| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Texas Instruments' K3 R5 Remoteproc driver |
| * |
| * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/ |
| * Lokesh Vutla <lokeshvutla@ti.com> |
| * Suman Anna <s-anna@ti.com> |
| */ |
| |
| #include <dm.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <remoteproc.h> |
| #include <errno.h> |
| #include <clk.h> |
| #include <reset.h> |
| #include <asm/io.h> |
| #include <dm/device_compat.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/soc/ti/ti_sci_protocol.h> |
| #include "ti_sci_proc.h" |
| #include <mach/security.h> |
| |
| /* |
| * R5F's view of this address can either be for ATCM or BTCM with the other |
| * at address 0x0 based on loczrama signal. |
| */ |
| #define K3_R5_TCM_DEV_ADDR 0x41010000 |
| |
| /* R5 TI-SCI Processor Configuration Flags */ |
| #define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001 |
| #define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002 |
| #define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100 |
| #define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200 |
| #define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400 |
| #define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800 |
| #define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000 |
| #define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000 |
| #define PROC_BOOT_CFG_FLAG_GEN_IGN_BOOTVECTOR 0x10000000 |
| /* Available from J7200 SoCs onwards */ |
| #define PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS 0x00004000 |
| #define PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE 0x00008000 |
| |
| /* R5 TI-SCI Processor Control Flags */ |
| #define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001 |
| |
| /* R5 TI-SCI Processor Status Flags */ |
| #define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001 |
| #define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002 |
| #define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004 |
| #define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100 |
| |
| #define NR_CORES 2 |
| |
| enum cluster_mode { |
| CLUSTER_MODE_SPLIT = 0, |
| CLUSTER_MODE_LOCKSTEP, |
| CLUSTER_MODE_SINGLECPU, |
| CLUSTER_MODE_SINGLECORE, |
| }; |
| |
| /** |
| * struct k3_r5f_ip_data - internal data structure used for IP variations |
| * @tcm_is_double: flag to denote the larger unified TCMs in certain modes |
| * @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC |
| */ |
| struct k3_r5f_ip_data { |
| bool tcm_is_double; |
| bool tcm_ecc_autoinit; |
| bool is_single_core; |
| }; |
| |
| /** |
| * struct k3_r5_mem - internal memory structure |
| * @cpu_addr: MPU virtual address of the memory region |
| * @bus_addr: Bus address used to access the memory region |
| * @dev_addr: Device address from remoteproc view |
| * @size: Size of the memory region |
| */ |
| struct k3_r5f_mem { |
| void __iomem *cpu_addr; |
| phys_addr_t bus_addr; |
| u32 dev_addr; |
| size_t size; |
| }; |
| |
| /** |
| * struct k3_r5f_core - K3 R5 core structure |
| * @dev: cached device pointer |
| * @cluster: pointer to the parent cluster. |
| * @reset: reset control handle |
| * @tsp: TI-SCI processor control handle |
| * @ipdata: cached pointer to R5F IP specific feature data |
| * @mem: Array of available internal memories |
| * @num_mem: Number of available memories |
| * @atcm_enable: flag to control ATCM enablement |
| * @btcm_enable: flag to control BTCM enablement |
| * @loczrama: flag to dictate which TCM is at device address 0x0 |
| * @in_use: flag to tell if the core is already in use. |
| */ |
