Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx
Porting to DM and i.MX8
------------------------
- warp7 to DM
- kp_imx53 to DM
- Warnings in DT
- MX8QM support
- colibri-imx6ull to DM
- imx7d-pico to DM
- ocotp for MX8
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0a76138..e84f3d7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1639,6 +1639,7 @@
source "board/ucRobotics/bubblegum_96/Kconfig"
source "board/birdland/bav335x/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
+source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/xilinx/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b4dc57e..dfa5b02 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -558,6 +558,7 @@
dtb-$(CONFIG_MX6ULL) += \
imx6ull-14x14-evk.dtb \
imx6ull-colibri.dtb \
+ imx6ull-dart-6ul.dtb
dtb-$(CONFIG_ARCH_MX6) += \
imx6-colibri.dtb
@@ -566,11 +567,16 @@
imx7d-sdb-qspi.dtb \
imx7-colibri-emmc.dtb \
imx7-colibri-rawnand.dtb \
- imx7s-warp.dtb
+ imx7s-warp.dtb \
+ imx7d-pico-pi.dtb \
+ imx7d-pico-hobbit.dtb
+
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
-dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_IMX8) += \
+ fsl-imx8qxp-mek.dtb \
+ fsl-imx8qm-mek.dtb \
dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb
diff --git a/arch/arm/dts/fsl-imx8dx.dtsi b/arch/arm/dts/fsl-imx8dx.dtsi
index 3b1a2a2..715abb4 100644
--- a/arch/arm/dts/fsl-imx8dx.dtsi
+++ b/arch/arm/dts/fsl-imx8dx.dtsi
@@ -236,6 +236,21 @@
power-domains = <&pd_dma>;
wakeup-irq = <225>;
};
+ pd_dma_lpuart1: PD_DMA_UART1 {
+ reg = <SC_R_UART_1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpuart2: PD_DMA_UART2 {
+ reg = <SC_R_UART_2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpuart3: PD_DMA_UART3 {
+ reg = <SC_R_UART_3>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
};
};
@@ -402,6 +417,45 @@
status = "disabled";
};
+ lpuart1: serial@5a070000 {
+ compatible = "fsl,imx8qm-lpuart";
+ reg = <0x0 0x5a070000 0x0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QXP_UART1_CLK>,
+ <&clk IMX8QXP_UART1_IPG_CLK>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX8QXP_UART1_CLK>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&pd_dma_lpuart1>;
+ status = "disabled";
+ };
+
+ lpuart2: serial@5a080000 {
+ compatible = "fsl,imx8qm-lpuart";
+ reg = <0x0 0x5a080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QXP_UART2_CLK>,
+ <&clk IMX8QXP_UART2_IPG_CLK>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX8QXP_UART2_CLK>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&pd_dma_lpuart2>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@5a090000 {
+ compatible = "fsl,imx8qm-lpuart";
+ reg = <0x0 0x5a090000 0x0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QXP_UART3_CLK>,
+ <&clk IMX8QXP_UART3_IPG_CLK>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX8QXP_UART3_CLK>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&pd_dma_lpuart3>;
+ status = "disabled";
+ };
+
usdhc1: usdhc@5b010000 {
compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
interrupt-parent = <&gic>;
diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
new file mode 100644
index 0000000..5d50eb0
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&mu {
+ u-boot,dm-spl;
+};
+
+&clk {
+ u-boot,dm-spl;
+};
+
+&iomuxc {
+ u-boot,dm-spl;
+};
+
+&pd_lsio {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+ u-boot,dm-spl;
+};
+
+&pd_conn {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+ u-boot,dm-spl;
+};
+
+&gpio0 {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&gpio3 {
+ u-boot,dm-spl;
+};
+
+&gpio4 {
+ u-boot,dm-spl;
+};
+
+&gpio5 {
+ u-boot,dm-spl;
+};
+
+&gpio6 {
+ u-boot,dm-spl;
+};
+
+&gpio7 {
+ u-boot,dm-spl;
+};
+
+&lpuart0 {
+ u-boot,dm-spl;
+};
+
+&usdhc1 {
+ u-boot,dm-spl;
+};
+
+&usdhc2 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/fsl-imx8qm-mek.dts b/arch/arm/dts/fsl-imx8qm-mek.dts
new file mode 100644
index 0000000..63908ba
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8qm-mek.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qm.dtsi"
+#include "fsl-imx8qm-mek-u-boot.dtsi"
+
+/ {
+ model = "Freescale i.MX8QM MEK";
+ compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+ chosen {
+ bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+ stdout-path = &lpuart0;
+ };
+
+ reg_usdhc2_vmmc: usdhc2_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "sw-3p3-sd1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ off-on-delay = <4800>;
+ enable-active-high;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx8qm-mek {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0x0600004c
+ SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x0600004c
+ SC_P_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0
+ SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
+ SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
+ SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000061
+ SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000061
+ SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000061
+ SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000061
+ SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000061
+ SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000061
+ SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000061
+ SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000061
+ SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000061
+ SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000061
+ SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000061
+ SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000061
+ >;
+ };
+
+ pinctrl_fec2: fec2grp {
+ fsl,pins = <
+ SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
+ SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
+ SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
+ SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
+ SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
+ SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
+ SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
+ SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
+ SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
+ SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
+ SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
+ SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
+ SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ SC_P_UART0_RX_DMA_UART0_RX 0x06000020
+ SC_P_UART0_TX_DMA_UART0_TX 0x06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021
+ SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021
+ SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
+ SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
+ SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
+ SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
+ SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
+ SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
+ SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-txid";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ fsl,rgmii_rxc_dly;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ at803x,eee-disabled;
+ at803x,vddio-1p8v;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ at803x,eee-disabled;
+ at803x,vddio-1p8v;
+ status = "disabled";
+ };
+ };
+};
+
+&lpuart0 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-imx8qm.dtsi b/arch/arm/dts/fsl-imx8qm.dtsi
new file mode 100644
index 0000000..b39c40b
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8qm.dtsi
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "fsl-imx8-ca53.dtsi"
+#include <dt-bindings/clock/imx8qm-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <dt-bindings/soc/imx8_pd.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "fsl,imx8qm";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ serial0 = &lpuart0;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ /* DRAM space - 1, size : 1 GB DRAM */
+ };
+
+ gic: interrupt-controller@51a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+ <0x0 0x51b00000 0 0xC0000>, /* GICR */
+ <0x0 0x52000000 0 0x2000>, /* GICC */
+ <0x0 0x52010000 0 0x1000>, /* GICH */
+ <0x0 0x52020000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ mu: mu@5d1c0000 {
+ compatible = "fsl,imx8-mu";
+ reg = <0x0 0x5d1c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ fsl,scu_ap_mu_id = <0>;
+ status = "okay";
+
+ clk: clk {
+ compatible = "fsl,imx8qm-clk";
+ #clock-cells = <1>;
+ };
+
+ iomuxc: iomuxc {
+ compatible = "fsl,imx8qm-iomuxc";
+ };
+ };
+
+ imx8qm-pm {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_lsio: PD_LSIO {
+ compatible = "nxp,imx8-pd";
+ reg = <SC_R_LAST>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_lsio_gpio0: PD_LSIO_GPIO_0 {
+ reg = <SC_R_GPIO_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio1: PD_LSIO_GPIO_1 {
+ reg = <SC_R_GPIO_1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio2: PD_LSIO_GPIO_2 {
+ reg = <SC_R_GPIO_2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio3: PD_LSIO_GPIO_3 {
+ reg = <SC_R_GPIO_3>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio4: PD_LSIO_GPIO_4 {
+ reg = <SC_R_GPIO_4>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio5: PD_LSIO_GPIO_5{
+ reg = <SC_R_GPIO_5>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio6:PD_LSIO_GPIO_6 {
+ reg = <SC_R_GPIO_6>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ pd_lsio_gpio7: PD_LSIO_GPIO_7 {
+ reg = <SC_R_GPIO_7>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_lsio>;
+ };
+ };
+
+ pd_conn: PD_CONN {
+ compatible = "nxp,imx8-pd";
+ reg = <SC_R_LAST>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_conn_sdch0: PD_CONN_SDHC_0 {
+ reg = <SC_R_SDHC_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_conn>;
+ };
+ pd_conn_sdch1: PD_CONN_SDHC_1 {
+ reg = <SC_R_SDHC_1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_conn>;
+ };
+ pd_conn_sdch2: PD_CONN_SDHC_2 {
+ reg = <SC_R_SDHC_2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_conn>;
+ };
+ pd_conn_enet0: PD_CONN_ENET_0 {
+ reg = <SC_R_ENET_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_conn>;
+ wakeup-irq = <258>;
+ };
+ pd_conn_enet1: PD_CONN_ENET_1 {
+ reg = <SC_R_ENET_1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_conn>;
+ fsl,wakeup_irq = <262>;
+ };
+ };
+
+ pd_dma: PD_DMA {
+ compatible = "nxp,imx8-pd";
+ reg = <SC_R_LAST>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_dma_lpi2c0: PD_DMA_I2C_0 {
+ reg = <SC_R_I2C_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpi2c1: PD_DMA_I2C_1 {
+ reg = <SC_R_I2C_1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpi2c2:PD_DMA_I2C_2 {
+ reg = <SC_R_I2C_2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpi2c3: PD_DMA_I2C_3 {
+ reg = <SC_R_I2C_3>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpi2c4: PD_DMA_I2C_4 {
+ reg = <SC_R_I2C_4>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ pd_dma_lpuart0: PD_DMA_UART0 {
+ reg = <SC_R_UART_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ wakeup-irq = <345>;
+ };
+ };
+ };
+
+ gpio0: gpio@5d080000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d080000 0x0 0x10000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@5d090000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d090000 0x0 0x10000>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@5d0a0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@5d0b0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@5d0c0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@5d0d0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0d0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio5>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@5d0e0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@5d0f0000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x0 0x5d0f0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ power-domains = <&pd_lsio_gpio7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ lpuart0: serial@5a060000 {
+ compatible = "fsl,imx8qm-lpuart";
+ reg = <0x0 0x5a060000 0x0 0x1000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QM_UART0_CLK>,
+ <&clk IMX8QM_UART0_IPG_CLK>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX8QM_UART0_CLK>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&pd_dma_lpuart0>;
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@5b010000 {
+ compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x5b010000 0x0 0x10000>;
+ clocks = <&clk IMX8QM_SDHC0_IPG_CLK>,
+ <&clk IMX8QM_SDHC0_CLK>,
+ <&clk IMX8QM_CLK_DUMMY>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QM_SDHC0_DIV>;
+ assigned-clock-rates = <400000000>;
+ power-domains = <&pd_conn_sdch0>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@5b020000 {
+ compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x5b020000 0x0 0x10000>;
+ clocks = <&clk IMX8QM_SDHC1_IPG_CLK>,
+ <&clk IMX8QM_SDHC1_CLK>,
+ <&clk IMX8QM_CLK_DUMMY>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QM_SDHC1_DIV>;
+ assigned-clock-rates = <200000000>;
+ power-domains = <&pd_conn_sdch1>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@5b030000 {
+ compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x5b030000 0x0 0x10000>;
+ clocks = <&clk IMX8QM_SDHC2_IPG_CLK>,
+ <&clk IMX8QM_SDHC2_CLK>,
+ <&clk IMX8QM_CLK_DUMMY>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QM_SDHC2_DIV>;
+ assigned-clock-rates = <200000000>;
+ power-domains = <&pd_conn_sdch2>;
+ status = "disabled";
+ };
+
+ fec1: ethernet@5b040000 {
+ compatible = "fsl,imx8qm-fec", "fsl,imx7d-fec";
+ reg = <0x0 0x5b040000 0x0 0x10000>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QM_ENET0_IPG_CLK>,
+ <&clk IMX8QM_ENET0_AHB_CLK>,
+ <&clk IMX8QM_ENET0_RGMII_TX_CLK>,
+ <&clk IMX8QM_ENET0_PTP_CLK>,
+ <&clk IMX8QM_ENET0_TX_CLK>;
+ clock-names = "ipg", "ahb", "enet_clk_ref", "ptp",
+ "enet_2x_txclk";
+ assigned-clocks = <&clk IMX8QM_ENET0_ROOT_DIV>,
+ <&clk IMX8QM_ENET0_REF_DIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ fsl,wakeup_irq = <0>;
+ power-domains = <&pd_conn_enet0>;
+ status = "disabled";
+ };
+
+ fec2: ethernet@5b050000 {
+ compatible = "fsl,imx8qm-fec", "fsl,imx7d-fec";
+ reg = <0x0 0x5b050000 0x0 0x10000>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8QM_ENET1_IPG_CLK>,
+ <&clk IMX8QM_ENET1_AHB_CLK>,
+ <&clk IMX8QM_ENET1_RGMII_TX_CLK>,
+ <&clk IMX8QM_ENET1_PTP_CLK>,
+ <&clk IMX8QM_ENET1_TX_CLK>;
+ clock-names = "ipg", "ahb", "enet_clk_ref", "ptp",
+ "enet_2x_txclk";
+ assigned-clocks = <&clk IMX8QM_ENET1_ROOT_DIV>,
+ <&clk IMX8QM_ENET1_REF_DIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ fsl,wakeup_irq = <0>;
+ power-domains = <&pd_conn_enet1>;
+ status = "disabled";
+ };
+};
+
+&A53_0 {
+ clocks = <&clk IMX8QM_A53_DIV>;
+};
diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
index 5d50eb0..2015590 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -3,6 +3,11 @@
* Copyright 2018 NXP
*/
+&{/imx8qx-pm} {
+
+ u-boot,dm-spl;
+};
+
&mu {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx53-kp.dts b/arch/arm/dts/imx53-kp.dts
index 4e1d8af..5f9e4fa 100644
--- a/arch/arm/dts/imx53-kp.dts
+++ b/arch/arm/dts/imx53-kp.dts
@@ -17,8 +17,36 @@
chosen {
stdout-path = &uart2;
};
+
+ aliases {
+ mmc0 = &esdhc3;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usbh1_vbus: regulator-usbh1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
};
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eth>;
@@ -61,6 +89,21 @@
pinctrl-0 = <&pinctrl_hog>;
imx53-kp {
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d4
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d4
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d4
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d4
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d4
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d4
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d4
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d4
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1e4
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d4
+ >;
+ };
+
pinctrl_eth: ethgrp {
fsl,pins = <
MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
@@ -82,8 +125,6 @@
fsl,pins = <
/* PHY RESET */
MX53_PAD_PATA_DA_0__GPIO7_6 0x182
- /* VBUS_PWR_EN */
- MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4
/* BOOSTER_OFF */
MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
/* LCD BACKLIGHT */
@@ -129,6 +170,13 @@
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
>;
};
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ /* VBUS_PWR_EN */
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4
+ >;
+ };
};
};
@@ -137,3 +185,10 @@
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <®_usbh1_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 0fd4acc..5ba6174 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -35,6 +35,7 @@
mmc1 = &esdhc2;
mmc2 = &esdhc3;
mmc3 = &esdhc4;
+ usb1 = &usbh1;
};
tzic: tz-interrupt-controller@fffc000 {
@@ -136,6 +137,15 @@
status = "disabled";
};
+ usbh1: usb@53f80200 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index ab1716b..d038f41 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -202,6 +202,7 @@
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&pd_pu>;
+ #cooling-cells = <2>;
};
ipu2: ipu@2800000 {
@@ -234,6 +235,8 @@
};
ipu2_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <2>;
ipu2_di0_disp0: endpoint@0 {
@@ -262,6 +265,8 @@
};
ipu2_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <3>;
ipu2_di1_hdmi: endpoint@1 {
diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 95c67be..4196cbd 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2019 Toradex AG
*/
/dts-v1/;
@@ -9,7 +9,12 @@
/ {
model = "Toradex Colibri iMX6ULL";
- compatible = "toradex,imx6ull-colibri", "fsl,imx6ull";
+ compatible = "toradex,colibri-imx6ull", "fsl,imx6ull";
+
+ aliases {
+ mmc0 = &usdhc1;
+ usb0 = &usbotg1; /* required for ums */
+ };
chosen {
stdout-path = &uart1;
@@ -31,6 +36,13 @@
regulator-max-microvolt = <3300000>;
};
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -43,6 +55,17 @@
states = <1800000 0x1 3300000 0x0>;
vin-supply = <®_module_3v3>;
};
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+ vin-supply = <®_5v0>;
+ };
};
&adc1 {
@@ -57,6 +80,7 @@
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
};
+/* Ethernet */
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
@@ -76,6 +100,7 @@
};
};
+/* NAND */
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -86,21 +111,28 @@
status = "okay";
};
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
- sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+ sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
ad7879@2c {
@@ -126,24 +158,28 @@
&pinctrl_lcdif_ctrl>;
};
+/* PWM <A> */
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
#pwm-cells = <3>;
};
+/* PWM <B> */
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
#pwm-cells = <3>;
};
+/* PWM <C> */
&pwm6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
#pwm-cells = <3>;
};
+/* PWM <D> */
&pwm7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
@@ -158,45 +194,110 @@
status = "disabled";
};
+/* Colibri UART_A */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
fsl,dte-mode;
status = "okay";
};
+/* Colibri UART_B */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
fsl,dte-mode;
};
+/* Colibri UART_C */
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,dte-mode;
};
+/* Colibri USBC */
&usbotg1 {
dr_mode = "otg";
srp-disable;
hnp-disable;
adp-disable;
+ status = "okay";
};
+/* Colibri USBH */
&usbotg2 {
dr_mode = "host";
+ vbus-supply = <®_usbh_vbus>;
+ status = "okay";
};
+/* Colibri MMC */
&usdhc1 {
assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_sd1_vmmc>;
+ status = "okay";
};
&iomuxc {
+ pinctrl_can_int: canint-grp {
+ fsl,pins = <
+ /* SODIMM 73 */
+ MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14
+ >;
+ };
+
+ pinctrl_enet2: enet2-grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1_cs: ecspi1-cs-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2-grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_gpio_bl_on: gpio-bl-on-grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0
+ >;
+ };
+
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */
@@ -253,54 +354,6 @@
>;
};
- pinctrl_can_int: canint-grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14 /* SODIMM 73 */
- >;
- };
-
- pinctrl_enet2: enet2-grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- >;
- };
-
- pinctrl_ecspi1_cs: ecspi1-cs-grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0
- >;
- };
-
- pinctrl_ecspi1: ecspi1-grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0
- MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0
- MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0
- >;
- };
-
- pinctrl_flexcan2: flexcan2-grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
- MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
- >;
- };
-
- pinctrl_gpio_bl_on: gpio-bl-on-grp {
- fsl,pins = <
- MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0
- >;
- };
-
pinctrl_gpmi_nand: gpmi-nand-grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
@@ -484,6 +537,8 @@
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059
+
+ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14
>;
};
};
@@ -511,7 +566,7 @@
>;
};
- pinctrl_snvs_ad7879_int: snvs-ad7879-int { /* TOUCH Interrupt */
+ pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
>;
@@ -547,4 +602,3 @@
>;
};
};
-
diff --git a/arch/arm/dts/imx6ull-dart-6ul.dts b/arch/arm/dts/imx6ull-dart-6ul.dts
new file mode 100644
index 0000000..4cab1a0
--- /dev/null
+++ b/arch/arm/dts/imx6ull-dart-6ul.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ull-dart-6ul.dtsi"
+
+/ {
+ model = "Variscite DART-6UL Evaluation Kit";
+ compatible = "variscite,imx6ull-dart-6ul", "fsl,imx6ull";
+};
+
+&usdhc2 {
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ dr_mode = "otg";
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+};
diff --git a/arch/arm/dts/imx6ull-dart-6ul.dtsi b/arch/arm/dts/imx6ull-dart-6ul.dtsi
new file mode 100644
index 0000000..e96669f
--- /dev/null
+++ b/arch/arm/dts/imx6ull-dart-6ul.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+
+/ {
+ model = "Variscite DART-6UL i.MX6 Ultra Low Lite SOM";
+ compatible = "variscite,imx6ull-dart-6ul", "fsl,imx6ull";
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio1: mdio1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio2: mdio2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ fsl,no-blockmark-swap;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "uboot-env";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "root";
+ reg = <0x500000 0x0>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "cat,24c32";
+ reg = <0x50>;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ #pwm-cells = <3>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ bus-width = <0x4>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0X1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0X1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x0b0b1
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
+ MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0b0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2cgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1grp_gpio {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2cgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2grp_gpio {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
+ MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
+
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6ull-pinfunc.h b/arch/arm/dts/imx6ull-pinfunc.h
index fca0036..7770ed3 100644
--- a/arch/arm/dts/imx6ull-pinfunc.h
+++ b/arch/arm/dts/imx6ull-pinfunc.h
@@ -14,6 +14,8 @@
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068 0x02f4 0x0000 0x3 0x0
+
#define MX6UL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6UL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6UL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
@@ -41,17 +43,17 @@
#define MX6UL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
#define MX6UL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi
index 97236d8..4598f2f 100644
--- a/arch/arm/dts/imx6ull.dtsi
+++ b/arch/arm/dts/imx6ull.dtsi
@@ -46,6 +46,8 @@
spi4 = &ecspi4;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
};
cpus {
diff --git a/arch/arm/dts/imx7d-pico-hobbit.dts b/arch/arm/dts/imx7d-pico-hobbit.dts
new file mode 100644
index 0000000..98604f0
--- /dev/null
+++ b/arch/arm/dts/imx7d-pico-hobbit.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+ model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
+ compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx7-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ };
+ };
+};
+
+&i2c1 {
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_vref_1v8>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ adc081c: adc@50 {
+ compatible = "ti,adc081c";
+ reg = <0x50>;
+ vref-supply = <®_3p3v>;
+ };
+};
+
+&ecspi3 {
+ ads7846@0 {
+ reg = <0>;
+ compatible = "ti,ads7846";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 0>;
+ spi-max-frequency = <1000000>;
+ pendown-gpio = <&gpio2 7 0>;
+ vcc-supply = <®_3p3v>;
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <4095>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4095>;
+ ti,pressure-max = /bits/ 16 <1024>;
+ ti,x-plate-ohms = /bits/ 16 <90>;
+ ti,y-plate-ohms = /bits/ 16 <90>;
+ ti,debounce-max = /bits/ 16 <70>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <2>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ wakeup-source;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
+ >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/dts/imx7d-pico-pi.dts b/arch/arm/dts/imx7d-pico-pi.dts
new file mode 100644
index 0000000..66ca590
--- /dev/null
+++ b/arch/arm/dts/imx7d-pico-pi.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+ model = "TechNexion PICO-IMX7D Board and PI baseboard";
+ compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led {
+ label = "gpio-led";
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx7-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ };
+ };
+};
+
+&i2c1 {
+ sgtl5000: codec@a {
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ compatible = "fsl,sgtl5000";
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_vref_1v8>;
+ };
+};
+
+&i2c4 {
+ polytouch: touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
+ >;
+ };
+
+};
\ No newline at end of file
diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi
new file mode 100644
index 0000000..9f1fe68
--- /dev/null
+++ b/arch/arm/dts/imx7d-pico.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+
+/ {
+ aliases {
+ mmc0 = &usdhc3;
+ };
+
+ /* Will be filled by the bootloader */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
+ reg_wlreg_on: regulator-wlreg_on {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlreg_on>;
+ regulator-name = "wlreg_on";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_pwr>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "ext_clock";
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ status = "okay";
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pmic: pfuze3000@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 { /* Backlight */
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart7 { /* Bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ tuning-step = <2>;
+ vmmc-supply = <®_3p3v>;
+ wakeup-source;
+ no-1-8-v;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
+ no-1-8-v;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_wlreg_on>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ no-1-8-v;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
+ MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x4000007f
+ MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
+ >;
+ };
+
+ pinctrl_can1: can1frp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59
+ MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59
+ >;
+ };
+
+ pinctrl_can2: can2frp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59
+ MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_pwm1: pwm1 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
+ >;
+ };
+
+ pinctrl_pwm2: pwm2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
+ >;
+ };
+
+ pinctrl_pwm3: pwm3 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ >;
+ };
+
+ pinctrl_reg_wlreg_on: regregongrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
+ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79
+ MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x79
+ MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x79
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79
+ MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79
+ MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79
+ MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg1_pwr: usbotg_pwr {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_wifi_clk: wificlkgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+ >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/dts/imx7s-warp.dts b/arch/arm/dts/imx7s-warp.dts
index d28b7ec..db5ef67 100644
--- a/arch/arm/dts/imx7s-warp.dts
+++ b/arch/arm/dts/imx7s-warp.dts
@@ -19,6 +19,11 @@
aliases {
mmc0 = &usdhc3;
+ usb0 = &usbotg1;
+ };
+
+ chosen {
+ stdout-path = &uart1;
};
gpio-keys {
diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
index 5ce1707..91ca4e4 100644
--- a/arch/arm/dts/vf-colibri.dtsi
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -60,11 +60,24 @@
status = "okay";
};
+/* Ethernet */
&fec1 {
phy-mode = "rmii";
+ phy-handle = <ðphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ max-speed = <100>;
+ reg = <1>;
+ };
+ };
};
&i2c0 {
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index 667badb..d4a83ee 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -26,6 +26,7 @@
#define MXC_CPU_MX7D 0x72
#define MXC_CPU_IMX8MQ 0x82
#define MXC_CPU_IMX8QXP_A0 0x90 /* dummy ID */
+#define MXC_CPU_IMX8QM 0x91 /* dummy ID */
#define MXC_CPU_IMX8QXP 0x92 /* dummy ID */
#define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */
#define MXC_CPU_VF610 0xF6 /* dummy ID */
diff --git a/arch/arm/include/asm/arch-imx8/imx8-pins.h b/arch/arm/include/asm/arch-imx8/imx8-pins.h
index dcced10..2130298 100644
--- a/arch/arm/include/asm/arch-imx8/imx8-pins.h
+++ b/arch/arm/include/asm/arch-imx8/imx8-pins.h
@@ -8,6 +8,8 @@
#if defined(CONFIG_IMX8QXP)
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#elif defined(CONFIG_IMX8QM)
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
#else
#error "No pin header"
#endif
diff --git a/arch/arm/include/asm/arch-imx8/sci/sci.h b/arch/arm/include/asm/arch-imx8/sci/sci.h
index d162166..9737769 100644
--- a/arch/arm/include/asm/arch-imx8/sci/sci.h
+++ b/arch/arm/include/asm/arch-imx8/sci/sci.h
@@ -62,10 +62,6 @@
sc_pm_clock_rate_t *rate);
int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_pm_clock_rate_t *rate);
-int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
- sc_pm_clock_rate_t *rate);
-int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
- sc_pm_clock_rate_t *rate);
int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_bool_t enable, sc_bool_t autog);
diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index d0f866b..4925dd7 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -134,4 +134,7 @@
unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
unsigned long reg1, unsigned long reg2);
+unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0,
+ unsigned long *reg1, unsigned long reg2,
+ unsigned long reg3);
#endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index c3ed62a..37675d0 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -204,7 +204,7 @@
targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
-obj-$(CONFIG_ARM64) += sip.o
+obj-$(CONFIG_ARM64) += lowlevel.o sip.o
obj-$(CONFIG_MX5) += mx5/
obj-$(CONFIG_MX6) += mx6/
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index f76a139..c32f7db 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -10,6 +10,11 @@
SPL runs in EL3 mode, it use MU0_A to communicate with SCU.
So we could not reuse the one in dts which is for normal U-Boot.
+config IMX8QM
+ select IMX8
+ select SUPPORT_SPL
+ bool
+
config IMX8QXP
select IMX8
select SUPPORT_SPL
@@ -27,8 +32,14 @@
select BOARD_LATE_INIT
select IMX8QXP
+config TARGET_IMX8QM_MEK
+ bool "Support i.MX8QM MEK board"
+ select BOARD_LATE_INIT
+ select IMX8QM
+
endchoice
source "board/freescale/imx8qxp_mek/Kconfig"
+source "board/freescale/imx8qm_mek/Kconfig"
endif
diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c
index 4bbc956..2c42535 100644
--- a/arch/arm/mach-imx/imx8/cpu.c
+++ b/arch/arm/mach-imx/imx8/cpu.c
@@ -542,6 +542,8 @@
case MXC_CPU_IMX8QXP:
case MXC_CPU_IMX8QXP_A0:
return "QXP";
+ case MXC_CPU_IMX8QM:
+ return "QM";
default:
return "??";
}
@@ -613,6 +615,7 @@
static const struct udevice_id cpu_imx8_ids[] = {
{ .compatible = "arm,cortex-a35" },
+ { .compatible = "arm,cortex-a53" },
{ }
};
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 11251c5..7ec39b3 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -169,6 +169,7 @@
int arch_cpu_init(void)
{
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
/*
* Init timer at very early state, because sscg pll setting
* will use it
@@ -180,6 +181,12 @@
imx_set_wdog_powerdown(false);
}
+ if (is_imx8mq()) {
+ clock_enable(CCGR_OCOTP, 1);
+ if (readl(&ocotp->ctrl) & 0x200)
+ writel(0x200, &ocotp->ctrl_clr);
+ }
+
return 0;
}
diff --git a/arch/arm/mach-imx/lowlevel.S b/arch/arm/mach-imx/lowlevel.S
new file mode 100644
index 0000000..158fdb7
--- /dev/null
+++ b/arch/arm/mach-imx/lowlevel.S
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+ mrs x0, CurrentEL
+ cmp x0, #8
+ b.eq 1f
+ ret
+1:
+ msr daifclr, #4
+
+ /* set HCR_EL2.AMO to catch SERROR */
+ mrs x0, hcr_el2
+ orr x0, x0, #0x20
+ msr hcr_el2, x0
+ isb
+ ret
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/mach-imx/mx2/Kconfig b/arch/arm/mach-imx/mx2/Kconfig
index ea308fc..30a331a 100644
--- a/arch/arm/mach-imx/mx2/Kconfig
+++ b/arch/arm/mach-imx/mx2/Kconfig
@@ -17,7 +17,7 @@
config TARGET_ZMX25
bool "Support zmx25"
select BOARD_LATE_INIT
- select CPU_ARM926EJS1
+ select CPU_ARM926EJS
endchoice
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index 29051c4..bde37bb 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -27,6 +27,10 @@
select DM_I2C
select DM_PMIC
select DM_SERIAL
+ select DM_MMC
+ select BLK
+ select DM_USB
+ select DM_REGULATOR
select MX53
imply CMD_DM
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index e782859..f513c4c 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -161,6 +161,18 @@
select DM_THERMAL
select MX6ULL
+config TARGET_DART_6UL
+ bool "Variscite imx6ULL dart(DART-SOM-6ULL)"
+ select MX6ULL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_SERIAL
+ select DM_THERMAL
+ select SUPPORT_SPL
+
config TARGET_DHCOMIMX6
bool "dh_imx6"
select BOARD_EARLY_INIT_F
diff --git a/arch/arm/mach-imx/sip.c b/arch/arm/mach-imx/sip.c
index 813c2ae..968e7cf 100644
--- a/arch/arm/mach-imx/sip.c
+++ b/arch/arm/mach-imx/sip.c
@@ -20,3 +20,25 @@
return regs.regs[0];
}
+
+/*
+ * Do an SMC call to return 2 registers by having reg1 passed in by reference
+ */
+unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0,
+ unsigned long *reg1, unsigned long reg2,
+ unsigned long reg3)
+{
+ struct pt_regs regs;
+
+ regs.regs[0] = id;
+ regs.regs[1] = reg0;
+ regs.regs[2] = *reg1;
+ regs.regs[3] = reg2;
+ regs.regs[4] = reg3;
+
+ smc_call(®s);
+
+ *reg1 = regs.regs[1];
+
+ return regs.regs[0];
+}
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index 04e9eab..2939389 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -161,18 +161,18 @@
};
static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = {
- .p0_mpwldectrl0 = 0x0011000E,
- .p0_mpwldectrl1 = 0x000E001B,
- .p1_mpwldectrl0 = 0x00190015,
- .p1_mpwldectrl1 = 0x00070018,
- .p0_mpdgctrl0 = 0x42720306,
- .p0_mpdgctrl1 = 0x026F0266,
- .p1_mpdgctrl0 = 0x4273030A,
- .p1_mpdgctrl1 = 0x02740240,
- .p0_mprddlctl = 0x45393B3E,
- .p1_mprddlctl = 0x403A3747,
- .p0_mpwrdlctl = 0x40434541,
- .p1_mpwrdlctl = 0x473E4A3B,
+ .p0_mpwldectrl0 = 0x001a001a,
+ .p0_mpwldectrl1 = 0x00260015,
+ .p0_mpdgctrl0 = 0x030c0320,
+ .p0_mpdgctrl1 = 0x03100304,
+ .p0_mprddlctl = 0x432e3538,
+ .p0_mpwrdlctl = 0x363f423d,
+ .p1_mpwldectrl0 = 0x0006001e,
+ .p1_mpwldectrl1 = 0x00050015,
+ .p1_mpdgctrl0 = 0x031c0324,
+ .p1_mpdgctrl1 = 0x030c0258,
+ .p1_mprddlctl = 0x3834313f,
+ .p1_mpwrdlctl = 0x47374a42,
};
static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = {
@@ -482,6 +482,29 @@
SETUP_IOMUX_PADS(usb_pads);
}
+/* Perform DDR DRAM calibration */
+static int spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo)
+{
+ int ret = 0;
+
+#ifdef CONFIG_MX6_DDRCAL
+ udelay(100);
+ ret = mmdc_do_write_level_calibration(sysinfo);
+ if (ret) {
+ printf("DDR3: Write level calibration error [%d]\n", ret);
+ return ret;
+ }
+
+ ret = mmdc_do_dqs_calibration(sysinfo);
+ if (ret) {
+ printf("DDR3: DQS calibration error [%d]\n", ret);
+ return ret;
+ }
+#endif /* CONFIG_MX6_DDRCAL */
+
+ return ret;
+}
+
/* DRAM */
static void dhcom_spl_dram_init(void)
@@ -509,8 +532,7 @@
}
/* Perform DDR DRAM calibration */
- udelay(100);
- mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
+ spl_dram_perform_cal(&dhcom_ddr_64bit);
} else if (is_cpu_type(MXC_CPU_MX6DL)) {
mx6sdl_dram_iocfg(64, &dhcom6sdl_ddr_ioregs,
@@ -528,8 +550,7 @@
}
/* Perform DDR DRAM calibration */
- udelay(100);
- mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
+ spl_dram_perform_cal(&dhcom_ddr_64bit);
} else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
mx6sdl_dram_iocfg(32, &dhcom6sdl_ddr_ioregs,
@@ -552,8 +573,7 @@
}
/* Perform DDR DRAM calibration */
- udelay(100);
- mmdc_do_dqs_calibration(&dhcom_ddr_32bit);
+ spl_dram_perform_cal(&dhcom_ddr_32bit);
}
}
diff --git a/board/freescale/imx8qm_mek/Kconfig b/board/freescale/imx8qm_mek/Kconfig
new file mode 100644
index 0000000..93d7d5f
--- /dev/null
+++ b/board/freescale/imx8qm_mek/Kconfig
@@ -0,0 +1,14 @@
+if TARGET_IMX8QM_MEK
+
+config SYS_BOARD
+ default "imx8qm_mek"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "imx8qm_mek"
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/imx8qm_mek/MAINTAINERS b/board/freescale/imx8qm_mek/MAINTAINERS
new file mode 100644
index 0000000..115830d
--- /dev/null
+++ b/board/freescale/imx8qm_mek/MAINTAINERS
@@ -0,0 +1,6 @@
+i.MX8QM MEK BOARD
+M: Peng Fan <peng.fan@nxp.com>
+S: Maintained
+F: board/freescale/imx8qm_mek/
+F: include/configs/imx8qm_mek.h
+F: configs/imx8qm_mek_defconfig
diff --git a/board/freescale/imx8qm_mek/Makefile b/board/freescale/imx8qm_mek/Makefile
new file mode 100644
index 0000000..bc9a126
--- /dev/null
+++ b/board/freescale/imx8qm_mek/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2018 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += imx8qm_mek.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
new file mode 100644
index 0000000..c352380
--- /dev/null
+++ b/board/freescale/imx8qm_mek/README
@@ -0,0 +1,57 @@
+U-Boot for the NXP i.MX8QM EVK board
+
+Quick Start
+===========
+
+- Build the ARM Trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Flash the binary into the SD card
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+
+$ git clone https://source.codeaurora.org/external/imx/imx-atf
+$ cd imx-atf/
+$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
+$ make PLAT=imx8qm bl31
+
+Get scfw_tcm.bin and ahab-container.img
+==============================
+
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
+$ chmod +x imx-sc-firmware-1.1.bin
+$ ./imx-sc-firmware-1.1.bin
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+$ chmod +x firmware-imx-8.0.bin
+$ ./firmware-imx-8.0.bin
+
+Copy the following binaries to U-Boot folder:
+
+$ cp imx-atf/build/imx8qm/release/bl31.bin .
