| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) 2007-2008 Samuel Thibault. |
| * (C) Copyright 2020 EPAM Systems Inc. |
| */ |
| |
| #define LOG_CATEGORY UCLASS_PVBLOCK |
| |
| #include <blk.h> |
| #include <dm.h> |
| #include <dm/device-internal.h> |
| #include <malloc.h> |
| #include <part.h> |
| |
| #include <asm/armv8/mmu.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/xen/system.h> |
| |
| #include <linux/bug.h> |
| #include <linux/compat.h> |
| |
| #include <xen/events.h> |
| #include <xen/gnttab.h> |
| #include <xen/hvm.h> |
| #include <xen/xenbus.h> |
| |
| #include <xen/interface/io/ring.h> |
| #include <xen/interface/io/blkif.h> |
| #include <xen/interface/io/protocols.h> |
| |
| #define DRV_NAME "pvblock" |
| #define DRV_NAME_BLK "pvblock_blk" |
| |
| #define O_RDONLY 00 |
| #define O_RDWR 02 |
| #define WAIT_RING_TO_MS 10 |
| |
| struct blkfront_info { |
| u64 sectors; |
| unsigned int sector_size; |
| int mode; |
| int info; |
| int barrier; |
| int flush; |
| }; |
| |
| /** |
| * struct blkfront_dev - Struct representing blkfront device |
| * @dom: Domain id |
| * @ring: Front_ring structure |
| * @ring_ref: The grant reference, allowing us to grant access |
| * to the ring to the other end/domain |
| * @evtchn: Event channel used to signal ring events |
| * @handle: Events handle |
| * @nodename: Device XenStore path in format "device/vbd/" + @devid |
| * @backend: Backend XenStore path |
| * @info: Private data |
| * @devid: Device id |
| */ |
| struct blkfront_dev { |
| domid_t dom; |
| |
| struct blkif_front_ring ring; |
| grant_ref_t ring_ref; |
| evtchn_port_t evtchn; |
| blkif_vdev_t handle; |
| |
| char *nodename; |
| char *backend; |
| struct blkfront_info info; |
| unsigned int devid; |
| u8 *bounce_buffer; |
| }; |
| |
| struct blkfront_plat { |
| unsigned int devid; |
| }; |
| |
| /** |
| * struct blkfront_aiocb - AIO control block |
| * @aio_dev: Blockfront device |
| * @aio_buf: Memory buffer, which must be sector-aligned for |
| * @aio_dev sector |
| * @aio_nbytes: Size of AIO, which must be less than @aio_dev |
| * sector-sized amounts |
| * @aio_offset: Offset, which must not go beyond @aio_dev |
| * sector-aligned location |
| * @data: Data used to receiving response from ring |
| * @gref: Array of grant references |
| * @n: Number of segments |
| * @aio_cb: Represents one I/O request. |
| */ |
| struct blkfront_aiocb { |
| struct blkfront_dev *aio_dev; |
| u8 *aio_buf; |
| size_t aio_nbytes; |
| off_t aio_offset; |
| void *data; |
| |
| grant_ref_t gref[BLKIF_MAX_SEGMENTS_PER_REQUEST]; |
| int n; |
| |
| void (*aio_cb)(struct blkfront_aiocb *aiocb, int ret); |
| }; |
| |
| static void blkfront_sync(struct blkfront_dev *dev); |
| |
| static void free_blkfront(struct blkfront_dev *dev) |
| { |
| mask_evtchn(dev->evtchn); |
| free(dev->backend); |
| |
| gnttab_end_access(dev->ring_ref); |
| free(dev->ring.sring); |
| |
| unbind_evtchn(dev->evtchn); |
| |
| free(dev->bounce_buffer); |
| free(dev->nodename); |
| free(dev); |
| } |
| |
| static int init_blkfront(unsigned int devid, struct blkfront_dev *dev) |
| { |
| xenbus_transaction_t xbt; |
| char *err = NULL; |
| char *message = NULL; |
| struct blkif_sring *s; |
| int retry = 0; |
| char *msg = NULL; |
| char *c; |
| char nodename[32]; |
