Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/README b/README
index afcc671..86c1304 100644
--- a/README
+++ b/README
@@ -2045,6 +2045,9 @@
- CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
undefine this when you're short of memory.
+- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default
+ width of the commands listed in the 'help' command output.
+
- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to
prompt for user input.
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 753d85b..02a095e 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -155,7 +155,7 @@
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
- "vcimage - loads an image to Display\n",
+ "loads an image to Display",
"vcimage addr\n"
);
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 949af18..6b955d8 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -122,7 +122,7 @@
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD(
boota, 3, 1, do_boota,
- "boota - boot an Amiga kernel\n",
+ "boot an Amiga kernel",
"address disk"
);
#endif /* _CMD_BOOTA_H */
diff --git a/board/MAI/menu/cmd_menu.c b/board/MAI/menu/cmd_menu.c
index 079f1ff..2b97d23 100644
--- a/board/MAI/menu/cmd_menu.c
+++ b/board/MAI/menu/cmd_menu.c
@@ -10,7 +10,7 @@
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD(
menu, 1, 1, do_menu,
- "menu - display BIOS setup menu\n",
+ "display BIOS setup menu",
""
);
#endif
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 11e2be7..4f7dda0 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -101,7 +101,7 @@
U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
- "diufb - Init or Display BMP file\n",
+ "Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index 9fc03f1..d47cf1a 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -96,6 +96,6 @@
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
);
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 35284d1..30046fe 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -190,6 +190,6 @@
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index d362655..2c2849b 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -213,6 +213,6 @@
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
- "bootstrap - program the serial device strap\n",
+ "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 3b49e5b..6b38493 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -237,7 +237,7 @@
U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
- "pllalter- change pll frequence \n",
+ "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
----------------------------------------------\n\
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index e1357f4..d2a3b9e 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -329,7 +329,7 @@
U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
- "l2cache - enable or disable L2 cache\n",
+ "enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache\n"
);
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 3b49e5b..6b38493 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -237,7 +237,7 @@
U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
- "pllalter- change pll frequence \n",
+ "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
----------------------------------------------\n\
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index c840748..6dfd8ba 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -226,6 +226,6 @@
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
- "bootstrap - program the I2C bootstrap EEPROM\n",
+ "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
index 7cc094a..6b68f33 100644
--- a/board/amcc/taihu/lcd.c
+++ b/board/amcc/taihu/lcd.c
@@ -232,25 +232,25 @@
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
- "lcd_cls - lcd clear display\n",
+ "lcd clear display",
NULL
);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
- "lcd_puts - display string on lcd\n",
+ "display string on lcd",
"<string> - <string> to be displayed\n"
);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
- "lcd_putc - display char on lcd\n",
+ "display char on lcd",
"<char> - <char> to be displayed\n"
);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
- "lcd_cur - shift cursor on lcd\n",
+ "shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
" <dir> - 0=backward 1=forward\n"
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index a98c186..5224378 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -93,7 +93,7 @@
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
- "sw2_stat - show status of switch 2\n",
+ "show status of switch 2",
NULL
);
@@ -132,7 +132,7 @@
U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
- "led_ctl - make led 1 or 2 on or off\n",
+ "make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2\t"
);
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 52bad56..8e96905 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -127,6 +127,6 @@
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
- "update_boot_eeprom - update boot eeprom content\n",
+ "update boot eeprom content",
NULL
);
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index 4e14bbc..e4d0705 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -254,16 +254,16 @@
return 0;
}
-U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL);
-U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL);
+U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
+U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
- "lcd_puts - display string on lcd\n",
+ "display string on lcd",
"<string> - <string> to be displayed\n");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
- "lcd_putc - display char on lcd\n",
+ "display char on lcd",
"<char> - <char> to be displayed\n");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
- "lcd_cur - shift cursor on lcd\n",
+ "shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
@@ -373,8 +373,8 @@
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
- "ledon - led test light on\n", NULL);
+ "led test light on", NULL);
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
- "ledoff - led test light off\n", NULL);
+ "led test light off", NULL);
#endif
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index 5b8b88e..b471c95 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -168,7 +168,7 @@
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
- "xbriinfo - Show PCIX bridge info\n", NULL);
+ "Show PCIX bridge info", NULL);
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
@@ -222,7 +222,7 @@
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
- "xdevinfo - Show PCIX Device info\n", NULL);
+ "Show PCIX Device info", NULL);
extern void show_reset_reg(void);
@@ -233,4 +233,4 @@
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
- "resetinfo - Show Reset REG info\n", NULL);
+ "Show Reset REG info", NULL);
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index 96b918b..63f8744 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -74,5 +74,5 @@
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update_boot_eeprom - update bootstrap eeprom content\n", NULL);
+ "update bootstrap eeprom content", NULL);
#endif
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index 5198317..d2ca257 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -281,6 +281,6 @@
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
- "evb440spe - program the serial device strap\n",
+ "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index e9f80ff..fcf2698 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -659,7 +659,7 @@
}
U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
- "temp - interact with the temperature sensor\n",
+ "interact with the temperature sensor",
"temp [s]\n"
" - Show status.\n"
"temp l LOW [HIGH] [THERM]\n"
@@ -674,28 +674,28 @@
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
- "loadace - load fpga configuration from System ACE compact flash\n",
+ "load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
"loadace\n" " - loads default configuration\n");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
- "swconfig- display or modify the software configuration byte\n",
+ "display or modify the software configuration byte",
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
"swconfig\n" " - display software configuration byte\n");
U_BOOT_CMD (pause, 2, 0, do_pause,
- "pause - sleep processor until any key is pressed with poll time of N seconds\n",
+ "sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
" - sleep processor until any key is pressed with poll time of 1 second\n");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
- "swrecon - trigger a board reconfigure to the software selected configuration\n",
+ "trigger a board reconfigure to the software selected configuration",
"\n"
" - trigger a board reconfigure to the software selected configuration\n");
diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index f048155..f727061 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -478,7 +478,7 @@
}
U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
- "eeprom - read/write/copy to/from the PowerSpan II eeprom\n",
+ "read/write/copy to/from the PowerSpan II eeprom",
"eeprom r OFF [NUM]\n"
" - read NUM words starting at OFF\n"
"eeprom w OFF VAL\n"
diff --git a/board/barco/barco.c b/board/barco/barco.c
index e3abca4..a19e1ed 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -306,19 +306,19 @@
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
- " try_working - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
- " boot_working - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
- " boot_default - check flash value and boot the appropriate image\n",
+ "check flash value and boot the appropriate image",
"\n"
);
/*
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index ae5061f..aa46e58 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -194,7 +194,7 @@
}
U_BOOT_CMD (dip, 1, 1, cmd_dip,
- "dip - read dip switch and config inputs\n",
+ "read dip switch and config inputs",
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
@@ -228,7 +228,7 @@
}
U_BOOT_CMD (buz, 2, 1, cmd_buz,
- "buz - turns buzzer on/off\n",
+ "turns buzzer on/off",
"\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
#endif /* CONFIG_BC3450_BUZZER */
@@ -322,7 +322,7 @@
}
U_BOOT_CMD (fp, 3, 1, cmd_fp,
- "fp - front panes access functions\n",
+ "front panes access functions",
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
@@ -523,7 +523,7 @@
}
U_BOOT_CMD (temp, 3, 1, cmd_temp,
- "temp - print current temperature\n",
+ "print current temperature",
"\n" "temp\n" " - print current temperature\n");
#ifdef CONFIG_BC3450_CAN
@@ -816,7 +816,7 @@
return 1;
}
-U_BOOT_CMD (test, 2, 1, cmd_test, "test - unit test routines\n", "\n"
+U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c
