1f61b2b..4d95f3f 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -95,7 +95,9 @@
#define CFG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_2 0x880000000
-/* DDR3 board total DDR is 1 GB */
+/* Set default values to the smallest DDR we have in capricorn modules
+ * Use it in case the system controller would return an error
+ */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
diff --git a/include/configs/deneb.h b/include/configs/deneb.h
deleted file mode 100644
index f155bb8..0000000
--- a/include/configs/deneb.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2019 Siemens AG
- *
- */
-
-#ifndef __DENEB_H
-#define __DENEB_H
-
-#include "capricorn-common.h"
-
-/* DDR3 board total DDR is 2 GB */
-#undef PHYS_SDRAM_1_SIZE
-#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
-
-#endif /* __DENEB_H */
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index d323f84..57ecb5e 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -34,7 +34,7 @@
#define CFG_SYS_FSL_ESDHC_ADDR 0
#define CFG_EXTRA_ENV_SETTINGS \
- "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
+ "altbootcmd=run bootcmd\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \
diff --git a/include/configs/imx8mp_data_modul_edm_sbc.h b/include/configs/imx8mp_data_modul_edm_sbc.h
index f953847..de5bdd3 100644
--- a/include/configs/imx8mp_data_modul_edm_sbc.h
+++ b/include/configs/imx8mp_data_modul_edm_sbc.h
@@ -24,7 +24,7 @@
#define FEC_QUIRK_ENET_MAC
#define CFG_EXTRA_ENV_SETTINGS \
- "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
+ "altbootcmd=run bootcmd\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
"devpart=1\0" \
diff --git a/include/configs/imx91_evk.h b/include/configs/imx91_evk.h
new file mode 100644
index 0000000..9c5014f
--- /dev/null
+++ b/include/configs/imx91_evk.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __IMX91_EVK_H
+#define __IMX91_EVK_H
+
+#define CFG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define CFG_SYS_INIT_RAM_ADDR 0x80000000
+#define CFG_SYS_INIT_RAM_SIZE 0x200000
+
+#define CFG_SYS_SDRAM_BASE 0x80000000
+#define PHYS_SDRAM 0x80000000
+#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
+
+#define WDOG_BASE_ADDR WDG3_BASE_ADDR
+
+#endif
diff --git a/include/configs/khadas-vim3_android.h b/include/configs/khadas-vim3_android.h
index fc89efb..551ab51 100644
--- a/include/configs/khadas-vim3_android.h
+++ b/include/configs/khadas-vim3_android.h
@@ -24,7 +24,7 @@
"name=boot_a,size=64M,bootable,uuid=${uuid_gpt_boot_a};" \
"name=boot_b,size=64M,bootable,uuid=${uuid_gpt_boot_b};" \
"name=super,size=3072M,uuid=${uuid_gpt_super};" \
- "name=userdata,size=11282M,uuid=${uuid_gpt_userdata};" \
+ "name=userdata,size=11218M,uuid=${uuid_gpt_userdata};" \
"name=rootfs,size=-,uuid=" ROOT_UUID
#else
#define PARTS_DEFAULT \
@@ -37,14 +37,31 @@
"name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
"name=super,size=1792M,uuid=${uuid_gpt_super};" \
- "name=userdata,size=12786M,uuid=${uuid_gpt_userdata};" \
+ "name=userdata,size=12722M,uuid=${uuid_gpt_userdata};" \
"name=rootfs,size=-,uuid=" ROOT_UUID
#endif
-#define EXTRA_ANDROID_ENV_SETTINGS \
- "board=vim3\0" \
- "board_name=vim3\0" \
+#define CFG_EXTRA_ENV_SETTINGS \
+ "board=vim3\0" \
+ "board_name=vim3\0" \
+ "bootmeths=android\0" \
+ "bootcmd=bootflow scan\0" \
+ "adtb_idx=3\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
+ "mmcdev=2\0" \
+ "fastboot_raw_partition_bootloader=0x1 0xfff mmcpart 1\0" \
+ "fastboot_raw_partition_bootenv=0x0 0xfff mmcpart 2\0" \
+ "stdin=" STDIN_CFG "\0" \
+ "stdout=" STDOUT_CFG "\0" \
+ "stderr=" STDOUT_CFG "\0" \
+ "dtboaddr=0x08200000\0" \
+ "loadaddr=0x01080000\0" \
+ "fdt_addr_r=0x01000000\0" \
+ "scriptaddr=0x08000000\0" \
+ "kernel_addr_r=0x01080000\0" \
+ "pxefile_addr_r=0x01080000\0" \
+ "ramdisk_addr_r=0x13000000\0" \
-#include <configs/meson64_android.h>
+#include <configs/meson64.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/khadas-vim3l_android.h b/include/configs/khadas-vim3l_android.h
index 5b2aed1..1869249 100644
--- a/include/configs/khadas-vim3l_android.h
+++ b/include/configs/khadas-vim3l_android.h
@@ -24,7 +24,7 @@
"name=boot_a,size=64M,bootable,uuid=${uuid_gpt_boot_a};" \
"name=boot_b,size=64M,bootable,uuid=${uuid_gpt_boot_b};" \
"name=super,size=3072M,uuid=${uuid_gpt_super};" \
- "name=userdata,size=11282M,uuid=${uuid_gpt_userdata};" \
+ "name=userdata,size=11218M,uuid=${uuid_gpt_userdata};" \
"name=rootfs,size=-,uuid=" ROOT_UUID
#else
#define PARTS_DEFAULT \
@@ -37,14 +37,31 @@
"name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
"name=super,size=1792M,uuid=${uuid_gpt_super};" \
- "name=userdata,size=12786M,uuid=${uuid_gpt_userdata};" \
+ "name=userdata,size=12722M,uuid=${uuid_gpt_userdata};" \
"name=rootfs,size=-,uuid=" ROOT_UUID
#endif
-#define EXTRA_ANDROID_ENV_SETTINGS \
- "board=vim3l\0" \
- "board_name=vim3l\0" \
+#define CFG_EXTRA_ENV_SETTINGS \
+ "board=vim3l\0" \
+ "board_name=vim3l\0" \
+ "bootmeths=android\0" \
+ "bootcmd=bootflow scan\0" \
+ "adtb_idx=2\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
+ "mmcdev=2\0" \
+ "fastboot_raw_partition_bootloader=0x1 0xfff mmcpart 1\0" \
+ "fastboot_raw_partition_bootenv=0x0 0xfff mmcpart 2\0" \
+ "stdin=" STDIN_CFG "\0" \
+ "stdout=" STDOUT_CFG "\0" \
+ "stderr=" STDOUT_CFG "\0" \
+ "dtboaddr=0x08200000\0" \
+ "loadaddr=0x01080000\0" \
+ "fdt_addr_r=0x01000000\0" \
+ "scriptaddr=0x08000000\0" \
+ "kernel_addr_r=0x01080000\0" \
+ "pxefile_addr_r=0x01080000\0" \
+ "ramdisk_addr_r=0x13000000\0" \
-#include <configs/meson64_android.h>
+#include <configs/meson64.h>
#endif /* __CONFIG_H */
diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h
index 77364bb..d6ef0a8 100644
--- a/include/configs/meson64_android.h
+++ b/include/configs/meson64_android.h
@@ -104,12 +104,6 @@
"elif test $board_name = sei610; then " \
"echo \" Reading DTB for sei610...\"; " \
"setenv dtb_index 1;" \
- "elif test $board_name = vim3l; then " \
- "echo \" Reading DTB for vim3l...\"; " \
- "setenv dtb_index 2;" \
- "elif test $board_name = vim3; then " \
- "echo \" Reading DTB for vim3...\"; " \
- "setenv dtb_index 3;" \
"else " \
"echo Error: Android boot is not supported for $board_name; " \
"exit; " \
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 6740ab2..3bcc4c4 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -82,7 +82,7 @@
"nor0=flash-0\0"\
"mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
- "1m(romfs),1m(cramfs),-(jffs2)\0"\
+ "1m(romfs),1m(cramfs),-(fs)\0"\
"nc=setenv stdout nc;"\
"setenv stdin nc\0" \
"serial=setenv stdout serial;"\
diff --git a/include/configs/phycore_am62x.h b/include/configs/phycore_am62x.h
index 10b78b6..2bc6e7e 100644
--- a/include/configs/phycore_am62x.h
+++ b/include/configs/phycore_am62x.h
@@ -12,4 +12,8 @@
/* DDR Configuration */
#define CFG_SYS_SDRAM_BASE 0x80000000
+#define PHYCORE_AM6XX_FW_NAME_TIBOOT3 u"PHYCORE_AM62X_TIBOOT3"
+#define PHYCORE_AM6XX_FW_NAME_SPL u"PHYCORE_AM62X_SPL"
+#define PHYCORE_AM6XX_FW_NAME_UBOOT u"PHYCORE_AM62X_UBOOT"
+
#endif /* __PHYCORE_AM62X_H */
diff --git a/include/configs/phycore_am64x.h b/include/configs/phycore_am64x.h
index 9377db3..dd3dfa9 100644
--- a/include/configs/phycore_am64x.h
+++ b/include/configs/phycore_am64x.h
@@ -12,4 +12,8 @@
/* DDR Configuration */
#define CFG_SYS_SDRAM_BASE 0x80000000
+#define PHYCORE_AM6XX_FW_NAME_TIBOOT3 u"PHYCORE_AM64X_TIBOOT3"
+#define PHYCORE_AM6XX_FW_NAME_SPL u"PHYCORE_AM64X_SPL"
+#define PHYCORE_AM6XX_FW_NAME_UBOOT u"PHYCORE_AM64X_UBOOT"
+
#endif /* __PHYCORE_AM64X_H */
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index e74a3f1..20e2ab8 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -20,52 +20,6 @@
/* For RAW image gives a error info not panic */
#endif
-#define CFG_EXTRA_ENV_SETTINGS \
- "image=Image\0" \
- "console=ttymxc2,115200\0" \
- "fdt_addr=0x48000000\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "ip_dyn=yes\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=1\0" \
- "mmcroot=2\0" \
- "update_offset=0x42\0" \
- "update_filename=flash.bin\0" \
- "update_bootimg=" \
- "mmc dev ${mmcdev} ; " \
- "if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "mmc write ${loadaddr} ${update_offset} ${fw_sz} ; " \
- "fi\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if run loadfdt; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi;\0 " \
- "nfsroot=/nfs\0" \
- "netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp " \
- "nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${loadaddr} ${image}; " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi;\0" \
-
/* Link Definitions */
#define CFG_SYS_INIT_RAM_ADDR 0x40000000
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index 0ae4fc5..8de930e 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -19,8 +19,11 @@
*/
/* Initial RAM for temporary stack, global data */
#define CFG_SYS_INIT_RAM_SIZE 0x10000
+#define CFG_SYS_SRAM_BASE 0x80000000
+#define CFG_SYS_SRAM_SIZE 0x00080000
+
#define CFG_SYS_INIT_RAM_ADDR \
- (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CFG_SYS_INIT_RAM_SIZE)
+ (CFG_SYS_SRAM_BASE + CFG_SYS_SRAM_SIZE - CFG_SYS_INIT_RAM_SIZE)
/* SDRAM Configuration (for final code, data, stack, heap) */
#define CFG_SYS_SDRAM_BASE 0x88000000
diff --git a/include/configs/qcom.h b/include/configs/qcom.h
index 5b5ebbd..9b41ab9 100644
--- a/include/configs/qcom.h
+++ b/include/configs/qcom.h
@@ -11,4 +11,9 @@
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
+// 2a5aa852-b856-4d97-baa9-5c5f4421551f
+#define QUALCOMM_UBOOT_BOOT_IMAGE_GUID \
+ EFI_GUID(0x2a5aa852, 0xb856, 0x4d97, 0xba, 0xa9, \
+ 0x5c, 0x5f, 0x44, 0x21, 0x55, 0x1f)
+
#endif
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 4e0b3c6..0a5f23e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -12,13 +12,4 @@
#include "mv-common.h"
-/*
- * Environment variables configurations
- */
-#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
- "=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT \
- "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
- "x_bootcmd_usb=usb start\0" \
- "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
-
#endif /* _CONFIG_SHEEVAPLUG_H */
diff --git a/include/configs/x240.h b/include/configs/x240.h
index 3601df5..05241f3 100644
--- a/include/configs/x240.h
+++ b/include/configs/x240.h
@@ -11,22 +11,14 @@
/* additions for new ARM relocation support */
#define CFG_SYS_SDRAM_BASE 0x200000000
-#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400, 460800, 921600 }
-
/* Default Env vars */
-
-#define BOOT_TARGET_DEVICES(func) \
- func(USB, usb, 0) \
- func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
+#define BOOT_TARGETS "usb dhcp"
#define CFG_EXTRA_ENV_SETTINGS \
- BOOTENV \
"kernel_addr_r=0x202000000\0" \
"fdt_addr_r=0x201000000\0" \
"ramdisk_addr_r=0x206000000\0" \
+ "boot_targets=" BOOT_TARGETS "\0" \
"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
/*
diff --git a/include/configs/x250.h b/include/configs/x250.h
new file mode 100644
index 0000000..39f523f
--- /dev/null
+++ b/include/configs/x250.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2024 Allied Telesis
+ */
+
+#ifndef __X250_H_
+#define __X250_H_
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CFG_SYS_TCLK 250000000 /* 250MHz */
+
+/* additions for new ARM relocation support */
+#define CFG_SYS_SDRAM_BASE 0x00000000
+
+#define BOOT_TARGETS "usb scsi pxe dhcp"
+
+#define CFG_EXTRA_ENV_SETTINGS \
+ "scriptaddr=0x6d00000\0" \
+ "pxefile_addr_r=0x6e00000\0" \
+ "fdt_addr_r=0x6f00000\0" \
+ "kernel_addr_r=0x7000000\0" \
+ "ramdisk_addr_r=0xa000000\0" \
+ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "boot_targets=" BOOT_TARGETS "\0"
+
+#endif /* __X250_H_ */
diff --git a/include/configs/x530.h b/include/configs/x530.h
index 982b129..c7bfd1d 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -18,30 +18,14 @@
#define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
#endif
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
/* NAND */
#define BBT_CUSTOM_SCAN
#define BBT_CUSTOM_SCAN_PAGE 0
#define BBT_CUSTOM_SCAN_POSITION 2048
-/* SPI NOR flash default params, used by sf commands */
-
#define MTDPARTS_MTDOOPS "errlog"
-/* Partition support */
-
-/* Additional FS support/configuration */
-
-/* Environment in SPI NOR flash */
-
-/* NAND */
-
#include <asm/arch/config.h>
/* Keep device tree and initrd in low memory so the kernel can access them */
diff --git a/include/dfu.h b/include/dfu.h
index e25588c..12f9dfc 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -24,6 +24,7 @@
DFU_DEV_SF,
DFU_DEV_MTD,
DFU_DEV_VIRT,
+ DFU_DEV_SCSI,
};
enum dfu_layout {
@@ -99,6 +100,19 @@
int dev_num;
};
+struct scsi_internal_data {
+ int lun;
+
+ /* RAW programming */
+ unsigned int lba_start;
+ unsigned int lba_size;
+ unsigned int lba_blk_size;
+
+ /* FAT/EXT */
+ unsigned int dev; // Always 0???
+ unsigned int part;
+};
+
#if defined(CONFIG_DFU_NAME_MAX_SIZE)
#define DFU_NAME_SIZE CONFIG_DFU_NAME_MAX_SIZE
#else
@@ -126,6 +140,7 @@
struct ram_internal_data ram;
struct sf_internal_data sf;
struct virt_internal_data virt;
+ struct scsi_internal_data scsi;
} data;
int (*get_medium_size)(struct dfu_entity *dfu, u64 *size);
@@ -516,6 +531,18 @@
}
#endif
+#if CONFIG_IS_ENABLED(DFU_SCSI)
+int dfu_fill_entity_scsi(struct dfu_entity *dfu, char *devstr,
+ char **argv, int argc);
+#else
+static inline int dfu_fill_entity_scsi(struct dfu_entity *dfu, char *devstr,
+ char **argv, int argc)
+{
+ puts("SCSI support not available!\n");
+ return -1;
+}
+#endif
+
extern bool dfu_reinit_needed;
extern bool dfu_alt_info_changed;
diff --git a/include/dm/of_access.h b/include/dm/of_access.h
index de740d4..44143a5 100644
--- a/include/dm/of_access.h
+++ b/include/dm/of_access.h
@@ -454,6 +454,92 @@
}
/**
+ * of_root_parse_phandle - Resolve a phandle property to a device_node pointer
+ * from a root node
+ * @root: Pointer to root device tree node (default root node if NULL)
+ * @np: Pointer to device node holding phandle property
+ * @phandle_name: Name of property holding a phandle value
+ * @index: For properties holding a table of phandles, this is the index into
+ * the table
+ *
+ * Return:
+ * the device_node pointer with refcount incremented. Use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_root_parse_phandle(struct device_node *root,
+ const struct device_node *np,
+ const char *phandle_name, int index);
+
+/**
+ * of_root_parse_phandle_with_args() - Find a node pointed by phandle in a list
+ * from a root node
+ *
+ * @root: pointer to root device tree node (default root node if NULL)
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @cells_count: Cell count to use if @cells_name is NULL
+ * @index: index of a phandle to parse out
+ * @out_args: optional pointer to output arguments structure (will be filled)
+ * Return:
+ * 0 on success (with @out_args filled out if not NULL), -ENOENT if
+ * @list_name does not exist, -EINVAL if a phandle was not found,
+ * @cells_name could not be found, the arguments were truncated or there
+ * were too many arguments.
+ *
+ * This function is useful to parse lists of phandles and their arguments.
+ * Returns 0 on success and fills out_args, on error returns appropriate
+ * errno value.
+ *
+ * Caller is responsible to call of_node_put() on the returned out_args->np
+ * pointer.
+ *
+ * Example:
+ *
+ * .. code-block::
+ *
+ * phandle1: node1 {
+ * #list-cells = <2>;
+ * };
+ * phandle2: node2 {
+ * #list-cells = <1>;
+ * };
+ * node3 {
+ * list = <&phandle1 1 2 &phandle2 3>;
+ * };
+ *
+ * To get a device_node of the `node2' node you may call this:
+ * of_root_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args);
+ */
+int of_root_parse_phandle_with_args(struct device_node *root,
+ const struct device_node *np,
+ const char *list_name, const char *cells_name,
+ int cells_count, int index,
+ struct of_phandle_args *out_args);
+
+/**
+ * of_root_count_phandle_with_args() - Count the number of phandle in a list
+ * from a root node
+ *
+ * @root: pointer to root device tree node (default root node if NULL)
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @cells_count: Cell count to use if @cells_name is NULL
+ * Return:
+ * number of phandle found, -ENOENT if @list_name does not exist,
+ * -EINVAL if a phandle was not found, @cells_name could not be found,
+ * the arguments were truncated or there were too many arguments.
+ *
+ * Returns number of phandle found on success, on error returns appropriate
+ * errno value.
+ */
+int of_root_count_phandle_with_args(struct device_node *root,
+ const struct device_node *np,
+ const char *list_name, const char *cells_name,
+ int cells_count);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
index 0787758..890f0e6 100644
--- a/include/dm/ofnode.h
+++ b/include/dm/ofnode.h
@@ -848,6 +848,18 @@
const char ***listp);
/**
+ * ofnode_parse_phandle() - Resolve a phandle property to an ofnode
+ *
+ * @node: node to check
+ * @phandle_name: Name of property holding a phandle value
+ * @index: For properties holding a table of phandles, this is the index into
+ * the table
+ * Return: ofnode that the phandle points to or ofnode_null() on error.
+ */
+ofnode ofnode_parse_phandle(ofnode node, const char *phandle_name,
+ int index);
+
+/**
* ofnode_parse_phandle_with_args() - Find a node pointed by phandle in a list
*
* This function is useful to parse lists of phandles and their arguments.
@@ -910,6 +922,86 @@
const char *cells_name, int cell_count);
/**
+ * oftree_parse_phandle() - Resolve a phandle property to an ofnode
+ * from a root node
+ *
+ * @tree: device tree to use
+ * @node: node to check
+ * @phandle_name: Name of property holding a phandle value
+ * @index: For properties holding a table of phandles, this is the index into
+ * the table
+ * Return: ofnode that the phandle points to or ofnode_null() on error.
+ */
+ofnode oftree_parse_phandle(oftree tree, ofnode node, const char *phandle_name,
+ int index);
+
+/**
+ * oftree_parse_phandle_with_args() - Find a node pointed by phandle in a list
+ * from a root node
+ *
+ * This function is useful to parse lists of phandles and their arguments.
+ * Returns 0 on success and fills out_args, on error returns appropriate
+ * errno value.
+ *
+ * Caller is responsible to call of_node_put() on the returned out_args->np
+ * pointer.
+ *
+ * Example:
+ *
+ * .. code-block::
+ *
+ * phandle1: node1 {
+ * #list-cells = <2>;
+ * };
+ * phandle2: node2 {
+ * #list-cells = <1>;
+ * };
+ * node3 {
+ * list = <&phandle1 1 2 &phandle2 3>;
+ * };
+ *
+ * To get a device_node of the `node2' node you may call this:
+ * oftree_parse_phandle_with_args(node3, "list", "#list-cells", 0, 1, &args);
+ *
+ * @tree: device tree to use
+ * @node: device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @cell_count: Cell count to use if @cells_name is NULL
+ * @index: index of a phandle to parse out
+ * @out_args: optional pointer to output arguments structure (will be filled)
+ * Return:
+ * 0 on success (with @out_args filled out if not NULL), -ENOENT if
+ * @list_name does not exist, -EINVAL if a phandle was not found,
+ * @cells_name could not be found, the arguments were truncated or there
+ * were too many arguments.
+ */
+int oftree_parse_phandle_with_args(oftree tree, ofnode node, const char *list_name,
+ const char *cells_name, int cell_count,
+ int index,
+ struct ofnode_phandle_args *out_args);
+
+/**
+ * oftree_count_phandle_with_args() - Count number of phandle in a list
+ * from a root node
+ *
+ * This function is useful to count phandles into a list.
+ * Returns number of phandle on success, on error returns appropriate
+ * errno value.
+ *
+ * @tree: device tree to use
+ * @node: device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @cell_count: Cell count to use if @cells_name is NULL
+ * Return:
+ * number of phandle on success, -ENOENT if @list_name does not exist,
+ * -EINVAL if a phandle was not found, @cells_name could not be found.
+ */
+int oftree_count_phandle_with_args(oftree tree, ofnode node, const char *list_name,
+ const char *cells_name, int cell_count);
+
+/**
* ofnode_path() - find a node by full path
*
* This uses the control FDT.
@@ -1629,6 +1721,21 @@
const char *ofnode_options_read_str(const char *prop_name);
/**
+ * ofnode_options_get_by_phandle() - Get a ofnode from phandle from the U-Boot options
+ *
+ * This reads a property from the /options/u-boot/ node of the devicetree.
+ *
+ * This only works with the control FDT.
+ *
+ * See dtschema/schemas/options/u-boot.yaml in dt-schema project for bindings
+ *
+ * @prop_name: property name to look up
+ * @nodep: pointer to ofnode where node is stored
+ * Return: 0, if found, or negative error if not
+ */
+int ofnode_options_get_by_phandle(const char *prop_name, ofnode *nodep);
+
+/**
* ofnode_read_bootscript_address() - Read bootscr-address or bootscr-ram-offset
*
* @bootscr_address: pointer to 64bit address where bootscr-address property value
diff --git a/include/dm/root.h b/include/dm/root.h
index b2f30a8..5651b86 100644
--- a/include/dm/root.h
+++ b/include/dm/root.h
@@ -167,8 +167,18 @@
* Return: 0 if OK, -ve on error
*/
int dm_remove_devices_flags(uint flags);
+
+/**
+ * dm_remove_devices_active - Call remove function of all active drivers heeding
+ * device dependencies as far as know, i.e. removing
+ * devices marked with DM_FLAG_VITAL last.
+ *
+ * All active devices will be removed
+ */
+void dm_remove_devices_active(void);
#else
static inline int dm_remove_devices_flags(uint flags) { return 0; }
+static inline void dm_remove_devices_active(void) { }
#endif
/**
diff --git a/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h
deleted file mode 100644
index 06f198e..0000000
--- a/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-/*
- * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
- * Author: Jian Hu <jian.hu@amlogic.com>
- *
- * Copyright (c) 2023, SberDevices. All Rights Reserved.
- * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
- */
-
-#ifndef __A1_PERIPHERALS_CLKC_H
-#define __A1_PERIPHERALS_CLKC_H
-
-#define CLKID_XTAL_IN 0
-#define CLKID_FIXPLL_IN 1
-#define CLKID_USB_PHY_IN 2
-#define CLKID_USB_CTRL_IN 3
-#define CLKID_HIFIPLL_IN 4
-#define CLKID_SYSPLL_IN 5
-#define CLKID_DDS_IN 6
-#define CLKID_SYS 7
-#define CLKID_CLKTREE 8
-#define CLKID_RESET_CTRL 9
-#define CLKID_ANALOG_CTRL 10
-#define CLKID_PWR_CTRL 11
-#define CLKID_PAD_CTRL 12
-#define CLKID_SYS_CTRL 13
-#define CLKID_TEMP_SENSOR 14
-#define CLKID_AM2AXI_DIV 15
-#define CLKID_SPICC_B 16
-#define CLKID_SPICC_A 17
-#define CLKID_MSR 18
-#define CLKID_AUDIO 19
-#define CLKID_JTAG_CTRL 20
-#define CLKID_SARADC_EN 21
-#define CLKID_PWM_EF 22
-#define CLKID_PWM_CD 23
-#define CLKID_PWM_AB 24
-#define CLKID_CEC 25
-#define CLKID_I2C_S 26
-#define CLKID_IR_CTRL 27
-#define CLKID_I2C_M_D 28
-#define CLKID_I2C_M_C 29
-#define CLKID_I2C_M_B 30
-#define CLKID_I2C_M_A 31
-#define CLKID_ACODEC 32
-#define CLKID_OTP 33
-#define CLKID_SD_EMMC_A 34
-#define CLKID_USB_PHY 35
-#define CLKID_USB_CTRL 36
-#define CLKID_SYS_DSPB 37
-#define CLKID_SYS_DSPA 38
-#define CLKID_DMA 39
-#define CLKID_IRQ_CTRL 40
-#define CLKID_NIC 41
-#define CLKID_GIC 42
-#define CLKID_UART_C 43
-#define CLKID_UART_B 44
-#define CLKID_UART_A 45
-#define CLKID_SYS_PSRAM 46
-#define CLKID_RSA 47
-#define CLKID_CORESIGHT 48
-#define CLKID_AM2AXI_VAD 49
-#define CLKID_AUDIO_VAD 50
-#define CLKID_AXI_DMC 51
-#define CLKID_AXI_PSRAM 52
-#define CLKID_RAMB 53
-#define CLKID_RAMA 54
-#define CLKID_AXI_SPIFC 55
-#define CLKID_AXI_NIC 56
-#define CLKID_AXI_DMA 57
-#define CLKID_CPU_CTRL 58
-#define CLKID_ROM 59
-#define CLKID_PROC_I2C 60
-#define CLKID_DSPA_SEL 61
-#define CLKID_DSPB_SEL 62
-#define CLKID_DSPA_EN 63
-#define CLKID_DSPA_EN_NIC 64
-#define CLKID_DSPB_EN 65
-#define CLKID_DSPB_EN_NIC 66
-#define CLKID_RTC 67
-#define CLKID_CECA_32K 68
-#define CLKID_CECB_32K 69
-#define CLKID_24M 70
-#define CLKID_12M 71
-#define CLKID_FCLK_DIV2_DIVN 72
-#define CLKID_GEN 73
-#define CLKID_SARADC_SEL 74
-#define CLKID_SARADC 75
-#define CLKID_PWM_A 76
-#define CLKID_PWM_B 77
-#define CLKID_PWM_C 78
-#define CLKID_PWM_D 79
-#define CLKID_PWM_E 80
-#define CLKID_PWM_F 81
-#define CLKID_SPICC 82
-#define CLKID_TS 83
-#define CLKID_SPIFC 84
-#define CLKID_USB_BUS 85
-#define CLKID_SD_EMMC 86
-#define CLKID_PSRAM 87
-#define CLKID_DMC 88
-#define CLKID_SYS_A_SEL 89
-#define CLKID_SYS_A_DIV 90
-#define CLKID_SYS_A 91
-#define CLKID_SYS_B_SEL 92
-#define CLKID_SYS_B_DIV 93
-#define CLKID_SYS_B 94
-#define CLKID_DSPA_A_SEL 95
-#define CLKID_DSPA_A_DIV 96
-#define CLKID_DSPA_A 97
-#define CLKID_DSPA_B_SEL 98
-#define CLKID_DSPA_B_DIV 99
-#define CLKID_DSPA_B 100
-#define CLKID_DSPB_A_SEL 101
-#define CLKID_DSPB_A_DIV 102
-#define CLKID_DSPB_A 103
-#define CLKID_DSPB_B_SEL 104
-#define CLKID_DSPB_B_DIV 105
-#define CLKID_DSPB_B 106
-#define CLKID_RTC_32K_IN 107
-#define CLKID_RTC_32K_DIV 108
-#define CLKID_RTC_32K_XTAL 109
-#define CLKID_RTC_32K_SEL 110
-#define CLKID_CECB_32K_IN 111
-#define CLKID_CECB_32K_DIV 112
-#define CLKID_CECB_32K_SEL_PRE 113
-#define CLKID_CECB_32K_SEL 114
-#define CLKID_CECA_32K_IN 115
-#define CLKID_CECA_32K_DIV 116
-#define CLKID_CECA_32K_SEL_PRE 117
-#define CLKID_CECA_32K_SEL 118
-#define CLKID_DIV2_PRE 119
-#define CLKID_24M_DIV2 120
-#define CLKID_GEN_SEL 121
-#define CLKID_GEN_DIV 122
-#define CLKID_SARADC_DIV 123
-#define CLKID_PWM_A_SEL 124
-#define CLKID_PWM_A_DIV 125
-#define CLKID_PWM_B_SEL 126
-#define CLKID_PWM_B_DIV 127
-#define CLKID_PWM_C_SEL 128
-#define CLKID_PWM_C_DIV 129
-#define CLKID_PWM_D_SEL 130
-#define CLKID_PWM_D_DIV 131
-#define CLKID_PWM_E_SEL 132
-#define CLKID_PWM_E_DIV 133
-#define CLKID_PWM_F_SEL 134
-#define CLKID_PWM_F_DIV 135
-#define CLKID_SPICC_SEL 136
-#define CLKID_SPICC_DIV 137
-#define CLKID_SPICC_SEL2 138
-#define CLKID_TS_DIV 139
-#define CLKID_SPIFC_SEL 140
-#define CLKID_SPIFC_DIV 141
-#define CLKID_SPIFC_SEL2 142
-#define CLKID_USB_BUS_SEL 143
-#define CLKID_USB_BUS_DIV 144
-#define CLKID_SD_EMMC_SEL 145
-#define CLKID_SD_EMMC_DIV 146
-#define CLKID_SD_EMMC_SEL2 147
-#define CLKID_PSRAM_SEL 148
-#define CLKID_PSRAM_DIV 149
-#define CLKID_PSRAM_SEL2 150
-#define CLKID_DMC_SEL 151
-#define CLKID_DMC_DIV 152
-#define CLKID_DMC_SEL2 153
-
-#endif /* __A1_PERIPHERALS_CLKC_H */
diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
deleted file mode 100644
index 2b660c0..0000000
--- a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-/*
- * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
- * Author: Jian Hu <jian.hu@amlogic.com>
- *
- * Copyright (c) 2023, SberDevices. All Rights Reserved.
- * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
- */
-
-#ifndef __A1_PLL_CLKC_H
-#define __A1_PLL_CLKC_H
-
-#define CLKID_FIXED_PLL_DCO 0
-#define CLKID_FIXED_PLL 1
-#define CLKID_FCLK_DIV2_DIV 2
-#define CLKID_FCLK_DIV3_DIV 3
-#define CLKID_FCLK_DIV5_DIV 4
-#define CLKID_FCLK_DIV7_DIV 5
-#define CLKID_FCLK_DIV2 6
-#define CLKID_FCLK_DIV3 7
-#define CLKID_FCLK_DIV5 8
-#define CLKID_FCLK_DIV7 9
-#define CLKID_HIFI_PLL 10
-
-#endif /* __A1_PLL_CLKC_H */
diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h
deleted file mode 100644
index f561f5c..0000000
--- a/include/dt-bindings/clock/axg-audio-clkc.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-/*
- * Copyright (c) 2018 Baylibre SAS.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-#ifndef __AXG_AUDIO_CLKC_BINDINGS_H
-#define __AXG_AUDIO_CLKC_BINDINGS_H
-
-#define AUD_CLKID_DDR_ARB 29
-#define AUD_CLKID_PDM 30
-#define AUD_CLKID_TDMIN_A 31
-#define AUD_CLKID_TDMIN_B 32
-#define AUD_CLKID_TDMIN_C 33
-#define AUD_CLKID_TDMIN_LB 34
-#define AUD_CLKID_TDMOUT_A 35
-#define AUD_CLKID_TDMOUT_B 36
-#define AUD_CLKID_TDMOUT_C 37
-#define AUD_CLKID_FRDDR_A 38
-#define AUD_CLKID_FRDDR_B 39
-#define AUD_CLKID_FRDDR_C 40
-#define AUD_CLKID_TODDR_A 41
-#define AUD_CLKID_TODDR_B 42
-#define AUD_CLKID_TODDR_C 43
-#define AUD_CLKID_LOOPBACK 44
-#define AUD_CLKID_SPDIFIN 45
-#define AUD_CLKID_SPDIFOUT 46
-#define AUD_CLKID_RESAMPLE 47
-#define AUD_CLKID_POWER_DETECT 48
-#define AUD_CLKID_MST_A_MCLK 49
-#define AUD_CLKID_MST_B_MCLK 50
-#define AUD_CLKID_MST_C_MCLK 51
-#define AUD_CLKID_MST_D_MCLK 52
-#define AUD_CLKID_MST_E_MCLK 53
-#define AUD_CLKID_MST_F_MCLK 54
-#define AUD_CLKID_SPDIFOUT_CLK 55
-#define AUD_CLKID_SPDIFIN_CLK 56
-#define AUD_CLKID_PDM_DCLK 57
-#define AUD_CLKID_PDM_SYSCLK 58
-#define AUD_CLKID_MST_A_SCLK 79
-#define AUD_CLKID_MST_B_SCLK 80
-#define AUD_CLKID_MST_C_SCLK 81
-#define AUD_CLKID_MST_D_SCLK 82
-#define AUD_CLKID_MST_E_SCLK 83
-#define AUD_CLKID_MST_F_SCLK 84
-#define AUD_CLKID_MST_A_LRCLK 86
-#define AUD_CLKID_MST_B_LRCLK 87
-#define AUD_CLKID_MST_C_LRCLK 88
-#define AUD_CLKID_MST_D_LRCLK 89
-#define AUD_CLKID_MST_E_LRCLK 90
-#define AUD_CLKID_MST_F_LRCLK 91
-#define AUD_CLKID_TDMIN_A_SCLK_SEL 116
-#define AUD_CLKID_TDMIN_B_SCLK_SEL 117
-#define AUD_CLKID_TDMIN_C_SCLK_SEL 118
-#define AUD_CLKID_TDMIN_LB_SCLK_SEL 119
-#define AUD_CLKID_TDMOUT_A_SCLK_SEL 120
-#define AUD_CLKID_TDMOUT_B_SCLK_SEL 121
-#define AUD_CLKID_TDMOUT_C_SCLK_SEL 122
-#define AUD_CLKID_TDMIN_A_SCLK 123
-#define AUD_CLKID_TDMIN_B_SCLK 124
-#define AUD_CLKID_TDMIN_C_SCLK 125
-#define AUD_CLKID_TDMIN_LB_SCLK 126
-#define AUD_CLKID_TDMOUT_A_SCLK 127
-#define AUD_CLKID_TDMOUT_B_SCLK 128
-#define AUD_CLKID_TDMOUT_C_SCLK 129
-#define AUD_CLKID_TDMIN_A_LRCLK 130
-#define AUD_CLKID_TDMIN_B_LRCLK 131
-#define AUD_CLKID_TDMIN_C_LRCLK 132
-#define AUD_CLKID_TDMIN_LB_LRCLK 133
-#define AUD_CLKID_TDMOUT_A_LRCLK 134
-#define AUD_CLKID_TDMOUT_B_LRCLK 135
-#define AUD_CLKID_TDMOUT_C_LRCLK 136
-#define AUD_CLKID_SPDIFOUT_B 151
-#define AUD_CLKID_SPDIFOUT_B_CLK 152
-#define AUD_CLKID_TDM_MCLK_PAD0 155
-#define AUD_CLKID_TDM_MCLK_PAD1 156
-#define AUD_CLKID_TDM_LRCLK_PAD0 157
-#define AUD_CLKID_TDM_LRCLK_PAD1 158
-#define AUD_CLKID_TDM_LRCLK_PAD2 159
-#define AUD_CLKID_TDM_SCLK_PAD0 160
-#define AUD_CLKID_TDM_SCLK_PAD1 161
-#define AUD_CLKID_TDM_SCLK_PAD2 162
-#define AUD_CLKID_TOP 163
-#define AUD_CLKID_TORAM 164
-#define AUD_CLKID_EQDRC 165
-#define AUD_CLKID_RESAMPLE_B 166
-#define AUD_CLKID_TOVAD 167
-#define AUD_CLKID_LOCKER 168
-#define AUD_CLKID_SPDIFIN_LB 169
-#define AUD_CLKID_FRDDR_D 170
-#define AUD_CLKID_TODDR_D 171
-#define AUD_CLKID_LOOPBACK_B 172
-
-#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
deleted file mode 100644
index 93752ea..0000000
--- a/include/dt-bindings/clock/axg-clkc.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Meson-AXG clock tree IDs
- *
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- */
-
-#ifndef __AXG_CLKC_H
-#define __AXG_CLKC_H
-
-#define CLKID_SYS_PLL 0
-#define CLKID_FIXED_PLL 1
-#define CLKID_FCLK_DIV2 2
-#define CLKID_FCLK_DIV3 3
-#define CLKID_FCLK_DIV4 4
-#define CLKID_FCLK_DIV5 5
-#define CLKID_FCLK_DIV7 6
-#define CLKID_GP0_PLL 7
-#define CLKID_CLK81 10
-#define CLKID_MPLL0 11
-#define CLKID_MPLL1 12
-#define CLKID_MPLL2 13
-#define CLKID_MPLL3 14
-#define CLKID_DDR 15
-#define CLKID_AUDIO_LOCKER 16
-#define CLKID_MIPI_DSI_HOST 17
-#define CLKID_ISA 18
-#define CLKID_PL301 19
-#define CLKID_PERIPHS 20
-#define CLKID_SPICC0 21
-#define CLKID_I2C 22
-#define CLKID_RNG0 23
-#define CLKID_UART0 24
-#define CLKID_MIPI_DSI_PHY 25
-#define CLKID_SPICC1 26
-#define CLKID_PCIE_A 27
-#define CLKID_PCIE_B 28
-#define CLKID_HIU_IFACE 29
-#define CLKID_ASSIST_MISC 30
-#define CLKID_SD_EMMC_B 31
-#define CLKID_SD_EMMC_C 32
-#define CLKID_DMA 33
-#define CLKID_SPI 34
-#define CLKID_AUDIO 35
-#define CLKID_ETH 36
-#define CLKID_UART1 37
-#define CLKID_G2D 38
-#define CLKID_USB0 39
-#define CLKID_USB1 40
-#define CLKID_RESET 41
-#define CLKID_USB 42
-#define CLKID_AHB_ARB0 43
-#define CLKID_EFUSE 44
-#define CLKID_BOOT_ROM 45
-#define CLKID_AHB_DATA_BUS 46
-#define CLKID_AHB_CTRL_BUS 47
-#define CLKID_USB1_DDR_BRIDGE 48
-#define CLKID_USB0_DDR_BRIDGE 49
-#define CLKID_MMC_PCLK 50
-#define CLKID_VPU_INTR 51
-#define CLKID_SEC_AHB_AHB3_BRIDGE 52
-#define CLKID_GIC 53
-#define CLKID_AO_MEDIA_CPU 54
-#define CLKID_AO_AHB_SRAM 55
-#define CLKID_AO_AHB_BUS 56
-#define CLKID_AO_IFACE 57
-#define CLKID_AO_I2C 58
-#define CLKID_SD_EMMC_B_CLK0 59
-#define CLKID_SD_EMMC_C_CLK0 60
-#define CLKID_HIFI_PLL 69
-#define CLKID_PCIE_CML_EN0 79
-#define CLKID_PCIE_CML_EN1 80
-#define CLKID_GEN_CLK 84
-#define CLKID_VPU_0_SEL 92
-#define CLKID_VPU_0 93
-#define CLKID_VPU_1_SEL 95
-#define CLKID_VPU_1 96
-#define CLKID_VPU 97
-#define CLKID_VAPB_0_SEL 99
-#define CLKID_VAPB_0 100
-#define CLKID_VAPB_1_SEL 102
-#define CLKID_VAPB_1 103
-#define CLKID_VAPB_SEL 104
-#define CLKID_VAPB 105
-#define CLKID_VCLK 106
-#define CLKID_VCLK2 107
-#define CLKID_VCLK_DIV1 122
-#define CLKID_VCLK_DIV2 123
-#define CLKID_VCLK_DIV4 124
-#define CLKID_VCLK_DIV6 125
-#define CLKID_VCLK_DIV12 126
-#define CLKID_VCLK2_DIV1 127
-#define CLKID_VCLK2_DIV2 128
-#define CLKID_VCLK2_DIV4 129
-#define CLKID_VCLK2_DIV6 130
-#define CLKID_VCLK2_DIV12 131
-#define CLKID_CTS_ENCL 133
-#define CLKID_VDIN_MEAS 136
-
-#endif /* __AXG_CLKC_H */
diff --git a/include/dt-bindings/clock/qcom,camcc-sdm845.h b/include/dt-bindings/clock/qcom,camcc-sdm845.h
deleted file mode 100644
index 4f7a2d2..0000000
--- a/include/dt-bindings/clock/qcom,camcc-sdm845.h
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_CAM_CC_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_CAM_CC_SDM845_H
-
-/* CAM_CC clock registers */
-#define CAM_CC_BPS_AHB_CLK 0
-#define CAM_CC_BPS_AREG_CLK 1
-#define CAM_CC_BPS_AXI_CLK 2
-#define CAM_CC_BPS_CLK 3
-#define CAM_CC_BPS_CLK_SRC 4
-#define CAM_CC_CAMNOC_ATB_CLK 5
-#define CAM_CC_CAMNOC_AXI_CLK 6
-#define CAM_CC_CCI_CLK 7
-#define CAM_CC_CCI_CLK_SRC 8
-#define CAM_CC_CPAS_AHB_CLK 9
-#define CAM_CC_CPHY_RX_CLK_SRC 10
-#define CAM_CC_CSI0PHYTIMER_CLK 11
-#define CAM_CC_CSI0PHYTIMER_CLK_SRC 12
-#define CAM_CC_CSI1PHYTIMER_CLK 13
-#define CAM_CC_CSI1PHYTIMER_CLK_SRC 14
-#define CAM_CC_CSI2PHYTIMER_CLK 15
-#define CAM_CC_CSI2PHYTIMER_CLK_SRC 16
-#define CAM_CC_CSI3PHYTIMER_CLK 17
-#define CAM_CC_CSI3PHYTIMER_CLK_SRC 18
-#define CAM_CC_CSIPHY0_CLK 19
-#define CAM_CC_CSIPHY1_CLK 20
-#define CAM_CC_CSIPHY2_CLK 21
-#define CAM_CC_CSIPHY3_CLK 22
-#define CAM_CC_FAST_AHB_CLK_SRC 23
-#define CAM_CC_FD_CORE_CLK 24
-#define CAM_CC_FD_CORE_CLK_SRC 25
-#define CAM_CC_FD_CORE_UAR_CLK 26
-#define CAM_CC_ICP_APB_CLK 27
-#define CAM_CC_ICP_ATB_CLK 28
-#define CAM_CC_ICP_CLK 29
-#define CAM_CC_ICP_CLK_SRC 30
-#define CAM_CC_ICP_CTI_CLK 31
-#define CAM_CC_ICP_TS_CLK 32
-#define CAM_CC_IFE_0_AXI_CLK 33
-#define CAM_CC_IFE_0_CLK 34
-#define CAM_CC_IFE_0_CLK_SRC 35
-#define CAM_CC_IFE_0_CPHY_RX_CLK 36
-#define CAM_CC_IFE_0_CSID_CLK 37
-#define CAM_CC_IFE_0_CSID_CLK_SRC 38
-#define CAM_CC_IFE_0_DSP_CLK 39
-#define CAM_CC_IFE_1_AXI_CLK 40
-#define CAM_CC_IFE_1_CLK 41
-#define CAM_CC_IFE_1_CLK_SRC 42
-#define CAM_CC_IFE_1_CPHY_RX_CLK 43
-#define CAM_CC_IFE_1_CSID_CLK 44
-#define CAM_CC_IFE_1_CSID_CLK_SRC 45
-#define CAM_CC_IFE_1_DSP_CLK 46
-#define CAM_CC_IFE_LITE_CLK 47
-#define CAM_CC_IFE_LITE_CLK_SRC 48
-#define CAM_CC_IFE_LITE_CPHY_RX_CLK 49
-#define CAM_CC_IFE_LITE_CSID_CLK 50
-#define CAM_CC_IFE_LITE_CSID_CLK_SRC 51
-#define CAM_CC_IPE_0_AHB_CLK 52
-#define CAM_CC_IPE_0_AREG_CLK 53
-#define CAM_CC_IPE_0_AXI_CLK 54
-#define CAM_CC_IPE_0_CLK 55
-#define CAM_CC_IPE_0_CLK_SRC 56
-#define CAM_CC_IPE_1_AHB_CLK 57
-#define CAM_CC_IPE_1_AREG_CLK 58
-#define CAM_CC_IPE_1_AXI_CLK 59
-#define CAM_CC_IPE_1_CLK 60
-#define CAM_CC_IPE_1_CLK_SRC 61
-#define CAM_CC_JPEG_CLK 62
-#define CAM_CC_JPEG_CLK_SRC 63
-#define CAM_CC_LRME_CLK 64
-#define CAM_CC_LRME_CLK_SRC 65
-#define CAM_CC_MCLK0_CLK 66
-#define CAM_CC_MCLK0_CLK_SRC 67
-#define CAM_CC_MCLK1_CLK 68
-#define CAM_CC_MCLK1_CLK_SRC 69
-#define CAM_CC_MCLK2_CLK 70
-#define CAM_CC_MCLK2_CLK_SRC 71
-#define CAM_CC_MCLK3_CLK 72
-#define CAM_CC_MCLK3_CLK_SRC 73
-#define CAM_CC_PLL0 74
-#define CAM_CC_PLL0_OUT_EVEN 75
-#define CAM_CC_PLL1 76
-#define CAM_CC_PLL1_OUT_EVEN 77
-#define CAM_CC_PLL2 78
-#define CAM_CC_PLL2_OUT_EVEN 79
-#define CAM_CC_PLL3 80
-#define CAM_CC_PLL3_OUT_EVEN 81
-#define CAM_CC_SLOW_AHB_CLK_SRC 82
-#define CAM_CC_SOC_AHB_CLK 83
-#define CAM_CC_SYS_TMR_CLK 84
-
-/* CAM_CC Resets */
-#define TITAN_CAM_CC_CCI_BCR 0
-#define TITAN_CAM_CC_CPAS_BCR 1
-#define TITAN_CAM_CC_CSI0PHY_BCR 2
-#define TITAN_CAM_CC_CSI1PHY_BCR 3
-#define TITAN_CAM_CC_CSI2PHY_BCR 4
-#define TITAN_CAM_CC_MCLK0_BCR 5
-#define TITAN_CAM_CC_MCLK1_BCR 6
-#define TITAN_CAM_CC_MCLK2_BCR 7
-#define TITAN_CAM_CC_MCLK3_BCR 8
-#define TITAN_CAM_CC_TITAN_TOP_BCR 9
-
-/* CAM_CC GDSCRs */
-#define BPS_GDSC 0
-#define IPE_0_GDSC 1
-#define IPE_1_GDSC 2
-#define IFE_0_GDSC 3
-#define IFE_1_GDSC 4
-#define TITAN_TOP_GDSC 5
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,dispcc-sdm845.h b/include/dt-bindings/clock/qcom,dispcc-sdm845.h
deleted file mode 100644
index 4016fd1..0000000
--- a/include/dt-bindings/clock/qcom,dispcc-sdm845.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_DISP_CC_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_DISP_CC_SDM845_H
-
-/* DISP_CC clock registers */
-#define DISP_CC_MDSS_AHB_CLK 0
-#define DISP_CC_MDSS_AXI_CLK 1
-#define DISP_CC_MDSS_BYTE0_CLK 2
-#define DISP_CC_MDSS_BYTE0_CLK_SRC 3
-#define DISP_CC_MDSS_BYTE0_INTF_CLK 4
-#define DISP_CC_MDSS_BYTE1_CLK 5
-#define DISP_CC_MDSS_BYTE1_CLK_SRC 6
-#define DISP_CC_MDSS_BYTE1_INTF_CLK 7
-#define DISP_CC_MDSS_ESC0_CLK 8
-#define DISP_CC_MDSS_ESC0_CLK_SRC 9
-#define DISP_CC_MDSS_ESC1_CLK 10
-#define DISP_CC_MDSS_ESC1_CLK_SRC 11
-#define DISP_CC_MDSS_MDP_CLK 12
-#define DISP_CC_MDSS_MDP_CLK_SRC 13
-#define DISP_CC_MDSS_MDP_LUT_CLK 14
-#define DISP_CC_MDSS_PCLK0_CLK 15
-#define DISP_CC_MDSS_PCLK0_CLK_SRC 16
-#define DISP_CC_MDSS_PCLK1_CLK 17
-#define DISP_CC_MDSS_PCLK1_CLK_SRC 18
-#define DISP_CC_MDSS_ROT_CLK 19
-#define DISP_CC_MDSS_ROT_CLK_SRC 20
-#define DISP_CC_MDSS_RSCC_AHB_CLK 21
-#define DISP_CC_MDSS_RSCC_VSYNC_CLK 22
-#define DISP_CC_MDSS_VSYNC_CLK 23
-#define DISP_CC_MDSS_VSYNC_CLK_SRC 24
-#define DISP_CC_PLL0 25
-#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 26
-#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 27
-#define DISP_CC_MDSS_DP_AUX_CLK 28
-#define DISP_CC_MDSS_DP_AUX_CLK_SRC 29
-#define DISP_CC_MDSS_DP_CRYPTO_CLK 30
-#define DISP_CC_MDSS_DP_CRYPTO_CLK_SRC 31
-#define DISP_CC_MDSS_DP_LINK_CLK 32
-#define DISP_CC_MDSS_DP_LINK_CLK_SRC 33
-#define DISP_CC_MDSS_DP_LINK_INTF_CLK 34
-#define DISP_CC_MDSS_DP_PIXEL1_CLK 35
-#define DISP_CC_MDSS_DP_PIXEL1_CLK_SRC 36
-#define DISP_CC_MDSS_DP_PIXEL_CLK 37
-#define DISP_CC_MDSS_DP_PIXEL_CLK_SRC 38
-
-/* DISP_CC Reset */
-#define DISP_CC_MDSS_RSCC_BCR 0
-
-/* DISP_CC GDSCR */
-#define MDSS_GDSC 0
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h
deleted file mode 100644
index 5630344..0000000
--- a/include/dt-bindings/clock/qcom,gcc-msm8916.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2015 Linaro Limited
- */
-
-#ifndef _DT_BINDINGS_CLK_MSM_GCC_8916_H
-#define _DT_BINDINGS_CLK_MSM_GCC_8916_H
-
-#define GPLL0 0
-#define GPLL0_VOTE 1
-#define BIMC_PLL 2
-#define BIMC_PLL_VOTE 3
-#define GPLL1 4
-#define GPLL1_VOTE 5
-#define GPLL2 6
-#define GPLL2_VOTE 7
-#define PCNOC_BFDCD_CLK_SRC 8
-#define SYSTEM_NOC_BFDCD_CLK_SRC 9
-#define CAMSS_AHB_CLK_SRC 10
-#define APSS_AHB_CLK_SRC 11
-#define CSI0_CLK_SRC 12
-#define CSI1_CLK_SRC 13
-#define GFX3D_CLK_SRC 14
-#define VFE0_CLK_SRC 15
-#define BLSP1_QUP1_I2C_APPS_CLK_SRC 16
-#define BLSP1_QUP1_SPI_APPS_CLK_SRC 17
-#define BLSP1_QUP2_I2C_APPS_CLK_SRC 18
-#define BLSP1_QUP2_SPI_APPS_CLK_SRC 19
-#define BLSP1_QUP3_I2C_APPS_CLK_SRC 20
-#define BLSP1_QUP3_SPI_APPS_CLK_SRC 21
-#define BLSP1_QUP4_I2C_APPS_CLK_SRC 22
-#define BLSP1_QUP4_SPI_APPS_CLK_SRC 23
-#define BLSP1_QUP5_I2C_APPS_CLK_SRC 24
-#define BLSP1_QUP5_SPI_APPS_CLK_SRC 25
-#define BLSP1_QUP6_I2C_APPS_CLK_SRC 26
-#define BLSP1_QUP6_SPI_APPS_CLK_SRC 27
-#define BLSP1_UART1_APPS_CLK_SRC 28
-#define BLSP1_UART2_APPS_CLK_SRC 29
-#define CCI_CLK_SRC 30
-#define CAMSS_GP0_CLK_SRC 31
-#define CAMSS_GP1_CLK_SRC 32
-#define JPEG0_CLK_SRC 33
-#define MCLK0_CLK_SRC 34
-#define MCLK1_CLK_SRC 35
-#define CSI0PHYTIMER_CLK_SRC 36
-#define CSI1PHYTIMER_CLK_SRC 37
-#define CPP_CLK_SRC 38
-#define CRYPTO_CLK_SRC 39
-#define GP1_CLK_SRC 40
-#define GP2_CLK_SRC 41
-#define GP3_CLK_SRC 42
-#define BYTE0_CLK_SRC 43
-#define ESC0_CLK_SRC 44
-#define MDP_CLK_SRC 45
-#define PCLK0_CLK_SRC 46
-#define VSYNC_CLK_SRC 47
-#define PDM2_CLK_SRC 48
-#define SDCC1_APPS_CLK_SRC 49
-#define SDCC2_APPS_CLK_SRC 50
-#define APSS_TCU_CLK_SRC 51
-#define USB_HS_SYSTEM_CLK_SRC 52
-#define VCODEC0_CLK_SRC 53
-#define GCC_BLSP1_AHB_CLK 54
-#define GCC_BLSP1_SLEEP_CLK 55
-#define GCC_BLSP1_QUP1_I2C_APPS_CLK 56
-#define GCC_BLSP1_QUP1_SPI_APPS_CLK 57
-#define GCC_BLSP1_QUP2_I2C_APPS_CLK 58
-#define GCC_BLSP1_QUP2_SPI_APPS_CLK 59
-#define GCC_BLSP1_QUP3_I2C_APPS_CLK 60
-#define GCC_BLSP1_QUP3_SPI_APPS_CLK 61
-#define GCC_BLSP1_QUP4_I2C_APPS_CLK 62
-#define GCC_BLSP1_QUP4_SPI_APPS_CLK 63
-#define GCC_BLSP1_QUP5_I2C_APPS_CLK 64
-#define GCC_BLSP1_QUP5_SPI_APPS_CLK 65
-#define GCC_BLSP1_QUP6_I2C_APPS_CLK 66
-#define GCC_BLSP1_QUP6_SPI_APPS_CLK 67
-#define GCC_BLSP1_UART1_APPS_CLK 68
-#define GCC_BLSP1_UART2_APPS_CLK 69
-#define GCC_BOOT_ROM_AHB_CLK 70
-#define GCC_CAMSS_CCI_AHB_CLK 71
-#define GCC_CAMSS_CCI_CLK 72
-#define GCC_CAMSS_CSI0_AHB_CLK 73
-#define GCC_CAMSS_CSI0_CLK 74
-#define GCC_CAMSS_CSI0PHY_CLK 75
-#define GCC_CAMSS_CSI0PIX_CLK 76
-#define GCC_CAMSS_CSI0RDI_CLK 77
-#define GCC_CAMSS_CSI1_AHB_CLK 78
-#define GCC_CAMSS_CSI1_CLK 79
-#define GCC_CAMSS_CSI1PHY_CLK 80
-#define GCC_CAMSS_CSI1PIX_CLK 81
-#define GCC_CAMSS_CSI1RDI_CLK 82
-#define GCC_CAMSS_CSI_VFE0_CLK 83
-#define GCC_CAMSS_GP0_CLK 84
-#define GCC_CAMSS_GP1_CLK 85
-#define GCC_CAMSS_ISPIF_AHB_CLK 86
-#define GCC_CAMSS_JPEG0_CLK 87
-#define GCC_CAMSS_JPEG_AHB_CLK 88
-#define GCC_CAMSS_JPEG_AXI_CLK 89
-#define GCC_CAMSS_MCLK0_CLK 90
-#define GCC_CAMSS_MCLK1_CLK 91
-#define GCC_CAMSS_MICRO_AHB_CLK 92
-#define GCC_CAMSS_CSI0PHYTIMER_CLK 93
-#define GCC_CAMSS_CSI1PHYTIMER_CLK 94
-#define GCC_CAMSS_AHB_CLK 95
-#define GCC_CAMSS_TOP_AHB_CLK 96
-#define GCC_CAMSS_CPP_AHB_CLK 97
-#define GCC_CAMSS_CPP_CLK 98
-#define GCC_CAMSS_VFE0_CLK 99
-#define GCC_CAMSS_VFE_AHB_CLK 100
-#define GCC_CAMSS_VFE_AXI_CLK 101
-#define GCC_CRYPTO_AHB_CLK 102
-#define GCC_CRYPTO_AXI_CLK 103
-#define GCC_CRYPTO_CLK 104
-#define GCC_OXILI_GMEM_CLK 105
-#define GCC_GP1_CLK 106
-#define GCC_GP2_CLK 107
-#define GCC_GP3_CLK 108
-#define GCC_MDSS_AHB_CLK 109
-#define GCC_MDSS_AXI_CLK 110
-#define GCC_MDSS_BYTE0_CLK 111
-#define GCC_MDSS_ESC0_CLK 112
-#define GCC_MDSS_MDP_CLK 113
-#define GCC_MDSS_PCLK0_CLK 114
-#define GCC_MDSS_VSYNC_CLK 115
-#define GCC_MSS_CFG_AHB_CLK 116
-#define GCC_OXILI_AHB_CLK 117
-#define GCC_OXILI_GFX3D_CLK 118
-#define GCC_PDM2_CLK 119
-#define GCC_PDM_AHB_CLK 120
-#define GCC_PRNG_AHB_CLK 121
-#define GCC_SDCC1_AHB_CLK 122
-#define GCC_SDCC1_APPS_CLK 123
-#define GCC_SDCC2_AHB_CLK 124
-#define GCC_SDCC2_APPS_CLK 125
-#define GCC_GTCU_AHB_CLK 126
-#define GCC_JPEG_TBU_CLK 127
-#define GCC_MDP_TBU_CLK 128
-#define GCC_SMMU_CFG_CLK 129
-#define GCC_VENUS_TBU_CLK 130
-#define GCC_VFE_TBU_CLK 131
-#define GCC_USB2A_PHY_SLEEP_CLK 132
-#define GCC_USB_HS_AHB_CLK 133
-#define GCC_USB_HS_SYSTEM_CLK 134
-#define GCC_VENUS0_AHB_CLK 135
-#define GCC_VENUS0_AXI_CLK 136
-#define GCC_VENUS0_VCODEC0_CLK 137
-#define BIMC_DDR_CLK_SRC 138
-#define GCC_APSS_TCU_CLK 139
-#define GCC_GFX_TCU_CLK 140
-#define BIMC_GPU_CLK_SRC 141
-#define GCC_BIMC_GFX_CLK 142
-#define GCC_BIMC_GPU_CLK 143
-#define ULTAUDIO_LPAIF_PRI_I2S_CLK_SRC 144
-#define ULTAUDIO_LPAIF_SEC_I2S_CLK_SRC 145
-#define ULTAUDIO_LPAIF_AUX_I2S_CLK_SRC 146
-#define ULTAUDIO_XO_CLK_SRC 147
-#define ULTAUDIO_AHBFABRIC_CLK_SRC 148
-#define CODEC_DIGCODEC_CLK_SRC 149
-#define GCC_ULTAUDIO_PCNOC_MPORT_CLK 150
-#define GCC_ULTAUDIO_PCNOC_SWAY_CLK 151
-#define GCC_ULTAUDIO_AVSYNC_XO_CLK 152
-#define GCC_ULTAUDIO_STC_XO_CLK 153
-#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK 154
-#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_LPM_CLK 155
-#define GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK 156
-#define GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK 157
-#define GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK 158
-#define GCC_CODEC_DIGCODEC_CLK 159
-#define GCC_MSS_Q6_BIMC_AXI_CLK 160
-
-/* Indexes for GDSCs */
-#define BIMC_GDSC 0
-#define VENUS_GDSC 1
-#define MDSS_GDSC 2
-#define JPEG_GDSC 3
-#define VFE_GDSC 4
-#define OXILI_GDSC 5
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8996.h b/include/dt-bindings/clock/qcom,gcc-msm8996.h
deleted file mode 100644
index de5c36c..0000000
--- a/include/dt-bindings/clock/qcom,gcc-msm8996.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_MSM_GCC_8996_H
-#define _DT_BINDINGS_CLK_MSM_GCC_8996_H
-
-#define GPLL0_EARLY 0
-#define GPLL0 1
-#define GPLL1_EARLY 2
-#define GPLL1 3
-#define GPLL2_EARLY 4
-#define GPLL2 5
-#define GPLL3_EARLY 6
-#define GPLL3 7