| char path[ARRAY_SIZE(nodename) + strlen("/backend-id") + 1]; |
| |
| sprintf(nodename, "device/vbd/%d", devid); |
| |
| memset(dev, 0, sizeof(*dev)); |
| dev->nodename = strdup(nodename); |
| dev->devid = devid; |
| |
| snprintf(path, sizeof(path), "%s/backend-id", nodename); |
| dev->dom = xenbus_read_integer(path); |
| evtchn_alloc_unbound(dev->dom, NULL, dev, &dev->evtchn); |
| |
| s = (struct blkif_sring *)memalign(PAGE_SIZE, PAGE_SIZE); |
| if (!s) { |
| printf("Failed to allocate shared ring\n"); |
| goto error; |
| } |
| |
| SHARED_RING_INIT(s); |
| FRONT_RING_INIT(&dev->ring, s, PAGE_SIZE); |
| |
| dev->ring_ref = gnttab_grant_access(dev->dom, virt_to_pfn(s), 0); |
| |
| again: |
| err = xenbus_transaction_start(&xbt); |
| if (err) { |
| printf("starting transaction\n"); |
| free(err); |
| } |
| |
| err = xenbus_printf(xbt, nodename, "ring-ref", "%u", dev->ring_ref); |
| if (err) { |
| message = "writing ring-ref"; |
| goto abort_transaction; |
| } |
| err = xenbus_printf(xbt, nodename, "event-channel", "%u", dev->evtchn); |
| if (err) { |
| message = "writing event-channel"; |
| goto abort_transaction; |
| } |
| err = xenbus_printf(xbt, nodename, "protocol", "%s", |
| XEN_IO_PROTO_ABI_NATIVE); |
| if (err) { |
| message = "writing protocol"; |
| goto abort_transaction; |
| } |
| |
| snprintf(path, sizeof(path), "%s/state", nodename); |
| err = xenbus_switch_state(xbt, path, XenbusStateConnected); |
| if (err) { |
| message = "switching state"; |
| goto abort_transaction; |
| } |
| |
| err = xenbus_transaction_end(xbt, 0, &retry); |
| free(err); |
| if (retry) { |
| goto again; |
| printf("completing transaction\n"); |
| } |
| |
| goto done; |
| |
| abort_transaction: |
| free(err); |
| err = xenbus_transaction_end(xbt, 1, &retry); |
| printf("Abort transaction %s\n", message); |
| goto error; |
| |
| done: |
| snprintf(path, sizeof(path), "%s/backend", nodename); |
| msg = xenbus_read(XBT_NIL, path, &dev->backend); |
| if (msg) { |
| printf("Error %s when reading the backend path %s\n", |
| msg, path); |
| goto error; |
| } |
| |
| dev->handle = strtoul(strrchr(nodename, '/') + 1, NULL, 0); |
| |
| { |
| XenbusState state; |
| char path[strlen(dev->backend) + |
| strlen("/feature-flush-cache") + 1]; |
| |
| snprintf(path, sizeof(path), "%s/mode", dev->backend); |
| msg = xenbus_read(XBT_NIL, path, &c); |
| if (msg) { |
| printf("Error %s when reading the mode\n", msg); |
| goto error; |
| } |
| if (*c == 'w') |
| dev->info.mode = O_RDWR; |
| else |
| dev->info.mode = O_RDONLY; |
| free(c); |
| |
| snprintf(path, sizeof(path), "%s/state", dev->backend); |
| |
| msg = NULL; |
| state = xenbus_read_integer(path); |
| while (!msg && state < XenbusStateConnected) |
| msg = xenbus_wait_for_state_change(path, &state); |
| if (msg || state != XenbusStateConnected) { |
| printf("backend not available, state=%d\n", state); |
| goto error; |
| } |
| |
| snprintf(path, sizeof(path), "%s/info", dev->backend); |
| dev->info.info = xenbus_read_integer(path); |
| |
| snprintf(path, sizeof(path), "%s/sectors", dev->backend); |
| /* |
| * FIXME: read_integer returns an int, so disk size |
| * limited to 1TB for now |
| */ |
| dev->info.sectors = xenbus_read_integer(path); |
| |
| snprintf(path, sizeof(path), "%s/sector-size", dev->backend); |
| dev->info.sector_size = xenbus_read_integer(path); |
