Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 753d85b..02a095e 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -155,7 +155,7 @@
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
- "vcimage - loads an image to Display\n",
+ "loads an image to Display",
"vcimage addr\n"
);
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 949af18..6b955d8 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -122,7 +122,7 @@
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD(
boota, 3, 1, do_boota,
- "boota - boot an Amiga kernel\n",
+ "boot an Amiga kernel",
"address disk"
);
#endif /* _CMD_BOOTA_H */
diff --git a/board/MAI/menu/cmd_menu.c b/board/MAI/menu/cmd_menu.c
index 079f1ff..2b97d23 100644
--- a/board/MAI/menu/cmd_menu.c
+++ b/board/MAI/menu/cmd_menu.c
@@ -10,7 +10,7 @@
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD(
menu, 1, 1, do_menu,
- "menu - display BIOS setup menu\n",
+ "display BIOS setup menu",
""
);
#endif
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 11e2be7..4f7dda0 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -101,7 +101,7 @@
U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
- "diufb - Init or Display BMP file\n",
+ "Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index 9fc03f1..d47cf1a 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -96,6 +96,6 @@
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
);
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 35284d1..30046fe 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -190,6 +190,6 @@
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index d362655..2c2849b 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -213,6 +213,6 @@
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
- "bootstrap - program the serial device strap\n",
+ "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 3b49e5b..6b38493 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -237,7 +237,7 @@
U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
- "pllalter- change pll frequence \n",
+ "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
----------------------------------------------\n\
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index e1357f4..d2a3b9e 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -329,7 +329,7 @@
U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
- "l2cache - enable or disable L2 cache\n",
+ "enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache\n"
);
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 3b49e5b..6b38493 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -237,7 +237,7 @@
U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
- "pllalter- change pll frequence \n",
+ "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
----------------------------------------------\n\
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index c840748..6dfd8ba 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -226,6 +226,6 @@
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
index 7cc094a..6b68f33 100644
--- a/board/amcc/taihu/lcd.c
+++ b/board/amcc/taihu/lcd.c
@@ -232,25 +232,25 @@
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
- "lcd_cls - lcd clear display\n",
+ "lcd clear display",
NULL
);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
- "lcd_puts - display string on lcd\n",
+ "display string on lcd",
"<string> - <string> to be displayed\n"
);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
- "lcd_putc - display char on lcd\n",
+ "display char on lcd",
"<char> - <char> to be displayed\n"
);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
- "lcd_cur - shift cursor on lcd\n",
+ "shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
" <dir> - 0=backward 1=forward\n"
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index a98c186..5224378 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -93,7 +93,7 @@
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
- "sw2_stat - show status of switch 2\n",
+ "show status of switch 2",
NULL
);
@@ -132,7 +132,7 @@
U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
- "led_ctl - make led 1 or 2 on or off\n",
+ "make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2\t"
);
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 52bad56..8e96905 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -127,6 +127,6 @@
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
- "update_boot_eeprom - update boot eeprom content\n",
+ "update boot eeprom content",
NULL
);
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index 4e14bbc..e4d0705 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -254,16 +254,16 @@