| struct k3_r5f_core { |
| struct udevice *dev; |
| struct k3_r5f_cluster *cluster; |
| struct reset_ctl reset; |
| struct ti_sci_proc tsp; |
| struct k3_r5f_ip_data *ipdata; |
| struct k3_r5f_mem *mem; |
| int num_mems; |
| u32 atcm_enable; |
| u32 btcm_enable; |
| u32 loczrama; |
| bool in_use; |
| }; |
| |
| /** |
| * struct k3_r5f_cluster - K3 R5F Cluster structure |
| * @mode: Mode to configure the Cluster - Split or LockStep |
| * @cores: Array of pointers to R5 cores within the cluster |
| */ |
| struct k3_r5f_cluster { |
| enum cluster_mode mode; |
| struct k3_r5f_core *cores[NR_CORES]; |
| }; |
| |
| static bool is_primary_core(struct k3_r5f_core *core) |
| { |
| return core == core->cluster->cores[0]; |
| } |
| |
| static int k3_r5f_proc_request(struct k3_r5f_core *core) |
| { |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int i, ret; |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { |
| for (i = 0; i < NR_CORES; i++) { |
| ret = ti_sci_proc_request(&cluster->cores[i]->tsp); |
| if (ret) |
| goto proc_release; |
| } |
| } else { |
| ret = ti_sci_proc_request(&core->tsp); |
| } |
| |
| return 0; |
| |
| proc_release: |
| while (i >= 0) { |
| ti_sci_proc_release(&cluster->cores[i]->tsp); |
| i--; |
| } |
| return ret; |
| } |
| |
| static void k3_r5f_proc_release(struct k3_r5f_core *core) |
| { |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int i; |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) |
| for (i = 0; i < NR_CORES; i++) |
| ti_sci_proc_release(&cluster->cores[i]->tsp); |
| else |
| ti_sci_proc_release(&core->tsp); |
| } |
| |
| static int k3_r5f_lockstep_release(struct k3_r5f_cluster *cluster) |
| { |
| int ret, c; |
| |
| debug("%s\n", __func__); |
| |
| for (c = NR_CORES - 1; c >= 0; c--) { |
| ret = ti_sci_proc_power_domain_on(&cluster->cores[c]->tsp); |
| if (ret) |
| goto unroll_module_reset; |
| } |
| |
| /* deassert local reset on all applicable cores */ |
| for (c = NR_CORES - 1; c >= 0; c--) { |
| ret = reset_deassert(&cluster->cores[c]->reset); |
| if (ret) |
| goto unroll_local_reset; |
| } |
| |
| return 0; |
| |
| unroll_local_reset: |
| while (c < NR_CORES) { |
| reset_assert(&cluster->cores[c]->reset); |
| c++; |
| } |
| c = 0; |
| unroll_module_reset: |
| while (c < NR_CORES) { |
| ti_sci_proc_power_domain_off(&cluster->cores[c]->tsp); |
| c++; |
| } |
| |
| return ret; |
| } |
| |
| static int k3_r5f_split_release(struct k3_r5f_core *core) |
| { |
| int ret; |
| |
| dev_dbg(core->dev, "%s\n", __func__); |
| |
| ret = ti_sci_proc_power_domain_on(&core->tsp); |
| if (ret) { |
| dev_err(core->dev, "module-reset deassert failed, ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = reset_deassert(&core->reset); |
| if (ret) { |
| dev_err(core->dev, "local-reset deassert failed, ret = %d\n", |
| ret); |
| if (ti_sci_proc_power_domain_off(&core->tsp)) |
| dev_warn(core->dev, "module-reset assert back failed\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int k3_r5f_prepare(struct udevice *dev) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int ret = 0; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) |
| ret = k3_r5f_lockstep_release(cluster); |
| else |
| ret = k3_r5f_split_release(core); |
| |
| if (ret) |
| dev_err(dev, "Unable to enable cores for TCM loading %d\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int k3_r5f_core_sanity_check(struct k3_r5f_core *core) |
| { |
| struct k3_r5f_cluster *cluster = core->cluster; |
| |
| if (core->in_use) { |
| dev_err(core->dev, |
| "Invalid op: Trying to load/start on already running core %d\n", |
| core->tsp.proc_id); |
| return -EINVAL; |
