diff --git a/drivers/usb/host/dwc3-octeon-glue.c b/drivers/usb/host/dwc3-octeon-glue.c
new file mode 100644
index 0000000..39b3185
--- /dev/null
+++ b/drivers/usb/host/dwc3-octeon-glue.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Octeon family DWC3 specific glue layer
+ *
+ * Copyright (C) 2020 Stefan Roese <sr@denx.de>
+ *
+ * The low-level init code is based on the Linux driver octeon-usb.c by
+ * David Daney <david.daney@cavium.com>, which is:
+ * Copyright (C) 2010-2017 Cavium Networks
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <dm/lists.h>
+#include <dm/of_access.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/usb/dwc3.h>
+#include <linux/usb/otg.h>
+#include <mach/octeon-model.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CVMX_GPIO_BIT_CFGX(i)	(0x0001070000000900ull + ((i) * 8))
+#define CVMX_GPIO_XBIT_CFGX(i)	(0x0001070000000900ull + \
+				 ((i) & 31) * 8 - 8 * 16)
+
+#define GPIO_BIT_CFG_TX_OE		BIT_ULL(0)
+#define GPIO_BIT_CFG_OUTPUT_SEL		GENMASK_ULL(20, 16)
+
+#define UCTL_CTL_UCTL_RST		BIT_ULL(0)
+#define UCTL_CTL_UAHC_RST		BIT_ULL(1)
+#define UCTL_CTL_UPHY_RST		BIT_ULL(2)
+#define UCTL_CTL_DRD_MODE		BIT_ULL(3)
+#define UCTL_CTL_SCLK_EN		BIT_ULL(4)
+#define UCTL_CTL_HS_POWER_EN		BIT_ULL(12)
+#define UCTL_CTL_SS_POWER_EN		BIT_ULL(14)
+#define UCTL_CTL_H_CLKDIV_SEL		GENMASK_ULL(26, 24)
+#define UCTL_CTL_H_CLKDIV_RST		BIT_ULL(28)
+#define UCTL_CTL_H_CLK_EN		BIT_ULL(30)
+#define UCTL_CTL_REF_CLK_FSEL		GENMASK_ULL(37, 32)
+#define UCTL_CTL_REF_CLK_DIV2		BIT_ULL(38)
+#define UCTL_CTL_REF_SSP_EN		BIT_ULL(39)
+#define UCTL_CTL_MPLL_MULTIPLIER	GENMASK_ULL(46, 40)
+#define UCTL_CTL_SSC_EN			BIT_ULL(59)
+#define UCTL_CTL_REF_CLK_SEL		GENMASK_ULL(61, 60)
+
+#define UCTL_HOST_CFG			0xe0
+#define UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN BIT_ULL(24)
+#define UCTL_HOST_CFG_PPC_EN		BIT_ULL(25)
+
+#define UCTL_SHIM_CFG			0xe8
+#define UCTL_SHIM_CFG_CSR_ENDIAN_MODE	GENMASK_ULL(1, 0)
+#define UCTL_SHIM_CFG_DMA_ENDIAN_MODE	GENMASK_ULL(9, 8)
+
+#define OCTEON_H_CLKDIV_SEL		8
+#define OCTEON_MIN_H_CLK_RATE		150000000
+#define OCTEON_MAX_H_CLK_RATE		300000000
+
+#define CLOCK_50MHZ			50000000
+#define CLOCK_100MHZ			100000000
+#define CLOCK_125MHZ			125000000
+
+static u8 clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
+
+static int dwc3_octeon_config_power(struct udevice *dev, void __iomem *base)
+{
+	u64 uctl_host_cfg;
+	u64 gpio_bit;
+	u32 gpio_pwr[3];
+	int gpio, len, power_active_low;
+	const struct device_node *node = dev_np(dev);
+	int index = ((u64)base >> 24) & 1;
+	void __iomem *gpio_bit_cfg;
+
+	if (of_find_property(node, "power", &len)) {
+		if (len == 12) {
+			dev_read_u32_array(dev, "power", gpio_pwr, 3);
+			power_active_low = gpio_pwr[2] & 0x01;
+			gpio = gpio_pwr[1];
+		} else if (len == 8) {
+			dev_read_u32_array(dev, "power", gpio_pwr, 2);
+			power_active_low = 0;
+			gpio = gpio_pwr[1];
+		} else {
+			printf("dwc3 controller clock init failure\n");
+			return -EINVAL;
+		}
+
+		gpio_bit_cfg = ioremap(CVMX_GPIO_BIT_CFGX(gpio), 0);
+
+		if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+		     OCTEON_IS_MODEL(OCTEON_CNF75XX)) && gpio <= 31) {
+			gpio_bit = ioread64(gpio_bit_cfg);
+			gpio_bit |= GPIO_BIT_CFG_TX_OE;
+			gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+			gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+					       index == 0 ? 0x14 : 0x15);
+			iowrite64(gpio_bit, gpio_bit_cfg);
+		} else if (gpio <= 15) {
+			gpio_bit = ioread64(gpio_bit_cfg);
+			gpio_bit |= GPIO_BIT_CFG_TX_OE;
+			gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+			gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+					       index == 0 ? 0x14 : 0x19);
+			iowrite64(gpio_bit, gpio_bit_cfg);
+		} else {
+			gpio_bit_cfg = ioremap(CVMX_GPIO_XBIT_CFGX(gpio), 0);
+
+			gpio_bit = ioread64(gpio_bit_cfg);
+			gpio_bit |= GPIO_BIT_CFG_TX_OE;
