include/usb_defs.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2001
  * Denis Peter, MPL AG Switzerland
  *
  * Note: Part of this code has been derived from linux
  */
 #ifndef _USB_DEFS_H_
 #define _USB_DEFS_H_

 /* USB constants */

 /* Device and/or Interface Class codes */
 #define USB_CLASS_PER_INTERFACE  0	/* for DeviceClass */
 #define USB_CLASS_AUDIO          1
 #define USB_CLASS_COMM           2
 #define USB_CLASS_HID            3
 #define USB_CLASS_PRINTER	       7
 #define USB_CLASS_MASS_STORAGE   8
 #define USB_CLASS_HUB            9
 #define USB_CLASS_DATA           10
 #define USB_CLASS_VENDOR_SPEC    0xff

 /* some HID sub classes */
 #define USB_SUB_HID_NONE        0
 #define USB_SUB_HID_BOOT        1

 /* some UID Protocols */
 #define USB_PROT_HID_NONE       0
 #define USB_PROT_HID_KEYBOARD   1
 #define USB_PROT_HID_MOUSE      2

 /* Sub STORAGE Classes */
 #define US_SC_RBC              1		/* Typically, flash devices */
 #define US_SC_8020             2		/* CD-ROM */
 #define US_SC_QIC              3		/* QIC-157 Tapes */
 #define US_SC_UFI              4		/* Floppy */
 #define US_SC_8070             5		/* Removable media */
 #define US_SC_SCSI             6		/* Transparent */
 #define US_SC_MIN              US_SC_RBC
 #define US_SC_MAX              US_SC_SCSI

 /* STORAGE Protocols */
 #define US_PR_CB               1		/* Control/Bulk w/o interrupt */
 #define US_PR_CBI              0		/* Control/Bulk/Interrupt */
 #define US_PR_BULK             0x50		/* bulk only */

 /* USB types */
 #define USB_TYPE_STANDARD   (0x00 << 5)
 #define USB_TYPE_CLASS      (0x01 << 5)
 #define USB_TYPE_VENDOR     (0x02 << 5)
 #define USB_TYPE_RESERVED   (0x03 << 5)

 /* USB recipients */
 #define USB_RECIP_DEVICE      0x00
 #define USB_RECIP_INTERFACE   0x01
 #define USB_RECIP_ENDPOINT    0x02
 #define USB_RECIP_OTHER       0x03

 /* USB directions */
 #define USB_DIR_OUT           0
 #define USB_DIR_IN            0x80

 /*
  * bmRequestType: USB Device Requests, table 9.2 USB 2.0 spec.
  * (shifted) direction/type/recipient.
  */
 #define DeviceRequest \
 	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)

 #define DeviceOutRequest \
 	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8)

 #define InterfaceRequest \
 	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)

 #define EndpointRequest \
 	((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)

 #define EndpointOutRequest \
 	((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)

 /* class requests from the USB 2.0 hub spec, table 11-15 */
 #define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
 /* GetBusState and SetHubDescriptor are optional, omitted */
 #define ClearHubFeature		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
 					      USB_REQ_CLEAR_FEATURE)
 #define ClearPortFeature	HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
 					      USB_REQ_CLEAR_FEATURE)
 #define GetHubDescriptor	HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
 					      USB_REQ_GET_DESCRIPTOR)
 #define GetHubStatus		HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
 					      USB_REQ_GET_STATUS)
 #define GetPortStatus		HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
 					      USB_REQ_GET_STATUS)
 #define SetHubFeature		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
 					      USB_REQ_SET_FEATURE)
 #define SetPortFeature		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
 					      USB_REQ_SET_FEATURE)
 #define ClearTTBuffer		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
 					      HUB_CLEAR_TT_BUFFER)
 #define ResetTT			HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
 					      HUB_RESET_TT)
 #define GetTTState		HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
 					      HUB_GET_TT_STATE)
 #define StopTT			HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
 					      HUB_STOP_TT)

 /* Descriptor types */
 #define USB_DT_DEVICE        0x01
 #define USB_DT_CONFIG        0x02
 #define USB_DT_STRING        0x03
 #define USB_DT_INTERFACE     0x04
 #define USB_DT_ENDPOINT      0x05