index fa650f2..e77bb0c 100644
--- a/board/bf537-stamp/cmd_bf537led.c
+++ b/board/bf537-stamp/cmd_bf537led.c
@@ -196,6 +196,6 @@
/* Register information for u-boot to find this command */
U_BOOT_CMD(led, 3, 1, do_bf537led,
- "led- Control BF537 stamp LEDs\n", USAGE_LONG);
+ "Control BF537 stamp LEDs", USAGE_LONG);
#endif
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 00f0671..52f031c 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -435,7 +435,7 @@
U_BOOT_CMD(
fkt, 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"i2c\n"
" - Test I2C communication\n"
"fkt led\n"
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 878416f..73e6c3e 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -259,7 +259,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 3abcfe6..c4b4b67 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -247,7 +247,7 @@
}
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
- "digtest - Test digital in-/output\n",
+ "Test digital in-/output",
NULL
);
@@ -341,7 +341,7 @@
}
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
- "anatest - Test analog in-/output\n",
+ "Test analog in-/output",
NULL
);
@@ -408,7 +408,7 @@
}
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
- "inctest - Test incremental encoder inputs\n",
+ "Test incremental encoder inputs",
NULL
);
#endif
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 5709d45..d0ee193 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -198,7 +198,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 633f641..4ea373a 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -550,7 +550,7 @@
}
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
- "autoupd - Automatically update images\n",
+ "Automatically update images",
NULL
);
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index ad490c3..0a6626e 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -123,7 +123,7 @@
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
- "loadpci - Wait for pci bootcmd and boot it\n",
+ "Wait for pci bootcmd and boot it",
NULL
);
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 1db8d90..066df74 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -372,6 +372,6 @@
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
- "esdbmp - display BMP image\n",
+ "display BMP image",
"<imageAddr> - display image\n"
);
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
index 318f229..9b2cf90 100644
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
@@ -1859,6 +1859,6 @@
}
U_BOOT_CMD(
cpld, 1, 1, do_cpld,
- "cpld - Program onboard CPLD\n",
+ "Program onboard CPLD",
NULL
);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index dcab906..517b174 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -176,7 +176,7 @@
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index bd569a6..0aca825 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -689,7 +689,7 @@
}
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
- "onewire - Read 1-write ID\n",
+ "Read 1-write ID",
NULL
);
@@ -750,7 +750,7 @@
}
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
- "getbpip - Update IP-Address with Backplane IP-Address\n",
+ "Update IP-Address with Backplane IP-Address",
NULL
);
@@ -786,7 +786,7 @@
}
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
- "setbpip - Write Backplane IP-Address\n",
+ "Write Backplane IP-Address",
NULL
);
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6eedb83..b6b50fb 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -294,5 +294,5 @@
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "writepci- Write some data to pcibus\n",
+ "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 70bae60..4826633 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -993,6 +993,6 @@
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
- "show_config - Show Marvell strapping register\n",
+ "Show Marvell strapping register",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 97a39c9..f405be9 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -227,7 +227,7 @@
U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
- "pci9054 - PLX PCI9054 EEPROM access\n",
+ "PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
"pci9054 update - updates EEPROM with default values\n"
);
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 2f97a12..f9b91b5 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -606,7 +606,7 @@
}
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
- "dcf77 - Check DCF77 receiver\n",
+ "Check DCF77 receiver",
NULL
);
@@ -656,7 +656,7 @@
}
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
- "hubinit - Initialize USB hub\n",
+ "Initialize USB hub",
NULL
);
#endif /* CONFIG_I2C_MULTI_BUS */
@@ -789,7 +789,7 @@
}
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
- "sbe - setup boot eeprom\n",
+ "setup boot eeprom",
NULL
);
@@ -863,7 +863,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
@@ -914,7 +914,7 @@
}
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
- "wpi - Wait for power change interrupt\n",
+ "Wait for power change interrupt",
NULL
);
@@ -959,7 +959,7 @@
}
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
- "dviinit - Initialize DVI Panellink transmitter\n",
+ "Initialize DVI Panellink transmitter",
NULL
);
@@ -999,7 +999,7 @@
}
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
- "time - run command and output execution time\n",
+ "run command and output execution time",
NULL
);
@@ -1049,6 +1049,6 @@
}
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
- "gfxdemo - demo\n",
+ "demo",
NULL
);
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index efadf16..ae3bc80 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -733,7 +733,7 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index f83dfe8..db2c548 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -54,7 +54,7 @@
}
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
- "setdevice - Set device number on pci adapter boards\n",
+ "Set device number on pci adapter boards",
NULL
);
@@ -77,7 +77,7 @@
}
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
- "getdevice - Get device number and set slot env variable\n",
+ "Get device number and set slot env variable",
NULL
);
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index f558a2b..a0d1f3f 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -108,7 +108,7 @@
}
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
- "loadpci - Wait for pci-image and boot it\n",
+ "Wait for pci-image and boot it",
NULL
);
#endif
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 42774ad..0602abf 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -375,7 +375,7 @@
U_BOOT_CMD(
wpeeprom, 2, 1, do_wpeeprom,
- "wpeeprom - Check/Enable/Disable I2C EEPROM write protection\n",
+ "Check/Enable/Disable I2C EEPROM write protection",
"wpeeprom\n"
" - check I2C EEPROM write protection state\n"
"wpeeprom 1\n"
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index f7962af..f225f0e 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -294,7 +294,7 @@
return (0);
}
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL);
+U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
int phypower(int flag)
{
@@ -338,7 +338,7 @@
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
- "phypower- Switch power of ethernet phy\n", NULL);
+ "Switch power of ethernet phy", NULL);
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -369,5 +369,5 @@
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "writepci- Write some data to pcibus\n",
+ "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 85057a2..7c0aaa2 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -333,6 +333,6 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index c0781dc..975b6d6 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -203,6 +203,6 @@
}
U_BOOT_CMD(
cantest, 3, 1, do_cantest,
- "cantest - Test CAN controller",
+ "Test CAN controller",
NULL
);
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 16c9c7e..7808d4d 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -98,7 +98,7 @@
}
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
- "waithci - Wait for host control interrupt\n",
+ "Wait for host control interrupt",
NULL
);
@@ -258,7 +258,7 @@
}
U_BOOT_CMD(
fifo, 5, 1, do_fifo,
- "fifo - Fifo module operations\n",
+ "Fifo module operations",
"wait\nfifo read\n"
"fifo write fifo(0..3) data [cnt=1]\n"
"fifo write address(>=4) data [cnt=1]\n"
@@ -336,7 +336,7 @@
}
U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
- "sbe - setup bootstrap eeprom\n",
+ "setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
@@ -399,7 +399,7 @@
}
U_BOOT_CMD(
painit, 1, 1, do_painit,
- "painit - prepare PciAccess system\n",
+ "prepare PciAccess system",
NULL
);
#endif /* CONFIG_PRAM */
@@ -411,7 +411,7 @@
}
U_BOOT_CMD(
selfreset, 1, 1, do_selfreset,
- "selfreset- assert self-reset# signal\n",
+ "assert self-reset# signal",
NULL
);
@@ -448,7 +448,7 @@
}
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
- "resetout - assert PMC-RESETOUT# signal\n",
+ "assert PMC-RESETOUT# signal",
NULL
);
@@ -480,7 +480,7 @@
}
U_BOOT_CMD(
inta, 2, 1, do_inta,
- "inta - Assert/Deassert or query INTA# state in non-monarch mode\n",
+ "Assert/Deassert or query INTA# state in non-monarch mode",
NULL
);
@@ -513,7 +513,7 @@
}
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
- "pmm - Setup pmm[1] registers\n",
+ "Setup pmm[1] registers",
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
@@ -549,7 +549,7 @@
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 64e6d63..80ff237 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -248,7 +248,7 @@
}
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
- "iploop - iprobe loop <addr>\n",
+ "iprobe loop <addr>",
NULL
);
@@ -301,7 +301,7 @@
}
U_BOOT_CMD(
codec, 1, 1, do_codec,
- "codec - Enable codec\n",
+ "Enable codec",
NULL
);
@@ -334,7 +334,7 @@
}
U_BOOT_CMD(
saa, 5, 1, do_saa,
- "saa - Write to SAA1064 <addr> <instr> <cntrl> <data>\n",
+ "Write to SAA1064 <addr> <instr> <cntrl> <data>",
NULL
);
@@ -373,7 +373,7 @@
}
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
- "iwrite - Write n bytes to I2C-device\n",
+ "Write n bytes to I2C-device",
"addr cnt data0 ... datan\n"
);
@@ -405,7 +405,7 @@
}
U_BOOT_CMD(
iread, 3, 1, do_iread,
- "iread - Read from I2C <addr> <cnt>\n",
+ "Read from I2C <addr> <cnt>",
NULL
);
@@ -443,7 +443,7 @@
}
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
- "ireadl - Read-loop from I2C <addr>\n",
+ "Read-loop from I2C <addr>",
NULL
);
#endif
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index ec65ffd..5480105 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -392,6 +392,6 @@
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
