config SYS_FSL_DDR
	bool
	help
	  Select Freescale General DDR driver, shared between most Freescale
	  PowerPC- based SoCs (such as mpc83xx, mpc85xx and ARM- based
	  Layerscape SoCs (such as ls2080a).

config SYS_FSL_MMDC
	bool
	help
	  Select Freescale Multi Mode DDR controller (MMDC).

config SYS_FSL_DDR_EMU
	bool
	help
	  Specify emulator support for DDR. Some DDR features such as deskew
	  training are not available.

if SYS_FSL_DDR || SYS_FSL_MMDC

config SYS_FSL_DDR_BE
	bool
	help
		Access DDR registers in big-endian

config SYS_FSL_DDR_LE
	bool
	help
		Access DDR registers in little-endian

config FSL_DDR_BIST
	bool

config FSL_DDR_INTERACTIVE
	bool

config FSL_DDR_SYNC_REFRESH
	bool

config FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
	bool

menu "Freescale DDR controllers"
	depends on SYS_FSL_DDR

config SYS_NUM_DDR_CTLRS
	int "Maximum DDR controllers"
	default 3 if	ARCH_LS2080A	|| \
			ARCH_T4240
	default 2 if	ARCH_B4860	|| \
			ARCH_BSC9132	|| \
			ARCH_P4080	|| \
			ARCH_P5040	|| \
			ARCH_LX2160A	|| \
			ARCH_LX2162A
	default 1

config CHIP_SELECTS_PER_CTRL
	int "Number of chip selects per controller"
	default 4

config DIMM_SLOTS_PER_CTLR
	int "Number of DIMM slots per controller"
	default 1

config SYS_FSL_DDR_VER
	int
	default 50 if SYS_FSL_DDR_VER_50
	default 47 if SYS_FSL_DDR_VER_47
	default 46 if SYS_FSL_DDR_VER_46
	default 44 if SYS_FSL_DDR_VER_44

config SYS_FSL_DDR_VER_50
	bool

config SYS_FSL_DDR_VER_47
	bool

config SYS_FSL_DDR_VER_46
	bool

config SYS_FSL_DDR_VER_44
	bool

config SYS_FSL_DDRC_GEN1
	bool
	help
	  Enable Freescale DDR controller.

config SYS_FSL_DDRC_GEN2
	bool
	depends on !MPC86xx
	help
	  Enable Freescale DDR2 controller.

config SYS_FSL_DDRC_GEN3
	bool
	depends on PPC
	help
	  Enable Freescale DDR3 controller for PowerPC SoCs.

config SYS_FSL_DDRC_ARM_GEN3
	bool
	depends on ARM
	help
	  Enable Freescale DDR3 controller for ARM SoCs.

config SYS_FSL_DDRC_GEN4
	bool
	help
	  Enable Freescale DDR4 controller.

config SYS_FSL_HAS_DDR4
	bool

config SYS_FSL_HAS_DDR3
	bool

config SYS_FSL_HAS_DDR2
	bool

config SYS_FSL_HAS_DDR1
	bool

choice
	prompt "DDR technology"
	default SYS_FSL_DDR4 if SYS_FSL_HAS_DDR4
	default SYS_FSL_DDR3 if SYS_FSL_HAS_DDR3
	default SYS_FSL_DDR2 if SYS_FSL_HAS_DDR2
	default SYS_FSL_DDR1 if SYS_FSL_HAS_DDR1

config SYS_FSL_DDR4
	bool "Freescale DDR4 controller"
	depends on SYS_FSL_HAS_DDR4
	imply DDR_SPD
	select SYS_FSL_DDRC_GEN4

config SYS_FSL_DDR3
	bool "Freescale DDR3 controller"
	depends on SYS_FSL_HAS_DDR3
	imply DDR_SPD
	select SYS_FSL_DDRC_GEN3 if PPC
	select SYS_FSL_DDRC_ARM_GEN3 if ARM

config SYS_FSL_DDR2
	bool "Freescale DDR2 controller"
	depends on SYS_FSL_HAS_DDR2
	imply DDR_SPD
	select SYS_FSL_DDRC_GEN2 if (!MPC86xx && !SYS_FSL_DDRC_GEN3)

config SYS_FSL_DDR1
	bool "Freescale DDR1 controller"
	depends on SYS_FSL_HAS_DDR1
	imply DDR_SPD
	select SYS_FSL_DDRC_GEN1

endchoice

endmenu

config FSL_DMA
	def_bool y if DDR_ECC && MPC85xx && !ECC_INIT_VIA_DDRCONTROLLER

config DDR_ECC
	bool "ECC DDR memory support"

config DDR_ECC_CMD
	bool "Access the ECC features of the memory controller"
	depends on DDR_ECC && MPC83xx
	default y

config ECC_INIT_VIA_DDRCONTROLLER
	bool "DDR Memory controller initializes memory."
	help
	  Use the DDR controller to auto initialize memory.  If not enabled,
	  the DMA controller is responsible for doing this.