 #define USB_DT_HID          (USB_TYPE_CLASS | 0x01)
 #define USB_DT_REPORT       (USB_TYPE_CLASS | 0x02)
 #define USB_DT_PHYSICAL     (USB_TYPE_CLASS | 0x03)
 #define USB_DT_HUB          (USB_TYPE_CLASS | 0x09)
 #define USB_DT_SS_HUB       (USB_TYPE_CLASS | 0x0a)

 /* Descriptor sizes per descriptor type */
 #define USB_DT_DEVICE_SIZE      18
 #define USB_DT_CONFIG_SIZE      9
 #define USB_DT_INTERFACE_SIZE   9
 #define USB_DT_ENDPOINT_SIZE    7
 #define USB_DT_ENDPOINT_AUDIO_SIZE  9	/* Audio extension */
 #define USB_DT_HUB_NONVAR_SIZE  7
 #define USB_DT_HID_SIZE         9

 /* Endpoints */
 #define USB_ENDPOINT_NUMBER_MASK  0x0f	/* in bEndpointAddress */
 #define USB_ENDPOINT_DIR_MASK     0x80

 #define USB_ENDPOINT_XFERTYPE_MASK 0x03	/* in bmAttributes */
 #define USB_ENDPOINT_XFER_CONTROL  0
 #define USB_ENDPOINT_XFER_ISOC     1
 #define USB_ENDPOINT_XFER_BULK     2
 #define USB_ENDPOINT_XFER_INT      3

 /* USB Packet IDs (PIDs) */
 #define USB_PID_UNDEF_0             0xf0
 #define USB_PID_OUT                 0xe1
 #define USB_PID_ACK                 0xd2
 #define USB_PID_DATA0               0xc3
 #define USB_PID_UNDEF_4             0xb4
 #define USB_PID_SOF                 0xa5
 #define USB_PID_UNDEF_6             0x96
 #define USB_PID_UNDEF_7             0x87
 #define USB_PID_UNDEF_8             0x78
 #define USB_PID_IN                  0x69
 #define USB_PID_NAK                 0x5a
 #define USB_PID_DATA1               0x4b
 #define USB_PID_PREAMBLE            0x3c
 #define USB_PID_SETUP               0x2d
 #define USB_PID_STALL               0x1e
 #define USB_PID_UNDEF_F             0x0f

 /* Standard requests */
 #define USB_REQ_GET_STATUS          0x00
 #define USB_REQ_CLEAR_FEATURE       0x01
 #define USB_REQ_SET_FEATURE         0x03
 #define USB_REQ_SET_ADDRESS         0x05
 #define USB_REQ_GET_DESCRIPTOR      0x06
 #define USB_REQ_SET_DESCRIPTOR      0x07
 #define USB_REQ_GET_CONFIGURATION   0x08
 #define USB_REQ_SET_CONFIGURATION   0x09
 #define USB_REQ_GET_INTERFACE       0x0A
 #define USB_REQ_SET_INTERFACE       0x0B
 #define USB_REQ_SYNCH_FRAME         0x0C

 /* HID requests */
 #define USB_REQ_GET_REPORT          0x01
 #define USB_REQ_GET_IDLE            0x02
 #define USB_REQ_GET_PROTOCOL        0x03
 #define USB_REQ_SET_REPORT          0x09
 #define USB_REQ_SET_IDLE            0x0A
 #define USB_REQ_SET_PROTOCOL        0x0B

 /* Device features */
 #define USB_FEAT_HALT               0x00
 #define USB_FEAT_WAKEUP             0x01
 #define USB_FEAT_TEST               0x02

 /* Test modes */
 #define USB_TEST_MODE_J             0x01
 #define USB_TEST_MODE_K             0x02
 #define USB_TEST_MODE_SE0_NAK       0x03
 #define USB_TEST_MODE_PACKET        0x04
 #define USB_TEST_MODE_FORCE_ENABLE  0x05