-#define GPLL4_EARLY 8
-#define GPLL4 9
-#define SYSTEM_NOC_CLK_SRC 10
-/* U-Boot: KConfig check in CI erroneously picks this up, it's unused
- * anyway so comment it out for now
- */
-//#define CONFIG _NOC_CLK_SRC 11
-#define PERIPH_NOC_CLK_SRC 12
-#define MMSS_BIMC_GFX_CLK_SRC 13
-#define USB30_MASTER_CLK_SRC 14
-#define USB30_MOCK_UTMI_CLK_SRC 15
-#define USB3_PHY_AUX_CLK_SRC 16
-#define USB20_MASTER_CLK_SRC 17
-#define USB20_MOCK_UTMI_CLK_SRC 18
-#define SDCC1_APPS_CLK_SRC 19
-#define SDCC1_ICE_CORE_CLK_SRC 20
-#define SDCC2_APPS_CLK_SRC 21
-#define SDCC3_APPS_CLK_SRC 22
-#define SDCC4_APPS_CLK_SRC 23
-#define BLSP1_QUP1_SPI_APPS_CLK_SRC 24
-#define BLSP1_QUP1_I2C_APPS_CLK_SRC 25
-#define BLSP1_UART1_APPS_CLK_SRC 26
-#define BLSP1_QUP2_SPI_APPS_CLK_SRC 27
-#define BLSP1_QUP2_I2C_APPS_CLK_SRC 28
-#define BLSP1_UART2_APPS_CLK_SRC 29
-#define BLSP1_QUP3_SPI_APPS_CLK_SRC 30
-#define BLSP1_QUP3_I2C_APPS_CLK_SRC 31
-#define BLSP1_UART3_APPS_CLK_SRC 32
-#define BLSP1_QUP4_SPI_APPS_CLK_SRC 33
-#define BLSP1_QUP4_I2C_APPS_CLK_SRC 34
-#define BLSP1_UART4_APPS_CLK_SRC 35
-#define BLSP1_QUP5_SPI_APPS_CLK_SRC 36
-#define BLSP1_QUP5_I2C_APPS_CLK_SRC 37
-#define BLSP1_UART5_APPS_CLK_SRC 38
-#define BLSP1_QUP6_SPI_APPS_CLK_SRC 39
-#define BLSP1_QUP6_I2C_APPS_CLK_SRC 40
-#define BLSP1_UART6_APPS_CLK_SRC 41
-#define BLSP2_QUP1_SPI_APPS_CLK_SRC 42
-#define BLSP2_QUP1_I2C_APPS_CLK_SRC 43
-#define BLSP2_UART1_APPS_CLK_SRC 44
-#define BLSP2_QUP2_SPI_APPS_CLK_SRC 45
-#define BLSP2_QUP2_I2C_APPS_CLK_SRC 46
-#define BLSP2_UART2_APPS_CLK_SRC 47
-#define BLSP2_QUP3_SPI_APPS_CLK_SRC 48
-#define BLSP2_QUP3_I2C_APPS_CLK_SRC 49
-#define BLSP2_UART3_APPS_CLK_SRC 50
-#define BLSP2_QUP4_SPI_APPS_CLK_SRC 51
-#define BLSP2_QUP4_I2C_APPS_CLK_SRC 52
-#define BLSP2_UART4_APPS_CLK_SRC 53
-#define BLSP2_QUP5_SPI_APPS_CLK_SRC 54
-#define BLSP2_QUP5_I2C_APPS_CLK_SRC 55
-#define BLSP2_UART5_APPS_CLK_SRC 56
-#define BLSP2_QUP6_SPI_APPS_CLK_SRC 57
-#define BLSP2_QUP6_I2C_APPS_CLK_SRC 58
-#define BLSP2_UART6_APPS_CLK_SRC 59
-#define PDM2_CLK_SRC 60
-#define TSIF_REF_CLK_SRC 61
-#define CE1_CLK_SRC 62
-#define GCC_SLEEP_CLK_SRC 63
-#define BIMC_CLK_SRC 64
-#define HMSS_AHB_CLK_SRC 65
-#define BIMC_HMSS_AXI_CLK_SRC 66
-#define HMSS_RBCPR_CLK_SRC 67
-#define HMSS_GPLL0_CLK_SRC 68
-#define GP1_CLK_SRC 69
-#define GP2_CLK_SRC 70
-#define GP3_CLK_SRC 71
-#define PCIE_AUX_CLK_SRC 72
-#define UFS_AXI_CLK_SRC 73
-#define UFS_ICE_CORE_CLK_SRC 74
-#define QSPI_SER_CLK_SRC 75
-#define GCC_SYS_NOC_AXI_CLK 76
-#define GCC_SYS_NOC_HMSS_AHB_CLK 77
-#define GCC_SNOC_CNOC_AHB_CLK 78
-#define GCC_SNOC_PNOC_AHB_CLK 79
-#define GCC_SYS_NOC_AT_CLK 80
-#define GCC_SYS_NOC_USB3_AXI_CLK 81
-#define GCC_SYS_NOC_UFS_AXI_CLK 82
-#define GCC_CFG_NOC_AHB_CLK 83
-#define GCC_PERIPH_NOC_AHB_CLK 84
-#define GCC_PERIPH_NOC_USB20_AHB_CLK 85
-#define GCC_TIC_CLK 86
-#define GCC_IMEM_AXI_CLK 87
-#define GCC_MMSS_SYS_NOC_AXI_CLK 88
-#define GCC_MMSS_NOC_CFG_AHB_CLK 89
-#define GCC_MMSS_BIMC_GFX_CLK 90
-#define GCC_USB30_MASTER_CLK 91
-#define GCC_USB30_SLEEP_CLK 92
-#define GCC_USB30_MOCK_UTMI_CLK 93
-#define GCC_USB3_PHY_AUX_CLK 94
-#define GCC_USB3_PHY_PIPE_CLK 95
-#define GCC_USB20_MASTER_CLK 96
-#define GCC_USB20_SLEEP_CLK 97
-#define GCC_USB20_MOCK_UTMI_CLK 98
-#define GCC_USB_PHY_CFG_AHB2PHY_CLK 99
-#define GCC_SDCC1_APPS_CLK 100
-#define GCC_SDCC1_AHB_CLK 101
-#define GCC_SDCC1_ICE_CORE_CLK 102
-#define GCC_SDCC2_APPS_CLK 103
-#define GCC_SDCC2_AHB_CLK 104
-#define GCC_SDCC3_APPS_CLK 105
-#define GCC_SDCC3_AHB_CLK 106
-#define GCC_SDCC4_APPS_CLK 107
-#define GCC_SDCC4_AHB_CLK 108
-#define GCC_BLSP1_AHB_CLK 109
-#define GCC_BLSP1_SLEEP_CLK 110
-#define GCC_BLSP1_QUP1_SPI_APPS_CLK 111
-#define GCC_BLSP1_QUP1_I2C_APPS_CLK 112
-#define GCC_BLSP1_UART1_APPS_CLK 113
-#define GCC_BLSP1_QUP2_SPI_APPS_CLK 114
-#define GCC_BLSP1_QUP2_I2C_APPS_CLK 115
-#define GCC_BLSP1_UART2_APPS_CLK 116
-#define GCC_BLSP1_QUP3_SPI_APPS_CLK 117
-#define GCC_BLSP1_QUP3_I2C_APPS_CLK 118
-#define GCC_BLSP1_UART3_APPS_CLK 119
-#define GCC_BLSP1_QUP4_SPI_APPS_CLK 120
-#define GCC_BLSP1_QUP4_I2C_APPS_CLK 121
-#define GCC_BLSP1_UART4_APPS_CLK 122
-#define GCC_BLSP1_QUP5_SPI_APPS_CLK 123
-#define GCC_BLSP1_QUP5_I2C_APPS_CLK 124
-#define GCC_BLSP1_UART5_APPS_CLK 125
-#define GCC_BLSP1_QUP6_SPI_APPS_CLK 126
-#define GCC_BLSP1_QUP6_I2C_APPS_CLK 127
-#define GCC_BLSP1_UART6_APPS_CLK 128
-#define GCC_BLSP2_AHB_CLK 129
-#define GCC_BLSP2_SLEEP_CLK 130
-#define GCC_BLSP2_QUP1_SPI_APPS_CLK 131
-#define GCC_BLSP2_QUP1_I2C_APPS_CLK 132
-#define GCC_BLSP2_UART1_APPS_CLK 133
-#define GCC_BLSP2_QUP2_SPI_APPS_CLK 134
-#define GCC_BLSP2_QUP2_I2C_APPS_CLK 135
-#define GCC_BLSP2_UART2_APPS_CLK 136
-#define GCC_BLSP2_QUP3_SPI_APPS_CLK 137
-#define GCC_BLSP2_QUP3_I2C_APPS_CLK 138
-#define GCC_BLSP2_UART3_APPS_CLK 139
-#define GCC_BLSP2_QUP4_SPI_APPS_CLK 140
-#define GCC_BLSP2_QUP4_I2C_APPS_CLK 141
-#define GCC_BLSP2_UART4_APPS_CLK 142
-#define GCC_BLSP2_QUP5_SPI_APPS_CLK 143
-#define GCC_BLSP2_QUP5_I2C_APPS_CLK 144
-#define GCC_BLSP2_UART5_APPS_CLK 145
-#define GCC_BLSP2_QUP6_SPI_APPS_CLK 146
-#define GCC_BLSP2_QUP6_I2C_APPS_CLK 147
-#define GCC_BLSP2_UART6_APPS_CLK 148
-#define GCC_PDM_AHB_CLK 149
-#define GCC_PDM_XO4_CLK 150
-#define GCC_PDM2_CLK 151
-#define GCC_PRNG_AHB_CLK 152
-#define GCC_TSIF_AHB_CLK 153
-#define GCC_TSIF_REF_CLK 154
-#define GCC_TSIF_INACTIVITY_TIMERS_CLK 155
-#define GCC_TCSR_AHB_CLK 156
-#define GCC_BOOT_ROM_AHB_CLK 157
-#define GCC_MSG_RAM_AHB_CLK 158
-#define GCC_TLMM_AHB_CLK 159
-#define GCC_TLMM_CLK 160
-#define GCC_MPM_AHB_CLK 161
-#define GCC_SPMI_SER_CLK 162
-#define GCC_SPMI_CNOC_AHB_CLK 163
-#define GCC_CE1_CLK 164
-#define GCC_CE1_AXI_CLK 165
-#define GCC_CE1_AHB_CLK 166
-#define GCC_BIMC_HMSS_AXI_CLK 167
-#define GCC_BIMC_GFX_CLK 168
-#define GCC_HMSS_AHB_CLK 169
-#define GCC_HMSS_SLV_AXI_CLK 170
-#define GCC_HMSS_MSTR_AXI_CLK 171
-#define GCC_HMSS_RBCPR_CLK 172
-#define GCC_GP1_CLK 173
-#define GCC_GP2_CLK 174
-#define GCC_GP3_CLK 175
-#define GCC_PCIE_0_SLV_AXI_CLK 176
-#define GCC_PCIE_0_MSTR_AXI_CLK 177
-#define GCC_PCIE_0_CFG_AHB_CLK 178
-#define GCC_PCIE_0_AUX_CLK 179
-#define GCC_PCIE_0_PIPE_CLK 180
-#define GCC_PCIE_1_SLV_AXI_CLK 181
-#define GCC_PCIE_1_MSTR_AXI_CLK 182
-#define GCC_PCIE_1_CFG_AHB_CLK 183
-#define GCC_PCIE_1_AUX_CLK 184
-#define GCC_PCIE_1_PIPE_CLK 185
-#define GCC_PCIE_2_SLV_AXI_CLK 186
-#define GCC_PCIE_2_MSTR_AXI_CLK 187
-#define GCC_PCIE_2_CFG_AHB_CLK 188
-#define GCC_PCIE_2_AUX_CLK 189
-#define GCC_PCIE_2_PIPE_CLK 190
-#define GCC_PCIE_PHY_CFG_AHB_CLK 191
-#define GCC_PCIE_PHY_AUX_CLK 192
-#define GCC_UFS_AXI_CLK 193
-#define GCC_UFS_AHB_CLK 194
-#define GCC_UFS_TX_CFG_CLK 195
-#define GCC_UFS_RX_CFG_CLK 196
-#define GCC_UFS_TX_SYMBOL_0_CLK 197
-#define GCC_UFS_RX_SYMBOL_0_CLK 198
-#define GCC_UFS_RX_SYMBOL_1_CLK 199
-#define GCC_UFS_UNIPRO_CORE_CLK 200
-#define GCC_UFS_ICE_CORE_CLK 201
-#define GCC_UFS_SYS_CLK_CORE_CLK 202
-#define GCC_UFS_TX_SYMBOL_CLK_CORE_CLK 203
-#define GCC_AGGRE0_SNOC_AXI_CLK 204
-#define GCC_AGGRE0_CNOC_AHB_CLK 205
-#define GCC_SMMU_AGGRE0_AXI_CLK 206
-#define GCC_SMMU_AGGRE0_AHB_CLK 207
-#define GCC_AGGRE1_PNOC_AHB_CLK 208
-#define GCC_AGGRE2_UFS_AXI_CLK 209
-#define GCC_AGGRE2_USB3_AXI_CLK 210
-#define GCC_QSPI_AHB_CLK 211
-#define GCC_QSPI_SER_CLK 212
-#define GCC_USB3_CLKREF_CLK 213
-#define GCC_HDMI_CLKREF_CLK 214
-#define GCC_UFS_CLKREF_CLK 215
-#define GCC_PCIE_CLKREF_CLK 216
-#define GCC_RX2_USB2_CLKREF_CLK 217
-#define GCC_RX1_USB2_CLKREF_CLK 218
-#define GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK 219
-#define GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK 220
-#define GCC_EDP_CLKREF_CLK 221
-#define GCC_MSS_CFG_AHB_CLK 222
-#define GCC_MSS_Q6_BIMC_AXI_CLK 223
-#define GCC_MSS_SNOC_AXI_CLK 224
-#define GCC_MSS_MNOC_BIMC_AXI_CLK 225
-#define GCC_DCC_AHB_CLK 226
-#define GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK 227
-#define GCC_MMSS_GPLL0_DIV_CLK 228
-#define GCC_MSS_GPLL0_DIV_CLK 229
-
-#define GCC_SYSTEM_NOC_BCR 0
-#define GCC_CONFIG_NOC_BCR 1
-#define GCC_PERIPH_NOC_BCR 2
-#define GCC_IMEM_BCR 3
-#define GCC_MMSS_BCR 4
-#define GCC_PIMEM_BCR 5
-#define GCC_QDSS_BCR 6
-#define GCC_USB_30_BCR 7
-#define GCC_USB_20_BCR 8
-#define GCC_QUSB2PHY_PRIM_BCR 9
-#define GCC_QUSB2PHY_SEC_BCR 10
-#define GCC_USB_PHY_CFG_AHB2PHY_BCR 11
-#define GCC_SDCC1_BCR 12
-#define GCC_SDCC2_BCR 13
-#define GCC_SDCC3_BCR 14
-#define GCC_SDCC4_BCR 15
-#define GCC_BLSP1_BCR 16
-#define GCC_BLSP1_QUP1_BCR 17
-#define GCC_BLSP1_UART1_BCR 18
-#define GCC_BLSP1_QUP2_BCR 19
-#define GCC_BLSP1_UART2_BCR 20
-#define GCC_BLSP1_QUP3_BCR 21
-#define GCC_BLSP1_UART3_BCR 22
-#define GCC_BLSP1_QUP4_BCR 23
-#define GCC_BLSP1_UART4_BCR 24
-#define GCC_BLSP1_QUP5_BCR 25
-#define GCC_BLSP1_UART5_BCR 26
-#define GCC_BLSP1_QUP6_BCR 27
-#define GCC_BLSP1_UART6_BCR 28
-#define GCC_BLSP2_BCR 29
-#define GCC_BLSP2_QUP1_BCR 30
-#define GCC_BLSP2_UART1_BCR 31
-#define GCC_BLSP2_QUP2_BCR 32
-#define GCC_BLSP2_UART2_BCR 33
-#define GCC_BLSP2_QUP3_BCR 34
-#define GCC_BLSP2_UART3_BCR 35
-#define GCC_BLSP2_QUP4_BCR 36
-#define GCC_BLSP2_UART4_BCR 37
-#define GCC_BLSP2_QUP5_BCR 38
-#define GCC_BLSP2_UART5_BCR 39
-#define GCC_BLSP2_QUP6_BCR 40
-#define GCC_BLSP2_UART6_BCR 41
-#define GCC_PDM_BCR 42
-#define GCC_PRNG_BCR 43
-#define GCC_TSIF_BCR 44
-#define GCC_TCSR_BCR 45
-#define GCC_BOOT_ROM_BCR 46
-#define GCC_MSG_RAM_BCR 47
-#define GCC_TLMM_BCR 48
-#define GCC_MPM_BCR 49
-#define GCC_SEC_CTRL_BCR 50
-#define GCC_SPMI_BCR 51
-#define GCC_SPDM_BCR 52
-#define GCC_CE1_BCR 53
-#define GCC_BIMC_BCR 54
-#define GCC_SNOC_BUS_TIMEOUT0_BCR 55
-#define GCC_SNOC_BUS_TIMEOUT2_BCR 56
-#define GCC_SNOC_BUS_TIMEOUT1_BCR 57
-#define GCC_SNOC_BUS_TIMEOUT3_BCR 58
-#define GCC_SNOC_BUS_TIMEOUT_EXTREF_BCR 59
-#define GCC_PNOC_BUS_TIMEOUT0_BCR 60
-#define GCC_PNOC_BUS_TIMEOUT1_BCR 61
-#define GCC_PNOC_BUS_TIMEOUT2_BCR 62
-#define GCC_PNOC_BUS_TIMEOUT3_BCR 63
-#define GCC_PNOC_BUS_TIMEOUT4_BCR 64
-#define GCC_CNOC_BUS_TIMEOUT0_BCR 65
-#define GCC_CNOC_BUS_TIMEOUT1_BCR 66
-#define GCC_CNOC_BUS_TIMEOUT2_BCR 67
-#define GCC_CNOC_BUS_TIMEOUT3_BCR 68
-#define GCC_CNOC_BUS_TIMEOUT4_BCR 69
-#define GCC_CNOC_BUS_TIMEOUT5_BCR 70
-#define GCC_CNOC_BUS_TIMEOUT6_BCR 71
-#define GCC_CNOC_BUS_TIMEOUT7_BCR 72
-#define GCC_CNOC_BUS_TIMEOUT8_BCR 73
-#define GCC_CNOC_BUS_TIMEOUT9_BCR 74
-#define GCC_CNOC_BUS_TIMEOUT_EXTREF_BCR 75
-#define GCC_APB2JTAG_BCR 76
-#define GCC_RBCPR_CX_BCR 77
-#define GCC_RBCPR_MX_BCR 78
-#define GCC_PCIE_0_BCR 79
-#define GCC_PCIE_0_PHY_BCR 80
-#define GCC_PCIE_1_BCR 81
-#define GCC_PCIE_1_PHY_BCR 82
-#define GCC_PCIE_2_BCR 83
-#define GCC_PCIE_2_PHY_BCR 84
-#define GCC_PCIE_PHY_BCR 85
-#define GCC_DCD_BCR 86
-#define GCC_OBT_ODT_BCR 87
-#define GCC_UFS_BCR 88
-#define GCC_SSC_BCR 89
-#define GCC_VS_BCR 90
-#define GCC_AGGRE0_NOC_BCR 91
-#define GCC_AGGRE1_NOC_BCR 92
-#define GCC_AGGRE2_NOC_BCR 93
-#define GCC_DCC_BCR 94
-#define GCC_IPA_BCR 95
-#define GCC_QSPI_BCR 96
-#define GCC_SKL_BCR 97
-#define GCC_MSMPU_BCR 98
-#define GCC_MSS_Q6_BCR 99
-#define GCC_QREFS_VBG_CAL_BCR 100
-#define GCC_PCIE_PHY_COM_BCR 101
-#define GCC_PCIE_PHY_COM_NOCSR_BCR 102
-#define GCC_USB3_PHY_BCR 103
-#define GCC_USB3PHY_PHY_BCR 104
-#define GCC_MSS_RESTART 105
-
-/* Indexes for GDSCs */
-#define AGGRE0_NOC_GDSC 0
-#define HLOS1_VOTE_AGGRE0_NOC_GDSC 1
-#define HLOS1_VOTE_LPASS_ADSP_GDSC 2
-#define HLOS1_VOTE_LPASS_CORE_GDSC 3
-#define USB30_GDSC 4
-#define PCIE0_GDSC 5
-#define PCIE1_GDSC 6
-#define PCIE2_GDSC 7
-#define UFS_GDSC 8
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-qcs404.h b/include/dt-bindings/clock/qcom,gcc-qcs404.h
deleted file mode 100644
index bc30515..0000000
--- a/include/dt-bindings/clock/qcom,gcc-qcs404.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_QCOM_GCC_QCS404_H
-#define _DT_BINDINGS_CLK_QCOM_GCC_QCS404_H
-
-#define GCC_APSS_AHB_CLK_SRC 0
-#define GCC_BLSP1_QUP0_I2C_APPS_CLK_SRC 1
-#define GCC_BLSP1_QUP0_SPI_APPS_CLK_SRC 2
-#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC 3
-#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 4
-#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC 5
-#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 6
-#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC 7
-#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 8
-#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC 9
-#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC 10
-#define GCC_BLSP1_UART0_APPS_CLK_SRC 11
-#define GCC_BLSP1_UART1_APPS_CLK_SRC 12
-#define GCC_BLSP1_UART2_APPS_CLK_SRC 13
-#define GCC_BLSP1_UART3_APPS_CLK_SRC 14
-#define GCC_BLSP2_QUP0_I2C_APPS_CLK_SRC 15
-#define GCC_BLSP2_QUP0_SPI_APPS_CLK_SRC 16
-#define GCC_BLSP2_UART0_APPS_CLK_SRC 17
-#define GCC_BYTE0_CLK_SRC 18
-#define GCC_EMAC_CLK_SRC 19
-#define GCC_EMAC_PTP_CLK_SRC 20
-#define GCC_ESC0_CLK_SRC 21
-#define GCC_APSS_AHB_CLK 22
-#define GCC_APSS_AXI_CLK 23
-#define GCC_BIMC_APSS_AXI_CLK 24
-#define GCC_BIMC_GFX_CLK 25
-#define GCC_BIMC_MDSS_CLK 26
-#define GCC_BLSP1_AHB_CLK 27
-#define GCC_BLSP1_QUP0_I2C_APPS_CLK 28
-#define GCC_BLSP1_QUP0_SPI_APPS_CLK 29
-#define GCC_BLSP1_QUP1_I2C_APPS_CLK 30
-#define GCC_BLSP1_QUP1_SPI_APPS_CLK 31
-#define GCC_BLSP1_QUP2_I2C_APPS_CLK 32
-#define GCC_BLSP1_QUP2_SPI_APPS_CLK 33
-#define GCC_BLSP1_QUP3_I2C_APPS_CLK 34
-#define GCC_BLSP1_QUP3_SPI_APPS_CLK 35
-#define GCC_BLSP1_QUP4_I2C_APPS_CLK 36
-#define GCC_BLSP1_QUP4_SPI_APPS_CLK 37
-#define GCC_BLSP1_UART0_APPS_CLK 38
-#define GCC_BLSP1_UART1_APPS_CLK 39
-#define GCC_BLSP1_UART2_APPS_CLK 40
-#define GCC_BLSP1_UART3_APPS_CLK 41
-#define GCC_BLSP2_AHB_CLK 42
-#define GCC_BLSP2_QUP0_I2C_APPS_CLK 43
-#define GCC_BLSP2_QUP0_SPI_APPS_CLK 44
-#define GCC_BLSP2_UART0_APPS_CLK 45
-#define GCC_BOOT_ROM_AHB_CLK 46
-#define GCC_DCC_CLK 47
-#define GCC_GENI_IR_H_CLK 48
-#define GCC_ETH_AXI_CLK 49
-#define GCC_ETH_PTP_CLK 50
-#define GCC_ETH_RGMII_CLK 51
-#define GCC_ETH_SLAVE_AHB_CLK 52
-#define GCC_GENI_IR_S_CLK 53
-#define GCC_GP1_CLK 54
-#define GCC_GP2_CLK 55
-#define GCC_GP3_CLK 56
-#define GCC_MDSS_AHB_CLK 57
-#define GCC_MDSS_AXI_CLK 58
-#define GCC_MDSS_BYTE0_CLK 59
-#define GCC_MDSS_ESC0_CLK 60
-#define GCC_MDSS_HDMI_APP_CLK 61
-#define GCC_MDSS_HDMI_PCLK_CLK 62
-#define GCC_MDSS_MDP_CLK 63
-#define GCC_MDSS_PCLK0_CLK 64
-#define GCC_MDSS_VSYNC_CLK 65
-#define GCC_OXILI_AHB_CLK 66
-#define GCC_OXILI_GFX3D_CLK 67
-#define GCC_PCIE_0_AUX_CLK 68
-#define GCC_PCIE_0_CFG_AHB_CLK 69
-#define GCC_PCIE_0_MSTR_AXI_CLK 70
-#define GCC_PCIE_0_PIPE_CLK 71
-#define GCC_PCIE_0_SLV_AXI_CLK 72
-#define GCC_PCNOC_USB2_CLK 73
-#define GCC_PCNOC_USB3_CLK 74
-#define GCC_PDM2_CLK 75
-#define GCC_PDM_AHB_CLK 76
-#define GCC_VSYNC_CLK_SRC 77
-#define GCC_PRNG_AHB_CLK 78
-#define GCC_PWM0_XO512_CLK 79
-#define GCC_PWM1_XO512_CLK 80
-#define GCC_PWM2_XO512_CLK 81
-#define GCC_SDCC1_AHB_CLK 82
-#define GCC_SDCC1_APPS_CLK 83
-#define GCC_SDCC1_ICE_CORE_CLK 84
-#define GCC_SDCC2_AHB_CLK 85
-#define GCC_SDCC2_APPS_CLK 86
-#define GCC_SYS_NOC_USB3_CLK 87
-#define GCC_USB20_MOCK_UTMI_CLK 88
-#define GCC_USB2A_PHY_SLEEP_CLK 89
-#define GCC_USB30_MASTER_CLK 90
-#define GCC_USB30_MOCK_UTMI_CLK 91
-#define GCC_USB30_SLEEP_CLK 92
-#define GCC_USB3_PHY_AUX_CLK 93
-#define GCC_USB3_PHY_PIPE_CLK 94
-#define GCC_USB_HS_PHY_CFG_AHB_CLK 95
-#define GCC_USB_HS_SYSTEM_CLK 96
-#define GCC_GFX3D_CLK_SRC 97
-#define GCC_GP1_CLK_SRC 98
-#define GCC_GP2_CLK_SRC 99
-#define GCC_GP3_CLK_SRC 100
-#define GCC_GPLL0_OUT_MAIN 101
-#define GCC_GPLL1_OUT_MAIN 102
-#define GCC_GPLL3_OUT_MAIN 103
-#define GCC_GPLL4_OUT_MAIN 104
-#define GCC_HDMI_APP_CLK_SRC 105
-#define GCC_HDMI_PCLK_CLK_SRC 106
-#define GCC_MDP_CLK_SRC 107
-#define GCC_PCIE_0_AUX_CLK_SRC 108
-#define GCC_PCIE_0_PIPE_CLK_SRC 109
-#define GCC_PCLK0_CLK_SRC 110
-#define GCC_PDM2_CLK_SRC 111
-#define GCC_SDCC1_APPS_CLK_SRC 112
-#define GCC_SDCC1_ICE_CORE_CLK_SRC 113
-#define GCC_SDCC2_APPS_CLK_SRC 114
-#define GCC_USB20_MOCK_UTMI_CLK_SRC 115
-#define GCC_USB30_MASTER_CLK_SRC 116
-#define GCC_USB30_MOCK_UTMI_CLK_SRC 117
-#define GCC_USB3_PHY_AUX_CLK_SRC 118
-#define GCC_USB_HS_SYSTEM_CLK_SRC 119
-#define GCC_GPLL0_AO_CLK_SRC 120
-#define GCC_USB_HS_INACTIVITY_TIMERS_CLK 122
-#define GCC_GPLL0_AO_OUT_MAIN 123
-#define GCC_GPLL0_SLEEP_CLK_SRC 124
-#define GCC_GPLL6 125
-#define GCC_GPLL6_OUT_AUX 126
-#define GCC_MDSS_MDP_VOTE_CLK 127
-#define GCC_MDSS_ROTATOR_VOTE_CLK 128
-#define GCC_BIMC_GPU_CLK 129
-#define GCC_GTCU_AHB_CLK 130
-#define GCC_GFX_TCU_CLK 131
-#define GCC_GFX_TBU_CLK 132
-#define GCC_SMMU_CFG_CLK 133
-#define GCC_APSS_TCU_CLK 134
-#define GCC_CRYPTO_AHB_CLK 135
-#define GCC_CRYPTO_AXI_CLK 136
-#define GCC_CRYPTO_CLK 137
-#define GCC_MDP_TBU_CLK 138
-#define GCC_QDSS_DAP_CLK 139
-#define GCC_DCC_XO_CLK 140
-#define GCC_WCSS_Q6_AHB_CLK 141
-#define GCC_WCSS_Q6_AXIM_CLK 142
-#define GCC_CDSP_CFG_AHB_CLK 143
-#define GCC_BIMC_CDSP_CLK 144
-#define GCC_CDSP_TBU_CLK 145
-#define GCC_CDSP_BIMC_CLK_SRC 146
-
-#define GCC_GENI_IR_BCR 0
-#define GCC_USB_HS_BCR 1
-#define GCC_USB2_HS_PHY_ONLY_BCR 2
-#define GCC_QUSB2_PHY_BCR 3
-#define GCC_USB_HS_PHY_CFG_AHB_BCR 4
-#define GCC_USB2A_PHY_BCR 5
-#define GCC_USB3_PHY_BCR 6
-#define GCC_USB_30_BCR 7
-#define GCC_USB3PHY_PHY_BCR 8
-#define GCC_PCIE_0_BCR 9
-#define GCC_PCIE_0_PHY_BCR 10
-#define GCC_PCIE_0_LINK_DOWN_BCR 11
-#define GCC_PCIEPHY_0_PHY_BCR 12
-#define GCC_EMAC_BCR 13
-#define GCC_CDSP_RESTART 14
-#define GCC_PCIE_0_AXI_MASTER_STICKY_ARES 15
-#define GCC_PCIE_0_AHB_ARES 16
-#define GCC_PCIE_0_AXI_SLAVE_ARES 17
-#define GCC_PCIE_0_AXI_MASTER_ARES 18
-#define GCC_PCIE_0_CORE_STICKY_ARES 19
-#define GCC_PCIE_0_SLEEP_ARES 20
-#define GCC_PCIE_0_PIPE_ARES 21
-#define GCC_WDSP_RESTART 22
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-sdm845.h b/include/dt-bindings/clock/qcom,gcc-sdm845.h
deleted file mode 100644
index 968fa65..0000000
--- a/include/dt-bindings/clock/qcom,gcc-sdm845.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_GCC_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_GCC_SDM845_H
-
-/* GCC clock registers */
-#define GCC_AGGRE_NOC_PCIE_TBU_CLK 0
-#define GCC_AGGRE_UFS_CARD_AXI_CLK 1
-#define GCC_AGGRE_UFS_PHY_AXI_CLK 2
-#define GCC_AGGRE_USB3_PRIM_AXI_CLK 3
-#define GCC_AGGRE_USB3_SEC_AXI_CLK 4
-#define GCC_BOOT_ROM_AHB_CLK 5
-#define GCC_CAMERA_AHB_CLK 6
-#define GCC_CAMERA_AXI_CLK 7
-#define GCC_CAMERA_XO_CLK 8
-#define GCC_CE1_AHB_CLK 9
-#define GCC_CE1_AXI_CLK 10
-#define GCC_CE1_CLK 11
-#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 12
-#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 13
-#define GCC_CPUSS_AHB_CLK 14
-#define GCC_CPUSS_AHB_CLK_SRC 15
-#define GCC_CPUSS_RBCPR_CLK 16
-#define GCC_CPUSS_RBCPR_CLK_SRC 17
-#define GCC_DDRSS_GPU_AXI_CLK 18
-#define GCC_DISP_AHB_CLK 19
-#define GCC_DISP_AXI_CLK 20
-#define GCC_DISP_GPLL0_CLK_SRC 21
-#define GCC_DISP_GPLL0_DIV_CLK_SRC 22
-#define GCC_DISP_XO_CLK 23
-#define GCC_GP1_CLK 24
-#define GCC_GP1_CLK_SRC 25
-#define GCC_GP2_CLK 26
-#define GCC_GP2_CLK_SRC 27
-#define GCC_GP3_CLK 28
-#define GCC_GP3_CLK_SRC 29
-#define GCC_GPU_CFG_AHB_CLK 30
-#define GCC_GPU_GPLL0_CLK_SRC 31
-#define GCC_GPU_GPLL0_DIV_CLK_SRC 32
-#define GCC_GPU_MEMNOC_GFX_CLK 33
-#define GCC_GPU_SNOC_DVM_GFX_CLK 34
-#define GCC_MSS_AXIS2_CLK 35
-#define GCC_MSS_CFG_AHB_CLK 36
-#define GCC_MSS_GPLL0_DIV_CLK_SRC 37
-#define GCC_MSS_MFAB_AXIS_CLK 38
-#define GCC_MSS_Q6_MEMNOC_AXI_CLK 39
-#define GCC_MSS_SNOC_AXI_CLK 40
-#define GCC_PCIE_0_AUX_CLK 41
-#define GCC_PCIE_0_AUX_CLK_SRC 42
-#define GCC_PCIE_0_CFG_AHB_CLK 43
-#define GCC_PCIE_0_CLKREF_CLK 44
-#define GCC_PCIE_0_MSTR_AXI_CLK 45
-#define GCC_PCIE_0_PIPE_CLK 46
-#define GCC_PCIE_0_SLV_AXI_CLK 47
-#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 48
-#define GCC_PCIE_1_AUX_CLK 49
-#define GCC_PCIE_1_AUX_CLK_SRC 50
-#define GCC_PCIE_1_CFG_AHB_CLK 51
-#define GCC_PCIE_1_CLKREF_CLK 52
-#define GCC_PCIE_1_MSTR_AXI_CLK 53
-#define GCC_PCIE_1_PIPE_CLK 54
-#define GCC_PCIE_1_SLV_AXI_CLK 55
-#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 56
-#define GCC_PCIE_PHY_AUX_CLK 57
-#define GCC_PCIE_PHY_REFGEN_CLK 58
-#define GCC_PCIE_PHY_REFGEN_CLK_SRC 59
-#define GCC_PDM2_CLK 60
-#define GCC_PDM2_CLK_SRC 61
-#define GCC_PDM_AHB_CLK 62
-#define GCC_PDM_XO4_CLK 63
-#define GCC_PRNG_AHB_CLK 64
-#define GCC_QMIP_CAMERA_AHB_CLK 65
-#define GCC_QMIP_DISP_AHB_CLK 66
-#define GCC_QMIP_VIDEO_AHB_CLK 67
-#define GCC_QUPV3_WRAP0_S0_CLK 68
-#define GCC_QUPV3_WRAP0_S0_CLK_SRC 69
-#define GCC_QUPV3_WRAP0_S1_CLK 70
-#define GCC_QUPV3_WRAP0_S1_CLK_SRC 71
-#define GCC_QUPV3_WRAP0_S2_CLK 72
-#define GCC_QUPV3_WRAP0_S2_CLK_SRC 73
-#define GCC_QUPV3_WRAP0_S3_CLK 74
-#define GCC_QUPV3_WRAP0_S3_CLK_SRC 75
-#define GCC_QUPV3_WRAP0_S4_CLK 76
-#define GCC_QUPV3_WRAP0_S4_CLK_SRC 77
-#define GCC_QUPV3_WRAP0_S5_CLK 78
-#define GCC_QUPV3_WRAP0_S5_CLK_SRC 79
-#define GCC_QUPV3_WRAP0_S6_CLK 80
-#define GCC_QUPV3_WRAP0_S6_CLK_SRC 81
-#define GCC_QUPV3_WRAP0_S7_CLK 82
-#define GCC_QUPV3_WRAP0_S7_CLK_SRC 83
-#define GCC_QUPV3_WRAP1_S0_CLK 84
-#define GCC_QUPV3_WRAP1_S0_CLK_SRC 85
-#define GCC_QUPV3_WRAP1_S1_CLK 86
-#define GCC_QUPV3_WRAP1_S1_CLK_SRC 87
-#define GCC_QUPV3_WRAP1_S2_CLK 88
-#define GCC_QUPV3_WRAP1_S2_CLK_SRC 89
-#define GCC_QUPV3_WRAP1_S3_CLK 90
-#define GCC_QUPV3_WRAP1_S3_CLK_SRC 91
-#define GCC_QUPV3_WRAP1_S4_CLK 92
-#define GCC_QUPV3_WRAP1_S4_CLK_SRC 93
-#define GCC_QUPV3_WRAP1_S5_CLK 94
-#define GCC_QUPV3_WRAP1_S5_CLK_SRC 95
-#define GCC_QUPV3_WRAP1_S6_CLK 96
-#define GCC_QUPV3_WRAP1_S6_CLK_SRC 97
-#define GCC_QUPV3_WRAP1_S7_CLK 98
-#define GCC_QUPV3_WRAP1_S7_CLK_SRC 99
-#define GCC_QUPV3_WRAP_0_M_AHB_CLK 100
-#define GCC_QUPV3_WRAP_0_S_AHB_CLK 101
-#define GCC_QUPV3_WRAP_1_M_AHB_CLK 102
-#define GCC_QUPV3_WRAP_1_S_AHB_CLK 103
-#define GCC_SDCC2_AHB_CLK 104
-#define GCC_SDCC2_APPS_CLK 105
-#define GCC_SDCC2_APPS_CLK_SRC 106
-#define GCC_SDCC4_AHB_CLK 107
-#define GCC_SDCC4_APPS_CLK 108
-#define GCC_SDCC4_APPS_CLK_SRC 109
-#define GCC_SYS_NOC_CPUSS_AHB_CLK 110
-#define GCC_TSIF_AHB_CLK 111
-#define GCC_TSIF_INACTIVITY_TIMERS_CLK 112
-#define GCC_TSIF_REF_CLK 113
-#define GCC_TSIF_REF_CLK_SRC 114
-#define GCC_UFS_CARD_AHB_CLK 115
-#define GCC_UFS_CARD_AXI_CLK 116
-#define GCC_UFS_CARD_AXI_CLK_SRC 117
-#define GCC_UFS_CARD_CLKREF_CLK 118
-#define GCC_UFS_CARD_ICE_CORE_CLK 119
-#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 120
-#define GCC_UFS_CARD_PHY_AUX_CLK 121
-#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 122
-#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 123
-#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 124
-#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 125
-#define GCC_UFS_CARD_UNIPRO_CORE_CLK 126
-#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 127
-#define GCC_UFS_MEM_CLKREF_CLK 128
-#define GCC_UFS_PHY_AHB_CLK 129
-#define GCC_UFS_PHY_AXI_CLK 130
-#define GCC_UFS_PHY_AXI_CLK_SRC 131
-#define GCC_UFS_PHY_ICE_CORE_CLK 132
-#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 133
-#define GCC_UFS_PHY_PHY_AUX_CLK 134
-#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 135
-#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 136
-#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 137
-#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 138
-#define GCC_UFS_PHY_UNIPRO_CORE_CLK 139
-#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 140
-#define GCC_USB30_PRIM_MASTER_CLK 141
-#define GCC_USB30_PRIM_MASTER_CLK_SRC 142
-#define GCC_USB30_PRIM_MOCK_UTMI_CLK 143
-#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 144
-#define GCC_USB30_PRIM_SLEEP_CLK 145
-#define GCC_USB30_SEC_MASTER_CLK 146
-#define GCC_USB30_SEC_MASTER_CLK_SRC 147
-#define GCC_USB30_SEC_MOCK_UTMI_CLK 148
-#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 149
-#define GCC_USB30_SEC_SLEEP_CLK 150
-#define GCC_USB3_PRIM_CLKREF_CLK 151
-#define GCC_USB3_PRIM_PHY_AUX_CLK 152
-#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 153
-#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 154
-#define GCC_USB3_PRIM_PHY_PIPE_CLK 155
-#define GCC_USB3_SEC_CLKREF_CLK 156
-#define GCC_USB3_SEC_PHY_AUX_CLK 157
-#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 158
-#define GCC_USB3_SEC_PHY_PIPE_CLK 159
-#define GCC_USB3_SEC_PHY_COM_AUX_CLK 160
-#define GCC_USB_PHY_CFG_AHB2PHY_CLK 161
-#define GCC_VIDEO_AHB_CLK 162
-#define GCC_VIDEO_AXI_CLK 163
-#define GCC_VIDEO_XO_CLK 164
-#define GPLL0 165
-#define GPLL0_OUT_EVEN 166
-#define GPLL0_OUT_MAIN 167
-#define GCC_GPU_IREF_CLK 168
-#define GCC_SDCC1_AHB_CLK 169
-#define GCC_SDCC1_APPS_CLK 170
-#define GCC_SDCC1_ICE_CORE_CLK 171
-#define GCC_SDCC1_APPS_CLK_SRC 172
-#define GCC_SDCC1_ICE_CORE_CLK_SRC 173
-#define GCC_APC_VS_CLK 174
-#define GCC_GPU_VS_CLK 175
-#define GCC_MSS_VS_CLK 176
-#define GCC_VDDA_VS_CLK 177
-#define GCC_VDDCX_VS_CLK 178
-#define GCC_VDDMX_VS_CLK 179
-#define GCC_VS_CTRL_AHB_CLK 180
-#define GCC_VS_CTRL_CLK 181
-#define GCC_VS_CTRL_CLK_SRC 182
-#define GCC_VSENSOR_CLK_SRC 183
-#define GPLL4 184
-#define GCC_CPUSS_DVM_BUS_CLK 185
-#define GCC_CPUSS_GNOC_CLK 186
-#define GCC_QSPI_CORE_CLK_SRC 187
-#define GCC_QSPI_CORE_CLK 188
-#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 189
-#define GCC_LPASS_Q6_AXI_CLK 190
-#define GCC_LPASS_SWAY_CLK 191
-
-/* GCC Resets */
-#define GCC_MMSS_BCR 0
-#define GCC_PCIE_0_BCR 1
-#define GCC_PCIE_1_BCR 2
-#define GCC_PCIE_PHY_BCR 3
-#define GCC_PDM_BCR 4
-#define GCC_PRNG_BCR 5
-#define GCC_QUPV3_WRAPPER_0_BCR 6
-#define GCC_QUPV3_WRAPPER_1_BCR 7
-#define GCC_QUSB2PHY_PRIM_BCR 8
-#define GCC_QUSB2PHY_SEC_BCR 9
-#define GCC_SDCC2_BCR 10
-#define GCC_SDCC4_BCR 11
-#define GCC_TSIF_BCR 12
-#define GCC_UFS_CARD_BCR 13
-#define GCC_UFS_PHY_BCR 14
-#define GCC_USB30_PRIM_BCR 15
-#define GCC_USB30_SEC_BCR 16
-#define GCC_USB3_PHY_PRIM_BCR 17
-#define GCC_USB3PHY_PHY_PRIM_BCR 18
-#define GCC_USB3_DP_PHY_PRIM_BCR 19
-#define GCC_USB3_PHY_SEC_BCR 20
-#define GCC_USB3PHY_PHY_SEC_BCR 21
-#define GCC_USB3_DP_PHY_SEC_BCR 22
-#define GCC_USB_PHY_CFG_AHB2PHY_BCR 23
-#define GCC_PCIE_0_PHY_BCR 24
-#define GCC_PCIE_1_PHY_BCR 25
-
-/* GCC GDSCRs */
-#define PCIE_0_GDSC 0
-#define PCIE_1_GDSC 1
-#define UFS_CARD_GDSC 2
-#define UFS_PHY_GDSC 3
-#define USB30_PRIM_GDSC 4
-#define USB30_SEC_GDSC 5
-#define HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC 6
-#define HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC 7
-#define HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC 8
-#define HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC 9
-#define HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC 10
-#define HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC 11
-#define HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC 12
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,gpucc-sdm845.h b/include/dt-bindings/clock/qcom,gpucc-sdm845.h
deleted file mode 100644
index 9690d90..0000000
--- a/include/dt-bindings/clock/qcom,gpucc-sdm845.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_GPU_CC_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_GPU_CC_SDM845_H
-
-/* GPU_CC clock registers */
-#define GPU_CC_CX_GMU_CLK 0
-#define GPU_CC_CXO_CLK 1
-#define GPU_CC_GMU_CLK_SRC 2
-#define GPU_CC_PLL1 3
-
-/* GPU_CC Resets */
-#define GPUCC_GPU_CC_CX_BCR 0
-#define GPUCC_GPU_CC_GMU_BCR 1
-#define GPUCC_GPU_CC_XO_BCR 2
-
-/* GPU_CC GDSCRs */
-#define GPU_CX_GDSC 0
-#define GPU_GX_GDSC 1
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,lpass-sdm845.h b/include/dt-bindings/clock/qcom,lpass-sdm845.h
deleted file mode 100644
index 6590508..0000000
--- a/include/dt-bindings/clock/qcom,lpass-sdm845.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
-
-#define LPASS_Q6SS_AHBM_AON_CLK 0
-#define LPASS_Q6SS_AHBS_AON_CLK 1
-#define LPASS_QDSP6SS_XO_CLK 2
-#define LPASS_QDSP6SS_SLEEP_CLK 3
-#define LPASS_QDSP6SS_CORE_CLK 4
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,mmcc-msm8996.h b/include/dt-bindings/clock/qcom,mmcc-msm8996.h
deleted file mode 100644
index d51f9ac..0000000
--- a/include/dt-bindings/clock/qcom,mmcc-msm8996.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_MSM_MMCC_8996_H
-#define _DT_BINDINGS_CLK_MSM_MMCC_8996_H
-
-#define MMPLL0_EARLY 0
-#define MMPLL0_PLL 1
-#define MMPLL1_EARLY 2
-#define MMPLL1_PLL 3
-#define MMPLL2_EARLY 4
-#define MMPLL2_PLL 5
-#define MMPLL3_EARLY 6
-#define MMPLL3_PLL 7
-#define MMPLL4_EARLY 8
-#define MMPLL4_PLL 9
-#define MMPLL5_EARLY 10
-#define MMPLL5_PLL 11
-#define MMPLL8_EARLY 12
-#define MMPLL8_PLL 13
-#define MMPLL9_EARLY 14
-#define MMPLL9_PLL 15
-#define AHB_CLK_SRC 16
-#define AXI_CLK_SRC 17
-#define MAXI_CLK_SRC 18
-#define DSA_CORE_CLK_SRC 19
-#define GFX3D_CLK_SRC 20
-#define RBBMTIMER_CLK_SRC 21
-#define ISENSE_CLK_SRC 22
-#define RBCPR_CLK_SRC 23
-#define VIDEO_CORE_CLK_SRC 24
-#define VIDEO_SUBCORE0_CLK_SRC 25
-#define VIDEO_SUBCORE1_CLK_SRC 26
-#define PCLK0_CLK_SRC 27
-#define PCLK1_CLK_SRC 28
-#define MDP_CLK_SRC 29
-#define EXTPCLK_CLK_SRC 30
-#define VSYNC_CLK_SRC 31
-#define HDMI_CLK_SRC 32
-#define BYTE0_CLK_SRC 33
-#define BYTE1_CLK_SRC 34
-#define ESC0_CLK_SRC 35
-#define ESC1_CLK_SRC 36
-#define CAMSS_GP0_CLK_SRC 37
-#define CAMSS_GP1_CLK_SRC 38
-#define MCLK0_CLK_SRC 39
-#define MCLK1_CLK_SRC 40
-#define MCLK2_CLK_SRC 41
-#define MCLK3_CLK_SRC 42
-#define CCI_CLK_SRC 43
-#define CSI0PHYTIMER_CLK_SRC 44
-#define CSI1PHYTIMER_CLK_SRC 45
-#define CSI2PHYTIMER_CLK_SRC 46
-#define CSIPHY0_3P_CLK_SRC 47
-#define CSIPHY1_3P_CLK_SRC 48
-#define CSIPHY2_3P_CLK_SRC 49
-#define JPEG0_CLK_SRC 50
-#define JPEG2_CLK_SRC 51
-#define JPEG_DMA_CLK_SRC 52
-#define VFE0_CLK_SRC 53
-#define VFE1_CLK_SRC 54
-#define CPP_CLK_SRC 55
-#define CSI0_CLK_SRC 56
-#define CSI1_CLK_SRC 57
-#define CSI2_CLK_SRC 58
-#define CSI3_CLK_SRC 59
-#define FD_CORE_CLK_SRC 60
-#define MMSS_CXO_CLK 61
-#define MMSS_SLEEPCLK_CLK 62
-#define MMSS_MMAGIC_AHB_CLK 63
-#define MMSS_MMAGIC_CFG_AHB_CLK 64
-#define MMSS_MISC_AHB_CLK 65
-#define MMSS_MISC_CXO_CLK 66
-#define MMSS_BTO_AHB_CLK 67
-#define MMSS_MMAGIC_AXI_CLK 68
-#define MMSS_S0_AXI_CLK 69
-#define MMSS_MMAGIC_MAXI_CLK 70
-#define DSA_CORE_CLK 71
-#define DSA_NOC_CFG_AHB_CLK 72
-#define MMAGIC_CAMSS_AXI_CLK 73
-#define MMAGIC_CAMSS_NOC_CFG_AHB_CLK 74
-#define THROTTLE_CAMSS_CXO_CLK 75
-#define THROTTLE_CAMSS_AHB_CLK 76
-#define THROTTLE_CAMSS_AXI_CLK 77
-#define SMMU_VFE_AHB_CLK 78
-#define SMMU_VFE_AXI_CLK 79
-#define SMMU_CPP_AHB_CLK 80
-#define SMMU_CPP_AXI_CLK 81
-#define SMMU_JPEG_AHB_CLK 82
-#define SMMU_JPEG_AXI_CLK 83
-#define MMAGIC_MDSS_AXI_CLK 84
-#define MMAGIC_MDSS_NOC_CFG_AHB_CLK 85
-#define THROTTLE_MDSS_CXO_CLK 86
-#define THROTTLE_MDSS_AHB_CLK 87
-#define THROTTLE_MDSS_AXI_CLK 88
-#define SMMU_ROT_AHB_CLK 89
-#define SMMU_ROT_AXI_CLK 90
-#define SMMU_MDP_AHB_CLK 91
-#define SMMU_MDP_AXI_CLK 92
-#define MMAGIC_VIDEO_AXI_CLK 93
-#define MMAGIC_VIDEO_NOC_CFG_AHB_CLK 94
-#define THROTTLE_VIDEO_CXO_CLK 95
-#define THROTTLE_VIDEO_AHB_CLK 96
-#define THROTTLE_VIDEO_AXI_CLK 97
-#define SMMU_VIDEO_AHB_CLK 98
-#define SMMU_VIDEO_AXI_CLK 99
-#define MMAGIC_BIMC_AXI_CLK 100
-#define MMAGIC_BIMC_NOC_CFG_AHB_CLK 101
-#define GPU_GX_GFX3D_CLK 102
-#define GPU_GX_RBBMTIMER_CLK 103
-#define GPU_AHB_CLK 104
-#define GPU_AON_ISENSE_CLK 105
-#define VMEM_MAXI_CLK 106
-#define VMEM_AHB_CLK 107
-#define MMSS_RBCPR_CLK 108
-#define MMSS_RBCPR_AHB_CLK 109
-#define VIDEO_CORE_CLK 110
-#define VIDEO_AXI_CLK 111
-#define VIDEO_MAXI_CLK 112
-#define VIDEO_AHB_CLK 113
-#define VIDEO_SUBCORE0_CLK 114
-#define VIDEO_SUBCORE1_CLK 115
-#define MDSS_AHB_CLK 116
-#define MDSS_HDMI_AHB_CLK 117
-#define MDSS_AXI_CLK 118
-#define MDSS_PCLK0_CLK 119
-#define MDSS_PCLK1_CLK 120
-#define MDSS_MDP_CLK 121
-#define MDSS_EXTPCLK_CLK 122
-#define MDSS_VSYNC_CLK 123
-#define MDSS_HDMI_CLK 124
-#define MDSS_BYTE0_CLK 125
-#define MDSS_BYTE1_CLK 126
-#define MDSS_ESC0_CLK 127
-#define MDSS_ESC1_CLK 128
-#define CAMSS_TOP_AHB_CLK 129
-#define CAMSS_AHB_CLK 130
-#define CAMSS_MICRO_AHB_CLK 131
-#define CAMSS_GP0_CLK 132
-#define CAMSS_GP1_CLK 133
-#define CAMSS_MCLK0_CLK 134
-#define CAMSS_MCLK1_CLK 135
-#define CAMSS_MCLK2_CLK 136
-#define CAMSS_MCLK3_CLK 137
-#define CAMSS_CCI_CLK 138
-#define CAMSS_CCI_AHB_CLK 139
-#define CAMSS_CSI0PHYTIMER_CLK 140
-#define CAMSS_CSI1PHYTIMER_CLK 141
-#define CAMSS_CSI2PHYTIMER_CLK 142
-#define CAMSS_CSIPHY0_3P_CLK 143
-#define CAMSS_CSIPHY1_3P_CLK 144
-#define CAMSS_CSIPHY2_3P_CLK 145
-#define CAMSS_JPEG0_CLK 146
-#define CAMSS_JPEG2_CLK 147
-#define CAMSS_JPEG_DMA_CLK 148
-#define CAMSS_JPEG_AHB_CLK 149
-#define CAMSS_JPEG_AXI_CLK 150
-#define CAMSS_VFE_AHB_CLK 151
-#define CAMSS_VFE_AXI_CLK 152
-#define CAMSS_VFE0_CLK 153
-#define CAMSS_VFE0_STREAM_CLK 154
-#define CAMSS_VFE0_AHB_CLK 155
-#define CAMSS_VFE1_CLK 156
-#define CAMSS_VFE1_STREAM_CLK 157
-#define CAMSS_VFE1_AHB_CLK 158
-#define CAMSS_CSI_VFE0_CLK 159
-#define CAMSS_CSI_VFE1_CLK 160
-#define CAMSS_CPP_VBIF_AHB_CLK 161
-#define CAMSS_CPP_AXI_CLK 162
-#define CAMSS_CPP_CLK 163
-#define CAMSS_CPP_AHB_CLK 164
-#define CAMSS_CSI0_CLK 165
-#define CAMSS_CSI0_AHB_CLK 166
-#define CAMSS_CSI0PHY_CLK 167
-#define CAMSS_CSI0RDI_CLK 168
-#define CAMSS_CSI0PIX_CLK 169
-#define CAMSS_CSI1_CLK 170
-#define CAMSS_CSI1_AHB_CLK 171
-#define CAMSS_CSI1PHY_CLK 172
-#define CAMSS_CSI1RDI_CLK 173
-#define CAMSS_CSI1PIX_CLK 174
-#define CAMSS_CSI2_CLK 175
-#define CAMSS_CSI2_AHB_CLK 176
-#define CAMSS_CSI2PHY_CLK 177
-#define CAMSS_CSI2RDI_CLK 178
-#define CAMSS_CSI2PIX_CLK 179
-#define CAMSS_CSI3_CLK 180
-#define CAMSS_CSI3_AHB_CLK 181
-#define CAMSS_CSI3PHY_CLK 182
-#define CAMSS_CSI3RDI_CLK 183
-#define CAMSS_CSI3PIX_CLK 184
-#define CAMSS_ISPIF_AHB_CLK 185
-#define FD_CORE_CLK 186
-#define FD_CORE_UAR_CLK 187
-#define FD_AHB_CLK 188
-#define MMSS_SPDM_CSI0_CLK 189
-#define MMSS_SPDM_JPEG_DMA_CLK 190
-#define MMSS_SPDM_CPP_CLK 191
-#define MMSS_SPDM_PCLK0_CLK 192
-#define MMSS_SPDM_AHB_CLK 193
-#define MMSS_SPDM_GFX3D_CLK 194
-#define MMSS_SPDM_PCLK1_CLK 195
-#define MMSS_SPDM_JPEG2_CLK 196
-#define MMSS_SPDM_DEBUG_CLK 197
-#define MMSS_SPDM_VFE1_CLK 198
-#define MMSS_SPDM_VFE0_CLK 199
-#define MMSS_SPDM_VIDEO_CORE_CLK 200
-#define MMSS_SPDM_AXI_CLK 201
-#define MMSS_SPDM_MDP_CLK 202
-#define MMSS_SPDM_JPEG0_CLK 203
-#define MMSS_SPDM_RM_AXI_CLK 204
-#define MMSS_SPDM_RM_MAXI_CLK 205
-
-#define MMAGICAHB_BCR 0
-#define MMAGIC_CFG_BCR 1
-#define MISC_BCR 2
-#define BTO_BCR 3
-#define MMAGICAXI_BCR 4
-#define MMAGICMAXI_BCR 5
-#define DSA_BCR 6
-#define MMAGIC_CAMSS_BCR 7
-#define THROTTLE_CAMSS_BCR 8
-#define SMMU_VFE_BCR 9
-#define SMMU_CPP_BCR 10
-#define SMMU_JPEG_BCR 11
-#define MMAGIC_MDSS_BCR 12
-#define THROTTLE_MDSS_BCR 13
-#define SMMU_ROT_BCR 14
-#define SMMU_MDP_BCR 15
-#define MMAGIC_VIDEO_BCR 16
-#define THROTTLE_VIDEO_BCR 17
-#define SMMU_VIDEO_BCR 18
-#define MMAGIC_BIMC_BCR 19
-#define GPU_GX_BCR 20
-#define GPU_BCR 21
-#define GPU_AON_BCR 22
-#define VMEM_BCR 23
-#define MMSS_RBCPR_BCR 24
-#define VIDEO_BCR 25
-#define MDSS_BCR 26
-#define CAMSS_TOP_BCR 27
-#define CAMSS_AHB_BCR 28
-#define CAMSS_MICRO_BCR 29
-#define CAMSS_CCI_BCR 30
-#define CAMSS_PHY0_BCR 31
-#define CAMSS_PHY1_BCR 32
-#define CAMSS_PHY2_BCR 33
-#define CAMSS_CSIPHY0_3P_BCR 34
-#define CAMSS_CSIPHY1_3P_BCR 35
-#define CAMSS_CSIPHY2_3P_BCR 36
-#define CAMSS_JPEG_BCR 37
-#define CAMSS_VFE_BCR 38
-#define CAMSS_VFE0_BCR 39
-#define CAMSS_VFE1_BCR 40
-#define CAMSS_CSI_VFE0_BCR 41
-#define CAMSS_CSI_VFE1_BCR 42
-#define CAMSS_CPP_TOP_BCR 43
-#define CAMSS_CPP_BCR 44
-#define CAMSS_CSI0_BCR 45
-#define CAMSS_CSI0RDI_BCR 46
-#define CAMSS_CSI0PIX_BCR 47
-#define CAMSS_CSI1_BCR 48
-#define CAMSS_CSI1RDI_BCR 49
-#define CAMSS_CSI1PIX_BCR 50
-#define CAMSS_CSI2_BCR 51
-#define CAMSS_CSI2RDI_BCR 52
-#define CAMSS_CSI2PIX_BCR 53
-#define CAMSS_CSI3_BCR 54
-#define CAMSS_CSI3RDI_BCR 55
-#define CAMSS_CSI3PIX_BCR 56
-#define CAMSS_ISPIF_BCR 57
-#define FD_BCR 58
-#define MMSS_SPDM_RM_BCR 59
-
-/* Indexes for GDSCs */
-#define MMAGIC_VIDEO_GDSC 0
-#define MMAGIC_MDSS_GDSC 1
-#define MMAGIC_CAMSS_GDSC 2
-#define GPU_GDSC 3
-#define VENUS_GDSC 4
-#define VENUS_CORE0_GDSC 5
-#define VENUS_CORE1_GDSC 6
-#define CAMSS_GDSC 7
-#define VFE0_GDSC 8
-#define VFE1_GDSC 9
-#define JPEG_GDSC 10
-#define CPP_GDSC 11
-#define FD_GDSC 12
-#define MDSS_GDSC 13
-#define GPU_GX_GDSC 14
-#define MMAGIC_BIMC_GDSC 15
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
deleted file mode 100644
index 46309c9..0000000
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2015 Linaro Limited
- */
-
-#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
-#define _DT_BINDINGS_CLK_MSM_RPMCC_H
-
-/* RPM clocks */
-#define RPM_PXO_CLK 0
-#define RPM_PXO_A_CLK 1
-#define RPM_CXO_CLK 2
-#define RPM_CXO_A_CLK 3
-#define RPM_APPS_FABRIC_CLK 4
-#define RPM_APPS_FABRIC_A_CLK 5
-#define RPM_CFPB_CLK 6
-#define RPM_CFPB_A_CLK 7
-#define RPM_QDSS_CLK 8
-#define RPM_QDSS_A_CLK 9
-#define RPM_DAYTONA_FABRIC_CLK 10
-#define RPM_DAYTONA_FABRIC_A_CLK 11
-#define RPM_EBI1_CLK 12
-#define RPM_EBI1_A_CLK 13
-#define RPM_MM_FABRIC_CLK 14
-#define RPM_MM_FABRIC_A_CLK 15
-#define RPM_MMFPB_CLK 16
-#define RPM_MMFPB_A_CLK 17
-#define RPM_SYS_FABRIC_CLK 18
-#define RPM_SYS_FABRIC_A_CLK 19
-#define RPM_SFPB_CLK 20
-#define RPM_SFPB_A_CLK 21
-#define RPM_SMI_CLK 22
-#define RPM_SMI_A_CLK 23
-#define RPM_PLL4_CLK 24
-#define RPM_XO_D0 25
-#define RPM_XO_D1 26
-#define RPM_XO_A0 27
-#define RPM_XO_A1 28
-#define RPM_XO_A2 29
-#define RPM_NSS_FABRIC_0_CLK 30
-#define RPM_NSS_FABRIC_0_A_CLK 31
-#define RPM_NSS_FABRIC_1_CLK 32
-#define RPM_NSS_FABRIC_1_A_CLK 33
-
-/* SMD RPM clocks */
-#define RPM_SMD_XO_CLK_SRC 0
-#define RPM_SMD_XO_A_CLK_SRC 1
-#define RPM_SMD_PCNOC_CLK 2
-#define RPM_SMD_PCNOC_A_CLK 3
-#define RPM_SMD_SNOC_CLK 4
-#define RPM_SMD_SNOC_A_CLK 5
-#define RPM_SMD_BIMC_CLK 6
-#define RPM_SMD_BIMC_A_CLK 7
-#define RPM_SMD_QDSS_CLK 8
-#define RPM_SMD_QDSS_A_CLK 9
-#define RPM_SMD_BB_CLK1 10
-#define RPM_SMD_BB_CLK1_A 11
-#define RPM_SMD_BB_CLK2 12
-#define RPM_SMD_BB_CLK2_A 13
-#define RPM_SMD_RF_CLK1 14
-#define RPM_SMD_RF_CLK1_A 15
-#define RPM_SMD_RF_CLK2 16
-#define RPM_SMD_RF_CLK2_A 17
-#define RPM_SMD_BB_CLK1_PIN 18
-#define RPM_SMD_BB_CLK1_A_PIN 19
-#define RPM_SMD_BB_CLK2_PIN 20
-#define RPM_SMD_BB_CLK2_A_PIN 21
-#define RPM_SMD_RF_CLK1_PIN 22
-#define RPM_SMD_RF_CLK1_A_PIN 23
-#define RPM_SMD_RF_CLK2_PIN 24
-#define RPM_SMD_RF_CLK2_A_PIN 25
-#define RPM_SMD_PNOC_CLK 26
-#define RPM_SMD_PNOC_A_CLK 27
-#define RPM_SMD_CNOC_CLK 28
-#define RPM_SMD_CNOC_A_CLK 29
-#define RPM_SMD_MMSSNOC_AHB_CLK 30
-#define RPM_SMD_MMSSNOC_AHB_A_CLK 31
-#define RPM_SMD_GFX3D_CLK_SRC 32
-#define RPM_SMD_GFX3D_A_CLK_SRC 33
-#define RPM_SMD_OCMEMGX_CLK 34
-#define RPM_SMD_OCMEMGX_A_CLK 35
-#define RPM_SMD_CXO_D0 36
-#define RPM_SMD_CXO_D0_A 37
-#define RPM_SMD_CXO_D1 38
-#define RPM_SMD_CXO_D1_A 39
-#define RPM_SMD_CXO_A0 40
-#define RPM_SMD_CXO_A0_A 41
-#define RPM_SMD_CXO_A1 42
-#define RPM_SMD_CXO_A1_A 43
-#define RPM_SMD_CXO_A2 44
-#define RPM_SMD_CXO_A2_A 45
-#define RPM_SMD_DIV_CLK1 46
-#define RPM_SMD_DIV_A_CLK1 47
-#define RPM_SMD_DIV_CLK2 48
-#define RPM_SMD_DIV_A_CLK2 49
-#define RPM_SMD_DIFF_CLK 50
-#define RPM_SMD_DIFF_A_CLK 51
-#define RPM_SMD_CXO_D0_PIN 52
-#define RPM_SMD_CXO_D0_A_PIN 53
-#define RPM_SMD_CXO_D1_PIN 54
-#define RPM_SMD_CXO_D1_A_PIN 55
-#define RPM_SMD_CXO_A0_PIN 56
-#define RPM_SMD_CXO_A0_A_PIN 57
-#define RPM_SMD_CXO_A1_PIN 58
-#define RPM_SMD_CXO_A1_A_PIN 59
-#define RPM_SMD_CXO_A2_PIN 60
-#define RPM_SMD_CXO_A2_A_PIN 61
-#define RPM_SMD_AGGR1_NOC_CLK 62
-#define RPM_SMD_AGGR1_NOC_A_CLK 63
-#define RPM_SMD_AGGR2_NOC_CLK 64
-#define RPM_SMD_AGGR2_NOC_A_CLK 65
-#define RPM_SMD_MMAXI_CLK 66
-#define RPM_SMD_MMAXI_A_CLK 67
-#define RPM_SMD_IPA_CLK 68
-#define RPM_SMD_IPA_A_CLK 69
-#define RPM_SMD_CE1_CLK 70
-#define RPM_SMD_CE1_A_CLK 71
-#define RPM_SMD_DIV_CLK3 72
-#define RPM_SMD_DIV_A_CLK3 73
-#define RPM_SMD_LN_BB_CLK 74
-#define RPM_SMD_LN_BB_A_CLK 75
-#define RPM_SMD_BIMC_GPU_CLK 76
-#define RPM_SMD_BIMC_GPU_A_CLK 77
-#define RPM_SMD_QPIC_CLK 78
-#define RPM_SMD_QPIC_CLK_A 79
-#define RPM_SMD_LN_BB_CLK1 80
-#define RPM_SMD_LN_BB_CLK1_A 81
-#define RPM_SMD_LN_BB_CLK2 82
-#define RPM_SMD_LN_BB_CLK2_A 83
-#define RPM_SMD_LN_BB_CLK3_PIN 84
-#define RPM_SMD_LN_BB_CLK3_A_PIN 85
-#define RPM_SMD_RF_CLK3 86
-#define RPM_SMD_RF_CLK3_A 87
-#define RPM_SMD_RF_CLK3_PIN 88
-#define RPM_SMD_RF_CLK3_A_PIN 89
-#define RPM_SMD_MMSSNOC_AXI_CLK 90
-#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
-#define RPM_SMD_CNOC_PERIPH_CLK 92
-#define RPM_SMD_CNOC_PERIPH_A_CLK 93
-#define RPM_SMD_LN_BB_CLK3 94
-#define RPM_SMD_LN_BB_CLK3_A 95
-#define RPM_SMD_LN_BB_CLK1_PIN 96
-#define RPM_SMD_LN_BB_CLK1_A_PIN 97
-#define RPM_SMD_LN_BB_CLK2_PIN 98
-#define RPM_SMD_LN_BB_CLK2_A_PIN 99
-#define RPM_SMD_SYSMMNOC_CLK 100
-#define RPM_SMD_SYSMMNOC_A_CLK 101
-#define RPM_SMD_CE2_CLK 102
-#define RPM_SMD_CE2_A_CLK 103
-#define RPM_SMD_CE3_CLK 104
-#define RPM_SMD_CE3_A_CLK 105
-#define RPM_SMD_QUP_CLK 106
-#define RPM_SMD_QUP_A_CLK 107
-#define RPM_SMD_MMRT_CLK 108
-#define RPM_SMD_MMRT_A_CLK 109
-#define RPM_SMD_MMNRT_CLK 110
-#define RPM_SMD_MMNRT_A_CLK 111
-#define RPM_SMD_SNOC_PERIPH_CLK 112
-#define RPM_SMD_SNOC_PERIPH_A_CLK 113
-#define RPM_SMD_SNOC_LPASS_CLK 114
-#define RPM_SMD_SNOC_LPASS_A_CLK 115
-#define RPM_SMD_HWKM_CLK 116
-#define RPM_SMD_HWKM_A_CLK 117
-#define RPM_SMD_PKA_CLK 118
-#define RPM_SMD_PKA_A_CLK 119
-#define RPM_SMD_CPUSS_GNOC_CLK 120
-#define RPM_SMD_CPUSS_GNOC_A_CLK 121
-#define RPM_SMD_MSS_CFG_AHB_CLK 122
-#define RPM_SMD_MSS_CFG_AHB_A_CLK 123
-#define RPM_SMD_BIMC_FREQ_LOG 124
-#define RPM_SMD_LN_BB_CLK_PIN 125
-#define RPM_SMD_LN_BB_A_CLK_PIN 126
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h
deleted file mode 100644
index bf5b59b..0000000
--- a/include/dt-bindings/clock/qcom,rpmh.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */
-
-#ifndef _DT_BINDINGS_CLK_MSM_RPMH_H
-#define _DT_BINDINGS_CLK_MSM_RPMH_H
-
-/* RPMh controlled clocks */
-#define RPMH_CXO_CLK 0
-#define RPMH_CXO_CLK_A 1
-#define RPMH_LN_BB_CLK2 2
-#define RPMH_LN_BB_CLK2_A 3
-#define RPMH_LN_BB_CLK3 4
-#define RPMH_LN_BB_CLK3_A 5
-#define RPMH_RF_CLK1 6
-#define RPMH_RF_CLK1_A 7
-#define RPMH_RF_CLK2 8
-#define RPMH_RF_CLK2_A 9
-#define RPMH_RF_CLK3 10
-#define RPMH_RF_CLK3_A 11
-#define RPMH_IPA_CLK 12
-#define RPMH_LN_BB_CLK1 13
-#define RPMH_LN_BB_CLK1_A 14
-#define RPMH_CE_CLK 15
-#define RPMH_QPIC_CLK 16
-#define RPMH_DIV_CLK1 17
-#define RPMH_DIV_CLK1_A 18
-#define RPMH_RF_CLK4 19
-#define RPMH_RF_CLK4_A 20
-#define RPMH_RF_CLK5 21
-#define RPMH_RF_CLK5_A 22
-#define RPMH_PKA_CLK 23
-#define RPMH_HWKM_CLK 24
-#define RPMH_QLINK_CLK 25
-#define RPMH_QLINK_CLK_A 26
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,turingcc-qcs404.h b/include/dt-bindings/clock/qcom,turingcc-qcs404.h
deleted file mode 100644
index 838faef..0000000
--- a/include/dt-bindings/clock/qcom,turingcc-qcs404.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2019, Linaro Ltd
- */
-
-#ifndef _DT_BINDINGS_CLK_TURING_QCS404_H
-#define _DT_BINDINGS_CLK_TURING_QCS404_H
-
-#define TURING_Q6SS_Q6_AXIM_CLK 0
-#define TURING_Q6SS_AHBM_AON_CLK 1
-#define TURING_WRAPPER_AON_CLK 2
-#define TURING_Q6SS_AHBS_AON_CLK 3
-#define TURING_WRAPPER_QOS_AHBS_AON_CLK 4
-
-#endif
diff --git a/include/dt-bindings/clock/qcom,videocc-sdm845.h b/include/dt-bindings/clock/qcom,videocc-sdm845.h
deleted file mode 100644
index 1b86816..0000000
--- a/include/dt-bindings/clock/qcom,videocc-sdm845.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_CLK_SDM_VIDEO_CC_SDM845_H
-#define _DT_BINDINGS_CLK_SDM_VIDEO_CC_SDM845_H
-
-/* VIDEO_CC clock registers */
-#define VIDEO_CC_APB_CLK 0
-#define VIDEO_CC_AT_CLK 1
-#define VIDEO_CC_QDSS_TRIG_CLK 2
-#define VIDEO_CC_QDSS_TSCTR_DIV8_CLK 3
-#define VIDEO_CC_VCODEC0_AXI_CLK 4
-#define VIDEO_CC_VCODEC0_CORE_CLK 5
-#define VIDEO_CC_VCODEC1_AXI_CLK 6
-#define VIDEO_CC_VCODEC1_CORE_CLK 7
-#define VIDEO_CC_VENUS_AHB_CLK 8
-#define VIDEO_CC_VENUS_CLK_SRC 9
-#define VIDEO_CC_VENUS_CTL_AXI_CLK 10
-#define VIDEO_CC_VENUS_CTL_CORE_CLK 11
-#define VIDEO_PLL0 12
-
-/* VIDEO_CC Resets */
-#define VIDEO_CC_VENUS_BCR 0
-#define VIDEO_CC_VCODEC0_BCR 1
-#define VIDEO_CC_VCODEC1_BCR 2
-#define VIDEO_CC_INTERFACE_BCR 3
-
-/* VIDEO_CC GDSCRs */
-#define VENUS_GDSC 0
-#define VCODEC0_GDSC 1
-#define VCODEC1_GDSC 2
-
-#endif
diff --git a/include/dt-bindings/dma/qcom-gpi.h b/include/dt-bindings/dma/qcom-gpi.h
deleted file mode 100644
index ebda2a3..0000000
--- a/include/dt-bindings/dma/qcom-gpi.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
-/* Copyright (c) 2020, Linaro Ltd. */
-
-#ifndef __DT_BINDINGS_DMA_QCOM_GPI_H__
-#define __DT_BINDINGS_DMA_QCOM_GPI_H__
-
-#define QCOM_GPI_SPI 1
-#define QCOM_GPI_UART 2
-#define QCOM_GPI_I2C 3
-
-#endif /* __DT_BINDINGS_DMA_QCOM_GPI_H__ */
diff --git a/include/dt-bindings/firmware/qcom,scm.h b/include/dt-bindings/firmware/qcom,scm.h
deleted file mode 100644
index 6de8b08..0000000
--- a/include/dt-bindings/firmware/qcom,scm.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-/*
- * Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved.
