| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2020 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| */ |
| #include <backlight.h> |
| #include <dm.h> |
| #include <mipi_dsi.h> |
| #include <panel.h> |
| #include <asm/gpio.h> |
| #include <dm/device_compat.h> |
| #include <linux/delay.h> |
| #include <power/regulator.h> |
| |
| struct tl070wsh30_panel_priv { |
| struct udevice *reg; |
| struct udevice *backlight; |
| struct gpio_desc reset; |
| }; |
| |
| static const struct display_timing default_timing = { |
| .pixelclock.typ = 47250000, |
| .hactive.typ = 1024, |
| .hfront_porch.typ = 46, |
| .hback_porch.typ = 100, |
| .hsync_len.typ = 80, |
| .vactive.typ = 600, |
| .vfront_porch.typ = 5, |
| .vback_porch.typ = 20, |
| .vsync_len.typ = 5, |
| .flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH, |
| }; |
| |
| static int tl070wsh30_panel_enable_backlight(struct udevice *dev) |
| { |
| struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| struct mipi_dsi_device *device = plat->device; |
| struct tl070wsh30_panel_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| ret = mipi_dsi_attach(device); |
| if (ret < 0) |
| return ret; |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(device); |
| if (ret) |
| return ret; |
| |
| mdelay(200); |
| |
| ret = mipi_dsi_dcs_set_display_on(device); |
| if (ret) |
| return ret; |
| |
| mdelay(20); |
| |
| ret = backlight_enable(priv->backlight); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int tl070wsh30_panel_get_display_timing(struct udevice *dev, |
| struct display_timing *timings) |
| { |
| memcpy(timings, &default_timing, sizeof(*timings)); |
| |
| return 0; |
| } |
| |
| static int tl070wsh30_panel_of_to_plat(struct udevice *dev) |
| { |
| struct tl070wsh30_panel_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| if (CONFIG_IS_ENABLED(DM_REGULATOR)) { |
| ret = device_get_supply_regulator(dev, "power-supply", |
| &priv->reg); |
| if (ret && ret != -ENOENT) { |
| dev_err(dev, "Warning: cannot get power supply\n"); |
| return ret; |
| } |
| } |
| |
| ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, |
| GPIOD_IS_OUT); |
| if (ret) { |
| dev_err(dev, "Warning: cannot get reset GPIO\n"); |
| if (ret != -ENOENT) |
| return ret; |
| } |
| |
| ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, |
| "backlight", &priv->backlight); |
| if (ret) { |
| dev_err(dev, "Cannot get backlight: ret=%d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int tl070wsh30_panel_probe(struct udevice *dev) |
| { |
| struct tl070wsh30_panel_priv *priv = dev_get_priv(dev); |
| struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| int ret; |
| |
| if (CONFIG_IS_ENABLED(DM_REGULATOR) && priv->reg) { |
| ret = regulator_set_enable(priv->reg, true); |
| if (ret) |
| return ret; |
| } |
| |
| mdelay(10); |
| |
| /* reset panel */ |
| dm_gpio_set_value(&priv->reset, true); |
| |
| mdelay(10); |
| |
| dm_gpio_set_value(&priv->reset, false); |
| |
| /* fill characteristics of DSI data link */ |
| plat->lanes = 4; |
| plat->format = MIPI_DSI_FMT_RGB888; |
| plat->mode_flags = MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_MODE_VIDEO_BURST | |
| MIPI_DSI_MODE_LPM; |
| |
| return 0; |
| } |
| |
| static const struct panel_ops tl070wsh30_panel_ops = { |
| .enable_backlight = tl070wsh30_panel_enable_backlight, |
| .get_display_timing = tl070wsh30_panel_get_display_timing, |
| }; |
| |
| static const struct udevice_id tl070wsh30_panel_ids[] = { |
| { .compatible = "tdo,tl070wsh30" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(tl070wsh30_panel) = { |
| .name = "tl070wsh30_panel", |
| .id = UCLASS_PANEL, |
| .of_match = tl070wsh30_panel_ids, |
| .ops = &tl070wsh30_panel_ops, |
| .of_to_plat = tl070wsh30_panel_of_to_plat, |
| .probe = tl070wsh30_panel_probe, |
| .plat_auto = sizeof(struct mipi_dsi_panel_plat), |
| .priv_auto = sizeof(struct tl070wsh30_panel_priv), |
| }; |