 /*
  * "pipe" definitions, use unsigned so we can compare reliably, since this
  * value is shifted up to bits 30/31.
  */
 #define PIPE_ISOCHRONOUS    0U
 #define PIPE_INTERRUPT      1U
 #define PIPE_CONTROL        2U
 #define PIPE_BULK           3U
 #define PIPE_DEVEP_MASK     0x0007ff00

 #define USB_ISOCHRONOUS    0
 #define USB_INTERRUPT      1
 #define USB_CONTROL        2
 #define USB_BULK           3

 #define USB_PIPE_TYPE_SHIFT	30
 #define USB_PIPE_TYPE_MASK	(3 << USB_PIPE_TYPE_SHIFT)

 #define USB_PIPE_DEV_SHIFT	8
 #define USB_PIPE_DEV_MASK	(0x7f << USB_PIPE_DEV_SHIFT)

 #define USB_PIPE_EP_SHIFT	15
 #define USB_PIPE_EP_MASK	(0xf << USB_PIPE_EP_SHIFT)

 /* USB-status codes: */
 #define USB_ST_ACTIVE           0x1		/* TD is active */
 #define USB_ST_STALLED          0x2		/* TD is stalled */
 #define USB_ST_BUF_ERR          0x4		/* buffer error */
 #define USB_ST_BABBLE_DET       0x8		/* Babble detected */
 #define USB_ST_NAK_REC          0x10	/* NAK Received*/
 #define USB_ST_CRC_ERR          0x20	/* CRC/timeout Error */
 #define USB_ST_BIT_ERR          0x40	/* Bitstuff error */
 #define USB_ST_NOT_PROC         0x80000000L	/* Not yet processed */

 /*************************************************************************
  * Hub defines
  */

 /*
  * Hub request types
  */

 #define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
 #define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)

 /*
  * Hub Class feature numbers
  */
 #define C_HUB_LOCAL_POWER   0
 #define C_HUB_OVER_CURRENT  1

 /*
  * Port feature numbers
  */
 #define USB_PORT_FEAT_CONNECTION     0
 #define USB_PORT_FEAT_ENABLE         1
 #define USB_PORT_FEAT_SUSPEND        2
 #define USB_PORT_FEAT_OVER_CURRENT   3
 #define USB_PORT_FEAT_RESET          4
 #define USB_PORT_FEAT_POWER          8
 #define USB_PORT_FEAT_LOWSPEED       9
 #define USB_PORT_FEAT_HIGHSPEED      10
 #define USB_PORT_FEAT_C_CONNECTION   16
 #define USB_PORT_FEAT_C_ENABLE       17
 #define USB_PORT_FEAT_C_SUSPEND      18
 #define USB_PORT_FEAT_C_OVER_CURRENT 19
 #define USB_PORT_FEAT_C_RESET        20
 #define USB_PORT_FEAT_TEST           21

 /*
  * Changes to Port feature numbers for Super speed,
  * from USB 3.0 spec Table 10-8
  */
 #define USB_SS_PORT_FEAT_U1_TIMEOUT	23
 #define USB_SS_PORT_FEAT_U2_TIMEOUT	24
 #define USB_SS_PORT_FEAT_C_LINK_STATE	25
 #define USB_SS_PORT_FEAT_C_CONFIG_ERROR	26
 #define USB_SS_PORT_FEAT_BH_RESET	28
 #define USB_SS_PORT_FEAT_C_BH_RESET	29

 /* wPortStatus bits */
 #define USB_PORT_STAT_CONNECTION    0x0001
 #define USB_PORT_STAT_ENABLE        0x0002
 #define USB_PORT_STAT_SUSPEND       0x0004
 #define USB_PORT_STAT_OVERCURRENT   0x0008
 #define USB_PORT_STAT_RESET         0x0010
 #define USB_PORT_STAT_POWER         0x0100
 #define USB_PORT_STAT_LOW_SPEED     0x0200
 #define USB_PORT_STAT_HIGH_SPEED    0x0400	/* support for EHCI */
 #define USB_PORT_STAT_SUPER_SPEED   0x0600	/* faking support to XHCI */
 #define USB_PORT_STAT_SPEED_MASK	\
 	(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)