+ "Enable / disable / query EEPROM write access",
NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
index 1d03570..aef9c27 100644
--- a/board/evb64260/zuma_pbb.c
+++ b/board/evb64260/zuma_pbb.c
@@ -202,19 +202,19 @@
U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb,
- "zinit - init zuma pbb\n",
+ "init zuma pbb",
"\n"
" - init zuma pbb\n"
);
U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma,
- "zdtest - run dma test\n",
+ "run dma test",
"[cmd [count]]\n"
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
);
U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox,
- "zminit - init zuma mbox\n",
+ "init zuma mbox",
"\n"
" - init zuma mbox\n"
);
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 96820ac..eb76d93 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -280,7 +280,7 @@
U_BOOT_CMD(
diswd, 1, 0, pixis_disable_watchdog_cmd,
- "diswd - Disable watchdog timer \n",
+ "Disable watchdog timer",
NULL);
#ifdef CONFIG_PIXIS_SGMII_CMD
@@ -539,7 +539,7 @@
U_BOOT_CMD(
pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "pixis_reset - Reset the board using the FPGA sequencer\n",
+ "Reset the board using the FPGA sequencer",
" pixis_reset\n"
" pixis_reset [altbank]\n"
" pixis_reset altbank wd\n"
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 2320c0f..2b2d5d7 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -138,7 +138,7 @@
U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
- "diufb - Init or Display BMP file\n",
+ "Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index 48fc643..b35038d 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -185,7 +185,7 @@
}
U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc,
- "dumpebc - Dump all EBC registers\n",
+ "Dump all EBC registers",
NULL
);
@@ -207,7 +207,7 @@
}
U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr,
- "dumpdcr - Dump all DCR registers\n",
+ "Dump all DCR registers",
NULL
);
@@ -271,7 +271,7 @@
}
U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr,
- "dumpspr - Dump all SPR registers\n",
+ "Dump all SPR registers",
NULL
);
#endif
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 54b3b86..092d368 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -277,7 +277,7 @@
}
U_BOOT_CMD(
fpga, 6, 1, do_fpga,
- "fpga - FPGA sub-system\n",
+ "FPGA sub-system",
"load [type] addr size\n"
" - write the configuration data at memory address `addr',\n"
" size `size' bytes, into the FPGA of type `type' (either\n"
@@ -336,7 +336,7 @@
}
U_BOOT_CMD(
eeclear, 1, 0, do_eecl,
- "eeclear - Clear the eeprom on a Hymod board \n",
+ "Clear the eeprom on a Hymod board",
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
index 141371b..5797880 100644
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -590,7 +590,7 @@
}
U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest,
- "stest - simple send test for hdlc_enet\n",
+ "simple send test for hdlc_enet",
"no arguments\n"
);
/* simple receive test routine */
@@ -612,7 +612,7 @@
}
U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest,
- "rtest - simple receive test for hdlc_enet\n",
+ "simple receive test for hdlc_enet",
"no arguments\n"
);
#endif
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 257f1cd..1b665a9 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -851,7 +851,7 @@
}
U_BOOT_CMD(
pic, 4, 1, do_pic,
- "pic - read and write PIC registers\n",
+ "read and write PIC registers",
"read reg - read PIC register `reg'\n"
"pic write reg val - write value `val' to PIC register `reg'\n"
);
@@ -910,7 +910,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
@@ -982,7 +982,7 @@
U_BOOT_CMD(
lsb, 2, 1, do_lsb,
- "lsb - check and set LSB switch\n",
+ "check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
"lsb - print current setting\n"
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index 0a8787a..bafd39c 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -432,7 +432,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index adecad0..4c04b98 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -486,7 +486,7 @@
U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp,
- "eepromwp- eeprom write protect off/on\n",
+ "eeprom write protect off/on",
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
);
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
index 6ad95b5..dc13804 100644
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -55,7 +55,7 @@
}
U_BOOT_CMD(
mip405, 8, 1, do_mip405,
- "mip405 - MIP405 specific Cmds\n",
+ "MIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n"
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 9d9531b..95bfdcc 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -427,7 +427,7 @@
U_BOOT_CMD(
pati, 8, 1, do_pati,
- "pati - PATI specific Cmds\n",
+ "PATI specific Cmds",
"info - displays board information\n"
"pati pci - displays PCI registers\n"
"pati led <nr> <on> \n"
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
index 945e5c9..ad5e0a1 100644
--- a/board/mpl/pip405/cmd_pip405.c
+++ b/board/mpl/pip405/cmd_pip405.c
@@ -60,7 +60,7 @@
}
U_BOOT_CMD(
pip405, 6, 1, do_pip405,
- "pip405 - PIP405 specific Cmds\n",
+ "PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
"pip405 flash mps - updates U-Boot with image from MPS\n"
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index d3629c5..2748fa9 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -175,6 +175,6 @@
U_BOOT_CMD(
vcma9, 6, 1, do_vcma9,
- "vcma9 - VCMA9 specific commands\n",
+ "VCMA9 specific commands",
"flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
);
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index c706ca5..80c2cb5 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -236,7 +236,7 @@
U_BOOT_CMD(
wd, 2, 1, do_wd,
- "wd - check and set watchdog\n",
+ "check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 01ceece..5fd3291 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -761,7 +761,7 @@
U_BOOT_CMD(
led, 2, 1, do_led,
- "led - set the DIAG-LED\n",
+ "set the DIAG-LED",
"[bitmask] 0x01 = DIAG 1 on\n"
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
@@ -823,7 +823,7 @@
U_BOOT_CMD(
sha1, 4, 1, do_sha1,
- "sha1 - calculate the SHA1 Sum\n",
+ "calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
" -c check the U-Boot image in flash\n"
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index bb98fcf..10d0df6 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -53,7 +53,7 @@
}
U_BOOT_CMD(
led , 3, 1, do_led,
- "led - set LED 0..11 on the PN62 board\n",
+ "set LED 0..11 on the PN62 board",
"i fun\n"
" - set 'i'th LED to function 'fun'\n"
);
@@ -174,7 +174,7 @@
U_BOOT_CMD(
loadpci, 2, 1, do_loadpci,
- "loadpci - load binary file over PCI\n",
+ "load binary file over PCI",
"[addr]\n"
" - load binary file over PCI to address 'addr'\n"
);
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 9b87f6a..8777284 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -227,7 +227,7 @@
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
- "fpga - boot FPGA\n",
+ "boot FPGA",
"address size\n - boot FPGA with gzipped image at <address>\n"
);
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index b0aa8dd..aa598aa 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -128,7 +128,7 @@
}
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
- "idpcmd - custom IDP command\n",
+ "custom IDP command",
"no args at this time\n"
);
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index b502e4d..1871984 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -414,6 +414,6 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index 8b04453..6d0bbc0 100644
--- a/board/renesas/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -323,7 +323,7 @@
U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
- "setmac - write MAC address for RTL8110SCL\n",
+ "write MAC address for RTL8110SCL",
"\n"
"setmac <mac address> - write MAC address for RTL8110SCL\n"
);
@@ -342,7 +342,7 @@
U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
- "printmac - print MAC address for RTL8110\n",
+ "print MAC address for RTL8110",
"\n"
" - print MAC address for RTL8110\n"
);
diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 22079fb..6dbb784 100644
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -159,7 +159,7 @@
U_BOOT_CMD(
hwtest, 2, 1, do_hw_test,
- "hwtest - hardware test for R0P7785LC0011RL board\n",
+ "hardware test for R0P7785LC0011RL board",
"\n"
"hwtest all - test all hardware\n"
"hwtest pld - output PLD version\n"
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index 9af6b8d..c1af70c 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -500,7 +500,7 @@
U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe,
- "iprobe1 - probe to discover valid I2C chip addresses\n",
+ "probe to discover valid I2C chip addresses",
"\n -discover valid I2C chip addresses\n"
);
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index 8d97a9c..9b94af5 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -578,7 +578,7 @@
}
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "kasetup - Set environment to factory defaults\n", NULL);
+ "Set environment to factory defaults", NULL);
U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "karecover - Set environment to allow for fs recovery\n", NULL);
+ "Set environment to allow for fs recovery", NULL);
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index 19302dc..ec4c451 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -544,7 +544,7 @@
}
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
- "mbsetup - Set environment to factory defaults\n", NULL);
+ "Set environment to factory defaults", NULL);
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
- "mbrecover - Set environment to allow for fs recovery\n", NULL);
+ "Set environment to allow for fs recovery", NULL);
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index 63aa179..c9a93e1 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -292,7 +292,7 @@
U_BOOT_CMD(
fpga, 4, 1, do_fpga,
- "fpga - access FPGA(s)\n",
+ "access FPGA(s)",
"fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n"
"fpga load [name] addr - load FPGA configuration data\n"
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 25cf2bb..f87d6bc 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -404,7 +404,7 @@
}
U_BOOT_CMD (puma, 4, 1, do_puma,
- "puma - access PUMA FPGA\n",
+ "access PUMA FPGA",
"status - print PUMA status\n"
"puma load addr len - load PUMA configuration data\n");
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index cb79698..99ff507 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -156,7 +156,7 @@
#endif
U_BOOT_CMD (sled, 3, 0, do_sled,
- "sled - check and set status led\n",
+ "check and set status led",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
#endif