| |
| snprintf(path, sizeof(path), "%s/feature-barrier", |
| dev->backend); |
| dev->info.barrier = xenbus_read_integer(path); |
| |
| snprintf(path, sizeof(path), "%s/feature-flush-cache", |
| dev->backend); |
| dev->info.flush = xenbus_read_integer(path); |
| } |
| unmask_evtchn(dev->evtchn); |
| |
| dev->bounce_buffer = memalign(dev->info.sector_size, |
| dev->info.sector_size); |
| if (!dev->bounce_buffer) { |
| printf("Failed to allocate bouncing buffer\n"); |
| goto error; |
| } |
| |
| debug("%llu sectors of %u bytes, bounce buffer at %p\n", |
| dev->info.sectors, dev->info.sector_size, |
| dev->bounce_buffer); |
| |
| return 0; |
| |
| error: |
| free(msg); |
| free(err); |
| free_blkfront(dev); |
| return -ENODEV; |
| } |
| |
| static void shutdown_blkfront(struct blkfront_dev *dev) |
| { |
| char *err = NULL, *err2; |
| XenbusState state; |
| |
| char path[strlen(dev->backend) + strlen("/state") + 1]; |
| char nodename[strlen(dev->nodename) + strlen("/event-channel") + 1]; |
| |
| debug("Close " DRV_NAME ", device ID %d\n", dev->devid); |
| |
| blkfront_sync(dev); |
| |
| snprintf(path, sizeof(path), "%s/state", dev->backend); |
| snprintf(nodename, sizeof(nodename), "%s/state", dev->nodename); |
| |
| err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateClosing); |
| if (err) { |
| printf("%s: error changing state to %d: %s\n", __func__, |
| XenbusStateClosing, err); |
| goto close; |
| } |
| |
| state = xenbus_read_integer(path); |
| while (!err && state < XenbusStateClosing) |
| err = xenbus_wait_for_state_change(path, &state); |
| free(err); |
| |
| err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateClosed); |
| if (err) { |
| printf("%s: error changing state to %d: %s\n", __func__, |
| XenbusStateClosed, err); |
| goto close; |
| } |
| |
| state = xenbus_read_integer(path); |
| while (state < XenbusStateClosed) { |
| err = xenbus_wait_for_state_change(path, &state); |
| free(err); |
| } |
| |
| err = xenbus_switch_state(XBT_NIL, nodename, XenbusStateInitialising); |
| if (err) { |
| printf("%s: error changing state to %d: %s\n", __func__, |
| XenbusStateInitialising, err); |
| goto close; |
| } |
| |
| state = xenbus_read_integer(path); |
| while (!err && |
| (state < XenbusStateInitWait || state >= XenbusStateClosed)) |
| err = xenbus_wait_for_state_change(path, &state); |
| |
| close: |
| free(err); |
| |
| snprintf(nodename, sizeof(nodename), "%s/ring-ref", dev->nodename); |
| err2 = xenbus_rm(XBT_NIL, nodename); |
| free(err2); |
| snprintf(nodename, sizeof(nodename), "%s/event-channel", dev->nodename); |
| err2 = xenbus_rm(XBT_NIL, nodename); |
| free(err2); |
| |
| if (!err) |
| free_blkfront(dev); |
| } |
| |
| /** |
| * blkfront_aio_poll() - AIO polling function. |
| * @dev: Blkfront device |
| * |
| * Here we receive response from the ring and check its status. This happens |
| * until we read all data from the ring. We read the data from consumed pointer |
| * to the response pointer. Then increase consumed pointer to make it clear that |
| * the data has been read. |
| * |
| * Return: Number of consumed bytes. |
| */ |
| static int blkfront_aio_poll(struct blkfront_dev *dev) |
| { |
| RING_IDX rp, cons; |
| struct blkif_response *rsp; |
| int more; |
| int nr_consumed; |
| |
| moretodo: |
