riscv: qemu: add SPL configuration
Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL
enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The
configurations are meant to help the development of SPL on RISC-V.
The configurations enable RAM as the only SPL boot device. Images must
be loaded at address 0x80200000. In the default boot flow, U-Boot SPL
starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot
proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is
then started in supervisor mode by OpenSBI.
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig
index 6cc7c31..1928d6d 100644
--- a/board/emulation/qemu-riscv/Kconfig
+++ b/board/emulation/qemu-riscv/Kconfig
@@ -13,13 +13,21 @@
default "qemu-riscv"
config SYS_TEXT_BASE
+ default 0x81200000 if SPL
default 0x80000000 if !RISCV_SMODE
default 0x80200000 if RISCV_SMODE && ARCH_RV64I
default 0x80400000 if RISCV_SMODE && ARCH_RV32I
+config SPL_TEXT_BASE
+ default 0x80000000
+
+config SPL_OPENSBI_LOAD_ADDR
+ default 0x81000000
+
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select GENERIC_RISCV
+ select SUPPORT_SPL
imply SYS_NS16550
imply VIRTIO_MMIO
imply VIRTIO_NET
@@ -43,5 +51,7 @@
imply CMD_PCI
imply E1000
imply NVME
+ imply SPL_RAM_SUPPORT
+ imply SPL_RAM_DEVICE
endif
diff --git a/board/emulation/qemu-riscv/MAINTAINERS b/board/emulation/qemu-riscv/MAINTAINERS
index c701c83..78969ed 100644
--- a/board/emulation/qemu-riscv/MAINTAINERS
+++ b/board/emulation/qemu-riscv/MAINTAINERS
@@ -5,5 +5,7 @@
F: include/configs/qemu-riscv.h
F: configs/qemu-riscv32_defconfig
F: configs/qemu-riscv32_smode_defconfig
+F: configs/qemu-riscv32_spl_defconfig
F: configs/qemu-riscv64_defconfig
F: configs/qemu-riscv64_smode_defconfig
+F: configs/qemu-riscv64_spl_defconfig
diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c
index 49e304f..37d48d0 100644
--- a/board/emulation/qemu-riscv/qemu-riscv.c
+++ b/board/emulation/qemu-riscv/qemu-riscv.c
@@ -7,6 +7,7 @@
#include <dm.h>
#include <env.h>
#include <fdtdec.h>
+#include <spl.h>
#include <virtio_types.h>
#include <virtio.h>
@@ -88,3 +89,19 @@
return 0;
}
+
+#ifdef CONFIG_SPL
+u32 spl_boot_device(void)
+{
+ /* RISC-V QEMU only supports RAM as SPL boot device */
+ return BOOT_DEVICE_RAM;
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* boot using first FIT config */
+ return 0;
+}
+#endif
diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig
new file mode 100644
index 0000000..78e755b
--- /dev/null
+++ b/configs/qemu-riscv32_spl_defconfig
@@ -0,0 +1,11 @@
+CONFIG_RISCV=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_TARGET_QEMU_VIRT=y
+CONFIG_RISCV_SMODE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_CMD_MII is not set
+CONFIG_OF_PRIOR_STAGE=y
diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig
new file mode 100644
index 0000000..a3f5e29
--- /dev/null
+++ b/configs/qemu-riscv64_spl_defconfig
@@ -0,0 +1,12 @@
+CONFIG_RISCV=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_TARGET_QEMU_VIRT=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_CMD_MII is not set
+CONFIG_OF_PRIOR_STAGE=y
diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h
index ecea1d4..fa9b9af 100644
--- a/include/configs/qemu-riscv.h
+++ b/include/configs/qemu-riscv.h
@@ -8,6 +8,18 @@
#include <linux/sizes.h>
+#ifdef CONFIG_SPL
+
+#define CONFIG_SPL_MAX_SIZE 0x00100000
+#define CONFIG_SPL_BSS_START_ADDR 0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
+
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
+
+#endif
+
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
@@ -22,6 +34,7 @@
/* Environment options */
#define CONFIG_ENV_SIZE SZ_128K
+#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(QEMU, qemu, na) \
func(VIRTIO, virtio, 0) \
@@ -47,5 +60,6 @@
"pxefile_addr_r=0x88200000\0" \
"ramdisk_addr_r=0x88300000\0" \
BOOTENV
+#endif
#endif /* __CONFIG_H */