| } |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP && !cluster->cores[1]) { |
| dev_err(core->dev, |
| "Secondary core is not probed in this cluster\n"); |
| return -EAGAIN; |
| } |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP && !is_primary_core(core)) { |
| dev_err(core->dev, |
| "Invalid op: Trying to start secondary core %d in lockstep mode\n", |
| core->tsp.proc_id); |
| return -EINVAL; |
| } |
| |
| if (cluster->mode == CLUSTER_MODE_SPLIT && !is_primary_core(core)) { |
| if (!core->cluster->cores[0]->in_use) { |
| dev_err(core->dev, |
| "Invalid seq: Enable primary core before loading secondary core\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Zero out TCMs so that ECC can be effective on all TCM addresses */ |
| void k3_r5f_init_tcm_memories(struct k3_r5f_core *core, bool auto_inited) |
| { |
| if (core->ipdata->tcm_ecc_autoinit && auto_inited) |
| return; |
| |
| if (core->atcm_enable) |
| memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size); |
| if (core->btcm_enable) |
| memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size); |
| } |
| |
| /** |
| * k3_r5f_load() - Load up the Remote processor image |
| * @dev: rproc device pointer |
| * @addr: Address at which image is available |
| * @size: size of the image |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| u64 boot_vector; |
| u32 ctrl, sts, cfg = 0; |
| bool mem_auto_init; |
| void *image_addr = (void *)addr; |
| int ret; |
| |
| dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size); |
| |
| ret = k3_r5f_core_sanity_check(core); |
| if (ret) |
| return ret; |
| |
| ret = k3_r5f_proc_request(core); |
| if (ret) |
| return ret; |
| |
| ret = ti_sci_proc_get_status(&core->tsp, &boot_vector, &cfg, &ctrl, |
| &sts); |
| if (ret) |
| return ret; |
| mem_auto_init = !(cfg & PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS); |
| |
| ret = k3_r5f_prepare(dev); |
| if (ret) { |
| dev_err(dev, "R5f prepare failed for core %d\n", |
| core->tsp.proc_id); |
| goto proc_release; |
| } |
| |
| k3_r5f_init_tcm_memories(core, mem_auto_init); |
| |
| ti_secure_image_post_process(&image_addr, &size); |
| |
| ret = rproc_elf_load_image(dev, addr, size); |
| if (ret < 0) { |
| dev_err(dev, "Loading elf failedi %d\n", ret); |
| goto proc_release; |
| } |
| |
| boot_vector = rproc_elf_get_boot_addr(dev, addr); |
| |
| dev_dbg(dev, "%s: Boot vector = 0x%llx\n", __func__, boot_vector); |
| |
| ret = ti_sci_proc_set_config(&core->tsp, boot_vector, 0, 0); |
| |
| proc_release: |
| k3_r5f_proc_release(core); |
| |
| return ret; |
| } |
| |
| static int k3_r5f_core_halt(struct k3_r5f_core *core) |
| { |
| int ret; |
| |
| ret = ti_sci_proc_set_control(&core->tsp, |
| PROC_BOOT_CTRL_FLAG_R5_CORE_HALT, 0); |
| if (ret) |
| dev_err(core->dev, "Core %d failed to stop\n", |
| core->tsp.proc_id); |
| |
| return ret; |
| } |
| |
| static int k3_r5f_core_run(struct k3_r5f_core *core) |
| { |
| int ret; |
| |
| ret = ti_sci_proc_set_control(&core->tsp, |
| 0, PROC_BOOT_CTRL_FLAG_R5_CORE_HALT); |
| if (ret) { |
| dev_err(core->dev, "Core %d failed to start\n", |
| core->tsp.proc_id); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * k3_r5f_start() - Start the remote processor |
| * @dev: rproc device pointer |
| * |
| * Return: 0 if all went ok, else return appropriate error |
| */ |
| static int k3_r5f_start(struct udevice *dev) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int ret, c; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| ret = k3_r5f_core_sanity_check(core); |
| if (ret) |
| return ret; |
| |
| ret = k3_r5f_proc_request(core); |
| if (ret) |