- * Copyright (C) 2015 Linaro Ltd.
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_FIRMWARE_QCOM_SCM_H
-#define _DT_BINDINGS_FIRMWARE_QCOM_SCM_H
-
-#define QCOM_SCM_VMID_TZ 0x1
-#define QCOM_SCM_VMID_HLOS 0x3
-#define QCOM_SCM_VMID_SSC_Q6 0x5
-#define QCOM_SCM_VMID_ADSP_Q6 0x6
-#define QCOM_SCM_VMID_CP_TOUCH 0x8
-#define QCOM_SCM_VMID_CP_BITSTREAM 0x9
-#define QCOM_SCM_VMID_CP_PIXEL 0xA
-#define QCOM_SCM_VMID_CP_NON_PIXEL 0xB
-#define QCOM_SCM_VMID_CP_CAMERA 0xD
-#define QCOM_SCM_VMID_HLOS_FREE 0xE
-#define QCOM_SCM_VMID_MSS_MSA 0xF
-#define QCOM_SCM_VMID_MSS_NONMSA 0x10
-#define QCOM_SCM_VMID_CP_SEC_DISPLAY 0x11
-#define QCOM_SCM_VMID_CP_APP 0x12
-#define QCOM_SCM_VMID_LPASS 0x16
-#define QCOM_SCM_VMID_WLAN 0x18
-#define QCOM_SCM_VMID_WLAN_CE 0x19
-#define QCOM_SCM_VMID_CP_SPSS_SP 0x1A
-#define QCOM_SCM_VMID_CP_CAMERA_PREVIEW 0x1D
-#define QCOM_SCM_VMID_CDSP 0x1E
-#define QCOM_SCM_VMID_CP_SPSS_SP_SHARED 0x22
-#define QCOM_SCM_VMID_CP_SPSS_HLOS_SHARED 0x24
-#define QCOM_SCM_VMID_ADSP_HEAP 0x25
-#define QCOM_SCM_VMID_CP_CDSP 0x2A
-#define QCOM_SCM_VMID_NAV 0x2B
-#define QCOM_SCM_VMID_TVM 0x2D
-#define QCOM_SCM_VMID_OEMVM 0x31
-
-#endif
diff --git a/include/dt-bindings/gpio/meson-a1-gpio.h b/include/dt-bindings/gpio/meson-a1-gpio.h
deleted file mode 100644
index 40e57a5..0000000
--- a/include/dt-bindings/gpio/meson-a1-gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
- * Author: Qianggui Song <qianggui.song@amlogic.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_A1_GPIO_H
-#define _DT_BINDINGS_MESON_A1_GPIO_H
-
-#define GPIOP_0 0
-#define GPIOP_1 1
-#define GPIOP_2 2
-#define GPIOP_3 3
-#define GPIOP_4 4
-#define GPIOP_5 5
-#define GPIOP_6 6
-#define GPIOP_7 7
-#define GPIOP_8 8
-#define GPIOP_9 9
-#define GPIOP_10 10
-#define GPIOP_11 11
-#define GPIOP_12 12
-#define GPIOB_0 13
-#define GPIOB_1 14
-#define GPIOB_2 15
-#define GPIOB_3 16
-#define GPIOB_4 17
-#define GPIOB_5 18
-#define GPIOB_6 19
-#define GPIOX_0 20
-#define GPIOX_1 21
-#define GPIOX_2 22
-#define GPIOX_3 23
-#define GPIOX_4 24
-#define GPIOX_5 25
-#define GPIOX_6 26
-#define GPIOX_7 27
-#define GPIOX_8 28
-#define GPIOX_9 29
-#define GPIOX_10 30
-#define GPIOX_11 31
-#define GPIOX_12 32
-#define GPIOX_13 33
-#define GPIOX_14 34
-#define GPIOX_15 35
-#define GPIOX_16 36
-#define GPIOF_0 37
-#define GPIOF_1 38
-#define GPIOF_2 39
-#define GPIOF_3 40
-#define GPIOF_4 41
-#define GPIOF_5 42
-#define GPIOF_6 43
-#define GPIOF_7 44
-#define GPIOF_8 45
-#define GPIOF_9 46
-#define GPIOF_10 47
-#define GPIOF_11 48
-#define GPIOF_12 49
-#define GPIOA_0 50
-#define GPIOA_1 51
-#define GPIOA_2 52
-#define GPIOA_3 53
-#define GPIOA_4 54
-#define GPIOA_5 55
-#define GPIOA_6 56
-#define GPIOA_7 57
-#define GPIOA_8 58
-#define GPIOA_9 59
-#define GPIOA_10 60
-#define GPIOA_11 61
-
-#endif /* _DT_BINDINGS_MESON_A1_GPIO_H */
diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
deleted file mode 100644
index 08adfe2..0000000
--- a/include/dt-bindings/iio/qcom,spmi-vadc.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2012-2014,2018,2020 The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H
-#define _DT_BINDINGS_QCOM_SPMI_VADC_H
-
-/* Voltage ADC channels */
-#define VADC_USBIN 0x00
-#define VADC_DCIN 0x01
-#define VADC_VCHG_SNS 0x02
-#define VADC_SPARE1_03 0x03
-#define VADC_USB_ID_MV 0x04
-#define VADC_VCOIN 0x05
-#define VADC_VBAT_SNS 0x06
-#define VADC_VSYS 0x07
-#define VADC_DIE_TEMP 0x08
-#define VADC_REF_625MV 0x09
-#define VADC_REF_1250MV 0x0a
-#define VADC_CHG_TEMP 0x0b
-#define VADC_SPARE1 0x0c
-#define VADC_SPARE2 0x0d
-#define VADC_GND_REF 0x0e
-#define VADC_VDD_VADC 0x0f
-
-#define VADC_P_MUX1_1_1 0x10
-#define VADC_P_MUX2_1_1 0x11
-#define VADC_P_MUX3_1_1 0x12
-#define VADC_P_MUX4_1_1 0x13
-#define VADC_P_MUX5_1_1 0x14
-#define VADC_P_MUX6_1_1 0x15
-#define VADC_P_MUX7_1_1 0x16
-#define VADC_P_MUX8_1_1 0x17
-#define VADC_P_MUX9_1_1 0x18
-#define VADC_P_MUX10_1_1 0x19
-#define VADC_P_MUX11_1_1 0x1a
-#define VADC_P_MUX12_1_1 0x1b
-#define VADC_P_MUX13_1_1 0x1c
-#define VADC_P_MUX14_1_1 0x1d
-#define VADC_P_MUX15_1_1 0x1e
-#define VADC_P_MUX16_1_1 0x1f
-
-#define VADC_P_MUX1_1_3 0x20
-#define VADC_P_MUX2_1_3 0x21
-#define VADC_P_MUX3_1_3 0x22
-#define VADC_P_MUX4_1_3 0x23
-#define VADC_P_MUX5_1_3 0x24
-#define VADC_P_MUX6_1_3 0x25
-#define VADC_P_MUX7_1_3 0x26
-#define VADC_P_MUX8_1_3 0x27
-#define VADC_P_MUX9_1_3 0x28
-#define VADC_P_MUX10_1_3 0x29
-#define VADC_P_MUX11_1_3 0x2a
-#define VADC_P_MUX12_1_3 0x2b
-#define VADC_P_MUX13_1_3 0x2c
-#define VADC_P_MUX14_1_3 0x2d
-#define VADC_P_MUX15_1_3 0x2e
-#define VADC_P_MUX16_1_3 0x2f
-
-#define VADC_LR_MUX1_BAT_THERM 0x30
-#define VADC_LR_MUX2_BAT_ID 0x31
-#define VADC_LR_MUX3_XO_THERM 0x32
-#define VADC_LR_MUX4_AMUX_THM1 0x33
-#define VADC_LR_MUX5_AMUX_THM2 0x34
-#define VADC_LR_MUX6_AMUX_THM3 0x35
-#define VADC_LR_MUX7_HW_ID 0x36
-#define VADC_LR_MUX8_AMUX_THM4 0x37
-#define VADC_LR_MUX9_AMUX_THM5 0x38
-#define VADC_LR_MUX10_USB_ID 0x39
-#define VADC_AMUX_PU1 0x3a
-#define VADC_AMUX_PU2 0x3b
-#define VADC_LR_MUX3_BUF_XO_THERM 0x3c
-
-#define VADC_LR_MUX1_PU1_BAT_THERM 0x70
-#define VADC_LR_MUX2_PU1_BAT_ID 0x71
-#define VADC_LR_MUX3_PU1_XO_THERM 0x72
-#define VADC_LR_MUX4_PU1_AMUX_THM1 0x73
-#define VADC_LR_MUX5_PU1_AMUX_THM2 0x74
-#define VADC_LR_MUX6_PU1_AMUX_THM3 0x75
-#define VADC_LR_MUX7_PU1_AMUX_HW_ID 0x76
-#define VADC_LR_MUX8_PU1_AMUX_THM4 0x77
-#define VADC_LR_MUX9_PU1_AMUX_THM5 0x78
-#define VADC_LR_MUX10_PU1_AMUX_USB_ID 0x79
-#define VADC_LR_MUX3_BUF_PU1_XO_THERM 0x7c
-
-#define VADC_LR_MUX1_PU2_BAT_THERM 0xb0
-#define VADC_LR_MUX2_PU2_BAT_ID 0xb1
-#define VADC_LR_MUX3_PU2_XO_THERM 0xb2
-#define VADC_LR_MUX4_PU2_AMUX_THM1 0xb3
-#define VADC_LR_MUX5_PU2_AMUX_THM2 0xb4
-#define VADC_LR_MUX6_PU2_AMUX_THM3 0xb5
-#define VADC_LR_MUX7_PU2_AMUX_HW_ID 0xb6
-#define VADC_LR_MUX8_PU2_AMUX_THM4 0xb7
-#define VADC_LR_MUX9_PU2_AMUX_THM5 0xb8
-#define VADC_LR_MUX10_PU2_AMUX_USB_ID 0xb9
-#define VADC_LR_MUX3_BUF_PU2_XO_THERM 0xbc
-
-#define VADC_LR_MUX1_PU1_PU2_BAT_THERM 0xf0
-#define VADC_LR_MUX2_PU1_PU2_BAT_ID 0xf1
-#define VADC_LR_MUX3_PU1_PU2_XO_THERM 0xf2
-#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1 0xf3
-#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2 0xf4
-#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3 0xf5
-#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID 0xf6
-#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4 0xf7
-#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5 0xf8
-#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID 0xf9
-#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM 0xfc
-
-/* ADC channels for SPMI PMIC5 */
-
-#define ADC5_REF_GND 0x00
-#define ADC5_1P25VREF 0x01
-#define ADC5_VREF_VADC 0x02
-#define ADC5_VREF_VADC5_DIV_3 0x82
-#define ADC5_VPH_PWR 0x83
-#define ADC5_VBAT_SNS 0x84
-#define ADC5_VCOIN 0x85
-#define ADC5_DIE_TEMP 0x06
-#define ADC5_USB_IN_I 0x07
-#define ADC5_USB_IN_V_16 0x08
-#define ADC5_CHG_TEMP 0x09
-#define ADC5_BAT_THERM 0x0a
-#define ADC5_BAT_ID 0x0b
-#define ADC5_XO_THERM 0x0c
-#define ADC5_AMUX_THM1 0x0d
-#define ADC5_AMUX_THM2 0x0e
-#define ADC5_AMUX_THM3 0x0f
-#define ADC5_AMUX_THM4 0x10
-#define ADC5_AMUX_THM5 0x11
-#define ADC5_GPIO1 0x12
-#define ADC5_GPIO2 0x13
-#define ADC5_GPIO3 0x14
-#define ADC5_GPIO4 0x15
-#define ADC5_GPIO5 0x16
-#define ADC5_GPIO6 0x17
-#define ADC5_GPIO7 0x18
-#define ADC5_SBUx 0x99
-#define ADC5_MID_CHG_DIV6 0x1e
-#define ADC5_OFF 0xff
-
-/* 30k pull-up1 */
-#define ADC5_BAT_THERM_30K_PU 0x2a
-#define ADC5_BAT_ID_30K_PU 0x2b
-#define ADC5_XO_THERM_30K_PU 0x2c
-#define ADC5_AMUX_THM1_30K_PU 0x2d
-#define ADC5_AMUX_THM2_30K_PU 0x2e
-#define ADC5_AMUX_THM3_30K_PU 0x2f
-#define ADC5_AMUX_THM4_30K_PU 0x30
-#define ADC5_AMUX_THM5_30K_PU 0x31
-#define ADC5_GPIO1_30K_PU 0x32
-#define ADC5_GPIO2_30K_PU 0x33
-#define ADC5_GPIO3_30K_PU 0x34
-#define ADC5_GPIO4_30K_PU 0x35
-#define ADC5_GPIO5_30K_PU 0x36
-#define ADC5_GPIO6_30K_PU 0x37
-#define ADC5_GPIO7_30K_PU 0x38
-#define ADC5_SBUx_30K_PU 0x39
-
-/* 100k pull-up2 */
-#define ADC5_BAT_THERM_100K_PU 0x4a
-#define ADC5_BAT_ID_100K_PU 0x4b
-#define ADC5_XO_THERM_100K_PU 0x4c
-#define ADC5_AMUX_THM1_100K_PU 0x4d
-#define ADC5_AMUX_THM2_100K_PU 0x4e
-#define ADC5_AMUX_THM3_100K_PU 0x4f
-#define ADC5_AMUX_THM4_100K_PU 0x50
-#define ADC5_AMUX_THM5_100K_PU 0x51
-#define ADC5_GPIO1_100K_PU 0x52
-#define ADC5_GPIO2_100K_PU 0x53
-#define ADC5_GPIO3_100K_PU 0x54
-#define ADC5_GPIO4_100K_PU 0x55
-#define ADC5_GPIO5_100K_PU 0x56
-#define ADC5_GPIO6_100K_PU 0x57
-#define ADC5_GPIO7_100K_PU 0x58
-#define ADC5_SBUx_100K_PU 0x59
-
-/* 400k pull-up3 */
-#define ADC5_BAT_THERM_400K_PU 0x6a
-#define ADC5_BAT_ID_400K_PU 0x6b
-#define ADC5_XO_THERM_400K_PU 0x6c
-#define ADC5_AMUX_THM1_400K_PU 0x6d
-#define ADC5_AMUX_THM2_400K_PU 0x6e
-#define ADC5_AMUX_THM3_400K_PU 0x6f
-#define ADC5_AMUX_THM4_400K_PU 0x70
-#define ADC5_AMUX_THM5_400K_PU 0x71
-#define ADC5_GPIO1_400K_PU 0x72
-#define ADC5_GPIO2_400K_PU 0x73
-#define ADC5_GPIO3_400K_PU 0x74
-#define ADC5_GPIO4_400K_PU 0x75
-#define ADC5_GPIO5_400K_PU 0x76
-#define ADC5_GPIO6_400K_PU 0x77
-#define ADC5_GPIO7_400K_PU 0x78
-#define ADC5_SBUx_400K_PU 0x79
-
-/* 1/3 Divider */
-#define ADC5_GPIO1_DIV3 0x92
-#define ADC5_GPIO2_DIV3 0x93
-#define ADC5_GPIO3_DIV3 0x94
-#define ADC5_GPIO4_DIV3 0x95
-#define ADC5_GPIO5_DIV3 0x96
-#define ADC5_GPIO6_DIV3 0x97
-#define ADC5_GPIO7_DIV3 0x98
-#define ADC5_SBUx_DIV3 0x99
-
-/* Current and combined current/voltage channels */
-#define ADC5_INT_EXT_ISENSE 0xa1
-#define ADC5_PARALLEL_ISENSE 0xa5
-#define ADC5_CUR_REPLICA_VDS 0xa7
-#define ADC5_CUR_SENS_BATFET_VDS_OFFSET 0xa9
-#define ADC5_CUR_SENS_REPLICA_VDS_OFFSET 0xab
-#define ADC5_EXT_SENS_OFFSET 0xad
-
-#define ADC5_INT_EXT_ISENSE_VBAT_VDATA 0xb0
-#define ADC5_INT_EXT_ISENSE_VBAT_IDATA 0xb1
-#define ADC5_EXT_ISENSE_VBAT_VDATA 0xb2
-#define ADC5_EXT_ISENSE_VBAT_IDATA 0xb3
-#define ADC5_PARALLEL_ISENSE_VBAT_VDATA 0xb4
-#define ADC5_PARALLEL_ISENSE_VBAT_IDATA 0xb5
-
-#define ADC5_MAX_CHANNEL 0xc0
-
-/* ADC channels for ADC for PMIC7 */
-
-#define ADC7_REF_GND 0x00
-#define ADC7_1P25VREF 0x01
-#define ADC7_VREF_VADC 0x02
-#define ADC7_DIE_TEMP 0x03
-
-#define ADC7_AMUX_THM1 0x04
-#define ADC7_AMUX_THM2 0x05
-#define ADC7_AMUX_THM3 0x06
-#define ADC7_AMUX_THM4 0x07
-#define ADC7_AMUX_THM5 0x08
-#define ADC7_AMUX_THM6 0x09
-#define ADC7_GPIO1 0x0a
-#define ADC7_GPIO2 0x0b
-#define ADC7_GPIO3 0x0c
-#define ADC7_GPIO4 0x0d
-
-#define ADC7_CHG_TEMP 0x10
-#define ADC7_USB_IN_V_16 0x11
-#define ADC7_VDC_16 0x12
-#define ADC7_CC1_ID 0x13
-#define ADC7_VREF_BAT_THERM 0x15
-#define ADC7_IIN_FB 0x17
-
-/* 30k pull-up1 */
-#define ADC7_AMUX_THM1_30K_PU 0x24
-#define ADC7_AMUX_THM2_30K_PU 0x25
-#define ADC7_AMUX_THM3_30K_PU 0x26
-#define ADC7_AMUX_THM4_30K_PU 0x27
-#define ADC7_AMUX_THM5_30K_PU 0x28
-#define ADC7_AMUX_THM6_30K_PU 0x29
-#define ADC7_GPIO1_30K_PU 0x2a
-#define ADC7_GPIO2_30K_PU 0x2b
-#define ADC7_GPIO3_30K_PU 0x2c
-#define ADC7_GPIO4_30K_PU 0x2d
-#define ADC7_CC1_ID_30K_PU 0x33
-
-/* 100k pull-up2 */
-#define ADC7_AMUX_THM1_100K_PU 0x44
-#define ADC7_AMUX_THM2_100K_PU 0x45
-#define ADC7_AMUX_THM3_100K_PU 0x46
-#define ADC7_AMUX_THM4_100K_PU 0x47
-#define ADC7_AMUX_THM5_100K_PU 0x48
-#define ADC7_AMUX_THM6_100K_PU 0x49
-#define ADC7_GPIO1_100K_PU 0x4a
-#define ADC7_GPIO2_100K_PU 0x4b
-#define ADC7_GPIO3_100K_PU 0x4c
-#define ADC7_GPIO4_100K_PU 0x4d
-#define ADC7_CC1_ID_100K_PU 0x53
-
-/* 400k pull-up3 */
-#define ADC7_AMUX_THM1_400K_PU 0x64
-#define ADC7_AMUX_THM2_400K_PU 0x65
-#define ADC7_AMUX_THM3_400K_PU 0x66
-#define ADC7_AMUX_THM4_400K_PU 0x67
-#define ADC7_AMUX_THM5_400K_PU 0x68
-#define ADC7_AMUX_THM6_400K_PU 0x69
-#define ADC7_GPIO1_400K_PU 0x6a
-#define ADC7_GPIO2_400K_PU 0x6b
-#define ADC7_GPIO3_400K_PU 0x6c
-#define ADC7_GPIO4_400K_PU 0x6d
-#define ADC7_CC1_ID_400K_PU 0x73
-
-/* 1/3 Divider */
-#define ADC7_GPIO1_DIV3 0x8a
-#define ADC7_GPIO2_DIV3 0x8b
-#define ADC7_GPIO3_DIV3 0x8c
-#define ADC7_GPIO4_DIV3 0x8d
-
-#define ADC7_VPH_PWR 0x8e
-#define ADC7_VBAT_SNS 0x8f
-
-#define ADC7_SBUx 0x94
-#define ADC7_VBAT_2S_MID 0x96
-
-#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
diff --git a/include/dt-bindings/interconnect/qcom,msm8916.h b/include/dt-bindings/interconnect/qcom,msm8916.h
deleted file mode 100644
index 359a75f..0000000
--- a/include/dt-bindings/interconnect/qcom,msm8916.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Qualcomm interconnect IDs
- *
- * Copyright (c) 2019, Linaro Ltd.
- * Author: Georgi Djakov <georgi.djakov@linaro.org>
- */
-
-#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
-#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
-
-#define BIMC_SNOC_SLV 0
-#define MASTER_JPEG 1
-#define MASTER_MDP_PORT0 2
-#define MASTER_QDSS_BAM 3
-#define MASTER_QDSS_ETR 4
-#define MASTER_SNOC_CFG 5
-#define MASTER_VFE 6
-#define MASTER_VIDEO_P0 7
-#define SNOC_MM_INT_0 8
-#define SNOC_MM_INT_1 9
-#define SNOC_MM_INT_2 10
-#define SNOC_MM_INT_BIMC 11
-#define PCNOC_SNOC_SLV 12
-#define SLAVE_APSS 13
-#define SLAVE_CATS_128 14
-#define SLAVE_OCMEM_64 15
-#define SLAVE_IMEM 16
-#define SLAVE_QDSS_STM 17
-#define SLAVE_SRVC_SNOC 18
-#define SNOC_BIMC_0_MAS 19
-#define SNOC_BIMC_1_MAS 20
-#define SNOC_INT_0 21
-#define SNOC_INT_1 22
-#define SNOC_INT_BIMC 23
-#define SNOC_PCNOC_MAS 24
-#define SNOC_QDSS_INT 25
-
-#define BIMC_SNOC_MAS 0
-#define MASTER_AMPSS_M0 1
-#define MASTER_GRAPHICS_3D 2
-#define MASTER_TCU0 3
-#define MASTER_TCU1 4
-#define SLAVE_AMPSS_L2 5
-#define SLAVE_EBI_CH0 6
-#define SNOC_BIMC_0_SLV 7
-#define SNOC_BIMC_1_SLV 8
-
-#define MASTER_BLSP_1 0
-#define MASTER_DEHR 1
-#define MASTER_LPASS 2
-#define MASTER_CRYPTO_CORE0 3
-#define MASTER_SDCC_1 4
-#define MASTER_SDCC_2 5
-#define MASTER_SPDM 6
-#define MASTER_USB_HS 7
-#define PCNOC_INT_0 8
-#define PCNOC_INT_1 9
-#define PCNOC_MAS_0 10
-#define PCNOC_MAS_1 11
-#define PCNOC_SLV_0 12
-#define PCNOC_SLV_1 13
-#define PCNOC_SLV_2 14
-#define PCNOC_SLV_3 15
-#define PCNOC_SLV_4 16
-#define PCNOC_SLV_8 17
-#define PCNOC_SLV_9 18
-#define PCNOC_SNOC_MAS 19
-#define SLAVE_BIMC_CFG 20
-#define SLAVE_BLSP_1 21
-#define SLAVE_BOOT_ROM 22
-#define SLAVE_CAMERA_CFG 23
-#define SLAVE_CLK_CTL 24
-#define SLAVE_CRYPTO_0_CFG 25
-#define SLAVE_DEHR_CFG 26
-#define SLAVE_DISPLAY_CFG 27
-#define SLAVE_GRAPHICS_3D_CFG 28
-#define SLAVE_IMEM_CFG 29
-#define SLAVE_LPASS 30
-#define SLAVE_MPM 31
-#define SLAVE_MSG_RAM 32
-#define SLAVE_MSS 33
-#define SLAVE_PDM 34
-#define SLAVE_PMIC_ARB 35
-#define SLAVE_PCNOC_CFG 36
-#define SLAVE_PRNG 37
-#define SLAVE_QDSS_CFG 38
-#define SLAVE_RBCPR_CFG 39
-#define SLAVE_SDCC_1 40
-#define SLAVE_SDCC_2 41
-#define SLAVE_SECURITY 42
-#define SLAVE_SNOC_CFG 43
-#define SLAVE_SPDM 44
-#define SLAVE_TCSR 45
-#define SLAVE_TLMM 46
-#define SLAVE_USB_HS 47
-#define SLAVE_VENUS_CFG 48
-#define SNOC_PCNOC_SLV 49
-
-#endif
diff --git a/include/dt-bindings/interconnect/qcom,msm8996-cbf.h b/include/dt-bindings/interconnect/qcom,msm8996-cbf.h
deleted file mode 100644
index aac5e69..0000000
--- a/include/dt-bindings/interconnect/qcom,msm8996-cbf.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-/*
- * Copyright (C) 2023 Linaro Ltd. All rights reserved.
- */
-
-#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_CBF_H
-#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_CBF_H
-
-#define MASTER_CBF_M4M 0
-#define SLAVE_CBF_M4M 1
-
-#endif
diff --git a/include/dt-bindings/interconnect/qcom,msm8996.h b/include/dt-bindings/interconnect/qcom,msm8996.h
deleted file mode 100644
index a0b7c0e..0000000
--- a/include/dt-bindings/interconnect/qcom,msm8996.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
-/*
- * Qualcomm MSM8996 interconnect IDs
- *
- * Copyright (c) 2021 Yassine Oudjana <y.oudjana@protonmail.com>
- */
-
-#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_H
-#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_H
-
-/* A0NOC */
-#define MASTER_PCIE_0 0
-#define MASTER_PCIE_1 1
-#define MASTER_PCIE_2 2
-
-/* A1NOC */
-#define MASTER_CNOC_A1NOC 0
-#define MASTER_CRYPTO_CORE0 1
-#define MASTER_PNOC_A1NOC 2
-
-/* A2NOC */
-#define MASTER_USB3 0
-#define MASTER_IPA 1
-#define MASTER_UFS 2
-
-/* BIMC */
-#define MASTER_AMPSS_M0 0
-#define MASTER_GRAPHICS_3D 1
-#define MASTER_MNOC_BIMC 2
-#define MASTER_SNOC_BIMC 3
-#define SLAVE_EBI_CH0 4
-#define SLAVE_HMSS_L3 5
-#define SLAVE_BIMC_SNOC_0 6
-#define SLAVE_BIMC_SNOC_1 7
-
-/* CNOC */
-#define MASTER_SNOC_CNOC 0
-#define MASTER_QDSS_DAP 1
-#define SLAVE_CNOC_A1NOC 2
-#define SLAVE_CLK_CTL 3
-#define SLAVE_TCSR 4
-#define SLAVE_TLMM 5
-#define SLAVE_CRYPTO_0_CFG 6
-#define SLAVE_MPM 7
-#define SLAVE_PIMEM_CFG 8
-#define SLAVE_IMEM_CFG 9
-#define SLAVE_MESSAGE_RAM 10
-#define SLAVE_BIMC_CFG 11
-#define SLAVE_PMIC_ARB 12
-#define SLAVE_PRNG 13
-#define SLAVE_DCC_CFG 14
-#define SLAVE_RBCPR_MX 15
-#define SLAVE_QDSS_CFG 16
-#define SLAVE_RBCPR_CX 17
-#define SLAVE_QDSS_RBCPR_APU 18
-#define SLAVE_CNOC_MNOC_CFG 19
-#define SLAVE_SNOC_CFG 20
-#define SLAVE_SNOC_MPU_CFG 21
-#define SLAVE_EBI1_PHY_CFG 22
-#define SLAVE_A0NOC_CFG 23
-#define SLAVE_PCIE_1_CFG 24
-#define SLAVE_PCIE_2_CFG 25
-#define SLAVE_PCIE_0_CFG 26
-#define SLAVE_PCIE20_AHB2PHY 27
-#define SLAVE_A0NOC_MPU_CFG 28
-#define SLAVE_UFS_CFG 29
-#define SLAVE_A1NOC_CFG 30
-#define SLAVE_A1NOC_MPU_CFG 31
-#define SLAVE_A2NOC_CFG 32
-#define SLAVE_A2NOC_MPU_CFG 33
-#define SLAVE_SSC_CFG 34
-#define SLAVE_A0NOC_SMMU_CFG 35
-#define SLAVE_A1NOC_SMMU_CFG 36
-#define SLAVE_A2NOC_SMMU_CFG 37
-#define SLAVE_LPASS_SMMU_CFG 38
-#define SLAVE_CNOC_MNOC_MMSS_CFG 39
-
-/* MNOC */
-#define MASTER_CNOC_MNOC_CFG 0
-#define MASTER_CPP 1
-#define MASTER_JPEG 2
-#define MASTER_MDP_PORT0 3
-#define MASTER_MDP_PORT1 4
-#define MASTER_ROTATOR 5
-#define MASTER_VIDEO_P0 6
-#define MASTER_VFE 7
-#define MASTER_SNOC_VMEM 8
-#define MASTER_VIDEO_P0_OCMEM 9
-#define MASTER_CNOC_MNOC_MMSS_CFG 10
-#define SLAVE_MNOC_BIMC 11
-#define SLAVE_VMEM 12
-#define SLAVE_SERVICE_MNOC 13
-#define SLAVE_MMAGIC_CFG 14
-#define SLAVE_CPR_CFG 15
-#define SLAVE_MISC_CFG 16
-#define SLAVE_VENUS_THROTTLE_CFG 17
-#define SLAVE_VENUS_CFG 18
-#define SLAVE_VMEM_CFG 19
-#define SLAVE_DSA_CFG 20
-#define SLAVE_MMSS_CLK_CFG 21
-#define SLAVE_DSA_MPU_CFG 22
-#define SLAVE_MNOC_MPU_CFG 23
-#define SLAVE_DISPLAY_CFG 24
-#define SLAVE_DISPLAY_THROTTLE_CFG 25
-#define SLAVE_CAMERA_CFG 26
-#define SLAVE_CAMERA_THROTTLE_CFG 27
-#define SLAVE_GRAPHICS_3D_CFG 28
-#define SLAVE_SMMU_MDP_CFG 29
-#define SLAVE_SMMU_ROT_CFG 30
-#define SLAVE_SMMU_VENUS_CFG 31
-#define SLAVE_SMMU_CPP_CFG 32
-#define SLAVE_SMMU_JPEG_CFG 33
-#define SLAVE_SMMU_VFE_CFG 34
-
-/* PNOC */
-#define MASTER_SNOC_PNOC 0
-#define MASTER_SDCC_1 1
-#define MASTER_SDCC_2 2
-#define MASTER_SDCC_4 3
-#define MASTER_USB_HS 4
-#define MASTER_BLSP_1 5
-#define MASTER_BLSP_2 6
-#define MASTER_TSIF 7
-#define SLAVE_PNOC_A1NOC 8
-#define SLAVE_USB_HS 9
-#define SLAVE_SDCC_2 10
-#define SLAVE_SDCC_4 11
-#define SLAVE_TSIF 12
-#define SLAVE_BLSP_2 13
-#define SLAVE_SDCC_1 14
-#define SLAVE_BLSP_1 15
-#define SLAVE_PDM 16
-#define SLAVE_AHB2PHY 17
-
-/* SNOC */
-#define MASTER_HMSS 0
-#define MASTER_QDSS_BAM 1
-#define MASTER_SNOC_CFG 2
-#define MASTER_BIMC_SNOC_0 3
-#define MASTER_BIMC_SNOC_1 4
-#define MASTER_A0NOC_SNOC 5
-#define MASTER_A1NOC_SNOC 6
-#define MASTER_A2NOC_SNOC 7
-#define MASTER_QDSS_ETR 8
-#define SLAVE_A0NOC_SNOC 9
-#define SLAVE_A1NOC_SNOC 10
-#define SLAVE_A2NOC_SNOC 11
-#define SLAVE_HMSS 12
-#define SLAVE_LPASS 13
-#define SLAVE_USB3 14
-#define SLAVE_SNOC_BIMC 15
-#define SLAVE_SNOC_CNOC 16
-#define SLAVE_IMEM 17
-#define SLAVE_PIMEM 18
-#define SLAVE_SNOC_VMEM 19
-#define SLAVE_SNOC_PNOC 20
-#define SLAVE_QDSS_STM 21
-#define SLAVE_PCIE_0 22
-#define SLAVE_PCIE_1 23
-#define SLAVE_PCIE_2 24
-#define SLAVE_SERVICE_SNOC 25
-
-#endif
diff --git a/include/dt-bindings/interconnect/qcom,osm-l3.h b/include/dt-bindings/interconnect/qcom,osm-l3.h
deleted file mode 100644
index 61ef649..0000000
--- a/include/dt-bindings/interconnect/qcom,osm-l3.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2019 The Linux Foundation. All rights reserved.
- */
-
-#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
-#define __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
-
-#define MASTER_OSM_L3_APPS 0
-#define SLAVE_OSM_L3 1
-
-#define MASTER_EPSS_L3_APPS 0
-#define SLAVE_EPSS_L3_SHARED 1
-
-#endif
diff --git a/include/dt-bindings/interconnect/qcom,sdm845.h b/include/dt-bindings/interconnect/qcom,sdm845.h
deleted file mode 100644
index 67b500e..0000000
--- a/include/dt-bindings/interconnect/qcom,sdm845.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Qualcomm SDM845 interconnect IDs
- *
- * Copyright (c) 2018, Linaro Ltd.
- * Author: Georgi Djakov <georgi.djakov@linaro.org>
- */
-
-#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H
-#define __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H
-
-#define MASTER_A1NOC_CFG 0
-#define MASTER_TSIF 1
-#define MASTER_SDCC_2 2
-#define MASTER_SDCC_4 3
-#define MASTER_UFS_CARD 4
-#define MASTER_UFS_MEM 5
-#define MASTER_PCIE_0 6
-#define SLAVE_A1NOC_SNOC 7
-#define SLAVE_SERVICE_A1NOC 8
-#define SLAVE_ANOC_PCIE_A1NOC_SNOC 9
-#define MASTER_QUP_1 10
-
-#define MASTER_A2NOC_CFG 0
-#define MASTER_QDSS_BAM 1
-#define MASTER_CNOC_A2NOC 2
-#define MASTER_CRYPTO 3
-#define MASTER_IPA 4
-#define MASTER_PCIE_1 5
-#define MASTER_QDSS_ETR 6
-#define MASTER_USB3_0 7
-#define MASTER_USB3_1 8
-#define SLAVE_A2NOC_SNOC 9
-#define SLAVE_ANOC_PCIE_SNOC 10
-#define SLAVE_SERVICE_A2NOC 11
-#define MASTER_QUP_2 12
-
-#define MASTER_SPDM 0
-#define MASTER_TIC 1
-#define MASTER_SNOC_CNOC 2
-#define MASTER_QDSS_DAP 3
-#define SLAVE_A1NOC_CFG 4
-#define SLAVE_A2NOC_CFG 5
-#define SLAVE_AOP 6
-#define SLAVE_AOSS 7
-#define SLAVE_CAMERA_CFG 8
-#define SLAVE_CLK_CTL 9
-#define SLAVE_CDSP_CFG 10
-#define SLAVE_RBCPR_CX_CFG 11
-#define SLAVE_CRYPTO_0_CFG 12
-#define SLAVE_DCC_CFG 13
-#define SLAVE_CNOC_DDRSS 14
-#define SLAVE_DISPLAY_CFG 15
-#define SLAVE_GLM 16
-#define SLAVE_GFX3D_CFG 17
-#define SLAVE_IMEM_CFG 18
-#define SLAVE_IPA_CFG 19
-#define SLAVE_CNOC_MNOC_CFG 20
-#define SLAVE_PCIE_0_CFG 21
-#define SLAVE_PCIE_1_CFG 22
-#define SLAVE_PDM 23
-#define SLAVE_SOUTH_PHY_CFG 24
-#define SLAVE_PIMEM_CFG 25
-#define SLAVE_PRNG 26
-#define SLAVE_QDSS_CFG 27
-#define SLAVE_BLSP_2 28
-#define SLAVE_BLSP_1 29
-#define SLAVE_SDCC_2 30
-#define SLAVE_SDCC_4 31
-#define SLAVE_SNOC_CFG 32
-#define SLAVE_SPDM_WRAPPER 33
-#define SLAVE_SPSS_CFG 34
-#define SLAVE_TCSR 35
-#define SLAVE_TLMM_NORTH 36
-#define SLAVE_TLMM_SOUTH 37
-#define SLAVE_TSIF 38
-#define SLAVE_UFS_CARD_CFG 39
-#define SLAVE_UFS_MEM_CFG 40
-#define SLAVE_USB3_0 41
-#define SLAVE_USB3_1 42
-#define SLAVE_VENUS_CFG 43
-#define SLAVE_VSENSE_CTRL_CFG 44
-#define SLAVE_CNOC_A2NOC 45
-#define SLAVE_SERVICE_CNOC 46
-
-#define MASTER_CNOC_DC_NOC 0
-#define SLAVE_LLCC_CFG 1
-#define SLAVE_MEM_NOC_CFG 2
-
-#define MASTER_APPSS_PROC 0
-#define MASTER_GNOC_CFG 1
-#define SLAVE_GNOC_SNOC 2
-#define SLAVE_GNOC_MEM_NOC 3
-#define SLAVE_SERVICE_GNOC 4
-
-#define MASTER_TCU_0 0
-#define MASTER_MEM_NOC_CFG 1
-#define MASTER_GNOC_MEM_NOC 2
-#define MASTER_MNOC_HF_MEM_NOC 3
-#define MASTER_MNOC_SF_MEM_NOC 4
-#define MASTER_SNOC_GC_MEM_NOC 5
-#define MASTER_SNOC_SF_MEM_NOC 6
-#define MASTER_GFX3D 7
-#define SLAVE_MSS_PROC_MS_MPU_CFG 8
-#define SLAVE_MEM_NOC_GNOC 9
-#define SLAVE_LLCC 10
-#define SLAVE_MEM_NOC_SNOC 11
-#define SLAVE_SERVICE_MEM_NOC 12
-#define MASTER_LLCC 13
-#define SLAVE_EBI1 14
-
-#define MASTER_CNOC_MNOC_CFG 0
-#define MASTER_CAMNOC_HF0 1
-#define MASTER_CAMNOC_HF1 2
-#define MASTER_CAMNOC_SF 3
-#define MASTER_MDP0 4
-#define MASTER_MDP1 5
-#define MASTER_ROTATOR 6
-#define MASTER_VIDEO_P0 7
-#define MASTER_VIDEO_P1 8
-#define MASTER_VIDEO_PROC 9
-#define SLAVE_MNOC_SF_MEM_NOC 10
-#define SLAVE_MNOC_HF_MEM_NOC 11
-#define SLAVE_SERVICE_MNOC 12
-#define MASTER_CAMNOC_HF0_UNCOMP 13
-#define MASTER_CAMNOC_HF1_UNCOMP 14
-#define MASTER_CAMNOC_SF_UNCOMP 15
-#define SLAVE_CAMNOC_UNCOMP 16
-
-#define MASTER_SNOC_CFG 0
-#define MASTER_A1NOC_SNOC 1
-#define MASTER_A2NOC_SNOC 2
-#define MASTER_GNOC_SNOC 3
-#define MASTER_MEM_NOC_SNOC 4
-#define MASTER_ANOC_PCIE_SNOC 5
-#define MASTER_PIMEM 6
-#define MASTER_GIC 7
-#define SLAVE_APPSS 8
-#define SLAVE_SNOC_CNOC 9
-#define SLAVE_SNOC_MEM_NOC_GC 10
-#define SLAVE_SNOC_MEM_NOC_SF 11
-#define SLAVE_IMEM 12
-#define SLAVE_PCIE_0 13
-#define SLAVE_PCIE_1 14
-#define SLAVE_PIMEM 15
-#define SLAVE_SERVICE_SNOC 16
-#define SLAVE_QDSS_STM 17
-#define SLAVE_TCU 18
-
-#endif
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
deleted file mode 100644
index 35b6f69..0000000
--- a/include/dt-bindings/interrupt-controller/arm-gic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-/*
- * This header provides constants for the ARM GIC.
- */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* interrupt specifier cell 0 */
-
-#define GIC_SPI 0
-#define GIC_PPI 1
-
-/*
- * Interrupt specifier cell 2.
- * The flags in irq.h are valid, plus those below.
- */
-#define GIC_CPU_MASK_RAW(x) ((x) << 8)
-#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
-
-#endif
diff --git a/include/dt-bindings/phy/phy-qcom-qmp.h b/include/dt-bindings/phy/phy-qcom-qmp.h
deleted file mode 100644
index 4edec4c..0000000
--- a/include/dt-bindings/phy/phy-qcom-qmp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
-/*
- * Qualcomm QMP PHY constants
- *
- * Copyright (C) 2022 Linaro Limited
- */
-
-#ifndef _DT_BINDINGS_PHY_QMP
-#define _DT_BINDINGS_PHY_QMP
-
-/* QMP USB4-USB3-DP clocks */
-#define QMP_USB43DP_USB3_PIPE_CLK 0
-#define QMP_USB43DP_DP_LINK_CLK 1
-#define QMP_USB43DP_DP_VCO_DIV_CLK 2
-
-/* QMP USB4-USB3-DP PHYs */
-#define QMP_USB43DP_USB3_PHY 0
-#define QMP_USB43DP_DP_PHY 1
-
-#endif /* _DT_BINDINGS_PHY_QMP */
diff --git a/include/dt-bindings/phy/phy-qcom-qusb2.h b/include/dt-bindings/phy/phy-qcom-qusb2.h
deleted file mode 100644
index 5c5e4d8..0000000
--- a/include/dt-bindings/phy/phy-qcom-qusb2.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_QCOM_PHY_QUSB2_H_
-#define _DT_BINDINGS_QCOM_PHY_QUSB2_H_
-
-/* PHY HSTX TRIM bit values (24mA to 15mA) */
-#define QUSB2_V2_HSTX_TRIM_24_0_MA 0x0
-#define QUSB2_V2_HSTX_TRIM_23_4_MA 0x1
-#define QUSB2_V2_HSTX_TRIM_22_8_MA 0x2
-#define QUSB2_V2_HSTX_TRIM_22_2_MA 0x3
-#define QUSB2_V2_HSTX_TRIM_21_6_MA 0x4
-#define QUSB2_V2_HSTX_TRIM_21_0_MA 0x5
-#define QUSB2_V2_HSTX_TRIM_20_4_MA 0x6
-#define QUSB2_V2_HSTX_TRIM_19_8_MA 0x7
-#define QUSB2_V2_HSTX_TRIM_19_2_MA 0x8
-#define QUSB2_V2_HSTX_TRIM_18_6_MA 0x9
-#define QUSB2_V2_HSTX_TRIM_18_0_MA 0xa
-#define QUSB2_V2_HSTX_TRIM_17_4_MA 0xb
-#define QUSB2_V2_HSTX_TRIM_16_8_MA 0xc
-#define QUSB2_V2_HSTX_TRIM_16_2_MA 0xd
-#define QUSB2_V2_HSTX_TRIM_15_6_MA 0xe
-#define QUSB2_V2_HSTX_TRIM_15_0_MA 0xf
-
-/* PHY PREEMPHASIS bit values */
-#define QUSB2_V2_PREEMPHASIS_NONE 0
-#define QUSB2_V2_PREEMPHASIS_5_PERCENT 1
-#define QUSB2_V2_PREEMPHASIS_10_PERCENT 2
-#define QUSB2_V2_PREEMPHASIS_15_PERCENT 3
-
-/* PHY PREEMPHASIS-WIDTH bit values */
-#define QUSB2_V2_PREEMPHASIS_WIDTH_FULL_BIT 0
-#define QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT 1
-
-#endif
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
deleted file mode 100644
index e5df5ce..0000000
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for the Qualcomm PMIC GPIO binding.
