test/py: Shorten u_boot_console
This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.
But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.
It would be too confusing to use con as it would be confused with
config and it is probably too short.
So shorten it to 'ubman'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/
diff --git a/test/py/tests/test_zynq_secure.py b/test/py/tests/test_zynq_secure.py
index 0ee5aeb..0261d62 100644
--- a/test/py/tests/test_zynq_secure.py
+++ b/test/py/tests/test_zynq_secure.py
@@ -36,8 +36,8 @@
}
"""
-def zynq_secure_pre_commands(u_boot_console):
- output = u_boot_console.run_command('print modeboot')
+def zynq_secure_pre_commands(ubman):
+ output = ubman.run_command('print modeboot')
if not 'modeboot=' in output:
pytest.skip('bootmode cannnot be determined')
m = re.search('modeboot=(.+?)boot', output)
@@ -48,8 +48,8 @@
pytest.skip('skipping due to jtag bootmode')
@pytest.mark.buildconfigspec('cmd_zynq_aes')
-def test_zynq_aes_image(u_boot_console):
- f = u_boot_console.config.env.get('env__zynq_aes_readable_file', None)
+def test_zynq_aes_image(ubman):
+ f = ubman.config.env.get('env__zynq_aes_readable_file', None)
if not f:
pytest.skip('No TFTP readable file for zynq secure aes case to read')
@@ -61,130 +61,130 @@
if not dstsize:
pytest.skip('No dstlen specified in env file to read')
- zynq_secure_pre_commands(u_boot_console)
- test_net.test_net_dhcp(u_boot_console)
+ zynq_secure_pre_commands(ubman)
+ test_net.test_net_dhcp(ubman)
if not test_net.net_set_up:
- test_net.test_net_setup_static(u_boot_console)
+ test_net.test_net_setup_static(ubman)
srcaddr = f.get('srcaddr', None)
if not srcaddr:
- addr = u_boot_utils.find_ram_base(u_boot_console)
+ addr = u_boot_utils.find_ram_base(ubman)
expected_tftp = 'Bytes transferred = '
fn = f['fn']
- output = u_boot_console.run_command('tftpboot %x %s' % (srcaddr, fn))
+ output = ubman.run_command('tftpboot %x %s' % (srcaddr, fn))
assert expected_tftp in output
expected_op = 'zynq aes [operation type] <srcaddr>'
- output = u_boot_console.run_command(
+ output = ubman.run_command(
'zynq aes %x $filesize %x %x' % (srcaddr, dstaddr, dstsize)
)
assert expected_op not in output
- output = u_boot_console.run_command('echo $?')
+ output = ubman.run_command('echo $?')
assert output.endswith('0')
@pytest.mark.buildconfigspec('cmd_zynq_aes')
-def test_zynq_aes_bitstream(u_boot_console):
- f = u_boot_console.config.env.get('env__zynq_aes_readable_file', None)
+def test_zynq_aes_bitstream(ubman):
+ f = ubman.config.env.get('env__zynq_aes_readable_file', None)
if not f:
pytest.skip('No TFTP readable file for zynq secure aes case to read')
- zynq_secure_pre_commands(u_boot_console)
- test_net.test_net_dhcp(u_boot_console)
+ zynq_secure_pre_commands(ubman)
+ test_net.test_net_dhcp(ubman)
if not test_net.net_set_up:
- test_net.test_net_setup_static(u_boot_console)
+ test_net.test_net_setup_static(ubman)
srcaddr = f.get('srcaddr', None)
if not srcaddr:
- addr = u_boot_utils.find_ram_base(u_boot_console)
+ addr = u_boot_utils.find_ram_base(ubman)
expected_tftp = 'Bytes transferred = '
fn = f['fnbit']
- output = u_boot_console.run_command('tftpboot %x %s' % (srcaddr, fn))
+ output = ubman.run_command('tftpboot %x %s' % (srcaddr, fn))
assert expected_tftp in output
expected_op = 'zynq aes [operation type] <srcaddr>'
- output = u_boot_console.run_command(
+ output = ubman.run_command(
'zynq aes load %x $filesize' % (srcaddr)
)
assert expected_op not in output
- output = u_boot_console.run_command('echo $?')