+$ cp u-boot/u-boot.bin .
+
+Copy the following firmwares U-Boot folder :
+
+$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
+$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin .
+
+Build U-Boot
+============
+$ export ATF_LOAD_ADDR=0x80000000
+$ export BL33_LOAD_ADDR=0x80020000
+$ make imx8qm_mek_defconfig
+$ make flash.bin
+$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984
+
+Flash the binary into the SD card
+=================================
+
+Burn the flash.bin binary to SD card offset 32KB:
+
+$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
+
+Boot
+====
+Set Boot switch SW2: 1100.
diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
new file mode 100644
index 0000000..e69efc4
--- /dev/null
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <linux/libfdt.h>
+#include <environment.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/imx8-pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
+ (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+ (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
+ (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+
+static iomux_cfg_t uart0_pads[] = {
+ SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads));
+}
+
+int board_early_init_f(void)
+{
+ int ret;
+ /* Set UART0 clock root to 80 MHz */
+ sc_pm_clock_rate_t rate = 80000000;
+
+ /* Power up UART0 */
+ ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
+ if (ret)
+ return ret;
+
+ ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
+ if (ret)
+ return ret;
+
+ /* Enable UART0 clock root */
+ ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+ if (ret)
+ return ret;
+
+ setup_iomux_uart();
+
+ sc_pm_set_resource_power_mode(-1, SC_R_GPIO_5, SC_PM_PW_MODE_ON);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_DM_GPIO)
+static void board_gpio_init(void)
+{
+ /* TODO */
+}
+#else
+static inline void board_gpio_init(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_FEC_MXC)
+#include <miiphy.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+#endif
+
+void build_info(void)
+{
+ u32 sc_build = 0, sc_commit = 0;
+
+ /* Get SCFW build and commit id */
+ sc_misc_build_info(-1, &sc_build, &sc_commit);
+ if (!sc_build) {
+ printf("SCFW does not support build info\n");
+ sc_commit = 0; /* Display 0 when the build info is not supported*/
+ }
+ printf("Build: SCFW %x\n", sc_commit);
+}
+
+int checkboard(void)
+{
+ puts("Board: iMX8QM MEK\n");
+
+ build_info();
+ print_bootinfo();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Power up base board */
+ sc_pm_set_resource_power_mode(-1, SC_R_BOARD_R1, SC_PM_PW_MODE_ON);
+
+ board_gpio_init();
+
+ return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+ puts("\nDDR ");
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+ /* TODO */
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return 0;
+}
+#endif
+
+int board_mmc_get_env_dev(int devno)
+{
+ return devno;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ env_set("board_name", "MEK");
+ env_set("board_rev", "iMX8QM");
+#endif
+
+ return 0;
+}
diff --git a/board/freescale/imx8qm_mek/imximage.cfg b/board/freescale/imx8qm_mek/imximage.cfg
new file mode 100644
index 0000000..7dc6b93
--- /dev/null
+++ b/board/freescale/imx8qm_mek/imximage.cfg
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#define __ASSEMBLY__
+
+/* Boot from SD, sector size 0x400 */
+BOOT_FROM SD 0x400
+/* SoC type IMX8QM */
+SOC_TYPE IMX8QM
+/* Append seco container image */
+APPEND mx8qm-ahab-container.img
+/* Create the 2nd container */
+CONTAINER
+/* Add scfw image with exec attribute */
+IMAGE SCU mx8qm-mek-scfw-tcm.bin
+/* Add ATF image with exec attribute */
+IMAGE A35 spl/u-boot-spl.bin 0x00100000
diff --git a/board/freescale/imx8qm_mek/spl.c b/board/freescale/imx8qm_mek/spl.c
new file mode 100644
index 0000000..95ce9f3
--- /dev/null
+++ b/board/freescale/imx8qm_mek/spl.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void spl_board_init(void)
+{
+ struct udevice *dev;
+ int offset;
+
+ uclass_find_first_device(UCLASS_MISC, &dev);
+
+ for (; dev; uclass_find_next_device(&dev)) {
+ if (device_probe(dev))
+ continue;
+ }
+
+ offset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "nxp,imx8-pd");
+ while (offset != -FDT_ERR_NOTFOUND) {
+ lists_bind_fdt(gd->dm_root, offset_to_ofnode(offset),
+ NULL, true);
+ offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
+ "nxp,imx8-pd");
+ }
+
+ uclass_find_first_device(UCLASS_POWER_DOMAIN, &dev);
+
+ for (; dev; uclass_find_next_device(&dev)) {
+ if (device_probe(dev))
+ continue;
+ }
+
+ arch_cpu_init();
+
+ board_early_init_f();
+
+ timer_init();
+
+ preloader_console_init();
+
+ puts("Normal Boot\n");
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+ /* Clear global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ board_init_r(NULL, 0);
+}
diff --git a/board/freescale/imx8qxp_mek/spl.c b/board/freescale/imx8qxp_mek/spl.c
index 95ce9f3..cb4006e 100644
--- a/board/freescale/imx8qxp_mek/spl.c
+++ b/board/freescale/imx8qxp_mek/spl.c
@@ -18,7 +18,6 @@
void spl_board_init(void)
{
struct udevice *dev;
- int offset;
uclass_find_first_device(UCLASS_MISC, &dev);
@@ -27,21 +26,6 @@
continue;
}
- offset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "nxp,imx8-pd");
- while (offset != -FDT_ERR_NOTFOUND) {
- lists_bind_fdt(gd->dm_root, offset_to_ofnode(offset),
- NULL, true);
- offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
- "nxp,imx8-pd");
- }
-
- uclass_find_first_device(UCLASS_POWER_DOMAIN, &dev);
-
- for (; dev; uclass_find_next_device(&dev)) {
- if (device_probe(dev))
- continue;
- }
-
arch_cpu_init();
board_early_init_f();
diff --git a/board/k+p/bootscripts/tpcboot.cmd b/board/k+p/bootscripts/tpcboot.cmd
index 0576e81..b81494d 100644
--- a/board/k+p/bootscripts/tpcboot.cmd
+++ b/board/k+p/bootscripts/tpcboot.cmd
@@ -27,6 +27,12 @@
if test '${boardsoc}' = 'imx53'; then
setenv bootargs '${bootargs} di=${dig_in} key1=${key1}';
fi;"
+setenv nfsadj "
+if test '${boardsoc}' = 'imx53'; then
+ if test '${boardtype}' = 'hsc'; then
+ setenv bootargs '${bootargs} dsa_core.blacklist=yes';
+ fi;
+fi;"
setenv boot_fitImage "
setenv fdt_conf 'conf@${boardsoc}-${boardname}.dtb';
setenv itbcfg "\"#\${fdt_conf}\"";
@@ -72,6 +78,7 @@
if run download_kernel; then
run nfsargs;
run addip;
+ run nfsadj;
setenv bootargs '${bootargs}' console=${console};
run boot_fitImage;
diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index becb6a6..b447e13 100644
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -13,14 +13,10 @@
#include <asm/arch/iomux-mx53.h>
#include <asm/arch/clock.h>
#include <asm/gpio.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include "kp_id_rev.h"
-#define VBUS_PWR_EN IMX_GPIO_NR(7, 8)
-#define PHY_nRST IMX_GPIO_NR(7, 6)
#define BOOSTER_OFF IMX_GPIO_NR(2, 23)
#define LCD_BACKLIGHT IMX_GPIO_NR(1, 1)
#define KEY1 IMX_GPIO_NR(2, 26)
@@ -45,59 +41,6 @@
return 0;
}
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- gpio_request(VBUS_PWR_EN, "VBUS_PWR_EN");
- gpio_direction_output(VBUS_PWR_EN, 1);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[] = {
- {MMC_SDHC3_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- return 1; /* eMMC is always present */
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
- int ret;
-
- static const iomux_v3_cfg_t sd3_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
- };
-
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- imx_iomux_v3_setup_multiple_pads(sd3_pads, ARRAY_SIZE(sd3_pads));
-
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
- if (ret)
- return ret;
-
- return 0;
-}
-#endif
-
static int power_init(void)
{
struct udevice *dev;
@@ -168,17 +111,6 @@
return 0;
}
-void eth_phy_reset(void)
-{
- gpio_request(PHY_nRST, "PHY_nRST");
- gpio_direction_output(PHY_nRST, 1);
- udelay(50);
- gpio_set_value(PHY_nRST, 0);
- udelay(400);
- gpio_set_value(PHY_nRST, 1);
- udelay(50);
-}
-
void board_disable_display(void)
{
gpio_request(LCD_BACKLIGHT, "LCD_BACKLIGHT");
@@ -210,8 +142,6 @@
if (ret)
printf("Error %d reading EEPROM content!\n", ret);
- eth_phy_reset();
-
show_eeprom();
read_board_id();
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index 767d13d..e63b19d 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -13,10 +13,8 @@
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/io.h>
#include <common.h>
-#include <fsl_esdhc.h>
#include <i2c.h>
#include <miiphy.h>
-#include <mmc.h>
#include <netdev.h>
#include <usb.h>
#include <power/pmic.h>
@@ -28,9 +26,6 @@
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
- PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
-
#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM)
@@ -126,20 +121,6 @@
MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
- MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
#ifdef CONFIG_FEC_MXC
static iomux_v3_cfg_t const fec1_pads[] = {
MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
@@ -165,7 +146,7 @@
static void setup_iomux_fec(void)
{
imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
-
+ gpio_request(FEC1_RST_GPIO, "phy_rst");
gpio_direction_output(FEC1_RST_GPIO, 0);
udelay(500);
gpio_set_value(FEC1_RST_GPIO, 1);
@@ -224,25 +205,6 @@
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
}
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC3_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- /* Assume uSDHC3 emmc is always present */
- return 1;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads));
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -291,6 +253,8 @@
void setup_lcd(void)
{
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+ gpio_request(IMX_GPIO_NR(1, 11), "lcd_brightness");
+ gpio_request(IMX_GPIO_NR(1, 6), "lcd_enable");
/* Set Brightness to high */
gpio_direction_output(IMX_GPIO_NR(1, 11) , 1);
/* Set LCD enable to high */
diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c
index 8c34438..92a4646 100644
--- a/board/technexion/pico-imx7d/spl.c
+++ b/board/technexion/pico-imx7d/spl.c
@@ -5,11 +5,15 @@
* Author: Richard Hu <richard.hu@technexion.com>
*/
+#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx7-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch-mx7/mx7-ddr.h>
+#include <asm/mach-imx/iomux-v3.h>
#include <asm/gpio.h>
+#include <fsl_esdhc.h>
#include <spl.h>
#if defined(CONFIG_SPL_BUILD)
@@ -119,4 +123,38 @@
void reset_cpu(ulong addr)
{
}
+
+#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+ PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ {USDHC3_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ /* Assume uSDHC3 emmc is always present */
+ return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
#endif
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index fcb49a0..21addaf 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2018 Toradex AG
+ * Copyright (C) 2018-2019 Toradex AG
*/
#include <common.h>
+
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
@@ -14,47 +15,30 @@
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
-#include <common.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <fdt_support.h>
-#include <fsl_esdhc.h>
#include <imx_thermal.h>
#include <jffs2/load_kernel.h>
#include <linux/sizes.h>
-#include <mmc.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <netdev.h>
-#include <usb.h>
-#include <usb/ehci-ci.h>
+
#include "../common/tdx-common.h"
+#include "../common/tdx-cfg-block.h"
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_40ohm)
-
-#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm)
-
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
PAD_CTL_DSE_48ohm)
+#define MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR 0x2290040
+
#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
-#define USB_CDET_GPIO IMX_GPIO_NR(7, 14)
-
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -62,56 +46,13 @@
return 0;
}
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RTS_B__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_CTS_B__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-#ifdef CONFIG_FSL_ESDHC
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-#endif
-
-static iomux_v3_cfg_t const usb_cdet_pads[] = {
- MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
#ifdef CONFIG_NAND_MXS
-static iomux_v3_cfg_t const gpmi_pads[] = {
- MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
-};
-
static void setup_gpmi_nand(void)
{
- imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
-
setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
(3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
}
-#endif
+#endif /* CONFIG_NAND_MXS */
#ifdef CONFIG_VIDEO_MXS
static iomux_v3_cfg_t const lcd_pads[] = {
@@ -168,100 +109,24 @@
#endif
#ifdef CONFIG_FEC_MXC
-static iomux_v3_cfg_t const fec2_pads[] = {
- MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
- MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-static void setup_iomux_fec(void)
-{
- imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
-}
-#endif
-
-static void setup_iomux_uart(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0)
-
-static struct fsl_esdhc_cfg usdhc_cfg[] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /* USDHC1 is mmc0 */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
- ARRAY_SIZE(usdhc1_pads));
- gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_FEC_MXC
-
static int setup_fec(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- setup_iomux_fec();
-
/* provide the PHY clock from the i.MX 6 */
ret = enable_fec_anatop_clock(1, ENET_50MHZ);
if (ret)
return ret;
- /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */
+ /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK,
IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+ /* give new Ethernet PHY power save mode circuitry time to settle */
+ mdelay(300);
+
return 0;
}
@@ -271,14 +136,7 @@
phydev->drv->config(phydev);
return 0;
}
-#endif
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
-
- return 0;
-}
+#endif /* CONFIG_FEC_MXC */
int board_init(void)
{
@@ -297,11 +155,6 @@
setup_lcd();
#endif
-#ifdef CONFIG_USB_EHCI_MX6
- imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads));
- gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
-#endif
-
return 0;
}
@@ -317,10 +170,23 @@
int board_late_init(void)
{
- int minc, maxc;
-
- if (get_cpu_temp_grade(&minc, &maxc) != TEMP_COMMERCIAL)
+#ifdef CONFIG_TDX_CFG_BLOCK
+ /*
+ * If we have a valid config block and it says we are a module with
+ * Wi-Fi/Bluetooth make sure we use the -wifi device tree.
+ */
+ if (tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT_IT ||
+ tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT)
env_set("variant", "-wifi");
+#endif
+
+ /*
+ * Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
+ * SOC to request for a lower voltage during sleep. This is necessary
+ * because the voltage is changing too slow for the SOC to wake up
+ * properly.
+ */
+ __raw_writel(0x8080, MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
@@ -362,41 +228,6 @@
}
#endif
-#ifdef CONFIG_USB_EHCI_MX6
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
- MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_ehci_hcd_init(int port)
-{
- switch (port) {
- case 0:
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
- ARRAY_SIZE(usb_otg2_pads));
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-int board_usb_phy_mode(int port)
-{
- switch (port) {
- case 0:
- if (gpio_get_value(USB_CDET_GPIO))
- return USB_INIT_DEVICE;
- else
- return USB_INIT_HOST;
- case 1:
- default:
- return USB_INIT_HOST;
- }
-}
-#endif
-
static struct mxc_serial_platdata mxc_serial_plat = {
.reg = (struct mxc_uart *)UART1_BASE,
.use_dte = 1,
diff --git a/board/toradex/colibri_vf/MAINTAINERS b/board/toradex/colibri_vf/MAINTAINERS
index 3ee2b33..66b2150 100644
--- a/board/toradex/colibri_vf/MAINTAINERS
+++ b/board/toradex/colibri_vf/MAINTAINERS
@@ -1,7 +1,7 @@
Colibri VFxx
M: Stefan Agner <stefan.agner@toradex.com>
W: http://developer.toradex.com/software/linux/linux-software
-W: https://www.toradex.com/community
+W: https://www.toradex.com/community
S: Maintained
F: board/toradex/colibri_vf/
F: include/configs/colibri_vf.h
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index b90077b..f69c443 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -1,12 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (c) 2016 Toradex, Inc.
+ * Copyright (c) 2016-2019 Toradex, Inc.
*/
#include <common.h>
#include "tdx-cfg-block.h"
-#if defined(CONFIG_TARGET_APALIS_IMX6) || defined(CONFIG_TARGET_COLIBRI_IMX6)
+#if defined(CONFIG_TARGET_APALIS_IMX6) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX6) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX8QXP)
#include <asm/arch/sys_proto.h>
#else
#define is_cpu_type(cpu) (0)
@@ -92,12 +94,22 @@
[34] = "Apalis TK1 2GB",
[35] = "Apalis iMX6 Dual 1GB IT",
[36] = "Colibri iMX6ULL 256MB",
- [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / Bluetooth",
- [38] = "Colibri iMX8X",
+ [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT",
+ [38] = "Colibri iMX8 QuadXPlus 2GB Wi-Fi / BT IT",
[39] = "Colibri iMX7 Dual 1GB (eMMC)",
- [40] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth IT",
+ [40] = "Colibri iMX6ULL 512MB Wi-Fi / BT IT",
[41] = "Colibri iMX7 Dual 512MB EPDC",
[42] = "Apalis TK1 4GB",
+ [43] = "Colibri T20 512MB IT SETEK",
+ [44] = "Colibri iMX6ULL 512MB IT",
+ [45] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth",
+ [46] = "Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT",
+ [47] = "Apalis iMX8 QuadMax 4GB IT",
+ [48] = "Apalis iMX8 QuadPlus 2GB Wi-Fi / BT",
+ [49] = "Apalis iMX8 QuadPlus 2GB",
+ [50] = "Colibri iMX8 QuadXPlus 2GB IT",
+ [51] = "Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth",
+ [52] = "Colibri iMX8 DualX 1GB",
};
#ifdef CONFIG_TDX_CFG_BLOCK_IS_IN_MMC
@@ -277,6 +289,9 @@
char it = 'n';
int len;
+ /* Unknown module by default */
+ tdx_hw_tag.prodid = 0;
+
if (cpu_is_pxa27x())
sprintf(message, "Is the module the 312 MHz version? [y/N] ");
else
@@ -287,34 +302,56 @@
soc = env_get("soc");
if (!strcmp("mx6", soc)) {
-#ifdef CONFIG_MACH_TYPE
- if (it == 'y' || it == 'Y')
+#ifdef CONFIG_TARGET_APALIS_IMX6
+ if (it == 'y' || it == 'Y') {
if (is_cpu_type(MXC_CPU_MX6Q))
tdx_hw_tag.prodid = APALIS_IMX6Q_IT;
else
tdx_hw_tag.prodid = APALIS_IMX6D_IT;
- else
+ } else {
if (is_cpu_type(MXC_CPU_MX6Q))
tdx_hw_tag.prodid = APALIS_IMX6Q;
else
tdx_hw_tag.prodid = APALIS_IMX6D;
-#else
- if (it == 'y' || it == 'Y')
+ }
+#elif CONFIG_TARGET_COLIBRI_IMX6
+ if (it == 'y' || it == 'Y') {
if (is_cpu_type(MXC_CPU_MX6DL))
tdx_hw_tag.prodid = COLIBRI_IMX6DL_IT;
- else
+ else if (is_cpu_type(MXC_CPU_MX6SOLO))
tdx_hw_tag.prodid = COLIBRI_IMX6S_IT;
- else
+ } else {
if (is_cpu_type(MXC_CPU_MX6DL))
tdx_hw_tag.prodid = COLIBRI_IMX6DL;
- else
+ else if (is_cpu_type(MXC_CPU_MX6SOLO))
tdx_hw_tag.prodid = COLIBRI_IMX6S;
-#endif /* CONFIG_MACH_TYPE */
- } else if (!strcmp("imx7d", soc)) {
+ }
+#elif CONFIG_TARGET_COLIBRI_IMX6ULL
+ char wb = 'n';
+
+ sprintf(message, "Does the module have Wi-Fi / Bluetooth? " \
+ "[y/N] ");
+ len = cli_readline(message);
+ wb = console_buffer[0];
+ if (it == 'y' || it == 'Y') {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT_IT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_IT;
+ } else {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL;
+ }
+#endif
+ } else if (!strcmp("imx7d", soc))
tdx_hw_tag.prodid = COLIBRI_IMX7D;
- } else if (!strcmp("imx7s", soc)) {
+ else if (!strcmp("imx7s", soc))
tdx_hw_tag.prodid = COLIBRI_IMX7S;
- } else if (!strcmp("tegra20", soc)) {
+ else if (is_cpu_type(MXC_CPU_IMX8QXP))
+ tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
+ else if (!strcmp("tegra20", soc)) {
if (it == 'y' || it == 'Y')
if (gd->ram_size == 0x10000000)
tdx_hw_tag.prodid = COLIBRI_T20_256MB_IT;
@@ -330,8 +367,9 @@
tdx_hw_tag.prodid = COLIBRI_PXA270_312MHZ;
else
tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ;
+ }
#ifdef CONFIG_MACH_TYPE
- } else if (!strcmp("tegra30", soc)) {
+ else if (!strcmp("tegra30", soc)) {
if (CONFIG_MACH_TYPE == MACH_TYPE_APALIS_T30) {
if (it == 'y' || it == 'Y')
tdx_hw_tag.prodid = APALIS_T30_IT;
@@ -346,8 +384,9 @@
else
tdx_hw_tag.prodid = COLIBRI_T30;
}
+ }
#endif /* CONFIG_MACH_TYPE */
- } else if (!strcmp("tegra124", soc)) {
+ else if (!strcmp("tegra124", soc)) {
tdx_hw_tag.prodid = APALIS_TK1_2GB;
} else if (!strcmp("vf500", soc)) {
if (it == 'y' || it == 'Y')
@@ -359,7 +398,9 @@
tdx_hw_tag.prodid = COLIBRI_VF61_IT;
else
tdx_hw_tag.prodid = COLIBRI_VF61;
- } else {
+ }
+
+ if (!tdx_hw_tag.prodid) {
printf("Module type not detectable due to unknown SoC\n");
return -1;
}
@@ -373,7 +414,7 @@
tdx_hw_tag.ver_minor = console_buffer[2] - '0';
tdx_hw_tag.ver_assembly = console_buffer[3] - 'A';
- if (cpu_is_pxa27x() && (tdx_hw_tag.ver_major == 1))
+ if (cpu_is_pxa27x() && tdx_hw_tag.ver_major == 1)
tdx_hw_tag.prodid -= (COLIBRI_PXA270_312MHZ -
COLIBRI_PXA270_V1_312MHZ);
@@ -441,7 +482,8 @@
* On NAND devices, recreation is only allowed if the page is
* empty (config block invalid...)
*/
- printf("NAND erase block %d need to be erased before creating a Toradex config block\n",
+ printf("NAND erase block %d need to be erased before creating" \
+ " a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET /
get_nand_dev_by_index(0)->erasesize);
goto out;
@@ -450,7 +492,8 @@
* On NOR devices, recreation is only allowed if the sector is
* empty and write protection is off (config block invalid...)
*/
- printf("NOR sector at offset 0x%02x need to be erased and unprotected before creating a Toradex config block\n",
+ printf("NOR sector at offset 0x%02x need to be erased and " \
+ "unprotected before creating a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET);
goto out;
#else
diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h
index da60e78..bfdc8b7 100644
--- a/board/toradex/common/tdx-cfg-block.h
+++ b/board/toradex/common/tdx-cfg-block.h
@@ -25,42 +25,54 @@
COLIBRI_PXA270_V1_520MHZ,
COLIBRI_PXA320,
COLIBRI_PXA300,
- COLIBRI_PXA310,
+ COLIBRI_PXA310, /* 5 */
COLIBRI_PXA320_IT,
COLIBRI_PXA300_XT,
COLIBRI_PXA270_312MHZ,
COLIBRI_PXA270_520MHZ,
- COLIBRI_VF50, /* not currently on sale */
- COLIBRI_VF61,
+ COLIBRI_VF50, /* 10 */
+ COLIBRI_VF61, /* not currently on sale */
COLIBRI_VF61_IT,
COLIBRI_VF50_IT,
COLIBRI_IMX6S,
- COLIBRI_IMX6DL,
+ COLIBRI_IMX6DL, /* 15 */
COLIBRI_IMX6S_IT,
COLIBRI_IMX6DL_IT,
+ /* 18 */
+ /* 19 */
COLIBRI_T20_256MB = 20,
COLIBRI_T20_512MB,
COLIBRI_T20_512MB_IT,
COLIBRI_T30,
COLIBRI_T20_256MB_IT,
- APALIS_T30_2GB,
+ APALIS_T30_2GB, /* 25 */
APALIS_T30_1GB,
APALIS_IMX6Q,
APALIS_IMX6Q_IT,
APALIS_IMX6D,
- COLIBRI_T30_IT,
+ COLIBRI_T30_IT, /* 30 */
APALIS_T30_IT,
COLIBRI_IMX7S,
COLIBRI_IMX7D,
APALIS_TK1_2GB,
- APALIS_IMX6D_IT,
+ APALIS_IMX6D_IT, /* 35 */
COLIBRI_IMX6ULL,
- APALIS_IMX8QM, /* 37 */
- COLIBRI_IMX8X,
+ APALIS_IMX8QM_WIFI_BT_IT,
+ COLIBRI_IMX8QXP_WIFI_BT_IT,
COLIBRI_IMX7D_EMMC,
COLIBRI_IMX6ULL_WIFI_BT_IT, /* 40 */
COLIBRI_IMX7D_EPDC,
- APALIS_TK1_4GB,
+ APALIS_TK1_4GB, /* not currently on sale */
+ COLIBRI_T20_512MB_IT_SETEK,
+ COLIBRI_IMX6ULL_IT,
+ COLIBRI_IMX6ULL_WIFI_BT, /* 45 */
+ APALIS_IMX8QXP_WIFI_BT_IT,
+ APALIS_IMX8QM_IT,
+ APALIS_IMX8QP_WIFI_BT,
+ APALIS_IMX8QP,
+ COLIBRI_IMX8QXP_IT, /* 50 */
+ COLIBRI_IMX8DX_WIFI_BT,
+ COLIBRI_IMX8DX,
};
extern const char * const toradex_modules[];
diff --git a/board/variscite/dart_6ul/Kconfig b/board/variscite/dart_6ul/Kconfig
new file mode 100644
index 0000000..1765af1
--- /dev/null
+++ b/board/variscite/dart_6ul/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_DART_6UL
+
+config SYS_BOARD
+ default "dart_6ul"
+
+config SYS_VENDOR
+ default "variscite"
+
+config SYS_CONFIG_NAME
+ default "dart_6ul"
+
+endif
diff --git a/board/variscite/dart_6ul/MAINTAINERS b/board/variscite/dart_6ul/MAINTAINERS
new file mode 100644
index 0000000..339f93f
--- /dev/null
+++ b/board/variscite/dart_6ul/MAINTAINERS
@@ -0,0 +1,8 @@
+MX6UL_DART BOARD
+M: Parthiban Nallathambi <parthitce@gmail.com>
+S: Maintained
+F: arch/arm/dts/imx6ull-dart-6ul.dts
+F: arch/arm/dts/imx6ull-dart-6ul.dtsi
+F: board/variscite/dart_6ul/
+F: configs/variscite_dart6ul_defconfig
+F: include/configs/dart_6ul.h
diff --git a/board/variscite/dart_6ul/Makefile b/board/variscite/dart_6ul/Makefile
new file mode 100644
index 0000000..48aa361
--- /dev/null
+++ b/board/variscite/dart_6ul/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := dart_6ul.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/variscite/dart_6ul/README b/board/variscite/dart_6ul/README
new file mode 100644
index 0000000..d76b997
--- /dev/null
+++ b/board/variscite/dart_6ul/README
@@ -0,0 +1,41 @@
+How to use U-Boot on variscite DART-6UL Evaluation Kit
+------------------------------------------------------
+
+- Configure and build U-Boot for DART-6UL iMX6ULL:
+
+ $ make mrproper
+ $ make variscite_dart6ul_defconfig
+ $ make
+
+ This will generate SPL and u-boot-dtb.img images.
+
+Boot from MMC/SD:
+- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card:
+
+ $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+ $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Boot mode settings:
+
+ Boot switch position: SW1 -> 0
+ SW2 -> 0
+
+Boot from eMMC:
+- if bootpart is not enabled by default, to enable under Linux
+ echo 0 >/sys/block/mmcblk1boot0/force_ro
+ mmc bootpart enable 1 1 /dev/mmcblk1boot0
+
+- Flash the SPL and u-boot-dtb.img to mmcblk1boot0
+ $ sudo dd if=SPL of=/dev/mmcblk1boot0 bs=1k seek=1; sync
+ $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk1boot0 bs=1k seek=69; sync
+
+- Boot mode settings:
+
+ Boot switch position: SW1 -> 0
+ SW2 -> 1
+
+- Connect the Serial cable to UART0 and the PC for the console.
+
+- Insert the micro SD card in the board and power it up.
+
+- U-Boot messages should come up.
diff --git a/board/variscite/dart_6ul/dart_6ul.c b/board/variscite/dart_6ul/dart_6ul.c
new file mode 100644
index 0000000..4765595
--- /dev/null
+++ b/board/variscite/dart_6ul/dart_6ul.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2019 Variscite Ltd.
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <fsl_esdhc.h>
+#include <linux/bitops.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+#ifdef CONFIG_NAND_MXS
+#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+ PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+static iomux_v3_cfg_t const nand_pads[] = {
+ MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NAND_DQS__RAWNAND_DQS | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+};
+
+static void setup_gpmi_nand(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* config gpmi nand iomux */
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+
+ clrbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /*
+ * config gpmi and bch clock to 100 MHz
+ * bch/gpmi select PLL2 PFD2 400M
+ * 100M = 400M / 4
+ */
+ clrbits_le32(&mxc_ccm->cscmr1,
+ MXC_CCM_CSCMR1_BCH_CLK_SEL |
+ MXC_CCM_CSCMR1_GPMI_CLK_SEL);
+ clrsetbits_le32(&mxc_ccm->cscdr1,
+ MXC_CCM_CSCDR1_BCH_PODF_MASK |
+ MXC_CCM_CSCDR1_GPMI_PODF_MASK,
+ (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+ (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+
+ /* enable gpmi and bch clock gating */
+ setbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+ /* enable apbh clock gating */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+#define ENET_CLK_PAD_CTRL (PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | \
+ PAD_CTL_SRE_FAST)
+#define MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST | \
+ PAD_CTL_ODE)
+/*
+ * pin conflicts for fec1 and fec2, GPIO1_IO06 and GPIO1_IO07 can only
+ * be used for ENET1 or ENET2, cannot be used for both.
+ */
+static iomux_v3_cfg_t const fec1_pads[] = {
+ MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
+ MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const fec2_pads[] = {
+ MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
+ MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(int fec_id)
+{
+ if (fec_id == 0)
+ imx_iomux_v3_setup_multiple_pads(fec1_pads,
+ ARRAY_SIZE(fec1_pads));
+ else
+ imx_iomux_v3_setup_multiple_pads(fec2_pads,
+ ARRAY_SIZE(fec2_pads));
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+ ret = fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV,
+ CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+
+#if defined(CONFIG_CI_UDC) && defined(CONFIG_USB_ETHER)
+ /* USB Ethernet Gadget */
+ usb_eth_initialize(bis);
+#endif
+ return ret;
+}
+
+static int setup_fec(int fec_id)
+{
+ struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int ret;
+
+ if (fec_id == 0) {
+ /*
+ * Use 50M anatop loopback REF_CLK1 for ENET1,
+ * clear gpr1[13], set gpr1[17].
+ */
+ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+ IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+ } else {
+ /*
+ * Use 50M anatop loopback REF_CLK2 for ENET2,
+ * clear gpr1[14], set gpr1[18].
+ */
+ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK,
+ IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+ }
+
+ ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ);
+ if (ret)
+ return ret;
+
+ enable_enet_clk(1);
+
+ return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ /*
+ * Defaults + Enable status LEDs (LED1: Activity, LED0: Link) & select
+ * 50 MHz RMII clock mode.
+ */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+#endif /* CONFIG_FEC_MXC */
+
+int board_early_init_f(void)
+{
+ setup_iomux_fec(CONFIG_FEC_ENET_DEV);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+ setup_fec(CONFIG_FEC_ENET_DEV);
+#endif
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
+#endif
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Variscite DART-6UL Evaluation Kit\n");
+
+ return 0;
+}
diff --git a/board/variscite/dart_6ul/spl.c b/board/variscite/dart_6ul/spl.c
new file mode 100644
index 0000000..f7e6ab6
--- /dev/null
+++ b/board/variscite/dart_6ul/spl.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2019 Variscite Ltd.