return 0;
}
-U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL);
-U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL);
+U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
+U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
- "lcd_puts - display string on lcd\n",
+ "display string on lcd",
"<string> - <string> to be displayed\n");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
- "lcd_putc - display char on lcd\n",
+ "display char on lcd",
"<char> - <char> to be displayed\n");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
- "lcd_cur - shift cursor on lcd\n",
+ "shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
@@ -373,8 +373,8 @@
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
- "ledon - led test light on\n", NULL);
+ "led test light on", NULL);
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
- "ledoff - led test light off\n", NULL);
+ "led test light off", NULL);
#endif
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index 5b8b88e..b471c95 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -168,7 +168,7 @@
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
- "xbriinfo - Show PCIX bridge info\n", NULL);
+ "Show PCIX bridge info", NULL);
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
@@ -222,7 +222,7 @@
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
- "xdevinfo - Show PCIX Device info\n", NULL);
+ "Show PCIX Device info", NULL);
extern void show_reset_reg(void);
@@ -233,4 +233,4 @@
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
- "resetinfo - Show Reset REG info\n", NULL);
+ "Show Reset REG info", NULL);
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index 96b918b..63f8744 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -74,5 +74,5 @@
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update_boot_eeprom - update bootstrap eeprom content\n", NULL);
+ "update bootstrap eeprom content", NULL);
#endif
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index 5198317..d2ca257 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -281,6 +281,6 @@
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
- "evb440spe - program the serial device strap\n",
+ "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index e9f80ff..fcf2698 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -659,7 +659,7 @@
}
U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
- "temp - interact with the temperature sensor\n",
+ "interact with the temperature sensor",
"temp [s]\n"
" - Show status.\n"
"temp l LOW [HIGH] [THERM]\n"
@@ -674,28 +674,28 @@
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
- "loadace - load fpga configuration from System ACE compact flash\n",
+ "load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
"loadace\n" " - loads default configuration\n");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
- "swconfig- display or modify the software configuration byte\n",
+ "display or modify the software configuration byte",
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
"swconfig\n" " - display software configuration byte\n");
U_BOOT_CMD (pause, 2, 0, do_pause,
- "pause - sleep processor until any key is pressed with poll time of N seconds\n",
+ "sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
" - sleep processor until any key is pressed with poll time of 1 second\n");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
- "swrecon - trigger a board reconfigure to the software selected configuration\n",
+ "trigger a board reconfigure to the software selected configuration",
"\n"
" - trigger a board reconfigure to the software selected configuration\n");
diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index f048155..f727061 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -478,7 +478,7 @@
}
U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
- "eeprom - read/write/copy to/from the PowerSpan II eeprom\n",
+ "read/write/copy to/from the PowerSpan II eeprom",
"eeprom r OFF [NUM]\n"
" - read NUM words starting at OFF\n"
"eeprom w OFF VAL\n"
diff --git a/board/barco/barco.c b/board/barco/barco.c
index e3abca4..a19e1ed 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -306,19 +306,19 @@
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
- " try_working - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
- " boot_working - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
- " boot_default - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
/*
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index ae5061f..aa46e58 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -194,7 +194,7 @@