 /*
  * Changes to wPortStatus bit field in USB 3.0
  * See USB 3.0 spec Table 10-10
  */
 #define USB_SS_PORT_STAT_LINK_STATE	0x01e0
 #define USB_SS_PORT_STAT_POWER		0x0200
 #define USB_SS_PORT_STAT_SPEED		0x1c00
 #define USB_SS_PORT_STAT_SPEED_5GBPS	0x0000
 /* Bits that are the same from USB 2.0 */
 #define USB_SS_PORT_STAT_MASK		(USB_PORT_STAT_CONNECTION | \
 					 USB_PORT_STAT_ENABLE | \
 					 USB_PORT_STAT_OVERCURRENT | \
 					 USB_PORT_STAT_RESET)

 /* wPortChange bits */
 #define USB_PORT_STAT_C_CONNECTION  0x0001
 #define USB_PORT_STAT_C_ENABLE      0x0002
 #define USB_PORT_STAT_C_SUSPEND     0x0004
 #define USB_PORT_STAT_C_OVERCURRENT 0x0008
 #define USB_PORT_STAT_C_RESET       0x0010

 /*
  * Changes to wPortChange bit fields in USB 3.0
  * See USB 3.0 spec Table 10-12
  */
 #define USB_SS_PORT_STAT_C_BH_RESET	0x0020
 #define USB_SS_PORT_STAT_C_LINK_STATE	0x0040
 #define USB_SS_PORT_STAT_C_CONFIG_ERROR	0x0080

 /* wHubCharacteristics (masks) */
 #define HUB_CHAR_COMMON_OCPM        0x0000 /* All ports Over-Current reporting */
 #define HUB_CHAR_INDV_PORT_LPSM     0x0001 /* per-port power control */
 #define HUB_CHAR_NO_LPSM            0x0002 /* no power switching */
 #define HUB_CHAR_LPSM               0x0003
 #define HUB_CHAR_COMPOUND           0x0004
 #define HUB_CHAR_INDV_PORT_OCPM     0x0008 /* per-port Over-current reporting */
 #define HUB_CHAR_NO_OCPM            0x0010 /* No Over-current Protection support */
 #define HUB_CHAR_OCPM               0x0018
 #define HUB_CHAR_TTTT               0x0060 /* TT Think Time mask */
 #define HUB_CHAR_PORTIND            0x0080 /* per-port indicators (LEDs) */

 /*
  * Hub Status & Hub Change bit masks
  */
 #define HUB_STATUS_LOCAL_POWER	0x0001
 #define HUB_STATUS_OVERCURRENT	0x0002

 #define HUB_CHANGE_LOCAL_POWER	0x0001
 #define HUB_CHANGE_OVERCURRENT	0x0002

 /* Mask for wIndex in get/set port feature */
 #define USB_HUB_PORT_MASK	0xf

 /* Hub class request codes */
 #define USB_REQ_SET_HUB_DEPTH	0x0c

 /*
  * As of USB 2.0, full/low speed devices are segregated into trees.
  * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
  * The other type grows from high speed hubs when they connect to
  * full/low speed devices using "Transaction Translators" (TTs).
  */
 struct usb_tt {
 	bool		multi;		/* true means one TT per port */
 	unsigned	think_time;	/* think time in ns */
 };

 /*
  * CBI style
  */

 #define US_CBI_ADSC		0

 /* Command Block Wrapper */
 struct umass_bbb_cbw {
 	__u32		dCBWSignature;
 #	define CBWSIGNATURE	0x43425355
 	__u32		dCBWTag;
 	__u32		dCBWDataTransferLength;
 	__u8		bCBWFlags;
 #	define CBWFLAGS_OUT	0x00
 #	define CBWFLAGS_IN	0x80
 #	define CBWFLAGS_SBZ	0x7f
 	__u8		bCBWLUN;
 	__u8		bCDBLength;
 #	define CBWCDBLENGTH	16
 	__u8		CBWCDB[CBWCDBLENGTH];
 };
 #define UMASS_BBB_CBW_SIZE	31