#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 8823ed1..9b38425 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -151,7 +151,7 @@
U_BOOT_CMD(
wd, 2, 1, do_wd,
- "wd - check and set watchdog\n",
+ "check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 6ef7fbe..20632a7 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -1194,7 +1194,7 @@
U_BOOT_CMD(
sound , 5, 1, cmd_sound,
- "sound - Sound sub-system\n",
+ "Sound sub-system",
"saw [duration] [freq] [channel]\n"
" - generate sawtooth for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n"
@@ -1206,14 +1206,14 @@
U_BOOT_CMD(
wav , 3, 1, cmd_wav,
- "wav - play wav file\n",
+ "play wav file",
"[addr] [bytes]\n"
" - play wav file at address 'addr' with length 'bytes'\n"
);
U_BOOT_CMD(
beep , 2, 1, cmd_beep,
- "beep - play short beep\n",
+ "play short beep",
"[channel]\n"
" - play short beep on \"l\"eft or \"r\"ight channel\n"
);
@@ -1222,7 +1222,7 @@
#if defined(CONFIG_STK52XX)
U_BOOT_CMD(
fkt , 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"led number on/off\n"
" - 'number's like printed on STK52XX board\n"
"fkt can\n"
@@ -1237,7 +1237,7 @@
#elif defined(CONFIG_FO300)
U_BOOT_CMD(
fkt , 3, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"fkt can\n"
" - loopback plug for X16/X29 required\n"
"fkt rs232 number\n"
diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c
index 214dca6..b9c9e7e 100644
--- a/board/tqc/tqm5200/cmd_tb5200.c
+++ b/board/tqc/tqm5200/cmd_tb5200.c
@@ -90,13 +90,13 @@
U_BOOT_CMD(
led , 2, 1, cmd_led,
- "led - switch status LED on or off\n",
+ "switch status LED on or off",
"on/off\n"
);
U_BOOT_CMD(
backlight , 2, 1, cmd_backlight,
- "backlight - switch backlight on or off\n",
+ "switch backlight on or off",
"on/off\n"
);
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 5d0741d..5bc080f 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -866,7 +866,7 @@
U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump,
- "hwib - dump HWIB'\n",
+ "dump HWIB'",
"\n"
);
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 5020d60..7e2a672 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -258,7 +258,7 @@
U_BOOT_CMD(
burn_in, 1, 1, do_burn_in,
- "burn_in - start burn-in test application on TRAB\n",
+ "start burn-in test application on TRAB",
"\n"
" - start burn-in test application\n"
" The burn-in test could took a while to finish!\n"
@@ -292,7 +292,7 @@
U_BOOT_CMD(
dip, 1, 1, do_dip,
- "dip - read dip switch on TRAB\n",
+ "read dip switch on TRAB",
"\n"
" - read state of dip switch (S1) on TRAB board\n"
" read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
@@ -321,7 +321,7 @@
U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v,
- "vcc5v - read VCC5V on TRAB\n",
+ "read VCC5V on TRAB",
"\n"
" - read actual value of voltage VCC5V\n"
);
@@ -346,7 +346,7 @@
U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp,
- "c_temp - read contact temperature on TRAB\n",
+ "read contact temperature on TRAB",
"\n"
" - reads the onboard temperature (=contact temperature)\n"
);
@@ -398,7 +398,7 @@
U_BOOT_CMD(
bis, 1, 1, do_burn_in_status,
- "bis - print burn in status on TRAB\n",
+ "print burn in status on TRAB",
"\n"
" - prints the status variables of the last burn in test\n"
" stored in the onboard EEPROM on TRAB board\n"
@@ -886,7 +886,7 @@
U_BOOT_CMD(
tlog, 2, 1, do_temp_log,
- "tlog - log contact temperature [1/100 C] to console (endlessly)\n",
+ "log contact temperature [1/100 C] to console (endlessly)",
"delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n"
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 57ff718..7fcc450 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -322,7 +322,7 @@
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
+ "read keyboard status",
NULL
);
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index e11519a..63f1c6c 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -76,7 +76,7 @@
U_BOOT_CMD(
dm9000ee,4,1,do_dm9000_eeprom,
- "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n",
+ "Read/Write eeprom connected to Ethernet Controller",
"\ndm9000ee write <word offset> <value> \n"
"\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n"
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index 5202521..eaec940 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -58,7 +58,7 @@
U_BOOT_CMD(
vpd, 2, 1, do_vpd,
- "vpd - Read Vital Product Data\n",
+ "Read Vital Product Data",
"[dev_addr]\n"
" - Read VPD Data from default address, or device address 'dev_addr'.\n"
);
diff --git a/board/zeus/update.c b/board/zeus/update.c
index 2f2a127..ce1f34f 100644
--- a/board/zeus/update.c
+++ b/board/zeus/update.c
@@ -98,7 +98,7 @@
U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update_boot_eeprom - update boot eeprom content\n",
+ "update boot eeprom content",
NULL
);
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 974bdf2..3f329c2 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -327,7 +327,7 @@
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
- "setdef - write board-specific values to EEPROM (ethaddr...)\n",
+ "write board-specific values to EEPROM (ethaddr...)",
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
);
@@ -418,7 +418,7 @@
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
- "chkreset- Check for status of SW-reset button and act accordingly\n",
+ "Check for status of SW-reset button and act accordingly",
NULL
);
diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c
index 43427bb..06531f1 100644
--- a/common/cmd_ambapp.c
+++ b/common/cmd_ambapp.c
@@ -273,6 +273,6 @@
}
U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
- "ambapp - list AMBA Plug&Play information\n",
+ "list AMBA Plug&Play information",
"ambapp\n"
" - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");
diff --git a/common/cmd_autoscript.c b/common/cmd_autoscript.c
index 4517ac8..e5a9bc0 100644
--- a/common/cmd_autoscript.c
+++ b/common/cmd_autoscript.c
@@ -230,7 +230,7 @@
U_BOOT_CMD(
autoscr, 2, 0, do_autoscript,
- "autoscr - run script from memory\n",
+ "run script from memory",
"[addr] - run script starting at addr"
" - A valid autoscr header must be present\n"
#if defined(CONFIG_FIT)
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index b660d2a..8e9251d 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -444,6 +444,6 @@
U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo,
- "bdinfo - print Board Info structure\n",
+ "print Board Info structure",
NULL
);
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index 1dda193..cd9e720 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -107,7 +107,7 @@
} /* do_bedbug_dis */
U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
- "ds - disassemble memory\n",
+ "disassemble memory",
"ds <address> [# instructions]\n");
/* ======================================================================
@@ -160,7 +160,7 @@
} /* do_bedbug_asm */
U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
- "as - assemble memory\n", "as <address>\n");
+ "assemble memory", "as <address>\n");
/* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the
@@ -177,7 +177,7 @@
} /* do_bedbug_break */
U_BOOT_CMD (break, 3, 0, do_bedbug_break,
- "break - set or clear a breakpoint\n",
+ "set or clear a breakpoint",
" - Set or clear a breakpoint\n"
"break <address> - Break at an address\n"
"break off <bp#> - Disable breakpoint.\n"
@@ -277,7 +277,7 @@
} /* do_bedbug_continue */
U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
- "continue- continue from a breakpoint\n",
+ "continue from a breakpoint",
" - continue from a breakpoint.\n");
/* ======================================================================
@@ -308,7 +308,7 @@
} /* do_bedbug_step */
U_BOOT_CMD (step, 1, 1, do_bedbug_step,
- "step - single step execution.\n",
+ "single step execution.",
" - single step execution.\n");
/* ======================================================================
@@ -339,7 +339,7 @@
} /* do_bedbug_next */
U_BOOT_CMD (next, 1, 1, do_bedbug_next,
- "next - single step execution, stepping over subroutines.\n",
+ "single step execution, stepping over subroutines.",
" - single step execution, stepping over subroutines.\n");
/* ======================================================================
@@ -384,7 +384,7 @@
} /* do_bedbug_stack */
U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
- "where - Print the running stack.\n",
+ "Print the running stack.",
" - Print the running stack.\n");
/* ======================================================================
@@ -405,7 +405,7 @@
} /* do_bedbug_rdump */
U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
- "rdump - Show registers.\n", " - Show registers.\n");
+ "Show registers.", " - Show registers.\n");
/* ====================================================================== */
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index e60f18b..abbb070 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -139,7 +139,7 @@
U_BOOT_CMD(
bmp, 5, 1, do_bmp,
- "bmp - manipulate BMP image data\n",
+ "manipulate BMP image data",
"info <imageAddr> - display image info\n"
"bmp display <imageAddr> [x y] - display image at x,y\n"
);
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index 36106c7..efc1a02 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -64,7 +64,7 @@
U_BOOT_CMD(
go, CONFIG_SYS_MAXARGS, 1, do_go,
- "go - start application at address 'addr'\n",
+ "start application at address 'addr'",
"addr [arg ...]\n - start application at address 'addr'\n"
" passing 'arg' as arguments\n"
);
@@ -73,6 +73,6 @@
U_BOOT_CMD(
reset, 1, 0, do_reset,
- "reset - Perform RESET of the CPU\n",
+ "Perform RESET of the CPU",
NULL
);
diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c
index e6474aa..b525f0d 100644
--- a/common/cmd_bootldr.c
+++ b/common/cmd_bootldr.c
@@ -59,6 +59,6 @@
}
U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
- "bootldr - boot ldr image from memory\n",
+ "boot ldr image from memory",
"[addr]\n"
" - boot ldr image stored in memory\n");
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 68f1675..07f6c6b 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -913,7 +913,7 @@
U_BOOT_CMD(
bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
- "bootm - boot application image from memory\n",
+ "boot application image from memory",
"[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
"\t'arg' can be the address of an initrd image\n"
@@ -970,14 +970,14 @@
U_BOOT_CMD(
boot, 1, 1, do_bootd,
- "boot - boot default, i.e., run 'bootcmd'\n",
+ "boot default, i.e., run 'bootcmd'",
NULL
);
/* keep old command name "bootd" for backward compatibility */
U_BOOT_CMD(
bootd, 1, 1, do_bootd,
- "bootd - boot default, i.e., run 'bootcmd'\n",
+ "boot default, i.e., run 'bootcmd'",
NULL
);
@@ -1062,7 +1062,7 @@
U_BOOT_CMD(
