mtd: nand: raw: atmel_nand: Use ATMEL_BASE_ECC directly
This is the only driver, and only one platform makes use of, setting
CONFIG_SYS_NAND_ECC_BASE. Reference ATMEL_BASE_ECC directly in this
case.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c
index 61bfd17..a541af6 100644
--- a/drivers/mtd/nand/raw/atmel_nand.c
+++ b/drivers/mtd/nand/raw/atmel_nand.c
@@ -1012,13 +1012,13 @@
unsigned int ecc_value;
/* get the first 2 ECC bytes */
- ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR);
+ ecc_value = ecc_readl(ATMEL_BASE_ECC, PR);
ecc_code[0] = ecc_value & 0xFF;
ecc_code[1] = (ecc_value >> 8) & 0xFF;
/* get the last 2 ECC bytes */
- ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY;
+ ecc_value = ecc_readl(ATMEL_BASE_ECC, NPR) & ATMEL_ECC_NPARITY;
ecc_code[2] = ecc_value & 0xFF;
ecc_code[3] = (ecc_value >> 8) & 0xFF;
@@ -1101,16 +1101,16 @@
unsigned int ecc_word, ecc_bit;
/* get the status from the Status Register */
- ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR);
+ ecc_status = ecc_readl(ATMEL_BASE_ECC, SR);
/* if there's no error */
if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
return 0;
/* get error bit offset (4 bits) */
- ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR;
+ ecc_bit = ecc_readl(ATMEL_BASE_ECC, PR) & ATMEL_ECC_BITADDR;
/* get word address (12 bits) */
- ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR;
+ ecc_word = ecc_readl(ATMEL_BASE_ECC, PR) & ATMEL_ECC_WORDADDR;
ecc_word >>= 4;
/* if there are multiple errors */
@@ -1180,22 +1180,22 @@
switch (mtd->writesize) {
case 512:
nand->ecc.layout = &atmel_oobinfo_small;
- ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
+ ecc_writel(ATMEL_BASE_ECC, MR,
ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
nand->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
+ ecc_writel(ATMEL_BASE_ECC, MR,
ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
nand->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
+ ecc_writel(ATMEL_BASE_ECC, MR,
ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
nand->ecc.layout = &atmel_oobinfo_large;
- ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
+ ecc_writel(ATMEL_BASE_ECC, MR,
ATMEL_ECC_PAGESIZE_4224);
break;
default: