diff --git a/arch/arm/mach-sc5xx/sc59x_64.c b/arch/arm/mach-sc5xx/sc59x_64.c
new file mode 100644
index 0000000..82537bf
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc59x_64.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Contact: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
+ * Contact: Greg Malysa <greg.malysa@timesys.com>
+ */
+
+#include <asm/io.h>
+#include <asm/arch-adi/sc5xx/sc5xx.h>
+#include <asm/arch-adi/sc5xx/spl.h>
+
+#define REG_TSGENWR0_CNTCR 0x310AE000
+#define REG_PADS0_PCFG0 0x31004604
+#define REG_RCU0_BCODE 0x3108C028
+
+#define REG_SPU0_SECUREP_START 0x3108BA00
+#define REG_SPU0_WP_START 0x3108B400
+#define REG_SPU0_SECUREC0 0x3108B980
+
+#define REG_SCB5_SPI2_OSPI_REMAP 0x30400000
+#define BITM_SCB5_SPI2_OSPI_REMAP_REMAP 0x00000003
+#define ENUM_SCB5_SPI2_OSPI_REMAP_OSPI0 0x00000001
+
+adi_rom_boot_fn adi_rom_boot = (adi_rom_boot_fn)0x000000e4;
+
+void sc5xx_enable_rgmii(void)
+{
+	writel((readl(REG_PADS0_PCFG0) | 0xc), REG_PADS0_PCFG0);
+
+	// Set dw for little endian operation as well
+	writel(readl(REG_PADS0_PCFG0) & ~(1 << 19), REG_PADS0_PCFG0);
+	writel(readl(REG_PADS0_PCFG0) & ~(1 << 20), REG_PADS0_PCFG0);
+}
+
+void sc59x_remap_ospi(void)
+{
+	clrsetbits_le32(REG_SCB5_SPI2_OSPI_REMAP,
+			BITM_SCB5_SPI2_OSPI_REMAP_REMAP,
+			ENUM_SCB5_SPI2_OSPI_REMAP_OSPI0);
+}
+
+/**
+ * SPU/SMPU configuration is the default for permissive access from non-secure
+ * EL1. If TFA and OPTEE are configured, they run *after* this code, as the
+ * current boot flow is SPL -> TFA -> OPTEE -> Proper -> Linux, and will
+ * be expected to configure peripheral security correctly. If they are not
+ * configured, then this permissive setting will allow Linux (which always
+ * runs in NS EL1) to control all access to these peripherals. Without it,
+ * the peripherals would simply be unavailable in a non-security build,
+ * which is not OK.
+ */
+void sc5xx_soc_init(void)
+{
+	phys_addr_t smpus[] = {
+		0x31007800, //SMPU0
+		0x31083800, //SMPU2
+		0x31084800, //SMPU3
+		0x31085800, //SMPU4
+		0x31086800, //SMPU5
+		0x31087800, //SMPU6
+		0x310A0800, //SMPU9
+		0x310A1800, //SMPU11
+		0x31012800, //SMPU12
+	};
+	size_t i;
+
+	// Enable coresight timer
+	writel(1, REG_TSGENWR0_CNTCR);
+
+	//Do not rerun preboot routine --
+	// Without this, hardware resets triggered by RCU0_CTL:SYSRST
+	// lead to a deadlock somewhere in the boot ROM
+	writel(0x200, REG_RCU0_BCODE);
+
+	/* Alter outstanding transactions property of A55*/
+	writel(0x1, 0x30643108); /* SCB6 A55 M0 Ib.fn Mod */
+	isb();
+
+	/* configure DDR prefetch behavior, per ADI */
+	writel(0x1, 0x31076000);
+
+	/* configure smart mode, per ADI */
+	writel(0x1307, 0x31076004);
+
+	// Disable SPU and SPU WP registers
+	sc5xx_disable_spu0(REG_SPU0_SECUREP_START, REG_SPU0_SECUREP_START + 4*213);
+	sc5xx_disable_spu0(REG_SPU0_WP_START, REG_SPU0_WP_START + 4*213);
+
+	/* configure smpus permissively */
+	for (i = 0; i < ARRAY_SIZE(smpus); ++i)
+		writel(0x500, smpus[i]);
+
+	sc5xx_enable_ns_sharc_access(REG_SPU0_SECUREC0);
+}