iminfo, CONFIG_SYS_MAXARGS, 1, do_iminfo,
- "iminfo - print header information for application image\n",
+ "print header information for application image",
"addr [addr ...]\n"
" - print header information for application image starting at\n"
" address 'addr' in memory; this includes verification of the\n"
@@ -1130,7 +1130,7 @@
U_BOOT_CMD(
imls, 1, 1, do_imls,
- "imls - list all images found in flash\n",
+ "list all images found in flash",
"\n"
" - Prints information about all images found at sector\n"
" boundaries in flash.\n"
diff --git a/common/cmd_cache.c b/common/cmd_cache.c
index caa56da..c0f2cba 100644
--- a/common/cmd_cache.c
+++ b/common/cmd_cache.c
@@ -97,14 +97,14 @@
U_BOOT_CMD(
icache, 2, 1, do_icache,
- "icache - enable or disable instruction cache\n",
+ "enable or disable instruction cache",
"[on, off]\n"
" - enable or disable instruction cache\n"
);
U_BOOT_CMD(
dcache, 2, 1, do_dcache,
- "dcache - enable or disable data cache\n",
+ "enable or disable data cache",
"[on, off]\n"
" - enable or disable data (writethrough) cache\n"
);
diff --git a/common/cmd_console.c b/common/cmd_console.c
index e2bc2a3..f861f83 100644
--- a/common/cmd_console.c
+++ b/common/cmd_console.c
@@ -65,6 +65,6 @@
U_BOOT_CMD(
coninfo, 3, 1, do_coninfo,
- "coninfo - print console devices and information\n",
+ "print console devices and information",
""
);
diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c
index b2bbec1..629e6a9 100644
--- a/common/cmd_cplbinfo.c
+++ b/common/cmd_cplbinfo.c
@@ -54,6 +54,6 @@
}
U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
- "cplbinfo- display current CPLB tables\n",
+ "display current CPLB tables",
"\n"
" - display current CPLB tables\n");
diff --git a/common/cmd_date.c b/common/cmd_date.c
index d6bd931..3d78be2 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -214,7 +214,7 @@
U_BOOT_CMD(
date, 2, 1, do_date,
- "date - get/set/reset date & time\n",
+ "get/set/reset date & time",
"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
" - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n"
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index 7d382bb..7aed06c 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -223,23 +223,23 @@
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
- "getdcr - Get an AMCC PPC 4xx DCR's value\n",
+ "Get an AMCC PPC 4xx DCR's value",
"dcrn - return a DCR's value.\n"
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
- "setdcr - Set an AMCC PPC 4xx DCR's value\n",
+ "Set an AMCC PPC 4xx DCR's value",
"dcrn - set a DCR's value.\n"
);
U_BOOT_CMD(
getidcr, 3, 1, do_getidcr,
- "getidcr - Get a register value via indirect DCR addressing\n",
+ "Get a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n"
);
U_BOOT_CMD(
setidcr, 4, 1, do_setidcr,
- "setidcr - Set a register value via indirect DCR addressing\n",
+ "Set a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
);
diff --git a/common/cmd_df.c b/common/cmd_df.c
index c85b7a6..d64f900 100644
--- a/common/cmd_df.c
+++ b/common/cmd_df.c
@@ -33,5 +33,5 @@
U_BOOT_CMD(
sf, 2, 1, do_serial_flash,
- "sf - Serial flash sub-system\n",
+ "Serial flash sub-system",
"probe [bus:]cs - init flash device on given SPI bus and CS\n")
diff --git a/common/cmd_diag.c b/common/cmd_diag.c
index 13d4225..c2a6175 100644
--- a/common/cmd_diag.c
+++ b/common/cmd_diag.c
@@ -66,7 +66,7 @@
U_BOOT_CMD(
diag, CONFIG_SYS_MAXARGS, 0, do_diag,
- "diag - perform board diagnostics\n",
+ "perform board diagnostics",
" - print list of available tests\n"
"diag [test1 [test2]]\n"
" - print information about specified tests\n"
diff --git a/common/cmd_display.c b/common/cmd_display.c
index 982e09d..4102424 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -71,7 +71,7 @@
U_BOOT_CMD(
display, CONFIG_SYS_MAXARGS, 1, do_display,
- "display- display string on dot matrix display\n",
+ "display string on dot matrix display",
"[<string>]\n"
" - with <string> argument: display <string> on dot matrix display\n"
" - without arguments: clear dot matrix display\n"
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index f139d42..e2d4a42 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -191,7 +191,7 @@
}
U_BOOT_CMD(
doc, 5, 1, do_doc,
- "doc - Disk-On-Chip sub-system\n",
+ "Disk-On-Chip sub-system",
"info - show available DOC devices\n"
"doc device [dev] - show or set current device\n"
"doc read addr off size\n"
@@ -337,7 +337,7 @@
U_BOOT_CMD(
docboot, 4, 1, do_docboot,
- "docboot - boot from DOC device\n",
+ "boot from DOC device",
"loadAddr dev\n"
);
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index c5b1d4d..7783c88 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -55,6 +55,6 @@
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
- "dtt - Digital Thermometer and Thermostat\n",
+ "Digital Thermometer and Thermostat",
" - Read temperature from digital thermometer and thermostat.\n"
);
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index c59227d..e598bf1 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -425,7 +425,7 @@
#ifdef CONFIG_SYS_I2C_MULTI_EEPROMS
U_BOOT_CMD(
eeprom, 6, 1, do_eeprom,
- "eeprom - EEPROM sub-system\n",
+ "EEPROM sub-system",
"read devaddr addr off cnt\n"
"eeprom write devaddr addr off cnt\n"
" - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n"
@@ -433,7 +433,7 @@
#else /* One EEPROM */
U_BOOT_CMD(
eeprom, 5, 1, do_eeprom,
- "eeprom - EEPROM sub-system\n",
+ "EEPROM sub-system",
"read addr off cnt\n"
"eeprom write addr off cnt\n"
" - read/write `cnt' bytes at EEPROM offset `off'\n"
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 27a4b73..19e1249 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -310,12 +310,12 @@
/* ====================================================================== */
U_BOOT_CMD(
bootelf, 2, 0, do_bootelf,
- "bootelf - Boot from an ELF image in memory\n",
+ "Boot from an ELF image in memory",
" [address] - load address of ELF image.\n"
);
U_BOOT_CMD(
bootvx, 2, 0, do_bootvx,
- "bootvx - Boot vxWorks from an ELF image\n",
+ "Boot vxWorks from an ELF image",
" [address] - load address of vxWorks ELF image.\n"
);
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 05a053b..c2dcc64 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -116,7 +116,7 @@
U_BOOT_CMD(
ext2ls, 4, 1, do_ext2ls,
- "ext2ls - list files in a directory (default /)\n",
+ "list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'\n"
);
@@ -252,7 +252,7 @@
U_BOOT_CMD(
ext2load, 6, 0, do_ext2load,
- "ext2load- load binary file from a Ext2 filesystem\n",
+ "load binary file from a Ext2 filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from ext2 filesystem\n"
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index ebe9e09..4a26b80 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -88,7 +88,7 @@
U_BOOT_CMD(
fatload, 6, 0, do_fat_fsload,
- "fatload - load binary file from a dos filesystem\n",
+ "load binary file from a dos filesystem",
"<interface> <dev[:part]> <addr> <filename> [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from dos filesystem\n"
@@ -136,7 +136,7 @@
U_BOOT_CMD(
fatls, 4, 1, do_fat_ls,
- "fatls - list files in a directory (default /)\n",
+ "list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'\n"
);
@@ -174,7 +174,7 @@
U_BOOT_CMD(
fatinfo, 3, 1, do_fat_fsinfo,
- "fatinfo - print information about filesystem\n",
+ "print information about filesystem",
"<interface> <dev[:part]>\n"
" - print information about filesystem from 'dev' on 'interface'\n"
);
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index c6265c3..c043b97 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -902,7 +902,7 @@
U_BOOT_CMD(
fdcboot, 3, 1, do_fdcboot,
- "fdcboot - boot from floppy device\n",
+ "boot from floppy device",
"loadAddr drive\n"
);
#endif
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index 514c049..bcf98d9 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -142,12 +142,12 @@
U_BOOT_CMD(
fdosboot, 3, 0, do_fdosboot,
- "fdosboot- boot from a dos floppy file\n",
+ "boot from a dos floppy file",
"[loadAddr] [filename]\n"
);
U_BOOT_CMD(
fdosls, 2, 0, do_fdosls,
- "fdosls - list files in a directory\n",
+ "list files in a directory",
"[directory]\n"
);
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index a36ca20..0947b72 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -819,7 +819,7 @@
U_BOOT_CMD(
fdt, 255, 0, do_fdt,
- "fdt - flattened device tree utility commands\n",
+ "flattened device tree utility commands",
"addr <addr> [<length>] - Set the fdt location to <addr>\n"
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 2df40f0..510654e 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -710,14 +710,14 @@
U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
- "flinfo - print FLASH memory information\n",
+ "print FLASH memory information",
"\n - print information for all FLASH memory banks\n"
"flinfo N\n - print information for FLASH memory bank # N\n"
);
U_BOOT_CMD(
erase, 3, 0, do_flerase,
- "erase - erase FLASH memory\n",
+ "erase FLASH memory",
"start end\n"
" - erase FLASH from addr 'start' to addr 'end'\n"
"erase start +len\n"
@@ -731,7 +731,7 @@
U_BOOT_CMD(
protect, 4, 0, do_protect,
- "protect - enable or disable FLASH write protection\n",
+ "enable or disable FLASH write protection",
"on start end\n"
" - protect FLASH from addr 'start' to addr 'end'\n"
"protect on start +len\n"
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 4abb86e..362bffd 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -350,7 +350,7 @@
}
U_BOOT_CMD (fpga, 6, 1, do_fpga,
- "fpga - loadable FPGA image support\n",
+ "loadable FPGA image support",
"fpga [operation type] [device number] [image address] [image size]\n"
"fpga operations:\n"
"\tinfo\tlist known device information\n"
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 170ebc7..16439ac 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1303,7 +1303,7 @@
#if defined(CONFIG_I2C_CMD_TREE)
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
- "i2c - I2C sub-system\n",
+ "I2C sub-system",
#if defined(CONFIG_I2C_MUX)
"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.\n"
#endif /* CONFIG_I2C_MUX */
@@ -1326,37 +1326,37 @@
#endif /* CONFIG_I2C_CMD_TREE */
U_BOOT_CMD(
imd, 4, 1, do_i2c_md, \
- "imd - i2c memory display\n", \
+ "i2c memory display", \
"chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \
);
U_BOOT_CMD(
imm, 3, 1, do_i2c_mm,
- "imm - i2c memory modify (auto-incrementing)\n",
+ "i2c memory modify (auto-incrementing)",
"chip address[.0, .1, .2]\n"
" - memory modify, auto increment address\n"
);
U_BOOT_CMD(
inm, 3, 1, do_i2c_nm,
- "inm - memory modify (constant address)\n",
+ "memory modify (constant address)",
"chip address[.0, .1, .2]\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