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
-#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
-
-#define PMIC_GPIO_PULL_UP_30 0
-#define PMIC_GPIO_PULL_UP_1P5 1
-#define PMIC_GPIO_PULL_UP_31P5 2
-#define PMIC_GPIO_PULL_UP_1P5_30 3
-
-#define PMIC_GPIO_STRENGTH_NO 0
-#define PMIC_GPIO_STRENGTH_HIGH 1
-#define PMIC_GPIO_STRENGTH_MED 2
-#define PMIC_GPIO_STRENGTH_LOW 3
-
-/*
- * Note: PM8018 GPIO3 and GPIO4 are supporting
- * only S3 and L2 options (1.8V)
- */
-#define PM8018_GPIO_L6 0
-#define PM8018_GPIO_L5 1
-#define PM8018_GPIO_S3 2
-#define PM8018_GPIO_L14 3
-#define PM8018_GPIO_L2 4
-#define PM8018_GPIO_L4 5
-#define PM8018_GPIO_VDD 6
-
-/*
- * Note: PM8038 GPIO7 and GPIO8 are supporting
- * only L11 and L4 options (1.8V)
- */
-#define PM8038_GPIO_VPH 0
-#define PM8038_GPIO_BB 1
-#define PM8038_GPIO_L11 2
-#define PM8038_GPIO_L15 3
-#define PM8038_GPIO_L4 4
-#define PM8038_GPIO_L3 5
-#define PM8038_GPIO_L17 6
-
-#define PM8058_GPIO_VPH 0
-#define PM8058_GPIO_BB 1
-#define PM8058_GPIO_S3 2
-#define PM8058_GPIO_L3 3
-#define PM8058_GPIO_L7 4
-#define PM8058_GPIO_L6 5
-#define PM8058_GPIO_L5 6
-#define PM8058_GPIO_L2 7
-
-/*
- * Note: PM8916 GPIO1 and GPIO2 are supporting
- * only L2(1.15V) and L5(1.8V) options
- */
-#define PM8916_GPIO_VPH 0
-#define PM8916_GPIO_L2 2
-#define PM8916_GPIO_L5 3
-
-#define PM8917_GPIO_VPH 0
-#define PM8917_GPIO_S4 2
-#define PM8917_GPIO_L15 3
-#define PM8917_GPIO_L4 4
-#define PM8917_GPIO_L3 5
-#define PM8917_GPIO_L17 6
-
-#define PM8921_GPIO_VPH 0
-#define PM8921_GPIO_BB 1
-#define PM8921_GPIO_S4 2
-#define PM8921_GPIO_L15 3
-#define PM8921_GPIO_L4 4
-#define PM8921_GPIO_L3 5
-#define PM8921_GPIO_L17 6
-
-/*
- * Note: PM8941 gpios from 15 to 18 are supporting
- * only S3 and L6 options (1.8V)
- */
-#define PM8941_GPIO_VPH 0
-#define PM8941_GPIO_L1 1
-#define PM8941_GPIO_S3 2
-#define PM8941_GPIO_L6 3
-
-/*
- * Note: PMA8084 gpios from 15 to 18 are supporting
- * only S4 and L6 options (1.8V)
- */
-#define PMA8084_GPIO_VPH 0
-#define PMA8084_GPIO_L1 1
-#define PMA8084_GPIO_S4 2
-#define PMA8084_GPIO_L6 3
-
-#define PM8994_GPIO_VPH 0
-#define PM8994_GPIO_S4 2
-#define PM8994_GPIO_L12 3
-
-/* To be used with "function" */
-#define PMIC_GPIO_FUNC_NORMAL "normal"
-#define PMIC_GPIO_FUNC_PAIRED "paired"
-#define PMIC_GPIO_FUNC_FUNC1 "func1"
-#define PMIC_GPIO_FUNC_FUNC2 "func2"
-#define PMIC_GPIO_FUNC_FUNC3 "func3"
-#define PMIC_GPIO_FUNC_FUNC4 "func4"
-#define PMIC_GPIO_FUNC_DTEST1 "dtest1"
-#define PMIC_GPIO_FUNC_DTEST2 "dtest2"
-#define PMIC_GPIO_FUNC_DTEST3 "dtest3"
-#define PMIC_GPIO_FUNC_DTEST4 "dtest4"
-
-#define PM8038_GPIO1_2_LPG_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO3_5V_BOOST_EN PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO4_SSBI_ALT_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO5_6_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO10_11_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO6_7_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO9_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
-#define PM8038_GPIO6_12_KYPD_DRV PMIC_GPIO_FUNC_FUNC2
-
-#define PM8058_GPIO7_8_MP3_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO7_8_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC2
-#define PM8058_GPIO9_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2
-#define PM8058_GPIO24_26_LPG_DRV PMIC_GPIO_FUNC_FUNC2
-#define PM8058_GPIO33_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO34_35_MP3_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO36_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO37_UPL_OUT PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO37_UART_M_RX PMIC_GPIO_FUNC_FUNC2
-#define PM8058_GPIO38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO38_39_CLK_32KHZ PMIC_GPIO_FUNC_FUNC2
-#define PM8058_GPIO39_MP3_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8058_GPIO40_EXT_BB_EN PMIC_GPIO_FUNC_FUNC1
-
-#define PM8916_GPIO1_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
-#define PM8916_GPIO1_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
-#define PM8916_GPIO2_DIV_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8916_GPIO2_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2
-#define PM8916_GPIO3_KEYP_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8916_GPIO4_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
-
-#define PM8917_GPIO9_18_KEYP_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8917_GPIO20_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
-#define PM8917_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2
-#define PM8917_GPIO25_26_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
-#define PM8917_GPIO37_38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8917_GPIO37_38_MP3_CLK PMIC_GPIO_FUNC_FUNC2
-
-#define PM8941_GPIO9_14_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8941_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1
-#define PM8941_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2
-#define PM8941_GPIO23_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
-#define PM8941_GPIO23_26_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2
-#define PM8941_GPIO31_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
-#define PM8941_GPIO33_36_LPG_DRV_3D PMIC_GPIO_FUNC_FUNC1
-#define PM8941_GPIO33_36_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2
-
-#define PMA8084_GPIO4_5_LPG_DRV PMIC_GPIO_FUNC_FUNC1
-#define PMA8084_GPIO7_10_LPG_DRV PMIC_GPIO_FUNC_FUNC1
-#define PMA8084_GPIO5_14_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
-#define PMA8084_GPIO19_21_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
-#define PMA8084_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1
-#define PMA8084_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2
-#define PMA8084_GPIO22_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
-
-#endif
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
deleted file mode 100644
index 32e66ee..0000000
--- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for the Qualcomm PMIC's
- * Multi-Purpose Pin binding.
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H
-#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H
-
-/* power-source */
-
-/* Digital Input/Output: level [PM8058] */
-#define PM8058_MPP_VPH 0
-#define PM8058_MPP_S3 1
-#define PM8058_MPP_L2 2
-#define PM8058_MPP_L3 3
-
-/* Digital Input/Output: level [PM8901] */
-#define PM8901_MPP_MSMIO 0
-#define PM8901_MPP_DIG 1
-#define PM8901_MPP_L5 2
-#define PM8901_MPP_S4 3
-#define PM8901_MPP_VPH 4
-
-/* Digital Input/Output: level [PM8921] */
-#define PM8921_MPP_S4 1
-#define PM8921_MPP_L15 3
-#define PM8921_MPP_L17 4
-#define PM8921_MPP_VPH 7
-
-/* Digital Input/Output: level [PM8821] */
-#define PM8821_MPP_1P8 0
-#define PM8821_MPP_VPH 7
-
-/* Digital Input/Output: level [PM8018] */
-#define PM8018_MPP_L4 0
-#define PM8018_MPP_L14 1
-#define PM8018_MPP_S3 2
-#define PM8018_MPP_L6 3
-#define PM8018_MPP_L2 4
-#define PM8018_MPP_L5 5
-#define PM8018_MPP_VPH 7
-
-/* Digital Input/Output: level [PM8038] */
-#define PM8038_MPP_L20 0
-#define PM8038_MPP_L11 1
-#define PM8038_MPP_L5 2
-#define PM8038_MPP_L15 3
-#define PM8038_MPP_L17 4
-#define PM8038_MPP_VPH 7
-
-#define PM8841_MPP_VPH 0
-#define PM8841_MPP_S3 2
-
-#define PM8916_MPP_VPH 0
-#define PM8916_MPP_L2 2
-#define PM8916_MPP_L5 3
-
-#define PM8941_MPP_VPH 0
-#define PM8941_MPP_L1 1
-#define PM8941_MPP_S3 2
-#define PM8941_MPP_L6 3
-
-#define PMA8084_MPP_VPH 0
-#define PMA8084_MPP_L1 1
-#define PMA8084_MPP_S4 2
-#define PMA8084_MPP_L6 3
-
-#define PM8994_MPP_VPH 0
-/* Only supported for MPP_05-MPP_08 */
-#define PM8994_MPP_L19 1
-#define PM8994_MPP_S4 2
-#define PM8994_MPP_L12 3
-
-/*
- * Analog Input - Set the source for analog input.
- * To be used with "qcom,amux-route" property
- */
-#define PMIC_MPP_AMUX_ROUTE_CH5 0
-#define PMIC_MPP_AMUX_ROUTE_CH6 1
-#define PMIC_MPP_AMUX_ROUTE_CH7 2
-#define PMIC_MPP_AMUX_ROUTE_CH8 3
-#define PMIC_MPP_AMUX_ROUTE_ABUS1 4
-#define PMIC_MPP_AMUX_ROUTE_ABUS2 5
-#define PMIC_MPP_AMUX_ROUTE_ABUS3 6
-#define PMIC_MPP_AMUX_ROUTE_ABUS4 7
-
-/* Analog Output: level */
-#define PMIC_MPP_AOUT_LVL_1V25 0
-#define PMIC_MPP_AOUT_LVL_1V25_2 1
-#define PMIC_MPP_AOUT_LVL_0V625 2
-#define PMIC_MPP_AOUT_LVL_0V3125 3
-#define PMIC_MPP_AOUT_LVL_MPP 4
-#define PMIC_MPP_AOUT_LVL_ABUS1 5
-#define PMIC_MPP_AOUT_LVL_ABUS2 6
-#define PMIC_MPP_AOUT_LVL_ABUS3 7
-
-/* To be used with "function" */
-#define PMIC_MPP_FUNC_NORMAL "normal"
-#define PMIC_MPP_FUNC_PAIRED "paired"
-#define PMIC_MPP_FUNC_DTEST1 "dtest1"
-#define PMIC_MPP_FUNC_DTEST2 "dtest2"
-#define PMIC_MPP_FUNC_DTEST3 "dtest3"
-#define PMIC_MPP_FUNC_DTEST4 "dtest4"
-
-#endif
diff --git a/include/dt-bindings/power/meson-a1-power.h b/include/dt-bindings/power/meson-a1-power.h
deleted file mode 100644
index 8e39dfc..0000000
--- a/include/dt-bindings/power/meson-a1-power.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2023 SberDevices, Inc.
- * Author: Alexey Romanov <avromanov@sberdevices.ru>
- */
-
-#ifndef _DT_BINDINGS_MESON_A1_POWER_H
-#define _DT_BINDINGS_MESON_A1_POWER_H
-
-#define PWRC_DSPA_ID 8
-#define PWRC_DSPB_ID 9
-#define PWRC_UART_ID 10
-#define PWRC_DMC_ID 11
-#define PWRC_I2C_ID 12
-#define PWRC_PSRAM_ID 13
-#define PWRC_ACODEC_ID 14
-#define PWRC_AUDIO_ID 15
-#define PWRC_OTP_ID 16
-#define PWRC_DMA_ID 17
-#define PWRC_SD_EMMC_ID 18
-#define PWRC_RAMA_ID 19
-#define PWRC_RAMB_ID 20
-#define PWRC_IR_ID 21
-#define PWRC_SPICC_ID 22
-#define PWRC_SPIFC_ID 23
-#define PWRC_USB_ID 24
-#define PWRC_NIC_ID 25
-#define PWRC_PDMIN_ID 26
-#define PWRC_RSA_ID 27
-#define PWRC_MAX_ID 28
-
-#endif
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
deleted file mode 100644
index 7f4e298..0000000
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ /dev/null
@@ -1,412 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
-
-#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
-#define _DT_BINDINGS_POWER_QCOM_RPMPD_H
-
-/* SA8775P Power Domain Indexes */
-#define SA8775P_CX 0
-#define SA8775P_CX_AO 1
-#define SA8775P_DDR 2
-#define SA8775P_EBI 3
-#define SA8775P_GFX 4
-#define SA8775P_LCX 5
-#define SA8775P_LMX 6
-#define SA8775P_MMCX 7
-#define SA8775P_MMCX_AO 8
-#define SA8775P_MSS 9
-#define SA8775P_MX 10
-#define SA8775P_MX_AO 11
-#define SA8775P_MXC 12
-#define SA8775P_MXC_AO 13
-#define SA8775P_NSP0 14
-#define SA8775P_NSP1 15
-#define SA8775P_XO 16
-
-/* SDM670 Power Domain Indexes */
-#define SDM670_MX 0
-#define SDM670_MX_AO 1
-#define SDM670_CX 2
-#define SDM670_CX_AO 3
-#define SDM670_LMX 4
-#define SDM670_LCX 5
-#define SDM670_GFX 6
-#define SDM670_MSS 7
-
-/* SDM845 Power Domain Indexes */
-#define SDM845_EBI 0
-#define SDM845_MX 1
-#define SDM845_MX_AO 2
-#define SDM845_CX 3
-#define SDM845_CX_AO 4
-#define SDM845_LMX 5
-#define SDM845_LCX 6
-#define SDM845_GFX 7
-#define SDM845_MSS 8
-
-/* SDX55 Power Domain Indexes */
-#define SDX55_MSS 0
-#define SDX55_MX 1
-#define SDX55_CX 2
-
-/* SDX65 Power Domain Indexes */
-#define SDX65_MSS 0
-#define SDX65_MX 1
-#define SDX65_MX_AO 2
-#define SDX65_CX 3
-#define SDX65_CX_AO 4
-#define SDX65_MXC 5
-
-/* SM6350 Power Domain Indexes */
-#define SM6350_CX 0
-#define SM6350_GFX 1
-#define SM6350_LCX 2
-#define SM6350_LMX 3
-#define SM6350_MSS 4
-#define SM6350_MX 5
-
-/* SM6350 Power Domain Indexes */
-#define SM6375_VDDCX 0
-#define SM6375_VDDCX_AO 1
-#define SM6375_VDDCX_VFL 2
-#define SM6375_VDDMX 3
-#define SM6375_VDDMX_AO 4
-#define SM6375_VDDMX_VFL 5
-#define SM6375_VDDGX 6
-#define SM6375_VDDGX_AO 7
-#define SM6375_VDD_LPI_CX 8
-#define SM6375_VDD_LPI_MX 9
-
-/* SM8150 Power Domain Indexes */
-#define SM8150_MSS 0
-#define SM8150_EBI 1
-#define SM8150_LMX 2
-#define SM8150_LCX 3
-#define SM8150_GFX 4
-#define SM8150_MX 5
-#define SM8150_MX_AO 6
-#define SM8150_CX 7
-#define SM8150_CX_AO 8
-#define SM8150_MMCX 9
-#define SM8150_MMCX_AO 10
-
-/* SA8155P is a special case, kept for backwards compatibility */
-#define SA8155P_CX SM8150_CX
-#define SA8155P_CX_AO SM8150_CX_AO
-#define SA8155P_EBI SM8150_EBI
-#define SA8155P_GFX SM8150_GFX
-#define SA8155P_MSS SM8150_MSS
-#define SA8155P_MX SM8150_MX
-#define SA8155P_MX_AO SM8150_MX_AO
-
-/* SM8250 Power Domain Indexes */
-#define SM8250_CX 0
-#define SM8250_CX_AO 1
-#define SM8250_EBI 2
-#define SM8250_GFX 3
-#define SM8250_LCX 4
-#define SM8250_LMX 5
-#define SM8250_MMCX 6
-#define SM8250_MMCX_AO 7
-#define SM8250_MX 8
-#define SM8250_MX_AO 9
-
-/* SM8350 Power Domain Indexes */
-#define SM8350_CX 0
-#define SM8350_CX_AO 1
-#define SM8350_EBI 2
-#define SM8350_GFX 3
-#define SM8350_LCX 4
-#define SM8350_LMX 5
-#define SM8350_MMCX 6
-#define SM8350_MMCX_AO 7
-#define SM8350_MX 8
-#define SM8350_MX_AO 9
-#define SM8350_MXC 10
-#define SM8350_MXC_AO 11
-#define SM8350_MSS 12
-
-/* SM8450 Power Domain Indexes */
-#define SM8450_CX 0
-#define SM8450_CX_AO 1
-#define SM8450_EBI 2
-#define SM8450_GFX 3
-#define SM8450_LCX 4
-#define SM8450_LMX 5
-#define SM8450_MMCX 6
-#define SM8450_MMCX_AO 7
-#define SM8450_MX 8
-#define SM8450_MX_AO 9
-#define SM8450_MXC 10
-#define SM8450_MXC_AO 11
-#define SM8450_MSS 12
-
-/* SM8550 Power Domain Indexes */
-#define SM8550_CX 0
-#define SM8550_CX_AO 1
-#define SM8550_EBI 2
-#define SM8550_GFX 3
-#define SM8550_LCX 4
-#define SM8550_LMX 5
-#define SM8550_MMCX 6
-#define SM8550_MMCX_AO 7
-#define SM8550_MX 8
-#define SM8550_MX_AO 9
-#define SM8550_MXC 10
-#define SM8550_MXC_AO 11
-#define SM8550_MSS 12
-#define SM8550_NSP 13
-
-/* QDU1000/QRU1000 Power Domain Indexes */
-#define QDU1000_EBI 0
-#define QDU1000_MSS 1
-#define QDU1000_CX 2
-#define QDU1000_MX 3
-
-/* SC7180 Power Domain Indexes */
-#define SC7180_CX 0
-#define SC7180_CX_AO 1
-#define SC7180_GFX 2
-#define SC7180_MX 3
-#define SC7180_MX_AO 4
-#define SC7180_LMX 5
-#define SC7180_LCX 6
-#define SC7180_MSS 7
-
-/* SC7280 Power Domain Indexes */
-#define SC7280_CX 0
-#define SC7280_CX_AO 1
-#define SC7280_EBI 2
-#define SC7280_GFX 3
-#define SC7280_MX 4
-#define SC7280_MX_AO 5
-#define SC7280_LMX 6
-#define SC7280_LCX 7
-#define SC7280_MSS 8
-
-/* SC8180X Power Domain Indexes */
-#define SC8180X_CX 0
-#define SC8180X_CX_AO 1
-#define SC8180X_EBI 2
-#define SC8180X_GFX 3
-#define SC8180X_LCX 4
-#define SC8180X_LMX 5
-#define SC8180X_MMCX 6
-#define SC8180X_MMCX_AO 7
-#define SC8180X_MSS 8
-#define SC8180X_MX 9
-#define SC8180X_MX_AO 10
-
-/* SC8280XP Power Domain Indexes */
-#define SC8280XP_CX 0
-#define SC8280XP_CX_AO 1
-#define SC8280XP_DDR 2
-#define SC8280XP_EBI 3
-#define SC8280XP_GFX 4
-#define SC8280XP_LCX 5
-#define SC8280XP_LMX 6
-#define SC8280XP_MMCX 7
-#define SC8280XP_MMCX_AO 8
-#define SC8280XP_MSS 9
-#define SC8280XP_MX 10
-#define SC8280XP_MXC 12
-#define SC8280XP_MX_AO 11
-#define SC8280XP_NSP 13
-#define SC8280XP_QPHY 14
-#define SC8280XP_XO 15
-
-/* SDM845 Power Domain performance levels */
-#define RPMH_REGULATOR_LEVEL_RETENTION 16
-#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_D2 52
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_D0 60
-#define RPMH_REGULATOR_LEVEL_LOW_SVS 64
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_P1 72
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
-#define RPMH_REGULATOR_LEVEL_LOW_SVS_L2 96
-#define RPMH_REGULATOR_LEVEL_SVS 128
-#define RPMH_REGULATOR_LEVEL_SVS_L0 144
-#define RPMH_REGULATOR_LEVEL_SVS_L1 192
-#define RPMH_REGULATOR_LEVEL_SVS_L2 224
-#define RPMH_REGULATOR_LEVEL_NOM 256
-#define RPMH_REGULATOR_LEVEL_NOM_L0 288
-#define RPMH_REGULATOR_LEVEL_NOM_L1 320
-#define RPMH_REGULATOR_LEVEL_NOM_L2 336
-#define RPMH_REGULATOR_LEVEL_TURBO 384
-#define RPMH_REGULATOR_LEVEL_TURBO_L0 400
-#define RPMH_REGULATOR_LEVEL_TURBO_L1 416
-#define RPMH_REGULATOR_LEVEL_TURBO_L2 432
-#define RPMH_REGULATOR_LEVEL_TURBO_L3 448
-#define RPMH_REGULATOR_LEVEL_SUPER_TURBO 464
-#define RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR 480
-
-/* MDM9607 Power Domains */
-#define MDM9607_VDDCX 0
-#define MDM9607_VDDCX_AO 1
-#define MDM9607_VDDCX_VFL 2
-#define MDM9607_VDDMX 3
-#define MDM9607_VDDMX_AO 4
-#define MDM9607_VDDMX_VFL 5
-
-/* MSM8226 Power Domain Indexes */
-#define MSM8226_VDDCX 0
-#define MSM8226_VDDCX_AO 1
-#define MSM8226_VDDCX_VFC 2
-
-/* MSM8939 Power Domains */
-#define MSM8939_VDDMDCX 0
-#define MSM8939_VDDMDCX_AO 1
-#define MSM8939_VDDMDCX_VFC 2
-#define MSM8939_VDDCX 3
-#define MSM8939_VDDCX_AO 4
-#define MSM8939_VDDCX_VFC 5
-#define MSM8939_VDDMX 6
-#define MSM8939_VDDMX_AO 7
-
-/* MSM8916 Power Domain Indexes */
-#define MSM8916_VDDCX 0
-#define MSM8916_VDDCX_AO 1
-#define MSM8916_VDDCX_VFC 2
-#define MSM8916_VDDMX 3
-#define MSM8916_VDDMX_AO 4
-
-/* MSM8909 Power Domain Indexes */
-#define MSM8909_VDDCX MSM8916_VDDCX
-#define MSM8909_VDDCX_AO MSM8916_VDDCX_AO
-#define MSM8909_VDDCX_VFC MSM8916_VDDCX_VFC
-#define MSM8909_VDDMX MSM8916_VDDMX
-#define MSM8909_VDDMX_AO MSM8916_VDDMX_AO
-
-/* MSM8917 Power Domain Indexes */
-#define MSM8917_VDDCX 0
-#define MSM8917_VDDCX_AO 1
-#define MSM8917_VDDCX_VFL 2
-#define MSM8917_VDDMX 3
-#define MSM8917_VDDMX_AO 4
-
-/* MSM8937 Power Domain Indexes */
-#define MSM8937_VDDCX MSM8917_VDDCX
-#define MSM8937_VDDCX_AO MSM8917_VDDCX_AO
-#define MSM8937_VDDCX_VFL MSM8917_VDDCX_VFL
-#define MSM8937_VDDMX MSM8917_VDDMX
-#define MSM8937_VDDMX_AO MSM8917_VDDMX_AO
-
-/* QM215 Power Domain Indexes */
-#define QM215_VDDCX MSM8917_VDDCX
-#define QM215_VDDCX_AO MSM8917_VDDCX_AO
-#define QM215_VDDCX_VFL MSM8917_VDDCX_VFL
-#define QM215_VDDMX MSM8917_VDDMX
-#define QM215_VDDMX_AO MSM8917_VDDMX_AO
-
-/* MSM8953 Power Domain Indexes */
-#define MSM8953_VDDMD 0
-#define MSM8953_VDDMD_AO 1
-#define MSM8953_VDDCX 2
-#define MSM8953_VDDCX_AO 3
-#define MSM8953_VDDCX_VFL 4
-#define MSM8953_VDDMX 5
-#define MSM8953_VDDMX_AO 6
-
-/* MSM8976 Power Domain Indexes */
-#define MSM8976_VDDCX 0
-#define MSM8976_VDDCX_AO 1
-#define MSM8976_VDDCX_VFL 2
-#define MSM8976_VDDMX 3
-#define MSM8976_VDDMX_AO 4
-#define MSM8976_VDDMX_VFL 5
-
-/* MSM8994 Power Domain Indexes */
-#define MSM8994_VDDCX 0
-#define MSM8994_VDDCX_AO 1
-#define MSM8994_VDDCX_VFC 2
-#define MSM8994_VDDMX 3
-#define MSM8994_VDDMX_AO 4
-#define MSM8994_VDDGFX 5
-#define MSM8994_VDDGFX_VFC 6
-
-/* MSM8996 Power Domain Indexes */
-#define MSM8996_VDDCX 0
-#define MSM8996_VDDCX_AO 1
-#define MSM8996_VDDCX_VFC 2
-#define MSM8996_VDDMX 3
-#define MSM8996_VDDMX_AO 4
-#define MSM8996_VDDSSCX 5
-#define MSM8996_VDDSSCX_VFC 6
-
-/* MSM8998 Power Domain Indexes */
-#define MSM8998_VDDCX 0
-#define MSM8998_VDDCX_AO 1
-#define MSM8998_VDDCX_VFL 2
-#define MSM8998_VDDMX 3
-#define MSM8998_VDDMX_AO 4
-#define MSM8998_VDDMX_VFL 5
-#define MSM8998_SSCCX 6
-#define MSM8998_SSCCX_VFL 7
-#define MSM8998_SSCMX 8
-#define MSM8998_SSCMX_VFL 9
-
-/* QCS404 Power Domains */
-#define QCS404_VDDMX 0
-#define QCS404_VDDMX_AO 1
-#define QCS404_VDDMX_VFL 2
-#define QCS404_LPICX 3
-#define QCS404_LPICX_VFL 4
-#define QCS404_LPIMX 5
-#define QCS404_LPIMX_VFL 6
-
-/* SDM660 Power Domains */
-#define SDM660_VDDCX 0
-#define SDM660_VDDCX_AO 1
-#define SDM660_VDDCX_VFL 2
-#define SDM660_VDDMX 3
-#define SDM660_VDDMX_AO 4
-#define SDM660_VDDMX_VFL 5
-#define SDM660_SSCCX 6
-#define SDM660_SSCCX_VFL 7
-#define SDM660_SSCMX 8
-#define SDM660_SSCMX_VFL 9
-
-/* SM6115 Power Domains */
-#define SM6115_VDDCX 0
-#define SM6115_VDDCX_AO 1
-#define SM6115_VDDCX_VFL 2
-#define SM6115_VDDMX 3
-#define SM6115_VDDMX_AO 4
-#define SM6115_VDDMX_VFL 5
-#define SM6115_VDD_LPI_CX 6
-#define SM6115_VDD_LPI_MX 7
-
-/* SM6125 Power Domains */
-#define SM6125_VDDCX 0
-#define SM6125_VDDCX_AO 1
-#define SM6125_VDDCX_VFL 2
-#define SM6125_VDDMX 3
-#define SM6125_VDDMX_AO 4
-#define SM6125_VDDMX_VFL 5
-
-/* QCM2290 Power Domains */
-#define QCM2290_VDDCX 0
-#define QCM2290_VDDCX_AO 1
-#define QCM2290_VDDCX_VFL 2
-#define QCM2290_VDDMX 3
-#define QCM2290_VDDMX_AO 4
-#define QCM2290_VDDMX_VFL 5
-#define QCM2290_VDD_LPI_CX 6
-#define QCM2290_VDD_LPI_MX 7
-
-/* RPM SMD Power Domain performance levels */
-#define RPM_SMD_LEVEL_RETENTION 16
-#define RPM_SMD_LEVEL_RETENTION_PLUS 32
-#define RPM_SMD_LEVEL_MIN_SVS 48
-#define RPM_SMD_LEVEL_LOW_SVS 64
-#define RPM_SMD_LEVEL_SVS 128
-#define RPM_SMD_LEVEL_SVS_PLUS 192
-#define RPM_SMD_LEVEL_NOM 256
-#define RPM_SMD_LEVEL_NOM_PLUS 320
-#define RPM_SMD_LEVEL_TURBO 384
-#define RPM_SMD_LEVEL_TURBO_NO_CPR 416
-#define RPM_SMD_LEVEL_TURBO_HIGH 448
-#define RPM_SMD_LEVEL_BINNING 512
-
-#endif
diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
deleted file mode 100644
index 86713dc..0000000
--- a/include/dt-bindings/regulator/qcom,rpmh-regulator.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
-
-#ifndef __QCOM_RPMH_REGULATOR_H
-#define __QCOM_RPMH_REGULATOR_H
-
-/*
- * These mode constants may be used to specify modes for various RPMh regulator
- * device tree properties (e.g. regulator-initial-mode). Each type of regulator
- * supports a subset of the possible modes.
- *
- * %RPMH_REGULATOR_MODE_RET: Retention mode in which only an extremely small
- * load current is allowed. This mode is supported
- * by LDO and SMPS type regulators.
- * %RPMH_REGULATOR_MODE_LPM: Low power mode in which a small load current is
- * allowed. This mode corresponds to PFM for SMPS
- * and BOB type regulators. This mode is supported
- * by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type
- * regulators.
- * %RPMH_REGULATOR_MODE_AUTO: Auto mode in which the regulator hardware
- * automatically switches between LPM and HPM based
- * upon the real-time load current. This mode is
- * supported by HFSMPS, BOB, and PMIC4 FTSMPS type
- * regulators.
- * %RPMH_REGULATOR_MODE_HPM: High power mode in which the full rated current
- * of the regulator is allowed. This mode
- * corresponds to PWM for SMPS and BOB type
- * regulators. This mode is supported by all types
- * of regulators.
- */
-#define RPMH_REGULATOR_MODE_RET 0
-#define RPMH_REGULATOR_MODE_LPM 1
-#define RPMH_REGULATOR_MODE_AUTO 2
-#define RPMH_REGULATOR_MODE_HPM 3
-
-#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-a1-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-reset.h
deleted file mode 100644
index 2c749c6..0000000
--- a/include/dt-bindings/reset/amlogic,meson-a1-reset.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
- * Author: Xingyu Chen <xingyu.chen@amlogic.com>
- *
- * Copyright (c) 2023, SberDevices, Inc.
- * Author: Alexey Romanov <avromanov@salutedevices.com>
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H
-
-/* RESET0 */
-/* 0 */
-#define RESET_AM2AXI_VAD 1
-/* 2-3 */
-#define RESET_PSRAM 4
-#define RESET_PAD_CTRL 5
-/* 6 */
-#define RESET_TEMP_SENSOR 7
-#define RESET_AM2AXI_DEV 8
-/* 9 */
-#define RESET_SPICC_A 10
-#define RESET_MSR_CLK 11
-#define RESET_AUDIO 12
-#define RESET_ANALOG_CTRL 13
-#define RESET_SAR_ADC 14
-#define RESET_AUDIO_VAD 15
-#define RESET_CEC 16
-#define RESET_PWM_EF 17
-#define RESET_PWM_CD 18
-#define RESET_PWM_AB 19
-/* 20 */
-#define RESET_IR_CTRL 21
-#define RESET_I2C_S_A 22
-/* 23 */
-#define RESET_I2C_M_D 24
-#define RESET_I2C_M_C 25
-#define RESET_I2C_M_B 26
-#define RESET_I2C_M_A 27
-#define RESET_I2C_PROD_AHB 28
-#define RESET_I2C_PROD 29
-/* 30-31 */
-
-/* RESET1 */
-#define RESET_ACODEC 32
-#define RESET_DMA 33
-#define RESET_SD_EMMC_A 34
-/* 35 */
-#define RESET_USBCTRL 36
-/* 37 */
-#define RESET_USBPHY 38
-/* 39-41 */
-#define RESET_RSA 42
-#define RESET_DMC 43
-/* 44 */
-#define RESET_IRQ_CTRL 45
-/* 46 */
-#define RESET_NIC_VAD 47
-#define RESET_NIC_AXI 48
-#define RESET_RAMA 49
-#define RESET_RAMB 50
-/* 51-52 */
-#define RESET_ROM 53
-#define RESET_SPIFC 54
-#define RESET_GIC 55
-#define RESET_UART_C 56
-#define RESET_UART_B 57
-#define RESET_UART_A 58
-#define RESET_OSC_RING 59
-/* 60-63 */
-
-/* RESET2 */
-/* 64-95 */
-
-#endif
diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h b/include/dt-bindings/reset/qcom,gcc-msm8916.h
deleted file mode 100644
index 1f9be10..0000000
--- a/include/dt-bindings/reset/qcom,gcc-msm8916.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2015 Linaro Limited
- */
-
-#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H
-#define _DT_BINDINGS_RESET_MSM_GCC_8916_H
-
-#define GCC_BLSP1_BCR 0
-#define GCC_BLSP1_QUP1_BCR 1
-#define GCC_BLSP1_UART1_BCR 2
-#define GCC_BLSP1_QUP2_BCR 3
-#define GCC_BLSP1_UART2_BCR 4
-#define GCC_BLSP1_QUP3_BCR 5
-#define GCC_BLSP1_QUP4_BCR 6
-#define GCC_BLSP1_QUP5_BCR 7
-#define GCC_BLSP1_QUP6_BCR 8
-#define GCC_IMEM_BCR 9
-#define GCC_SMMU_BCR 10
-#define GCC_APSS_TCU_BCR 11
-#define GCC_SMMU_XPU_BCR 12
-#define GCC_PCNOC_TBU_BCR 13
-#define GCC_PRNG_BCR 14
-#define GCC_BOOT_ROM_BCR 15
-#define GCC_CRYPTO_BCR 16
-#define GCC_SEC_CTRL_BCR 17
-#define GCC_AUDIO_CORE_BCR 18
-#define GCC_ULT_AUDIO_BCR 19
-#define GCC_DEHR_BCR 20
-#define GCC_SYSTEM_NOC_BCR 21
-#define GCC_PCNOC_BCR 22
-#define GCC_TCSR_BCR 23
-#define GCC_QDSS_BCR 24
-#define GCC_DCD_BCR 25
-#define GCC_MSG_RAM_BCR 26
-#define GCC_MPM_BCR 27
-#define GCC_SPMI_BCR 28
-#define GCC_SPDM_BCR 29
-#define GCC_MM_SPDM_BCR 30
-#define GCC_BIMC_BCR 31
-#define GCC_RBCPR_BCR 32
-#define GCC_TLMM_BCR 33
-#define GCC_USB_HS_BCR 34
-#define GCC_USB2A_PHY_BCR 35
-#define GCC_SDCC1_BCR 36
-#define GCC_SDCC2_BCR 37
-#define GCC_PDM_BCR 38
-#define GCC_SNOC_BUS_TIMEOUT0_BCR 39
-#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40
-#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41
-#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42
-#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43
-#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44
-#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45
-#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46
-#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47
-#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48
-#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49
-#define GCC_MMSS_BCR 50
-#define GCC_VENUS0_BCR 51
-#define GCC_MDSS_BCR 52
-#define GCC_CAMSS_PHY0_BCR 53
-#define GCC_CAMSS_CSI0_BCR 54
-#define GCC_CAMSS_CSI0PHY_BCR 55
-#define GCC_CAMSS_CSI0RDI_BCR 56
-#define GCC_CAMSS_CSI0PIX_BCR 57
-#define GCC_CAMSS_PHY1_BCR 58
-#define GCC_CAMSS_CSI1_BCR 59
-#define GCC_CAMSS_CSI1PHY_BCR 60
-#define GCC_CAMSS_CSI1RDI_BCR 61
-#define GCC_CAMSS_CSI1PIX_BCR 62
-#define GCC_CAMSS_ISPIF_BCR 63
-#define GCC_CAMSS_CCI_BCR 64
-#define GCC_CAMSS_MCLK0_BCR 65
-#define GCC_CAMSS_MCLK1_BCR 66
-#define GCC_CAMSS_GP0_BCR 67
-#define GCC_CAMSS_GP1_BCR 68
-#define GCC_CAMSS_TOP_BCR 69
-#define GCC_CAMSS_MICRO_BCR 70
-#define GCC_CAMSS_JPEG_BCR 71
-#define GCC_CAMSS_VFE_BCR 72
-#define GCC_CAMSS_CSI_VFE0_BCR 73
-#define GCC_OXILI_BCR 74
-#define GCC_GMEM_BCR 75
-#define GCC_CAMSS_AHB_BCR 76
-#define GCC_MDP_TBU_BCR 77
-#define GCC_GFX_TBU_BCR 78
-#define GCC_GFX_TCU_BCR 79
-#define GCC_MSS_TBU_AXI_BCR 80
-#define GCC_MSS_TBU_GSS_AXI_BCR 81
-#define GCC_MSS_TBU_Q6_AXI_BCR 82
-#define GCC_GTCU_AHB_BCR 83
-#define GCC_SMMU_CFG_BCR 84
-#define GCC_VFE_TBU_BCR 85
-#define GCC_VENUS_TBU_BCR 86
-#define GCC_JPEG_TBU_BCR 87
-#define GCC_PRONTO_TBU_BCR 88
-#define GCC_SMMU_CATS_BCR 89
-
-#endif
diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
deleted file mode 100644
index 476c5fc..0000000
--- a/include/dt-bindings/reset/qcom,sdm845-aoss.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2018 The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
-#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
-
-#define AOSS_CC_MSS_RESTART 0
-#define AOSS_CC_CAMSS_RESTART 1
-#define AOSS_CC_VENUS_RESTART 2
-#define AOSS_CC_GPU_RESTART 3
-#define AOSS_CC_DISPSS_RESTART 4
-#define AOSS_CC_WCSS_RESTART 5
-#define AOSS_CC_LPASS_RESTART 6
-
-#endif
diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
deleted file mode 100644
index 03a0c0e..0000000
--- a/include/dt-bindings/reset/qcom,sdm845-pdc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2018 The Linux Foundation. All rights reserved.
- */
-
-#ifndef _DT_BINDINGS_RESET_PDC_SDM_845_H
-#define _DT_BINDINGS_RESET_PDC_SDM_845_H
-
-#define PDC_APPS_SYNC_RESET 0
-#define PDC_SP_SYNC_RESET 1
-#define PDC_AUDIO_SYNC_RESET 2
-#define PDC_SENSORS_SYNC_RESET 3
-#define PDC_AOP_SYNC_RESET 4
-#define PDC_DEBUG_SYNC_RESET 5
-#define PDC_GPU_SYNC_RESET 6
-#define PDC_DISPLAY_SYNC_RESET 7
-#define PDC_COMPUTE_SYNC_RESET 8
-#define PDC_MODEM_SYNC_RESET 9
-#define PDC_WLAN_RF_SYNC_RESET 10
-#define PDC_WPSS_SYNC_RESET 11
-
-#endif
diff --git a/include/dt-bindings/soc/qcom,apr.h b/include/dt-bindings/soc/qcom,apr.h
deleted file mode 100644
index 0063624..0000000
--- a/include/dt-bindings/soc/qcom,apr.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_BINDINGS_QCOM_APR_H
-#define __DT_BINDINGS_QCOM_APR_H
-
-/* Domain IDs */
-#define APR_DOMAIN_SIM 0x1
-#define APR_DOMAIN_PC 0x2
-#define APR_DOMAIN_MODEM 0x3
-#define APR_DOMAIN_ADSP 0x4
-#define APR_DOMAIN_APPS 0x5
-#define APR_DOMAIN_MAX 0x6
-
-/* ADSP service IDs */
-#define APR_SVC_ADSP_CORE 0x3
-#define APR_SVC_AFE 0x4
-#define APR_SVC_VSM 0x5
-#define APR_SVC_VPM 0x6
-#define APR_SVC_ASM 0x7
-#define APR_SVC_ADM 0x8
-#define APR_SVC_ADSP_MVM 0x09
-#define APR_SVC_ADSP_CVS 0x0A
-#define APR_SVC_ADSP_CVP 0x0B
-#define APR_SVC_USM 0x0C
-#define APR_SVC_LSM 0x0D
-#define APR_SVC_VIDC 0x16
-#define APR_SVC_MAX 0x17
-
-#endif /* __DT_BINDINGS_QCOM_APR_H */
diff --git a/include/dt-bindings/soc/qcom,rpmh-rsc.h b/include/dt-bindings/soc/qcom,rpmh-rsc.h
deleted file mode 100644
index 868f998..0000000
--- a/include/dt-bindings/soc/qcom,rpmh-rsc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
- */
-
-#ifndef __DT_QCOM_RPMH_RSC_H__
-#define __DT_QCOM_RPMH_RSC_H__
-
-#define SLEEP_TCS 0
-#define WAKE_TCS 1
-#define ACTIVE_TCS 2
-#define CONTROL_TCS 3
-
-#endif /* __DT_QCOM_RPMH_RSC_H__ */
diff --git a/include/dt-bindings/sound/qcom,lpass.h b/include/dt-bindings/sound/qcom,lpass.h
deleted file mode 100644
index a9404c3..0000000
--- a/include/dt-bindings/sound/qcom,lpass.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_QCOM_LPASS_H
-#define __DT_QCOM_LPASS_H
-
-#define MI2S_PRIMARY 0
-#define MI2S_SECONDARY 1
-#define MI2S_TERTIARY 2
-#define MI2S_QUATERNARY 3
-#define MI2S_QUINARY 4
-
-#define LPASS_DP_RX 5
-
-#define LPASS_CDC_DMA_RX0 6
-#define LPASS_CDC_DMA_RX1 7
-#define LPASS_CDC_DMA_RX2 8
-#define LPASS_CDC_DMA_RX3 9
-#define LPASS_CDC_DMA_RX4 10
-#define LPASS_CDC_DMA_RX5 11
-#define LPASS_CDC_DMA_RX6 12
-#define LPASS_CDC_DMA_RX7 13
-#define LPASS_CDC_DMA_RX8 14
-#define LPASS_CDC_DMA_RX9 15
-
-#define LPASS_CDC_DMA_TX0 16
-#define LPASS_CDC_DMA_TX1 17
-#define LPASS_CDC_DMA_TX2 18
-#define LPASS_CDC_DMA_TX3 19
-#define LPASS_CDC_DMA_TX4 20
-#define LPASS_CDC_DMA_TX5 21
-#define LPASS_CDC_DMA_TX6 22
-#define LPASS_CDC_DMA_TX7 23
-#define LPASS_CDC_DMA_TX8 24
-
-#define LPASS_CDC_DMA_VA_TX0 25
-#define LPASS_CDC_DMA_VA_TX1 26
-#define LPASS_CDC_DMA_VA_TX2 27
-#define LPASS_CDC_DMA_VA_TX3 28
-#define LPASS_CDC_DMA_VA_TX4 29
-#define LPASS_CDC_DMA_VA_TX5 30
-#define LPASS_CDC_DMA_VA_TX6 31
-#define LPASS_CDC_DMA_VA_TX7 32
-#define LPASS_CDC_DMA_VA_TX8 33
-
-#define LPASS_MCLK0 0
-
-#endif /* __DT_QCOM_LPASS_H */
diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h
deleted file mode 100644
index 9d5d89c..0000000
--- a/include/dt-bindings/sound/qcom,q6afe.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_BINDINGS_Q6_AFE_H__
-#define __DT_BINDINGS_Q6_AFE_H__
-
-/* This file exists due to backward compatibility reasons, Please do not DELETE! */
-
-#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
-
-#endif /* __DT_BINDINGS_Q6_AFE_H__ */
diff --git a/include/dt-bindings/sound/qcom,q6asm.h b/include/dt-bindings/sound/qcom,q6asm.h
deleted file mode 100644
index f59d74f..0000000
--- a/include/dt-bindings/sound/qcom,q6asm.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_BINDINGS_Q6_ASM_H__
-#define __DT_BINDINGS_Q6_ASM_H__
-
-#define MSM_FRONTEND_DAI_MULTIMEDIA1 0
-#define MSM_FRONTEND_DAI_MULTIMEDIA2 1
-#define MSM_FRONTEND_DAI_MULTIMEDIA3 2
-#define MSM_FRONTEND_DAI_MULTIMEDIA4 3
-#define MSM_FRONTEND_DAI_MULTIMEDIA5 4
-#define MSM_FRONTEND_DAI_MULTIMEDIA6 5
-#define MSM_FRONTEND_DAI_MULTIMEDIA7 6
-#define MSM_FRONTEND_DAI_MULTIMEDIA8 7
-#define MSM_FRONTEND_DAI_MULTIMEDIA9 8
-#define MSM_FRONTEND_DAI_MULTIMEDIA10 9
-#define MSM_FRONTEND_DAI_MULTIMEDIA11 10
-#define MSM_FRONTEND_DAI_MULTIMEDIA12 11
-#define MSM_FRONTEND_DAI_MULTIMEDIA13 12
-#define MSM_FRONTEND_DAI_MULTIMEDIA14 13
-#define MSM_FRONTEND_DAI_MULTIMEDIA15 14
-#define MSM_FRONTEND_DAI_MULTIMEDIA16 15
-
-#define Q6ASM_DAI_TX_RX 0
-#define Q6ASM_DAI_TX 1
-#define Q6ASM_DAI_RX 2
-
-#endif /* __DT_BINDINGS_Q6_ASM_H__ */
diff --git a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
deleted file mode 100644
index 39f2032..0000000
--- a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_BINDINGS_Q6_AUDIO_PORTS_H__
-#define __DT_BINDINGS_Q6_AUDIO_PORTS_H__
-
-/* LPASS Audio virtual ports IDs */
-#define HDMI_RX 1
-#define SLIMBUS_0_RX 2
-#define SLIMBUS_0_TX 3
-#define SLIMBUS_1_RX 4
-#define SLIMBUS_1_TX 5
-#define SLIMBUS_2_RX 6
-#define SLIMBUS_2_TX 7
-#define SLIMBUS_3_RX 8
-#define SLIMBUS_3_TX 9
-#define SLIMBUS_4_RX 10
-#define SLIMBUS_4_TX 11
-#define SLIMBUS_5_RX 12
-#define SLIMBUS_5_TX 13
-#define SLIMBUS_6_RX 14
-#define SLIMBUS_6_TX 15
-#define PRIMARY_MI2S_RX 16
-#define PRIMARY_MI2S_TX 17
-#define SECONDARY_MI2S_RX 18
-#define SECONDARY_MI2S_TX 19
-#define TERTIARY_MI2S_RX 20
-#define TERTIARY_MI2S_TX 21
-#define QUATERNARY_MI2S_RX 22
-#define QUATERNARY_MI2S_TX 23
-#define PRIMARY_TDM_RX_0 24
-#define PRIMARY_TDM_TX_0 25
-#define PRIMARY_TDM_RX_1 26
-#define PRIMARY_TDM_TX_1 27
-#define PRIMARY_TDM_RX_2 28
-#define PRIMARY_TDM_TX_2 29
-#define PRIMARY_TDM_RX_3 30
-#define PRIMARY_TDM_TX_3 31
-#define PRIMARY_TDM_RX_4 32
-#define PRIMARY_TDM_TX_4 33
-#define PRIMARY_TDM_RX_5 34
-#define PRIMARY_TDM_TX_5 35
-#define PRIMARY_TDM_RX_6 36
-#define PRIMARY_TDM_TX_6 37
-#define PRIMARY_TDM_RX_7 38
-#define PRIMARY_TDM_TX_7 39
-#define SECONDARY_TDM_RX_0 40
-#define SECONDARY_TDM_TX_0 41
-#define SECONDARY_TDM_RX_1 42
-#define SECONDARY_TDM_TX_1 43
-#define SECONDARY_TDM_RX_2 44
-#define SECONDARY_TDM_TX_2 45
-#define SECONDARY_TDM_RX_3 46
-#define SECONDARY_TDM_TX_3 47
-#define SECONDARY_TDM_RX_4 48
-#define SECONDARY_TDM_TX_4 49
-#define SECONDARY_TDM_RX_5 50
-#define SECONDARY_TDM_TX_5 51
-#define SECONDARY_TDM_RX_6 52
-#define SECONDARY_TDM_TX_6 53
-#define SECONDARY_TDM_RX_7 54
-#define SECONDARY_TDM_TX_7 55
-#define TERTIARY_TDM_RX_0 56
-#define TERTIARY_TDM_TX_0 57
-#define TERTIARY_TDM_RX_1 58
-#define TERTIARY_TDM_TX_1 59
-#define TERTIARY_TDM_RX_2 60
-#define TERTIARY_TDM_TX_2 61
-#define TERTIARY_TDM_RX_3 62
-#define TERTIARY_TDM_TX_3 63
-#define TERTIARY_TDM_RX_4 64
-#define TERTIARY_TDM_TX_4 65
-#define TERTIARY_TDM_RX_5 66
-#define TERTIARY_TDM_TX_5 67
-#define TERTIARY_TDM_RX_6 68
-#define TERTIARY_TDM_TX_6 69
-#define TERTIARY_TDM_RX_7 70
-#define TERTIARY_TDM_TX_7 71
-#define QUATERNARY_TDM_RX_0 72
-#define QUATERNARY_TDM_TX_0 73
-#define QUATERNARY_TDM_RX_1 74
-#define QUATERNARY_TDM_TX_1 75
-#define QUATERNARY_TDM_RX_2 76
-#define QUATERNARY_TDM_TX_2 77
-#define QUATERNARY_TDM_RX_3 78
-#define QUATERNARY_TDM_TX_3 79
-#define QUATERNARY_TDM_RX_4 80
-#define QUATERNARY_TDM_TX_4 81
-#define QUATERNARY_TDM_RX_5 82
-#define QUATERNARY_TDM_TX_5 83
-#define QUATERNARY_TDM_RX_6 84
-#define QUATERNARY_TDM_TX_6 85
-#define QUATERNARY_TDM_RX_7 86
-#define QUATERNARY_TDM_TX_7 87
-#define QUINARY_TDM_RX_0 88
-#define QUINARY_TDM_TX_0 89
-#define QUINARY_TDM_RX_1 90
-#define QUINARY_TDM_TX_1 91
-#define QUINARY_TDM_RX_2 92
-#define QUINARY_TDM_TX_2 93
-#define QUINARY_TDM_RX_3 94
-#define QUINARY_TDM_TX_3 95
-#define QUINARY_TDM_RX_4 96
-#define QUINARY_TDM_TX_4 97
-#define QUINARY_TDM_RX_5 98
-#define QUINARY_TDM_TX_5 99
-#define QUINARY_TDM_RX_6 100
-#define QUINARY_TDM_TX_6 101
-#define QUINARY_TDM_RX_7 102
-#define QUINARY_TDM_TX_7 103
-#define DISPLAY_PORT_RX 104
-#define WSA_CODEC_DMA_RX_0 105
-#define WSA_CODEC_DMA_TX_0 106
-#define WSA_CODEC_DMA_RX_1 107
-#define WSA_CODEC_DMA_TX_1 108
-#define WSA_CODEC_DMA_TX_2 109
-#define VA_CODEC_DMA_TX_0 110
-#define VA_CODEC_DMA_TX_1 111
-#define VA_CODEC_DMA_TX_2 112
-#define RX_CODEC_DMA_RX_0 113
-#define TX_CODEC_DMA_TX_0 114
-#define RX_CODEC_DMA_RX_1 115
-#define TX_CODEC_DMA_TX_1 116
-#define RX_CODEC_DMA_RX_2 117
-#define TX_CODEC_DMA_TX_2 118
-#define RX_CODEC_DMA_RX_3 119
-#define TX_CODEC_DMA_TX_3 120
-#define RX_CODEC_DMA_RX_4 121
-#define TX_CODEC_DMA_TX_4 122
-#define RX_CODEC_DMA_RX_5 123
-#define TX_CODEC_DMA_TX_5 124
-#define RX_CODEC_DMA_RX_6 125
-#define RX_CODEC_DMA_RX_7 126
-#define QUINARY_MI2S_RX 127
-#define QUINARY_MI2S_TX 128
-#define DISPLAY_PORT_RX_0 DISPLAY_PORT_RX
-#define DISPLAY_PORT_RX_1 129
-#define DISPLAY_PORT_RX_2 130
-#define DISPLAY_PORT_RX_3 131
-#define DISPLAY_PORT_RX_4 132
-#define DISPLAY_PORT_RX_5 133
-#define DISPLAY_PORT_RX_6 134
-#define DISPLAY_PORT_RX_7 135
-
-#define LPASS_CLK_ID_PRI_MI2S_IBIT 1
-#define LPASS_CLK_ID_PRI_MI2S_EBIT 2
-#define LPASS_CLK_ID_SEC_MI2S_IBIT 3
-#define LPASS_CLK_ID_SEC_MI2S_EBIT 4
-#define LPASS_CLK_ID_TER_MI2S_IBIT 5
-#define LPASS_CLK_ID_TER_MI2S_EBIT 6
-#define LPASS_CLK_ID_QUAD_MI2S_IBIT 7
-#define LPASS_CLK_ID_QUAD_MI2S_EBIT 8
-#define LPASS_CLK_ID_SPEAKER_I2S_IBIT 9
-#define LPASS_CLK_ID_SPEAKER_I2S_EBIT 10
-#define LPASS_CLK_ID_SPEAKER_I2S_OSR 11
-#define LPASS_CLK_ID_QUI_MI2S_IBIT 12
-#define LPASS_CLK_ID_QUI_MI2S_EBIT 13
-#define LPASS_CLK_ID_SEN_MI2S_IBIT 14
-#define LPASS_CLK_ID_SEN_MI2S_EBIT 15
-#define LPASS_CLK_ID_INT0_MI2S_IBIT 16
-#define LPASS_CLK_ID_INT1_MI2S_IBIT 17
-#define LPASS_CLK_ID_INT2_MI2S_IBIT 18
-#define LPASS_CLK_ID_INT3_MI2S_IBIT 19
-#define LPASS_CLK_ID_INT4_MI2S_IBIT 20
-#define LPASS_CLK_ID_INT5_MI2S_IBIT 21
-#define LPASS_CLK_ID_INT6_MI2S_IBIT 22
-#define LPASS_CLK_ID_QUI_MI2S_OSR 23
-#define LPASS_CLK_ID_PRI_PCM_IBIT 24
-#define LPASS_CLK_ID_PRI_PCM_EBIT 25
-#define LPASS_CLK_ID_SEC_PCM_IBIT 26
-#define LPASS_CLK_ID_SEC_PCM_EBIT 27
-#define LPASS_CLK_ID_TER_PCM_IBIT 28
-#define LPASS_CLK_ID_TER_PCM_EBIT 29
-#define LPASS_CLK_ID_QUAD_PCM_IBIT 30
-#define LPASS_CLK_ID_QUAD_PCM_EBIT 31
-#define LPASS_CLK_ID_QUIN_PCM_IBIT 32
-#define LPASS_CLK_ID_QUIN_PCM_EBIT 33
-#define LPASS_CLK_ID_QUI_PCM_OSR 34
-#define LPASS_CLK_ID_PRI_TDM_IBIT 35
-#define LPASS_CLK_ID_PRI_TDM_EBIT 36
-#define LPASS_CLK_ID_SEC_TDM_IBIT 37
-#define LPASS_CLK_ID_SEC_TDM_EBIT 38
-#define LPASS_CLK_ID_TER_TDM_IBIT 39
-#define LPASS_CLK_ID_TER_TDM_EBIT 40
-#define LPASS_CLK_ID_QUAD_TDM_IBIT 41
-#define LPASS_CLK_ID_QUAD_TDM_EBIT 42
-#define LPASS_CLK_ID_QUIN_TDM_IBIT 43
-#define LPASS_CLK_ID_QUIN_TDM_EBIT 44
-#define LPASS_CLK_ID_QUIN_TDM_OSR 45
-#define LPASS_CLK_ID_MCLK_1 46
-#define LPASS_CLK_ID_MCLK_2 47
-#define LPASS_CLK_ID_MCLK_3 48
-#define LPASS_CLK_ID_MCLK_4 49
-#define LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE 50
-#define LPASS_CLK_ID_INT_MCLK_0 51
-#define LPASS_CLK_ID_INT_MCLK_1 52
-#define LPASS_CLK_ID_MCLK_5 53
-#define LPASS_CLK_ID_WSA_CORE_MCLK 54
-#define LPASS_CLK_ID_WSA_CORE_NPL_MCLK 55
-#define LPASS_CLK_ID_VA_CORE_MCLK 56
-#define LPASS_CLK_ID_TX_CORE_MCLK 57
-#define LPASS_CLK_ID_TX_CORE_NPL_MCLK 58
-#define LPASS_CLK_ID_RX_CORE_MCLK 59
-#define LPASS_CLK_ID_RX_CORE_NPL_MCLK 60
-#define LPASS_CLK_ID_VA_CORE_2X_MCLK 61
-/* Clock ID for MCLK for WSA2 core */
-#define LPASS_CLK_ID_WSA2_CORE_MCLK 62
-/* Clock ID for NPL MCLK for WSA2 core */
-#define LPASS_CLK_ID_WSA2_CORE_2X_MCLK 63
-/* Clock ID for RX Core TX MCLK */
-#define LPASS_CLK_ID_RX_CORE_TX_MCLK 64
-/* Clock ID for RX CORE TX 2X MCLK */
-#define LPASS_CLK_ID_RX_CORE_TX_2X_MCLK 65
-/* Clock ID for WSA core TX MCLK */
-#define LPASS_CLK_ID_WSA_CORE_TX_MCLK 66
-/* Clock ID for WSA core TX 2X MCLK */
-#define LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK 67
-/* Clock ID for WSA2 core TX MCLK */
-#define LPASS_CLK_ID_WSA2_CORE_TX_MCLK 68
-/* Clock ID for WSA2 core TX 2X MCLK */
-#define LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK 69
-/* Clock ID for RX CORE MCLK2 2X MCLK */
-#define LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK 70
-
-#define LPASS_HW_AVTIMER_VOTE 101
-#define LPASS_HW_MACRO_VOTE 102
-#define LPASS_HW_DCODEC_VOTE 103
-
-#define Q6AFE_MAX_CLK_ID 104
-
-#define LPASS_CLK_ATTRIBUTE_INVALID 0x0
-#define LPASS_CLK_ATTRIBUTE_COUPLE_NO 0x1
-#define LPASS_CLK_ATTRIBUTE_COUPLE_DIVIDEND 0x2
-#define LPASS_CLK_ATTRIBUTE_COUPLE_DIVISOR 0x3
-
-#endif /* __DT_BINDINGS_Q6_AUDIO_PORTS_H__ */
diff --git a/include/dt-bindings/sound/qcom,wcd9335.h b/include/dt-bindings/sound/qcom,wcd9335.h
deleted file mode 100644
index f5e9f1d..0000000
--- a/include/dt-bindings/sound/qcom,wcd9335.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-
-#ifndef __DT_SOUND_QCOM_WCD9335_H
-#define __DT_SOUND_QCOM_WCD9335_H
-
-#define AIF1_PB 0
-#define AIF1_CAP 1
-#define AIF2_PB 2
-#define AIF2_CAP 3
-#define AIF3_PB 4
-#define AIF3_CAP 5
-#define AIF4_PB 6
-#define NUM_CODEC_DAIS 7
-
-#endif
diff --git a/include/efi_api.h b/include/efi_api.h
index f07d074..61c4eda 100644
--- a/include/efi_api.h
+++ b/include/efi_api.h
@@ -616,6 +616,7 @@
# define DEVICE_PATH_SUB_TYPE_MSG_SCSI 0x02
# define DEVICE_PATH_SUB_TYPE_MSG_USB 0x05
# define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b
+# define DEVICE_PATH_SUB_TYPE_MSG_IPV4 0x0c
# define DEVICE_PATH_SUB_TYPE_MSG_UART 0x0e
# define DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS 0x0f
# define DEVICE_PATH_SUB_TYPE_MSG_USB_WWI 0x10
@@ -691,6 +692,22 @@
u8 uri[];
} __packed;
+struct efi_ipv4_address {
+ u8 ip_addr[4];
+};
+
+struct efi_device_path_ipv4 {
+ struct efi_device_path dp;
+ struct efi_ipv4_address local_ip_address;
+ struct efi_ipv4_address remote_ip_address;
+ u16 local_port;
+ u16 remote_port;
+ u16 protocol;
+ u8 static_ip_address;
+ struct efi_ipv4_address gateway_ip_address;
+ struct efi_ipv4_address subnet_mask;
+} __packed;
+
#define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04
# define DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH 0x01
# define DEVICE_PATH_SUB_TYPE_CDROM_PATH 0x02
@@ -1708,6 +1725,209 @@
struct efi_pxe_mode *mode;
};
+#define EFI_IP4_CONFIG2_PROTOCOL_GUID \
+ EFI_GUID(0x5b446ed1, 0xe30b, 0x4faa, \
+ 0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80)
+
+enum efi_ip4_config2_data_type {
+ EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO,
+ EFI_IP4_CONFIG2_DATA_TYPE_POLICY,
+ EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ EFI_IP4_CONFIG2_DATA_TYPE_GATEWAY,
+ EFI_IP4_CONFIG2_DATA_TYPE_DNSSERVER,
+ EFI_IP4_CONFIG2_DATA_TYPE_MAXIMUM,
+};
+
+struct efi_ip4_config2_protocol {
+ efi_status_t (EFIAPI * set_data)(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ efi_uintn_t data_size,
+ void *data);
+ efi_status_t (EFIAPI * get_data)(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ efi_uintn_t *data_size,
+ void *data);
+ efi_status_t (EFIAPI * register_data_notify)(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ struct efi_event *event);
+ efi_status_t (EFIAPI * unregister_data_notify)(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ struct efi_event *event);
+};
+
+struct efi_ip4_route_table {
+ struct efi_ipv4_address subnet_address;
+ struct efi_ipv4_address subnet_mask;
+ struct efi_ipv4_address gateway_address;
+};
+
+#define EFI_IP4_CONFIG2_INTERFACE_INFO_NAME_SIZE 32
+
+struct efi_ip4_config2_interface_info {
+ u16 name[EFI_IP4_CONFIG2_INTERFACE_INFO_NAME_SIZE];
+ u8 if_type;
+ u32 hw_address_size;
+ struct efi_mac_address hw_address;
+ struct efi_ipv4_address station_address;
+ struct efi_ipv4_address subnet_mask;
+ u32 route_table_size;
+ struct efi_ip4_route_table *route_table;
+};
+
+enum efi_ip4_config2_policy {
+ EFI_IP4_CONFIG2_POLICY_STATIC,
+ EFI_IP4_CONFIG2_POLICY_DHCP,
+ EFI_IP4_CONFIG2_POLICY_MAX
+};
+
+struct efi_ip4_config2_manual_address {
+ struct efi_ipv4_address address;
+ struct efi_ipv4_address subnet_mask;
+};
+
+#define EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID \
+ EFI_GUID(0xbdc8e6af, 0xd9bc, 0x4379, \
+ 0xa7, 0x2a, 0xe0, 0xc4, 0xe7, 0x5d, 0xae, 0x1c)
+
+struct efi_service_binding_protocol {
+ efi_status_t (EFIAPI * create_child)(struct efi_service_binding_protocol *this,
+ efi_handle_t *child_handle);
+ efi_status_t (EFIAPI * destroy_child)(struct efi_service_binding_protocol *this,
+ efi_handle_t child_handle);
+};
+
+#define EFI_HTTP_PROTOCOL_GUID \
+ EFI_GUID(0x7A59B29B, 0x910B, 0x4171, \
+ 0x82, 0x42, 0xA8, 0x5A, 0x0D, 0xF2, 0x5B, 0x5B)
+
+enum efi_http_version {
+ HTTPVERSION10,
+ HTTPVERSION11,
+ HTTPVERSIONUNSUPPORTED
+};
+
+struct efi_httpv4_access_point {
+ bool use_default_address;
+ struct efi_ipv4_address local_address;
+ struct efi_ipv4_address local_subnet;
+ u16 local_port;
+};
+
+union efi_http_access_point {
+ struct efi_httpv4_access_point *ipv4_node;
+ struct efi_httpv6_access_point *ipv6_node;
+};
+
+struct efi_http_config_data {
+ enum efi_http_version http_version;
+ u32 timeout;
+ bool is_ipv6;
+ union efi_http_access_point access_point;
+};
+
+enum efi_http_method {
+ HTTP_METHOD_GET,
+ HTTP_METHOD_POST,
+ HTTP_METHOD_PATCH,
+ HTTP_METHOD_OPTIONS,
+ HTTP_METHOD_CONNECT,
+ HTTP_METHOD_HEAD,
+ HTTP_METHOD_PUT,
+ HTTP_METHOD_DELETE,
+ HTTP_METHOD_TRACE,
+ HTTP_METHOD_MAX
+};
+
+enum efi_http_status_code {
+ HTTP_STATUS_UNSUPPORTED_STATUS = 0,
+ HTTP_STATUS_100_CONTINUE,
+ HTTP_STATUS_101_SWITCHING_PROTOCOLS,
+ HTTP_STATUS_200_OK,
+ HTTP_STATUS_201_CREATED,
+ HTTP_STATUS_202_ACCEPTED,
+ HTTP_STATUS_203_NON_AUTHORITATIVE_INFORMATION,
+ HTTP_STATUS_204_NO_CONTENT,
+ HTTP_STATUS_205_RESET_CONTENT,
+ HTTP_STATUS_206_PARTIAL_CONTENT,
+ HTTP_STATUS_300_MULTIPLE_CHOICES,
+ HTTP_STATUS_301_MOVED_PERMANENTLY,
+ HTTP_STATUS_302_FOUND,
+ HTTP_STATUS_303_SEE_OTHER,
+ HTTP_STATUS_304_NOT_MODIFIED,
+ HTTP_STATUS_305_USE_PROXY,
+ HTTP_STATUS_307_TEMPORARY_REDIRECT,
+ HTTP_STATUS_400_BAD_REQUEST,
+ HTTP_STATUS_401_UNAUTHORIZED,
+ HTTP_STATUS_402_PAYMENT_REQUIRED,
+ HTTP_STATUS_403_FORBIDDEN,
+ HTTP_STATUS_404_NOT_FOUND,
+ HTTP_STATUS_405_METHOD_NOT_ALLOWED,
+ HTTP_STATUS_406_NOT_ACCEPTABLE,
+ HTTP_STATUS_407_PROXY_AUTHENTICATION_REQUIRED,
+ HTTP_STATUS_408_REQUEST_TIME_OUT,
+ HTTP_STATUS_409_CONFLICT,
+ HTTP_STATUS_410_GONE,
+ HTTP_STATUS_411_LENGTH_REQUIRED,
+ HTTP_STATUS_412_PRECONDITION_FAILED,
+ HTTP_STATUS_413_REQUEST_ENTITY_TOO_LARGE,
+ HTTP_STATUS_414_REQUEST_URI_TOO_LARGE,
+ HTTP_STATUS_415_UNSUPPORTED_MEDIA_TYPE,
+ HTTP_STATUS_416_REQUESTED_RANGE_NOT_SATISFIED,
+ HTTP_STATUS_417_EXPECTATION_FAILED,
+ HTTP_STATUS_500_INTERNAL_SERVER_ERROR,
+ HTTP_STATUS_501_NOT_IMPLEMENTED,
+ HTTP_STATUS_502_BAD_GATEWAY,
+ HTTP_STATUS_503_SERVICE_UNAVAILABLE,
+ HTTP_STATUS_504_GATEWAY_TIME_OUT,
+ HTTP_STATUS_505_HTTP_VERSION_NOT_SUPPORTED,
+ HTTP_STATUS_308_PERMANENT_REDIRECT
+};
+
+struct efi_http_request_data {
+ enum efi_http_method method;
+ u16 *url;
+};
+
+struct efi_http_response_data {
+ enum efi_http_status_code status_code;
+};
+
+struct efi_http_header {
+ char *field_name;
+ char *field_value;
+};
+
+struct efi_http_message {
+ union {
+ struct efi_http_request_data *request;
+ struct efi_http_response_data *response;
+ } data;
+ efi_uintn_t header_count;
+ struct efi_http_header *headers;
+ efi_uintn_t body_length;
+ void *body;
+};
+
+struct efi_http_token {
+ struct efi_event *event;
+ efi_status_t status;
+ struct efi_http_message *message;
+};
+
+struct efi_http_protocol {
+ efi_status_t (EFIAPI * get_mode_data)(struct efi_http_protocol *this,
+ struct efi_http_config_data *data);
+ efi_status_t (EFIAPI * configure)(struct efi_http_protocol *this,
+ struct efi_http_config_data *data);
+ efi_status_t (EFIAPI * request)(struct efi_http_protocol *this,
+ struct efi_http_token *token);
+ efi_status_t (EFIAPI * cancel)(struct efi_http_protocol *this,
+ struct efi_http_token *token);
+ efi_status_t (EFIAPI * response)(struct efi_http_protocol *this,
+ struct efi_http_token *token);
+ efi_status_t (EFIAPI * poll)(struct efi_http_protocol *this);
+};
+
#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID \
EFI_GUID(0x964e5b22, 0x6459, 0x11d2, \
0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 39809ea..9afbec3 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -16,6 +16,7 @@
#include <image.h>
#include <pe.h>
#include <linux/list.h>
+#include <linux/sizes.h>
#include <linux/oid_registry.h>
struct blk_desc;
@@ -125,6 +126,39 @@
size_t buffer_size) { }
#endif
+#if CONFIG_IS_ENABLED(NETDEVICES) && CONFIG_IS_ENABLED(EFI_LOADER)
+/* Call this to update the current device path of the efi net device */
+efi_status_t efi_net_set_dp(const char *dev, const char *server);
+/* Call this to get the current device path of the efi net device */
+void efi_net_get_dp(struct efi_device_path **dp);
+void efi_net_get_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw);
+void efi_net_set_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw);
+efi_status_t efi_net_do_request(u8 *url, enum efi_http_method method, void **buffer,
+ u32 *status_code, ulong *file_size, char *headers_buffer);
+#define MAX_HTTP_HEADERS_SIZE SZ_64K
+#define MAX_HTTP_HEADERS 100
+#define MAX_HTTP_HEADER_NAME 128
+#define MAX_HTTP_HEADER_VALUE 512
+struct http_header {
+ uchar name[MAX_HTTP_HEADER_NAME];
+ uchar value[MAX_HTTP_HEADER_VALUE];
+};
+
+void efi_net_parse_headers(ulong *num_headers, struct http_header *headers);
+#else
+static inline void efi_net_get_dp(struct efi_device_path **dp) { }
+static inline void efi_net_get_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw) { }
+static inline void efi_net_set_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw) { }
+#endif
+
/* Maximum number of configuration tables */
#define EFI_MAX_CONFIGURATION_TABLES 16
@@ -592,6 +626,12 @@
efi_status_t efi_gop_register(void);
/* Called by bootefi to make the network interface available */
efi_status_t efi_net_register(void);
+/* Called by efi_net_register to make the ip4 config2 protocol available */
+efi_status_t efi_ipconfig_register(const efi_handle_t handle,
+ struct efi_ip4_config2_protocol *ip4config);
+/* Called by efi_net_register to make the http protocol available */
+efi_status_t efi_http_register(const efi_handle_t handle,
+ struct efi_service_binding_protocol *http_service_binding);
/* Called by bootefi to make the watchdog available */
efi_status_t efi_watchdog_register(void);
efi_status_t efi_initrd_register(void);
@@ -856,6 +896,7 @@
struct efi_device_path *efi_dp_from_file(const struct efi_device_path *dp,
const char *path);
struct efi_device_path *efi_dp_from_eth(void);
+struct efi_device_path *efi_dp_from_http(const char *server);
struct efi_device_path *efi_dp_from_mem(uint32_t mem_type,
uint64_t start_address,
size_t size);
diff --git a/include/env_callback.h b/include/env_callback.h
index bc8ff19..47a31f6 100644
--- a/include/env_callback.h
+++ b/include/env_callback.h
@@ -14,11 +14,6 @@
#define ENV_CALLBACK_VAR ".callbacks"
-/* Board configs can define additional static callback bindings */
-#ifndef CFG_ENV_CALLBACK_LIST_STATIC
-#define CFG_ENV_CALLBACK_LIST_STATIC
-#endif
-
#ifdef CONFIG_SILENT_CONSOLE
#define SILENT_CALLBACK "silent:silent,"
#else
@@ -90,7 +85,7 @@
SILENT_CALLBACK \
"stdin:console,stdout:console,stderr:console," \
"serial#:serialno," \
- CFG_ENV_CALLBACK_LIST_STATIC
+ CONFIG_ENV_CALLBACK_LIST_STATIC
#ifndef CONFIG_XPL_BUILD
void env_callback_init(struct env_entry *var_entry);
diff --git a/include/firmware/imx/sci/rpc.h b/include/firmware/imx/sci/rpc.h
index 28adec2..04acc7f 100644
--- a/include/firmware/imx/sci/rpc.h
+++ b/include/firmware/imx/sci/rpc.h
@@ -231,4 +231,7 @@
#define TIMER_FUNC_SET_SYSCTR_PERIODIC_ALARM 17U /* Index for sc_timer_set_sysctr_periodic_alarm() RPC call */
#define TIMER_FUNC_CANCEL_SYSCTR_ALARM 18U /* Index for sc_timer_cancel_sysctr_alarm() RPC call */
+/* Siemens specific API extension */
+#define TIMER_FUNC_CTRL_SIEMENS_PMIC_WDOG 20U /*!< Index for sc_timer_ctrl_pmic_wdog() RPC call */
+
#endif /* SC_RPC_H */
diff --git a/include/firmware/imx/sci/sci.h b/include/firmware/imx/sci/sci.h
index 7d8499f..588f367 100644
--- a/include/firmware/imx/sci/sci.h
+++ b/include/firmware/imx/sci/sci.h
@@ -123,6 +123,7 @@
/* Timer API */
int sc_timer_set_wdog_window(sc_ipc_t ipc, sc_timer_wdog_time_t window);
+int sc_timer_control_siemens_pmic_wdog(sc_ipc_t ipc, u8 cmd);
/* SECO API */
int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd,
diff --git a/include/handoff.h b/include/handoff.h
index 0072ea8..c0ae7b1 100644
--- a/include/handoff.h
+++ b/include/handoff.h
@@ -32,13 +32,6 @@
void handoff_load_dram_banks(struct spl_handoff *ho);
/**
- * handoff_get() - Get the SPL handoff information
- *
- * Return: Pointer to SPL handoff if received, else NULL
- */
-struct spl_handoff *handoff_get(void);
-
-/**
* handoff_arch_save() - Save arch-specific info into the handoff area
*
* This is defined to an empty function by default, but arch-specific code can
diff --git a/include/image.h b/include/image.h
index c52fced..9be5acd 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1802,6 +1802,30 @@
struct andr_image_data;
/**
+ * android_image_get_bootimg_size() - Extract size of Android boot image
+ *
+ * This is used to extract the size of an Android boot image
+ * from boot image header.