| rp = dev->ring.sring->rsp_prod; |
| rmb(); /* Ensure we see queued responses up to 'rp'. */ |
| cons = dev->ring.rsp_cons; |
| |
| nr_consumed = 0; |
| while ((cons != rp)) { |
| struct blkfront_aiocb *aiocbp; |
| int status; |
| |
| rsp = RING_GET_RESPONSE(&dev->ring, cons); |
| nr_consumed++; |
| |
| aiocbp = (void *)(uintptr_t)rsp->id; |
| status = rsp->status; |
| |
| switch (rsp->operation) { |
| case BLKIF_OP_READ: |
| case BLKIF_OP_WRITE: |
| { |
| int j; |
| |
| if (status != BLKIF_RSP_OKAY) |
| printf("%s error %d on %s at offset %llu, num bytes %llu\n", |
| rsp->operation == BLKIF_OP_READ ? |
| "read" : "write", |
| status, aiocbp->aio_dev->nodename, |
| (unsigned long long)aiocbp->aio_offset, |
| (unsigned long long)aiocbp->aio_nbytes); |
| |
| for (j = 0; j < aiocbp->n; j++) |
| gnttab_end_access(aiocbp->gref[j]); |
| |
| break; |
| } |
| |
| case BLKIF_OP_WRITE_BARRIER: |
| if (status != BLKIF_RSP_OKAY) |
| printf("write barrier error %d\n", status); |
| break; |
| case BLKIF_OP_FLUSH_DISKCACHE: |
| if (status != BLKIF_RSP_OKAY) |
| printf("flush error %d\n", status); |
| break; |
| |
| default: |
| printf("unrecognized block operation %d response (status %d)\n", |
| rsp->operation, status); |
| break; |
| } |
| |
| dev->ring.rsp_cons = ++cons; |
| /* Nota: callback frees aiocbp itself */ |
| if (aiocbp && aiocbp->aio_cb) |
| aiocbp->aio_cb(aiocbp, status ? -EIO : 0); |
| if (dev->ring.rsp_cons != cons) |
| /* We reentered, we must not continue here */ |
| break; |
| } |
| |
| RING_FINAL_CHECK_FOR_RESPONSES(&dev->ring, more); |
| if (more) |
| goto moretodo; |
| |
| return nr_consumed; |
| } |
| |
| static void blkfront_wait_slot(struct blkfront_dev *dev) |
| { |
| /* Wait for a slot */ |
| if (RING_FULL(&dev->ring)) { |
| while (true) { |
| blkfront_aio_poll(dev); |
| if (!RING_FULL(&dev->ring)) |
| break; |
| wait_event_timeout(NULL, !RING_FULL(&dev->ring), |
| WAIT_RING_TO_MS); |
| } |
| } |
| } |
| |
| /** |
| * blkfront_aio_poll() - Issue an aio. |
| * @aiocbp: AIO control block structure |
| * @write: Describes is it read or write operation |
| * 0 - read |
| * 1 - write |
| * |
| * We check whether the AIO parameters meet the requirements of the device. |
| * Then receive request from ring and define its arguments. After this we |
| * grant access to the grant references. The last step is notifying about AIO |
| * via event channel. |
| */ |
| static void blkfront_aio(struct blkfront_aiocb *aiocbp, int write) |
| { |
| struct blkfront_dev *dev = aiocbp->aio_dev; |
| struct blkif_request *req; |
| RING_IDX i; |
| int notify; |
| int n, j; |
| uintptr_t start, end; |
| |
| /* Can't io at non-sector-aligned location */ |
| BUG_ON(aiocbp->aio_offset & (dev->info.sector_size - 1)); |
| /* Can't io non-sector-sized amounts */ |
| BUG_ON(aiocbp->aio_nbytes & (dev->info.sector_size - 1)); |
| /* Can't io non-sector-aligned buffer */ |
| BUG_ON(((uintptr_t)aiocbp->aio_buf & (dev->info.sector_size - 1))); |
| |
| start = (uintptr_t)aiocbp->aio_buf & PAGE_MASK; |
| end = ((uintptr_t)aiocbp->aio_buf + aiocbp->aio_nbytes + |
| PAGE_SIZE - 1) & PAGE_MASK; |
| n = (end - start) / PAGE_SIZE; |
| aiocbp->n = n; |
| |
| BUG_ON(n > BLKIF_MAX_SEGMENTS_PER_REQUEST); |
| |
| blkfront_wait_slot(dev); |
| i = dev->ring.req_prod_pvt; |