+			gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+			gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+					       index == 0 ? 0x14 : 0x19);
+			iowrite64(gpio_bit, gpio_bit_cfg);
+		}
+
+		/* Enable XHCI power control and set if active high or low. */
+		uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
+		uctl_host_cfg |= UCTL_HOST_CFG_PPC_EN;
+		if (power_active_low)
+			uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+		else
+			uctl_host_cfg |= UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+		iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
+
+		/* Wait for power to stabilize */
+		mdelay(10);
+	} else {
+		/* Disable XHCI power control and set if active high. */
+		uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
+		uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_EN;
+		uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+		iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
+		dev_warn(dev, "dwc3 controller clock init failure.\n");
+	}
+
+	return 0;
+}
+
+static int dwc3_octeon_clocks_start(struct udevice *dev, void __iomem *base)
+{
+	u64 uctl_ctl;
+	int ref_clk_sel = 2;
+	u64 div;
+	u32 clock_rate;
+	int mpll_mul;
+	int i;
+	u64 h_clk_rate;
+	void __iomem *uctl_ctl_reg = base;
+	const char *ss_clock_type;
+	const char *hs_clock_type;
+
+	i = dev_read_u32(dev, "refclk-frequency", &clock_rate);
+	if (i) {
+		printf("No UCTL \"refclk-frequency\"\n");
+		return -EINVAL;
+	}
+
+	ss_clock_type = dev_read_string(dev, "refclk-type-ss");
+	if (!ss_clock_type) {
+		printf("No UCTL \"refclk-type-ss\"\n");
+		return -EINVAL;
+	}
+
+	hs_clock_type = dev_read_string(dev, "refclk-type-hs");
+	if (!hs_clock_type) {
+		printf("No UCTL \"refclk-type-hs\"\n");
+		return -EINVAL;
+	}
+
+	if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
+		if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) {
+			ref_clk_sel = 0;
+		} else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
+			ref_clk_sel = 2;
+		} else {
+			printf("Invalid HS clock type %s, using pll_ref_clk\n",
+			       hs_clock_type);
+		}
+	} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
+		if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) {
+			ref_clk_sel = 1;
+		} else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
+			ref_clk_sel = 3;
+		} else {
+			printf("Invalid HS clock type %s, using pll_ref_clk\n",
+			       hs_clock_type);
+			ref_clk_sel = 3;
+		}
+	} else {
+		printf("Invalid SS clock type %s, using dlmc_ref_clk0\n",
+		       ss_clock_type);
+	}
+
+	if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
+	    clock_rate != CLOCK_100MHZ)
+		printf("Invalid UCTL clock rate of %u\n", clock_rate);
+
+	/*
+	 * Step 1: Wait for all voltages to be stable...that surely
+	 *         happened before this driver is started. SKIP
+	 */
+
+	/* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
+
+	/* Step 3: Assert all resets. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl |= UCTL_CTL_UCTL_RST | UCTL_CTL_UAHC_RST | UCTL_CTL_UPHY_RST;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 4a: Reset the clock dividers. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl |= UCTL_CTL_H_CLKDIV_RST;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 4b: Select controller clock frequency. */
+	for (div = ARRAY_SIZE(clk_div) - 1; div >= 0; div--) {
+		h_clk_rate = gd->bus_clk / clk_div[div];
+		if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
+		    h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
+			break;
+	}
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_H_CLKDIV_SEL;
+	uctl_ctl |= FIELD_PREP(UCTL_CTL_H_CLKDIV_SEL, div);
+	uctl_ctl |= UCTL_CTL_H_CLK_EN;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	if (div != FIELD_GET(UCTL_CTL_H_CLKDIV_SEL, uctl_ctl) ||
+	    !(uctl_ctl & UCTL_CTL_H_CLK_EN)) {
+		printf("dwc3 controller clock init failure\n");
+		return -EINVAL;
+	}
+
