integrator: update the Integrator/CP config
The Integrator/CP config file was very outdated and gives a
non functional U-Boot. So:
- Set the CONFIG_ARCH_CINTEGRATOR arch flag correctly
- Add proper core module configuration options
- Skip cluttered command lista and just include
<config_cmd_default.h>
- Kill off #if 0 network section and insert some example
configuration that simply just boots from the network
using TFTP if available.
- Delete flash control registers that have no business
in this config file. These are already moved down to
board/armltd/integrator/integrator-sc.h
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index ccbdf44..57610a6 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,8 +31,13 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/* Integrator-specific configuration */
#define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_INTEGRATOR
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
/*
* High Level Configuration Options
* (easy to change)
@@ -47,6 +52,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
+
/*
* Size of malloc() pool
*/
@@ -85,32 +91,14 @@
/*
* Command line configuration.
*/
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
+#include <config_cmd_default.h>
-
-#if 0
#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
-
-Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
-
-*/
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
/*
* Miscellaneous configurable options
@@ -201,15 +189,6 @@
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CONFIG_ENV_SIZE 8192 /* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE 0xCB000000 /* CP Registers*/
-#define OS_FLASHPROG 0x00000004 /* Flash register*/
-#define CPMASK_EXTRABANK 0x8
-#define CPMASK_FLASHSIZE 0x4
-#define CPMASK_FLWREN 0x2
-#define CPMASK_FLVPPEN 0x1
/*
* The ARM boot monitor initializes the board.