 /* Command Status Wrapper */
 struct umass_bbb_csw {
 	__u32		dCSWSignature;
 #	define CSWSIGNATURE	0x53425355
 	__u32		dCSWTag;
 	__u32		dCSWDataResidue;
 	__u8		bCSWStatus;
 #	define CSWSTATUS_GOOD	0x0
 #	define CSWSTATUS_FAILED 0x1
 #	define CSWSTATUS_PHASE	0x2
 };
 #define UMASS_BBB_CSW_SIZE	13

 /*
  * BULK only
  */
 #define US_BBB_RESET		0xff
 #define US_BBB_GET_MAX_LUN	0xfe

 #endif /*_USB_DEFS_H_ */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* (C) Copyright 2001
	* Denis Peter, MPL AG Switzerland
	*
	* Note: Part of this code has been derived from linux
	*/
	#ifndef _USB_DEFS_H_
	#define _USB_DEFS_H_

	/* USB constants */

	/* Device and/or Interface Class codes */
	#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
	#define USB_CLASS_AUDIO 1
	#define USB_CLASS_COMM 2
	#define USB_CLASS_HID 3
	#define USB_CLASS_PRINTER 7
	#define USB_CLASS_MASS_STORAGE 8
	#define USB_CLASS_HUB 9
	#define USB_CLASS_DATA 10
	#define USB_CLASS_VENDOR_SPEC 0xff

	/* some HID sub classes */
	#define USB_SUB_HID_NONE 0
	#define USB_SUB_HID_BOOT 1

	/* some UID Protocols */
	#define USB_PROT_HID_NONE 0
	#define USB_PROT_HID_KEYBOARD 1
	#define USB_PROT_HID_MOUSE 2

	/* Sub STORAGE Classes */
	#define US_SC_RBC 1 /* Typically, flash devices */
	#define US_SC_8020 2 /* CD-ROM */
	#define US_SC_QIC 3 /* QIC-157 Tapes */
	#define US_SC_UFI 4 /* Floppy */
	#define US_SC_8070 5 /* Removable media */
	#define US_SC_SCSI 6 /* Transparent */
	#define US_SC_MIN US_SC_RBC
	#define US_SC_MAX US_SC_SCSI

	/* STORAGE Protocols */
	#define US_PR_CB 1 /* Control/Bulk w/o interrupt */
	#define US_PR_CBI 0 /* Control/Bulk/Interrupt */
	#define US_PR_BULK 0x50 /* bulk only */

	/* USB types */
	#define USB_TYPE_STANDARD (0x00 << 5)
	#define USB_TYPE_CLASS (0x01 << 5)
	#define USB_TYPE_VENDOR (0x02 << 5)
	#define USB_TYPE_RESERVED (0x03 << 5)

	/* USB recipients */
	#define USB_RECIP_DEVICE 0x00
	#define USB_RECIP_INTERFACE 0x01
	#define USB_RECIP_ENDPOINT 0x02
	#define USB_RECIP_OTHER 0x03

	/* USB directions */
	#define USB_DIR_OUT 0
	#define USB_DIR_IN 0x80

	/*
	* bmRequestType: USB Device Requests, table 9.2 USB 2.0 spec.
	* (shifted) direction/type/recipient.
	*/
	#define DeviceRequest \
	((USB_DIR_IN \| USB_TYPE_STANDARD \| USB_RECIP_DEVICE) << 8)

	#define DeviceOutRequest \
	((USB_DIR_OUT \| USB_TYPE_STANDARD \| USB_RECIP_DEVICE) << 8)

	#define InterfaceRequest \
	((USB_DIR_IN \| USB_TYPE_STANDARD \| USB_RECIP_INTERFACE) << 8)

	#define EndpointRequest \
	((USB_DIR_IN \| USB_TYPE_STANDARD \| USB_RECIP_INTERFACE) << 8)

	#define EndpointOutRequest \
	((USB_DIR_OUT \| USB_TYPE_STANDARD \| USB_RECIP_INTERFACE) << 8)

