// SPDX-License-Identifier: GPL-2.0
/*
 * dts file for Xilinx ZynqMP VM-P-M1369-00
 *
 * Copyright (C) 2024, Advanced Micro Devices, Inc.
 *
 * Michal Simek <michal.simek@amd.com>
 */

#include <dt-bindings/gpio/gpio.h>

/dts-v1/;
/plugin/;

&{/} {
	compatible = "xlnx,zynqmp-sc-vm-p-m1369-revA",
		     "xlnx,zynqmp-sc-vm-p-m1369", "xlnx,zynqmp";

	ina226-u19 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_soc_ina 0>, <&vcc_soc_ina 1>, <&vcc_soc_ina 2>;
	};
	ina226-u287 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_ram_ina 0>, <&vcc_ram_ina 1>, <&vcc_ram_ina 2>;
	};
	ina226-u288 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_pslp_ina 0>, <&vcc_pslp_ina 1>, <&vcc_pslp_ina 2>;
	};
	ina226-u289 {
		compatible = "iio-hwmon";
		io-channels = <&vccaux_ina 0>, <&vccaux_ina 1>, <&vccaux_ina 2>;
	};
	ina226-u290 {
		compatible = "iio-hwmon";
		io-channels = <&vccaux_pmc_ina 0>, <&vccaux_pmc_ina 1>, <&vccaux_pmc_ina 2>;
	};
	ina226-u291 {
		compatible = "iio-hwmon";
		io-channels = <&vcco_500_ina 0>, <&vcco_500_ina 1>, <&vcco_500_ina 2>;
	};
	ina226-u292 {
		compatible = "iio-hwmon";
		io-channels = <&vcco_501_ina 0>, <&vcco_501_ina 1>, <&vcco_501_ina 2>;
	};
	ina226-u293 {
		compatible = "iio-hwmon";
		io-channels = <&vcco_502_ina 0>, <&vcco_502_ina 1>, <&vcco_502_ina 2>;
	};
	ina226-u294 {
		compatible = "iio-hwmon";
		io-channels = <&vcco_503_ina 0>, <&vcco_503_ina 1>, <&vcco_503_ina 2>;
	};
	ina226-u295 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_ddr5_rdimm_ina 0>, <&vcc_ddr5_rdimm_ina 1>, <&vcc_ddr5_rdimm_ina 2>;
	};
	ina226-u298 {
		compatible = "iio-hwmon";
		io-channels = <&lp5_1v0_ina 0>, <&lp5_1v0_ina 1>, <&lp5_1v0_ina 2>;
	};
	ina226-u296 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_fmc_ina 0>, <&vcc_fmc_ina 1>, <&vcc_fmc_ina 2>;
	};
	ina226-u299 {
		compatible = "iio-hwmon";
		io-channels = <&gtm_avcc_ina 0>, <&gtm_avcc_ina 1>, <&gtm_avcc_ina 2>;
	};
	ina226-u300 {
		compatible = "iio-hwmon";
		io-channels = <&gtm_avtt_ina 0>, <&gtm_avtt_ina 1>, <&gtm_avtt_ina 2>;
	};
	ina226-u301 {
		compatible = "iio-hwmon";
		io-channels = <&gtm_avccaux_ina 0>, <&gtm_avccaux_ina 1>, <&gtm_avccaux_ina 2>;
	};
	ina226-u297 {
		compatible = "iio-hwmon";
		io-channels = <&vcc_mipi_ina 0>, <&vcc_mipi_ina 1>, <&vcc_mipi_ina 2>;
	};
};

&i2c1 { /* i2c_main bus */
	#address-cells = <1>;
	#size-cells = <0>;

	/* u97 eeprom at 0x54 described in sc-revB - WP protection via BOARD_EEPROM_WP - J1801 */

	/* i2c_main_1 - u72 - j108 - disable translation, add 8 */
	/* J133 - OE for u91@55 + 8 - 161,132813MHz - QSFP56G_0 */
	qsfp56g_0_clk: clock-controller@5d {
		compatible = "renesas,proxo-xp";
		reg = <0x5d>;
		#clock-cells = <0>;
		clock-output-names = "qsfp56g_0_clk";
	};

