diff --git a/doc/README.mx28_common b/doc/README.mx28_common
index 448d221..f73978d 100644
--- a/doc/README.mx28_common
+++ b/doc/README.mx28_common
@@ -19,6 +19,7 @@
 1) Prerequisites
 2) Compiling U-Boot for a MX28 based board
 3) Installation of U-Boot for a MX28 based board to SD card
+4) Installation of U-Boot into NAND flash
 
 1) Prerequisites
 ----------------
@@ -146,8 +147,8 @@
       a "-p" switch for that purpose. The "-p" switch takes the sector number as
       an argument.
 
-4) Installation of U-Boot for NAND flash
------------------------------------------------
+4) Installation of U-Boot into NAND flash
+-----------------------------------------
 
 To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28
 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.