| return ret; |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { |
| if (is_primary_core(core)) { |
| for (c = NR_CORES - 1; c >= 0; c--) { |
| ret = k3_r5f_core_run(cluster->cores[c]); |
| if (ret) |
| goto unroll_core_run; |
| } |
| } else { |
| dev_err(dev, "Invalid op: Trying to start secondary core %d in lockstep mode\n", |
| core->tsp.proc_id); |
| ret = -EINVAL; |
| goto proc_release; |
| } |
| } else { |
| ret = k3_r5f_core_run(core); |
| if (ret) |
| goto proc_release; |
| } |
| |
| core->in_use = true; |
| |
| k3_r5f_proc_release(core); |
| return 0; |
| |
| unroll_core_run: |
| while (c < NR_CORES) { |
| k3_r5f_core_halt(cluster->cores[c]); |
| c++; |
| } |
| proc_release: |
| k3_r5f_proc_release(core); |
| |
| return ret; |
| } |
| |
| static int k3_r5f_split_reset(struct k3_r5f_core *core) |
| { |
| int ret; |
| |
| dev_dbg(core->dev, "%s\n", __func__); |
| |
| if (reset_assert(&core->reset)) |
| ret = -EINVAL; |
| |
| if (ti_sci_proc_power_domain_off(&core->tsp)) |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static int k3_r5f_lockstep_reset(struct k3_r5f_cluster *cluster) |
| { |
| int ret = 0, c; |
| |
| debug("%s\n", __func__); |
| |
| for (c = 0; c < NR_CORES; c++) |
| if (reset_assert(&cluster->cores[c]->reset)) |
| ret = -EINVAL; |
| |
| /* disable PSC modules on all applicable cores */ |
| for (c = 0; c < NR_CORES; c++) |
| if (ti_sci_proc_power_domain_off(&cluster->cores[c]->tsp)) |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static int k3_r5f_unprepare(struct udevice *dev) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { |
| if (is_primary_core(core)) |
| ret = k3_r5f_lockstep_reset(cluster); |
| } else { |
| ret = k3_r5f_split_reset(core); |
| } |
| |
| if (ret) |
| dev_warn(dev, "Unable to enable cores for TCM loading %d\n", |
| ret); |
| |
| return 0; |
| } |
| |
| static int k3_r5f_stop(struct udevice *dev) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| struct k3_r5f_cluster *cluster = core->cluster; |
| int c, ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| ret = k3_r5f_proc_request(core); |
| if (ret) |
| return ret; |
| |
| core->in_use = false; |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) { |
| if (is_primary_core(core)) { |
| for (c = 0; c < NR_CORES; c++) |
| k3_r5f_core_halt(cluster->cores[c]); |
| } else { |
| dev_err(dev, "Invalid op: Trying to stop secondary core in lockstep mode\n"); |
| ret = -EINVAL; |
| goto proc_release; |
| } |
| } else { |
| k3_r5f_core_halt(core); |
| } |
| |
| ret = k3_r5f_unprepare(dev); |
| proc_release: |
| k3_r5f_proc_release(core); |
| return ret; |
| } |
| |
| static void *k3_r5f_da_to_va(struct udevice *dev, ulong da, ulong size) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| void __iomem *va = NULL; |
| phys_addr_t bus_addr; |
| u32 dev_addr, offset; |
| ulong mem_size; |
| int i; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| if (size <= 0) |
| return NULL; |
| |
| for (i = 0; i < core->num_mems; i++) { |
| bus_addr = core->mem[i].bus_addr; |
| dev_addr = core->mem[i].dev_addr; |
| mem_size = core->mem[i].size; |
| |
| if (da >= bus_addr && (da + size) <= (bus_addr + mem_size)) { |
| offset = da - bus_addr; |
| va = core->mem[i].cpu_addr + offset; |
| return (__force void *)va; |
| } |
| |
| if (da >= dev_addr && (da + size) <= (dev_addr + mem_size)) { |
| offset = da - dev_addr; |
| va = core->mem[i].cpu_addr + offset; |
| return (__force void *)va; |
| } |
| } |
| |
| /* Assume it is DDR region and return da */ |
| return map_physmem(da, size, MAP_NOCACHE); |
| } |
| |
| static int k3_r5f_init(struct udevice *dev) |
| { |
| return 0; |