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/crm_regs.h>
+#include <fsl_esdhc.h>
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_addds = 0x00000030,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_ddrpke = 0x00000000,
+ .grp_ddrmode = 0x00020000,
+ .grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_dqm0 = 0x00000030,
+ .dram_dqm1 = 0x00000030,
+ .dram_ras = 0x00000030,
+ .dram_cas = 0x00000030,
+ .dram_odt0 = 0x00000030,
+ .dram_odt1 = 0x00000030,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdclk_0 = 0x00000008,
+ .dram_sdqs0 = 0x00000038,
+ .dram_sdqs1 = 0x00000030,
+ .dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x00000000,
+ .p0_mpdgctrl0 = 0x414C0158,
+ .p0_mprddlctl = 0x40403A3A,
+ .p0_mpwrdlctl = 0x40405A56,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+ .dsize = 0,
+ .cs_density = 20,
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 2,
+ .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0xFFFFFFFF, &ccm->CCGR0);
+ writel(0xFFFFFFFF, &ccm->CCGR1);
+ writel(0xFFFFFFFF, &ccm->CCGR2);
+ writel(0xFFFFFFFF, &ccm->CCGR3);
+ writel(0xFFFFFFFF, &ccm->CCGR4);
+ writel(0xFFFFFFFF, &ccm->CCGR5);
+ writel(0xFFFFFFFF, &ccm->CCGR6);
+ writel(0xFFFFFFFF, &ccm->CCGR7);
+ /* Enable Audio Clock for SOM codec */
+ writel(0x01130100, (long *)CCM_CCOSR);
+}
+
+static void spl_dram_init(void)
+{
+ mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+ MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+#ifndef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+#endif
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+ {
+ .esdhc_base = USDHC1_BASE_ADDR,
+ .max_bus_width = 4,
+ },
+#ifndef CONFIG_NAND_MXS
+ {
+ .esdhc_base = USDHC2_BASE_ADDR,
+ .max_bus_width = 8,
+ },
+#endif
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int i, ret;
+
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ SETUP_IOMUX_PADS(usdhc1_pads);
+ usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ break;
+#ifndef CONFIG_NAND_MXS
+ case 1:
+ SETUP_IOMUX_PADS(usdhc2_pads);
+ usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+#endif
+ default:
+ printf("Warning - USDHC%d controller not supporting\n",
+ i + 1);
+ return 0;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret) {
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ ccgr_init();
+
+ /* setup GP timer */
+ timer_init();
+
+ setup_iomux_uart();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index 2882dc9..134a6c9 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -14,7 +14,6 @@
#include <asm/io.h>
#include <common.h>
#include <asm/arch/crm_regs.h>
-#include <usb.h>
#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
@@ -128,11 +127,6 @@
return 0;
}
-int board_usb_phy_mode(int port)
-{
- return USB_INIT_DEVICE;
-}
-
int board_late_init(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index bbd73a4..3dbb4d9 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -1,6 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_THUMB_BUILD=y
-# CONFIG_SPL_SYS_THUMB_BUILD is not set
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x87800000
CONFIG_TARGET_COLIBRI_IMX6ULL=y
@@ -16,24 +15,27 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
+# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_ASKENV=y
+CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-# CONFIG_RANDOM_UUID is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_NAND_TORTURE=y
CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx6ull-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
@@ -48,6 +50,7 @@
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_NAND=y
@@ -55,26 +58,25 @@
CONFIG_NAND_MXS_DT=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PHYLIB=y
-CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_SDP=y
CONFIG_VIDEO=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 5a43ee8..449f4f9 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -41,6 +41,7 @@
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index 61137d3..0bb2fc6 100644
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -55,7 +55,10 @@
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)"
CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
+CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_PCF8575_GPIO=y
CONFIG_LED=y
@@ -85,4 +88,3 @@
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_FAT_WRITE=y
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
new file mode 100644
index 0000000..238d44d
--- /dev/null
+++ b/configs/imx8qm_mek_defconfig
@@ -0,0 +1,75 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_IMX8QM_MEK=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_LOG=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_FAT=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_DM_GPIO=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC_SHARE_MDIO=y
+CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 45593ea..2fb2fdf 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -4,7 +4,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_IMX8QXP_MEK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
@@ -23,10 +23,12 @@
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_CLK=y
CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig
index 3a6ef44..a6a727b 100644
--- a/configs/kp_imx53_defconfig
+++ b/configs/kp_imx53_defconfig
@@ -31,6 +31,7 @@
CONFIG_ENV_IS_IN_MMC=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0x1
+CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_SMSC=y
CONFIG_FEC_MXC=y
@@ -39,8 +40,10 @@
CONFIG_PINCTRL_IMX5=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_PMIC_MC34708=y
+CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_CONS_INDEX=2
CONFIG_MXC_UART=y
CONFIG_USB=y
+CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index d884c87..fe1a94e 100644
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -59,6 +59,7 @@
CONFIG_PHY_MICREL=y
CONFIG_RTC_M41T62=y
CONFIG_USB=y
+CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
index 44f1c36..ffb821e 100644
--- a/configs/mx51evk_defconfig
+++ b/configs/mx51evk_defconfig
@@ -26,6 +26,7 @@
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
index 836f1bf..a7adeff 100644
--- a/configs/mx53loco_defconfig
+++ b/configs/mx53loco_defconfig
@@ -26,6 +26,7 @@
CONFIG_FSL_ESDHC=y
CONFIG_MII=y
CONFIG_USB=y
+CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index daa74dd..6c3818d 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -45,7 +45,9 @@
CONFIG_PINCTRL_IMX5=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
-CONFIG_VIDEO_IPUV3=y
+CONFIG_USB_EHCI_MX5=y
+CONFIG_USB_STORAGE=y
CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_IMX_WATCHDOG=y
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index cc6dfde..ea27731 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -31,6 +31,7 @@
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index e1cdc9b..fb7e714 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -30,6 +30,7 @@
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index bb85d67..446a6d4 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -30,6 +30,7 @@
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index cc6f837..f8dd7f3 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -30,6 +30,7 @@
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)"
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
index 14a08ee..33f2a0a 100644
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@@ -16,6 +16,8 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-hobbit"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
@@ -26,10 +28,14 @@
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
@@ -59,4 +65,3 @@
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
index 29b0745..41374a3 100644
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@@ -16,6 +16,8 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="ask"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
@@ -26,6 +28,10 @@
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
@@ -59,4 +65,3 @@
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index 9e1efbb..81d19df 100644
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@@ -16,6 +16,8 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
@@ -26,10 +28,14 @@
CONFIG_CMD_BOOTMENU=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
@@ -59,4 +65,3 @@
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_VIDEO=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
index 568316f..3c1eaf6 100644
--- a/configs/usbarmory_defconfig
+++ b/configs/usbarmory_defconfig
@@ -15,4 +15,5 @@
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_USB=y
+CONFIG_USB_EHCI_MX5=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/variscite_dart6ul_defconfig b/configs/variscite_dart6ul_defconfig
new file mode 100644
index 0000000..a1cdd05
--- /dev/null
+++ b/configs/variscite_dart6ul_defconfig
@@ -0,0 +1,55 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x86000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_DART_6UL=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+# CONFIG_CMD_DEKBLOB is not set
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_NET=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-dart-6ul"
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_MXC_UART=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Variscite"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_LZO=y
diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig
index 6eaf152..300dc38 100644
--- a/configs/warp7_bl33_defconfig
+++ b/configs/warp7_bl33_defconfig
@@ -38,7 +38,10 @@
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_GADGET=y
diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig
index efd8860..1b5356c 100644
--- a/configs/warp7_defconfig
+++ b/configs/warp7_defconfig
@@ -47,8 +47,11 @@
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
CONFIG_OPTEE=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_GADGET=y
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 5505ae5..eb379c1 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -3,3 +3,8 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_CLK_IMX8) += clk-imx8.o
+
+ifdef CONFIG_CLK_IMX8
+obj-$(CONFIG_IMX8QXP) += clk-imx8qxp.o
+obj-$(CONFIG_IMX8QM) += clk-imx8qm.o
+endif
diff --git a/drivers/clk/imx/clk-imx8.c b/drivers/clk/imx/clk-imx8.c
index d03fcc2..a755e26 100644
--- a/drivers/clk/imx/clk-imx8.c
+++ b/drivers/clk/imx/clk-imx8.c
@@ -13,302 +13,21 @@
#include <dt-bindings/soc/imx_rsrc.h>
#include <misc.h>
-struct imx8_clks {
- ulong id;
- const char *name;
-};
-
-#if CONFIG_IS_ENABLED(CMD_CLK)
-static struct imx8_clks imx8_clk_names[] = {
- { IMX8QXP_A35_DIV, "A35_DIV" },
- { IMX8QXP_I2C0_CLK, "I2C0" },
- { IMX8QXP_I2C1_CLK, "I2C1" },
- { IMX8QXP_I2C2_CLK, "I2C2" },
- { IMX8QXP_I2C3_CLK, "I2C3" },
- { IMX8QXP_UART0_CLK, "UART0" },
- { IMX8QXP_UART1_CLK, "UART1" },
- { IMX8QXP_UART2_CLK, "UART2" },
- { IMX8QXP_UART3_CLK, "UART3" },
- { IMX8QXP_SDHC0_CLK, "SDHC0" },
- { IMX8QXP_SDHC1_CLK, "SDHC1" },
- { IMX8QXP_ENET0_AHB_CLK, "ENET0_AHB" },
- { IMX8QXP_ENET0_IPG_CLK, "ENET0_IPG" },
- { IMX8QXP_ENET0_REF_DIV, "ENET0_REF" },
- { IMX8QXP_ENET0_PTP_CLK, "ENET0_PTP" },
- { IMX8QXP_ENET1_AHB_CLK, "ENET1_AHB" },
- { IMX8QXP_ENET1_IPG_CLK, "ENET1_IPG" },
- { IMX8QXP_ENET1_REF_DIV, "ENET1_REF" },
- { IMX8QXP_ENET1_PTP_CLK, "ENET1_PTP" },
-};
-#endif
+#include "clk-imx8.h"
-static ulong imx8_clk_get_rate(struct clk *clk)
+__weak ulong imx8_clk_get_rate(struct clk *clk)
{
- sc_pm_clk_t pm_clk;
- ulong rate;
- u16 resource;
- int ret;
-
- debug("%s(#%lu)\n", __func__, clk->id);
-
- switch (clk->id) {
- case IMX8QXP_A35_DIV:
- resource = SC_R_A35;
- pm_clk = SC_PM_CLK_CPU;
- break;
- case IMX8QXP_I2C0_CLK:
- resource = SC_R_I2C_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C1_CLK:
- resource = SC_R_I2C_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C2_CLK:
- resource = SC_R_I2C_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C3_CLK:
- resource = SC_R_I2C_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC0_IPG_CLK:
- case IMX8QXP_SDHC0_CLK:
- case IMX8QXP_SDHC0_DIV:
- resource = SC_R_SDHC_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC1_IPG_CLK:
- case IMX8QXP_SDHC1_CLK:
- case IMX8QXP_SDHC1_DIV:
- resource = SC_R_SDHC_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART0_IPG_CLK:
- case IMX8QXP_UART0_CLK:
- resource = SC_R_UART_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART1_CLK:
- resource = SC_R_UART_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART2_CLK:
- resource = SC_R_UART_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART3_CLK:
- resource = SC_R_UART_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET0_IPG_CLK:
- case IMX8QXP_ENET0_AHB_CLK:
- case IMX8QXP_ENET0_REF_DIV:
- case IMX8QXP_ENET0_PTP_CLK:
- resource = SC_R_ENET_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET1_IPG_CLK:
- case IMX8QXP_ENET1_AHB_CLK:
- case IMX8QXP_ENET1_REF_DIV:
- case IMX8QXP_ENET1_PTP_CLK:
- resource = SC_R_ENET_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- default:
- if (clk->id < IMX8QXP_UART0_IPG_CLK ||
- clk->id >= IMX8QXP_CLK_END) {
- printf("%s(Invalid clk ID #%lu)\n",
- __func__, clk->id);
- return -EINVAL;
- }
- return -ENOTSUPP;
- };
-
- ret = sc_pm_get_clock_rate(-1, resource, pm_clk,
- (sc_pm_clock_rate_t *)&rate);
- if (ret) {
- printf("%s err %d\n", __func__, ret);
- return ret;
- }
-
- return rate;
+ return 0;
}
-static ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate)
+__weak ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate)
{
- sc_pm_clk_t pm_clk;
- u32 new_rate = rate;
- u16 resource;
- int ret;
-
- debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
-
- switch (clk->id) {
- case IMX8QXP_I2C0_CLK:
- resource = SC_R_I2C_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C1_CLK:
- resource = SC_R_I2C_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C2_CLK:
- resource = SC_R_I2C_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C3_CLK:
- resource = SC_R_I2C_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART0_CLK:
- resource = SC_R_UART_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART1_CLK:
- resource = SC_R_UART_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART2_CLK:
- resource = SC_R_UART_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART3_CLK:
- resource = SC_R_UART_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC0_IPG_CLK:
- case IMX8QXP_SDHC0_CLK:
- case IMX8QXP_SDHC0_DIV:
- resource = SC_R_SDHC_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC1_SEL:
- case IMX8QXP_SDHC0_SEL:
- return 0;
- case IMX8QXP_SDHC1_IPG_CLK:
- case IMX8QXP_SDHC1_CLK:
- case IMX8QXP_SDHC1_DIV:
- resource = SC_R_SDHC_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET0_IPG_CLK:
- case IMX8QXP_ENET0_AHB_CLK:
- case IMX8QXP_ENET0_REF_DIV:
- case IMX8QXP_ENET0_PTP_CLK:
- resource = SC_R_ENET_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET1_IPG_CLK:
- case IMX8QXP_ENET1_AHB_CLK:
- case IMX8QXP_ENET1_REF_DIV:
- case IMX8QXP_ENET1_PTP_CLK:
- resource = SC_R_ENET_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- default:
- if (clk->id < IMX8QXP_UART0_IPG_CLK ||
- clk->id >= IMX8QXP_CLK_END) {
- printf("%s(Invalid clk ID #%lu)\n",
- __func__, clk->id);
- return -EINVAL;
- }
- return -ENOTSUPP;
- };
-
- ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate);
- if (ret) {
- printf("%s err %d\n", __func__, ret);
- return ret;
- }
-
- return new_rate;
+ return 0;
}
-static int __imx8_clk_enable(struct clk *clk, bool enable)
+__weak int __imx8_clk_enable(struct clk *clk, bool enable)
{
- sc_pm_clk_t pm_clk;
- u16 resource;
- int ret;
-
- debug("%s(#%lu)\n", __func__, clk->id);
-
- switch (clk->id) {
- case IMX8QXP_I2C0_CLK:
- resource = SC_R_I2C_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C1_CLK:
- resource = SC_R_I2C_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C2_CLK:
- resource = SC_R_I2C_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_I2C3_CLK:
- resource = SC_R_I2C_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART0_CLK:
- resource = SC_R_UART_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART1_CLK:
- resource = SC_R_UART_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART2_CLK:
- resource = SC_R_UART_2;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_UART3_CLK:
- resource = SC_R_UART_3;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC0_IPG_CLK:
- case IMX8QXP_SDHC0_CLK:
- case IMX8QXP_SDHC0_DIV:
- resource = SC_R_SDHC_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_SDHC1_IPG_CLK:
- case IMX8QXP_SDHC1_CLK:
- case IMX8QXP_SDHC1_DIV:
- resource = SC_R_SDHC_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET0_IPG_CLK:
- case IMX8QXP_ENET0_AHB_CLK:
- case IMX8QXP_ENET0_REF_DIV:
- case IMX8QXP_ENET0_PTP_CLK:
- resource = SC_R_ENET_0;
- pm_clk = SC_PM_CLK_PER;
- break;
- case IMX8QXP_ENET1_IPG_CLK:
- case IMX8QXP_ENET1_AHB_CLK:
- case IMX8QXP_ENET1_REF_DIV:
- case IMX8QXP_ENET1_PTP_CLK:
- resource = SC_R_ENET_1;
- pm_clk = SC_PM_CLK_PER;
- break;
- default:
- if (clk->id < IMX8QXP_UART0_IPG_CLK ||
- clk->id >= IMX8QXP_CLK_END) {
- printf("%s(Invalid clk ID #%lu)\n",
- __func__, clk->id);
- return -EINVAL;
- }
- return -ENOTSUPP;
- }
-
- ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0);
- if (ret) {
- printf("%s err %d\n", __func__, ret);
- return ret;
- }
-
- return 0;
+ return -ENOTSUPP;
}
static int imx8_clk_disable(struct clk *clk)
@@ -336,7 +55,7 @@
printf("Clk\t\tHz\n");
- for (i = 0; i < ARRAY_SIZE(imx8_clk_names); i++) {
+ for (i = 0; i < num_clks; i++) {
clk.id = imx8_clk_names[i].id;
ret = clk_request(dev, &clk);
if (ret < 0) {
@@ -382,6 +101,7 @@
static const struct udevice_id imx8_clk_ids[] = {
{ .compatible = "fsl,imx8qxp-clk" },
+ { .compatible = "fsl,imx8qm-clk" },
{ },
};
diff --git a/drivers/clk/imx/clk-imx8.h b/drivers/clk/imx/clk-imx8.h
new file mode 100644
index 0000000..68ad675
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+struct imx8_clks {
+ ulong id;
+ const char *name;
+};
+
+#if CONFIG_IS_ENABLED(CMD_CLK)
+extern struct imx8_clks imx8_clk_names[];
+extern int num_clks;
+#endif
+
+ulong imx8_clk_get_rate(struct clk *clk);
+ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate);
+int __imx8_clk_enable(struct clk *clk, bool enable);
diff --git a/drivers/clk/imx/clk-imx8qm.c b/drivers/clk/imx/clk-imx8qm.c
new file mode 100644
index 0000000..6b5561e
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8qm.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/clock.h>
+#include <dt-bindings/clock/imx8qm-clock.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <misc.h>
+
+#include "clk-imx8.h"
+
+#if CONFIG_IS_ENABLED(CMD_CLK)
+struct imx8_clks imx8_clk_names[] = {
+ { IMX8QM_A53_DIV, "A53_DIV" },
+ { IMX8QM_UART0_CLK, "UART0" },
+ { IMX8QM_UART1_CLK, "UART1" },
+ { IMX8QM_UART2_CLK, "UART2" },
+ { IMX8QM_UART3_CLK, "UART3" },
+ { IMX8QM_SDHC0_CLK, "SDHC0" },
+ { IMX8QM_SDHC1_CLK, "SDHC1" },
+ { IMX8QM_SDHC2_CLK, "SDHC2" },
+ { IMX8QM_ENET0_AHB_CLK, "ENET0_AHB" },
+ { IMX8QM_ENET0_IPG_CLK, "ENET0_IPG" },
+ { IMX8QM_ENET0_REF_DIV, "ENET0_REF" },
+ { IMX8QM_ENET0_PTP_CLK, "ENET0_PTP" },
+ { IMX8QM_ENET1_AHB_CLK, "ENET1_AHB" },
+ { IMX8QM_ENET1_IPG_CLK, "ENET1_IPG" },
+ { IMX8QM_ENET1_REF_DIV, "ENET1_REF" },
+ { IMX8QM_ENET1_PTP_CLK, "ENET1_PTP" },
+};
+
+int num_clks = ARRAY_SIZE(imx8_clk_names);
+#endif
+
+ulong imx8_clk_get_rate(struct clk *clk)
+{
+ sc_pm_clk_t pm_clk;
+ ulong rate;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ switch (clk->id) {
+ case IMX8QM_A53_DIV:
+ resource = SC_R_A53;
+ pm_clk = SC_PM_CLK_CPU;
+ break;
+ case IMX8QM_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC0_IPG_CLK:
+ case IMX8QM_SDHC0_CLK:
+ case IMX8QM_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC1_IPG_CLK:
+ case IMX8QM_SDHC1_CLK:
+ case IMX8QM_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART0_IPG_CLK:
+ case IMX8QM_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET0_IPG_CLK:
+ case IMX8QM_ENET0_AHB_CLK:
+ case IMX8QM_ENET0_REF_DIV:
+ case IMX8QM_ENET0_PTP_CLK:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET1_IPG_CLK:
+ case IMX8QM_ENET1_AHB_CLK:
+ case IMX8QM_ENET1_REF_DIV:
+ case IMX8QM_ENET1_PTP_CLK:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QM_UART0_IPG_CLK ||
+ clk->id >= IMX8QM_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ };
+
+ ret = sc_pm_get_clock_rate(-1, resource, pm_clk,
+ (sc_pm_clock_rate_t *)&rate);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return rate;
+}
+
+ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ sc_pm_clk_t pm_clk;
+ u32 new_rate = rate;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
+
+ switch (clk->id) {
+ case IMX8QM_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC0_IPG_CLK:
+ case IMX8QM_SDHC0_CLK:
+ case IMX8QM_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC1_IPG_CLK:
+ case IMX8QM_SDHC1_CLK:
+ case IMX8QM_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET0_IPG_CLK:
+ case IMX8QM_ENET0_AHB_CLK:
+ case IMX8QM_ENET0_REF_DIV:
+ case IMX8QM_ENET0_PTP_CLK:
+ case IMX8QM_ENET0_ROOT_DIV:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET1_IPG_CLK:
+ case IMX8QM_ENET1_AHB_CLK:
+ case IMX8QM_ENET1_REF_DIV:
+ case IMX8QM_ENET1_PTP_CLK:
+ case IMX8QM_ENET1_ROOT_DIV:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QM_UART0_IPG_CLK ||
+ clk->id >= IMX8QM_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ };
+
+ ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return new_rate;
+}
+
+int __imx8_clk_enable(struct clk *clk, bool enable)
+{
+ sc_pm_clk_t pm_clk;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ switch (clk->id) {
+ case IMX8QM_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC0_IPG_CLK:
+ case IMX8QM_SDHC0_CLK:
+ case IMX8QM_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_SDHC1_IPG_CLK:
+ case IMX8QM_SDHC1_CLK:
+ case IMX8QM_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET0_IPG_CLK:
+ case IMX8QM_ENET0_AHB_CLK:
+ case IMX8QM_ENET0_REF_DIV:
+ case IMX8QM_ENET0_PTP_CLK:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QM_ENET1_IPG_CLK:
+ case IMX8QM_ENET1_AHB_CLK:
+ case IMX8QM_ENET1_REF_DIV:
+ case IMX8QM_ENET1_PTP_CLK:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QM_UART0_IPG_CLK ||
+ clk->id >= IMX8QM_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ }
+
+ ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
new file mode 100644
index 0000000..1fca36a
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/clock.h>
+#include <dt-bindings/clock/imx8qxp-clock.h>
+#include <dt-bindings/soc/imx_rsrc.h>
+#include <misc.h>
+
+#include "clk-imx8.h"
+
+#if CONFIG_IS_ENABLED(CMD_CLK)
+struct imx8_clks imx8_clk_names[] = {
+ { IMX8QXP_A35_DIV, "A35_DIV" },
+ { IMX8QXP_I2C0_CLK, "I2C0" },
+ { IMX8QXP_I2C1_CLK, "I2C1" },
+ { IMX8QXP_I2C2_CLK, "I2C2" },
+ { IMX8QXP_I2C3_CLK, "I2C3" },
+ { IMX8QXP_UART0_CLK, "UART0" },
+ { IMX8QXP_UART1_CLK, "UART1" },
+ { IMX8QXP_UART2_CLK, "UART2" },
+ { IMX8QXP_UART3_CLK, "UART3" },
+ { IMX8QXP_SDHC0_CLK, "SDHC0" },
+ { IMX8QXP_SDHC1_CLK, "SDHC1" },
+ { IMX8QXP_ENET0_AHB_CLK, "ENET0_AHB" },
+ { IMX8QXP_ENET0_IPG_CLK, "ENET0_IPG" },
+ { IMX8QXP_ENET0_REF_DIV, "ENET0_REF" },
+ { IMX8QXP_ENET0_PTP_CLK, "ENET0_PTP" },
+ { IMX8QXP_ENET1_AHB_CLK, "ENET1_AHB" },
+ { IMX8QXP_ENET1_IPG_CLK, "ENET1_IPG" },
+ { IMX8QXP_ENET1_REF_DIV, "ENET1_REF" },
+ { IMX8QXP_ENET1_PTP_CLK, "ENET1_PTP" },
+};
+
+int num_clks = ARRAY_SIZE(imx8_clk_names);
+#endif
+
+ulong imx8_clk_get_rate(struct clk *clk)
+{
+ sc_pm_clk_t pm_clk;
+ ulong rate;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ switch (clk->id) {
+ case IMX8QXP_A35_DIV:
+ resource = SC_R_A35;
+ pm_clk = SC_PM_CLK_CPU;
+ break;
+ case IMX8QXP_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC0_IPG_CLK:
+ case IMX8QXP_SDHC0_CLK:
+ case IMX8QXP_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC1_IPG_CLK:
+ case IMX8QXP_SDHC1_CLK:
+ case IMX8QXP_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART0_IPG_CLK:
+ case IMX8QXP_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET0_IPG_CLK:
+ case IMX8QXP_ENET0_AHB_CLK:
+ case IMX8QXP_ENET0_REF_DIV:
+ case IMX8QXP_ENET0_PTP_CLK:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET1_IPG_CLK:
+ case IMX8QXP_ENET1_AHB_CLK:
+ case IMX8QXP_ENET1_REF_DIV:
+ case IMX8QXP_ENET1_PTP_CLK:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QXP_UART0_IPG_CLK ||
+ clk->id >= IMX8QXP_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ };
+
+ ret = sc_pm_get_clock_rate(-1, resource, pm_clk,
+ (sc_pm_clock_rate_t *)&rate);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return rate;
+}
+
+ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ sc_pm_clk_t pm_clk;
+ u32 new_rate = rate;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
+
+ switch (clk->id) {
+ case IMX8QXP_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC0_IPG_CLK:
+ case IMX8QXP_SDHC0_CLK:
+ case IMX8QXP_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC1_SEL:
+ case IMX8QXP_SDHC0_SEL:
+ return 0;
+ case IMX8QXP_SDHC1_IPG_CLK:
+ case IMX8QXP_SDHC1_CLK:
+ case IMX8QXP_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET0_IPG_CLK:
+ case IMX8QXP_ENET0_AHB_CLK:
+ case IMX8QXP_ENET0_REF_DIV:
+ case IMX8QXP_ENET0_PTP_CLK:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET1_IPG_CLK:
+ case IMX8QXP_ENET1_AHB_CLK:
+ case IMX8QXP_ENET1_REF_DIV:
+ case IMX8QXP_ENET1_PTP_CLK:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QXP_UART0_IPG_CLK ||
+ clk->id >= IMX8QXP_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ };
+
+ ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return new_rate;
+}
+
+int __imx8_clk_enable(struct clk *clk, bool enable)
+{
+ sc_pm_clk_t pm_clk;
+ u16 resource;
+ int ret;
+
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ switch (clk->id) {
+ case IMX8QXP_I2C0_CLK:
+ resource = SC_R_I2C_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C1_CLK:
+ resource = SC_R_I2C_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C2_CLK:
+ resource = SC_R_I2C_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_I2C3_CLK:
+ resource = SC_R_I2C_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART0_CLK:
+ resource = SC_R_UART_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART1_CLK:
+ resource = SC_R_UART_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART2_CLK:
+ resource = SC_R_UART_2;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_UART3_CLK:
+ resource = SC_R_UART_3;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC0_IPG_CLK:
+ case IMX8QXP_SDHC0_CLK:
+ case IMX8QXP_SDHC0_DIV:
+ resource = SC_R_SDHC_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_SDHC1_IPG_CLK:
+ case IMX8QXP_SDHC1_CLK:
+ case IMX8QXP_SDHC1_DIV:
+ resource = SC_R_SDHC_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET0_IPG_CLK:
+ case IMX8QXP_ENET0_AHB_CLK:
+ case IMX8QXP_ENET0_REF_DIV:
+ case IMX8QXP_ENET0_PTP_CLK:
+ resource = SC_R_ENET_0;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ case IMX8QXP_ENET1_IPG_CLK:
+ case IMX8QXP_ENET1_AHB_CLK:
+ case IMX8QXP_ENET1_REF_DIV:
+ case IMX8QXP_ENET1_PTP_CLK:
+ resource = SC_R_ENET_1;
+ pm_clk = SC_PM_CLK_PER;
+ break;
+ default:
+ if (clk->id < IMX8QXP_UART0_IPG_CLK ||
+ clk->id >= IMX8QXP_CLK_END) {
+ printf("%s(Invalid clk ID #%lu)\n",
+ __func__, clk->id);
+ return -EINVAL;
+ }
+ return -ENOTSUPP;
+ }
+
+ ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0);
+ if (ret) {
+ printf("%s err %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/drivers/ddr/imx/imx8m/Kconfig b/drivers/ddr/imx/imx8m/Kconfig
index 71f466f..a83b0f4 100644
--- a/drivers/ddr/imx/imx8m/Kconfig
+++ b/drivers/ddr/imx/imx8m/Kconfig
@@ -1,3 +1,6 @@
+menu "i.MX8M DDR controllers"
+ depends on ARCH_IMX8M
+
config IMX8M_DRAM
bool "imx8m dram"
@@ -20,3 +23,4 @@
info into memory for low power use. OCRAM_S is used for this
purpose on i.MX8MM.
default 0x180000
+endmenu
diff --git a/drivers/misc/imx8/Makefile b/drivers/misc/imx8/Makefile
index ee05893..48fdb5b 100644
--- a/drivers/misc/imx8/Makefile
+++ b/drivers/misc/imx8/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y += scu_api.o scu.o
+obj-$(CONFIG_CMD_FUSE) += fuse.o
diff --git a/drivers/misc/imx8/fuse.c b/drivers/misc/imx8/fuse.c
new file mode 100644
index 0000000..29d2256
--- /dev/null
+++ b/drivers/misc/imx8/fuse.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <console.h>
+#include <errno.h>
+#include <fuse.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FSL_ECC_WORD_START_1 0x10
+#define FSL_ECC_WORD_END_1 0x10F
+
+#ifdef CONFIG_IMX8QXP
+#define FSL_ECC_WORD_START_2 0x220
+#define FSL_ECC_WORD_END_2 0x31F
+
+#define FSL_QXP_FUSE_GAP_START 0x110
+#define FSL_QXP_FUSE_GAP_END 0x21F
+#endif
+
+#define FSL_SIP_OTP_READ 0xc200000A
+#define FSL_SIP_OTP_WRITE 0xc200000B
+
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+ return fuse_sense(bank, word, val);
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+ unsigned long ret = 0, value = 0;
+
+ if (bank != 0) {
+ printf("Invalid bank argument, ONLY bank 0 is supported\n");
+ return -EINVAL;
+ }
+
+ ret = call_imx_sip_ret2(FSL_SIP_OTP_READ, (unsigned long)word, &value,
+ 0, 0);
+ *val = (u32)value;
+
+ return ret;
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+ if (bank != 0) {
+ printf("Invalid bank argument, ONLY bank 0 is supported\n");
+ return -EINVAL;
+ }
+
+ if (IS_ENABLED(CONFIG_IMX8QXP)) {
+ if (word >= FSL_QXP_FUSE_GAP_START &&
+ word <= FSL_QXP_FUSE_GAP_END) {
+ printf("Invalid word argument for this SoC\n");
+ return -EINVAL;
+ }
+ }
+
+ if ((word >= FSL_ECC_WORD_START_1 && word <= FSL_ECC_WORD_END_1) ||
+ (word >= FSL_ECC_WORD_START_2 && word <= FSL_ECC_WORD_END_2)) {
+ puts("Warning: Words in this index range have ECC protection\n"
+ "and can only be programmed once per word. Individual bit\n"
+ "operations will be rejected after the first one.\n"
+ "\n\n Really program this word? <y/N>\n");
+
+ if (!confirm_yesno()) {
+ puts("Word programming aborted\n");
+ return -EPERM;
+ }
+ }
+
+ return call_imx_sip(FSL_SIP_OTP_WRITE, (unsigned long)word,
+ (unsigned long)val, 0);
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+ printf("Override fuse to i.MX8 in u-boot is forbidden\n");
+ return -EPERM;
+}
diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c
index 1b9c49c..9ec0045 100644
--- a/drivers/misc/imx8/scu.c
+++ b/drivers/misc/imx8/scu.c
@@ -219,11 +219,21 @@
int ret;
struct udevice *child;
int node;
+ char *clk_compatible, *iomuxc_compatible;
+
+ if (IS_ENABLED(CONFIG_IMX8QXP)) {
+ clk_compatible = "fsl,imx8qxp-clk";
+ iomuxc_compatible = "fsl,imx8qxp-iomuxc";
+ } else if (IS_ENABLED(CONFIG_IMX8QM)) {
+ clk_compatible = "fsl,imx8qm-clk";
+ iomuxc_compatible = "fsl,imx8qm-iomuxc";
+ } else {
+ return -EINVAL;
+ }
debug("%s(dev=%p)\n", __func__, dev);
- node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
- "fsl,imx8qxp-clk");
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, clk_compatible);
if (node < 0)
panic("No clk node found\n");
@@ -234,7 +244,7 @@
plat->clk = child;
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
- "fsl,imx8qxp-iomuxc");
+ iomuxc_compatible);
if (node < 0)
panic("No iomuxc node found\n");
diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
index f84fe88..1b945e9 100644
--- a/drivers/misc/mxc_ocotp.c
+++ b/drivers/misc/mxc_ocotp.c
@@ -321,6 +321,11 @@
struct ocotp_regs *regs;
int ret;
+ if (is_imx8mq() && is_soc_rev(CHIP_REV_2_1)) {
+ printf("mxc_ocotp %s(): fuse sense is disabled\n", __func__);
+ return -EPERM;
+ }
+
ret = prepare_read(®s, bank, word, val, __func__);
if (ret)
return ret;
@@ -354,13 +359,17 @@
/* Only bank 0 and 1 are redundancy mode, others are ECC mode */
if (bank != 0 && bank != 1) {
- ret = fuse_sense(bank, word, &val);
- if (ret)
- return ret;
+ if ((soc_rev() < CHIP_REV_2_0) ||
+ ((soc_rev() >= CHIP_REV_2_0) &&
+ bank != 9 && bank != 10 && bank != 28)) {
+ ret = fuse_sense(bank, word, &val);
+ if (ret)
+ return ret;
- if (val != 0) {
- printf("mxc_ocotp: The word has been programmed, no more write\n");
- return -EPERM;
+ if (val != 0) {
+ printf("mxc_ocotp: The word has been programmed, no more write\n");
+ return -EPERM;
+ }
}
}
#endif
diff --git a/drivers/pinctrl/nxp/pinctrl-imx8.c b/drivers/pinctrl/nxp/pinctrl-imx8.c
index 0738da0..c1b0ca4 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx8.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx8.c
@@ -25,6 +25,7 @@
static const struct udevice_id imx8_pinctrl_match[] = {
{ .compatible = "fsl,imx8qxp-iomuxc", .data = (ulong)&imx8_pinctrl_soc_info },
+ { .compatible = "fsl,imx8qm-iomuxc", .data = (ulong)&imx8_pinctrl_soc_info },
{ /* sentinel */ }
};
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0fbc115..1c2212f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -132,6 +132,13 @@
---help---
Enables support for the on-chip EHCI controller on MVEBU SoCs.
+config USB_EHCI_MX5
+ bool "Support for i.MX5 on-chip EHCI USB controller"
+ depends on ARCH_MX5
+ default n
+ help
+ Enables support for the on-chip EHCI controller on i.MX5 SoCs.
+
config USB_EHCI_MX6
bool "Support for i.MX6 on-chip EHCI USB controller"
depends on ARCH_MX6
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index 60f1470..0b32728 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -12,6 +12,8 @@
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
+#include <dm.h>
+#include <power/regulator.h>
#include "ehci.h"
@@ -223,6 +225,7 @@
mdelay(50);
}
+#if !CONFIG_IS_ENABLED(DM_USB)
static const struct ehci_ops mx5_ehci_ops = {
.powerup_fixup = mx5_ehci_powerup_fixup,
};
@@ -267,3 +270,103 @@
{
return 0;
}
+#else /* CONFIG_IS_ENABLED(DM_USB) */
+struct ehci_mx5_priv_data {
+ struct ehci_ctrl ctrl;
+ struct usb_ehci *ehci;
+ struct udevice *vbus_supply;
+ enum usb_init_type init_type;
+ int portnr;
+};
+
+static const struct ehci_ops mx5_ehci_ops = {
+ .powerup_fixup = mx5_ehci_powerup_fixup,
+};
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ const char *mode;
+
+ mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "dr_mode", NULL);
+ if (mode) {
+ if (strcmp(mode, "peripheral") == 0)
+ plat->init_type = USB_INIT_DEVICE;
+ else if (strcmp(mode, "host") == 0)
+ plat->init_type = USB_INIT_HOST;
+ else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ struct usb_ehci *ehci = (struct usb_ehci *)devfdt_get_addr(dev);
+ struct ehci_mx5_priv_data *priv = dev_get_priv(dev);
+ enum usb_init_type type = plat->init_type;
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ int ret;
+
+ set_usboh3_clk();
+ enable_usboh3_clk(true);
+ set_usb_phy_clk();
+ enable_usb_phy1_clk(true);
+ enable_usb_phy2_clk(true);
+ mdelay(1);
+
+ priv->ehci = ehci;
+ priv->portnr = dev->seq;
+ priv->init_type = type;
+
+ ret = device_get_supply_regulator(dev, "vbus-supply",
+ &priv->vbus_supply);
+ if (ret)
+ debug("%s: No vbus supply\n", dev->name);
+
+ if (!ret && priv->vbus_supply) {
+ ret = regulator_set_enable(priv->vbus_supply,
+ (type == USB_INIT_DEVICE) ?
+ false : true);
+ if (ret) {
+ puts("Error enabling VBUS supply\n");
+ return ret;
+ }
+ }
+
+ hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ hcor = (struct ehci_hcor *)((uint32_t)hccr +
+ HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
+ setbits_le32(&ehci->usbmode, CM_HOST);
+
+ __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+
+ mxc_set_usbcontrol(priv->portnr, CONFIG_MXC_USB_FLAGS);
+ mdelay(10);
+
+ return ehci_register(dev, hccr, hcor, &mx5_ehci_ops, 0,
+ priv->init_type);
+}
+
+static const struct udevice_id mx5_usb_ids[] = {
+ { .compatible = "fsl,imx53-usb" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_mx5) = {
+ .name = "ehci_mx5",
+ .id = UCLASS_USB,
+ .of_match = mx5_usb_ids,
+ .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+ .probe = ehci_usb_probe,
+ .remove = ehci_deregister,
+ .ops = &ehci_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct ehci_mx5_priv_data),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif /* !CONFIG_IS_ENABLED(DM_USB) */
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 96169f5..91054d8 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -138,12 +138,12 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
- "fdt_addr_r=0x12000000\0" \
+ "fdt_addr_r=0x12100000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
- "ramdisk_addr_r=0x12100000\0" \
+ "ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 7cf550c..fc39e80 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2019 Toradex AG
*
* Configuration settings for the Colibri iMX6ULL module.