}
U_BOOT_CMD (dip, 1, 1, cmd_dip,
- "dip - read dip switch and config inputs\n",
+ "read dip switch and config inputs",
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
@@ -228,7 +228,7 @@
}
U_BOOT_CMD (buz, 2, 1, cmd_buz,
- "buz - turns buzzer on/off\n",
+ "turns buzzer on/off",
"\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
#endif /* CONFIG_BC3450_BUZZER */
@@ -322,7 +322,7 @@
}
U_BOOT_CMD (fp, 3, 1, cmd_fp,
- "fp - front panes access functions\n",
+ "front panes access functions",
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
@@ -523,7 +523,7 @@
}
U_BOOT_CMD (temp, 3, 1, cmd_temp,
- "temp - print current temperature\n",
+ "print current temperature",
"\n" "temp\n" " - print current temperature\n");
#ifdef CONFIG_BC3450_CAN
@@ -816,7 +816,7 @@
return 1;
}
-U_BOOT_CMD (test, 2, 1, cmd_test, "test - unit test routines\n", "\n"
+U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c
index fa650f2..e77bb0c 100644
--- a/board/bf537-stamp/cmd_bf537led.c
+++ b/board/bf537-stamp/cmd_bf537led.c
@@ -196,6 +196,6 @@
/* Register information for u-boot to find this command */
U_BOOT_CMD(led, 3, 1, do_bf537led,
- "led- Control BF537 stamp LEDs\n", USAGE_LONG);
+ "Control BF537 stamp LEDs", USAGE_LONG);
#endif
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 00f0671..52f031c 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -435,7 +435,7 @@
U_BOOT_CMD(
fkt, 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"i2c\n"
" - Test I2C communication\n"
"fkt led\n"
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 878416f..73e6c3e 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -259,7 +259,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 3abcfe6..c4b4b67 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -247,7 +247,7 @@
}
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
- "digtest - Test digital in-/output\n",
+ "Test digital in-/output",
NULL
);
@@ -341,7 +341,7 @@
}
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
- "anatest - Test analog in-/output\n",
+ "Test analog in-/output",
NULL
);
@@ -408,7 +408,7 @@
}
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
- "inctest - Test incremental encoder inputs\n",
+ "Test incremental encoder inputs",
NULL
);
#endif
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 5709d45..d0ee193 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -198,7 +198,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 633f641..4ea373a 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -550,7 +550,7 @@
}
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
- "autoupd - Automatically update images\n",
+ "Automatically update images",
NULL
);
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index ad490c3..0a6626e 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -123,7 +123,7 @@
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
- "loadpci - Wait for pci bootcmd and boot it\n",
+ "Wait for pci bootcmd and boot it",
NULL
);
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 1db8d90..066df74 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -372,6 +372,6 @@
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
- "esdbmp - display BMP image\n",
+ "display BMP image",
"<imageAddr> - display image\n"
);
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
index 318f229..9b2cf90 100644
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
@@ -1859,6 +1859,6 @@
}
U_BOOT_CMD(
cpld, 1, 1, do_cpld,
- "cpld - Program onboard CPLD\n",
+ "Program onboard CPLD",
NULL
);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index dcab906..517b174 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -176,7 +176,7 @@
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index bd569a6..0aca825 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -689,7 +689,7 @@
}
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
- "onewire - Read 1-write ID\n",
+ "Read 1-write ID",
NULL
);
@@ -750,7 +750,7 @@
}
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
- "getbpip - Update IP-Address with Backplane IP-Address\n",
+ "Update IP-Address with Backplane IP-Address",
NULL
);
@@ -786,7 +786,7 @@
}
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
- "setbpip - Write Backplane IP-Address\n",
+ "Write Backplane IP-Address",
NULL
);
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6eedb83..b6b50fb 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -294,5 +294,5 @@
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "writepci- Write some data to pcibus\n",