config SYS_DDR_RAW_TIMING
	bool "Get DDR timing information from something other than SPD"
	help
	  This is common with soldered DDR chips onboard without SPD. DDR raw
	  timing parameters are extracted from datasheet and hard-coded into
	  header files or board specific files.

endif

menu "PowerPC / M68K initial memory controller definitions (FLASH, SDRAM, etc)"
	depends on MCF52x2 || MPC8xx || MPC83xx || MPC85xx

config SYS_BR0_PRELIM_BOOL
	bool "Define Bank 0"

config SYS_BR0_PRELIM
	hex "Preliminary value for BR0"
	depends on SYS_BR0_PRELIM_BOOL

config SYS_OR0_PRELIM
	hex "Preliminary value for OR0"
	depends on SYS_BR0_PRELIM_BOOL

config SYS_BR1_PRELIM_BOOL
	bool "Define Bank 1"

config SYS_BR1_PRELIM
	hex "Preliminary value for BR1"
	depends on SYS_BR1_PRELIM_BOOL

config SYS_OR1_PRELIM
	hex "Preliminary value for OR1"
	depends on SYS_BR1_PRELIM_BOOL

config SYS_BR2_PRELIM_BOOL
	bool "Define Bank 2"

config SYS_BR2_PRELIM
	hex "Preliminary value for BR2"
	depends on SYS_BR2_PRELIM_BOOL

config SYS_OR2_PRELIM
	hex "Preliminary value for OR2"
	depends on SYS_BR2_PRELIM_BOOL

config SYS_BR3_PRELIM_BOOL
	bool "Define Bank 3"

config SYS_BR3_PRELIM
	hex "Preliminary value for BR3"
	depends on SYS_BR3_PRELIM_BOOL

config SYS_OR3_PRELIM
	hex "Preliminary value for OR3"
	depends on SYS_BR3_PRELIM_BOOL

config SYS_BR4_PRELIM_BOOL
	bool "Define Bank 4"

config SYS_BR4_PRELIM
	hex "Preliminary value for BR4"
	depends on SYS_BR4_PRELIM_BOOL

config SYS_OR4_PRELIM
	hex "Preliminary value for OR4"
	depends on SYS_BR4_PRELIM_BOOL

config SYS_BR5_PRELIM_BOOL
	bool "Define Bank 5"

config SYS_BR5_PRELIM
	hex "Preliminary value for BR5"
	depends on SYS_BR5_PRELIM_BOOL

config SYS_OR5_PRELIM
	hex "Preliminary value for OR5"
	depends on SYS_BR5_PRELIM_BOOL

config SYS_BR6_PRELIM_BOOL
	bool "Define Bank 6"

config SYS_BR6_PRELIM
	hex "Preliminary value for BR6"
	depends on SYS_BR6_PRELIM_BOOL

config SYS_OR6_PRELIM
	hex "Preliminary value for OR6"
	depends on SYS_BR6_PRELIM_BOOL

config SYS_BR7_PRELIM_BOOL
	bool "Define Bank 7"

config SYS_BR7_PRELIM
	hex "Preliminary value for BR7"
	depends on SYS_BR7_PRELIM_BOOL

config SYS_OR7_PRELIM
	hex "Preliminary value for OR7"
	depends on SYS_BR7_PRELIM_BOOL
endmenu

if TARGET_P1010RDB_PA || TARGET_P1010RDB_PB || TARGET_P1020RDB_PC || \
	TARGET_P1020RDB_PD || TARGET_P2020RDB

config COMMON_INIT_DDR
	bool "Do not have a TLB entry to cover common DDR init with serial presence detect (SPD)"

config SPL_COMMON_INIT_DDR
	bool "Do not have a TLB entry to cover common DDR init with SPD in SPL"

config TPL_COMMON_INIT_DDR
	bool "Do not have a TLB entry to cover common DDR init with SPD in TPL"

endif

config SYS_FSL_ERRATUM_A008378
	bool

config SYS_FSL_ERRATUM_A008109
	bool

config SYS_FSL_ERRATUM_A008511
	bool

config SYS_FSL_ERRATUM_A009663
	bool

config SYS_FSL_ERRATUM_A009801
	bool

config SYS_FSL_ERRATUM_A009803
	bool

config SYS_FSL_ERRATUM_A009942
	bool

config SYS_FSL_ERRATUM_A010165
	bool

config SYS_FSL_ERRATUM_NMG_DDR120
	bool

config SYS_FSL_ERRATUM_DDR_115
	bool

config SYS_FSL_ERRATUM_DDR111_DDR134
	bool

config SYS_FSL_ERRATUM_DDR_A003
	bool

config SYS_FSL_ERRATUM_DDR_A003474
	bool