*
@@ -19,10 +19,6 @@
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
/* Network */
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE 16352
#define CONFIG_TFTP_TSIZE
@@ -30,7 +26,7 @@
/* ENET1 */
#define IMX_FEC_BASE ENET2_BASE_ADDR
-/* MMC Config*/
+/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
@@ -48,12 +44,12 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
- "fdt_addr_r=0x82000000\0" \
+ "fdt_addr_r=0x82100000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"pxefile_addr_r=0x87100000\0" \
- "ramdisk_addr_r=0x82100000\0" \
+ "ramdisk_addr_r=0x82200000\0" \
"scriptaddr=0x87000000\0"
#define NFS_BOOTCMD \
@@ -182,4 +178,4 @@
#define CONFIG_VIDEO_BMP_LOGO
#endif
-#endif
+#endif /* __COLIBRI_IMX6ULL_CONFIG_H */
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 803c9be..129a424 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -115,25 +115,31 @@
"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
#define EMMC_BOOTCMD \
- "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \
+ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
+ "rw,noatime rootfstype=ext4 " \
"rootwait\0" \
- "emmcboot=run setup; " \
+ "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
"${vidargs}; echo Booting from internal eMMC chip...; " \
- "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
+ "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
+ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
"bootz ${kernel_addr_r} ${dtbparam}\0" \
- "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+ "emmcbootpart=1\0" \
+ "emmcdev=0\0" \
+ "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
+ "${fdt_addr_r} ${fdt_file} && " \
+ "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
+ "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
+ "emmcrootpart=2\0"
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
- "fdt_addr_r=0x12000000\0" \
+ "fdt_addr_r=0x12100000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
- "ramdisk_addr_r=0x12100000\0" \
+ "ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \
@@ -147,27 +153,40 @@
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
#define SD_BOOTCMD \
- "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \
- "rootwait\0" \
- "sdboot=run setup; " \
+ "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
+ "rootfstype=ext4 rootwait\0" \
+ "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
"${vidargs}; echo Booting from SD card; " \
- "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
+ "run sddtbload; load mmc ${sddev}:${sdbootpart} "\
+ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
"bootz ${kernel_addr_r} ${dtbparam}\0" \
- "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+ "sdbootpart=1\0" \
+ "sddev=1\0" \
+ "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
+ "${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
+ "${fdt_addr_r}\" && true\0" \
+ "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+ "sdrootpart=2\0"
#define USB_BOOTCMD \
- "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext4 " \
- "rootwait\0" \
- "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+ "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw,noatime " \
+ "rootfstype=ext4 rootwait\0" \
+ "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
+ "setenv bootargs ${defargs} ${setupargs} " \
"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
- "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+ "run usbdtbload; " \
+ "load usb ${usbdev}:${usbbootpart} ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
"bootz ${kernel_addr_r} ${dtbparam}\0" \
- "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+ "usbbootpart=1\0" \
+ "usbdev=0\0" \
+ "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
+ "${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && " \
+ "true\0" \
+ "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
+ "usbrootpart=2\0"
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -186,6 +205,7 @@
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
+ USB_BOOTCMD \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h
new file mode 100644
index 0000000..fb1b899
--- /dev/null
+++ b/include/configs/dart_6ul.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board configuration file for Variscite DART-6UL Evaluation Kit
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ */
+#ifndef __DART_6UL_H
+#define __DART_6UL_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* SPL options */
+#include "imx6_spl.h"
+
+/* NAND pin conflicts with usdhc2 */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_FSL_USDHC_NUM 1
+#else
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#endif
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_ENET_DEV 0
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "eth0"
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x3
+#define CONFIG_FEC_XCV_TYPE RMII
+#define CONFIG_ETHPRIME "eth1"
+#endif
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+/* Environment settings */
+#define CONFIG_ENV_SIZE SZ_8K
+#define CONFIG_ENV_OFFSET (14 * SZ_64K)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+
+/* Environment in SD */
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 0
+#define MMC_ROOTFS_DEV 0
+#define MMC_ROOTFS_PART 2
+
+/* Console configs */
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* MMC Configs */
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* I2C configs */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE SZ_512M
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+#define CONFIG_IMX_THERMAL
+
+#define ENV_MMC \
+ "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
+ "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
+ "fitpart=1\0" \
+ "bootdelay=3\0" \
+ "silent=1\0" \
+ "optargs=rw rootwait\0" \
+ "mmcautodetect=yes\0" \
+ "mmcrootfstype=ext4\0" \
+ "mmcfit_name=fitImage\0" \
+ "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
+ "${mmcfit_name}\0" \
+ "mmcargs=setenv bootargs " \
+ "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
+ "console=${console} rootfstype=${mmcrootfstype}\0" \
+ "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffff\0" \
+ "console=ttymxc0,115200n8\0" \
+ "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
+ "fit_addr=0x82000000\0" \
+ ENV_MMC
+
+#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit"
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif /* __DART_6UL_H */
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index ad45b10..dbf5665 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -46,11 +46,11 @@
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcargs=setenv bootargs console=${console},${baudrate}" \
- " root=PARTUUID=${uuid} rootwait rw\0 ${mtdparts}\0" \
+ " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
"nandargs=setenv bootargs console=${console},${baudrate}" \
- " ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \
+ " ubi.mtd=fs root=${nandroot} ${mtdparts} ${optargs}\0" \
"ramargs=setenv bootargs console=${console},${baudrate}" \
- " root=/dev/ram rw ${mtdparts}\0" \
+ " root=/dev/ram rw ${mtdparts} ${optargs}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...;" \
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
new file mode 100644
index 0000000..02c5d1c
--- /dev/null
+++ b/include/configs/imx8qm_mek.h
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __IMX8QM_MEK_H
+#define __IMX8QM_MEK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_TEXT_BASE 0x0
+#define CONFIG_SPL_MAX_SIZE (124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
+
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK 0x013E000
+#define CONFIG_SPL_BSS_START_ADDR 0x00128000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
+#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_MALLOC_F_ADDR 0x00120000
+
+#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
+
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#define CONFIG_OF_EMBED
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_BOARD_SETUP
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define USDHC1_BASE_ADDR 0x5B010000
+#define USDHC2_BASE_ADDR 0x5B020000
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=Image\0" \
+ "panel=NULL\0" \
+ "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
+ "fdt_addr=0x83000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "boot_fdt=try\0" \
+ "fdt_file=fsl-imx8qxp-mek.dtb\0" \
+ "initrd_addr=0x83800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "else " \
+ "echo wait for boot; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${loadaddr} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "else " \
+ "booti; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
+
+/* Default environment is in SD */
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_OFFSET (64 * SZ_64K)
+#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_2 0x880000000
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
+#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
+
+/* Serial */
+#define CONFIG_BAUDRATE 115200
+
+/* Monitor Command Prompt */
+#define CONFIG_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 8000000 /* 8MHz */
+
+/* Networking */
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define FEC_QUIRK_ENET_MAC
+
+#endif /* __IMX8QM_MEK_H */
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 949cdb6..18ea5a8 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -64,11 +64,11 @@
"script=boot.scr\0" \
"image=Image\0" \
"panel=NULL\0" \
- "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
+ "console=ttyLP0,${baudrate} earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"boot_fdt=try\0" \
- "fdt_file=fsl-imx8qxp-mek.dtb\0" \
+ "fdt_file=imx8qxp-mek.dtb\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
@@ -158,7 +158,6 @@
#define CONFIG_BAUDRATE 115200
/* Monitor Command Prompt */
-#define CONFIG_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_MAXARGS 64
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index 3ea75fa..a252e90 100644
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -15,14 +15,7 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
-/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
/* USB Configs */
-#define CONFIG_USB_EHCI_MX5
-#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
@@ -57,7 +50,7 @@
"setexpr blkc ${blkc} + 1; " \
"mmc write ${loadaddr} 0x2 ${blkc}" \
"; fi\0" \
- "upwic=setenv wic_file kp-image-kp${boardsoc}${boardtype}.wic; "\
+ "upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\
"if tftp ${loadaddr} ${wic_file}; then " \
"setexpr blkc ${filesize} / 0x200; " \
"setexpr blkc ${blkc} + 1; " \
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index 9edb6c9..fc0b1f4 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -118,7 +118,6 @@
* USB
*/
#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 9bf9773..f5fd01d 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -61,7 +61,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 1e3ea88..9bf5d91 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -41,7 +41,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 2d18f05..4f17908 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -38,7 +38,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index f002324..2d6715c 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -37,7 +37,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 2423dfa..e318a9f 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -65,7 +65,7 @@
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
"mmcrootfstype=ext4 rootwait\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
"nandrootfstype=ubifs rootwait\0" \
@@ -104,7 +104,8 @@
"ramargs=setenv bootargs "\
"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
"mmcargs=setenv bootargs "\
- "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
+ "root=PARTUUID=${uuid} " \
+ "rootfstype=${mmcrootfstype} rw\0" \
"nandargs=setenv bootargs "\
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
@@ -118,6 +119,7 @@
"loadfdt=mmc rescan; " \
"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
+ "run finduuid; "\
"run mmcargs; " \
"run common_bootargs; " \
"run dump_bootargs; " \
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 0f6d6b7..04d316f 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -46,7 +46,7 @@
#define CONFIG_DFU_ENV_SETTINGS \
"dfu_alt_info=" \
"spl raw 0x2 0x400;" \
- "u-boot raw 0x8a 0x400;" \
+ "u-boot raw 0x8a 0x1000;" \
"/boot/zImage ext4 0 1;" \
"/boot/imx7d-pico-hobbit.dtb ext4 0 1;" \
"/boot/imx7d-pico-pi.dtb ext4 0 1;" \
diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 270f325..128f02d 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -31,7 +31,6 @@
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/* USB */
-#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 043f286..37649cf 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -24,8 +24,6 @@
#endif
#endif
-#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
@@ -39,7 +37,7 @@
#define CONFIG_SERIAL_TAG
#define CONFIG_DFU_ENV_SETTINGS \
- "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
+ "dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_DFU_ENV_SETTINGS \
diff --git a/include/dt-bindings/clock/imx8qm-clock.h b/include/dt-bindings/clock/imx8qm-clock.h
new file mode 100644
index 0000000..58de976
--- /dev/null
+++ b/include/dt-bindings/clock/imx8qm-clock.h
@@ -0,0 +1,846 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8QM_H
+#define __DT_BINDINGS_CLOCK_IMX8QM_H
+
+#define IMX8QM_CLK_DUMMY 0
+
+#define IMX8QM_A53_DIV 1
+#define IMX8QM_A53_CLK 2
+#define IMX8QM_A72_DIV 3
+#define IMX8QM_A72_CLK 4
+
+/* SC Clocks. */
+#define IMX8QM_SC_I2C_DIV 5
+#define IMX8QM_SC_I2C_CLK 6
+#define IMX8QM_SC_PID0_DIV 7
+#define IMX8QM_SC_PID0_CLK 8
+#define IMX8QM_SC_PIT_DIV 9
+#define IMX8QM_SC_PIT_CLK 10
+#define IMX8QM_SC_TPM_DIV 11
+#define IMX8QM_SC_TPM_CLK 12
+#define IMX8QM_SC_UART_DIV 13
+#define IMX8QM_SC_UART_CLK 14
+
+/* LSIO */
+#define IMX8QM_PWM0_DIV 15
+#define IMX8QM_PWM0_CLK 16
+#define IMX8QM_PWM1_DIV 17
+#define IMX8QM_PWM1_CLK 18
+#define IMX8QM_PWM2_DIV 19
+#define IMX8QM_PWM2_CLK 20
+#define IMX8QM_PWM3_DIV 21
+#define IMX8QM_PWM3_CLK 22
+#define IMX8QM_PWM4_DIV 23
+#define IMX8QM_PWM4_CLK 24
+#define IMX8QM_PWM5_DIV 26
+#define IMX8QM_PWM5_CLK 27
+#define IMX8QM_PWM6_DIV 28
+#define IMX8QM_PWM6_CLK 29
+#define IMX8QM_PWM7_DIV 30
+#define IMX8QM_PWM7_CLK 31
+#define IMX8QM_FSPI0_DIV 32
+#define IMX8QM_FSPI0_CLK 33
+#define IMX8QM_FSPI1_DIV 34
+#define IMX8QM_FSPI1_CLK 35
+#define IMX8QM_GPT0_DIV 36
+#define IMX8QM_GPT0_CLK 37
+#define IMX8QM_GPT1_DIV 38
+#define IMX8QM_GPT1_CLK 39
+#define IMX8QM_GPT2_DIV 40
+#define IMX8QM_GPT2_CLK 41
+#define IMX8QM_GPT3_DIV 42
+#define IMX8QM_GPT3_CLK 43
+#define IMX8QM_GPT4_DIV 44
+#define IMX8QM_GPT4_CLK 45
+
+/* Connectivity */
+#define IMX8QM_APBHDMA_CLK 46
+#define IMX8QM_GPMI_APB_CLK 47
+#define IMX8QM_GPMI_APB_BCH_CLK 48
+#define IMX8QM_GPMI_BCH_IO_DIV 49
+#define IMX8QM_GPMI_BCH_IO_CLK 50
+#define IMX8QM_GPMI_BCH_DIV 51
+#define IMX8QM_GPMI_BCH_CLK 52
+#define IMX8QM_SDHC0_IPG_CLK 53
+#define IMX8QM_SDHC0_DIV 54
+#define IMX8QM_SDHC0_CLK 55
+#define IMX8QM_SDHC1_IPG_CLK 56
+#define IMX8QM_SDHC1_DIV 57
+#define IMX8QM_SDHC1_CLK 58
+#define IMX8QM_SDHC2_IPG_CLK 59
+#define IMX8QM_SDHC2_DIV 60
+#define IMX8QM_SDHC2_CLK 61
+#define IMX8QM_USB2_OH_AHB_CLK 62
+#define IMX8QM_USB2_OH_IPG_S_CLK 63
+#define IMX8QM_USB2_OH_IPG_S_PL301_CLK 64
+#define IMX8QM_USB2_PHY_IPG_CLK 65
+#define IMX8QM_USB3_IPG_CLK 66
+#define IMX8QM_USB3_CORE_PCLK 67
+#define IMX8QM_USB3_PHY_CLK 68
+#define IMX8QM_USB3_ACLK_DIV 69
+#define IMX8QM_USB3_ACLK 70
+#define IMX8QM_USB3_BUS_DIV 71
+#define IMX8QM_USB3_BUS_CLK 72
+#define IMX8QM_USB3_LPM_DIV 73
+#define IMX8QM_USB3_LPM_CLK 74
+#define IMX8QM_ENET0_AHB_CLK 75
+#define IMX8QM_ENET0_IPG_S_CLK 76
+#define IMX8QM_ENET0_IPG_CLK 77
+#define IMX8QM_ENET0_RGMII_DIV 78
+#define IMX8QM_ENET0_RGMII_TX_CLK 79
+#define IMX8QM_ENET0_ROOT_DIV 80
+#define IMX8QM_ENET0_TX_CLK 81
+#define IMX8QM_ENET0_ROOT_CLK 82
+#define IMX8QM_ENET0_PTP_CLK 83
+#define IMX8QM_ENET0_BYPASS_DIV 84
+#define IMX8QM_ENET1_AHB_CLK 85
+#define IMX8QM_ENET1_IPG_S_CLK 86
+#define IMX8QM_ENET1_IPG_CLK 87
+#define IMX8QM_ENET1_RGMII_DIV 88
+#define IMX8QM_ENET1_RGMII_TX_CLK 89
+#define IMX8QM_ENET1_ROOT_DIV 90
+#define IMX8QM_ENET1_TX_CLK 91
+#define IMX8QM_ENET1_ROOT_CLK 92
+#define IMX8QM_ENET1_PTP_CLK 93
+#define IMX8QM_ENET1_BYPASS_DIV 94
+#define IMX8QM_MLB_CLK 95
+#define IMX8QM_MLB_HCLK 96
+#define IMX8QM_MLB_IPG_CLK 97
+#define IMX8QM_EDMA_CLK 98
+#define IMX8QM_EDMA_IPG_CLK 99
+
+/* DMA */
+#define IMX8QM_SPI0_IPG_CLK 100
+#define IMX8QM_SPI0_DIV 101
+#define IMX8QM_SPI0_CLK 102
+#define IMX8QM_SPI1_IPG_CLK 103
+#define IMX8QM_SPI1_DIV 104
+#define IMX8QM_SPI1_CLK 105
+#define IMX8QM_SPI2_IPG_CLK 106
+#define IMX8QM_SPI2_DIV 107
+#define IMX8QM_SPI2_CLK 108
+#define IMX8QM_SPI3_IPG_CLK 109
+#define IMX8QM_SPI3_DIV 110
+#define IMX8QM_SPI3_CLK 111
+#define IMX8QM_UART0_IPG_CLK 112
+#define IMX8QM_UART0_DIV 113
+#define IMX8QM_UART0_CLK 114
+#define IMX8QM_UART1_IPG_CLK 115
+#define IMX8QM_UART1_DIV 116
+#define IMX8QM_UART1_CLK 117
+#define IMX8QM_UART2_IPG_CLK 118
+#define IMX8QM_UART2_DIV 119
+#define IMX8QM_UART2_CLK 120
+#define IMX8QM_UART3_IPG_CLK 121
+#define IMX8QM_UART3_DIV 122
+#define IMX8QM_UART3_CLK 123
+#define IMX8QM_UART4_IPG_CLK 124
+#define IMX8QM_UART4_DIV 125
+#define IMX8QM_EMVSIM0_IPG_CLK 126
+#define IMX8QM_UART4_CLK 127
+#define IMX8QM_EMVSIM0_DIV 128
+#define IMX8QM_EMVSIM0_CLK 129
+#define IMX8QM_EMVSIM1_IPG_CLK 130
+#define IMX8QM_EMVSIM1_DIV 131
+#define IMX8QM_EMVSIM1_CLK 132
+#define IMX8QM_CAN0_IPG_CHI_CLK 133
+#define IMX8QM_CAN0_IPG_CLK 134
+#define IMX8QM_CAN0_DIV 135
+#define IMX8QM_CAN0_CLK 136
+#define IMX8QM_CAN1_IPG_CHI_CLK 137
+#define IMX8QM_CAN1_IPG_CLK 138
+#define IMX8QM_CAN1_DIV 139
+#define IMX8QM_CAN1_CLK 140
+#define IMX8QM_CAN2_IPG_CHI_CLK 141
+#define IMX8QM_CAN2_IPG_CLK 142
+#define IMX8QM_CAN2_DIV 143
+#define IMX8QM_CAN2_CLK 144
+#define IMX8QM_I2C0_IPG_CLK 145
+#define IMX8QM_I2C0_DIV 146
+#define IMX8QM_I2C0_CLK 147
+#define IMX8QM_I2C1_IPG_CLK 148
+#define IMX8QM_I2C1_DIV 149
+#define IMX8QM_I2C1_CLK 150
+#define IMX8QM_I2C2_IPG_CLK 151
+#define IMX8QM_I2C2_DIV 152
+#define IMX8QM_I2C2_CLK 153
+#define IMX8QM_I2C3_IPG_CLK 154
+#define IMX8QM_I2C3_DIV 155
+#define IMX8QM_I2C3_CLK 156
+#define IMX8QM_I2C4_IPG_CLK 157
+#define IMX8QM_I2C4_DIV 158
+#define IMX8QM_I2C4_CLK 159
+#define IMX8QM_FTM0_IPG_CLK 160
+#define IMX8QM_FTM0_DIV 161
+#define IMX8QM_FTM0_CLK 162
+#define IMX8QM_FTM1_IPG_CLK 163
+#define IMX8QM_FTM1_DIV 164
+#define IMX8QM_FTM1_CLK 165
+#define IMX8QM_ADC0_IPG_CLK 166
+#define IMX8QM_ADC0_DIV 167
+#define IMX8QM_ADC0_CLK 168
+#define IMX8QM_ADC1_IPG_CLK 169
+#define IMX8QM_ADC1_DIV 170
+#define IMX8QM_ADC1_CLK 171
+
+/* Audio */
+#define IMX8QM_AUD_PLL0_DIV 172
+#define IMX8QM_AUD_PLL0 173
+#define IMX8QM_AUD_PLL1_DIV 174
+#define IMX8QM_AUD_PLL1 175
+#define IMX8QM_AUD_AMIX_IPG 182
+#define IMX8QM_AUD_ESAI_0_IPG 183
+#define IMX8QM_AUD_ESAI_1_IPG 184
+#define IMX8QM_AUD_ESAI_0_EXTAL_IPG 185
+#define IMX8QM_AUD_ESAI_1_EXTAL_IPG 186
+#define IMX8QM_AUD_SAI_0_IPG 187
+#define IMX8QM_AUD_SAI_0_IPG_S 188
+#define IMX8QM_AUD_SAI_0_MCLK 189
+#define IMX8QM_AUD_SAI_1_IPG 190
+#define IMX8QM_AUD_SAI_1_IPG_S 191
+#define IMX8QM_AUD_SAI_1_MCLK 192
+#define IMX8QM_AUD_SAI_2_IPG 193
+#define IMX8QM_AUD_SAI_2_IPG_S 194
+#define IMX8QM_AUD_SAI_2_MCLK 195
+#define IMX8QM_AUD_SAI_3_IPG 196
+#define IMX8QM_AUD_SAI_3_IPG_S 197
+#define IMX8QM_AUD_SAI_3_MCLK 198
+#define IMX8QM_AUD_SAI_6_IPG 199
+#define IMX8QM_AUD_SAI_6_IPG_S 200
+#define IMX8QM_AUD_SAI_6_MCLK 201
+#define IMX8QM_AUD_SAI_7_IPG 202
+#define IMX8QM_AUD_SAI_7_IPG_S 203
+#define IMX8QM_AUD_SAI_7_MCLK 204
+#define IMX8QM_AUD_SAI_HDMIRX0_IPG 205
+#define IMX8QM_AUD_SAI_HDMIRX0_IPG_S 206
+#define IMX8QM_AUD_SAI_HDMIRX0_MCLK 207
+#define IMX8QM_AUD_SAI_HDMITX0_IPG 208
+#define IMX8QM_AUD_SAI_HDMITX0_IPG_S 209
+#define IMX8QM_AUD_SAI_HDMITX0_MCLK 210
+#define IMX8QM_AUD_MQS_IPG 211
+#define IMX8QM_AUD_MQS_HMCLK 212
+#define IMX8QM_AUD_GPT5_IPG_S 213
+#define IMX8QM_AUD_GPT5_CLKIN 214
+#define IMX8QM_AUD_GPT5_24M_CLK 215
+#define IMX8QM_AUD_GPT6_IPG_S 216
+#define IMX8QM_AUD_GPT6_CLKIN 217
+#define IMX8QM_AUD_GPT6_24M_CLK 218
+#define IMX8QM_AUD_GPT7_IPG_S 219
+#define IMX8QM_AUD_GPT7_CLKIN 220
+#define IMX8QM_AUD_GPT7_24M_CLK 221
+#define IMX8QM_AUD_GPT8_IPG_S 222
+#define IMX8QM_AUD_GPT8_CLKIN 223
+#define IMX8QM_AUD_GPT8_24M_CLK 224
+#define IMX8QM_AUD_GPT9_IPG_S 225
+#define IMX8QM_AUD_GPT9_CLKIN 226
+#define IMX8QM_AUD_GPT9_24M_CLK 227
+#define IMX8QM_AUD_GPT10_IPG_S 228
+#define IMX8QM_AUD_GPT10_CLKIN 229
+#define IMX8QM_AUD_GPT10_24M_CLK 230
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV 232
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK0_CLK 233
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK1_DIV 234
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK1_CLK 235
+#define IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV 236
+#define IMX8QM_AUD_ACM_AUD_REC_CLK0_CLK 237
+#define IMX8QM_AUD_ACM_AUD_REC_CLK1_DIV 238
+#define IMX8QM_AUD_ACM_AUD_REC_CLK1_CLK 239
+#define IMX8QM_AUD_MCLKOUT0 240