	/* class requests from the USB 2.0 hub spec, table 11-15 */
	#define HUB_CLASS_REQ(dir, type, request) ((((dir) \| (type)) << 8) \| (request))
	/* GetBusState and SetHubDescriptor are optional, omitted */
	#define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
	USB_REQ_CLEAR_FEATURE)
	#define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
	USB_REQ_CLEAR_FEATURE)
	#define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
	USB_REQ_GET_DESCRIPTOR)
	#define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
	USB_REQ_GET_STATUS)
	#define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
	USB_REQ_GET_STATUS)
	#define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
	USB_REQ_SET_FEATURE)
	#define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
	USB_REQ_SET_FEATURE)
	#define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
	HUB_CLEAR_TT_BUFFER)
	#define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
	HUB_RESET_TT)
	#define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
	HUB_GET_TT_STATE)
	#define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
	HUB_STOP_TT)

	/* Descriptor types */
	#define USB_DT_DEVICE 0x01
	#define USB_DT_CONFIG 0x02
	#define USB_DT_STRING 0x03
	#define USB_DT_INTERFACE 0x04
	#define USB_DT_ENDPOINT 0x05

	#define USB_DT_HID (USB_TYPE_CLASS \| 0x01)
	#define USB_DT_REPORT (USB_TYPE_CLASS \| 0x02)
	#define USB_DT_PHYSICAL (USB_TYPE_CLASS \| 0x03)
	#define USB_DT_HUB (USB_TYPE_CLASS \| 0x09)
	#define USB_DT_SS_HUB (USB_TYPE_CLASS \| 0x0a)

	/* Descriptor sizes per descriptor type */
	#define USB_DT_DEVICE_SIZE 18
	#define USB_DT_CONFIG_SIZE 9
	#define USB_DT_INTERFACE_SIZE 9
	#define USB_DT_ENDPOINT_SIZE 7
	#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
	#define USB_DT_HUB_NONVAR_SIZE 7
	#define USB_DT_HID_SIZE 9

	/* Endpoints */
	#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
	#define USB_ENDPOINT_DIR_MASK 0x80

	#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
	#define USB_ENDPOINT_XFER_CONTROL 0
	#define USB_ENDPOINT_XFER_ISOC 1
	#define USB_ENDPOINT_XFER_BULK 2
	#define USB_ENDPOINT_XFER_INT 3

	/* USB Packet IDs (PIDs) */
	#define USB_PID_UNDEF_0 0xf0
	#define USB_PID_OUT 0xe1
	#define USB_PID_ACK 0xd2
	#define USB_PID_DATA0 0xc3
	#define USB_PID_UNDEF_4 0xb4
	#define USB_PID_SOF 0xa5
	#define USB_PID_UNDEF_6 0x96
	#define USB_PID_UNDEF_7 0x87
	#define USB_PID_UNDEF_8 0x78
	#define USB_PID_IN 0x69
	#define USB_PID_NAK 0x5a
	#define USB_PID_DATA1 0x4b
	#define USB_PID_PREAMBLE 0x3c
	#define USB_PID_SETUP 0x2d
	#define USB_PID_STALL 0x1e
	#define USB_PID_UNDEF_F 0x0f

	/* Standard requests */
	#define USB_REQ_GET_STATUS 0x00
	#define USB_REQ_CLEAR_FEATURE 0x01
	#define USB_REQ_SET_FEATURE 0x03
	#define USB_REQ_SET_ADDRESS 0x05
	#define USB_REQ_GET_DESCRIPTOR 0x06
	#define USB_REQ_SET_DESCRIPTOR 0x07
	#define USB_REQ_GET_CONFIGURATION 0x08
	#define USB_REQ_SET_CONFIGURATION 0x09
	#define USB_REQ_GET_INTERFACE 0x0A
	#define USB_REQ_SET_INTERFACE 0x0B
	#define USB_REQ_SYNCH_FRAME 0x0C

	/* HID requests */
	#define USB_REQ_GET_REPORT 0x01
	#define USB_REQ_GET_IDLE 0x02
	#define USB_REQ_GET_PROTOCOL 0x03
	#define USB_REQ_SET_REPORT 0x09
	#define USB_REQ_SET_IDLE 0x0A
	#define USB_REQ_SET_PROTOCOL 0x0B

	/* Device features */
	#define USB_FEAT_HALT 0x00
	#define USB_FEAT_WAKEUP 0x01
	#define USB_FEAT_TEST 0x02

