sandbox64: add a test case for UCLASS_NVMXIP
provide a test for NVM XIP devices
The test case allows to make sure of the following:
- The NVM XIP QSPI devices are probed
- The DT entries are read correctly
- the data read from the flash by the NVMXIP block driver is correct
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
diff --git a/test/dm/Makefile b/test/dm/Makefile
index e15bdbf..c8534b5 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (c) 2013 Google, Inc
+# Copyright 2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
obj-$(CONFIG_UT_DM) += test-dm.o
@@ -17,6 +18,10 @@
obj-$(CONFIG_UT_DM) += core.o
obj-$(CONFIG_UT_DM) += read.o
obj-$(CONFIG_UT_DM) += phys2bus.o
+ifeq ($(CONFIG_NVMXIP_QSPI)$(CONFIG_SANDBOX64),yy)
+obj-y += nvmxip.o
+endif
+
ifneq ($(CONFIG_SANDBOX),)
ifeq ($(CONFIG_ACPIGEN),y)
obj-y += acpi.o
diff --git a/test/dm/nvmxip.c b/test/dm/nvmxip.c
new file mode 100644
index 0000000..e934748
--- /dev/null
+++ b/test/dm/nvmxip.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functional tests for UCLASS_FFA class
+ *
+ * Copyright 2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
+ *
+ * Authors:
+ * Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
+ */
+
+#include <common.h>
+#include <blk.h>
+#include <console.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <dm/test.h>
+#include <linux/bitops.h>
+#include <test/test.h>
+#include <test/ut.h>
+#include "../../drivers/mtd/nvmxip/nvmxip.h"
+
+/* NVMXIP devices described in the device tree */
+#define SANDBOX_NVMXIP_DEVICES 2
+
+/* reference device tree data for the probed devices */
+static struct nvmxip_plat nvmqspi_refdata[SANDBOX_NVMXIP_DEVICES] = {
+ {0x08000000, 9, 4096}, {0x08200000, 9, 2048}
+};
+
+#define NVMXIP_BLK_START_PATTERN 0x1122334455667788ULL
+#define NVMXIP_BLK_END_PATTERN 0xa1a2a3a4a5a6a7a8ULL
+
+/**
+ * dm_nvmxip_flash_sanity() - check flash data
+ * @uts: test state
+ * @device_idx: the NVMXIP device index
+ * @buffer: the user buffer where the blocks data is copied to
+ *
+ * Mode 1: When buffer is NULL, initialize the flash with pattern data at the start
+ * and at the end of each block. This pattern data will be used to check data consistency
+ * when verifying the data read.
+ * Mode 2: When the user buffer is provided in the argument (not NULL), compare the data
+ * of the start and the end of each block in the user buffer with the expected pattern data.
+ * Return an error when the check fails.
+ *
+ * Return:
+ *
+ * 0 on success. Otherwise, failure
+ */
+static int dm_nvmxip_flash_sanity(struct unit_test_state *uts, u8 device_idx, void *buffer)
+{
+ int i;
+ u64 *ptr;
+ u8 *base;
+ unsigned long blksz;
+
+ blksz = BIT(nvmqspi_refdata[device_idx].lba_shift);
+
+ if (!buffer) {
+ /* Mode 1: point at the flash start address. Pattern data will be written */
+ base = map_sysmem(nvmqspi_refdata[device_idx].phys_base, 0);
+ } else {
+ /* Mode 2: point at the user buffer containing the data read and to be verified */
+ base = buffer;
+ }
+
+ for (i = 0; i < nvmqspi_refdata[device_idx].lba ; i++) {
+ ptr = (u64 *)(base + i * blksz);
+
+ /* write an 8 bytes pattern at the start of the current block */
+ if (!buffer)
+ *ptr = NVMXIP_BLK_START_PATTERN;
+ else
+ ut_asserteq_64(NVMXIP_BLK_START_PATTERN, *ptr);
+
+ ptr = (u64 *)((u8 *)ptr + blksz - sizeof(u64));
+
+ /* write an 8 bytes pattern at the end of the current block */
+ if (!buffer)
+ *ptr = NVMXIP_BLK_END_PATTERN;
+ else
+ ut_asserteq_64(NVMXIP_BLK_END_PATTERN, *ptr);
+ }
+
+ if (!buffer)
+ unmap_sysmem(base);
+
+ return 0;
+}
+
+/**
+ * dm_test_nvmxip() - check flash data
+ * @uts: test state
+ * Return:
+ *
+ * CMD_RET_SUCCESS on success. Otherwise, failure
+ */
+static int dm_test_nvmxip(struct unit_test_state *uts)
+{
+ struct nvmxip_plat *plat_data = NULL;
+ struct udevice *dev = NULL, *bdev = NULL;
+ u8 device_idx;
+ void *buffer = NULL;
+ unsigned long flashsz;
+
+ /* set the flash content first for both devices */
+ dm_nvmxip_flash_sanity(uts, 0, NULL);
+ dm_nvmxip_flash_sanity(uts, 1, NULL);
+
+ /* probing all NVM XIP QSPI devices */
+ for (device_idx = 0, uclass_first_device(UCLASS_NVMXIP, &dev);
+ dev;
+ uclass_next_device(&dev), device_idx++) {
+ plat_data = dev_get_plat(dev);
+
+ /* device tree entries checks */
+ ut_assertok(nvmqspi_refdata[device_idx].phys_base != plat_data->phys_base);
+ ut_assertok(nvmqspi_refdata[device_idx].lba_shift != plat_data->lba_shift);
+ ut_assertok(nvmqspi_refdata[device_idx].lba != plat_data->lba);
+
+ /* before reading all the flash blocks, let's calculate the flash size */
+ flashsz = plat_data->lba << plat_data->lba_shift;
+
+ /* allocate the user buffer where to copy the blocks data to */
+ buffer = calloc(flashsz, 1);
+ ut_assertok(!buffer);
+
+ /* the block device is the child of the parent device probed with DT */
+ ut_assertok(device_find_first_child(dev, &bdev));
+
+ /* reading all the flash blocks */
+ ut_asserteq(plat_data->lba, blk_read(bdev, 0, plat_data->lba, buffer));
+
+ /* compare the data read from flash with the expected data */
+ dm_nvmxip_flash_sanity(uts, device_idx, buffer);
+
+ free(buffer);
+ }
+
+ ut_assertok(device_idx != SANDBOX_NVMXIP_DEVICES);
+
+ return CMD_RET_SUCCESS;
+}
+
+DM_TEST(dm_test_nvmxip, UT_TESTF_SCAN_FDT | UT_TESTF_CONSOLE_REC);