	/* J134 - OE for u92@57 + 8 - 322,265625MHz - QSFP56G_1 */
	qsfp56g_1_clk: clock-controller@5f {
		compatible = "renesas,proxo-xp";
		reg = <0x5f>;
		#clock-cells = <0>;
		clock-output-names = "qsfp56g_1_clk";
	};

	/* i2c_main_2 - u74 - j110 - disable translation, add 9 */
	/* J210 - OE for u164@50 + 9 - 320MHz - CH2_LP5 */
	ch2_lpddr5_refclk: clock-controller@59 {
		compatible = "renesas,proxo-xp";
		reg = <0x59>;
		#clock-cells = <0>;
		clock-output-names = "ch2_lpddr5_refclk";
	};

	/* i2c_main_3 - u76 - j112 - disable translation, add 6 */
	/* J231 - OE for u165@50 + 6  - 320MHz - _RDIMM */
	ddr5_dimm1_refclk: clock-controller@56 {
		compatible = "renesas,proxo-xp";
		reg = <0x56>;
		#clock-cells = <0>;
		clock-output-names = "ddr5_udimm_refclk";
	};

	/* i2c_main_4 - u73 - j109 - disable translation, add 5 */
	/* J117 - OE for u82@50 + 5 - 33,3333MHz - PS_REFCLK */
	ps_refclk: clock-controller@55 {
		compatible = "renesas,proxo-xp";
		reg = <0x55>;
		#clock-cells = <0>;
		clock-output-names = "ps_refclk";
	};

	/* J71 - selection to LP_I2C_SCL_J or LP_I2C_PMC_SCL_J */
	/* J70 - selection to LP_I2C_SDA_J or LP_I2C_PMC_SDA_J */
	/* this should be SW controlable too */
};

&i2c0 {
	#address-cells = <1>;
	#size-cells = <0>;

	/* u134 tps544b25 but connected to J178 connector */
	/* u48/IMx3112/0x77 -  1:2 multiplexer - also accessed from Versal NET */
	/* Connection DDR5_UDIMM - SPD can be from 0x50-0x57 */
	/* FIXME gpio should handle SYSCTLR_PMBUS_ALERT and also INA226_PMBUS_ALERT */
	/* Access to i2c_pmc bus via u49 with OE j100 or via SYSCTLR_I2C_PMC_EN */

	/* ina226_pmbus - J103 - disable INA226_PMBUS */
	vcc_soc_ina: power-monitor@40 { /* u19 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x40>;
		shunt-resistor = <1000>; /* R222 */
	};

	vcc_ram_ina: power-monitor@41 { /* u287 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x41>;
		shunt-resistor = <1000>; /* R32981 */
	};

	vcc_pslp_ina: power-monitor@42 { /* u288 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x42>;
		shunt-resistor = <1000>; /* R32984 */
	};

	vccaux_ina: power-monitor@43 { /* u289 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x43>;
		shunt-resistor = <1000>; /* R32987 */
	};

	vccaux_pmc_ina: power-monitor@44 { /* u290 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x44>;
		shunt-resistor = <1000>; /* R32990 */
	};

	vcco_500_ina: power-monitor@45 { /* u291 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x45>;
		shunt-resistor = <1000>; /* R32993 */
	};

	vcco_501_ina: power-monitor@46 { /* u292 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x46>;
		shunt-resistor = <1000>; /* R32996 */
	};

	vcco_502_ina: power-monitor@47 { /* u293 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x47>;
		shunt-resistor = <1000>; /* R32999 */
	};

	vcco_503_ina: power-monitor@48 { /* u294 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x48>;
		shunt-resistor = <1000>; /* R33002 */
	};

	vcc_ddr5_rdimm_ina: power-monitor@49 { /* u295 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x49>;
		shunt-resistor = <1000>; /* R33005 */
	};

	lp5_1v0_ina: power-monitor@4a { /* u298 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4a>;
		shunt-resistor = <1000>; /* R33014 */
	};

	vcc_fmc_ina: power-monitor@4b { /* u296 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4b>;
		shunt-resistor = <1000>; /* R33008 */
	};

	gtm_avcc_ina: power-monitor@4c { /* u299 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4c>;
		shunt-resistor = <1000>; /* R33017 */
	};

	gtm_avtt_ina: power-monitor@4d { /* u300 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4d>;
		shunt-resistor = <1000>; /* R33020 */
	};

	gtm_avccaux_ina: power-monitor@4e { /* u301 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4e>;
		shunt-resistor = <1000>; /* R33023 */
	};

	vcc_mipi_ina: power-monitor@4f { /* u297 */
		compatible = "ti,ina226";
		#io-channel-cells = <1>;
		reg = <0x4f>;
		shunt-resistor = <1000>; /* R33011 */
	};