+ "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 70bae60..4826633 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -993,6 +993,6 @@
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
- "show_config - Show Marvell strapping register\n",
+ "Show Marvell strapping register",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 97a39c9..f405be9 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -227,7 +227,7 @@
U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
- "pci9054 - PLX PCI9054 EEPROM access\n",
+ "PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
"pci9054 update - updates EEPROM with default values\n"
);
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 2f97a12..f9b91b5 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -606,7 +606,7 @@
}
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
- "dcf77 - Check DCF77 receiver\n",
+ "Check DCF77 receiver",
NULL
);
@@ -656,7 +656,7 @@
}
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
- "hubinit - Initialize USB hub\n",
+ "Initialize USB hub",
NULL
);
#endif /* CONFIG_I2C_MULTI_BUS */
@@ -789,7 +789,7 @@
}
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
- "sbe - setup boot eeprom\n",
+ "setup boot eeprom",
NULL
);
@@ -863,7 +863,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
@@ -914,7 +914,7 @@
}
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
- "wpi - Wait for power change interrupt\n",
+ "Wait for power change interrupt",
NULL
);
@@ -959,7 +959,7 @@
}
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
- "dviinit - Initialize DVI Panellink transmitter\n",
+ "Initialize DVI Panellink transmitter",
NULL
);
@@ -999,7 +999,7 @@
}
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
- "time - run command and output execution time\n",
+ "run command and output execution time",
NULL
);
@@ -1049,6 +1049,6 @@
}
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
- "gfxdemo - demo\n",
+ "demo",
NULL
);
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index efadf16..ae3bc80 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -733,7 +733,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index f83dfe8..db2c548 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -54,7 +54,7 @@
}
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
- "setdevice - Set device number on pci adapter boards\n",
+ "Set device number on pci adapter boards",
NULL
);
@@ -77,7 +77,7 @@
}
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
- "getdevice - Get device number and set slot env variable\n",
+ "Get device number and set slot env variable",
NULL
);
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index f558a2b..a0d1f3f 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -108,7 +108,7 @@
}
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
- "loadpci - Wait for pci-image and boot it\n",
+ "Wait for pci-image and boot it",
NULL
);
#endif
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 42774ad..0602abf 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -375,7 +375,7 @@
U_BOOT_CMD(
wpeeprom, 2, 1, do_wpeeprom,
- "wpeeprom - Check/Enable/Disable I2C EEPROM write protection\n",
+ "Check/Enable/Disable I2C EEPROM write protection",
"wpeeprom\n"
" - check I2C EEPROM write protection state\n"
"wpeeprom 1\n"
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index f7962af..f225f0e 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -294,7 +294,7 @@
return (0);
}
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL);
+U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
int phypower(int flag)
{
@@ -338,7 +338,7 @@
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
- "phypower- Switch power of ethernet phy\n", NULL);
+ "Switch power of ethernet phy", NULL);
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -369,5 +369,5 @@
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "writepci- Write some data to pcibus\n",
+ "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 85057a2..7c0aaa2 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -333,6 +333,6 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index c0781dc..975b6d6 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -203,6 +203,6 @@
}
U_BOOT_CMD(
cantest, 3, 1, do_cantest,
- "cantest - Test CAN controller",
+ "Test CAN controller",
NULL
);
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 16c9c7e..7808d4d 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -98,7 +98,7 @@
}
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
- "waithci - Wait for host control interrupt\n",
+ "Wait for host control interrupt",
NULL
);
@@ -258,7 +258,7 @@
}
U_BOOT_CMD(
fifo, 5, 1, do_fifo,
