bcm68360: add initial support
This add the initial support of the broadcom bcm68360 SoC family.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 78cc79a..94a649f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -633,6 +633,12 @@
select OF_CONTROL
imply CMD_DM
+config ARCH_BCM68360
+ bool "Broadcom BCM68360 family"
+ select DM
+ select OF_CONTROL
+ imply CMD_DM
+
config ARCH_BCM6858
bool "Broadcom BCM6858 family"
select DM
diff --git a/arch/arm/dts/bcm68360.dtsi b/arch/arm/dts/bcm68360.dtsi
new file mode 100644
index 0000000..7bbe207
--- /dev/null
+++ b/arch/arm/dts/bcm68360.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include "skeleton64.dtsi"
+
+/ {
+ compatible = "brcm,bcm68360";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ spi0 = &hsspi;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&l2>;
+ u-boot,dm-pre-reloc;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&l2>;
+ u-boot,dm-pre-reloc;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_osc>;
+ clock-mult = <2>;
+ clock-div = <1>;
+ };
+
+ refclk50mhz: refclk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ u-boot,dm-pre-reloc;
+
+ wdt1: watchdog@ff800480 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x0 0xff800480 0x0 0x14>;
+ clocks = <&refclk50mhz>;
+ };
+
+ wdt2: watchdog@ff8004c0 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x0 0xff8004c0 0x0 0x14>;
+ clocks = <&refclk50mhz>;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdt1>;
+ };
+
+ uart0: serial@ff800640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x0 0xff800640 0x0 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ leds: led-controller@ff800800 {
+ compatible = "brcm,bcm6858-leds";
+ reg = <0x0 0xff800800 0x0 0xe4>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller@0xff800500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800500 0x0 0x4>,
+ <0x0 0xff800520 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio1: gpio-controller@0xff800504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800504 0x0 0x4>,
+ <0x0 0xff800524 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio2: gpio-controller@0xff800508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800508 0x0 0x4>,
+ <0x0 0xff800528 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio3: gpio-controller@0xff80050c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff80050c 0x0 0x4>,
+ <0x0 0xff80052c 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio4: gpio-controller@0xff800510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800510 0x0 0x4>,
+ <0x0 0xff800530 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio5: gpio-controller@0xff800514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800514 0x0 0x4>,
+ <0x0 0xff800534 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio6: gpio-controller@0xff800518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff800518 0x0 0x4>,
+ <0x0 0xff800538 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ gpio7: gpio-controller@0xff80051c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x0 0xff80051c 0x0 0x4>,
+ <0x0 0xff80053c 0x0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ hsspi: spi-controller@ff801000 {
+ compatible = "brcm,bcm6328-hsspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0xff801000 0x0 0x600>;
+ clocks = <&hsspi_pll>, <&hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ spi-max-frequency = <100000000>;
+ num-cs = <8>;
+
+ status = "disabled";
+ };
+
+ nand: nand-controller@ff801800 {
+ compatible = "brcm,nand-bcm68360",
+ "brcm,brcmnand-v5.0",
+ "brcm,brcmnand";
+ reg-names = "nand", "nand-int-base", "nand-cache";
+ reg = <0x0 0xff801800 0x0 0x180>,
+ <0x0 0xff802000 0x0 0x10>,
+ <0x0 0xff801c00 0x0 0x200>;
+ parameter-page-big-endian = <0>;
+
+ status = "disabled";
+ };
+ };
+};