powerpc/tool/pbl: fix pbl image compiling process
Previous process of compiling a PBL boot image is:
1: make <board_name_config>
2: make u-boot.pbl
for example:
make T4240QDS_SDCARD_config
make u-boot.pbl
Now the process is:
1: make <board_name>
for example:
make T4240QDS_SDCARD
Also, updated README.pblimage.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
diff --git a/doc/README.pblimage b/doc/README.pblimage
index 2b9bb5c..7fdd26b 100644
--- a/doc/README.pblimage
+++ b/doc/README.pblimage
@@ -14,20 +14,17 @@
1. Building PBL Boot Image.
The default Image is u-boot.pbl.
- For eSPI boot(available on P3041/P4080/P5020):
+ For eSPI boot(available on P2041/P3041/P4080/P5020/P5040/T4240):
To build the eSPI boot image:
- make <board_name>_SPIFLASH_config
- make u-boot.pbl
+ make <board_name>_SPIFLASH
- For SD boot(available on P3041/P4080/P5020):
+ For SD boot(available on P2041/P3041/P4080/P5020/P5040/T4240):
To build the SD boot image:
- make <board_name>_SDCARD_config
- make u-boot.pbl
+ make <board_name>_SDCARD
- For Nand boot(available on P3041/P5020):
+ For Nand boot(available on P2041/P3041/P5020/P5040):
To build the NAND boot image:
- make <board_name>_NAND_config
- make u-boot.pbl
+ make <board_name>_NAND
2. pblimage support available with mkimage utility will generate Freescale PBL