test/py: Shorten u_boot_console
This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.
But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.
It would be too confusing to use con as it would be confused with
config and it is probably too short.
So shorten it to 'ubman'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/
diff --git a/test/py/tests/test_mdio.py b/test/py/tests/test_mdio.py
index 89711e7..5345f1f 100644
--- a/test/py/tests/test_mdio.py
+++ b/test/py/tests/test_mdio.py
@@ -22,8 +22,8 @@
}
"""
-def get_mdio_test_env(u_boot_console):
- f = u_boot_console.config.env.get("env__mdio_util_test", None)
+def get_mdio_test_env(ubman):
+ f = ubman.config.env.get("env__mdio_util_test", None)
if not f or len(f) == 0:
pytest.skip("No PHY device to test!")
else:
@@ -31,9 +31,9 @@
@pytest.mark.buildconfigspec("cmd_mii")
@pytest.mark.buildconfigspec("phylib")
-def test_mdio_list(u_boot_console):
- f = get_mdio_test_env(u_boot_console)
- output = u_boot_console.run_command("mdio list")
+def test_mdio_list(ubman):
+ f = get_mdio_test_env(ubman)
+ output = ubman.run_command("mdio list")
for dev, val in f.items():
phy_addr = val.get("phy_addr")
dev_name = val.get("device_name")
@@ -43,24 +43,24 @@
@pytest.mark.buildconfigspec("cmd_mii")
@pytest.mark.buildconfigspec("phylib")
-def test_mdio_read(u_boot_console):
- f = get_mdio_test_env(u_boot_console)
- output = u_boot_console.run_command("mdio list")
+def test_mdio_read(ubman):
+ f = get_mdio_test_env(ubman)
+ output = ubman.run_command("mdio list")
for dev, val in f.items():
phy_addr = hex(val.get("phy_addr"))
dev_name = val.get("device_name")
reg = hex(val.get("reg"))
reg_val = hex(val.get("reg_val"))
- output = u_boot_console.run_command(f"mdio read {phy_addr} {reg}")
+ output = ubman.run_command(f"mdio read {phy_addr} {reg}")
assert f"PHY at address {int(phy_addr, 16):x}:" in output
assert f"{int(reg, 16):x} - {reg_val}" in output
@pytest.mark.buildconfigspec("cmd_mii")
@pytest.mark.buildconfigspec("phylib")
-def test_mdio_write(u_boot_console):
- f = get_mdio_test_env(u_boot_console)
- output = u_boot_console.run_command("mdio list")
+def test_mdio_write(ubman):
+ f = get_mdio_test_env(ubman)
+ output = ubman.run_command("mdio list")
for dev, val in f.items():
phy_addr = hex(val.get("phy_addr"))
dev_name = val.get("device_name")
@@ -68,12 +68,12 @@
reg_val = hex(val.get("reg_val"))
wr_val = hex(val.get("write_val"))
- u_boot_console.run_command(f"mdio write {phy_addr} {reg} {wr_val}")
- output = u_boot_console.run_command(f"mdio read {phy_addr} {reg}")
+ ubman.run_command(f"mdio write {phy_addr} {reg} {wr_val}")
+ output = ubman.run_command(f"mdio read {phy_addr} {reg}")
assert f"PHY at address {int(phy_addr, 16):x}:" in output
assert f"{int(reg, 16):x} - {wr_val}" in output
- u_boot_console.run_command(f"mdio write {phy_addr} {reg} {reg_val}")
- output = u_boot_console.run_command(f"mdio read {phy_addr} {reg}")
+ ubman.run_command(f"mdio write {phy_addr} {reg} {reg_val}")
+ output = ubman.run_command(f"mdio read {phy_addr} {reg}")
assert f"PHY at address {int(phy_addr, 16):x}:" in output
assert f"{int(reg, 16):x} - {reg_val}" in output