+#define IMX8QM_AUD_MCLKOUT1 241
+#define IMX8QM_AUD_SPDIF_0_TX_CLK 242
+#define IMX8QM_AUD_SPDIF_0_GCLKW 243
+#define IMX8QM_AUD_SPDIF_0_IPG_S 244
+#define IMX8QM_AUD_SPDIF_1_TX_CLK 245
+#define IMX8QM_AUD_SPDIF_1_GCLKW 246
+#define IMX8QM_AUD_SPDIF_1_IPG_S 247
+#define IMX8QM_AUD_ASRC_0_IPG 248
+#define IMX8QM_AUD_ASRC_0_MEM 249
+#define IMX8QM_AUD_ASRC_1_IPG 250
+#define IMX8QM_AUD_ASRC_1_MEM 251
+
+/* VPU */
+#define IMX8QM_VPU_CORE_DIV 252
+#define IMX8QM_VPU_CORE_CLK 253
+#define IMX8QM_VPU_UART_DIV 254
+#define IMX8QM_VPU_UART_CLK 255
+#define IMX8QM_VPU_DDR_DIV 256
+#define IMX8QM_VPU_DDR_CLK 257
+#define IMX8QM_VPU_SYS_DIV 258
+#define IMX8QM_VPU_SYS_CLK 259
+#define IMX8QM_VPU_XUVI_DIV 260
+#define IMX8QM_VPU_XUVI_CLK 261
+
+/* GPU Clocks. */
+#define IMX8QM_GPU0_CORE_DIV 262
+#define IMX8QM_GPU0_CORE_CLK 263
+#define IMX8QM_GPU0_SHADER_DIV 264
+#define IMX8QM_GPU0_SHADER_CLK 265
+#define IMX8QM_GPU1_CORE_DIV 266
+#define IMX8QM_GPU1_CORE_CLK 267
+#define IMX8QM_GPU1_SHADER_DIV 268
+#define IMX8QM_GPU1_SHADER_CLK 269
+
+/* MIPI CSI */
+#define IMX8QM_CSI0_IPG_CLK_S 270
+#define IMX8QM_CSI0_LIS_IPG_CLK 271
+#define IMX8QM_CSI0_APB_CLK 272
+#define IMX8QM_CSI0_I2C0_DIV 273
+#define IMX8QM_CSI0_I2C0_CLK 274
+#define IMX8QM_CSI0_PWM0_DIV 275
+#define IMX8QM_CSI0_PWM0_CLK 276
+#define IMX8QM_CSI0_CORE_DIV 277
+#define IMX8QM_CSI0_CORE_CLK 278
+#define IMX8QM_CSI0_ESC_DIV 279
+#define IMX8QM_CSI0_ESC_CLK 280
+#define IMX8QM_CSI1_IPG_CLK_S 281
+#define IMX8QM_CSI1_LIS_IPG_CLK 282
+#define IMX8QM_CSI1_APB_CLK 283
+#define IMX8QM_CSI1_I2C0_DIV 284
+#define IMX8QM_CSI1_I2C0_CLK 285
+#define IMX8QM_CSI1_PWM0_DIV 286
+#define IMX8QM_CSI1_PWM0_CLK 287
+#define IMX8QM_CSI1_CORE_DIV 288
+#define IMX8QM_CSI1_CORE_CLK 289
+#define IMX8QM_CSI1_ESC_DIV 290
+#define IMX8QM_CSI1_ESC_CLK 291
+
+/* Display */
+#define IMX8QM_DC0_PLL0_DIV 292
+#define IMX8QM_DC0_PLL0_CLK 293
+#define IMX8QM_DC0_PLL1_DIV 294
+#define IMX8QM_DC0_PLL1_CLK 295
+#define IMX8QM_DC0_DISP0_DIV 296
+#define IMX8QM_DC0_DISP0_CLK 297
+#define IMX8QM_DC0_DISP1_DIV 298
+#define IMX8QM_DC0_DISP1_CLK 299
+#define IMX8QM_DC0_BYPASS_0_DIV 300
+#define IMX8QM_DC0_BYPASS_1_DIV 301
+#define IMX8QM_DC0_IRIS_AXI_CLK 302
+#define IMX8AM_DC0_IRIS_MVPL_CLK 303
+#define IMX8QM_DC0_DISP0_MSI_CLK 304
+#define IMX8QM_DC0_LIS_IPG_CLK 305
+#define IMX8QM_DC0_PXL_CMB_APB_CLK 306
+#define IMX8QM_DC0_PRG0_RTRAM_CLK 307
+#define IMX8QM_DC0_PRG1_RTRAM_CLK 308
+#define IMX8QM_DC0_PRG2_RTRAM_CLK 309
+#define IMX8QM_DC0_PRG3_RTRAM_CLK 310
+#define IMX8QM_DC0_PRG4_RTRAM_CLK 311
+#define IMX8QM_DC0_PRG5_RTRAM_CLK 312
+#define IMX8QM_DC0_PRG6_RTRAM_CLK 313
+#define IMX8QM_DC0_PRG7_RTRAM_CLK 314
+#define IMX8QM_DC0_PRG8_RTRAM_CLK 315
+#define IMX8QM_DC0_PRG0_APB_CLK 316
+#define IMX8QM_DC0_PRG1_APB_CLK 317
+#define IMX8QM_DC0_PRG2_APB_CLK 318
+#define IMX8QM_DC0_PRG3_APB_CLK 319
+#define IMX8QM_DC0_PRG4_APB_CLK 320
+#define IMX8QM_DC0_PRG5_APB_CLK 321
+#define IMX8QM_DC0_PRG6_APB_CLK 322
+#define IMX8QM_DC0_PRG7_APB_CLK 323
+#define IMX8QM_DC0_PRG8_APB_CLK 324
+#define IMX8QM_DC0_DPR0_APB_CLK 325
+#define IMX8QM_DC0_DPR1_APB_CLK 326
+#define IMX8QM_DC0_RTRAM0_CLK 327
+#define IMX8QM_DC0_RTRAM1_CLK 328
+#define IMX8QM_DC1_PLL0_DIV 329
+#define IMX8QM_DC1_PLL0_CLK 330
+#define IMX8QM_DC1_PLL1_DIV 331
+#define IMX8QM_DC1_PLL1_CLK 332
+#define IMX8QM_DC1_DISP0_DIV 333
+#define IMX8QM_DC1_DISP0_CLK 334
+#define IMX8QM_DC1_BYPASS_0_DIV 335
+#define IMX8QM_DC1_BYPASS_1_DIV 336
+#define IMX8QM_DC1_DISP1_DIV 337
+#define IMX8QM_DC1_DISP1_CLK 338
+#define IMX8QM_DC1_IRIS_AXI_CLK 339
+#define IMX8AM_DC1_IRIS_MVPL_CLK 340
+#define IMX8QM_DC1_DISP0_MSI_CLK 341
+#define IMX8QM_DC1_LIS_IPG_CLK 342
+#define IMX8QM_DC1_PXL_CMB_APB_CLK 343
+#define IMX8QM_DC1_PRG0_RTRAM_CLK 344
+#define IMX8QM_DC1_PRG1_RTRAM_CLK 345
+#define IMX8QM_DC1_PRG2_RTRAM_CLK 346
+#define IMX8QM_DC1_PRG3_RTRAM_CLK 347
+#define IMX8QM_DC1_PRG4_RTRAM_CLK 348
+#define IMX8QM_DC1_PRG5_RTRAM_CLK 349
+#define IMX8QM_DC1_PRG6_RTRAM_CLK 350
+#define IMX8QM_DC1_PRG7_RTRAM_CLK 351
+#define IMX8QM_DC1_PRG8_RTRAM_CLK 352
+#define IMX8QM_DC1_PRG0_APB_CLK 353
+#define IMX8QM_DC1_PRG1_APB_CLK 354
+#define IMX8QM_DC1_PRG2_APB_CLK 355
+#define IMX8QM_DC1_PRG3_APB_CLK 356
+#define IMX8QM_DC1_PRG4_APB_CLK 357
+#define IMX8QM_DC1_PRG5_APB_CLK 358
+#define IMX8QM_DC1_PRG6_APB_CLK 359
+#define IMX8QM_DC1_PRG7_APB_CLK 360
+#define IMX8QM_DC1_PRG8_APB_CLK 361
+#define IMX8QM_DC1_DPR0_APB_CLK 362
+#define IMX8QM_DC1_DPR1_APB_CLK 363
+#define IMX8QM_DC1_RTRAM0_CLK 364
+#define IMX8QM_DC1_RTRAM1_CLK 365
+
+/* DRC */
+#define IMX8QM_DRC0_PLL0_DIV 366
+#define IMX8QM_DRC0_PLL0_CLK 367
+#define IMX8QM_DRC0_DIV 368
+#define IMX8QM_DRC0_CLK 369
+#define IMX8QM_DRC1_PLL0_DIV 370
+#define IMX8QM_DRC1_PLL0_CLK 371
+#define IMX8QM_DRC1_DIV 372
+#define IMX8QM_DRC1_CLK 373
+
+/* HDMI */
+#define IMX8QM_HDMI_AV_PLL_DIV 374
+#define IMX8QM_HDMI_AV_PLL_CLK 375
+#define IMX8QM_HDMI_I2S_BYPASS_CLK 376
+#define IMX8QM_HDMI_I2C0_DIV 377
+#define IMX8QM_HDMI_I2C0_CLK 378
+#define IMX8QM_HDMI_PXL_DIV 379
+#define IMX8QM_HDMI_PXL_CLK 380
+#define IMX8QM_HDMI_PXL_LINK_DIV 381
+#define IMX8QM_HDMI_PXL_LINK_CLK 382
+#define IMX8QM_HDMI_PXL_MUX_DIV 383
+#define IMX8QM_HDMI_PXL_MUX_CLK 384
+#define IMX8QM_HDMI_I2S_DIV 385
+#define IMX8QM_HDMI_I2S_CLK 386
+#define IMX8QM_HDMI_HDP_CORE_DIV 387
+#define IMX8QM_HDMI_HDP_CORE_CLK 388
+#define IMX8QM_HDMI_I2C_IPG_S_CLK 389
+#define IMX8QM_HDMI_I2C_IPG_CLK 390
+#define IMX8QM_HDMI_PWM_IPG_S_CLK 391
+#define IMX8QM_HDMI_PWM_IPG_CLK 392
+#define IMX8QM_HDMI_PWM_32K_CLK 393
+#define IMX8QM_HDMI_GPIO_IPG_CLK 394
+#define IMX8QM_HDMI_PXL_LINK_SLV_ODD_CLK 395
+#define IMX8QM_HDMI_PXL_LINK_SLV_EVEN_CLK 396
+#define IMX8QM_HDMI_LIS_IPG_CLK 397
+#define IMX8QM_HDMI_MSI_HCLK 398
+#define IMX8QM_HDMI_PXL_EVEN_CLK 399
+#define IMX8QM_HDMI_HDP_CLK 400
+#define IMX8QM_HDMI_PXL_DBL_CLK 401
+#define IMX8QM_HDMI_APB_CLK 402
+#define IMX8QM_HDMI_PXL_LPCG_CLK 403
+#define IMX8QM_HDMI_HDP_PHY_CLK 404
+#define IMX8QM_HDMI_IPG_DIV 405
+#define IMX8QM_HDMI_VIF_CLK 406
+#define IMX8QM_HDMI_DIG_PLL_DIV 407
+#define IMX8QM_HDMI_DIG_PLL_CLK 408
+#define IMX8QM_HDMI_APB_MUX_CSR_CLK 409
+#define IMX8QM_HDMI_APB_MUX_CTRL_CLK 410
+
+/* RX-HDMI */
+#define IMX8QM_HDMI_RX_I2S_BYPASS_CLK 411
+#define IMX8QM_HDMI_RX_BYPASS_CLK 412
+#define IMX8QM_HDMI_RX_SPDIF_BYPASS_CLK 413
+#define IMX8QM_HDMI_RX_I2C0_DIV 414
+#define IMX8QM_HDMI_RX_I2C0_CLK 415
+#define IMX8QM_HDMI_RX_SPDIF_DIV 416
+#define IMX8QM_HDMI_RX_SPDIF_CLK 417
+#define IMX8QM_HDMI_RX_HD_REF_DIV 418
+#define IMX8QM_HDMI_RX_HD_REF_CLK 419
+#define IMX8QM_HDMI_RX_HD_CORE_DIV 420
+#define IMX8QM_HDMI_RX_HD_CORE_CLK 421
+#define IMX8QM_HDMI_RX_PXL_DIV 422
+#define IMX8QM_HDMI_RX_PXL_CLK 423
+#define IMX8QM_HDMI_RX_I2S_DIV 424
+#define IMX8QM_HDMI_RX_I2S_CLK 425
+#define IMX8QM_HDMI_RX_PWM_DIV 426
+#define IMX8QM_HDMI_RX_PWM_CLK 427
+
+/* LVDS */
+#define IMX8QM_LVDS0_BYPASS_CLK 428
+#define IMX8QM_LVDS0_PIXEL_DIV 429
+#define IMX8QM_LVDS0_PIXEL_CLK 430
+#define IMX8QM_LVDS0_PHY_DIV 431
+#define IMX8QM_LVDS0_PHY_CLK 432
+#define IMX8QM_LVDS0_I2C0_IPG_CLK 433
+#define IMX8QM_LVDS0_I2C0_DIV 434
+#define IMX8QM_LVDS0_I2C0_CLK 435
+#define IMX8QM_LVDS0_I2C1_IPG_CLK 436
+#define IMX8QM_LVDS0_I2C1_DIV 437
+#define IMX8QM_LVDS0_I2C1_CLK 438
+#define IMX8QM_LVDS0_PWM0_IPG_CLK 439
+#define IMX8QM_LVDS0_PWM0_DIV 440
+#define IMX8QM_LVDS0_PWM0_CLK 441
+#define IMX8QM_LVDS0_GPIO_IPG_CLK 444
+#define IMX8QM_LVDS1_BYPASS_DIV 445
+#define IMX8QM_LVDS1_BYPASS_CLK 446
+#define IMX8QM_LVDS1_PIXEL_DIV 447
+#define IMX8QM_LVDS1_PIXEL_CLK 448
+#define IMX8QM_LVDS1_PHY_DIV 449
+#define IMX8QM_LVDS1_PHY_CLK 450
+#define IMX8QM_LVDS1_I2C0_IPG_CLK 451
+#define IMX8QM_LVDS1_I2C0_DIV 452
+#define IMX8QM_LVDS1_I2C0_CLK 453
+#define IMX8QM_LVDS1_I2C1_IPG_CLK 454
+#define IMX8QM_LVDS1_I2C1_DIV 455
+#define IMX8QM_LVDS1_I2C1_CLK 456
+#define IMX8QM_LVDS1_PWM0_IPG_CLK 457
+#define IMX8QM_LVDS1_PWM0_DIV 458
+#define IMX8QM_LVDS1_PWM0_CLK 459
+#define IMX8QM_LVDS1_GPIO_IPG_CLK 462
+
+/* MIPI */
+#define IMX8QM_MIPI0_BYPASS_CLK 465
+#define IMX8QM_MIPI0_I2C0_DIV 466
+#define IMX8QM_MIPI0_I2C0_CLK 467
+#define IMX8QM_MIPI0_I2C1_DIV 468
+#define IMX8QM_MIPI0_I2C1_CLK 469
+#define IMX8QM_MIPI0_PWM0_DIV 470
+#define IMX8QM_MIPI0_PWM0_CLK 471
+#define IMX8QM_MIPI0_DSI_TX_ESC_DIV 472
+#define IMX8QM_MIPI0_DSI_TX_ESC_CLK 473
+#define IMX8QM_MIPI0_DSI_RX_ESC_DIV 474
+#define IMX8QM_MIPI0_DSI_RX_ESC_CLK 475
+#define IMX8QM_MIPI0_PXL_DIV 476
+#define IMX8QM_MIPI0_PXL_CLK 477
+#define IMX8QM_MIPI1_BYPASS_CLK 479
+#define IMX8QM_MIPI1_I2C0_DIV 480
+#define IMX8QM_MIPI1_I2C0_CLK 481
+#define IMX8QM_MIPI1_I2C1_DIV 482
+#define IMX8QM_MIPI1_I2C1_CLK 483
+#define IMX8QM_MIPI1_PWM0_DIV 484
+#define IMX8QM_MIPI1_PWM0_CLK 485
+#define IMX8QM_MIPI1_DSI_TX_ESC_DIV 486
+#define IMX8QM_MIPI1_DSI_TX_ESC_CLK 487
+#define IMX8QM_MIPI1_DSI_RX_ESC_DIV 488
+#define IMX8QM_MIPI1_DSI_RX_ESC_CLK 489
+#define IMX8QM_MIPI1_PXL_DIV 490
+#define IMX8QM_MIPI1_PXL_CLK 491
+
+/* Imaging */
+#define IMX8QM_IMG_JPEG_ENC_IPG_CLK 492
+#define IMX8QM_IMG_JPEG_ENC_CLK 493
+#define IMX8QM_IMG_JPEG_DEC_IPG_CLK 494
+#define IMX8QM_IMG_JPEG_DEC_CLK 495
+#define IMX8QM_IMG_PXL_LINK_DC0_CLK 496
+#define IMX8QM_IMG_PXL_LINK_DC1_CLK 497
+#define IMX8QM_IMG_PXL_LINK_CSI0_CLK 498
+#define IMX8QM_IMG_PXL_LINK_CSI1_CLK 499
+#define IMX8QM_IMG_PXL_LINK_HDMI_IN_CLK 500
+#define IMX8QM_IMG_PDMA_0_CLK 501
+#define IMX8QM_IMG_PDMA_1_CLK 502
+#define IMX8QM_IMG_PDMA_2_CLK 503
+#define IMX8QM_IMG_PDMA_3_CLK 504
+#define IMX8QM_IMG_PDMA_4_CLK 505
+#define IMX8QM_IMG_PDMA_5_CLK 506
+#define IMX8QM_IMG_PDMA_6_CLK 507
+#define IMX8QM_IMG_PDMA_7_CLK 508
+
+/* HSIO */
+#define IMX8QM_HSIO_PCIE_A_MSTR_AXI_CLK 509
+#define IMX8QM_HSIO_PCIE_A_SLV_AXI_CLK 510
+#define IMX8QM_HSIO_PCIE_A_DBI_AXI_CLK 511
+#define IMX8QM_HSIO_PCIE_B_MSTR_AXI_CLK 512
+#define IMX8QM_HSIO_PCIE_B_SLV_AXI_CLK 513
+#define IMX8QM_HSIO_PCIE_B_DBI_AXI_CLK 514
+#define IMX8QM_HSIO_PCIE_X1_PER_CLK 515
+#define IMX8QM_HSIO_PCIE_X2_PER_CLK 516
+#define IMX8QM_HSIO_SATA_PER_CLK 517
+#define IMX8QM_HSIO_PHY_X1_PER_CLK 518
+#define IMX8QM_HSIO_PHY_X2_PER_CLK 519
+#define IMX8QM_HSIO_MISC_PER_CLK 520
+#define IMX8QM_HSIO_PHY_X1_APB_CLK 521
+#define IMX8QM_HSIO_PHY_X2_APB_0_CLK 522
+#define IMX8QM_HSIO_PHY_X2_APB_1_CLK 523
+#define IMX8QM_HSIO_SATA_CLK 524
+#define IMX8QM_HSIO_GPIO_CLK 525
+#define IMX8QM_HSIO_PHY_X1_PCLK 526
+#define IMX8QM_HSIO_PHY_X2_PCLK_0 527
+#define IMX8QM_HSIO_PHY_X2_PCLK_1 528
+#define IMX8QM_HSIO_SATA_EPCS_RX_CLK 529
+#define IMX8QM_HSIO_SATA_EPCS_TX_CLK 530
+
+/* M4 */
+#define IMX8QM_M4_0_CORE_DIV 531
+#define IMX8QM_M4_0_CORE_CLK 532
+#define IMX8QM_M4_0_I2C_DIV 533
+#define IMX8QM_M4_0_I2C_CLK 534
+#define IMX8QM_M4_0_PIT_DIV 535
+#define IMX8QM_M4_0_PIT_CLK 536
+#define IMX8QM_M4_0_TPM_DIV 537
+#define IMX8QM_M4_0_TPM_CLK 538
+#define IMX8QM_M4_0_UART_DIV 539
+#define IMX8QM_M4_0_UART_CLK 540
+#define IMX8QM_M4_0_WDOG_DIV 541
+#define IMX8QM_M4_0_WDOG_CLK 542
+#define IMX8QM_M4_1_CORE_DIV 543
+#define IMX8QM_M4_1_CORE_CLK 544
+#define IMX8QM_M4_1_I2C_DIV 545
+#define IMX8QM_M4_1_I2C_CLK 546
+#define IMX8QM_M4_1_PIT_DIV 547
+#define IMX8QM_M4_1_PIT_CLK 548
+#define IMX8QM_M4_1_TPM_DIV 549
+#define IMX8QM_M4_1_TPM_CLK 550
+#define IMX8QM_M4_1_UART_DIV 551
+#define IMX8QM_M4_1_UART_CLK 552
+#define IMX8QM_M4_1_WDOG_DIV 553
+#define IMX8QM_M4_1_WDOG_CLK 554
+
+/* IPG clocks */
+#define IMX8QM_24MHZ 555
+#define IMX8QM_GPT_3M 556
+#define IMX8QM_IPG_DMA_CLK_ROOT 557
+#define IMX8QM_IPG_AUD_CLK_ROOT 558
+#define IMX8QM_IPG_CONN_CLK_ROOT 559
+#define IMX8QM_AHB_CONN_CLK_ROOT 560
+#define IMX8QM_AXI_CONN_CLK_ROOT 561
+#define IMX8QM_IPG_MIPI_CSI_CLK_ROOT 562
+#define IMX8QM_DC_AXI_EXT_CLK 563
+#define IMX8QM_DC_AXI_INT_CLK 564
+#define IMX8QM_DC_CFG_CLK 565
+#define IMX8QM_HDMI_IPG_CLK 566
+#define IMX8QM_LVDS_IPG_CLK 567
+#define IMX8QM_IMG_AXI_CLK 568
+#define IMX8QM_IMG_IPG_CLK 569
+#define IMX8QM_IMG_PXL_CLK 570
+#define IMX8QM_CSI0_I2C0_IPG_CLK 571
+#define IMX8QM_CSI0_PWM0_IPG_CLK 572
+#define IMX8QM_CSI1_I2C0_IPG_CLK 573
+#define IMX8QM_CSI1_PWM0_IPG_CLK 574
+#define IMX8QM_DC0_DPR0_B_CLK 575
+#define IMX8QM_DC0_DPR1_B_CLK 576
+#define IMX8QM_DC1_DPR0_B_CLK 577
+#define IMX8QM_DC1_DPR1_B_CLK 578
+#define IMX8QM_32KHZ 579
+#define IMX8QM_HSIO_AXI_CLK 580
+#define IMX8QM_HSIO_PER_CLK 581
+#define IMX8QM_HDMI_RX_GPIO_IPG_S_CLK 582
+#define IMX8QM_HDMI_RX_PWM_IPG_S_CLK 583
+#define IMX8QM_HDMI_RX_PWM_IPG_CLK 584
+#define IMX8QM_HDMI_RX_I2C_DIV_CLK 585
+#define IMX8QM_HDMI_RX_I2C_IPG_S_CLK 586
+#define IMX8QM_HDMI_RX_I2C_IPG_CLK 587
+#define IMX8QM_HDMI_RX_SINK_PCLK 588
+#define IMX8QM_HDMI_RX_SINK_SCLK 589
+#define IMX8QM_HDMI_RX_PXL_ENC_CLK 590
+#define IMX8QM_HDMI_RX_IPG_CLK 591
+
+/* ACM */
+#define IMX8QM_HDMI_RX_MCLK 592
+#define IMX8QM_EXT_AUD_MCLK0 593
+#define IMX8QM_EXT_AUD_MCLK1 594
+#define IMX8QM_ESAI0_RX_CLK 595
+#define IMX8QM_ESAI0_RX_HF_CLK 596
+#define IMX8QM_ESAI0_TX_CLK 597
+#define IMX8QM_ESAI0_TX_HF_CLK 598
+#define IMX8QM_ESAI1_RX_CLK 599
+#define IMX8QM_ESAI1_RX_HF_CLK 600
+#define IMX8QM_ESAI1_TX_CLK 601
+#define IMX8QM_ESAI1_TX_HF_CLK 602
+#define IMX8QM_SPDIF0_RX 603
+#define IMX8QM_SPDIF1_RX 604
+#define IMX8QM_SAI0_RX_BCLK 605
+#define IMX8QM_SAI0_TX_BCLK 606
+#define IMX8QM_SAI1_RX_BCLK 607
+#define IMX8QM_SAI1_TX_BCLK 608
+#define IMX8QM_SAI2_RX_BCLK 609
+#define IMX8QM_SAI3_RX_BCLK 610
+#define IMX8QM_HDMI_RX_SAI0_RX_BCLK 611
+#define IMX8QM_SAI6_RX_BCLK 612
+#define IMX8QM_HDMI_TX_SAI0_TX_BCLK 613
+
+#define IMX8QM_ACM_AUD_CLK0_SEL 614
+#define IMX8QM_ACM_AUD_CLK0_CLK 615
+#define IMX8QM_ACM_AUD_CLK1_SEL 616
+#define IMX8QM_ACM_AUD_CLK1_CLK 617
+#define IMX8QM_ACM_MCLKOUT0_SEL 618
+#define IMX8QM_ACM_MCLKOUT0_CLK 619
+#define IMX8QM_ACM_MCLKOUT1_SEL 620
+#define IMX8QM_ACM_MCLKOUT1_CLK 621
+#define IMX8QM_ACM_ASRC0_MUX_CLK_SEL 622
+#define IMX8QM_ACM_ASRC0_MUX_CLK_CLK 623
+#define IMX8QM_ACM_ASRC1_MUX_CLK_SEL 624
+#define IMX8QM_ACM_ASRC1_MUX_CLK_CLK 625
+#define IMX8QM_ACM_ESAI0_MCLK_SEL 626
+#define IMX8QM_ACM_ESAI0_MCLK_CLK 627
+#define IMX8QM_ACM_ESAI1_MCLK_SEL 628
+#define IMX8QM_ACM_ESAI1_MCLK_CLK 629
+#define IMX8QM_ACM_GPT0_MUX_CLK_SEL 630
+#define IMX8QM_ACM_GPT0_MUX_CLK_CLK 631
+#define IMX8QM_ACM_GPT1_MUX_CLK_SEL 632
+#define IMX8QM_ACM_GPT1_MUX_CLK_CLK 633
+#define IMX8QM_ACM_GPT2_MUX_CLK_SEL 634
+#define IMX8QM_ACM_GPT2_MUX_CLK_CLK 635
+#define IMX8QM_ACM_GPT3_MUX_CLK_SEL 636
+#define IMX8QM_ACM_GPT3_MUX_CLK_CLK 637
+#define IMX8QM_ACM_GPT4_MUX_CLK_SEL 638
+#define IMX8QM_ACM_GPT4_MUX_CLK_CLK 639
+#define IMX8QM_ACM_GPT5_MUX_CLK_SEL 640
+#define IMX8QM_ACM_GPT5_MUX_CLK_CLK 641
+#define IMX8QM_ACM_SAI0_MCLK_SEL 642
+#define IMX8QM_ACM_SAI0_MCLK_CLK 643
+#define IMX8QM_ACM_SAI1_MCLK_SEL 644
+#define IMX8QM_ACM_SAI1_MCLK_CLK 645
+#define IMX8QM_ACM_SAI2_MCLK_SEL 646
+#define IMX8QM_ACM_SAI2_MCLK_CLK 647
+#define IMX8QM_ACM_SAI3_MCLK_SEL 648
+#define IMX8QM_ACM_SAI3_MCLK_CLK 649
+#define IMX8QM_ACM_HDMI_RX_SAI0_MCLK_SEL 650
+#define IMX8QM_ACM_HDMI_RX_SAI0_MCLK_CLK 651
+#define IMX8QM_ACM_HDMI_TX_SAI0_MCLK_SEL 652
+#define IMX8QM_ACM_HDMI_TX_SAI0_MCLK_CLK 653
+#define IMX8QM_ACM_SAI6_MCLK_SEL 654
+#define IMX8QM_ACM_SAI6_MCLK_CLK 655
+#define IMX8QM_ACM_SAI7_MCLK_SEL 656
+#define IMX8QM_ACM_SAI7_MCLK_CLK 657
+#define IMX8QM_ACM_SPDIF0_TX_CLK_SEL 658
+#define IMX8QM_ACM_SPDIF0_TX_CLK_CLK 659
+#define IMX8QM_ACM_SPDIF1_TX_CLK_SEL 660
+#define IMX8QM_ACM_SPDIF1_TX_CLK_CLK 661
+#define IMX8QM_ACM_MQS_TX_CLK_SEL 662
+#define IMX8QM_ACM_MQS_TX_CLK_CLK 663
+
+#define IMX8QM_ENET0_REF_25MHZ_125MHZ_SEL 664
+#define IMX8QM_ENET0_REF_25MHZ_125MHZ_CLK 665
+#define IMX8QM_ENET1_REF_25MHZ_125MHZ_SEL 666
+#define IMX8QM_ENET1_REF_25MHZ_125MHZ_CLK 667
+#define IMX8QM_ENET0_REF_50MHZ_CLK 668
+#define IMX8QM_ENET1_REF_50MHZ_CLK 669
+#define IMX8QM_ENET_25MHZ_CLK 670
+#define IMX8QM_ENET_125MHZ_CLK 671
+#define IMX8QM_ENET0_REF_DIV 672
+#define IMX8QM_ENET0_REF_CLK 673
+#define IMX8QM_ENET1_REF_DIV 674
+#define IMX8QM_ENET1_REF_CLK 675
+#define IMX8QM_ENET0_RMII_TX_CLK 676
+#define IMX8QM_ENET1_RMII_TX_CLK 677
+#define IMX8QM_ENET0_RMII_TX_SEL 678
+#define IMX8QM_ENET1_RMII_TX_SEL 679
+#define IMX8QM_ENET0_RMII_RX_CLK 680
+#define IMX8QM_ENET1_RMII_RX_CLK 681
+
+#define IMX8QM_KPP_CLK 683
+#define IMX8QM_GPT0_HF_CLK 684
+#define IMX8QM_GPT0_IPG_S_CLK 685
+#define IMX8QM_GPT0_IPG_SLV_CLK 686
+#define IMX8QM_GPT0_IPG_MSTR_CLK 687
+#define IMX8QM_GPT1_HF_CLK 688
+#define IMX8QM_GPT1_IPG_S_CLK 689
+#define IMX8QM_GPT1_IPG_SLV_CLK 690
+#define IMX8QM_GPT1_IPG_MSTR_CLK 691
+#define IMX8QM_GPT2_HF_CLK 692
+#define IMX8QM_GPT2_IPG_S_CLK 693
+#define IMX8QM_GPT2_IPG_SLV_CLK 694
+#define IMX8QM_GPT2_IPG_MSTR_CLK 695
+#define IMX8QM_GPT3_HF_CLK 696
+#define IMX8QM_GPT3_IPG_S_CLK 697
+#define IMX8QM_GPT3_IPG_SLV_CLK 698
+#define IMX8QM_GPT3_IPG_MSTR_CLK 699
+#define IMX8QM_GPT4_HF_CLK 700
+#define IMX8QM_GPT4_IPG_S_CLK 701
+#define IMX8QM_GPT4_IPG_SLV_CLK 702
+#define IMX8QM_GPT4_IPG_MSTR_CLK 703
+#define IMX8QM_PWM0_HF_CLK 704
+#define IMX8QM_PWM0_IPG_S_CLK 705
+#define IMX8QM_PWM0_IPG_SLV_CLK 706
+#define IMX8QM_PWM0_IPG_MSTR_CLK 707
+#define IMX8QM_PWM1_HF_CLK 708
+#define IMX8QM_PWM1_IPG_S_CLK 709
+#define IMX8QM_PWM1_IPG_SLV_CLK 710
+#define IMX8QM_PWM1_IPG_MSTR_CLK 711
+#define IMX8QM_PWM2_HF_CLK 712
+#define IMX8QM_PWM2_IPG_S_CLK 713
+#define IMX8QM_PWM2_IPG_SLV_CLK 714
+#define IMX8QM_PWM2_IPG_MSTR_CLK 715
+#define IMX8QM_PWM3_HF_CLK 716
+#define IMX8QM_PWM3_IPG_S_CLK 717
+#define IMX8QM_PWM3_IPG_SLV_CLK 718
+#define IMX8QM_PWM3_IPG_MSTR_CLK 719
+#define IMX8QM_PWM4_HF_CLK 720
+#define IMX8QM_PWM4_IPG_S_CLK 721
+#define IMX8QM_PWM4_IPG_SLV_CLK 722
+#define IMX8QM_PWM4_IPG_MSTR_CLK 723
+#define IMX8QM_PWM5_HF_CLK 724
+#define IMX8QM_PWM5_IPG_S_CLK 725
+#define IMX8QM_PWM5_IPG_SLV_CLK 726
+#define IMX8QM_PWM5_IPG_MSTR_CLK 727
+#define IMX8QM_PWM6_HF_CLK 728
+#define IMX8QM_PWM6_IPG_S_CLK 729
+#define IMX8QM_PWM6_IPG_SLV_CLK 730
+#define IMX8QM_PWM6_IPG_MSTR_CLK 731
+#define IMX8QM_PWM7_HF_CLK 732
+#define IMX8QM_PWM7_IPG_S_CLK 733
+#define IMX8QM_PWM7_IPG_SLV_CLK 734
+#define IMX8QM_PWM7_IPG_MSTR_CLK 735
+#define IMX8QM_FSPI0_HCLK 736
+#define IMX8QM_FSPI0_IPG_CLK 737
+#define IMX8QM_FSPI0_IPG_S_CLK 738
+#define IMX8QM_FSPI1_HCLK 736
+#define IMX8QM_FSPI1_IPG_CLK 737
+#define IMX8QM_FSPI1_IPG_S_CLK 738
+#define IMX8QM_GPIO0_IPG_S_CLK 739
+#define IMX8QM_GPIO1_IPG_S_CLK 740
+#define IMX8QM_GPIO2_IPG_S_CLK 741
+#define IMX8QM_GPIO3_IPG_S_CLK 742
+#define IMX8QM_GPIO4_IPG_S_CLK 743
+#define IMX8QM_GPIO5_IPG_S_CLK 744
+#define IMX8QM_GPIO6_IPG_S_CLK 745
+#define IMX8QM_GPIO7_IPG_S_CLK 746
+#define IMX8QM_ROMCP_CLK 747
+#define IMX8QM_ROMCP_REG_CLK 748
+#define IMX8QM_96KROM_CLK 749
+#define IMX8QM_OCRAM_MEM_CLK 750
+#define IMX8QM_OCRAM_CTRL_CLK 751
+#define IMX8QM_LSIO_BUS_CLK 752
+#define IMX8QM_LSIO_MEM_CLK 753
+#define IMX8QM_LVDS0_LIS_IPG_CLK 754
+#define IMX8QM_LVDS1_LIS_IPG_CLK 755
+#define IMX8QM_MIPI0_LIS_IPG_CLK 756
+#define IMX8QM_MIPI0_I2C0_IPG_S_CLK 757
+#define IMX8QM_MIPI0_I2C0_IPG_CLK 758
+#define IMX8QM_MIPI0_I2C1_IPG_S_CLK 759
+#define IMX8QM_MIPI0_I2C1_IPG_CLK 760
+#define IMX8QM_MIPI0_CLK_ROOT 761
+#define IMX8QM_MIPI1_LIS_IPG_CLK 762
+#define IMX8QM_MIPI1_I2C0_IPG_S_CLK 763
+#define IMX8QM_MIPI1_I2C0_IPG_CLK 764
+#define IMX8QM_MIPI1_I2C1_IPG_S_CLK 765
+#define IMX8QM_MIPI1_I2C1_IPG_CLK 766
+#define IMX8QM_MIPI1_CLK_ROOT 767
+#define IMX8QM_DC0_DISP0_SEL 768
+#define IMX8QM_DC0_DISP1_SEL 769
+#define IMX8QM_DC1_DISP0_SEL 770
+#define IMX8QM_DC1_DISP1_SEL 771
+
+/* CM40 */
+#define IMX8QM_CM40_IPG_CLK 772
+#define IMX8QM_CM40_I2C_DIV 773
+#define IMX8QM_CM40_I2C_CLK 774
+#define IMX8QM_CM40_I2C_IPG_CLK 775
+
+/* CM41 */
+#define IMX8QM_CM41_IPG_CLK 776
+#define IMX8QM_CM41_I2C_DIV 777
+#define IMX8QM_CM41_I2C_CLK 778
+#define IMX8QM_CM41_I2C_IPG_CLK 779
+
+#define IMX8QM_HDMI_PXL_SEL 780
+#define IMX8QM_HDMI_PXL_LINK_SEL 781
+#define IMX8QM_HDMI_PXL_MUX_SEL 782
+#define IMX8QM_HDMI_AV_PLL_BYPASS_CLK 783
+
+#define IMX8QM_HDMI_RX_PXL_SEL 784
+#define IMX8QM_HDMI_RX_HD_REF_SEL 785
+#define IMX8QM_HDMI_RX_HD_CORE_SEL 786
+#define IMX8QM_HDMI_RX_DIG_PLL_CLK 787
+
+#define IMX8QM_LSIO_MU5A_IPG_S_CLK 788
+#define IMX8QM_LSIO_MU5A_IPG_CLK 789
+#define IMX8QM_LSIO_MU6A_IPG_S_CLK 790
+#define IMX8QM_LSIO_MU6A_IPG_CLK 791
+
+/* DSP */
+#define IMX8QM_AUD_DSP_ADB_ACLK 792
+#define IMX8QM_AUD_DSP_IPG 793
+#define IMX8QM_AUD_DSP_CORE_CLK 794
+#define IMX8QM_AUD_OCRAM_IPG 795
+
+#define IMX8QM_CLK_END 796
+
+#endif /* __DT_BINDINGS_CLOCK_IMX8QM_H */
diff --git a/include/dt-bindings/pinctrl/pads-imx8qm.h b/include/dt-bindings/pinctrl/pads-imx8qm.h
new file mode 100644
index 0000000..e980fd5
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pads-imx8qm.h
@@ -0,0 +1,961 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef SC_PADS_H
+#define SC_PADS_H
+
+#define SC_P_SIM0_CLK 0 /* DMA.SIM0.CLK, LSIO.GPIO0.IO00 */
+#define SC_P_SIM0_RST 1 /* DMA.SIM0.RST, LSIO.GPIO0.IO01 */
+#define SC_P_SIM0_IO 2 /* DMA.SIM0.IO, LSIO.GPIO0.IO02 */
+#define SC_P_SIM0_PD 3 /* DMA.SIM0.PD, DMA.I2C3.SCL, LSIO.GPIO0.IO03 */
+#define SC_P_SIM0_POWER_EN 4 /* DMA.SIM0.POWER_EN, DMA.I2C3.SDA, LSIO.GPIO0.IO04 */
+#define SC_P_SIM0_GPIO0_00 5 /* DMA.SIM0.POWER_EN, LSIO.GPIO0.IO05 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_SIM 6 /* */
+#define SC_P_M40_I2C0_SCL 7 /* M40.I2C0.SCL, M40.UART0.RX, M40.GPIO0.IO02, LSIO.GPIO0.IO06 */