| } |
| |
| static int k3_r5f_reset(struct udevice *dev) |
| { |
| return 0; |
| } |
| |
| static const struct dm_rproc_ops k3_r5f_rproc_ops = { |
| .init = k3_r5f_init, |
| .reset = k3_r5f_reset, |
| .start = k3_r5f_start, |
| .stop = k3_r5f_stop, |
| .load = k3_r5f_load, |
| .device_to_virt = k3_r5f_da_to_va, |
| }; |
| |
| static int k3_r5f_rproc_configure(struct k3_r5f_core *core) |
| { |
| struct k3_r5f_cluster *cluster = core->cluster; |
| u32 set_cfg = 0, clr_cfg = 0, cfg, ctrl, sts; |
| bool lockstep_permitted; |
| u64 boot_vec = 0; |
| int ret; |
| |
| dev_dbg(core->dev, "%s\n", __func__); |
| |
| ret = ti_sci_proc_request(&core->tsp); |
| if (ret < 0) |
| return ret; |
| |
| /* Do not touch boot vector now. Load will take care of it. */ |
| clr_cfg |= PROC_BOOT_CFG_FLAG_GEN_IGN_BOOTVECTOR; |
| |
| ret = ti_sci_proc_get_status(&core->tsp, &boot_vec, &cfg, &ctrl, &sts); |
| if (ret) |
| goto out; |
| |
| /* Sanity check for Lockstep mode */ |
| lockstep_permitted = !!(sts & |
| PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED); |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP && is_primary_core(core) && |
| !lockstep_permitted) { |
| dev_err(core->dev, "LockStep mode not permitted on this \ |
| device\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Primary core only configuration */ |
| if (is_primary_core(core)) { |
| /* always enable ARM mode */ |
| clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TEINIT; |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) |
| set_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP; |
| else if (lockstep_permitted) |
| clr_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP; |
| } |
| |
| if (core->ipdata->is_single_core) |
| set_cfg = PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE; |
| |
| if (core->atcm_enable) |
| set_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN; |
| else |
| clr_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN; |
| |
| if (core->btcm_enable) |
| set_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN; |
| else |
| clr_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN; |
| |
| if (core->loczrama) |
| set_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE; |
| else |
| clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE; |
| |
| ret = k3_r5f_core_halt(core); |
| if (ret) |
| goto out; |
| |
| ret = ti_sci_proc_set_config(&core->tsp, boot_vec, set_cfg, clr_cfg); |
| out: |
| ti_sci_proc_release(&core->tsp); |
| return ret; |
| } |
| |
| static int ti_sci_proc_of_to_priv(struct udevice *dev, struct ti_sci_proc *tsp) |
| { |
| u32 ids[2]; |
| int ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| tsp->sci = ti_sci_get_by_phandle(dev, "ti,sci"); |
| if (IS_ERR(tsp->sci)) { |
| dev_err(dev, "ti_sci get failed: %ld\n", PTR_ERR(tsp->sci)); |
| return PTR_ERR(tsp->sci); |
| } |
| |
| ret = dev_read_u32_array(dev, "ti,sci-proc-ids", ids, 2); |
| if (ret) { |
| dev_err(dev, "Proc IDs not populated %d\n", ret); |
| return ret; |
| } |
| |
| tsp->ops = &tsp->sci->ops.proc_ops; |
| tsp->proc_id = ids[0]; |
| tsp->host_id = ids[1]; |
| tsp->dev_id = dev_read_u32_default(dev, "ti,sci-dev-id", |
| TI_SCI_RESOURCE_NULL); |
| if (tsp->dev_id == TI_SCI_RESOURCE_NULL) { |
| dev_err(dev, "Device ID not populated %d\n", ret); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int k3_r5f_of_to_priv(struct k3_r5f_core *core) |
| { |
| int ret; |
| |
| dev_dbg(core->dev, "%s\n", __func__); |
| |
| core->atcm_enable = dev_read_u32_default(core->dev, "ti,atcm-enable", 0); |
| core->btcm_enable = dev_read_u32_default(core->dev, "ti,btcm-enable", 1); |