- "fifo - Fifo module operations\n",
+ "Fifo module operations",
"wait\nfifo read\n"
"fifo write fifo(0..3) data [cnt=1]\n"
"fifo write address(>=4) data [cnt=1]\n"
@@ -336,7 +336,7 @@
}
U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
- "sbe - setup bootstrap eeprom\n",
+ "setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
@@ -399,7 +399,7 @@
}
U_BOOT_CMD(
painit, 1, 1, do_painit,
- "painit - prepare PciAccess system\n",
+ "prepare PciAccess system",
NULL
);
#endif /* CONFIG_PRAM */
@@ -411,7 +411,7 @@
}
U_BOOT_CMD(
selfreset, 1, 1, do_selfreset,
- "selfreset- assert self-reset# signal\n",
+ "assert self-reset# signal",
NULL
);
@@ -448,7 +448,7 @@
}
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
- "resetout - assert PMC-RESETOUT# signal\n",
+ "assert PMC-RESETOUT# signal",
NULL
);
@@ -480,7 +480,7 @@
}
U_BOOT_CMD(
inta, 2, 1, do_inta,
- "inta - Assert/Deassert or query INTA# state in non-monarch mode\n",
+ "Assert/Deassert or query INTA# state in non-monarch mode",
NULL
);
@@ -513,7 +513,7 @@
}
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
- "pmm - Setup pmm[1] registers\n",
+ "Setup pmm[1] registers",
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
@@ -549,7 +549,7 @@
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 64e6d63..80ff237 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -248,7 +248,7 @@
}
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
- "iploop - iprobe loop <addr>\n",
+ "iprobe loop <addr>",
NULL
);
@@ -301,7 +301,7 @@
}
U_BOOT_CMD(
codec, 1, 1, do_codec,
- "codec - Enable codec\n",
+ "Enable codec",
NULL
);
@@ -334,7 +334,7 @@
}
U_BOOT_CMD(
saa, 5, 1, do_saa,
- "saa - Write to SAA1064 <addr> <instr> <cntrl> <data>\n",
+ "Write to SAA1064 <addr> <instr> <cntrl> <data>",
NULL
);
@@ -373,7 +373,7 @@
}
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
- "iwrite - Write n bytes to I2C-device\n",
+ "Write n bytes to I2C-device",
"addr cnt data0 ... datan\n"
);
@@ -405,7 +405,7 @@
}
U_BOOT_CMD(
iread, 3, 1, do_iread,
- "iread - Read from I2C <addr> <cnt>\n",
+ "Read from I2C <addr> <cnt>",
NULL
);
@@ -443,7 +443,7 @@
}
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
- "ireadl - Read-loop from I2C <addr>\n",
+ "Read-loop from I2C <addr>",
NULL
);
#endif
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index ec65ffd..5480105 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -392,6 +392,6 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
index 1d03570..aef9c27 100644
--- a/board/evb64260/zuma_pbb.c
+++ b/board/evb64260/zuma_pbb.c
@@ -202,19 +202,19 @@
U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb,
- "zinit - init zuma pbb\n",
+ "init zuma pbb",
"\n"
" - init zuma pbb\n"
);
U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma,
- "zdtest - run dma test\n",
+ "run dma test",
"[cmd [count]]\n"
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
);
U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox,
- "zminit - init zuma mbox\n",
+ "init zuma mbox",
"\n"
" - init zuma mbox\n"
);
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 96820ac..eb76d93 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -280,7 +280,7 @@
U_BOOT_CMD(
diswd, 1, 0, pixis_disable_watchdog_cmd,
- "diswd - Disable watchdog timer \n",
+ "Disable watchdog timer",
NULL);
#ifdef CONFIG_PIXIS_SGMII_CMD
@@ -539,7 +539,7 @@
U_BOOT_CMD(
pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "pixis_reset - Reset the board using the FPGA sequencer\n",
+ "Reset the board using the FPGA sequencer",
" pixis_reset\n"
" pixis_reset [altbank]\n"
" pixis_reset altbank wd\n"
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 2320c0f..2b2d5d7 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -138,7 +138,7 @@
U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
- "diufb - Init or Display BMP file\n",
+ "Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index 48fc643..b35038d 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -185,7 +185,7 @@
}
U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc,
- "dumpebc - Dump all EBC registers\n",
+ "Dump all EBC registers",
NULL
);
@@ -207,7 +207,7 @@
}
U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr,
- "dumpdcr - Dump all DCR registers\n",
+ "Dump all DCR registers",
NULL
);
@@ -271,7 +271,7 @@
}
U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr,
- "dumpspr - Dump all SPR registers\n",
+ "Dump all SPR registers",
NULL
);
#endif
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 54b3b86..092d368 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -277,7 +277,7 @@
}
U_BOOT_CMD(
fpga, 6, 1, do_fpga,