| req = RING_GET_REQUEST(&dev->ring, i); |
| |
| req->operation = write ? BLKIF_OP_WRITE : BLKIF_OP_READ; |
| req->nr_segments = n; |
| req->handle = dev->handle; |
| req->id = (uintptr_t)aiocbp; |
| req->sector_number = aiocbp->aio_offset / dev->info.sector_size; |
| |
| for (j = 0; j < n; j++) { |
| req->seg[j].first_sect = 0; |
| req->seg[j].last_sect = PAGE_SIZE / dev->info.sector_size - 1; |
| } |
| req->seg[0].first_sect = ((uintptr_t)aiocbp->aio_buf & ~PAGE_MASK) / |
| dev->info.sector_size; |
| req->seg[n - 1].last_sect = (((uintptr_t)aiocbp->aio_buf + |
| aiocbp->aio_nbytes - 1) & ~PAGE_MASK) / dev->info.sector_size; |
| for (j = 0; j < n; j++) { |
| uintptr_t data = start + j * PAGE_SIZE; |
| |
| if (!write) { |
| /* Trigger CoW if needed */ |
| *(char *)(data + (req->seg[j].first_sect * |
| dev->info.sector_size)) = 0; |
| barrier(); |
| } |
| req->seg[j].gref = gnttab_grant_access(dev->dom, |
| virt_to_pfn((void *)data), |
| write); |
| aiocbp->gref[j] = req->seg[j].gref; |
| } |
| |
| dev->ring.req_prod_pvt = i + 1; |
| |
| wmb(); |
| RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&dev->ring, notify); |
| |
| if (notify) |
| notify_remote_via_evtchn(dev->evtchn); |
| } |
| |
| static void blkfront_aio_cb(struct blkfront_aiocb *aiocbp, int ret) |
| { |
| aiocbp->data = (void *)1; |
| aiocbp->aio_cb = NULL; |
| } |
| |
| static void blkfront_io(struct blkfront_aiocb *aiocbp, int write) |
| { |
| aiocbp->aio_cb = blkfront_aio_cb; |
| blkfront_aio(aiocbp, write); |
| aiocbp->data = NULL; |
| |
| while (true) { |
| blkfront_aio_poll(aiocbp->aio_dev); |
| if (aiocbp->data) |
| break; |
| cpu_relax(); |
| } |
| } |
| |
| static void blkfront_push_operation(struct blkfront_dev *dev, u8 op, |
| uint64_t id) |
| { |
| struct blkif_request *req; |
| int notify, i; |
| |
| blkfront_wait_slot(dev); |
| i = dev->ring.req_prod_pvt; |
| req = RING_GET_REQUEST(&dev->ring, i); |
| req->operation = op; |
| req->nr_segments = 0; |
| req->handle = dev->handle; |
| req->id = id; |
| req->sector_number = 0; |
| dev->ring.req_prod_pvt = i + 1; |
| wmb(); |
| RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&dev->ring, notify); |
| if (notify) |
| notify_remote_via_evtchn(dev->evtchn); |
| } |
| |
| static void blkfront_sync(struct blkfront_dev *dev) |
| { |
| if (dev->info.mode == O_RDWR) { |
| if (dev->info.barrier == 1) |
| blkfront_push_operation(dev, |
| BLKIF_OP_WRITE_BARRIER, 0); |
| |
| if (dev->info.flush == 1) |
| blkfront_push_operation(dev, |
| BLKIF_OP_FLUSH_DISKCACHE, 0); |
| } |
| |
| while (true) { |
| blkfront_aio_poll(dev); |
| if (RING_FREE_REQUESTS(&dev->ring) == RING_SIZE(&dev->ring)) |
| break; |
| cpu_relax(); |
| } |
| } |
| |
| /** |
| * pvblock_iop() - Issue an aio. |
| * @udev: Pvblock device |
| * @blknr: Block number to read from / write to |
| * @blkcnt: Amount of blocks to read / write |
| * @buffer: Memory buffer with data to be read / write |
| * @write: Describes is it read or write operation |
| * 0 - read |
| * 1 - write |
| * |
| * Depending on the operation - reading or writing, data is read / written from the |
| * specified address (@buffer) to the sector (@blknr). |
| */ |
| static ulong pvblock_iop(struct udevice *udev, lbaint_t blknr, |
| lbaint_t blkcnt, void *buffer, int write) |
| { |
| struct blkfront_dev *blk_dev = dev_get_priv(udev); |