+ output = ubman.run_command('echo $?')
assert output.endswith('0')
@pytest.mark.buildconfigspec('cmd_zynq_aes')
-def test_zynq_aes_partial_bitstream(u_boot_console):
- f = u_boot_console.config.env.get('env__zynq_aes_readable_file', None)
+def test_zynq_aes_partial_bitstream(ubman):
+ f = ubman.config.env.get('env__zynq_aes_readable_file', None)
if not f:
pytest.skip('No TFTP readable file for zynq secure aes case to read')
- zynq_secure_pre_commands(u_boot_console)
- test_net.test_net_dhcp(u_boot_console)
+ zynq_secure_pre_commands(ubman)
+ test_net.test_net_dhcp(ubman)
if not test_net.net_set_up:
- test_net.test_net_setup_static(u_boot_console)
+ test_net.test_net_setup_static(ubman)
srcaddr = f.get('srcaddr', None)
if not srcaddr:
- addr = u_boot_utils.find_ram_base(u_boot_console)
+ addr = u_boot_utils.find_ram_base(ubman)
expected_tftp = 'Bytes transferred = '
fn = f['fnpbit']
- output = u_boot_console.run_command('tftpboot %x %s' % (srcaddr, fn))
+ output = ubman.run_command('tftpboot %x %s' % (srcaddr, fn))
assert expected_tftp in output
expected_op = 'zynq aes [operation type] <srcaddr>'
- output = u_boot_console.run_command('zynq aes loadp %x $filesize' % (srcaddr))
+ output = ubman.run_command('zynq aes loadp %x $filesize' % (srcaddr))
assert expected_op not in output
- output = u_boot_console.run_command('echo $?')
+ output = ubman.run_command('echo $?')
assert output.endswith('0')
@pytest.mark.buildconfigspec('cmd_zynq_rsa')
-def test_zynq_rsa_image(u_boot_console):
- f = u_boot_console.config.env.get('env__zynq_rsa_readable_file', None)
+def test_zynq_rsa_image(ubman):
+ f = ubman.config.env.get('env__zynq_rsa_readable_file', None)
if not f:
pytest.skip('No TFTP readable file for zynq secure rsa case to read')
- zynq_secure_pre_commands(u_boot_console)
- test_net.test_net_dhcp(u_boot_console)
+ zynq_secure_pre_commands(ubman)
+ test_net.test_net_dhcp(ubman)
if not test_net.net_set_up:
- test_net.test_net_setup_static(u_boot_console)
+ test_net.test_net_setup_static(ubman)
srcaddr = f.get('srcaddr', None)
if not srcaddr:
- addr = u_boot_utils.find_ram_base(u_boot_console)
+ addr = u_boot_utils.find_ram_base(ubman)
expected_tftp = 'Bytes transferred = '
fn = f['fn']
- output = u_boot_console.run_command('tftpboot %x %s' % (srcaddr, fn))
+ output = ubman.run_command('tftpboot %x %s' % (srcaddr, fn))
assert expected_tftp in output
expected_op = 'zynq rsa <baseaddr>'
- output = u_boot_console.run_command('zynq rsa %x ' % (srcaddr))
+ output = ubman.run_command('zynq rsa %x ' % (srcaddr))
assert expected_op not in output
- output = u_boot_console.run_command('echo $?')
+ output = ubman.run_command('echo $?')
assert output.endswith('0')
@pytest.mark.buildconfigspec('cmd_zynq_rsa')
-def test_zynq_rsa_image_invalid(u_boot_console):
- f = u_boot_console.config.env.get('env__zynq_rsa_readable_file', None)
+def test_zynq_rsa_image_invalid(ubman):
+ f = ubman.config.env.get('env__zynq_rsa_readable_file', None)
if not f:
pytest.skip('No TFTP readable file for zynq secure rsa case to read')
- zynq_secure_pre_commands(u_boot_console)
- test_net.test_net_dhcp(u_boot_console)
+ zynq_secure_pre_commands(ubman)
+ test_net.test_net_dhcp(ubman)
if not test_net.net_set_up:
- test_net.test_net_setup_static(u_boot_console)
+ test_net.test_net_setup_static(ubman)
srcaddr = f.get('srcaddr', None)
if not srcaddr:
- addr = u_boot_utils.find_ram_base(u_boot_console)
+ addr = u_boot_utils.find_ram_base(ubman)
expected_tftp = 'Bytes transferred = '
fninvalid = f['fninvalid']
- output = u_boot_console.run_command('tftpboot %x %s' % (srcaddr, fninvalid))
+ output = ubman.run_command('tftpboot %x %s' % (srcaddr, fninvalid))
assert expected_tftp in output
expected_op = 'zynq rsa <baseaddr>'
- output = u_boot_console.run_command('zynq rsa %x ' % (srcaddr))
+ output = ubman.run_command('zynq rsa %x ' % (srcaddr))
assert expected_op in output
- output = u_boot_console.run_command('echo $?')
+ output = ubman.run_command('echo $?')
assert not output.endswith('0')