mpc85xx L2 cache reporting and SRAM relocation option.
Allow debugger to override flash cs0/cs1 settings to enable alternate
boot regions
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 9517146..888417f 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -1,4 +1,6 @@
/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
* (C) Copyright 2003 Motorola Inc.
* Modified by Xianghua Xiao, X.Xiao@motorola.com
*
@@ -133,15 +135,18 @@
#endif
/* now restrict to preliminary range */
+ /* if cs1 is already set via debugger, leave cs0/cs1 alone */
+ if (! memctl->br1 & 1) {
#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
- memctl->br0 = CFG_BR0_PRELIM;
- memctl->or0 = CFG_OR0_PRELIM;
+ memctl->br0 = CFG_BR0_PRELIM;
+ memctl->or0 = CFG_OR0_PRELIM;
#endif
#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
- memctl->or1 = CFG_OR1_PRELIM;
- memctl->br1 = CFG_BR1_PRELIM;
+ memctl->or1 = CFG_OR1_PRELIM;
+ memctl->br1 = CFG_BR1_PRELIM;
#endif
+ }
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
memctl->or2 = CFG_OR2_PRELIM;
@@ -185,16 +190,23 @@
* The newer 8548, etc, parts have twice as much cache, but
* use the same bit-encoding as the older 8555, etc, parts.
*
- * FIXME: Use PVR_VER(pvr) == 1 test here instead of SVR_VER()?
*/
int cpu_init_r(void)
{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+
+#ifdef CONFIG_CLEAR_LAW0
+ /* clear alternate boot location LAW (used for sdram, or ddr bank) */
+ ecm->lawar0 = 0;
+#endif
+
#if defined(CONFIG_L2_CACHE)
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_l2cache_t *l2cache = &immap->im_l2cache;
volatile uint cache_ctl;
uint svr, ver;
+ uint l2srbar;
svr = get_svr();
ver = SVR_VER(svr);
@@ -204,30 +216,47 @@
switch (cache_ctl & 0x30000000) {
case 0x20000000:
- if (ver == SVR_8548 || ver == SVR_8548_E) {
+ if (ver == SVR_8548 || ver == SVR_8548_E ||
+ ver == SVR_8544) {
printf ("L2 cache 512KB:");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
} else {
printf ("L2 cache 256KB:");
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ cache_ctl = 0xc8000000;
}
break;
- case 0x00000000:
case 0x10000000:
+ printf ("L2 cache 256KB:");
+ if (ver == SVR_8544 || ver == SVR_8544_E) {
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
case 0x30000000:
+ case 0x00000000:
default:
printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
return -1;
}
- asm("msync;isync");
- l2cache->l2ctl = 0x68000000; /* invalidate */
- cache_ctl = l2cache->l2ctl;
- asm("msync;isync");
-
- l2cache->l2ctl = 0xa8000000; /* enable 256KB L2 cache */
- cache_ctl = l2cache->l2ctl;
- asm("msync;isync");
-
- printf(" enabled\n");
+ if (l2cache->l2ctl & 0x80000000) {
+ printf(" already enabled.");
+ l2srbar = l2cache->l2srbar0;
+#ifdef CFG_INIT_L2_ADDR
+ if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
+ l2srbar = CFG_INIT_L2_ADDR;
+ l2cache->l2srbar0 = l2srbar;
+ printf(" Moving to 0x%08x", CFG_INIT_L2_ADDR);
+ }
+#endif /* CFG_INIT_L2_ADDR */
+ puts("\n");
+ } else {
+ asm("msync;isync");
+ l2cache->l2ctl = cache_ctl; /* invalidate & enable */
+ asm("msync;isync");
+ printf(" enabled\n");
+ }
#else
printf("L2 cache: disabled\n");
#endif