	/* Test modes */
	#define USB_TEST_MODE_J 0x01
	#define USB_TEST_MODE_K 0x02
	#define USB_TEST_MODE_SE0_NAK 0x03
	#define USB_TEST_MODE_PACKET 0x04
	#define USB_TEST_MODE_FORCE_ENABLE 0x05

	/*
	* "pipe" definitions, use unsigned so we can compare reliably, since this
	* value is shifted up to bits 30/31.
	*/
	#define PIPE_ISOCHRONOUS 0U
	#define PIPE_INTERRUPT 1U
	#define PIPE_CONTROL 2U
	#define PIPE_BULK 3U
	#define PIPE_DEVEP_MASK 0x0007ff00

	#define USB_ISOCHRONOUS 0
	#define USB_INTERRUPT 1
	#define USB_CONTROL 2
	#define USB_BULK 3

	#define USB_PIPE_TYPE_SHIFT 30
	#define USB_PIPE_TYPE_MASK (3 << USB_PIPE_TYPE_SHIFT)

	#define USB_PIPE_DEV_SHIFT 8
	#define USB_PIPE_DEV_MASK (0x7f << USB_PIPE_DEV_SHIFT)

	#define USB_PIPE_EP_SHIFT 15
	#define USB_PIPE_EP_MASK (0xf << USB_PIPE_EP_SHIFT)

	/* USB-status codes: */
	#define USB_ST_ACTIVE 0x1 /* TD is active */
	#define USB_ST_STALLED 0x2 /* TD is stalled */
	#define USB_ST_BUF_ERR 0x4 /* buffer error */
	#define USB_ST_BABBLE_DET 0x8 /* Babble detected */
	#define USB_ST_NAK_REC 0x10 /* NAK Received*/
	#define USB_ST_CRC_ERR 0x20 /* CRC/timeout Error */
	#define USB_ST_BIT_ERR 0x40 /* Bitstuff error */
	#define USB_ST_NOT_PROC 0x80000000L /* Not yet processed */

	/*************************************************************************
	* Hub defines
	*/

	/*
	* Hub request types
	*/

	#define USB_RT_HUB (USB_TYPE_CLASS \| USB_RECIP_DEVICE)
	#define USB_RT_PORT (USB_TYPE_CLASS \| USB_RECIP_OTHER)

	/*
	* Hub Class feature numbers
	*/
	#define C_HUB_LOCAL_POWER 0
	#define C_HUB_OVER_CURRENT 1

	/*
	* Port feature numbers
	*/
	#define USB_PORT_FEAT_CONNECTION 0
	#define USB_PORT_FEAT_ENABLE 1
	#define USB_PORT_FEAT_SUSPEND 2
	#define USB_PORT_FEAT_OVER_CURRENT 3
	#define USB_PORT_FEAT_RESET 4
	#define USB_PORT_FEAT_POWER 8
	#define USB_PORT_FEAT_LOWSPEED 9
	#define USB_PORT_FEAT_HIGHSPEED 10
	#define USB_PORT_FEAT_C_CONNECTION 16
	#define USB_PORT_FEAT_C_ENABLE 17
	#define USB_PORT_FEAT_C_SUSPEND 18
	#define USB_PORT_FEAT_C_OVER_CURRENT 19
	#define USB_PORT_FEAT_C_RESET 20
	#define USB_PORT_FEAT_TEST 21

	/*
	* Changes to Port feature numbers for Super speed,
	* from USB 3.0 spec Table 10-8
	*/
	#define USB_SS_PORT_FEAT_U1_TIMEOUT 23
	#define USB_SS_PORT_FEAT_U2_TIMEOUT 24
	#define USB_SS_PORT_FEAT_C_LINK_STATE 25
	#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26
	#define USB_SS_PORT_FEAT_BH_RESET 28
	#define USB_SS_PORT_FEAT_C_BH_RESET 29

