dm: sound: max98095: Split out interface setup code
With driver model we want to do a minimal probe when the device is probed
and then set up the codec interface later when a sound is actully played.
Split this setup code out into its own function to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
index 6edf373..51556c0 100644
--- a/drivers/sound/max98095.c
+++ b/drivers/sound/max98095.c
@@ -384,12 +384,14 @@
*
* @returns -1 for error and 0 Success.
*/
-static int max98095_device_init(struct max98095_priv *priv,
- enum en_max_audio_interface aif_id)
+static int max98095_device_init(struct max98095_priv *priv)
{
unsigned char id;
int error = 0;
+ /* Enable codec clock */
+ set_xclkout();
+
/* reset the codec, the DSP core, and disable all interrupts */
error = max98095_reset(priv);
if (error != 0) {
@@ -406,11 +408,19 @@
if (error < 0) {
debug("%s: Failure reading hardware revision: %d\n",
__func__, id);
- goto err_access;
+ return error;
}
debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+ return 0;
+}
+
+static int max98095_setup_interface(struct max98095_priv *priv,
+ enum en_max_audio_interface aif_id)
+{
+ int error;
+
- error |= max98095_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
+ error = max98095_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
/*
* initialize registers to hardware default configuring audio
@@ -463,7 +473,6 @@
else
error |= max98095_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07);
-err_access:
if (error < 0)
return -1;
@@ -477,13 +486,7 @@
{
int ret = 0;
- /* Enable codec clock */
- set_xclkout();
-
- /* shift the device address by 1 for 7 bit addressing */
- g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
-
- ret = max98095_device_init(&g_max98095_info, aif_id);
+ ret = max98095_setup_interface(&g_max98095_info, aif_id);
if (ret < 0) {
debug("%s: max98095 codec chip init failed\n", __func__);
return ret;
@@ -569,6 +572,15 @@
}
i2c_set_bus_num(pcodec_info->i2c_bus);
+
+ /* shift the device address by 1 for 7 bit addressing */
+ g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+ ret = max98095_device_init(&g_max98095_info);
+ if (ret < 0) {
+ debug("%s: max98095 codec chip init failed\n", __func__);
+ return ret;
+ }
+
ret = max98095_do_init(pcodec_info, aif_id, sampling_rate, mclk_freq,
bits_per_sample);
i2c_set_bus_num(old_bus);