+#define SC_P_M40_I2C0_SDA 8 /* M40.I2C0.SDA, M40.UART0.TX, M40.GPIO0.IO03, LSIO.GPIO0.IO07 */
+#define SC_P_M40_GPIO0_00 9 /* M40.GPIO0.IO00, M40.TPM0.CH0, DMA.UART4.RX, LSIO.GPIO0.IO08 */
+#define SC_P_M40_GPIO0_01 10 /* M40.GPIO0.IO01, M40.TPM0.CH1, DMA.UART4.TX, LSIO.GPIO0.IO09 */
+#define SC_P_M41_I2C0_SCL 11 /* M41.I2C0.SCL, M41.UART0.RX, M41.GPIO0.IO02, LSIO.GPIO0.IO10 */
+#define SC_P_M41_I2C0_SDA 12 /* M41.I2C0.SDA, M41.UART0.TX, M41.GPIO0.IO03, LSIO.GPIO0.IO11 */
+#define SC_P_M41_GPIO0_00 13 /* M41.GPIO0.IO00, M41.TPM0.CH0, DMA.UART3.RX, LSIO.GPIO0.IO12 */
+#define SC_P_M41_GPIO0_01 14 /* M41.GPIO0.IO01, M41.TPM0.CH1, DMA.UART3.TX, LSIO.GPIO0.IO13 */
+#define SC_P_GPT0_CLK 15 /* LSIO.GPT0.CLK, DMA.I2C1.SCL, LSIO.KPP0.COL4, LSIO.GPIO0.IO14 */
+#define SC_P_GPT0_CAPTURE 16 /* LSIO.GPT0.CAPTURE, DMA.I2C1.SDA, LSIO.KPP0.COL5, LSIO.GPIO0.IO15 */
+#define SC_P_GPT0_COMPARE 17 /* LSIO.GPT0.COMPARE, LSIO.PWM3.OUT, LSIO.KPP0.COL6, LSIO.GPIO0.IO16 */
+#define SC_P_GPT1_CLK 18 /* LSIO.GPT1.CLK, DMA.I2C2.SCL, LSIO.KPP0.COL7, LSIO.GPIO0.IO17 */
+#define SC_P_GPT1_CAPTURE 19 /* LSIO.GPT1.CAPTURE, DMA.I2C2.SDA, LSIO.KPP0.ROW4, LSIO.GPIO0.IO18 */
+#define SC_P_GPT1_COMPARE 20 /* LSIO.GPT1.COMPARE, LSIO.PWM2.OUT, LSIO.KPP0.ROW5, LSIO.GPIO0.IO19 */
+#define SC_P_UART0_RX 21 /* DMA.UART0.RX, SCU.UART0.RX, LSIO.GPIO0.IO20 */
+#define SC_P_UART0_TX 22 /* DMA.UART0.TX, SCU.UART0.TX, LSIO.GPIO0.IO21 */
+#define SC_P_UART0_RTS_B 23 /* DMA.UART0.RTS_B, LSIO.PWM0.OUT, DMA.UART2.RX, LSIO.GPIO0.IO22 */
+#define SC_P_UART0_CTS_B 24 /* DMA.UART0.CTS_B, LSIO.PWM1.OUT, DMA.UART2.TX, LSIO.GPIO0.IO23 */
+#define SC_P_UART1_TX 25 /* DMA.UART1.TX, DMA.SPI3.SCK, LSIO.GPIO0.IO24 */
+#define SC_P_UART1_RX 26 /* DMA.UART1.RX, DMA.SPI3.SDO, LSIO.GPIO0.IO25 */
+#define SC_P_UART1_RTS_B 27 /* DMA.UART1.RTS_B, DMA.SPI3.SDI, DMA.UART1.CTS_B, LSIO.GPIO0.IO26 */
+#define SC_P_UART1_CTS_B 28 /* DMA.UART1.CTS_B, DMA.SPI3.CS0, DMA.UART1.RTS_B, LSIO.GPIO0.IO27 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOLH 29 /* */
+#define SC_P_SCU_PMIC_MEMC_ON 30 /* SCU.GPIO0.IOXX_PMIC_MEMC_ON */
+#define SC_P_SCU_WDOG_OUT 31 /* SCU.WDOG0.WDOG_OUT */
+#define SC_P_PMIC_I2C_SDA 32 /* SCU.PMIC_I2C.SDA */
+#define SC_P_PMIC_I2C_SCL 33 /* SCU.PMIC_I2C.SCL */
+#define SC_P_PMIC_EARLY_WARNING 34 /* SCU.PMIC_EARLY_WARNING */
+#define SC_P_PMIC_INT_B 35 /* SCU.DSC.PMIC_INT_B */
+#define SC_P_SCU_GPIO0_00 36 /* SCU.GPIO0.IO00, SCU.UART0.RX, LSIO.GPIO0.IO28 */
+#define SC_P_SCU_GPIO0_01 37 /* SCU.GPIO0.IO01, SCU.UART0.TX, LSIO.GPIO0.IO29 */
+#define SC_P_SCU_GPIO0_02 38 /* SCU.GPIO0.IO02, SCU.GPIO0.IOXX_PMIC_GPU0_ON, LSIO.GPIO0.IO30 */
+#define SC_P_SCU_GPIO0_03 39 /* SCU.GPIO0.IO03, SCU.GPIO0.IOXX_PMIC_GPU1_ON, LSIO.GPIO0.IO31 */
+#define SC_P_SCU_GPIO0_04 40 /* SCU.GPIO0.IO04, SCU.GPIO0.IOXX_PMIC_A72_ON, LSIO.GPIO1.IO00 */
+#define SC_P_SCU_GPIO0_05 41 /* SCU.GPIO0.IO05, SCU.GPIO0.IOXX_PMIC_A53_ON, LSIO.GPIO1.IO01 */
+#define SC_P_SCU_GPIO0_06 42 /* SCU.GPIO0.IO06, SCU.TPM0.CH0, LSIO.GPIO1.IO02 */
+#define SC_P_SCU_GPIO0_07 43 /* SCU.GPIO0.IO07, SCU.TPM0.CH1, SCU.DSC.RTC_CLOCK_OUTPUT_32K, LSIO.GPIO1.IO03 */
+#define SC_P_SCU_BOOT_MODE0 44 /* SCU.DSC.BOOT_MODE0 */
+#define SC_P_SCU_BOOT_MODE1 45 /* SCU.DSC.BOOT_MODE1 */
+#define SC_P_SCU_BOOT_MODE2 46 /* SCU.DSC.BOOT_MODE2 */
+#define SC_P_SCU_BOOT_MODE3 47 /* SCU.DSC.BOOT_MODE3 */
+#define SC_P_SCU_BOOT_MODE4 48 /* SCU.DSC.BOOT_MODE4, SCU.PMIC_I2C.SCL */
+#define SC_P_SCU_BOOT_MODE5 49 /* SCU.DSC.BOOT_MODE5, SCU.PMIC_I2C.SDA */
+#define SC_P_LVDS0_GPIO00 50 /* LVDS0.GPIO0.IO00, LVDS0.PWM0.OUT, LSIO.GPIO1.IO04 */
+#define SC_P_LVDS0_GPIO01 51 /* LVDS0.GPIO0.IO01, LSIO.GPIO1.IO05 */
+#define SC_P_LVDS0_I2C0_SCL 52 /* LVDS0.I2C0.SCL, LVDS0.GPIO0.IO02, LSIO.GPIO1.IO06 */
+#define SC_P_LVDS0_I2C0_SDA 53 /* LVDS0.I2C0.SDA, LVDS0.GPIO0.IO03, LSIO.GPIO1.IO07 */
+#define SC_P_LVDS0_I2C1_SCL 54 /* LVDS0.I2C1.SCL, DMA.UART2.TX, LSIO.GPIO1.IO08 */
+#define SC_P_LVDS0_I2C1_SDA 55 /* LVDS0.I2C1.SDA, DMA.UART2.RX, LSIO.GPIO1.IO09 */
+#define SC_P_LVDS1_GPIO00 56 /* LVDS1.GPIO0.IO00, LVDS1.PWM0.OUT, LSIO.GPIO1.IO10 */
+#define SC_P_LVDS1_GPIO01 57 /* LVDS1.GPIO0.IO01, LSIO.GPIO1.IO11 */
+#define SC_P_LVDS1_I2C0_SCL 58 /* LVDS1.I2C0.SCL, LVDS1.GPIO0.IO02, LSIO.GPIO1.IO12 */
+#define SC_P_LVDS1_I2C0_SDA 59 /* LVDS1.I2C0.SDA, LVDS1.GPIO0.IO03, LSIO.GPIO1.IO13 */
+#define SC_P_LVDS1_I2C1_SCL 60 /* LVDS1.I2C1.SCL, DMA.UART3.TX, LSIO.GPIO1.IO14 */
+#define SC_P_LVDS1_I2C1_SDA 61 /* LVDS1.I2C1.SDA, DMA.UART3.RX, LSIO.GPIO1.IO15 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_LVDSGPIO 62 /* */
+#define SC_P_MIPI_DSI0_I2C0_SCL 63 /* MIPI_DSI0.I2C0.SCL, LSIO.GPIO1.IO16 */
+#define SC_P_MIPI_DSI0_I2C0_SDA 64 /* MIPI_DSI0.I2C0.SDA, LSIO.GPIO1.IO17 */
+#define SC_P_MIPI_DSI0_GPIO0_00 65 /* MIPI_DSI0.GPIO0.IO00, MIPI_DSI0.PWM0.OUT, LSIO.GPIO1.IO18 */
+#define SC_P_MIPI_DSI0_GPIO0_01 66 /* MIPI_DSI0.GPIO0.IO01, LSIO.GPIO1.IO19 */
+#define SC_P_MIPI_DSI1_I2C0_SCL 67 /* MIPI_DSI1.I2C0.SCL, LSIO.GPIO1.IO20 */
+#define SC_P_MIPI_DSI1_I2C0_SDA 68 /* MIPI_DSI1.I2C0.SDA, LSIO.GPIO1.IO21 */
+#define SC_P_MIPI_DSI1_GPIO0_00 69 /* MIPI_DSI1.GPIO0.IO00, MIPI_DSI1.PWM0.OUT, LSIO.GPIO1.IO22 */
+#define SC_P_MIPI_DSI1_GPIO0_01 70 /* MIPI_DSI1.GPIO0.IO01, LSIO.GPIO1.IO23 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_MIPIDSIGPIO 71 /* */
+#define SC_P_MIPI_CSI0_MCLK_OUT 72 /* MIPI_CSI0.ACM.MCLK_OUT, LSIO.GPIO1.IO24 */
+#define SC_P_MIPI_CSI0_I2C0_SCL 73 /* MIPI_CSI0.I2C0.SCL, LSIO.GPIO1.IO25 */
+#define SC_P_MIPI_CSI0_I2C0_SDA 74 /* MIPI_CSI0.I2C0.SDA, LSIO.GPIO1.IO26 */
+#define SC_P_MIPI_CSI0_GPIO0_00 75 /* MIPI_CSI0.GPIO0.IO00, DMA.I2C0.SCL, MIPI_CSI1.I2C0.SCL, LSIO.GPIO1.IO27 */
+#define SC_P_MIPI_CSI0_GPIO0_01 76 /* MIPI_CSI0.GPIO0.IO01, DMA.I2C0.SDA, MIPI_CSI1.I2C0.SDA, LSIO.GPIO1.IO28 */
+#define SC_P_MIPI_CSI1_MCLK_OUT 77 /* MIPI_CSI1.ACM.MCLK_OUT, LSIO.GPIO1.IO29 */
+#define SC_P_MIPI_CSI1_GPIO0_00 78 /* MIPI_CSI1.GPIO0.IO00, DMA.UART4.RX, LSIO.GPIO1.IO30 */
+#define SC_P_MIPI_CSI1_GPIO0_01 79 /* MIPI_CSI1.GPIO0.IO01, DMA.UART4.TX, LSIO.GPIO1.IO31 */
+#define SC_P_MIPI_CSI1_I2C0_SCL 80 /* MIPI_CSI1.I2C0.SCL, LSIO.GPIO2.IO00 */
+#define SC_P_MIPI_CSI1_I2C0_SDA 81 /* MIPI_CSI1.I2C0.SDA, LSIO.GPIO2.IO01 */
+#define SC_P_HDMI_TX0_TS_SCL 82 /* HDMI_TX0.I2C0.SCL, DMA.I2C0.SCL, LSIO.GPIO2.IO02 */
+#define SC_P_HDMI_TX0_TS_SDA 83 /* HDMI_TX0.I2C0.SDA, DMA.I2C0.SDA, LSIO.GPIO2.IO03 */
+#define SC_P_COMP_CTL_GPIO_3V3_HDMIGPIO 84 /* */
+#define SC_P_ESAI1_FSR 85 /* AUD.ESAI1.FSR, LSIO.GPIO2.IO04 */
+#define SC_P_ESAI1_FST 86 /* AUD.ESAI1.FST, AUD.SPDIF0.EXT_CLK, LSIO.GPIO2.IO05 */
+#define SC_P_ESAI1_SCKR 87 /* AUD.ESAI1.SCKR, LSIO.GPIO2.IO06 */
+#define SC_P_ESAI1_SCKT 88 /* AUD.ESAI1.SCKT, AUD.SAI2.RXC, AUD.SPDIF0.EXT_CLK, LSIO.GPIO2.IO07 */
+#define SC_P_ESAI1_TX0 89 /* AUD.ESAI1.TX0, AUD.SAI2.RXD, AUD.SPDIF0.RX, LSIO.GPIO2.IO08 */
+#define SC_P_ESAI1_TX1 90 /* AUD.ESAI1.TX1, AUD.SAI2.RXFS, AUD.SPDIF0.TX, LSIO.GPIO2.IO09 */
+#define SC_P_ESAI1_TX2_RX3 91 /* AUD.ESAI1.TX2_RX3, AUD.SPDIF0.RX, LSIO.GPIO2.IO10 */
+#define SC_P_ESAI1_TX3_RX2 92 /* AUD.ESAI1.TX3_RX2, AUD.SPDIF0.TX, LSIO.GPIO2.IO11 */
+#define SC_P_ESAI1_TX4_RX1 93 /* AUD.ESAI1.TX4_RX1, LSIO.GPIO2.IO12 */
+#define SC_P_ESAI1_TX5_RX0 94 /* AUD.ESAI1.TX5_RX0, LSIO.GPIO2.IO13 */
+#define SC_P_SPDIF0_RX 95 /* AUD.SPDIF0.RX, AUD.MQS.R, AUD.ACM.MCLK_IN1, LSIO.GPIO2.IO14 */
+#define SC_P_SPDIF0_TX 96 /* AUD.SPDIF0.TX, AUD.MQS.L, AUD.ACM.MCLK_OUT1, LSIO.GPIO2.IO15 */
+#define SC_P_SPDIF0_EXT_CLK 97 /* AUD.SPDIF0.EXT_CLK, DMA.DMA0.REQ_IN0, LSIO.GPIO2.IO16 */
+#define SC_P_SPI3_SCK 98 /* DMA.SPI3.SCK, LSIO.GPIO2.IO17 */
+#define SC_P_SPI3_SDO 99 /* DMA.SPI3.SDO, DMA.FTM.CH0, LSIO.GPIO2.IO18 */
+#define SC_P_SPI3_SDI 100 /* DMA.SPI3.SDI, DMA.FTM.CH1, LSIO.GPIO2.IO19 */
+#define SC_P_SPI3_CS0 101 /* DMA.SPI3.CS0, DMA.FTM.CH2, LSIO.GPIO2.IO20 */
+#define SC_P_SPI3_CS1 102 /* DMA.SPI3.CS1, LSIO.GPIO2.IO21 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB 103 /* */
+#define SC_P_ESAI0_FSR 104 /* AUD.ESAI0.FSR, LSIO.GPIO2.IO22 */
+#define SC_P_ESAI0_FST 105 /* AUD.ESAI0.FST, LSIO.GPIO2.IO23 */
+#define SC_P_ESAI0_SCKR 106 /* AUD.ESAI0.SCKR, LSIO.GPIO2.IO24 */
+#define SC_P_ESAI0_SCKT 107 /* AUD.ESAI0.SCKT, LSIO.GPIO2.IO25 */
+#define SC_P_ESAI0_TX0 108 /* AUD.ESAI0.TX0, LSIO.GPIO2.IO26 */
+#define SC_P_ESAI0_TX1 109 /* AUD.ESAI0.TX1, LSIO.GPIO2.IO27 */
+#define SC_P_ESAI0_TX2_RX3 110 /* AUD.ESAI0.TX2_RX3, LSIO.GPIO2.IO28 */
+#define SC_P_ESAI0_TX3_RX2 111 /* AUD.ESAI0.TX3_RX2, LSIO.GPIO2.IO29 */
+#define SC_P_ESAI0_TX4_RX1 112 /* AUD.ESAI0.TX4_RX1, LSIO.GPIO2.IO30 */
+#define SC_P_ESAI0_TX5_RX0 113 /* AUD.ESAI0.TX5_RX0, LSIO.GPIO2.IO31 */
+#define SC_P_MCLK_IN0 114 /* AUD.ACM.MCLK_IN0, AUD.ESAI0.RX_HF_CLK, AUD.ESAI1.RX_HF_CLK, LSIO.GPIO3.IO00 */
+#define SC_P_MCLK_OUT0 115 /* AUD.ACM.MCLK_OUT0, AUD.ESAI0.TX_HF_CLK, AUD.ESAI1.TX_HF_CLK, LSIO.GPIO3.IO01 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHC 116 /* */
+#define SC_P_SPI0_SCK 117 /* DMA.SPI0.SCK, AUD.SAI0.RXC, LSIO.GPIO3.IO02 */
+#define SC_P_SPI0_SDO 118 /* DMA.SPI0.SDO, AUD.SAI0.TXD, LSIO.GPIO3.IO03 */
+#define SC_P_SPI0_SDI 119 /* DMA.SPI0.SDI, AUD.SAI0.RXD, LSIO.GPIO3.IO04 */
+#define SC_P_SPI0_CS0 120 /* DMA.SPI0.CS0, AUD.SAI0.RXFS, LSIO.GPIO3.IO05 */
+#define SC_P_SPI0_CS1 121 /* DMA.SPI0.CS1, AUD.SAI0.TXC, LSIO.GPIO3.IO06 */
+#define SC_P_SPI2_SCK 122 /* DMA.SPI2.SCK, LSIO.GPIO3.IO07 */
+#define SC_P_SPI2_SDO 123 /* DMA.SPI2.SDO, LSIO.GPIO3.IO08 */
+#define SC_P_SPI2_SDI 124 /* DMA.SPI2.SDI, LSIO.GPIO3.IO09 */
+#define SC_P_SPI2_CS0 125 /* DMA.SPI2.CS0, LSIO.GPIO3.IO10 */
+#define SC_P_SPI2_CS1 126 /* DMA.SPI2.CS1, AUD.SAI0.TXFS, LSIO.GPIO3.IO11 */
+#define SC_P_SAI1_RXC 127 /* AUD.SAI1.RXC, AUD.SAI0.TXD, LSIO.GPIO3.IO12 */
+#define SC_P_SAI1_RXD 128 /* AUD.SAI1.RXD, AUD.SAI0.TXFS, LSIO.GPIO3.IO13 */
+#define SC_P_SAI1_RXFS 129 /* AUD.SAI1.RXFS, AUD.SAI0.RXD, LSIO.GPIO3.IO14 */
+#define SC_P_SAI1_TXC 130 /* AUD.SAI1.TXC, AUD.SAI0.TXC, LSIO.GPIO3.IO15 */
+#define SC_P_SAI1_TXD 131 /* AUD.SAI1.TXD, AUD.SAI1.RXC, LSIO.GPIO3.IO16 */
+#define SC_P_SAI1_TXFS 132 /* AUD.SAI1.TXFS, AUD.SAI1.RXFS, LSIO.GPIO3.IO17 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHT 133 /* */
+#define SC_P_ADC_IN7 134 /* DMA.ADC1.IN3, DMA.SPI1.CS1, LSIO.KPP0.ROW3, LSIO.GPIO3.IO25 */
+#define SC_P_ADC_IN6 135 /* DMA.ADC1.IN2, DMA.SPI1.CS0, LSIO.KPP0.ROW2, LSIO.GPIO3.IO24 */
+#define SC_P_ADC_IN5 136 /* DMA.ADC1.IN1, DMA.SPI1.SDI, LSIO.KPP0.ROW1, LSIO.GPIO3.IO23 */
+#define SC_P_ADC_IN4 137 /* DMA.ADC1.IN0, DMA.SPI1.SDO, LSIO.KPP0.ROW0, LSIO.GPIO3.IO22 */
+#define SC_P_ADC_IN3 138 /* DMA.ADC0.IN3, DMA.SPI1.SCK, LSIO.KPP0.COL3, LSIO.GPIO3.IO21 */
+#define SC_P_ADC_IN2 139 /* DMA.ADC0.IN2, LSIO.KPP0.COL2, LSIO.GPIO3.IO20 */
+#define SC_P_ADC_IN1 140 /* DMA.ADC0.IN1, LSIO.KPP0.COL1, LSIO.GPIO3.IO19 */
+#define SC_P_ADC_IN0 141 /* DMA.ADC0.IN0, LSIO.KPP0.COL0, LSIO.GPIO3.IO18 */
+#define SC_P_MLB_SIG 142 /* CONN.MLB.SIG, AUD.SAI3.RXC, LSIO.GPIO3.IO26 */
+#define SC_P_MLB_CLK 143 /* CONN.MLB.CLK, AUD.SAI3.RXFS, LSIO.GPIO3.IO27 */
+#define SC_P_MLB_DATA 144 /* CONN.MLB.DATA, AUD.SAI3.RXD, LSIO.GPIO3.IO28 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOLHT 145 /* */
+#define SC_P_FLEXCAN0_RX 146 /* DMA.FLEXCAN0.RX, LSIO.GPIO3.IO29 */
+#define SC_P_FLEXCAN0_TX 147 /* DMA.FLEXCAN0.TX, LSIO.GPIO3.IO30 */
+#define SC_P_FLEXCAN1_RX 148 /* DMA.FLEXCAN1.RX, LSIO.GPIO3.IO31 */
+#define SC_P_FLEXCAN1_TX 149 /* DMA.FLEXCAN1.TX, LSIO.GPIO4.IO00 */
+#define SC_P_FLEXCAN2_RX 150 /* DMA.FLEXCAN2.RX, LSIO.GPIO4.IO01 */
+#define SC_P_FLEXCAN2_TX 151 /* DMA.FLEXCAN2.TX, LSIO.GPIO4.IO02 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOTHR 152 /* */
+#define SC_P_USB_SS3_TC0 153 /* DMA.I2C1.SCL, CONN.USB_OTG1.PWR, LSIO.GPIO4.IO03 */
+#define SC_P_USB_SS3_TC1 154 /* DMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO04 */
+#define SC_P_USB_SS3_TC2 155 /* DMA.I2C1.SDA, CONN.USB_OTG1.OC, LSIO.GPIO4.IO05 */
+#define SC_P_USB_SS3_TC3 156 /* DMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO06 */
+#define SC_P_COMP_CTL_GPIO_3V3_USB3IO 157 /* */
+#define SC_P_USDHC1_RESET_B 158 /* CONN.USDHC1.RESET_B, LSIO.GPIO4.IO07 */
+#define SC_P_USDHC1_VSELECT 159 /* CONN.USDHC1.VSELECT, LSIO.GPIO4.IO08 */
+#define SC_P_USDHC2_RESET_B 160 /* CONN.USDHC2.RESET_B, LSIO.GPIO4.IO09 */
+#define SC_P_USDHC2_VSELECT 161 /* CONN.USDHC2.VSELECT, LSIO.GPIO4.IO10 */
+#define SC_P_USDHC2_WP 162 /* CONN.USDHC2.WP, LSIO.GPIO4.IO11 */
+#define SC_P_USDHC2_CD_B 163 /* CONN.USDHC2.CD_B, LSIO.GPIO4.IO12 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSELSEP 164 /* */
+#define SC_P_ENET0_MDIO 165 /* CONN.ENET0.MDIO, DMA.I2C4.SDA, LSIO.GPIO4.IO13 */
+#define SC_P_ENET0_MDC 166 /* CONN.ENET0.MDC, DMA.I2C4.SCL, LSIO.GPIO4.IO14 */
+#define SC_P_ENET0_REFCLK_125M_25M 167 /* CONN.ENET0.REFCLK_125M_25M, CONN.ENET0.PPS, LSIO.GPIO4.IO15 */
+#define SC_P_ENET1_REFCLK_125M_25M 168 /* CONN.ENET1.REFCLK_125M_25M, CONN.ENET1.PPS, LSIO.GPIO4.IO16 */
+#define SC_P_ENET1_MDIO 169 /* CONN.ENET1.MDIO, DMA.I2C4.SDA, LSIO.GPIO4.IO17 */
+#define SC_P_ENET1_MDC 170 /* CONN.ENET1.MDC, DMA.I2C4.SCL, LSIO.GPIO4.IO18 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOCT 171 /* */
+#define SC_P_QSPI1A_SS0_B 172 /* LSIO.QSPI1A.SS0_B, LSIO.GPIO4.IO19 */
+#define SC_P_QSPI1A_SS1_B 173 /* LSIO.QSPI1A.SS1_B, LSIO.QSPI1A.SCLK2, LSIO.GPIO4.IO20 */
+#define SC_P_QSPI1A_SCLK 174 /* LSIO.QSPI1A.SCLK, LSIO.GPIO4.IO21 */
+#define SC_P_QSPI1A_DQS 175 /* LSIO.QSPI1A.DQS, LSIO.GPIO4.IO22 */
+#define SC_P_QSPI1A_DATA3 176 /* LSIO.QSPI1A.DATA3, DMA.I2C1.SDA, CONN.USB_OTG1.OC, LSIO.GPIO4.IO23 */
+#define SC_P_QSPI1A_DATA2 177 /* LSIO.QSPI1A.DATA2, DMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO24 */
+#define SC_P_QSPI1A_DATA1 178 /* LSIO.QSPI1A.DATA1, DMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO25 */
+#define SC_P_QSPI1A_DATA0 179 /* LSIO.QSPI1A.DATA0, LSIO.GPIO4.IO26 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI1 180 /* */
+#define SC_P_QSPI0A_DATA0 181 /* LSIO.QSPI0A.DATA0 */
+#define SC_P_QSPI0A_DATA1 182 /* LSIO.QSPI0A.DATA1 */
+#define SC_P_QSPI0A_DATA2 183 /* LSIO.QSPI0A.DATA2 */
+#define SC_P_QSPI0A_DATA3 184 /* LSIO.QSPI0A.DATA3 */
+#define SC_P_QSPI0A_DQS 185 /* LSIO.QSPI0A.DQS */
+#define SC_P_QSPI0A_SS0_B 186 /* LSIO.QSPI0A.SS0_B */
+#define SC_P_QSPI0A_SS1_B 187 /* LSIO.QSPI0A.SS1_B, LSIO.QSPI0A.SCLK2 */
+#define SC_P_QSPI0A_SCLK 188 /* LSIO.QSPI0A.SCLK */
+#define SC_P_QSPI0B_SCLK 189 /* LSIO.QSPI0B.SCLK */
+#define SC_P_QSPI0B_DATA0 190 /* LSIO.QSPI0B.DATA0 */
+#define SC_P_QSPI0B_DATA1 191 /* LSIO.QSPI0B.DATA1 */
+#define SC_P_QSPI0B_DATA2 192 /* LSIO.QSPI0B.DATA2 */
+#define SC_P_QSPI0B_DATA3 193 /* LSIO.QSPI0B.DATA3 */
+#define SC_P_QSPI0B_DQS 194 /* LSIO.QSPI0B.DQS */
+#define SC_P_QSPI0B_SS0_B 195 /* LSIO.QSPI0B.SS0_B */
+#define SC_P_QSPI0B_SS1_B 196 /* LSIO.QSPI0B.SS1_B, LSIO.QSPI0B.SCLK2 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0 197 /* */
+#define SC_P_PCIE_CTRL0_CLKREQ_B 198 /* HSIO.PCIE0.CLKREQ_B, LSIO.GPIO4.IO27 */
+#define SC_P_PCIE_CTRL0_WAKE_B 199 /* HSIO.PCIE0.WAKE_B, LSIO.GPIO4.IO28 */
+#define SC_P_PCIE_CTRL0_PERST_B 200 /* HSIO.PCIE0.PERST_B, LSIO.GPIO4.IO29 */
+#define SC_P_PCIE_CTRL1_CLKREQ_B 201 /* HSIO.PCIE1.CLKREQ_B, DMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO30 */
+#define SC_P_PCIE_CTRL1_WAKE_B 202 /* HSIO.PCIE1.WAKE_B, DMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO31 */
+#define SC_P_PCIE_CTRL1_PERST_B 203 /* HSIO.PCIE1.PERST_B, DMA.I2C1.SCL, CONN.USB_OTG1.PWR, LSIO.GPIO5.IO00 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_PCIESEP 204 /* */
+#define SC_P_USB_HSIC0_DATA 205 /* CONN.USB_HSIC0.DATA, DMA.I2C1.SDA, LSIO.GPIO5.IO01 */
+#define SC_P_USB_HSIC0_STROBE 206 /* CONN.USB_HSIC0.STROBE, DMA.I2C1.SCL, LSIO.GPIO5.IO02 */
+#define SC_P_CALIBRATION_0_HSIC 207 /* */
+#define SC_P_CALIBRATION_1_HSIC 208 /* */
+#define SC_P_EMMC0_CLK 209 /* CONN.EMMC0.CLK, CONN.NAND.READY_B */
+#define SC_P_EMMC0_CMD 210 /* CONN.EMMC0.CMD, CONN.NAND.DQS, AUD.MQS.R, LSIO.GPIO5.IO03 */
+#define SC_P_EMMC0_DATA0 211 /* CONN.EMMC0.DATA0, CONN.NAND.DATA00, LSIO.GPIO5.IO04 */
+#define SC_P_EMMC0_DATA1 212 /* CONN.EMMC0.DATA1, CONN.NAND.DATA01, LSIO.GPIO5.IO05 */
+#define SC_P_EMMC0_DATA2 213 /* CONN.EMMC0.DATA2, CONN.NAND.DATA02, LSIO.GPIO5.IO06 */
+#define SC_P_EMMC0_DATA3 214 /* CONN.EMMC0.DATA3, CONN.NAND.DATA03, LSIO.GPIO5.IO07 */
+#define SC_P_EMMC0_DATA4 215 /* CONN.EMMC0.DATA4, CONN.NAND.DATA04, LSIO.GPIO5.IO08 */
+#define SC_P_EMMC0_DATA5 216 /* CONN.EMMC0.DATA5, CONN.NAND.DATA05, LSIO.GPIO5.IO09 */
+#define SC_P_EMMC0_DATA6 217 /* CONN.EMMC0.DATA6, CONN.NAND.DATA06, LSIO.GPIO5.IO10 */
+#define SC_P_EMMC0_DATA7 218 /* CONN.EMMC0.DATA7, CONN.NAND.DATA07, LSIO.GPIO5.IO11 */
+#define SC_P_EMMC0_STROBE 219 /* CONN.EMMC0.STROBE, CONN.NAND.CLE, LSIO.GPIO5.IO12 */
+#define SC_P_EMMC0_RESET_B 220 /* CONN.EMMC0.RESET_B, CONN.NAND.WP_B, CONN.USDHC1.VSELECT, LSIO.GPIO5.IO13 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX 221 /* */
+#define SC_P_USDHC1_CLK 222 /* CONN.USDHC1.CLK, AUD.MQS.R */
+#define SC_P_USDHC1_CMD 223 /* CONN.USDHC1.CMD, AUD.MQS.L, LSIO.GPIO5.IO14 */
+#define SC_P_USDHC1_DATA0 224 /* CONN.USDHC1.DATA0, CONN.NAND.RE_N, LSIO.GPIO5.IO15 */
+#define SC_P_USDHC1_DATA1 225 /* CONN.USDHC1.DATA1, CONN.NAND.RE_P, LSIO.GPIO5.IO16 */
+#define SC_P_CTL_NAND_RE_P_N 226 /* */
+#define SC_P_USDHC1_DATA2 227 /* CONN.USDHC1.DATA2, CONN.NAND.DQS_N, LSIO.GPIO5.IO17 */
+#define SC_P_USDHC1_DATA3 228 /* CONN.USDHC1.DATA3, CONN.NAND.DQS_P, LSIO.GPIO5.IO18 */
+#define SC_P_CTL_NAND_DQS_P_N 229 /* */
+#define SC_P_USDHC1_DATA4 230 /* CONN.USDHC1.DATA4, CONN.NAND.CE0_B, AUD.MQS.R, LSIO.GPIO5.IO19 */
+#define SC_P_USDHC1_DATA5 231 /* CONN.USDHC1.DATA5, CONN.NAND.RE_B, AUD.MQS.L, LSIO.GPIO5.IO20 */
+#define SC_P_USDHC1_DATA6 232 /* CONN.USDHC1.DATA6, CONN.NAND.WE_B, CONN.USDHC1.WP, LSIO.GPIO5.IO21 */
+#define SC_P_USDHC1_DATA7 233 /* CONN.USDHC1.DATA7, CONN.NAND.ALE, CONN.USDHC1.CD_B, LSIO.GPIO5.IO22 */
+#define SC_P_USDHC1_STROBE 234 /* CONN.USDHC1.STROBE, CONN.NAND.CE1_B, CONN.USDHC1.RESET_B, LSIO.GPIO5.IO23 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSEL2 235 /* */
+#define SC_P_USDHC2_CLK 236 /* CONN.USDHC2.CLK, AUD.MQS.R, LSIO.GPIO5.IO24 */
+#define SC_P_USDHC2_CMD 237 /* CONN.USDHC2.CMD, AUD.MQS.L, LSIO.GPIO5.IO25 */
+#define SC_P_USDHC2_DATA0 238 /* CONN.USDHC2.DATA0, DMA.UART4.RX, LSIO.GPIO5.IO26 */
+#define SC_P_USDHC2_DATA1 239 /* CONN.USDHC2.DATA1, DMA.UART4.TX, LSIO.GPIO5.IO27 */
+#define SC_P_USDHC2_DATA2 240 /* CONN.USDHC2.DATA2, DMA.UART4.CTS_B, LSIO.GPIO5.IO28 */
+#define SC_P_USDHC2_DATA3 241 /* CONN.USDHC2.DATA3, DMA.UART4.RTS_B, LSIO.GPIO5.IO29 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSEL3 242 /* */
+#define SC_P_ENET0_RGMII_TXC 243 /* CONN.ENET0.RGMII_TXC, CONN.ENET0.RCLK50M_OUT, CONN.ENET0.RCLK50M_IN, LSIO.GPIO5.IO30 */
+#define SC_P_ENET0_RGMII_TX_CTL 244 /* CONN.ENET0.RGMII_TX_CTL, LSIO.GPIO5.IO31 */
+#define SC_P_ENET0_RGMII_TXD0 245 /* CONN.ENET0.RGMII_TXD0, LSIO.GPIO6.IO00 */
+#define SC_P_ENET0_RGMII_TXD1 246 /* CONN.ENET0.RGMII_TXD1, LSIO.GPIO6.IO01 */
+#define SC_P_ENET0_RGMII_TXD2 247 /* CONN.ENET0.RGMII_TXD2, DMA.UART3.TX, VPU.TSI_S1.VID, LSIO.GPIO6.IO02 */
+#define SC_P_ENET0_RGMII_TXD3 248 /* CONN.ENET0.RGMII_TXD3, DMA.UART3.RTS_B, VPU.TSI_S1.SYNC, LSIO.GPIO6.IO03 */
+#define SC_P_ENET0_RGMII_RXC 249 /* CONN.ENET0.RGMII_RXC, DMA.UART3.CTS_B, VPU.TSI_S1.DATA, LSIO.GPIO6.IO04 */
+#define SC_P_ENET0_RGMII_RX_CTL 250 /* CONN.ENET0.RGMII_RX_CTL, VPU.TSI_S0.VID, LSIO.GPIO6.IO05 */
+#define SC_P_ENET0_RGMII_RXD0 251 /* CONN.ENET0.RGMII_RXD0, VPU.TSI_S0.SYNC, LSIO.GPIO6.IO06 */
+#define SC_P_ENET0_RGMII_RXD1 252 /* CONN.ENET0.RGMII_RXD1, VPU.TSI_S0.DATA, LSIO.GPIO6.IO07 */
+#define SC_P_ENET0_RGMII_RXD2 253 /* CONN.ENET0.RGMII_RXD2, CONN.ENET0.RMII_RX_ER, VPU.TSI_S0.CLK, LSIO.GPIO6.IO08 */
+#define SC_P_ENET0_RGMII_RXD3 254 /* CONN.ENET0.RGMII_RXD3, DMA.UART3.RX, VPU.TSI_S1.CLK, LSIO.GPIO6.IO09 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB 255 /* */
+#define SC_P_ENET1_RGMII_TXC 256 /* CONN.ENET1.RGMII_TXC, CONN.ENET1.RCLK50M_OUT, CONN.ENET1.RCLK50M_IN, LSIO.GPIO6.IO10 */
+#define SC_P_ENET1_RGMII_TX_CTL 257 /* CONN.ENET1.RGMII_TX_CTL, LSIO.GPIO6.IO11 */
+#define SC_P_ENET1_RGMII_TXD0 258 /* CONN.ENET1.RGMII_TXD0, LSIO.GPIO6.IO12 */
+#define SC_P_ENET1_RGMII_TXD1 259 /* CONN.ENET1.RGMII_TXD1, LSIO.GPIO6.IO13 */
+#define SC_P_ENET1_RGMII_TXD2 260 /* CONN.ENET1.RGMII_TXD2, DMA.UART3.TX, VPU.TSI_S1.VID, LSIO.GPIO6.IO14 */
+#define SC_P_ENET1_RGMII_TXD3 261 /* CONN.ENET1.RGMII_TXD3, DMA.UART3.RTS_B, VPU.TSI_S1.SYNC, LSIO.GPIO6.IO15 */
+#define SC_P_ENET1_RGMII_RXC 262 /* CONN.ENET1.RGMII_RXC, DMA.UART3.CTS_B, VPU.TSI_S1.DATA, LSIO.GPIO6.IO16 */
+#define SC_P_ENET1_RGMII_RX_CTL 263 /* CONN.ENET1.RGMII_RX_CTL, VPU.TSI_S0.VID, LSIO.GPIO6.IO17 */
+#define SC_P_ENET1_RGMII_RXD0 264 /* CONN.ENET1.RGMII_RXD0, VPU.TSI_S0.SYNC, LSIO.GPIO6.IO18 */
+#define SC_P_ENET1_RGMII_RXD1 265 /* CONN.ENET1.RGMII_RXD1, VPU.TSI_S0.DATA, LSIO.GPIO6.IO19 */
+#define SC_P_ENET1_RGMII_RXD2 266 /* CONN.ENET1.RGMII_RXD2, CONN.ENET1.RMII_RX_ER, VPU.TSI_S0.CLK, LSIO.GPIO6.IO20 */
+#define SC_P_ENET1_RGMII_RXD3 267 /* CONN.ENET1.RGMII_RXD3, DMA.UART3.RX, VPU.TSI_S1.CLK, LSIO.GPIO6.IO21 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA 268 /* */
+/*@}*/
+
+/*!