	/* pmbus - j105 - disable main PMBUS - also going to j102 connector */
	vcc_pslp: regulator@15 { /* u24 */
		compatible = "ti,tps546b24a";
		reg = <0x15>;
	};

	vccaux_pmc: regulator@17 { /* u26 */
		compatible = "ti,tps546b24a";
		reg = <0x17>;
	};

	vcco_500: regulator@18 { /* u27 */
		compatible = "ti,tps546b24a";
		reg = <0x18>;
	};

	vcco_501: regulator@19 { /* u28 */
		compatible = "ti,tps546b24a";
		reg = <0x19>;
	};

	vcco_502: regulator@1a { /* u29 */
		compatible = "ti,tps546b24a";
		reg = <0x1a>;
	};

	vcco_503: regulator@1b { /* u30 */
		compatible = "ti,tps546b24a";
		reg = <0x1b>;
	};

	vcc_ddr5_rdimm: regulator@1c { /* u31 */
		compatible = "ti,tps546b24a";
		reg = <0x1c>;
	};

	gtm_avcc: regulator@22 { /* u37 */
		compatible = "ti,tps546b24a";
		reg = <0x22>;
	};

	gtm_avtt: regulator@20 { /* u38 */
		compatible = "ti,tps546b24a";
		reg = <0x20>;
	};

	gtm_avccaux: regulator@21 { /* u39 */
		compatible = "ti,tps546b24a";
		reg = <0x21>;
	};

	vccint_gt: regulator@2a { /* u44 */
		compatible = "ti,tps546b24a";
		reg = <0x2a>;
	};

	util_1v8: regulator@2b { /* u1839 */
		compatible = "ti,tps546b24a";
		reg = <0x2b>;
	};

	vcc_pmc: regulator@2c { /* u46 */
		compatible = "ti,tps546b24a";
		reg = <0x2c>;
	};

	/* pmbus via U62 as ext_pmbus - disable via j104 */
	vccint: regulator@10 { /* u18 */
		compatible = "ti,tps546b24";
		reg = <0x10>;
	};

	vccsoc: regulator@11 { /* u20 */
		compatible = "ti,tps546b24";
		reg = <0x11>;
	};

	vcc_io: regulator@12 { /* u21 */
		compatible = "ti,tps546b24";
		reg = <0x12>;
	};

	vcc_psfp: regulator@13 { /* u22 */
		compatible = "ti,tps546b24";
		reg = <0x13>;
	};

	vcc_ram: regulator@14 { /* u23 */
		compatible = "ti,tps546b24";
		reg = <0x14>;
	};

	vccaux: regulator@16 { /* u25 */
		compatible = "ti,tps546b24";
		reg = <0x16>;
	};

	lp5_1v0: regulator@1d { /* u32 */
		compatible = "ti,tps546b24";
		reg = <0x1d>;
	};

	vcc_fmc: regulator@1e { /* u33 */
		compatible = "ti,tps546b24";
		reg = <0x1e>;
	};

	lp5_vdd1: regulator@25 { /* u40 */
		compatible = "ti,tps546b24";
		reg = <0x25>;
	};

	lp5_vdd2: regulator@26 { /* u41 */
		compatible = "ti,tps546b24";
		reg = <0x26>;
	};

	lp5_vddq: regulator@27 { /* u42 */
		compatible = "ti,tps546b24";
		reg = <0x27>;
	};

	vcco_hdio: regulator@29 { /* u43 */
		compatible = "ti,tps546b24";
		reg = <0x29>;
	};

	vcc_mipi: regulator@1f { /* u47 */
		compatible = "ti,tps546b24";
		reg = <0x1f>;
	};

	/* connected via J425 connector
	 ucd90320: power-sequencer@73 { // u16
		compatible = "ti,ucd90320";
		reg = <0x73>;
	};*/
};