+ *
+ * @hdr: Pointer to boot image header
+ * @boot_img_size: On exit returns the size in bytes of the boot image
+ * Return: true if succeeded, false otherwise
+ */
+bool android_image_get_bootimg_size(const void *hdr, u32 *boot_img_size);
+
+/**
+ * android_image_get_vendor_bootimg_size() - Extract size of Android vendor-boot image
+ *
+ * This is used to extract the size of an Android vendor-boot image
+ * from vendor-boot image header.
+ *
+ * @hdr: Pointer to vendor-boot image header
+ * @vendor_boot_img_size: On exit returns the size in bytes of the vendor-boot image
+ * Return: true if succeeded, false otherwise
+ */
+bool android_image_get_vendor_bootimg_size(const void *hdr, u32 *vendor_boot_img_size);
+
+/**
* android_image_get_data() - Parse Android boot images
*
* This is used to parse boot and vendor-boot header into
diff --git a/include/k3-avs.h b/include/k3-avs.h
index 1014d5d..5a973e4 100644
--- a/include/k3-avs.h
+++ b/include/k3-avs.h
@@ -20,11 +20,13 @@
#define NUM_OPPS 4
+#define AM6_OPP_LOW 0
#define AM6_OPP_NOM 1
#define AM6_OPP_OD 2
#define AM6_OPP_TURBO 3
int k3_avs_set_opp(struct udevice *dev, int vdd_id, int opp_id);
int k3_avs_notify_freq(int dev_id, int clk_id, u32 freq);
+int k3_avs_check_opp(struct udevice *dev, int vdd_id, int opp_id);
#endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 6751fb5..3ffcd40 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -339,7 +339,7 @@
dev_set_ofnode(mtd->dev, node);
}
-static inline const ofnode mtd_get_ofnode(struct mtd_info *mtd)
+static inline ofnode mtd_get_ofnode(struct mtd_info *mtd)
{
return dev_ofnode(mtd->dev);
}
diff --git a/include/memtop.h b/include/memtop.h
new file mode 100644
index 0000000..28f62e2
--- /dev/null
+++ b/include/memtop.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/**
+ * get_mem_top() - Compute the value of ram_top
+ * @ram_start: Start of RAM
+ * @ram_size: RAM size
+ * @size: Minimum RAM size requested
+ * @fdt: FDT blob
+ *
+ * The function computes the top address of RAM memory that can be
+ * used by U-Boot. This is being done by going through the list of
+ * reserved memory regions specified in the devicetree blob passed
+ * to the function. The logic used here is derived from the lmb
+ * allocation function.
+ *
+ * Return: address of ram top on success, 0 on failure
+ */
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+ phys_size_t size, void *fdt);
diff --git a/include/net-common.h b/include/net-common.h
index 524ed4a..8fc1bac 100644
--- a/include/net-common.h
+++ b/include/net-common.h
@@ -8,6 +8,7 @@
#include <env.h>
#include <hexdump.h>
#include <linux/if_ether.h>
+#include <linux/sizes.h>
#include <linux/types.h>
#include <rand.h>
#include <time.h>
@@ -425,6 +426,16 @@
*/
struct in_addr string_to_ip(const char *s);
+/**
+ * ip_to_string() - Convert a string to ip address
+ *
+ * Implemented in lib/net_utils.c (built unconditionally)
+ *
+ * @x: Input ip to parse
+ * @s: string containing the parsed ip address
+ */
+void ip_to_string(struct in_addr x, char *s);
+
/* copy a filename (allow for "..." notation, limit length) */
void copy_filename(char *dst, const char *src, int size);
@@ -490,13 +501,16 @@
int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
/**
- * wget_with_dns() - runs dns host IP address resulution before wget
+ * wget_do_request() - sends a wget request
+ *
+ * Sends a wget request, if DNS resolution is enabled it resolves the
+ * given uri.
*
* @dst_addr: destination address to download the file
* @uri: uri string of target file of wget
- * Return: downloaded file size, negative if failed
+ * Return: zero on success, negative if failed
*/
-int wget_with_dns(ulong dst_addr, char *uri);
+int wget_do_request(ulong dst_addr, char *uri);
/**
* wget_validate_uri() - varidate the uri
*
@@ -506,4 +520,55 @@
bool wget_validate_uri(char *uri);
//int do_wget(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]);
+/**
+ * enum wget_http_method - http method
+ */
+enum wget_http_method {
+ WGET_HTTP_METHOD_GET,
+ WGET_HTTP_METHOD_POST,
+ WGET_HTTP_METHOD_PATCH,
+ WGET_HTTP_METHOD_OPTIONS,
+ WGET_HTTP_METHOD_CONNECT,
+ WGET_HTTP_METHOD_HEAD,
+ WGET_HTTP_METHOD_PUT,
+ WGET_HTTP_METHOD_DELETE,
+ WGET_HTTP_METHOD_TRACE,
+ WGET_HTTP_METHOD_MAX
+};
+
+/**
+ * define MAX_HTTP_HEADERS_SIZE - maximum headers buffer size
+ *
+ * When receiving http headers, wget fills a buffer with up
+ * to MAX_HTTP_HEADERS_SIZE bytes of header information.
+ */
+#define MAX_HTTP_HEADERS_SIZE SZ_64K
+
+/**
+ * struct wget_http_info - wget parameters
+ * @method: HTTP Method. Filled by client.
+ * @status_code: HTTP status code. Filled by wget.
+ * @file_size: download size. Filled by wget.
+ * @buffer_size: size of client-provided buffer. Filled by client.
+ * @set_bootdev: set boot device with download. Filled by client.
+ * @check_buffer_size: check download does not exceed buffer size.
+ * Filled by client.
+ * @hdr_cont_len: content length according to headers. Filled by wget
+ * @headers: buffer for headers. Filled by wget.
+ */
+struct wget_http_info {
+ enum wget_http_method method;
+ u32 status_code;
+ ulong file_size;
+ ulong buffer_size;
+ bool set_bootdev;
+ bool check_buffer_size;
+ u32 hdr_cont_len;
+ char *headers;
+};
+
+extern struct wget_http_info default_wget_info;
+extern struct wget_http_info *wget_info;
+int wget_request(ulong dst_addr, char *uri, struct wget_http_info *info);
+
#endif /* __NET_COMMON_H__ */
diff --git a/include/net-lwip.h b/include/net-lwip.h
index 1c3583f..4d7f938 100644
--- a/include/net-lwip.h
+++ b/include/net-lwip.h
@@ -17,15 +17,6 @@
int net_lwip_rx(struct udevice *udev, struct netif *netif);
/**
- * wget_with_dns() - runs dns host IP address resulution before wget
- *
- * @dst_addr: destination address to download the file
- * @uri: uri string of target file of wget
- * Return: downloaded file size, negative if failed
- */
-
-int wget_with_dns(ulong dst_addr, char *uri);
-/**
* wget_validate_uri() - varidate the uri
*
* @uri: uri string of target file of wget
diff --git a/include/netdev.h b/include/netdev.h
index 2a06d9a..949245e 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -117,7 +117,7 @@
return num;
}
-struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id);
+struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
diff --git a/include/part.h b/include/part.h
index 9266267..fcb3c13 100644
--- a/include/part.h
+++ b/include/part.h
@@ -74,6 +74,7 @@
* PART_EFI_SYSTEM_PARTITION the partition is an EFI system partition
*/
int bootable;
+ u16 type_flags; /* top 16 bits of GPT partition attributes */
#if CONFIG_IS_ENABLED(PARTITION_UUIDS)
char uuid[UUID_STR_LEN + 1]; /* filesystem UUID as string, if exists */
#endif
diff --git a/include/renesas/rzg2l-pfc.h b/include/renesas/rzg2l-pfc.h
index 2df17ec..0c94487 100644
--- a/include/renesas/rzg2l-pfc.h
+++ b/include/renesas/rzg2l-pfc.h
@@ -22,6 +22,7 @@
#define PIN_CFG_FILONOFF BIT(10)
#define PIN_CFG_FILNUM BIT(11)
#define PIN_CFG_FILCLKSEL BIT(12)
+#define PIN_CFG_OEN BIT(13)
#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH_A | \
PIN_CFG_SR | \
@@ -77,9 +78,12 @@
#define IEN(n) (0x1800 + (n) * 8)
#define PWPR 0x3014
#define SD_CH(n) (0x3000 + (n) * 4)
+#define ETH_POC(ch) (0x300c + (ch) * 4)
#define QSPI 0x3008
+#define ETH_MODE 0x3018
#define PVDD_1800 1 /* I/O domain voltage <= 1.8V */
+#define PVDD_2500 2 /* I/O domain voltage 2.5V */
#define PVDD_3300 0 /* I/O domain voltage >= 3.3V */
#define PWPR_B0WI BIT(7) /* Bit Write Disable */
diff --git a/include/sysinfo.h b/include/sysinfo.h
index 8a77ef4..027a463 100644
--- a/include/sysinfo.h
+++ b/include/sysinfo.h
@@ -40,29 +40,29 @@
/** enum sysinfo_id - Standard IDs defined by U-Boot */
enum sysinfo_id {
- SYSINFO_ID_NONE,
+ SYSID_NONE,
/* For SMBIOS tables */
- SYSINFO_ID_SMBIOS_SYSTEM_MANUFACTURER,
- SYSINFO_ID_SMBIOS_SYSTEM_PRODUCT,
- SYSINFO_ID_SMBIOS_SYSTEM_VERSION,
- SYSINFO_ID_SMBIOS_SYSTEM_SERIAL,
- SYSINFO_ID_SMBIOS_SYSTEM_SKU,
- SYSINFO_ID_SMBIOS_SYSTEM_FAMILY,
- SYSINFO_ID_SMBIOS_BASEBOARD_MANUFACTURER,
- SYSINFO_ID_SMBIOS_BASEBOARD_PRODUCT,
- SYSINFO_ID_SMBIOS_BASEBOARD_VERSION,
- SYSINFO_ID_SMBIOS_BASEBOARD_SERIAL,
- SYSINFO_ID_SMBIOS_BASEBOARD_ASSET_TAG,
+ SYSID_SM_SYSTEM_MANUFACTURER,
+ SYSID_SM_SYSTEM_PRODUCT,
+ SYSID_SM_SYSTEM_VERSION,
+ SYSID_SM_SYSTEM_SERIAL,
+ SYSID_SM_SYSTEM_SKU,
+ SYSID_SM_SYSTEM_FAMILY,
+ SYSID_SM_BASEBOARD_MANUFACTURER,
+ SYSID_SM_BASEBOARD_PRODUCT,
+ SYSID_SM_BASEBOARD_VERSION,
+ SYSID_SM_BASEBOARD_SERIAL,
+ SYSID_SM_BASEBOARD_ASSET_TAG,
/* For show_board_info() */
- SYSINFO_ID_BOARD_MODEL,
- SYSINFO_ID_BOARD_MANUFACTURER,
- SYSINFO_ID_PRIOR_STAGE_VERSION,
- SYSINFO_ID_PRIOR_STAGE_DATE,
+ SYSID_BOARD_MODEL,
+ SYSID_BOARD_MANUFACTURER,
+ SYSID_PRIOR_STAGE_VERSION,
+ SYSID_PRIOR_STAGE_DATE,
/* First value available for downstream/board used */
- SYSINFO_ID_USER = 0x1000,
+ SYSID_USER = 0x1000,
};
struct sysinfo_ops {
diff --git a/include/u-boot/md5.h b/include/u-boot/md5.h
index c98b1a5..2a52e16 100644
--- a/include/u-boot/md5.h
+++ b/include/u-boot/md5.h
@@ -6,7 +6,9 @@
#ifndef _MD5_H
#define _MD5_H
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#include <linux/kconfig.h>
+
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
#include <mbedtls/md5.h>
#endif
#include "compiler.h"
@@ -14,7 +16,7 @@
#define MD5_SUM_LEN 16
#define MD5_DEF_CHUNK_SZ 0x10000
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
typedef mbedtls_md5_context MD5Context;
#else
typedef struct MD5Context {
diff --git a/include/u-boot/sha1.h b/include/u-boot/sha1.h
index 2fca7f1..dd66258 100644
--- a/include/u-boot/sha1.h
+++ b/include/u-boot/sha1.h
@@ -14,9 +14,10 @@
#ifndef _SHA1_H
#define _SHA1_H
+#include <linux/kconfig.h>
#include <linux/types.h>
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
/*
* FIXME:
* MbedTLS define the members of "mbedtls_sha256_context" as private,
@@ -47,7 +48,7 @@
extern const uint8_t sha1_der_prefix[];
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
typedef mbedtls_sha1_context sha1_context;
#else
/**
diff --git a/include/u-boot/sha256.h b/include/u-boot/sha256.h
index b58d5b5..44a9b52 100644
--- a/include/u-boot/sha256.h
+++ b/include/u-boot/sha256.h
@@ -1,9 +1,10 @@
#ifndef _SHA256_H
#define _SHA256_H
+#include <linux/kconfig.h>
#include <linux/types.h>
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
/*
* FIXME:
* MbedTLS define the members of "mbedtls_sha256_context" as private,
@@ -27,7 +28,7 @@
/* Reset watchdog each time we process this many bytes */
#define CHUNKSZ_SHA256 (64 * 1024)
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
typedef mbedtls_sha256_context sha256_context;
#else
typedef struct {
diff --git a/include/u-boot/sha512.h b/include/u-boot/sha512.h
index 7e10f59..92660d9 100644
--- a/include/u-boot/sha512.h
+++ b/include/u-boot/sha512.h
@@ -1,9 +1,10 @@
#ifndef _SHA512_H
#define _SHA512_H
+#include <linux/kconfig.h>
#include <linux/types.h>
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
#include <mbedtls/sha512.h>
#endif
@@ -16,7 +17,7 @@
#define CHUNKSZ_SHA384 (16 * 1024)
#define CHUNKSZ_SHA512 (16 * 1024)
-#if defined(CONFIG_MBEDTLS_LIB_CRYPTO)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_CRYPTO)
typedef mbedtls_sha512_context sha384_context;
typedef mbedtls_sha512_context sha512_context;
#else
diff --git a/lib/Kconfig b/lib/Kconfig
index 56ffdfa..0b08981 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -45,6 +45,15 @@
locate entries in the firmware image. See binman.h for the available
functionality.
+config BINMAN_DTB
+ string "binman DTB description"
+ depends on BINMAN
+ help
+ This enables option to point to different DTB file with binman node which
+ is outside of DTB used by the firmware. Use this option if information
+ about generated images shouldn't be the part of target binary. Or on system
+ with limited storage.
+
config CC_OPTIMIZE_LIBS_FOR_SPEED
bool "Optimize libraries for speed"
help
diff --git a/lib/Makefile b/lib/Makefile
index dbcfa87..d24ed62 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -97,7 +97,7 @@
obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += libfdt/
obj-$(CONFIG_$(PHASE_)OF_REAL) += fdtdec_common.o fdtdec.o
-obj-$(CONFIG_MBEDTLS_LIB) += mbedtls/
+obj-$(CONFIG_$(XPL_)MBEDTLS_LIB) += mbedtls/
obj-$(CONFIG_NET_LWIP) += lwip/
diff --git a/lib/binman.c b/lib/binman.c
index 93d8554..9047f52 100644
--- a/lib/binman.c
+++ b/lib/binman.c
@@ -137,7 +137,6 @@
{
int ret;
- return 0;
binman = malloc(sizeof(struct binman_info));
if (!binman)
return log_msg_ret("space for binman", -ENOMEM);
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 58d4978..c46ffe3 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -2,7 +2,7 @@
config EFI_LOADER
bool "Support running UEFI applications"
- depends on OF_LIBFDT && ( \
+ depends on ( \
ARM && (SYS_CPU = arm1136 || \
SYS_CPU = arm1176 || \
SYS_CPU = armv7 || \
@@ -21,6 +21,7 @@
select EVENT_DYNAMIC
select LIB_UUID
select LMB
+ select OF_LIBFDT
imply PARTITION_UUIDS
select REGEX
imply FAT
@@ -476,12 +477,28 @@
replace the transfer via the device-tree. The latter is not
possible on systems using ACPI.
+config EFI_IP4_CONFIG2_PROTOCOL
+ bool "EFI_IP4_CONFIG2_PROTOCOL support"
+ default y if ARCH_QEMU || SANDBOX
+ depends on NET || NET_LWIP
+ help
+ Provides an implementation of the EFI_IP4_CONFIG2_PROTOCOL, this
+ protocol can be used to set and get the current ip address and
+ other network information.
+
+config EFI_HTTP_PROTOCOL
+ bool "EFI_HTTP_PROTOCOL support"
+ default y if ARCH_QEMU || SANDBOX
+ depends on WGET
+ help
+ Provides an EFI HTTP driver implementing the EFI_HTTP_PROTOCOL. and
+ EFI_HTTP_SERVICE_BINDING_PROTOCOL.
+
endmenu
menu "Misc options"
config EFI_LOADER_BOUNCE_BUFFER
bool "EFI Applications use bounce buffers for DMA operations"
- depends on ARM64
help
Some hardware does not support DMA to full 64bit addresses. For this
hardware we can create a bounce buffer so that payloads don't have to
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index 87131ab..2a0b417 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -59,6 +59,8 @@
obj-$(CONFIG_VIDEO) += efi_gop.o
obj-$(CONFIG_BLK) += efi_disk.o
obj-$(CONFIG_NETDEVICES) += efi_net.o
+obj-$(CONFIG_EFI_IP4_CONFIG2_PROTOCOL) += efi_ipconfig.o
+obj-$(CONFIG_EFI_HTTP_PROTOCOL) += efi_http.o
obj-$(CONFIG_ACPI) += efi_acpi.o
obj-$(CONFIG_SMBIOS) += efi_smbios.o
obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_rng.o
diff --git a/lib/efi_loader/efi_bootbin.c b/lib/efi_loader/efi_bootbin.c
index a87006b..b677bbc 100644
--- a/lib/efi_loader/efi_bootbin.c
+++ b/lib/efi_loader/efi_bootbin.c
@@ -93,24 +93,34 @@
image_addr = buffer;
image_size = buffer_size;
+#if IS_ENABLED(CONFIG_NETDEVICES)
+ if (!strcmp(dev, "Net") || !strcmp(dev, "Http")) {
+ ret = efi_net_set_dp(dev, devnr);
+ if (ret != EFI_SUCCESS)
+ goto error;
+ }
+#endif
+
ret = efi_dp_from_name(dev, devnr, path, &device, &image);
- if (ret == EFI_SUCCESS) {
- bootefi_device_path = device;
- if (image) {
- /* FIXME: image should not contain device */
- struct efi_device_path *image_tmp = image;
+ if (ret != EFI_SUCCESS)
+ goto error;
- efi_dp_split_file_path(image, &device, &image);
- efi_free_pool(image_tmp);
- }
- bootefi_image_path = image;
- log_debug("- boot device %pD\n", device);
- if (image)
- log_debug("- image %pD\n", image);
- } else {
- log_debug("- efi_dp_from_name() failed, err=%lx\n", ret);
- efi_clear_bootdev();
+ bootefi_device_path = device;
+ if (image) {
+ /* FIXME: image should not contain device */
+ struct efi_device_path *image_tmp = image;
+
+ efi_dp_split_file_path(image, &device, &image);
+ efi_free_pool(image_tmp);
}
+ bootefi_image_path = image;
+ log_debug("- boot device %pD\n", device);
+ if (image)
+ log_debug("- image %pD\n", image);
+ return;
+error:
+ log_debug("- efi_dp_from_name() failed, err=%lx\n", ret);
+ efi_clear_bootdev();
}
/**
diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c
index 8c51a6e..c6124c5 100644
--- a/lib/efi_loader/efi_bootmgr.c
+++ b/lib/efi_loader/efi_bootmgr.c
@@ -479,7 +479,7 @@
}
image_addr = hextoul(s, NULL);
- err = wget_with_dns(image_addr, uridp->uri);
+ err = wget_do_request(image_addr, uridp->uri);
if (err < 0) {
ret = EFI_INVALID_PARAMETER;
goto err;
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index 4f52284..080e7f7 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -2234,7 +2234,7 @@
if (IS_ENABLED(CONFIG_USB_DEVICE))
udc_disconnect();
board_quiesce_devices();
- dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);
+ dm_remove_devices_active();
}
/* Patch out unsupported runtime function */
diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c
index ee387e1..c0633a7 100644
--- a/lib/efi_loader/efi_device_path.c
+++ b/lib/efi_loader/efi_device_path.c
@@ -974,6 +974,116 @@
return start;
}
+/**
+ * efi_dp_from_ipv4() - set device path from IPv4 address
+ *
+ * Set the device path to an ethernet device path as provided by
+ * efi_dp_from_eth() concatenated with a device path of subtype
+ * DEVICE_PATH_SUB_TYPE_MSG_IPV4, and an END node.
+ *
+ * @ip: IPv4 local address
+ * @mask: network mask
+ * @srv: IPv4 remote/server address
+ * Return: pointer to device path, NULL on error
+ */
+static struct efi_device_path *efi_dp_from_ipv4(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *srv)
+{
+ struct efi_device_path *dp1, *dp2, *pos;
+ struct {
+ struct efi_device_path_ipv4 ipv4dp;
+ struct efi_device_path end;
+ } dp;
+
+ memset(&dp.ipv4dp, 0, sizeof(dp.ipv4dp));
+ dp.ipv4dp.dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ dp.ipv4dp.dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_IPV4;
+ dp.ipv4dp.dp.length = sizeof(dp.ipv4dp);
+ dp.ipv4dp.protocol = 6;
+ if (ip)
+ memcpy(&dp.ipv4dp.local_ip_address, ip, sizeof(*ip));
+ if (mask)
+ memcpy(&dp.ipv4dp.subnet_mask, mask, sizeof(*mask));
+ if (srv)
+ memcpy(&dp.ipv4dp.remote_ip_address, srv, sizeof(*srv));
+ pos = &dp.end;
+ memcpy(pos, &END, sizeof(END));
+
+ dp1 = efi_dp_from_eth();
+ if (!dp1)
+ return NULL;
+
+ dp2 = efi_dp_concat(dp1, (const struct efi_device_path *)&dp, 0);
+
+ efi_free_pool(dp1);
+
+ return dp2;
+}
+
+/**
+ * efi_dp_from_http() - set device path from http
+ *
+ * Set the device path to an IPv4 path as provided by efi_dp_from_ipv4
+ * concatenated with a device path of subtype DEVICE_PATH_SUB_TYPE_MSG_URI,
+ * and an END node.
+ *
+ * @server: URI of remote server
+ * Return: pointer to HTTP device path, NULL on error
+ */
+struct efi_device_path *efi_dp_from_http(const char *server)
+{
+ struct efi_device_path *dp1, *dp2;
+ struct efi_device_path_uri *uridp;
+ efi_uintn_t uridp_len;
+ char *pos;
+ char tmp[128];
+ struct efi_ipv4_address ip;
+ struct efi_ipv4_address mask;
+
+ if ((server && strlen("http://") + strlen(server) + 1 > sizeof(tmp)) ||
+ (!server && IS_ENABLED(CONFIG_NET_LWIP)))
+ return NULL;
+
+ efi_net_get_addr(&ip, &mask, NULL);
+
+ dp1 = efi_dp_from_ipv4(&ip, &mask, NULL);
+ if (!dp1)
+ return NULL;
+
+ strcpy(tmp, "http://");
+
+ if (server) {
+ strlcat(tmp, server, sizeof(tmp));
+#if !IS_ENABLED(CONFIG_NET_LWIP)
+ } else {
+ ip_to_string(net_server_ip, tmp + strlen("http://"));
+#endif
+ }
+
+ uridp_len = sizeof(struct efi_device_path) + strlen(tmp) + 1;
+ uridp = efi_alloc(uridp_len + sizeof(END));
+ if (!uridp) {
+ log_err("Out of memory\n");
+ return NULL;
+ }
+ uridp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ uridp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_URI;
+ uridp->dp.length = uridp_len;
+ debug("device path: setting uri device path to %s\n", tmp);
+ memcpy(uridp->uri, tmp, strlen(tmp) + 1);
+
+ pos = (char *)uridp + uridp_len;
+ memcpy(pos, &END, sizeof(END));
+
+ dp2 = efi_dp_concat(dp1, (const struct efi_device_path *)uridp, 0);
+
+ efi_free_pool(uridp);
+ efi_free_pool(dp1);
+
+ return dp2;
+}
+
/* Construct a device-path for memory-mapped image */
struct efi_device_path *efi_dp_from_mem(uint32_t memory_type,
uint64_t start_address,
@@ -1074,8 +1184,9 @@
dp = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
(uintptr_t)image_addr, image_size);
- } else if (IS_ENABLED(CONFIG_NETDEVICES) && !strcmp(dev, "Net")) {
- dp = efi_dp_from_eth();
+ } else if (IS_ENABLED(CONFIG_NETDEVICES) &&
+ (!strcmp(dev, "Net") || !strcmp(dev, "Http"))) {
+ efi_net_get_dp(&dp);
} else if (!strcmp(dev, "Uart")) {
dp = efi_dp_from_uart();
} else {
diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c
index 0c7b30a..481a971 100644
--- a/lib/efi_loader/efi_device_path_to_text.c
+++ b/lib/efi_loader/efi_device_path_to_text.c
@@ -8,6 +8,7 @@
#include <blk.h>
#include <efi_loader.h>
#include <malloc.h>
+#include <net.h>
#define MAC_OUTPUT_LEN 22
#define UNKNOWN_OUTPUT_LEN 23
@@ -170,6 +171,28 @@
break;
}
+ case DEVICE_PATH_SUB_TYPE_MSG_IPV4: {
+ struct efi_device_path_ipv4 *idp =
+ (struct efi_device_path_ipv4 *)dp;
+
+ s += sprintf(s, "IPv4(%pI4,", &idp->remote_ip_address);
+ switch (idp->protocol) {
+ case IPPROTO_TCP:
+ s += sprintf(s, "TCP,");
+ case IPPROTO_UDP:
+ s += sprintf(s, "UDP,");
+ default:
+ s += sprintf(s, "0x%x,", idp->protocol);
+ }
+ s += sprintf(s, idp->static_ip_address ? "Static" : "DHCP");
+ s += sprintf(s, ",%pI4", &idp->local_ip_address);
+ if (idp->dp.length == sizeof(struct efi_device_path_ipv4))
+ s += sprintf(s, ",%pI4,%pI4", &idp->gateway_ip_address,
+ &idp->subnet_mask);
+ s += sprintf(s, ")");
+
+ break;
+ }
case DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS: {
struct efi_device_path_usb_class *ucdp =
(struct efi_device_path_usb_class *)dp;
diff --git a/lib/efi_loader/efi_firmware.c b/lib/efi_loader/efi_firmware.c
index 6650c2b..112775d 100644
--- a/lib/efi_loader/efi_firmware.c
+++ b/lib/efi_loader/efi_firmware.c
@@ -281,6 +281,10 @@
}
for (i = 0; i < update_info.num_images; i++) {
+ if (!fw_array[i].fw_name) {
+ log_err("fw_name is not defined. Not generating capsule GUIDs\n");
+ return EFI_INVALID_PARAMETER;
+ }
gen_v5_guid(&namespace,
&fw_array[i].image_type_id,
compatible, strlen(compatible),
diff --git a/lib/efi_loader/efi_http.c b/lib/efi_loader/efi_http.c
new file mode 100644
index 0000000..694e199
--- /dev/null
+++ b/lib/efi_loader/efi_http.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * An HTTP driver
+ *
+ * HTTP_PROTOCOL
+ * HTTP_SERVICE_BINDING_PROTOCOL
+ * IP4_CONFIG2_PROTOCOL
+ */
+
+#include <charset.h>
+#include <efi_loader.h>
+#include <image.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <net.h>
+
+static const efi_guid_t efi_http_service_binding_guid = EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID;
+static const efi_guid_t efi_http_guid = EFI_HTTP_PROTOCOL_GUID;
+
+/**
+ * struct efi_http_instance - EFI object representing an HTTP protocol instance
+ *
+ * @http: EFI_HTTP_PROTOCOL interface
+ * @handle: handle to efi object
+ * @configured: configuration status
+ * @http_load_addr: data buffer
+ * @file_size: size of data
+ * @current_offset: offset in data buffer
+ * @status_code: HTTP status code
+ * @num_headers: number of received headers
+ * @headers: array of headers
+ * @headers_buffer: raw buffer with headers
+ */
+struct efi_http_instance {
+ struct efi_http_protocol http;
+ efi_handle_t handle;
+ bool configured;
+ void *http_load_addr;
+ ulong file_size;
+ ulong current_offset;
+ u32 status_code;
+ ulong num_headers;
+ struct http_header headers[MAX_HTTP_HEADERS];
+ char headers_buffer[MAX_HTTP_HEADERS_SIZE];
+};
+
+static int num_instances;
+
+/*
+ * efi_u32_to_httpstatus() - convert u32 to status
+ *
+ */
+enum efi_http_status_code efi_u32_to_httpstatus(u32 status);
+
+/*
+ * efi_http_send_data() - sends data to client
+ *
+ *
+ * @client_buffer: client buffer to send data to
+ * @client_buffer_size: size of the client buffer
+ * @inst: HTTP instance for which to send data
+ *
+ * Return: status code
+ */
+static efi_status_t efi_http_send_data(void *client_buffer,
+ efi_uintn_t *client_buffer_size,
+ struct efi_http_instance *inst)
+{
+ efi_status_t ret = EFI_SUCCESS;
+ ulong total_size, transfer_size;
+ uchar *ptr;
+
+ // Amount of data left;
+ total_size = inst->file_size;
+ transfer_size = total_size - inst->current_offset;
+ debug("efi_http: sending data to client, total size %lu\n", total_size);
+ // Amount of data the client is willing to receive
+ if (transfer_size > *client_buffer_size)
+ transfer_size = *client_buffer_size;
+ else
+ *client_buffer_size = transfer_size;
+ debug("efi_http: transfer size %lu\n", transfer_size);
+ if (!transfer_size) // Ok, only headers
+ goto out;
+
+ if (!client_buffer) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ // Send data
+ ptr = (uchar *)inst->http_load_addr + inst->current_offset;
+ memcpy(client_buffer, ptr, transfer_size);
+
+ inst->current_offset += transfer_size;
+
+ // Whole file served, clean the buffer:
+ if (inst->current_offset == inst->file_size) {
+ efi_free_pool(inst->http_load_addr);
+ inst->http_load_addr = NULL;
+ inst->current_offset = 0;
+ inst->file_size = 0;
+ }
+
+out:
+ return ret;
+}
+
+/* EFI_HTTP_PROTOCOL */
+
+/*
+ * efi_http_get_mode_data() - Gets the current operational status.
+ *
+ * This function implements EFI_HTTP_PROTOCOL.GetModeData().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data: pointer to the buffer for operational parameters
+ * of this HTTP instance
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_get_mode_data(struct efi_http_protocol *this,
+ struct efi_http_config_data *data)
+{
+ EFI_ENTRY("%p, %p", this, data);
+
+ efi_status_t ret = EFI_UNSUPPORTED;
+
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_configure() - Initializes operational status for this
+ * EFI HTTP instance.
+ *
+ * This function implements EFI_HTTP_PROTOCOL.Configure().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data: pointer to the buffer for operational parameters of
+ * this HTTP instance
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_configure(struct efi_http_protocol *this,
+ struct efi_http_config_data *data)
+{
+ EFI_ENTRY("%p, %p", this, data);
+
+ efi_status_t ret = EFI_SUCCESS;
+ enum efi_http_version http_version;
+ struct efi_httpv4_access_point *ipv4_node;
+ struct efi_http_instance *http_instance;
+
+ if (!this) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ http_instance = (struct efi_http_instance *)this;
+
+ if (!data) {
+ efi_free_pool(http_instance->http_load_addr);
+ http_instance->http_load_addr = NULL;
+ http_instance->current_offset = 0;
+ http_instance->configured = false;
+
+ goto out;
+ }
+
+ if (http_instance->configured) {
+ ret = EFI_ALREADY_STARTED;
+ goto out;
+ }
+
+ http_version = data->http_version;
+ ipv4_node = data->access_point.ipv4_node;
+
+ if ((http_version != HTTPVERSION10 &&
+ http_version != HTTPVERSION11) ||
+ data->is_ipv6 || !ipv4_node) { /* Only support ipv4 */
+ ret = EFI_UNSUPPORTED;
+ goto out;
+ }
+
+ if (!ipv4_node->use_default_address) {
+ efi_net_set_addr((struct efi_ipv4_address *)&ipv4_node->local_address,
+ (struct efi_ipv4_address *)&ipv4_node->local_subnet, NULL);
+ }
+
+ http_instance->current_offset = 0;
+ http_instance->configured = true;
+
+out:
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_request() - Queues an HTTP request to this HTTP instance
+ *
+ * This function implements EFI_HTTP_PROTOCOL.Request().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @token: pointer to storage containing HTTP request token
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_request(struct efi_http_protocol *this,
+ struct efi_http_token *token)
+{
+ EFI_ENTRY("%p, %p", this, token);
+
+ efi_status_t ret = EFI_SUCCESS;
+ u8 *tmp;
+ u8 url_8[1024];
+ u16 *url_16;
+ enum efi_http_method current_method;
+ struct efi_http_instance *http_instance;
+
+ if (!token || !this || !token->message ||
+ !token->message->data.request) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ http_instance = (struct efi_http_instance *)this;
+
+ if (!http_instance->configured) {
+ ret = EFI_NOT_STARTED;
+ goto out;
+ }
+
+ current_method = token->message->data.request->method;
+ url_16 = token->message->data.request->url;
+
+ /* Parse URL. It comes in UCS-2 encoding and follows RFC3986 */
+ tmp = url_8;
+ utf16_utf8_strncpy((char **)&tmp, url_16, 1024);
+
+ ret = efi_net_do_request(url_8, current_method, &http_instance->http_load_addr,
+ &http_instance->status_code, &http_instance->file_size,
+ http_instance->headers_buffer);
+ if (ret != EFI_SUCCESS)
+ goto out;
+
+ // We have a successful request
+ efi_net_parse_headers(&http_instance->num_headers, http_instance->headers);
+ http_instance->current_offset = 0;
+ token->status = EFI_SUCCESS;
+ goto out_signal;
+
+out_signal:
+ efi_signal_event(token->event);
+out:
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_cancel() - Abort an asynchronous HTTP request or response token
+ *
+ * This function implements EFI_HTTP_PROTOCOL.Cancel().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @token: pointer to storage containing HTTP request token
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_cancel(struct efi_http_protocol *this,
+ struct efi_http_token *token)
+{
+ EFI_ENTRY("%p, %p", this, token);
+
+ efi_status_t ret = EFI_UNSUPPORTED;
+
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_response() - Queues an HTTP response to this HTTP instance
+ *
+ * This function implements EFI_HTTP_PROTOCOL.Response().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @token: pointer to storage containing HTTP request token
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_response(struct efi_http_protocol *this,
+ struct efi_http_token *token)
+{
+ EFI_ENTRY("%p, %p", this, token);
+
+ efi_status_t ret = EFI_SUCCESS;
+ struct efi_http_instance *http_instance;
+ struct efi_http_header **client_headers;
+ struct efi_http_response_data *response;
+
+ if (!token || !this || !token->message) {
+ ret = EFI_INVALID_PARAMETER;
+ goto out;
+ }
+
+ http_instance = (struct efi_http_instance *)this;
+
+ // Set HTTP status code
+ if (token->message->data.response) { // TODO extra check, see spec.
+ response = token->message->data.response;
+ response->status_code = efi_u32_to_httpstatus(http_instance->status_code);
+ }
+
+ client_headers = &token->message->headers;
+
+ ret = efi_allocate_pool(EFI_BOOT_SERVICES_DATA,
+ (http_instance->num_headers) * sizeof(struct efi_http_header),
+ (void **)client_headers); // This is deallocated by the client.
+ if (ret != EFI_SUCCESS)
+ goto out_bad_signal;
+
+ // Send headers
+ token->message->header_count = http_instance->num_headers;
+ for (int i = 0; i < http_instance->num_headers; i++) {
+ (*client_headers)[i].field_name = http_instance->headers[i].name;
+ (*client_headers)[i].field_value = http_instance->headers[i].value;
+ }
+
+ ret = efi_http_send_data(token->message->body, &token->message->body_length, http_instance);
+ if (ret != EFI_SUCCESS)
+ goto out_bad_signal;
+
+ token->status = EFI_SUCCESS;
+ goto out_signal;
+
+out_bad_signal:
+ token->status = EFI_ABORTED;
+out_signal:
+ efi_signal_event(token->event);
+out:
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_poll() - Polls for incoming data packets and processes outgoing data packets
+ *
+ * This function implements EFI_HTTP_PROTOCOL.Poll().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @token: pointer to storage containing HTTP request token
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_poll(struct efi_http_protocol *this)
+{
+ EFI_ENTRY("%p", this);
+
+ efi_status_t ret = EFI_UNSUPPORTED;
+
+ return EFI_EXIT(ret);
+}
+
+/* EFI_HTTP_SERVICE_BINDING_PROTOCOL */
+
+/*
+ * efi_http_service_binding_create_child() - Creates a child handle
+ * and installs a protocol
+ *
+ * This function implements EFI_HTTP_SERVICE_BINDING.CreateChild().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @child_handle: pointer to child handle
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_service_binding_create_child(
+ struct efi_service_binding_protocol *this,
+ efi_handle_t *child_handle)
+{
+ EFI_ENTRY("%p, %p", this, child_handle);
+
+ efi_status_t ret = EFI_SUCCESS;
+ struct efi_http_instance *new_instance;
+
+ if (!child_handle)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ new_instance = calloc(1, sizeof(struct efi_http_instance));
+ if (!new_instance) {
+ ret = EFI_OUT_OF_RESOURCES;
+ goto failure_to_add_protocol;
+ }
+
+ if (*child_handle) {
+ new_instance->handle = *child_handle;
+ goto install;
+ }
+
+ new_instance->handle = calloc(1, sizeof(struct efi_object));
+ if (!new_instance->handle) {
+ efi_free_pool((void *)new_instance);
+ ret = EFI_OUT_OF_RESOURCES;
+ goto failure_to_add_protocol;
+ }
+
+ efi_add_handle(new_instance->handle);
+ *child_handle = new_instance->handle;
+
+install:
+ ret = efi_add_protocol(new_instance->handle, &efi_http_guid,
+ &new_instance->http);
+ if (ret != EFI_SUCCESS)
+ goto failure_to_add_protocol;
+
+ new_instance->http.get_mode_data = efi_http_get_mode_data;
+ new_instance->http.configure = efi_http_configure;
+ new_instance->http.request = efi_http_request;
+ new_instance->http.cancel = efi_http_cancel;
+ new_instance->http.response = efi_http_response;
+ new_instance->http.poll = efi_http_poll;
+ ++num_instances;
+
+ return EFI_EXIT(EFI_SUCCESS);
+
+failure_to_add_protocol:
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_http_service_binding_destroy_child() - Destroys a child handle with
+ * a protocol installed on it
+ *
+ * This function implements EFI_HTTP_SERVICE_BINDING.DestroyChild().
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @child_handle: child handle
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_http_service_binding_destroy_child(
+ struct efi_service_binding_protocol *this,
+ efi_handle_t child_handle)
+{
+ EFI_ENTRY("%p, %p", this, child_handle);
+ efi_status_t ret = EFI_SUCCESS;
+ struct efi_http_instance *http_instance;
+ struct efi_handler *phandler;
+ void *protocol_interface;
+
+ if (num_instances == 0)
+ return EFI_EXIT(EFI_NOT_FOUND);
+
+ if (!child_handle)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ efi_search_protocol(child_handle, &efi_http_guid, &phandler);
+
+ if (phandler)
+ protocol_interface = phandler->protocol_interface;
+
+ ret = efi_delete_handle(child_handle);
+ if (ret != EFI_SUCCESS)
+ return EFI_EXIT(ret);
+
+ http_instance = (struct efi_http_instance *)protocol_interface;
+ efi_free_pool(http_instance->http_load_addr);
+ http_instance->http_load_addr = NULL;
+
+ free(protocol_interface);
+
+ num_instances--;
+
+ return EFI_EXIT(EFI_SUCCESS);
+}
+
+/**
+ * efi_http_register() - register the http protocol
+ *
+ */
+efi_status_t efi_http_register(const efi_handle_t handle,
+ struct efi_service_binding_protocol *http_service_binding)
+{
+ efi_status_t r = EFI_SUCCESS;
+
+ r = efi_add_protocol(handle, &efi_http_service_binding_guid,
+ http_service_binding);
+ if (r != EFI_SUCCESS)
+ goto failure_to_add_protocol;
+
+ http_service_binding->create_child = efi_http_service_binding_create_child;
+ http_service_binding->destroy_child = efi_http_service_binding_destroy_child;
+
+ return EFI_SUCCESS;
+failure_to_add_protocol:
+ return r;
+}
+
+enum efi_http_status_code efi_u32_to_httpstatus(u32 status)
+{
+ switch (status) {
+ case 100: return HTTP_STATUS_100_CONTINUE;
+ case 101: return HTTP_STATUS_101_SWITCHING_PROTOCOLS;
+ case 200: return HTTP_STATUS_200_OK;
+ case 201: return HTTP_STATUS_201_CREATED;
+ case 202: return HTTP_STATUS_202_ACCEPTED;
+ case 203: return HTTP_STATUS_203_NON_AUTHORITATIVE_INFORMATION;
+ case 204: return HTTP_STATUS_204_NO_CONTENT;
+ case 205: return HTTP_STATUS_205_RESET_CONTENT;
+ case 206: return HTTP_STATUS_206_PARTIAL_CONTENT;
+ case 300: return HTTP_STATUS_300_MULTIPLE_CHOICES;
+ case 301: return HTTP_STATUS_301_MOVED_PERMANENTLY;
+ case 302: return HTTP_STATUS_302_FOUND;
+ case 303: return HTTP_STATUS_303_SEE_OTHER;
+ case 304: return HTTP_STATUS_304_NOT_MODIFIED;
+ case 305: return HTTP_STATUS_305_USE_PROXY;
+ case 307: return HTTP_STATUS_307_TEMPORARY_REDIRECT;
+ case 400: return HTTP_STATUS_400_BAD_REQUEST;
+ case 401: return HTTP_STATUS_401_UNAUTHORIZED;
+ case 402: return HTTP_STATUS_402_PAYMENT_REQUIRED;
+ case 403: return HTTP_STATUS_403_FORBIDDEN;
+ case 404: return HTTP_STATUS_404_NOT_FOUND;
+ case 405: return HTTP_STATUS_405_METHOD_NOT_ALLOWED;
+ case 406: return HTTP_STATUS_406_NOT_ACCEPTABLE;
+ case 407: return HTTP_STATUS_407_PROXY_AUTHENTICATION_REQUIRED;
+ case 408: return HTTP_STATUS_408_REQUEST_TIME_OUT;
+ case 409: return HTTP_STATUS_409_CONFLICT;
+ case 410: return HTTP_STATUS_410_GONE;
+ case 411: return HTTP_STATUS_411_LENGTH_REQUIRED;
+ case 412: return HTTP_STATUS_412_PRECONDITION_FAILED;
+ case 413: return HTTP_STATUS_413_REQUEST_ENTITY_TOO_LARGE;
+ case 414: return HTTP_STATUS_414_REQUEST_URI_TOO_LARGE;
+ case 415: return HTTP_STATUS_415_UNSUPPORTED_MEDIA_TYPE;
+ case 416: return HTTP_STATUS_416_REQUESTED_RANGE_NOT_SATISFIED;
+ case 417: return HTTP_STATUS_417_EXPECTATION_FAILED;
+ case 500: return HTTP_STATUS_500_INTERNAL_SERVER_ERROR;
+ case 501: return HTTP_STATUS_501_NOT_IMPLEMENTED;
+ case 502: return HTTP_STATUS_502_BAD_GATEWAY;
+ case 503: return HTTP_STATUS_503_SERVICE_UNAVAILABLE;
+ case 504: return HTTP_STATUS_504_GATEWAY_TIME_OUT;
+ case 505: return HTTP_STATUS_505_HTTP_VERSION_NOT_SUPPORTED;
+ case 308: return HTTP_STATUS_308_PERMANENT_REDIRECT;
+ default: return HTTP_STATUS_UNSUPPORTED_STATUS;
+ }
+}
diff --git a/lib/efi_loader/efi_image_loader.c b/lib/efi_loader/efi_image_loader.c
index 0ddf69a..bb58cf1 100644
--- a/lib/efi_loader/efi_image_loader.c
+++ b/lib/efi_loader/efi_image_loader.c
@@ -13,6 +13,7 @@
#include <efi_loader.h>
#include <log.h>
#include <malloc.h>
+#include <mapmem.h>
#include <pe.h>
#include <sort.h>
#include <crypto/mscode.h>
@@ -977,7 +978,7 @@
}
/* Flush cache */
- flush_cache((ulong)efi_reloc,
+ flush_cache(map_to_sysmem(efi_reloc),
ALIGN(virt_size, EFI_CACHELINE_SIZE));
/*
diff --git a/lib/efi_loader/efi_ipconfig.c b/lib/efi_loader/efi_ipconfig.c
new file mode 100644
index 0000000..0b247a4
--- /dev/null
+++ b/lib/efi_loader/efi_ipconfig.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Implementation of EFI_IP4_CONFIG2_PROTOCOL
+ *
+ */
+
+#include <efi_loader.h>
+#include <image.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <net.h>
+
+static const efi_guid_t efi_ip4_config2_guid = EFI_IP4_CONFIG2_PROTOCOL_GUID;
+
+struct efi_ip4_config2_manual_address current_http_ip;
+static enum efi_ip4_config2_policy current_policy;
+static char current_mac_addr[32];
+
+/* EFI_IP4_CONFIG2_PROTOCOL */
+
+/*
+ * efi_ip4_config2_set_data() - Set the configuration for the EFI IPv4 network
+ * stack running on the communication device
+ *
+ * This function implements EFI_IP4_CONFIG2_PROTOCOL.SetData()
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data_type: the type of data to set
+ * @data_size: size of the buffer pointed to by data in bytes
+ * @data: the data buffer to set
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_ip4_config2_set_data(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ efi_uintn_t data_size,
+ void *data)
+{
+ EFI_ENTRY("%p, %d, %zu, %p", this, data_type, data_size, data);
+ efi_status_t ret = EFI_SUCCESS;
+
+ if (!this || (data && !data_size) || (!data && data_size))
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ switch (data_type) {
+ case EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO:
+ return EFI_EXIT(EFI_WRITE_PROTECTED);
+ case EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS:
+ if (current_policy != EFI_IP4_CONFIG2_POLICY_STATIC)
+ return EFI_EXIT(EFI_WRITE_PROTECTED);
+ if (!data_size && !data) {
+ memset((void *)¤t_http_ip, 0,
+ sizeof(current_http_ip));
+ return EFI_EXIT(EFI_SUCCESS);
+ }
+ if (data && data_size == sizeof(struct efi_ip4_config2_manual_address)) {
+ memcpy((void *)¤t_http_ip, data,
+ sizeof(struct efi_ip4_config2_manual_address));
+ efi_net_set_addr(¤t_http_ip.address,
+ ¤t_http_ip.subnet_mask, NULL);
+ return EFI_EXIT(EFI_SUCCESS);
+ }
+ return EFI_EXIT(EFI_BAD_BUFFER_SIZE);
+ case EFI_IP4_CONFIG2_DATA_TYPE_POLICY:
+ if (data && data_size == sizeof(enum efi_ip4_config2_policy)) {
+ current_policy = *(enum efi_ip4_config2_policy *)data;
+ return EFI_EXIT(EFI_SUCCESS);
+ }
+ return EFI_EXIT(EFI_BAD_BUFFER_SIZE);
+
+ default:
+ return EFI_EXIT(EFI_UNSUPPORTED);
+ }
+
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_ip4_config2_get_data() - Get the configuration for the EFI IPv4 network
+ * stack running on the communication device
+ *
+ * This function implements EFI_IP4_CONFIG2_PROTOCOL.GetData()
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data_type: the type of data to get
+ * @data_size: size
+ * @data: the data buffer
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_ip4_config2_get_data(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ efi_uintn_t *data_size,
+ void *data)
+{
+ EFI_ENTRY("%p, %d, %p, %p", this, data_type, data_size, data);
+
+ efi_status_t ret = EFI_SUCCESS;
+ struct efi_ip4_config2_interface_info *info;
+ int tmp;
+
+ if (!this || !data_size)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ if (*data_size && !data)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ tmp = sizeof(struct efi_ip4_config2_interface_info) + sizeof(struct efi_ip4_route_table);
+
+ switch (data_type) {
+ case EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO:
+ if (*data_size < tmp) {
+ *data_size = tmp;
+ return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
+ }
+
+ info = (struct efi_ip4_config2_interface_info *)data;
+ memset(info, 0, sizeof(*info));
+
+ info->hw_address_size = 6;
+ memcpy(info->hw_address.mac_addr, current_mac_addr, 6);
+ // Set the route table size
+
+ info->route_table_size = 0;
+ break;
+ case EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS:
+ if (*data_size < sizeof(struct efi_ip4_config2_manual_address)) {
+ *data_size = sizeof(struct efi_ip4_config2_manual_address);
+ return EFI_EXIT(EFI_BUFFER_TOO_SMALL);
+ }
+
+ efi_net_get_addr(¤t_http_ip.address, ¤t_http_ip.subnet_mask, NULL);
+ memcpy(data, (void *)¤t_http_ip,
+ sizeof(struct efi_ip4_config2_manual_address));
+
+ break;
+ default:
+ return EFI_EXIT(EFI_NOT_FOUND);
+ }
+ return EFI_EXIT(ret);
+}
+
+/*
+ * efi_ip4_config2_register_notify() - Register an event that is to be signaled whenever
+ * a configuration process on the specified configuration
+ * data is done
+ *
+ * This function implements EFI_IP4_CONFIG2_PROTOCOL.RegisterDataNotify()
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data_type: the type of data to register the event for
+ * @event: the event to register
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_ip4_config2_register_notify(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ struct efi_event *event)
+{
+ EFI_ENTRY("%p, %d, %p", this, data_type, event);
+
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+/*
+ * efi_ip4_config2_unregister_notify() - Remove a previously registered eventfor
+ * the specified configuration data
+ *
+ * This function implements EFI_IP4_CONFIG2_PROTOCOL.UnregisterDataNotify()
+ * See the Unified Extensible Firmware Interface
+ * (UEFI) specification for details.