	/* wPortStatus bits */
	#define USB_PORT_STAT_CONNECTION 0x0001
	#define USB_PORT_STAT_ENABLE 0x0002
	#define USB_PORT_STAT_SUSPEND 0x0004
	#define USB_PORT_STAT_OVERCURRENT 0x0008
	#define USB_PORT_STAT_RESET 0x0010
	#define USB_PORT_STAT_POWER 0x0100
	#define USB_PORT_STAT_LOW_SPEED 0x0200
	#define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */
	#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */
	#define USB_PORT_STAT_SPEED_MASK \
	(USB_PORT_STAT_LOW_SPEED \| USB_PORT_STAT_HIGH_SPEED)

	/*
	* Changes to wPortStatus bit field in USB 3.0
	* See USB 3.0 spec Table 10-10
	*/
	#define USB_SS_PORT_STAT_LINK_STATE 0x01e0
	#define USB_SS_PORT_STAT_POWER 0x0200
	#define USB_SS_PORT_STAT_SPEED 0x1c00
	#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000
	/* Bits that are the same from USB 2.0 */
	#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION \| \
	USB_PORT_STAT_ENABLE \| \
	USB_PORT_STAT_OVERCURRENT \| \
	USB_PORT_STAT_RESET)

	/* wPortChange bits */
	#define USB_PORT_STAT_C_CONNECTION 0x0001
	#define USB_PORT_STAT_C_ENABLE 0x0002
	#define USB_PORT_STAT_C_SUSPEND 0x0004
	#define USB_PORT_STAT_C_OVERCURRENT 0x0008
	#define USB_PORT_STAT_C_RESET 0x0010

	/*
	* Changes to wPortChange bit fields in USB 3.0
	* See USB 3.0 spec Table 10-12
	*/
	#define USB_SS_PORT_STAT_C_BH_RESET 0x0020
	#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040
	#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080

	/* wHubCharacteristics (masks) */
	#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
	#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
	#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
	#define HUB_CHAR_LPSM 0x0003
	#define HUB_CHAR_COMPOUND 0x0004
	#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
	#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
	#define HUB_CHAR_OCPM 0x0018
	#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
	#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */

	/*
	* Hub Status & Hub Change bit masks
	*/
	#define HUB_STATUS_LOCAL_POWER 0x0001
	#define HUB_STATUS_OVERCURRENT 0x0002

	#define HUB_CHANGE_LOCAL_POWER 0x0001
	#define HUB_CHANGE_OVERCURRENT 0x0002

	/* Mask for wIndex in get/set port feature */
	#define USB_HUB_PORT_MASK 0xf

	/* Hub class request codes */
	#define USB_REQ_SET_HUB_DEPTH 0x0c

	/*
	* As of USB 2.0, full/low speed devices are segregated into trees.
	* One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
	* The other type grows from high speed hubs when they connect to
	* full/low speed devices using "Transaction Translators" (TTs).
	*/
	struct usb_tt {
	bool multi; /* true means one TT per port */
	unsigned think_time; /* think time in ns */
	};

	/*
	* CBI style
	*/

	#define US_CBI_ADSC 0

	/* Command Block Wrapper */
	struct umass_bbb_cbw {
	__u32 dCBWSignature;
	# define CBWSIGNATURE 0x43425355
	__u32 dCBWTag;
	__u32 dCBWDataTransferLength;
	__u8 bCBWFlags;
	# define CBWFLAGS_OUT 0x00
	# define CBWFLAGS_IN 0x80
	# define CBWFLAGS_SBZ 0x7f
	__u8 bCBWLUN;
	__u8 bCDBLength;
	# define CBWCDBLENGTH 16
	__u8 CBWCDB[CBWCDBLENGTH];
	};
	#define UMASS_BBB_CBW_SIZE 31

	/* Command Status Wrapper */
	struct umass_bbb_csw {
	__u32 dCSWSignature;
	# define CSWSIGNATURE 0x53425355
	__u32 dCSWTag;
	__u32 dCSWDataResidue;
	__u8 bCSWStatus;
	# define CSWSTATUS_GOOD 0x0
	# define CSWSTATUS_FAILED 0x1
	# define CSWSTATUS_PHASE 0x2
	};
	#define UMASS_BBB_CSW_SIZE 13

	/*
	* BULK only
	*/
	#define US_BBB_RESET 0xff
	#define US_BBB_GET_MAX_LUN 0xfe

	#endif /_USB_DEFS_H_ /