+ * @name Pad Mux Definitions
+ * format: name padid padmux
+ */
+/*@{*/
+#define SC_P_SIM0_CLK_DMA_SIM0_CLK SC_P_SIM0_CLK 0
+#define SC_P_SIM0_CLK_LSIO_GPIO0_IO00 SC_P_SIM0_CLK 3
+#define SC_P_SIM0_RST_DMA_SIM0_RST SC_P_SIM0_RST 0
+#define SC_P_SIM0_RST_LSIO_GPIO0_IO01 SC_P_SIM0_RST 3
+#define SC_P_SIM0_IO_DMA_SIM0_IO SC_P_SIM0_IO 0
+#define SC_P_SIM0_IO_LSIO_GPIO0_IO02 SC_P_SIM0_IO 3
+#define SC_P_SIM0_PD_DMA_SIM0_PD SC_P_SIM0_PD 0
+#define SC_P_SIM0_PD_DMA_I2C3_SCL SC_P_SIM0_PD 1
+#define SC_P_SIM0_PD_LSIO_GPIO0_IO03 SC_P_SIM0_PD 3
+#define SC_P_SIM0_POWER_EN_DMA_SIM0_POWER_EN SC_P_SIM0_POWER_EN 0
+#define SC_P_SIM0_POWER_EN_DMA_I2C3_SDA SC_P_SIM0_POWER_EN 1
+#define SC_P_SIM0_POWER_EN_LSIO_GPIO0_IO04 SC_P_SIM0_POWER_EN 3
+#define SC_P_SIM0_GPIO0_00_DMA_SIM0_POWER_EN SC_P_SIM0_GPIO0_00 0
+#define SC_P_SIM0_GPIO0_00_LSIO_GPIO0_IO05 SC_P_SIM0_GPIO0_00 3
+#define SC_P_M40_I2C0_SCL_M40_I2C0_SCL SC_P_M40_I2C0_SCL 0
+#define SC_P_M40_I2C0_SCL_M40_UART0_RX SC_P_M40_I2C0_SCL 1
+#define SC_P_M40_I2C0_SCL_M40_GPIO0_IO02 SC_P_M40_I2C0_SCL 2
+#define SC_P_M40_I2C0_SCL_LSIO_GPIO0_IO06 SC_P_M40_I2C0_SCL 3
+#define SC_P_M40_I2C0_SDA_M40_I2C0_SDA SC_P_M40_I2C0_SDA 0
+#define SC_P_M40_I2C0_SDA_M40_UART0_TX SC_P_M40_I2C0_SDA 1
+#define SC_P_M40_I2C0_SDA_M40_GPIO0_IO03 SC_P_M40_I2C0_SDA 2
+#define SC_P_M40_I2C0_SDA_LSIO_GPIO0_IO07 SC_P_M40_I2C0_SDA 3
+#define SC_P_M40_GPIO0_00_M40_GPIO0_IO00 SC_P_M40_GPIO0_00 0
+#define SC_P_M40_GPIO0_00_M40_TPM0_CH0 SC_P_M40_GPIO0_00 1
+#define SC_P_M40_GPIO0_00_DMA_UART4_RX SC_P_M40_GPIO0_00 2
+#define SC_P_M40_GPIO0_00_LSIO_GPIO0_IO08 SC_P_M40_GPIO0_00 3
+#define SC_P_M40_GPIO0_01_M40_GPIO0_IO01 SC_P_M40_GPIO0_01 0
+#define SC_P_M40_GPIO0_01_M40_TPM0_CH1 SC_P_M40_GPIO0_01 1
+#define SC_P_M40_GPIO0_01_DMA_UART4_TX SC_P_M40_GPIO0_01 2
+#define SC_P_M40_GPIO0_01_LSIO_GPIO0_IO09 SC_P_M40_GPIO0_01 3
+#define SC_P_M41_I2C0_SCL_M41_I2C0_SCL SC_P_M41_I2C0_SCL 0
+#define SC_P_M41_I2C0_SCL_M41_UART0_RX SC_P_M41_I2C0_SCL 1
+#define SC_P_M41_I2C0_SCL_M41_GPIO0_IO02 SC_P_M41_I2C0_SCL 2
+#define SC_P_M41_I2C0_SCL_LSIO_GPIO0_IO10 SC_P_M41_I2C0_SCL 3
+#define SC_P_M41_I2C0_SDA_M41_I2C0_SDA SC_P_M41_I2C0_SDA 0
+#define SC_P_M41_I2C0_SDA_M41_UART0_TX SC_P_M41_I2C0_SDA 1
+#define SC_P_M41_I2C0_SDA_M41_GPIO0_IO03 SC_P_M41_I2C0_SDA 2
+#define SC_P_M41_I2C0_SDA_LSIO_GPIO0_IO11 SC_P_M41_I2C0_SDA 3
+#define SC_P_M41_GPIO0_00_M41_GPIO0_IO00 SC_P_M41_GPIO0_00 0
+#define SC_P_M41_GPIO0_00_M41_TPM0_CH0 SC_P_M41_GPIO0_00 1
+#define SC_P_M41_GPIO0_00_DMA_UART3_RX SC_P_M41_GPIO0_00 2
+#define SC_P_M41_GPIO0_00_LSIO_GPIO0_IO12 SC_P_M41_GPIO0_00 3
+#define SC_P_M41_GPIO0_01_M41_GPIO0_IO01 SC_P_M41_GPIO0_01 0
+#define SC_P_M41_GPIO0_01_M41_TPM0_CH1 SC_P_M41_GPIO0_01 1
+#define SC_P_M41_GPIO0_01_DMA_UART3_TX SC_P_M41_GPIO0_01 2
+#define SC_P_M41_GPIO0_01_LSIO_GPIO0_IO13 SC_P_M41_GPIO0_01 3
+#define SC_P_GPT0_CLK_LSIO_GPT0_CLK SC_P_GPT0_CLK 0
+#define SC_P_GPT0_CLK_DMA_I2C1_SCL SC_P_GPT0_CLK 1
+#define SC_P_GPT0_CLK_LSIO_KPP0_COL4 SC_P_GPT0_CLK 2
+#define SC_P_GPT0_CLK_LSIO_GPIO0_IO14 SC_P_GPT0_CLK 3
+#define SC_P_GPT0_CAPTURE_LSIO_GPT0_CAPTURE SC_P_GPT0_CAPTURE 0
+#define SC_P_GPT0_CAPTURE_DMA_I2C1_SDA SC_P_GPT0_CAPTURE 1
+#define SC_P_GPT0_CAPTURE_LSIO_KPP0_COL5 SC_P_GPT0_CAPTURE 2
+#define SC_P_GPT0_CAPTURE_LSIO_GPIO0_IO15 SC_P_GPT0_CAPTURE 3
+#define SC_P_GPT0_COMPARE_LSIO_GPT0_COMPARE SC_P_GPT0_COMPARE 0
+#define SC_P_GPT0_COMPARE_LSIO_PWM3_OUT SC_P_GPT0_COMPARE 1
+#define SC_P_GPT0_COMPARE_LSIO_KPP0_COL6 SC_P_GPT0_COMPARE 2
+#define SC_P_GPT0_COMPARE_LSIO_GPIO0_IO16 SC_P_GPT0_COMPARE 3
+#define SC_P_GPT1_CLK_LSIO_GPT1_CLK SC_P_GPT1_CLK 0
+#define SC_P_GPT1_CLK_DMA_I2C2_SCL SC_P_GPT1_CLK 1
+#define SC_P_GPT1_CLK_LSIO_KPP0_COL7 SC_P_GPT1_CLK 2
+#define SC_P_GPT1_CLK_LSIO_GPIO0_IO17 SC_P_GPT1_CLK 3
+#define SC_P_GPT1_CAPTURE_LSIO_GPT1_CAPTURE SC_P_GPT1_CAPTURE 0
+#define SC_P_GPT1_CAPTURE_DMA_I2C2_SDA SC_P_GPT1_CAPTURE 1
+#define SC_P_GPT1_CAPTURE_LSIO_KPP0_ROW4 SC_P_GPT1_CAPTURE 2
+#define SC_P_GPT1_CAPTURE_LSIO_GPIO0_IO18 SC_P_GPT1_CAPTURE 3
+#define SC_P_GPT1_COMPARE_LSIO_GPT1_COMPARE SC_P_GPT1_COMPARE 0
+#define SC_P_GPT1_COMPARE_LSIO_PWM2_OUT SC_P_GPT1_COMPARE 1
+#define SC_P_GPT1_COMPARE_LSIO_KPP0_ROW5 SC_P_GPT1_COMPARE 2
+#define SC_P_GPT1_COMPARE_LSIO_GPIO0_IO19 SC_P_GPT1_COMPARE 3
+#define SC_P_UART0_RX_DMA_UART0_RX SC_P_UART0_RX 0
+#define SC_P_UART0_RX_SCU_UART0_RX SC_P_UART0_RX 1
+#define SC_P_UART0_RX_LSIO_GPIO0_IO20 SC_P_UART0_RX 3
+#define SC_P_UART0_TX_DMA_UART0_TX SC_P_UART0_TX 0
+#define SC_P_UART0_TX_SCU_UART0_TX SC_P_UART0_TX 1
+#define SC_P_UART0_TX_LSIO_GPIO0_IO21 SC_P_UART0_TX 3
+#define SC_P_UART0_RTS_B_DMA_UART0_RTS_B SC_P_UART0_RTS_B 0
+#define SC_P_UART0_RTS_B_LSIO_PWM0_OUT SC_P_UART0_RTS_B 1
+#define SC_P_UART0_RTS_B_DMA_UART2_RX SC_P_UART0_RTS_B 2
+#define SC_P_UART0_RTS_B_LSIO_GPIO0_IO22 SC_P_UART0_RTS_B 3
+#define SC_P_UART0_CTS_B_DMA_UART0_CTS_B SC_P_UART0_CTS_B 0
+#define SC_P_UART0_CTS_B_LSIO_PWM1_OUT SC_P_UART0_CTS_B 1
+#define SC_P_UART0_CTS_B_DMA_UART2_TX SC_P_UART0_CTS_B 2
+#define SC_P_UART0_CTS_B_LSIO_GPIO0_IO23 SC_P_UART0_CTS_B 3
+#define SC_P_UART1_TX_DMA_UART1_TX SC_P_UART1_TX 0
+#define SC_P_UART1_TX_DMA_SPI3_SCK SC_P_UART1_TX 1
+#define SC_P_UART1_TX_LSIO_GPIO0_IO24 SC_P_UART1_TX 3
+#define SC_P_UART1_RX_DMA_UART1_RX SC_P_UART1_RX 0
+#define SC_P_UART1_RX_DMA_SPI3_SDO SC_P_UART1_RX 1
+#define SC_P_UART1_RX_LSIO_GPIO0_IO25 SC_P_UART1_RX 3
+#define SC_P_UART1_RTS_B_DMA_UART1_RTS_B SC_P_UART1_RTS_B 0
+#define SC_P_UART1_RTS_B_DMA_SPI3_SDI SC_P_UART1_RTS_B 1
+#define SC_P_UART1_RTS_B_DMA_UART1_CTS_B SC_P_UART1_RTS_B 2
+#define SC_P_UART1_RTS_B_LSIO_GPIO0_IO26 SC_P_UART1_RTS_B 3
+#define SC_P_UART1_CTS_B_DMA_UART1_CTS_B SC_P_UART1_CTS_B 0
+#define SC_P_UART1_CTS_B_DMA_SPI3_CS0 SC_P_UART1_CTS_B 1
+#define SC_P_UART1_CTS_B_DMA_UART1_RTS_B SC_P_UART1_CTS_B 2
+#define SC_P_UART1_CTS_B_LSIO_GPIO0_IO27 SC_P_UART1_CTS_B 3
+#define SC_P_SCU_PMIC_MEMC_ON_SCU_GPIO0_IOXX_PMIC_MEMC_ON SC_P_SCU_PMIC_MEMC_ON 0
+#define SC_P_SCU_WDOG_OUT_SCU_WDOG0_WDOG_OUT SC_P_SCU_WDOG_OUT 0
+#define SC_P_PMIC_I2C_SDA_SCU_PMIC_I2C_SDA SC_P_PMIC_I2C_SDA 0
+#define SC_P_PMIC_I2C_SCL_SCU_PMIC_I2C_SCL SC_P_PMIC_I2C_SCL 0
+#define SC_P_PMIC_EARLY_WARNING_SCU_PMIC_EARLY_WARNING SC_P_PMIC_EARLY_WARNING 0
+#define SC_P_PMIC_INT_B_SCU_DSC_PMIC_INT_B SC_P_PMIC_INT_B 0
+#define SC_P_SCU_GPIO0_00_SCU_GPIO0_IO00 SC_P_SCU_GPIO0_00 0
+#define SC_P_SCU_GPIO0_00_SCU_UART0_RX SC_P_SCU_GPIO0_00 1
+#define SC_P_SCU_GPIO0_00_LSIO_GPIO0_IO28 SC_P_SCU_GPIO0_00 3
+#define SC_P_SCU_GPIO0_01_SCU_GPIO0_IO01 SC_P_SCU_GPIO0_01 0
+#define SC_P_SCU_GPIO0_01_SCU_UART0_TX SC_P_SCU_GPIO0_01 1
+#define SC_P_SCU_GPIO0_01_LSIO_GPIO0_IO29 SC_P_SCU_GPIO0_01 3
+#define SC_P_SCU_GPIO0_02_SCU_GPIO0_IO02 SC_P_SCU_GPIO0_02 0
+#define SC_P_SCU_GPIO0_02_SCU_GPIO0_IOXX_PMIC_GPU0_ON SC_P_SCU_GPIO0_02 1
+#define SC_P_SCU_GPIO0_02_LSIO_GPIO0_IO30 SC_P_SCU_GPIO0_02 3
+#define SC_P_SCU_GPIO0_03_SCU_GPIO0_IO03 SC_P_SCU_GPIO0_03 0
+#define SC_P_SCU_GPIO0_03_SCU_GPIO0_IOXX_PMIC_GPU1_ON SC_P_SCU_GPIO0_03 1
+#define SC_P_SCU_GPIO0_03_LSIO_GPIO0_IO31 SC_P_SCU_GPIO0_03 3
+#define SC_P_SCU_GPIO0_04_SCU_GPIO0_IO04 SC_P_SCU_GPIO0_04 0
+#define SC_P_SCU_GPIO0_04_SCU_GPIO0_IOXX_PMIC_A72_ON SC_P_SCU_GPIO0_04 1
+#define SC_P_SCU_GPIO0_04_LSIO_GPIO1_IO00 SC_P_SCU_GPIO0_04 3
+#define SC_P_SCU_GPIO0_05_SCU_GPIO0_IO05 SC_P_SCU_GPIO0_05 0
+#define SC_P_SCU_GPIO0_05_SCU_GPIO0_IOXX_PMIC_A53_ON SC_P_SCU_GPIO0_05 1
+#define SC_P_SCU_GPIO0_05_LSIO_GPIO1_IO01 SC_P_SCU_GPIO0_05 3
+#define SC_P_SCU_GPIO0_06_SCU_GPIO0_IO06 SC_P_SCU_GPIO0_06 0
+#define SC_P_SCU_GPIO0_06_SCU_TPM0_CH0 SC_P_SCU_GPIO0_06 1
+#define SC_P_SCU_GPIO0_06_LSIO_GPIO1_IO02 SC_P_SCU_GPIO0_06 3
+#define SC_P_SCU_GPIO0_07_SCU_GPIO0_IO07 SC_P_SCU_GPIO0_07 0
+#define SC_P_SCU_GPIO0_07_SCU_TPM0_CH1 SC_P_SCU_GPIO0_07 1
+#define SC_P_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K SC_P_SCU_GPIO0_07 2
+#define SC_P_SCU_GPIO0_07_LSIO_GPIO1_IO03 SC_P_SCU_GPIO0_07 3
+#define SC_P_SCU_BOOT_MODE0_SCU_DSC_BOOT_MODE0 SC_P_SCU_BOOT_MODE0 0
+#define SC_P_SCU_BOOT_MODE1_SCU_DSC_BOOT_MODE1 SC_P_SCU_BOOT_MODE1 0
+#define SC_P_SCU_BOOT_MODE2_SCU_DSC_BOOT_MODE2 SC_P_SCU_BOOT_MODE2 0
+#define SC_P_SCU_BOOT_MODE3_SCU_DSC_BOOT_MODE3 SC_P_SCU_BOOT_MODE3 0
+#define SC_P_SCU_BOOT_MODE4_SCU_DSC_BOOT_MODE4 SC_P_SCU_BOOT_MODE4 0
+#define SC_P_SCU_BOOT_MODE4_SCU_PMIC_I2C_SCL SC_P_SCU_BOOT_MODE4 1
+#define SC_P_SCU_BOOT_MODE5_SCU_DSC_BOOT_MODE5 SC_P_SCU_BOOT_MODE5 0
+#define SC_P_SCU_BOOT_MODE5_SCU_PMIC_I2C_SDA SC_P_SCU_BOOT_MODE5 1
+#define SC_P_LVDS0_GPIO00_LVDS0_GPIO0_IO00 SC_P_LVDS0_GPIO00 0
+#define SC_P_LVDS0_GPIO00_LVDS0_PWM0_OUT SC_P_LVDS0_GPIO00 1
+#define SC_P_LVDS0_GPIO00_LSIO_GPIO1_IO04 SC_P_LVDS0_GPIO00 3
+#define SC_P_LVDS0_GPIO01_LVDS0_GPIO0_IO01 SC_P_LVDS0_GPIO01 0
+#define SC_P_LVDS0_GPIO01_LSIO_GPIO1_IO05 SC_P_LVDS0_GPIO01 3
+#define SC_P_LVDS0_I2C0_SCL_LVDS0_I2C0_SCL SC_P_LVDS0_I2C0_SCL 0
+#define SC_P_LVDS0_I2C0_SCL_LVDS0_GPIO0_IO02 SC_P_LVDS0_I2C0_SCL 1
+#define SC_P_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 SC_P_LVDS0_I2C0_SCL 3
+#define SC_P_LVDS0_I2C0_SDA_LVDS0_I2C0_SDA SC_P_LVDS0_I2C0_SDA 0
+#define SC_P_LVDS0_I2C0_SDA_LVDS0_GPIO0_IO03 SC_P_LVDS0_I2C0_SDA 1
+#define SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 SC_P_LVDS0_I2C0_SDA 3
+#define SC_P_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL SC_P_LVDS0_I2C1_SCL 0
+#define SC_P_LVDS0_I2C1_SCL_DMA_UART2_TX SC_P_LVDS0_I2C1_SCL 1
+#define SC_P_LVDS0_I2C1_SCL_LSIO_GPIO1_IO08 SC_P_LVDS0_I2C1_SCL 3
+#define SC_P_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA SC_P_LVDS0_I2C1_SDA 0
+#define SC_P_LVDS0_I2C1_SDA_DMA_UART2_RX SC_P_LVDS0_I2C1_SDA 1
+#define SC_P_LVDS0_I2C1_SDA_LSIO_GPIO1_IO09 SC_P_LVDS0_I2C1_SDA 3
+#define SC_P_LVDS1_GPIO00_LVDS1_GPIO0_IO00 SC_P_LVDS1_GPIO00 0
+#define SC_P_LVDS1_GPIO00_LVDS1_PWM0_OUT SC_P_LVDS1_GPIO00 1
+#define SC_P_LVDS1_GPIO00_LSIO_GPIO1_IO10 SC_P_LVDS1_GPIO00 3
+#define SC_P_LVDS1_GPIO01_LVDS1_GPIO0_IO01 SC_P_LVDS1_GPIO01 0
+#define SC_P_LVDS1_GPIO01_LSIO_GPIO1_IO11 SC_P_LVDS1_GPIO01 3
+#define SC_P_LVDS1_I2C0_SCL_LVDS1_I2C0_SCL SC_P_LVDS1_I2C0_SCL 0
+#define SC_P_LVDS1_I2C0_SCL_LVDS1_GPIO0_IO02 SC_P_LVDS1_I2C0_SCL 1
+#define SC_P_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 SC_P_LVDS1_I2C0_SCL 3
+#define SC_P_LVDS1_I2C0_SDA_LVDS1_I2C0_SDA SC_P_LVDS1_I2C0_SDA 0
+#define SC_P_LVDS1_I2C0_SDA_LVDS1_GPIO0_IO03 SC_P_LVDS1_I2C0_SDA 1
+#define SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 SC_P_LVDS1_I2C0_SDA 3
+#define SC_P_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL SC_P_LVDS1_I2C1_SCL 0
+#define SC_P_LVDS1_I2C1_SCL_DMA_UART3_TX SC_P_LVDS1_I2C1_SCL 1
+#define SC_P_LVDS1_I2C1_SCL_LSIO_GPIO1_IO14 SC_P_LVDS1_I2C1_SCL 3
+#define SC_P_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA SC_P_LVDS1_I2C1_SDA 0
+#define SC_P_LVDS1_I2C1_SDA_DMA_UART3_RX SC_P_LVDS1_I2C1_SDA 1
+#define SC_P_LVDS1_I2C1_SDA_LSIO_GPIO1_IO15 SC_P_LVDS1_I2C1_SDA 3
+#define SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL SC_P_MIPI_DSI0_I2C0_SCL 0
+#define SC_P_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO16 SC_P_MIPI_DSI0_I2C0_SCL 3
+#define SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA SC_P_MIPI_DSI0_I2C0_SDA 0
+#define SC_P_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO17 SC_P_MIPI_DSI0_I2C0_SDA 3
+#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_GPIO0_IO00 SC_P_MIPI_DSI0_GPIO0_00 0
+#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT SC_P_MIPI_DSI0_GPIO0_00 1
+#define SC_P_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO18 SC_P_MIPI_DSI0_GPIO0_00 3
+#define SC_P_MIPI_DSI0_GPIO0_01_MIPI_DSI0_GPIO0_IO01 SC_P_MIPI_DSI0_GPIO0_01 0
+#define SC_P_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 SC_P_MIPI_DSI0_GPIO0_01 3
+#define SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL SC_P_MIPI_DSI1_I2C0_SCL 0
+#define SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 SC_P_MIPI_DSI1_I2C0_SCL 3
+#define SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA SC_P_MIPI_DSI1_I2C0_SDA 0
+#define SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 SC_P_MIPI_DSI1_I2C0_SDA 3
+#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_GPIO0_IO00 SC_P_MIPI_DSI1_GPIO0_00 0
+#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT SC_P_MIPI_DSI1_GPIO0_00 1
+#define SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 SC_P_MIPI_DSI1_GPIO0_00 3
+#define SC_P_MIPI_DSI1_GPIO0_01_MIPI_DSI1_GPIO0_IO01 SC_P_MIPI_DSI1_GPIO0_01 0
+#define SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 SC_P_MIPI_DSI1_GPIO0_01 3
+#define SC_P_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT SC_P_MIPI_CSI0_MCLK_OUT 0
+#define SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24 SC_P_MIPI_CSI0_MCLK_OUT 3
+#define SC_P_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL SC_P_MIPI_CSI0_I2C0_SCL 0
+#define SC_P_MIPI_CSI0_I2C0_SCL_LSIO_GPIO1_IO25 SC_P_MIPI_CSI0_I2C0_SCL 3
+#define SC_P_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA SC_P_MIPI_CSI0_I2C0_SDA 0
+#define SC_P_MIPI_CSI0_I2C0_SDA_LSIO_GPIO1_IO26 SC_P_MIPI_CSI0_I2C0_SDA 3
+#define SC_P_MIPI_CSI0_GPIO0_00_MIPI_CSI0_GPIO0_IO00 SC_P_MIPI_CSI0_GPIO0_00 0
+#define SC_P_MIPI_CSI0_GPIO0_00_DMA_I2C0_SCL SC_P_MIPI_CSI0_GPIO0_00 1
+#define SC_P_MIPI_CSI0_GPIO0_00_MIPI_CSI1_I2C0_SCL SC_P_MIPI_CSI0_GPIO0_00 2
+#define SC_P_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27 SC_P_MIPI_CSI0_GPIO0_00 3
+#define SC_P_MIPI_CSI0_GPIO0_01_MIPI_CSI0_GPIO0_IO01 SC_P_MIPI_CSI0_GPIO0_01 0
+#define SC_P_MIPI_CSI0_GPIO0_01_DMA_I2C0_SDA SC_P_MIPI_CSI0_GPIO0_01 1
+#define SC_P_MIPI_CSI0_GPIO0_01_MIPI_CSI1_I2C0_SDA SC_P_MIPI_CSI0_GPIO0_01 2
+#define SC_P_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 SC_P_MIPI_CSI0_GPIO0_01 3
+#define SC_P_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT SC_P_MIPI_CSI1_MCLK_OUT 0
+#define SC_P_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 SC_P_MIPI_CSI1_MCLK_OUT 3
+#define SC_P_MIPI_CSI1_GPIO0_00_MIPI_CSI1_GPIO0_IO00 SC_P_MIPI_CSI1_GPIO0_00 0
+#define SC_P_MIPI_CSI1_GPIO0_00_DMA_UART4_RX SC_P_MIPI_CSI1_GPIO0_00 1
+#define SC_P_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 SC_P_MIPI_CSI1_GPIO0_00 3
+#define SC_P_MIPI_CSI1_GPIO0_01_MIPI_CSI1_GPIO0_IO01 SC_P_MIPI_CSI1_GPIO0_01 0
+#define SC_P_MIPI_CSI1_GPIO0_01_DMA_UART4_TX SC_P_MIPI_CSI1_GPIO0_01 1
+#define SC_P_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31 SC_P_MIPI_CSI1_GPIO0_01 3
+#define SC_P_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL SC_P_MIPI_CSI1_I2C0_SCL 0
+#define SC_P_MIPI_CSI1_I2C0_SCL_LSIO_GPIO2_IO00 SC_P_MIPI_CSI1_I2C0_SCL 3
+#define SC_P_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA SC_P_MIPI_CSI1_I2C0_SDA 0
+#define SC_P_MIPI_CSI1_I2C0_SDA_LSIO_GPIO2_IO01 SC_P_MIPI_CSI1_I2C0_SDA 3
+#define SC_P_HDMI_TX0_TS_SCL_HDMI_TX0_I2C0_SCL SC_P_HDMI_TX0_TS_SCL 0
+#define SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL SC_P_HDMI_TX0_TS_SCL 1
+#define SC_P_HDMI_TX0_TS_SCL_LSIO_GPIO2_IO02 SC_P_HDMI_TX0_TS_SCL 3
+#define SC_P_HDMI_TX0_TS_SDA_HDMI_TX0_I2C0_SDA SC_P_HDMI_TX0_TS_SDA 0
+#define SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA SC_P_HDMI_TX0_TS_SDA 1
+#define SC_P_HDMI_TX0_TS_SDA_LSIO_GPIO2_IO03 SC_P_HDMI_TX0_TS_SDA 3
+#define SC_P_ESAI1_FSR_AUD_ESAI1_FSR SC_P_ESAI1_FSR 0
+#define SC_P_ESAI1_FSR_LSIO_GPIO2_IO04 SC_P_ESAI1_FSR 3
+#define SC_P_ESAI1_FST_AUD_ESAI1_FST SC_P_ESAI1_FST 0
+#define SC_P_ESAI1_FST_AUD_SPDIF0_EXT_CLK SC_P_ESAI1_FST 1
+#define SC_P_ESAI1_FST_LSIO_GPIO2_IO05 SC_P_ESAI1_FST 3
+#define SC_P_ESAI1_SCKR_AUD_ESAI1_SCKR SC_P_ESAI1_SCKR 0
+#define SC_P_ESAI1_SCKR_LSIO_GPIO2_IO06 SC_P_ESAI1_SCKR 3
+#define SC_P_ESAI1_SCKT_AUD_ESAI1_SCKT SC_P_ESAI1_SCKT 0
+#define SC_P_ESAI1_SCKT_AUD_SAI2_RXC SC_P_ESAI1_SCKT 1
+#define SC_P_ESAI1_SCKT_AUD_SPDIF0_EXT_CLK SC_P_ESAI1_SCKT 2
+#define SC_P_ESAI1_SCKT_LSIO_GPIO2_IO07 SC_P_ESAI1_SCKT 3
+#define SC_P_ESAI1_TX0_AUD_ESAI1_TX0 SC_P_ESAI1_TX0 0
+#define SC_P_ESAI1_TX0_AUD_SAI2_RXD SC_P_ESAI1_TX0 1
+#define SC_P_ESAI1_TX0_AUD_SPDIF0_RX SC_P_ESAI1_TX0 2
+#define SC_P_ESAI1_TX0_LSIO_GPIO2_IO08 SC_P_ESAI1_TX0 3
+#define SC_P_ESAI1_TX1_AUD_ESAI1_TX1 SC_P_ESAI1_TX1 0
+#define SC_P_ESAI1_TX1_AUD_SAI2_RXFS SC_P_ESAI1_TX1 1
+#define SC_P_ESAI1_TX1_AUD_SPDIF0_TX SC_P_ESAI1_TX1 2
+#define SC_P_ESAI1_TX1_LSIO_GPIO2_IO09 SC_P_ESAI1_TX1 3
+#define SC_P_ESAI1_TX2_RX3_AUD_ESAI1_TX2_RX3 SC_P_ESAI1_TX2_RX3 0
+#define SC_P_ESAI1_TX2_RX3_AUD_SPDIF0_RX SC_P_ESAI1_TX2_RX3 1
+#define SC_P_ESAI1_TX2_RX3_LSIO_GPIO2_IO10 SC_P_ESAI1_TX2_RX3 3
+#define SC_P_ESAI1_TX3_RX2_AUD_ESAI1_TX3_RX2 SC_P_ESAI1_TX3_RX2 0
+#define SC_P_ESAI1_TX3_RX2_AUD_SPDIF0_TX SC_P_ESAI1_TX3_RX2 1
+#define SC_P_ESAI1_TX3_RX2_LSIO_GPIO2_IO11 SC_P_ESAI1_TX3_RX2 3
+#define SC_P_ESAI1_TX4_RX1_AUD_ESAI1_TX4_RX1 SC_P_ESAI1_TX4_RX1 0
+#define SC_P_ESAI1_TX4_RX1_LSIO_GPIO2_IO12 SC_P_ESAI1_TX4_RX1 3
+#define SC_P_ESAI1_TX5_RX0_AUD_ESAI1_TX5_RX0 SC_P_ESAI1_TX5_RX0 0
+#define SC_P_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 SC_P_ESAI1_TX5_RX0 3
+#define SC_P_SPDIF0_RX_AUD_SPDIF0_RX SC_P_SPDIF0_RX 0
+#define SC_P_SPDIF0_RX_AUD_MQS_R SC_P_SPDIF0_RX 1
+#define SC_P_SPDIF0_RX_AUD_ACM_MCLK_IN1 SC_P_SPDIF0_RX 2
+#define SC_P_SPDIF0_RX_LSIO_GPIO2_IO14 SC_P_SPDIF0_RX 3
+#define SC_P_SPDIF0_TX_AUD_SPDIF0_TX SC_P_SPDIF0_TX 0
+#define SC_P_SPDIF0_TX_AUD_MQS_L SC_P_SPDIF0_TX 1
+#define SC_P_SPDIF0_TX_AUD_ACM_MCLK_OUT1 SC_P_SPDIF0_TX 2
+#define SC_P_SPDIF0_TX_LSIO_GPIO2_IO15 SC_P_SPDIF0_TX 3
+#define SC_P_SPDIF0_EXT_CLK_AUD_SPDIF0_EXT_CLK SC_P_SPDIF0_EXT_CLK 0
+#define SC_P_SPDIF0_EXT_CLK_DMA_DMA0_REQ_IN0 SC_P_SPDIF0_EXT_CLK 1
+#define SC_P_SPDIF0_EXT_CLK_LSIO_GPIO2_IO16 SC_P_SPDIF0_EXT_CLK 3
+#define SC_P_SPI3_SCK_DMA_SPI3_SCK SC_P_SPI3_SCK 0
+#define SC_P_SPI3_SCK_LSIO_GPIO2_IO17 SC_P_SPI3_SCK 3
+#define SC_P_SPI3_SDO_DMA_SPI3_SDO SC_P_SPI3_SDO 0
+#define SC_P_SPI3_SDO_DMA_FTM_CH0 SC_P_SPI3_SDO 1
+#define SC_P_SPI3_SDO_LSIO_GPIO2_IO18 SC_P_SPI3_SDO 3
+#define SC_P_SPI3_SDI_DMA_SPI3_SDI SC_P_SPI3_SDI 0
+#define SC_P_SPI3_SDI_DMA_FTM_CH1 SC_P_SPI3_SDI 1
+#define SC_P_SPI3_SDI_LSIO_GPIO2_IO19 SC_P_SPI3_SDI 3
+#define SC_P_SPI3_CS0_DMA_SPI3_CS0 SC_P_SPI3_CS0 0
+#define SC_P_SPI3_CS0_DMA_FTM_CH2 SC_P_SPI3_CS0 1
+#define SC_P_SPI3_CS0_LSIO_GPIO2_IO20 SC_P_SPI3_CS0 3
+#define SC_P_SPI3_CS1_DMA_SPI3_CS1 SC_P_SPI3_CS1 0
+#define SC_P_SPI3_CS1_LSIO_GPIO2_IO21 SC_P_SPI3_CS1 3
+#define SC_P_ESAI0_FSR_AUD_ESAI0_FSR SC_P_ESAI0_FSR 0
+#define SC_P_ESAI0_FSR_LSIO_GPIO2_IO22 SC_P_ESAI0_FSR 3
+#define SC_P_ESAI0_FST_AUD_ESAI0_FST SC_P_ESAI0_FST 0
+#define SC_P_ESAI0_FST_LSIO_GPIO2_IO23 SC_P_ESAI0_FST 3
+#define SC_P_ESAI0_SCKR_AUD_ESAI0_SCKR SC_P_ESAI0_SCKR 0
+#define SC_P_ESAI0_SCKR_LSIO_GPIO2_IO24 SC_P_ESAI0_SCKR 3
+#define SC_P_ESAI0_SCKT_AUD_ESAI0_SCKT SC_P_ESAI0_SCKT 0
+#define SC_P_ESAI0_SCKT_LSIO_GPIO2_IO25 SC_P_ESAI0_SCKT 3
+#define SC_P_ESAI0_TX0_AUD_ESAI0_TX0 SC_P_ESAI0_TX0 0
+#define SC_P_ESAI0_TX0_LSIO_GPIO2_IO26 SC_P_ESAI0_TX0 3
+#define SC_P_ESAI0_TX1_AUD_ESAI0_TX1 SC_P_ESAI0_TX1 0
+#define SC_P_ESAI0_TX1_LSIO_GPIO2_IO27 SC_P_ESAI0_TX1 3
+#define SC_P_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3 SC_P_ESAI0_TX2_RX3 0
+#define SC_P_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 SC_P_ESAI0_TX2_RX3 3
+#define SC_P_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2 SC_P_ESAI0_TX3_RX2 0
+#define SC_P_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 SC_P_ESAI0_TX3_RX2 3
+#define SC_P_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1 SC_P_ESAI0_TX4_RX1 0
+#define SC_P_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 SC_P_ESAI0_TX4_RX1 3
+#define SC_P_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0 SC_P_ESAI0_TX5_RX0 0
+#define SC_P_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 SC_P_ESAI0_TX5_RX0 3
+#define SC_P_MCLK_IN0_AUD_ACM_MCLK_IN0 SC_P_MCLK_IN0 0
+#define SC_P_MCLK_IN0_AUD_ESAI0_RX_HF_CLK SC_P_MCLK_IN0 1
+#define SC_P_MCLK_IN0_AUD_ESAI1_RX_HF_CLK SC_P_MCLK_IN0 2
+#define SC_P_MCLK_IN0_LSIO_GPIO3_IO00 SC_P_MCLK_IN0 3
+#define SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0 SC_P_MCLK_OUT0 0
+#define SC_P_MCLK_OUT0_AUD_ESAI0_TX_HF_CLK SC_P_MCLK_OUT0 1
+#define SC_P_MCLK_OUT0_AUD_ESAI1_TX_HF_CLK SC_P_MCLK_OUT0 2
+#define SC_P_MCLK_OUT0_LSIO_GPIO3_IO01 SC_P_MCLK_OUT0 3
+#define SC_P_SPI0_SCK_DMA_SPI0_SCK SC_P_SPI0_SCK 0
+#define SC_P_SPI0_SCK_AUD_SAI0_RXC SC_P_SPI0_SCK 1
+#define SC_P_SPI0_SCK_LSIO_GPIO3_IO02 SC_P_SPI0_SCK 3
+#define SC_P_SPI0_SDO_DMA_SPI0_SDO SC_P_SPI0_SDO 0
+#define SC_P_SPI0_SDO_AUD_SAI0_TXD SC_P_SPI0_SDO 1
+#define SC_P_SPI0_SDO_LSIO_GPIO3_IO03 SC_P_SPI0_SDO 3
+#define SC_P_SPI0_SDI_DMA_SPI0_SDI SC_P_SPI0_SDI 0
+#define SC_P_SPI0_SDI_AUD_SAI0_RXD SC_P_SPI0_SDI 1
+#define SC_P_SPI0_SDI_LSIO_GPIO3_IO04 SC_P_SPI0_SDI 3
+#define SC_P_SPI0_CS0_DMA_SPI0_CS0 SC_P_SPI0_CS0 0
+#define SC_P_SPI0_CS0_AUD_SAI0_RXFS SC_P_SPI0_CS0 1
+#define SC_P_SPI0_CS0_LSIO_GPIO3_IO05 SC_P_SPI0_CS0 3
+#define SC_P_SPI0_CS1_DMA_SPI0_CS1 SC_P_SPI0_CS1 0
+#define SC_P_SPI0_CS1_AUD_SAI0_TXC SC_P_SPI0_CS1 1
+#define SC_P_SPI0_CS1_LSIO_GPIO3_IO06 SC_P_SPI0_CS1 3
+#define SC_P_SPI2_SCK_DMA_SPI2_SCK SC_P_SPI2_SCK 0
+#define SC_P_SPI2_SCK_LSIO_GPIO3_IO07 SC_P_SPI2_SCK 3
+#define SC_P_SPI2_SDO_DMA_SPI2_SDO SC_P_SPI2_SDO 0
+#define SC_P_SPI2_SDO_LSIO_GPIO3_IO08 SC_P_SPI2_SDO 3
+#define SC_P_SPI2_SDI_DMA_SPI2_SDI SC_P_SPI2_SDI 0
+#define SC_P_SPI2_SDI_LSIO_GPIO3_IO09 SC_P_SPI2_SDI 3
+#define SC_P_SPI2_CS0_DMA_SPI2_CS0 SC_P_SPI2_CS0 0
+#define SC_P_SPI2_CS0_LSIO_GPIO3_IO10 SC_P_SPI2_CS0 3
+#define SC_P_SPI2_CS1_DMA_SPI2_CS1 SC_P_SPI2_CS1 0
+#define SC_P_SPI2_CS1_AUD_SAI0_TXFS SC_P_SPI2_CS1 1
+#define SC_P_SPI2_CS1_LSIO_GPIO3_IO11 SC_P_SPI2_CS1 3
+#define SC_P_SAI1_RXC_AUD_SAI1_RXC SC_P_SAI1_RXC 0
+#define SC_P_SAI1_RXC_AUD_SAI0_TXD SC_P_SAI1_RXC 1
+#define SC_P_SAI1_RXC_LSIO_GPIO3_IO12 SC_P_SAI1_RXC 3
+#define SC_P_SAI1_RXD_AUD_SAI1_RXD SC_P_SAI1_RXD 0
+#define SC_P_SAI1_RXD_AUD_SAI0_TXFS SC_P_SAI1_RXD 1
+#define SC_P_SAI1_RXD_LSIO_GPIO3_IO13 SC_P_SAI1_RXD 3
+#define SC_P_SAI1_RXFS_AUD_SAI1_RXFS SC_P_SAI1_RXFS 0
+#define SC_P_SAI1_RXFS_AUD_SAI0_RXD SC_P_SAI1_RXFS 1
+#define SC_P_SAI1_RXFS_LSIO_GPIO3_IO14 SC_P_SAI1_RXFS 3
+#define SC_P_SAI1_TXC_AUD_SAI1_TXC SC_P_SAI1_TXC 0
+#define SC_P_SAI1_TXC_AUD_SAI0_TXC SC_P_SAI1_TXC 1
+#define SC_P_SAI1_TXC_LSIO_GPIO3_IO15 SC_P_SAI1_TXC 3
+#define SC_P_SAI1_TXD_AUD_SAI1_TXD SC_P_SAI1_TXD 0
+#define SC_P_SAI1_TXD_AUD_SAI1_RXC SC_P_SAI1_TXD 1
+#define SC_P_SAI1_TXD_LSIO_GPIO3_IO16 SC_P_SAI1_TXD 3
+#define SC_P_SAI1_TXFS_AUD_SAI1_TXFS SC_P_SAI1_TXFS 0
+#define SC_P_SAI1_TXFS_AUD_SAI1_RXFS SC_P_SAI1_TXFS 1
+#define SC_P_SAI1_TXFS_LSIO_GPIO3_IO17 SC_P_SAI1_TXFS 3
+#define SC_P_ADC_IN7_DMA_ADC1_IN3 SC_P_ADC_IN7 0
+#define SC_P_ADC_IN7_DMA_SPI1_CS1 SC_P_ADC_IN7 1
+#define SC_P_ADC_IN7_LSIO_KPP0_ROW3 SC_P_ADC_IN7 2
+#define SC_P_ADC_IN7_LSIO_GPIO3_IO25 SC_P_ADC_IN7 3
+#define SC_P_ADC_IN6_DMA_ADC1_IN2 SC_P_ADC_IN6 0
+#define SC_P_ADC_IN6_DMA_SPI1_CS0 SC_P_ADC_IN6 1
+#define SC_P_ADC_IN6_LSIO_KPP0_ROW2 SC_P_ADC_IN6 2
+#define SC_P_ADC_IN6_LSIO_GPIO3_IO24 SC_P_ADC_IN6 3
+#define SC_P_ADC_IN5_DMA_ADC1_IN1 SC_P_ADC_IN5 0
+#define SC_P_ADC_IN5_DMA_SPI1_SDI SC_P_ADC_IN5 1