+ *
+ * @this: pointer to the protocol instance
+ * @data_type: the type of data to remove the event for
+ * @event: the event to unregister
+ * Return: status code
+ */
+static efi_status_t EFIAPI efi_ip4_config2_unregister_notify(struct efi_ip4_config2_protocol *this,
+ enum efi_ip4_config2_data_type data_type,
+ struct efi_event *event)
+{
+ EFI_ENTRY("%p, %d, %p", this, data_type, event);
+
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+/**
+ * efi_ipconfig_register() - register the ip4_config2 protocol
+ *
+ */
+efi_status_t efi_ipconfig_register(const efi_handle_t handle,
+ struct efi_ip4_config2_protocol *ip4config)
+{
+ efi_status_t r = EFI_SUCCESS;
+
+ r = efi_add_protocol(handle, &efi_ip4_config2_guid,
+ ip4config);
+ if (r != EFI_SUCCESS) {
+ log_err("ERROR: Failure to add protocol\n");
+ return r;
+ }
+
+ memcpy(current_mac_addr, eth_get_ethaddr(), 6);
+
+ ip4config->set_data = efi_ip4_config2_set_data;
+ ip4config->get_data = efi_ip4_config2_get_data;
+ ip4config->register_data_notify = efi_ip4_config2_register_notify;
+ ip4config->unregister_data_notify = efi_ip4_config2_unregister_notify;
+
+ return EFI_SUCCESS;
+}
diff --git a/lib/efi_loader/efi_memory.c b/lib/efi_loader/efi_memory.c
index d2f5d56..edd7da7 100644
--- a/lib/efi_loader/efi_memory.c
+++ b/lib/efi_loader/efi_memory.c
@@ -451,7 +451,7 @@
enum efi_memory_type memory_type,
efi_uintn_t pages, uint64_t *memory)
{
- u64 len;
+ u64 efi_addr, len;
uint flags;
efi_status_t ret;
phys_addr_t addr;
@@ -499,14 +499,17 @@
return EFI_INVALID_PARAMETER;
}
- addr = (u64)(uintptr_t)map_sysmem(addr, 0);
+ efi_addr = (u64)(uintptr_t)map_sysmem(addr, 0);
/* Reserve that map in our memory maps */
- ret = efi_add_memory_map_pg(addr, pages, memory_type, true);
- if (ret != EFI_SUCCESS)
+ ret = efi_add_memory_map_pg(efi_addr, pages, memory_type, true);
+ if (ret != EFI_SUCCESS) {
/* Map would overlap, bail out */
+ lmb_free_flags(addr, (u64)pages << EFI_PAGE_SHIFT, flags);
+ unmap_sysmem((void *)(uintptr_t)efi_addr);
return EFI_OUT_OF_RESOURCES;
+ }
- *memory = addr;
+ *memory = efi_addr;
return EFI_SUCCESS;
}
@@ -546,6 +549,8 @@
if (status)
return EFI_NOT_FOUND;
+ unmap_sysmem((void *)(uintptr_t)memory);
+
return ret;
}
@@ -809,7 +814,16 @@
{
unsigned long runtime_start, runtime_end, runtime_pages;
unsigned long runtime_mask = EFI_PAGE_MASK;
+ unsigned long uboot_start, uboot_pages;
+ unsigned long uboot_stack_size = CONFIG_STACK_SIZE;
+ /* Add U-Boot */
+ uboot_start = ((uintptr_t)map_sysmem(gd->start_addr_sp, 0) -
+ uboot_stack_size) & ~EFI_PAGE_MASK;
+ uboot_pages = ((uintptr_t)map_sysmem(gd->ram_top - 1, 0) -
+ uboot_start + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
+ efi_add_memory_map_pg(uboot_start, uboot_pages, EFI_BOOT_SERVICES_CODE,
+ false);
#if defined(__aarch64__)
/*
* Runtime Services must be 64KiB aligned according to the
diff --git a/lib/efi_loader/efi_net.c b/lib/efi_loader/efi_net.c
index 7cd5367..67593ef 100644
--- a/lib/efi_loader/efi_net.c
+++ b/lib/efi_loader/efi_net.c
@@ -16,7 +16,10 @@
*/
#include <efi_loader.h>
+#include <dm.h>
+#include <linux/sizes.h>
#include <malloc.h>
+#include <vsprintf.h>
#include <net.h>
static const efi_guid_t efi_net_guid = EFI_SIMPLE_NETWORK_PROTOCOL_GUID;
@@ -32,6 +35,19 @@
static struct efi_net_obj *netobj;
/*
+ * The current network device path. This device path is updated when a new
+ * bootfile is downloaded from the network. If then the bootfile is loaded
+ * as an efi image, net_dp is passed as the device path of the loaded image.
+ */
+static struct efi_device_path *net_dp;
+
+static struct wget_http_info efi_wget_info = {
+ .set_bootdev = false,
+ .check_buffer_size = true,
+
+};
+
+/*
* The notification function of this event is called in every timer cycle
* to check if a new network packet has been received.
*/
@@ -44,11 +60,13 @@
/**
* struct efi_net_obj - EFI object representing a network interface
*
- * @header: EFI object header
- * @net: simple network protocol interface
- * @net_mode: status of the network interface
- * @pxe: PXE base code protocol interface
- * @pxe_mode: status of the PXE base code protocol
+ * @header: EFI object header
+ * @net: simple network protocol interface
+ * @net_mode: status of the network interface
+ * @pxe: PXE base code protocol interface
+ * @pxe_mode: status of the PXE base code protocol
+ * @ip4_config2: IP4 Config2 protocol interface
+ * @http_service_binding: Http service binding protocol interface
*/
struct efi_net_obj {
struct efi_object header;
@@ -56,6 +74,12 @@
struct efi_simple_network_mode net_mode;
struct efi_pxe_base_code_protocol pxe;
struct efi_pxe_mode pxe_mode;
+#if IS_ENABLED(CONFIG_EFI_IP4_CONFIG2_PROTOCOL)
+ struct efi_ip4_config2_protocol ip4_config2;
+#endif
+#if IS_ENABLED(CONFIG_EFI_HTTP_PROTOCOL)
+ struct efi_service_binding_protocol http_service_binding;
+#endif
};
/*
@@ -901,8 +925,10 @@
&netobj->net);
if (r != EFI_SUCCESS)
goto failure_to_add_protocol;
+ if (!net_dp)
+ efi_net_set_dp("Net", NULL);
r = efi_add_protocol(&netobj->header, &efi_guid_device_path,
- efi_dp_from_eth());
+ net_dp);
if (r != EFI_SUCCESS)
goto failure_to_add_protocol;
r = efi_add_protocol(&netobj->header, &efi_pxe_base_code_protocol_guid,
@@ -981,6 +1007,25 @@
return r;
}
+#if IS_ENABLED(CONFIG_EFI_IP4_CONFIG2_PROTOCOL)
+ r = efi_ipconfig_register(&netobj->header, &netobj->ip4_config2);
+ if (r != EFI_SUCCESS)
+ goto failure_to_add_protocol;
+#endif
+
+#ifdef CONFIG_EFI_HTTP_PROTOCOL
+ r = efi_http_register(&netobj->header, &netobj->http_service_binding);
+ if (r != EFI_SUCCESS)
+ goto failure_to_add_protocol;
+ /*
+ * No harm on doing the following. If the PXE handle is present, the client could
+ * find it and try to get its IP address from it. In here the PXE handle is present
+ * but the PXE protocol is not yet implmenented, so we add this in the meantime.
+ */
+ efi_net_get_addr((struct efi_ipv4_address *)&netobj->pxe_mode.station_ip,
+ (struct efi_ipv4_address *)&netobj->pxe_mode.subnet_mask, NULL);
+#endif
+
return EFI_SUCCESS;
failure_to_add_protocol:
printf("ERROR: Failure to add protocol\n");
@@ -997,3 +1042,317 @@
printf("ERROR: Out of memory\n");
return EFI_OUT_OF_RESOURCES;
}
+
+/**
+ * efi_net_set_dp() - set device path of efi net device
+ *
+ * This gets called to update the device path when a new boot
+ * file is downloaded
+ *
+ * @dev: dev to set the device path from
+ * @server: remote server address
+ * Return: status code
+ */
+efi_status_t efi_net_set_dp(const char *dev, const char *server)
+{
+ efi_free_pool(net_dp);
+
+ net_dp = NULL;
+ if (!strcmp(dev, "Net"))
+ net_dp = efi_dp_from_eth();
+ else if (!strcmp(dev, "Http"))
+ net_dp = efi_dp_from_http(server);
+
+ if (!net_dp)
+ return EFI_OUT_OF_RESOURCES;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ * efi_net_get_dp() - get device path of efi net device
+ *
+ * Produce a copy of the current device path
+ *
+ * @dp: copy of the current device path, or NULL on error
+ */
+void efi_net_get_dp(struct efi_device_path **dp)
+{
+ if (!dp)
+ return;
+ if (!net_dp)
+ efi_net_set_dp("Net", NULL);
+ if (net_dp)
+ *dp = efi_dp_dup(net_dp);
+}
+
+/**
+ * efi_net_get_addr() - get IP address information
+ *
+ * Copy the current IP address, mask, and gateway into the
+ * efi_ipv4_address structs pointed to by ip, mask and gw,
+ * respectively.
+ *
+ * @ip: pointer to an efi_ipv4_address struct to
+ * be filled with the current IP address
+ * @mask: pointer to an efi_ipv4_address struct to
+ * be filled with the current network mask
+ * @gw: pointer to an efi_ipv4_address struct to be
+ * filled with the current network gateway
+ */
+void efi_net_get_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw)
+{
+#ifdef CONFIG_NET_LWIP
+ char ipstr[] = "ipaddr\0\0";
+ char maskstr[] = "netmask\0\0";
+ char gwstr[] = "gatewayip\0\0";
+ int idx;
+ struct in_addr tmp;
+ char *env;
+
+ idx = dev_seq(eth_get_dev());
+
+ if (idx < 0 || idx > 99) {
+ log_err("unexpected idx %d\n", idx);
+ return;
+ }
+
+ if (idx) {
+ sprintf(ipstr, "ipaddr%d", idx);
+ sprintf(maskstr, "netmask%d", idx);
+ sprintf(gwstr, "gatewayip%d", idx);
+ }
+
+ env = env_get(ipstr);
+ if (env && ip) {
+ tmp = string_to_ip(env);
+ memcpy(ip, &tmp, sizeof(tmp));
+ }
+
+ env = env_get(maskstr);
+ if (env && mask) {
+ tmp = string_to_ip(env);
+ memcpy(mask, &tmp, sizeof(tmp));
+ }
+ env = env_get(gwstr);
+ if (env && gw) {
+ tmp = string_to_ip(env);
+ memcpy(gw, &tmp, sizeof(tmp));
+ }
+#else
+ if (ip)
+ memcpy(ip, &net_ip, sizeof(net_ip));
+ if (mask)
+ memcpy(mask, &net_netmask, sizeof(net_netmask));
+#endif
+}
+
+/**
+ * efi_net_set_addr() - set IP address information
+ *
+ * Set the current IP address, mask, and gateway to the
+ * efi_ipv4_address structs pointed to by ip, mask and gw,
+ * respectively.
+ *
+ * @ip: pointer to new IP address
+ * @mask: pointer to new network mask to set
+ * @gw: pointer to new network gateway
+ */
+void efi_net_set_addr(struct efi_ipv4_address *ip,
+ struct efi_ipv4_address *mask,
+ struct efi_ipv4_address *gw)
+{
+#ifdef CONFIG_NET_LWIP
+ char ipstr[] = "ipaddr\0\0";
+ char maskstr[] = "netmask\0\0";
+ char gwstr[] = "gatewayip\0\0";
+ int idx;
+ struct in_addr *addr;
+ char tmp[46];
+
+ idx = dev_seq(eth_get_dev());
+
+ if (idx < 0 || idx > 99) {
+ log_err("unexpected idx %d\n", idx);
+ return;
+ }
+
+ if (idx) {
+ sprintf(ipstr, "ipaddr%d", idx);
+ sprintf(maskstr, "netmask%d", idx);
+ sprintf(gwstr, "gatewayip%d", idx);
+ }
+
+ if (ip) {
+ addr = (struct in_addr *)ip;
+ ip_to_string(*addr, tmp);
+ env_set(ipstr, tmp);
+ }
+
+ if (mask) {
+ addr = (struct in_addr *)mask;
+ ip_to_string(*addr, tmp);
+ env_set(maskstr, tmp);
+ }
+
+ if (gw) {
+ addr = (struct in_addr *)gw;
+ ip_to_string(*addr, tmp);
+ env_set(gwstr, tmp);
+ }
+#else
+ if (ip)
+ memcpy(&net_ip, ip, sizeof(*ip));
+ if (mask)
+ memcpy(&net_netmask, mask, sizeof(*mask));
+#endif
+}
+
+/**
+ * efi_net_set_buffer() - allocate a buffer of min 64K
+ *
+ * @buffer: allocated buffer
+ * @size: desired buffer size
+ * Return: status code
+ */
+static efi_status_t efi_net_set_buffer(void **buffer, size_t size)
+{
+ efi_status_t ret = EFI_SUCCESS;
+
+ if (size < SZ_64K)
+ size = SZ_64K;
+
+ *buffer = efi_alloc(size);
+ if (!*buffer)
+ ret = EFI_OUT_OF_RESOURCES;
+
+ efi_wget_info.buffer_size = (ulong)size;
+
+ return ret;
+}
+
+/**
+ * efi_net_parse_headers() - parse HTTP headers
+ *
+ * Parses the raw buffer efi_wget_info.headers into an array headers
+ * of efi structs http_headers. The array should be at least
+ * MAX_HTTP_HEADERS long.
+ *
+ * @num_headers: number of headers
+ * @headers: caller provided array of struct http_headers
+ */
+void efi_net_parse_headers(ulong *num_headers, struct http_header *headers)
+{
+ if (!num_headers || !headers)
+ return;
+
+ // Populate info with http headers.
+ *num_headers = 0;
+ const uchar *line_start = efi_wget_info.headers;
+ const uchar *line_end;
+ ulong count;
+ struct http_header *current_header;
+ const uchar *separator;
+ size_t name_length, value_length;
+
+ // Skip the first line (request or status line)
+ line_end = strstr(line_start, "\r\n");
+
+ if (line_end)
+ line_start = line_end + 2;
+
+ while ((line_end = strstr(line_start, "\r\n")) != NULL) {
+ count = *num_headers;
+ if (line_start == line_end || count >= MAX_HTTP_HEADERS)
+ break;
+ current_header = headers + count;
+ separator = strchr(line_start, ':');
+ if (separator) {
+ name_length = separator - line_start;
+ ++separator;
+ while (*separator == ' ')
+ ++separator;
+ value_length = line_end - separator;
+ if (name_length < MAX_HTTP_HEADER_NAME &&
+ value_length < MAX_HTTP_HEADER_VALUE) {
+ strncpy(current_header->name, line_start, name_length);
+ current_header->name[name_length] = '\0';
+ strncpy(current_header->value, separator, value_length);
+ current_header->value[value_length] = '\0';
+ (*num_headers)++;
+ }
+ }
+ line_start = line_end + 2;
+ }
+}
+
+/**
+ * efi_net_do_request() - issue an HTTP request using wget
+ *
+ * @url: url
+ * @method: HTTP method
+ * @buffer: data buffer
+ * @status_code: HTTP status code
+ * @file_size: file size in bytes
+ * @headers_buffer: headers buffer
+ * Return: status code
+ */
+efi_status_t efi_net_do_request(u8 *url, enum efi_http_method method, void **buffer,
+ u32 *status_code, ulong *file_size, char *headers_buffer)
+{
+ efi_status_t ret = EFI_SUCCESS;
+ int wget_ret;
+ static bool last_head;
+
+ if (!buffer || !file_size)
+ return EFI_ABORTED;
+
+ efi_wget_info.method = (enum wget_http_method)method;
+ efi_wget_info.headers = headers_buffer;
+
+ switch (method) {
+ case HTTP_METHOD_GET:
+ ret = efi_net_set_buffer(buffer, last_head ? (size_t)efi_wget_info.hdr_cont_len : 0);
+ if (ret != EFI_SUCCESS)
+ goto out;
+ wget_ret = wget_request((ulong)*buffer, url, &efi_wget_info);
+ if ((ulong)efi_wget_info.hdr_cont_len > efi_wget_info.buffer_size) {
+ // Try again with updated buffer size
+ efi_free_pool(*buffer);
+ ret = efi_net_set_buffer(buffer, (size_t)efi_wget_info.hdr_cont_len);
+ if (ret != EFI_SUCCESS)
+ goto out;
+ if (wget_request((ulong)*buffer, url, &efi_wget_info)) {
+ efi_free_pool(*buffer);
+ ret = EFI_DEVICE_ERROR;
+ goto out;
+ }
+ } else if (wget_ret) {
+ efi_free_pool(*buffer);
+ ret = EFI_DEVICE_ERROR;
+ goto out;
+ }
+ // Pass the actual number of received bytes to the application
+ *file_size = efi_wget_info.file_size;
+ *status_code = efi_wget_info.status_code;
+ last_head = false;
+ break;
+ case HTTP_METHOD_HEAD:
+ ret = efi_net_set_buffer(buffer, 0);
+ if (ret != EFI_SUCCESS)
+ goto out;
+ wget_request((ulong)*buffer, url, &efi_wget_info);
+ *file_size = 0;
+ *status_code = efi_wget_info.status_code;
+ last_head = true;
+ break;
+ default:
+ ret = EFI_UNSUPPORTED;
+ break;
+ }
+
+out:
+ return ret;
+}
diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c
index 866a529..572c6b5 100644
--- a/lib/efi_loader/efi_tcg2.c
+++ b/lib/efi_loader/efi_tcg2.c
@@ -607,12 +607,9 @@
* Format"
*/
if (flags & PE_COFF_IMAGE) {
- IMAGE_NT_HEADERS32 *nt;
-
ret = efi_check_pe((void *)(uintptr_t)data_to_hash,
- data_to_hash_len, (void **)&nt);
+ data_to_hash_len, NULL);
if (ret != EFI_SUCCESS) {
- log_err("Not a valid PE-COFF file\n");
ret = EFI_UNSUPPORTED;
goto out;
}
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index 4147018..17fbfad 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -52,6 +52,8 @@
obj-$(CONFIG_EFI_ECPT) += efi_selftest_ecpt.o
obj-$(CONFIG_NETDEVICES) += efi_selftest_snp.o
+obj-$(CONFIG_EFI_HTTP_PROTOCOL) += efi_selftest_http.o
+obj-$(CONFIG_EFI_HTTP_PROTOCOL) += efi_selftest_ipconfig.o
obj-$(CONFIG_EFI_DEVICE_PATH_TO_TEXT) += efi_selftest_devicepath.o
obj-$(CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2) += \
diff --git a/lib/efi_selftest/efi_selftest_http.c b/lib/efi_selftest/efi_selftest_http.c
new file mode 100644
index 0000000..b63c401
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_http.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * efi_selftest_http
+ *
+ * This unit test covers the IPv4 Config2 Protocol, Http Service Binding Protocol,
+ * and Http Protocol.
+ *
+ * An Http HEAD and an Http GET request are sent to the same destination. The test
+ * is successful if the HEAD request gets a response with a valid Content-Length header
+ * and the subsequent GET request receives the amount of bytes informed by the previous
+ * Content-Length header.
+ *
+ */
+
+#include <efi_selftest.h>
+#include <charset.h>
+#include <net.h>
+
+static struct efi_boot_services *boottime;
+
+static struct efi_http_protocol *http;
+static struct efi_service_binding_protocol *http_service;
+static struct efi_ip4_config2_protocol *ip4_config2;
+static efi_handle_t http_protocol_handle;
+
+static const efi_guid_t efi_http_guid = EFI_HTTP_PROTOCOL_GUID;
+static const efi_guid_t efi_http_service_binding_guid = EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID;
+static const efi_guid_t efi_ip4_config2_guid = EFI_IP4_CONFIG2_PROTOCOL_GUID;
+static int callback_done;
+
+/*
+ * Setup unit test.
+ *
+ *
+ * @handle: handle of the loaded image
+ * @systable: system table
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ efi_status_t ret;
+ efi_handle_t *net_handle;
+ efi_uintn_t num_handles;
+ efi_handle_t *handles;
+ struct efi_http_config_data http_config;
+ struct efi_httpv4_access_point ipv4_node;
+
+ boottime = systable->boottime;
+
+ num_handles = 0;
+ boottime->locate_handle_buffer(BY_PROTOCOL, &efi_ip4_config2_guid,
+ NULL, &num_handles, &handles);
+
+ if (!num_handles) {
+ efi_st_error("Failed to locate ipv4 config2 protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ for (net_handle = handles; num_handles--; net_handle++) {
+ ret = boottime->open_protocol(*net_handle, &efi_ip4_config2_guid,
+ (void **)&ip4_config2, 0, 0,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (ret != EFI_SUCCESS || !ip4_config2)
+ continue;
+ ret = boottime->open_protocol(*net_handle,
+ &efi_http_service_binding_guid,
+ (void **)&http_service, 0, 0,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (ret != EFI_SUCCESS || !http_service)
+ continue;
+ break; // Get first handle that supports both protocols
+ }
+
+ if (!ip4_config2 || !http_service) {
+ efi_st_error("Failed to open ipv4 config2 or http service binding protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ http_protocol_handle = NULL;
+ ret = http_service->create_child(http_service, &http_protocol_handle);
+ if (ret != EFI_SUCCESS || !http_protocol_handle) {
+ efi_st_error("Failed to create an http service instance\n");
+ return EFI_ST_FAILURE;
+ }
+
+ ret = boottime->open_protocol(http_protocol_handle, &efi_http_guid,
+ (void **)&http, 0, 0, EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (ret != EFI_SUCCESS || !http) {
+ efi_st_error("Failed to open http protocol\n");
+ return EFI_ST_FAILURE;
+ }
+ efi_st_printf("HTTP Service Binding: child created successfully\n");
+
+ http_config.http_version = HTTPVERSION11;
+ http_config.is_ipv6 = false;
+ http_config.access_point.ipv4_node = &ipv4_node;
+ ipv4_node.use_default_address = true;
+
+ ret = http->configure(http, &http_config);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to configure http instance\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+void EFIAPI efi_test_http_callback(struct efi_event *event, void *context)
+{
+ callback_done = 1;
+}
+
+/*
+ * Execute unit test.
+ *
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+ efi_status_t ret;
+ struct efi_http_request_data request_data;
+ struct efi_http_message request_message;
+ struct efi_http_token request_token;
+ struct efi_http_response_data response_data;
+ struct efi_http_message response_message;
+ struct efi_http_token response_token;
+ enum efi_http_status_code status_code;
+ void *response_buffer;
+ efi_uintn_t len, sum;
+ char *url = "http://example.com/";
+ u16 url_16[64];
+ u16 *tmp;
+
+ /* Setup may have failed */
+ if (!ip4_config2 || !http) {
+ efi_st_error("Cannot proceed with test after setup failure\n");
+ return EFI_ST_FAILURE;
+ }
+
+ tmp = url_16;
+ utf8_utf16_strcpy(&tmp, url);
+ request_data.url = url_16;
+ request_data.method = HTTP_METHOD_GET;
+
+ request_message.data.request = &request_data;
+ request_message.header_count = 3;
+ request_message.body_length = 0;
+ request_message.body = NULL;
+
+ /* request token */
+ request_token.event = NULL;
+ request_token.status = EFI_NOT_READY;
+ request_token.message = &request_message;
+ callback_done = 0;
+ ret = boottime->create_event(EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ efi_test_http_callback,
+ NULL,
+ &request_token.event);
+
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to create request event\n");
+ return EFI_ST_FAILURE;
+ }
+
+ ret = http->request(http, &request_token);
+
+ if (ret != EFI_SUCCESS) {
+ boottime->close_event(request_token.event);
+ efi_st_printf("Failed to proceed with the http request\n");
+ return EFI_ST_SUCCESS;
+ }
+
+ while (!callback_done)
+ http->poll(http);
+
+ response_data.status_code = HTTP_STATUS_UNSUPPORTED_STATUS;
+ response_message.data.response = &response_data;
+ response_message.header_count = 0;
+ response_message.headers = NULL;
+ response_message.body_length = 0;
+ response_message.body = NULL;
+ response_token.event = NULL;
+
+ ret = boottime->create_event(EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ efi_test_http_callback,
+ NULL,
+ &response_token.event);
+
+ if (ret != EFI_SUCCESS) {
+ boottime->close_event(request_token.event);
+ efi_st_error("Failed to create response event\n");
+ return EFI_ST_FAILURE;
+ }
+
+ response_token.status = EFI_SUCCESS;
+ response_token.message = &response_message;
+
+ callback_done = 0;
+ ret = http->response(http, &response_token);
+
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed http first response\n");
+ goto fail;
+ }
+
+ while (!callback_done)
+ http->poll(http);
+
+ if (response_message.data.response->status_code != HTTP_STATUS_200_OK) {
+ status_code = response_message.data.response->status_code;
+ if (status_code == HTTP_STATUS_404_NOT_FOUND) {
+ efi_st_error("File not found\n");
+ } else {
+ efi_st_error("Bad http status %d\n",
+ response_message.data.response->status_code);
+ }
+ goto fail_free_hdr;
+ }
+
+ ret = boottime->allocate_pool(EFI_LOADER_CODE, response_message.body_length,
+ &response_buffer);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed allocating response buffer\n");
+ goto fail_free_hdr;
+ }
+
+ len = response_message.body_length;
+ sum = 0;
+ while (len) {
+ response_message.data.response = NULL;
+ response_message.header_count = 0;
+ response_message.headers = NULL;
+ response_message.body_length = len;
+ response_message.body = response_buffer + sum;
+
+ response_token.message = &response_message;
+ response_token.status = EFI_NOT_READY;
+
+ callback_done = 0;
+ ret = http->response(http, &response_token);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed http second response\n");
+ goto fail_free_buf;
+ }
+
+ while (!callback_done)
+ http->poll(http);
+
+ if (!response_message.body_length)
+ break;
+
+ len -= response_message.body_length;
+ sum += response_message.body_length;
+ }
+
+ if (len)
+ goto fail_free_buf;
+
+ boottime->free_pool(response_buffer);
+ if (response_message.headers)
+ boottime->free_pool(response_message.headers);
+ boottime->close_event(request_token.event);
+ boottime->close_event(response_token.event);
+ efi_st_printf("Efi Http request executed successfully\n");
+ return EFI_ST_SUCCESS;
+
+fail_free_buf:
+ boottime->free_pool(response_buffer);
+fail_free_hdr:
+ if (response_message.headers)
+ boottime->free_pool(response_message.headers);
+fail:
+ boottime->close_event(request_token.event);
+ boottime->close_event(response_token.event);
+ return EFI_ST_FAILURE;
+}
+
+/*
+ * Tear down unit test.
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int teardown(void)
+{
+ efi_status_t ret;
+ int exit_status = EFI_ST_SUCCESS;
+
+ if (!http_service || !http_protocol_handle) {
+ efi_st_error("No handles to destroy http instance");
+ exit_status = EFI_ST_FAILURE;
+ } else {
+ ret = http_service->destroy_child(http_service, http_protocol_handle);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to destroy http instance");
+ exit_status = EFI_ST_FAILURE;
+ }
+ efi_st_printf("HTTP Service Binding: child destroyed successfully\n");
+ }
+
+ return exit_status;
+}
+
+EFI_UNIT_TEST(http) = {
+ .name = "http protocol",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .teardown = teardown,
+#ifdef CONFIG_SANDBOX
+ /*
+ * Running this test on the sandbox requires setting environment
+ * variable ethact to a network interface connected to a DHCP server and
+ * ethrotate to 'no'.
+ */
+ .on_request = true,
+#endif
+};
diff --git a/lib/efi_selftest/efi_selftest_ipconfig.c b/lib/efi_selftest/efi_selftest_ipconfig.c
new file mode 100644
index 0000000..8d594f5
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_ipconfig.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * efi_selftest_ipconfig
+ *
+ * This unit test covers the IPv4 Config2 Protocol.
+ *
+ */
+
+#include <efi_selftest.h>
+#include <charset.h>
+#include <net.h>
+
+static struct efi_boot_services *boottime;
+
+static struct efi_ip4_config2_protocol *ip4_config2;
+static const efi_guid_t efi_ip4_config2_guid = EFI_IP4_CONFIG2_PROTOCOL_GUID;
+
+/*
+ * Setup unit test.
+ *
+ * Open IPv4 Config2 protocol
+ *
+ * @handle: handle of the loaded image
+ * @systable: system table
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ efi_status_t ret;
+ efi_handle_t *net_handle;
+ efi_uintn_t num_handles;
+ efi_handle_t *handles;
+
+ boottime = systable->boottime;
+
+ num_handles = 0;
+ boottime->locate_handle_buffer(BY_PROTOCOL, &efi_ip4_config2_guid,
+ NULL, &num_handles, &handles);
+
+ if (!num_handles) {
+ efi_st_error("Failed to locate ipv4 config2 protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ for (net_handle = handles; num_handles--; net_handle++) {
+ ret = boottime->open_protocol(*net_handle, &efi_ip4_config2_guid,
+ (void **)&ip4_config2, 0, 0,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (ret != EFI_SUCCESS || !ip4_config2)
+ continue;
+ break; // Get first handle that supports ipv4
+ }
+
+ if (!ip4_config2) {
+ efi_st_error("Failed to open ipv4 config2 protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Execute unit test.
+ *
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+ efi_status_t ret;
+ enum efi_ip4_config2_policy policy;
+ efi_uintn_t data_size;
+ struct efi_ip4_config2_manual_address manual_address;
+ struct efi_ip4_config2_manual_address orig_address;
+ u8 netmask[] = {255, 255, 255, 0};
+ u8 ip[] = {10, 0, 0, 1};
+
+ /* Setup may have failed */
+ if (!ip4_config2) {
+ efi_st_error("Setup failure, cannot proceed with test\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Set policy to static */
+ policy = EFI_IP4_CONFIG2_POLICY_STATIC;
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_POLICY,
+ sizeof(policy), (void *)&policy);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to set policy\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Save original ip address and netmask */
+ data_size = sizeof(manual_address);
+ ret = ip4_config2->get_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ &data_size, &orig_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to save original ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Set static ip and netmask */
+ memcpy(&manual_address.address, ip,
+ sizeof(struct efi_ipv4_address));
+ memcpy(&manual_address.subnet_mask, netmask,
+ sizeof(struct efi_ipv4_address));
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ sizeof(manual_address), &manual_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to get ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Try to set interface info, this should fail */
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO, 0, NULL);
+ if (ret == EFI_SUCCESS) {
+ efi_st_error("Interface info is read-only\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Get ip address and netmask and check that they match with the previously set ones */
+ data_size = sizeof(manual_address);
+ ret = ip4_config2->get_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ &data_size, &manual_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to get ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+ if (memcmp(ip, &manual_address.address,
+ sizeof(struct efi_ipv4_address)) ||
+ memcmp(netmask, &manual_address.subnet_mask,
+ sizeof(struct efi_ipv4_address))) {
+ efi_st_error("Ip address mismatch\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Restore original ip address and netmask */
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ sizeof(orig_address), &orig_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to restore original ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ efi_st_printf("Efi ipconfig test execute succeeded\n");
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Tear down unit test.
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int teardown(void)
+{
+ int exit_status = EFI_ST_SUCCESS;
+
+ return exit_status;
+}
+
+EFI_UNIT_TEST(ipconfig) = {
+ .name = "IPv4 config2 protocol",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .teardown = teardown,
+#ifdef CONFIG_SANDBOX
+ /*
+ * Running this test on the sandbox requires setting environment
+ * variable ethact to a network interface connected to a DHCP server and
+ * ethrotate to 'no'.
+ */
+ .on_request = true,
+#endif
+};
diff --git a/lib/hashtable.c b/lib/hashtable.c
index e8a59e2..75c263b 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -221,11 +221,32 @@
do_callback(const struct env_entry *e, const char *name, const char *value,
enum env_op op, int flags)
{
+ int ret = 0;
+
#ifndef CONFIG_XPL_BUILD
- if (e->callback)
- return e->callback(name, value, op, flags);
+ static bool in_callback;
+
+ if (!e->callback || in_callback)
+ return 0;
+
+ /*
+ * In case there are two variables which each implement env callback
+ * that performs env_set() on the other variable, the callbacks will
+ * call each other recursively until the stack runs out. Prevent such
+ * a recursion from happening.
+ *
+ * Example which triggers this behavior:
+ * static int on_foo(...) { env_set("bar", 0); ... }
+ * static int on_bar(...) { env_set("foo", 0); ... }
+ * U_BOOT_ENV_CALLBACK(foo, on_foo);
+ * U_BOOT_ENV_CALLBACK(bar, on_bar);
+ */
+ in_callback = true;
+ ret = e->callback(name, value, op, flags);
+ in_callback = false;
#endif
- return 0;
+
+ return ret;
}
/*
diff --git a/lib/lmb.c b/lib/lmb.c
index 14b9b84..b03237b 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -201,15 +201,6 @@
phys_addr_t rgnbase = rgn[i].base;
phys_size_t rgnsize = rgn[i].size;
phys_size_t rgnflags = rgn[i].flags;
- phys_addr_t end = base + size - 1;
- phys_addr_t rgnend = rgnbase + rgnsize - 1;
- if (rgnbase <= base && end <= rgnend) {
- if (flags == rgnflags)
- /* Already have this region, so we're done */
- return 0;
- else
- return -1; /* regions with new flags */
- }
ret = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
if (ret > 0) {
@@ -615,6 +606,7 @@
void lmb_add_memory(void)
{
int i;
+ phys_addr_t bank_end;
phys_size_t size;
u64 ram_top = gd->ram_top;
struct bd_info *bd = gd->bd;
@@ -628,6 +620,8 @@
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
size = bd->bi_dram[i].size;
+ bank_end = bd->bi_dram[i].start + size;
+
if (size) {
lmb_add(bd->bi_dram[i].start, size);
@@ -639,6 +633,9 @@
if (bd->bi_dram[i].start >= ram_top)
lmb_reserve_flags(bd->bi_dram[i].start, size,
LMB_NOOVERWRITE);
+ else if (bank_end > ram_top)
+ lmb_reserve_flags(ram_top, bank_end - ram_top,
+ LMB_NOOVERWRITE);
}
}
}
diff --git a/lib/lwip/Makefile b/lib/lwip/Makefile
index 19e5c68..fe2b64c 100644
--- a/lib/lwip/Makefile
+++ b/lib/lwip/Makefile
@@ -54,5 +54,5 @@
lwip/src/core/udp.o \
lwip/src/netif/ethernet.o
-obj-$(CONFIG_MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
+obj-$(CONFIG_$(XPL_)MBEDTLS_LIB_TLS) += lwip/src/apps/altcp_tls/altcp_tls_mbedtls.o \
lwip/src/apps/altcp_tls/altcp_tls_mbedtls_mem.o
diff --git a/lib/lwip/lwip/src/apps/altcp_tls/altcp_tls_mbedtls.c b/lib/lwip/lwip/src/apps/altcp_tls/altcp_tls_mbedtls.c
index 6643b05..4642158 100644
--- a/lib/lwip/lwip/src/apps/altcp_tls/altcp_tls_mbedtls.c
+++ b/lib/lwip/lwip/src/apps/altcp_tls/altcp_tls_mbedtls.c
@@ -692,7 +692,9 @@
if (session && conn && conn->state) {
altcp_mbedtls_state_t *state = (altcp_mbedtls_state_t *)conn->state;
int ret = -1;
+#ifdef MBEDTLS_HAVE_TIME
if (session->data.MBEDTLS_PRIVATE(start))
+#endif
ret = mbedtls_ssl_set_session(&state->ssl_context, &session->data);
return ret < 0 ? ERR_VAL : ERR_OK;
}
diff --git a/lib/lwip/u-boot/lwipopts.h b/lib/lwip/u-boot/lwipopts.h
index 88d6faf..edac74f 100644
--- a/lib/lwip/u-boot/lwipopts.h
+++ b/lib/lwip/u-boot/lwipopts.h
@@ -5,6 +5,8 @@
#ifndef LWIP_UBOOT_LWIPOPTS_H
#define LWIP_UBOOT_LWIPOPTS_H
+#include <linux/kconfig.h>
+
#if defined(CONFIG_LWIP_DEBUG)
#define LWIP_DEBUG 1
#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
@@ -154,7 +156,7 @@
#define MEMP_MEM_INIT 1
#define MEM_LIBC_MALLOC 1
-#if defined(CONFIG_MBEDTLS_LIB_TLS)
+#if CONFIG_IS_ENABLED(MBEDTLS_LIB_TLS)
#define LWIP_ALTCP 1
#define LWIP_ALTCP_TLS 1
#define LWIP_ALTCP_TLS_MBEDTLS 1
diff --git a/lib/mbedtls/mbedtls_def_config.h b/lib/mbedtls/mbedtls_def_config.h
index d27f017..1d2314e 100644
--- a/lib/mbedtls/mbedtls_def_config.h
+++ b/lib/mbedtls/mbedtls_def_config.h
@@ -92,9 +92,6 @@
/* Generic options */
#define MBEDTLS_ENTROPY_HARDWARE_ALT
-#define MBEDTLS_HAVE_TIME
-#define MBEDTLS_PLATFORM_MS_TIME_ALT
-#define MBEDTLS_PLATFORM_TIME_MACRO rtc_mktime
#define MBEDTLS_PLATFORM_C
#define MBEDTLS_SSL_CLI_C
#define MBEDTLS_SSL_TLS_C
diff --git a/lib/md5.c b/lib/md5.c
index 2d8977b..e3eab8a 100644
--- a/lib/md5.c
+++ b/lib/md5.c
@@ -272,14 +272,16 @@
unsigned int chunk_sz)
{
MD5Context context;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
const unsigned char *end, *curr;
int chunk;
#endif
MD5Init(&context);
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
curr = input;
end = input + len;
while (curr < end) {
diff --git a/lib/net_utils.c b/lib/net_utils.c
index c70fef0..621f651 100644
--- a/lib/net_utils.c
+++ b/lib/net_utils.c
@@ -152,6 +152,17 @@
}
#endif
+void ip_to_string(struct in_addr x, char *s)
+{
+ x.s_addr = ntohl(x.s_addr);
+ sprintf(s, "%d.%d.%d.%d",
+ (int) ((x.s_addr >> 24) & 0xff),
+ (int) ((x.s_addr >> 16) & 0xff),
+ (int) ((x.s_addr >> 8) & 0xff),
+ (int) ((x.s_addr >> 0) & 0xff)
+ );
+}
+
void string_to_enetaddr(const char *addr, uint8_t *enetaddr)
{
char *end;
diff --git a/lib/sha1.c b/lib/sha1.c
index a9d6497..be502c6 100644
--- a/lib/sha1.c
+++ b/lib/sha1.c
@@ -312,14 +312,16 @@
unsigned char *output, unsigned int chunk_sz)
{
sha1_context ctx;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
const unsigned char *end, *curr;
int chunk;
#endif
sha1_starts (&ctx);
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
curr = input;
end = input + ilen;
while (curr < end) {
diff --git a/lib/sha256.c b/lib/sha256.c
index 329802f..fb195d9 100644
--- a/lib/sha256.c
+++ b/lib/sha256.c
@@ -273,7 +273,8 @@
unsigned char *output, unsigned int chunk_sz)
{
sha256_context ctx;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
const unsigned char *end;
unsigned char *curr;
int chunk;
@@ -281,7 +282,8 @@
sha256_starts(&ctx);
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
curr = (unsigned char *)input;
end = input + ilen;
while (curr < end) {
diff --git a/lib/sha512.c b/lib/sha512.c
index ea555ff..0e75c1a 100644
--- a/lib/sha512.c
+++ b/lib/sha512.c
@@ -288,7 +288,8 @@
unsigned char *output, unsigned int chunk_sz)
{
sha512_context ctx;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
const unsigned char *end;
unsigned char *curr;
int chunk;
@@ -296,7 +297,8 @@
sha384_starts(&ctx);
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
curr = (unsigned char *)input;
end = input + ilen;
while (curr < end) {
@@ -351,7 +353,8 @@
unsigned char *output, unsigned int chunk_sz)
{
sha512_context ctx;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
const unsigned char *end;
unsigned char *curr;
int chunk;
@@ -359,7 +362,8 @@
sha512_starts(&ctx);
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+#if !defined(USE_HOSTCC) && \
+ (defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG))
curr = (unsigned char *)input;
end = input + ilen;
while (curr < end) {
diff --git a/lib/smbios.c b/lib/smbios.c
index 7c24ea1..a36d4b4 100644
--- a/lib/smbios.c
+++ b/lib/smbios.c
@@ -270,7 +270,7 @@
static int smbios_add_prop(struct smbios_ctx *ctx, const char *prop,
const char *dval)
{
- return smbios_add_prop_si(ctx, prop, SYSINFO_ID_NONE, dval);
+ return smbios_add_prop_si(ctx, prop, SYSID_NONE, dval);
}
static void smbios_set_eos(struct smbios_ctx *ctx, char *eos)
@@ -393,27 +393,27 @@
fill_smbios_header(t, SMBIOS_SYSTEM_INFORMATION, len, handle);
smbios_set_eos(ctx, t->eos);
t->manufacturer = smbios_add_prop_si(ctx, "manufacturer",
- SYSINFO_ID_SMBIOS_SYSTEM_MANUFACTURER,
+ SYSID_SM_SYSTEM_MANUFACTURER,
NULL);
t->product_name = smbios_add_prop_si(ctx, "product",
- SYSINFO_ID_SMBIOS_SYSTEM_PRODUCT,
+ SYSID_SM_SYSTEM_PRODUCT,
NULL);
t->version = smbios_add_prop_si(ctx, "version",
- SYSINFO_ID_SMBIOS_SYSTEM_VERSION,
+ SYSID_SM_SYSTEM_VERSION,
NULL);
if (serial_str) {
t->serial_number = smbios_add_prop(ctx, NULL, serial_str);
strncpy((char *)t->uuid, serial_str, sizeof(t->uuid));
} else {
t->serial_number = smbios_add_prop_si(ctx, "serial",
- SYSINFO_ID_SMBIOS_SYSTEM_SERIAL,
+ SYSID_SM_SYSTEM_SERIAL,
NULL);
}
t->wakeup_type = SMBIOS_WAKEUP_TYPE_UNKNOWN;
t->sku_number = smbios_add_prop_si(ctx, "sku",
- SYSINFO_ID_SMBIOS_SYSTEM_SKU, NULL);
+ SYSID_SM_SYSTEM_SKU, NULL);
t->family = smbios_add_prop_si(ctx, "family",
- SYSINFO_ID_SMBIOS_SYSTEM_FAMILY, NULL);
+ SYSID_SM_SYSTEM_FAMILY, NULL);
len = t->length + smbios_string_table_len(ctx);
*current += len;
@@ -433,20 +433,20 @@
fill_smbios_header(t, SMBIOS_BOARD_INFORMATION, len, handle);
smbios_set_eos(ctx, t->eos);
t->manufacturer = smbios_add_prop_si(ctx, "manufacturer",
- SYSINFO_ID_SMBIOS_BASEBOARD_MANUFACTURER,
+ SYSID_SM_BASEBOARD_MANUFACTURER,
NULL);
t->product_name = smbios_add_prop_si(ctx, "product",
- SYSINFO_ID_SMBIOS_BASEBOARD_PRODUCT,
+ SYSID_SM_BASEBOARD_PRODUCT,
NULL);
t->version = smbios_add_prop_si(ctx, "version",
- SYSINFO_ID_SMBIOS_BASEBOARD_VERSION,
+ SYSID_SM_BASEBOARD_VERSION,
NULL);
t->serial_number = smbios_add_prop_si(ctx, "serial",
- SYSINFO_ID_SMBIOS_BASEBOARD_SERIAL,
+ SYSID_SM_BASEBOARD_SERIAL,
NULL);
t->asset_tag_number = smbios_add_prop_si(ctx, "asset-tag",
- SYSINFO_ID_SMBIOS_BASEBOARD_ASSET_TAG,
+ SYSID_SM_BASEBOARD_ASSET_TAG,
NULL);
t->feature_flags = SMBIOS_BOARD_FEATURE_HOSTING;
t->board_type = SMBIOS_BOARD_MOTHERBOARD;
diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c
index cc1dfe6..0503c17 100644
--- a/lib/tiny-printf.c
+++ b/lib/tiny-printf.c
@@ -312,7 +312,7 @@
*info->bf = 0;
info->bf = p;
- while (*info->bf++ && width > 0)
+ while (width > 0 && info->bf && *info->bf++)
width--;
while (width-- > 0)
info->putc(info, lz ? '0' : ' ');
diff --git a/lib/uuid.c b/lib/uuid.c
index 538a1ba..97388f5 100644
--- a/lib/uuid.c
+++ b/lib/uuid.c
@@ -175,6 +175,20 @@
"Firmware Management",
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID
},
+#if IS_ENABLED(CONFIG_EFI_HTTP_PROTOCOL)
+ {
+ "HTTP",
+ EFI_HTTP_PROTOCOL_GUID,
+ },
+ {
+ "HTTP Service Binding",
+ EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID,
+ },
+ {
+ "IPv4 Config2",
+ EFI_IP4_CONFIG2_PROTOCOL_GUID,
+ },
+#endif
/* Configuration table GUIDs */
{
"ACPI table",
diff --git a/net/Kconfig b/net/Kconfig
index 76ab7d9..b4bb68d 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -244,6 +244,15 @@
generated. It will be saved to the appropriate environment variable,
too.
+config WGET
+ bool "Enable wget"
+ select PROT_TCP if NET
+ select PROT_TCP_LWIP if NET_LWIP
+ select PROT_DNS_LWIP if NET_LWIP
+ help
+ Selecting this will enable wget, an interface to send HTTP requests
+ via the network stack.