+	/* Step 4c: Deassert the controller clock divider reset. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_H_CLKDIV_RST;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 5a: Reference clock configuration. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_REF_CLK_SEL;
+	uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
+	uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
+	uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x07);
+	uctl_ctl &= ~UCTL_CTL_REF_CLK_DIV2;
+
+	switch (clock_rate) {
+	default:
+		printf("Invalid ref_clk %u, using %u instead\n", CLOCK_100MHZ,
+		       clock_rate);
+		fallthrough;
+	case CLOCK_100MHZ:
+		mpll_mul = 0x19;
+		if (ref_clk_sel < 2) {
+			uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
+			uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x27);
+		}
+		break;
+	case CLOCK_50MHZ:
+		mpll_mul = 0x32;
+		break;
+	case CLOCK_125MHZ:
+		mpll_mul = 0x28;
+		break;
+	}
+	uctl_ctl &= ~UCTL_CTL_MPLL_MULTIPLIER;
+	uctl_ctl |= FIELD_PREP(UCTL_CTL_MPLL_MULTIPLIER, mpll_mul);
+
+	/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
+	uctl_ctl |= UCTL_CTL_SSC_EN;
+
+	/* Step 5c: Enable SuperSpeed. */
+	uctl_ctl |= UCTL_CTL_REF_SSP_EN;
+
+	/* Step 5d: Configure PHYs. SKIP */
+
+	/* Step 6a & 6b: Power up PHYs. */
+	uctl_ctl |= UCTL_CTL_HS_POWER_EN;
+	uctl_ctl |= UCTL_CTL_SS_POWER_EN;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 7: Wait 10 controller-clock cycles to take effect. */
+	udelay(10);
+
+	/* Step 8a: Deassert UCTL reset signal. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_UCTL_RST;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 8b: Wait 10 controller-clock cycles. */
+	udelay(10);
+
+	/* Step 8c: Setup power-power control. */
+	if (dwc3_octeon_config_power(dev, base)) {
+		printf("Error configuring power\n");
+		return -EINVAL;
+	}
+
+	/* Step 8d: Deassert UAHC reset signal. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_UAHC_RST;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 8e: Wait 10 controller-clock cycles. */
+	udelay(10);
+
+	/* Step 9: Enable conditional coprocessor clock of UCTL. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl |= UCTL_CTL_SCLK_EN;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	/* Step 10: Set for host mode only. */
+	uctl_ctl = ioread64(uctl_ctl_reg);
+	uctl_ctl &= ~UCTL_CTL_DRD_MODE;
+	iowrite64(uctl_ctl, uctl_ctl_reg);
+
+	return 0;
+}
+
+static void dwc3_octeon_set_endian_mode(void __iomem *base)
+{
+	u64 shim_cfg;
+
+	shim_cfg = ioread64(base + UCTL_SHIM_CFG);
+	shim_cfg &= ~UCTL_SHIM_CFG_CSR_ENDIAN_MODE;
+	shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1);
+	shim_cfg &= ~UCTL_SHIM_CFG_DMA_ENDIAN_MODE;
+	shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1);
+	iowrite64(shim_cfg, base + UCTL_SHIM_CFG);
+}
+
+static void dwc3_octeon_phy_reset(void __iomem *base)
+{
+	u64 uctl_ctl;
+
+	uctl_ctl = ioread64(base);
+	uctl_ctl &= ~UCTL_CTL_UPHY_RST;
+	iowrite64(uctl_ctl, base);
+}
+
+static int octeon_dwc3_glue_probe(struct udevice *dev)
+{
+	void __iomem *base;
+
+	base = dev_remap_addr(dev);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dwc3_octeon_clocks_start(dev, base);
+	dwc3_octeon_set_endian_mode(base);
+	dwc3_octeon_phy_reset(base);
+
+	return 0;
+}
+
+static int octeon_dwc3_glue_bind(struct udevice *dev)
+{
+	ofnode node, dwc3_node;
+
+	/* Find snps,dwc3 node from subnode */
+	dwc3_node = ofnode_null();
+	ofnode_for_each_subnode(node, dev->node) {
+		if (ofnode_device_is_compatible(node, "snps,dwc3"))
+			dwc3_node = node;
+	}
+
+	if (!ofnode_valid(dwc3_node)) {
+		printf("Can't find dwc3 subnode for %s\n", dev->name);
+		return -ENODEV;
+	}
+
+	return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id octeon_dwc3_glue_ids[] = {
+	{ .compatible = "cavium,octeon-7130-usb-uctl" },
+	{ }
+};
+
+U_BOOT_DRIVER(dwc3_octeon_glue) = {
+	.name = "dwc3_octeon_glue",
+	.id = UCLASS_NOP,
+	.of_match = octeon_dwc3_glue_ids,
+	.probe = octeon_dwc3_glue_probe,
+	.bind = octeon_dwc3_glue_bind,
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};