+#define SC_P_ADC_IN5_LSIO_KPP0_ROW1 SC_P_ADC_IN5 2
+#define SC_P_ADC_IN5_LSIO_GPIO3_IO23 SC_P_ADC_IN5 3
+#define SC_P_ADC_IN4_DMA_ADC1_IN0 SC_P_ADC_IN4 0
+#define SC_P_ADC_IN4_DMA_SPI1_SDO SC_P_ADC_IN4 1
+#define SC_P_ADC_IN4_LSIO_KPP0_ROW0 SC_P_ADC_IN4 2
+#define SC_P_ADC_IN4_LSIO_GPIO3_IO22 SC_P_ADC_IN4 3
+#define SC_P_ADC_IN3_DMA_ADC0_IN3 SC_P_ADC_IN3 0
+#define SC_P_ADC_IN3_DMA_SPI1_SCK SC_P_ADC_IN3 1
+#define SC_P_ADC_IN3_LSIO_KPP0_COL3 SC_P_ADC_IN3 2
+#define SC_P_ADC_IN3_LSIO_GPIO3_IO21 SC_P_ADC_IN3 3
+#define SC_P_ADC_IN2_DMA_ADC0_IN2 SC_P_ADC_IN2 0
+#define SC_P_ADC_IN2_LSIO_KPP0_COL2 SC_P_ADC_IN2 2
+#define SC_P_ADC_IN2_LSIO_GPIO3_IO20 SC_P_ADC_IN2 3
+#define SC_P_ADC_IN1_DMA_ADC0_IN1 SC_P_ADC_IN1 0
+#define SC_P_ADC_IN1_LSIO_KPP0_COL1 SC_P_ADC_IN1 2
+#define SC_P_ADC_IN1_LSIO_GPIO3_IO19 SC_P_ADC_IN1 3
+#define SC_P_ADC_IN0_DMA_ADC0_IN0 SC_P_ADC_IN0 0
+#define SC_P_ADC_IN0_LSIO_KPP0_COL0 SC_P_ADC_IN0 2
+#define SC_P_ADC_IN0_LSIO_GPIO3_IO18 SC_P_ADC_IN0 3
+#define SC_P_MLB_SIG_CONN_MLB_SIG SC_P_MLB_SIG 0
+#define SC_P_MLB_SIG_AUD_SAI3_RXC SC_P_MLB_SIG 1
+#define SC_P_MLB_SIG_LSIO_GPIO3_IO26 SC_P_MLB_SIG 3
+#define SC_P_MLB_CLK_CONN_MLB_CLK SC_P_MLB_CLK 0
+#define SC_P_MLB_CLK_AUD_SAI3_RXFS SC_P_MLB_CLK 1
+#define SC_P_MLB_CLK_LSIO_GPIO3_IO27 SC_P_MLB_CLK 3
+#define SC_P_MLB_DATA_CONN_MLB_DATA SC_P_MLB_DATA 0
+#define SC_P_MLB_DATA_AUD_SAI3_RXD SC_P_MLB_DATA 1
+#define SC_P_MLB_DATA_LSIO_GPIO3_IO28 SC_P_MLB_DATA 3
+#define SC_P_FLEXCAN0_RX_DMA_FLEXCAN0_RX SC_P_FLEXCAN0_RX 0
+#define SC_P_FLEXCAN0_RX_LSIO_GPIO3_IO29 SC_P_FLEXCAN0_RX 3
+#define SC_P_FLEXCAN0_TX_DMA_FLEXCAN0_TX SC_P_FLEXCAN0_TX 0
+#define SC_P_FLEXCAN0_TX_LSIO_GPIO3_IO30 SC_P_FLEXCAN0_TX 3
+#define SC_P_FLEXCAN1_RX_DMA_FLEXCAN1_RX SC_P_FLEXCAN1_RX 0
+#define SC_P_FLEXCAN1_RX_LSIO_GPIO3_IO31 SC_P_FLEXCAN1_RX 3
+#define SC_P_FLEXCAN1_TX_DMA_FLEXCAN1_TX SC_P_FLEXCAN1_TX 0
+#define SC_P_FLEXCAN1_TX_LSIO_GPIO4_IO00 SC_P_FLEXCAN1_TX 3
+#define SC_P_FLEXCAN2_RX_DMA_FLEXCAN2_RX SC_P_FLEXCAN2_RX 0
+#define SC_P_FLEXCAN2_RX_LSIO_GPIO4_IO01 SC_P_FLEXCAN2_RX 3
+#define SC_P_FLEXCAN2_TX_DMA_FLEXCAN2_TX SC_P_FLEXCAN2_TX 0
+#define SC_P_FLEXCAN2_TX_LSIO_GPIO4_IO02 SC_P_FLEXCAN2_TX 3
+#define SC_P_USB_SS3_TC0_DMA_I2C1_SCL SC_P_USB_SS3_TC0 0
+#define SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR SC_P_USB_SS3_TC0 1
+#define SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 SC_P_USB_SS3_TC0 3
+#define SC_P_USB_SS3_TC1_DMA_I2C1_SCL SC_P_USB_SS3_TC1 0
+#define SC_P_USB_SS3_TC1_CONN_USB_OTG2_PWR SC_P_USB_SS3_TC1 1
+#define SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 SC_P_USB_SS3_TC1 3
+#define SC_P_USB_SS3_TC2_DMA_I2C1_SDA SC_P_USB_SS3_TC2 0
+#define SC_P_USB_SS3_TC2_CONN_USB_OTG1_OC SC_P_USB_SS3_TC2 1
+#define SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 SC_P_USB_SS3_TC2 3
+#define SC_P_USB_SS3_TC3_DMA_I2C1_SDA SC_P_USB_SS3_TC3 0
+#define SC_P_USB_SS3_TC3_CONN_USB_OTG2_OC SC_P_USB_SS3_TC3 1
+#define SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 SC_P_USB_SS3_TC3 3
+#define SC_P_USDHC1_RESET_B_CONN_USDHC1_RESET_B SC_P_USDHC1_RESET_B 0
+#define SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 SC_P_USDHC1_RESET_B 3
+#define SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT SC_P_USDHC1_VSELECT 0
+#define SC_P_USDHC1_VSELECT_LSIO_GPIO4_IO08 SC_P_USDHC1_VSELECT 3
+#define SC_P_USDHC2_RESET_B_CONN_USDHC2_RESET_B SC_P_USDHC2_RESET_B 0
+#define SC_P_USDHC2_RESET_B_LSIO_GPIO4_IO09 SC_P_USDHC2_RESET_B 3
+#define SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT SC_P_USDHC2_VSELECT 0
+#define SC_P_USDHC2_VSELECT_LSIO_GPIO4_IO10 SC_P_USDHC2_VSELECT 3
+#define SC_P_USDHC2_WP_CONN_USDHC2_WP SC_P_USDHC2_WP 0
+#define SC_P_USDHC2_WP_LSIO_GPIO4_IO11 SC_P_USDHC2_WP 3
+#define SC_P_USDHC2_CD_B_CONN_USDHC2_CD_B SC_P_USDHC2_CD_B 0
+#define SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 SC_P_USDHC2_CD_B 3
+#define SC_P_ENET0_MDIO_CONN_ENET0_MDIO SC_P_ENET0_MDIO 0
+#define SC_P_ENET0_MDIO_DMA_I2C4_SDA SC_P_ENET0_MDIO 1
+#define SC_P_ENET0_MDIO_LSIO_GPIO4_IO13 SC_P_ENET0_MDIO 3
+#define SC_P_ENET0_MDC_CONN_ENET0_MDC SC_P_ENET0_MDC 0
+#define SC_P_ENET0_MDC_DMA_I2C4_SCL SC_P_ENET0_MDC 1
+#define SC_P_ENET0_MDC_LSIO_GPIO4_IO14 SC_P_ENET0_MDC 3
+#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M SC_P_ENET0_REFCLK_125M_25M 0
+#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_PPS SC_P_ENET0_REFCLK_125M_25M 1
+#define SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 SC_P_ENET0_REFCLK_125M_25M 3
+#define SC_P_ENET1_REFCLK_125M_25M_CONN_ENET1_REFCLK_125M_25M SC_P_ENET1_REFCLK_125M_25M 0
+#define SC_P_ENET1_REFCLK_125M_25M_CONN_ENET1_PPS SC_P_ENET1_REFCLK_125M_25M 1
+#define SC_P_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 SC_P_ENET1_REFCLK_125M_25M 3
+#define SC_P_ENET1_MDIO_CONN_ENET1_MDIO SC_P_ENET1_MDIO 0
+#define SC_P_ENET1_MDIO_DMA_I2C4_SDA SC_P_ENET1_MDIO 1
+#define SC_P_ENET1_MDIO_LSIO_GPIO4_IO17 SC_P_ENET1_MDIO 3
+#define SC_P_ENET1_MDC_CONN_ENET1_MDC SC_P_ENET1_MDC 0
+#define SC_P_ENET1_MDC_DMA_I2C4_SCL SC_P_ENET1_MDC 1
+#define SC_P_ENET1_MDC_LSIO_GPIO4_IO18 SC_P_ENET1_MDC 3
+#define SC_P_QSPI1A_SS0_B_LSIO_QSPI1A_SS0_B SC_P_QSPI1A_SS0_B 0
+#define SC_P_QSPI1A_SS0_B_LSIO_GPIO4_IO19 SC_P_QSPI1A_SS0_B 3
+#define SC_P_QSPI1A_SS1_B_LSIO_QSPI1A_SS1_B SC_P_QSPI1A_SS1_B 0
+#define SC_P_QSPI1A_SS1_B_LSIO_QSPI1A_SCLK2 SC_P_QSPI1A_SS1_B 1
+#define SC_P_QSPI1A_SS1_B_LSIO_GPIO4_IO20 SC_P_QSPI1A_SS1_B 3
+#define SC_P_QSPI1A_SCLK_LSIO_QSPI1A_SCLK SC_P_QSPI1A_SCLK 0
+#define SC_P_QSPI1A_SCLK_LSIO_GPIO4_IO21 SC_P_QSPI1A_SCLK 3
+#define SC_P_QSPI1A_DQS_LSIO_QSPI1A_DQS SC_P_QSPI1A_DQS 0
+#define SC_P_QSPI1A_DQS_LSIO_GPIO4_IO22 SC_P_QSPI1A_DQS 3
+#define SC_P_QSPI1A_DATA3_LSIO_QSPI1A_DATA3 SC_P_QSPI1A_DATA3 0
+#define SC_P_QSPI1A_DATA3_DMA_I2C1_SDA SC_P_QSPI1A_DATA3 1
+#define SC_P_QSPI1A_DATA3_CONN_USB_OTG1_OC SC_P_QSPI1A_DATA3 2
+#define SC_P_QSPI1A_DATA3_LSIO_GPIO4_IO23 SC_P_QSPI1A_DATA3 3
+#define SC_P_QSPI1A_DATA2_LSIO_QSPI1A_DATA2 SC_P_QSPI1A_DATA2 0
+#define SC_P_QSPI1A_DATA2_DMA_I2C1_SCL SC_P_QSPI1A_DATA2 1
+#define SC_P_QSPI1A_DATA2_CONN_USB_OTG2_PWR SC_P_QSPI1A_DATA2 2
+#define SC_P_QSPI1A_DATA2_LSIO_GPIO4_IO24 SC_P_QSPI1A_DATA2 3
+#define SC_P_QSPI1A_DATA1_LSIO_QSPI1A_DATA1 SC_P_QSPI1A_DATA1 0
+#define SC_P_QSPI1A_DATA1_DMA_I2C1_SDA SC_P_QSPI1A_DATA1 1
+#define SC_P_QSPI1A_DATA1_CONN_USB_OTG2_OC SC_P_QSPI1A_DATA1 2
+#define SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 SC_P_QSPI1A_DATA1 3
+#define SC_P_QSPI1A_DATA0_LSIO_QSPI1A_DATA0 SC_P_QSPI1A_DATA0 0
+#define SC_P_QSPI1A_DATA0_LSIO_GPIO4_IO26 SC_P_QSPI1A_DATA0 3
+#define SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 SC_P_QSPI0A_DATA0 0
+#define SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 SC_P_QSPI0A_DATA1 0
+#define SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 SC_P_QSPI0A_DATA2 0
+#define SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 SC_P_QSPI0A_DATA3 0
+#define SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS SC_P_QSPI0A_DQS 0
+#define SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B SC_P_QSPI0A_SS0_B 0
+#define SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B SC_P_QSPI0A_SS1_B 0
+#define SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SCLK2 SC_P_QSPI0A_SS1_B 1
+#define SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK SC_P_QSPI0A_SCLK 0
+#define SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK SC_P_QSPI0B_SCLK 0
+#define SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 SC_P_QSPI0B_DATA0 0
+#define SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 SC_P_QSPI0B_DATA1 0
+#define SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 SC_P_QSPI0B_DATA2 0
+#define SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 SC_P_QSPI0B_DATA3 0
+#define SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS SC_P_QSPI0B_DQS 0
+#define SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B SC_P_QSPI0B_SS0_B 0
+#define SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B SC_P_QSPI0B_SS1_B 0
+#define SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SCLK2 SC_P_QSPI0B_SS1_B 1
+#define SC_P_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B SC_P_PCIE_CTRL0_CLKREQ_B 0
+#define SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 SC_P_PCIE_CTRL0_CLKREQ_B 3
+#define SC_P_PCIE_CTRL0_WAKE_B_HSIO_PCIE0_WAKE_B SC_P_PCIE_CTRL0_WAKE_B 0
+#define SC_P_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 SC_P_PCIE_CTRL0_WAKE_B 3
+#define SC_P_PCIE_CTRL0_PERST_B_HSIO_PCIE0_PERST_B SC_P_PCIE_CTRL0_PERST_B 0
+#define SC_P_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29 SC_P_PCIE_CTRL0_PERST_B 3
+#define SC_P_PCIE_CTRL1_CLKREQ_B_HSIO_PCIE1_CLKREQ_B SC_P_PCIE_CTRL1_CLKREQ_B 0
+#define SC_P_PCIE_CTRL1_CLKREQ_B_DMA_I2C1_SDA SC_P_PCIE_CTRL1_CLKREQ_B 1
+#define SC_P_PCIE_CTRL1_CLKREQ_B_CONN_USB_OTG2_OC SC_P_PCIE_CTRL1_CLKREQ_B 2
+#define SC_P_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30 SC_P_PCIE_CTRL1_CLKREQ_B 3
+#define SC_P_PCIE_CTRL1_WAKE_B_HSIO_PCIE1_WAKE_B SC_P_PCIE_CTRL1_WAKE_B 0
+#define SC_P_PCIE_CTRL1_WAKE_B_DMA_I2C1_SCL SC_P_PCIE_CTRL1_WAKE_B 1
+#define SC_P_PCIE_CTRL1_WAKE_B_CONN_USB_OTG2_PWR SC_P_PCIE_CTRL1_WAKE_B 2
+#define SC_P_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31 SC_P_PCIE_CTRL1_WAKE_B 3
+#define SC_P_PCIE_CTRL1_PERST_B_HSIO_PCIE1_PERST_B SC_P_PCIE_CTRL1_PERST_B 0
+#define SC_P_PCIE_CTRL1_PERST_B_DMA_I2C1_SCL SC_P_PCIE_CTRL1_PERST_B 1
+#define SC_P_PCIE_CTRL1_PERST_B_CONN_USB_OTG1_PWR SC_P_PCIE_CTRL1_PERST_B 2
+#define SC_P_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00 SC_P_PCIE_CTRL1_PERST_B 3
+#define SC_P_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA SC_P_USB_HSIC0_DATA 0
+#define SC_P_USB_HSIC0_DATA_DMA_I2C1_SDA SC_P_USB_HSIC0_DATA 1
+#define SC_P_USB_HSIC0_DATA_LSIO_GPIO5_IO01 SC_P_USB_HSIC0_DATA 3
+#define SC_P_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE SC_P_USB_HSIC0_STROBE 0
+#define SC_P_USB_HSIC0_STROBE_DMA_I2C1_SCL SC_P_USB_HSIC0_STROBE 1
+#define SC_P_USB_HSIC0_STROBE_LSIO_GPIO5_IO02 SC_P_USB_HSIC0_STROBE 3
+#define SC_P_EMMC0_CLK_CONN_EMMC0_CLK SC_P_EMMC0_CLK 0
+#define SC_P_EMMC0_CLK_CONN_NAND_READY_B SC_P_EMMC0_CLK 1
+#define SC_P_EMMC0_CMD_CONN_EMMC0_CMD SC_P_EMMC0_CMD 0
+#define SC_P_EMMC0_CMD_CONN_NAND_DQS SC_P_EMMC0_CMD 1
+#define SC_P_EMMC0_CMD_AUD_MQS_R SC_P_EMMC0_CMD 2
+#define SC_P_EMMC0_CMD_LSIO_GPIO5_IO03 SC_P_EMMC0_CMD 3
+#define SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 SC_P_EMMC0_DATA0 0
+#define SC_P_EMMC0_DATA0_CONN_NAND_DATA00 SC_P_EMMC0_DATA0 1
+#define SC_P_EMMC0_DATA0_LSIO_GPIO5_IO04 SC_P_EMMC0_DATA0 3
+#define SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 SC_P_EMMC0_DATA1 0
+#define SC_P_EMMC0_DATA1_CONN_NAND_DATA01 SC_P_EMMC0_DATA1 1
+#define SC_P_EMMC0_DATA1_LSIO_GPIO5_IO05 SC_P_EMMC0_DATA1 3
+#define SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 SC_P_EMMC0_DATA2 0
+#define SC_P_EMMC0_DATA2_CONN_NAND_DATA02 SC_P_EMMC0_DATA2 1
+#define SC_P_EMMC0_DATA2_LSIO_GPIO5_IO06 SC_P_EMMC0_DATA2 3
+#define SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 SC_P_EMMC0_DATA3 0
+#define SC_P_EMMC0_DATA3_CONN_NAND_DATA03 SC_P_EMMC0_DATA3 1
+#define SC_P_EMMC0_DATA3_LSIO_GPIO5_IO07 SC_P_EMMC0_DATA3 3
+#define SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 SC_P_EMMC0_DATA4 0
+#define SC_P_EMMC0_DATA4_CONN_NAND_DATA04 SC_P_EMMC0_DATA4 1
+#define SC_P_EMMC0_DATA4_LSIO_GPIO5_IO08 SC_P_EMMC0_DATA4 3
+#define SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 SC_P_EMMC0_DATA5 0
+#define SC_P_EMMC0_DATA5_CONN_NAND_DATA05 SC_P_EMMC0_DATA5 1
+#define SC_P_EMMC0_DATA5_LSIO_GPIO5_IO09 SC_P_EMMC0_DATA5 3
+#define SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 SC_P_EMMC0_DATA6 0
+#define SC_P_EMMC0_DATA6_CONN_NAND_DATA06 SC_P_EMMC0_DATA6 1
+#define SC_P_EMMC0_DATA6_LSIO_GPIO5_IO10 SC_P_EMMC0_DATA6 3
+#define SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 SC_P_EMMC0_DATA7 0
+#define SC_P_EMMC0_DATA7_CONN_NAND_DATA07 SC_P_EMMC0_DATA7 1
+#define SC_P_EMMC0_DATA7_LSIO_GPIO5_IO11 SC_P_EMMC0_DATA7 3
+#define SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE SC_P_EMMC0_STROBE 0
+#define SC_P_EMMC0_STROBE_CONN_NAND_CLE SC_P_EMMC0_STROBE 1
+#define SC_P_EMMC0_STROBE_LSIO_GPIO5_IO12 SC_P_EMMC0_STROBE 3
+#define SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B SC_P_EMMC0_RESET_B 0
+#define SC_P_EMMC0_RESET_B_CONN_NAND_WP_B SC_P_EMMC0_RESET_B 1
+#define SC_P_EMMC0_RESET_B_CONN_USDHC1_VSELECT SC_P_EMMC0_RESET_B 2
+#define SC_P_EMMC0_RESET_B_LSIO_GPIO5_IO13 SC_P_EMMC0_RESET_B 3
+#define SC_P_USDHC1_CLK_CONN_USDHC1_CLK SC_P_USDHC1_CLK 0
+#define SC_P_USDHC1_CLK_AUD_MQS_R SC_P_USDHC1_CLK 1
+#define SC_P_USDHC1_CMD_CONN_USDHC1_CMD SC_P_USDHC1_CMD 0
+#define SC_P_USDHC1_CMD_AUD_MQS_L SC_P_USDHC1_CMD 1
+#define SC_P_USDHC1_CMD_LSIO_GPIO5_IO14 SC_P_USDHC1_CMD 3
+#define SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 SC_P_USDHC1_DATA0 0
+#define SC_P_USDHC1_DATA0_CONN_NAND_RE_N SC_P_USDHC1_DATA0 1
+#define SC_P_USDHC1_DATA0_LSIO_GPIO5_IO15 SC_P_USDHC1_DATA0 3
+#define SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 SC_P_USDHC1_DATA1 0
+#define SC_P_USDHC1_DATA1_CONN_NAND_RE_P SC_P_USDHC1_DATA1 1
+#define SC_P_USDHC1_DATA1_LSIO_GPIO5_IO16 SC_P_USDHC1_DATA1 3
+#define SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 SC_P_USDHC1_DATA2 0
+#define SC_P_USDHC1_DATA2_CONN_NAND_DQS_N SC_P_USDHC1_DATA2 1
+#define SC_P_USDHC1_DATA2_LSIO_GPIO5_IO17 SC_P_USDHC1_DATA2 3
+#define SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 SC_P_USDHC1_DATA3 0
+#define SC_P_USDHC1_DATA3_CONN_NAND_DQS_P SC_P_USDHC1_DATA3 1
+#define SC_P_USDHC1_DATA3_LSIO_GPIO5_IO18 SC_P_USDHC1_DATA3 3
+#define SC_P_USDHC1_DATA4_CONN_USDHC1_DATA4 SC_P_USDHC1_DATA4 0
+#define SC_P_USDHC1_DATA4_CONN_NAND_CE0_B SC_P_USDHC1_DATA4 1
+#define SC_P_USDHC1_DATA4_AUD_MQS_R SC_P_USDHC1_DATA4 2
+#define SC_P_USDHC1_DATA4_LSIO_GPIO5_IO19 SC_P_USDHC1_DATA4 3
+#define SC_P_USDHC1_DATA5_CONN_USDHC1_DATA5 SC_P_USDHC1_DATA5 0
+#define SC_P_USDHC1_DATA5_CONN_NAND_RE_B SC_P_USDHC1_DATA5 1
+#define SC_P_USDHC1_DATA5_AUD_MQS_L SC_P_USDHC1_DATA5 2
+#define SC_P_USDHC1_DATA5_LSIO_GPIO5_IO20 SC_P_USDHC1_DATA5 3
+#define SC_P_USDHC1_DATA6_CONN_USDHC1_DATA6 SC_P_USDHC1_DATA6 0
+#define SC_P_USDHC1_DATA6_CONN_NAND_WE_B SC_P_USDHC1_DATA6 1
+#define SC_P_USDHC1_DATA6_CONN_USDHC1_WP SC_P_USDHC1_DATA6 2
+#define SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 SC_P_USDHC1_DATA6 3
+#define SC_P_USDHC1_DATA7_CONN_USDHC1_DATA7 SC_P_USDHC1_DATA7 0
+#define SC_P_USDHC1_DATA7_CONN_NAND_ALE SC_P_USDHC1_DATA7 1
+#define SC_P_USDHC1_DATA7_CONN_USDHC1_CD_B SC_P_USDHC1_DATA7 2
+#define SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 SC_P_USDHC1_DATA7 3
+#define SC_P_USDHC1_STROBE_CONN_USDHC1_STROBE SC_P_USDHC1_STROBE 0
+#define SC_P_USDHC1_STROBE_CONN_NAND_CE1_B SC_P_USDHC1_STROBE 1
+#define SC_P_USDHC1_STROBE_CONN_USDHC1_RESET_B SC_P_USDHC1_STROBE 2
+#define SC_P_USDHC1_STROBE_LSIO_GPIO5_IO23 SC_P_USDHC1_STROBE 3
+#define SC_P_USDHC2_CLK_CONN_USDHC2_CLK SC_P_USDHC2_CLK 0
+#define SC_P_USDHC2_CLK_AUD_MQS_R SC_P_USDHC2_CLK 1
+#define SC_P_USDHC2_CLK_LSIO_GPIO5_IO24 SC_P_USDHC2_CLK 3
+#define SC_P_USDHC2_CMD_CONN_USDHC2_CMD SC_P_USDHC2_CMD 0
+#define SC_P_USDHC2_CMD_AUD_MQS_L SC_P_USDHC2_CMD 1
+#define SC_P_USDHC2_CMD_LSIO_GPIO5_IO25 SC_P_USDHC2_CMD 3
+#define SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 SC_P_USDHC2_DATA0 0
+#define SC_P_USDHC2_DATA0_DMA_UART4_RX SC_P_USDHC2_DATA0 1
+#define SC_P_USDHC2_DATA0_LSIO_GPIO5_IO26 SC_P_USDHC2_DATA0 3
+#define SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 SC_P_USDHC2_DATA1 0
+#define SC_P_USDHC2_DATA1_DMA_UART4_TX SC_P_USDHC2_DATA1 1
+#define SC_P_USDHC2_DATA1_LSIO_GPIO5_IO27 SC_P_USDHC2_DATA1 3
+#define SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 SC_P_USDHC2_DATA2 0
+#define SC_P_USDHC2_DATA2_DMA_UART4_CTS_B SC_P_USDHC2_DATA2 1
+#define SC_P_USDHC2_DATA2_LSIO_GPIO5_IO28 SC_P_USDHC2_DATA2 3
+#define SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 SC_P_USDHC2_DATA3 0
+#define SC_P_USDHC2_DATA3_DMA_UART4_RTS_B SC_P_USDHC2_DATA3 1
+#define SC_P_USDHC2_DATA3_LSIO_GPIO5_IO29 SC_P_USDHC2_DATA3 3
+#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC SC_P_ENET0_RGMII_TXC 0
+#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT SC_P_ENET0_RGMII_TXC 1
+#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_IN SC_P_ENET0_RGMII_TXC 2
+#define SC_P_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 SC_P_ENET0_RGMII_TXC 3
+#define SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL SC_P_ENET0_RGMII_TX_CTL 0
+#define SC_P_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 SC_P_ENET0_RGMII_TX_CTL 3
+#define SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 SC_P_ENET0_RGMII_TXD0 0
+#define SC_P_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 SC_P_ENET0_RGMII_TXD0 3
+#define SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 SC_P_ENET0_RGMII_TXD1 0
+#define SC_P_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 SC_P_ENET0_RGMII_TXD1 3
+#define SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 SC_P_ENET0_RGMII_TXD2 0
+#define SC_P_ENET0_RGMII_TXD2_DMA_UART3_TX SC_P_ENET0_RGMII_TXD2 1
+#define SC_P_ENET0_RGMII_TXD2_VPU_TSI_S1_VID SC_P_ENET0_RGMII_TXD2 2
+#define SC_P_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 SC_P_ENET0_RGMII_TXD2 3
+#define SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 SC_P_ENET0_RGMII_TXD3 0
+#define SC_P_ENET0_RGMII_TXD3_DMA_UART3_RTS_B SC_P_ENET0_RGMII_TXD3 1
+#define SC_P_ENET0_RGMII_TXD3_VPU_TSI_S1_SYNC SC_P_ENET0_RGMII_TXD3 2
+#define SC_P_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 SC_P_ENET0_RGMII_TXD3 3
+#define SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC SC_P_ENET0_RGMII_RXC 0
+#define SC_P_ENET0_RGMII_RXC_DMA_UART3_CTS_B SC_P_ENET0_RGMII_RXC 1
+#define SC_P_ENET0_RGMII_RXC_VPU_TSI_S1_DATA SC_P_ENET0_RGMII_RXC 2
+#define SC_P_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 SC_P_ENET0_RGMII_RXC 3
+#define SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL SC_P_ENET0_RGMII_RX_CTL 0
+#define SC_P_ENET0_RGMII_RX_CTL_VPU_TSI_S0_VID SC_P_ENET0_RGMII_RX_CTL 2
+#define SC_P_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 SC_P_ENET0_RGMII_RX_CTL 3
+#define SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 SC_P_ENET0_RGMII_RXD0 0
+#define SC_P_ENET0_RGMII_RXD0_VPU_TSI_S0_SYNC SC_P_ENET0_RGMII_RXD0 2
+#define SC_P_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 SC_P_ENET0_RGMII_RXD0 3
+#define SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 SC_P_ENET0_RGMII_RXD1 0
+#define SC_P_ENET0_RGMII_RXD1_VPU_TSI_S0_DATA SC_P_ENET0_RGMII_RXD1 2
+#define SC_P_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 SC_P_ENET0_RGMII_RXD1 3
+#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 SC_P_ENET0_RGMII_RXD2 0
+#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER SC_P_ENET0_RGMII_RXD2 1
+#define SC_P_ENET0_RGMII_RXD2_VPU_TSI_S0_CLK SC_P_ENET0_RGMII_RXD2 2
+#define SC_P_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 SC_P_ENET0_RGMII_RXD2 3
+#define SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 SC_P_ENET0_RGMII_RXD3 0
+#define SC_P_ENET0_RGMII_RXD3_DMA_UART3_RX SC_P_ENET0_RGMII_RXD3 1
+#define SC_P_ENET0_RGMII_RXD3_VPU_TSI_S1_CLK SC_P_ENET0_RGMII_RXD3 2
+#define SC_P_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 SC_P_ENET0_RGMII_RXD3 3
+#define SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC SC_P_ENET1_RGMII_TXC 0
+#define SC_P_ENET1_RGMII_TXC_CONN_ENET1_RCLK50M_OUT SC_P_ENET1_RGMII_TXC 1
+#define SC_P_ENET1_RGMII_TXC_CONN_ENET1_RCLK50M_IN SC_P_ENET1_RGMII_TXC 2
+#define SC_P_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 SC_P_ENET1_RGMII_TXC 3
+#define SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL SC_P_ENET1_RGMII_TX_CTL 0
+#define SC_P_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 SC_P_ENET1_RGMII_TX_CTL 3
+#define SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 SC_P_ENET1_RGMII_TXD0 0
+#define SC_P_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 SC_P_ENET1_RGMII_TXD0 3
+#define SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 SC_P_ENET1_RGMII_TXD1 0
+#define SC_P_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 SC_P_ENET1_RGMII_TXD1 3
+#define SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 SC_P_ENET1_RGMII_TXD2 0
+#define SC_P_ENET1_RGMII_TXD2_DMA_UART3_TX SC_P_ENET1_RGMII_TXD2 1
+#define SC_P_ENET1_RGMII_TXD2_VPU_TSI_S1_VID SC_P_ENET1_RGMII_TXD2 2
+#define SC_P_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 SC_P_ENET1_RGMII_TXD2 3
+#define SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 SC_P_ENET1_RGMII_TXD3 0
+#define SC_P_ENET1_RGMII_TXD3_DMA_UART3_RTS_B SC_P_ENET1_RGMII_TXD3 1
+#define SC_P_ENET1_RGMII_TXD3_VPU_TSI_S1_SYNC SC_P_ENET1_RGMII_TXD3 2
+#define SC_P_ENET1_RGMII_TXD3_LSIO_GPIO6_IO15 SC_P_ENET1_RGMII_TXD3 3
+#define SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC SC_P_ENET1_RGMII_RXC 0
+#define SC_P_ENET1_RGMII_RXC_DMA_UART3_CTS_B SC_P_ENET1_RGMII_RXC 1
+#define SC_P_ENET1_RGMII_RXC_VPU_TSI_S1_DATA SC_P_ENET1_RGMII_RXC 2
+#define SC_P_ENET1_RGMII_RXC_LSIO_GPIO6_IO16 SC_P_ENET1_RGMII_RXC 3
+#define SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL SC_P_ENET1_RGMII_RX_CTL 0
+#define SC_P_ENET1_RGMII_RX_CTL_VPU_TSI_S0_VID SC_P_ENET1_RGMII_RX_CTL 2
+#define SC_P_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 SC_P_ENET1_RGMII_RX_CTL 3
+#define SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 SC_P_ENET1_RGMII_RXD0 0
+#define SC_P_ENET1_RGMII_RXD0_VPU_TSI_S0_SYNC SC_P_ENET1_RGMII_RXD0 2
+#define SC_P_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 SC_P_ENET1_RGMII_RXD0 3
+#define SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 SC_P_ENET1_RGMII_RXD1 0
+#define SC_P_ENET1_RGMII_RXD1_VPU_TSI_S0_DATA SC_P_ENET1_RGMII_RXD1 2
+#define SC_P_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 SC_P_ENET1_RGMII_RXD1 3
+#define SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 SC_P_ENET1_RGMII_RXD2 0
+#define SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RMII_RX_ER SC_P_ENET1_RGMII_RXD2 1
+#define SC_P_ENET1_RGMII_RXD2_VPU_TSI_S0_CLK SC_P_ENET1_RGMII_RXD2 2
+#define SC_P_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 SC_P_ENET1_RGMII_RXD2 3
+#define SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 SC_P_ENET1_RGMII_RXD3 0
+#define SC_P_ENET1_RGMII_RXD3_DMA_UART3_RX SC_P_ENET1_RGMII_RXD3 1
+#define SC_P_ENET1_RGMII_RXD3_VPU_TSI_S1_CLK SC_P_ENET1_RGMII_RXD3 2
+#define SC_P_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 SC_P_ENET1_RGMII_RXD3 3
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB 0
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA 0
+
+#endif /* SC_PADS_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index b2d5948..c450e11 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4498,7 +4498,6 @@
CONFIG_USB_EHCI_EXYNOS
CONFIG_USB_EHCI_FARADAY
CONFIG_USB_EHCI_KIRKWOOD
-CONFIG_USB_EHCI_MX5
CONFIG_USB_EHCI_MXC
CONFIG_USB_EHCI_MXS
CONFIG_USB_EHCI_SPEAR