+
config TFTP_BLOCKSIZE
int "TFTP block size"
default 1468
diff --git a/net/Makefile b/net/Makefile
index 209377a..7c917b3 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_PROT_UDP) += udp.o
obj-$(CONFIG_PROT_TCP) += tcp.o
-obj-$(CONFIG_CMD_WGET) += wget.o
+obj-$(CONFIG_WGET) += wget.o
# Disable this warning as it is triggered by:
# sprintf(buf, index ? "foo%d" : "foo", index)
diff --git a/net/lwip/Makefile b/net/lwip/Makefile
index f2558f8..79dd6b3 100644
--- a/net/lwip/Makefile
+++ b/net/lwip/Makefile
@@ -5,4 +5,4 @@
obj-$(CONFIG_CMD_DNS) += dns.o
obj-$(CONFIG_CMD_PING) += ping.o
obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o
-obj-$(CONFIG_CMD_WGET) += wget.o
+obj-$(CONFIG_WGET) += wget.o
diff --git a/net/lwip/dhcp.c b/net/lwip/dhcp.c
index 23b5622..9b882cf 100644
--- a/net/lwip/dhcp.c
+++ b/net/lwip/dhcp.c
@@ -27,9 +27,9 @@
static int dhcp_loop(struct udevice *udev)
{
- char *ipstr = "ipaddr\0\0";
- char *maskstr = "netmask\0\0";
- char *gwstr = "gatewayip\0\0";
+ char ipstr[] = "ipaddr\0\0";
+ char maskstr[] = "netmask\0\0";
+ char gwstr[] = "gatewayip\0\0";
unsigned long start;
struct netif *netif;
struct dhcp *dhcp;
@@ -111,9 +111,21 @@
int do_dhcp(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
+ int ret;
+
eth_set_current();
+ ret = dhcp_loop(eth_get_dev());
+ if (ret)
+ return ret;
+
+ if (argc > 1) {
+ struct cmd_tbl cmdtp = {};
+
- return dhcp_loop(eth_get_dev());
+ return do_tftpb(&cmdtp, 0, argc, argv);
+ }
+
+ return CMD_RET_SUCCESS;
}
int dhcp_run(ulong addr, const char *fname, bool autoload)
diff --git a/net/lwip/net-lwip.c b/net/lwip/net-lwip.c
index 4702177..b863047 100644
--- a/net/lwip/net-lwip.c
+++ b/net/lwip/net-lwip.c
@@ -91,9 +91,9 @@
static int get_udev_ipv4_info(struct udevice *dev, ip4_addr_t *ip,
ip4_addr_t *mask, ip4_addr_t *gw)
{
- char *ipstr = "ipaddr\0\0";
- char *maskstr = "netmask\0\0";
- char *gwstr = "gatewayip\0\0";
+ char ipstr[] = "ipaddr\0\0";
+ char maskstr[] = "netmask\0\0";
+ char gwstr[] = "gatewayip\0\0";
int idx = dev_seq(dev);
char *env;
diff --git a/net/lwip/wget.c b/net/lwip/wget.c
index e85d57b..b76f6c0 100644
--- a/net/lwip/wget.c
+++ b/net/lwip/wget.c
@@ -27,6 +27,8 @@
};
struct wget_ctx {
+ char server_name[SERVER_NAME_SIZE];
+ u16 port;
char *path;
ulong daddr;
ulong saved_daddr;
@@ -36,13 +38,29 @@
enum done_state done;
};
+static void wget_lwip_fill_info(struct pbuf *hdr, u16_t hdr_len, u32_t hdr_cont_len)
+{
+ if (wget_info->headers) {
+ if (hdr_len < MAX_HTTP_HEADERS_SIZE)
+ pbuf_copy_partial(hdr, (void *)wget_info->headers, hdr_len, 0);
+ else
+ hdr_len = 0;
+ wget_info->headers[hdr_len] = 0;
+ }
+ wget_info->hdr_cont_len = (u32)hdr_cont_len;
+}
+
+static void wget_lwip_set_file_size(u32_t rx_content_len)
+{
+ wget_info->file_size = (ulong)rx_content_len;
+}
+
bool wget_validate_uri(char *uri);
int mbedtls_hardware_poll(void *data, unsigned char *output, size_t len,
size_t *olen)
{
struct udevice *dev;
- u64 rng = 0;
int ret;
*olen = 0;
@@ -52,12 +70,11 @@
log_err("Failed to get an rng: %d\n", ret);
return ret;
}
- ret = dm_rng_read(dev, &rng, sizeof(rng));
+ ret = dm_rng_read(dev, output, len);
if (ret)
return ret;
- memcpy(output, &rng, len);
- *olen = sizeof(rng);
+ *olen = len;
return 0;
}
@@ -163,7 +180,7 @@
if (rem < n)
return -1;
- strlcpy(p, server, n);
+ strncpy(p, server, n);
p += n;
rem -= n;
if (rem < 1)
@@ -174,7 +191,7 @@
n = strlen(path);
if (rem < n)
return -1;
- strlcpy(p, path, n);
+ strncpy(p, path, n);
p += n;
rem -= n;
if (rem < 1)
@@ -217,6 +234,13 @@
struct wget_ctx *ctx = arg;
ulong elapsed;
+ wget_info->status_code = (u32)srv_res;
+
+ if (err == ERR_BUF) {
+ ctx->done = FAILURE;
+ return;
+ }
+
if (httpc_result != HTTPC_RESULT_OK) {
log_err("\nHTTP client error %d\n", httpc_result);
ctx->done = FAILURE;
@@ -236,8 +260,10 @@
printf("%u bytes transferred in %lu ms (", rx_content_len, elapsed);
print_size(rx_content_len / elapsed * 1000, "/s)\n");
printf("Bytes transferred = %lu (%lx hex)\n", ctx->size, ctx->size);
- efi_set_bootdev("Net", "", ctx->path, map_sysmem(ctx->saved_daddr, 0),
- rx_content_len);
+ if (wget_info->set_bootdev)
+ efi_set_bootdev("Http", ctx->server_name, ctx->path, map_sysmem(ctx->saved_daddr, 0),
+ rx_content_len);
+ wget_lwip_set_file_size(rx_content_len);
if (env_set_hex("filesize", rx_content_len) ||
env_set_hex("fileaddr", ctx->saved_daddr)) {
log_err("Could not set filesize or fileaddr\n");
@@ -248,9 +274,19 @@
ctx->done = SUCCESS;
}
+static err_t httpc_headers_done_cb(httpc_state_t *connection, void *arg, struct pbuf *hdr,
+ u16_t hdr_len, u32_t content_len)
+{
+ wget_lwip_fill_info(hdr, hdr_len, content_len);
+
+ if (wget_info->check_buffer_size && (ulong)content_len > wget_info->buffer_size)
+ return ERR_BUF;
+
+ return ERR_OK;
+}
+
static int wget_loop(struct udevice *udev, ulong dst_addr, char *uri)
{
- char server_name[SERVER_NAME_SIZE];
#if defined CONFIG_WGET_HTTPS
altcp_allocator_t tls_allocator;
#endif
@@ -259,7 +295,6 @@
struct netif *netif;
struct wget_ctx ctx;
char *path;
- u16 port;
bool is_https;
ctx.daddr = dst_addr;
@@ -269,7 +304,7 @@
ctx.prevsize = 0;
ctx.start_time = 0;
- if (parse_url(uri, server_name, &port, &path, &is_https))
+ if (parse_url(uri, ctx.server_name, &ctx.port, &path, &is_https))
return CMD_RET_USAGE;
netif = net_lwip_new_netif(udev);
@@ -281,7 +316,7 @@
if (is_https) {
tls_allocator.alloc = &altcp_tls_alloc;
tls_allocator.arg =
- altcp_tls_create_config_client(NULL, 0, server_name);
+ altcp_tls_create_config_client(NULL, 0, ctx.server_name);
if (!tls_allocator.arg) {
log_err("error: Cannot create a TLS connection\n");
@@ -294,8 +329,9 @@
#endif
conn.result_fn = httpc_result_cb;
+ conn.headers_done_fn = httpc_headers_done_cb;
ctx.path = path;
- if (httpc_get_file_dns(server_name, port, path, &conn, httpc_recv_cb,
+ if (httpc_get_file_dns(ctx.server_name, ctx.port, path, &conn, httpc_recv_cb,
&ctx, &state)) {
net_lwip_remove_netif(netif);
return CMD_RET_FAILURE;
@@ -316,10 +352,13 @@
return -1;
}
-int wget_with_dns(ulong dst_addr, char *uri)
+int wget_do_request(ulong dst_addr, char *uri)
{
eth_set_current();
+ if (!wget_info)
+ wget_info = &default_wget_info;
+
return wget_loop(eth_get_dev(), dst_addr, uri);
}
@@ -346,7 +385,8 @@
if (parse_legacy_arg(url, nurl, sizeof(nurl)))
return CMD_RET_FAILURE;
- if (wget_with_dns(dst_addr, nurl))
+ wget_info = &default_wget_info;
+ if (wget_do_request(dst_addr, nurl))
return CMD_RET_FAILURE;
return CMD_RET_SUCCESS;
diff --git a/net/net-common.c b/net/net-common.c
index a7f767d..e01b0da 100644
--- a/net/net-common.c
+++ b/net/net-common.c
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
+#include <net-common.h>
void copy_filename(char *dst, const char *src, int size)
{
@@ -11,3 +12,16 @@
*dst++ = *src++;
*dst = '\0';
}
+
+struct wget_http_info default_wget_info = {
+ .method = WGET_HTTP_METHOD_GET,
+ .set_bootdev = true,
+};
+
+struct wget_http_info *wget_info;
+
+int wget_request(ulong dst_addr, char *uri, struct wget_http_info *info)
+{
+ wget_info = info ? info : &default_wget_info;
+ return wget_do_request(dst_addr, uri);
+}
diff --git a/net/net.c b/net/net.c
index f47e9fb..ca35704 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1723,17 +1723,6 @@
return 1;
}
-void ip_to_string(struct in_addr x, char *s)
-{
- x.s_addr = ntohl(x.s_addr);
- sprintf(s, "%d.%d.%d.%d",
- (int) ((x.s_addr >> 24) & 0xff),
- (int) ((x.s_addr >> 16) & 0xff),
- (int) ((x.s_addr >> 8) & 0xff),
- (int) ((x.s_addr >> 0) & 0xff)
- );
-}
-
void vlan_to_string(ushort x, char *s)
{
x = ntohs(x);
diff --git a/net/wget.c b/net/wget.c
index 361817a..d338eaf 100644
--- a/net/wget.c
+++ b/net/wget.c
@@ -22,10 +22,11 @@
/* The default, change with environment variable 'httpdstp' */
#define SERVER_PORT 80
-static const char bootfile1[] = "GET ";
+static const char bootfileGET[] = "GET ";
+static const char bootfileHEAD[] = "HEAD ";
static const char bootfile3[] = " HTTP/1.0\r\n\r\n";
static const char http_eom[] = "\r\n\r\n";
-static const char http_ok[] = "200";
+static const char content_len[] = "Content-Length";
static const char linefeed[] = "\r\n";
static struct in_addr web_server_ip;
static int our_port;
@@ -45,6 +46,7 @@
#define PKTQ_SZ (PKTBUFSRX / 4)
static struct pkt_qd pkt_q[PKTQ_SZ];
static int pkt_q_idx;
+static unsigned long content_length;
static unsigned int packets;
static unsigned int initial_data_seq_num;
@@ -75,7 +77,7 @@
ulong newsize = offset + len;
uchar *ptr;
- if (CONFIG_IS_ENABLED(LMB)) {
+ if (CONFIG_IS_ENABLED(LMB) && wget_info->set_bootdev) {
if (store_addr < image_load_addr ||
lmb_read_check(store_addr, len)) {
printf("\nwget error: ");
@@ -130,8 +132,17 @@
IP_TCP_HDR_SIZE + TCP_TSOPT_SIZE + 2;
offset = ptr;
- memcpy(offset, &bootfile1, strlen(bootfile1));
- offset += strlen(bootfile1);
+ switch (wget_info->method) {
+ case WGET_HTTP_METHOD_HEAD:
+ memcpy(offset, &bootfileHEAD, strlen(bootfileHEAD));
+ offset += strlen(bootfileHEAD);
+ break;
+ case WGET_HTTP_METHOD_GET:
+ default:
+ memcpy(offset, &bootfileGET, strlen(bootfileGET));
+ offset += strlen(bootfileGET);
+ break;
+ }
memcpy(offset, image_url, strlen(image_url));
offset += strlen(image_url);
@@ -191,6 +202,52 @@
#define PKT_QUEUE_OFFSET 0x20000
#define PKT_QUEUE_PACKET_SIZE 0x800
+static void wget_fill_info(const uchar *pkt, int hlen)
+{
+ const char *first_space;
+ const char *second_space;
+ char *pos, *end;
+
+ if (wget_info->headers) {
+ if (hlen < MAX_HTTP_HEADERS_SIZE)
+ strncpy(wget_info->headers, pkt, hlen);
+ else
+ hlen = 0;
+ wget_info->headers[hlen] = 0;
+ }
+
+ //Get status code
+ first_space = strchr(pkt, ' ');
+ if (!first_space) {
+ wget_info->status_code = -1;
+ return;
+ }
+
+ second_space = strchr(first_space + 1, ' ');
+ if (!second_space) {
+ wget_info->status_code = -1;
+ return;
+ }
+
+ wget_info->status_code = (u32)simple_strtoul(first_space + 1, &end, 10);
+
+ if (second_space != end)
+ wget_info->status_code = -1;
+
+ pos = strstr((char *)pkt, content_len);
+
+ if (pos) {
+ pos += sizeof(content_len) + 1;
+ while (*pos == ' ')
+ pos++;
+ content_length = simple_strtoul(pos, &end, 10);
+ debug_cond(DEBUG_WGET,
+ "wget: Connected Len %lu\n",
+ content_length);
+ wget_info->hdr_cont_len = content_length;
+ }
+}
+
static void wget_connected(uchar *pkt, unsigned int tcp_seq_num,
u8 action, unsigned int tcp_ack_num, unsigned int len)
{
@@ -239,7 +296,11 @@
initial_data_seq_num = tcp_seq_num + hlen;
next_data_seq_num = tcp_seq_num + len;
+ wget_fill_info(pkt, hlen);
+ debug_cond(DEBUG_WGET,
+ "wget: HTTP Status Code %d\n", wget_info->status_code);
+
- if (strstr((char *)pkt, http_ok) == 0) {
+ if (wget_info->status_code != 200) {
debug_cond(DEBUG_WGET,
"wget: Connected Bad Xfer\n");
wget_loop_state = NETLOOP_FAIL;
@@ -384,10 +445,13 @@
case WGET_TRANSFERRED:
printf("Packets received %d, Transfer Successful\n", packets);
net_set_state(wget_loop_state);
- efi_set_bootdev("Net", "", image_url,
- map_sysmem(image_load_addr, 0),
- net_boot_file_size);
- env_set_hex("filesize", net_boot_file_size);
+ wget_info->file_size = net_boot_file_size;
+ if (wget_info->method == WGET_HTTP_METHOD_GET && wget_info->set_bootdev) {
+ efi_set_bootdev("Http", NULL, image_url,
+ map_sysmem(image_load_addr, 0),
+ net_boot_file_size);
+ env_set_hex("filesize", net_boot_file_size);
+ }
break;
}
}
@@ -412,6 +476,9 @@
void wget_start(void)
{
+ if (!wget_info)
+ wget_info = &default_wget_info;
+
image_url = strchr(net_boot_file_name, ':');
if (image_url > 0) {
web_server_ip = string_to_ip(net_boot_file_name);
@@ -468,8 +535,7 @@
wget_send(TCP_SYN, 0, 0, 0);
}
-#if (IS_ENABLED(CONFIG_CMD_DNS))
-int wget_with_dns(ulong dst_addr, char *uri)
+int wget_do_request(ulong dst_addr, char *uri)
{
int ret;
char *s, *host_name, *file_name, *str_copy;
@@ -488,24 +554,32 @@
s = str_copy + strlen("http://");
host_name = strsep(&s, "/");
if (!s) {
- log_err("Error: invalied uri, no file path\n");
ret = -EINVAL;
goto out;
}
file_name = s;
- /* TODO: If the given uri has ip address for the http server, skip dns */
- net_dns_resolve = host_name;
- net_dns_env_var = "httpserverip";
- if (net_loop(DNS) < 0) {
- log_err("Error: dns lookup of %s failed, check setup\n", net_dns_resolve);
- ret = -EINVAL;
- goto out;
- }
- s = env_get("httpserverip");
- if (!s) {
+ host_name = strsep(&host_name, ":");
+
+ if (string_to_ip(host_name).s_addr) {
+ s = host_name;
+ } else {
+#if IS_ENABLED(CONFIG_CMD_DNS)
+ net_dns_resolve = host_name;
+ net_dns_env_var = "httpserverip";
+ if (net_loop(DNS) < 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+ s = env_get("httpserverip");
+ if (!s) {
+ ret = -EINVAL;
+ goto out;
+ }
+#else
ret = -EINVAL;
goto out;
+#endif
}
strlcpy(net_boot_file_name, s, sizeof(net_boot_file_name));
@@ -517,9 +591,8 @@
out:
free(str_copy);
- return ret;
+ return ret < 0 ? ret : 0;
}
-#endif
/**
* wget_validate_uri() - validate the uri for wget
diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c
index 9397328..e33b08a 100644
--- a/test/boot/bootflow.c
+++ b/test/boot/bootflow.c
@@ -1197,10 +1197,10 @@
return 0;
}
-BOOTSTD_TEST(bootflow_cros, UTF_CONSOLE);
+BOOTSTD_TEST(bootflow_cros, UTF_CONSOLE | UTF_DM | UTF_SCAN_FDT);
-/* Test Android bootmeth */
-static int bootflow_android(struct unit_test_state *uts)
+/* Test Android bootmeth with boot image version 4 */
+static int bootflow_android_image_v4(struct unit_test_state *uts)
{
if (!IS_ENABLED(CONFIG_BOOTMETH_ANDROID))
return -EAGAIN;
@@ -1220,7 +1220,30 @@
return 0;
}
-BOOTSTD_TEST(bootflow_android, UTF_CONSOLE);
+BOOTSTD_TEST(bootflow_android_image_v4, UTF_CONSOLE | UTF_DM | UTF_SCAN_FDT);
+
+/* Test Android bootmeth with boot image version 2 */
+static int bootflow_android_image_v2(struct unit_test_state *uts)
+{
+ if (!IS_ENABLED(CONFIG_BOOTMETH_ANDROID))
+ return -EAGAIN;
+
+ ut_assertok(scan_mmc_android_bootdev(uts, "mmc8"));
+ ut_assertok(run_command("bootflow list", 0));
+
+ ut_assert_nextlinen("Showing all");
+ ut_assert_nextlinen("Seq");
+ ut_assert_nextlinen("---");
+ ut_assert_nextlinen(" 0 extlinux");
+ ut_assert_nextlinen(" 1 android ready mmc 0 mmc8.bootdev.whole ");
+ ut_assert_nextlinen("---");
+ ut_assert_skip_to_line("(2 bootflows, 2 valid)");
+
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_android_image_v2, UTF_CONSOLE | UTF_DM | UTF_SCAN_FDT);
/* Test EFI bootmeth */
static int bootflow_efi(struct unit_test_state *uts)
diff --git a/test/boot/bootm.c b/test/boot/bootm.c
index 52b83f1..9455f44 100644
--- a/test/boot/bootm.c
+++ b/test/boot/bootm.c
@@ -28,6 +28,7 @@
/* This tests relies on GD_FLG_SILENT not being set */
gd->flags &= ~GD_FLG_SILENT;
+ env_set("silent_linux", NULL);
*buf = '\0';
ut_assertok(bootm_process_cmdline(buf, BUF_SIZE, BOOTM_CL_ALL));
@@ -183,6 +184,7 @@
ut_asserteq(0, bootm_process_cmdline(buf, 22, BOOTM_CL_SUBST));
/* Check multiple substitutions */
+ ut_assertok(env_set("bvar", NULL));
ut_assertok(env_set("var", "abc"));
strcpy(buf, "some${var}thing${bvar}else");
ut_asserteq(0, bootm_process_cmdline(buf, BUF_SIZE, BOOTM_CL_SUBST));
@@ -201,6 +203,7 @@
/* Test silent processing in the bootargs variable */
static int bootm_test_silent_var(struct unit_test_state *uts)
{
+ ut_assertok(env_set("var", NULL));
env_set("bootargs", NULL);
ut_assertok(bootm_process_cmdline_env(BOOTM_CL_SUBST));
ut_assertnull(env_get("bootargs"));
diff --git a/test/cmd/hash.c b/test/cmd/hash.c
index 2fcec9c..296dd76 100644
--- a/test/cmd/hash.c
+++ b/test/cmd/hash.c
@@ -33,11 +33,13 @@
strstr(uts->actual_str, "md5 for "));
ut_assert(strstr(uts->actual_str,
"d41d8cd98f00b204e9800998ecf8427e"));
- ut_check_console_line(uts, "d41d8cd98f00b204e9800998ecf8427e");
+ ut_assertok(ut_check_console_line(uts,
+ "d41d8cd98f00b204e9800998ecf8427e"));
if (!CONFIG_IS_ENABLED(HASH_VERIFY)) {
ut_assert(run_command("hash -v sha256 $loadaddr 0 foo", 0));
- ut_check_console_line(uts, "hash - compute hash message digest");
+ ut_assertok(ut_check_console_line(
+ uts, "hash - compute hash message digest"));
return 0;
}
@@ -77,12 +79,13 @@
strstr(uts->actual_str, "sha256 for "));
ut_assert(strstr(uts->actual_str,
"e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"));
- ut_check_console_line(uts,
- "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855");
+ ut_assertok(ut_check_console_line(
+ uts, "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"));
if (!CONFIG_IS_ENABLED(HASH_VERIFY)) {
ut_assert(run_command("hash -v sha256 $loadaddr 0 foo", 0));
- ut_check_console_line(uts, "hash - compute hash message digest");
+ ut_assertok(ut_check_console_line(
+ uts, "hash - compute hash message digest"));
return 0;
}
diff --git a/test/cmd/wget.c b/test/cmd/wget.c
index fe26fee..7570c06 100644
--- a/test/cmd/wget.c
+++ b/test/cmd/wget.c
@@ -19,7 +19,7 @@
#include <dm/test.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
-#include <test/lib.h>
+#include <test/cmd.h>
#include <test/test.h>
#include <test/ut.h>
@@ -206,6 +206,10 @@
static int net_test_wget(struct unit_test_state *uts)
{
+ char *prev_ethact = env_get("ethact");
+ char *prev_ethrotate = env_get("ethrotate");
+ char *prev_loadaddr = env_get("loadaddr");
+
sandbox_eth_set_tx_handler(0, sb_http_handler);
sandbox_eth_set_priv(0, uts);
@@ -223,6 +227,10 @@
ut_assert_nextline("md5 for 00020000 ... 0002001f ==> 234af48e94b0085060249ecb5942ab57");
ut_assert_console_end();
+ env_set("ethact", prev_ethact);
+ env_set("ethrotate", prev_ethrotate);
+ env_set("loadaddr", prev_loadaddr);
+
return 0;
}
-LIB_TEST(net_test_wget, UTF_CONSOLE);
+CMD_TEST(net_test_wget, UTF_CONSOLE);
diff --git a/test/common/print.c b/test/common/print.c
index 464e425..e3711b1 100644
--- a/test/common/print.c
+++ b/test/common/print.c
@@ -241,7 +241,7 @@
static int print_hexdump_line(struct unit_test_state *uts)
{
- char *linebuf;
+ u8 *linebuf;
u8 *buf;
int i;
@@ -254,10 +254,10 @@
linebuf = map_sysmem(0x400, BUF_SIZE);
memset(linebuf, '\xff', BUF_SIZE);
ut_asserteq(-ENOSPC, hexdump_line(0, buf, 1, 0x10, 0, linebuf, 75));
- ut_asserteq(-1, linebuf[0]);
+ ut_asserteq(0xff, linebuf[0]);
ut_asserteq(0x10, hexdump_line(0, buf, 1, 0x10, 0, linebuf, 76));
- ut_asserteq(0, linebuf[75]);
- ut_asserteq(-1, linebuf[76]);
+ ut_asserteq('\0', linebuf[75]);
+ ut_asserteq(0xff, linebuf[76]);
unmap_sysmem(buf);
diff --git a/test/dm/core.c b/test/dm/core.c
index 7371d3f..c59ffc6 100644
--- a/test/dm/core.c
+++ b/test/dm/core.c
@@ -999,6 +999,56 @@
}
DM_TEST(dm_test_remove_vital, 0);
+/* Test removal of 'active' devices */
+static int dm_test_remove_active(struct unit_test_state *uts)
+{
+ struct udevice *normal, *dma, *vital, *dma_vital;
+
+ /* Skip the behaviour in test_post_probe() */
+ uts->skip_post_probe = 1;
+
+ ut_assertok(device_bind_by_name(uts->root, false, &driver_info_manual,
+ &normal));
+ ut_assertnonnull(normal);
+
+ ut_assertok(device_bind_by_name(uts->root, false, &driver_info_act_dma,
+ &dma));
+ ut_assertnonnull(dma);
+
+ ut_assertok(device_bind_by_name(uts->root, false,
+ &driver_info_vital_clk, &vital));
+ ut_assertnonnull(vital);
+
+ ut_assertok(device_bind_by_name(uts->root, false,
+ &driver_info_act_dma_vital_clk,
+ &dma_vital));
+ ut_assertnonnull(dma_vital);
+
+ /* Probe the devices */
+ ut_assertok(device_probe(normal));
+ ut_assertok(device_probe(dma));
+ ut_assertok(device_probe(vital));
+ ut_assertok(device_probe(dma_vital));
+
+ /* Check that devices are active right now */
+ ut_asserteq(true, device_active(normal));
+ ut_asserteq(true, device_active(dma));
+ ut_asserteq(true, device_active(vital));
+ ut_asserteq(true, device_active(dma_vital));
+
+ /* Remove active devices in an ordered way */
+ dm_remove_devices_active();
+
+ /* Check that all devices are inactive right now */
+ ut_asserteq(true, device_active(normal));
+ ut_asserteq(false, device_active(dma));
+ ut_asserteq(true, device_active(vital));
+ ut_asserteq(false, device_active(dma_vital));
+
+ return 0;
+}
+DM_TEST(dm_test_remove_active, 0);
+
static int dm_test_uclass_before_ready(struct unit_test_state *uts)
{
struct uclass *uc;
diff --git a/test/dm/led.c b/test/dm/led.c
index 884f641..e5b8632 100644
--- a/test/dm/led.c
+++ b/test/dm/led.c
@@ -144,7 +144,7 @@
{
struct udevice *dev
- /* options/u-boot/boot-led is set to "sandbox:green" */
+ /* options/u-boot/boot-led is set to phandle to "sandbox:green" */
ut_assertok(led_get_by_label("sandbox:green", &dev));
ut_asserteq(LEDST_OFF, led_get_state(dev));
ut_assertok(led_boot_on());
@@ -154,14 +154,15 @@
return 0;
}
+DM_TEST(dm_test_led_boot, UTF_SCAN_PDATA | UTF_SCAN_FDT);
/* Test LED boot blink fallback */
#ifndef CONFIG_LED_BLINK
-static int dm_test_led_boot(struct unit_test_state *uts)
+static int dm_test_led_boot_blink(struct unit_test_state *uts)
{
struct udevice *dev
- /* options/u-boot/boot-led is set to "sandbox:green" */
+ /* options/u-boot/boot-led is set to phandle to "sandbox:green" */
ut_assertok(led_get_by_label("sandbox:green", &dev));
ut_asserteq(LEDST_OFF, led_get_state(dev));
ut_assertok(led_boot_blink());
@@ -171,16 +172,17 @@
return 0;
}
+DM_TEST(dm_test_led_boot_blink, UTF_SCAN_PDATA | UTF_SCAN_FDT);
#endif
#endif
/* Test LED activity */
#ifdef CONFIG_LED_ACTIVITY
-static int dm_test_led_boot(struct unit_test_state *uts)
+static int dm_test_led_activity(struct unit_test_state *uts)
{
struct udevice *dev
- /* options/u-boot/activity-led is set to "sandbox:red" */
+ /* options/u-boot/activity-led is set to phandle to "sandbox:red" */
ut_assertok(led_get_by_label("sandbox:red", &dev));
ut_asserteq(LEDST_OFF, led_get_state(dev));
ut_assertok(led_activity_on());
@@ -190,14 +192,15 @@
return 0;
}
+DM_TEST(dm_test_led_activity, UTF_SCAN_PDATA | UTF_SCAN_FDT);
/* Test LED activity blink fallback */
#ifndef CONFIG_LED_BLINK
-static int dm_test_led_boot(struct unit_test_state *uts)
+static int dm_test_led_activityt_blink(struct unit_test_state *uts)
{
struct udevice *dev
- /* options/u-boot/activity-led is set to "sandbox:red" */
+ /* options/u-boot/activity-led is set to phandle to "sandbox:red" */
ut_assertok(led_get_by_label("sandbox:red", &dev));
ut_asserteq(LEDST_OFF, led_get_state(dev));
ut_assertok(led_activity_blink());
@@ -207,5 +210,6 @@
return 0;
}
+DM_TEST(dm_test_led_activityt_blink, UTF_SCAN_PDATA | UTF_SCAN_FDT);
#endif
#endif
diff --git a/test/dm/ofnode.c b/test/dm/ofnode.c
index ce99656..f16b643 100644
--- a/test/dm/ofnode.c
+++ b/test/dm/ofnode.c
@@ -141,9 +141,16 @@
{
oftree otree = get_other_oftree(uts);
ofnode node;
+ u32 idx;
+ int ret;
+
+ node = oftree_path(otree, "/node");
+ ut_assert(ofnode_valid(node));
- ut_assert(ofnode_valid(oftree_get_by_phandle(oftree_default(), 1)));
- node = oftree_get_by_phandle(otree, 1);
+ ret = ofnode_read_u32(node, "other-phandle", &idx);
+ ut_assertok(ret);
+
+ node = oftree_get_by_phandle(otree, idx);
ut_assert(ofnode_valid(node));
ut_asserteq_str("target", ofnode_get_name(node));
@@ -273,15 +280,16 @@
}
DM_TEST(dm_test_ofnode_read_ot, UTF_SCAN_FDT | UTF_OTHER_FDT);
-/* test ofnode_count_/parse_phandle_with_args() */
+/* test ofnode_count_/parse/_phandle_with_args() */
static int dm_test_ofnode_phandle(struct unit_test_state *uts)
{
struct ofnode_phandle_args args;
- ofnode node;
+ ofnode node, phandle, target;
int ret;
const char prop[] = "test-gpios";
const char cell[] = "#gpio-cells";
const char prop2[] = "phandle-value";
+ const char prop3[] = "phandle-nodes";
node = ofnode_path("/a-test");
ut_assert(ofnode_valid(node));
@@ -345,34 +353,117 @@
ret = ofnode_parse_phandle_with_args(node, prop2, NULL, 1, 3, &args);
ut_asserteq(-ENOENT, ret);
+ /* Test ofnode_parse_phandle */
+ phandle = ofnode_parse_phandle(node, "missing", 0);
+ ut_assert(ofnode_equal(ofnode_null(), phandle));
+
+ target = ofnode_path("/phandle-node-1");
+ ut_assert(ofnode_valid(target));
+ phandle = ofnode_parse_phandle(node, prop3, 0);
+ ut_assert(ofnode_equal(target, phandle));
+
+ target = ofnode_path("/phandle-node-2");
+ ut_assert(ofnode_valid(target));
+ phandle = ofnode_parse_phandle(node, prop3, 1);
+ ut_assert(ofnode_equal(target, phandle));
+
+ phandle = ofnode_parse_phandle(node, prop3, 3);
+ ut_assert(ofnode_equal(ofnode_null(), phandle));
+
return 0;
}
DM_TEST(dm_test_ofnode_phandle, UTF_SCAN_PDATA | UTF_SCAN_FDT);
-/* test ofnode_count_/parse_phandle_with_args() with 'other' tree */
+/* test oftree_count_/parse/_phandle_with_args() with 'other' tree */
static int dm_test_ofnode_phandle_ot(struct unit_test_state *uts)
{
oftree otree = get_other_oftree(uts);
struct ofnode_phandle_args args;
- ofnode node;
+ ofnode node, phandle, target;
int ret;
+ const char prop[] = "other-test-gpios";
+ const char cell[] = "#gpio-cells";
+ const char prop2[] = "other-phandle-value";
+ const char prop3[] = "other-phandle-nodes";
- node = oftree_path(otree, "/node");
+ node = oftree_path(otree, "/other-a-test");
+ ut_assert(ofnode_valid(node));
- /* Test ofnode_count_phandle_with_args with cell name */
- ret = ofnode_count_phandle_with_args(node, "missing", "#gpio-cells", 0);
+ /* Test oftree_count_phandle_with_args with cell name */
+ ret = oftree_count_phandle_with_args(otree, node, "missing", cell, 0);
ut_asserteq(-ENOENT, ret);
- ret = ofnode_count_phandle_with_args(node, "target", "#invalid", 0);
+ ret = oftree_count_phandle_with_args(otree, node, prop, "#invalid", 0);
ut_asserteq(-EINVAL, ret);
- ret = ofnode_count_phandle_with_args(node, "target", "#gpio-cells", 0);
- ut_asserteq(1, ret);
+ ret = oftree_count_phandle_with_args(otree, node, prop, cell, 0);
+ ut_asserteq(5, ret);
- ret = ofnode_parse_phandle_with_args(node, "target", "#gpio-cells", 0,
- 0, &args);
+ /* Test oftree_parse_phandle_with_args with cell name */
+ ret = oftree_parse_phandle_with_args(otree, node, "missing", cell, 0, 0,
+ &args);
+ ut_asserteq(-ENOENT, ret);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, "#invalid", 0, 0,
+ &args);
+ ut_asserteq(-EINVAL, ret);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 0, &args);
+ ut_assertok(ret);
+ ut_asserteq(1, args.args_count);
+ ut_asserteq(1, args.args[0]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 1, &args);
ut_assertok(ret);
- ut_asserteq(2, args.args_count);
- ut_asserteq(3, args.args[0]);
- ut_asserteq(4, args.args[1]);
+ ut_asserteq(1, args.args_count);
+ ut_asserteq(4, args.args[0]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 2, &args);
+ ut_assertok(ret);
+ ut_asserteq(5, args.args_count);
+ ut_asserteq(5, args.args[0]);
+ ut_asserteq(1, args.args[4]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 3, &args);
+ ut_asserteq(-ENOENT, ret);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 4, &args);
+ ut_assertok(ret);
+ ut_asserteq(1, args.args_count);
+ ut_asserteq(12, args.args[0]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop, cell, 0, 5, &args);
+ ut_asserteq(-ENOENT, ret);
+
+ /* Test oftree_count_phandle_with_args with cell count */
+ ret = oftree_count_phandle_with_args(otree, node, "missing", NULL, 2);
+ ut_asserteq(-ENOENT, ret);
+ ret = oftree_count_phandle_with_args(otree, node, prop2, NULL, 1);
+ ut_asserteq(3, ret);
+
+ /* Test oftree_parse_phandle_with_args with cell count */
+ ret = oftree_parse_phandle_with_args(otree, node, prop2, NULL, 1, 0, &args);
+ ut_assertok(ret);
+ ut_asserteq(1, ofnode_valid(args.node));
+ ut_asserteq(1, args.args_count);
+ ut_asserteq(10, args.args[0]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop2, NULL, 1, 1, &args);
+ ut_asserteq(-EINVAL, ret);
+ ret = oftree_parse_phandle_with_args(otree, node, prop2, NULL, 1, 2, &args);
+ ut_assertok(ret);
+ ut_asserteq(1, ofnode_valid(args.node));
+ ut_asserteq(1, args.args_count);
+ ut_asserteq(30, args.args[0]);
+ ret = oftree_parse_phandle_with_args(otree, node, prop2, NULL, 1, 3, &args);
+ ut_asserteq(-ENOENT, ret);
+
+ /* Test oftree_parse_phandle */
+ phandle = oftree_parse_phandle(otree, node, "missing", 0);
+ ut_assert(ofnode_equal(ofnode_null(), phandle));
+
+ target = oftree_path(otree, "/other-phandle-node-1");
+ ut_assert(ofnode_valid(target));
+ phandle = oftree_parse_phandle(otree, node, prop3, 0);
+ ut_assert(ofnode_equal(target, phandle));
+
+ target = oftree_path(otree, "/other-phandle-node-2");
+ ut_assert(ofnode_valid(target));
+ phandle = oftree_parse_phandle(otree, node, prop3, 1);
+ ut_assert(ofnode_equal(target, phandle));
+
+ phandle = oftree_parse_phandle(otree, node, prop3, 3);
+ ut_assert(ofnode_equal(ofnode_null(), phandle));
return 0;
}
@@ -613,6 +704,10 @@
{
u64 bootscr_address, bootscr_offset;
u64 bootscr_flash_offset, bootscr_flash_size;
+ ofnode node, phandle_node, target;
+
+ node = ofnode_path("/options/u-boot");
+ ut_assert(ofnode_valid(node));
ut_assert(!ofnode_options_read_bool("missing"));
ut_assert(ofnode_options_read_bool("testing-bool"));
@@ -623,6 +718,13 @@
ut_assertnull(ofnode_options_read_str("missing"));
ut_asserteq_str("testing", ofnode_options_read_str("testing-str"));
+ ut_asserteq(-EINVAL, ofnode_options_get_by_phandle("missing", &phandle_node));
+
+ target = ofnode_path("/phandle-node-1");
+ ut_assert(ofnode_valid(target));
+ ut_assertok(ofnode_options_get_by_phandle("testing-phandle", &phandle_node));
+ ut_assert(ofnode_equal(target, phandle_node));
+
ut_assertok(ofnode_read_bootscript_address(&bootscr_address,
&bootscr_offset));
ut_asserteq_64(0, bootscr_address);
diff --git a/test/dm/sysinfo-gpio.c b/test/dm/sysinfo-gpio.c
index 155da3b..de9483c 100644
--- a/test/dm/sysinfo-gpio.c
+++ b/test/dm/sysinfo-gpio.c
@@ -29,9 +29,9 @@
sandbox_gpio_set_flags(gpio, 16, GPIOD_EXT_PULL_DOWN);
sandbox_gpio_set_flags(gpio, 17, 0);
ut_assertok(sysinfo_detect(sysinfo));
- ut_assertok(sysinfo_get_int(sysinfo, SYSINFO_ID_BOARD_MODEL, &val));
+ ut_assertok(sysinfo_get_int(sysinfo, SYSID_BOARD_MODEL, &val));
ut_asserteq(19, val);
- ut_assertok(sysinfo_get_str(sysinfo, SYSINFO_ID_BOARD_MODEL, sizeof(buf),
+ ut_assertok(sysinfo_get_str(sysinfo, SYSID_BOARD_MODEL, sizeof(buf),
buf));
ut_asserteq_str("rev_a", buf);
@@ -43,9 +43,9 @@
sandbox_gpio_set_flags(gpio, 16, GPIOD_EXT_PULL_UP);
sandbox_gpio_set_flags(gpio, 17, GPIOD_EXT_PULL_DOWN);
ut_assertok(sysinfo_detect(sysinfo));
- ut_assertok(sysinfo_get_int(sysinfo, SYSINFO_ID_BOARD_MODEL, &val));
+ ut_assertok(sysinfo_get_int(sysinfo, SYSID_BOARD_MODEL, &val));
ut_asserteq(5, val);
- ut_assertok(sysinfo_get_str(sysinfo, SYSINFO_ID_BOARD_MODEL, sizeof(buf),
+ ut_assertok(sysinfo_get_str(sysinfo, SYSID_BOARD_MODEL, sizeof(buf),
buf));
ut_asserteq_str("foo", buf);
@@ -57,9 +57,9 @@
sandbox_gpio_set_flags(gpio, 16, 0);
sandbox_gpio_set_flags(gpio, 17, GPIOD_EXT_PULL_UP);
ut_assertok(sysinfo_detect(sysinfo));
- ut_assertok(sysinfo_get_int(sysinfo, SYSINFO_ID_BOARD_MODEL, &val));
+ ut_assertok(sysinfo_get_int(sysinfo, SYSID_BOARD_MODEL, &val));
ut_asserteq(15, val);
- ut_assertok(sysinfo_get_str(sysinfo, SYSINFO_ID_BOARD_MODEL, sizeof(buf),
+ ut_assertok(sysinfo_get_str(sysinfo, SYSID_BOARD_MODEL, sizeof(buf),
buf));
ut_asserteq_str("unknown", buf);
diff --git a/test/env/cmd_ut_env.c b/test/env/cmd_ut_env.c
index 4af0576..9f16a97 100644
--- a/test/env/cmd_ut_env.c
+++ b/test/env/cmd_ut_env.c
@@ -14,23 +14,62 @@
ut_assertok(run_command("setenv non_default_var1 1", 0));
ut_assert_console_end();
- ut_assertok(run_command("setenv non_default_var2 1", 0));
+ ut_assertok(run_command("setenv non_default_var2 2", 0));
ut_assert_console_end();
ut_assertok(run_command("env print non_default_var1", 0));
ut_assert_nextline("non_default_var1=1");
ut_assert_console_end();
- ut_assertok(run_command("env default non_default_var1 non_default_var2", 0));
+ ut_assertok(run_command("env default non_default_var1", 0));
ut_assert_nextline("WARNING: 'non_default_var1' not in imported env, deleting it!");
- ut_assert_nextline("WARNING: 'non_default_var2' not in imported env, deleting it!");
ut_assert_console_end();
ut_asserteq(1, run_command("env exists non_default_var1", 0));
ut_assert_console_end();
+ ut_asserteq(0, run_command("env exists non_default_var2", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("setenv non_default_var1 3", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("env default -k non_default_var1", 0));
+ ut_assert_console_end();
+
+ ut_asserteq(0, run_command("env exists non_default_var1", 0));
+ ut_assert_console_end();
+
+ ut_asserteq(0, run_command("env exists non_default_var2", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("env default -k -a -f", 0));
+ ut_assert_nextline("## Resetting to default environment");
+ ut_assert_console_end();
+
+ ut_asserteq(0, run_command("env exists non_default_var1", 0));
+ ut_assert_console_end();
+
+ ut_asserteq(0, run_command("env exists non_default_var2", 0));
+ ut_assert_console_end();
+
+ /*
+ * While the following test of "env default -a" by itself
+ * works, it unfortunately causes an unrelated test case,
+ * env_test_fdt_import(), to fail, because the "from_fdt"
+ * variable would be removed.
+ */
+#if 0
+ ut_assertok(run_command("env default -a", 0));
+ ut_assert_nextline("## Resetting to default environment");
+ ut_assert_console_end();
+
+ ut_asserteq(1, run_command("env exists non_default_var1", 0));
+ ut_assert_console_end();
+
ut_asserteq(1, run_command("env exists non_default_var2", 0));
ut_assert_console_end();
+#endif
return 0;
}
diff --git a/test/lib/lmb.c b/test/lib/lmb.c
index c917115..0bd29e2 100644
--- a/test/lib/lmb.c
+++ b/test/lib/lmb.c
@@ -529,6 +529,26 @@
ret = lmb_add(ram, ram_size);
ut_asserteq(ret, 0);
+ /* Try to allocate a page twice */
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NONE);
+ ut_asserteq(b, alloc_addr_a);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NOOVERWRITE);
+ ut_asserteq(b, 0);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NONE);
+ ut_asserteq(b, alloc_addr_a);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x2000, LMB_NONE);
+ ut_asserteq(b, alloc_addr_a);
+ ret = lmb_free(alloc_addr_a, 0x2000);
+ ut_asserteq(ret, 0);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NOOVERWRITE);
+ ut_asserteq(b, alloc_addr_a);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NONE);
+ ut_asserteq(b, 0);
+ b = lmb_alloc_addr_flags(alloc_addr_a, 0x1000, LMB_NOOVERWRITE);
+ ut_asserteq(b, 0);
+ ret = lmb_free(alloc_addr_a, 0x1000);
+ ut_asserteq(ret, 0);
+
/* reserve 3 blocks */
ret = lmb_reserve(alloc_addr_a, 0x10000);
ut_asserteq(ret, 0);
@@ -734,7 +754,7 @@
/* reserve again, same flag */
ret = lmb_reserve_flags(0x40010000, 0x10000, LMB_NOMAP);
- ut_asserteq(ret, 0);
+ ut_asserteq(ret, -1L);
ASSERT_LMB(mem_lst, used_lst, ram, ram_size, 1, 0x40010000, 0x10000,
0, 0, 0, 0);
diff --git a/test/lib/str.c b/test/lib/str.c
index 3cc9dfe..e620453 100644
--- a/test/lib/str.c
+++ b/test/lib/str.c
@@ -18,6 +18,8 @@
static const char str5[] = "0x9876543210the last time I was deloused";
static const char str6[] = "0778octal is seldom used";
static const char str7[] = "707it is a piece of computing history";
+static const char str8[] = "0x887e2561352d80fa";
+static const char str9[] = "614FF7EAA63009DA";
static int str_upper(struct unit_test_state *uts)
{
@@ -186,6 +188,22 @@
}
LIB_TEST(str_hextoul, 0);
+static int str_hextoull(struct unit_test_state *uts)
+{
+ char *endp;
+
+ /* Just a simple test, since we know this uses simple_strtoull() */
+ ut_asserteq_64(0x887e2561352d80faULL, hextoull(str8, &endp));
+ ut_asserteq_64(0x12, endp - str8);
+ ut_asserteq_64(0x614ff7eaa63009daULL, hextoull(str9, &endp));
+ ut_asserteq_64(0x10, endp - str9);
+ ut_asserteq_64(0x887e2561352d80faULL, hextoull(str8, NULL));
+ ut_asserteq_64(0x614ff7eaa63009daULL, hextoull(str9, NULL));
+
+ return 0;
+}
+LIB_TEST(str_hextoull, 0);
+
static int str_dectoul(struct unit_test_state *uts)
{
char *endp;
diff --git a/test/lib/time.c b/test/lib/time.c
index b99e738..2095bef 100644
--- a/test/lib/time.c
+++ b/test/lib/time.c
@@ -22,7 +22,11 @@
next = get_timer(0);
} while (start == next);
- ut_asserteq(start + 1, next);
+ if (start + 1 != next) {
+ printf("%s: iter=%d, start=%lu, next=%lu, expected a difference of 1\n",
+ __func__, iter, start, next);
+ return -EINVAL;
+ }
start++;
}
@@ -31,7 +35,11 @@
* an extra millisecond may have passed.
*/
diff = get_timer(base);
- ut_assert(diff == iter || diff == iter + 1);
+ if (diff != iter && diff != iter + 1) {
+ printf("%s: expected get_timer(base) to match elapsed time: diff=%lu, expected=%d\n",
+ __func__, diff, iter);
+ return -EINVAL;
+ }
return 0;
}
@@ -49,8 +57,11 @@
next = timer_get_us();
if (next != prev) {
delta = next - prev;
- ut_assert(delta >= 0);
- if (delta) {
+ if (delta < 0) {
+ printf("%s: timer_get_us() went backwards from %lu to %lu\n",
+ __func__, prev, next);
+ return -EINVAL;
+ } else if (delta != 0) {
if (delta < min)
min = delta;
prev = next;
@@ -59,7 +70,11 @@
}
}
- ut_asserteq(1, min);
+ if (min != 1) {
+ printf("%s: Minimum microsecond delta should be 1 but is %lu\n",
+ __func__, min);
+ return -EINVAL;
+ }
return 0;
}
@@ -80,7 +95,8 @@
error = delta_us - 1000000;
printf("%s: Microsecond time for 1 second: %lu, error = %ld\n",
__func__, delta_us, error);
- ut_assert(abs(error) <= 1000);
+ if (abs(error) > 1000)
+ return -EINVAL;
return 0;
}
@@ -99,7 +115,8 @@
error = delta - 1000;
printf("%s: Delay time for 1000 udelay(1000): %lu ms, error = %ld\n",
__func__, delta, error);
- ut_assert(abs(error) <= 100);
+ if (abs(error) > 100)
+ return -EINVAL;
return 0;
}
diff --git a/test/py/tests/bootstd/flash1.img.xz b/test/py/tests/bootstd/flash1.img.xz
deleted file mode 100644
index 29b78c6..0000000
--- a/test/py/tests/bootstd/flash1.img.xz
+++ /dev/null
Binary files differ
diff --git a/test/py/tests/bootstd/mmc1.img.xz b/test/py/tests/bootstd/mmc1.img.xz
deleted file mode 100644
index cebf7b9..0000000
--- a/test/py/tests/bootstd/mmc1.img.xz
+++ /dev/null
Binary files differ
diff --git a/test/py/tests/bootstd/mmc4.img.xz b/test/py/tests/bootstd/mmc4.img.xz
deleted file mode 100644
index f4db011..0000000
--- a/test/py/tests/bootstd/mmc4.img.xz
+++ /dev/null
Binary files differ
diff --git a/test/py/tests/fs_helper.py b/test/py/tests/fs_helper.py
index 380f4c4..ccfc020 100644
--- a/test/py/tests/fs_helper.py
+++ b/test/py/tests/fs_helper.py
@@ -9,7 +9,7 @@
import os
from subprocess import call, check_call, check_output, CalledProcessError
-def mk_fs(config, fs_type, size, prefix, size_gran = 0x100000):
+def mk_fs(config, fs_type, size, prefix, src_dir=None, size_gran = 0x100000):
"""Create a file system volume
Args:
@@ -17,6 +17,7 @@
fs_type (str): File system type, e.g. 'ext4'
size (int): Size of file system in bytes
prefix (str): Prefix string of volume's file name
+ src_dir (str): Root directory to use, or None for none
size_gran (int): Size granularity of file system image in bytes
Raises:
@@ -39,6 +40,12 @@
else:
fs_lnxtype = fs_type
+ if src_dir:
+ if fs_lnxtype == 'ext4':
+ mkfs_opt = mkfs_opt + ' -d ' + src_dir
+ elif fs_lnxtype != 'vfat':
+ raise ValueError(f'src_dir not implemented for fs {fs_lnxtype}')
+
count = (size + size_gran - 1) // size_gran
# Some distributions do not add /sbin to the default PATH, where mkfs lives
@@ -55,6 +62,8 @@
shell=True).decode()
if 'metadata_csum' in sb_content:
check_call(f'tune2fs -O ^metadata_csum {fs_img}', shell=True)
+ elif fs_lnxtype == 'vfat' and src_dir:
+ check_call(f'mcopy -i {fs_img} -vsmpQ {src_dir}/* ::/', shell=True)
return fs_img
except CalledProcessError:
call(f'rm -f {fs_img}', shell=True)
diff --git a/test/py/tests/test_fs/conftest.py b/test/py/tests/test_fs/conftest.py
index fca5448..af2adaf 100644
--- a/test/py/tests/test_fs/conftest.py
+++ b/test/py/tests/test_fs/conftest.py
@@ -156,64 +156,6 @@
return True
return False
-fuse_mounted = False
-
-def mount_fs(fs_type, device, mount_point):
- """Mount a volume.
-
- Args:
- fs_type: File system type.
- device: Volume's file name.
- mount_point: Mount point.
-
- Return:
- Nothing.
- """
- global fuse_mounted
-
- try:
- check_call('guestmount --pid-file guestmount.pid -a %s -m /dev/sda %s'
- % (device, mount_point), shell=True)
- fuse_mounted = True
- return
- except CalledProcessError:
- fuse_mounted = False
-
- mount_opt = 'loop,rw'
- if re.match('fat', fs_type):
- mount_opt += ',umask=0000'
-
- check_call('sudo mount -o %s %s %s'
- % (mount_opt, device, mount_point), shell=True)
-
- # may not be effective for some file systems
- check_call('sudo chmod a+rw %s' % mount_point, shell=True)
-
-def umount_fs(mount_point):
- """Unmount a volume.
-
- Args:
- mount_point: Mount point.
-
- Return:
- Nothing.
- """
- if fuse_mounted:
- call('sync')
- call('guestunmount %s' % mount_point, shell=True)
-
- try:
- with open("guestmount.pid", "r") as pidfile:
- pid = int(pidfile.read())
- util.waitpid(pid, kill=True)
- os.remove("guestmount.pid")
-
- except FileNotFoundError:
- pass
-
- else:
- call('sudo umount %s' % mount_point, shell=True)
-
#
# Fixture for basic fs test
# derived from test/fs/fs-test.sh
@@ -236,38 +178,21 @@
fs_ubtype = fstype_to_ubname(fs_type)
check_ubconfig(u_boot_config, fs_ubtype)
- mount_dir = u_boot_config.persistent_data_dir + '/mnt'
+ scratch_dir = u_boot_config.persistent_data_dir + '/scratch'
- small_file = mount_dir + '/' + SMALL_FILE
- big_file = mount_dir + '/' + BIG_FILE
+ small_file = scratch_dir + '/' + SMALL_FILE
+ big_file = scratch_dir + '/' + BIG_FILE
try:
-
- # 3GiB volume
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0xc0000000, '3GB')
- except CalledProcessError as err:
- pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
- return
-
- try:
- check_call('mkdir -p %s' % mount_dir, shell=True)
+ check_call('mkdir -p %s' % scratch_dir, shell=True)
except CalledProcessError as err:
pytest.skip('Preparing mount folder failed for filesystem: ' + fs_type + '. {}'.format(err))
call('rm -f %s' % fs_img, shell=True)
return
try:
- # Mount the image so we can populate it.
- mount_fs(fs_type, fs_img, mount_dir)
- except CalledProcessError as err:
- pytest.skip('Mounting to folder failed for filesystem: ' + fs_type + '. {}'.format(err))
- call('rmdir %s' % mount_dir, shell=True)
- call('rm -f %s' % fs_img, shell=True)
- return
-
- try:
# Create a subdirectory.
- check_call('mkdir %s/SUBDIR' % mount_dir, shell=True)
+ check_call('mkdir %s/SUBDIR' % scratch_dir, shell=True)
# Create big file in this image.
# Note that we work only on the start 1MB, couple MBs in the 2GB range
@@ -326,15 +251,20 @@
% big_file, shell=True).decode()
md5val.append(out.split()[0])
+ try:
+ # 3GiB volume
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0xc0000000, '3GB', scratch_dir)
+ except CalledProcessError as err:
+ pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
+ return
+
except CalledProcessError as err:
pytest.skip('Setup failed for filesystem: ' + fs_type + '. {}'.format(err))
- umount_fs(mount_dir)
return
else:
- umount_fs(mount_dir)
yield [fs_ubtype, fs_img, md5val]
finally:
- call('rmdir %s' % mount_dir, shell=True)
+ call('rm -rf %s' % scratch_dir, shell=True)
call('rm -f %s' % fs_img, shell=True)
#
@@ -358,38 +288,21 @@
fs_ubtype = fstype_to_ubname(fs_type)
check_ubconfig(u_boot_config, fs_ubtype)
- mount_dir = u_boot_config.persistent_data_dir + '/mnt'
-
- min_file = mount_dir + '/' + MIN_FILE
- tmp_file = mount_dir + '/tmpfile'
+ scratch_dir = u_boot_config.persistent_data_dir + '/scratch'
- try:
-
- # 128MiB volume
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB')
- except CalledProcessError as err:
- pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
- return
+ min_file = scratch_dir + '/' + MIN_FILE
+ tmp_file = scratch_dir + '/tmpfile'
try:
- check_call('mkdir -p %s' % mount_dir, shell=True)
+ check_call('mkdir -p %s' % scratch_dir, shell=True)
except CalledProcessError as err:
pytest.skip('Preparing mount folder failed for filesystem: ' + fs_type + '. {}'.format(err))
call('rm -f %s' % fs_img, shell=True)
return
try:
- # Mount the image so we can populate it.
- mount_fs(fs_type, fs_img, mount_dir)
- except CalledProcessError as err:
- pytest.skip('Mounting to folder failed for filesystem: ' + fs_type + '. {}'.format(err))
- call('rmdir %s' % mount_dir, shell=True)
- call('rm -f %s' % fs_img, shell=True)
- return
-
- try:
# Create a test directory
- check_call('mkdir %s/dir1' % mount_dir, shell=True)
+ check_call('mkdir %s/dir1' % scratch_dir, shell=True)
# Create a small file and calculate md5
check_call('dd if=/dev/urandom of=%s bs=1K count=20'
@@ -427,15 +340,21 @@
md5val.append(out.split()[0])
check_call('rm %s' % tmp_file, shell=True)
+
+ try:
+ # 128MiB volume
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB', scratch_dir)
+ except CalledProcessError as err:
+ pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
+ return
+
except CalledProcessError:
pytest.skip('Setup failed for filesystem: ' + fs_type)
- umount_fs(mount_dir)
return
else:
- umount_fs(mount_dir)
yield [fs_ubtype, fs_img, md5val]
finally:
- call('rmdir %s' % mount_dir, shell=True)
+ call('rm -rf %s' % scratch_dir, shell=True)
call('rm -f %s' % fs_img, shell=True)
#
@@ -461,7 +380,7 @@
try:
# 128MiB volume
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB')
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB', None)
except:
pytest.skip('Setup failed for filesystem: ' + fs_type)
return
@@ -490,63 +409,51 @@
fs_ubtype = fstype_to_ubname(fs_type)
check_ubconfig(u_boot_config, fs_ubtype)
- mount_dir = u_boot_config.persistent_data_dir + '/mnt'
-
- try:
-
- # 128MiB volume
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB')
- except CalledProcessError as err:
- pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
- return
+ scratch_dir = u_boot_config.persistent_data_dir + '/scratch'
try:
- check_call('mkdir -p %s' % mount_dir, shell=True)
+ check_call('mkdir -p %s' % scratch_dir, shell=True)
except CalledProcessError as err:
pytest.skip('Preparing mount folder failed for filesystem: ' + fs_type + '. {}'.format(err))
call('rm -f %s' % fs_img, shell=True)
return
try:
- # Mount the image so we can populate it.
- mount_fs(fs_type, fs_img, mount_dir)
- except CalledProcessError as err:
- pytest.skip('Mounting to folder failed for filesystem: ' + fs_type + '. {}'.format(err))
- call('rmdir %s' % mount_dir, shell=True)
- call('rm -f %s' % fs_img, shell=True)
- return
-
- try:
# Test Case 1 & 3
- check_call('mkdir %s/dir1' % mount_dir, shell=True)
+ check_call('mkdir %s/dir1' % scratch_dir, shell=True)
check_call('dd if=/dev/urandom of=%s/dir1/file1 bs=1K count=1'
- % mount_dir, shell=True)
+ % scratch_dir, shell=True)
check_call('dd if=/dev/urandom of=%s/dir1/file2 bs=1K count=1'
- % mount_dir, shell=True)
+ % scratch_dir, shell=True)
# Test Case 2
- check_call('mkdir %s/dir2' % mount_dir, shell=True)
+ check_call('mkdir %s/dir2' % scratch_dir, shell=True)
for i in range(0, 20):
check_call('mkdir %s/dir2/0123456789abcdef%02x'
- % (mount_dir, i), shell=True)
+ % (scratch_dir, i), shell=True)
# Test Case 4
- check_call('mkdir %s/dir4' % mount_dir, shell=True)
+ check_call('mkdir %s/dir4' % scratch_dir, shell=True)
# Test Case 5, 6 & 7
- check_call('mkdir %s/dir5' % mount_dir, shell=True)
+ check_call('mkdir %s/dir5' % scratch_dir, shell=True)
check_call('dd if=/dev/urandom of=%s/dir5/file1 bs=1K count=1'
- % mount_dir, shell=True)
+ % scratch_dir, shell=True)
+
+ try:
+ # 128MiB volume
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x8000000, '128MB', scratch_dir)
+ except CalledProcessError as err:
+ pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
+ return
except CalledProcessError:
pytest.skip('Setup failed for filesystem: ' + fs_type)
- umount_fs(mount_dir)
return
else:
- umount_fs(mount_dir)
yield [fs_ubtype, fs_img]
finally:
- call('rmdir %s' % mount_dir, shell=True)
+ call('rm -rf %s' % scratch_dir, shell=True)
call('rm -f %s' % fs_img, shell=True)
#
@@ -570,38 +477,21 @@
fs_ubtype = fstype_to_ubname(fs_type)
check_ubconfig(u_boot_config, fs_ubtype)
- mount_dir = u_boot_config.persistent_data_dir + '/mnt'
+ scratch_dir = u_boot_config.persistent_data_dir + '/scratch'
- small_file = mount_dir + '/' + SMALL_FILE
- medium_file = mount_dir + '/' + MEDIUM_FILE
+ small_file = scratch_dir + '/' + SMALL_FILE
+ medium_file = scratch_dir + '/' + MEDIUM_FILE
try:
-
- # 1GiB volume
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x40000000, '1GB')
- except CalledProcessError as err:
- pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
- return
-
- try:
- check_call('mkdir -p %s' % mount_dir, shell=True)
+ check_call('mkdir -p %s' % scratch_dir, shell=True)
except CalledProcessError as err:
pytest.skip('Preparing mount folder failed for filesystem: ' + fs_type + '. {}'.format(err))
call('rm -f %s' % fs_img, shell=True)
return
try:
- # Mount the image so we can populate it.
- mount_fs(fs_type, fs_img, mount_dir)
- except CalledProcessError as err:
- pytest.skip('Mounting to folder failed for filesystem: ' + fs_type + '. {}'.format(err))
- call('rmdir %s' % mount_dir, shell=True)
- call('rm -f %s' % fs_img, shell=True)
- return
-
- try:
# Create a subdirectory.
- check_call('mkdir %s/SUBDIR' % mount_dir, shell=True)
+ check_call('mkdir %s/SUBDIR' % scratch_dir, shell=True)
# Create a small file in this image.
check_call('dd if=/dev/urandom of=%s bs=1M count=1'
@@ -621,15 +511,20 @@
% medium_file, shell=True).decode()
md5val.extend([out.split()[0]])
+ try:
+ # 1GiB volume
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, 0x40000000, '1GB', scratch_dir)
+ except CalledProcessError as err:
+ pytest.skip('Creating failed for filesystem: ' + fs_type + '. {}'.format(err))
+ return
+
except CalledProcessError:
pytest.skip('Setup failed for filesystem: ' + fs_type)
- umount_fs(mount_dir)
return
else:
- umount_fs(mount_dir)
yield [fs_ubtype, fs_img, md5val]
finally:
- call('rmdir %s' % mount_dir, shell=True)
+ call('rm -rf %s' % scratch_dir, shell=True)
call('rm -f %s' % fs_img, shell=True)
#
@@ -665,7 +560,7 @@
try:
# the volume size depends on the filesystem
- fs_img = fs_helper.mk_fs(u_boot_config, fs_type, fs_size, f'{fs_size}', 1024)
+ fs_img = fs_helper.mk_fs(u_boot_config, fs_type, fs_size, f'{fs_size}', None, 1024)
except:
pytest.skip('Setup failed for filesystem: ' + fs_type)
return
diff --git a/test/py/tests/test_mmc.py b/test/py/tests/test_mmc.py
index a96c4e8..4624043 100644
--- a/test/py/tests/test_mmc.py
+++ b/test/py/tests/test_mmc.py
@@ -18,16 +18,55 @@
# Setup env__mmc_device_test_skip to not skipping the test. By default, its
# value is set to True. Set it to False to run all tests for MMC device.
env__mmc_device_test_skip = False
+
+# Setup env__mmc_device to set the supported mmc modes to be tested
+env__mmc_device {
+ 'mmc_modes': ['MMC_LEGACY', 'SD_HS'],
+}
+
"""
mmc_set_up = False
controllers = 0
devices = {}
+mmc_modes_name = []
+mmc_modes = []
+
+def setup_mmc_modes(cons):
+ global mmc_modes, mmc_modes_name
+ f = cons.config.env.get('env__mmc_device', None)
+ if f:
+ mmc_modes_name = f.get('mmc_modes', None)
+
+ # Set mmc mode to default mode (legacy), if speed mode config isn't enabled
+ if cons.config.buildconfig.get('config_mmc_speed_mode_set', 'n') != 'y':
+ mmc_modes = [0]
+ return
+
+ if mmc_modes_name:
+ mmc_help = cons.run_command('mmc -help')
+ m = re.search(r"\[MMC_LEGACY(.*\n.+])", mmc_help)
+ modes = [
+ x.strip()
+ for x in m.group()
+ .replace('\n', '')
+ .replace('[', '')
+ .replace(']', '')
+ .split(',')
+ ]
+
+ for mode in mmc_modes_name:
+ mmc_modes += [modes.index(mode)]
+ else:
+ # Set mmc mode to default mode (legacy), if it is not defined in env
+ mmc_modes = [0]
def setup_mmc(u_boot_console):
if u_boot_console.config.env.get('env__mmc_device_test_skip', True):
pytest.skip('MMC device test is not enabled')
+ setup_mmc_modes(u_boot_console)
+
@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_list(u_boot_console):
setup_mmc(u_boot_console)
@@ -58,21 +97,22 @@
fail = 0
for x in range(0, controllers):
devices[x]['detected'] = 'yes'
- output = u_boot_console.run_command('mmc dev %d' % x)
- # Some sort of switch here
- if 'Card did not respond to voltage select' in output:
- fail = 1
- devices[x]['detected'] = 'no'
+ for y in mmc_modes:
+ output = u_boot_console.run_command('mmc dev %d 0 %d' % x, y)
- if 'no mmc device at slot' in output:
- devices[x]['detected'] = 'no'
+ if 'Card did not respond to voltage select' in output:
+ fail = 1
+ devices[x]['detected'] = 'no'
- if 'MMC: no card present' in output:
- devices[x]['detected'] = 'no'
+ if 'no mmc device at slot' in output:
+ devices[x]['detected'] = 'no'
- if fail:
- pytest.fail('Card not present')
+ if 'MMC: no card present' in output:
+ devices[x]['detected'] = 'no'
+
+ if fail:
+ pytest.fail('Card not present')
@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmcinfo(u_boot_console):
@@ -81,19 +121,22 @@
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
- output = u_boot_console.run_command('mmcinfo')
- if 'busy timeout' in output:
- pytest.skip('No SD/MMC/eMMC device present')
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d 0 %d' % x, y)
+ output = u_boot_console.run_command('mmcinfo')
+ if 'busy timeout' in output:
+ pytest.skip('No SD/MMC/eMMC device present')
- obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
- try:
- capacity = float(obj.groups()[0])
- print(capacity)
- devices[x]['capacity'] = capacity
- print('Capacity of dev %d is: %g GiB' % (x, capacity))
- except ValueError:
- pytest.fail('MMC capacity not recognized')
+ assert mmc_modes_name[mmc_modes.index(y)] in output
+
+ obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print(capacity)
+ devices[x]['capacity'] = capacity
+ print('Capacity of dev %d is: %g GiB' % (x, capacity))
+ except ValueError:
+ pytest.fail('MMC capacity not recognized')
@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_info(u_boot_console):
@@ -102,19 +145,21 @@
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d 0 %d' % x, y)
- output = u_boot_console.run_command('mmc info')
+ output = u_boot_console.run_command('mmc info')
+ assert mmc_modes_name[mmc_modes.index(y)] in output
- obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
- try:
- capacity = float(obj.groups()[0])
- print(capacity)
- if devices[x]['capacity'] != capacity:
- pytest.fail("MMC capacity doesn't match mmcinfo")
+ obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print(capacity)
+ if devices[x]['capacity'] != capacity:
+ pytest.fail("MMC capacity doesn't match mmcinfo")
- except ValueError:
- pytest.fail('MMC capacity not recognized')
+ except ValueError:
+ pytest.fail('MMC capacity not recognized')
@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_rescan(u_boot_console):
@@ -126,12 +171,13 @@
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
- output = u_boot_console.run_command('mmc rescan')
- if output:
- pytest.fail('mmc rescan has something to check')
- output = u_boot_console.run_command('echo $?')