imw, 5, 1, do_i2c_mw,
- "imw - memory write (fill)\n",
+ "memory write (fill)",
"chip address[.0, .1, .2] value [count]\n - memory write (fill)\n"
);
U_BOOT_CMD(
icrc32, 5, 1, do_i2c_crc,
- "icrc32 - checksum calculation\n",
+ "checksum calculation",
"chip address[.0, .1, .2] count\n - compute CRC32 checksum\n"
);
U_BOOT_CMD(
iprobe, 1, 1, do_i2c_probe,
- "iprobe - probe to discover valid I2C chip addresses\n",
+ "probe to discover valid I2C chip addresses",
"\n -discover valid I2C chip addresses\n"
);
@@ -1365,7 +1365,7 @@
*/
U_BOOT_CMD(
iloop, 5, 1, do_i2c_loop,
- "iloop - infinite loop on address range\n",
+ "infinite loop on address range",
"chip address[.0, .1, .2] [# of objects]\n"
" - loop, reading a set of addresses\n"
);
@@ -1373,7 +1373,7 @@
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD(
isdram, 2, 1, do_sdram,
- "isdram - print SDRAM configuration information\n",
+ "print SDRAM configuration information",
"chip\n - print SDRAM configuration information\n"
" (valid chip values 50..57)\n"
);
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 3afa38d..c9b9a47 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -2140,7 +2140,7 @@
U_BOOT_CMD(
ide, 5, 1, do_ide,
- "ide - IDE sub-system\n",
+ "IDE sub-system",
"reset - reset IDE controller\n"
"ide info - show available IDE devices\n"
"ide device [dev] - show or set current device\n"
@@ -2153,6 +2153,6 @@
U_BOOT_CMD(
diskboot, 3, 1, do_diskboot,
- "diskboot- boot from IDE device\n",
+ "boot from IDE device",
"loadAddr dev:part\n"
);
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 13ad94e..c8367f0 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -614,105 +614,105 @@
U_BOOT_CMD(
siuinfo, 1, 1, do_siuinfo,
- "siuinfo - print System Interface Unit (SIU) registers\n",
+ "print System Interface Unit (SIU) registers",
NULL
);
U_BOOT_CMD(
memcinfo, 1, 1, do_memcinfo,
- "memcinfo- print Memory Controller registers\n",
+ "print Memory Controller registers",
NULL
);
U_BOOT_CMD(
sitinfo, 1, 1, do_sitinfo,
- "sitinfo - print System Integration Timers (SIT) registers\n",
+ "print System Integration Timers (SIT) registers",
NULL
);
#ifdef CONFIG_8260
U_BOOT_CMD(
icinfo, 1, 1, do_icinfo,
- "icinfo - print Interrupt Controller registers\n",
+ "print Interrupt Controller registers",
NULL
);
#endif
U_BOOT_CMD(
carinfo, 1, 1, do_carinfo,
- "carinfo - print Clocks and Reset registers\n",
+ "print Clocks and Reset registers",
NULL
);
U_BOOT_CMD(
iopinfo, 1, 1, do_iopinfo,
- "iopinfo - print I/O Port registers\n",
+ "print I/O Port registers",
NULL
);
U_BOOT_CMD(
iopset, 5, 0, do_iopset,
- "iopset - set I/O Port registers\n",
+ "set I/O Port registers",
"PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1"
);
U_BOOT_CMD(
dmainfo, 1, 1, do_dmainfo,
- "dmainfo - print SDMA/IDMA registers\n",
+ "print SDMA/IDMA registers",
NULL
);
U_BOOT_CMD(
fccinfo, 1, 1, do_fccinfo,
- "fccinfo - print FCC registers\n",
+ "print FCC registers",
NULL
);
U_BOOT_CMD(
brginfo, 1, 1, do_brginfo,
- "brginfo - print Baud Rate Generator (BRG) registers\n",
+ "print Baud Rate Generator (BRG) registers",
NULL
);
U_BOOT_CMD(
i2cinfo, 1, 1, do_i2cinfo,
- "i2cinfo - print I2C registers\n",
+ "print I2C registers",
NULL
);
U_BOOT_CMD(
sccinfo, 1, 1, do_sccinfo,
- "sccinfo - print SCC registers\n",
+ "print SCC registers",
NULL
);
U_BOOT_CMD(
smcinfo, 1, 1, do_smcinfo,
- "smcinfo - print SMC registers\n",
+ "print SMC registers",
NULL
);
U_BOOT_CMD(
spiinfo, 1, 1, do_spiinfo,
- "spiinfo - print Serial Peripheral Interface (SPI) registers\n",
+ "print Serial Peripheral Interface (SPI) registers",
NULL
);
U_BOOT_CMD(
muxinfo, 1, 1, do_muxinfo,
- "muxinfo - print CPM Multiplexing registers\n",
+ "print CPM Multiplexing registers",
NULL
);
U_BOOT_CMD(
siinfo, 1, 1, do_siinfo,
- "siinfo - print Serial Interface (SI) registers\n",
+ "print Serial Interface (SI) registers",
NULL
);
U_BOOT_CMD(
mccinfo, 1, 1, do_mccinfo,
- "mccinfo - print MCC registers\n",
+ "print MCC registers",
NULL
);
diff --git a/common/cmd_irq.c b/common/cmd_irq.c
index a47cde4..a21aede 100644
--- a/common/cmd_irq.c
+++ b/common/cmd_irq.c
@@ -44,7 +44,7 @@
U_BOOT_CMD(
interrupts, 5, 0, do_interrupts,
- "interrupts - enable or disable interrupts\n",
+ "enable or disable interrupts",
"[on, off]\n"
" - enable or disable interrupts\n"
);
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index b3025e3..309b08b 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -190,6 +190,6 @@
U_BOOT_CMD(
itest, 4, 0, do_itest,
- "itest\t- return true/false on integer compare\n",
+ "return true/false on integer compare",
"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
);
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 4c63f51..d0a7cea 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -2297,35 +2297,35 @@
/***************************************************/
U_BOOT_CMD(
fsload, 3, 0, do_jffs2_fsload,
- "fsload\t- load binary file from a filesystem image\n",
+ "load binary file from a filesystem image",
"[ off ] [ filename ]\n"
" - load binary file from flash bank\n"
" with offset 'off'\n"
);
U_BOOT_CMD(
ls, 2, 1, do_jffs2_ls,
- "ls\t- list files in a directory (default /)\n",
+ "list files in a directory (default /)",
"[ directory ]\n"
" - list files in a directory.\n"
);
U_BOOT_CMD(
fsinfo, 1, 1, do_jffs2_fsinfo,
- "fsinfo\t- print information about filesystems\n",
+ "print information about filesystems",
" - print information about filesystems\n"
);
#ifdef CONFIG_JFFS2_CMDLINE
U_BOOT_CMD(
chpart, 2, 0, do_jffs2_chpart,
- "chpart\t- change active partition\n",
+ "change active partition",
"part-id\n"
" - change active partition (e.g. part-id = nand0,1)\n"
);
U_BOOT_CMD(
mtdparts, 6, 0, do_jffs2_mtdparts,
- "mtdparts- define flash/nand partitions\n",
+ "define flash/nand partitions",
"\n"
" - list partition table\n"
"mtdparts delall\n"
diff --git a/common/cmd_license.c b/common/cmd_license.c
index 301af8d..c3c3496 100644
--- a/common/cmd_license.c
+++ b/common/cmd_license.c
@@ -53,7 +53,7 @@
}
U_BOOT_CMD(license, 1, 1, do_license,
- "license - print GPL license text\n",
+ "print GPL license text",
NULL);
#endif /* CONFIG_CMD_LICENSE */
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 350d7a3..88fba88 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -1045,7 +1045,7 @@
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
loads, 3, 0, do_load_serial,
- "loads - load S-Record file over serial line\n",
+ "load S-Record file over serial line",
"[ off ] [ baud ]\n"
" - load S-Record file over serial line"
" with offset 'off' and baudrate 'baud'\n"
@@ -1054,7 +1054,7 @@
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
loads, 2, 0, do_load_serial,
- "loads - load S-Record file over serial line\n",
+ "load S-Record file over serial line",
"[ off ]\n"
" - load S-Record file over serial line with offset 'off'\n"
);
@@ -1069,7 +1069,7 @@
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
saves, 4, 0, do_save_serial,
- "saves - save S-Record file over serial line\n",
+ "save S-Record file over serial line",
"[ off ] [size] [ baud ]\n"
" - save S-Record file over serial line"
" with offset 'off', size 'size' and baudrate 'baud'\n"
@@ -1077,7 +1077,7 @@
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
saves, 3, 0, do_save_serial,
- "saves - save S-Record file over serial line\n",
+ "save S-Record file over serial line",
"[ off ] [size]\n"
" - save S-Record file over serial line with offset 'off' and size 'size'\n"
);
@@ -1089,7 +1089,7 @@
#if defined(CONFIG_CMD_LOADB)
U_BOOT_CMD(
loadb, 3, 0, do_load_serial_bin,
- "loadb - load binary file over serial line (kermit mode)\n",
+ "load binary file over serial line (kermit mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
" with offset 'off' and baudrate 'baud'\n"
@@ -1097,7 +1097,7 @@
U_BOOT_CMD(
loady, 3, 0, do_load_serial_bin,
- "loady - load binary file over serial line (ymodem mode)\n",
+ "load binary file over serial line (ymodem mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
" with offset 'off' and baudrate 'baud'\n"
@@ -1129,7 +1129,7 @@
U_BOOT_CMD(
hwflow, 2, 0, do_hwflow,
- "hwflow - turn the harwdare flow control on/off\n",
+ "turn the harwdare flow control on/off",
"[on|off]\n - change RTS/CTS hardware flow control over serial line\n"
);
diff --git a/common/cmd_log.c b/common/cmd_log.c
index 6f8a27f..a03835d 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -252,7 +252,7 @@
U_BOOT_CMD(
log, 255, 1, do_log,
- "log - manipulate logbuffer\n",
+ "manipulate logbuffer",
"info - show pointer details\n"
"log reset - clear contents\n"
"log show - show contents\n"
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
index 4453299..cf601e4 100644
--- a/common/cmd_mac.c
+++ b/common/cmd_mac.c
@@ -28,7 +28,7 @@
U_BOOT_CMD(
mac, 3, 1, do_mac,
- "mac - display and program the system ID and MAC addresses in EEPROM\n",
+ "display and program the system ID and MAC addresses in EEPROM",
"[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n"
"read\n"
" - show content of EEPROM\n"
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index e2af030..a203e0d 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1214,39 +1214,39 @@
/**************************************************/
U_BOOT_CMD(
md, 3, 1, do_mem_md,
- "md - memory display\n",
+ "memory display",
"[.b, .w, .l] address [# of objects]\n - memory display\n"
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
+ "memory modify (auto-incrementing)",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
+ "memory modify (constant address)",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
+ "memory write (fill)",
"[.b, .w, .l] address value [count]\n - write memory\n"
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
+ "memory copy",
"[.b, .w, .l] source target count\n - copy memory\n"
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
+ "memory compare",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
@@ -1254,7 +1254,7 @@
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
@@ -1262,7 +1262,7 @@
U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area\n"
);
@@ -1271,14 +1271,14 @@
U_BOOT_CMD(
base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ "print or set address offset",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
+ "infinite loop on address range",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
@@ -1286,7 +1286,7 @@
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
+ "infinite write loop on address range",
"[.b, .w, .l] address number_of_objects data_to_write\n"
" - loop on a set of addresses\n"
);
@@ -1294,7 +1294,7 @@
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
+ "simple RAM test",
"[start [end [pattern [iterations]]]]\n"
" - simple RAM read/write test\n"
