armv8/ls1043aqds: add LS1043AQDS board support
LS1043AQDS Specification:
-------------------------
Memory subsystem:
* 2GByte DDR4 DIMM
* 128 Mbyte NOR flash single-chip memory
* 512 Mbyte NAND flash
* 16 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
Ethernet:
* Two RGMII ports
* XFI 10G port
* SGMII
* QSGMII with 4x 1G ports
PCIe: supports Gen 1 and Gen 2
SATA 3.0: one SATA 3.0 port
USB 3.0: two micro AB connector and one type A connector
UART: supports two UARTs up to 115200 bps for console
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
[York Sun: Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 6b8af14..f1bed51 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -7,7 +7,12 @@
#include <common.h>
#include <command.h>
#include <i2c.h>
+#include <asm/io.h>
+#ifdef CONFIG_LS1043A
+#include <asm/arch/immap_lsch2.h>
+#else
#include <asm/immap_85xx.h>
+#endif
#include "vid.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -240,7 +245,11 @@
* SoC before converting into an IR VID value
*/
vdd += board_vdd_drop_compensation();
+#ifdef CONFIG_LS1043A
+ vid = DIV_ROUND_UP(vdd - 265, 5);
+#else
vid = DIV_ROUND_UP(vdd - 245, 5);
+#endif
ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET,
1, (void *)&vid, sizeof(vid));
@@ -276,8 +285,12 @@
int adjust_vdd(ulong vdd_override)
{
int re_enable = disable_interrupts();
+#ifdef CONFIG_LS1043A
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#else
ccsr_gur_t __iomem *gur =
(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
u32 fusesr;
u8 vid;
int vdd_target, vdd_current, vdd_last;
@@ -352,12 +365,21 @@
* | T | | | | |
* ------------------------------------------------------
*/
+#ifdef CONFIG_LS1043A
+ vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK;
+ if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) {
+ vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
+ }
+#else
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
if ((vid == 0) || (vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK)) {
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
FSL_CORENET_DCFG_FUSESR_VID_MASK;
}
+#endif
vdd_target = vdd[vid];
/* check override variable for overriding VDD */