- "fpga - FPGA sub-system\n",
+ "FPGA sub-system",
"load [type] addr size\n"
" - write the configuration data at memory address `addr',\n"
" size `size' bytes, into the FPGA of type `type' (either\n"
@@ -336,7 +336,7 @@
}
U_BOOT_CMD(
eeclear, 1, 0, do_eecl,
- "eeclear - Clear the eeprom on a Hymod board \n",
+ "Clear the eeprom on a Hymod board",
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
index 141371b..5797880 100644
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -590,7 +590,7 @@
}
U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest,
- "stest - simple send test for hdlc_enet\n",
+ "simple send test for hdlc_enet",
"no arguments\n"
);
/* simple receive test routine */
@@ -612,7 +612,7 @@
}
U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest,
- "rtest - simple receive test for hdlc_enet\n",
+ "simple receive test for hdlc_enet",
"no arguments\n"
);
#endif
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 257f1cd..1b665a9 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -851,7 +851,7 @@
}
U_BOOT_CMD(
pic, 4, 1, do_pic,
- "pic - read and write PIC registers\n",
+ "read and write PIC registers",
"read reg - read PIC register `reg'\n"
"pic write reg val - write value `val' to PIC register `reg'\n"
);
@@ -910,7 +910,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
@@ -982,7 +982,7 @@
U_BOOT_CMD(
lsb, 2, 1, do_lsb,
- "lsb - check and set LSB switch\n",
+ "check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
"lsb - print current setting\n"
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index 0a8787a..bafd39c 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -432,7 +432,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index adecad0..4c04b98 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -486,7 +486,7 @@
U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp,
- "eepromwp- eeprom write protect off/on\n",
+ "eeprom write protect off/on",
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
);
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
index 6ad95b5..dc13804 100644
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -55,7 +55,7 @@
}
U_BOOT_CMD(
mip405, 8, 1, do_mip405,
- "mip405 - MIP405 specific Cmds\n",
+ "MIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n"
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 9d9531b..95bfdcc 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -427,7 +427,7 @@
U_BOOT_CMD(
pati, 8, 1, do_pati,
- "pati - PATI specific Cmds\n",
+ "PATI specific Cmds",
"info - displays board information\n"
"pati pci - displays PCI registers\n"
"pati led <nr> <on> \n"
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
index 945e5c9..ad5e0a1 100644
--- a/board/mpl/pip405/cmd_pip405.c
+++ b/board/mpl/pip405/cmd_pip405.c
@@ -60,7 +60,7 @@
}
U_BOOT_CMD(
pip405, 6, 1, do_pip405,
- "pip405 - PIP405 specific Cmds\n",
+ "PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
"pip405 flash mps - updates U-Boot with image from MPS\n"
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index d3629c5..2748fa9 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -175,6 +175,6 @@
U_BOOT_CMD(
vcma9, 6, 1, do_vcma9,
- "vcma9 - VCMA9 specific commands\n",
+ "VCMA9 specific commands",
"flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
);
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index c706ca5..80c2cb5 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -236,7 +236,7 @@
U_BOOT_CMD(
wd, 2, 1, do_wd,
- "wd - check and set watchdog\n",
+ "check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 01ceece..5fd3291 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -761,7 +761,7 @@
U_BOOT_CMD(
led, 2, 1, do_led,
- "led - set the DIAG-LED\n",
+ "set the DIAG-LED",
"[bitmask] 0x01 = DIAG 1 on\n"
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
@@ -823,7 +823,7 @@
U_BOOT_CMD(
sha1, 4, 1, do_sha1,
- "sha1 - calculate the SHA1 Sum\n",
+ "calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
" -c check the U-Boot image in flash\n"
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index bb98fcf..10d0df6 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -53,7 +53,7 @@
}
U_BOOT_CMD(
led , 3, 1, do_led,
- "led - set LED 0..11 on the PN62 board\n",
+ "set LED 0..11 on the PN62 board",
"i fun\n"
" - set 'i'th LED to function 'fun'\n"
);
@@ -174,7 +174,7 @@
U_BOOT_CMD(
loadpci, 2, 1, do_loadpci,
- "loadpci - load binary file over PCI\n",
+ "load binary file over PCI",
"[addr]\n"
" - load binary file over PCI to address 'addr'\n"
);
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 9b87f6a..8777284 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -227,7 +227,7 @@