);
@@ -1302,13 +1302,13 @@
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
+ "memory display cyclic",
"[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
+ "memory write cyclic",
"[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
);
#endif /* CONFIG_MX_CYCLIC */
@@ -1316,7 +1316,7 @@
#ifdef CONFIG_CMD_UNZIP
U_BOOT_CMD(
unzip, 4, 1, do_unzip,
- "unzip - unzip a memory region\n",
+ "unzip a memory region",
"srcaddr dstaddr [dstsize]\n"
);
#endif /* CONFIG_CMD_UNZIP */
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index db2a994..6470bac 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -389,7 +389,7 @@
/***************************************************/
U_BOOT_CMD (frd, 3, 1, do_frd,
- "frd - read data from FSL\n",
+ "read data from FSL",
"- [fslnum [0|1|2|3]]\n"
" 0 - non blocking data read\n"
" 1 - non blocking control read\n"
@@ -398,7 +398,7 @@
U_BOOT_CMD (fwr, 4, 1, do_fwr,
- "fwr - write data to FSL\n",
+ "write data to FSL",
"- [fslnum [0|1|2|3]]\n"
" 0 - non blocking data write\n"
" 1 - non blocking control write\n"
@@ -406,7 +406,7 @@
" 3 - blocking control write\n");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "rspr - read/write special purpose register\n",
+ "read/write special purpose register",
"- reg_num [write value] read/write special purpose register\n"
" 1 - MSR - Machine status register\n"
" 3 - EAR - Exception address register\n"
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 19a7fbd..d70031a 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -453,7 +453,7 @@
U_BOOT_CMD(
mii, 5, 1, do_mii,
- "mii - MII utility commands\n",
+ "MII utility commands",
"device - list available devices\n"
"mii device <devname> - set current device\n"
"mii info <addr> - display MII PHY info\n"
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index c29f52b..024299a 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -55,14 +55,14 @@
U_BOOT_CMD(
irqinfo, 1, 1, do_irqinfo,
- "irqinfo - print information about IRQs\n",
+ "print information about IRQs",
NULL
);
#endif
U_BOOT_CMD(
sleep , 2, 1, do_sleep,
- "sleep - delay execution for some time\n",
+ "delay execution for some time",
"N\n"
" - delay execution for N seconds (N is _decimal_ !!!)\n"
);
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 25c9702..473825e 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -36,6 +36,6 @@
U_BOOT_CMD(
mmcinit, 1, 0, do_mmc,
- "mmcinit - init mmc card\n",
+ "init mmc card",
NULL
);
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index d8e3ab2..a0839c2 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -83,7 +83,7 @@
U_BOOT_CMD(
cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd,
- "cpu - Multiprocessor CPU boot manipulation and release\n",
+ "Multiprocessor CPU boot manipulation and release",
"<num> reset - Reset cpu <num>\n"
"cpu <num> status - Status of cpu <num>\n"
"cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]\n"
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 55d5466..11f9096 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -468,7 +468,7 @@
}
U_BOOT_CMD(nand, 5, 1, do_nand,
- "nand - NAND sub-system\n",
+ "NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read - addr off|partition size\n"
@@ -664,7 +664,7 @@
}
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
- "nboot - boot from NAND device\n",
+ "boot from NAND device",
"[partition] | [[[loadAddr] dev] offset]\n");
#endif
@@ -923,7 +923,7 @@
U_BOOT_CMD(
nand, 5, 1, do_nand,
- "nand - legacy NAND sub-system\n",
+ "legacy NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read[.jffs2[s]] addr off size\n"
@@ -1072,7 +1072,7 @@
U_BOOT_CMD(
nboot, 4, 1, do_nandboot,
- "nboot - boot from NAND device\n",
+ "boot from NAND device",
"loadAddr dev\n"
);
diff --git a/common/cmd_net.c b/common/cmd_net.c
index b627c38..a687849 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -39,7 +39,7 @@
U_BOOT_CMD(
bootp, 3, 1, do_bootp,
- "bootp\t- boot image via network using BOOTP/TFTP protocol\n",
+ "boot image via network using BOOTP/TFTP protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
@@ -50,7 +50,7 @@
U_BOOT_CMD(
tftpboot, 3, 1, do_tftpb,
- "tftpboot- boot image via network using TFTP protocol\n",
+ "boot image via network using TFTP protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
@@ -61,7 +61,7 @@
U_BOOT_CMD(
rarpboot, 3, 1, do_rarpb,
- "rarpboot- boot image via network using RARP/TFTP protocol\n",
+ "boot image via network using RARP/TFTP protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
@@ -73,7 +73,7 @@
U_BOOT_CMD(
dhcp, 3, 1, do_dhcp,
- "dhcp\t- boot image via network using DHCP/TFTP protocol\n",
+ "boot image via network using DHCP/TFTP protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
#endif
@@ -86,7 +86,7 @@
U_BOOT_CMD(
nfs, 3, 1, do_nfs,
- "nfs\t- boot image via network using NFS protocol\n",
+ "boot image via network using NFS protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
#endif
@@ -267,7 +267,7 @@
U_BOOT_CMD(
ping, 2, 1, do_ping,
- "ping\t- send ICMP ECHO_REQUEST to network host\n",
+ "send ICMP ECHO_REQUEST to network host",
"pingAddress\n"
);
#endif
@@ -311,7 +311,7 @@
U_BOOT_CMD(
cdp, 1, 1, do_cdp,
- "cdp\t- Perform CDP network configuration\n",
+ "Perform CDP network configuration",
);
#endif
@@ -348,7 +348,7 @@
U_BOOT_CMD(
sntp, 2, 1, do_sntp,
- "sntp\t- synchronize RTC via network\n",
+ "synchronize RTC via network",
"[NTP server IP]\n"
);
#endif
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index af40417..1fcb4c9 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -559,7 +559,7 @@
U_BOOT_CMD(
saveenv, 1, 0, do_saveenv,
- "saveenv - save environment variables to persistent storage\n",
+ "save environment variables to persistent storage",
NULL
);
@@ -590,7 +590,7 @@
U_BOOT_CMD(
printenv, CONFIG_SYS_MAXARGS, 1, do_printenv,
- "printenv- print environment variables\n",
+ "print environment variables",
"\n - print values of all environment variables\n"
"printenv name ...\n"
" - print value of environment variable 'name'\n"
@@ -598,7 +598,7 @@
U_BOOT_CMD(
setenv, CONFIG_SYS_MAXARGS, 0, do_setenv,
- "setenv - set environment variables\n",
+ "set environment variables",
"name value ...\n"
" - set environment variable 'name' to 'value ...'\n"
"setenv name\n"
@@ -609,7 +609,7 @@
U_BOOT_CMD(
askenv, CONFIG_SYS_MAXARGS, 1, do_askenv,
- "askenv - get environment variables from stdin\n",
+ "get environment variables from stdin",
"name [message] [size]\n"
" - get environment variable 'name' from stdin (max 'size' chars)\n"
"askenv name\n"
@@ -626,7 +626,7 @@
int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
run, CONFIG_SYS_MAXARGS, 1, do_run,
- "run - run commands in an environment variable\n",
+ "run commands in an environment variable",
"var [...]\n"
" - run the commands in the environment variable(s) 'var'\n"
);
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 6d43a77..5832ff8 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -471,7 +471,7 @@
U_BOOT_CMD(
onenand, 6, 1, do_onenand,
- "onenand - OneNAND sub-system\n",
+ "OneNAND sub-system",
"info - show available OneNAND devices\n"
"onenand bad - show bad blocks\n"
"onenand read[.oob] addr off size\n"
diff --git a/common/cmd_otp.c b/common/cmd_otp.c
index bdf2e6a..e27bb29 100644
--- a/common/cmd_otp.c
+++ b/common/cmd_otp.c
@@ -155,7 +155,7 @@
}
U_BOOT_CMD(otp, 6, 0, do_otp,
- "otp - One-Time-Programmable sub-system\n",
+ "One-Time-Programmable sub-system",
"read <addr> <page> [count] [half]\n"
"otp write [--force] <addr> <page> [count] [half]\n"
" - read/write 'count' half-pages starting at page 'page' (offset 'half')\n");
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 110415e..4a9317f 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -543,7 +543,7 @@
U_BOOT_CMD(
pci, 5, 1, do_pci,
- "pci - list and access PCI Configuration Space\n",
+ "list and access PCI Configuration Space",
"[bus] [long]\n"
" - short or long list of PCI devices on bus 'bus'\n"
"pci header b.d.f\n"
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 23fad3b..e448456 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -88,7 +88,7 @@
U_BOOT_CMD(
pinit, 2, 0, do_pinit,
- "pinit - PCMCIA sub-system\n",
+ "PCMCIA sub-system",
"on - power on PCMCIA socket\n"
"pinit off - power off PCMCIA socket\n"
);
diff --git a/common/cmd_portio.c b/common/cmd_portio.c
index b318ff0..41b1991 100644
--- a/common/cmd_portio.c
+++ b/common/cmd_portio.c
@@ -93,7 +93,7 @@
U_BOOT_CMD(
out, 3, 1, do_portio_out,
- "out - write datum to IO port\n",
+ "write datum to IO port",
"[.b, .w, .l] port value\n - output to IO port\n"
);
@@ -157,7 +157,7 @@
U_BOOT_CMD(
in, 2, 1, do_portio_in,
- "in - read data from an IO port\n",
+ "read data from an IO port",
"[.b, .w, .l] port\n"
" - read datum from IO port\n"
);
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 4c8e61a..0e28c05 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -382,6 +382,6 @@
#if defined(CONFIG_CMD_REGINFO)
U_BOOT_CMD(
reginfo, 2, 1, do_reginfo,
- "reginfo - print register information\n",
+ "print register information",
);
#endif
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index a2f2286..14e4bd4 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -102,7 +102,7 @@
U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
- "reiserls- list files in a directory (default /)\n",
+ "list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'\n"
);
@@ -232,7 +232,7 @@
U_BOOT_CMD(
reiserload, 6, 0, do_reiserload,
- "reiserload- load binary file from a Reiser filesystem\n",
+ "load binary file from a Reiser filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from dos filesystem\n"
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index 3380768..e849778 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -194,8 +194,8 @@
U_BOOT_CMD(
sata, 5, 1, do_sata,
- "sata - SATA sub system\n",
- "init - init SATA sub system\n"
+ "SATA sub system",
+ "sata init - init SATA sub system\n"
"sata info - show available SATA devices\n"
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index 8aae9fc..dd2c1ae 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -616,7 +616,7 @@
U_BOOT_CMD(
scsi, 5, 1, do_scsi,
- "scsi - SCSI sub-system\n",
+ "SCSI sub-system",
"reset - reset SCSI controller\n"
"scsi info - show available SCSI devices\n"
"scsi scan - (re-)scan SCSI bus\n"
@@ -628,6 +628,6 @@
U_BOOT_CMD(
scsiboot, 3, 1, do_scsiboot,
- "scsiboot- boot from SCSI device\n",
+ "boot from SCSI device",
"loadAddr dev:part\n"
);
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index 4125b18..9a5e720 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -63,7 +63,7 @@
U_BOOT_CMD(
setexpr, 5, 0, do_setexpr,
- "setexpr - set environment variable as the result of eval expression\n",