- assert output.endswith('0')
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d 0 %d' % x, y)
+ output = u_boot_console.run_command('mmc rescan')
+ if output:
+ pytest.fail('mmc rescan has something to check')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_part(u_boot_console):
@@ -148,7 +194,8 @@
lines = output.split('\n')
part_fat = []
- part_ext = []
+ part_ext2 = []
+ part_ext4 = []
for line in lines:
obj = re.search(
r'(\d)\s+\d+\s+\d+\s+\w+\d+\w+-\d+\s+(\d+\w+)', line)
@@ -161,15 +208,21 @@
print('Fat detected')
part_fat.append(part_id)
elif part_type == '83':
- print('ext detected')
- part_ext.append(part_id)
+ print('ext(2/4) detected')
+ output = u_boot_console.run_command(
+ 'fstype mmc %d:%d' % x, part_id
+ )
+ if 'ext2' in output:
+ part_ext2.append(part_id)
+ elif 'ext4' in output:
+ part_ext4.append(part_id)
else:
pytest.fail('Unsupported Filesystem on device %d' % x)
- devices[x]['ext4'] = part_ext
- devices[x]['ext2'] = part_ext
+ devices[x]['ext4'] = part_ext4
+ devices[x]['ext2'] = part_ext2
devices[x]['fat'] = part_fat
- if not part_ext and not part_fat:
+ if not part_ext2 and not part_ext4 and not part_fat:
pytest.fail('No partition detected on device %d' % x)
@pytest.mark.buildconfigspec('cmd_mmc')
@@ -185,7 +238,6 @@
fs = 'fat'
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -193,20 +245,22 @@
continue
for part in partitions:
- output = u_boot_console.run_command(
- 'fatls mmc %d:%s' % (x, part))
- if 'Unrecognized filesystem type' in output:
- partitions.remove(part)
- pytest.fail('Unrecognized filesystem')
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ output = u_boot_console.run_command(
+ 'fatls mmc %d:%s' % (x, part))
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
- if not re.search(r'\d file\(s\), \d dir\(s\)', output):
- pytest.fail('%s read failed on device %d' % (fs.upper, x))
- output = u_boot_console.run_command(
- 'fatinfo mmc %d:%s' % (x, part))
- string = 'Filesystem: %s' % fs.upper
- if re.search(string, output):
- pytest.fail('%s FS failed on device %d' % (fs.upper(), x))
- part_detect = 1
+ if not re.search(r'\d file\(s\), \d dir\(s\)', output):
+ pytest.fail('%s read failed on device %d' % (fs.upper, x))
+ output = u_boot_console.run_command(
+ 'fatinfo mmc %d:%s' % (x, part))
+ string = 'Filesystem: %s' % fs.upper
+ if re.search(string, output):
+ pytest.fail('%s FS failed on device %d' % (fs.upper(), x))
+ part_detect = 1
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -226,7 +280,6 @@
fs = 'fat'
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -234,49 +287,51 @@
continue
for part in partitions:
- part_detect = 1
- addr = u_boot_utils.find_ram_base(u_boot_console)
- devices[x]['addr_%d' % part] = addr
- size = random.randint(4, 1 * 1024 * 1024)
- devices[x]['size_%d' % part] = size
- # count CRC32
- output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
- m = re.search('==> (.+?)', output)
- if not m:
- pytest.fail('CRC32 failed')
- expected_crc32 = m.group(1)
- devices[x]['expected_crc32_%d' % part] = expected_crc32
- # do write
- file = '%s_%d' % ('uboot_test', size)
- devices[x]['file_%d' % part] = file
- output = u_boot_console.run_command(
- '%swrite mmc %d:%s %x %s %x' % (fs, x, part, addr, file, size)
- )
- assert 'Unable to write' not in output
- assert 'Error' not in output
- assert 'overflow' not in output
- expected_text = '%d bytes written' % size
- assert expected_text in output
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]['addr_%d' % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]['size_%d' % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ expected_crc32 = m.group(1)
+ devices[x]['expected_crc32_%d' % part] = expected_crc32
+ # do write
+ file = '%s_%d' % ('uboot_test', size)
+ devices[x]['file_%d' % part] = file
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x %s %x' % (fs, x, part, addr, file, size)
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
- alignment = int(
- u_boot_console.config.buildconfig.get(
- 'config_sys_cacheline_size', 128
+ alignment = int(
+ u_boot_console.config.buildconfig.get(
+ 'config_sys_cacheline_size', 128
+ )
+ )
+ offset = random.randrange(alignment, 1024, alignment)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x %s' % (fs, x, part, addr + offset, file)
)
- )
- offset = random.randrange(alignment, 1024, alignment)
- output = u_boot_console.run_command(
- '%sload mmc %d:%s %x %s' % (fs, x, part, addr + offset, file)
- )
- assert 'Invalid FAT entry' not in output
- assert 'Unable to read file' not in output
- assert 'Misaligned buffer address' not in output
- expected_text = '%d bytes read' % size
- assert expected_text in output
+ assert 'Invalid FAT entry' not in output
+ assert 'Unable to read file' not in output
+ assert 'Misaligned buffer address' not in output
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
- output = u_boot_console.run_command(
- 'crc32 %x $filesize' % (addr + offset)
- )
- assert expected_crc32 in output
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -300,13 +355,16 @@
print('No %s table on this device' % fs.upper())
continue
- u_boot_console.run_command('mmc dev %d' % x)
for part in partitions:
- output = u_boot_console.run_command('%sls mmc %d:%s' % (fs, x, part))
- if 'Unrecognized filesystem type' in output:
- partitions.remove(part)
- pytest.fail('Unrecognized filesystem')
- part_detect = 1
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ output = u_boot_console.run_command(
+ '%sls mmc %d:%s' % (fs, x, part)
+ )
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
+ part_detect = 1
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -326,7 +384,6 @@
fs = 'ext4'
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -334,42 +391,44 @@
continue
for part in partitions:
- part_detect = 1
- addr = u_boot_utils.find_ram_base(u_boot_console)
- devices[x]['addr_%d' % part] = addr
- size = random.randint(4, 1 * 1024 * 1024)
- devices[x]['size_%d' % part] = size
- # count CRC32
- output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
- m = re.search('==> (.+?)', output)
- if not m:
- pytest.fail('CRC32 failed')
- expected_crc32 = m.group(1)
- devices[x]['expected_crc32_%d' % part] = expected_crc32
- # do write
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]['addr_%d' % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]['size_%d' % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ expected_crc32 = m.group(1)
+ devices[x]['expected_crc32_%d' % part] = expected_crc32
- file = '%s_%d' % ('uboot_test', size)
- devices[x]['file_%d' % part] = file
- output = u_boot_console.run_command(
- '%swrite mmc %d:%s %x /%s %x' % (fs, x, part, addr, file, size)
- )
- assert 'Unable to write' not in output
- assert 'Error' not in output
- assert 'overflow' not in output
- expected_text = '%d bytes written' % size
- assert expected_text in output
+ # do write
+ file = '%s_%d' % ('uboot_test', size)
+ devices[x]['file_%d' % part] = file
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x /%s %x' % (fs, x, part, addr, file, size)
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
- offset = random.randrange(128, 1024, 128)
- output = u_boot_console.run_command(
- '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
- )
- expected_text = '%d bytes read' % size
- assert expected_text in output
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
- output = u_boot_console.run_command(
- 'crc32 %x $filesize' % (addr + offset)
- )
- assert expected_crc32 in output
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -387,7 +446,6 @@
fs = 'ext2'
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -395,12 +453,16 @@
continue
for part in partitions:
- part_detect = 1
- output = u_boot_console.run_command('%sls mmc %d:%s' % (fs, x, part))
- if 'Unrecognized filesystem type' in output:
- partitions.remove(part)
- pytest.fail('Unrecognized filesystem')
- part_detect = 1
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ output = u_boot_console.run_command(
+ '%sls mmc %d:%s' % (fs, x, part)
+ )
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
+ part_detect = 1
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -421,7 +483,6 @@
fs = 'ext2'
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -429,23 +490,25 @@
continue
for part in partitions:
- part_detect = 1
- addr = devices[x]['addr_%d' % part]
- size = devices[x]['size_%d' % part]
- expected_crc32 = devices[x]['expected_crc32_%d' % part]
- file = devices[x]['file_%d' % part]
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = devices[x]['size_%d' % part]
+ expected_crc32 = devices[x]['expected_crc32_%d' % part]
+ file = devices[x]['file_%d' % part]
- offset = random.randrange(128, 1024, 128)
- output = u_boot_console.run_command(
- '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
- )
- expected_text = '%d bytes read' % size
- assert expected_text in output
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
- output = u_boot_console.run_command(
- 'crc32 %x $filesize' % (addr + offset)
- )
- assert expected_crc32 in output
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
@@ -462,8 +525,7 @@
part_detect = 0
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext4', 'ext2']:
try:
partitions = devices[x][fs]
except:
@@ -471,12 +533,14 @@
continue
for part in partitions:
- part_detect = 1
- output = u_boot_console.run_command('ls mmc %d:%s' % (x, part))
- if re.search(r'No \w+ table on this device', output):
- pytest.fail(
- '%s: Partition table not found %d' % (fs.upper(), x)
- )
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ output = u_boot_console.run_command('ls mmc %d:%s' % (x, part))
+ if re.search(r'No \w+ table on this device', output):
+ pytest.fail(
+ '%s: Partition table not found %d' % (fs.upper(), x)
+ )
if not part_detect:
pytest.skip('No partition detected')
@@ -493,8 +557,7 @@
part_detect = 0
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext4', 'ext2']:
try:
partitions = devices[x][fs]
except:
@@ -502,23 +565,25 @@
continue
for part in partitions:
- part_detect = 1
- addr = devices[x]['addr_%d' % part]
- size = devices[x]['size_%d' % part]
- expected_crc32 = devices[x]['expected_crc32_%d' % part]
- file = devices[x]['file_%d' % part]
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = devices[x]['size_%d' % part]
+ expected_crc32 = devices[x]['expected_crc32_%d' % part]
+ file = devices[x]['file_%d' % part]
- offset = random.randrange(128, 1024, 128)
- output = u_boot_console.run_command(
- 'load mmc %d:%s %x /%s' % (x, part, addr + offset, file)
- )
- expected_text = '%d bytes read' % size
- assert expected_text in output
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ 'load mmc %d:%s %x /%s' % (x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
- output = u_boot_console.run_command(
- 'crc32 %x $filesize' % (addr + offset)
- )
- assert expected_crc32 in output
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
if not part_detect:
pytest.skip('No partition detected')
@@ -535,8 +600,7 @@
part_detect = 0
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext4', 'ext2']:
try:
partitions = devices[x][fs]
except:
@@ -544,18 +608,20 @@
continue
for part in partitions:
- part_detect = 1
- addr = devices[x]['addr_%d' % part]
- size = 0
- file = devices[x]['file_%d' % part]
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = 0
+ file = devices[x]['file_%d' % part]
- offset = random.randrange(128, 1024, 128)
- output = u_boot_console.run_command(
- 'save mmc %d:%s %x /%s %d'
- % (x, part, addr + offset, file, size)
- )
- expected_text = '%d bytes written' % size
- assert expected_text in output
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ 'save mmc %d:%s %x /%s %d'
+ % (x, part, addr + offset, file, size)
+ )
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
if not part_detect:
pytest.skip('No partition detected')
@@ -582,7 +648,6 @@
for x in range(0, controllers):
if devices[x]['detected'] == 'yes':
- u_boot_console.run_command('mmc dev %d' % x)
try:
partitions = devices[x][fs]
except:
@@ -590,82 +655,86 @@
continue
for part in partitions:
- part_detect = 1
- addr = u_boot_utils.find_ram_base(u_boot_console)
- count_f = 0
- addr_l = []
- size_l = []
- file_l = []
- crc32_l = []
- offset_l = []
- addr_l.append(addr)
+ for y in mmc_modes:
+ u_boot_console.run_command('mmc dev %d %d %d' % x, part, y)
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ count_f = 0
+ addr_l = []
+ size_l = []
+ file_l = []
+ crc32_l = []
+ offset_l = []
+ addr_l.append(addr)
- while count_f < num_files:
- size_l.append(random.randint(4, 1 * 1024 * 1024))
+ while count_f < num_files:
+ size_l.append(random.randint(4, 1 * 1024 * 1024))
- # CRC32 count
- output = u_boot_console.run_command(
- 'crc32 %x %x' % (addr_l[count_f], size_l[count_f])
- )
- m = re.search('==> (.+?)', output)
- if not m:
- pytest.fail('CRC32 failed')
- crc32_l.append(m.group(1))
+ # CRC32 count
+ output = u_boot_console.run_command(
+ 'crc32 %x %x' % (addr_l[count_f], size_l[count_f])
+ )
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ crc32_l.append(m.group(1))
- # Write operation
- file_l.append('%s_%d_%d' % ('uboot_test', count_f, size_l[count_f]))
- output = u_boot_console.run_command(
- '%swrite mmc %d:%s %x %s %x'
- % (
- fs,
- x,
- part,
- addr_l[count_f],
- file_l[count_f],
- size_l[count_f],
+ # Write operation
+ file_l.append(
+ '%s_%d_%d' % ('uboot_test', count_f, size_l[count_f])
)
- )
- assert 'Unable to write' not in output
- assert 'Error' not in output
- assert 'overflow' not in output
- expected_text = '%d bytes written' % size_l[count_f]
- assert expected_text in output
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x %s %x'
+ % (
+ fs,
+ x,
+ part,
+ addr_l[count_f],
+ file_l[count_f],
+ size_l[count_f],
+ )
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size_l[count_f]
+ assert expected_text in output
- addr_l.append(addr_l[count_f] + size_l[count_f] + 1048576)
- count_f += 1
+ addr_l.append(addr_l[count_f] + size_l[count_f] + 1048576)
+ count_f += 1
- count_f = 0
- while count_f < num_files:
- alignment = int(
- u_boot_console.config.buildconfig.get(
- 'config_sys_cacheline_size', 128
+ count_f = 0
+ while count_f < num_files:
+ alignment = int(
+ u_boot_console.config.buildconfig.get(
+ 'config_sys_cacheline_size', 128
+ )
)
- )
- offset_l.append(random.randrange(alignment, 1024, alignment))
+ offset_l.append(random.randrange(alignment, 1024, alignment))
- # Read operation
- output = u_boot_console.run_command(
- '%sload mmc %d:%s %x %s'
- % (
- fs,
- x,
- part,
- addr_l[count_f] + offset_l[count_f],
- file_l[count_f],
+ # Read operation
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x %s'
+ % (
+ fs,
+ x,
+ part,
+ addr_l[count_f] + offset_l[count_f],
+ file_l[count_f],
+ )
)
- )
- assert 'Invalid FAT entry' not in output
- assert 'Unable to read file' not in output
- assert 'Misaligned buffer address' not in output
- expected_text = '%d bytes read' % size_l[count_f]
- assert expected_text in output
+ assert 'Invalid FAT entry' not in output
+ assert 'Unable to read file' not in output
+ assert 'Misaligned buffer address' not in output
+ expected_text = '%d bytes read' % size_l[count_f]
+ assert expected_text in output
- output = u_boot_console.run_command(
- 'crc32 %x $filesize' % (addr_l[count_f] + offset_l[count_f])
- )
- assert crc32_l[count_f] in output
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr_l[count_f] + offset_l[count_f])
+ )
+ assert crc32_l[count_f] in output
- count_f += 1
+ count_f += 1
if not part_detect:
pytest.skip('No %s partition detected' % fs.upper())
diff --git a/test/py/tests/test_usb.py b/test/py/tests/test_usb.py
index 2397fd3..e1f203b 100644
--- a/test/py/tests/test_usb.py
+++ b/test/py/tests/test_usb.py
@@ -227,7 +227,8 @@
lines = output.split('\n')
part_fat = []
- part_ext = []
+ part_ext2 = []
+ part_ext4 = []
for line in lines:
obj = re.search(r'(\d)\s+\d+\s+\d+\s+\w+\d+\w+-\d+\s+(\d+\w+)', line)
if obj:
@@ -239,15 +240,21 @@
print('Fat detected')
part_fat.append(part_id)
elif part_type == '83':
- print('ext detected')
- part_ext.append(part_id)
+ print('ext(2/4) detected')
+ output = u_boot_console.run_command(
+ 'fstype usb %d:%d' % i, part_id
+ )
+ if 'ext2' in output:
+ part_ext2.append(part_id)
+ elif 'ext4' in output:
+ part_ext4.append(part_id)
else:
pytest.fail('Unsupported Filesystem on device %d' % i)
- devices[i]['ext4'] = part_ext
- devices[i]['ext2'] = part_ext
+ devices[i]['ext4'] = part_ext4
+ devices[i]['ext2'] = part_ext2
devices[i]['fat'] = part_fat
- if not part_ext and not part_fat:
+ if not part_ext2 and not part_ext4 and not part_fat:
pytest.fail('No partition detected on device %d' % i)
return devices, controllers, storage_device
@@ -497,7 +504,7 @@
for part in partitions:
part_detect = 1
file, size, expected_crc32 = \
- usb_ext4load_ext4write(u_boot_console, 'ext4', x, part)
+ usb_ext4load_ext4write(u_boot_console, fs, x, part)
addr = u_boot_utils.find_ram_base(u_boot_console)
offset = random.randrange(128, 1024, 128)
@@ -526,7 +533,7 @@
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
@@ -556,7 +563,7 @@
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
@@ -570,7 +577,7 @@
if fs == 'fat':
file, size, expected_crc32 = \
usb_fatload_fatwrite(u_boot_console, fs, x, part)
- elif fs == 'ext4':
+ elif fs in ['ext4', 'ext2']:
file, size, expected_crc32 = \
usb_ext4load_ext4write(u_boot_console, fs, x, part)
@@ -600,7 +607,7 @@
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
diff --git a/test/py/tests/test_ut.py b/test/py/tests/test_ut.py
index 6d44191..10ec7e5 100644
--- a/test/py/tests/test_ut.py
+++ b/test/py/tests/test_ut.py
@@ -8,7 +8,6 @@
# Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
"""
import collections
-import getpass
import gzip
import os
import os.path
@@ -28,70 +27,36 @@
if not os.path.exists(dirname):
os.mkdir(dirname)
-def setup_image(cons, devnum, part_type, second_part=False, basename='mmc'):
- """Create a 20MB disk image with a single partition
+def setup_image(cons, devnum, part_type, img_size=20, second_part=False,
+ basename='mmc'):
+ """Create a disk image with a single partition
Args:
cons (ConsoleBase): Console to use
devnum (int): Device number to use, e.g. 1
part_type (int): Partition type, e.g. 0xc for FAT32
+ img_size (int): Image size in MiB
second_part (bool): True to contain a small second partition
basename (str): Base name to use in the filename, e.g. 'mmc'
Returns:
tuple:
str: Filename of MMC image
- str: Directory name of 'mnt' directory
+ str: Directory name of scratch directory
"""
fname = os.path.join(cons.config.source_dir, f'{basename}{devnum}.img')
- mnt = os.path.join(cons.config.persistent_data_dir, 'mnt')
+ mnt = os.path.join(cons.config.persistent_data_dir, 'scratch')
mkdir_cond(mnt)
- spec = f'type={part_type:x}, size=18M, bootable'
+ spec = f'type={part_type:x}, size={img_size - 2}M, start=1M, bootable'
if second_part:
spec += '\ntype=c'
u_boot_utils.run_and_log(cons, f'qemu-img create {fname} 20M')
- u_boot_utils.run_and_log(cons, f'sudo sfdisk {fname}',
+ u_boot_utils.run_and_log(cons, f'sfdisk {fname}',
stdin=spec.encode('utf-8'))
return fname, mnt
-def mount_image(cons, fname, mnt, fstype):
- """Create a filesystem and mount it on partition 1
-
- Args:
- cons (ConsoleBase): Console to use
- fname (str): Filename of MMC image
- mnt (str): Directory name of 'mnt' directory
- fstype (str): Filesystem type ('vfat' or 'ext4')
-
- Returns:
- str: Name of loop device used
- """
- out = u_boot_utils.run_and_log(cons, f'sudo losetup --show -f -P {fname}')
- loop = out.strip()
- part = f'{loop}p1'
- u_boot_utils.run_and_log(cons, f'sudo mkfs.{fstype} {part}')
- opts = ''
- if fstype == 'vfat':
- opts += f' -o uid={os.getuid()},gid={os.getgid()}'
- u_boot_utils.run_and_log(cons, f'sudo mount -o loop {part} {mnt}{opts}')
- u_boot_utils.run_and_log(cons, f'sudo chown {getpass.getuser()} {mnt}')
- return loop
-
-def copy_prepared_image(cons, devnum, fname, basename='mmc'):
- """Use a prepared image since we cannot create one
-
- Args:
- cons (ConsoleBase): Console touse
- devnum (int): device number
- fname (str): Filename of MMC image
- basename (str): Base name to use in the filename, e.g. 'mmc'
- """
- infname = os.path.join(cons.config.source_dir,
- f'test/py/tests/bootstd/{basename}{devnum}.img.xz')
- u_boot_utils.run_and_log(cons, ['sh', '-c', f'xz -dc {infname} >{fname}'])
-
def setup_bootmenu_image(cons):
"""Create a 20MB disk image with a single ext4 partition
@@ -100,14 +65,7 @@
mmc_dev = 4
fname, mnt = setup_image(cons, mmc_dev, 0x83)
- loop = None
- mounted = False
- complete = False
- try:
- loop = mount_image(cons, fname, mnt, 'ext4')
- mounted = True
-
- script = '''# DO NOT EDIT THIS FILE
+ script = '''# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#
@@ -181,64 +139,52 @@
# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
'''
- bootdir = os.path.join(mnt, 'boot')
- mkdir_cond(bootdir)
- cmd_fname = os.path.join(bootdir, 'boot.cmd')
- scr_fname = os.path.join(bootdir, 'boot.scr')
- with open(cmd_fname, 'w', encoding='ascii') as outf:
- print(script, file=outf)
-
- infname = os.path.join(cons.config.source_dir,
- 'test/py/tests/bootstd/armbian.bmp.xz')
- bmp_file = os.path.join(bootdir, 'boot.bmp')
- u_boot_utils.run_and_log(
- cons,
- ['sh', '-c', f'xz -dc {infname} >{bmp_file}'])
+ bootdir = os.path.join(mnt, 'boot')
+ mkdir_cond(bootdir)
+ cmd_fname = os.path.join(bootdir, 'boot.cmd')
+ scr_fname = os.path.join(bootdir, 'boot.scr')
+ with open(cmd_fname, 'w', encoding='ascii') as outf:
+ print(script, file=outf)
- u_boot_utils.run_and_log(
- cons, f'mkimage -C none -A arm -T script -d {cmd_fname} {scr_fname}')
-
- kernel = 'vmlinuz-5.15.63-rockchip64'
- target = os.path.join(bootdir, kernel)
- with open(target, 'wb') as outf:
- print('kernel', outf)
+ infname = os.path.join(cons.config.source_dir,
+ 'test/py/tests/bootstd/armbian.bmp.xz')
+ bmp_file = os.path.join(bootdir, 'boot.bmp')
+ u_boot_utils.run_and_log(
+ cons,
+ ['sh', '-c', f'xz -dc {infname} >{bmp_file}'])
- symlink = os.path.join(bootdir, 'Image')
- if os.path.exists(symlink):
- os.remove(symlink)
- u_boot_utils.run_and_log(
- cons, f'echo here {kernel} {symlink}')
- os.symlink(kernel, symlink)
+ mkimage = cons.config.build_dir + '/tools/mkimage'
+ u_boot_utils.run_and_log(
+ cons, f'{mkimage} -C none -A arm -T script -d {cmd_fname} {scr_fname}')
- complete = True
+ kernel = 'vmlinuz-5.15.63-rockchip64'
+ target = os.path.join(bootdir, kernel)
+ with open(target, 'wb') as outf:
+ print('kernel', outf)
- except ValueError as exc:
- print(f'Falled to create image, failing back to prepared copy: {exc}')
- finally:
- if mounted:
- u_boot_utils.run_and_log(cons, f'sudo umount --lazy {mnt}')
- if loop:
- u_boot_utils.run_and_log(cons, f'sudo losetup -d {loop}')
+ symlink = os.path.join(bootdir, 'Image')
+ if os.path.exists(symlink):
+ os.remove(symlink)
+ u_boot_utils.run_and_log(
+ cons, f'echo here {kernel} {symlink}')
+ os.symlink(kernel, symlink)
- if not complete:
- copy_prepared_image(cons, mmc_dev, fname)
+ fsfile = 'ext18M.img'
+ u_boot_utils.run_and_log(cons, f'fallocate -l 18M {fsfile}')
+ u_boot_utils.run_and_log(cons, f'mkfs.ext4 {fsfile} -d {mnt}')
+ u_boot_utils.run_and_log(cons, f'dd if={fsfile} of={fname} bs=1M seek=1')
+ u_boot_utils.run_and_log(cons, f'rm -rf {mnt}')
+ u_boot_utils.run_and_log(cons, f'rm -f {fsfile}')
def setup_bootflow_image(cons):
"""Create a 20MB disk image with a single FAT partition"""
mmc_dev = 1
fname, mnt = setup_image(cons, mmc_dev, 0xc, second_part=True)
- loop = None
- mounted = False
- complete = False
- try:
- loop = mount_image(cons, fname, mnt, 'vfat')
- mounted = True
-
- vmlinux = 'vmlinuz-5.3.7-301.fc31.armv7hl'
- initrd = 'initramfs-5.3.7-301.fc31.armv7hl.img'
- dtbdir = 'dtb-5.3.7-301.fc31.armv7hl'
- script = '''# extlinux.conf generated by appliance-creator
+ vmlinux = 'vmlinuz-5.3.7-301.fc31.armv7hl'
+ initrd = 'initramfs-5.3.7-301.fc31.armv7hl.img'
+ dtbdir = 'dtb-5.3.7-301.fc31.armv7hl'
+ script = '''# extlinux.conf generated by appliance-creator
ui menu.c32
menu autoboot Welcome to Fedora-Workstation-armhfp-31-1.9. Automatic boot in # second{,s}. Press a key for options.
menu title Fedora-Workstation-armhfp-31-1.9 Boot Options.
@@ -251,39 +197,36 @@
append ro root=UUID=9732b35b-4cd5-458b-9b91-80f7047e0b8a rhgb quiet LANG=en_US.UTF-8 cma=192MB cma=256MB
fdtdir /%s/
initrd /%s''' % (vmlinux, dtbdir, initrd)
- ext = os.path.join(mnt, 'extlinux')
- mkdir_cond(ext)
+ ext = os.path.join(mnt, 'extlinux')
+ mkdir_cond(ext)
- conf = os.path.join(ext, 'extlinux.conf')
- with open(conf, 'w', encoding='ascii') as fd:
- print(script, file=fd)
+ conf = os.path.join(ext, 'extlinux.conf')
+ with open(conf, 'w', encoding='ascii') as fd:
+ print(script, file=fd)
- inf = os.path.join(cons.config.persistent_data_dir, 'inf')
- with open(inf, 'wb') as fd:
- fd.write(gzip.compress(b'vmlinux'))
- u_boot_utils.run_and_log(
- cons, f'mkimage -f auto -d {inf} {os.path.join(mnt, vmlinux)}')
+ inf = os.path.join(cons.config.persistent_data_dir, 'inf')
+ with open(inf, 'wb') as fd:
+ fd.write(gzip.compress(b'vmlinux'))
+ mkimage = cons.config.build_dir + '/tools/mkimage'
+ u_boot_utils.run_and_log(
+ cons, f'{mkimage} -f auto -d {inf} {os.path.join(mnt, vmlinux)}')
- with open(os.path.join(mnt, initrd), 'w', encoding='ascii') as fd:
- print('initrd', file=fd)
+ with open(os.path.join(mnt, initrd), 'w', encoding='ascii') as fd:
+ print('initrd', file=fd)
- mkdir_cond(os.path.join(mnt, dtbdir))
+ mkdir_cond(os.path.join(mnt, dtbdir))
- dtb_file = os.path.join(mnt, f'{dtbdir}/sandbox.dtb')
- u_boot_utils.run_and_log(
- cons, f'dtc -o {dtb_file}', stdin=b'/dts-v1/; / {};')
- complete = True
- except ValueError as exc:
- print(f'Falled to create image, failing back to prepared copy: {exc}')
- finally:
- if mounted:
- u_boot_utils.run_and_log(cons, f'sudo umount --lazy {mnt}')
- if loop:
- u_boot_utils.run_and_log(cons, f'sudo losetup -d {loop}')
-
- if not complete:
- copy_prepared_image(cons, mmc_dev, fname)
+ dtb_file = os.path.join(mnt, f'{dtbdir}/sandbox.dtb')
+ u_boot_utils.run_and_log(
+ cons, f'dtc -o {dtb_file}', stdin=b'/dts-v1/; / {};')
+ fsfile = 'vfat18M.img'
+ u_boot_utils.run_and_log(cons, f'fallocate -l 18M {fsfile}')
+ u_boot_utils.run_and_log(cons, f'mkfs.vfat {fsfile}')
+ u_boot_utils.run_and_log(cons, ['sh', '-c', f'mcopy -i {fsfile} {mnt}/* ::/'])
+ u_boot_utils.run_and_log(cons, f'dd if={fsfile} of={fname} bs=1M seek=1')
+ u_boot_utils.run_and_log(cons, f'rm -rf {mnt}')
+ u_boot_utils.run_and_log(cons, f'rm -f {fsfile}')
def setup_cros_image(cons):
"""Create a 20MB disk image with ChromiumOS partitions"""
@@ -334,8 +277,6 @@
mmc_dev = 5
fname = os.path.join(cons.config.source_dir, f'mmc{mmc_dev}.img')
u_boot_utils.run_and_log(cons, f'qemu-img create {fname} 20M')
- #mnt = os.path.join(cons.config.persistent_data_dir, 'mnt')
- #mkdir_cond(mnt)
u_boot_utils.run_and_log(cons, f'cgpt create {fname}')
uuid_state = 'ebd0a0a2-b9e5-4433-87c0-68b6b72699c7'
@@ -501,6 +442,55 @@
print(f'wrote to {fname}')
+ mmc_dev = 8
+ fname = os.path.join(cons.config.source_dir, f'mmc{mmc_dev}.img')
+ u_boot_utils.run_and_log(cons, f'qemu-img create {fname} 20M')
+ u_boot_utils.run_and_log(cons, f'cgpt create {fname}')
+
+ ptr = 40
+
+ # Number of sectors in 1MB
+ sect_size = 512
+ sect_1mb = (1 << 20) // sect_size
+
+ required_parts = [
+ {'num': 1, 'label':'misc', 'size': '1M'},
+ {'num': 2, 'label':'boot_a', 'size': '4M'},
+ {'num': 3, 'label':'boot_b', 'size': '4M'},
+ ]
+
+ for part in required_parts:
+ size_str = part['size']
+ if 'M' in size_str:
+ size = int(size_str[:-1]) * sect_1mb
+ else:
+ size = int(size_str)
+ u_boot_utils.run_and_log(
+ cons,
+ f"cgpt add -i {part['num']} -b {ptr} -s {size} -l {part['label']} -t basicdata {fname}")
+ ptr += size
+
+ u_boot_utils.run_and_log(cons, f'cgpt boot -p {fname}')
+ out = u_boot_utils.run_and_log(cons, f'cgpt show -q {fname}')
+
+ # Create a dict (indexed by partition number) containing the above info
+ for line in out.splitlines():
+ start, size, num, name = line.split(maxsplit=3)
+ parts[int(num)] = Partition(int(start), int(size), name)
+
+ with open(fname, 'rb') as inf:
+ disk_data = inf.read()
+
+ test_abootimg.AbootimgTestDiskImage(cons, 'boot.img', test_abootimg.img_hex)
+ boot_img = os.path.join(cons.config.result_dir, 'boot.img')
+ with open(boot_img, 'rb') as inf:
+ set_part_data(2, inf.read())
+
+ with open(fname, 'wb') as outf:
+ outf.write(disk_data)
+
+ print(f'wrote to {fname}')
+
return fname
def setup_cedit_file(cons):
@@ -540,8 +530,8 @@
u_boot_utils.run_and_log(
u_boot_console, f'sfdisk {fn}', stdin=b'type=83')
- fs_helper.mk_fs(u_boot_console.config, 'ext2', 0x200000, '2MB')
- fs_helper.mk_fs(u_boot_console.config, 'fat32', 0x100000, '1MB')
+ fs_helper.mk_fs(u_boot_console.config, 'ext2', 0x200000, '2MB', None)
+ fs_helper.mk_fs(u_boot_console.config, 'fat32', 0x100000, '1MB', None)
mmc_dev = 6
fn = os.path.join(u_boot_console.config.source_dir, f'mmc{mmc_dev}.img')
@@ -557,35 +547,23 @@
fname, mnt = setup_image(cons, devnum, 0xc, second_part=True,
basename=basename)
- loop = None
- mounted = False
- complete = False
- try:
- loop = mount_image(cons, fname, mnt, 'ext4')
- mounted = True
- efi_dir = os.path.join(mnt, 'EFI')
- mkdir_cond(efi_dir)
- bootdir = os.path.join(efi_dir, 'BOOT')
- mkdir_cond(bootdir)
- efi_src = os.path.join(cons.config.build_dir,
- f'lib/efi_loader/testapp.efi')
- efi_dst = os.path.join(bootdir, 'BOOTSBOX.EFI')
- with open(efi_src, 'rb') as inf:
- with open(efi_dst, 'wb') as outf:
- outf.write(inf.read())
- complete = True
- except ValueError as exc:
- print(f'Falled to create image, failing back to prepared copy: {exc}')
-
- finally:
- if mounted:
- u_boot_utils.run_and_log(cons, 'sudo umount --lazy %s' % mnt)
- if loop:
- u_boot_utils.run_and_log(cons, 'sudo losetup -d %s' % loop)
-
- if not complete:
- copy_prepared_image(cons, devnum, fname, basename)
-
+ efi_dir = os.path.join(mnt, 'EFI')
+ mkdir_cond(efi_dir)
+ bootdir = os.path.join(efi_dir, 'BOOT')
+ mkdir_cond(bootdir)
+ efi_src = os.path.join(cons.config.build_dir,
+ 'lib/efi_loader/testapp.efi')
+ efi_dst = os.path.join(bootdir, 'BOOTSBOX.EFI')
+ with open(efi_src, 'rb') as inf:
+ with open(efi_dst, 'wb') as outf:
+ outf.write(inf.read())
+ fsfile = 'vfat18M.img'
+ u_boot_utils.run_and_log(cons, f'fallocate -l 18M {fsfile}')
+ u_boot_utils.run_and_log(cons, f'mkfs.vfat {fsfile}')
+ u_boot_utils.run_and_log(cons, ['sh', '-c', f'mcopy -vs -i {fsfile} {mnt}/* ::/'])
+ u_boot_utils.run_and_log(cons, f'dd if={fsfile} of={fname} bs=1M seek=1')
+ u_boot_utils.run_and_log(cons, f'rm -rf {mnt}')
+ u_boot_utils.run_and_log(cons, f'rm -f {fsfile}')
@pytest.mark.buildconfigspec('cmd_bootflow')
@pytest.mark.buildconfigspec('sandbox')
diff --git a/test/py/tests/test_zynqmp_rpu.py b/test/py/tests/test_zynqmp_rpu.py
index 479a612..22f687d 100644
--- a/test/py/tests/test_zynqmp_rpu.py
+++ b/test/py/tests/test_zynqmp_rpu.py
@@ -70,7 +70,7 @@
# Initialize tcm
def tcminit(u_boot_console, rpu_mode):
- output = u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
+ output = u_boot_console.run_command(f'zynqmp tcminit {rpu_mode}')
assert 'Initializing TCM overwrites TCM content' in output
return ret_code(u_boot_console)
@@ -89,6 +89,13 @@
for num in cpu_nums:
u_boot_console.run_command(f'cpu {num} disable')
+# Get random RPU mode between string and integer
+def get_rpu_mode(rpu_mode):
+ if rpu_mode == 0 or rpu_mode == 'lockstep':
+ return random.choice(['lockstep', 0])
+ elif rpu_mode == 1 or rpu_mode == 'split':
+ return random.choice(['split', 1])
+
# Load apps on RPU cores
def rpu_apps_load(u_boot_console, rpu_mode):
apps, procs, cpu_nums, addrs, outputs, tftp_addrs = get_rpu_apps_env(
@@ -98,20 +105,20 @@
test_net.test_net_setup_static(u_boot_console)
try:
- assert tcminit(u_boot_console, rpu_mode).endswith('0')
+ assert tcminit(u_boot_console, get_rpu_mode(rpu_mode)).endswith('0')
for i in range(len(apps)):
if rpu_mode == 'lockstep' and procs[i] != 'rpu0':
continue
load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
- rel_addr = int(addrs[i] + 0x3C)
+ rel_addr = hex(int(addrs[i] + 0x3C))
# Release cpu at app load address
cpu_num = cpu_nums[i]
- cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+ cmd = f'cpu {cpu_num} release {rel_addr} {rpu_mode}'
output = u_boot_console.run_command(cmd)
- exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+ exp_op = f'Using TCM jump trampoline for address {rel_addr}'
assert exp_op in output
assert f'R5 {rpu_mode} mode' in output
u_boot_console.wait_for(outputs[i])
@@ -133,16 +140,13 @@
u_boot_console)
# Invalid commands
- u_boot_console.run_command('zynqmp tcminit mode')
- assert ret_code(u_boot_console).endswith('1')
-
rand_str = ''.join(random.choices(string.ascii_lowercase, k=4))
- u_boot_console.run_command('zynqmp tcminit %s' % rand_str)
- assert ret_code(u_boot_console).endswith('1')
-
rand_num = random.randint(2, 100)
- u_boot_console.run_command('zynqmp tcminit %d' % rand_num)
- assert ret_code(u_boot_console).endswith('1')
+ inv_modes = ['mode', rand_str, rand_num, 'splittt', 'locksteppp', '00', 11]
+
+ for mode in inv_modes:
+ u_boot_console.run_command(f'zynqmp tcminit {mode}')
+ assert ret_code(u_boot_console).endswith('1')
test_net.test_net_dhcp(u_boot_console)
if not test_net.net_set_up:
@@ -150,56 +154,66 @@
try:
rpu_mode = 'split'
- assert tcminit(u_boot_console, rpu_mode).endswith('0')
+ assert tcminit(u_boot_console, get_rpu_mode(rpu_mode)).endswith('0')
+ inv_modes += [0, 1]
for i in range(len(apps)):
load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
# Run in split mode at different load address
- rel_addr = int(addrs[i]) + random.randint(200, 1000)
+ rel_addr = hex(int(addrs[i]) + random.randint(200, 1000))
cpu_num = cpu_nums[i]
- cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+ cmd = f'cpu {cpu_num} release {rel_addr} {rpu_mode}'
output = u_boot_console.run_command(cmd)
- exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+ exp_op = f'Using TCM jump trampoline for address {rel_addr}'
assert exp_op in output
assert f'R5 {rpu_mode} mode' in output
assert not outputs[i] in output
# Invalid rpu mode
- rand_str = ''.join(random.choices(string.ascii_lowercase, k=4))
- cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rand_str)
- output = u_boot_console.run_command(cmd)
- assert exp_op in output
- assert f'Unsupported mode' in output
- assert not ret_code(u_boot_console).endswith('0')
+ for mode in inv_modes:
+ cmd = f'cpu {cpu_num} release {rel_addr} {mode}'
+ output = u_boot_console.run_command(cmd)
+ assert exp_op in output
+ assert f'Unsupported mode' in output
+ assert not ret_code(u_boot_console).endswith('0')
# Switch to lockstep mode, without disabling CPUs
rpu_mode = 'lockstep'
- u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
- assert not ret_code(u_boot_console).endswith('0')
+ output = u_boot_console.run_command(
+ f'zynqmp tcminit {get_rpu_mode(rpu_mode)}'
+ )
+ assert 'ERROR: ' in output
# Disable cpus
disable_cpus(u_boot_console, cpu_nums)
# Switch to lockstep mode, after disabling CPUs
- output = u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
+ output = u_boot_console.run_command(
+ f'zynqmp tcminit {get_rpu_mode(rpu_mode)}'
+ )
assert 'Initializing TCM overwrites TCM content' in output
assert ret_code(u_boot_console).endswith('0')
- # Run lockstep mode for RPU1
+ # Run lockstep mode for RPU1/RPU0
for i in range(len(apps)):
- if procs[i] == 'rpu0':
- continue
-
load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
- rel_addr = int(addrs[i] + 0x3C)
+ rel_addr = hex(int(addrs[i] + 0x3C))
cpu_num = cpu_nums[i]
- cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+ cmd = f'cpu {cpu_num} release {rel_addr} {rpu_mode}'
output = u_boot_console.run_command(cmd)
- exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+ exp_op = f'Using TCM jump trampoline for address {rel_addr}'
assert exp_op in output
- assert f'R5 {rpu_mode} mode' in output
- assert u_boot_console.p.expect([outputs[i]])
+
+ if procs[i] == 'rpu1':
+ assert 'Lockstep mode should run on ZYNQMP_CORE_RPU0' in output
+ assert not ret_code(u_boot_console).endswith('0')
+ elif procs[i] == 'rpu0':
+ assert f'R5 {rpu_mode} mode' in output
+ u_boot_console.wait_for(outputs[i])
+ assert ret_code(u_boot_console).endswith('0')
+ else:
+ assert False, 'ERROR: Invalid processor!'
finally:
disable_cpus(u_boot_console, cpu_nums)
# This forces the console object to be shutdown, so any subsequent test
diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py
index fa9cd57..7eaceb3 100644
--- a/test/py/u_boot_console_base.py
+++ b/test/py/u_boot_console_base.py
@@ -342,11 +342,12 @@
# indentation.
return self.p.before.strip('\r\n')
except Timeout as exc:
- handle_exception(self.config, self, self.log, exc, 'Lab failure',
- True)
+ handle_exception(self.config, self, self.log, exc,
+ f"Lab failure: Timeout executing '{cmd}'", True)
raise
except BootFail as exc:
- handle_exception(self.config, self, self.log, exc, 'Boot fail',
+ handle_exception(self.config, self, self.log, exc,
+ f"'Boot fail '{cmd}'",
True, self.get_spawn_output())
raise
finally:
diff --git a/tools/buildman/boards.py b/tools/buildman/boards.py
index 3c28227..9e7b486 100644
--- a/tools/buildman/boards.py
+++ b/tools/buildman/boards.py
@@ -19,7 +19,10 @@
from buildman import board
from buildman import kconfiglib
+from u_boot_pylib import command
from u_boot_pylib.terminal import print_clear, tprint
+from u_boot_pylib import tools
+from u_boot_pylib import tout
### constant variables ###
OUTPUT_FILE = 'boards.cfg'
@@ -202,6 +205,7 @@
os.environ['KCONFIG_OBJDIR'] = ''
self._tmpfile = None
self._conf = kconfiglib.Kconfig(warn=False)
+ self._srctree = srctree
def __del__(self):
"""Delete a leftover temporary file before exit.
@@ -239,7 +243,26 @@
expect_target, match, rear = leaf.partition('_defconfig')
assert match and not rear, f'{leaf} : invalid defconfig'
- self._conf.load_config(defconfig)
+ temp = None
+ if b'#include' in tools.read_file(defconfig):
+ cmd = [
+ os.getenv('CPP', 'cpp'),
+ '-nostdinc', '-P',
+ '-I', self._srctree,
+ '-undef',
+ '-x', 'assembler-with-cpp',
+ defconfig]
+ result = command.run_pipe([cmd], capture=True, capture_stderr=True)
+ temp = tempfile.NamedTemporaryFile(prefix='buildman-')
+ tools.write_file(temp.name, result.stdout, False)
+ fname = temp.name
+ tout.info(f'Processing #include to produce {defconfig}')
+ else:
+ fname = defconfig
+
+ self._conf.load_config(fname)
+ if temp:
+ del temp
self._tmpfile = None
params = {}
diff --git a/tools/buildman/buildman.rst b/tools/buildman/buildman.rst
index e873611..924564b 100644
--- a/tools/buildman/buildman.rst
+++ b/tools/buildman/buildman.rst
@@ -186,23 +186,22 @@
#. Create ~/.buildman to tell buildman where to find tool chains (see
buildman_settings_ for details). As an example::
- # Buildman settings file
+ # Buildman settings file
- [toolchain]
- root: /
- rest: /toolchains/*
- eldk: /opt/eldk-4.2
- arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
- aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
+ [toolchain]
+ root: /
+ rest: /toolchains/*
+ eldk: /opt/eldk-4.2
+ arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
+ aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
- [toolchain-prefix]
- arc = /opt/arc/arc_gnu_2021.03_prebuilt_elf32_le_linux_install/bin/arc-elf32-
-
- [toolchain-alias]
- riscv = riscv32
- sh = sh4
- x86: i386
+ [toolchain-prefix]
+ arc = /opt/arc/arc_gnu_2021.03_prebuilt_elf32_le_linux_install/bin/arc-elf32-
+ [toolchain-alias]
+ riscv = riscv32
+ sh = sh4
+ x86: i386
This selects the available toolchain paths. Add the base directory for
each of your toolchains here. Buildman will search inside these directories
@@ -934,6 +933,18 @@
For example powerpc-linux-gcc will be noted as a toolchain for 'powerpc'
and CROSS_COMPILE will be set to powerpc-linux- when using it.
+ The tilde character ``~`` is supported in paths, to represent the home
+ directory.
+
+'[toolchain-prefix]' section
+ This can be used to provide the full toolchain-prefix for one or more
+ architectures. The full CROSS_COMPILE prefix must be provided. These
+ typically have a higher priority than matches in the '[toolchain]', due to
+ this prefix.
+
+ The tilde character ``~`` is supported in paths, to represent the home
+ directory.
+
'[toolchain-alias]' section
This converts toolchain architecture names to U-Boot names. For example,
if an x86 toolchains is called i386-linux-gcc it will not normally be
@@ -1112,6 +1123,30 @@
Internally, buildman writes out an out-env file into the build directory for
later comparison.
+defconfig fragments
+-------------------
+
+Buildman provides some initial support for configuration fragments. It can scan
+these when present in defconfig files and handle the resuiting Kconfig
+correctly. Thus it is possible to build a board which has a ``#include`` in the
+defconfig file.
+
+For now, Buildman simply includes the files to produce a single output file,
+using the C preprocessor. It does not call the ``merge_config.sh`` script. The
+redefined/redundant logic in that script could fairly easily be repeated in
+Buildman, to detect potential problems. For now it is not clear that this is
+useful.
+
+To specify the C preprocessor to use, set the ``CPP`` environment variable. The
+default is ``cpp``.
+
+Note that Buildman does not support adding fragments to existing boards, e.g.
+like::
+
+ make qemu_riscv64_defconfig acpi.config
+
+This is partly because there is no way for Buildman to know which fragments are
+valid on which boards.
Building with clang
-------------------
diff --git a/tools/buildman/func_test.py b/tools/buildman/func_test.py
index 0ac9fc7..4e12c67 100644
--- a/tools/buildman/func_test.py
+++ b/tools/buildman/func_test.py
@@ -2,8 +2,10 @@
# Copyright (c) 2014 Google, Inc
#
+import io
import os
from pathlib import Path
+import re
import shutil
import sys
import tempfile
@@ -373,6 +375,22 @@
def _HandleCommandSize(self, args):
return command.CommandResult(return_code=0)
+ def _HandleCommandCpp(self, args):
+ # args ['-nostdinc', '-P', '-I', '/tmp/tmp7f17xk_o/src', '-undef',
+ # '-x', 'assembler-with-cpp', fname]
+ fname = args[7]
+ buf = io.StringIO()
+ for line in tools.read_file(fname, False).splitlines():
+ if line.startswith('#include'):
+ # Example: #include <configs/renesas_rcar2.config>
+ m_incfname = re.match('#include <(.*)>', line)
+ data = tools.read_file(m_incfname.group(1), False)
+ for line in data.splitlines():
+ print(line, file=buf)
+ else:
+ print(line, file=buf)
+ return command.CommandResult(stdout=buf.getvalue(), return_code=0)
+
def _HandleCommand(self, **kwargs):
"""Handle a command execution.
@@ -406,6 +424,8 @@
return self._HandleCommandObjcopy(args)
elif cmd.endswith( 'size'):
return self._HandleCommandSize(args)
+ elif cmd.endswith( 'cpp'):
+ return self._HandleCommandCpp(args)
if not result:
# Not handled, so abort
@@ -1067,3 +1087,68 @@
result = self._RunControl('--print-arch', 'board0')
self.assertEqual('arm\n', stdout.getvalue())
self.assertEqual('', stderr.getvalue())
+
+ def test_kconfig_scanner(self):
+ """Test using the kconfig scanner to determine important values
+
+ Note that there is already a test_scan_defconfigs() which checks the
+ higher-level scan_defconfigs() function. This test checks just the
+ scanner itself
+ """
+ src = self._git_dir
+ scanner = boards.KconfigScanner(src)
+
+ # First do a simple sanity check
+ norm = os.path.join(src, 'board0_defconfig')
+ tools.write_file(norm, 'CONFIG_TARGET_BOARD0=y', False)
+ res = scanner.scan(norm, True)
+ self.assertEqual(({
+ 'arch': 'arm',
+ 'cpu': 'armv7',
+ 'soc': '-',
+ 'vendor': 'Tester',
+ 'board': 'ARM Board 0',
+ 'config': 'config0',
+ 'target': 'board0'}, []), res)
+
+ # Check that the SoC cannot be changed and the filename does not affect
+ # the resulting board
+ tools.write_file(norm, '''CONFIG_TARGET_BOARD2=y
+CONFIG_SOC="fred"
+''', False)
+ res = scanner.scan(norm, True)
+ self.assertEqual(({
+ 'arch': 'powerpc',
+ 'cpu': 'ppc',
+ 'soc': 'mpc85xx',
+ 'vendor': 'Tester',
+ 'board': 'PowerPC board 1',
+ 'config': 'config2',
+ 'target': 'board0'}, []), res)
+
+ # Check handling of missing information
+ tools.write_file(norm, '', False)
+ res = scanner.scan(norm, True)
+ self.assertEqual(({
+ 'arch': '-',
+ 'cpu': '-',
+ 'soc': '-',
+ 'vendor': '-',
+ 'board': '-',
+ 'config': '-',
+ 'target': 'board0'},
+ ['WARNING: board0_defconfig: No TARGET_BOARD0 enabled']), res)
+
+ # check handling of #include files; see _HandleCommandCpp()
+ inc = os.path.join(src, 'common')
+ tools.write_file(inc, b'CONFIG_TARGET_BOARD0=y\n')
+ tools.write_file(norm, f'#include <{inc}>', False)
+ res = scanner.scan(norm, True)
+ self.assertEqual(({
+ 'arch': 'arm',
+ 'cpu': 'armv7',
+ 'soc': '-',
+ 'vendor': 'Tester',
+ 'board': 'ARM Board 0',
+ 'config': 'config0',
+ 'target': 'board0'}, []), res)
diff --git a/tools/buildman/main.py b/tools/buildman/main.py
index 3cf877e..a948f36 100755
--- a/tools/buildman/main.py
+++ b/tools/buildman/main.py
@@ -25,6 +25,7 @@
from buildman import control
from u_boot_pylib import test_util
from u_boot_pylib import tools
+from u_boot_pylib import tout
def run_tests(skip_net_tests, debug, verbose, args):
"""Run the buildman tests
@@ -93,8 +94,12 @@
# Build selected commits for selected boards
else:
- bsettings.setup(args.config_file)
- ret_code = control.do_buildman(args)
+ try:
+ tout.init(tout.INFO if args.verbose else tout.WARNING)
+ bsettings.setup(args.config_file)
+ ret_code = control.do_buildman(args)
+ finally:
+ tout.uninit()
return ret_code
diff --git a/tools/buildman/test.py b/tools/buildman/test.py
index 15801f6..385a34e 100644
--- a/tools/buildman/test.py
+++ b/tools/buildman/test.py
@@ -46,6 +46,16 @@
wrapper = ccache
'''
+settings_data_homedir = '''
+# Buildman settings file
+
+[toolchain]
+main = ~/mypath
+
+[toolchain-prefix]
+x86 = ~/mypath-x86-
+'''
+
migration = '''===================== WARNING ======================
This board does not use CONFIG_DM. CONFIG_DM will be
compulsory starting with the v2020.01 release.
@@ -1030,6 +1040,46 @@
finally:
os.environ['PATH'] = old_path
+ def testHomedir(self):
+ """Test using ~ in a toolchain or toolchain-prefix section"""
+ # Add some test settings
+ bsettings.setup(None)
+ bsettings.add_file(settings_data_homedir)
+
+ # Set up the toolchains
+ home = os.path.expanduser('~')
+ toolchains = toolchain.Toolchains()
+ toolchains.GetSettings()
+ self.assertEqual([f'{home}/mypath'], toolchains.paths)
+
+ # Check scanning
+ with test_util.capture_sys_output() as (stdout, _):
+ toolchains.Scan(verbose=True, raise_on_error=False)
+ lines = iter(stdout.getvalue().splitlines() + ['##done'])
+ self.assertEqual('Scanning for tool chains', next(lines))
+ self.assertEqual(f" - scanning prefix '{home}/mypath-x86-'",
+ next(lines))
+ self.assertEqual(
+ f"Error: No tool chain found for prefix '{home}/mypath-x86-gcc'",
+ next(lines))
+ self.assertEqual(f" - scanning path '{home}/mypath'", next(lines))
+ self.assertEqual(f" - looking in '{home}/mypath/.'", next(lines))
+ self.assertEqual(f" - looking in '{home}/mypath/bin'", next(lines))
+ self.assertEqual(f" - looking in '{home}/mypath/usr/bin'",
+ next(lines))
+ self.assertEqual('##done', next(lines))
+
+ # Check adding a toolchain
+ with test_util.capture_sys_output() as (stdout, _):
+ toolchains.Add('~/aarch64-linux-gcc', test=True, verbose=True)
+ lines = iter(stdout.getvalue().splitlines() + ['##done'])
+ self.assertEqual('Tool chain test: BAD', next(lines))
+ self.assertEqual(f'Command: {home}/aarch64-linux-gcc --version',
+ next(lines))
+ self.assertEqual('', next(lines))
+ self.assertEqual('', next(lines))
+ self.assertEqual('##done', next(lines))
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py
index 0c8a4fa..958f36f 100644
--- a/tools/buildman/toolchain.py
+++ b/tools/buildman/toolchain.py
@@ -65,12 +65,13 @@
"""Create a new toolchain object.
Args:
- fname: Filename of the gcc component
+ fname: Filename of the gcc component, possibly with ~ or $HOME in it
test: True to run the toolchain to test it
verbose: True to print out the information
priority: Priority to use for this toolchain, or PRIORITY_CALC to
calculate it
"""
+ fname = os.path.expanduser(fname)
self.gcc = fname
self.path = os.path.dirname(fname)
self.override_toolchain = override_toolchain
@@ -109,7 +110,7 @@
self.priority))
else:
print('BAD')
- print('Command: ', cmd)
+ print(f"Command: {' '.join(cmd)}")
print(result.stdout)
print(result.stderr)
else:
@@ -296,10 +297,11 @@
paths = []
for name, value in toolchains:
+ fname = os.path.expanduser(value)
if '*' in value:
- paths += glob.glob(value)
+ paths += glob.glob(fname)
else:
- paths.append(value)
+ paths.append(fname)
return paths
def GetSettings(self, show_warning=True):
@@ -327,16 +329,17 @@
toolchain = Toolchain(fname, test, verbose, priority, arch,
self.override_toolchain)
add_it = toolchain.ok
- if toolchain.arch in self.toolchains:
- add_it = (toolchain.priority <
- self.toolchains[toolchain.arch].priority)
if add_it:
- self.toolchains[toolchain.arch] = toolchain
- elif verbose:
- print(("Toolchain '%s' at priority %d will be ignored because "
- "another toolchain for arch '%s' has priority %d" %
- (toolchain.gcc, toolchain.priority, toolchain.arch,
- self.toolchains[toolchain.arch].priority)))
+ if toolchain.arch in self.toolchains:
+ add_it = (toolchain.priority <
+ self.toolchains[toolchain.arch].priority)
+ if add_it:
+ self.toolchains[toolchain.arch] = toolchain
+ elif verbose:
+ print(("Toolchain '%s' at priority %d will be ignored because "
+ "another toolchain for arch '%s' has priority %d" %
+ (toolchain.gcc, toolchain.priority, toolchain.arch,
+ self.toolchains[toolchain.arch].priority)))
def ScanPath(self, path, verbose):
"""Scan a path for a valid toolchain
@@ -372,7 +375,7 @@
pathname_list.append(pathname)
return pathname_list
- def Scan(self, verbose):
+ def Scan(self, verbose, raise_on_error=True):
"""Scan for available toolchains and select the best for each arch.
We look for all the toolchains we can file, figure out the
@@ -384,11 +387,12 @@
"""
if verbose: print('Scanning for tool chains')
for name, value in self.prefixes:
- if verbose: print(" - scanning prefix '%s'" % value)
- if os.path.exists(value):
- self.Add(value, True, verbose, PRIORITY_FULL_PREFIX, name)
+ fname = os.path.expanduser(value)
+ if verbose: print(" - scanning prefix '%s'" % fname)
+ if os.path.exists(fname):
+ self.Add(fname, True, verbose, PRIORITY_FULL_PREFIX, name)
continue
- fname = value + 'gcc'
+ fname += 'gcc'
if os.path.exists(fname):
self.Add(fname, True, verbose, PRIORITY_PREFIX_GCC, name)
continue
@@ -396,8 +400,11 @@
for f in fname_list:
self.Add(f, True, verbose, PRIORITY_PREFIX_GCC_PATH, name)
if not fname_list:
- raise ValueError("No tool chain found for prefix '%s'" %
- value)
+ msg = f"No tool chain found for prefix '{fname}'"
+ if raise_on_error:
+ raise ValueError(msg)
+ else:
+ print(f'Error: {msg}')
for path in self.paths:
if verbose: print(" - scanning path '%s'" % path)
fnames = self.ScanPath(path, verbose)
diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile
index 967ac89..ce1ad7c 100644
--- a/tools/docker/Dockerfile
+++ b/tools/docker/Dockerfile
@@ -6,33 +6,58 @@
LABEL org.opencontainers.image.authors="Tom Rini <trini@konsulko.com>"
LABEL org.opencontainers.image.description=" This image is for building U-Boot inside a container"
+# Used by docker to set the target platform: valid values are linux/arm64/v8
+# and linux/amd64
+ARG TARGETPLATFORM
+
+# Used by docker to set the build platform: the only valid value is linux/amd64
+ARG BUILDPLATFORM
+
# Make sure apt is happy
ENV DEBIAN_FRONTEND=noninteractive
+# Set architectures to build for (leaving out ARM which is an exception)
+ENV ARCHS="aarch64 arc i386 m68k mips microblaze nios2 powerpc riscv64 riscv32 sh2 x86_64"
+
+# Mirror containing the toolchains
+ENV MIRROR=https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin
+
+# Toolchain version
+ENV TCVER=13.2.0
+
+RUN echo "Building on $BUILDPLATFORM, for target $TARGETPLATFORM"
+
# Add LLVM repository
-RUN apt-get update && apt-get install -y gnupg2 wget xz-utils && rm -rf /var/lib/apt/lists/*
+RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
+ --mount=type=cache,target=/var/lib/apt,sharing=locked \
+ apt-get update && apt-get install -y gnupg2 wget xz-utils
RUN wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | apt-key add -
RUN echo deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-17 main | tee /etc/apt/sources.list.d/llvm.list
-# Manually install the kernel.org "Crosstool" based toolchains for gcc-13.2.0
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-aarch64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-arc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-i386-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-m68k-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-mips-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-microblaze-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-nios2-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-powerpc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-riscv64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-riscv32-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-sh2-linux.tar.xz | tar -C /opt -xJ
+# Create a list of URLs to process, then pass them into a 'while read' loop
+RUN if [ "$TARGETPLATFORM" = "linux/amd64" ]; then HOSTARCH=x86_64; else HOSTARCH=arm64; fi; ( \
+ # Manually install the kernel.org "Crosstool"-based toolchains
+ for arch in $ARCHS; do \
+ echo $MIRROR/$HOSTARCH/$TCVER/${HOSTARCH}-gcc-$TCVER-nolibc-${arch}-linux.tar.xz; \
+ done; \
+ \
+ # Deal with ARM, which has a 'gnueabi' suffix
+ echo $MIRROR/${HOSTARCH}/$TCVER/${HOSTARCH}-gcc-$TCVER-nolibc-arm-linux-gnueabi.tar.xz; \
+ \
+ ) | while read url; do \
+ # Read the URL and unpack it into /opt
+ wget -O - $url | tar -C /opt -xJ; \
+ done
# Manually install other toolchains
-RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz
+RUN if [ "$TARGETPLATFORM" = "linux/amd64" ]; then \
+ wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz; \
+ fi
# Update and install things from apt now
-RUN apt-get update && apt-get install -y \
+RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
+ --mount=type=cache,target=/var/lib/apt,sharing=locked \
+ apt-get update && apt-get install -y \
automake \
autopoint \
bc \
@@ -54,17 +79,15 @@
flex \
gawk \
gdisk \
+ gettext \
git \
gnu-efi \
gnutls-dev \
graphviz \
- grub-efi-amd64-bin \
- grub-efi-ia32-bin \
help2man \
iasl \
imagemagick \
iputils-ping \
- libc6-i386 \
libconfuse-dev \
libgit2-dev \
libjson-glib-dev \
@@ -82,7 +105,7 @@
libtool \
libudev-dev \
libusb-1.0-0-dev \
- linux-image-kvm \
+ linux-image-generic \
lzma-alone \
lzop \
mount \
@@ -118,8 +141,7 @@
vboot-utils \
xilinx-bootgen \
xxd \
- zip \
- && rm -rf /var/lib/apt/lists/*
+ zip
# Make kernels readable for libguestfs tools to work correctly
RUN chmod +r /boot/vmlinu*
@@ -127,11 +149,9 @@
# Build GRUB UEFI targets for ARM & RISC-V, 32-bit and 64-bit
RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
cd /tmp/grub && \
- git checkout grub-2.06 && \
+ git checkout grub-2.12 && \
git config --global user.name "GitLab CI Runner" && \
git config --global user.email trini@konsulko.com && \
- git cherry-pick 049efdd72eb7baa7b2bf8884391ee7fe650da5a0 && \
- git cherry-pick 403d6540cd608b2706cfa0cb4713f7e4b490ff45 && \
./bootstrap && \
mkdir -p /opt/grub && \
./configure --target=aarch64 --with-platform=efi \
@@ -141,7 +161,7 @@
TARGET_STRIP=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
TARGET_NM=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
- make && \
+ make -j$(nproc) && \
./grub-mkimage -O arm64-efi -o /opt/grub/grubaa64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
@@ -155,7 +175,7 @@
TARGET_STRIP=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
TARGET_NM=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
- make && \
+ make -j$(nproc) && \
./grub-mkimage -O arm-efi -o /opt/grub/grubarm.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
@@ -169,12 +189,34 @@
TARGET_STRIP=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
TARGET_NM=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
- make && \
+ make -j$(nproc) && \
./grub-mkimage -O riscv64-efi -o /opt/grub/grubriscv64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
search search_fs_file search_fs_uuid search_label serial sleep test \
true && \
+ make clean && \
+ ./configure --target=i386 --with-platform=efi \
+ CC=gcc \
+ TARGET_CC=/opt/gcc-13.2.0-nolibc/i386-linux/bin/i386-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-13.2.0-nolibc/i386-linux/bin/i386-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-13.2.0-nolibc/i386-linux/bin/i386-linux-strip \
+ TARGET_NM=/opt/gcc-13.2.0-nolibc/i386-linux/bin/i386-linux-nm \
+ TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/i386-linux/bin/i386-linux-ranlib && \
+ make -j$(nproc) && \
+ ./grub-mkimage -O i386-efi -o /opt/grub/grub_x86.efi --prefix= -d \
+ grub-core normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd && \
+ make clean && \
+ ./configure --target=x86_64 --with-platform=efi \
+ CC=gcc \
+ TARGET_CC=/opt/gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-strip \
+ TARGET_NM=/opt/gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-ranlib && \
+ make -j$(nproc) && \
+ ./grub-mkimage -O x86_64-efi -o /opt/grub/grub_x64.efi --prefix= -d \
+ grub-core normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd && \
rm -rf /tmp/grub
RUN git clone https://gitlab.com/qemu-project/qemu.git /tmp/qemu && \
@@ -195,7 +237,7 @@
cd /tmp/tf-a/ && \
git checkout v2.10.0 && \
cd tools/fiptool && \
- make && \
+ make -j$(nproc) && \
mkdir -p /usr/local/bin && \
cp fiptool /usr/local/bin && \
rm -rf /tmp/tf-a
@@ -280,9 +322,8 @@
RUN /bin/echo -e "kernelorg = /opt/gcc-13.2.0-nolibc/*" >> ~/.buildman
RUN /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2020.07/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman;
RUN /bin/echo -e "\n[toolchain-alias]\nsh = sh2" >> ~/.buildman
-RUN /bin/echo -e "\nsandbox = x86_64" >> ~/.buildman
RUN /bin/echo -e "\nx86 = i386" >> ~/.buildman;
# Add mkbootimg tool
RUN git clone https://android.googlesource.com/platform/system/tools/mkbootimg /home/uboot/mkbootimg
-ENV PYTHONPATH "${PYTHONPATH}:/home/uboot/mkbootimg"
+ENV PYTHONPATH="${PYTHONPATH}:/home/uboot/mkbootimg"
diff --git a/tools/imx8image.c b/tools/imx8image.c
index 7a06081..15510d3 100644
--- a/tools/imx8image.c
+++ b/tools/imx8image.c
@@ -734,7 +734,7 @@
fclose(fd);
if (header.tag != IVT_HEADER_TAG_B0) {
- fprintf(stderr, "header tag mismatched \n");
+ fprintf(stderr, "header tag mismatched file %s\n", img_sp->filename);
exit(EXIT_FAILURE);
} else {
file_off +=
diff --git a/tools/imx_cntr_image.sh b/tools/imx_cntr_image.sh
index 972b95c..07acd38 100755
--- a/tools/imx_cntr_image.sh
+++ b/tools/imx_cntr_image.sh
@@ -14,6 +14,10 @@
continue
fi
+ if [ $f = "spl/u-boot-spl.bin" ]; then
+ continue
+ fi
+
if [ -f $f ]; then
continue
fi