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
- "fpga - boot FPGA\n",
+ "boot FPGA",
"address size\n - boot FPGA with gzipped image at <address>\n"
);
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index b0aa8dd..aa598aa 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -128,7 +128,7 @@
}
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
- "idpcmd - custom IDP command\n",
+ "custom IDP command",
"no args at this time\n"
);
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index b502e4d..1871984 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -414,6 +414,6 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index 8b04453..6d0bbc0 100644
--- a/board/renesas/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -323,7 +323,7 @@
U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
- "setmac - write MAC address for RTL8110SCL\n",
+ "write MAC address for RTL8110SCL",
"\n"
"setmac <mac address> - write MAC address for RTL8110SCL\n"
);
@@ -342,7 +342,7 @@
U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
- "printmac - print MAC address for RTL8110\n",
+ "print MAC address for RTL8110",
"\n"
" - print MAC address for RTL8110\n"
);
diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 22079fb..6dbb784 100644
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -159,7 +159,7 @@
U_BOOT_CMD(
hwtest, 2, 1, do_hw_test,
- "hwtest - hardware test for R0P7785LC0011RL board\n",
+ "hardware test for R0P7785LC0011RL board",
"\n"
"hwtest all - test all hardware\n"
"hwtest pld - output PLD version\n"
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index 9af6b8d..c1af70c 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -500,7 +500,7 @@
U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe,
- "iprobe1 - probe to discover valid I2C chip addresses\n",
+ "probe to discover valid I2C chip addresses",
"\n -discover valid I2C chip addresses\n"
);
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index 8d97a9c..9b94af5 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -578,7 +578,7 @@
}
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "kasetup - Set environment to factory defaults\n", NULL);
+ "Set environment to factory defaults", NULL);
U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "karecover - Set environment to allow for fs recovery\n", NULL);
+ "Set environment to allow for fs recovery", NULL);
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index 19302dc..ec4c451 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -544,7 +544,7 @@
}
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
- "mbsetup - Set environment to factory defaults\n", NULL);
+ "Set environment to factory defaults", NULL);
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
- "mbrecover - Set environment to allow for fs recovery\n", NULL);
+ "Set environment to allow for fs recovery", NULL);
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index 63aa179..c9a93e1 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -292,7 +292,7 @@
U_BOOT_CMD(
fpga, 4, 1, do_fpga,
- "fpga - access FPGA(s)\n",
+ "access FPGA(s)",
"fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n"
"fpga load [name] addr - load FPGA configuration data\n"
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 25cf2bb..f87d6bc 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -404,7 +404,7 @@
}
U_BOOT_CMD (puma, 4, 1, do_puma,
- "puma - access PUMA FPGA\n",
+ "access PUMA FPGA",
"status - print PUMA status\n"
"puma load addr len - load PUMA configuration data\n");
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index cb79698..99ff507 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -156,7 +156,7 @@
#endif
U_BOOT_CMD (sled, 3, 0, do_sled,
- "sled - check and set status led\n",
+ "check and set status led",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
#endif
#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 8823ed1..9b38425 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -151,7 +151,7 @@
U_BOOT_CMD(
wd, 2, 1, do_wd,
- "wd - check and set watchdog\n",
+ "check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 6ef7fbe..20632a7 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -1194,7 +1194,7 @@
U_BOOT_CMD(
sound , 5, 1, cmd_sound,
- "sound - Sound sub-system\n",
+ "Sound sub-system",
"saw [duration] [freq] [channel]\n"
" - generate sawtooth for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n"
@@ -1206,14 +1206,14 @@
U_BOOT_CMD(
wav , 3, 1, cmd_wav,
- "wav - play wav file\n",
+ "play wav file",
"[addr] [bytes]\n"