+ "set environment variable as the result of eval expression",
"name value1 <op> value2\n"
" - set environment variable 'name' to the result of the evaluated\n"
" express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 6dc522d..6a60b16 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -181,7 +181,7 @@
U_BOOT_CMD(
sf, 5, 1, do_spi_flash,
- "sf - SPI flash sub-system\n",
+ "SPI flash sub-system",
"probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n"
" and chip select\n"
"sf read addr offset len - read `len' bytes starting at\n"
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 1f0727b..746d14f 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -138,7 +138,7 @@
U_BOOT_CMD(
sspi, 5, 1, do_spi,
- "sspi - SPI utility commands\n",
+ "SPI utility commands",
"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
"<device> - Identifies the chip select of the device\n"
"<bit_len> - Number of bits to send (base 10)\n"
diff --git a/common/cmd_strings.c b/common/cmd_strings.c
index 6f0cbca..4517ba2 100644
--- a/common/cmd_strings.c
+++ b/common/cmd_strings.c
@@ -41,6 +41,6 @@
}
U_BOOT_CMD(strings, 3, 1, do_strings,
- "strings - display strings\n",
+ "display strings",
"<addr> [byte count]\n"
" - display strings at <addr> for at least [byte count] or first double NUL\n");
diff --git a/common/cmd_terminal.c b/common/cmd_terminal.c
index 67a2546..fd3dd48 100644
--- a/common/cmd_terminal.c
+++ b/common/cmd_terminal.c
@@ -87,6 +87,6 @@
U_BOOT_CMD(
terminal, 3, 1, do_terminal,
- "terminal - start terminal emulator\n",
+ "start terminal emulator",
""
);
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 305e2e1..b99fd58 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -600,7 +600,7 @@
}
U_BOOT_CMD(ubi, 6, 1, do_ubi,
- "ubi - ubi commands\n",
+ "ubi commands",
"part [nand|nor|onenand] [part]"
" - Show or set current partition\n"
"ubi info [l[ayout]]"
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index ea97782..bfb91b5 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -364,7 +364,7 @@
U_BOOT_CMD(
universe, 8, 1, do_universe,
- "universe- initialize and configure Turndra Universe\n",
+ "initialize and configure Turndra Universe",
"init\n"
" - initialize universe\n"
"universe vme [vme_addr] [pci_addr] [size] [vam] [pms]\n"
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 46d6eea..423a29f 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -666,7 +666,7 @@
#ifdef CONFIG_USB_STORAGE
U_BOOT_CMD(
usb, 5, 1, do_usb,
- "usb - USB sub-system\n",
+ "USB sub-system",
"reset - reset (rescan) USB controller\n"
"usb stop [f] - stop USB [f]=force stop\n"
"usb tree - show USB device tree\n"
@@ -682,14 +682,14 @@
U_BOOT_CMD(
usbboot, 3, 1, do_usbboot,
- "usbboot - boot from USB device\n",
+ "boot from USB device",
"loadAddr dev:part\n"
);
#else
U_BOOT_CMD(
usb, 5, 1, do_usb,
- "usb - USB sub-system\n",
+ "USB sub-system",
"reset - reset (rescan) USB controller\n"
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c
index ef4dd83..84d9530 100644
--- a/common/cmd_vfd.c
+++ b/common/cmd_vfd.c
@@ -67,7 +67,7 @@
U_BOOT_CMD(
vfd, 2, 0, do_vfd,
- "vfd - load a bitmap to the VFDs on TRAB\n",
+ "load a bitmap to the VFDs on TRAB",
"/N\n"
" - load bitmap N to the VFDs (N is _decimal_ !!!)\n"
"vfd ADDR\n"
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index 2753389..a45d248 100644
--- a/common/cmd_ximg.c
+++ b/common/cmd_ximg.c
@@ -180,7 +180,7 @@
}
U_BOOT_CMD(imxtract, 4, 1, do_imgextract,
- "imxtract- extract a part of a multi-image\n",
+ "extract a part of a multi-image",
"addr part [dest]\n"
" - extract <part> from legacy image at <addr> and copy to <dest>\n"
#if defined(CONFIG_FIT)
diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c
index 3732f7f..c47ea76 100644
--- a/common/cmd_yaffs2.c
+++ b/common/cmd_yaffs2.c
@@ -142,72 +142,72 @@
U_BOOT_CMD(
ymount, 3, 0, do_ymount,
- "ymount\t- mount yaffs\n",
+ "mount yaffs",
"\n"
);
U_BOOT_CMD(
yumount, 3, 0, do_yumount,
- "yumount\t- unmount yaffs\n",
+ "unmount yaffs",
"\n"
);
U_BOOT_CMD(
yls, 4, 0, do_yls,
- "yls\t- yaffs ls\n",
+ "yaffs ls",
"[-l] name\n"
);
U_BOOT_CMD(
yrd, 2, 0, do_yrd,
- "yrd\t- read file from yaffs\n",
+ "read file from yaffs",
"filename\n"
);
U_BOOT_CMD(
ywr, 4, 0, do_ywr,
- "ywr\t- write file to yaffs\n",
+ "write file to yaffs",
"filename value num_vlues\n"
);
U_BOOT_CMD(
yrdm, 3, 0, do_yrdm,
- "yrdm\t- read file to memory from yaffs\n",
+ "read file to memory from yaffs",
"filename offset\n"
);
U_BOOT_CMD(
ywrm, 4, 0, do_ywrm,
- "ywrm\t- write file from memory to yaffs\n",
+ "write file from memory to yaffs",
"filename offset size\n"
);
U_BOOT_CMD(
ymkdir, 2, 0, do_ymkdir,
- "ymkdir\t- YAFFS mkdir\n",
+ "YAFFS mkdir",
"dirname\n"
);
U_BOOT_CMD(
yrmdir, 2, 0, do_yrmdir,
- "yrmdir\t- YAFFS rmdir\n",
+ "YAFFS rmdir",
"dirname\n"
);
U_BOOT_CMD(
yrm, 2, 0, do_yrm,
- "yrm\t- YAFFS rm\n",
+ "YAFFS rm",
"path\n"
);
U_BOOT_CMD(
ymv, 4, 0, do_ymv,
- "ymv\t- YAFFS mv\n",
+ "YAFFS mv",
"oldPath newPath\n"
);
U_BOOT_CMD(
ydump, 2, 0, do_ydump,
- "ydump\t- YAFFS device struct\n",
+ "YAFFS device struct",
"dirname\n"
);
diff --git a/common/command.c b/common/command.c
index c396648..3b9ccc9 100644
--- a/common/command.c
+++ b/common/command.c
@@ -38,7 +38,7 @@
U_BOOT_CMD(
version, 1, 1, do_version,
- "version - print monitor version\n",
+ "print monitor version",
NULL
);
@@ -71,7 +71,7 @@
U_BOOT_CMD(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
- "echo - echo args to console\n",
+ "echo args to console",
"[args..]\n"
" - echo args to console; \\c suppresses newline\n"
);
@@ -203,7 +203,7 @@
U_BOOT_CMD(
test, CONFIG_SYS_MAXARGS, 1, do_test,
- "test - minimal test like /bin/sh\n",
+ "minimal test like /bin/sh",
"[args..]\n"
" - test functionality\n"
);
@@ -222,7 +222,7 @@
U_BOOT_CMD(
exit, 2, 1, do_exit,
- "exit - exit script\n",
+ "exit script",
" - exit functionality\n"
);
@@ -277,7 +277,8 @@
return 1;
if (usage == NULL)
continue;
- puts (usage);
+ printf("%-*s- %s\n", CONFIG_SYS_HELP_CMD_WIDTH,
+ cmd_array[i]->name, usage);
}
return 0;
}
@@ -299,7 +300,7 @@
putc ('\n');
#else /* no long help available */
if (cmdtp->usage)
- puts (cmdtp->usage);
+ printf ("%s - %s\n", cmdtp->name, cmdtp->usage);
#endif /* CONFIG_SYS_LONGHELP */
} else {
printf ("Unknown command '%s' - try 'help'"
@@ -315,7 +316,7 @@
U_BOOT_CMD(
help, CONFIG_SYS_MAXARGS, 1, do_help,
- "help - print online help\n",
+ "print online help",
"[command ...]\n"
" - show help information (for 'command')\n"
"'help' prints online help for the monitor commands.\n\n"
@@ -328,13 +329,13 @@
#ifdef CONFIG_SYS_LONGHELP
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
- "? - alias for 'help'\n",
+ "alias for 'help'",
NULL
};
#else
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
- "? - alias for 'help'\n"
+ "alias for 'help'"
};
#endif /* CONFIG_SYS_LONGHELP */
@@ -381,7 +382,7 @@
void cmd_usage(cmd_tbl_t *cmdtp)
{
- printf("Usage:\n%s\n", cmdtp->usage);
+ printf("Usage:\n%s - %s\n\n", cmdtp->name, cmdtp->usage);
}
#ifdef CONFIG_AUTO_COMPLETE
diff --git a/common/hush.c b/common/hush.c
index dbb4035..01b74d7 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -3625,7 +3625,7 @@
U_BOOT_CMD(
showvar, CONFIG_SYS_MAXARGS, 1, do_showvar,
- "showvar- print local hushshell variables\n",
+ "print local hushshell variables",
"\n - print values of all hushshell variables\n"
"showvar name ...\n"
" - print value of hushshell variable 'name'\n"
diff --git a/common/kgdb.c b/common/kgdb.c
index adc15dd..888b96b 100644
--- a/common/kgdb.c
+++ b/common/kgdb.c
@@ -575,7 +575,7 @@
U_BOOT_CMD(
kgdb, CONFIG_SYS_MAXARGS, 1, do_kgdb,
- "kgdb - enter gdb remote debug mode\n",
+ "enter gdb remote debug mode",
"[arg0 arg1 .. argN]\n"
" - executes a breakpoint so that kgdb mode is\n"
" entered via the exception handler. To return\n"
diff --git a/common/lcd.c b/common/lcd.c
index ae79051..5f73247 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -426,7 +426,7 @@
U_BOOT_CMD(
cls, 1, 1, lcd_clear,
- "cls - clear screen\n",
+ "clear screen",
NULL
);
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
index 542bf21..5992111 100644
--- a/cpu/mpc512x/speed.c
+++ b/cpu/mpc512x/speed.c
@@ -137,7 +137,7 @@
}
U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "clocks - print clock configuration\n",
+ "print clock configuration",
" clocks\n"
);
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
index 47c8937..f3942b4 100644
--- a/cpu/mpc83xx/ecc.c
+++ b/cpu/mpc83xx/ecc.c
@@ -355,7 +355,7 @@
}
U_BOOT_CMD(ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
+ "support for DDR ECC features",
"status - print out status info\n"
"ecc captureclear - clear capture regs data\n"
"ecc sbecnt <val> - set Single-Bit Error counter\n"
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 4230099..9b7e7b5 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -544,6 +544,6 @@
}
U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "clocks - print clock configuration\n",
+ "print clock configuration",
" clocks\n"
);
diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c
index afd5d83..251204b 100644
--- a/cpu/nios2/sysid.c
+++ b/cpu/nios2/sysid.c
@@ -52,7 +52,7 @@
U_BOOT_CMD(
sysid, 1, 1, do_sysid,
- "sysid - display Nios-II system id\n\n",
+ "display Nios-II system id",
"\n - display Nios-II system id\n"
);
#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index f80baeb..1c5e314 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -209,7 +209,7 @@
U_BOOT_CMD(
pca953x, 5, 1, do_pca953x,
- "pca953x - pca953x gpio access\n",
+ "pca953x gpio access",
"device [dev]\n"
" - show or set current device address\n"
#ifdef CONFIG_CMD_PCA953X_INFO
diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index 958ff68..8b5fbbc 100644
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -390,7 +390,7 @@
U_BOOT_CMD(
ds4510, 6, 1, do_ds4510,
- "ds4510 - ds4510 eeprom/seeprom/sram/gpio access\n",
+ "ds4510 eeprom/seeprom/sram/gpio access",
"device [dev]\n"
" - show or set current device address\n"
#ifdef CONFIG_CMD_DS4510_INFO
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 7b29fd7..e90a4a5 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -461,7 +461,7 @@
U_BOOT_CMD(
qe, 4, 0, qe_cmd,
- "qe - QUICC Engine commands\n",
+ "QUICC Engine commands",
"fw <addr> [<length>] - Upload firmware binary at address <addr> to "
"the QE,\n\twith optional length <length> verification.\n"
);
diff --git a/include/command.h b/include/command.h
index 58992e9..d7321af 100644
--- a/include/command.h
+++ b/include/command.h
@@ -33,6 +33,11 @@
#define NULL 0
#endif
+/* Default to a width of 8 characters for help message command width */
+#ifndef CONFIG_SYS_HELP_CMD_WIDTH
+#define CONFIG_SYS_HELP_CMD_WIDTH 8
+#endif
+
#ifndef __ASSEMBLY__
/*
* Monitor Command Table