| core->loczrama = dev_read_u32_default(core->dev, "ti,loczrama", 1); |
| |
| ret = ti_sci_proc_of_to_priv(core->dev, &core->tsp); |
| if (ret) |
| return ret; |
| |
| ret = reset_get_by_index(core->dev, 0, &core->reset); |
| if (ret) { |
| dev_err(core->dev, "Reset lines not available: %d\n", ret); |
| return ret; |
| } |
| |
| core->ipdata = (struct k3_r5f_ip_data *)dev_get_driver_data(core->dev); |
| |
| return 0; |
| } |
| |
| static int k3_r5f_core_of_get_memories(struct k3_r5f_core *core) |
| { |
| static const char * const mem_names[] = {"atcm", "btcm"}; |
| struct udevice *dev = core->dev; |
| int i; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| core->num_mems = ARRAY_SIZE(mem_names); |
| core->mem = calloc(core->num_mems, sizeof(*core->mem)); |
| if (!core->mem) |
| return -ENOMEM; |
| |
| for (i = 0; i < core->num_mems; i++) { |
| core->mem[i].bus_addr = dev_read_addr_size_name(dev, |
| mem_names[i], |
| (fdt_addr_t *)&core->mem[i].size); |
| if (core->mem[i].bus_addr == FDT_ADDR_T_NONE) { |
| dev_err(dev, "%s bus address not found\n", |
| mem_names[i]); |
| return -EINVAL; |
| } |
| core->mem[i].cpu_addr = map_physmem(core->mem[i].bus_addr, |
| core->mem[i].size, |
| MAP_NOCACHE); |
| if (!strcmp(mem_names[i], "atcm")) { |
| core->mem[i].dev_addr = core->loczrama ? |
| 0 : K3_R5_TCM_DEV_ADDR; |
| } else { |
| core->mem[i].dev_addr = core->loczrama ? |
| K3_R5_TCM_DEV_ADDR : 0; |
| } |
| |
| dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n", |
| mem_names[i], &core->mem[i].bus_addr, |
| core->mem[i].size, core->mem[i].cpu_addr, |
| core->mem[i].dev_addr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Each R5F core within a typical R5FSS instance has a total of 64 KB of TCMs, |
| * split equally into two 32 KB banks between ATCM and BTCM. The TCMs from both |
| * cores are usable in Split-mode, but only the Core0 TCMs can be used in |
| * LockStep-mode. The newer revisions of the R5FSS IP maximizes these TCMs by |
| * leveraging the Core1 TCMs as well in certain modes where they would have |
| * otherwise been unusable (Eg: LockStep-mode on J7200 SoCs). This is done by |
| * making a Core1 TCM visible immediately after the corresponding Core0 TCM. |
| * The SoC memory map uses the larger 64 KB sizes for the Core0 TCMs, and the |
| * dts representation reflects this increased size on supported SoCs. The Core0 |
| * TCM sizes therefore have to be adjusted to only half the original size in |
| * Split mode. |
| */ |
| static void k3_r5f_core_adjust_tcm_sizes(struct k3_r5f_core *core) |
| { |
| struct k3_r5f_cluster *cluster = core->cluster; |
| |
| if (cluster->mode == CLUSTER_MODE_LOCKSTEP) |
| return; |
| |
| if (!core->ipdata->tcm_is_double) |
| return; |
| |
| if (core == cluster->cores[0]) { |
| core->mem[0].size /= 2; |
| core->mem[1].size /= 2; |
| |
| dev_dbg(core->dev, "adjusted TCM sizes, ATCM = 0x%zx BTCM = 0x%zx\n", |
| core->mem[0].size, core->mem[1].size); |
| } |
| } |
| |
| /** |
| * k3_r5f_probe() - Basic probe |
| * @dev: corresponding k3 remote processor device |
| * |
| * Return: 0 if all goes good, else appropriate error message. |
| */ |
| static int k3_r5f_probe(struct udevice *dev) |
| { |
| struct k3_r5f_cluster *cluster = dev_get_priv(dev->parent); |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| bool r_state; |
| int ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| core->dev = dev; |
| ret = k3_r5f_of_to_priv(core); |
| if (ret) |
| return ret; |
| |
| core->cluster = cluster; |
| /* Assume Primary core gets probed first */ |
| if (!cluster->cores[0]) |
| cluster->cores[0] = core; |