" - play wav file at address 'addr' with length 'bytes'\n"
);
U_BOOT_CMD(
beep , 2, 1, cmd_beep,
- "beep - play short beep\n",
+ "play short beep",
"[channel]\n"
" - play short beep on \"l\"eft or \"r\"ight channel\n"
);
@@ -1222,7 +1222,7 @@
#if defined(CONFIG_STK52XX)
U_BOOT_CMD(
fkt , 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"led number on/off\n"
" - 'number's like printed on STK52XX board\n"
"fkt can\n"
@@ -1237,7 +1237,7 @@
#elif defined(CONFIG_FO300)
U_BOOT_CMD(
fkt , 3, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"fkt can\n"
" - loopback plug for X16/X29 required\n"
"fkt rs232 number\n"
diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c
index 214dca6..b9c9e7e 100644
--- a/board/tqc/tqm5200/cmd_tb5200.c
+++ b/board/tqc/tqm5200/cmd_tb5200.c
@@ -90,13 +90,13 @@
U_BOOT_CMD(
led , 2, 1, cmd_led,
- "led - switch status LED on or off\n",
+ "switch status LED on or off",
"on/off\n"
);
U_BOOT_CMD(
backlight , 2, 1, cmd_backlight,
- "backlight - switch backlight on or off\n",
+ "switch backlight on or off",
"on/off\n"
);
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 5d0741d..5bc080f 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -866,7 +866,7 @@
U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump,
- "hwib - dump HWIB'\n",
+ "dump HWIB'",
"\n"
);
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 5020d60..7e2a672 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -258,7 +258,7 @@
U_BOOT_CMD(
burn_in, 1, 1, do_burn_in,
- "burn_in - start burn-in test application on TRAB\n",
+ "start burn-in test application on TRAB",
"\n"
" - start burn-in test application\n"
" The burn-in test could took a while to finish!\n"
@@ -292,7 +292,7 @@
U_BOOT_CMD(
dip, 1, 1, do_dip,
- "dip - read dip switch on TRAB\n",
+ "read dip switch on TRAB",
"\n"
" - read state of dip switch (S1) on TRAB board\n"
" read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
@@ -321,7 +321,7 @@
U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v,
- "vcc5v - read VCC5V on TRAB\n",
+ "read VCC5V on TRAB",
"\n"
" - read actual value of voltage VCC5V\n"
);
@@ -346,7 +346,7 @@
U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp,
- "c_temp - read contact temperature on TRAB\n",
+ "read contact temperature on TRAB",
"\n"
" - reads the onboard temperature (=contact temperature)\n"
);
@@ -398,7 +398,7 @@
U_BOOT_CMD(
bis, 1, 1, do_burn_in_status,
- "bis - print burn in status on TRAB\n",
+ "print burn in status on TRAB",
"\n"
" - prints the status variables of the last burn in test\n"
" stored in the onboard EEPROM on TRAB board\n"
@@ -886,7 +886,7 @@
U_BOOT_CMD(
tlog, 2, 1, do_temp_log,
- "tlog - log contact temperature [1/100 C] to console (endlessly)\n",
+ "log contact temperature [1/100 C] to console (endlessly)",
"delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n"
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 57ff718..7fcc450 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -322,7 +322,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index e11519a..63f1c6c 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -76,7 +76,7 @@
U_BOOT_CMD(
dm9000ee,4,1,do_dm9000_eeprom,
- "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n",
+ "Read/Write eeprom connected to Ethernet Controller",
"\ndm9000ee write <word offset> <value> \n"
"\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n"
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index 5202521..eaec940 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -58,7 +58,7 @@
U_BOOT_CMD(
vpd, 2, 1, do_vpd,
- "vpd - Read Vital Product Data\n",
+ "Read Vital Product Data",
"[dev_addr]\n"
" - Read VPD Data from default address, or device address 'dev_addr'.\n"
);
diff --git a/board/zeus/update.c b/board/zeus/update.c
index 2f2a127..ce1f34f 100644
--- a/board/zeus/update.c
+++ b/board/zeus/update.c
@@ -98,7 +98,7 @@
U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update_boot_eeprom - update boot eeprom content\n",
+ "update boot eeprom content",
NULL
);
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 974bdf2..3f329c2 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -327,7 +327,7 @@
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
- "setdef - write board-specific values to EEPROM (ethaddr...)\n",
+ "write board-specific values to EEPROM (ethaddr...)",
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
);
@@ -418,7 +418,7 @@
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
- "chkreset- Check for status of SW-reset button and act accordingly\n",
+ "Check for status of SW-reset button and act accordingly",
NULL
);