| struct blk_desc *desc = dev_get_uclass_plat(udev); |
| struct blkfront_aiocb aiocb; |
| lbaint_t blocks_todo; |
| bool unaligned; |
| |
| if (blkcnt == 0) |
| return 0; |
| |
| if ((blknr + blkcnt) > desc->lba) { |
| printf(DRV_NAME ": block number 0x" LBAF " exceeds max(0x" LBAF ")\n", |
| blknr + blkcnt, desc->lba); |
| return 0; |
| } |
| |
| unaligned = (uintptr_t)buffer & (blk_dev->info.sector_size - 1); |
| |
| aiocb.aio_dev = blk_dev; |
| aiocb.aio_offset = blknr * desc->blksz; |
| aiocb.aio_cb = NULL; |
| aiocb.data = NULL; |
| blocks_todo = blkcnt; |
| do { |
| aiocb.aio_buf = unaligned ? blk_dev->bounce_buffer : buffer; |
| |
| if (write && unaligned) |
| memcpy(blk_dev->bounce_buffer, buffer, desc->blksz); |
| |
| aiocb.aio_nbytes = unaligned ? desc->blksz : |
| min((size_t)((BLKIF_MAX_SEGMENTS_PER_REQUEST - 1) |
| * PAGE_SIZE), |
| (size_t)(blocks_todo * desc->blksz)); |
| |
| blkfront_io(&aiocb, write); |
| |
| if (!write && unaligned) |
| memcpy(buffer, blk_dev->bounce_buffer, desc->blksz); |
| |
| aiocb.aio_offset += aiocb.aio_nbytes; |
| buffer += aiocb.aio_nbytes; |
| blocks_todo -= aiocb.aio_nbytes / desc->blksz; |
| } while (blocks_todo > 0); |
| |
| return blkcnt; |
| } |
| |
| ulong pvblock_blk_read(struct udevice *udev, lbaint_t blknr, lbaint_t blkcnt, |
| void *buffer) |
| { |
| return pvblock_iop(udev, blknr, blkcnt, buffer, 0); |
| } |
| |
| ulong pvblock_blk_write(struct udevice *udev, lbaint_t blknr, lbaint_t blkcnt, |
| const void *buffer) |
| { |
| return pvblock_iop(udev, blknr, blkcnt, (void *)buffer, 1); |
| } |
| |
| static int pvblock_blk_bind(struct udevice *udev) |
| { |
| struct blk_desc *desc = dev_get_uclass_plat(udev); |
| int devnum; |
| |
| desc->uclass_id = UCLASS_PVBLOCK; |
| /* |
| * Initialize the devnum to -ENODEV. This is to make sure that |
| * blk_next_free_devnum() works as expected, since the default |
| * value 0 is a valid devnum. |
| */ |
| desc->devnum = -ENODEV; |
| devnum = blk_next_free_devnum(UCLASS_PVBLOCK); |
| if (devnum < 0) |
| return devnum; |
| desc->devnum = devnum; |
| desc->part_type = PART_TYPE_UNKNOWN; |
| desc->bdev = udev; |
| |
| strncpy(desc->vendor, "Xen", sizeof(desc->vendor)); |
| strncpy(desc->revision, "1", sizeof(desc->revision)); |
| strncpy(desc->product, "Virtual disk", sizeof(desc->product)); |
| |
| return 0; |
| } |
| |
| static int pvblock_blk_probe(struct udevice *udev) |
| { |
| struct blkfront_dev *blk_dev = dev_get_priv(udev); |
| struct blkfront_plat *plat = dev_get_plat(udev); |
| struct blk_desc *desc = dev_get_uclass_plat(udev); |
| int ret, devid; |
| |
| devid = plat->devid; |
| free(plat); |
| |
| ret = init_blkfront(devid, blk_dev); |
| if (ret < 0) |
| return ret; |
| |
| desc->blksz = blk_dev->info.sector_size; |
| desc->lba = blk_dev->info.sectors; |
| desc->log2blksz = LOG2(blk_dev->info.sector_size); |
| |
| return 0; |
| } |
| |
| static int pvblock_blk_remove(struct udevice *udev) |
| { |
| struct blkfront_dev *blk_dev = dev_get_priv(udev); |
| |
| shutdown_blkfront(blk_dev); |
| return 0; |
| } |
| |
| static const struct blk_ops pvblock_blk_ops = { |
| .read = pvblock_blk_read, |
| .write = pvblock_blk_write, |
| }; |
| |
| U_BOOT_DRIVER(pvblock_blk) = { |
| .name = DRV_NAME_BLK, |
| .id = UCLASS_BLK, |
| .ops = &pvblock_blk_ops, |