| else |
| cluster->cores[1] = core; |
| |
| ret = k3_r5f_core_of_get_memories(core); |
| if (ret) { |
| dev_err(dev, "Rproc getting internal memories failed\n"); |
| return ret; |
| } |
| |
| /* |
| * The PM functionality is not supported by the firmware during |
| * SPL execution with the separated DM firmware image. The following |
| * piece of code is not compiled in that case. |
| */ |
| if (!IS_ENABLED(CONFIG_K3_DM_FW)) { |
| ret = core->tsp.sci->ops.dev_ops.is_on(core->tsp.sci, |
| core->tsp.dev_id, |
| &r_state, &core->in_use); |
| if (ret) |
| return ret; |
| |
| if (core->in_use) { |
| dev_info(dev, "Core %d is already in use. No rproc commands work\n", |
| core->tsp.proc_id); |
| return 0; |
| } |
| |
| /* Make sure Local reset is asserted. Redundant? */ |
| reset_assert(&core->reset); |
| } |
| |
| ret = k3_r5f_rproc_configure(core); |
| if (ret) { |
| dev_err(dev, "rproc configure failed %d\n", ret); |
| return ret; |
| } |
| |
| k3_r5f_core_adjust_tcm_sizes(core); |
| |
| dev_dbg(dev, "Remoteproc successfully probed\n"); |
| |
| return 0; |
| } |
| |
| static int k3_r5f_remove(struct udevice *dev) |
| { |
| struct k3_r5f_core *core = dev_get_priv(dev); |
| |
| free(core->mem); |
| |
| ti_sci_proc_release(&core->tsp); |
| |
| return 0; |
| } |
| |
| static const struct k3_r5f_ip_data k3_data = { |
| .tcm_is_double = false, |
| .tcm_ecc_autoinit = false, |
| .is_single_core = false, |
| }; |
| |
| static const struct k3_r5f_ip_data j7200_j721s2_data = { |
| .tcm_is_double = true, |
| .tcm_ecc_autoinit = true, |
| .is_single_core = false, |
| }; |
| |
| static const struct k3_r5f_ip_data am62_data = { |
| .tcm_is_double = false, |
| .tcm_ecc_autoinit = false, |
| .is_single_core = true, |
| }; |
| |
| static const struct udevice_id k3_r5f_rproc_ids[] = { |
| { .compatible = "ti,am654-r5f", .data = (ulong)&k3_data, }, |
| { .compatible = "ti,j721e-r5f", .data = (ulong)&k3_data, }, |
| { .compatible = "ti,j7200-r5f", .data = (ulong)&j7200_j721s2_data, }, |
| { .compatible = "ti,j721s2-r5f", .data = (ulong)&j7200_j721s2_data, }, |
| { .compatible = "ti,am62-r5f", .data = (ulong)&am62_data, }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(k3_r5f_rproc) = { |
| .name = "k3_r5f_rproc", |
| .of_match = k3_r5f_rproc_ids, |
| .id = UCLASS_REMOTEPROC, |
| .ops = &k3_r5f_rproc_ops, |
| .probe = k3_r5f_probe, |
| .remove = k3_r5f_remove, |
| .priv_auto = sizeof(struct k3_r5f_core), |
| }; |
| |
| static int k3_r5f_cluster_probe(struct udevice *dev) |
| { |
| struct k3_r5f_cluster *cluster = dev_get_priv(dev); |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| cluster->mode = dev_read_u32_default(dev, "ti,cluster-mode", |
| CLUSTER_MODE_LOCKSTEP); |
| |
| if (device_is_compatible(dev, "ti,am62-r5fss")) { |
| cluster->mode = CLUSTER_MODE_SINGLECORE; |
| return 0; |
| } |
| |
| if (device_get_child_count(dev) != 2) { |
| dev_err(dev, "Invalid number of R5 cores"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "%s: Cluster successfully probed in %s mode\n", |
| __func__, cluster->mode ? "lockstep" : "split"); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id k3_r5fss_ids[] = { |
| { .compatible = "ti,am654-r5fss"}, |
| { .compatible = "ti,j721e-r5fss"}, |
| { .compatible = "ti,j7200-r5fss"}, |
| { .compatible = "ti,j721s2-r5fss"}, |
| { .compatible = "ti,am62-r5fss"}, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(k3_r5fss) = { |
| .name = "k3_r5fss", |
| .of_match = k3_r5fss_ids, |
| .id = UCLASS_MISC, |
| .probe = k3_r5f_cluster_probe, |
| .priv_auto = sizeof(struct k3_r5f_cluster), |
| .flags = DM_FLAG_DEFAULT_PD_CTRL_OFF, |
| }; |