| .bind = pvblock_blk_bind, |
| .probe = pvblock_blk_probe, |
| .remove = pvblock_blk_remove, |
| .priv_auto = sizeof(struct blkfront_dev), |
| .flags = DM_FLAG_OS_PREPARE, |
| }; |
| |
| /******************************************************************************* |
| * Para-virtual block device class |
| *******************************************************************************/ |
| |
| typedef int (*enum_vbd_callback)(struct udevice *parent, unsigned int devid); |
| |
| static int on_new_vbd(struct udevice *parent, unsigned int devid) |
| { |
| struct driver_info info; |
| struct udevice *udev; |
| struct blkfront_plat *plat; |
| int ret; |
| |
| debug("New " DRV_NAME_BLK ", device ID %d\n", devid); |
| |
| plat = malloc(sizeof(struct blkfront_plat)); |
| if (!plat) { |
| printf("Failed to allocate platform data\n"); |
| return -ENOMEM; |
| } |
| |
| plat->devid = devid; |
| |
| info.name = DRV_NAME_BLK; |
| info.plat = plat; |
| |
| ret = device_bind_by_name(parent, false, &info, &udev); |
| if (ret < 0) { |
| printf("Failed to bind " DRV_NAME_BLK " to device with ID %d, ret: %d\n", |
| devid, ret); |
| free(plat); |
| } |
| return ret; |
| } |
| |
| static int xenbus_enumerate_vbd(struct udevice *udev, enum_vbd_callback clb) |
| { |
| char **dirs, *msg; |
| int i, ret; |
| |
| msg = xenbus_ls(XBT_NIL, "device/vbd", &dirs); |
| if (msg) { |
| printf("Failed to read device/vbd directory: %s\n", msg); |
| free(msg); |
| return -ENODEV; |
| } |
| |
| for (i = 0; dirs[i]; i++) { |
| int devid; |
| |
| sscanf(dirs[i], "%d", &devid); |
| ret = clb(udev, devid); |
| if (ret < 0) |
| goto fail; |
| |
| free(dirs[i]); |
| } |
| ret = 0; |
| |
| fail: |
| for (; dirs[i]; i++) |
| free(dirs[i]); |
| free(dirs); |
| return ret; |
| } |
| |
| static void print_pvblock_devices(void) |
| { |
| struct udevice *udev; |
| bool first = true; |
| const char *class_name; |
| |
| class_name = uclass_get_name(UCLASS_PVBLOCK); |
| for (blk_first_device(UCLASS_PVBLOCK, &udev); udev; |
| blk_next_device(&udev), first = false) { |
| struct blk_desc *desc = dev_get_uclass_plat(udev); |
| |
| if (!first) |
| puts(", "); |
| printf("%s: %d", class_name, desc->devnum); |
| } |
| printf("\n"); |
| } |
| |
| void pvblock_init(void) |
| { |
| struct driver_info info; |
| int ret; |
| |
| /* |
| * At this point Xen drivers have already initialized, |
| * so we can instantiate the class driver and enumerate |
| * virtual block devices. |
| */ |
| info.name = DRV_NAME; |
| ret = device_bind_by_name(gd->dm_root, false, &info, NULL); |
| if (ret < 0) |
| printf("Failed to bind " DRV_NAME ", ret: %d\n", ret); |
| |
| /* Bootstrap virtual block devices class driver */ |
| uclass_probe_all(UCLASS_PVBLOCK); |
| |
| print_pvblock_devices(); |
| } |
| |
| static int pvblock_probe(struct udevice *udev) |
| { |
| struct uclass *uc; |
| int ret; |
| |
| if (xenbus_enumerate_vbd(udev, on_new_vbd) < 0) |
| return -ENODEV; |
| |
| ret = uclass_get(UCLASS_BLK, &uc); |
| if (ret) |
| return ret; |
| uclass_foreach_dev_probe(UCLASS_BLK, udev); |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(pvblock_drv) = { |
| .name = DRV_NAME, |
| .id = UCLASS_PVBLOCK, |
| .probe = pvblock_probe, |
| }; |
| |
| UCLASS_DRIVER(pvblock) = { |
| .name = DRV_NAME, |
| .id = UCLASS_PVBLOCK, |
| }; |